For this patchset, test cases of the qdisc modules are added to the tc-testing test suite.
After a test case is added locally, the test result is as follows:
./tdc.py -c atm ok 1 7628 - Create ATM with default setting ok 2 390a - Delete ATM with valid handle ok 3 32a0 - Show ATM class ok 4 6310 - Dump ATM stats
./tdc.py -c choke ok 1 8937 - Create CHOKE with default setting ok 2 48c0 - Create CHOKE with min packet setting ok 3 38c1 - Create CHOKE with max packet setting ok 4 234a - Create CHOKE with ecn setting ok 5 4380 - Create CHOKE with burst setting ok 6 48c7 - Delete CHOKE with valid handle ok 7 4398 - Replace CHOKE with min setting ok 8 0301 - Change CHOKE with limit setting
./tdc.py -c codel ok 1 983a - Create CODEL with default setting ok 2 38aa - Create CODEL with limit packet setting ok 3 9178 - Create CODEL with target setting ok 4 78d1 - Create CODEL with interval setting ok 5 238a - Create CODEL with ecn setting ok 6 939c - Create CODEL with ce_threshold setting ok 7 8380 - Delete CODEL with valid handle ok 8 289c - Replace CODEL with limit setting ok 9 0648 - Change CODEL with limit setting
./tdc.py -c etf ok 1 34ba - Create ETF with default setting ok 2 438f - Create ETF with delta nanos setting ok 3 9041 - Create ETF with deadline_mode setting ok 4 9a0c - Create ETF with skip_sock_check setting ok 5 2093 - Delete ETF with valid handle
./tdc.py -c fq ok 1 983b - Create FQ with default setting ok 2 38a1 - Create FQ with limit packet setting ok 3 0a18 - Create FQ with flow_limit setting ok 4 2390 - Create FQ with quantum setting ok 5 845b - Create FQ with initial_quantum setting ok 6 9398 - Create FQ with maxrate setting ok 7 342c - Create FQ with nopacing setting ok 8 6391 - Create FQ with refill_delay setting ok 9 238b - Create FQ with low_rate_threshold setting ok 10 7582 - Create FQ with orphan_mask setting ok 11 4894 - Create FQ with timer_slack setting ok 12 324c - Create FQ with ce_threshold setting ok 13 424a - Create FQ with horizon time setting ok 14 89e1 - Create FQ with horizon_cap setting ok 15 32e1 - Delete FQ with valid handle ok 16 49b0 - Replace FQ with limit setting ok 17 9478 - Change FQ with limit setting
./tdc.py -c gred ok 1 8942 - Create GRED with default setting ok 2 5783 - Create GRED with grio setting ok 3 8a09 - Create GRED with limit setting ok 4 48cb - Create GRED with ecn setting ok 5 763a - Change GRED setting ok 6 8309 - Show GRED class
./tdc.py -c hhf ok 1 4812 - Create HHF with default setting ok 2 8a92 - Create HHF with limit setting ok 3 3491 - Create HHF with quantum setting ok 4 ba04 - Create HHF with reset_timeout setting ok 5 4238 - Create HHF with admit_bytes setting ok 6 839f - Create HHF with evict_timeout setting ok 7 a044 - Create HHF with non_hh_weight setting ok 8 32f9 - Change HHF with limit setting ok 9 385e - Show HHF class
./tdc.py -c pfifo_fast ok 1 900c - Create pfifo_fast with default setting ok 2 7470 - Dump pfifo_fast stats ok 3 b974 - Replace pfifo_fast with different handle ok 4 3240 - Delete pfifo_fast with valid handle ok 5 4385 - Delete pfifo_fast with invalid handle
./tdc.py -c plug ok 1 3289 - Create PLUG with default setting ok 2 0917 - Create PLUG with block setting ok 3 483b - Create PLUG with release setting ok 4 4995 - Create PLUG with release_indefinite setting ok 5 389c - Create PLUG with limit setting ok 6 384a - Delete PLUG with valid handle ok 7 439a - Replace PLUG with limit setting ok 8 9831 - Change PLUG with limit setting
./tdc.py -c sfb ok 1 3294 - Create SFB with default setting ok 2 430a - Create SFB with rehash setting ok 3 3410 - Create SFB with db setting ok 4 49a0 - Create SFB with limit setting ok 5 1241 - Create SFB with max setting ok 6 3249 - Create SFB with target setting ok 7 30a9 - Create SFB with increment setting ok 8 239a - Create SFB with decrement setting ok 9 9301 - Create SFB with penalty_rate setting ok 10 2a01 - Create SFB with penalty_burst setting ok 11 3209 - Change SFB with rehash setting ok 12 5447 - Show SFB class
./tdc.py -c sfq ok 1 7482 - Create SFQ with default setting ok 2 c186 - Create SFQ with limit setting ok 3 ae23 - Create SFQ with perturb setting ok 4 a430 - Create SFQ with quantum setting ok 5 4539 - Create SFQ with divisor setting ok 6 b089 - Create SFQ with flows setting ok 7 99a0 - Create SFQ with depth setting ok 8 7389 - Create SFQ with headdrop setting ok 9 6472 - Create SFQ with redflowlimit setting ok 10 8929 - Show SFQ class
./tdc.py -c skbprio ok 1 283e - Create skbprio with default setting ok 2 c086 - Create skbprio with limit setting ok 3 6733 - Change skbprio with limit setting ok 4 2958 - Show skbprio class
./tdc.py -c taprio ok 1 ba39 - Add taprio Qdisc to multi-queue device (8 queues) ok 2 9462 - Add taprio Qdisc with multiple sched-entry ok 3 8d92 - Add taprio Qdisc with txtime-delay ok 4 d092 - Delete taprio Qdisc with valid handle ok 5 8471 - Show taprio class ok 6 0a85 - Add taprio Qdisc to single-queue device
./tdc.py -c tbf ok 1 6430 - Create TBF with default setting ok 2 0518 - Create TBF with mtu setting ok 3 320a - Create TBF with peakrate setting ok 4 239b - Create TBF with latency setting ok 5 c975 - Create TBF with overhead setting ok 6 948c - Create TBF with linklayer setting ok 7 3549 - Replace TBF with mtu ok 8 f948 - Change TBF with latency time ok 9 2348 - Show TBF class
./tdc.py -c teql ok 1 84a0 - Create TEQL with default setting ok 2 7734 - Create TEQL with multiple device ok 3 34a9 - Delete TEQL with valid handle ok 4 6289 - Show TEQL stats
--- v2: modify subject prefix --- Zhengchao Shao (15): selftests/tc-testing: add selftests for atm qdisc selftests/tc-testing: add selftests for choke qdisc selftests/tc-testing: add selftests for codel qdisc selftests/tc-testing: add selftests for etf qdisc selftests/tc-testing: add selftests for fq qdisc selftests/tc-testing: add selftests for gred qdisc selftests/tc-testing: add selftests for hhf qdisc selftests/tc-testing: add selftests for pfifo_fast qdisc selftests/tc-testing: add selftests for plug qdisc selftests/tc-testing: add selftests for sfb qdisc selftests/tc-testing: add selftests for sfq qdisc selftests/tc-testing: add selftests for skbprio qdisc selftests/tc-testing: add selftests for taprio qdisc selftests/tc-testing: add selftests for tbf qdisc selftests/tc-testing: add selftests for teql qdisc
.../tc-testing/tc-tests/qdiscs/atm.json | 94 +++++ .../tc-testing/tc-tests/qdiscs/choke.json | 188 +++++++++ .../tc-testing/tc-tests/qdiscs/codel.json | 211 ++++++++++ .../tc-testing/tc-tests/qdiscs/etf.json | 117 ++++++ .../tc-testing/tc-tests/qdiscs/fq.json | 395 ++++++++++++++++++ .../tc-testing/tc-tests/qdiscs/gred.json | 164 ++++++++ .../tc-testing/tc-tests/qdiscs/hhf.json | 210 ++++++++++ .../tc-tests/qdiscs/pfifo_fast.json | 119 ++++++ .../tc-testing/tc-tests/qdiscs/plug.json | 188 +++++++++ .../tc-testing/tc-tests/qdiscs/sfb.json | 279 +++++++++++++ .../tc-testing/tc-tests/qdiscs/sfq.json | 232 ++++++++++ .../tc-testing/tc-tests/qdiscs/skbprio.json | 95 +++++ .../tc-testing/tc-tests/qdiscs/taprio.json | 135 ++++++ .../tc-testing/tc-tests/qdiscs/tbf.json | 211 ++++++++++ .../tc-testing/tc-tests/qdiscs/teql.json | 97 +++++ 15 files changed, 2735 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/atm.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/choke.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/codel.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/etf.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/fq.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/gred.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/hhf.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/pfifo_fast.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/plug.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfb.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfq.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/skbprio.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/taprio.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/tbf.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/teql.json
Test 7628: Create ATM with default setting Test 390a: Delete ATM with valid handle Test 32a0: Show ATM class Test 6310: Dump ATM stats
Signed-off-by: Zhengchao Shao shaozhengchao@huawei.com --- .../tc-testing/tc-tests/qdiscs/atm.json | 94 +++++++++++++++++++ 1 file changed, 94 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/atm.json
diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/atm.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/atm.json new file mode 100644 index 000000000000..f5bc8670a67d --- /dev/null +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/atm.json @@ -0,0 +1,94 @@ +[ + { + "id": "7628", + "name": "Create ATM with default setting", + "category": [ + "qdisc", + "atm" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root atm", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc atm 1: root refcnt", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "390a", + "name": "Delete ATM with valid handle", + "category": [ + "qdisc", + "atm" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root atm" + ], + "cmdUnderTest": "$TC qdisc del dev $DUMMY handle 1: root", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc atm 1: root refcnt", + "matchCount": "0", + "teardown": [ + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "32a0", + "name": "Show ATM class", + "category": [ + "qdisc", + "atm" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root atm", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $DUMMY", + "matchPattern": "class atm 1: parent 1:", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "6310", + "name": "Dump ATM stats", + "category": [ + "qdisc", + "atm" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root atm", + "expExitCode": "0", + "verifyCmd": "$TC -s qdisc show dev $DUMMY", + "matchPattern": "qdisc atm 1: root refcnt", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + } +]
Test 8937: Create CHOKE with default setting Test 48c0: Create CHOKE with min packet setting Test 38c1: Create CHOKE with max packet setting Test 234a: Create CHOKE with ecn setting Test 4380: Create CHOKE with burst setting Test 48c7: Delete CHOKE with valid handle Test 4398: Replace CHOKE with min setting Test 0301: Change CHOKE with limit setting
Signed-off-by: Zhengchao Shao shaozhengchao@huawei.com --- .../tc-testing/tc-tests/qdiscs/choke.json | 188 ++++++++++++++++++ 1 file changed, 188 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/choke.json
diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/choke.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/choke.json new file mode 100644 index 000000000000..31b7775d25fc --- /dev/null +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/choke.json @@ -0,0 +1,188 @@ +[ + { + "id": "8937", + "name": "Create CHOKE with default setting", + "category": [ + "qdisc", + "choke" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root choke limit 1000 bandwidth 10000", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc choke 1: root refcnt [0-9]+ limit 1000p min 83p max 250p", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "48c0", + "name": "Create CHOKE with min packet setting", + "category": [ + "qdisc", + "choke" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root choke limit 1000 bandwidth 10000 min 100", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc choke 1: root refcnt [0-9]+ limit 1000p min 100p max 250p", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "38c1", + "name": "Create CHOKE with max packet setting", + "category": [ + "qdisc", + "choke" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root choke limit 1000 bandwidth 10000 max 900", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc choke 1: root refcnt [0-9]+ limit 1000p min.*max 900p", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "234a", + "name": "Create CHOKE with ecn setting", + "category": [ + "qdisc", + "choke" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root choke limit 1000 bandwidth 10000 ecn", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc choke 1: root refcnt [0-9]+ limit 1000p min 83p max 250p ecn", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "4380", + "name": "Create CHOKE with burst setting", + "category": [ + "qdisc", + "choke" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root choke limit 1000 bandwidth 10000 burst 100", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc choke 1: root refcnt [0-9]+ limit 1000p min 83p max 250p", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "48c7", + "name": "Delete CHOKE with valid handle", + "category": [ + "qdisc", + "choke" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root choke limit 1000 bandwidth 10000" + ], + "cmdUnderTest": "$TC qdisc del dev $DUMMY handle 1: root", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc choke 1: root refcnt [0-9]+ limit 1000p min 83p max 250p", + "matchCount": "0", + "teardown": [ + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "4398", + "name": "Replace CHOKE with min setting", + "category": [ + "qdisc", + "choke" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root choke limit 1000 bandwidth 10000" + ], + "cmdUnderTest": "$TC qdisc replace dev $DUMMY handle 1: root choke limit 1000 bandwidth 10000 min 100", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc choke 1: root refcnt [0-9]+ limit 1000p min 100p max 250p", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "0301", + "name": "Change CHOKE with limit setting", + "category": [ + "qdisc", + "choke" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root choke limit 1000 bandwidth 10000" + ], + "cmdUnderTest": "$TC qdisc change dev $DUMMY handle 1: root choke limit 1000 bandwidth 10000 min 100", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc choke 1: root refcnt [0-9]+ limit 1000p min 100p max 250p", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + } +]
Test 983a: Create CODEL with default setting Test 38aa: Create CODEL with limit packet setting Test 9178: Create CODEL with target setting Test 78d1: Create CODEL with interval setting Test 238a: Create CODEL with ecn setting Test 939c: Create CODEL with ce_threshold setting Test 8380: Delete CODEL with valid handle Test 289c: Replace CODEL with limit setting Test 0648: Change CODEL with limit setting
Signed-off-by: Zhengchao Shao shaozhengchao@huawei.com --- .../tc-testing/tc-tests/qdiscs/codel.json | 211 ++++++++++++++++++ 1 file changed, 211 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/codel.json
diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/codel.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/codel.json new file mode 100644 index 000000000000..ea38099d48e5 --- /dev/null +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/codel.json @@ -0,0 +1,211 @@ +[ + { + "id": "983a", + "name": "Create CODEL with default setting", + "category": [ + "qdisc", + "codel" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root codel", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc codel 1: root refcnt [0-9]+ limit 1000p target 5ms interval 100ms", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "38aa", + "name": "Create CODEL with limit packet setting", + "category": [ + "qdisc", + "codel" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root codel limit 1500", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc codel 1: root refcnt [0-9]+ limit 1500p target 5ms interval 100ms", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "9178", + "name": "Create CODEL with target setting", + "category": [ + "qdisc", + "codel" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root codel target 100ms", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc codel 1: root refcnt [0-9]+ limit 1000p target 100ms interval 100ms", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "78d1", + "name": "Create CODEL with interval setting", + "category": [ + "qdisc", + "codel" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root codel interval 20ms", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc codel 1: root refcnt [0-9]+ limit 1000p target 5ms interval 20ms", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "238a", + "name": "Create CODEL with ecn setting", + "category": [ + "qdisc", + "codel" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root codel ecn", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc codel 1: root refcnt [0-9]+ limit 1000p target 5ms interval 100ms ecn", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "939c", + "name": "Create CODEL with ce_threshold setting", + "category": [ + "qdisc", + "codel" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root codel ce_threshold 20ms", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc codel 1: root refcnt [0-9]+ limit 1000p target 5ms ce_threshold 20ms interval 100ms", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "8380", + "name": "Delete CODEL with valid handle", + "category": [ + "qdisc", + "codel" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root codel" + ], + "cmdUnderTest": "$TC qdisc del dev $DUMMY handle 1: root", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc codel 1: root refcnt [0-9]+ limit 1000p target 5ms interval 100ms", + "matchCount": "0", + "teardown": [ + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "289c", + "name": "Replace CODEL with limit setting", + "category": [ + "qdisc", + "codel" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root codel" + ], + "cmdUnderTest": "$TC qdisc replace dev $DUMMY handle 1: root codel limit 5000", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc codel 1: root refcnt [0-9]+ limit 5000p target 5ms interval 100ms", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "0648", + "name": "Change CODEL with limit setting", + "category": [ + "qdisc", + "codel" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root codel" + ], + "cmdUnderTest": "$TC qdisc change dev $DUMMY handle 1: root codel limit 100", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc codel 1: root refcnt [0-9]+ limit 100p target 5ms interval 100ms", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + } +]
Test 34ba: Create ETF with default setting Test 438f: Create ETF with delta nanos setting Test 9041: Create ETF with deadline_mode setting Test 9a0c: Create ETF with skip_sock_check setting Test 2093: Delete ETF with valid handle
Signed-off-by: Zhengchao Shao shaozhengchao@huawei.com --- .../tc-testing/tc-tests/qdiscs/etf.json | 117 ++++++++++++++++++ 1 file changed, 117 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/etf.json
diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/etf.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/etf.json new file mode 100644 index 000000000000..0046d44bcd93 --- /dev/null +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/etf.json @@ -0,0 +1,117 @@ +[ + { + "id": "34ba", + "name": "Create ETF with default setting", + "category": [ + "qdisc", + "etf" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root etf clockid CLOCK_TAI", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc etf 1: root refcnt [0-9]+ clockid TAI delta 0 offload off deadline_mode off skip_sock_check off", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "438f", + "name": "Create ETF with delta nanos setting", + "category": [ + "qdisc", + "etf" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root etf delta 100 clockid CLOCK_TAI", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc etf 1: root refcnt [0-9]+ clockid TAI delta 100 offload off deadline_mode off skip_sock_check off", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "9041", + "name": "Create ETF with deadline_mode setting", + "category": [ + "qdisc", + "etf" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root etf clockid CLOCK_TAI deadline_mode", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc etf 1: root refcnt [0-9]+ clockid TAI delta 0 offload off deadline_mode on skip_sock_check off", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "9a0c", + "name": "Create ETF with skip_sock_check setting", + "category": [ + "qdisc", + "etf" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root etf clockid CLOCK_TAI skip_sock_check", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc etf 1: root refcnt [0-9]+ clockid TAI delta 0 offload off deadline_mode off skip_sock_check on", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "2093", + "name": "Delete ETF with valid handle", + "category": [ + "qdisc", + "etf" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root etf clockid CLOCK_TAI" + ], + "cmdUnderTest": "$TC qdisc del dev $DUMMY handle 1: root", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc etf 1: root refcnt [0-9]+ clockid TAI delta 0 offload off deadline_mode off skip_sock_check off", + "matchCount": "0", + "teardown": [ + "$IP link del dev $DUMMY type dummy" + ] + } +]
Test 983b: Create FQ with default setting Test 38a1: Create FQ with limit packet setting Test 0a18: Create FQ with flow_limit setting Test 2390: Create FQ with quantum setting Test 845b: Create FQ with initial_quantum setting Test 9398: Create FQ with maxrate setting Test 342c: Create FQ with nopacing setting Test 6391: Create FQ with refill_delay setting Test 238b: Create FQ with low_rate_threshold setting Test 7582: Create FQ with orphan_mask setting Test 4894: Create FQ with timer_slack setting Test 324c: Create FQ with ce_threshold setting Test 424a: Create FQ with horizon time setting Test 89e1: Create FQ with horizon_cap setting Test 32e1: Delete FQ with valid handle Test 49b0: Replace FQ with limit setting Test 9478: Change FQ with limit setting
Signed-off-by: Zhengchao Shao shaozhengchao@huawei.com --- .../tc-testing/tc-tests/qdiscs/fq.json | 395 ++++++++++++++++++ 1 file changed, 395 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/fq.json
diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/fq.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/fq.json new file mode 100644 index 000000000000..8acb904d1419 --- /dev/null +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/fq.json @@ -0,0 +1,395 @@ +[ + { + "id": "983b", + "name": "Create FQ with default setting", + "category": [ + "qdisc", + "fq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "38a1", + "name": "Create FQ with limit packet setting", + "category": [ + "qdisc", + "fq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq limit 3000", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit 3000p", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "0a18", + "name": "Create FQ with flow_limit setting", + "category": [ + "qdisc", + "fq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq flow_limit 300", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit 10000p flow_limit 300p", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "2390", + "name": "Create FQ with quantum setting", + "category": [ + "qdisc", + "fq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq quantum 9000", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit 10000p flow_limit 100p buckets.*orphan_mask 1023 quantum 9000b", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "845b", + "name": "Create FQ with initial_quantum setting", + "category": [ + "qdisc", + "fq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq initial_quantum 900000", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit 10000p flow_limit 100p buckets.*initial_quantum 900000b", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "9398", + "name": "Create FQ with maxrate setting", + "category": [ + "qdisc", + "fq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq maxrate 100000", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit 10000p flow_limit 100p buckets.*maxrate 100Kbit", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "342c", + "name": "Create FQ with nopacing setting", + "category": [ + "qdisc", + "fq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq nopacing", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit 10000p flow_limit 100p.*nopacing", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "6391", + "name": "Create FQ with refill_delay setting", + "category": [ + "qdisc", + "fq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq refill_delay 100ms", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit 10000p flow_limit 100p.*refill_delay 100ms", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "238b", + "name": "Create FQ with low_rate_threshold setting", + "category": [ + "qdisc", + "fq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq low_rate_threshold 10000", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit 10000p flow_limit 100p.*low_rate_threshold 10Kbit", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "7582", + "name": "Create FQ with orphan_mask setting", + "category": [ + "qdisc", + "fq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq orphan_mask 255", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit 10000p flow_limit 100p.*orphan_mask 255", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "4894", + "name": "Create FQ with timer_slack setting", + "category": [ + "qdisc", + "fq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq timer_slack 100", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit 10000p flow_limit 100p.*timer_slack 100ns", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "324c", + "name": "Create FQ with ce_threshold setting", + "category": [ + "qdisc", + "fq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq ce_threshold 100", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit 10000p flow_limit 100p", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "424a", + "name": "Create FQ with horizon time setting", + "category": [ + "qdisc", + "fq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq horizon 100", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit 10000p flow_limit 100p.*horizon 100us", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "89e1", + "name": "Create FQ with horizon_cap setting", + "category": [ + "qdisc", + "fq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq horizon_cap", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit 10000p flow_limit 100p.*horizon_cap", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "32e1", + "name": "Delete FQ with valid handle", + "category": [ + "qdisc", + "fq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root fq" + ], + "cmdUnderTest": "$TC qdisc del dev $DUMMY handle 1: root", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit 10000p", + "matchCount": "0", + "teardown": [ + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "49b0", + "name": "Replace FQ with limit setting", + "category": [ + "qdisc", + "fq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root fq" + ], + "cmdUnderTest": "$TC qdisc replace dev $DUMMY handle 1: root fq limit 5000", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit 5000p", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "9478", + "name": "Change FQ with limit setting", + "category": [ + "qdisc", + "fq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root fq" + ], + "cmdUnderTest": "$TC qdisc change dev $DUMMY handle 1: root fq limit 100", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit 100p", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + } +]
Test 8942: Create GRED with default setting Test 5783: Create GRED with grio setting Test 8a09: Create GRED with limit setting Test 48cb: Create GRED with ecn setting Test 763a: Change GRED setting Test 8309: Show GRED class
Signed-off-by: Zhengchao Shao shaozhengchao@huawei.com --- .../tc-testing/tc-tests/qdiscs/gred.json | 164 ++++++++++++++++++ 1 file changed, 164 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/gred.json
diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/gred.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/gred.json new file mode 100644 index 000000000000..013c8ee037a4 --- /dev/null +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/gred.json @@ -0,0 +1,164 @@ +[ + { + "id": "8942", + "name": "Create GRED with default setting", + "category": [ + "qdisc", + "gred" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root gred setup vqs 10 default 1", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc gred 1: root refcnt [0-9]+ vqs 10 default 1", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "5783", + "name": "Create GRED with grio setting", + "category": [ + "qdisc", + "gred" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root gred setup vqs 10 default 1 grio", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc gred 1: root refcnt [0-9]+ vqs 10 default 1.*grio", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "8a09", + "name": "Create GRED with limit setting", + "category": [ + "qdisc", + "gred" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root gred setup vqs 10 default 1 limit 1000", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc gred 1: root refcnt [0-9]+ vqs 10 default 1 limit 1000b", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "48ca", + "name": "Create GRED with ecn setting", + "category": [ + "qdisc", + "gred" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root gred setup vqs 10 default 2 ecn", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc gred 1: root refcnt [0-9]+ vqs 10 default 2.*ecn", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "48cb", + "name": "Create GRED with harddrop setting", + "category": [ + "qdisc", + "gred" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root gred setup vqs 10 default 2 harddrop", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc gred 1: root refcnt [0-9]+ vqs 10 default 2.*harddrop", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "763a", + "name": "Change GRED setting", + "category": [ + "qdisc", + "gred" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root gred setup vqs 10 default 1" + ], + "cmdUnderTest": "$TC qdisc change dev $DUMMY handle 1: root gred limit 60KB min 15K max 25K burst 64 avpkt 1500 bandwidth 10Mbit DP 1 probability 0.1", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc gred 1: root refcnt [0-9]+ vqs 10 default 1 limit.*vq 1 prio [0-9]+ limit 60Kb min 15Kb max 25Kb", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "8309", + "name": "Show GRED class", + "category": [ + "qdisc", + "gred" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root gred setup vqs 10 default 1", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $DUMMY", + "matchPattern": "class gred 1:", + "matchCount": "0", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + } +]
Test 4812: Create HHF with default setting Test 8a92: Create HHF with limit setting Test 3491: Create HHF with quantum setting Test ba04: Create HHF with reset_timeout setting Test 4238: Create HHF with admit_bytes setting Test 839f: Create HHF with evict_timeout setting Test a044: Create HHF with non_hh_weight setting Test 32f9: Change HHF with limit setting Test 385e: Show HHF class
Signed-off-by: Zhengchao Shao shaozhengchao@huawei.com --- .../tc-testing/tc-tests/qdiscs/hhf.json | 210 ++++++++++++++++++ 1 file changed, 210 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/hhf.json
diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/hhf.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/hhf.json new file mode 100644 index 000000000000..949f6e5de902 --- /dev/null +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/hhf.json @@ -0,0 +1,210 @@ +[ + { + "id": "4812", + "name": "Create HHF with default setting", + "category": [ + "qdisc", + "hhf" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root hhf", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc hhf 1: root refcnt [0-9]+.*hh_limit 2048 reset_timeout 40ms admit_bytes 128Kb evict_timeout 1s non_hh_weight 2", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "8a92", + "name": "Create HHF with limit setting", + "category": [ + "qdisc", + "hhf" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root hhf limit 1500", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc hhf 1: root refcnt [0-9]+ limit 1500p.*hh_limit 2048 reset_timeout 40ms admit_bytes 128Kb evict_timeout 1s non_hh_weight 2", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "3491", + "name": "Create HHF with quantum setting", + "category": [ + "qdisc", + "hhf" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root hhf quantum 9000", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc hhf 1: root refcnt [0-9]+.*quantum 9000b hh_limit 2048 reset_timeout 40ms admit_bytes 128Kb evict_timeout 1s non_hh_weight 2", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "ba04", + "name": "Create HHF with reset_timeout setting", + "category": [ + "qdisc", + "hhf" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root hhf reset_timeout 100ms", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc hhf 1: root refcnt [0-9]+.*hh_limit 2048 reset_timeout 100ms admit_bytes 128Kb evict_timeout 1s non_hh_weight 2", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "4238", + "name": "Create HHF with admit_bytes setting", + "category": [ + "qdisc", + "hhf" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root hhf admit_bytes 100000", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc hhf 1: root refcnt [0-9]+.*hh_limit 2048 reset_timeout 40ms admit_bytes 100000b evict_timeout 1s non_hh_weight 2", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "839f", + "name": "Create HHF with evict_timeout setting", + "category": [ + "qdisc", + "hhf" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root hhf evict_timeout 0.5s", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc hhf 1: root refcnt [0-9]+.*hh_limit 2048 reset_timeout 40ms admit_bytes 128Kb evict_timeout 500ms non_hh_weight 2", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "a044", + "name": "Create HHF with non_hh_weight setting", + "category": [ + "qdisc", + "hhf" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root hhf non_hh_weight 10", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc hhf 1: root refcnt [0-9]+.*hh_limit 2048 reset_timeout 40ms admit_bytes 128Kb evict_timeout 1s non_hh_weight 10", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "32f9", + "name": "Change HHF with limit setting", + "category": [ + "qdisc", + "hhf" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root hhf" + ], + "cmdUnderTest": "$TC qdisc change dev $DUMMY handle 1: root hhf limit 1500", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc hhf 1: root refcnt [0-9]+ limit 1500p.*hh_limit 2048 reset_timeout 40ms admit_bytes 128Kb evict_timeout 1s non_hh_weight 2", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "385e", + "name": "Show HHF class", + "category": [ + "qdisc", + "hhf" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root hhf", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $DUMMY", + "matchPattern": "class hhf 1:", + "matchCount": "0", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + } +]
Test 900c: Create pfifo_fast with default setting Test 7470: Dump pfifo_fast stats Test b974: Replace pfifo_fast with different handle Test 3240: Delete pfifo_fast with valid handle Test 4385: Delete pfifo_fast with invalid handle
Signed-off-by: Zhengchao Shao shaozhengchao@huawei.com --- .../tc-tests/qdiscs/pfifo_fast.json | 119 ++++++++++++++++++ 1 file changed, 119 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/pfifo_fast.json
diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/pfifo_fast.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/pfifo_fast.json new file mode 100644 index 000000000000..ab53238f4c5a --- /dev/null +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/pfifo_fast.json @@ -0,0 +1,119 @@ +[ + { + "id": "900c", + "name": "Create pfifo_fast with default setting", + "category": [ + "qdisc", + "pfifo_fast" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root pfifo_fast", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc pfifo_fast 1: root refcnt [0-9]+ bands 3 priomap", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "7470", + "name": "Dump pfifo_fast stats", + "category": [ + "qdisc", + "pfifo_fast" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root pfifo_fast", + "expExitCode": "0", + "verifyCmd": "$TC -s qdisc show dev $DUMMY", + "matchPattern": "Sent.*bytes.*pkt \(dropped.*overlimits.*requeues .*\)", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "b974", + "name": "Replace pfifo_fast with different handle", + "category": [ + "qdisc", + "pfifo_fast" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root pfifo_fast" + ], + "cmdUnderTest": "$TC qdisc replace dev $DUMMY handle 2: root pfifo_fast", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc pfifo_fast 2: root refcnt [0-9]+ bands 3 priomap", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 2: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "3240", + "name": "Delete pfifo_fast with valid handle", + "category": [ + "qdisc", + "pfifo_fast" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root pfifo_fast" + ], + "cmdUnderTest": "$TC qdisc del dev $DUMMY handle 1: root", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc pfifo_fast 1: root refcnt [0-9]+ bands 3 priomap", + "matchCount": "0", + "teardown": [ + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "4385", + "name": "Delete pfifo_fast with invalid handle", + "category": [ + "qdisc", + "pfifo_fast" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root pfifo_fast" + ], + "cmdUnderTest": "$TC qdisc del dev $DUMMY handle 2: root", + "expExitCode": "2", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc pfifo_fast 1: root refcnt [0-9]+ bands 3 priomap", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + } +]
Test 3289: Create PLUG with default setting Test 0917: Create PLUG with block setting Test 483b: Create PLUG with release setting Test 4995: Create PLUG with release_indefinite setting Test 389c: Create PLUG with limit setting Test 384a: Delete PLUG with valid handle Test 439a: Replace PLUG with limit setting Test 9831: Change PLUG with limit setting
Signed-off-by: Zhengchao Shao shaozhengchao@huawei.com --- .../tc-testing/tc-tests/qdiscs/plug.json | 188 ++++++++++++++++++ 1 file changed, 188 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/plug.json
diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/plug.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/plug.json new file mode 100644 index 000000000000..6454518af178 --- /dev/null +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/plug.json @@ -0,0 +1,188 @@ +[ + { + "id": "3289", + "name": "Create PLUG with default setting", + "category": [ + "qdisc", + "plug" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root plug", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc plug 1: root refcnt", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "0917", + "name": "Create PLUG with block setting", + "category": [ + "qdisc", + "plug" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root plug block", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc plug 1: root refcnt", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "483b", + "name": "Create PLUG with release setting", + "category": [ + "qdisc", + "plug" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root plug release", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc plug 1: root refcnt", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "4995", + "name": "Create PLUG with release_indefinite setting", + "category": [ + "qdisc", + "plug" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root plug release_indefinite", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc plug 1: root refcnt", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "389c", + "name": "Create PLUG with limit setting", + "category": [ + "qdisc", + "plug" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root plug limit 100", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc plug 1: root refcnt", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "384a", + "name": "Delete PLUG with valid handle", + "category": [ + "qdisc", + "plug" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root plug" + ], + "cmdUnderTest": "$TC qdisc del dev $DUMMY handle 1: root", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc plug 1: root refcnt", + "matchCount": "0", + "teardown": [ + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "439a", + "name": "Replace PLUG with limit setting", + "category": [ + "qdisc", + "plug" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root plug" + ], + "cmdUnderTest": "$TC qdisc replace dev $DUMMY handle 1: root plug limit 1000", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc plug 1: root refcnt", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "9831", + "name": "Change PLUG with limit setting", + "category": [ + "qdisc", + "plug" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root plug" + ], + "cmdUnderTest": "$TC qdisc change dev $DUMMY handle 1: root plug limit 1000", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc plug 1: root refcnt", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + } +]
Test 3294: Create SFB with default setting Test 430a: Create SFB with rehash setting Test 3410: Create SFB with db setting Test 49a0: Create SFB with limit setting Test 1241: Create SFB with max setting Test 3249: Create SFB with target setting Test 30a9: Create SFB with increment setting Test 239a: Create SFB with decrement setting Test 9301: Create SFB with penalty_rate setting Test 2a01: Create SFB with penalty_burst setting Test 3209: Change SFB with rehash setting Test 5447: Show SFB class
Signed-off-by: Zhengchao Shao shaozhengchao@huawei.com --- .../tc-testing/tc-tests/qdiscs/sfb.json | 279 ++++++++++++++++++ 1 file changed, 279 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfb.json
diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfb.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfb.json new file mode 100644 index 000000000000..ba2f5e79cdbf --- /dev/null +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfb.json @@ -0,0 +1,279 @@ +[ + { + "id": "3294", + "name": "Create SFB with default setting", + "category": [ + "qdisc", + "sfb" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfb", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc sfb 1: root refcnt [0-9]+ rehash 600s db 60s", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "430a", + "name": "Create SFB with rehash setting", + "category": [ + "qdisc", + "sfb" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfb rehash 60", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc sfb 1: root refcnt [0-9]+ rehash 60ms db 60s", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "3410", + "name": "Create SFB with db setting", + "category": [ + "qdisc", + "sfb" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfb db 10", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc sfb 1: root refcnt [0-9]+ rehash 600s db 10ms", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "49a0", + "name": "Create SFB with limit setting", + "category": [ + "qdisc", + "sfb" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfb limit 100", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc sfb 1: root refcnt [0-9]+ rehash 600s db 60s limit 100p", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "1241", + "name": "Create SFB with max setting", + "category": [ + "qdisc", + "sfb" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfb max 100", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc sfb 1: root refcnt 2 rehash 600s db 60s.*max 100p", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "3249", + "name": "Create SFB with target setting", + "category": [ + "qdisc", + "sfb" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfb target 100", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc sfb 1: root refcnt 2 rehash 600s db 60s.*target 100p", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "30a9", + "name": "Create SFB with increment setting", + "category": [ + "qdisc", + "sfb" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfb increment 0.1", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc sfb 1: root refcnt 2 rehash 600s db 60s.*increment 0.1", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "239a", + "name": "Create SFB with decrement setting", + "category": [ + "qdisc", + "sfb" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfb decrement 0.1", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc sfb 1: root refcnt 2 rehash 600s db 60s.*decrement 0.1", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "9301", + "name": "Create SFB with penalty_rate setting", + "category": [ + "qdisc", + "sfb" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfb penalty_rate 4000", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc sfb 1: root refcnt 2 rehash 600s db 60s.*penalty_rate 4000pps", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "2a01", + "name": "Create SFB with penalty_burst setting", + "category": [ + "qdisc", + "sfb" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfb penalty_burst 64", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc sfb 1: root refcnt 2 rehash 600s db 60s.*penalty_burst 64p", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "3209", + "name": "Change SFB with rehash setting", + "category": [ + "qdisc", + "sfb" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root sfb penalty_burst 64" + ], + "cmdUnderTest": "$TC qdisc change dev $DUMMY handle 1: root sfb rehash 100", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc sfb 1: root refcnt 2 rehash 100ms db 60s", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "5447", + "name": "Show SFB class", + "category": [ + "qdisc", + "sfb" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfb", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $DUMMY", + "matchPattern": "class sfb 1:", + "matchCount": "0", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + } +]
Test 7482: Create SFQ with default setting Test c186: Create SFQ with limit setting Test ae23: Create SFQ with perturb setting Test a430: Create SFQ with quantum setting Test 4539: Create SFQ with divisor setting Test b089: Create SFQ with flows setting Test 99a0: Create SFQ with depth setting Test 7389: Create SFQ with headdrop setting Test 6472: Create SFQ with redflowlimit setting Test 8929: Show SFQ class
Signed-off-by: Zhengchao Shao shaozhengchao@huawei.com --- .../tc-testing/tc-tests/qdiscs/sfq.json | 232 ++++++++++++++++++ 1 file changed, 232 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfq.json
diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfq.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfq.json new file mode 100644 index 000000000000..b6be718a174a --- /dev/null +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfq.json @@ -0,0 +1,232 @@ +[ + { + "id": "7482", + "name": "Create SFQ with default setting", + "category": [ + "qdisc", + "sfq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfq", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc sfq 1: root refcnt [0-9]+ limit 127p quantum.*depth 127 divisor 1024", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "c186", + "name": "Create SFQ with limit setting", + "category": [ + "qdisc", + "sfq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfq limit 8", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc sfq 1: root refcnt [0-9]+ limit 8p", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "ae23", + "name": "Create SFQ with perturb setting", + "category": [ + "qdisc", + "sfq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfq perturb 10", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "depth 127 divisor 1024 perturb 10sec", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "a430", + "name": "Create SFQ with quantum setting", + "category": [ + "qdisc", + "sfq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfq quantum 9000", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc sfq 1: root refcnt [0-9]+ limit 127p quantum 9000b depth 127 divisor 1024", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "4539", + "name": "Create SFQ with divisor setting", + "category": [ + "qdisc", + "sfq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfq divisor 512", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc sfq 1: root refcnt [0-9]+ limit 127p quantum 1514b depth 127 divisor 512", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "b089", + "name": "Create SFQ with flows setting", + "category": [ + "qdisc", + "sfq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfq flows 20", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc sfq 1: root refcnt", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "99a0", + "name": "Create SFQ with depth setting", + "category": [ + "qdisc", + "sfq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfq depth 64", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc sfq 1: root refcnt [0-9]+ limit 127p quantum 1514b depth 64 divisor 1024", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "7389", + "name": "Create SFQ with headdrop setting", + "category": [ + "qdisc", + "sfq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfq headdrop", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc sfq 1: root refcnt [0-9]+ limit 127p quantum 1514b depth 127 headdrop divisor 1024", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "6472", + "name": "Create SFQ with redflowlimit setting", + "category": [ + "qdisc", + "sfq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfq redflowlimit 100000 min 8000 max 60000 probability 0.20 ecn headdrop", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc sfq 1: root refcnt [0-9]+ limit 127p quantum 1514b depth 127 headdrop divisor 1024 ewma 6 min 8000b max 60000b probability 0.2 ecn", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "8929", + "name": "Show SFQ class", + "category": [ + "qdisc", + "sfq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfq", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $DUMMY", + "matchPattern": "class sfq 1:", + "matchCount": "0", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + } +]
Test 283e: Create skbprio with default setting Test c086: Create skbprio with limit setting Test 6733: Change skbprio with limit setting Test 2958: Show skbprio class
Signed-off-by: Zhengchao Shao shaozhengchao@huawei.com --- .../tc-testing/tc-tests/qdiscs/skbprio.json | 95 +++++++++++++++++++ 1 file changed, 95 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/skbprio.json
diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/skbprio.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/skbprio.json new file mode 100644 index 000000000000..5766045c9d33 --- /dev/null +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/skbprio.json @@ -0,0 +1,95 @@ +[ + { + "id": "283e", + "name": "Create skbprio with default setting", + "category": [ + "qdisc", + "skbprio" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root skbprio", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc skbprio 1: root refcnt [0-9]+ limit 64", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "c086", + "name": "Create skbprio with limit setting", + "category": [ + "qdisc", + "skbprio" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root skbprio limit 1", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc skbprio 1: root refcnt [0-9]+ limit 1", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "6733", + "name": "Change skbprio with limit setting", + "category": [ + "qdisc", + "skbprio" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root skbprio" + ], + "cmdUnderTest": "$TC qdisc change dev $DUMMY handle 1: root skbprio limit 32", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc skbprio 1: root refcnt [0-9]+ limit 32", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "2958", + "name": "Show skbprio class", + "category": [ + "qdisc", + "skbprio" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root skbprio", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $DUMMY", + "matchPattern": "class skbprio 1:", + "matchCount": "64", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + } +]
Test ba39: Add taprio Qdisc to multi-queue device (8 queues) Test 9462: Add taprio Qdisc with multiple sched-entry Test 8d92: Add taprio Qdisc with txtime-delay Test d092: Delete taprio Qdisc with valid handle Test 8471: Show taprio class Test 0a85: Add taprio Qdisc to single-queue device
Signed-off-by: Zhengchao Shao shaozhengchao@huawei.com --- .../tc-testing/tc-tests/qdiscs/taprio.json | 135 ++++++++++++++++++ 1 file changed, 135 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/taprio.json
diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/taprio.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/taprio.json new file mode 100644 index 000000000000..a44455372646 --- /dev/null +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/taprio.json @@ -0,0 +1,135 @@ +[ + { + "id": "ba39", + "name": "Add taprio Qdisc to multi-queue device (8 queues)", + "category": [ + "qdisc", + "taprio" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "echo "1 1 8" > /sys/bus/netdevsim/new_device" + ], + "cmdUnderTest": "$TC qdisc add dev $ETH root handle 1: taprio num_tc 3 map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 queues 1@0 1@0 1@0 base-time 1000000000 sched-entry S 01 300000 flags 0x1 clockid CLOCK_TAI", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $ETH", + "matchPattern": "qdisc taprio 1: root refcnt [0-9]+ tc 3 map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2", + "matchCount": "1", + "teardown": [ + "echo "1" > /sys/bus/netdevsim/del_device" + ] + }, + { + "id": "9462", + "name": "Add taprio Qdisc with multiple sched-entry", + "category": [ + "qdisc", + "taprio" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "echo "1 1 8" > /sys/bus/netdevsim/new_device" + ], + "cmdUnderTest": "$TC qdisc add dev $ETH root handle 1: taprio num_tc 3 map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 queues 1@0 1@0 1@0 base-time 1000000000 sched-entry S 01 300000 sched-entry S 03 300000 sched-entry S 04 400000 flags 0x1 clockid CLOCK_TAI", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $ETH", + "matchPattern": "index [0-9]+ cmd S gatemask 0x[0-9]+ interval [0-9]+00000", + "matchCount": "3", + "teardown": [ + "echo "1" > /sys/bus/netdevsim/del_device" + ] + }, + { + "id": "8d92", + "name": "Add taprio Qdisc with txtime-delay", + "category": [ + "qdisc", + "taprio" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "echo "1 1 8" > /sys/bus/netdevsim/new_device" + ], + "cmdUnderTest": "$TC qdisc add dev $ETH root handle 1: taprio num_tc 3 map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 queues 1@0 1@0 1@0 base-time 1000000000 sched-entry S 01 300000 flags 0x1 txtime-delay 500000 clockid CLOCK_TAI", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $ETH", + "matchPattern": "clockid TAI flags 0x1 txtime delay 500000", + "matchCount": "1", + "teardown": [ + "echo "1" > /sys/bus/netdevsim/del_device" + ] + }, + { + "id": "d092", + "name": "Delete taprio Qdisc with valid handle", + "category": [ + "qdisc", + "taprio" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "echo "1 1 8" > /sys/bus/netdevsim/new_device", + "$TC qdisc add dev $ETH root handle 1: taprio num_tc 3 map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 queues 1@0 1@0 1@0 base-time 1000000000 sched-entry S 01 300000 flags 0x1 clockid CLOCK_TAI" + ], + "cmdUnderTest": "$TC qdisc del dev $ETH root handle 1:", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $ETH", + "matchPattern": "qdisc taprio 1: root refcnt", + "matchCount": "0", + "teardown": [ + "echo "1" > /sys/bus/netdevsim/del_device" + ] + }, + { + "id": "8471", + "name": "Show taprio class", + "category": [ + "qdisc", + "taprio" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "echo "1 1 8" > /sys/bus/netdevsim/new_device" + ], + "cmdUnderTest": "$TC qdisc add dev $ETH root handle 1: taprio num_tc 3 map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 queues 1@0 1@0 1@0 base-time 1000000000 sched-entry S 01 300000 flags 0x1 clockid CLOCK_TAI", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $ETH", + "matchPattern": "class taprio 1:[0-9]+ root leaf 1:", + "matchCount": "8", + "teardown": [ + "echo "1" > /sys/bus/netdevsim/del_device" + ] + }, + { + "id": "0a85", + "name": "Add taprio Qdisc to single-queue device", + "category": [ + "qdisc", + "taprio" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "echo "1 1" > /sys/bus/netdevsim/new_device" + ], + "cmdUnderTest": "$TC qdisc add dev $ETH root handle 1: taprio num_tc 3 map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 queues 1@0 1@0 1@0 base-time 1000000000 sched-entry S 01 300000 flags 0x1 clockid CLOCK_TAI", + "expExitCode": "2", + "verifyCmd": "$TC qdisc show dev $ETH", + "matchPattern": "qdisc taprio 1: root refcnt", + "matchCount": "0", + "teardown": [ + "echo "1" > /sys/bus/netdevsim/del_device" + ] + } +]
Test 6430: Create TBF with default setting Test 0518: Create TBF with mtu setting Test 320a: Create TBF with peakrate setting Test 239b: Create TBF with latency setting Test c975: Create TBF with overhead setting Test 948c: Create TBF with linklayer setting Test 3549: Replace TBF with mtu Test f948: Change TBF with latency time Test 2348: Show TBF class
Signed-off-by: Zhengchao Shao shaozhengchao@huawei.com --- .../tc-testing/tc-tests/qdiscs/tbf.json | 211 ++++++++++++++++++ 1 file changed, 211 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/tbf.json
diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/tbf.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/tbf.json new file mode 100644 index 000000000000..a4b3dfe51ff5 --- /dev/null +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/tbf.json @@ -0,0 +1,211 @@ +[ + { + "id": "6430", + "name": "Create TBF with default setting", + "category": [ + "qdisc", + "tbf" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root tbf limit 1000 burst 1500 rate 10000", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc tbf 1: root refcnt [0-9]+ rate 10Kbit burst 1500b limit 1000b", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "0518", + "name": "Create TBF with mtu setting", + "category": [ + "qdisc", + "tbf" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root tbf limit 1000 burst 1500 rate 20000 mtu 2048", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc tbf 1: root refcnt [0-9]+ rate 20Kbit burst 1500b limit 1000b", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "320a", + "name": "Create TBF with peakrate setting", + "category": [ + "qdisc", + "tbf" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root tbf limit 1000 burst 1500 rate 20000 mtu 1510 peakrate 30000", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc tbf 1: root refcnt [0-9]+ rate 20Kbit burst 1500b peakrate 30Kbit minburst.*limit 1000b", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "239b", + "name": "Create TBF with latency setting", + "category": [ + "qdisc", + "tbf" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root tbf burst 1500 rate 20000 latency 100ms", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc tbf 1: root refcnt [0-9]+ rate 20Kbit burst 1500b lat 100ms", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "c975", + "name": "Create TBF with overhead setting", + "category": [ + "qdisc", + "tbf" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root tbf limit 1000 burst 1500 rate 20000 overhead 300", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc tbf 1: root refcnt [0-9]+ rate 20Kbit burst 1800b limit 1000b overhead 300", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "948c", + "name": "Create TBF with linklayer setting", + "category": [ + "qdisc", + "tbf" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root tbf limit 1000 burst 1500 rate 20000 linklayer atm", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc tbf 1: root refcnt [0-9]+ rate 20Kbit burst 1696b limit 1000b linklayer atm", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "3549", + "name": "Replace TBF with mtu", + "category": [ + "qdisc", + "tbf" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root tbf limit 1000 burst 1500 rate 20000 linklayer atm" + ], + "cmdUnderTest": "$TC qdisc replace dev $DUMMY handle 1: root tbf limit 1000 burst 1500 rate 20000 linklayer ethernet", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc tbf 1: root refcnt [0-9]+ rate 20Kbit burst 1500b limit 1000b", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "f948", + "name": "Change TBF with latency time", + "category": [ + "qdisc", + "tbf" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root tbf burst 1500 rate 20000 latency 10ms" + ], + "cmdUnderTest": "$TC qdisc change dev $DUMMY handle 1: root tbf burst 1500 rate 20000 latency 200ms", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc tbf 1: root refcnt [0-9]+ rate 20Kbit burst 1500b lat 200ms", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "2348", + "name": "Show TBF class", + "category": [ + "qdisc", + "tbf" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root tbf limit 1000 burst 1500 rate 10000", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $DUMMY", + "matchPattern": "class tbf.*parent 1:", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + } +]
Test 84a0: Create TEQL with default setting Test 7734: Create TEQL with multiple device Test 34a9: Delete TEQL with valid handle Test 6289: Show TEQL stats
Signed-off-by: Zhengchao Shao shaozhengchao@huawei.com --- .../tc-testing/tc-tests/qdiscs/teql.json | 97 +++++++++++++++++++ 1 file changed, 97 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/teql.json
diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/teql.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/teql.json new file mode 100644 index 000000000000..0082be0e93ac --- /dev/null +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/teql.json @@ -0,0 +1,97 @@ +[ + { + "id": "84a0", + "name": "Create TEQL with default setting", + "category": [ + "qdisc", + "teql" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root teql0", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc teql0 1: root refcnt", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "7734", + "name": "Create TEQL with multiple device", + "category": [ + "qdisc", + "teql" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "echo "1 1 4" > /sys/bus/netdevsim/new_device", + "$TC qdisc add dev $ETH root handle 1: teql0" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root teql0", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc teql0 1: root refcnt", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "echo "1" > /sys/bus/netdevsim/del_device", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "34a9", + "name": "Delete TEQL with valid handle", + "category": [ + "qdisc", + "teql" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root teql0" + ], + "cmdUnderTest": "$TC qdisc del dev $DUMMY handle 1: root", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc teql0 1: root refcnt", + "matchCount": "0", + "teardown": [ + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "6289", + "name": "Show TEQL stats", + "category": [ + "qdisc", + "teql" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root teql0", + "expExitCode": "0", + "verifyCmd": "$TC -s qdisc show dev $DUMMY", + "matchPattern": "qdisc teql0 1: root refcnt", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + } +]
On Wed, 21 Sep 2022 10:50:37 +0800 Zhengchao Shao wrote:
For this patchset, test cases of the qdisc modules are added to the tc-testing test suite.
Victor, Jamal, pls LMK if you'd like more time to review otherwise I'd love to apply these this evening. Our patch queue length is hovering between unreasonable and crazy :(
On Thu, Sep 22, 2022 at 4:40 PM Jakub Kicinski kuba@kernel.org wrote:
On Wed, 21 Sep 2022 10:50:37 +0800 Zhengchao Shao wrote:
For this patchset, test cases of the qdisc modules are added to the tc-testing test suite.
Victor, Jamal, pls LMK if you'd like more time to review otherwise I'd love to apply these this evening. Our patch queue length is hovering between unreasonable and crazy :(
There's some issue with this patchset - something was oopsing; could be an issue on our setup. Victor is looking into it.
Tests are good though - and we do review them and run them before acking...
cheers, jamal
On Thu, 22 Sep 2022 17:06:02 -0400 Jamal Hadi Salim wrote:
There's some issue with this patchset - something was oopsing; could be an issue on our setup. Victor is looking into it.
Tests are good though - and we do review them and run them before acking...
Roger that, I'll take the 18 part set since it looks acked and hold off on these.
On 20/09/2022 23:50, Zhengchao Shao wrote:
For this patchset, test cases of the qdisc modules are added to the tc-testing test suite.
After a test case is added locally, the test result is as follows:
./tdc.py -c atm ok 1 7628 - Create ATM with default setting ok 2 390a - Delete ATM with valid handle ok 3 32a0 - Show ATM class ok 4 6310 - Dump ATM stats
./tdc.py -c choke ok 1 8937 - Create CHOKE with default setting ok 2 48c0 - Create CHOKE with min packet setting ok 3 38c1 - Create CHOKE with max packet setting ok 4 234a - Create CHOKE with ecn setting ok 5 4380 - Create CHOKE with burst setting ok 6 48c7 - Delete CHOKE with valid handle ok 7 4398 - Replace CHOKE with min setting ok 8 0301 - Change CHOKE with limit setting
./tdc.py -c codel ok 1 983a - Create CODEL with default setting ok 2 38aa - Create CODEL with limit packet setting ok 3 9178 - Create CODEL with target setting ok 4 78d1 - Create CODEL with interval setting ok 5 238a - Create CODEL with ecn setting ok 6 939c - Create CODEL with ce_threshold setting ok 7 8380 - Delete CODEL with valid handle ok 8 289c - Replace CODEL with limit setting ok 9 0648 - Change CODEL with limit setting
./tdc.py -c etf ok 1 34ba - Create ETF with default setting ok 2 438f - Create ETF with delta nanos setting ok 3 9041 - Create ETF with deadline_mode setting ok 4 9a0c - Create ETF with skip_sock_check setting ok 5 2093 - Delete ETF with valid handle
./tdc.py -c fq ok 1 983b - Create FQ with default setting ok 2 38a1 - Create FQ with limit packet setting ok 3 0a18 - Create FQ with flow_limit setting ok 4 2390 - Create FQ with quantum setting ok 5 845b - Create FQ with initial_quantum setting ok 6 9398 - Create FQ with maxrate setting ok 7 342c - Create FQ with nopacing setting ok 8 6391 - Create FQ with refill_delay setting ok 9 238b - Create FQ with low_rate_threshold setting ok 10 7582 - Create FQ with orphan_mask setting ok 11 4894 - Create FQ with timer_slack setting ok 12 324c - Create FQ with ce_threshold setting ok 13 424a - Create FQ with horizon time setting ok 14 89e1 - Create FQ with horizon_cap setting ok 15 32e1 - Delete FQ with valid handle ok 16 49b0 - Replace FQ with limit setting ok 17 9478 - Change FQ with limit setting
./tdc.py -c gred ok 1 8942 - Create GRED with default setting ok 2 5783 - Create GRED with grio setting ok 3 8a09 - Create GRED with limit setting ok 4 48cb - Create GRED with ecn setting ok 5 763a - Change GRED setting ok 6 8309 - Show GRED class
./tdc.py -c hhf ok 1 4812 - Create HHF with default setting ok 2 8a92 - Create HHF with limit setting ok 3 3491 - Create HHF with quantum setting ok 4 ba04 - Create HHF with reset_timeout setting ok 5 4238 - Create HHF with admit_bytes setting ok 6 839f - Create HHF with evict_timeout setting ok 7 a044 - Create HHF with non_hh_weight setting ok 8 32f9 - Change HHF with limit setting ok 9 385e - Show HHF class
./tdc.py -c pfifo_fast ok 1 900c - Create pfifo_fast with default setting ok 2 7470 - Dump pfifo_fast stats ok 3 b974 - Replace pfifo_fast with different handle ok 4 3240 - Delete pfifo_fast with valid handle ok 5 4385 - Delete pfifo_fast with invalid handle
./tdc.py -c plug ok 1 3289 - Create PLUG with default setting ok 2 0917 - Create PLUG with block setting ok 3 483b - Create PLUG with release setting ok 4 4995 - Create PLUG with release_indefinite setting ok 5 389c - Create PLUG with limit setting ok 6 384a - Delete PLUG with valid handle ok 7 439a - Replace PLUG with limit setting ok 8 9831 - Change PLUG with limit setting
./tdc.py -c sfb ok 1 3294 - Create SFB with default setting ok 2 430a - Create SFB with rehash setting ok 3 3410 - Create SFB with db setting ok 4 49a0 - Create SFB with limit setting ok 5 1241 - Create SFB with max setting ok 6 3249 - Create SFB with target setting ok 7 30a9 - Create SFB with increment setting ok 8 239a - Create SFB with decrement setting ok 9 9301 - Create SFB with penalty_rate setting ok 10 2a01 - Create SFB with penalty_burst setting ok 11 3209 - Change SFB with rehash setting ok 12 5447 - Show SFB class
./tdc.py -c sfq ok 1 7482 - Create SFQ with default setting ok 2 c186 - Create SFQ with limit setting ok 3 ae23 - Create SFQ with perturb setting ok 4 a430 - Create SFQ with quantum setting ok 5 4539 - Create SFQ with divisor setting ok 6 b089 - Create SFQ with flows setting ok 7 99a0 - Create SFQ with depth setting ok 8 7389 - Create SFQ with headdrop setting ok 9 6472 - Create SFQ with redflowlimit setting ok 10 8929 - Show SFQ class
./tdc.py -c skbprio ok 1 283e - Create skbprio with default setting ok 2 c086 - Create skbprio with limit setting ok 3 6733 - Change skbprio with limit setting ok 4 2958 - Show skbprio class
./tdc.py -c taprio ok 1 ba39 - Add taprio Qdisc to multi-queue device (8 queues) ok 2 9462 - Add taprio Qdisc with multiple sched-entry ok 3 8d92 - Add taprio Qdisc with txtime-delay ok 4 d092 - Delete taprio Qdisc with valid handle ok 5 8471 - Show taprio class ok 6 0a85 - Add taprio Qdisc to single-queue device
./tdc.py -c tbf ok 1 6430 - Create TBF with default setting ok 2 0518 - Create TBF with mtu setting ok 3 320a - Create TBF with peakrate setting ok 4 239b - Create TBF with latency setting ok 5 c975 - Create TBF with overhead setting ok 6 948c - Create TBF with linklayer setting ok 7 3549 - Replace TBF with mtu ok 8 f948 - Change TBF with latency time ok 9 2348 - Show TBF class
./tdc.py -c teql ok 1 84a0 - Create TEQL with default setting ok 2 7734 - Create TEQL with multiple device ok 3 34a9 - Delete TEQL with valid handle ok 4 6289 - Show TEQL stats
v2: modify subject prefix
Zhengchao Shao (15): selftests/tc-testing: add selftests for atm qdisc selftests/tc-testing: add selftests for choke qdisc selftests/tc-testing: add selftests for codel qdisc selftests/tc-testing: add selftests for etf qdisc selftests/tc-testing: add selftests for fq qdisc selftests/tc-testing: add selftests for gred qdisc selftests/tc-testing: add selftests for hhf qdisc selftests/tc-testing: add selftests for pfifo_fast qdisc selftests/tc-testing: add selftests for plug qdisc selftests/tc-testing: add selftests for sfb qdisc selftests/tc-testing: add selftests for sfq qdisc selftests/tc-testing: add selftests for skbprio qdisc selftests/tc-testing: add selftests for taprio qdisc selftests/tc-testing: add selftests for tbf qdisc selftests/tc-testing: add selftests for teql qdisc
.../tc-testing/tc-tests/qdiscs/atm.json | 94 +++++ .../tc-testing/tc-tests/qdiscs/choke.json | 188 +++++++++ .../tc-testing/tc-tests/qdiscs/codel.json | 211 ++++++++++ .../tc-testing/tc-tests/qdiscs/etf.json | 117 ++++++ .../tc-testing/tc-tests/qdiscs/fq.json | 395 ++++++++++++++++++ .../tc-testing/tc-tests/qdiscs/gred.json | 164 ++++++++ .../tc-testing/tc-tests/qdiscs/hhf.json | 210 ++++++++++ .../tc-tests/qdiscs/pfifo_fast.json | 119 ++++++ .../tc-testing/tc-tests/qdiscs/plug.json | 188 +++++++++ .../tc-testing/tc-tests/qdiscs/sfb.json | 279 +++++++++++++ .../tc-testing/tc-tests/qdiscs/sfq.json | 232 ++++++++++ .../tc-testing/tc-tests/qdiscs/skbprio.json | 95 +++++ .../tc-testing/tc-tests/qdiscs/taprio.json | 135 ++++++ .../tc-testing/tc-tests/qdiscs/tbf.json | 211 ++++++++++ .../tc-testing/tc-tests/qdiscs/teql.json | 97 +++++ 15 files changed, 2735 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/atm.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/choke.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/codel.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/etf.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/fq.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/gred.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/hhf.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/pfifo_fast.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/plug.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfb.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfq.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/skbprio.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/taprio.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/tbf.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/teql.json
When adding new test case files, you should add any necessary configs needed to run them in tools/testing/selftests/tc-testing/config, if they aren't already there.
For example, your ATM patch should also add the following config options to that file:
CONFIG_ATM=y CONFIG_NET_SCH_ATM=m
On 2022/9/23 21:40, Victor Nogueira wrote:
On 20/09/2022 23:50, Zhengchao Shao wrote:
For this patchset, test cases of the qdisc modules are added to the tc-testing test suite.
After a test case is added locally, the test result is as follows:
./tdc.py -c atm ok 1 7628 - Create ATM with default setting ok 2 390a - Delete ATM with valid handle ok 3 32a0 - Show ATM class ok 4 6310 - Dump ATM stats
./tdc.py -c choke ok 1 8937 - Create CHOKE with default setting ok 2 48c0 - Create CHOKE with min packet setting ok 3 38c1 - Create CHOKE with max packet setting ok 4 234a - Create CHOKE with ecn setting ok 5 4380 - Create CHOKE with burst setting ok 6 48c7 - Delete CHOKE with valid handle ok 7 4398 - Replace CHOKE with min setting ok 8 0301 - Change CHOKE with limit setting
./tdc.py -c codel ok 1 983a - Create CODEL with default setting ok 2 38aa - Create CODEL with limit packet setting ok 3 9178 - Create CODEL with target setting ok 4 78d1 - Create CODEL with interval setting ok 5 238a - Create CODEL with ecn setting ok 6 939c - Create CODEL with ce_threshold setting ok 7 8380 - Delete CODEL with valid handle ok 8 289c - Replace CODEL with limit setting ok 9 0648 - Change CODEL with limit setting
./tdc.py -c etf ok 1 34ba - Create ETF with default setting ok 2 438f - Create ETF with delta nanos setting ok 3 9041 - Create ETF with deadline_mode setting ok 4 9a0c - Create ETF with skip_sock_check setting ok 5 2093 - Delete ETF with valid handle
./tdc.py -c fq ok 1 983b - Create FQ with default setting ok 2 38a1 - Create FQ with limit packet setting ok 3 0a18 - Create FQ with flow_limit setting ok 4 2390 - Create FQ with quantum setting ok 5 845b - Create FQ with initial_quantum setting ok 6 9398 - Create FQ with maxrate setting ok 7 342c - Create FQ with nopacing setting ok 8 6391 - Create FQ with refill_delay setting ok 9 238b - Create FQ with low_rate_threshold setting ok 10 7582 - Create FQ with orphan_mask setting ok 11 4894 - Create FQ with timer_slack setting ok 12 324c - Create FQ with ce_threshold setting ok 13 424a - Create FQ with horizon time setting ok 14 89e1 - Create FQ with horizon_cap setting ok 15 32e1 - Delete FQ with valid handle ok 16 49b0 - Replace FQ with limit setting ok 17 9478 - Change FQ with limit setting
./tdc.py -c gred ok 1 8942 - Create GRED with default setting ok 2 5783 - Create GRED with grio setting ok 3 8a09 - Create GRED with limit setting ok 4 48cb - Create GRED with ecn setting ok 5 763a - Change GRED setting ok 6 8309 - Show GRED class
./tdc.py -c hhf ok 1 4812 - Create HHF with default setting ok 2 8a92 - Create HHF with limit setting ok 3 3491 - Create HHF with quantum setting ok 4 ba04 - Create HHF with reset_timeout setting ok 5 4238 - Create HHF with admit_bytes setting ok 6 839f - Create HHF with evict_timeout setting ok 7 a044 - Create HHF with non_hh_weight setting ok 8 32f9 - Change HHF with limit setting ok 9 385e - Show HHF class
./tdc.py -c pfifo_fast ok 1 900c - Create pfifo_fast with default setting ok 2 7470 - Dump pfifo_fast stats ok 3 b974 - Replace pfifo_fast with different handle ok 4 3240 - Delete pfifo_fast with valid handle ok 5 4385 - Delete pfifo_fast with invalid handle
./tdc.py -c plug ok 1 3289 - Create PLUG with default setting ok 2 0917 - Create PLUG with block setting ok 3 483b - Create PLUG with release setting ok 4 4995 - Create PLUG with release_indefinite setting ok 5 389c - Create PLUG with limit setting ok 6 384a - Delete PLUG with valid handle ok 7 439a - Replace PLUG with limit setting ok 8 9831 - Change PLUG with limit setting
./tdc.py -c sfb ok 1 3294 - Create SFB with default setting ok 2 430a - Create SFB with rehash setting ok 3 3410 - Create SFB with db setting ok 4 49a0 - Create SFB with limit setting ok 5 1241 - Create SFB with max setting ok 6 3249 - Create SFB with target setting ok 7 30a9 - Create SFB with increment setting ok 8 239a - Create SFB with decrement setting ok 9 9301 - Create SFB with penalty_rate setting ok 10 2a01 - Create SFB with penalty_burst setting ok 11 3209 - Change SFB with rehash setting ok 12 5447 - Show SFB class
./tdc.py -c sfq ok 1 7482 - Create SFQ with default setting ok 2 c186 - Create SFQ with limit setting ok 3 ae23 - Create SFQ with perturb setting ok 4 a430 - Create SFQ with quantum setting ok 5 4539 - Create SFQ with divisor setting ok 6 b089 - Create SFQ with flows setting ok 7 99a0 - Create SFQ with depth setting ok 8 7389 - Create SFQ with headdrop setting ok 9 6472 - Create SFQ with redflowlimit setting ok 10 8929 - Show SFQ class
./tdc.py -c skbprio ok 1 283e - Create skbprio with default setting ok 2 c086 - Create skbprio with limit setting ok 3 6733 - Change skbprio with limit setting ok 4 2958 - Show skbprio class
./tdc.py -c taprio ok 1 ba39 - Add taprio Qdisc to multi-queue device (8 queues) ok 2 9462 - Add taprio Qdisc with multiple sched-entry ok 3 8d92 - Add taprio Qdisc with txtime-delay ok 4 d092 - Delete taprio Qdisc with valid handle ok 5 8471 - Show taprio class ok 6 0a85 - Add taprio Qdisc to single-queue device
./tdc.py -c tbf ok 1 6430 - Create TBF with default setting ok 2 0518 - Create TBF with mtu setting ok 3 320a - Create TBF with peakrate setting ok 4 239b - Create TBF with latency setting ok 5 c975 - Create TBF with overhead setting ok 6 948c - Create TBF with linklayer setting ok 7 3549 - Replace TBF with mtu ok 8 f948 - Change TBF with latency time ok 9 2348 - Show TBF class
./tdc.py -c teql ok 1 84a0 - Create TEQL with default setting ok 2 7734 - Create TEQL with multiple device ok 3 34a9 - Delete TEQL with valid handle ok 4 6289 - Show TEQL stats
v2: modify subject prefix
Zhengchao Shao (15): selftests/tc-testing: add selftests for atm qdisc selftests/tc-testing: add selftests for choke qdisc selftests/tc-testing: add selftests for codel qdisc selftests/tc-testing: add selftests for etf qdisc selftests/tc-testing: add selftests for fq qdisc selftests/tc-testing: add selftests for gred qdisc selftests/tc-testing: add selftests for hhf qdisc selftests/tc-testing: add selftests for pfifo_fast qdisc selftests/tc-testing: add selftests for plug qdisc selftests/tc-testing: add selftests for sfb qdisc selftests/tc-testing: add selftests for sfq qdisc selftests/tc-testing: add selftests for skbprio qdisc selftests/tc-testing: add selftests for taprio qdisc selftests/tc-testing: add selftests for tbf qdisc selftests/tc-testing: add selftests for teql qdisc
.../tc-testing/tc-tests/qdiscs/atm.json | 94 +++++ .../tc-testing/tc-tests/qdiscs/choke.json | 188 +++++++++ .../tc-testing/tc-tests/qdiscs/codel.json | 211 ++++++++++ .../tc-testing/tc-tests/qdiscs/etf.json | 117 ++++++ .../tc-testing/tc-tests/qdiscs/fq.json | 395 ++++++++++++++++++ .../tc-testing/tc-tests/qdiscs/gred.json | 164 ++++++++ .../tc-testing/tc-tests/qdiscs/hhf.json | 210 ++++++++++ .../tc-tests/qdiscs/pfifo_fast.json | 119 ++++++ .../tc-testing/tc-tests/qdiscs/plug.json | 188 +++++++++ .../tc-testing/tc-tests/qdiscs/sfb.json | 279 +++++++++++++ .../tc-testing/tc-tests/qdiscs/sfq.json | 232 ++++++++++ .../tc-testing/tc-tests/qdiscs/skbprio.json | 95 +++++ .../tc-testing/tc-tests/qdiscs/taprio.json | 135 ++++++ .../tc-testing/tc-tests/qdiscs/tbf.json | 211 ++++++++++ .../tc-testing/tc-tests/qdiscs/teql.json | 97 +++++ 15 files changed, 2735 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/atm.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/choke.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/codel.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/etf.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/fq.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/gred.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/hhf.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/pfifo_fast.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/plug.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfb.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfq.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/skbprio.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/taprio.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/tbf.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/teql.json
When adding new test case files, you should add any necessary configs needed to run them in tools/testing/selftests/tc-testing/config, if they aren't already there.
For example, your ATM patch should also add the following config options to that file:
CONFIG_ATM=y CONFIG_NET_SCH_ATM=m
Hi Victor： Thank you for your testing. I will add config in V3. It might be better to generate executable test suites based on kernel config. However, this feature does not seem to be supported currently. Or This feature can be added later.
Zhengchao Shao
linux-kselftest-mirror@lists.linaro.org
-
Jakub Kicinski -
Jamal Hadi Salim -
shaozhengchao -
Victor Nogueira -
Zhengchao Shao