ADI is a feature supported on SPARC M7 and newer processors to allow hardware to catch rogue accesses to memory. ADI is supported for data fetches only and not instruction fetches. An app can enable ADI on its data pages, set version tags on them and use versioned addresses to access the data pages. Upper bits of the address contain the version tag. On M7 processors, upper four bits (bits 63-60) contain the version tag. If a rogue app attempts to access ADI enabled data pages, its access is blocked and processor generates an exception. Please see Documentation/sparc/adi.txt for further details.
This patchset implements a char driver to read/write ADI versions from privileged user space processes. Intended consumers are makedumpfile and crash.
v5: * Fixed MODULE_LICENSE() for adi.c v4: * Fixed messed up subject lines. v3: * Really fixed the copyright headers to use SPDX GPL v2. Really. v2: * Simplified copyright headers * Completely reworked sparc64 selftests Makefiles. Used the android selftests Makefiles as an example * Added run.sh and drivers_test.sh to the sparc64 selftest directory. Used bpf/test_kmod.sh and the android selftests as examples * Minor cleanups in the selftest adi-test.c * Added calls to ksft_test_*() in the adi-test.c
Tom Hromatka (2): char: sparc64: Add privileged ADI driver selftests: sparc64: char: Selftest for privileged ADI driver
drivers/char/Kconfig | 12 + drivers/char/Makefile | 1 + drivers/char/adi.c | 240 +++++++ tools/testing/selftests/Makefile | 1 + tools/testing/selftests/sparc64/Makefile | 46 ++ tools/testing/selftests/sparc64/drivers/.gitignore | 1 + tools/testing/selftests/sparc64/drivers/Makefile | 15 + tools/testing/selftests/sparc64/drivers/adi-test.c | 721 +++++++++++++++++++++ .../selftests/sparc64/drivers/drivers_test.sh | 30 + tools/testing/selftests/sparc64/run.sh | 3 + 10 files changed, 1070 insertions(+) create mode 100644 drivers/char/adi.c create mode 100644 tools/testing/selftests/sparc64/Makefile create mode 100644 tools/testing/selftests/sparc64/drivers/.gitignore create mode 100644 tools/testing/selftests/sparc64/drivers/Makefile create mode 100644 tools/testing/selftests/sparc64/drivers/adi-test.c create mode 100755 tools/testing/selftests/sparc64/drivers/drivers_test.sh create mode 100755 tools/testing/selftests/sparc64/run.sh
SPARC M7 and newer processors utilize ADI to version and protect memory. This driver is capable of reading/writing ADI/MCD versions from privileged user space processes. Addresses in the adi file are mapped linearly to physical memory at a ratio of 1:adi_blksz. Thus, a read (or write) of offset K in the file operates upon the ADI version at physical address K * adi_blksz. The version information is encoded as one version per byte. Intended consumers are makedumpfile and crash.
Signed-off-by: Tom Hromatka tom.hromatka@oracle.com Reviewed-by: Khalid Aziz khalid.aziz@oracle.com Reviewed-by: Shannon Nelson shannon.nelson@oracle.com Reviewed-by: Anthony Yznaga anthony.yznaga@oracle.com --- drivers/char/Kconfig | 12 +++ drivers/char/Makefile | 1 + drivers/char/adi.c | 240 ++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 253 insertions(+) create mode 100644 drivers/char/adi.c
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 40947a796666..5ecddc95a698 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -540,5 +540,17 @@ source "drivers/s390/char/Kconfig"
source "drivers/char/xillybus/Kconfig"
+config ADI + tristate "SPARC Privileged ADI driver" + depends on SPARC64 + default m + help + SPARC M7 and newer processors utilize ADI (Application Data + Integrity) to version and protect memory. This driver provides + read/write access to the ADI versions for privileged processes. + This feature is also known as MCD (Memory Corruption Detection) + and SSM (Silicon Secured Memory). Intended consumers of this + driver include crash and makedumpfile. + endmenu
diff --git a/drivers/char/Makefile b/drivers/char/Makefile index c97c768cd1dd..b8d42b4e979b 100644 --- a/drivers/char/Makefile +++ b/drivers/char/Makefile @@ -57,3 +57,4 @@ js-rtc-y = rtc.o
obj-$(CONFIG_XILLYBUS) += xillybus/ obj-$(CONFIG_POWERNV_OP_PANEL) += powernv-op-panel.o +obj-$(CONFIG_ADI) += adi.o diff --git a/drivers/char/adi.c b/drivers/char/adi.c new file mode 100644 index 000000000000..062b0d7feda2 --- /dev/null +++ b/drivers/char/adi.c @@ -0,0 +1,240 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Privileged ADI driver for sparc64 + * + * Author: Tom Hromatka tom.hromatka@oracle.com + */ +#include <linux/kernel.h> +#include <linux/miscdevice.h> +#include <linux/module.h> +#include <linux/proc_fs.h> +#include <linux/slab.h> +#include <linux/uaccess.h> +#include <asm/asi.h> + +#define MODULE_NAME "adi" +#define MAX_BUF_SZ 4096 + +static int adi_open(struct inode *inode, struct file *file) +{ + file->f_mode |= FMODE_UNSIGNED_OFFSET; + return 0; +} + +static int read_mcd_tag(unsigned long addr) +{ + long err; + int ver; + + __asm__ __volatile__( + "1: ldxa [%[addr]] %[asi], %[ver]\n" + " mov 0, %[err]\n" + "2:\n" + " .section .fixup,#alloc,#execinstr\n" + " .align 4\n" + "3: sethi %%hi(2b), %%g1\n" + " jmpl %%g1 + %%lo(2b), %%g0\n" + " mov %[invalid], %[err]\n" + " .previous\n" + " .section __ex_table, "a"\n" + " .align 4\n" + " .word 1b, 3b\n" + " .previous\n" + : [ver] "=r" (ver), [err] "=r" (err) + : [addr] "r" (addr), [invalid] "i" (EFAULT), + [asi] "i" (ASI_MCD_REAL) + : "memory", "g1" + ); + + if (err) + return -EFAULT; + else + return ver; +} + +static ssize_t adi_read(struct file *file, char __user *buf, + size_t count, loff_t *offp) +{ + size_t ver_buf_sz, bytes_read = 0; + int ver_buf_idx = 0; + loff_t offset; + u8 *ver_buf; + ssize_t ret; + + ver_buf_sz = min_t(size_t, count, MAX_BUF_SZ); + ver_buf = kmalloc(ver_buf_sz, GFP_KERNEL); + if (!ver_buf) + return -ENOMEM; + + offset = (*offp) * adi_blksize(); + + while (bytes_read < count) { + ret = read_mcd_tag(offset); + if (ret < 0) + goto out; + + ver_buf[ver_buf_idx] = (u8)ret; + ver_buf_idx++; + offset += adi_blksize(); + + if (ver_buf_idx >= ver_buf_sz) { + if (copy_to_user(buf + bytes_read, ver_buf, + ver_buf_sz)) { + ret = -EFAULT; + goto out; + } + + bytes_read += ver_buf_sz; + ver_buf_idx = 0; + + ver_buf_sz = min(count - bytes_read, + (size_t)MAX_BUF_SZ); + } + } + + (*offp) += bytes_read; + ret = bytes_read; +out: + kfree(ver_buf); + return ret; +} + +static int set_mcd_tag(unsigned long addr, u8 ver) +{ + long err; + + __asm__ __volatile__( + "1: stxa %[ver], [%[addr]] %[asi]\n" + " mov 0, %[err]\n" + "2:\n" + " .section .fixup,#alloc,#execinstr\n" + " .align 4\n" + "3: sethi %%hi(2b), %%g1\n" + " jmpl %%g1 + %%lo(2b), %%g0\n" + " mov %[invalid], %[err]\n" + " .previous\n" + " .section __ex_table, "a"\n" + " .align 4\n" + " .word 1b, 3b\n" + " .previous\n" + : [err] "=r" (err) + : [ver] "r" (ver), [addr] "r" (addr), + [invalid] "i" (EFAULT), [asi] "i" (ASI_MCD_REAL) + : "memory", "g1" + ); + + if (err) + return -EFAULT; + else + return ver; +} + +static ssize_t adi_write(struct file *file, const char __user *buf, + size_t count, loff_t *offp) +{ + size_t ver_buf_sz, bytes_written = 0; + loff_t offset; + u8 *ver_buf; + ssize_t ret; + int i; + + if (count <= 0) + return -EINVAL; + + ver_buf_sz = min_t(size_t, count, MAX_BUF_SZ); + ver_buf = kmalloc(ver_buf_sz, (size_t)GFP_KERNEL); + if (!ver_buf) + return -ENOMEM; + + offset = (*offp) * adi_blksize(); + + do { + if (copy_from_user(ver_buf, &buf[bytes_written], + ver_buf_sz)) { + ret = -EFAULT; + goto out; + } + + for (i = 0; i < ver_buf_sz; i++) { + ret = set_mcd_tag(offset, ver_buf[i]); + if (ret < 0) + goto out; + + offset += adi_blksize(); + } + + bytes_written += ver_buf_sz; + ver_buf_sz = min(count - bytes_written, (size_t)MAX_BUF_SZ); + } while (bytes_written < count); + + (*offp) += bytes_written; + ret = bytes_written; +out: + __asm__ __volatile__("membar #Sync"); + kfree(ver_buf); + return ret; +} + +static loff_t adi_llseek(struct file *file, loff_t offset, int whence) +{ + loff_t ret = -EINVAL; + + switch (whence) { + case SEEK_END: + case SEEK_DATA: + case SEEK_HOLE: + /* unsupported */ + return -EINVAL; + case SEEK_CUR: + if (offset == 0) + return file->f_pos; + + offset += file->f_pos; + break; + case SEEK_SET: + break; + } + + if (offset != file->f_pos) { + file->f_pos = offset; + file->f_version = 0; + ret = offset; + } + + return ret; +} + +static const struct file_operations adi_fops = { + .owner = THIS_MODULE, + .llseek = adi_llseek, + .open = adi_open, + .read = adi_read, + .write = adi_write, +}; + +static struct miscdevice adi_miscdev = { + .minor = MISC_DYNAMIC_MINOR, + .name = MODULE_NAME, + .fops = &adi_fops, +}; + +static int __init adi_init(void) +{ + if (!adi_capable()) + return -EPERM; + + return misc_register(&adi_miscdev); +} + +static void __exit adi_exit(void) +{ + misc_deregister(&adi_miscdev); +} + +module_init(adi_init); +module_exit(adi_exit); + +MODULE_AUTHOR("Tom Hromatka tom.hromatka@oracle.com"); +MODULE_DESCRIPTION("Privileged interface to ADI"); +MODULE_VERSION("1.0"); +MODULE_LICENSE("GPL v2");
On Mon, Apr 23, 2018 at 11:33:31AM -0600, Tom Hromatka wrote:
SPARC M7 and newer processors utilize ADI to version and protect memory. This driver is capable of reading/writing ADI/MCD versions from privileged user space processes. Addresses in the adi file are mapped linearly to physical memory at a ratio of 1:adi_blksz. Thus, a read (or write) of offset K in the file operates upon the ADI version at physical address K * adi_blksz. The version information is encoded as one version per byte. Intended consumers are makedumpfile and crash.
What do you mean by "crash"? Should this tie into the pstore infrastructure, or is this just a userspace thing? Just curious.
Minor code comments below now that the license stuff is correct, I decided to read the code :)
+#include <linux/kernel.h> +#include <linux/miscdevice.h> +#include <linux/module.h> +#include <linux/proc_fs.h> +#include <linux/slab.h> +#include <linux/uaccess.h> +#include <asm/asi.h>
+#define MODULE_NAME "adi"
What's wrong with KBUILD_MODNAME? Just use that instead of MODULE_NAME later on in the file.
+#define MAX_BUF_SZ 4096
PAGE_SIZE? Just curious.
+static int adi_open(struct inode *inode, struct file *file) +{
- file->f_mode |= FMODE_UNSIGNED_OFFSET;
That's odd, why?
- return 0;
+}
+static int read_mcd_tag(unsigned long addr) +{
- long err;
- int ver;
- __asm__ __volatile__(
"1: ldxa [%[addr]] %[asi], %[ver]\n"" mov 0, %[err]\n""2:\n"" .section .fixup,#alloc,#execinstr\n"" .align 4\n""3: sethi %%hi(2b), %%g1\n"" jmpl %%g1 + %%lo(2b), %%g0\n"" mov %[invalid], %[err]\n"" .previous\n"" .section __ex_table, \"a\"\n"" .align 4\n"" .word 1b, 3b\n"" .previous\n": [ver] "=r" (ver), [err] "=r" (err): [addr] "r" (addr), [invalid] "i" (EFAULT),[asi] "i" (ASI_MCD_REAL): "memory", "g1");- if (err)
return -EFAULT;- else
return ver;+}
+static ssize_t adi_read(struct file *file, char __user *buf,
size_t count, loff_t *offp)+{
- size_t ver_buf_sz, bytes_read = 0;
- int ver_buf_idx = 0;
- loff_t offset;
- u8 *ver_buf;
- ssize_t ret;
- ver_buf_sz = min_t(size_t, count, MAX_BUF_SZ);
- ver_buf = kmalloc(ver_buf_sz, GFP_KERNEL);
- if (!ver_buf)
return -ENOMEM;- offset = (*offp) * adi_blksize();
- while (bytes_read < count) {
ret = read_mcd_tag(offset);if (ret < 0)goto out;ver_buf[ver_buf_idx] = (u8)ret;
Are you sure ret fits in 8 bits here?
ver_buf_idx++;offset += adi_blksize();if (ver_buf_idx >= ver_buf_sz) {if (copy_to_user(buf + bytes_read, ver_buf,ver_buf_sz)) {ret = -EFAULT;goto out;}bytes_read += ver_buf_sz;ver_buf_idx = 0;ver_buf_sz = min(count - bytes_read,(size_t)MAX_BUF_SZ);}- }
- (*offp) += bytes_read;
- ret = bytes_read;
+out:
- kfree(ver_buf);
- return ret;
+}
+static int set_mcd_tag(unsigned long addr, u8 ver) +{
- long err;
- __asm__ __volatile__(
"1: stxa %[ver], [%[addr]] %[asi]\n"" mov 0, %[err]\n""2:\n"" .section .fixup,#alloc,#execinstr\n"" .align 4\n""3: sethi %%hi(2b), %%g1\n"" jmpl %%g1 + %%lo(2b), %%g0\n"" mov %[invalid], %[err]\n"" .previous\n"" .section __ex_table, \"a\"\n"" .align 4\n"" .word 1b, 3b\n"" .previous\n": [err] "=r" (err): [ver] "r" (ver), [addr] "r" (addr),[invalid] "i" (EFAULT), [asi] "i" (ASI_MCD_REAL): "memory", "g1");- if (err)
return -EFAULT;- else
return ver;+}
+static ssize_t adi_write(struct file *file, const char __user *buf,
size_t count, loff_t *offp)+{
- size_t ver_buf_sz, bytes_written = 0;
- loff_t offset;
- u8 *ver_buf;
- ssize_t ret;
- int i;
- if (count <= 0)
return -EINVAL;- ver_buf_sz = min_t(size_t, count, MAX_BUF_SZ);
- ver_buf = kmalloc(ver_buf_sz, (size_t)GFP_KERNEL);
(size_t) for GFP_KERNEL? That's really odd looking.
- if (!ver_buf)
return -ENOMEM;- offset = (*offp) * adi_blksize();
- do {
if (copy_from_user(ver_buf, &buf[bytes_written],ver_buf_sz)) {ret = -EFAULT;goto out;}for (i = 0; i < ver_buf_sz; i++) {ret = set_mcd_tag(offset, ver_buf[i]);if (ret < 0)goto out;offset += adi_blksize();}bytes_written += ver_buf_sz;ver_buf_sz = min(count - bytes_written, (size_t)MAX_BUF_SZ);- } while (bytes_written < count);
- (*offp) += bytes_written;
- ret = bytes_written;
+out:
- __asm__ __volatile__("membar #Sync");
- kfree(ver_buf);
- return ret;
+}
+static loff_t adi_llseek(struct file *file, loff_t offset, int whence) +{
- loff_t ret = -EINVAL;
- switch (whence) {
- case SEEK_END:
- case SEEK_DATA:
- case SEEK_HOLE:
/* unsupported */return -EINVAL;- case SEEK_CUR:
if (offset == 0)return file->f_pos;offset += file->f_pos;break;- case SEEK_SET:
break;- }
- if (offset != file->f_pos) {
file->f_pos = offset;file->f_version = 0;ret = offset;- }
- return ret;
+}
Why can't you use default_llseek here? Why do you not allow HOLE and others?
Anyway, just tiny questions, all are trivial and not really a big deal if you have tested it on your hardware. I'm guessing this will go through the SPARC tree? If so feel free to add:
Reviewed-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
Or if you want/need me to take it through my char/misc tree, just let me know and I can.
thanks,
greg k-h -- To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 04/23/2018 11:52 AM, Greg KH wrote:
On Mon, Apr 23, 2018 at 11:33:31AM -0600, Tom Hromatka wrote:
SPARC M7 and newer processors utilize ADI to version and protect memory. This driver is capable of reading/writing ADI/MCD versions from privileged user space processes. Addresses in the adi file are mapped linearly to physical memory at a ratio of 1:adi_blksz. Thus, a read (or write) of offset K in the file operates upon the ADI version at physical address K * adi_blksz. The version information is encoded as one version per byte. Intended consumers are makedumpfile and crash.
What do you mean by "crash"? Should this tie into the pstore infrastructure, or is this just a userspace thing? Just curious.
My apologies. I was referring to the crash utility: https://github.com/crash-utility/crash
A future commit to store the ADI versions to the pstore would be really cool. I am fearful the amount of ADI data could overwhelm the pstore, though. The latest sparc machines support 4 TB of RAM which could mean several GBs of ADI versions. But storing the ADI versions pertaining to the failing code should be possible. I need to do more research...
Minor code comments below now that the license stuff is correct, I decided to read the code :)
:)
+#include <linux/kernel.h> +#include <linux/miscdevice.h> +#include <linux/module.h> +#include <linux/proc_fs.h> +#include <linux/slab.h> +#include <linux/uaccess.h> +#include <asm/asi.h>
+#define MODULE_NAME "adi"
What's wrong with KBUILD_MODNAME? Just use that instead of MODULE_NAME later on in the file.
Good catch. I'll do that in the next rev of this patch.
+#define MAX_BUF_SZ 4096
PAGE_SIZE? Just curious.
When a user requests a large read/write in makedumpfile or the crash utility, these tools typically make requests in 4096-sized chunks. I believe you are correct that these operations are based upon page size, but I have not verified. I was hesitant to connect MAX_BUF_SZ to PAGE_SIZE without this verification. I'll look into it more...
+static int adi_open(struct inode *inode, struct file *file) +{
- file->f_mode |= FMODE_UNSIGNED_OFFSET;
That's odd, why?
sparc64 currently supports 4 TB of RAM (and could support much more in the future). Offsets into this ADI privileged driver are address / 64, but that could change also in the future depending upon cache line sizes. I was afraid that future sparc systems could have very large file offsets. Overkill?
- return 0;
+}
+static int read_mcd_tag(unsigned long addr) +{
- long err;
- int ver;
- __asm__ __volatile__(
"1: ldxa [%[addr]] %[asi], %[ver]\n"" mov 0, %[err]\n""2:\n"" .section .fixup,#alloc,#execinstr\n"" .align 4\n""3: sethi %%hi(2b), %%g1\n"" jmpl %%g1 + %%lo(2b), %%g0\n"" mov %[invalid], %[err]\n"" .previous\n"" .section __ex_table, \"a\"\n"" .align 4\n"" .word 1b, 3b\n"" .previous\n": [ver] "=r" (ver), [err] "=r" (err): [addr] "r" (addr), [invalid] "i" (EFAULT),[asi] "i" (ASI_MCD_REAL): "memory", "g1");- if (err)
return -EFAULT;- else
return ver;+}
+static ssize_t adi_read(struct file *file, char __user *buf,
size_t count, loff_t *offp)+{
- size_t ver_buf_sz, bytes_read = 0;
- int ver_buf_idx = 0;
- loff_t offset;
- u8 *ver_buf;
- ssize_t ret;
- ver_buf_sz = min_t(size_t, count, MAX_BUF_SZ);
- ver_buf = kmalloc(ver_buf_sz, GFP_KERNEL);
- if (!ver_buf)
return -ENOMEM;- offset = (*offp) * adi_blksize();
- while (bytes_read < count) {
ret = read_mcd_tag(offset);if (ret < 0)goto out;ver_buf[ver_buf_idx] = (u8)ret;Are you sure ret fits in 8 bits here?
Yes, I believe so. read_mcd_tag() will return a negative number on an error - which is checked a couple lines above. Otherwise, the read succeeded which means a valid ADI version was returned. Valid ADI versions are 0 through 16.
ver_buf_idx++;offset += adi_blksize();if (ver_buf_idx >= ver_buf_sz) {if (copy_to_user(buf + bytes_read, ver_buf,ver_buf_sz)) {ret = -EFAULT;goto out;}bytes_read += ver_buf_sz;ver_buf_idx = 0;ver_buf_sz = min(count - bytes_read,(size_t)MAX_BUF_SZ);}- }
- (*offp) += bytes_read;
- ret = bytes_read;
+out:
- kfree(ver_buf);
- return ret;
+}
+static int set_mcd_tag(unsigned long addr, u8 ver) +{
- long err;
- __asm__ __volatile__(
"1: stxa %[ver], [%[addr]] %[asi]\n"" mov 0, %[err]\n""2:\n"" .section .fixup,#alloc,#execinstr\n"" .align 4\n""3: sethi %%hi(2b), %%g1\n"" jmpl %%g1 + %%lo(2b), %%g0\n"" mov %[invalid], %[err]\n"" .previous\n"" .section __ex_table, \"a\"\n"" .align 4\n"" .word 1b, 3b\n"" .previous\n": [err] "=r" (err): [ver] "r" (ver), [addr] "r" (addr),[invalid] "i" (EFAULT), [asi] "i" (ASI_MCD_REAL): "memory", "g1");- if (err)
return -EFAULT;- else
return ver;+}
+static ssize_t adi_write(struct file *file, const char __user *buf,
size_t count, loff_t *offp)+{
- size_t ver_buf_sz, bytes_written = 0;
- loff_t offset;
- u8 *ver_buf;
- ssize_t ret;
- int i;
- if (count <= 0)
return -EINVAL;- ver_buf_sz = min_t(size_t, count, MAX_BUF_SZ);
- ver_buf = kmalloc(ver_buf_sz, (size_t)GFP_KERNEL);
(size_t) for GFP_KERNEL? That's really odd looking.
Agreed. Good find.
- if (!ver_buf)
return -ENOMEM;- offset = (*offp) * adi_blksize();
- do {
if (copy_from_user(ver_buf, &buf[bytes_written],ver_buf_sz)) {ret = -EFAULT;goto out;}for (i = 0; i < ver_buf_sz; i++) {ret = set_mcd_tag(offset, ver_buf[i]);if (ret < 0)goto out;offset += adi_blksize();}bytes_written += ver_buf_sz;ver_buf_sz = min(count - bytes_written, (size_t)MAX_BUF_SZ);- } while (bytes_written < count);
- (*offp) += bytes_written;
- ret = bytes_written;
+out:
- __asm__ __volatile__("membar #Sync");
- kfree(ver_buf);
- return ret;
+}
+static loff_t adi_llseek(struct file *file, loff_t offset, int whence) +{
- loff_t ret = -EINVAL;
- switch (whence) {
- case SEEK_END:
- case SEEK_DATA:
- case SEEK_HOLE:
/* unsupported */return -EINVAL;- case SEEK_CUR:
if (offset == 0)return file->f_pos;offset += file->f_pos;break;- case SEEK_SET:
break;- }
- if (offset != file->f_pos) {
file->f_pos = offset;file->f_version = 0;ret = offset;- }
- return ret;
+}
Why can't you use default_llseek here? Why do you not allow HOLE and others?
I believe default_llseek() would work, but I chose not to use it because I haven't tested some cases - like SEEK_HOLE. My ADI changes to makedumpfile and crash utility don't utilize SEEK_HOLE. I felt uncomfortable providing a feature without testing it thoroughly, so I decided to save it for a future patchset.
Anyway, just tiny questions, all are trivial and not really a big deal if you have tested it on your hardware. I'm guessing this will go through the SPARC tree? If so feel free to add:
That was my plan since this driver is only applicable to sparc64 machines. But I'm open to however you and Dave M think it would be best to proceed.
Reviewed-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
Or if you want/need me to take it through my char/misc tree, just let me know and I can.
Thanks so much for the help. I really appreciate it.
Tom
thanks,
greg k-h
-- To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Add a selftest for the sparc64 privileged ADI driver. These tests verify the read(), pread(), write(), pwrite(), and seek() functionality of the driver. The tests also report simple performance statistics:
Syscall Call AvgTime AvgSize Count (ticks) (bytes) ------------------------------- read 3 119638 8133 pread 4 118164 6741 write 3 339442 8133 pwrite 4 280134 6741 seek 10 2919 0 Pass 8 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0
Signed-off-by: Tom Hromatka tom.hromatka@oracle.com Reviewed-by: Allen Pais allen.pais@oracle.com --- tools/testing/selftests/Makefile | 1 + tools/testing/selftests/sparc64/Makefile | 46 ++ tools/testing/selftests/sparc64/drivers/.gitignore | 1 + tools/testing/selftests/sparc64/drivers/Makefile | 15 + tools/testing/selftests/sparc64/drivers/adi-test.c | 721 +++++++++++++++++++++ .../selftests/sparc64/drivers/drivers_test.sh | 30 + tools/testing/selftests/sparc64/run.sh | 3 + 7 files changed, 817 insertions(+) create mode 100644 tools/testing/selftests/sparc64/Makefile create mode 100644 tools/testing/selftests/sparc64/drivers/.gitignore create mode 100644 tools/testing/selftests/sparc64/drivers/Makefile create mode 100644 tools/testing/selftests/sparc64/drivers/adi-test.c create mode 100755 tools/testing/selftests/sparc64/drivers/drivers_test.sh create mode 100755 tools/testing/selftests/sparc64/run.sh
diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index 7442dfb73b7f..94da632579e7 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -28,6 +28,7 @@ TARGETS += ptrace TARGETS += seccomp TARGETS += sigaltstack TARGETS += size +TARGETS += sparc64 TARGETS += splice TARGETS += static_keys TARGETS += sync diff --git a/tools/testing/selftests/sparc64/Makefile b/tools/testing/selftests/sparc64/Makefile new file mode 100644 index 000000000000..2082eeffd779 --- /dev/null +++ b/tools/testing/selftests/sparc64/Makefile @@ -0,0 +1,46 @@ +SUBDIRS := drivers + +TEST_PROGS := run.sh + +.PHONY: all clean + +include ../lib.mk + +all: + @for DIR in $(SUBDIRS); do \ + BUILD_TARGET=$(OUTPUT)/$$DIR; \ + mkdir $$BUILD_TARGET -p; \ + make OUTPUT=$$BUILD_TARGET -C $$DIR $@;\ + #SUBDIR test prog name should be in the form: SUBDIR_test.sh \ + TEST=$$DIR"_test.sh"; \ + if [ -e $$DIR/$$TEST ]; then \ + rsync -a $$DIR/$$TEST $$BUILD_TARGET/; \ + fi \ + done + +override define RUN_TESTS + @cd $(OUTPUT); ./run.sh +endef + +override define INSTALL_RULE + mkdir -p $(INSTALL_PATH) + install -t $(INSTALL_PATH) $(TEST_PROGS) $(TEST_PROGS_EXTENDED) $(TEST_FILES) + + @for SUBDIR in $(SUBDIRS); do \ + BUILD_TARGET=$(OUTPUT)/$$SUBDIR; \ + mkdir $$BUILD_TARGET -p; \ + $(MAKE) OUTPUT=$$BUILD_TARGET -C $$SUBDIR INSTALL_PATH=$(INSTALL_PATH)/$$SUBDIR install; \ + done; +endef + +override define EMIT_TESTS + echo "./run.sh" +endef + +override define CLEAN + @for DIR in $(SUBDIRS); do \ + BUILD_TARGET=$(OUTPUT)/$$DIR; \ + mkdir $$BUILD_TARGET -p; \ + make OUTPUT=$$BUILD_TARGET -C $$DIR $@;\ + done +endef diff --git a/tools/testing/selftests/sparc64/drivers/.gitignore b/tools/testing/selftests/sparc64/drivers/.gitignore new file mode 100644 index 000000000000..90e835ed74e6 --- /dev/null +++ b/tools/testing/selftests/sparc64/drivers/.gitignore @@ -0,0 +1 @@ +adi-test diff --git a/tools/testing/selftests/sparc64/drivers/Makefile b/tools/testing/selftests/sparc64/drivers/Makefile new file mode 100644 index 000000000000..6264f40bbdbc --- /dev/null +++ b/tools/testing/selftests/sparc64/drivers/Makefile @@ -0,0 +1,15 @@ + +INCLUDEDIR := -I. +CFLAGS := $(CFLAGS) $(INCLUDEDIR) -Wall -O2 -g + +TEST_GEN_FILES := adi-test + +all: $(TEST_GEN_FILES) + +$(TEST_GEN_FILES): adi-test.c + +TEST_PROGS := drivers_test.sh + +include ../../lib.mk + +$(OUTPUT)/adi-test: adi-test.c diff --git a/tools/testing/selftests/sparc64/drivers/adi-test.c b/tools/testing/selftests/sparc64/drivers/adi-test.c new file mode 100644 index 000000000000..95d93c6a88a5 --- /dev/null +++ b/tools/testing/selftests/sparc64/drivers/adi-test.c @@ -0,0 +1,721 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * selftest for sparc64's privileged ADI driver + * + * Author: Tom Hromatka tom.hromatka@oracle.com + */ +#include <linux/kernel.h> +#include <errno.h> +#include <fcntl.h> +#include <stdarg.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <sys/syscall.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <unistd.h> + +#include "../../kselftest.h" + +#define DEBUG_LEVEL_1_BIT (0x0001) +#define DEBUG_LEVEL_2_BIT (0x0002) +#define DEBUG_LEVEL_3_BIT (0x0004) +#define DEBUG_LEVEL_4_BIT (0x0008) +#define DEBUG_TIMING_BIT (0x1000) + +#ifndef ARRAY_SIZE +# define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) +#endif + +/* bit mask of enabled bits to print */ +#define DEBUG 0x0001 + +#define DEBUG_PRINT_L1(...) debug_print(DEBUG_LEVEL_1_BIT, __VA_ARGS__) +#define DEBUG_PRINT_L2(...) debug_print(DEBUG_LEVEL_2_BIT, __VA_ARGS__) +#define DEBUG_PRINT_L3(...) debug_print(DEBUG_LEVEL_3_BIT, __VA_ARGS__) +#define DEBUG_PRINT_L4(...) debug_print(DEBUG_LEVEL_4_BIT, __VA_ARGS__) +#define DEBUG_PRINT_T(...) debug_print(DEBUG_TIMING_BIT, __VA_ARGS__) + +static void debug_print(int level, const char *s, ...) +{ + va_list args; + + va_start(args, s); + + if (DEBUG & level) + vfprintf(stdout, s, args); + va_end(args); +} + +#ifndef min +#define min(x, y) ((x) < (y) ? x : y) +#endif + +#define RETURN_FROM_TEST(_ret) \ + do { \ + DEBUG_PRINT_L1( \ + "\tTest %s returned %d\n", __func__, _ret); \ + return _ret; \ + } while (0) + +#define ADI_BLKSZ 64 +#define ADI_MAX_VERSION 15 + +#define TEST_STEP_FAILURE(_ret) \ + do { \ + fprintf(stderr, "\tTest step failure: %d at %s:%d\n", \ + _ret, __func__, __LINE__); \ + goto out; \ + } while (0) + +#define RDTICK(_x) \ + asm volatile(" rd %%tick, %0\n" : "=r" (_x)) + +static int random_version(void) +{ + long tick; + + RDTICK(tick); + + return tick % (ADI_MAX_VERSION + 1); +} + +#define MAX_RANGES_SUPPORTED 5 +static const char system_ram_str[] = "System RAM\n"; +static int range_count; +static unsigned long long int start_addr[MAX_RANGES_SUPPORTED]; +static unsigned long long int end_addr[MAX_RANGES_SUPPORTED]; + +struct stats { + char name[16]; + unsigned long total; + unsigned long count; + unsigned long bytes; +}; + +static struct stats read_stats = { + .name = "read", .total = 0, .count = 0, .bytes = 0}; +static struct stats pread_stats = { + .name = "pread", .total = 0, .count = 0, .bytes = 0}; +static struct stats write_stats = { + .name = "write", .total = 0, .count = 0, .bytes = 0}; +static struct stats pwrite_stats = { + .name = "pwrite", .total = 0, .count = 0, .bytes = 0}; +static struct stats seek_stats = { + .name = "seek", .total = 0, .count = 0, .bytes = 0}; + +static void update_stats(struct stats * const ustats, + unsigned long measurement, unsigned long bytes) +{ + ustats->total += measurement; + ustats->bytes += bytes; + ustats->count++; +} + +static void print_ustats(const struct stats * const ustats) +{ + DEBUG_PRINT_L1("%s\t%7d\t%7.0f\t%7.0f\n", + ustats->name, ustats->count, + (float)ustats->total / (float)ustats->count, + (float)ustats->bytes / (float)ustats->count); +} + +static void print_stats(void) +{ + DEBUG_PRINT_L1("\nSyscall\tCall\tAvgTime\tAvgSize\n" + "\tCount\t(ticks)\t(bytes)\n" + "-------------------------------\n"); + + print_ustats(&read_stats); + print_ustats(&pread_stats); + print_ustats(&write_stats); + print_ustats(&pwrite_stats); + print_ustats(&seek_stats); +} + +static int build_memory_map(void) +{ + char line[256]; + FILE *fp; + int i; + + range_count = 0; + + fp = fopen("/proc/iomem", "r"); + if (!fp) { + fprintf(stderr, "/proc/iomem: error %d: %s\n", + errno, strerror(errno)); + return -errno; + } + + while (fgets(line, sizeof(line), fp) != 0) { + if (strstr(line, system_ram_str)) { + char *dash, *end_ptr; + + /* Given a line like this: + * d0400000-10ffaffff : System RAM + * replace the "-" with a space + */ + dash = strstr(line, "-"); + dash[0] = 0x20; + + start_addr[range_count] = strtoull(line, &end_ptr, 16); + end_addr[range_count] = strtoull(end_ptr, NULL, 16); + range_count++; + } + } + + fclose(fp); + + DEBUG_PRINT_L1("RAM Ranges\n"); + for (i = 0; i < range_count; i++) + DEBUG_PRINT_L1("\trange %d: 0x%llx\t- 0x%llx\n", + i, start_addr[i], end_addr[i]); + + if (range_count == 0) { + fprintf(stderr, "No valid address ranges found. Error.\n"); + return -1; + } + + return 0; +} + +static int read_adi(int fd, unsigned char *buf, int buf_sz) +{ + int ret, bytes_read = 0; + long start, end, elapsed_time = 0; + + do { + RDTICK(start); + ret = read(fd, buf + bytes_read, buf_sz - bytes_read); + RDTICK(end); + if (ret < 0) + return -errno; + + elapsed_time += end - start; + update_stats(&read_stats, elapsed_time, buf_sz); + bytes_read += ret; + + } while (bytes_read < buf_sz); + + DEBUG_PRINT_T("\tread elapsed timed = %ld\n", elapsed_time); + DEBUG_PRINT_L3("\tRead %d bytes\n", bytes_read); + + return bytes_read; +} + +static int pread_adi(int fd, unsigned char *buf, + int buf_sz, unsigned long offset) +{ + int ret, i, bytes_read = 0; + unsigned long cur_offset; + long start, end, elapsed_time = 0; + + cur_offset = offset; + do { + RDTICK(start); + ret = pread(fd, buf + bytes_read, buf_sz - bytes_read, + cur_offset); + RDTICK(end); + if (ret < 0) + return -errno; + + elapsed_time += end - start; + update_stats(&pread_stats, elapsed_time, buf_sz); + bytes_read += ret; + cur_offset += ret; + + } while (bytes_read < buf_sz); + + DEBUG_PRINT_T("\tpread elapsed timed = %ld\n", elapsed_time); + DEBUG_PRINT_L3("\tRead %d bytes starting at offset 0x%lx\n", + bytes_read, offset); + for (i = 0; i < bytes_read; i++) + DEBUG_PRINT_L4("\t\t0x%lx\t%d\n", offset + i, buf[i]); + + return bytes_read; +} + +static int write_adi(int fd, const unsigned char * const buf, int buf_sz) +{ + int ret, bytes_written = 0; + long start, end, elapsed_time = 0; + + do { + RDTICK(start); + ret = write(fd, buf + bytes_written, buf_sz - bytes_written); + RDTICK(end); + if (ret < 0) + return -errno; + + elapsed_time += (end - start); + update_stats(&write_stats, elapsed_time, buf_sz); + bytes_written += ret; + } while (bytes_written < buf_sz); + + DEBUG_PRINT_T("\twrite elapsed timed = %ld\n", elapsed_time); + DEBUG_PRINT_L3("\tWrote %d of %d bytes\n", bytes_written, buf_sz); + + return bytes_written; +} + +static int pwrite_adi(int fd, const unsigned char * const buf, + int buf_sz, unsigned long offset) +{ + int ret, bytes_written = 0; + unsigned long cur_offset; + long start, end, elapsed_time = 0; + + cur_offset = offset; + + do { + RDTICK(start); + ret = pwrite(fd, buf + bytes_written, + buf_sz - bytes_written, cur_offset); + RDTICK(end); + if (ret < 0) { + fprintf(stderr, "pwrite(): error %d: %s\n", + errno, strerror(errno)); + return -errno; + } + + elapsed_time += (end - start); + update_stats(&pwrite_stats, elapsed_time, buf_sz); + bytes_written += ret; + cur_offset += ret; + + } while (bytes_written < buf_sz); + + DEBUG_PRINT_T("\tpwrite elapsed timed = %ld\n", elapsed_time); + DEBUG_PRINT_L3("\tWrote %d of %d bytes starting at address 0x%lx\n", + bytes_written, buf_sz, offset); + + return bytes_written; +} + +static off_t seek_adi(int fd, off_t offset, int whence) +{ + long start, end; + off_t ret; + + RDTICK(start); + ret = lseek(fd, offset, whence); + RDTICK(end); + DEBUG_PRINT_L2("\tlseek ret = 0x%llx\n", ret); + if (ret < 0) + goto out; + + DEBUG_PRINT_T("\tlseek elapsed timed = %ld\n", end - start); + update_stats(&seek_stats, end - start, 0); + +out: + (void)lseek(fd, 0, SEEK_END); + return ret; +} + +static int test0_prpw_aligned_1byte(int fd) +{ + /* somewhat arbitrarily chosen address */ + unsigned long paddr = + (end_addr[range_count - 1] - 0x1000) & ~(ADI_BLKSZ - 1); + unsigned char version[1], expected_version; + loff_t offset; + int ret; + + version[0] = random_version(); + expected_version = version[0]; + + offset = paddr / ADI_BLKSZ; + + ret = pwrite_adi(fd, version, sizeof(version), offset); + if (ret != sizeof(version)) + TEST_STEP_FAILURE(ret); + + ret = pread_adi(fd, version, sizeof(version), offset); + if (ret != sizeof(version)) + TEST_STEP_FAILURE(ret); + + if (expected_version != version[0]) { + DEBUG_PRINT_L2("\tExpected version %d but read version %d\n", + expected_version, version[0]); + TEST_STEP_FAILURE(-expected_version); + } + + ret = 0; +out: + RETURN_FROM_TEST(ret); +} + +#define TEST1_VERSION_SZ 4096 +static int test1_prpw_aligned_4096bytes(int fd) +{ + /* somewhat arbitrarily chosen address */ + unsigned long paddr = + (end_addr[range_count - 1] - 0x6000) & ~(ADI_BLKSZ - 1); + unsigned char version[TEST1_VERSION_SZ], + expected_version[TEST1_VERSION_SZ]; + loff_t offset; + int ret, i; + + for (i = 0; i < TEST1_VERSION_SZ; i++) { + version[i] = random_version(); + expected_version[i] = version[i]; + } + + offset = paddr / ADI_BLKSZ; + + ret = pwrite_adi(fd, version, sizeof(version), offset); + if (ret != sizeof(version)) + TEST_STEP_FAILURE(ret); + + ret = pread_adi(fd, version, sizeof(version), offset); + if (ret != sizeof(version)) + TEST_STEP_FAILURE(ret); + + for (i = 0; i < TEST1_VERSION_SZ; i++) { + if (expected_version[i] != version[i]) { + DEBUG_PRINT_L2( + "\tExpected version %d but read version %d\n", + expected_version, version[0]); + TEST_STEP_FAILURE(-expected_version[i]); + } + } + + ret = 0; +out: + RETURN_FROM_TEST(ret); +} + +#define TEST2_VERSION_SZ 10327 +static int test2_prpw_aligned_10327bytes(int fd) +{ + /* somewhat arbitrarily chosen address */ + unsigned long paddr = + (start_addr[0] + 0x6000) & ~(ADI_BLKSZ - 1); + unsigned char version[TEST2_VERSION_SZ], + expected_version[TEST2_VERSION_SZ]; + loff_t offset; + int ret, i; + + for (i = 0; i < TEST2_VERSION_SZ; i++) { + version[i] = random_version(); + expected_version[i] = version[i]; + } + + offset = paddr / ADI_BLKSZ; + + ret = pwrite_adi(fd, version, sizeof(version), offset); + if (ret != sizeof(version)) + TEST_STEP_FAILURE(ret); + + ret = pread_adi(fd, version, sizeof(version), offset); + if (ret != sizeof(version)) + TEST_STEP_FAILURE(ret); + + for (i = 0; i < TEST2_VERSION_SZ; i++) { + if (expected_version[i] != version[i]) { + DEBUG_PRINT_L2( + "\tExpected version %d but read version %d\n", + expected_version, version[0]); + TEST_STEP_FAILURE(-expected_version[i]); + } + } + + ret = 0; +out: + RETURN_FROM_TEST(ret); +} + +#define TEST3_VERSION_SZ 12541 +static int test3_prpw_unaligned_12541bytes(int fd) +{ + /* somewhat arbitrarily chosen address */ + unsigned long paddr = + ((start_addr[0] + 0xC000) & ~(ADI_BLKSZ - 1)) + 17; + unsigned char version[TEST3_VERSION_SZ], + expected_version[TEST3_VERSION_SZ]; + loff_t offset; + int ret, i; + + for (i = 0; i < TEST3_VERSION_SZ; i++) { + version[i] = random_version(); + expected_version[i] = version[i]; + } + + offset = paddr / ADI_BLKSZ; + + ret = pwrite_adi(fd, version, sizeof(version), offset); + if (ret != sizeof(version)) + TEST_STEP_FAILURE(ret); + + ret = pread_adi(fd, version, sizeof(version), offset); + if (ret != sizeof(version)) + TEST_STEP_FAILURE(ret); + + for (i = 0; i < TEST3_VERSION_SZ; i++) { + if (expected_version[i] != version[i]) { + DEBUG_PRINT_L2( + "\tExpected version %d but read version %d\n", + expected_version, version[0]); + TEST_STEP_FAILURE(-expected_version[i]); + } + } + + ret = 0; +out: + RETURN_FROM_TEST(ret); +} + +static int test4_lseek(int fd) +{ +#define OFFSET_ADD (0x100) +#define OFFSET_SUBTRACT (0xFFFFFFF000000000) + + off_t offset_out, offset_in; + int ret; + + + offset_in = 0x123456789abcdef0; + offset_out = seek_adi(fd, offset_in, SEEK_SET); + if (offset_out != offset_in) { + ret = -1; + TEST_STEP_FAILURE(ret); + } + + /* seek to the current offset. this should return EINVAL */ + offset_out = seek_adi(fd, offset_in, SEEK_SET); + if (offset_out < 0 && errno == EINVAL) + DEBUG_PRINT_L2( + "\tSEEK_SET failed as designed. Not an error\n"); + else { + ret = -2; + TEST_STEP_FAILURE(ret); + } + + offset_out = seek_adi(fd, 0, SEEK_CUR); + if (offset_out != offset_in) { + ret = -3; + TEST_STEP_FAILURE(ret); + } + + offset_out = seek_adi(fd, OFFSET_ADD, SEEK_CUR); + if (offset_out != (offset_in + OFFSET_ADD)) { + ret = -4; + TEST_STEP_FAILURE(ret); + } + + offset_out = seek_adi(fd, OFFSET_SUBTRACT, SEEK_CUR); + if (offset_out != (offset_in + OFFSET_ADD + OFFSET_SUBTRACT)) { + ret = -5; + TEST_STEP_FAILURE(ret); + } + + ret = 0; +out: + RETURN_FROM_TEST(ret); +} + +static int test5_rw_aligned_1byte(int fd) +{ + /* somewhat arbitrarily chosen address */ + unsigned long paddr = + (end_addr[range_count - 1] - 0xF000) & ~(ADI_BLKSZ - 1); + unsigned char version, expected_version; + loff_t offset; + off_t oret; + int ret; + + offset = paddr / ADI_BLKSZ; + version = expected_version = random_version(); + + oret = seek_adi(fd, offset, SEEK_SET); + if (oret != offset) { + ret = -1; + TEST_STEP_FAILURE(ret); + } + + ret = write_adi(fd, &version, sizeof(version)); + if (ret != sizeof(version)) + TEST_STEP_FAILURE(ret); + + oret = seek_adi(fd, offset, SEEK_SET); + if (oret != offset) { + ret = -1; + TEST_STEP_FAILURE(ret); + } + + ret = read_adi(fd, &version, sizeof(version)); + if (ret != sizeof(version)) + TEST_STEP_FAILURE(ret); + + if (expected_version != version) { + DEBUG_PRINT_L2("\tExpected version %d but read version %d\n", + expected_version, version); + TEST_STEP_FAILURE(-expected_version); + } + + ret = 0; +out: + RETURN_FROM_TEST(ret); +} + +#define TEST6_VERSION_SZ 9434 +static int test6_rw_aligned_9434bytes(int fd) +{ + /* somewhat arbitrarily chosen address */ + unsigned long paddr = + (end_addr[range_count - 1] - 0x5F000) & ~(ADI_BLKSZ - 1); + unsigned char version[TEST6_VERSION_SZ], + expected_version[TEST6_VERSION_SZ]; + loff_t offset; + off_t oret; + int ret, i; + + offset = paddr / ADI_BLKSZ; + for (i = 0; i < TEST6_VERSION_SZ; i++) + version[i] = expected_version[i] = random_version(); + + oret = seek_adi(fd, offset, SEEK_SET); + if (oret != offset) { + ret = -1; + TEST_STEP_FAILURE(ret); + } + + ret = write_adi(fd, version, sizeof(version)); + if (ret != sizeof(version)) + TEST_STEP_FAILURE(ret); + + memset(version, 0, TEST6_VERSION_SZ); + + oret = seek_adi(fd, offset, SEEK_SET); + if (oret != offset) { + ret = -1; + TEST_STEP_FAILURE(ret); + } + + ret = read_adi(fd, version, sizeof(version)); + if (ret != sizeof(version)) + TEST_STEP_FAILURE(ret); + + for (i = 0; i < TEST6_VERSION_SZ; i++) { + if (expected_version[i] != version[i]) { + DEBUG_PRINT_L2( + "\tExpected version %d but read version %d\n", + expected_version[i], version[i]); + TEST_STEP_FAILURE(-expected_version[i]); + } + } + + ret = 0; +out: + RETURN_FROM_TEST(ret); +} + +#define TEST7_VERSION_SZ 14963 +static int test7_rw_aligned_14963bytes(int fd) +{ + /* somewhat arbitrarily chosen address */ + unsigned long paddr = + ((start_addr[range_count - 1] + 0xF000) & ~(ADI_BLKSZ - 1)) + 39; + unsigned char version[TEST7_VERSION_SZ], + expected_version[TEST7_VERSION_SZ]; + loff_t offset; + off_t oret; + int ret, i; + + offset = paddr / ADI_BLKSZ; + for (i = 0; i < TEST7_VERSION_SZ; i++) { + version[i] = random_version(); + expected_version[i] = version[i]; + } + + oret = seek_adi(fd, offset, SEEK_SET); + if (oret != offset) { + ret = -1; + TEST_STEP_FAILURE(ret); + } + + ret = write_adi(fd, version, sizeof(version)); + if (ret != sizeof(version)) + TEST_STEP_FAILURE(ret); + + memset(version, 0, TEST7_VERSION_SZ); + + oret = seek_adi(fd, offset, SEEK_SET); + if (oret != offset) { + ret = -1; + TEST_STEP_FAILURE(ret); + } + + ret = read_adi(fd, version, sizeof(version)); + if (ret != sizeof(version)) + TEST_STEP_FAILURE(ret); + + for (i = 0; i < TEST7_VERSION_SZ; i++) { + if (expected_version[i] != version[i]) { + DEBUG_PRINT_L2( + "\tExpected version %d but read version %d\n", + expected_version[i], version[i]); + TEST_STEP_FAILURE(-expected_version[i]); + } + + paddr += ADI_BLKSZ; + } + + ret = 0; +out: + RETURN_FROM_TEST(ret); +} + +static int (*tests[])(int fd) = { + test0_prpw_aligned_1byte, + test1_prpw_aligned_4096bytes, + test2_prpw_aligned_10327bytes, + test3_prpw_unaligned_12541bytes, + test4_lseek, + test5_rw_aligned_1byte, + test6_rw_aligned_9434bytes, + test7_rw_aligned_14963bytes, +}; +#define TEST_COUNT ARRAY_SIZE(tests) + +int main(int argc, char *argv[]) +{ + int fd, ret, test; + + ret = build_memory_map(); + if (ret < 0) + return ret; + + fd = open("/dev/adi", O_RDWR); + if (fd < 0) { + fprintf(stderr, "open: error %d: %s\n", + errno, strerror(errno)); + return -errno; + } + + for (test = 0; test < TEST_COUNT; test++) { + DEBUG_PRINT_L1("Running test #%d\n", test); + + ret = (*tests[test])(fd); + if (ret != 0) + ksft_test_result_fail("Test #%d failed: error %d\n", + test, ret); + else + ksft_test_result_pass("Test #%d passed\n", test); + } + + print_stats(); + close(fd); + + if (ksft_get_fail_cnt() > 0) + ksft_exit_fail(); + else + ksft_exit_pass(); + + /* it's impossible to get here, but the compiler throws a warning + * about control reaching the end of non-void function. bah. + */ + return 0; +} diff --git a/tools/testing/selftests/sparc64/drivers/drivers_test.sh b/tools/testing/selftests/sparc64/drivers/drivers_test.sh new file mode 100755 index 000000000000..6d08273b7532 --- /dev/null +++ b/tools/testing/selftests/sparc64/drivers/drivers_test.sh @@ -0,0 +1,30 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 + +SRC_TREE=../../../../ + +test_run() +{ + if [ -f ${SRC_TREE}/drivers/char/adi.ko ]; then + insmod ${SRC_TREE}/drivers/char/adi.ko 2> /dev/null + if [ $? -ne 0 ]; then + rc=1 + fi + else + # Use modprobe dry run to check for missing adi module + if ! /sbin/modprobe -q -n adi; then + echo "adi: [SKIP]" + elif /sbin/modprobe -q adi; then + echo "adi: ok" + else + echo "adi: [FAIL]" + rc=1 + fi + fi + ./adi-test + rmmod adi 2> /dev/null +} + +rc=0 +test_run +exit $rc diff --git a/tools/testing/selftests/sparc64/run.sh b/tools/testing/selftests/sparc64/run.sh new file mode 100755 index 000000000000..38ad61f9328e --- /dev/null +++ b/tools/testing/selftests/sparc64/run.sh @@ -0,0 +1,3 @@ +#!/bin/sh + +(cd drivers; ./drivers_test.sh)
On 04/23/2018 11:33 AM, Tom Hromatka wrote:
Add a selftest for the sparc64 privileged ADI driver. These tests verify the read(), pread(), write(), pwrite(), and seek() functionality of the driver. The tests also report simple performance statistics:
Syscall Call AvgTime AvgSize Count (ticks) (bytes) ------------------------------- read 3 119638 8133 pread 4 118164 6741 write 3 339442 8133 pwrite 4 280134 6741 seek 10 2919 0 Pass 8 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0Signed-off-by: Tom Hromatka tom.hromatka@oracle.com Reviewed-by: Allen Pais allen.pais@oracle.com
tools/testing/selftests/Makefile | 1 + tools/testing/selftests/sparc64/Makefile | 46 ++ tools/testing/selftests/sparc64/drivers/.gitignore | 1 + tools/testing/selftests/sparc64/drivers/Makefile | 15 + tools/testing/selftests/sparc64/drivers/adi-test.c | 721 +++++++++++++++++++++ .../selftests/sparc64/drivers/drivers_test.sh | 30 + tools/testing/selftests/sparc64/run.sh | 3 + 7 files changed, 817 insertions(+) create mode 100644 tools/testing/selftests/sparc64/Makefile create mode 100644 tools/testing/selftests/sparc64/drivers/.gitignore create mode 100644 tools/testing/selftests/sparc64/drivers/Makefile create mode 100644 tools/testing/selftests/sparc64/drivers/adi-test.c create mode 100755 tools/testing/selftests/sparc64/drivers/drivers_test.sh create mode 100755 tools/testing/selftests/sparc64/run.sh
diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index 7442dfb73b7f..94da632579e7 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -28,6 +28,7 @@ TARGETS += ptrace TARGETS += seccomp TARGETS += sigaltstack TARGETS += size +TARGETS += sparc64 TARGETS += splice TARGETS += static_keys TARGETS += sync diff --git a/tools/testing/selftests/sparc64/Makefile b/tools/testing/selftests/sparc64/Makefile new file mode 100644 index 000000000000..2082eeffd779 --- /dev/null +++ b/tools/testing/selftests/sparc64/Makefile @@ -0,0 +1,46 @@ +SUBDIRS := drivers
+TEST_PROGS := run.sh
+.PHONY: all clean
+include ../lib.mk
+all:
- @for DIR in $(SUBDIRS); do \
BUILD_TARGET=$(OUTPUT)/$$DIR; \mkdir $$BUILD_TARGET -p; \make OUTPUT=$$BUILD_TARGET -C $$DIR $@;\#SUBDIR test prog name should be in the form: SUBDIR_test.sh \TEST=$$DIR"_test.sh"; \if [ -e $$DIR/$$TEST ]; then \rsync -a $$DIR/$$TEST $$BUILD_TARGET/; \fi \- done
+override define RUN_TESTS
- @cd $(OUTPUT); ./run.sh
+endef
+override define INSTALL_RULE
- mkdir -p $(INSTALL_PATH)
- install -t $(INSTALL_PATH) $(TEST_PROGS) $(TEST_PROGS_EXTENDED) $(TEST_FILES)
- @for SUBDIR in $(SUBDIRS); do \
BUILD_TARGET=$(OUTPUT)/$$SUBDIR; \mkdir $$BUILD_TARGET -p; \$(MAKE) OUTPUT=$$BUILD_TARGET -C $$SUBDIR INSTALL_PATH=$(INSTALL_PATH)/$$SUBDIR install; \- done;
+endef
+override define EMIT_TESTS
- echo "./run.sh"
+endef
+override define CLEAN
- @for DIR in $(SUBDIRS); do \
BUILD_TARGET=$(OUTPUT)/$$DIR; \mkdir $$BUILD_TARGET -p; \make OUTPUT=$$BUILD_TARGET -C $$DIR $@;\- done
+endef diff --git a/tools/testing/selftests/sparc64/drivers/.gitignore b/tools/testing/selftests/sparc64/drivers/.gitignore new file mode 100644 index 000000000000..90e835ed74e6 --- /dev/null +++ b/tools/testing/selftests/sparc64/drivers/.gitignore @@ -0,0 +1 @@ +adi-test diff --git a/tools/testing/selftests/sparc64/drivers/Makefile b/tools/testing/selftests/sparc64/drivers/Makefile new file mode 100644 index 000000000000..6264f40bbdbc --- /dev/null +++ b/tools/testing/selftests/sparc64/drivers/Makefile @@ -0,0 +1,15 @@
+INCLUDEDIR := -I. +CFLAGS := $(CFLAGS) $(INCLUDEDIR) -Wall -O2 -g
+TEST_GEN_FILES := adi-test
+all: $(TEST_GEN_FILES)
+$(TEST_GEN_FILES): adi-test.c
+TEST_PROGS := drivers_test.sh
+include ../../lib.mk
+$(OUTPUT)/adi-test: adi-test.c diff --git a/tools/testing/selftests/sparc64/drivers/adi-test.c b/tools/testing/selftests/sparc64/drivers/adi-test.c new file mode 100644 index 000000000000..95d93c6a88a5 --- /dev/null +++ b/tools/testing/selftests/sparc64/drivers/adi-test.c @@ -0,0 +1,721 @@ +// SPDX-License-Identifier: GPL-2.0 +/*
- selftest for sparc64's privileged ADI driver
- Author: Tom Hromatka tom.hromatka@oracle.com
- */
+#include <linux/kernel.h> +#include <errno.h> +#include <fcntl.h> +#include <stdarg.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <sys/syscall.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <unistd.h>
+#include "../../kselftest.h"
+#define DEBUG_LEVEL_1_BIT (0x0001) +#define DEBUG_LEVEL_2_BIT (0x0002) +#define DEBUG_LEVEL_3_BIT (0x0004) +#define DEBUG_LEVEL_4_BIT (0x0008) +#define DEBUG_TIMING_BIT (0x1000)
+#ifndef ARRAY_SIZE +# define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) +#endif
+/* bit mask of enabled bits to print */ +#define DEBUG 0x0001
+#define DEBUG_PRINT_L1(...) debug_print(DEBUG_LEVEL_1_BIT, __VA_ARGS__) +#define DEBUG_PRINT_L2(...) debug_print(DEBUG_LEVEL_2_BIT, __VA_ARGS__) +#define DEBUG_PRINT_L3(...) debug_print(DEBUG_LEVEL_3_BIT, __VA_ARGS__) +#define DEBUG_PRINT_L4(...) debug_print(DEBUG_LEVEL_4_BIT, __VA_ARGS__) +#define DEBUG_PRINT_T(...) debug_print(DEBUG_TIMING_BIT, __VA_ARGS__)
+static void debug_print(int level, const char *s, ...) +{
- va_list args;
- va_start(args, s);
- if (DEBUG & level)
vfprintf(stdout, s, args);- va_end(args);
+}
+#ifndef min +#define min(x, y) ((x) < (y) ? x : y) +#endif
+#define RETURN_FROM_TEST(_ret) \
- do { \
DEBUG_PRINT_L1( \"\tTest %s returned %d\n", __func__, _ret); \return _ret; \- } while (0)
+#define ADI_BLKSZ 64 +#define ADI_MAX_VERSION 15
+#define TEST_STEP_FAILURE(_ret) \
- do { \
fprintf(stderr, "\tTest step failure: %d at %s:%d\n", \_ret, __func__, __LINE__); \goto out; \- } while (0)
+#define RDTICK(_x) \
- asm volatile(" rd %%tick, %0\n" : "=r" (_x))
+static int random_version(void) +{
- long tick;
- RDTICK(tick);
- return tick % (ADI_MAX_VERSION + 1);
+}
+#define MAX_RANGES_SUPPORTED 5 +static const char system_ram_str[] = "System RAM\n"; +static int range_count; +static unsigned long long int start_addr[MAX_RANGES_SUPPORTED]; +static unsigned long long int end_addr[MAX_RANGES_SUPPORTED];
+struct stats {
- char name[16];
- unsigned long total;
- unsigned long count;
- unsigned long bytes;
+};
+static struct stats read_stats = {
- .name = "read", .total = 0, .count = 0, .bytes = 0};
+static struct stats pread_stats = {
- .name = "pread", .total = 0, .count = 0, .bytes = 0};
+static struct stats write_stats = {
- .name = "write", .total = 0, .count = 0, .bytes = 0};
+static struct stats pwrite_stats = {
- .name = "pwrite", .total = 0, .count = 0, .bytes = 0};
+static struct stats seek_stats = {
- .name = "seek", .total = 0, .count = 0, .bytes = 0};
+static void update_stats(struct stats * const ustats,
unsigned long measurement, unsigned long bytes)+{
- ustats->total += measurement;
- ustats->bytes += bytes;
- ustats->count++;
+}
+static void print_ustats(const struct stats * const ustats) +{
- DEBUG_PRINT_L1("%s\t%7d\t%7.0f\t%7.0f\n",
ustats->name, ustats->count,(float)ustats->total / (float)ustats->count,(float)ustats->bytes / (float)ustats->count);+}
+static void print_stats(void) +{
- DEBUG_PRINT_L1("\nSyscall\tCall\tAvgTime\tAvgSize\n"
"\tCount\t(ticks)\t(bytes)\n""-------------------------------\n");- print_ustats(&read_stats);
- print_ustats(&pread_stats);
- print_ustats(&write_stats);
- print_ustats(&pwrite_stats);
- print_ustats(&seek_stats);
+}
+static int build_memory_map(void) +{
- char line[256];
- FILE *fp;
- int i;
- range_count = 0;
- fp = fopen("/proc/iomem", "r");
- if (!fp) {
fprintf(stderr, "/proc/iomem: error %d: %s\n",errno, strerror(errno));return -errno;- }
- while (fgets(line, sizeof(line), fp) != 0) {
if (strstr(line, system_ram_str)) {char *dash, *end_ptr;/* Given a line like this:* d0400000-10ffaffff : System RAM* replace the "-" with a space*/dash = strstr(line, "-");dash[0] = 0x20;start_addr[range_count] = strtoull(line, &end_ptr, 16);end_addr[range_count] = strtoull(end_ptr, NULL, 16);range_count++;}- }
- fclose(fp);
- DEBUG_PRINT_L1("RAM Ranges\n");
- for (i = 0; i < range_count; i++)
DEBUG_PRINT_L1("\trange %d: 0x%llx\t- 0x%llx\n",i, start_addr[i], end_addr[i]);- if (range_count == 0) {
fprintf(stderr, "No valid address ranges found. Error.\n");return -1;- }
- return 0;
+}
+static int read_adi(int fd, unsigned char *buf, int buf_sz) +{
- int ret, bytes_read = 0;
- long start, end, elapsed_time = 0;
- do {
RDTICK(start);ret = read(fd, buf + bytes_read, buf_sz - bytes_read);RDTICK(end);if (ret < 0)return -errno;elapsed_time += end - start;update_stats(&read_stats, elapsed_time, buf_sz);bytes_read += ret;- } while (bytes_read < buf_sz);
- DEBUG_PRINT_T("\tread elapsed timed = %ld\n", elapsed_time);
- DEBUG_PRINT_L3("\tRead %d bytes\n", bytes_read);
- return bytes_read;
+}
+static int pread_adi(int fd, unsigned char *buf,
int buf_sz, unsigned long offset)+{
- int ret, i, bytes_read = 0;
- unsigned long cur_offset;
- long start, end, elapsed_time = 0;
- cur_offset = offset;
- do {
RDTICK(start);ret = pread(fd, buf + bytes_read, buf_sz - bytes_read,cur_offset);RDTICK(end);if (ret < 0)return -errno;elapsed_time += end - start;update_stats(&pread_stats, elapsed_time, buf_sz);bytes_read += ret;cur_offset += ret;- } while (bytes_read < buf_sz);
- DEBUG_PRINT_T("\tpread elapsed timed = %ld\n", elapsed_time);
- DEBUG_PRINT_L3("\tRead %d bytes starting at offset 0x%lx\n",
bytes_read, offset);- for (i = 0; i < bytes_read; i++)
DEBUG_PRINT_L4("\t\t0x%lx\t%d\n", offset + i, buf[i]);- return bytes_read;
+}
+static int write_adi(int fd, const unsigned char * const buf, int buf_sz) +{
- int ret, bytes_written = 0;
- long start, end, elapsed_time = 0;
- do {
RDTICK(start);ret = write(fd, buf + bytes_written, buf_sz - bytes_written);RDTICK(end);if (ret < 0)return -errno;elapsed_time += (end - start);update_stats(&write_stats, elapsed_time, buf_sz);bytes_written += ret;- } while (bytes_written < buf_sz);
- DEBUG_PRINT_T("\twrite elapsed timed = %ld\n", elapsed_time);
- DEBUG_PRINT_L3("\tWrote %d of %d bytes\n", bytes_written, buf_sz);
- return bytes_written;
+}
+static int pwrite_adi(int fd, const unsigned char * const buf,
int buf_sz, unsigned long offset)+{
- int ret, bytes_written = 0;
- unsigned long cur_offset;
- long start, end, elapsed_time = 0;
- cur_offset = offset;
- do {
RDTICK(start);ret = pwrite(fd, buf + bytes_written,buf_sz - bytes_written, cur_offset);RDTICK(end);if (ret < 0) {fprintf(stderr, "pwrite(): error %d: %s\n",errno, strerror(errno));return -errno;}elapsed_time += (end - start);update_stats(&pwrite_stats, elapsed_time, buf_sz);bytes_written += ret;cur_offset += ret;- } while (bytes_written < buf_sz);
- DEBUG_PRINT_T("\tpwrite elapsed timed = %ld\n", elapsed_time);
- DEBUG_PRINT_L3("\tWrote %d of %d bytes starting at address 0x%lx\n",
bytes_written, buf_sz, offset);- return bytes_written;
+}
+static off_t seek_adi(int fd, off_t offset, int whence) +{
- long start, end;
- off_t ret;
- RDTICK(start);
- ret = lseek(fd, offset, whence);
- RDTICK(end);
- DEBUG_PRINT_L2("\tlseek ret = 0x%llx\n", ret);
- if (ret < 0)
goto out;- DEBUG_PRINT_T("\tlseek elapsed timed = %ld\n", end - start);
- update_stats(&seek_stats, end - start, 0);
+out:
- (void)lseek(fd, 0, SEEK_END);
- return ret;
+}
+static int test0_prpw_aligned_1byte(int fd) +{
- /* somewhat arbitrarily chosen address */
- unsigned long paddr =
(end_addr[range_count - 1] - 0x1000) & ~(ADI_BLKSZ - 1);- unsigned char version[1], expected_version;
- loff_t offset;
- int ret;
- version[0] = random_version();
- expected_version = version[0];
- offset = paddr / ADI_BLKSZ;
- ret = pwrite_adi(fd, version, sizeof(version), offset);
- if (ret != sizeof(version))
TEST_STEP_FAILURE(ret);- ret = pread_adi(fd, version, sizeof(version), offset);
- if (ret != sizeof(version))
TEST_STEP_FAILURE(ret);- if (expected_version != version[0]) {
DEBUG_PRINT_L2("\tExpected version %d but read version %d\n",expected_version, version[0]);TEST_STEP_FAILURE(-expected_version);- }
- ret = 0;
+out:
- RETURN_FROM_TEST(ret);
+}
+#define TEST1_VERSION_SZ 4096 +static int test1_prpw_aligned_4096bytes(int fd) +{
- /* somewhat arbitrarily chosen address */
- unsigned long paddr =
(end_addr[range_count - 1] - 0x6000) & ~(ADI_BLKSZ - 1);- unsigned char version[TEST1_VERSION_SZ],
expected_version[TEST1_VERSION_SZ];- loff_t offset;
- int ret, i;
- for (i = 0; i < TEST1_VERSION_SZ; i++) {
version[i] = random_version();expected_version[i] = version[i];- }
- offset = paddr / ADI_BLKSZ;
- ret = pwrite_adi(fd, version, sizeof(version), offset);
- if (ret != sizeof(version))
TEST_STEP_FAILURE(ret);- ret = pread_adi(fd, version, sizeof(version), offset);
- if (ret != sizeof(version))
TEST_STEP_FAILURE(ret);- for (i = 0; i < TEST1_VERSION_SZ; i++) {
if (expected_version[i] != version[i]) {DEBUG_PRINT_L2("\tExpected version %d but read version %d\n",expected_version, version[0]);TEST_STEP_FAILURE(-expected_version[i]);}- }
- ret = 0;
+out:
- RETURN_FROM_TEST(ret);
+}
+#define TEST2_VERSION_SZ 10327 +static int test2_prpw_aligned_10327bytes(int fd) +{
- /* somewhat arbitrarily chosen address */
- unsigned long paddr =
(start_addr[0] + 0x6000) & ~(ADI_BLKSZ - 1);- unsigned char version[TEST2_VERSION_SZ],
expected_version[TEST2_VERSION_SZ];- loff_t offset;
- int ret, i;
- for (i = 0; i < TEST2_VERSION_SZ; i++) {
version[i] = random_version();expected_version[i] = version[i];- }
- offset = paddr / ADI_BLKSZ;
- ret = pwrite_adi(fd, version, sizeof(version), offset);
- if (ret != sizeof(version))
TEST_STEP_FAILURE(ret);- ret = pread_adi(fd, version, sizeof(version), offset);
- if (ret != sizeof(version))
TEST_STEP_FAILURE(ret);- for (i = 0; i < TEST2_VERSION_SZ; i++) {
if (expected_version[i] != version[i]) {DEBUG_PRINT_L2("\tExpected version %d but read version %d\n",expected_version, version[0]);TEST_STEP_FAILURE(-expected_version[i]);}- }
- ret = 0;
+out:
- RETURN_FROM_TEST(ret);
+}
+#define TEST3_VERSION_SZ 12541 +static int test3_prpw_unaligned_12541bytes(int fd) +{
- /* somewhat arbitrarily chosen address */
- unsigned long paddr =
((start_addr[0] + 0xC000) & ~(ADI_BLKSZ - 1)) + 17;- unsigned char version[TEST3_VERSION_SZ],
expected_version[TEST3_VERSION_SZ];- loff_t offset;
- int ret, i;
- for (i = 0; i < TEST3_VERSION_SZ; i++) {
version[i] = random_version();expected_version[i] = version[i];- }
- offset = paddr / ADI_BLKSZ;
- ret = pwrite_adi(fd, version, sizeof(version), offset);
- if (ret != sizeof(version))
TEST_STEP_FAILURE(ret);- ret = pread_adi(fd, version, sizeof(version), offset);
- if (ret != sizeof(version))
TEST_STEP_FAILURE(ret);- for (i = 0; i < TEST3_VERSION_SZ; i++) {
if (expected_version[i] != version[i]) {DEBUG_PRINT_L2("\tExpected version %d but read version %d\n",expected_version, version[0]);TEST_STEP_FAILURE(-expected_version[i]);}- }
- ret = 0;
+out:
- RETURN_FROM_TEST(ret);
+}
+static int test4_lseek(int fd) +{ +#define OFFSET_ADD (0x100) +#define OFFSET_SUBTRACT (0xFFFFFFF000000000)
- off_t offset_out, offset_in;
- int ret;
- offset_in = 0x123456789abcdef0;
- offset_out = seek_adi(fd, offset_in, SEEK_SET);
- if (offset_out != offset_in) {
ret = -1;TEST_STEP_FAILURE(ret);- }
- /* seek to the current offset. this should return EINVAL */
- offset_out = seek_adi(fd, offset_in, SEEK_SET);
- if (offset_out < 0 && errno == EINVAL)
DEBUG_PRINT_L2("\tSEEK_SET failed as designed. Not an error\n");- else {
ret = -2;TEST_STEP_FAILURE(ret);- }
- offset_out = seek_adi(fd, 0, SEEK_CUR);
- if (offset_out != offset_in) {
ret = -3;TEST_STEP_FAILURE(ret);- }
- offset_out = seek_adi(fd, OFFSET_ADD, SEEK_CUR);
- if (offset_out != (offset_in + OFFSET_ADD)) {
ret = -4;TEST_STEP_FAILURE(ret);- }
- offset_out = seek_adi(fd, OFFSET_SUBTRACT, SEEK_CUR);
- if (offset_out != (offset_in + OFFSET_ADD + OFFSET_SUBTRACT)) {
ret = -5;TEST_STEP_FAILURE(ret);- }
- ret = 0;
+out:
- RETURN_FROM_TEST(ret);
+}
+static int test5_rw_aligned_1byte(int fd) +{
- /* somewhat arbitrarily chosen address */
- unsigned long paddr =
(end_addr[range_count - 1] - 0xF000) & ~(ADI_BLKSZ - 1);- unsigned char version, expected_version;
- loff_t offset;
- off_t oret;
- int ret;
- offset = paddr / ADI_BLKSZ;
- version = expected_version = random_version();
- oret = seek_adi(fd, offset, SEEK_SET);
- if (oret != offset) {
ret = -1;TEST_STEP_FAILURE(ret);- }
- ret = write_adi(fd, &version, sizeof(version));
- if (ret != sizeof(version))
TEST_STEP_FAILURE(ret);- oret = seek_adi(fd, offset, SEEK_SET);
- if (oret != offset) {
ret = -1;TEST_STEP_FAILURE(ret);- }
- ret = read_adi(fd, &version, sizeof(version));
- if (ret != sizeof(version))
TEST_STEP_FAILURE(ret);- if (expected_version != version) {
DEBUG_PRINT_L2("\tExpected version %d but read version %d\n",expected_version, version);TEST_STEP_FAILURE(-expected_version);- }
- ret = 0;
+out:
- RETURN_FROM_TEST(ret);
+}
+#define TEST6_VERSION_SZ 9434 +static int test6_rw_aligned_9434bytes(int fd) +{
- /* somewhat arbitrarily chosen address */
- unsigned long paddr =
(end_addr[range_count - 1] - 0x5F000) & ~(ADI_BLKSZ - 1);- unsigned char version[TEST6_VERSION_SZ],
expected_version[TEST6_VERSION_SZ];- loff_t offset;
- off_t oret;
- int ret, i;
- offset = paddr / ADI_BLKSZ;
- for (i = 0; i < TEST6_VERSION_SZ; i++)
version[i] = expected_version[i] = random_version();- oret = seek_adi(fd, offset, SEEK_SET);
- if (oret != offset) {
ret = -1;TEST_STEP_FAILURE(ret);- }
- ret = write_adi(fd, version, sizeof(version));
- if (ret != sizeof(version))
TEST_STEP_FAILURE(ret);- memset(version, 0, TEST6_VERSION_SZ);
- oret = seek_adi(fd, offset, SEEK_SET);
- if (oret != offset) {
ret = -1;TEST_STEP_FAILURE(ret);- }
- ret = read_adi(fd, version, sizeof(version));
- if (ret != sizeof(version))
TEST_STEP_FAILURE(ret);- for (i = 0; i < TEST6_VERSION_SZ; i++) {
if (expected_version[i] != version[i]) {DEBUG_PRINT_L2("\tExpected version %d but read version %d\n",expected_version[i], version[i]);TEST_STEP_FAILURE(-expected_version[i]);}- }
- ret = 0;
+out:
- RETURN_FROM_TEST(ret);
+}
+#define TEST7_VERSION_SZ 14963 +static int test7_rw_aligned_14963bytes(int fd) +{
- /* somewhat arbitrarily chosen address */
- unsigned long paddr =
((start_addr[range_count - 1] + 0xF000) & ~(ADI_BLKSZ - 1)) + 39;- unsigned char version[TEST7_VERSION_SZ],
expected_version[TEST7_VERSION_SZ];- loff_t offset;
- off_t oret;
- int ret, i;
- offset = paddr / ADI_BLKSZ;
- for (i = 0; i < TEST7_VERSION_SZ; i++) {
version[i] = random_version();expected_version[i] = version[i];- }
- oret = seek_adi(fd, offset, SEEK_SET);
- if (oret != offset) {
ret = -1;TEST_STEP_FAILURE(ret);- }
- ret = write_adi(fd, version, sizeof(version));
- if (ret != sizeof(version))
TEST_STEP_FAILURE(ret);- memset(version, 0, TEST7_VERSION_SZ);
- oret = seek_adi(fd, offset, SEEK_SET);
- if (oret != offset) {
ret = -1;TEST_STEP_FAILURE(ret);- }
- ret = read_adi(fd, version, sizeof(version));
- if (ret != sizeof(version))
TEST_STEP_FAILURE(ret);- for (i = 0; i < TEST7_VERSION_SZ; i++) {
if (expected_version[i] != version[i]) {DEBUG_PRINT_L2("\tExpected version %d but read version %d\n",expected_version[i], version[i]);TEST_STEP_FAILURE(-expected_version[i]);}paddr += ADI_BLKSZ;- }
- ret = 0;
+out:
- RETURN_FROM_TEST(ret);
+}
+static int (*tests[])(int fd) = {
- test0_prpw_aligned_1byte,
- test1_prpw_aligned_4096bytes,
- test2_prpw_aligned_10327bytes,
- test3_prpw_unaligned_12541bytes,
- test4_lseek,
- test5_rw_aligned_1byte,
- test6_rw_aligned_9434bytes,
- test7_rw_aligned_14963bytes,
+}; +#define TEST_COUNT ARRAY_SIZE(tests)
+int main(int argc, char *argv[]) +{
- int fd, ret, test;
- ret = build_memory_map();
- if (ret < 0)
return ret;- fd = open("/dev/adi", O_RDWR);
- if (fd < 0) {
fprintf(stderr, "open: error %d: %s\n",errno, strerror(errno));return -errno;- }
- for (test = 0; test < TEST_COUNT; test++) {
DEBUG_PRINT_L1("Running test #%d\n", test);ret = (*tests[test])(fd);if (ret != 0)ksft_test_result_fail("Test #%d failed: error %d\n",test, ret);elseksft_test_result_pass("Test #%d passed\n", test);- }
- print_stats();
- close(fd);
- if (ksft_get_fail_cnt() > 0)
ksft_exit_fail();- else
ksft_exit_pass();- /* it's impossible to get here, but the compiler throws a warning
* about control reaching the end of non-void function. bah.*/- return 0;
+} diff --git a/tools/testing/selftests/sparc64/drivers/drivers_test.sh b/tools/testing/selftests/sparc64/drivers/drivers_test.sh new file mode 100755 index 000000000000..6d08273b7532 --- /dev/null +++ b/tools/testing/selftests/sparc64/drivers/drivers_test.sh @@ -0,0 +1,30 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0
+SRC_TREE=../../../../
+test_run() +{
- if [ -f ${SRC_TREE}/drivers/char/adi.ko ]; then
insmod ${SRC_TREE}/drivers/char/adi.ko 2> /dev/nullif [ $? -ne 0 ]; thenrc=1fi- else
# Use modprobe dry run to check for missing adi moduleif ! /sbin/modprobe -q -n adi; thenecho "adi: [SKIP]"elif /sbin/modprobe -q adi; thenecho "adi: ok"elseecho "adi: [FAIL]"rc=1fi- fi
- ./adi-test
- rmmod adi 2> /dev/null
+}
+rc=0 +test_run +exit $rc diff --git a/tools/testing/selftests/sparc64/run.sh b/tools/testing/selftests/sparc64/run.sh new file mode 100755 index 000000000000..38ad61f9328e --- /dev/null +++ b/tools/testing/selftests/sparc64/run.sh @@ -0,0 +1,3 @@ +#!/bin/sh
+(cd drivers; ./drivers_test.sh)
Does this test need to be run as root? If so, a check for non-root run to skip test will be a good idea. This can be done later as a separate patch.
Assuming this patch is going through Sparc tree:
Reviewed-by: Shuah Khan (Samsung OSG) shuah@kernel.org
thanks, -- Shuah -- To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 04/23/2018 03:01 PM, Shuah Khan wrote:
On 04/23/2018 11:33 AM, Tom Hromatka wrote:
Add a selftest for the sparc64 privileged ADI driver. These tests verify the read(), pread(), write(), pwrite(), and seek() functionality of the driver. The tests also report simple performance statistics:
Syscall Call AvgTime AvgSize Count (ticks) (bytes) ------------------------------- read 3 119638 8133 pread 4 118164 6741 write 3 339442 8133 pwrite 4 280134 6741 seek 10 2919 0 Pass 8 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0Signed-off-by: Tom Hromatka tom.hromatka@oracle.com Reviewed-by: Allen Pais allen.pais@oracle.com
tools/testing/selftests/Makefile | 1 + tools/testing/selftests/sparc64/Makefile | 46 ++ tools/testing/selftests/sparc64/drivers/.gitignore | 1 + tools/testing/selftests/sparc64/drivers/Makefile | 15 + tools/testing/selftests/sparc64/drivers/adi-test.c | 721 +++++++++++++++++++++ .../selftests/sparc64/drivers/drivers_test.sh | 30 + tools/testing/selftests/sparc64/run.sh | 3 + 7 files changed, 817 insertions(+) create mode 100644 tools/testing/selftests/sparc64/Makefile create mode 100644 tools/testing/selftests/sparc64/drivers/.gitignore create mode 100644 tools/testing/selftests/sparc64/drivers/Makefile create mode 100644 tools/testing/selftests/sparc64/drivers/adi-test.c create mode 100755 tools/testing/selftests/sparc64/drivers/drivers_test.sh create mode 100755 tools/testing/selftests/sparc64/run.sh
diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index 7442dfb73b7f..94da632579e7 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -28,6 +28,7 @@ TARGETS += ptrace TARGETS += seccomp TARGETS += sigaltstack TARGETS += size +TARGETS += sparc64 TARGETS += splice TARGETS += static_keys TARGETS += sync diff --git a/tools/testing/selftests/sparc64/Makefile b/tools/testing/selftests/sparc64/Makefile new file mode 100644 index 000000000000..2082eeffd779 --- /dev/null +++ b/tools/testing/selftests/sparc64/Makefile @@ -0,0 +1,46 @@ +SUBDIRS := drivers
+TEST_PROGS := run.sh
+.PHONY: all clean
+include ../lib.mk
+all:
- @for DIR in $(SUBDIRS); do \
BUILD_TARGET=$(OUTPUT)/$$DIR; \mkdir $$BUILD_TARGET -p; \make OUTPUT=$$BUILD_TARGET -C $$DIR $@;\#SUBDIR test prog name should be in the form: SUBDIR_test.sh \TEST=$$DIR"_test.sh"; \if [ -e $$DIR/$$TEST ]; then \rsync -a $$DIR/$$TEST $$BUILD_TARGET/; \fi \- done
+override define RUN_TESTS
- @cd $(OUTPUT); ./run.sh
+endef
+override define INSTALL_RULE
- mkdir -p $(INSTALL_PATH)
- install -t $(INSTALL_PATH) $(TEST_PROGS) $(TEST_PROGS_EXTENDED) $(TEST_FILES)
- @for SUBDIR in $(SUBDIRS); do \
BUILD_TARGET=$(OUTPUT)/$$SUBDIR; \mkdir $$BUILD_TARGET -p; \$(MAKE) OUTPUT=$$BUILD_TARGET -C $$SUBDIR INSTALL_PATH=$(INSTALL_PATH)/$$SUBDIR install; \- done;
+endef
+override define EMIT_TESTS
- echo "./run.sh"
+endef
+override define CLEAN
- @for DIR in $(SUBDIRS); do \
BUILD_TARGET=$(OUTPUT)/$$DIR; \mkdir $$BUILD_TARGET -p; \make OUTPUT=$$BUILD_TARGET -C $$DIR $@;\- done
+endef diff --git a/tools/testing/selftests/sparc64/drivers/.gitignore b/tools/testing/selftests/sparc64/drivers/.gitignore new file mode 100644 index 000000000000..90e835ed74e6 --- /dev/null +++ b/tools/testing/selftests/sparc64/drivers/.gitignore @@ -0,0 +1 @@ +adi-test diff --git a/tools/testing/selftests/sparc64/drivers/Makefile b/tools/testing/selftests/sparc64/drivers/Makefile new file mode 100644 index 000000000000..6264f40bbdbc --- /dev/null +++ b/tools/testing/selftests/sparc64/drivers/Makefile @@ -0,0 +1,15 @@
+INCLUDEDIR := -I. +CFLAGS := $(CFLAGS) $(INCLUDEDIR) -Wall -O2 -g
+TEST_GEN_FILES := adi-test
+all: $(TEST_GEN_FILES)
+$(TEST_GEN_FILES): adi-test.c
+TEST_PROGS := drivers_test.sh
+include ../../lib.mk
+$(OUTPUT)/adi-test: adi-test.c diff --git a/tools/testing/selftests/sparc64/drivers/adi-test.c b/tools/testing/selftests/sparc64/drivers/adi-test.c new file mode 100644 index 000000000000..95d93c6a88a5 --- /dev/null +++ b/tools/testing/selftests/sparc64/drivers/adi-test.c @@ -0,0 +1,721 @@ +// SPDX-License-Identifier: GPL-2.0 +/*
- selftest for sparc64's privileged ADI driver
- Author: Tom Hromatka tom.hromatka@oracle.com
- */
+#include <linux/kernel.h> +#include <errno.h> +#include <fcntl.h> +#include <stdarg.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <sys/syscall.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <unistd.h>
+#include "../../kselftest.h"
+#define DEBUG_LEVEL_1_BIT (0x0001) +#define DEBUG_LEVEL_2_BIT (0x0002) +#define DEBUG_LEVEL_3_BIT (0x0004) +#define DEBUG_LEVEL_4_BIT (0x0008) +#define DEBUG_TIMING_BIT (0x1000)
+#ifndef ARRAY_SIZE +# define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) +#endif
+/* bit mask of enabled bits to print */ +#define DEBUG 0x0001
+#define DEBUG_PRINT_L1(...) debug_print(DEBUG_LEVEL_1_BIT, __VA_ARGS__) +#define DEBUG_PRINT_L2(...) debug_print(DEBUG_LEVEL_2_BIT, __VA_ARGS__) +#define DEBUG_PRINT_L3(...) debug_print(DEBUG_LEVEL_3_BIT, __VA_ARGS__) +#define DEBUG_PRINT_L4(...) debug_print(DEBUG_LEVEL_4_BIT, __VA_ARGS__) +#define DEBUG_PRINT_T(...) debug_print(DEBUG_TIMING_BIT, __VA_ARGS__)
+static void debug_print(int level, const char *s, ...) +{
- va_list args;
- va_start(args, s);
- if (DEBUG & level)
vfprintf(stdout, s, args);- va_end(args);
+}
+#ifndef min +#define min(x, y) ((x) < (y) ? x : y) +#endif
+#define RETURN_FROM_TEST(_ret) \
- do { \
DEBUG_PRINT_L1( \"\tTest %s returned %d\n", __func__, _ret); \return _ret; \- } while (0)
+#define ADI_BLKSZ 64 +#define ADI_MAX_VERSION 15
+#define TEST_STEP_FAILURE(_ret) \
- do { \
fprintf(stderr, "\tTest step failure: %d at %s:%d\n", \_ret, __func__, __LINE__); \goto out; \- } while (0)
+#define RDTICK(_x) \
- asm volatile(" rd %%tick, %0\n" : "=r" (_x))
+static int random_version(void) +{
- long tick;
- RDTICK(tick);
- return tick % (ADI_MAX_VERSION + 1);
+}
+#define MAX_RANGES_SUPPORTED 5 +static const char system_ram_str[] = "System RAM\n"; +static int range_count; +static unsigned long long int start_addr[MAX_RANGES_SUPPORTED]; +static unsigned long long int end_addr[MAX_RANGES_SUPPORTED];
+struct stats {
- char name[16];
- unsigned long total;
- unsigned long count;
- unsigned long bytes;
+};
+static struct stats read_stats = {
- .name = "read", .total = 0, .count = 0, .bytes = 0};
+static struct stats pread_stats = {
- .name = "pread", .total = 0, .count = 0, .bytes = 0};
+static struct stats write_stats = {
- .name = "write", .total = 0, .count = 0, .bytes = 0};
+static struct stats pwrite_stats = {
- .name = "pwrite", .total = 0, .count = 0, .bytes = 0};
+static struct stats seek_stats = {
- .name = "seek", .total = 0, .count = 0, .bytes = 0};
+static void update_stats(struct stats * const ustats,
unsigned long measurement, unsigned long bytes)+{
- ustats->total += measurement;
- ustats->bytes += bytes;
- ustats->count++;
+}
+static void print_ustats(const struct stats * const ustats) +{
- DEBUG_PRINT_L1("%s\t%7d\t%7.0f\t%7.0f\n",
ustats->name, ustats->count,(float)ustats->total / (float)ustats->count,(float)ustats->bytes / (float)ustats->count);+}
+static void print_stats(void) +{
- DEBUG_PRINT_L1("\nSyscall\tCall\tAvgTime\tAvgSize\n"
"\tCount\t(ticks)\t(bytes)\n""-------------------------------\n");- print_ustats(&read_stats);
- print_ustats(&pread_stats);
- print_ustats(&write_stats);
- print_ustats(&pwrite_stats);
- print_ustats(&seek_stats);
+}
+static int build_memory_map(void) +{
- char line[256];
- FILE *fp;
- int i;
- range_count = 0;
- fp = fopen("/proc/iomem", "r");
- if (!fp) {
fprintf(stderr, "/proc/iomem: error %d: %s\n",errno, strerror(errno));return -errno;- }
- while (fgets(line, sizeof(line), fp) != 0) {
if (strstr(line, system_ram_str)) {char *dash, *end_ptr;/* Given a line like this:* d0400000-10ffaffff : System RAM* replace the "-" with a space*/dash = strstr(line, "-");dash[0] = 0x20;start_addr[range_count] = strtoull(line, &end_ptr, 16);end_addr[range_count] = strtoull(end_ptr, NULL, 16);range_count++;}- }
- fclose(fp);
- DEBUG_PRINT_L1("RAM Ranges\n");
- for (i = 0; i < range_count; i++)
DEBUG_PRINT_L1("\trange %d: 0x%llx\t- 0x%llx\n",i, start_addr[i], end_addr[i]);- if (range_count == 0) {
fprintf(stderr, "No valid address ranges found. Error.\n");return -1;- }
- return 0;
+}
+static int read_adi(int fd, unsigned char *buf, int buf_sz) +{
- int ret, bytes_read = 0;
- long start, end, elapsed_time = 0;
- do {
RDTICK(start);ret = read(fd, buf + bytes_read, buf_sz - bytes_read);RDTICK(end);if (ret < 0)return -errno;elapsed_time += end - start;update_stats(&read_stats, elapsed_time, buf_sz);bytes_read += ret;- } while (bytes_read < buf_sz);
- DEBUG_PRINT_T("\tread elapsed timed = %ld\n", elapsed_time);
- DEBUG_PRINT_L3("\tRead %d bytes\n", bytes_read);
- return bytes_read;
+}
+static int pread_adi(int fd, unsigned char *buf,
int buf_sz, unsigned long offset)+{
- int ret, i, bytes_read = 0;
- unsigned long cur_offset;
- long start, end, elapsed_time = 0;
- cur_offset = offset;
- do {
RDTICK(start);ret = pread(fd, buf + bytes_read, buf_sz - bytes_read,cur_offset);RDTICK(end);if (ret < 0)return -errno;elapsed_time += end - start;update_stats(&pread_stats, elapsed_time, buf_sz);bytes_read += ret;cur_offset += ret;- } while (bytes_read < buf_sz);
- DEBUG_PRINT_T("\tpread elapsed timed = %ld\n", elapsed_time);
- DEBUG_PRINT_L3("\tRead %d bytes starting at offset 0x%lx\n",
bytes_read, offset);- for (i = 0; i < bytes_read; i++)
DEBUG_PRINT_L4("\t\t0x%lx\t%d\n", offset + i, buf[i]);- return bytes_read;
+}
+static int write_adi(int fd, const unsigned char * const buf, int buf_sz) +{
- int ret, bytes_written = 0;
- long start, end, elapsed_time = 0;
- do {
RDTICK(start);ret = write(fd, buf + bytes_written, buf_sz - bytes_written);RDTICK(end);if (ret < 0)return -errno;elapsed_time += (end - start);update_stats(&write_stats, elapsed_time, buf_sz);bytes_written += ret;- } while (bytes_written < buf_sz);
- DEBUG_PRINT_T("\twrite elapsed timed = %ld\n", elapsed_time);
- DEBUG_PRINT_L3("\tWrote %d of %d bytes\n", bytes_written, buf_sz);
- return bytes_written;
+}
+static int pwrite_adi(int fd, const unsigned char * const buf,
int buf_sz, unsigned long offset)+{
- int ret, bytes_written = 0;
- unsigned long cur_offset;
- long start, end, elapsed_time = 0;
- cur_offset = offset;
- do {
RDTICK(start);ret = pwrite(fd, buf + bytes_written,buf_sz - bytes_written, cur_offset);RDTICK(end);if (ret < 0) {fprintf(stderr, "pwrite(): error %d: %s\n",errno, strerror(errno));return -errno;}elapsed_time += (end - start);update_stats(&pwrite_stats, elapsed_time, buf_sz);bytes_written += ret;cur_offset += ret;- } while (bytes_written < buf_sz);
- DEBUG_PRINT_T("\tpwrite elapsed timed = %ld\n", elapsed_time);
- DEBUG_PRINT_L3("\tWrote %d of %d bytes starting at address 0x%lx\n",
bytes_written, buf_sz, offset);- return bytes_written;
+}
+static off_t seek_adi(int fd, off_t offset, int whence) +{
- long start, end;
- off_t ret;
- RDTICK(start);
- ret = lseek(fd, offset, whence);
- RDTICK(end);
- DEBUG_PRINT_L2("\tlseek ret = 0x%llx\n", ret);
- if (ret < 0)
goto out;- DEBUG_PRINT_T("\tlseek elapsed timed = %ld\n", end - start);
- update_stats(&seek_stats, end - start, 0);
+out:
- (void)lseek(fd, 0, SEEK_END);
- return ret;
+}
+static int test0_prpw_aligned_1byte(int fd) +{
- /* somewhat arbitrarily chosen address */
- unsigned long paddr =
(end_addr[range_count - 1] - 0x1000) & ~(ADI_BLKSZ - 1);- unsigned char version[1], expected_version;
- loff_t offset;
- int ret;
- version[0] = random_version();
- expected_version = version[0];
- offset = paddr / ADI_BLKSZ;
- ret = pwrite_adi(fd, version, sizeof(version), offset);
- if (ret != sizeof(version))
TEST_STEP_FAILURE(ret);- ret = pread_adi(fd, version, sizeof(version), offset);
- if (ret != sizeof(version))
TEST_STEP_FAILURE(ret);- if (expected_version != version[0]) {
DEBUG_PRINT_L2("\tExpected version %d but read version %d\n",expected_version, version[0]);TEST_STEP_FAILURE(-expected_version);- }
- ret = 0;
+out:
- RETURN_FROM_TEST(ret);
+}
+#define TEST1_VERSION_SZ 4096 +static int test1_prpw_aligned_4096bytes(int fd) +{
- /* somewhat arbitrarily chosen address */
- unsigned long paddr =
(end_addr[range_count - 1] - 0x6000) & ~(ADI_BLKSZ - 1);- unsigned char version[TEST1_VERSION_SZ],
expected_version[TEST1_VERSION_SZ];- loff_t offset;
- int ret, i;
- for (i = 0; i < TEST1_VERSION_SZ; i++) {
version[i] = random_version();expected_version[i] = version[i];- }
- offset = paddr / ADI_BLKSZ;
- ret = pwrite_adi(fd, version, sizeof(version), offset);
- if (ret != sizeof(version))
TEST_STEP_FAILURE(ret);- ret = pread_adi(fd, version, sizeof(version), offset);
- if (ret != sizeof(version))
TEST_STEP_FAILURE(ret);- for (i = 0; i < TEST1_VERSION_SZ; i++) {
if (expected_version[i] != version[i]) {DEBUG_PRINT_L2("\tExpected version %d but read version %d\n",expected_version, version[0]);TEST_STEP_FAILURE(-expected_version[i]);}- }
- ret = 0;
+out:
- RETURN_FROM_TEST(ret);
+}
+#define TEST2_VERSION_SZ 10327 +static int test2_prpw_aligned_10327bytes(int fd) +{
- /* somewhat arbitrarily chosen address */
- unsigned long paddr =
(start_addr[0] + 0x6000) & ~(ADI_BLKSZ - 1);- unsigned char version[TEST2_VERSION_SZ],
expected_version[TEST2_VERSION_SZ];- loff_t offset;
- int ret, i;
- for (i = 0; i < TEST2_VERSION_SZ; i++) {
version[i] = random_version();expected_version[i] = version[i];- }
- offset = paddr / ADI_BLKSZ;
- ret = pwrite_adi(fd, version, sizeof(version), offset);
- if (ret != sizeof(version))
TEST_STEP_FAILURE(ret);- ret = pread_adi(fd, version, sizeof(version), offset);
- if (ret != sizeof(version))
TEST_STEP_FAILURE(ret);- for (i = 0; i < TEST2_VERSION_SZ; i++) {
if (expected_version[i] != version[i]) {DEBUG_PRINT_L2("\tExpected version %d but read version %d\n",expected_version, version[0]);TEST_STEP_FAILURE(-expected_version[i]);}- }
- ret = 0;
+out:
- RETURN_FROM_TEST(ret);
+}
+#define TEST3_VERSION_SZ 12541 +static int test3_prpw_unaligned_12541bytes(int fd) +{
- /* somewhat arbitrarily chosen address */
- unsigned long paddr =
((start_addr[0] + 0xC000) & ~(ADI_BLKSZ - 1)) + 17;- unsigned char version[TEST3_VERSION_SZ],
expected_version[TEST3_VERSION_SZ];- loff_t offset;
- int ret, i;
- for (i = 0; i < TEST3_VERSION_SZ; i++) {
version[i] = random_version();expected_version[i] = version[i];- }
- offset = paddr / ADI_BLKSZ;
- ret = pwrite_adi(fd, version, sizeof(version), offset);
- if (ret != sizeof(version))
TEST_STEP_FAILURE(ret);- ret = pread_adi(fd, version, sizeof(version), offset);
- if (ret != sizeof(version))
TEST_STEP_FAILURE(ret);- for (i = 0; i < TEST3_VERSION_SZ; i++) {
if (expected_version[i] != version[i]) {DEBUG_PRINT_L2("\tExpected version %d but read version %d\n",expected_version, version[0]);TEST_STEP_FAILURE(-expected_version[i]);}- }
- ret = 0;
+out:
- RETURN_FROM_TEST(ret);
+}
+static int test4_lseek(int fd) +{ +#define OFFSET_ADD (0x100) +#define OFFSET_SUBTRACT (0xFFFFFFF000000000)
- off_t offset_out, offset_in;
- int ret;
- offset_in = 0x123456789abcdef0;
- offset_out = seek_adi(fd, offset_in, SEEK_SET);
- if (offset_out != offset_in) {
ret = -1;TEST_STEP_FAILURE(ret);- }
- /* seek to the current offset. this should return EINVAL */
- offset_out = seek_adi(fd, offset_in, SEEK_SET);
- if (offset_out < 0 && errno == EINVAL)
DEBUG_PRINT_L2("\tSEEK_SET failed as designed. Not an error\n");- else {
ret = -2;TEST_STEP_FAILURE(ret);- }
- offset_out = seek_adi(fd, 0, SEEK_CUR);
- if (offset_out != offset_in) {
ret = -3;TEST_STEP_FAILURE(ret);- }
- offset_out = seek_adi(fd, OFFSET_ADD, SEEK_CUR);
- if (offset_out != (offset_in + OFFSET_ADD)) {
ret = -4;TEST_STEP_FAILURE(ret);- }
- offset_out = seek_adi(fd, OFFSET_SUBTRACT, SEEK_CUR);
- if (offset_out != (offset_in + OFFSET_ADD + OFFSET_SUBTRACT)) {
ret = -5;TEST_STEP_FAILURE(ret);- }
- ret = 0;
+out:
- RETURN_FROM_TEST(ret);
+}
+static int test5_rw_aligned_1byte(int fd) +{
- /* somewhat arbitrarily chosen address */
- unsigned long paddr =
(end_addr[range_count - 1] - 0xF000) & ~(ADI_BLKSZ - 1);- unsigned char version, expected_version;
- loff_t offset;
- off_t oret;
- int ret;
- offset = paddr / ADI_BLKSZ;
- version = expected_version = random_version();
- oret = seek_adi(fd, offset, SEEK_SET);
- if (oret != offset) {
ret = -1;TEST_STEP_FAILURE(ret);- }
- ret = write_adi(fd, &version, sizeof(version));
- if (ret != sizeof(version))
TEST_STEP_FAILURE(ret);- oret = seek_adi(fd, offset, SEEK_SET);
- if (oret != offset) {
ret = -1;TEST_STEP_FAILURE(ret);- }
- ret = read_adi(fd, &version, sizeof(version));
- if (ret != sizeof(version))
TEST_STEP_FAILURE(ret);- if (expected_version != version) {
DEBUG_PRINT_L2("\tExpected version %d but read version %d\n",expected_version, version);TEST_STEP_FAILURE(-expected_version);- }
- ret = 0;
+out:
- RETURN_FROM_TEST(ret);
+}
+#define TEST6_VERSION_SZ 9434 +static int test6_rw_aligned_9434bytes(int fd) +{
- /* somewhat arbitrarily chosen address */
- unsigned long paddr =
(end_addr[range_count - 1] - 0x5F000) & ~(ADI_BLKSZ - 1);- unsigned char version[TEST6_VERSION_SZ],
expected_version[TEST6_VERSION_SZ];- loff_t offset;
- off_t oret;
- int ret, i;
- offset = paddr / ADI_BLKSZ;
- for (i = 0; i < TEST6_VERSION_SZ; i++)
version[i] = expected_version[i] = random_version();- oret = seek_adi(fd, offset, SEEK_SET);
- if (oret != offset) {
ret = -1;TEST_STEP_FAILURE(ret);- }
- ret = write_adi(fd, version, sizeof(version));
- if (ret != sizeof(version))
TEST_STEP_FAILURE(ret);- memset(version, 0, TEST6_VERSION_SZ);
- oret = seek_adi(fd, offset, SEEK_SET);
- if (oret != offset) {
ret = -1;TEST_STEP_FAILURE(ret);- }
- ret = read_adi(fd, version, sizeof(version));
- if (ret != sizeof(version))
TEST_STEP_FAILURE(ret);- for (i = 0; i < TEST6_VERSION_SZ; i++) {
if (expected_version[i] != version[i]) {DEBUG_PRINT_L2("\tExpected version %d but read version %d\n",expected_version[i], version[i]);TEST_STEP_FAILURE(-expected_version[i]);}- }
- ret = 0;
+out:
- RETURN_FROM_TEST(ret);
+}
+#define TEST7_VERSION_SZ 14963 +static int test7_rw_aligned_14963bytes(int fd) +{
- /* somewhat arbitrarily chosen address */
- unsigned long paddr =
((start_addr[range_count - 1] + 0xF000) & ~(ADI_BLKSZ - 1)) + 39;- unsigned char version[TEST7_VERSION_SZ],
expected_version[TEST7_VERSION_SZ];- loff_t offset;
- off_t oret;
- int ret, i;
- offset = paddr / ADI_BLKSZ;
- for (i = 0; i < TEST7_VERSION_SZ; i++) {
version[i] = random_version();expected_version[i] = version[i];- }
- oret = seek_adi(fd, offset, SEEK_SET);
- if (oret != offset) {
ret = -1;TEST_STEP_FAILURE(ret);- }
- ret = write_adi(fd, version, sizeof(version));
- if (ret != sizeof(version))
TEST_STEP_FAILURE(ret);- memset(version, 0, TEST7_VERSION_SZ);
- oret = seek_adi(fd, offset, SEEK_SET);
- if (oret != offset) {
ret = -1;TEST_STEP_FAILURE(ret);- }
- ret = read_adi(fd, version, sizeof(version));
- if (ret != sizeof(version))
TEST_STEP_FAILURE(ret);- for (i = 0; i < TEST7_VERSION_SZ; i++) {
if (expected_version[i] != version[i]) {DEBUG_PRINT_L2("\tExpected version %d but read version %d\n",expected_version[i], version[i]);TEST_STEP_FAILURE(-expected_version[i]);}paddr += ADI_BLKSZ;- }
- ret = 0;
+out:
- RETURN_FROM_TEST(ret);
+}
+static int (*tests[])(int fd) = {
- test0_prpw_aligned_1byte,
- test1_prpw_aligned_4096bytes,
- test2_prpw_aligned_10327bytes,
- test3_prpw_unaligned_12541bytes,
- test4_lseek,
- test5_rw_aligned_1byte,
- test6_rw_aligned_9434bytes,
- test7_rw_aligned_14963bytes,
+}; +#define TEST_COUNT ARRAY_SIZE(tests)
+int main(int argc, char *argv[]) +{
- int fd, ret, test;
- ret = build_memory_map();
- if (ret < 0)
return ret;- fd = open("/dev/adi", O_RDWR);
- if (fd < 0) {
fprintf(stderr, "open: error %d: %s\n",errno, strerror(errno));return -errno;- }
- for (test = 0; test < TEST_COUNT; test++) {
DEBUG_PRINT_L1("Running test #%d\n", test);ret = (*tests[test])(fd);if (ret != 0)ksft_test_result_fail("Test #%d failed: error %d\n",test, ret);elseksft_test_result_pass("Test #%d passed\n", test);- }
- print_stats();
- close(fd);
- if (ksft_get_fail_cnt() > 0)
ksft_exit_fail();- else
ksft_exit_pass();- /* it's impossible to get here, but the compiler throws a warning
* about control reaching the end of non-void function. bah.*/- return 0;
+} diff --git a/tools/testing/selftests/sparc64/drivers/drivers_test.sh b/tools/testing/selftests/sparc64/drivers/drivers_test.sh new file mode 100755 index 000000000000..6d08273b7532 --- /dev/null +++ b/tools/testing/selftests/sparc64/drivers/drivers_test.sh @@ -0,0 +1,30 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0
+SRC_TREE=../../../../
+test_run() +{
- if [ -f ${SRC_TREE}/drivers/char/adi.ko ]; then
insmod ${SRC_TREE}/drivers/char/adi.ko 2> /dev/nullif [ $? -ne 0 ]; thenrc=1fi- else
# Use modprobe dry run to check for missing adi moduleif ! /sbin/modprobe -q -n adi; thenecho "adi: [SKIP]"elif /sbin/modprobe -q adi; thenecho "adi: ok"elseecho "adi: [FAIL]"rc=1fi- fi
- ./adi-test
- rmmod adi 2> /dev/null
+}
+rc=0 +test_run +exit $rc diff --git a/tools/testing/selftests/sparc64/run.sh b/tools/testing/selftests/sparc64/run.sh new file mode 100755 index 000000000000..38ad61f9328e --- /dev/null +++ b/tools/testing/selftests/sparc64/run.sh @@ -0,0 +1,3 @@ +#!/bin/sh
+(cd drivers; ./drivers_test.sh)
Does this test need to be run as root? If so, a check for non-root run to skip test will be a good idea. This can be done later as a separate patch.
Yes, good catch. Thank you.
Assuming this patch is going through Sparc tree:
Reviewed-by: Shuah Khan (Samsung OSG) shuah@kernel.org
Awesome! Thanks so much for your help.
Regards.
Tom
thanks, -- Shuah
-- To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
linux-kselftest-mirror@lists.linaro.org
-
Greg KH -
Shuah Khan -
Tom Hromatka