This patch series refactors all futex selftests to use kselftest_harness.h instead of futex's logging.h, as discussed here [1].
This allows to remove a lot of boilerplate code and to simplify some parts of the test logic, mainly when the test needs to exit early. The result of this is more than 500 lines removed from tools/testing/selftests/futex/. Also, this enables new tests to use kselftest.h features like ASSERT_s and such.
There are some caveats around this refactor: - logging.h had verbosity levels, while kselftest_harness.h doesn't. I created a new print function called ksft_print_dbg_msg() that prints the message if the user uses the -d flag, so now there's an equivalent of this feature. - futex_requeue_pi test accepted command line arguments to be used as test parameters (e.g. ./futex_requeue_pi -b -l -t 500000). This doesn't work with kselftest_harness.h because there's no straightforward way to send command line arguments to the test. I used FIXTURE_VARIANT() to achieve the same result, but now the parameters live inside of the test file, instead of on functional/run.sh. This increased a little bit the number of test cases for futex_requeue_pi, from 22 to 24. - test_harness_run() calls mmap(MAP_SHARED) before running the test and this has caused a side effect on test futex_numa_mpol.c. This test also calls mmap() and then try to access an address out of boundaries of this mapped memory for a "Memory out of range" subtest, where the kernel should return -EACCESS. After the refactor, the test address might be fall inside the first memory mapped region, thus being a valid address and succeeding the syscall, making the test fail. To fix that, I created a small "buffer zone" with mmap(PROT_NONE) between both mmaps.
I have compared the results of run.sh before and after this patchset and didn't find any regression from the test results.
Thanks, André
[1] https://lore.kernel.org/lkml/87ecv6p364.ffs@tglx/
--- André Almeida (15): selftests: kselftest: Create ksft_print_dbg_msg() selftests/futex: Refactor futex_requeue_pi with kselftest_harness.h selftests/futex: Refactor futex_requeue_pi_mismatched_ops with kselftest_harness.h selftests/futex: Refactor futex_requeue_pi_signal_restart with kselftest_harness.h selftests/futex: Refactor futex_wait_timeout with kselftest_harness.h selftests/futex: Refactor futex_wait_wouldblock with kselftest_harness.h selftests/futex: Refactor futex_wait_unitialized_heap with kselftest_harness.h selftests/futex: Refactor futex_wait_private_mapped_file with kselftest_harness.h selftests/futex: Refactor futex_wait with kselftest_harness.h selftests/futex: Refactor futex_requeue with kselftest_harness.h selftests/futex: Refactor futex_waitv with kselftest_harness.h selftests/futex: Refactor futex_priv_hash with kselftest_harness.h selftests/futex: Refactor futex_numa_mpol with kselftest_harness.h selftests/futex: Drop logging.h include from futex_numa selftests/futex: Remove logging.h file
tools/testing/selftests/futex/functional/Makefile | 3 +- .../selftests/futex/functional/futex_numa.c | 3 +- .../selftests/futex/functional/futex_numa_mpol.c | 57 ++--- .../selftests/futex/functional/futex_priv_hash.c | 79 +++---- .../selftests/futex/functional/futex_requeue.c | 76 ++---- .../selftests/futex/functional/futex_requeue_pi.c | 261 ++++++++++----------- .../functional/futex_requeue_pi_mismatched_ops.c | 80 ++----- .../functional/futex_requeue_pi_signal_restart.c | 129 +++------- .../selftests/futex/functional/futex_wait.c | 103 +++----- .../functional/futex_wait_private_mapped_file.c | 83 ++----- .../futex/functional/futex_wait_timeout.c | 139 +++++------ .../functional/futex_wait_uninitialized_heap.c | 76 ++---- .../futex/functional/futex_wait_wouldblock.c | 75 ++---- .../selftests/futex/functional/futex_waitv.c | 98 ++++---- tools/testing/selftests/futex/functional/run.sh | 62 +---- tools/testing/selftests/futex/include/logging.h | 148 ------------ tools/testing/selftests/kselftest.h | 13 + tools/testing/selftests/kselftest_harness.h | 13 +- 18 files changed, 491 insertions(+), 1007 deletions(-) --- base-commit: a24cc6ce1933eade12aa2b9859de0fcd2dac2c06 change-id: 20250703-tonyk-robust_test_cleanup-d1f3406365d9
Best regards,
Create ksft_print_dbg_msg() so testers can enable extra debug messages when running a test with the flag -d.
Signed-off-by: André Almeida andrealmeid@igalia.com --- tools/testing/selftests/kselftest.h | 13 +++++++++++++ tools/testing/selftests/kselftest_harness.h | 13 +++++++++---- 2 files changed, 22 insertions(+), 4 deletions(-)
diff --git a/tools/testing/selftests/kselftest.h b/tools/testing/selftests/kselftest.h index c3b6d2604b1e486af5a224a11386f75fe0a83495..c1851125de9cfdcdf3b11249572ebfb0751727f6 100644 --- a/tools/testing/selftests/kselftest.h +++ b/tools/testing/selftests/kselftest.h @@ -104,6 +104,7 @@ struct ksft_count {
static struct ksft_count ksft_cnt; static unsigned int ksft_plan; +static bool ksft_debug_enabled;
static inline unsigned int ksft_test_num(void) { @@ -175,6 +176,18 @@ static inline __printf(1, 2) void ksft_print_msg(const char *msg, ...) va_end(args); }
+static inline void ksft_print_dbg_msg(const char *msg, ...) +{ + va_list args; + + if (!ksft_debug_enabled) + return; + + va_start(args, msg); + ksft_print_msg(msg, args); + va_end(args); +} + static inline void ksft_perror(const char *msg) { ksft_print_msg("%s: %s (%d)\n", msg, strerror(errno), errno); diff --git a/tools/testing/selftests/kselftest_harness.h b/tools/testing/selftests/kselftest_harness.h index 2925e47db995d7197ed1f55bd9cc657669df9bd3..ffefd2704ca8f60f329b5d85870253fe26c61b52 100644 --- a/tools/testing/selftests/kselftest_harness.h +++ b/tools/testing/selftests/kselftest_harness.h @@ -1091,7 +1091,7 @@ static int test_harness_argv_check(int argc, char **argv) { int opt;
- while ((opt = getopt(argc, argv, "hlF:f:V:v:t:T:r:")) != -1) { + while ((opt = getopt(argc, argv, "dhlF:f:V:v:t:T:r:")) != -1) { switch (opt) { case 'f': case 'F': @@ -1104,12 +1104,16 @@ static int test_harness_argv_check(int argc, char **argv) case 'l': test_harness_list_tests(); return KSFT_SKIP; + case 'd': + ksft_debug_enabled = true; + break; case 'h': default: fprintf(stderr, - "Usage: %s [-h|-l] [-t|-T|-v|-V|-f|-F|-r name]\n" + "Usage: %s [-h|-l|-d] [-t|-T|-v|-V|-f|-F|-r name]\n" "\t-h print help\n" "\t-l list all tests\n" + "\t-d enable debug prints\n" "\n" "\t-t name include test\n" "\t-T name exclude test\n" @@ -1142,8 +1146,9 @@ static bool test_enabled(int argc, char **argv, int opt;
optind = 1; - while ((opt = getopt(argc, argv, "F:f:V:v:t:T:r:")) != -1) { - has_positive |= islower(opt); + while ((opt = getopt(argc, argv, "dF:f:V:v:t:T:r:")) != -1) { + if (opt != 'd') + has_positive |= islower(opt);
switch (tolower(opt)) { case 't':
Hi André,
kernel test robot noticed the following build errors:
[auto build test ERROR on a24cc6ce1933eade12aa2b9859de0fcd2dac2c06]
url: https://github.com/intel-lab-lkp/linux/commits/Andr-Almeida/selftests-kselft... base: a24cc6ce1933eade12aa2b9859de0fcd2dac2c06 patch link: https://lore.kernel.org/r/20250704-tonyk-robust_test_cleanup-v1-1-c0ff4f24c4... patch subject: [PATCH 01/15] selftests: kselftest: Create ksft_print_dbg_msg() config: x86_64-allyesconfig (https://download.01.org/0day-ci/archive/20250706/202507061039.0ZKQCW5y-lkp@i...) compiler: clang version 20.1.7 (https://github.com/llvm/llvm-project 6146a88f60492b520a36f8f8f3231e15f3cc6082) reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20250706/202507061039.0ZKQCW5y-lkp@i...)
If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot lkp@intel.com | Closes: https://lore.kernel.org/oe-kbuild-all/202507061039.0ZKQCW5y-lkp@intel.com/
All errors (new ones prefixed by >>):
In file included from samples/vfs/test-list-all-mounts.c:11: In file included from samples/vfs/../../tools/testing/selftests/pidfd/pidfd.h:19:
samples/vfs/../../tools/testing/selftests/pidfd/../kselftest.h:107:8: error: unknown type name 'bool'
107 | static bool ksft_debug_enabled; | ^ 1 error generated.
vim +/bool +107 samples/vfs/../../tools/testing/selftests/pidfd/../kselftest.h
104 105 static struct ksft_count ksft_cnt; 106 static unsigned int ksft_plan;
107 static bool ksft_debug_enabled;
108
To reduce the boilerplate code, refactor futex_requeue_pi test to use kselftest_harness header instead of futex's logging header.
Use kselftest fixture feature to make it easy to repeat the same test with different parameters. With that, drop all repetitive test calls from run.sh.
Signed-off-by: André Almeida andrealmeid@igalia.com --- .../selftests/futex/functional/futex_requeue_pi.c | 261 ++++++++++----------- tools/testing/selftests/futex/functional/run.sh | 26 +- 2 files changed, 122 insertions(+), 165 deletions(-)
diff --git a/tools/testing/selftests/futex/functional/futex_requeue_pi.c b/tools/testing/selftests/futex/functional/futex_requeue_pi.c index 215c6cb539b4abc7a48fb00b545ae26e52fd118a..699642f08a5d1324984ca94082cb040c04a97496 100644 --- a/tools/testing/selftests/futex/functional/futex_requeue_pi.c +++ b/tools/testing/selftests/futex/functional/futex_requeue_pi.c @@ -26,11 +26,11 @@ #include <stdlib.h> #include <signal.h> #include <string.h> + #include "atomic.h" #include "futextest.h" -#include "logging.h" +#include "../../kselftest_harness.h"
-#define TEST_NAME "futex-requeue-pi" #define MAX_WAKE_ITERS 1000 #define THREAD_MAX 10 #define SIGNAL_PERIOD_US 100 @@ -42,12 +42,6 @@ futex_t f1 = FUTEX_INITIALIZER; futex_t f2 = FUTEX_INITIALIZER; futex_t wake_complete = FUTEX_INITIALIZER;
-/* Test option defaults */ -static long timeout_ns; -static int broadcast; -static int owner; -static int locked; - struct thread_arg { long id; struct timespec *timeout; @@ -56,18 +50,73 @@ struct thread_arg { }; #define THREAD_ARG_INITIALIZER { 0, NULL, 0, 0 }
-void usage(char *prog) +FIXTURE(args) { - printf("Usage: %s\n", prog); - printf(" -b Broadcast wakeup (all waiters)\n"); - printf(" -c Use color\n"); - printf(" -h Display this help message\n"); - printf(" -l Lock the pi futex across requeue\n"); - printf(" -o Use a third party pi futex owner during requeue (cancels -l)\n"); - printf(" -t N Timeout in nanoseconds (default: 0)\n"); - printf(" -v L Verbosity level: %d=QUIET %d=CRITICAL %d=INFO\n", - VQUIET, VCRITICAL, VINFO); -} +}; + +FIXTURE_SETUP(args) +{ +}; + +FIXTURE_TEARDOWN(args) +{ +}; + +FIXTURE_VARIANT(args) +{ + long timeout_ns; + bool broadcast; + bool owner; + bool locked; +}; + +/* + * For a given timeout value, this macro creates a test input with all the + * possible combinations of valid arguments + */ +#define FIXTURE_VARIANT_ADD_TIMEOUT(timeout) \ + \ +FIXTURE_VARIANT_ADD(args, t_##timeout) \ +{ \ + .timeout_ns = timeout, \ +}; \ + \ +FIXTURE_VARIANT_ADD(args, t_##timeout##_broadcast) \ +{ \ + .timeout_ns = timeout, \ + .broadcast = true, \ +}; \ + \ +FIXTURE_VARIANT_ADD(args, t_##timeout##_broadcast_locked) \ +{ \ + .timeout_ns = timeout, \ + .broadcast = true, \ + .locked = true, \ +}; \ + \ +FIXTURE_VARIANT_ADD(args, t_##timeout##_broadcast_owner) \ +{ \ + .timeout_ns = timeout, \ + .broadcast = true, \ + .owner = true, \ +}; \ + \ +FIXTURE_VARIANT_ADD(args, t_##timeout##_locked) \ +{ \ + .timeout_ns = timeout, \ + .locked = true, \ +}; \ + \ +FIXTURE_VARIANT_ADD(args, t_##timeout##_owner) \ +{ \ + .timeout_ns = timeout, \ + .owner = true, \ +}; \ + +FIXTURE_VARIANT_ADD_TIMEOUT(0); +FIXTURE_VARIANT_ADD_TIMEOUT(5000); +FIXTURE_VARIANT_ADD_TIMEOUT(500000); +FIXTURE_VARIANT_ADD_TIMEOUT(2000000000);
int create_rt_thread(pthread_t *pth, void*(*func)(void *), void *arg, int policy, int prio) @@ -81,26 +130,26 @@ int create_rt_thread(pthread_t *pth, void*(*func)(void *), void *arg,
ret = pthread_attr_setinheritsched(&attr, PTHREAD_EXPLICIT_SCHED); if (ret) { - error("pthread_attr_setinheritsched\n", ret); + ksft_exit_fail_msg("pthread_attr_setinheritsched\n"); return -1; }
ret = pthread_attr_setschedpolicy(&attr, policy); if (ret) { - error("pthread_attr_setschedpolicy\n", ret); + ksft_exit_fail_msg("pthread_attr_setschedpolicy\n"); return -1; }
schedp.sched_priority = prio; ret = pthread_attr_setschedparam(&attr, &schedp); if (ret) { - error("pthread_attr_setschedparam\n", ret); + ksft_exit_fail_msg("pthread_attr_setschedparam\n"); return -1; }
ret = pthread_create(pth, &attr, func, arg); if (ret) { - error("pthread_create\n", ret); + ksft_exit_fail_msg("pthread_create\n"); return -1; } return 0; @@ -112,7 +161,7 @@ void *waiterfn(void *arg) struct thread_arg *args = (struct thread_arg *)arg; futex_t old_val;
- info("Waiter %ld: running\n", args->id); + ksft_print_dbg_msg("Waiter %ld: running\n", args->id); /* Each thread sleeps for a different amount of time * This is to avoid races, because we don't lock the * external mutex here */ @@ -120,26 +169,25 @@ void *waiterfn(void *arg)
old_val = f1; atomic_inc(&waiters_blocked); - info("Calling futex_wait_requeue_pi: %p (%u) -> %p\n", + ksft_print_dbg_msg("Calling futex_wait_requeue_pi: %p (%u) -> %p\n", &f1, f1, &f2); args->ret = futex_wait_requeue_pi(&f1, old_val, &f2, args->timeout, FUTEX_PRIVATE_FLAG);
- info("waiter %ld woke with %d %s\n", args->id, args->ret, + ksft_print_dbg_msg("waiter %ld woke with %d %s\n", args->id, args->ret, args->ret < 0 ? strerror(errno) : ""); atomic_inc(&waiters_woken); if (args->ret < 0) { if (args->timeout && errno == ETIMEDOUT) args->ret = 0; else { - args->ret = RET_ERROR; - error("futex_wait_requeue_pi\n", errno); + ksft_exit_fail_msg("futex_wait_requeue_pi\n"); } futex_lock_pi(&f2, NULL, 0, FUTEX_PRIVATE_FLAG); } futex_unlock_pi(&f2, FUTEX_PRIVATE_FLAG);
- info("Waiter %ld: exiting with %d\n", args->id, args->ret); + ksft_print_dbg_msg("Waiter %ld: exiting with %d\n", args->id, args->ret); pthread_exit((void *)&args->ret); }
@@ -152,14 +200,14 @@ void *broadcast_wakerfn(void *arg) int nr_wake = 1; int i = 0;
- info("Waker: waiting for waiters to block\n"); + ksft_print_dbg_msg("Waker: waiting for waiters to block\n"); while (waiters_blocked.val < THREAD_MAX) usleep(1000); usleep(1000);
- info("Waker: Calling broadcast\n"); + ksft_print_dbg_msg("Waker: Calling broadcast\n"); if (args->lock) { - info("Calling FUTEX_LOCK_PI on mutex=%x @ %p\n", f2, &f2); + ksft_print_dbg_msg("Calling FUTEX_LOCK_PI on mutex=%x @ %p\n", f2, &f2); futex_lock_pi(&f2, NULL, 0, FUTEX_PRIVATE_FLAG); } continue_requeue: @@ -167,16 +215,14 @@ void *broadcast_wakerfn(void *arg) args->ret = futex_cmp_requeue_pi(&f1, old_val, &f2, nr_wake, nr_requeue, FUTEX_PRIVATE_FLAG); if (args->ret < 0) { - args->ret = RET_ERROR; - error("FUTEX_CMP_REQUEUE_PI failed\n", errno); + ksft_exit_fail_msg("FUTEX_CMP_REQUEUE_PI failed\n"); } else if (++i < MAX_WAKE_ITERS) { task_count += args->ret; if (task_count < THREAD_MAX - waiters_woken.val) goto continue_requeue; } else { - error("max broadcast iterations (%d) reached with %d/%d tasks woken or requeued\n", - 0, MAX_WAKE_ITERS, task_count, THREAD_MAX); - args->ret = RET_ERROR; + ksft_exit_fail_msg("max broadcast iterations (%d) reached with %d/%d tasks woken or requeued\n", + MAX_WAKE_ITERS, task_count, THREAD_MAX); }
futex_wake(&wake_complete, 1, FUTEX_PRIVATE_FLAG); @@ -187,7 +233,7 @@ void *broadcast_wakerfn(void *arg) if (args->ret > 0) args->ret = task_count;
- info("Waker: exiting with %d\n", args->ret); + ksft_print_dbg_msg("Waker: exiting with %d\n", args->ret); pthread_exit((void *)&args->ret); }
@@ -200,20 +246,20 @@ void *signal_wakerfn(void *arg) int nr_wake = 1; int i = 0;
- info("Waker: waiting for waiters to block\n"); + ksft_print_dbg_msg("Waker: waiting for waiters to block\n"); while (waiters_blocked.val < THREAD_MAX) usleep(1000); usleep(1000);
while (task_count < THREAD_MAX && waiters_woken.val < THREAD_MAX) { - info("task_count: %d, waiters_woken: %d\n", + ksft_print_dbg_msg("task_count: %d, waiters_woken: %d\n", task_count, waiters_woken.val); if (args->lock) { - info("Calling FUTEX_LOCK_PI on mutex=%x @ %p\n", - f2, &f2); + ksft_print_dbg_msg("Calling FUTEX_LOCK_PI on mutex=%x @ %p\n", + f2, &f2); futex_lock_pi(&f2, NULL, 0, FUTEX_PRIVATE_FLAG); } - info("Waker: Calling signal\n"); + ksft_print_dbg_msg("Waker: Calling signal\n"); /* cond_signal */ old_val = f1; args->ret = futex_cmp_requeue_pi(&f1, old_val, &f2, @@ -221,28 +267,23 @@ void *signal_wakerfn(void *arg) FUTEX_PRIVATE_FLAG); if (args->ret < 0) args->ret = -errno; - info("futex: %x\n", f2); + ksft_print_dbg_msg("futex: %x\n", f2); if (args->lock) { - info("Calling FUTEX_UNLOCK_PI on mutex=%x @ %p\n", - f2, &f2); + ksft_print_dbg_msg("Calling FUTEX_UNLOCK_PI on mutex=%x @ %p\n", + f2, &f2); futex_unlock_pi(&f2, FUTEX_PRIVATE_FLAG); } - info("futex: %x\n", f2); - if (args->ret < 0) { - error("FUTEX_CMP_REQUEUE_PI failed\n", errno); - args->ret = RET_ERROR; - break; - } + ksft_print_dbg_msg("futex: %x\n", f2); + if (args->ret < 0) + ksft_exit_fail_msg("FUTEX_CMP_REQUEUE_PI failed\n");
task_count += args->ret; usleep(SIGNAL_PERIOD_US); i++; /* we have to loop at least THREAD_MAX times */ if (i > MAX_WAKE_ITERS + THREAD_MAX) { - error("max signaling iterations (%d) reached, giving up on pending waiters.\n", - 0, MAX_WAKE_ITERS + THREAD_MAX); - args->ret = RET_ERROR; - break; + ksft_exit_fail_msg("max signaling iterations (%d) reached, giving up on pending waiters.\n", + MAX_WAKE_ITERS + THREAD_MAX); } }
@@ -251,8 +292,8 @@ void *signal_wakerfn(void *arg) if (args->ret >= 0) args->ret = task_count;
- info("Waker: exiting with %d\n", args->ret); - info("Waker: waiters_woken: %d\n", waiters_woken.val); + ksft_print_dbg_msg("Waker: exiting with %d\n", args->ret); + ksft_print_dbg_msg("Waker: waiters_woken: %d\n", waiters_woken.val); pthread_exit((void *)&args->ret); }
@@ -269,15 +310,13 @@ void *third_party_blocker(void *arg) ret2 = futex_unlock_pi(&f2, FUTEX_PRIVATE_FLAG);
out: - if (args->ret || ret2) { - error("third_party_blocker() futex error", 0); - args->ret = RET_ERROR; - } + if (args->ret || ret2) + ksft_exit_fail_msg("third_party_blocker() futex error");
pthread_exit((void *)&args->ret); }
-int unit_test(int broadcast, long lock, int third_party_owner, long timeout_ns) +TEST_F(args, futex_requeue_pi) { void *(*wakerfn)(void *) = signal_wakerfn; struct thread_arg blocker_arg = THREAD_ARG_INITIALIZER; @@ -286,18 +325,26 @@ int unit_test(int broadcast, long lock, int third_party_owner, long timeout_ns) struct timespec ts, *tsp = NULL; struct thread_arg args[THREAD_MAX]; int *waiter_ret; - int i, ret = RET_PASS; + int i, ret = 0; + bool lock = variant->locked; + bool third_party_owner = variant->owner; + bool broadcast = variant->broadcast; + long timeout_ns = variant->timeout_ns; + + ksft_print_msg( + "\tArguments: broadcast=%d locked=%d owner=%d timeout=%ldns\n", + broadcast, lock, third_party_owner, timeout_ns);
if (timeout_ns) { time_t secs;
- info("timeout_ns = %ld\n", timeout_ns); + ksft_print_dbg_msg("timeout_ns = %ld\n", timeout_ns); ret = clock_gettime(CLOCK_MONOTONIC, &ts); secs = (ts.tv_nsec + timeout_ns) / 1000000000; ts.tv_nsec = ((int64_t)ts.tv_nsec + timeout_ns) % 1000000000; ts.tv_sec += secs; - info("ts.tv_sec = %ld\n", ts.tv_sec); - info("ts.tv_nsec = %ld\n", ts.tv_nsec); + ksft_print_dbg_msg("ts.tv_sec = %ld\n", ts.tv_sec); + ksft_print_dbg_msg("ts.tv_nsec = %ld\n", ts.tv_nsec); tsp = &ts; }
@@ -307,10 +354,7 @@ int unit_test(int broadcast, long lock, int third_party_owner, long timeout_ns) if (third_party_owner) { if (create_rt_thread(&blocker, third_party_blocker, (void *)&blocker_arg, SCHED_FIFO, 1)) { - error("Creating third party blocker thread failed\n", - errno); - ret = RET_ERROR; - goto out; + ksft_exit_fail_msg("Creating third party blocker thread failed\n"); } }
@@ -318,20 +362,16 @@ int unit_test(int broadcast, long lock, int third_party_owner, long timeout_ns) for (i = 0; i < THREAD_MAX; i++) { args[i].id = i; args[i].timeout = tsp; - info("Starting thread %d\n", i); + ksft_print_dbg_msg("Starting thread %d\n", i); if (create_rt_thread(&waiter[i], waiterfn, (void *)&args[i], SCHED_FIFO, 1)) { - error("Creating waiting thread failed\n", errno); - ret = RET_ERROR; - goto out; + ksft_exit_fail_msg("Creating waiting thread failed\n"); } } waker_arg.lock = lock; if (create_rt_thread(&waker, wakerfn, (void *)&waker_arg, SCHED_FIFO, 1)) { - error("Creating waker thread failed\n", errno); - ret = RET_ERROR; - goto out; + ksft_exit_fail_msg("Creating waker thread failed\n"); }
/* Wait for threads to finish */ @@ -345,7 +385,6 @@ int unit_test(int broadcast, long lock, int third_party_owner, long timeout_ns) pthread_join(blocker, NULL); pthread_join(waker, NULL);
-out: if (!ret) { if (*waiter_ret) ret = *waiter_ret; @@ -355,66 +394,8 @@ int unit_test(int broadcast, long lock, int third_party_owner, long timeout_ns) ret = blocker_arg.ret; }
- return ret; + if (ret) + ksft_test_result_fail("fail"); }
-int main(int argc, char *argv[]) -{ - char *test_name; - int c, ret; - - while ((c = getopt(argc, argv, "bchlot:v:")) != -1) { - switch (c) { - case 'b': - broadcast = 1; - break; - case 'c': - log_color(1); - break; - case 'h': - usage(basename(argv[0])); - exit(0); - case 'l': - locked = 1; - break; - case 'o': - owner = 1; - locked = 0; - break; - case 't': - timeout_ns = atoi(optarg); - break; - case 'v': - log_verbosity(atoi(optarg)); - break; - default: - usage(basename(argv[0])); - exit(1); - } - } - - ksft_print_header(); - ksft_set_plan(1); - ksft_print_msg("%s: Test requeue functionality\n", basename(argv[0])); - ksft_print_msg( - "\tArguments: broadcast=%d locked=%d owner=%d timeout=%ldns\n", - broadcast, locked, owner, timeout_ns); - - ret = asprintf(&test_name, - "%s broadcast=%d locked=%d owner=%d timeout=%ldns", - TEST_NAME, broadcast, locked, owner, timeout_ns); - if (ret < 0) { - ksft_print_msg("Failed to generate test name\n"); - test_name = TEST_NAME; - } - - /* - * FIXME: unit_test is obsolete now that we parse options and the - * various style of runs are done by run.sh - simplify the code and move - * unit_test into main() - */ - ret = unit_test(broadcast, locked, owner, timeout_ns); - - print_result(test_name, ret); - return ret; -} +TEST_HARNESS_MAIN diff --git a/tools/testing/selftests/futex/functional/run.sh b/tools/testing/selftests/futex/functional/run.sh index 81739849f2994d52c336df00f1072db71b35573a..49edfad884869c7dffce2f482c434003b9cc49d1 100755 --- a/tools/testing/selftests/futex/functional/run.sh +++ b/tools/testing/selftests/futex/functional/run.sh @@ -32,31 +32,7 @@ fi
echo -# requeue pi testing -# without timeouts -./futex_requeue_pi $COLOR -./futex_requeue_pi $COLOR -b -./futex_requeue_pi $COLOR -b -l -./futex_requeue_pi $COLOR -b -o -./futex_requeue_pi $COLOR -l -./futex_requeue_pi $COLOR -o -# with timeouts -./futex_requeue_pi $COLOR -b -l -t 5000 -./futex_requeue_pi $COLOR -l -t 5000 -./futex_requeue_pi $COLOR -b -l -t 500000 -./futex_requeue_pi $COLOR -l -t 500000 -./futex_requeue_pi $COLOR -b -t 5000 -./futex_requeue_pi $COLOR -t 5000 -./futex_requeue_pi $COLOR -b -t 500000 -./futex_requeue_pi $COLOR -t 500000 -./futex_requeue_pi $COLOR -b -o -t 5000 -./futex_requeue_pi $COLOR -l -t 5000 -./futex_requeue_pi $COLOR -b -o -t 500000 -./futex_requeue_pi $COLOR -l -t 500000 -# with long timeout -./futex_requeue_pi $COLOR -b -l -t 2000000000 -./futex_requeue_pi $COLOR -l -t 2000000000 - +./futex_requeue_pi
echo ./futex_requeue_pi_mismatched_ops $COLOR
To reduce the boilerplate code, refactor futex_requeue_pi_mismatched_ops test to use kselftest_harness header instead of futex's logging header.
Signed-off-by: André Almeida andrealmeid@igalia.com --- .../functional/futex_requeue_pi_mismatched_ops.c | 80 +++++----------------- tools/testing/selftests/futex/functional/run.sh | 2 +- 2 files changed, 19 insertions(+), 63 deletions(-)
diff --git a/tools/testing/selftests/futex/functional/futex_requeue_pi_mismatched_ops.c b/tools/testing/selftests/futex/functional/futex_requeue_pi_mismatched_ops.c index d0a4d332ea44131d5e78a4c7d0cd36d36ae468d2..a956fdf931b3b50b25ed71d9034a5f1a5001f77e 100644 --- a/tools/testing/selftests/futex/functional/futex_requeue_pi_mismatched_ops.c +++ b/tools/testing/selftests/futex/functional/futex_requeue_pi_mismatched_ops.c @@ -23,67 +23,32 @@ #include <stdlib.h> #include <string.h> #include <time.h> -#include "futextest.h" -#include "logging.h"
-#define TEST_NAME "futex-requeue-pi-mismatched-ops" +#include "futextest.h" +#include "../../kselftest_harness.h"
futex_t f1 = FUTEX_INITIALIZER; futex_t f2 = FUTEX_INITIALIZER; int child_ret = 0;
-void usage(char *prog) -{ - printf("Usage: %s\n", prog); - printf(" -c Use color\n"); - printf(" -h Display this help message\n"); - printf(" -v L Verbosity level: %d=QUIET %d=CRITICAL %d=INFO\n", - VQUIET, VCRITICAL, VINFO); -} - void *blocking_child(void *arg) { child_ret = futex_wait(&f1, f1, NULL, FUTEX_PRIVATE_FLAG); if (child_ret < 0) { child_ret = -errno; - error("futex_wait\n", errno); + ksft_exit_fail_msg("futex_wait\n"); } return (void *)&child_ret; }
-int main(int argc, char *argv[]) +TEST(requeue_pi_mismatched_ops) { - int ret = RET_PASS; pthread_t child; - int c; + int ret;
- while ((c = getopt(argc, argv, "chv:")) != -1) { - switch (c) { - case 'c': - log_color(1); - break; - case 'h': - usage(basename(argv[0])); - exit(0); - case 'v': - log_verbosity(atoi(optarg)); - break; - default: - usage(basename(argv[0])); - exit(1); - } - } - - ksft_print_header(); - ksft_set_plan(1); - ksft_print_msg("%s: Detect mismatched requeue_pi operations\n", - basename(argv[0])); + if (pthread_create(&child, NULL, blocking_child, NULL)) + ksft_exit_fail_msg("pthread_create\n");
- if (pthread_create(&child, NULL, blocking_child, NULL)) { - error("pthread_create\n", errno); - ret = RET_ERROR; - goto out; - } /* Allow the child to block in the kernel. */ sleep(1);
@@ -102,34 +67,25 @@ int main(int argc, char *argv[]) * FUTEX_WAKE. */ ret = futex_wake(&f1, 1, FUTEX_PRIVATE_FLAG); - if (ret == 1) { - ret = RET_PASS; - } else if (ret < 0) { - error("futex_wake\n", errno); - ret = RET_ERROR; - } else { - error("futex_wake did not wake the child\n", 0); - ret = RET_ERROR; - } + if (ret == 1) + ksft_test_result_pass("pass"); + else if (ret < 0) + ksft_exit_fail_msg("futex_wake\n"); + else + ksft_exit_fail_msg("futex_wake did not wake the child\n"); } else { - error("futex_cmp_requeue_pi\n", errno); - ret = RET_ERROR; + ksft_exit_fail_msg("futex_cmp_requeue_pi\n"); } } else if (ret > 0) { - fail("futex_cmp_requeue_pi failed to detect the mismatch\n"); - ret = RET_FAIL; + ksft_test_result_fail("futex_cmp_requeue_pi failed to detect the mismatch\n"); } else { - error("futex_cmp_requeue_pi found no waiters\n", 0); - ret = RET_ERROR; + ksft_exit_fail_msg("futex_cmp_requeue_pi found no waiters\n"); }
pthread_join(child, NULL);
if (!ret) ret = child_ret; - - out: - /* If the kernel crashes, we shouldn't return at all. */ - print_result(TEST_NAME, ret); - return ret; } + +TEST_HARNESS_MAIN diff --git a/tools/testing/selftests/futex/functional/run.sh b/tools/testing/selftests/futex/functional/run.sh index 49edfad884869c7dffce2f482c434003b9cc49d1..f9d598ef43ec3fb7580ab59bf6fc70b6ecd8a82d 100755 --- a/tools/testing/selftests/futex/functional/run.sh +++ b/tools/testing/selftests/futex/functional/run.sh @@ -35,7 +35,7 @@ echo ./futex_requeue_pi
echo -./futex_requeue_pi_mismatched_ops $COLOR +./futex_requeue_pi_mismatched_ops
echo ./futex_requeue_pi_signal_restart $COLOR
To reduce the boilerplate code, refactor futex_requeue_pi_signal_restart test to use kselftest_harness header instead of futex's logging header.
Signed-off-by: André Almeida andrealmeid@igalia.com --- .../functional/futex_requeue_pi_signal_restart.c | 129 ++++++--------------- tools/testing/selftests/futex/functional/run.sh | 2 +- 2 files changed, 38 insertions(+), 93 deletions(-)
diff --git a/tools/testing/selftests/futex/functional/futex_requeue_pi_signal_restart.c b/tools/testing/selftests/futex/functional/futex_requeue_pi_signal_restart.c index c6b8f32990c87587551b14577b200e62c56af223..e34ee0f9ebccdb2cd2984e48acf157245b12848f 100644 --- a/tools/testing/selftests/futex/functional/futex_requeue_pi_signal_restart.c +++ b/tools/testing/selftests/futex/functional/futex_requeue_pi_signal_restart.c @@ -24,11 +24,11 @@ #include <stdio.h> #include <stdlib.h> #include <string.h> + #include "atomic.h" #include "futextest.h" -#include "logging.h" +#include "../../kselftest_harness.h"
-#define TEST_NAME "futex-requeue-pi-signal-restart" #define DELAY_US 100
futex_t f1 = FUTEX_INITIALIZER; @@ -37,15 +37,6 @@ atomic_t requeued = ATOMIC_INITIALIZER;
int waiter_ret = 0;
-void usage(char *prog) -{ - printf("Usage: %s\n", prog); - printf(" -c Use color\n"); - printf(" -h Display this help message\n"); - printf(" -v L Verbosity level: %d=QUIET %d=CRITICAL %d=INFO\n", - VQUIET, VCRITICAL, VINFO); -} - int create_rt_thread(pthread_t *pth, void*(*func)(void *), void *arg, int policy, int prio) { @@ -57,35 +48,28 @@ int create_rt_thread(pthread_t *pth, void*(*func)(void *), void *arg, memset(&schedp, 0, sizeof(schedp));
ret = pthread_attr_setinheritsched(&attr, PTHREAD_EXPLICIT_SCHED); - if (ret) { - error("pthread_attr_setinheritsched\n", ret); - return -1; - } + if (ret) + ksft_exit_fail_msg("pthread_attr_setinheritsched\n");
ret = pthread_attr_setschedpolicy(&attr, policy); - if (ret) { - error("pthread_attr_setschedpolicy\n", ret); - return -1; - } + if (ret) + ksft_exit_fail_msg("pthread_attr_setschedpolicy\n");
schedp.sched_priority = prio; ret = pthread_attr_setschedparam(&attr, &schedp); - if (ret) { - error("pthread_attr_setschedparam\n", ret); - return -1; - } + if (ret) + ksft_exit_fail_msg("pthread_attr_setschedparam\n");
ret = pthread_create(pth, &attr, func, arg); - if (ret) { - error("pthread_create\n", ret); - return -1; - } + if (ret) + ksft_exit_fail_msg("pthread_create\n"); + return 0; }
void handle_signal(int signo) { - info("signal received %s requeue\n", + ksft_print_dbg_msg("signal received %s requeue\n", requeued.val ? "after" : "prior to"); }
@@ -94,78 +78,46 @@ void *waiterfn(void *arg) unsigned int old_val; int res;
- waiter_ret = RET_PASS; - - info("Waiter running\n"); - info("Calling FUTEX_LOCK_PI on f2=%x @ %p\n", f2, &f2); + ksft_print_dbg_msg("Waiter running\n"); + ksft_print_dbg_msg("Calling FUTEX_LOCK_PI on f2=%x @ %p\n", f2, &f2); old_val = f1; res = futex_wait_requeue_pi(&f1, old_val, &(f2), NULL, FUTEX_PRIVATE_FLAG); if (!requeued.val || errno != EWOULDBLOCK) { - fail("unexpected return from futex_wait_requeue_pi: %d (%s)\n", + ksft_test_result_fail("unexpected return from futex_wait_requeue_pi: %d (%s)\n", res, strerror(errno)); - info("w2:futex: %x\n", f2); + ksft_print_dbg_msg("w2:futex: %x\n", f2); if (!res) futex_unlock_pi(&f2, FUTEX_PRIVATE_FLAG); - waiter_ret = RET_FAIL; }
- info("Waiter exiting with %d\n", waiter_ret); pthread_exit(NULL); }
-int main(int argc, char *argv[]) +TEST(futex_requeue_pi_signal_restart) { unsigned int old_val; struct sigaction sa; pthread_t waiter; - int c, res, ret = RET_PASS; - - while ((c = getopt(argc, argv, "chv:")) != -1) { - switch (c) { - case 'c': - log_color(1); - break; - case 'h': - usage(basename(argv[0])); - exit(0); - case 'v': - log_verbosity(atoi(optarg)); - break; - default: - usage(basename(argv[0])); - exit(1); - } - } - - ksft_print_header(); - ksft_set_plan(1); - ksft_print_msg("%s: Test signal handling during requeue_pi\n", - basename(argv[0])); - ksft_print_msg("\tArguments: <none>\n"); + int res;
sa.sa_handler = handle_signal; sigemptyset(&sa.sa_mask); sa.sa_flags = 0; - if (sigaction(SIGUSR1, &sa, NULL)) { - error("sigaction\n", errno); - exit(1); - } + if (sigaction(SIGUSR1, &sa, NULL)) + ksft_exit_fail_msg("sigaction\n");
- info("m1:f2: %x\n", f2); - info("Creating waiter\n"); + ksft_print_dbg_msg("m1:f2: %x\n", f2); + ksft_print_dbg_msg("Creating waiter\n"); res = create_rt_thread(&waiter, waiterfn, NULL, SCHED_FIFO, 1); - if (res) { - error("Creating waiting thread failed", res); - ret = RET_ERROR; - goto out; - } + if (res) + ksft_exit_fail_msg("Creating waiting thread failed");
- info("Calling FUTEX_LOCK_PI on f2=%x @ %p\n", f2, &f2); - info("m2:f2: %x\n", f2); + ksft_print_dbg_msg("Calling FUTEX_LOCK_PI on f2=%x @ %p\n", f2, &f2); + ksft_print_dbg_msg("m2:f2: %x\n", f2); futex_lock_pi(&f2, 0, 0, FUTEX_PRIVATE_FLAG); - info("m3:f2: %x\n", f2); + ksft_print_dbg_msg("m3:f2: %x\n", f2);
while (1) { /* @@ -173,11 +125,11 @@ int main(int argc, char *argv[]) * restart futex_wait_requeue_pi() in the kernel. Wait for the * waiter to block on f1 again. */ - info("Issuing SIGUSR1 to waiter\n"); + ksft_print_dbg_msg("Issuing SIGUSR1 to waiter\n"); pthread_kill(waiter, SIGUSR1); usleep(DELAY_US);
- info("Requeueing waiter via FUTEX_CMP_REQUEUE_PI\n"); + ksft_print_dbg_msg("Requeueing waiter via FUTEX_CMP_REQUEUE_PI\n"); old_val = f1; res = futex_cmp_requeue_pi(&f1, old_val, &(f2), 1, 0, FUTEX_PRIVATE_FLAG); @@ -191,12 +143,10 @@ int main(int argc, char *argv[]) atomic_set(&requeued, 1); break; } else if (res < 0) { - error("FUTEX_CMP_REQUEUE_PI failed\n", errno); - ret = RET_ERROR; - break; + ksft_exit_fail_msg("FUTEX_CMP_REQUEUE_PI failed\n"); } } - info("m4:f2: %x\n", f2); + ksft_print_dbg_msg("m4:f2: %x\n", f2);
/* * Signal the waiter after requeue, waiter should return from @@ -204,19 +154,14 @@ int main(int argc, char *argv[]) * futex_unlock_pi() can't happen before the signal wakeup is detected * in the kernel. */ - info("Issuing SIGUSR1 to waiter\n"); + ksft_print_dbg_msg("Issuing SIGUSR1 to waiter\n"); pthread_kill(waiter, SIGUSR1); - info("Waiting for waiter to return\n"); + ksft_print_dbg_msg("Waiting for waiter to return\n"); pthread_join(waiter, NULL);
- info("Calling FUTEX_UNLOCK_PI on mutex=%x @ %p\n", f2, &f2); + ksft_print_dbg_msg("Calling FUTEX_UNLOCK_PI on mutex=%x @ %p\n", f2, &f2); futex_unlock_pi(&f2, FUTEX_PRIVATE_FLAG); - info("m5:f2: %x\n", f2); - - out: - if (ret == RET_PASS && waiter_ret) - ret = waiter_ret; - - print_result(TEST_NAME, ret); - return ret; + ksft_print_dbg_msg("m5:f2: %x\n", f2); } + +TEST_HARNESS_MAIN diff --git a/tools/testing/selftests/futex/functional/run.sh b/tools/testing/selftests/futex/functional/run.sh index f9d598ef43ec3fb7580ab59bf6fc70b6ecd8a82d..37f614e7d7fd3ce9741861e23df40f87139f572a 100755 --- a/tools/testing/selftests/futex/functional/run.sh +++ b/tools/testing/selftests/futex/functional/run.sh @@ -38,7 +38,7 @@ echo ./futex_requeue_pi_mismatched_ops
echo -./futex_requeue_pi_signal_restart $COLOR +./futex_requeue_pi_signal_restart
echo ./futex_wait_timeout $COLOR
To reduce the boilerplate code, refactor futex_wait_timeout test to use kselftest_harness header instead of futex's logging header.
Signed-off-by: André Almeida andrealmeid@igalia.com --- .../futex/functional/futex_wait_timeout.c | 139 +++++++++------------ tools/testing/selftests/futex/functional/run.sh | 2 +- 2 files changed, 61 insertions(+), 80 deletions(-)
diff --git a/tools/testing/selftests/futex/functional/futex_wait_timeout.c b/tools/testing/selftests/futex/functional/futex_wait_timeout.c index d183f878360bcd04c72565510c116808b3e82347..ee01e49b1b3fa62dbad87f80b6937816fcb110ac 100644 --- a/tools/testing/selftests/futex/functional/futex_wait_timeout.c +++ b/tools/testing/selftests/futex/functional/futex_wait_timeout.c @@ -16,26 +16,15 @@ *****************************************************************************/
#include <pthread.h> + #include "futextest.h" #include "futex2test.h" -#include "logging.h" - -#define TEST_NAME "futex-wait-timeout" +#include "../../kselftest_harness.h"
static long timeout_ns = 100000; /* 100us default timeout */ static futex_t futex_pi; static pthread_barrier_t barrier;
-void usage(char *prog) -{ - printf("Usage: %s\n", prog); - printf(" -c Use color\n"); - printf(" -h Display this help message\n"); - printf(" -t N Timeout in nanoseconds (default: 100,000)\n"); - printf(" -v L Verbosity level: %d=QUIET %d=CRITICAL %d=INFO\n", - VQUIET, VCRITICAL, VINFO); -} - /* * Get a PI lock and hold it forever, so the main thread lock_pi will block * and we can test the timeout @@ -47,13 +36,13 @@ void *get_pi_lock(void *arg)
ret = futex_lock_pi(&futex_pi, NULL, 0, 0); if (ret != 0) - error("futex_lock_pi failed\n", ret); + ksft_exit_fail_msg("futex_lock_pi failed\n");
pthread_barrier_wait(&barrier);
/* Blocks forever */ ret = futex_wait(&lock, 0, NULL, 0); - error("futex_wait failed\n", ret); + ksft_exit_fail_msg("futex_wait failed\n");
return NULL; } @@ -61,12 +50,11 @@ void *get_pi_lock(void *arg) /* * Check if the function returned the expected error */ -static void test_timeout(int res, int *ret, char *test_name, int err) +static void test_timeout(int res, char *test_name, int err) { if (!res || errno != err) { ksft_test_result_fail("%s returned %d\n", test_name, res < 0 ? errno : res); - *ret = RET_FAIL; } else { ksft_test_result_pass("%s succeeds\n", test_name); } @@ -78,10 +66,8 @@ static void test_timeout(int res, int *ret, char *test_name, int err) static int futex_get_abs_timeout(clockid_t clockid, struct timespec *to, long timeout_ns) { - if (clock_gettime(clockid, to)) { - error("clock_gettime failed\n", errno); - return errno; - } + if (clock_gettime(clockid, to)) + ksft_exit_fail_msg("clock_gettime failed\n");
to->tv_nsec += timeout_ns;
@@ -93,83 +79,66 @@ static int futex_get_abs_timeout(clockid_t clockid, struct timespec *to, return 0; }
-int main(int argc, char *argv[]) +TEST(wait_bitset) { futex_t f1 = FUTEX_INITIALIZER; - int res, ret = RET_PASS; struct timespec to; - pthread_t thread; - int c; - struct futex_waitv waitv = { - .uaddr = (uintptr_t)&f1, - .val = f1, - .flags = FUTEX_32, - .__reserved = 0 - }; - - while ((c = getopt(argc, argv, "cht:v:")) != -1) { - switch (c) { - case 'c': - log_color(1); - break; - case 'h': - usage(basename(argv[0])); - exit(0); - case 't': - timeout_ns = atoi(optarg); - break; - case 'v': - log_verbosity(atoi(optarg)); - break; - default: - usage(basename(argv[0])); - exit(1); - } - } - - ksft_print_header(); - ksft_set_plan(9); - ksft_print_msg("%s: Block on a futex and wait for timeout\n", - basename(argv[0])); - ksft_print_msg("\tArguments: timeout=%ldns\n", timeout_ns); - - pthread_barrier_init(&barrier, NULL, 2); - pthread_create(&thread, NULL, get_pi_lock, NULL); + int res;
/* initialize relative timeout */ to.tv_sec = 0; to.tv_nsec = timeout_ns;
res = futex_wait(&f1, f1, &to, 0); - test_timeout(res, &ret, "futex_wait relative", ETIMEDOUT); + test_timeout(res, "futex_wait relative", ETIMEDOUT);
/* FUTEX_WAIT_BITSET with CLOCK_REALTIME */ if (futex_get_abs_timeout(CLOCK_REALTIME, &to, timeout_ns)) - return RET_FAIL; + ksft_test_result_error("get_time error"); res = futex_wait_bitset(&f1, f1, &to, 1, FUTEX_CLOCK_REALTIME); - test_timeout(res, &ret, "futex_wait_bitset realtime", ETIMEDOUT); + test_timeout(res, "futex_wait_bitset realtime", ETIMEDOUT);
/* FUTEX_WAIT_BITSET with CLOCK_MONOTONIC */ if (futex_get_abs_timeout(CLOCK_MONOTONIC, &to, timeout_ns)) - return RET_FAIL; + ksft_test_result_error("get_time error"); res = futex_wait_bitset(&f1, f1, &to, 1, 0); - test_timeout(res, &ret, "futex_wait_bitset monotonic", ETIMEDOUT); + test_timeout(res, "futex_wait_bitset monotonic", ETIMEDOUT); +} + +TEST(requeue_pi) +{ + futex_t f1 = FUTEX_INITIALIZER; + struct timespec to; + int res;
/* FUTEX_WAIT_REQUEUE_PI with CLOCK_REALTIME */ if (futex_get_abs_timeout(CLOCK_REALTIME, &to, timeout_ns)) - return RET_FAIL; + ksft_test_result_error("get_time error"); res = futex_wait_requeue_pi(&f1, f1, &futex_pi, &to, FUTEX_CLOCK_REALTIME); - test_timeout(res, &ret, "futex_wait_requeue_pi realtime", ETIMEDOUT); + test_timeout(res, "futex_wait_requeue_pi realtime", ETIMEDOUT);
/* FUTEX_WAIT_REQUEUE_PI with CLOCK_MONOTONIC */ if (futex_get_abs_timeout(CLOCK_MONOTONIC, &to, timeout_ns)) - return RET_FAIL; + ksft_test_result_error("get_time error"); res = futex_wait_requeue_pi(&f1, f1, &futex_pi, &to, 0); - test_timeout(res, &ret, "futex_wait_requeue_pi monotonic", ETIMEDOUT); + test_timeout(res, "futex_wait_requeue_pi monotonic", ETIMEDOUT); + +} + +TEST(lock_pi) +{ + struct timespec to; + pthread_t thread; + int res; + + /* Create a thread that will lock forever so any waiter will timeout */ + pthread_barrier_init(&barrier, NULL, 2); + pthread_create(&thread, NULL, get_pi_lock, NULL);
/* Wait until the other thread calls futex_lock_pi() */ pthread_barrier_wait(&barrier); pthread_barrier_destroy(&barrier); + /* * FUTEX_LOCK_PI with CLOCK_REALTIME * Due to historical reasons, FUTEX_LOCK_PI supports only realtime @@ -181,26 +150,38 @@ int main(int argc, char *argv[]) * smaller than realtime and the syscall will timeout immediately. */ if (futex_get_abs_timeout(CLOCK_REALTIME, &to, timeout_ns)) - return RET_FAIL; + ksft_test_result_error("get_time error"); res = futex_lock_pi(&futex_pi, &to, 0, 0); - test_timeout(res, &ret, "futex_lock_pi realtime", ETIMEDOUT); + test_timeout(res, "futex_lock_pi realtime", ETIMEDOUT);
/* Test operations that don't support FUTEX_CLOCK_REALTIME */ res = futex_lock_pi(&futex_pi, NULL, 0, FUTEX_CLOCK_REALTIME); - test_timeout(res, &ret, "futex_lock_pi invalid timeout flag", ENOSYS); + test_timeout(res, "futex_lock_pi invalid timeout flag", ENOSYS); +} + +TEST(waitv) +{ + futex_t f1 = FUTEX_INITIALIZER; + struct timespec to; + int res; + struct futex_waitv waitv = { + .uaddr = (uintptr_t)&f1, + .val = f1, + .flags = FUTEX_32, + .__reserved = 0 + };
/* futex_waitv with CLOCK_MONOTONIC */ if (futex_get_abs_timeout(CLOCK_MONOTONIC, &to, timeout_ns)) - return RET_FAIL; + ksft_test_result_error("get_time error"); res = futex_waitv(&waitv, 1, 0, &to, CLOCK_MONOTONIC); - test_timeout(res, &ret, "futex_waitv monotonic", ETIMEDOUT); + test_timeout(res, "futex_waitv monotonic", ETIMEDOUT);
/* futex_waitv with CLOCK_REALTIME */ if (futex_get_abs_timeout(CLOCK_REALTIME, &to, timeout_ns)) - return RET_FAIL; + ksft_test_result_error("get_time error"); res = futex_waitv(&waitv, 1, 0, &to, CLOCK_REALTIME); - test_timeout(res, &ret, "futex_waitv realtime", ETIMEDOUT); - - ksft_print_cnts(); - return ret; + test_timeout(res, "futex_waitv realtime", ETIMEDOUT); } + +TEST_HARNESS_MAIN diff --git a/tools/testing/selftests/futex/functional/run.sh b/tools/testing/selftests/futex/functional/run.sh index 37f614e7d7fd3ce9741861e23df40f87139f572a..d42a8f4cf0a3d4361fd9d1196cb385a3ae38a04a 100755 --- a/tools/testing/selftests/futex/functional/run.sh +++ b/tools/testing/selftests/futex/functional/run.sh @@ -41,7 +41,7 @@ echo ./futex_requeue_pi_signal_restart
echo -./futex_wait_timeout $COLOR +./futex_wait_timeout
echo ./futex_wait_wouldblock $COLOR
To reduce the boilerplate code, refactor futex_wait_wouldblock test to use kselftest_harness header instead of futex's logging header.
Signed-off-by: André Almeida andrealmeid@igalia.com --- .../futex/functional/futex_wait_wouldblock.c | 75 +++++++--------------- tools/testing/selftests/futex/functional/run.sh | 2 +- 2 files changed, 23 insertions(+), 54 deletions(-)
diff --git a/tools/testing/selftests/futex/functional/futex_wait_wouldblock.c b/tools/testing/selftests/futex/functional/futex_wait_wouldblock.c index 2d8230da906429cd9f1f9021e8df23e12398429e..7bb4ff4dcd9d5fef289b1012975558f19e1490e0 100644 --- a/tools/testing/selftests/futex/functional/futex_wait_wouldblock.c +++ b/tools/testing/selftests/futex/functional/futex_wait_wouldblock.c @@ -21,72 +21,43 @@ #include <stdlib.h> #include <string.h> #include <time.h> + #include "futextest.h" #include "futex2test.h" -#include "logging.h" +#include "../../kselftest_harness.h"
-#define TEST_NAME "futex-wait-wouldblock" #define timeout_ns 100000
-void usage(char *prog) -{ - printf("Usage: %s\n", prog); - printf(" -c Use color\n"); - printf(" -h Display this help message\n"); - printf(" -v L Verbosity level: %d=QUIET %d=CRITICAL %d=INFO\n", - VQUIET, VCRITICAL, VINFO); -} - -int main(int argc, char *argv[]) +TEST(futex_wait_wouldblock) { struct timespec to = {.tv_sec = 0, .tv_nsec = timeout_ns}; futex_t f1 = FUTEX_INITIALIZER; - int res, ret = RET_PASS; - int c; - struct futex_waitv waitv = { - .uaddr = (uintptr_t)&f1, - .val = f1+1, - .flags = FUTEX_32, - .__reserved = 0 - }; - - while ((c = getopt(argc, argv, "cht:v:")) != -1) { - switch (c) { - case 'c': - log_color(1); - break; - case 'h': - usage(basename(argv[0])); - exit(0); - case 'v': - log_verbosity(atoi(optarg)); - break; - default: - usage(basename(argv[0])); - exit(1); - } - } - - ksft_print_header(); - ksft_set_plan(2); - ksft_print_msg("%s: Test the unexpected futex value in FUTEX_WAIT\n", - basename(argv[0])); + int res;
- info("Calling futex_wait on f1: %u @ %p with val=%u\n", f1, &f1, f1+1); + ksft_print_dbg_msg("Calling futex_wait on f1: %u @ %p with val=%u\n", f1, &f1, f1+1); res = futex_wait(&f1, f1+1, &to, FUTEX_PRIVATE_FLAG); if (!res || errno != EWOULDBLOCK) { ksft_test_result_fail("futex_wait returned: %d %s\n", res ? errno : res, res ? strerror(errno) : ""); - ret = RET_FAIL; } else { ksft_test_result_pass("futex_wait\n"); } +}
- if (clock_gettime(CLOCK_MONOTONIC, &to)) { - error("clock_gettime failed\n", errno); - return errno; - } +TEST(futex_waitv_wouldblock) +{ + struct timespec to = {.tv_sec = 0, .tv_nsec = timeout_ns}; + futex_t f1 = FUTEX_INITIALIZER; + int res; + struct futex_waitv waitv = { + .uaddr = (uintptr_t)&f1, + .val = f1+1, + .flags = FUTEX_32, + .__reserved = 0 + }; + if (clock_gettime(CLOCK_MONOTONIC, &to)) + ksft_exit_fail_msg("clock_gettime failed %d\n", errno);
to.tv_nsec += timeout_ns;
@@ -95,17 +66,15 @@ int main(int argc, char *argv[]) to.tv_nsec -= 1000000000; }
- info("Calling futex_waitv on f1: %u @ %p with val=%u\n", f1, &f1, f1+1); + ksft_print_dbg_msg("Calling futex_waitv on f1: %u @ %p with val=%u\n", f1, &f1, f1+1); res = futex_waitv(&waitv, 1, 0, &to, CLOCK_MONOTONIC); if (!res || errno != EWOULDBLOCK) { ksft_test_result_fail("futex_waitv returned: %d %s\n", res ? errno : res, res ? strerror(errno) : ""); - ret = RET_FAIL; } else { ksft_test_result_pass("futex_waitv\n"); } - - ksft_print_cnts(); - return ret; } + +TEST_HARNESS_MAIN diff --git a/tools/testing/selftests/futex/functional/run.sh b/tools/testing/selftests/futex/functional/run.sh index d42a8f4cf0a3d4361fd9d1196cb385a3ae38a04a..4a4fe9891f1ef8d69bb968a3a2be6c7dccd3575f 100755 --- a/tools/testing/selftests/futex/functional/run.sh +++ b/tools/testing/selftests/futex/functional/run.sh @@ -44,7 +44,7 @@ echo ./futex_wait_timeout
echo -./futex_wait_wouldblock $COLOR +./futex_wait_wouldblock
echo ./futex_wait_uninitialized_heap $COLOR
To reduce the boilerplate code, refactor futex_wait_unitialized_heap test to use kselftest_harness header instead of futex's logging header.
Signed-off-by: André Almeida andrealmeid@igalia.com --- .../functional/futex_wait_uninitialized_heap.c | 76 +++++----------------- tools/testing/selftests/futex/functional/run.sh | 2 +- 2 files changed, 19 insertions(+), 59 deletions(-)
diff --git a/tools/testing/selftests/futex/functional/futex_wait_uninitialized_heap.c b/tools/testing/selftests/futex/functional/futex_wait_uninitialized_heap.c index ed9cd07e31c1a980bb505bb97617282411b6085a..ce2301500d839ca7b2d527ab4e072b9f00d1146a 100644 --- a/tools/testing/selftests/futex/functional/futex_wait_uninitialized_heap.c +++ b/tools/testing/selftests/futex/functional/futex_wait_uninitialized_heap.c @@ -29,95 +29,55 @@ #include <linux/futex.h> #include <libgen.h>
-#include "logging.h" #include "futextest.h" +#include "../../kselftest_harness.h"
-#define TEST_NAME "futex-wait-uninitialized-heap" #define WAIT_US 5000000
static int child_blocked = 1; -static int child_ret; +static bool child_ret; void *buf;
-void usage(char *prog) -{ - printf("Usage: %s\n", prog); - printf(" -c Use color\n"); - printf(" -h Display this help message\n"); - printf(" -v L Verbosity level: %d=QUIET %d=CRITICAL %d=INFO\n", - VQUIET, VCRITICAL, VINFO); -} - void *wait_thread(void *arg) { int res;
- child_ret = RET_PASS; + child_ret = true; res = futex_wait(buf, 1, NULL, 0); child_blocked = 0;
if (res != 0 && errno != EWOULDBLOCK) { - error("futex failure\n", errno); - child_ret = RET_ERROR; + ksft_exit_fail_msg("futex failure\n"); + child_ret = false; } pthread_exit(NULL); }
-int main(int argc, char **argv) +TEST(futex_wait_uninitialized_heap) { - int c, ret = RET_PASS; long page_size; pthread_t thr; - - while ((c = getopt(argc, argv, "chv:")) != -1) { - switch (c) { - case 'c': - log_color(1); - break; - case 'h': - usage(basename(argv[0])); - exit(0); - case 'v': - log_verbosity(atoi(optarg)); - break; - default: - usage(basename(argv[0])); - exit(1); - } - } + int ret;
page_size = sysconf(_SC_PAGESIZE);
buf = mmap(NULL, page_size, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, 0, 0); - if (buf == (void *)-1) { - error("mmap\n", errno); - exit(1); - } - - ksft_print_header(); - ksft_set_plan(1); - ksft_print_msg("%s: Test the uninitialized futex value in FUTEX_WAIT\n", - basename(argv[0])); - + if (buf == (void *)-1) + ksft_exit_fail_msg("mmap\n");
ret = pthread_create(&thr, NULL, wait_thread, NULL); - if (ret) { - error("pthread_create\n", errno); - ret = RET_ERROR; - goto out; - } + if (ret) + ksft_exit_fail_msg("pthread_create\n");
- info("waiting %dus for child to return\n", WAIT_US); + ksft_print_dbg_msg("waiting %dus for child to return\n", WAIT_US); usleep(WAIT_US);
- ret = child_ret; - if (child_blocked) { - fail("child blocked in kernel\n"); - ret = RET_FAIL; - } + if (child_blocked) + ksft_test_result_fail("child blocked in kernel\n");
- out: - print_result(TEST_NAME, ret); - return ret; + if (!child_ret) + ksft_test_result_fail("child error\n"); } + +TEST_HARNESS_MAIN diff --git a/tools/testing/selftests/futex/functional/run.sh b/tools/testing/selftests/futex/functional/run.sh index 4a4fe9891f1ef8d69bb968a3a2be6c7dccd3575f..a93eb2a21d4aa23f874bf11ccc852838a4c3866f 100755 --- a/tools/testing/selftests/futex/functional/run.sh +++ b/tools/testing/selftests/futex/functional/run.sh @@ -47,7 +47,7 @@ echo ./futex_wait_wouldblock
echo -./futex_wait_uninitialized_heap $COLOR +./futex_wait_uninitialized_heap ./futex_wait_private_mapped_file $COLOR
echo
To reduce the boilerplate code, refactor futex_wait_private_mapped_file test to use kselftest_harness header instead of futex's logging header.
Signed-off-by: André Almeida andrealmeid@igalia.com --- .../functional/futex_wait_private_mapped_file.c | 83 ++++++---------------- tools/testing/selftests/futex/functional/run.sh | 2 +- 2 files changed, 21 insertions(+), 64 deletions(-)
diff --git a/tools/testing/selftests/futex/functional/futex_wait_private_mapped_file.c b/tools/testing/selftests/futex/functional/futex_wait_private_mapped_file.c index fb4148f23fa3722cb9c464e188b2747516534dbb..8952ebda14ab8a54d67be4cf36dd2913dbf3c403 100644 --- a/tools/testing/selftests/futex/functional/futex_wait_private_mapped_file.c +++ b/tools/testing/selftests/futex/functional/futex_wait_private_mapped_file.c @@ -27,10 +27,9 @@ #include <libgen.h> #include <signal.h>
-#include "logging.h" #include "futextest.h" +#include "../../kselftest_harness.h"
-#define TEST_NAME "futex-wait-private-mapped-file" #define PAGE_SZ 4096
char pad[PAGE_SZ] = {1}; @@ -40,86 +39,44 @@ char pad2[PAGE_SZ] = {1}; #define WAKE_WAIT_US 3000000 struct timespec wait_timeout = { .tv_sec = 5, .tv_nsec = 0};
-void usage(char *prog) -{ - printf("Usage: %s\n", prog); - printf(" -c Use color\n"); - printf(" -h Display this help message\n"); - printf(" -v L Verbosity level: %d=QUIET %d=CRITICAL %d=INFO\n", - VQUIET, VCRITICAL, VINFO); -} - void *thr_futex_wait(void *arg) { int ret;
- info("futex wait\n"); + ksft_print_dbg_msg("futex wait\n"); ret = futex_wait(&val, 1, &wait_timeout, 0); - if (ret && errno != EWOULDBLOCK && errno != ETIMEDOUT) { - error("futex error.\n", errno); - print_result(TEST_NAME, RET_ERROR); - exit(RET_ERROR); - } + if (ret && errno != EWOULDBLOCK && errno != ETIMEDOUT) + ksft_exit_fail_msg("futex error.\n");
if (ret && errno == ETIMEDOUT) - fail("waiter timedout\n"); + ksft_exit_fail_msg("waiter timedout\n");
- info("futex_wait: ret = %d, errno = %d\n", ret, errno); + ksft_print_dbg_msg("futex_wait: ret = %d, errno = %d\n", ret, errno);
return NULL; }
-int main(int argc, char **argv) +TEST(wait_private_mapped_file) { pthread_t thr; - int ret = RET_PASS; int res; - int c; - - while ((c = getopt(argc, argv, "chv:")) != -1) { - switch (c) { - case 'c': - log_color(1); - break; - case 'h': - usage(basename(argv[0])); - exit(0); - case 'v': - log_verbosity(atoi(optarg)); - break; - default: - usage(basename(argv[0])); - exit(1); - } - } - - ksft_print_header(); - ksft_set_plan(1); - ksft_print_msg( - "%s: Test the futex value of private file mappings in FUTEX_WAIT\n", - basename(argv[0])); - - ret = pthread_create(&thr, NULL, thr_futex_wait, NULL); - if (ret < 0) { - fprintf(stderr, "pthread_create error\n"); - ret = RET_ERROR; - goto out; - } - - info("wait a while\n"); + + res = pthread_create(&thr, NULL, thr_futex_wait, NULL); + if (res < 0) + ksft_exit_fail_msg("pthread_create error\n"); + + ksft_print_dbg_msg("wait a while\n"); usleep(WAKE_WAIT_US); val = 2; res = futex_wake(&val, 1, 0); - info("futex_wake %d\n", res); - if (res != 1) { - fail("FUTEX_WAKE didn't find the waiting thread.\n"); - ret = RET_FAIL; - } + ksft_print_dbg_msg("futex_wake %d\n", res); + if (res != 1) + ksft_exit_fail_msg("FUTEX_WAKE didn't find the waiting thread.\n");
- info("join\n"); + ksft_print_dbg_msg("join\n"); pthread_join(thr, NULL);
- out: - print_result(TEST_NAME, ret); - return ret; + ksft_test_result_pass("wait_private_mapped_file"); } + +TEST_HARNESS_MAIN diff --git a/tools/testing/selftests/futex/functional/run.sh b/tools/testing/selftests/futex/functional/run.sh index a93eb2a21d4aa23f874bf11ccc852838a4c3866f..2b3409d2513ea6b2c29efbcbdedfedd525f64151 100755 --- a/tools/testing/selftests/futex/functional/run.sh +++ b/tools/testing/selftests/futex/functional/run.sh @@ -48,7 +48,7 @@ echo
echo ./futex_wait_uninitialized_heap -./futex_wait_private_mapped_file $COLOR +./futex_wait_private_mapped_file
echo ./futex_wait $COLOR
To reduce the boilerplate code, refactor futex_wait test to use kselftest_harness header instead of futex's logging header.
Signed-off-by: André Almeida andrealmeid@igalia.com --- .../selftests/futex/functional/futex_wait.c | 103 ++++++++------------- tools/testing/selftests/futex/functional/run.sh | 2 +- 2 files changed, 39 insertions(+), 66 deletions(-)
diff --git a/tools/testing/selftests/futex/functional/futex_wait.c b/tools/testing/selftests/futex/functional/futex_wait.c index 685140d9b93d2f71f7f1d9f07c29bfd38adfd059..5a772a7e6831b13c3d63084c7759560825b93628 100644 --- a/tools/testing/selftests/futex/functional/futex_wait.c +++ b/tools/testing/selftests/futex/functional/futex_wait.c @@ -9,25 +9,16 @@ #include <sys/shm.h> #include <sys/mman.h> #include <fcntl.h> -#include "logging.h" + #include "futextest.h" +#include "../../kselftest_harness.h"
-#define TEST_NAME "futex-wait" #define timeout_ns 30000000 #define WAKE_WAIT_US 10000 #define SHM_PATH "futex_shm_file"
void *futex;
-void usage(char *prog) -{ - printf("Usage: %s\n", prog); - printf(" -c Use color\n"); - printf(" -h Display this help message\n"); - printf(" -v L Verbosity level: %d=QUIET %d=CRITICAL %d=INFO\n", - VQUIET, VCRITICAL, VINFO); -} - static void *waiterfn(void *arg) { struct timespec to; @@ -45,53 +36,37 @@ static void *waiterfn(void *arg) return NULL; }
-int main(int argc, char *argv[]) +TEST(private_futex) { - int res, ret = RET_PASS, fd, c, shm_id; - u_int32_t f_private = 0, *shared_data; + int res; + u_int32_t f_private = 0; unsigned int flags = FUTEX_PRIVATE_FLAG; pthread_t waiter; - void *shm;
futex = &f_private;
- while ((c = getopt(argc, argv, "cht:v:")) != -1) { - switch (c) { - case 'c': - log_color(1); - break; - case 'h': - usage(basename(argv[0])); - exit(0); - case 'v': - log_verbosity(atoi(optarg)); - break; - default: - usage(basename(argv[0])); - exit(1); - } - } - - ksft_print_header(); - ksft_set_plan(3); - ksft_print_msg("%s: Test futex_wait\n", basename(argv[0])); - /* Testing a private futex */ - info("Calling private futex_wait on futex: %p\n", futex); + ksft_print_dbg_msg("Calling private futex_wait on futex: %p\n", futex); if (pthread_create(&waiter, NULL, waiterfn, (void *) &flags)) - error("pthread_create failed\n", errno); + ksft_exit_fail_msg("pthread_create failed\n");
usleep(WAKE_WAIT_US);
- info("Calling private futex_wake on futex: %p\n", futex); + ksft_print_dbg_msg("Calling private futex_wake on futex: %p\n", futex); res = futex_wake(futex, 1, FUTEX_PRIVATE_FLAG); if (res != 1) { ksft_test_result_fail("futex_wake private returned: %d %s\n", errno, strerror(errno)); - ret = RET_FAIL; } else { ksft_test_result_pass("futex_wake private succeeds\n"); } +} + +TEST(anon_page) +{ + u_int32_t *shared_data; + pthread_t waiter; + int res, shm_id;
/* Testing an anon page shared memory */ shm_id = shmget(IPC_PRIVATE, 4096, IPC_CREAT | 0666); @@ -105,67 +80,65 @@ int main(int argc, char *argv[]) *shared_data = 0; futex = shared_data;
- info("Calling shared (page anon) futex_wait on futex: %p\n", futex); + ksft_print_dbg_msg("Calling shared (page anon) futex_wait on futex: %p\n", futex); if (pthread_create(&waiter, NULL, waiterfn, NULL)) - error("pthread_create failed\n", errno); + ksft_exit_fail_msg("pthread_create failed\n");
usleep(WAKE_WAIT_US);
- info("Calling shared (page anon) futex_wake on futex: %p\n", futex); + ksft_print_dbg_msg("Calling shared (page anon) futex_wake on futex: %p\n", futex); res = futex_wake(futex, 1, 0); if (res != 1) { ksft_test_result_fail("futex_wake shared (page anon) returned: %d %s\n", errno, strerror(errno)); - ret = RET_FAIL; } else { ksft_test_result_pass("futex_wake shared (page anon) succeeds\n"); }
+ shmdt(shared_data); +} + +TEST(file_backed) +{ + u_int32_t f_private = 0; + pthread_t waiter; + int res, fd; + void *shm;
/* Testing a file backed shared memory */ fd = open(SHM_PATH, O_RDWR | O_CREAT, S_IRUSR | S_IWUSR); - if (fd < 0) { - perror("open"); - exit(1); - } + if (fd < 0) + ksft_exit_fail_msg("open");
- if (ftruncate(fd, sizeof(f_private))) { - perror("ftruncate"); - exit(1); - } + if (ftruncate(fd, sizeof(f_private))) + ksft_exit_fail_msg("ftruncate");
shm = mmap(NULL, sizeof(f_private), PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); - if (shm == MAP_FAILED) { - perror("mmap"); - exit(1); - } + if (shm == MAP_FAILED) + ksft_exit_fail_msg("mmap");
memcpy(shm, &f_private, sizeof(f_private));
futex = shm;
- info("Calling shared (file backed) futex_wait on futex: %p\n", futex); + ksft_print_dbg_msg("Calling shared (file backed) futex_wait on futex: %p\n", futex); if (pthread_create(&waiter, NULL, waiterfn, NULL)) - error("pthread_create failed\n", errno); + ksft_exit_fail_msg("pthread_create failed\n");
usleep(WAKE_WAIT_US);
- info("Calling shared (file backed) futex_wake on futex: %p\n", futex); + ksft_print_dbg_msg("Calling shared (file backed) futex_wake on futex: %p\n", futex); res = futex_wake(shm, 1, 0); if (res != 1) { ksft_test_result_fail("futex_wake shared (file backed) returned: %d %s\n", errno, strerror(errno)); - ret = RET_FAIL; } else { ksft_test_result_pass("futex_wake shared (file backed) succeeds\n"); }
- /* Freeing resources */ - shmdt(shared_data); munmap(shm, sizeof(f_private)); remove(SHM_PATH); close(fd); - - ksft_print_cnts(); - return ret; } + +TEST_HARNESS_MAIN diff --git a/tools/testing/selftests/futex/functional/run.sh b/tools/testing/selftests/futex/functional/run.sh index 2b3409d2513ea6b2c29efbcbdedfedd525f64151..b461a0a075a2ae526d37a1fcd09e196e48c2d4ff 100755 --- a/tools/testing/selftests/futex/functional/run.sh +++ b/tools/testing/selftests/futex/functional/run.sh @@ -51,7 +51,7 @@ echo ./futex_wait_private_mapped_file
echo -./futex_wait $COLOR +./futex_wait
echo ./futex_requeue $COLOR
To reduce the boilerplate code, refactor futex_requeue test to use kselftest_harness header instead of futex's logging header.
Signed-off-by: André Almeida andrealmeid@igalia.com --- .../selftests/futex/functional/futex_requeue.c | 76 +++++++--------------- tools/testing/selftests/futex/functional/run.sh | 2 +- 2 files changed, 24 insertions(+), 54 deletions(-)
diff --git a/tools/testing/selftests/futex/functional/futex_requeue.c b/tools/testing/selftests/futex/functional/futex_requeue.c index 51485be6eb2f1be6d0e30bc26c116515a0e5e7cc..69e2555b60399174a16ee1316b0b7d2e10419989 100644 --- a/tools/testing/selftests/futex/functional/futex_requeue.c +++ b/tools/testing/selftests/futex/functional/futex_requeue.c @@ -7,24 +7,15 @@
#include <pthread.h> #include <limits.h> -#include "logging.h" + #include "futextest.h" +#include "../../kselftest_harness.h"
-#define TEST_NAME "futex-requeue" #define timeout_ns 30000000 #define WAKE_WAIT_US 10000
volatile futex_t *f1;
-void usage(char *prog) -{ - printf("Usage: %s\n", prog); - printf(" -c Use color\n"); - printf(" -h Display this help message\n"); - printf(" -v L Verbosity level: %d=QUIET %d=CRITICAL %d=INFO\n", - VQUIET, VCRITICAL, VINFO); -} - void *waiterfn(void *arg) { struct timespec to; @@ -38,67 +29,49 @@ void *waiterfn(void *arg) return NULL; }
-int main(int argc, char *argv[]) +TEST(requeue_single) { - pthread_t waiter[10]; - int res, ret = RET_PASS; - int c, i; volatile futex_t _f1 = 0; volatile futex_t f2 = 0; + pthread_t waiter[10]; + int res;
f1 = &_f1;
- while ((c = getopt(argc, argv, "cht:v:")) != -1) { - switch (c) { - case 'c': - log_color(1); - break; - case 'h': - usage(basename(argv[0])); - exit(0); - case 'v': - log_verbosity(atoi(optarg)); - break; - default: - usage(basename(argv[0])); - exit(1); - } - } - - ksft_print_header(); - ksft_set_plan(2); - ksft_print_msg("%s: Test futex_requeue\n", - basename(argv[0])); - /* * Requeue a waiter from f1 to f2, and wake f2. */ if (pthread_create(&waiter[0], NULL, waiterfn, NULL)) - error("pthread_create failed\n", errno); + ksft_exit_fail_msg("pthread_create failed\n");
usleep(WAKE_WAIT_US);
- info("Requeuing 1 futex from f1 to f2\n"); + ksft_print_dbg_msg("Requeuing 1 futex from f1 to f2\n"); res = futex_cmp_requeue(f1, 0, &f2, 0, 1, 0); - if (res != 1) { + if (res != 1) ksft_test_result_fail("futex_requeue simple returned: %d %s\n", res ? errno : res, res ? strerror(errno) : ""); - ret = RET_FAIL; - }
- - info("Waking 1 futex at f2\n"); + ksft_print_dbg_msg("Waking 1 futex at f2\n"); res = futex_wake(&f2, 1, 0); if (res != 1) { ksft_test_result_fail("futex_requeue simple returned: %d %s\n", res ? errno : res, res ? strerror(errno) : ""); - ret = RET_FAIL; } else { ksft_test_result_pass("futex_requeue simple succeeds\n"); } +} + +TEST(requeue_multiple) +{ + volatile futex_t _f1 = 0; + volatile futex_t f2 = 0; + pthread_t waiter[10]; + int res, i;
+ f1 = &_f1;
/* * Create 10 waiters at f1. At futex_requeue, wake 3 and requeue 7. @@ -106,31 +79,28 @@ int main(int argc, char *argv[]) */ for (i = 0; i < 10; i++) { if (pthread_create(&waiter[i], NULL, waiterfn, NULL)) - error("pthread_create failed\n", errno); + ksft_exit_fail_msg("pthread_create failed\n"); }
usleep(WAKE_WAIT_US);
- info("Waking 3 futexes at f1 and requeuing 7 futexes from f1 to f2\n"); + ksft_print_dbg_msg("Waking 3 futexes at f1 and requeuing 7 futexes from f1 to f2\n"); res = futex_cmp_requeue(f1, 0, &f2, 3, 7, 0); if (res != 10) { ksft_test_result_fail("futex_requeue many returned: %d %s\n", res ? errno : res, res ? strerror(errno) : ""); - ret = RET_FAIL; }
- info("Waking INT_MAX futexes at f2\n"); + ksft_print_dbg_msg("Waking INT_MAX futexes at f2\n"); res = futex_wake(&f2, INT_MAX, 0); if (res != 7) { ksft_test_result_fail("futex_requeue many returned: %d %s\n", res ? errno : res, res ? strerror(errno) : ""); - ret = RET_FAIL; } else { ksft_test_result_pass("futex_requeue many succeeds\n"); } - - ksft_print_cnts(); - return ret; } + +TEST_HARNESS_MAIN diff --git a/tools/testing/selftests/futex/functional/run.sh b/tools/testing/selftests/futex/functional/run.sh index b461a0a075a2ae526d37a1fcd09e196e48c2d4ff..af32695cfaded4f834c7c07c24908b8a3e32fe28 100755 --- a/tools/testing/selftests/futex/functional/run.sh +++ b/tools/testing/selftests/futex/functional/run.sh @@ -54,7 +54,7 @@ echo ./futex_wait
echo -./futex_requeue $COLOR +./futex_requeue
echo ./futex_waitv $COLOR
To reduce the boilerplate code, refactor futex_waitv test to use kselftest_harness header instead of futex's logging header.
Signed-off-by: André Almeida andrealmeid@igalia.com --- .../selftests/futex/functional/futex_waitv.c | 98 ++++++++++------------ tools/testing/selftests/futex/functional/run.sh | 2 +- 2 files changed, 44 insertions(+), 56 deletions(-)
diff --git a/tools/testing/selftests/futex/functional/futex_waitv.c b/tools/testing/selftests/futex/functional/futex_waitv.c index a94337f677e181544992efd53891ccca02787adb..8ceaa372b2524fe243400c50382a142a30e61159 100644 --- a/tools/testing/selftests/futex/functional/futex_waitv.c +++ b/tools/testing/selftests/futex/functional/futex_waitv.c @@ -15,25 +15,16 @@ #include <pthread.h> #include <stdint.h> #include <sys/shm.h> + #include "futextest.h" #include "futex2test.h" -#include "logging.h" +#include "../../kselftest_harness.h"
-#define TEST_NAME "futex-wait" #define WAKE_WAIT_US 10000 #define NR_FUTEXES 30 static struct futex_waitv waitv[NR_FUTEXES]; u_int32_t futexes[NR_FUTEXES] = {0};
-void usage(char *prog) -{ - printf("Usage: %s\n", prog); - printf(" -c Use color\n"); - printf(" -h Display this help message\n"); - printf(" -v L Verbosity level: %d=QUIET %d=CRITICAL %d=INFO\n", - VQUIET, VCRITICAL, VINFO); -} - void *waiterfn(void *arg) { struct timespec to; @@ -41,7 +32,7 @@ void *waiterfn(void *arg)
/* setting absolute timeout for futex2 */ if (clock_gettime(CLOCK_MONOTONIC, &to)) - error("gettime64 failed\n", errno); + ksft_exit_fail_msg("gettime64 failed\n");
to.tv_sec++;
@@ -57,34 +48,10 @@ void *waiterfn(void *arg) return NULL; }
-int main(int argc, char *argv[]) +TEST(private_waitv) { pthread_t waiter; - int res, ret = RET_PASS; - struct timespec to; - int c, i; - - while ((c = getopt(argc, argv, "cht:v:")) != -1) { - switch (c) { - case 'c': - log_color(1); - break; - case 'h': - usage(basename(argv[0])); - exit(0); - case 'v': - log_verbosity(atoi(optarg)); - break; - default: - usage(basename(argv[0])); - exit(1); - } - } - - ksft_print_header(); - ksft_set_plan(7); - ksft_print_msg("%s: Test FUTEX_WAITV\n", - basename(argv[0])); + int res, i;
for (i = 0; i < NR_FUTEXES; i++) { waitv[i].uaddr = (uintptr_t)&futexes[i]; @@ -95,7 +62,7 @@ int main(int argc, char *argv[])
/* Private waitv */ if (pthread_create(&waiter, NULL, waiterfn, NULL)) - error("pthread_create failed\n", errno); + ksft_exit_fail_msg("pthread_create failed\n");
usleep(WAKE_WAIT_US);
@@ -104,10 +71,15 @@ int main(int argc, char *argv[]) ksft_test_result_fail("futex_wake private returned: %d %s\n", res ? errno : res, res ? strerror(errno) : ""); - ret = RET_FAIL; } else { ksft_test_result_pass("futex_waitv private\n"); } +} + +TEST(shared_waitv) +{ + pthread_t waiter; + int res, i;
/* Shared waitv */ for (i = 0; i < NR_FUTEXES; i++) { @@ -128,7 +100,7 @@ int main(int argc, char *argv[]) }
if (pthread_create(&waiter, NULL, waiterfn, NULL)) - error("pthread_create failed\n", errno); + ksft_exit_fail_msg("pthread_create failed\n");
usleep(WAKE_WAIT_US);
@@ -137,19 +109,24 @@ int main(int argc, char *argv[]) ksft_test_result_fail("futex_wake shared returned: %d %s\n", res ? errno : res, res ? strerror(errno) : ""); - ret = RET_FAIL; } else { ksft_test_result_pass("futex_waitv shared\n"); }
for (i = 0; i < NR_FUTEXES; i++) shmdt(u64_to_ptr(waitv[i].uaddr)); +} + +TEST(invalid_flag) +{ + struct timespec to; + int res;
/* Testing a waiter without FUTEX_32 flag */ waitv[0].flags = FUTEX_PRIVATE_FLAG;
if (clock_gettime(CLOCK_MONOTONIC, &to)) - error("gettime64 failed\n", errno); + ksft_exit_fail_msg("gettime64 failed\n");
to.tv_sec++;
@@ -158,17 +135,21 @@ int main(int argc, char *argv[]) ksft_test_result_fail("futex_waitv private returned: %d %s\n", res ? errno : res, res ? strerror(errno) : ""); - ret = RET_FAIL; } else { ksft_test_result_pass("futex_waitv without FUTEX_32\n"); } +}
+TEST(unaligned_address) +{ + struct timespec to; + int res; /* Testing a waiter with an unaligned address */ waitv[0].flags = FUTEX_PRIVATE_FLAG | FUTEX_32; waitv[0].uaddr = 1;
if (clock_gettime(CLOCK_MONOTONIC, &to)) - error("gettime64 failed\n", errno); + ksft_exit_fail_msg("gettime64 failed\n");
to.tv_sec++;
@@ -177,16 +158,21 @@ int main(int argc, char *argv[]) ksft_test_result_fail("futex_wake private returned: %d %s\n", res ? errno : res, res ? strerror(errno) : ""); - ret = RET_FAIL; } else { ksft_test_result_pass("futex_waitv with an unaligned address\n"); } +} + +TEST(null_address) +{ + struct timespec to; + int res;
/* Testing a NULL address for waiters.uaddr */ waitv[0].uaddr = 0x00000000;
if (clock_gettime(CLOCK_MONOTONIC, &to)) - error("gettime64 failed\n", errno); + ksft_exit_fail_msg("gettime64 failed\n");
to.tv_sec++;
@@ -195,14 +181,13 @@ int main(int argc, char *argv[]) ksft_test_result_fail("futex_waitv private returned: %d %s\n", res ? errno : res, res ? strerror(errno) : ""); - ret = RET_FAIL; } else { ksft_test_result_pass("futex_waitv NULL address in waitv.uaddr\n"); }
/* Testing a NULL address for *waiters */ if (clock_gettime(CLOCK_MONOTONIC, &to)) - error("gettime64 failed\n", errno); + ksft_exit_fail_msg("gettime64 failed\n");
to.tv_sec++;
@@ -211,14 +196,19 @@ int main(int argc, char *argv[]) ksft_test_result_fail("futex_waitv private returned: %d %s\n", res ? errno : res, res ? strerror(errno) : ""); - ret = RET_FAIL; } else { ksft_test_result_pass("futex_waitv NULL address in *waiters\n"); } +} + +TEST(invalid_clockid) +{ + struct timespec to; + int res;
/* Testing an invalid clockid */ if (clock_gettime(CLOCK_MONOTONIC, &to)) - error("gettime64 failed\n", errno); + ksft_exit_fail_msg("gettime64 failed\n");
to.tv_sec++;
@@ -227,11 +217,9 @@ int main(int argc, char *argv[]) ksft_test_result_fail("futex_waitv private returned: %d %s\n", res ? errno : res, res ? strerror(errno) : ""); - ret = RET_FAIL; } else { ksft_test_result_pass("futex_waitv invalid clockid\n"); } - - ksft_print_cnts(); - return ret; } + +TEST_HARNESS_MAIN diff --git a/tools/testing/selftests/futex/functional/run.sh b/tools/testing/selftests/futex/functional/run.sh index af32695cfaded4f834c7c07c24908b8a3e32fe28..6086b5652687af3cd2d4e4bd56159149d5bb5fea 100755 --- a/tools/testing/selftests/futex/functional/run.sh +++ b/tools/testing/selftests/futex/functional/run.sh @@ -57,7 +57,7 @@ echo ./futex_requeue
echo -./futex_waitv $COLOR +./futex_waitv
echo ./futex_priv_hash $COLOR
To reduce the boilerplate code, refactor futex_priv_hash test to use kselftest_harness header instead of futex's logging header.
Use the fixture feature to run the same test with different parameters (with global hash enabled and disabled).
Signed-off-by: André Almeida andrealmeid@igalia.com --- .../selftests/futex/functional/futex_priv_hash.c | 79 ++++++++++------------ tools/testing/selftests/futex/functional/run.sh | 3 +- 2 files changed, 35 insertions(+), 47 deletions(-)
diff --git a/tools/testing/selftests/futex/functional/futex_priv_hash.c b/tools/testing/selftests/futex/functional/futex_priv_hash.c index 24a92dc94eb86cc0e03ded5d6a4a0a96b0dc8a36..8ad7135cb59adc16bd2ff9ea57796a3a5c282ae5 100644 --- a/tools/testing/selftests/futex/functional/futex_priv_hash.c +++ b/tools/testing/selftests/futex/functional/futex_priv_hash.c @@ -14,7 +14,7 @@ #include <linux/prctl.h> #include <sys/prctl.h>
-#include "logging.h" +#include "../../kselftest_harness.h"
#define MAX_THREADS 64
@@ -111,50 +111,42 @@ static void join_max_threads(void) } }
-static void usage(char *prog) +static const char *test_msg_auto_create = "Automatic hash bucket init on thread creation.\n"; +static const char *test_msg_auto_inc = "Automatic increase with more than 16 CPUs\n"; + +FIXTURE(global_hash) +{ +}; + +FIXTURE_VARIANT(global_hash) +{ + bool use_global_hash; +}; + +FIXTURE_VARIANT_ADD(global_hash, enabled) +{ + .use_global_hash = true, +}; + +FIXTURE_VARIANT_ADD(global_hash, disabled) +{ + .use_global_hash = false, +}; + +FIXTURE_SETUP(global_hash) { - printf("Usage: %s\n", prog); - printf(" -c Use color\n"); - printf(" -g Test global hash instead intead local immutable \n"); - printf(" -h Display this help message\n"); - printf(" -v L Verbosity level: %d=QUIET %d=CRITICAL %d=INFO\n", - VQUIET, VCRITICAL, VINFO); }
-static const char *test_msg_auto_create = "Automatic hash bucket init on thread creation.\n"; -static const char *test_msg_auto_inc = "Automatic increase with more than 16 CPUs\n"; +FIXTURE_TEARDOWN(global_hash) +{ +}
-int main(int argc, char *argv[]) +TEST_F(global_hash, priv_hash) { int futex_slots1, futex_slotsn, online_cpus; pthread_mutexattr_t mutex_attr_pi; - int use_global_hash = 0; + int use_global_hash = variant->use_global_hash; int ret; - int c; - - while ((c = getopt(argc, argv, "cghv:")) != -1) { - switch (c) { - case 'c': - log_color(1); - break; - case 'g': - use_global_hash = 1; - break; - case 'h': - usage(basename(argv[0])); - exit(0); - break; - case 'v': - log_verbosity(atoi(optarg)); - break; - default: - usage(basename(argv[0])); - exit(1); - } - } - - ksft_print_header(); - ksft_set_plan(22);
ret = pthread_mutexattr_init(&mutex_attr_pi); ret |= pthread_mutexattr_setprotocol(&mutex_attr_pi, PTHREAD_PRIO_INHERIT); @@ -259,7 +251,7 @@ int main(int argc, char *argv[]) ksft_test_result(ret == 0, "Immutable resize to 4\n"); } if (ret != 0) - goto out; + return;
futex_hash_slots_set_must_fail(4, 0); futex_hash_slots_set_must_fail(4, FH_FLAG_IMMUTABLE); @@ -269,10 +261,9 @@ int main(int argc, char *argv[]) futex_hash_slots_set_must_fail(6, FH_FLAG_IMMUTABLE);
ret = pthread_barrier_init(&barrier_main, NULL, MAX_THREADS); - if (ret != 0) { + if (ret != 0) ksft_exit_fail_msg("pthread_barrier_init failed: %m\n"); - return 1; - } + create_max_threads(thread_lock_fn); join_max_threads();
@@ -285,8 +276,6 @@ int main(int argc, char *argv[])
ret = futex_hash_immutable_get(); ksft_test_result(ret == 1, "Hash reports to be immutable\n"); - -out: - ksft_finished(); - return 0; } + +TEST_HARNESS_MAIN diff --git a/tools/testing/selftests/futex/functional/run.sh b/tools/testing/selftests/futex/functional/run.sh index 6086b5652687af3cd2d4e4bd56159149d5bb5fea..f725531f06c4a88e6d3ebbabb628a5d5009eaa3b 100755 --- a/tools/testing/selftests/futex/functional/run.sh +++ b/tools/testing/selftests/futex/functional/run.sh @@ -60,8 +60,7 @@ echo ./futex_waitv
echo -./futex_priv_hash $COLOR -./futex_priv_hash -g $COLOR +./futex_priv_hash
echo ./futex_numa_mpol $COLOR
To reduce the boilerplate code, refactor futex_numa_mpol test to use kselftest_harness header instead of futex's logging header.
Using kselftest_harness produces a side effect of having two adjacents buffers, because test_harness_run() calls mmap() before this test calling mmap(). This makes the "Memory out of range" subtest fail, because the test address falls inside the first mmap() region, thus being a valid address. Create a "buffer zone" with mmap(PROT_NONE) to make sure there's invalid memory between the two mmaps and munmap() them by the end of the test.
Signed-off-by: André Almeida andrealmeid@igalia.com --- .../selftests/futex/functional/futex_numa_mpol.c | 57 ++++++++-------------- tools/testing/selftests/futex/functional/run.sh | 15 +----- 2 files changed, 21 insertions(+), 51 deletions(-)
diff --git a/tools/testing/selftests/futex/functional/futex_numa_mpol.c b/tools/testing/selftests/futex/functional/futex_numa_mpol.c index a9ecfb2d3932add7e560d885dc2088313fbb63bb..8d8d117b095f267af08fddcf13337f4674c44863 100644 --- a/tools/testing/selftests/futex/functional/futex_numa_mpol.c +++ b/tools/testing/selftests/futex/functional/futex_numa_mpol.c @@ -16,9 +16,9 @@ #include <linux/futex.h> #include <sys/mman.h>
-#include "logging.h" #include "futextest.h" #include "futex2test.h" +#include "../../kselftest_harness.h"
#define MAX_THREADS 64
@@ -130,44 +130,25 @@ static void test_futex_mpol(void *futex_ptr, int must_fail) __test_futex(futex_ptr, must_fail, FUTEX2_SIZE_U32 | FUTEX_PRIVATE_FLAG | FUTEX2_NUMA | FUTEX2_MPOL); }
-static void usage(char *prog) -{ - printf("Usage: %s\n", prog); - printf(" -c Use color\n"); - printf(" -h Display this help message\n"); - printf(" -v L Verbosity level: %d=QUIET %d=CRITICAL %d=INFO\n", - VQUIET, VCRITICAL, VINFO); -} - -int main(int argc, char *argv[]) +TEST(futex_numa_mpol) { struct futex32_numa *futex_numa; int mem_size, i; - void *futex_ptr; - int c; - - while ((c = getopt(argc, argv, "chv:")) != -1) { - switch (c) { - case 'c': - log_color(1); - break; - case 'h': - usage(basename(argv[0])); - exit(0); - break; - case 'v': - log_verbosity(atoi(optarg)); - break; - default: - usage(basename(argv[0])); - exit(1); - } - } - - ksft_print_header(); - ksft_set_plan(1); + void *futex_ptr, *buffer_zone;
mem_size = sysconf(_SC_PAGE_SIZE); + + /* + * test_harness_run() calls mmap(..., MAP_SHARED, ...), which can create + * a valid access memory region just bellow the mmap() issue here. Then, + * the test for "Memory out of range" will fail because it will succeed + * accessing the memory address after the range. To avoid this we create + * a "Buffer zone" with PROT_NONE between the two mmap's. + */ + buffer_zone = mmap(NULL, mem_size, PROT_NONE, MAP_PRIVATE | MAP_ANONYMOUS, 0, 0); + if (buffer_zone == MAP_FAILED) + ksft_exit_fail_msg("mmap() for %d bytes failed\n", mem_size); + futex_ptr = mmap(NULL, mem_size, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, 0, 0); if (futex_ptr == MAP_FAILED) ksft_exit_fail_msg("mmap() for %d bytes failed\n", mem_size); @@ -229,7 +210,9 @@ int main(int argc, char *argv[]) } } } - ksft_test_result_pass("NUMA MPOL tests passed\n"); - ksft_finished(); - return 0; + + munmap(buffer_zone, mem_size); + munmap(futex_ptr, mem_size); } + +TEST_HARNESS_MAIN diff --git a/tools/testing/selftests/futex/functional/run.sh b/tools/testing/selftests/futex/functional/run.sh index f725531f06c4a88e6d3ebbabb628a5d5009eaa3b..e88545c06d57a7b202e9a65a66d129996b4ebd27 100755 --- a/tools/testing/selftests/futex/functional/run.sh +++ b/tools/testing/selftests/futex/functional/run.sh @@ -18,19 +18,6 @@ # ###############################################################################
-# Test for a color capable console -if [ -z "$USE_COLOR" ]; then - tput setf 7 || tput setaf 7 - if [ $? -eq 0 ]; then - USE_COLOR=1 - tput sgr0 - fi -fi -if [ "$USE_COLOR" -eq 1 ]; then - COLOR="-c" -fi - - echo ./futex_requeue_pi
@@ -63,4 +50,4 @@ echo ./futex_priv_hash
echo -./futex_numa_mpol $COLOR +./futex_numa_mpol
futex_numa doesn't really use logging.h helpers, it's only need two includes from this file. So drop it and include the two missing includes.
Signed-off-by: André Almeida andrealmeid@igalia.com --- tools/testing/selftests/futex/functional/futex_numa.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/futex/functional/futex_numa.c b/tools/testing/selftests/futex/functional/futex_numa.c index f29e4d627e7942bd0bc8f031f9c0ad59c157c536..e0a33510ccb60c799275cdc8b41254c8161f8090 100644 --- a/tools/testing/selftests/futex/functional/futex_numa.c +++ b/tools/testing/selftests/futex/functional/futex_numa.c @@ -5,9 +5,10 @@ #include <sys/mman.h> #include <fcntl.h> #include <stdbool.h> +#include <stdio.h> +#include <stdlib.h> #include <time.h> #include <assert.h> -#include "logging.h" #include "futextest.h" #include "futex2test.h"
Every futex selftest uses the kselftest_harness.h helper and don't need the logging.h file. Delete it.
Signed-off-by: André Almeida andrealmeid@igalia.com --- tools/testing/selftests/futex/functional/Makefile | 3 +- tools/testing/selftests/futex/include/logging.h | 148 ---------------------- 2 files changed, 1 insertion(+), 150 deletions(-)
diff --git a/tools/testing/selftests/futex/functional/Makefile b/tools/testing/selftests/futex/functional/Makefile index 8cfb87f7f7c5059c82f1e6290c076d3f13f5ea41..6bd6f9b972f1bf113b84f72386c21e2fb43436d5 100644 --- a/tools/testing/selftests/futex/functional/Makefile +++ b/tools/testing/selftests/futex/functional/Makefile @@ -5,8 +5,7 @@ LDLIBS := -lpthread -lrt -lnuma
LOCAL_HDRS := \ ../include/futextest.h \ - ../include/atomic.h \ - ../include/logging.h + ../include/atomic.h TEST_GEN_PROGS := \ futex_wait_timeout \ futex_wait_wouldblock \ diff --git a/tools/testing/selftests/futex/include/logging.h b/tools/testing/selftests/futex/include/logging.h deleted file mode 100644 index 874c69ce5cce9efa3a9d6de246f5972a75437dbf..0000000000000000000000000000000000000000 --- a/tools/testing/selftests/futex/include/logging.h +++ /dev/null @@ -1,148 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/****************************************************************************** - * - * Copyright © International Business Machines Corp., 2009 - * - * DESCRIPTION - * Glibc independent futex library for testing kernel functionality. - * - * AUTHOR - * Darren Hart dvhart@linux.intel.com - * - * HISTORY - * 2009-Nov-6: Initial version by Darren Hart dvhart@linux.intel.com - * - *****************************************************************************/ - -#ifndef _LOGGING_H -#define _LOGGING_H - -#include <stdio.h> -#include <string.h> -#include <unistd.h> -#include <linux/futex.h> -#include "kselftest.h" - -/* - * Define PASS, ERROR, and FAIL strings with and without color escape - * sequences, default to no color. - */ -#define ESC 0x1B, '[' -#define BRIGHT '1' -#define GREEN '3', '2' -#define YELLOW '3', '3' -#define RED '3', '1' -#define ESCEND 'm' -#define BRIGHT_GREEN ESC, BRIGHT, ';', GREEN, ESCEND -#define BRIGHT_YELLOW ESC, BRIGHT, ';', YELLOW, ESCEND -#define BRIGHT_RED ESC, BRIGHT, ';', RED, ESCEND -#define RESET_COLOR ESC, '0', 'm' -static const char PASS_COLOR[] = {BRIGHT_GREEN, ' ', 'P', 'A', 'S', 'S', - RESET_COLOR, 0}; -static const char ERROR_COLOR[] = {BRIGHT_YELLOW, 'E', 'R', 'R', 'O', 'R', - RESET_COLOR, 0}; -static const char FAIL_COLOR[] = {BRIGHT_RED, ' ', 'F', 'A', 'I', 'L', - RESET_COLOR, 0}; -static const char INFO_NORMAL[] = " INFO"; -static const char PASS_NORMAL[] = " PASS"; -static const char ERROR_NORMAL[] = "ERROR"; -static const char FAIL_NORMAL[] = " FAIL"; -const char *INFO = INFO_NORMAL; -const char *PASS = PASS_NORMAL; -const char *ERROR = ERROR_NORMAL; -const char *FAIL = FAIL_NORMAL; - -/* Verbosity setting for INFO messages */ -#define VQUIET 0 -#define VCRITICAL 1 -#define VINFO 2 -#define VMAX VINFO -int _verbose = VCRITICAL; - -/* Functional test return codes */ -#define RET_PASS 0 -#define RET_ERROR -1 -#define RET_FAIL -2 - -/** - * log_color() - Use colored output for PASS, ERROR, and FAIL strings - * @use_color: use color (1) or not (0) - */ -void log_color(int use_color) -{ - if (use_color) { - PASS = PASS_COLOR; - ERROR = ERROR_COLOR; - FAIL = FAIL_COLOR; - } else { - PASS = PASS_NORMAL; - ERROR = ERROR_NORMAL; - FAIL = FAIL_NORMAL; - } -} - -/** - * log_verbosity() - Set verbosity of test output - * @verbose: Enable (1) verbose output or not (0) - * - * Currently setting verbose=1 will enable INFO messages and 0 will disable - * them. FAIL and ERROR messages are always displayed. - */ -void log_verbosity(int level) -{ - if (level > VMAX) - level = VMAX; - else if (level < 0) - level = 0; - _verbose = level; -} - -/** - * print_result() - Print standard PASS | ERROR | FAIL results - * @ret: the return value to be considered: 0 | RET_ERROR | RET_FAIL - * - * print_result() is primarily intended for functional tests. - */ -void print_result(const char *test_name, int ret) -{ - switch (ret) { - case RET_PASS: - ksft_test_result_pass("%s\n", test_name); - ksft_print_cnts(); - return; - case RET_ERROR: - ksft_test_result_error("%s\n", test_name); - ksft_print_cnts(); - return; - case RET_FAIL: - ksft_test_result_fail("%s\n", test_name); - ksft_print_cnts(); - return; - } -} - -/* log level macros */ -#define info(message, vargs...) \ -do { \ - if (_verbose >= VINFO) \ - fprintf(stderr, "\t%s: "message, INFO, ##vargs); \ -} while (0) - -#define error(message, err, args...) \ -do { \ - if (_verbose >= VCRITICAL) {\ - if (err) \ - fprintf(stderr, "\t%s: %s: "message, \ - ERROR, strerror(err), ##args); \ - else \ - fprintf(stderr, "\t%s: "message, ERROR, ##args); \ - } \ -} while (0) - -#define fail(message, args...) \ -do { \ - if (_verbose >= VCRITICAL) \ - fprintf(stderr, "\t%s: "message, FAIL, ##args); \ -} while (0) - -#endif
linux-kselftest-mirror@lists.linaro.org
-
André Almeida -
kernel test robot