Introduce a new netlink attribute 'actor_port_prio' to allow setting the LACP actor port priority on a per-slave basis. This extends the existing bonding infrastructure to support more granular control over LACP negotiations.

The priority value is embedded in LACPDU packets and will be used by subsequent patches to influence aggregator selection policies.

Signed-off-by: Hangbin Liu liuhangbin@gmail.com --- Documentation/networking/bonding.rst | 9 +++++++ drivers/net/bonding/bond_3ad.c | 4 ++++ drivers/net/bonding/bond_netlink.c | 16 +++++++++++++ drivers/net/bonding/bond_options.c | 36 ++++++++++++++++++++++++++++ include/net/bond_3ad.h | 1 + include/net/bond_options.h | 1 + include/uapi/linux/if_link.h | 1 + 7 files changed, 68 insertions(+)

diff --git a/Documentation/networking/bonding.rst b/Documentation/networking/bonding.rst index f8f5766703d4..1ca7830c24ea 100644 --- a/Documentation/networking/bonding.rst +++ b/Documentation/networking/bonding.rst @@ -193,6 +193,15 @@ ad_actor_sys_prio This parameter has effect only in 802.3ad mode and is available through SysFs interface.

+actor_port_prio + + In an AD system, this specifies the port priority. The allowed range + is 1 - 65535. If the value is not specified, it takes 255 as the + default value. + + This parameter has effect only in 802.3ad mode and is available through + netlink interface. + ad_actor_system

In an AD system, this specifies the mac-address for the actor in diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c index 4edc8e6b6b64..67ca78923b04 100644 --- a/drivers/net/bonding/bond_3ad.c +++ b/drivers/net/bonding/bond_3ad.c @@ -436,6 +436,7 @@ static void __ad_actor_update_port(struct port *port)

port->actor_system = BOND_AD_INFO(bond).system.sys_mac_addr; port->actor_system_priority = BOND_AD_INFO(bond).system.sys_priority; + port->actor_port_priority = SLAVE_AD_INFO(port->slave)->port_priority; }

/* Conversions */ @@ -2209,6 +2210,9 @@ void bond_3ad_bind_slave(struct slave *slave)

ad_initialize_port(port, &bond->params);

+ /* Port priority is initialized. Update it to slave's ad info */ + SLAVE_AD_INFO(slave)->port_priority = port->actor_port_priority; + port->slave = slave; port->actor_port_number = SLAVE_AD_INFO(slave)->id; /* key is determined according to the link speed, duplex and diff --git a/drivers/net/bonding/bond_netlink.c b/drivers/net/bonding/bond_netlink.c index 57fff2421f1b..16ef13ddcf22 100644 --- a/drivers/net/bonding/bond_netlink.c +++ b/drivers/net/bonding/bond_netlink.c @@ -28,6 +28,7 @@ static size_t bond_get_slave_size(const struct net_device *bond_dev, nla_total_size(sizeof(u8)) + /* IFLA_BOND_SLAVE_AD_ACTOR_OPER_PORT_STATE */ nla_total_size(sizeof(u16)) + /* IFLA_BOND_SLAVE_AD_PARTNER_OPER_PORT_STATE */ nla_total_size(sizeof(s32)) + /* IFLA_BOND_SLAVE_PRIO */ + nla_total_size(sizeof(u16)) + /* IFLA_BOND_SLAVE_ACTOR_PORT_PRIO */ 0; }

@@ -77,6 +78,10 @@ static int bond_fill_slave_info(struct sk_buff *skb, ad_port->partner_oper.port_state)) goto nla_put_failure; } + + if (nla_put_u16(skb, IFLA_BOND_SLAVE_ACTOR_PORT_PRIO, + SLAVE_AD_INFO(slave)->port_priority)) + goto nla_put_failure; }

return 0; @@ -130,6 +135,7 @@ static const struct nla_policy bond_policy[IFLA_BOND_MAX + 1] = { static const struct nla_policy bond_slave_policy[IFLA_BOND_SLAVE_MAX + 1] = { [IFLA_BOND_SLAVE_QUEUE_ID] = { .type = NLA_U16 }, [IFLA_BOND_SLAVE_PRIO] = { .type = NLA_S32 }, + [IFLA_BOND_SLAVE_ACTOR_PORT_PRIO] = { .type = NLA_U16 }, };

static int bond_validate(struct nlattr *tb[], struct nlattr *data[], @@ -180,6 +186,16 @@ static int bond_slave_changelink(struct net_device *bond_dev, return err; }

+ if (data[IFLA_BOND_SLAVE_ACTOR_PORT_PRIO]) { + u16 ad_prio = nla_get_u16(data[IFLA_BOND_SLAVE_ACTOR_PORT_PRIO]); + + bond_opt_slave_initval(&newval, &slave_dev, ad_prio); + err = __bond_opt_set(bond, BOND_OPT_ACTOR_PORT_PRIO, &newval, + data[IFLA_BOND_SLAVE_ACTOR_PORT_PRIO], extack); + if (err) + return err; + } + return 0; }

diff --git a/drivers/net/bonding/bond_options.c b/drivers/net/bonding/bond_options.c index 3b6f815c55ff..7cc9b033095b 100644 --- a/drivers/net/bonding/bond_options.c +++ b/drivers/net/bonding/bond_options.c @@ -79,6 +79,8 @@ static int bond_option_tlb_dynamic_lb_set(struct bonding *bond, const struct bond_opt_value *newval); static int bond_option_ad_actor_sys_prio_set(struct bonding *bond, const struct bond_opt_value *newval); +static int bond_option_actor_port_prio_set(struct bonding *bond, + const struct bond_opt_value *newval); static int bond_option_ad_actor_system_set(struct bonding *bond, const struct bond_opt_value *newval); static int bond_option_ad_user_port_key_set(struct bonding *bond, @@ -223,6 +225,13 @@ static const struct bond_opt_value bond_ad_actor_sys_prio_tbl[] = { { NULL, -1, 0}, };

+static const struct bond_opt_value bond_actor_port_prio_tbl[] = { + { "minval", 0, BOND_VALFLAG_MIN}, + { "maxval", 65535, BOND_VALFLAG_MAX}, + { "default", 255, BOND_VALFLAG_DEFAULT}, + { NULL, -1, 0}, +}; + static const struct bond_opt_value bond_ad_user_port_key_tbl[] = { { "minval", 0, BOND_VALFLAG_MIN | BOND_VALFLAG_DEFAULT}, { "maxval", 1023, BOND_VALFLAG_MAX}, @@ -484,6 +493,13 @@ static const struct bond_option bond_opts[BOND_OPT_LAST] = { .values = bond_ad_actor_sys_prio_tbl, .set = bond_option_ad_actor_sys_prio_set, }, + [BOND_OPT_ACTOR_PORT_PRIO] = { + .id = BOND_OPT_ACTOR_PORT_PRIO, + .name = "actor_port_prio", + .unsuppmodes = BOND_MODE_ALL_EX(BIT(BOND_MODE_8023AD)), + .values = bond_actor_port_prio_tbl, + .set = bond_option_actor_port_prio_set, + }, [BOND_OPT_AD_ACTOR_SYSTEM] = { .id = BOND_OPT_AD_ACTOR_SYSTEM, .name = "ad_actor_system", @@ -1817,6 +1833,26 @@ static int bond_option_ad_actor_sys_prio_set(struct bonding *bond, return 0; }

+static int bond_option_actor_port_prio_set(struct bonding *bond, + const struct bond_opt_value *newval) +{ + struct slave *slave; + + slave = bond_slave_get_rtnl(newval->slave_dev); + if (!slave) { + netdev_dbg(bond->dev, "%s called on NULL slave\n", __func__); + return -ENODEV; + } + + netdev_dbg(newval->slave_dev, "Setting actor_port_prio to %llu\n", + newval->value); + + SLAVE_AD_INFO(slave)->port_priority = newval->value; + bond_3ad_update_ad_actor_settings(bond); + + return 0; +} + static int bond_option_ad_actor_system_set(struct bonding *bond, const struct bond_opt_value *newval) { diff --git a/include/net/bond_3ad.h b/include/net/bond_3ad.h index dba369a2cf27..e9188646e22e 100644 --- a/include/net/bond_3ad.h +++ b/include/net/bond_3ad.h @@ -274,6 +274,7 @@ struct ad_slave_info { struct port port; /* 802.3ad port structure */ struct bond_3ad_stats stats; u16 id; + u16 port_priority; };

static inline const char *bond_3ad_churn_desc(churn_state_t state) diff --git a/include/net/bond_options.h b/include/net/bond_options.h index 022b122a9fb6..e6eedf23aea1 100644 --- a/include/net/bond_options.h +++ b/include/net/bond_options.h @@ -78,6 +78,7 @@ enum { BOND_OPT_PRIO, BOND_OPT_COUPLED_CONTROL, BOND_OPT_BROADCAST_NEIGH, + BOND_OPT_ACTOR_PORT_PRIO, BOND_OPT_LAST };

diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h index 784ace3a519c..45f56c9f95d9 100644 --- a/include/uapi/linux/if_link.h +++ b/include/uapi/linux/if_link.h @@ -1564,6 +1564,7 @@ enum { IFLA_BOND_SLAVE_AD_ACTOR_OPER_PORT_STATE, IFLA_BOND_SLAVE_AD_PARTNER_OPER_PORT_STATE, IFLA_BOND_SLAVE_PRIO, + IFLA_BOND_SLAVE_ACTOR_PORT_PRIO, __IFLA_BOND_SLAVE_MAX, };

Add comprehensive selftest to verify: - Per-port actor priority setting via ad_actor_port_prio - Aggregator selection behavior with port_priority ad_select policy

Also move cmd_jq helper from forwarding/lib.sh to net/lib.sh for broader reusability across network selftests.

Here is the result output # ./bond_lacp_prio.sh TEST: bond 802.3ad (ad_actor_port_prio setting) [ OK ] TEST: bond 802.3ad (ad_actor_port_prio select) [ OK ] TEST: bond 802.3ad (ad_actor_port_prio switch) [ OK ]

Signed-off-by: Hangbin Liu liuhangbin@gmail.com --- .../selftests/drivers/net/bonding/Makefile | 3 +- .../drivers/net/bonding/bond_lacp_prio.sh | 108 ++++++++++++++++++ tools/testing/selftests/net/forwarding/lib.sh | 24 ---- tools/testing/selftests/net/lib.sh | 24 ++++ 4 files changed, 134 insertions(+), 25 deletions(-) create mode 100755 tools/testing/selftests/drivers/net/bonding/bond_lacp_prio.sh

diff --git a/tools/testing/selftests/drivers/net/bonding/Makefile b/tools/testing/selftests/drivers/net/bonding/Makefile index 44b98f17f8ff..3462783ed3ac 100644 --- a/tools/testing/selftests/drivers/net/bonding/Makefile +++ b/tools/testing/selftests/drivers/net/bonding/Makefile @@ -11,7 +11,8 @@ TEST_PROGS := \ bond_options.sh \ bond-eth-type-change.sh \ bond_macvlan_ipvlan.sh \ - bond_passive_lacp.sh + bond_passive_lacp.sh \ + bond_lacp_prio.sh

TEST_FILES := \ lag_lib.sh \ diff --git a/tools/testing/selftests/drivers/net/bonding/bond_lacp_prio.sh b/tools/testing/selftests/drivers/net/bonding/bond_lacp_prio.sh new file mode 100755 index 000000000000..a483d505c6a8 --- /dev/null +++ b/tools/testing/selftests/drivers/net/bonding/bond_lacp_prio.sh @@ -0,0 +1,108 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Testing if bond lacp per port priority works +# +# Switch (s_ns) Backup Switch (b_ns) +# +-------------------------+ +-------------------------+ +# | bond0 | | bond0 | +# | + | | + | +# | eth0 | eth1 | | eth0 | eth1 | +# | +---+---+ | | +---+---+ | +# | | | | | | | | +# +-------------------------+ +-------------------------+ +# | | | | +# +-----------------------------------------------------+ +# | | | | | | +# | +-------+---------+---------+-------+ | +# | eth0 eth1 | eth2 eth3 | +# | + | +# | bond0 | +# +-----------------------------------------------------+ +# Client (c_ns) + +lib_dir=$(dirname "$0") +# shellcheck disable=SC1091 +source "$lib_dir"/../../../net/lib.sh + +setup_links() +{ + # shellcheck disable=SC2154 + ip -n "${c_ns}" link add eth0 type veth peer name eth0 netns "${s_ns}" + ip -n "${c_ns}" link add eth1 type veth peer name eth1 netns "${s_ns}" + # shellcheck disable=SC2154 + ip -n "${c_ns}" link add eth2 type veth peer name eth0 netns "${b_ns}" + ip -n "${c_ns}" link add eth3 type veth peer name eth1 netns "${b_ns}" + + ip -n "${c_ns}" link add bond0 type bond mode 802.3ad miimon 100 \ + lacp_rate fast ad_select actor_port_prio + ip -n "${s_ns}" link add bond0 type bond mode 802.3ad miimon 100 \ + lacp_rate fast + ip -n "${b_ns}" link add bond0 type bond mode 802.3ad miimon 100 \ + lacp_rate fast + + ip -n "${c_ns}" link set eth0 master bond0 + ip -n "${c_ns}" link set eth1 master bond0 + ip -n "${c_ns}" link set eth2 master bond0 + ip -n "${c_ns}" link set eth3 master bond0 + ip -n "${s_ns}" link set eth0 master bond0 + ip -n "${s_ns}" link set eth1 master bond0 + ip -n "${b_ns}" link set eth0 master bond0 + ip -n "${b_ns}" link set eth1 master bond0 + + ip -n "${c_ns}" link set bond0 up + ip -n "${s_ns}" link set bond0 up + ip -n "${b_ns}" link set bond0 up +} + +test_port_prio_setting() +{ + RET=0 + ip -n "${c_ns}" link set eth0 type bond_slave actor_port_prio 1000 + prio=$(cmd_jq "ip -n ${c_ns} -d -j link show eth0" \ + ".[].linkinfo.info_slave_data.actor_port_prio") + [ "$prio" -ne 1000 ] && RET=1 + ip -n "${c_ns}" link set eth2 type bond_slave actor_port_prio 10 + prio=$(cmd_jq "ip -n ${c_ns} -d -j link show eth2" \ + ".[].linkinfo.info_slave_data.actor_port_prio") + [ "$prio" -ne 10 ] && RET=1 +} + +test_agg_reselect() +{ + local bond_agg_id slave_agg_id + local expect_slave="$1" + RET=0 + + # Trigger link state change to reselect the aggregator + ip -n "${c_ns}" link set eth1 down + sleep 0.5 + ip -n "${c_ns}" link set eth1 up + sleep 0.5 + + bond_agg_id=$(cmd_jq "ip -n ${c_ns} -d -j link show bond0" \ + ".[].linkinfo.info_data.ad_info.aggregator") + slave_agg_id=$(cmd_jq "ip -n ${c_ns} -d -j link show $expect_slave" \ + ".[].linkinfo.info_slave_data.ad_aggregator_id") + # shellcheck disable=SC2034 + [ "${bond_agg_id}" -ne "${slave_agg_id}" ] && \ + RET=1 +} + +trap cleanup_all_ns EXIT +setup_ns c_ns s_ns b_ns +setup_links + +test_port_prio_setting +log_test "bond 802.3ad" "actor_port_prio setting" + +test_agg_reselect eth0 +log_test "bond 802.3ad" "actor_port_prio select" + +# Change the actor port prio and re-test +ip -n "${c_ns}" link set eth0 type bond_slave actor_port_prio 10 +ip -n "${c_ns}" link set eth2 type bond_slave actor_port_prio 1000 +test_agg_reselect eth2 +log_test "bond 802.3ad" "actor_port_prio switch" + +exit "${EXIT_STATUS}" diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh index 890b3374dacd..08121cb9dc26 100644 --- a/tools/testing/selftests/net/forwarding/lib.sh +++ b/tools/testing/selftests/net/forwarding/lib.sh @@ -571,30 +571,6 @@ wait_for_dev() fi }

-cmd_jq() -{ - local cmd=$1 - local jq_exp=$2 - local jq_opts=$3 - local ret - local output - - output="$($cmd)" - # it the command fails, return error right away - ret=$? - if [[ $ret -ne 0 ]]; then - return $ret - fi - output=$(echo $output | jq -r $jq_opts "$jq_exp") - ret=$? - if [[ $ret -ne 0 ]]; then - return $ret - fi - echo $output - # return success only in case of non-empty output - [ ! -z "$output" ] -} - pre_cleanup() { if [ "${PAUSE_ON_CLEANUP}" = "yes" ]; then diff --git a/tools/testing/selftests/net/lib.sh b/tools/testing/selftests/net/lib.sh index c7add0dc4c60..4dca6893aa8a 100644 --- a/tools/testing/selftests/net/lib.sh +++ b/tools/testing/selftests/net/lib.sh @@ -645,3 +645,27 @@ wait_local_port_listen() sleep 0.1 done } + +cmd_jq() +{ + local cmd=$1 + local jq_exp=$2 + local jq_opts=$3 + local ret + local output + + output="$($cmd)" + # it the command fails, return error right away + ret=$? + if [[ $ret -ne 0 ]]; then + return $ret + fi + output=$(echo $output | jq -r $jq_opts "$jq_exp") + ret=$? + if [[ $ret -ne 0 ]]; then + return $ret + fi + echo $output + # return success only in case of non-empty output + [ ! -z "$output" ] +}