Add the flag IRQ_DOMAIN_FLAG_MSI_IMMUTABLE and the API function irq_domain_is_msi_immutable() to check if the MSI controller retains an immutable address/data pair during irq_set_affinity().

Ensure compatibility with MSI users like PCIe Endpoint Doorbell, which require the address/data pair to remain unchanged after setup. Use this function to verify if the MSI controller is immutable.

Signed-off-by: Frank Li Frank.Li@nxp.com --- change from v14 to v16 - none

change from v13 to v14 - Roll back to v12 version because Marc Zyngier have concern about add DOMAIN_BUS_DEVICE_PCI_EP_MSI. https://lore.kernel.org/imx/861pxfq315.wl-maz@kernel.org/

Change from v11 to v12 - change to IRQ_DOMAIN_FLAG_MSI_IMMUTABLE to minimized the code change. --- include/linux/irqdomain.h | 7 +++++++ 1 file changed, 7 insertions(+)

diff --git a/include/linux/irqdomain.h b/include/linux/irqdomain.h index 33ff41eef8f73..86222602744e9 100644 --- a/include/linux/irqdomain.h +++ b/include/linux/irqdomain.h @@ -231,6 +231,9 @@ enum { /* Irq domain must destroy generic chips when removed */ IRQ_DOMAIN_FLAG_DESTROY_GC = (1 << 10),

+ /* Address and data pair is mutable when irq_set_affinity() */ + IRQ_DOMAIN_FLAG_MSI_IMMUTABLE = (1 << 11), + /* * Flags starting from IRQ_DOMAIN_FLAG_NONCORE are reserved * for implementation specific purposes and ignored by the @@ -691,6 +694,10 @@ static inline bool irq_domain_is_msi_device(struct irq_domain *domain) return domain->flags & IRQ_DOMAIN_FLAG_MSI_DEVICE; }

+static inline bool irq_domain_is_msi_immutable(struct irq_domain *domain) +{ + return domain->flags & IRQ_DOMAIN_FLAG_MSI_IMMUTABLE; +} #else /* CONFIG_IRQ_DOMAIN_HIERARCHY */ static inline int irq_domain_alloc_irqs(struct irq_domain *domain, unsigned int nr_irqs, int node, void *arg)

Document the use of msi-map for PCI Endpoint (EP) controllers, which can use MSI as a doorbell mechanism. Each EP controller can support up to 8 physical functions and 65,536 virtual functions.

Define how to construct device IDs using function bits [2:0] and virtual function index bits [31:3], enabling msi-map to associate each child device with a specific msi-specifier.

Include a device tree example illustrating this configuration.

Signed-off-by: Frank Li Frank.Li@nxp.com --- change from v15 to v16 - new patch --- Documentation/devicetree/bindings/pci/pci-msi.txt | 51 +++++++++++++++++++++++ 1 file changed, 51 insertions(+)

diff --git a/Documentation/devicetree/bindings/pci/pci-msi.txt b/Documentation/devicetree/bindings/pci/pci-msi.txt index b73d839657b66..6a356707d01fc 100644 --- a/Documentation/devicetree/bindings/pci/pci-msi.txt +++ b/Documentation/devicetree/bindings/pci/pci-msi.txt @@ -218,3 +218,54 @@ Example (5) <0x0000 &msi_b 0x0000 0x10000>; }; }; + +PCI Endpoint +============ + +A PCI Endpoint (EP) can use MSI as a doorbell function. This is achieved by +mapping the MSI controller's address into PCI BAR<n>. The PCI Root Complex +can write to this BAR<n>, triggering the EP to generate IRQ. This notifies +the EP-side driver of an event, eliminating the need for the driver to +continuously poll for status changes. + +However, the EP cannot rely on Requester ID (RID) because the RID is +determined by the PCI topology of the host system. Since the EP may be +connected to different PCI hosts, the RID can vary between systems and is +therefore not a reliable identifier. + +Each EP can support up to 8 physical functions and up to 65,536 virtual +functions. To uniquely identify each child device, a device ID is defined +as + - Bits [2:0] for the function number (func) + - Bits [31:3] for the virtual function index (vfunc) + +The resulting device ID is computed as: + + (func & 0x7) | (vfunc << 3) + +msi-map can map it to an MSI controller and associated msi-specifier data. + +Example EP +========== +/ { + #address-cells = <1>; + #size-cells = <1>; + + msi: msi-controller@a { + reg = <0xa 0x1>; + compatible = "vendor,some-controller"; + msi-controller; + #msi-cells = <1>; + }; + + pci_ep: pci-ep@f { + reg = <0xf 0x1>; + compatible = "vendor,pcie-ep"; + + /* + * The sideband data provided to the MSI controller is + * the device id, function<n> maps to 0x80 + n. + */ + msi-map = <0x0 &msi_a 0x80 0x8>, + }; +};

Some platform devices create child devices dynamically and require the parent device's msi-map to map device IDs to actual sideband information.

A typical use case is using ITS as a PCIe Endpoint Controller(EPC)'s doorbell function, where PCI hosts send TLP memory writes to the EP controller. The EP controller converts these writes to AXI transactions and appends platform-specific sideband information.

EPC's DTS will provide such information by msi-map and msi-mask. A simplified dts as

pcie-ep@10000000 { ... msi-map = <0 &its 0xc 8>; ^^^ 0xc is implement defined sideband information, which append to AXI write transaction. ^ 0 is function index.

msi-mask = <0x7> }

Check msi-map if msi-parent missed to keep compatility with existed system.

Signed-off-by: Frank Li Frank.Li@nxp.com --- change from v15 to v16 - remove ascii figures in commit message

change from v14 to v15 - none

change from v13 to v14 new patch --- drivers/irqchip/irq-gic-v3-its-msi-parent.c | 8 ++++++++ 1 file changed, 8 insertions(+)

diff --git a/drivers/irqchip/irq-gic-v3-its-msi-parent.c b/drivers/irqchip/irq-gic-v3-its-msi-parent.c index bdb04c8081480..68f9ba4085ce5 100644 --- a/drivers/irqchip/irq-gic-v3-its-msi-parent.c +++ b/drivers/irqchip/irq-gic-v3-its-msi-parent.c @@ -118,6 +118,14 @@ static int of_pmsi_get_dev_id(struct irq_domain *domain, struct device *dev, index++; } while (!ret);

+ if (ret) { + struct device_node *np = NULL; + + ret = of_map_id(dev->of_node, dev->id, "msi-map", "msi-map-mask", &np, dev_id); + if (np) + of_node_put(np); + } + return ret; }

Doorbell feature is implemented by mapping the EP's MSI interrupt controller message address to a dedicated BAR in the EPC core. It is the responsibility of the EPF driver to pass the actual message data to be written by the host to the doorbell BAR region through its own logic.

Tested-by: Niklas Cassel cassel@kernel.org Signed-off-by: Frank Li Frank.Li@nxp.com --- Change from v15 to v16 - fix rebase conflict

Change from v14 to v15 - check CONFIG_GENERIC_MSI

Fix below build error | Reported-by: kernel test robot lkp@intel.com | Closes: https://lore.kernel.org/oe-kbuild-all/202502082204.6PRR3cfG-lkp@intel.com/

All errors (new ones prefixed by >>):

drivers/pci/endpoint/pci-ep-msi.c: In function 'pci_epf_alloc_doorbell':

...

drivers/pci/endpoint/pci-ep-msi.c:53:15: error: implicit declaration of function 'platform_device_msi_init_and_alloc_irqs' [-Werror=implicit-function-declaration]

53 | ret = platform_device_msi_init_and_alloc_irqs(&epf->dev, num_db, pci_epf_write_msi_msg);

| Reported-by: kernel test robot lkp@intel.com | Closes: https://lore.kernel.org/oe-kbuild-all/202502082242.pOq1hB1d-lkp@intel.com/

All errors (new ones prefixed by >>):

drivers/pci/endpoint/pci-ep-msi.c: In function 'pci_epf_alloc_doorbell':

...

drivers/pci/endpoint/pci-ep-msi.c:49:14: error: implicit declaration of function 'irq_domain_is_msi_immutable'; did you mean 'irq_domain_is_msi_device'? [-Werror=implicit-function-declaration]

49 | if (!irq_domain_is_msi_immutable(dom)) {

Change from v13 to v14 - basic roll back to v9 - use device:id as msi-map input, its will handle it - use existed platform_device_msi_init_and_alloc_irqs() - pass down epf->dev point, because epf->dev of-node will be the same as epc's parent.

Change from v12 to v13 - Use DOMAIN_BUS_DEVICE_PCI_EP_MSI

Change from v10 to v12 - none

Change from v9 to v10 - Create msi domain for each function device. - Remove only function support limiation. My hardware only support one function, so not test more than one case. - use "msi-map" descript msi information

msi-map = <func_no << 8 | vfunc_no, &its, start_stream_id, size>;

Chagne from v8 to v9 - sort header file - use pci_epc_get(dev_name(msi_desc_to_dev(desc))); - check epf number at pci_epf_alloc_doorbell - Add comments for miss msi-parent case

change from v5 to v8 -none

Change from v4 to v5 - Remove request_irq() in pci_epc_alloc_doorbell() and leave to EP function driver, so ep function driver can register differece call back function for difference doorbell events and set irq affinity to differece CPU core. - Improve error message when MSI allocate failure.

Change from v3 to v4 - msi change to use msi_get_virq() avoid use msi_for_each_desc(). - add new struct for pci_epf_doorbell_msg to msi msg,virq and irq name. - move mutex lock to epc function - initialize variable at declear place. - passdown epf to epc*() function to simplify code. --- drivers/pci/endpoint/Makefile | 1 + drivers/pci/endpoint/pci-ep-msi.c | 82 +++++++++++++++++++++++++++++++++++++++ include/linux/pci-ep-msi.h | 28 +++++++++++++ include/linux/pci-epf.h | 16 ++++++++ 4 files changed, 127 insertions(+)

diff --git a/drivers/pci/endpoint/Makefile b/drivers/pci/endpoint/Makefile index 95b2fe47e3b06..c502ea7ef367c 100644 --- a/drivers/pci/endpoint/Makefile +++ b/drivers/pci/endpoint/Makefile @@ -6,3 +6,4 @@ obj-$(CONFIG_PCI_ENDPOINT_CONFIGFS) += pci-ep-cfs.o obj-$(CONFIG_PCI_ENDPOINT) += pci-epc-core.o pci-epf-core.o\ pci-epc-mem.o functions/ +obj-$(CONFIG_GENERIC_MSI_IRQ) += pci-ep-msi.o diff --git a/drivers/pci/endpoint/pci-ep-msi.c b/drivers/pci/endpoint/pci-ep-msi.c new file mode 100644 index 0000000000000..549b55b864d0e --- /dev/null +++ b/drivers/pci/endpoint/pci-ep-msi.c @@ -0,0 +1,82 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * PCI Endpoint *Controller* (EPC) MSI library + * + * Copyright (C) 2025 NXP + * Author: Frank Li Frank.Li@nxp.com + */ + +#include <linux/device.h> +#include <linux/irqdomain.h> +#include <linux/module.h> +#include <linux/msi.h> +#include <linux/of_irq.h> +#include <linux/pci-epc.h> +#include <linux/pci-epf.h> +#include <linux/pci-ep-cfs.h> +#include <linux/pci-ep-msi.h> +#include <linux/slab.h> + +static void pci_epf_write_msi_msg(struct msi_desc *desc, struct msi_msg *msg) +{ + struct pci_epf *epf = to_pci_epf(desc->dev); + + if (epf && epf->db_msg && desc->msi_index < epf->num_db) + memcpy(&epf->db_msg[desc->msi_index].msg, msg, sizeof(*msg)); +} + +int pci_epf_alloc_doorbell(struct pci_epf *epf, u16 num_db) +{ + struct pci_epc *epc = epf->epc; + struct device *dev = &epf->dev; + struct irq_domain *dom; + void *msg; + u32 rid; + int ret; + int i; + + rid = PCI_EPF_DEVID(epf->func_no, epf->vfunc_no); + dom = of_msi_map_get_device_domain(epc->dev.parent, rid, DOMAIN_BUS_PLATFORM_MSI); + if (!dom) { + dev_err(dev, "Can't find msi domain\n"); + return -EINVAL; + } + + dev_set_msi_domain(dev, dom); + + msg = kcalloc(num_db, sizeof(struct pci_epf_doorbell_msg), GFP_KERNEL); + if (!msg) + return -ENOMEM; + + epf->num_db = num_db; + epf->db_msg = msg; + + ret = platform_device_msi_init_and_alloc_irqs(&epf->dev, num_db, pci_epf_write_msi_msg); + if (ret) { + /* + * The pcie_ep DT node has to specify 'msi-parent' for EP + * doorbell support to work. Right now only GIC ITS is + * supported. If you have GIC ITS and reached this print, + * perhaps you are missing 'msi-map' in DT. + */ + dev_err(dev, "Failed to allocate MSI\n"); + kfree(msg); + return -ENOMEM; + } + + for (i = 0; i < num_db; i++) + epf->db_msg[i].virq = msi_get_virq(dev, i); + + return ret; +} +EXPORT_SYMBOL_GPL(pci_epf_alloc_doorbell); + +void pci_epf_free_doorbell(struct pci_epf *epf) +{ + platform_device_msi_free_irqs_all(&epf->dev); + + kfree(epf->db_msg); + epf->db_msg = NULL; + epf->num_db = 0; +} +EXPORT_SYMBOL_GPL(pci_epf_free_doorbell); diff --git a/include/linux/pci-ep-msi.h b/include/linux/pci-ep-msi.h new file mode 100644 index 0000000000000..6dfbe9353f0d8 --- /dev/null +++ b/include/linux/pci-ep-msi.h @@ -0,0 +1,28 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * PCI Endpoint *Function* side MSI header file + * + * Copyright (C) 2024 NXP + * Author: Frank Li Frank.Li@nxp.com + */ + +#ifndef __PCI_EP_MSI__ +#define __PCI_EP_MSI__ + +struct pci_epf; + +#ifdef CONFIG_GENERIC_MSI_IRQ +int pci_epf_alloc_doorbell(struct pci_epf *epf, u16 nums); +void pci_epf_free_doorbell(struct pci_epf *epf); +#else +static inline int pci_epf_alloc_doorbell(struct pci_epf *epf, u16 nums) +{ + return -EINVAL; +} + +static inline void pci_epf_free_doorbell(struct pci_epf *epf) +{ +} +#endif /* CONFIG_GENERIC_MSI_IRQ */ + +#endif /* __PCI_EP_MSI__ */ diff --git a/include/linux/pci-epf.h b/include/linux/pci-epf.h index 1040d83740f9a..dcc6e2a2c6b3c 100644 --- a/include/linux/pci-epf.h +++ b/include/linux/pci-epf.h @@ -12,6 +12,7 @@ #include <linux/configfs.h> #include <linux/device.h> #include <linux/mod_devicetable.h> +#include <linux/msi.h> #include <linux/pci.h>

struct pci_epf; @@ -125,6 +126,17 @@ struct pci_epf_bar { int flags; };

+/** + * struct pci_epf_doorbell_msg - represents doorbell message + * @msi_msg: MSI message + * @virq: irq number of this doorbell MSI message + * @name: irq name for doorbell interrupt + */ +struct pci_epf_doorbell_msg { + struct msi_msg msg; + int virq; +}; + /** * struct pci_epf - represents the PCI EPF device * @dev: the PCI EPF device @@ -152,6 +164,8 @@ struct pci_epf_bar { * @vfunction_num_map: bitmap to manage virtual function number * @pci_vepf: list of virtual endpoint functions associated with this function * @event_ops: callbacks for capturing the EPC events + * @db_msg: data for MSI from RC side + * @num_db: number of doorbells */ struct pci_epf { struct device dev; @@ -182,6 +196,8 @@ struct pci_epf { unsigned long vfunction_num_map; struct list_head pci_vepf; const struct pci_epc_event_ops *event_ops; + struct pci_epf_doorbell_msg *db_msg; + u16 num_db; };

/**

Introduce the helper function pci_epf_align_inbound_addr() to adjust addresses according to PCI BAR alignment requirements, converting addresses into base and offset values.

Signed-off-by: Frank Li Frank.Li@nxp.com --- Change from v15 to v16 - none

Change from v14 to v15 - change out address type to dma_addr_t to fix below build issue

| Reported-by: kernel test robot lkp@intel.com | Closes: https://lore.kernel.org/oe-kbuild-all/202502082311.G1hWGggF-lkp@intel.com/

All errors (new ones prefixed by >>):

drivers/pci/endpoint/functions/pci-epf-test.c: In function 'pci_epf_test_enable_doorbell':

...

drivers/pci/endpoint/functions/pci-epf-test.c:726:42: error: passing argument 4 of 'pci_epf_align_inbound_addr' from incompatible pointer type [-Werror=incompatible-pointer-types]

726 | &epf_test->db_bar.phys_addr, &offset); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ | | | dma_addr_t * {aka unsigned int *} In file included from include/linux/pci-epc.h:12,

Change form v9 to v14 - none

change from v8 to v9 - pci_epf_align_inbound_addr(), base and off must be not NULL - rm pci_epf_align_inbound_addr_lo_hi()

change from v7 to v8 - change name to pci_epf_align_inbound_addr() - update comment said only need for memory, which not allocated by pci_epf_alloc_space().

change from v6 to v7 - new patch --- drivers/pci/endpoint/pci-epf-core.c | 44 +++++++++++++++++++++++++++++++++++++ include/linux/pci-epf.h | 3 +++ 2 files changed, 47 insertions(+)

diff --git a/drivers/pci/endpoint/pci-epf-core.c b/drivers/pci/endpoint/pci-epf-core.c index d04224b8e1631..529dbaaf76750 100644 --- a/drivers/pci/endpoint/pci-epf-core.c +++ b/drivers/pci/endpoint/pci-epf-core.c @@ -473,6 +473,50 @@ struct pci_epf *pci_epf_create(const char *name) } EXPORT_SYMBOL_GPL(pci_epf_create);

+/** + * pci_epf_align_inbound_addr() - Get base address and offset that match BAR's + * alignment requirement + * @epf: the EPF device + * @addr: the address of the memory + * @bar: the BAR number corresponding to map addr + * @base: return base address, which match BAR's alignment requirement. + * @off: return offset. + * + * Helper function to convert input 'addr' to base and offset, which match + * BAR's alignment requirement. + * + * The pci_epf_alloc_space() function already accounts for alignment. This is + * primarily intended for use with other memory regions not allocated by + * pci_epf_alloc_space(), such as peripheral register spaces or the trigger + * address for a platform MSI controller. + */ +int pci_epf_align_inbound_addr(struct pci_epf *epf, enum pci_barno bar, + u64 addr, dma_addr_t *base, size_t *off) +{ + const struct pci_epc_features *epc_features; + u64 align; + + if (!base || !off) + return -EINVAL; + + epc_features = pci_epc_get_features(epf->epc, epf->func_no, epf->vfunc_no); + if (!epc_features) { + dev_err(&epf->dev, "epc_features not implemented\n"); + return -EOPNOTSUPP; + } + + align = epc_features->align; + align = align ? align : 128; + if (epc_features->bar[bar].type == BAR_FIXED) + align = max(epc_features->bar[bar].fixed_size, align); + + *base = round_down(addr, align); + *off = addr & (align - 1); + + return 0; +} +EXPORT_SYMBOL_GPL(pci_epf_align_inbound_addr); + static void pci_epf_dev_release(struct device *dev) { struct pci_epf *epf = to_pci_epf(dev); diff --git a/include/linux/pci-epf.h b/include/linux/pci-epf.h index dcc6e2a2c6b3c..299ce1f1e2d80 100644 --- a/include/linux/pci-epf.h +++ b/include/linux/pci-epf.h @@ -241,6 +241,9 @@ void *pci_epf_alloc_space(struct pci_epf *epf, size_t size, enum pci_barno bar, enum pci_epc_interface_type type); void pci_epf_free_space(struct pci_epf *epf, void *addr, enum pci_barno bar, enum pci_epc_interface_type type); + +int pci_epf_align_inbound_addr(struct pci_epf *epf, enum pci_barno bar, + u64 addr, dma_addr_t *base, size_t *off); int pci_epf_bind(struct pci_epf *epf); void pci_epf_unbind(struct pci_epf *epf); int pci_epf_add_vepf(struct pci_epf *epf_pf, struct pci_epf *epf_vf);

Add three registers: PCIE_ENDPOINT_TEST_DB_BAR, PCIE_ENDPOINT_TEST_DB_ADDR, and PCIE_ENDPOINT_TEST_DB_DATA.

Trigger the doorbell by writing data from PCI_ENDPOINT_TEST_DB_DATA to the address provided by PCI_ENDPOINT_TEST_DB_OFFSET and wait for endpoint feedback.

Add two command to COMMAND_ENABLE_DOORBELL and COMMAND_DISABLE_DOORBELL to enable EP side's doorbell support and avoid compatible problem, which host side driver miss-match with endpoint side function driver. See below table:

Host side new driver Host side old driver EP: new driver S F EP: old driver F F

S: If EP side support MSI, 'pci_endpoint_test -f pcie_ep_doorbell' return success. If EP side doesn't support MSI, the same to 'F'.

F: 'pci_endpoint_test -f pcie_ep_doorbell' return failure, other case as usual.

Tested-by: Niklas Cassel cassel@kernel.org Signed-off-by: Frank Li Frank.Li@nxp.com --- change from v14 to v16 - none

Change from v13 to v14 - update to use pci_endpoint_test -f pcie_ep_doorbell - change ioctrl id to fix conflict

Change from v9 to v13 - none

Change from v8 to v9 - change PCITEST_DOORBELL to 0xa

Change form v6 to v8 - none

Change from v5 to v6 - %s/PCI_ENDPOINT_TEST_DB_ADDR/PCI_ENDPOINT_TEST_DB_OFFSET/g

Change from v4 to v5 - remove unused varible - add irq_type at pci_endpoint_test_doorbell();

change from v3 to v4 - Add COMMAND_ENABLE_DOORBELL and COMMAND_DISABLE_DOORBELL. - Remove new DID requirement. --- drivers/misc/pci_endpoint_test.c | 82 ++++++++++++++++++++++++++++++++++++++++ include/uapi/linux/pcitest.h | 1 + 2 files changed, 83 insertions(+)

diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c index c4e5e2c977be2..0f3af7adea107 100644 --- a/drivers/misc/pci_endpoint_test.c +++ b/drivers/misc/pci_endpoint_test.c @@ -37,6 +37,8 @@ #define COMMAND_READ BIT(3) #define COMMAND_WRITE BIT(4) #define COMMAND_COPY BIT(5) +#define COMMAND_ENABLE_DOORBELL BIT(6) +#define COMMAND_DISABLE_DOORBELL BIT(7)

#define PCI_ENDPOINT_TEST_STATUS 0x8 #define STATUS_READ_SUCCESS BIT(0) @@ -48,6 +50,11 @@ #define STATUS_IRQ_RAISED BIT(6) #define STATUS_SRC_ADDR_INVALID BIT(7) #define STATUS_DST_ADDR_INVALID BIT(8) +#define STATUS_DOORBELL_SUCCESS BIT(9) +#define STATUS_DOORBELL_ENABLE_SUCCESS BIT(10) +#define STATUS_DOORBELL_ENABLE_FAIL BIT(11) +#define STATUS_DOORBELL_DISABLE_SUCCESS BIT(12) +#define STATUS_DOORBELL_DISABLE_FAIL BIT(13)

#define PCI_ENDPOINT_TEST_LOWER_SRC_ADDR 0x0c #define PCI_ENDPOINT_TEST_UPPER_SRC_ADDR 0x10 @@ -62,6 +69,7 @@ #define PCI_ENDPOINT_TEST_IRQ_NUMBER 0x28

#define PCI_ENDPOINT_TEST_FLAGS 0x2c + #define FLAG_USE_DMA BIT(0)

#define PCI_ENDPOINT_TEST_CAPS 0x30 @@ -70,6 +78,10 @@ #define CAP_MSIX BIT(2) #define CAP_INTX BIT(3)

+#define PCI_ENDPOINT_TEST_DB_BAR 0x34 +#define PCI_ENDPOINT_TEST_DB_OFFSET 0x38 +#define PCI_ENDPOINT_TEST_DB_DATA 0x3c + #define PCI_DEVICE_ID_TI_AM654 0xb00c #define PCI_DEVICE_ID_TI_J7200 0xb00f #define PCI_DEVICE_ID_TI_AM64 0xb010 @@ -100,6 +112,7 @@ enum pci_barno { BAR_3, BAR_4, BAR_5, + NO_BAR = -1, };

struct pci_endpoint_test { @@ -841,6 +854,72 @@ static int pci_endpoint_test_set_irq(struct pci_endpoint_test *test, return 0; }

+static int pci_endpoint_test_doorbell(struct pci_endpoint_test *test) +{ + struct pci_dev *pdev = test->pdev; + struct device *dev = &pdev->dev; + int irq_type = test->irq_type; + enum pci_barno bar; + u32 data, status; + u32 addr; + + if (irq_type < PCITEST_IRQ_TYPE_INTX || + irq_type > PCITEST_IRQ_TYPE_MSIX) { + dev_err(dev, "Invalid IRQ type option\n"); + return -EINVAL; + } + + pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_TYPE, irq_type); + pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_NUMBER, 1); + pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND, + COMMAND_ENABLE_DOORBELL); + + wait_for_completion_timeout(&test->irq_raised, msecs_to_jiffies(1000)); + + status = pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_STATUS); + if (status & STATUS_DOORBELL_ENABLE_FAIL) { + dev_err(dev, "Failed to enable doorbell\n"); + return -EINVAL; + } + + data = pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_DB_DATA); + addr = pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_DB_OFFSET); + bar = pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_DB_BAR); + + pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_TYPE, irq_type); + pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_NUMBER, 1); + + pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_STATUS, 0); + + bar = pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_DB_BAR); + + writel(data, test->bar[bar] + addr); + + wait_for_completion_timeout(&test->irq_raised, msecs_to_jiffies(1000)); + + status = pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_STATUS); + + if (!(status & STATUS_DOORBELL_SUCCESS)) + dev_err(dev, "Endpoint have not received Doorbell\n"); + + pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND, + COMMAND_DISABLE_DOORBELL); + + wait_for_completion_timeout(&test->irq_raised, msecs_to_jiffies(1000)); + + status |= pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_STATUS); + + if (status & STATUS_DOORBELL_DISABLE_FAIL) { + dev_err(dev, "Failed to disable doorbell\n"); + return -EINVAL; + } + + if (!(status & STATUS_DOORBELL_SUCCESS)) + return -EINVAL; + + return 0; +} + static long pci_endpoint_test_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { @@ -891,6 +970,9 @@ static long pci_endpoint_test_ioctl(struct file *file, unsigned int cmd, case PCITEST_CLEAR_IRQ: ret = pci_endpoint_test_clear_irq(test); break; + case PCITEST_DOORBELL: + ret = pci_endpoint_test_doorbell(test); + break; }

ret: diff --git a/include/uapi/linux/pcitest.h b/include/uapi/linux/pcitest.h index d3aa8715a525e..d6023a45a9d03 100644 --- a/include/uapi/linux/pcitest.h +++ b/include/uapi/linux/pcitest.h @@ -21,6 +21,7 @@ #define PCITEST_SET_IRQTYPE _IOW('P', 0x8, int) #define PCITEST_GET_IRQTYPE _IO('P', 0x9) #define PCITEST_BARS _IO('P', 0xa) +#define PCITEST_DOORBELL _IO('P', 0xb) #define PCITEST_CLEAR_IRQ _IO('P', 0x10)

#define PCITEST_IRQ_TYPE_UNDEFINED -1

Add helper function imx_pcie_add_lut_by_rid(), which will be used for Endpoint mode in the future. No functional change.

Signed-off-by: Frank Li Frank.Li@nxp.com --- change from v14 to v16 - none

change from v13 to v14 - new patch --- drivers/pci/controller/dwc/pci-imx6.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c index 5f267dd261b51..d1b1365e7469e 100644 --- a/drivers/pci/controller/dwc/pci-imx6.c +++ b/drivers/pci/controller/dwc/pci-imx6.c @@ -1025,18 +1025,14 @@ static void imx_pcie_remove_lut(struct imx_pcie *imx_pcie, u16 rid) } }

-static int imx_pcie_enable_device(struct pci_host_bridge *bridge, - struct pci_dev *pdev) +static int imx_pcie_add_lut_by_rid(struct imx_pcie *imx_pcie, u32 rid) { - struct imx_pcie *imx_pcie = to_imx_pcie(to_dw_pcie_from_pp(bridge->sysdata)); - u32 sid_i, sid_m, rid = pci_dev_id(pdev); + struct device *dev = imx_pcie->pci->dev; struct device_node *target; - struct device *dev; + u32 sid_i, sid_m; int err_i, err_m; u32 sid = 0;

- dev = imx_pcie->pci->dev; - target = NULL; err_i = of_map_id(dev->of_node, rid, "iommu-map", "iommu-map-mask", &target, &sid_i); @@ -1111,6 +1107,13 @@ static int imx_pcie_enable_device(struct pci_host_bridge *bridge, return imx_pcie_add_lut(imx_pcie, rid, sid); }

+static int imx_pcie_enable_device(struct pci_host_bridge *bridge, struct pci_dev *pdev) +{ + struct imx_pcie *imx_pcie = to_imx_pcie(to_dw_pcie_from_pp(bridge->sysdata)); + + return imx_pcie_add_lut_by_rid(imx_pcie, pci_dev_id(pdev)); +} + static void imx_pcie_disable_device(struct pci_host_bridge *bridge, struct pci_dev *pdev) {

Add msi-map for pci-ep device.

Signed-off-by: Frank Li Frank.Li@nxp.com --- change from v14 to v16 - none

change from v13 to v14 - new patch --- arch/arm64/boot/dts/freescale/imx95.dtsi | 1 + 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/freescale/imx95.dtsi b/arch/arm64/boot/dts/freescale/imx95.dtsi index 15ba83ce691f4..c3c76991f1c8e 100644 --- a/arch/arm64/boot/dts/freescale/imx95.dtsi +++ b/arch/arm64/boot/dts/freescale/imx95.dtsi @@ -1768,6 +1768,7 @@ pcie1_ep: pcie-ep@4c380000 { assigned-clock-rates = <3600000000>, <100000000>, <10000000>; assigned-clock-parents = <0>, <0>, <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>; + msi-map = <0x0 &its 0x98 0x1>; power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>; status = "disabled"; };