Nolibc has support for riscv32. But the testsuite did not allow to test it so far. Add a test configuration.
Signed-off-by: Thomas Weißschuh linux@weissschuh.net --- Thomas Weißschuh (6): tools/nolibc: add support for waitid() selftests/nolibc: use waitid() over waitpid() selftests/nolibc: use a pipe to in vfprintf tests selftests/nolibc: skip tests for unimplemented syscalls selftests/nolibc: rename riscv to riscv64 selftests/nolibc: add configurations for riscv32
tools/include/nolibc/sys.h | 18 ++++++++++++ tools/testing/selftests/nolibc/Makefile | 11 +++++++ tools/testing/selftests/nolibc/nolibc-test.c | 44 ++++++++++++++++------------ tools/testing/selftests/nolibc/run-tests.sh | 2 +- 4 files changed, 56 insertions(+), 19 deletions(-) --- base-commit: 499551201b5f4fd3c0618a3e95e3d0d15ea18f31 change-id: 20241219-nolibc-rv32-cff8a3e22394
Best regards,
waitid() is the modern variant of the family of wait-like syscalls. Some architectures have dropped support for wait(), wait4() and waitpid() but all of them support waitid(). It is more flexible and easier to use than the older ones.
Signed-off-by: Thomas Weißschuh linux@weissschuh.net --- tools/include/nolibc/sys.h | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)
diff --git a/tools/include/nolibc/sys.h b/tools/include/nolibc/sys.h index 7b82bc3cf107439a3f09f98b99d4d540ffb9ba2a..d4a5c2399a66b200ebf7ab249569cce2285481a5 100644 --- a/tools/include/nolibc/sys.h +++ b/tools/include/nolibc/sys.h @@ -23,6 +23,7 @@ #include <linux/prctl.h> #include <linux/resource.h> #include <linux/utsname.h> +#include <linux/signal.h>
#include "arch.h" #include "errno.h" @@ -1225,6 +1226,23 @@ pid_t waitpid(pid_t pid, int *status, int options) }
+/* + * int waitid(idtype_t idtype, id_t id, siginfo_t *infop, int options); + */ + +static __attribute__((unused)) +int sys_waitid(int which, pid_t pid, siginfo_t *infop, int options, struct rusage *rusage) +{ + return my_syscall5(__NR_waitid, which, pid, infop, options, rusage); +} + +static __attribute__((unused)) +int waitid(int which, pid_t pid, siginfo_t *infop, int options) +{ + return __sysret(sys_waitid(which, pid, infop, options, NULL)); +} + + /* * ssize_t write(int fd, const void *buf, size_t count); */
Hi Thomas!
On Sat, Dec 21, 2024 at 03:44:28PM +0100, Thomas Weißschuh wrote:
waitid() is the modern variant of the family of wait-like syscalls. Some architectures have dropped support for wait(), wait4() and waitpid() but all of them support waitid(). It is more flexible and easier to use than the older ones.
I'm generally fine with the series, but I'm starting to get concerned that some simple applications that used to rely on wait() or waitpid() will not work on this architecture. Just like we did for some early syscalls that got replaced (e.g. open->openat etc), I think we'll have to implement a default wrapper relying on waitid() for all these calls in this case, and maybe as well for lseek->llseek() btw, what do you think ?
The single fact that you've had to modify some of the nolibc-test code (which is supposed to be the application here) indicates that we're progressively going away from what applications need on certain archs. Ideally an application relying on long-established calls should continue to work unmodified.
Maybe it will be time for us to run an overall audit of arch-dependent syscalls we currently have, to make sure that the common ones continue to work fine there (and waitpid() definitely is as common a syscall as open() since it's the good old and portable one).
Cheers, Willy
Hi Willy!
On 2024-12-21 17:35:40+0100, Willy Tarreau wrote:
On Sat, Dec 21, 2024 at 03:44:28PM +0100, Thomas Weißschuh wrote:
waitid() is the modern variant of the family of wait-like syscalls. Some architectures have dropped support for wait(), wait4() and waitpid() but all of them support waitid(). It is more flexible and easier to use than the older ones.
I'm generally fine with the series, but I'm starting to get concerned that some simple applications that used to rely on wait() or waitpid() will not work on this architecture. Just like we did for some early syscalls that got replaced (e.g. open->openat etc), I think we'll have to implement a default wrapper relying on waitid() for all these calls in this case, and maybe as well for lseek->llseek() btw, what do you think ?
Indeed, it would be nice to have full compatibility. However there are more syscalls missing than wait() and lseek(). These are just the missing ones affecting nolibc-test. Adding wrappers will be more work. This series is only meant to ensure that the existing limited support does not regress.
We can add compatibility wrappers one after the other on top. I think Zhangjin implemented and proposed a few before, but a few of them ended up complicated.
The single fact that you've had to modify some of the nolibc-test code (which is supposed to be the application here) indicates that we're progressively going away from what applications need on certain archs. Ideally an application relying on long-established calls should continue to work unmodified.
Agreed.
Maybe it will be time for us to run an overall audit of arch-dependent syscalls we currently have, to make sure that the common ones continue to work fine there (and waitpid() definitely is as common a syscall as open() since it's the good old and portable one).
Isn't this what nolibc-test is already doing? Or do you also want to compare it to non-current kernel versions?
In general the special rv32 syscalls are not really architecture-dependent, they just dropped the "legacy" ones, especially all using 32bit timestamps.
Thomas
Hi Thomas!
On Sun, Dec 22, 2024 at 12:39:01PM +0100, Thomas Weißschuh wrote:
Maybe it will be time for us to run an overall audit of arch-dependent syscalls we currently have, to make sure that the common ones continue to work fine there (and waitpid() definitely is as common a syscall as open() since it's the good old and portable one).
Isn't this what nolibc-test is already doing?
My concern is that it might be progressively going away from this if we replace some standard syscalls with new ones that are cross-arch.
Or do you also want to compare it to non-current kernel versions?
I mean that we progressively replace old posix calls with new cross arch ones in the system (e.g. open->openat, waitpid->waitid etc) and normally it's a libc's role to preserve application-level compatibility by maintaining the mapping between standard ones and specific ones so that applications relying on standard ones continue to work, and that was one of the original goals of nolibc.
I have nothing against missing some calls in newly added architectures, of course, but when I'm seeing for example that we switch some of the lower layer tests to use a pipe because some call was not present, I tend to think that maybe we should first define what is the minimal set of working syscalls that the nolibc-test program requires to be usable on any arch.
In the current case, we seem to have to arbiter between pipe() and lseek() support for basic nolibc-test support. But maybe a new arch will be added for which it will be the opposite choice between the two. We may very well require both of them to work if needed, or either, at the risk of delaying support of a specific arch in the future, but that's fine.
Second we should have a new look at all our supported calls and check if some of them are present while the legacy calls they're supposed to replace is missing (which would be perfectly possible). For example if we had implemented waitpid() much later, it would have been perfectly possible that we'd only implement waitid() and miss waitpid() that applications expect.
Honestly it's not a particularly interesting job to do. That's why I'm mostly saying that we should just keep that in mind to be careful with new additions.
In general the special rv32 syscalls are not really architecture-dependent, they just dropped the "legacy" ones, especially all using 32bit timestamps.
I understand, and when adding a new arch we need to start with something. I just think that we should consider that for a new arch to switch from "in progress" to "working", it would require the legacy ones working on other archs to work on that one as well. My concern is that early boot tools would only build on certain archs but not all when all of them are supposed to be in a working state. When it fails everywhere that's fine, it just means we're missing some calls and the user is welcome to submit a patch. But when the user only tests on, say, x86 and arm, and someone relies on that to package kernels and discovers late that it fails on riscv for example, that's a problem. Note that I'm just making up examples, and not designating any particular issue.
Maybe it would be convenient to maintain a support matrix for the syscalls we currently support. It could look something like:
waitpid() x86: native arm: native riscv32: via waitid() foobar: not yet
open() ...
etc. I could try to work on such a thing if you're interested as well, but not now as I don't have the time at the moment.
Cheers, Willy
Newer archs like riscv32 don't provide waitpid() anymore. Switch to waitid() which is available everywhere.
Signed-off-by: Thomas Weißschuh linux@weissschuh.net --- tools/testing/selftests/nolibc/nolibc-test.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/tools/testing/selftests/nolibc/nolibc-test.c b/tools/testing/selftests/nolibc/nolibc-test.c index 6fba7025c5e3c002085862fdf6fa950da6000d6c..60c50968d3630e4909a5ecb2400770baaf7c2add 100644 --- a/tools/testing/selftests/nolibc/nolibc-test.c +++ b/tools/testing/selftests/nolibc/nolibc-test.c @@ -1323,7 +1323,8 @@ static int run_protection(int min __attribute__((unused)), int max __attribute__((unused))) { pid_t pid; - int llen = 0, status; + int llen = 0, ret; + siginfo_t siginfo = {}; struct rlimit rlimit = { 0, 0 };
llen += printf("0 -fstackprotector "); @@ -1361,10 +1362,11 @@ static int run_protection(int min __attribute__((unused)), return 1;
default: - pid = waitpid(pid, &status, 0); + ret = waitid(P_PID, pid, &siginfo, WEXITED);
- if (pid == -1 || !WIFSIGNALED(status) || WTERMSIG(status) != SIGABRT) { - llen += printf("waitpid()"); + if (ret != 0 || siginfo.si_signo != SIGCHLD || + siginfo.si_code != CLD_KILLED || siginfo.si_status != SIGABRT) { + llen += printf("waitid()"); result(llen, FAIL); return 1; }
Not all architectures implement lseek(), for example riscv32 only implements llseek() which is not equivalent to normal lseek(). Remove the need for lseek() by using a pipe instead.
Signed-off-by: Thomas Weißschuh linux@weissschuh.net --- tools/testing/selftests/nolibc/nolibc-test.c | 20 +++++++++----------- 1 file changed, 9 insertions(+), 11 deletions(-)
diff --git a/tools/testing/selftests/nolibc/nolibc-test.c b/tools/testing/selftests/nolibc/nolibc-test.c index 60c50968d3630e4909a5ecb2400770baaf7c2add..3685c13a9a6b8fd5110715b95ff323cdcb29481a 100644 --- a/tools/testing/selftests/nolibc/nolibc-test.c +++ b/tools/testing/selftests/nolibc/nolibc-test.c @@ -1229,19 +1229,20 @@ int run_stdlib(int min, int max)
static int expect_vfprintf(int llen, int c, const char *expected, const char *fmt, ...) { - int ret, fd; + int ret, pipefd[2]; ssize_t w, r; char buf[100]; FILE *memfile; va_list args;
- fd = open("/tmp", O_TMPFILE | O_EXCL | O_RDWR, 0600); - if (fd == -1) { - result(llen, SKIPPED); - return 0; + ret = pipe(pipefd); + if (ret == -1) { + llen += printf(" pipe() != %s", strerror(errno)); + result(llen, FAIL); + return 1; }
- memfile = fdopen(fd, "w+"); + memfile = fdopen(pipefd[1], "w"); if (!memfile) { result(llen, FAIL); return 1; @@ -1257,13 +1258,10 @@ static int expect_vfprintf(int llen, int c, const char *expected, const char *fm return 1; }
- fflush(memfile); - lseek(fd, 0, SEEK_SET); - - r = read(fd, buf, sizeof(buf) - 1); - fclose(memfile);
+ r = read(pipefd[0], buf, sizeof(buf) - 1); + if (r != w) { llen += printf(" written(%d) != read(%d)", (int)w, (int)r); result(llen, FAIL);
The riscv32 architecture is missing many of the older syscalls. Instead of providing wrappers for everything at once, introducing a lot of complexity, skip the tests for those syscalls for now.
Signed-off-by: Thomas Weißschuh linux@weissschuh.net --- tools/testing/selftests/nolibc/nolibc-test.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/tools/testing/selftests/nolibc/nolibc-test.c b/tools/testing/selftests/nolibc/nolibc-test.c index 3685c13a9a6b8fd5110715b95ff323cdcb29481a..0e0e3b48a8c3a6802c6989954b6f3a7c7258db43 100644 --- a/tools/testing/selftests/nolibc/nolibc-test.c +++ b/tools/testing/selftests/nolibc/nolibc-test.c @@ -302,7 +302,10 @@ int expect_syszr(int expr, int llen) { int ret = 0;
- if (expr) { + if (errno == ENOSYS) { + llen += printf(" = ENOSYS"); + result(llen, SKIPPED); + } else if (expr) { ret = 1; llen += printf(" = %d %s ", expr, errorname(errno)); result(llen, FAIL); @@ -342,7 +345,10 @@ int expect_sysne(int expr, int llen, int val) { int ret = 0;
- if (expr == val) { + if (errno == ENOSYS) { + llen += printf(" = ENOSYS"); + result(llen, SKIPPED); + } else if (expr == val) { ret = 1; llen += printf(" = %d %s ", expr, errorname(errno)); result(llen, FAIL); @@ -367,7 +373,9 @@ int expect_syserr2(int expr, int expret, int experr1, int experr2, int llen) int _errno = errno;
llen += printf(" = %d %s ", expr, errorname(_errno)); - if (expr != expret || (_errno != experr1 && _errno != experr2)) { + if (errno == ENOSYS) { + result(llen, SKIPPED); + } else if (expr != expret || (_errno != experr1 && _errno != experr2)) { ret = 1; if (experr2 == 0) llen += printf(" != (%d %s) ", expret, errorname(experr1));
riscv32 support is about the be added. To keep the naming clear and consistent with other architectures rename riscv to riscv64, as that is what it actually represents.
Signed-off-by: Thomas Weißschuh linux@weissschuh.net --- tools/testing/selftests/nolibc/Makefile | 6 ++++++ tools/testing/selftests/nolibc/run-tests.sh | 2 +- 2 files changed, 7 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/nolibc/Makefile b/tools/testing/selftests/nolibc/Makefile index e92e0b88586111072a0e043cb15f3b59cf42c3a6..78f47e85b389ac229ac13f3e7c8299fb3ec92197 100644 --- a/tools/testing/selftests/nolibc/Makefile +++ b/tools/testing/selftests/nolibc/Makefile @@ -43,6 +43,7 @@ cc-option = $(call __cc-option, $(CC),$(CLANG_CROSS_FLAGS),$(1),$(2)) # configure default variants for target kernel supported architectures XARCH_powerpc = ppc XARCH_mips = mips32le +XARCH_riscv = riscv64 XARCH = $(or $(XARCH_$(ARCH)),$(ARCH))
# map from user input variants to their kernel supported architectures @@ -51,6 +52,7 @@ ARCH_ppc64 = powerpc ARCH_ppc64le = powerpc ARCH_mips32le = mips ARCH_mips32be = mips +ARCH_riscv64 = riscv ARCH := $(or $(ARCH_$(XARCH)),$(XARCH))
# kernel image names by architecture @@ -65,6 +67,7 @@ IMAGE_ppc = vmlinux IMAGE_ppc64 = vmlinux IMAGE_ppc64le = arch/powerpc/boot/zImage IMAGE_riscv = arch/riscv/boot/Image +IMAGE_riscv64 = arch/riscv/boot/Image IMAGE_s390 = arch/s390/boot/bzImage IMAGE_loongarch = arch/loongarch/boot/vmlinuz.efi IMAGE = $(objtree)/$(IMAGE_$(XARCH)) @@ -82,6 +85,7 @@ DEFCONFIG_ppc = pmac32_defconfig DEFCONFIG_ppc64 = powernv_be_defconfig DEFCONFIG_ppc64le = powernv_defconfig DEFCONFIG_riscv = defconfig +DEFCONFIG_riscv64 = defconfig DEFCONFIG_s390 = defconfig DEFCONFIG_loongarch = defconfig DEFCONFIG = $(DEFCONFIG_$(XARCH)) @@ -104,6 +108,7 @@ QEMU_ARCH_ppc = ppc QEMU_ARCH_ppc64 = ppc64 QEMU_ARCH_ppc64le = ppc64 QEMU_ARCH_riscv = riscv64 +QEMU_ARCH_riscv64 = riscv64 QEMU_ARCH_s390 = s390x QEMU_ARCH_loongarch = loongarch64 QEMU_ARCH = $(QEMU_ARCH_$(XARCH)) @@ -130,6 +135,7 @@ QEMU_ARGS_ppc = -M g3beige -append "console=ttyS0 panic=-1 $(TEST:%=NOLIB QEMU_ARGS_ppc64 = -M powernv -append "console=hvc0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_ppc64le = -M powernv -append "console=hvc0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_riscv = -M virt -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_riscv64 = -M virt -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_s390 = -M s390-ccw-virtio -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_loongarch = -M virt -append "console=ttyS0,115200 panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS = -m 1G $(QEMU_ARGS_$(XARCH)) $(QEMU_ARGS_BIOS) $(QEMU_ARGS_EXTRA) diff --git a/tools/testing/selftests/nolibc/run-tests.sh b/tools/testing/selftests/nolibc/run-tests.sh index e7ecda4ae796fbf0d389f20144511e66ce4f0b30..caa1ae40fe9a2faf8931c299aacd19716227e2b8 100755 --- a/tools/testing/selftests/nolibc/run-tests.sh +++ b/tools/testing/selftests/nolibc/run-tests.sh @@ -17,7 +17,7 @@ perform_download=0 test_mode=system werror=1 llvm= -archs="i386 x86_64 arm64 arm mips32le mips32be ppc ppc64 ppc64le riscv s390 loongarch" +archs="i386 x86_64 arm64 arm mips32le mips32be ppc ppc64 ppc64le riscv64 s390 loongarch"
TEMP=$(getopt -o 'j:d:c:b:a:m:pelh' -n "$0" -- "$@")
On Sat, Dec 21, 2024 at 03:44:32PM +0100, Thomas Weißschuh wrote:
riscv32 support is about the be added. To keep the naming clear and consistent with other architectures rename riscv to riscv64, as that is what it actually represents.
Seems like a reasonable change.
Reviewed-by: Charlie Jenkins charlie@rivosinc.com Tested-by: Charlie Jenkins charlie@rivosinc.com
Signed-off-by: Thomas Weißschuh linux@weissschuh.net
tools/testing/selftests/nolibc/Makefile | 6 ++++++ tools/testing/selftests/nolibc/run-tests.sh | 2 +- 2 files changed, 7 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/nolibc/Makefile b/tools/testing/selftests/nolibc/Makefile index e92e0b88586111072a0e043cb15f3b59cf42c3a6..78f47e85b389ac229ac13f3e7c8299fb3ec92197 100644 --- a/tools/testing/selftests/nolibc/Makefile +++ b/tools/testing/selftests/nolibc/Makefile @@ -43,6 +43,7 @@ cc-option = $(call __cc-option, $(CC),$(CLANG_CROSS_FLAGS),$(1),$(2)) # configure default variants for target kernel supported architectures XARCH_powerpc = ppc XARCH_mips = mips32le +XARCH_riscv = riscv64 XARCH = $(or $(XARCH_$(ARCH)),$(ARCH)) # map from user input variants to their kernel supported architectures @@ -51,6 +52,7 @@ ARCH_ppc64 = powerpc ARCH_ppc64le = powerpc ARCH_mips32le = mips ARCH_mips32be = mips +ARCH_riscv64 = riscv ARCH := $(or $(ARCH_$(XARCH)),$(XARCH)) # kernel image names by architecture @@ -65,6 +67,7 @@ IMAGE_ppc = vmlinux IMAGE_ppc64 = vmlinux IMAGE_ppc64le = arch/powerpc/boot/zImage IMAGE_riscv = arch/riscv/boot/Image +IMAGE_riscv64 = arch/riscv/boot/Image IMAGE_s390 = arch/s390/boot/bzImage IMAGE_loongarch = arch/loongarch/boot/vmlinuz.efi IMAGE = $(objtree)/$(IMAGE_$(XARCH)) @@ -82,6 +85,7 @@ DEFCONFIG_ppc = pmac32_defconfig DEFCONFIG_ppc64 = powernv_be_defconfig DEFCONFIG_ppc64le = powernv_defconfig DEFCONFIG_riscv = defconfig +DEFCONFIG_riscv64 = defconfig DEFCONFIG_s390 = defconfig DEFCONFIG_loongarch = defconfig DEFCONFIG = $(DEFCONFIG_$(XARCH)) @@ -104,6 +108,7 @@ QEMU_ARCH_ppc = ppc QEMU_ARCH_ppc64 = ppc64 QEMU_ARCH_ppc64le = ppc64 QEMU_ARCH_riscv = riscv64 +QEMU_ARCH_riscv64 = riscv64 QEMU_ARCH_s390 = s390x QEMU_ARCH_loongarch = loongarch64 QEMU_ARCH = $(QEMU_ARCH_$(XARCH)) @@ -130,6 +135,7 @@ QEMU_ARGS_ppc = -M g3beige -append "console=ttyS0 panic=-1 $(TEST:%=NOLIB QEMU_ARGS_ppc64 = -M powernv -append "console=hvc0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_ppc64le = -M powernv -append "console=hvc0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_riscv = -M virt -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_riscv64 = -M virt -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_s390 = -M s390-ccw-virtio -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_loongarch = -M virt -append "console=ttyS0,115200 panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS = -m 1G $(QEMU_ARGS_$(XARCH)) $(QEMU_ARGS_BIOS) $(QEMU_ARGS_EXTRA) diff --git a/tools/testing/selftests/nolibc/run-tests.sh b/tools/testing/selftests/nolibc/run-tests.sh index e7ecda4ae796fbf0d389f20144511e66ce4f0b30..caa1ae40fe9a2faf8931c299aacd19716227e2b8 100755 --- a/tools/testing/selftests/nolibc/run-tests.sh +++ b/tools/testing/selftests/nolibc/run-tests.sh @@ -17,7 +17,7 @@ perform_download=0 test_mode=system werror=1 llvm= -archs="i386 x86_64 arm64 arm mips32le mips32be ppc ppc64 ppc64le riscv s390 loongarch" +archs="i386 x86_64 arm64 arm mips32le mips32be ppc ppc64 ppc64le riscv64 s390 loongarch" TEMP=$(getopt -o 'j:d:c:b:a:m:pelh' -n "$0" -- "$@")
-- 2.47.1
linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv
nolibc already supports riscv32. Wire it up in the testsuite.
Signed-off-by: Thomas Weißschuh linux@weissschuh.net --- tools/testing/selftests/nolibc/Makefile | 5 +++++ tools/testing/selftests/nolibc/run-tests.sh | 2 +- 2 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/nolibc/Makefile b/tools/testing/selftests/nolibc/Makefile index 78f47e85b389ac229ac13f3e7c8299fb3ec92197..7d14a7c0cb62608f328b251495264517d333db2e 100644 --- a/tools/testing/selftests/nolibc/Makefile +++ b/tools/testing/selftests/nolibc/Makefile @@ -52,6 +52,7 @@ ARCH_ppc64 = powerpc ARCH_ppc64le = powerpc ARCH_mips32le = mips ARCH_mips32be = mips +ARCH_riscv32 = riscv ARCH_riscv64 = riscv ARCH := $(or $(ARCH_$(XARCH)),$(XARCH))
@@ -67,6 +68,7 @@ IMAGE_ppc = vmlinux IMAGE_ppc64 = vmlinux IMAGE_ppc64le = arch/powerpc/boot/zImage IMAGE_riscv = arch/riscv/boot/Image +IMAGE_riscv32 = arch/riscv/boot/Image IMAGE_riscv64 = arch/riscv/boot/Image IMAGE_s390 = arch/s390/boot/bzImage IMAGE_loongarch = arch/loongarch/boot/vmlinuz.efi @@ -85,6 +87,7 @@ DEFCONFIG_ppc = pmac32_defconfig DEFCONFIG_ppc64 = powernv_be_defconfig DEFCONFIG_ppc64le = powernv_defconfig DEFCONFIG_riscv = defconfig +DEFCONFIG_riscv32 = rv32_defconfig DEFCONFIG_riscv64 = defconfig DEFCONFIG_s390 = defconfig DEFCONFIG_loongarch = defconfig @@ -108,6 +111,7 @@ QEMU_ARCH_ppc = ppc QEMU_ARCH_ppc64 = ppc64 QEMU_ARCH_ppc64le = ppc64 QEMU_ARCH_riscv = riscv64 +QEMU_ARCH_riscv32 = riscv32 QEMU_ARCH_riscv64 = riscv64 QEMU_ARCH_s390 = s390x QEMU_ARCH_loongarch = loongarch64 @@ -135,6 +139,7 @@ QEMU_ARGS_ppc = -M g3beige -append "console=ttyS0 panic=-1 $(TEST:%=NOLIB QEMU_ARGS_ppc64 = -M powernv -append "console=hvc0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_ppc64le = -M powernv -append "console=hvc0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_riscv = -M virt -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_riscv32 = -M virt -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_riscv64 = -M virt -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_s390 = -M s390-ccw-virtio -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_loongarch = -M virt -append "console=ttyS0,115200 panic=-1 $(TEST:%=NOLIBC_TEST=%)" diff --git a/tools/testing/selftests/nolibc/run-tests.sh b/tools/testing/selftests/nolibc/run-tests.sh index caa1ae40fe9a2faf8931c299aacd19716227e2b8..67fefc847d77165f817c3befa578cfa27e6f93d8 100755 --- a/tools/testing/selftests/nolibc/run-tests.sh +++ b/tools/testing/selftests/nolibc/run-tests.sh @@ -17,7 +17,7 @@ perform_download=0 test_mode=system werror=1 llvm= -archs="i386 x86_64 arm64 arm mips32le mips32be ppc ppc64 ppc64le riscv64 s390 loongarch" +archs="i386 x86_64 arm64 arm mips32le mips32be ppc ppc64 ppc64le riscv32 riscv64 s390 loongarch"
TEMP=$(getopt -o 'j:d:c:b:a:m:pelh' -n "$0" -- "$@")
On Sat, Dec 21, 2024 at 03:44:33PM +0100, Thomas Weißschuh wrote:
nolibc already supports riscv32. Wire it up in the testsuite.
Good addition!
Reviewed-by: Charlie Jenkins charlie@rivosinc.com Tested-by: Charlie Jenkins charlie@rivosinc.com
Signed-off-by: Thomas Weißschuh linux@weissschuh.net
tools/testing/selftests/nolibc/Makefile | 5 +++++ tools/testing/selftests/nolibc/run-tests.sh | 2 +- 2 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/nolibc/Makefile b/tools/testing/selftests/nolibc/Makefile index 78f47e85b389ac229ac13f3e7c8299fb3ec92197..7d14a7c0cb62608f328b251495264517d333db2e 100644 --- a/tools/testing/selftests/nolibc/Makefile +++ b/tools/testing/selftests/nolibc/Makefile @@ -52,6 +52,7 @@ ARCH_ppc64 = powerpc ARCH_ppc64le = powerpc ARCH_mips32le = mips ARCH_mips32be = mips +ARCH_riscv32 = riscv ARCH_riscv64 = riscv ARCH := $(or $(ARCH_$(XARCH)),$(XARCH)) @@ -67,6 +68,7 @@ IMAGE_ppc = vmlinux IMAGE_ppc64 = vmlinux IMAGE_ppc64le = arch/powerpc/boot/zImage IMAGE_riscv = arch/riscv/boot/Image +IMAGE_riscv32 = arch/riscv/boot/Image IMAGE_riscv64 = arch/riscv/boot/Image IMAGE_s390 = arch/s390/boot/bzImage IMAGE_loongarch = arch/loongarch/boot/vmlinuz.efi @@ -85,6 +87,7 @@ DEFCONFIG_ppc = pmac32_defconfig DEFCONFIG_ppc64 = powernv_be_defconfig DEFCONFIG_ppc64le = powernv_defconfig DEFCONFIG_riscv = defconfig +DEFCONFIG_riscv32 = rv32_defconfig DEFCONFIG_riscv64 = defconfig DEFCONFIG_s390 = defconfig DEFCONFIG_loongarch = defconfig @@ -108,6 +111,7 @@ QEMU_ARCH_ppc = ppc QEMU_ARCH_ppc64 = ppc64 QEMU_ARCH_ppc64le = ppc64 QEMU_ARCH_riscv = riscv64 +QEMU_ARCH_riscv32 = riscv32 QEMU_ARCH_riscv64 = riscv64 QEMU_ARCH_s390 = s390x QEMU_ARCH_loongarch = loongarch64 @@ -135,6 +139,7 @@ QEMU_ARGS_ppc = -M g3beige -append "console=ttyS0 panic=-1 $(TEST:%=NOLIB QEMU_ARGS_ppc64 = -M powernv -append "console=hvc0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_ppc64le = -M powernv -append "console=hvc0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_riscv = -M virt -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_riscv32 = -M virt -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_riscv64 = -M virt -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_s390 = -M s390-ccw-virtio -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_loongarch = -M virt -append "console=ttyS0,115200 panic=-1 $(TEST:%=NOLIBC_TEST=%)" diff --git a/tools/testing/selftests/nolibc/run-tests.sh b/tools/testing/selftests/nolibc/run-tests.sh index caa1ae40fe9a2faf8931c299aacd19716227e2b8..67fefc847d77165f817c3befa578cfa27e6f93d8 100755 --- a/tools/testing/selftests/nolibc/run-tests.sh +++ b/tools/testing/selftests/nolibc/run-tests.sh @@ -17,7 +17,7 @@ perform_download=0 test_mode=system werror=1 llvm= -archs="i386 x86_64 arm64 arm mips32le mips32be ppc ppc64 ppc64le riscv64 s390 loongarch" +archs="i386 x86_64 arm64 arm mips32le mips32be ppc ppc64 ppc64le riscv32 riscv64 s390 loongarch" TEMP=$(getopt -o 'j:d:c:b:a:m:pelh' -n "$0" -- "$@")
-- 2.47.1
linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv
Hello:
This series was applied to riscv/linux.git (fixes) by Thomas Weißschuh linux@weissschuh.net:
On Sat, 21 Dec 2024 15:44:27 +0100 you wrote:
Nolibc has support for riscv32. But the testsuite did not allow to test it so far. Add a test configuration.
Signed-off-by: Thomas Weißschuh linux@weissschuh.net
Thomas Weißschuh (6): tools/nolibc: add support for waitid() selftests/nolibc: use waitid() over waitpid() selftests/nolibc: use a pipe to in vfprintf tests selftests/nolibc: skip tests for unimplemented syscalls selftests/nolibc: rename riscv to riscv64 selftests/nolibc: add configurations for riscv32
[...]
Here is the summary with links: - [1/6] tools/nolibc: add support for waitid() https://git.kernel.org/riscv/c/7f89bc51101c - [2/6] selftests/nolibc: use waitid() over waitpid() https://git.kernel.org/riscv/c/a0bc8947ac73 - [3/6] selftests/nolibc: use a pipe to in vfprintf tests https://git.kernel.org/riscv/c/4c7f09ab79b1 - [4/6] selftests/nolibc: skip tests for unimplemented syscalls https://git.kernel.org/riscv/c/349afc8a52f8 - [5/6] selftests/nolibc: rename riscv to riscv64 https://git.kernel.org/riscv/c/a47b4b9fbaa1 - [6/6] selftests/nolibc: add configurations for riscv32 https://git.kernel.org/riscv/c/60fe18237f72
You are awesome, thank you!
linux-kselftest-mirror@lists.linaro.org
-
Charlie Jenkins -
patchwork-bot+linux-riscv＠kernel.org -
Thomas Weißschuh -
Willy Tarreau