Our memory management kernel CI testing at Red Hat uses the VM selftests and we have run into two problems:
First, our LTP tests overlap with the VM selftests.
We want to avoid unhelpful redundancy in our testing practices.
Second, we have observed the current run_vmtests.sh to report overall failure/ambiguous results in the case that a machine lacks the necessary hardware to perform one or more of the tests. E.g. ksm tests that require more than one numa node.
We want to be able to run the vm selftests suitable to particular hardware.
Add the ability to run one or more groups of vm tests via run_vmtests.sh instead of simply all-or-none in order to solve these problems.
Preserve existing default behavior of running all tests when the script is invoked with no arguments.
Documentation of test groups is included in the patch as follows:
# ./run_vmtests.sh [ -h || --help ]
usage: ./tools/testing/selftests/vm/run_vmtests.sh [ -h | -t "<categories>"] -t: specify specific categories to tests to run -h: display this message
The default behavior is to run all tests.
Alternatively, specific groups tests can be run by passing a string to the -t argument containing one or more of the following categories separated by spaces: - mmap tests for mmap(2) - gup_test tests for gup using gup_test interface - userfaultfd tests for userfaultfd(2) - compaction a test for the patch "Allow compaction of unevictable pages" - mlock tests for mlock(2) - mremap tests for mremap(2) - hugevm tests for very large virtual address space - vmalloc vmalloc smoke tests - hmm hmm smoke tests - madv_populate test memadvise(2) MADV_POPULATE_{READ,WRITE} options - memfd_secret test memfd_secret(2) - process_mrelease test process_mrelease(2) - ksm ksm tests that do not require >=2 NUMA nodes - ksm_numa ksm tests that require >=2 NUMA nodes - pkey memory protection key tests example: ./run_vmtests.sh -t "hmm mmap ksm"
Changes from v2: - rebase onto the mm-everyting branch in https://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm.git - integrate this functionality with new the tests
Changes from v1: - use a command line argument to pass the test categories to the script instead of an environmet variable - remove novel prints to avoid messing with extant parsers of this script - update the usage text
Signed-off-by: Joel Savitz jsavitz@redhat.com --- tools/testing/selftests/vm/run_vmtests.sh | 241 +++++++++++++++------- 1 file changed, 161 insertions(+), 80 deletions(-)
diff --git a/tools/testing/selftests/vm/run_vmtests.sh b/tools/testing/selftests/vm/run_vmtests.sh index d84fe0fa15e1..fb72a1338d07 100755 --- a/tools/testing/selftests/vm/run_vmtests.sh +++ b/tools/testing/selftests/vm/run_vmtests.sh @@ -1,6 +1,6 @@ #!/bin/bash # SPDX-License-Identifier: GPL-2.0 -#please run as root +# Please run as root
# Kselftest framework requirement - SKIP code is 4. ksft_skip=4 @@ -8,15 +8,75 @@ ksft_skip=4 mnt=./huge exitcode=0
-#get huge pagesize and freepages from /proc/meminfo -while read -r name size unit; do - if [ "$name" = "HugePages_Free:" ]; then - freepgs="$size" - fi - if [ "$name" = "Hugepagesize:" ]; then - hpgsize_KB="$size" +usage() { + cat <<EOF +usage: ${BASH_SOURCE[0]:-$0} [ -h | -t "<categories>"] + -t: specify specific categories to tests to run + -h: display this message + +The default behavior is to run all tests. + +Alternatively, specific groups tests can be run by passing a string +to the -t argument containing one or more of the following categories +separated by spaces: +- mmap + tests for mmap(2) +- gup_test + tests for gup using gup_test interface +- userfaultfd + tests for userfaultfd(2) +- compaction + a test for the patch "Allow compaction of unevictable pages" +- mlock + tests for mlock(2) +- mremap + tests for mremap(2) +- hugevm + tests for very large virtual address space +- vmalloc + vmalloc smoke tests +- hmm + hmm smoke tests +- madv_populate + test memadvise(2) MADV_POPULATE_{READ,WRITE} options +- memfd_secret + test memfd_secret(2) +- process_mrelease + test process_mrelease(2) +- ksm + ksm tests that do not require >=2 NUMA nodes +- ksm_numa + ksm tests that require >=2 NUMA nodes +- pkey + memory protection key tests +example: ./run_vmtests.sh -t "hmm mmap ksm" +EOF + exit 0 +} + + +while getopts "ht:" OPT; do + case ${OPT} in + "h") usage ;; + "t") TEST_ITEMS=${OPTARG} ;; + esac +done +shift $((OPTIND -1)) + +# default behavior: run all tests +TEST_ITEMS=${TEST_ITEMS:-default} + +test_selected() { + if [ "$TEST_ITEMS" == "default" ]; then + # If no TEST_ITEMS are specified, run all tests + return 0 fi -done < /proc/meminfo + echo ${TEST_ITEMS} | grep ${1} 2>&1 >/dev/null + return ${?} +} + +# Hugepage setup only needed for hugetlb tests +if test_selected "hugetlb"; then
# Simple hugetlbfs tests have a hardcoded minimum requirement of # huge pages totaling 256MB (262144KB) in size. The userfaultfd @@ -28,7 +88,17 @@ hpgsize_MB=$((hpgsize_KB / 1024)) half_ufd_size_MB=$((((nr_cpus * hpgsize_MB + 127) / 128) * 128)) needmem_KB=$((half_ufd_size_MB * 2 * 1024))
-#set proper nr_hugepages +# get huge pagesize and freepages from /proc/meminfo +while read -r name size unit; do + if [ "$name" = "HugePages_Free:" ]; then + freepgs="$size" + fi + if [ "$name" = "Hugepagesize:" ]; then + hpgsize_KB="$size" + fi +done < /proc/meminfo + +# set proper nr_hugepages if [ -n "$freepgs" ] && [ -n "$hpgsize_KB" ]; then nr_hugepgs=$(cat /proc/sys/vm/nr_hugepages) needpgs=$((needmem_KB / hpgsize_KB)) @@ -57,144 +127,155 @@ else exit 1 fi
-#filter 64bit architectures +fi # test_selected "hugetlb" + +# filter 64bit architectures ARCH64STR="arm64 ia64 mips64 parisc64 ppc64 ppc64le riscv64 s390x sh64 sparc64 x86_64" if [ -z "$ARCH" ]; then ARCH=$(uname -m 2>/dev/null | sed -e 's/aarch64.*/arm64/') fi VADDR64=0 -echo "$ARCH64STR" | grep "$ARCH" && VADDR64=1 +echo "$ARCH64STR" | grep "$ARCH" &>/dev/null && VADDR64=1
# Usage: run_test [test binary] [arbitrary test arguments...] run_test() { - local title="running $*" - local sep=$(echo -n "$title" | tr "[:graph:][:space:]" -) - printf "%s\n%s\n%s\n" "$sep" "$title" "$sep" - - "$@" - local ret=$? - if [ $ret -eq 0 ]; then - echo "[PASS]" - elif [ $ret -eq $ksft_skip ]; then - echo "[SKIP]" - exitcode=$ksft_skip - else - echo "[FAIL]" - exitcode=1 - fi + if test_selected ${CATEGORY}; then + local title="running $*" + local sep=$(echo -n "$title" | tr "[:graph:][:space:]" -) + printf "%s\n%s\n%s\n" "$sep" "$title" "$sep" + + "$@" + local ret=$? + if [ $ret -eq 0 ]; then + echo "[PASS]" + elif [ $ret -eq $ksft_skip ]; then + echo "[SKIP]" + exitcode=$ksft_skip + else + echo "[FAIL]" + exitcode=1 + fi + fi # test_selected }
-mkdir "$mnt" -mount -t hugetlbfs none "$mnt" +# setup only needed for hugetlb tests +if test_selected "hugetlb"; then + mkdir "$mnt" + mount -t hugetlbfs none "$mnt" +fi
-run_test ./hugepage-mmap +CATEGORY="hugetlb" run_test ./hugepage-mmap
shmmax=$(cat /proc/sys/kernel/shmmax) shmall=$(cat /proc/sys/kernel/shmall) echo 268435456 > /proc/sys/kernel/shmmax echo 4194304 > /proc/sys/kernel/shmall -run_test ./hugepage-shm +CATEGORY="hugetlb" run_test ./hugepage-shm echo "$shmmax" > /proc/sys/kernel/shmmax echo "$shmall" > /proc/sys/kernel/shmall
-run_test ./map_hugetlb +CATEGORY="hugetlb" run_test ./map_hugetlb
-run_test ./hugepage-mremap "$mnt"/huge_mremap -rm -f "$mnt"/huge_mremap +CATEGORY="hugetlb" run_test ./hugepage-mremap "$mnt"/huge_mremap +test_selected "hugetlb" && rm -f "$mnt"/huge_mremap
-run_test ./hugepage-vmemmap +CATEGORY="hugetlb" run_test ./hugepage-vmemmap
-run_test ./hugetlb-madvise "$mnt"/madvise-test -rm -f "$mnt"/madvise-test +CATEGORY="hugetlb" run_test ./hugetlb-madvise "$mnt"/madvise-test +test_selected "hugetlb" && rm -f "$mnt"/madvise-test
-echo "NOTE: The above hugetlb tests provide minimal coverage. Use" -echo " https://github.com/libhugetlbfs/libhugetlbfs.git for" -echo " hugetlb regression testing." +if test_selected "hugetlb"; then + echo "NOTE: These hugetlb tests provide minimal coverage. Use" + echo " https://github.com/libhugetlbfs/libhugetlbfs.git for" + echo " hugetlb regression testing." +fi
-run_test ./map_fixed_noreplace +CATEGORY="mmap" run_test ./map_fixed_noreplace
# get_user_pages_fast() benchmark -run_test ./gup_test -u +CATEGORY="gup_test" run_test ./gup_test -u # pin_user_pages_fast() benchmark -run_test ./gup_test -a +CATEGORY="gup_test" run_test ./gup_test -a # Dump pages 0, 19, and 4096, using pin_user_pages: -run_test ./gup_test -ct -F 0x1 0 19 0x1000 +CATEGORY="gup_test" run_test ./gup_test -ct -F 0x1 0 19 0x1000
-run_test ./userfaultfd anon 20 16 -run_test ./userfaultfd anon:dev 20 16 +CATEGORY="userfaultfd" run_test ./userfaultfd anon 20 16 +CATEGORY="userfaultfd" run_test ./userfaultfd anon:dev 20 16 # Hugetlb tests require source and destination huge pages. Pass in half the # size ($half_ufd_size_MB), which is used for *each*. -run_test ./userfaultfd hugetlb "$half_ufd_size_MB" 32 -run_test ./userfaultfd hugetlb:dev "$half_ufd_size_MB" 32 -run_test ./userfaultfd hugetlb_shared "$half_ufd_size_MB" 32 "$mnt"/uffd-test +CATEGORY="userfaultfd" run_test ./userfaultfd hugetlb "$half_ufd_size_MB" 32 +CATEGORY="userfaultfd" run_test ./userfaultfd hugetlb:dev "$half_ufd_size_MB" 32 +CATEGORY="userfaultfd" run_test ./userfaultfd hugetlb_shared "$half_ufd_size_MB" 32 "$mnt"/uffd-test rm -f "$mnt"/uffd-test -run_test ./userfaultfd hugetlb_shared:dev "$half_ufd_size_MB" 32 "$mnt"/uffd-test +CATEGORY="userfaultfd" run_test ./userfaultfd hugetlb_shared:dev "$half_ufd_size_MB" 32 "$mnt"/uffd-test rm -f "$mnt"/uffd-test -run_test ./userfaultfd shmem 20 16 -run_test ./userfaultfd shmem:dev 20 16 - -#cleanup -umount "$mnt" -rm -rf "$mnt" -echo "$nr_hugepgs" > /proc/sys/vm/nr_hugepages +CATEGORY="userfaultfd" run_test ./userfaultfd shmem 20 16 +CATEGORY="userfaultfd" run_test ./userfaultfd shmem:dev 20 16 + +# cleanup (only needed when running hugetlb tests) +if test_selected "hugetlb"; then + umount "$mnt" + rm -rf "$mnt" + echo "$nr_hugepgs" > /proc/sys/vm/nr_hugepages +fi
-run_test ./compaction_test +CATEGORY="compaction" run_test ./compaction_test
-run_test sudo -u nobody ./on-fault-limit +CATEGORY="mlock" run_test sudo -u nobody ./on-fault-limit
-run_test ./map_populate +CATEGORY="mmap" run_test ./map_populate
-run_test ./mlock-random-test +CATEGORY="mlock" run_test ./mlock-random-test
-run_test ./mlock2-tests +CATEGORY="mlock" run_test ./mlock2-tests
-run_test ./mrelease_test +CATEGORY="process_mrelease" run_test ./mrelease_test
-run_test ./mremap_test +CATEGORY="mremap" run_test ./mremap_test
-run_test ./thuge-gen +CATEGORY="hugetlb" run_test ./thuge-gen
if [ $VADDR64 -ne 0 ]; then - run_test ./virtual_address_range + CATEGORY="hugevm" run_test ./virtual_address_range
# virtual address 128TB switch test - run_test ./va_128TBswitch.sh + CATEGORY="hugevm" run_test ./va_128TBswitch.sh fi # VADDR64
# vmalloc stability smoke test -run_test ./test_vmalloc.sh smoke +CATEGORY="vmalloc" run_test ./test_vmalloc.sh smoke
-run_test ./mremap_dontunmap +CATEGORY="mremap" run_test ./mremap_dontunmap
-run_test ./test_hmm.sh smoke +CATEGORY="hmm" run_test ./test_hmm.sh smoke
# MADV_POPULATE_READ and MADV_POPULATE_WRITE tests -run_test ./madv_populate +CATEGORY="madv_populate" run_test ./madv_populate
-run_test ./memfd_secret +CATEGORY="memfd_secret" run_test ./memfd_secret
# KSM MADV_MERGEABLE test with 10 identical pages -run_test ./ksm_tests -M -p 10 +CATEGORY="ksm" run_test ./ksm_tests -M -p 10 # KSM unmerge test -run_test ./ksm_tests -U +CATEGORY="ksm" run_test ./ksm_tests -U # KSM test with 10 zero pages and use_zero_pages = 0 -run_test ./ksm_tests -Z -p 10 -z 0 +CATEGORY="ksm" run_test ./ksm_tests -Z -p 10 -z 0 # KSM test with 10 zero pages and use_zero_pages = 1 -run_test ./ksm_tests -Z -p 10 -z 1 +CATEGORY="ksm" run_test ./ksm_tests -Z -p 10 -z 1 # KSM test with 2 NUMA nodes and merge_across_nodes = 1 -run_test ./ksm_tests -N -m 1 +CATEGORY="ksm_numa" run_test ./ksm_tests -N -m 1 # KSM test with 2 NUMA nodes and merge_across_nodes = 0 -run_test ./ksm_tests -N -m 0 +CATEGORY="ksm_numa" run_test ./ksm_tests -N -m 0
# protection_keys tests if [ -x ./protection_keys_32 ] then - run_test ./protection_keys_32 + CATEGORY="pkey" run_test ./protection_keys_32 fi
if [ -x ./protection_keys_64 ] then - run_test ./protection_keys_64 + CATEGORY="pkey" run_test ./protection_keys_64 fi
exit $exitcode
Hi Andrew and Joel,
I noticed a flaw in switching to the cmdline argument over the environment variable. If you are utilizing the exerciser script (in tools/testing/selftests/run_kselftest.sh), this is not designed to pass cmdline variables to the individual TEST_PROGS. On the other hand if we utilize Env. variables we can still specify which tests we'd like to run. Our infrastructure is designed to utilize this wrapper, so we inevitably will not be able to use this the way we thought.
Would you be ok with switching back to the initial approach? If so I believe making the name more specific would be ideal, ie) VM_TEST_ITEMS.
Cheers, -- Nico
On Wed, Jul 6, 2022 at 4:55 PM Joel Savitz jsavitz@redhat.com wrote:
Our memory management kernel CI testing at Red Hat uses the VM selftests and we have run into two problems:
First, our LTP tests overlap with the VM selftests.
We want to avoid unhelpful redundancy in our testing practices.
Second, we have observed the current run_vmtests.sh to report overall failure/ambiguous results in the case that a machine lacks the necessary hardware to perform one or more of the tests. E.g. ksm tests that require more than one numa node.
We want to be able to run the vm selftests suitable to particular hardware.
Add the ability to run one or more groups of vm tests via run_vmtests.sh instead of simply all-or-none in order to solve these problems.
Preserve existing default behavior of running all tests when the script is invoked with no arguments.
Documentation of test groups is included in the patch as follows:
# ./run_vmtests.sh [ -h || --help ] usage: ./tools/testing/selftests/vm/run_vmtests.sh [ -h | -t "<categories>"] -t: specify specific categories to tests to run -h: display this message The default behavior is to run all tests. Alternatively, specific groups tests can be run by passing a string to the -t argument containing one or more of the following categories separated by spaces: - mmap tests for mmap(2) - gup_test tests for gup using gup_test interface - userfaultfd tests for userfaultfd(2) - compaction a test for the patch "Allow compaction of unevictable pages" - mlock tests for mlock(2) - mremap tests for mremap(2) - hugevm tests for very large virtual address space - vmalloc vmalloc smoke tests - hmm hmm smoke tests - madv_populate test memadvise(2) MADV_POPULATE_{READ,WRITE} options - memfd_secret test memfd_secret(2) - process_mrelease test process_mrelease(2) - ksm ksm tests that do not require >=2 NUMA nodes - ksm_numa ksm tests that require >=2 NUMA nodes - pkey memory protection key tests example: ./run_vmtests.sh -t "hmm mmap ksm"Changes from v2: - rebase onto the mm-everyting branch in https://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm.git - integrate this functionality with new the tests
Changes from v1: - use a command line argument to pass the test categories to the script instead of an environmet variable - remove novel prints to avoid messing with extant parsers of this script - update the usage text
Signed-off-by: Joel Savitz jsavitz@redhat.com
tools/testing/selftests/vm/run_vmtests.sh | 241 +++++++++++++++------- 1 file changed, 161 insertions(+), 80 deletions(-)
diff --git a/tools/testing/selftests/vm/run_vmtests.sh b/tools/testing/selftests/vm/run_vmtests.sh index d84fe0fa15e1..fb72a1338d07 100755 --- a/tools/testing/selftests/vm/run_vmtests.sh +++ b/tools/testing/selftests/vm/run_vmtests.sh @@ -1,6 +1,6 @@ #!/bin/bash # SPDX-License-Identifier: GPL-2.0 -#please run as root +# Please run as root
# Kselftest framework requirement - SKIP code is 4. ksft_skip=4 @@ -8,15 +8,75 @@ ksft_skip=4 mnt=./huge exitcode=0
-#get huge pagesize and freepages from /proc/meminfo -while read -r name size unit; do
if [ "$name" = "HugePages_Free:" ]; thenfreepgs="$size"fiif [ "$name" = "Hugepagesize:" ]; thenhpgsize_KB="$size"+usage() {
cat <<EOF+usage: ${BASH_SOURCE[0]:-$0} [ -h | -t "<categories>"]
- -t: specify specific categories to tests to run
- -h: display this message
+The default behavior is to run all tests.
+Alternatively, specific groups tests can be run by passing a string +to the -t argument containing one or more of the following categories +separated by spaces: +- mmap
tests for mmap(2)+- gup_test
tests for gup using gup_test interface+- userfaultfd
tests for userfaultfd(2)+- compaction
a test for the patch "Allow compaction of unevictable pages"+- mlock
tests for mlock(2)+- mremap
tests for mremap(2)+- hugevm
tests for very large virtual address space+- vmalloc
vmalloc smoke tests+- hmm
hmm smoke tests+- madv_populate
test memadvise(2) MADV_POPULATE_{READ,WRITE} options+- memfd_secret
test memfd_secret(2)+- process_mrelease
test process_mrelease(2)+- ksm
ksm tests that do not require >=2 NUMA nodes+- ksm_numa
ksm tests that require >=2 NUMA nodes+- pkey
memory protection key tests+example: ./run_vmtests.sh -t "hmm mmap ksm" +EOF
exit 0+}
+while getopts "ht:" OPT; do
case ${OPT} in"h") usage ;;"t") TEST_ITEMS=${OPTARG} ;;esac+done +shift $((OPTIND -1))
+# default behavior: run all tests +TEST_ITEMS=${TEST_ITEMS:-default}
+test_selected() {
if [ "$TEST_ITEMS" == "default" ]; then# If no TEST_ITEMS are specified, run all testsreturn 0 fi-done < /proc/meminfo
echo ${TEST_ITEMS} | grep ${1} 2>&1 >/dev/nullreturn ${?}+}
+# Hugepage setup only needed for hugetlb tests +if test_selected "hugetlb"; then
# Simple hugetlbfs tests have a hardcoded minimum requirement of # huge pages totaling 256MB (262144KB) in size. The userfaultfd @@ -28,7 +88,17 @@ hpgsize_MB=$((hpgsize_KB / 1024)) half_ufd_size_MB=$((((nr_cpus * hpgsize_MB + 127) / 128) * 128)) needmem_KB=$((half_ufd_size_MB * 2 * 1024))
-#set proper nr_hugepages +# get huge pagesize and freepages from /proc/meminfo +while read -r name size unit; do
if [ "$name" = "HugePages_Free:" ]; thenfreepgs="$size"fiif [ "$name" = "Hugepagesize:" ]; thenhpgsize_KB="$size"fi+done < /proc/meminfo
+# set proper nr_hugepages if [ -n "$freepgs" ] && [ -n "$hpgsize_KB" ]; then nr_hugepgs=$(cat /proc/sys/vm/nr_hugepages) needpgs=$((needmem_KB / hpgsize_KB)) @@ -57,144 +127,155 @@ else exit 1 fi
-#filter 64bit architectures +fi # test_selected "hugetlb"
+# filter 64bit architectures ARCH64STR="arm64 ia64 mips64 parisc64 ppc64 ppc64le riscv64 s390x sh64 sparc64 x86_64" if [ -z "$ARCH" ]; then ARCH=$(uname -m 2>/dev/null | sed -e 's/aarch64.*/arm64/') fi VADDR64=0 -echo "$ARCH64STR" | grep "$ARCH" && VADDR64=1 +echo "$ARCH64STR" | grep "$ARCH" &>/dev/null && VADDR64=1
# Usage: run_test [test binary] [arbitrary test arguments...] run_test() {
local title="running $*"local sep=$(echo -n "$title" | tr "[:graph:][:space:]" -)printf "%s\n%s\n%s\n" "$sep" "$title" "$sep""$@"local ret=$?if [ $ret -eq 0 ]; thenecho "[PASS]"elif [ $ret -eq $ksft_skip ]; thenecho "[SKIP]"exitcode=$ksft_skipelseecho "[FAIL]"exitcode=1fi
if test_selected ${CATEGORY}; thenlocal title="running $*"local sep=$(echo -n "$title" | tr "[:graph:][:space:]" -)printf "%s\n%s\n%s\n" "$sep" "$title" "$sep""$@"local ret=$?if [ $ret -eq 0 ]; thenecho "[PASS]"elif [ $ret -eq $ksft_skip ]; thenecho "[SKIP]"exitcode=$ksft_skipelseecho "[FAIL]"exitcode=1fifi # test_selected}
-mkdir "$mnt" -mount -t hugetlbfs none "$mnt" +# setup only needed for hugetlb tests +if test_selected "hugetlb"; then
mkdir "$mnt"mount -t hugetlbfs none "$mnt"+fi
-run_test ./hugepage-mmap +CATEGORY="hugetlb" run_test ./hugepage-mmap
shmmax=$(cat /proc/sys/kernel/shmmax) shmall=$(cat /proc/sys/kernel/shmall) echo 268435456 > /proc/sys/kernel/shmmax echo 4194304 > /proc/sys/kernel/shmall -run_test ./hugepage-shm +CATEGORY="hugetlb" run_test ./hugepage-shm echo "$shmmax" > /proc/sys/kernel/shmmax echo "$shmall" > /proc/sys/kernel/shmall
-run_test ./map_hugetlb +CATEGORY="hugetlb" run_test ./map_hugetlb
-run_test ./hugepage-mremap "$mnt"/huge_mremap -rm -f "$mnt"/huge_mremap +CATEGORY="hugetlb" run_test ./hugepage-mremap "$mnt"/huge_mremap +test_selected "hugetlb" && rm -f "$mnt"/huge_mremap
-run_test ./hugepage-vmemmap +CATEGORY="hugetlb" run_test ./hugepage-vmemmap
-run_test ./hugetlb-madvise "$mnt"/madvise-test -rm -f "$mnt"/madvise-test +CATEGORY="hugetlb" run_test ./hugetlb-madvise "$mnt"/madvise-test +test_selected "hugetlb" && rm -f "$mnt"/madvise-test
-echo "NOTE: The above hugetlb tests provide minimal coverage. Use" -echo " https://github.com/libhugetlbfs/libhugetlbfs.git for" -echo " hugetlb regression testing." +if test_selected "hugetlb"; then
echo "NOTE: These hugetlb tests provide minimal coverage. Use"echo " https://github.com/libhugetlbfs/libhugetlbfs.git for"echo " hugetlb regression testing."+fi
-run_test ./map_fixed_noreplace +CATEGORY="mmap" run_test ./map_fixed_noreplace
# get_user_pages_fast() benchmark -run_test ./gup_test -u +CATEGORY="gup_test" run_test ./gup_test -u # pin_user_pages_fast() benchmark -run_test ./gup_test -a +CATEGORY="gup_test" run_test ./gup_test -a # Dump pages 0, 19, and 4096, using pin_user_pages: -run_test ./gup_test -ct -F 0x1 0 19 0x1000 +CATEGORY="gup_test" run_test ./gup_test -ct -F 0x1 0 19 0x1000
-run_test ./userfaultfd anon 20 16 -run_test ./userfaultfd anon:dev 20 16 +CATEGORY="userfaultfd" run_test ./userfaultfd anon 20 16 +CATEGORY="userfaultfd" run_test ./userfaultfd anon:dev 20 16 # Hugetlb tests require source and destination huge pages. Pass in half the # size ($half_ufd_size_MB), which is used for *each*. -run_test ./userfaultfd hugetlb "$half_ufd_size_MB" 32 -run_test ./userfaultfd hugetlb:dev "$half_ufd_size_MB" 32 -run_test ./userfaultfd hugetlb_shared "$half_ufd_size_MB" 32 "$mnt"/uffd-test +CATEGORY="userfaultfd" run_test ./userfaultfd hugetlb "$half_ufd_size_MB" 32 +CATEGORY="userfaultfd" run_test ./userfaultfd hugetlb:dev "$half_ufd_size_MB" 32 +CATEGORY="userfaultfd" run_test ./userfaultfd hugetlb_shared "$half_ufd_size_MB" 32 "$mnt"/uffd-test rm -f "$mnt"/uffd-test -run_test ./userfaultfd hugetlb_shared:dev "$half_ufd_size_MB" 32 "$mnt"/uffd-test +CATEGORY="userfaultfd" run_test ./userfaultfd hugetlb_shared:dev "$half_ufd_size_MB" 32 "$mnt"/uffd-test rm -f "$mnt"/uffd-test -run_test ./userfaultfd shmem 20 16 -run_test ./userfaultfd shmem:dev 20 16
-#cleanup -umount "$mnt" -rm -rf "$mnt" -echo "$nr_hugepgs" > /proc/sys/vm/nr_hugepages +CATEGORY="userfaultfd" run_test ./userfaultfd shmem 20 16 +CATEGORY="userfaultfd" run_test ./userfaultfd shmem:dev 20 16
+# cleanup (only needed when running hugetlb tests) +if test_selected "hugetlb"; then
umount "$mnt"rm -rf "$mnt"echo "$nr_hugepgs" > /proc/sys/vm/nr_hugepages+fi
-run_test ./compaction_test +CATEGORY="compaction" run_test ./compaction_test
-run_test sudo -u nobody ./on-fault-limit +CATEGORY="mlock" run_test sudo -u nobody ./on-fault-limit
-run_test ./map_populate +CATEGORY="mmap" run_test ./map_populate
-run_test ./mlock-random-test +CATEGORY="mlock" run_test ./mlock-random-test
-run_test ./mlock2-tests +CATEGORY="mlock" run_test ./mlock2-tests
-run_test ./mrelease_test +CATEGORY="process_mrelease" run_test ./mrelease_test
-run_test ./mremap_test +CATEGORY="mremap" run_test ./mremap_test
-run_test ./thuge-gen +CATEGORY="hugetlb" run_test ./thuge-gen
if [ $VADDR64 -ne 0 ]; then
run_test ./virtual_address_range
CATEGORY="hugevm" run_test ./virtual_address_range # virtual address 128TB switch test
run_test ./va_128TBswitch.sh
CATEGORY="hugevm" run_test ./va_128TBswitch.shfi # VADDR64
# vmalloc stability smoke test -run_test ./test_vmalloc.sh smoke +CATEGORY="vmalloc" run_test ./test_vmalloc.sh smoke
-run_test ./mremap_dontunmap +CATEGORY="mremap" run_test ./mremap_dontunmap
-run_test ./test_hmm.sh smoke +CATEGORY="hmm" run_test ./test_hmm.sh smoke
# MADV_POPULATE_READ and MADV_POPULATE_WRITE tests -run_test ./madv_populate +CATEGORY="madv_populate" run_test ./madv_populate
-run_test ./memfd_secret +CATEGORY="memfd_secret" run_test ./memfd_secret
# KSM MADV_MERGEABLE test with 10 identical pages -run_test ./ksm_tests -M -p 10 +CATEGORY="ksm" run_test ./ksm_tests -M -p 10 # KSM unmerge test -run_test ./ksm_tests -U +CATEGORY="ksm" run_test ./ksm_tests -U # KSM test with 10 zero pages and use_zero_pages = 0 -run_test ./ksm_tests -Z -p 10 -z 0 +CATEGORY="ksm" run_test ./ksm_tests -Z -p 10 -z 0 # KSM test with 10 zero pages and use_zero_pages = 1 -run_test ./ksm_tests -Z -p 10 -z 1 +CATEGORY="ksm" run_test ./ksm_tests -Z -p 10 -z 1 # KSM test with 2 NUMA nodes and merge_across_nodes = 1 -run_test ./ksm_tests -N -m 1 +CATEGORY="ksm_numa" run_test ./ksm_tests -N -m 1 # KSM test with 2 NUMA nodes and merge_across_nodes = 0 -run_test ./ksm_tests -N -m 0 +CATEGORY="ksm_numa" run_test ./ksm_tests -N -m 0
# protection_keys tests if [ -x ./protection_keys_32 ] then
run_test ./protection_keys_32
CATEGORY="pkey" run_test ./protection_keys_32fi
if [ -x ./protection_keys_64 ] then
run_test ./protection_keys_64
CATEGORY="pkey" run_test ./protection_keys_64fi
exit $exitcode
2.31.1
Hello,
Sorry for the late reply.
Setting TEST_ITEMS="xx yy zz" and invoking the script has the same effect as passing -t "xx yy zz" to the script. VM_TEST_ITEMS may be a better env variable name however.
Best, Joel Savitz
On Fri, Jul 15, 2022 at 3:55 PM Nico Pache npache@redhat.com wrote:
Hi Andrew and Joel,
I noticed a flaw in switching to the cmdline argument over the environment variable. If you are utilizing the exerciser script (in tools/testing/selftests/run_kselftest.sh), this is not designed to pass cmdline variables to the individual TEST_PROGS. On the other hand if we utilize Env. variables we can still specify which tests we'd like to run. Our infrastructure is designed to utilize this wrapper, so we inevitably will not be able to use this the way we thought.
Would you be ok with switching back to the initial approach? If so I believe making the name more specific would be ideal, ie) VM_TEST_ITEMS.
Cheers, -- Nico
On Wed, Jul 6, 2022 at 4:55 PM Joel Savitz jsavitz@redhat.com wrote:
Our memory management kernel CI testing at Red Hat uses the VM selftests and we have run into two problems:
First, our LTP tests overlap with the VM selftests.
We want to avoid unhelpful redundancy in our testing practices.
Second, we have observed the current run_vmtests.sh to report overall failure/ambiguous results in the case that a machine lacks the necessary hardware to perform one or more of the tests. E.g. ksm tests that require more than one numa node.
We want to be able to run the vm selftests suitable to particular hardware.
Add the ability to run one or more groups of vm tests via run_vmtests.sh instead of simply all-or-none in order to solve these problems.
Preserve existing default behavior of running all tests when the script is invoked with no arguments.
Documentation of test groups is included in the patch as follows:
# ./run_vmtests.sh [ -h || --help ] usage: ./tools/testing/selftests/vm/run_vmtests.sh [ -h | -t "<categories>"] -t: specify specific categories to tests to run -h: display this message The default behavior is to run all tests. Alternatively, specific groups tests can be run by passing a string to the -t argument containing one or more of the following categories separated by spaces: - mmap tests for mmap(2) - gup_test tests for gup using gup_test interface - userfaultfd tests for userfaultfd(2) - compaction a test for the patch "Allow compaction of unevictable pages" - mlock tests for mlock(2) - mremap tests for mremap(2) - hugevm tests for very large virtual address space - vmalloc vmalloc smoke tests - hmm hmm smoke tests - madv_populate test memadvise(2) MADV_POPULATE_{READ,WRITE} options - memfd_secret test memfd_secret(2) - process_mrelease test process_mrelease(2) - ksm ksm tests that do not require >=2 NUMA nodes - ksm_numa ksm tests that require >=2 NUMA nodes - pkey memory protection key tests example: ./run_vmtests.sh -t "hmm mmap ksm"Changes from v2: - rebase onto the mm-everyting branch in https://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm.git - integrate this functionality with new the tests
Changes from v1: - use a command line argument to pass the test categories to the script instead of an environmet variable - remove novel prints to avoid messing with extant parsers of this script - update the usage text
Signed-off-by: Joel Savitz jsavitz@redhat.com
tools/testing/selftests/vm/run_vmtests.sh | 241 +++++++++++++++------- 1 file changed, 161 insertions(+), 80 deletions(-)
diff --git a/tools/testing/selftests/vm/run_vmtests.sh b/tools/testing/selftests/vm/run_vmtests.sh index d84fe0fa15e1..fb72a1338d07 100755 --- a/tools/testing/selftests/vm/run_vmtests.sh +++ b/tools/testing/selftests/vm/run_vmtests.sh @@ -1,6 +1,6 @@ #!/bin/bash # SPDX-License-Identifier: GPL-2.0 -#please run as root +# Please run as root
# Kselftest framework requirement - SKIP code is 4. ksft_skip=4 @@ -8,15 +8,75 @@ ksft_skip=4 mnt=./huge exitcode=0
-#get huge pagesize and freepages from /proc/meminfo -while read -r name size unit; do
if [ "$name" = "HugePages_Free:" ]; thenfreepgs="$size"fiif [ "$name" = "Hugepagesize:" ]; thenhpgsize_KB="$size"+usage() {
cat <<EOF+usage: ${BASH_SOURCE[0]:-$0} [ -h | -t "<categories>"]
- -t: specify specific categories to tests to run
- -h: display this message
+The default behavior is to run all tests.
+Alternatively, specific groups tests can be run by passing a string +to the -t argument containing one or more of the following categories +separated by spaces: +- mmap
tests for mmap(2)+- gup_test
tests for gup using gup_test interface+- userfaultfd
tests for userfaultfd(2)+- compaction
a test for the patch "Allow compaction of unevictable pages"+- mlock
tests for mlock(2)+- mremap
tests for mremap(2)+- hugevm
tests for very large virtual address space+- vmalloc
vmalloc smoke tests+- hmm
hmm smoke tests+- madv_populate
test memadvise(2) MADV_POPULATE_{READ,WRITE} options+- memfd_secret
test memfd_secret(2)+- process_mrelease
test process_mrelease(2)+- ksm
ksm tests that do not require >=2 NUMA nodes+- ksm_numa
ksm tests that require >=2 NUMA nodes+- pkey
memory protection key tests+example: ./run_vmtests.sh -t "hmm mmap ksm" +EOF
exit 0+}
+while getopts "ht:" OPT; do
case ${OPT} in"h") usage ;;"t") TEST_ITEMS=${OPTARG} ;;esac+done +shift $((OPTIND -1))
+# default behavior: run all tests +TEST_ITEMS=${TEST_ITEMS:-default}
+test_selected() {
if [ "$TEST_ITEMS" == "default" ]; then# If no TEST_ITEMS are specified, run all testsreturn 0 fi-done < /proc/meminfo
echo ${TEST_ITEMS} | grep ${1} 2>&1 >/dev/nullreturn ${?}+}
+# Hugepage setup only needed for hugetlb tests +if test_selected "hugetlb"; then
# Simple hugetlbfs tests have a hardcoded minimum requirement of # huge pages totaling 256MB (262144KB) in size. The userfaultfd @@ -28,7 +88,17 @@ hpgsize_MB=$((hpgsize_KB / 1024)) half_ufd_size_MB=$((((nr_cpus * hpgsize_MB + 127) / 128) * 128)) needmem_KB=$((half_ufd_size_MB * 2 * 1024))
-#set proper nr_hugepages +# get huge pagesize and freepages from /proc/meminfo +while read -r name size unit; do
if [ "$name" = "HugePages_Free:" ]; thenfreepgs="$size"fiif [ "$name" = "Hugepagesize:" ]; thenhpgsize_KB="$size"fi+done < /proc/meminfo
+# set proper nr_hugepages if [ -n "$freepgs" ] && [ -n "$hpgsize_KB" ]; then nr_hugepgs=$(cat /proc/sys/vm/nr_hugepages) needpgs=$((needmem_KB / hpgsize_KB)) @@ -57,144 +127,155 @@ else exit 1 fi
-#filter 64bit architectures +fi # test_selected "hugetlb"
+# filter 64bit architectures ARCH64STR="arm64 ia64 mips64 parisc64 ppc64 ppc64le riscv64 s390x sh64 sparc64 x86_64" if [ -z "$ARCH" ]; then ARCH=$(uname -m 2>/dev/null | sed -e 's/aarch64.*/arm64/') fi VADDR64=0 -echo "$ARCH64STR" | grep "$ARCH" && VADDR64=1 +echo "$ARCH64STR" | grep "$ARCH" &>/dev/null && VADDR64=1
# Usage: run_test [test binary] [arbitrary test arguments...] run_test() {
local title="running $*"local sep=$(echo -n "$title" | tr "[:graph:][:space:]" -)printf "%s\n%s\n%s\n" "$sep" "$title" "$sep""$@"local ret=$?if [ $ret -eq 0 ]; thenecho "[PASS]"elif [ $ret -eq $ksft_skip ]; thenecho "[SKIP]"exitcode=$ksft_skipelseecho "[FAIL]"exitcode=1fi
if test_selected ${CATEGORY}; thenlocal title="running $*"local sep=$(echo -n "$title" | tr "[:graph:][:space:]" -)printf "%s\n%s\n%s\n" "$sep" "$title" "$sep""$@"local ret=$?if [ $ret -eq 0 ]; thenecho "[PASS]"elif [ $ret -eq $ksft_skip ]; thenecho "[SKIP]"exitcode=$ksft_skipelseecho "[FAIL]"exitcode=1fifi # test_selected}
-mkdir "$mnt" -mount -t hugetlbfs none "$mnt" +# setup only needed for hugetlb tests +if test_selected "hugetlb"; then
mkdir "$mnt"mount -t hugetlbfs none "$mnt"+fi
-run_test ./hugepage-mmap +CATEGORY="hugetlb" run_test ./hugepage-mmap
shmmax=$(cat /proc/sys/kernel/shmmax) shmall=$(cat /proc/sys/kernel/shmall) echo 268435456 > /proc/sys/kernel/shmmax echo 4194304 > /proc/sys/kernel/shmall -run_test ./hugepage-shm +CATEGORY="hugetlb" run_test ./hugepage-shm echo "$shmmax" > /proc/sys/kernel/shmmax echo "$shmall" > /proc/sys/kernel/shmall
-run_test ./map_hugetlb +CATEGORY="hugetlb" run_test ./map_hugetlb
-run_test ./hugepage-mremap "$mnt"/huge_mremap -rm -f "$mnt"/huge_mremap +CATEGORY="hugetlb" run_test ./hugepage-mremap "$mnt"/huge_mremap +test_selected "hugetlb" && rm -f "$mnt"/huge_mremap
-run_test ./hugepage-vmemmap +CATEGORY="hugetlb" run_test ./hugepage-vmemmap
-run_test ./hugetlb-madvise "$mnt"/madvise-test -rm -f "$mnt"/madvise-test +CATEGORY="hugetlb" run_test ./hugetlb-madvise "$mnt"/madvise-test +test_selected "hugetlb" && rm -f "$mnt"/madvise-test
-echo "NOTE: The above hugetlb tests provide minimal coverage. Use" -echo " https://github.com/libhugetlbfs/libhugetlbfs.git for" -echo " hugetlb regression testing." +if test_selected "hugetlb"; then
echo "NOTE: These hugetlb tests provide minimal coverage. Use"echo " https://github.com/libhugetlbfs/libhugetlbfs.git for"echo " hugetlb regression testing."+fi
-run_test ./map_fixed_noreplace +CATEGORY="mmap" run_test ./map_fixed_noreplace
# get_user_pages_fast() benchmark -run_test ./gup_test -u +CATEGORY="gup_test" run_test ./gup_test -u # pin_user_pages_fast() benchmark -run_test ./gup_test -a +CATEGORY="gup_test" run_test ./gup_test -a # Dump pages 0, 19, and 4096, using pin_user_pages: -run_test ./gup_test -ct -F 0x1 0 19 0x1000 +CATEGORY="gup_test" run_test ./gup_test -ct -F 0x1 0 19 0x1000
-run_test ./userfaultfd anon 20 16 -run_test ./userfaultfd anon:dev 20 16 +CATEGORY="userfaultfd" run_test ./userfaultfd anon 20 16 +CATEGORY="userfaultfd" run_test ./userfaultfd anon:dev 20 16 # Hugetlb tests require source and destination huge pages. Pass in half the # size ($half_ufd_size_MB), which is used for *each*. -run_test ./userfaultfd hugetlb "$half_ufd_size_MB" 32 -run_test ./userfaultfd hugetlb:dev "$half_ufd_size_MB" 32 -run_test ./userfaultfd hugetlb_shared "$half_ufd_size_MB" 32 "$mnt"/uffd-test +CATEGORY="userfaultfd" run_test ./userfaultfd hugetlb "$half_ufd_size_MB" 32 +CATEGORY="userfaultfd" run_test ./userfaultfd hugetlb:dev "$half_ufd_size_MB" 32 +CATEGORY="userfaultfd" run_test ./userfaultfd hugetlb_shared "$half_ufd_size_MB" 32 "$mnt"/uffd-test rm -f "$mnt"/uffd-test -run_test ./userfaultfd hugetlb_shared:dev "$half_ufd_size_MB" 32 "$mnt"/uffd-test +CATEGORY="userfaultfd" run_test ./userfaultfd hugetlb_shared:dev "$half_ufd_size_MB" 32 "$mnt"/uffd-test rm -f "$mnt"/uffd-test -run_test ./userfaultfd shmem 20 16 -run_test ./userfaultfd shmem:dev 20 16
-#cleanup -umount "$mnt" -rm -rf "$mnt" -echo "$nr_hugepgs" > /proc/sys/vm/nr_hugepages +CATEGORY="userfaultfd" run_test ./userfaultfd shmem 20 16 +CATEGORY="userfaultfd" run_test ./userfaultfd shmem:dev 20 16
+# cleanup (only needed when running hugetlb tests) +if test_selected "hugetlb"; then
umount "$mnt"rm -rf "$mnt"echo "$nr_hugepgs" > /proc/sys/vm/nr_hugepages+fi
-run_test ./compaction_test +CATEGORY="compaction" run_test ./compaction_test
-run_test sudo -u nobody ./on-fault-limit +CATEGORY="mlock" run_test sudo -u nobody ./on-fault-limit
-run_test ./map_populate +CATEGORY="mmap" run_test ./map_populate
-run_test ./mlock-random-test +CATEGORY="mlock" run_test ./mlock-random-test
-run_test ./mlock2-tests +CATEGORY="mlock" run_test ./mlock2-tests
-run_test ./mrelease_test +CATEGORY="process_mrelease" run_test ./mrelease_test
-run_test ./mremap_test +CATEGORY="mremap" run_test ./mremap_test
-run_test ./thuge-gen +CATEGORY="hugetlb" run_test ./thuge-gen
if [ $VADDR64 -ne 0 ]; then
run_test ./virtual_address_range
CATEGORY="hugevm" run_test ./virtual_address_range # virtual address 128TB switch test
run_test ./va_128TBswitch.sh
CATEGORY="hugevm" run_test ./va_128TBswitch.shfi # VADDR64
# vmalloc stability smoke test -run_test ./test_vmalloc.sh smoke +CATEGORY="vmalloc" run_test ./test_vmalloc.sh smoke
-run_test ./mremap_dontunmap +CATEGORY="mremap" run_test ./mremap_dontunmap
-run_test ./test_hmm.sh smoke +CATEGORY="hmm" run_test ./test_hmm.sh smoke
# MADV_POPULATE_READ and MADV_POPULATE_WRITE tests -run_test ./madv_populate +CATEGORY="madv_populate" run_test ./madv_populate
-run_test ./memfd_secret +CATEGORY="memfd_secret" run_test ./memfd_secret
# KSM MADV_MERGEABLE test with 10 identical pages -run_test ./ksm_tests -M -p 10 +CATEGORY="ksm" run_test ./ksm_tests -M -p 10 # KSM unmerge test -run_test ./ksm_tests -U +CATEGORY="ksm" run_test ./ksm_tests -U # KSM test with 10 zero pages and use_zero_pages = 0 -run_test ./ksm_tests -Z -p 10 -z 0 +CATEGORY="ksm" run_test ./ksm_tests -Z -p 10 -z 0 # KSM test with 10 zero pages and use_zero_pages = 1 -run_test ./ksm_tests -Z -p 10 -z 1 +CATEGORY="ksm" run_test ./ksm_tests -Z -p 10 -z 1 # KSM test with 2 NUMA nodes and merge_across_nodes = 1 -run_test ./ksm_tests -N -m 1 +CATEGORY="ksm_numa" run_test ./ksm_tests -N -m 1 # KSM test with 2 NUMA nodes and merge_across_nodes = 0 -run_test ./ksm_tests -N -m 0 +CATEGORY="ksm_numa" run_test ./ksm_tests -N -m 0
# protection_keys tests if [ -x ./protection_keys_32 ] then
run_test ./protection_keys_32
CATEGORY="pkey" run_test ./protection_keys_32fi
if [ -x ./protection_keys_64 ] then
run_test ./protection_keys_64
CATEGORY="pkey" run_test ./protection_keys_64fi
exit $exitcode
2.31.1
Ok thanks for pointing that out!
Andrew, would it be possible to modify the patch and make the variable name VM_SELFTEST_ITEMS?
Cheers, -- Nico
On Tue, Jul 19, 2022 at 6:28 PM Joel Savitz jsavitz@redhat.com wrote:
Hello,
Sorry for the late reply.
Setting TEST_ITEMS="xx yy zz" and invoking the script has the same effect as passing -t "xx yy zz" to the script. VM_TEST_ITEMS may be a better env variable name however.
Best, Joel Savitz
On Fri, Jul 15, 2022 at 3:55 PM Nico Pache npache@redhat.com wrote:
Hi Andrew and Joel,
I noticed a flaw in switching to the cmdline argument over the environment variable. If you are utilizing the exerciser script (in tools/testing/selftests/run_kselftest.sh), this is not designed to pass cmdline variables to the individual TEST_PROGS. On the other hand if we utilize Env. variables we can still specify which tests we'd like to run. Our infrastructure is designed to utilize this wrapper, so we inevitably will not be able to use this the way we thought.
Would you be ok with switching back to the initial approach? If so I believe making the name more specific would be ideal, ie) VM_TEST_ITEMS.
Cheers, -- Nico
On Wed, Jul 6, 2022 at 4:55 PM Joel Savitz jsavitz@redhat.com wrote:
Our memory management kernel CI testing at Red Hat uses the VM selftests and we have run into two problems:
First, our LTP tests overlap with the VM selftests.
We want to avoid unhelpful redundancy in our testing practices.
Second, we have observed the current run_vmtests.sh to report overall failure/ambiguous results in the case that a machine lacks the necessary hardware to perform one or more of the tests. E.g. ksm tests that require more than one numa node.
We want to be able to run the vm selftests suitable to particular hardware.
Add the ability to run one or more groups of vm tests via run_vmtests.sh instead of simply all-or-none in order to solve these problems.
Preserve existing default behavior of running all tests when the script is invoked with no arguments.
Documentation of test groups is included in the patch as follows:
# ./run_vmtests.sh [ -h || --help ] usage: ./tools/testing/selftests/vm/run_vmtests.sh [ -h | -t "<categories>"] -t: specify specific categories to tests to run -h: display this message The default behavior is to run all tests. Alternatively, specific groups tests can be run by passing a string to the -t argument containing one or more of the following categories separated by spaces: - mmap tests for mmap(2) - gup_test tests for gup using gup_test interface - userfaultfd tests for userfaultfd(2) - compaction a test for the patch "Allow compaction of unevictable pages" - mlock tests for mlock(2) - mremap tests for mremap(2) - hugevm tests for very large virtual address space - vmalloc vmalloc smoke tests - hmm hmm smoke tests - madv_populate test memadvise(2) MADV_POPULATE_{READ,WRITE} options - memfd_secret test memfd_secret(2) - process_mrelease test process_mrelease(2) - ksm ksm tests that do not require >=2 NUMA nodes - ksm_numa ksm tests that require >=2 NUMA nodes - pkey memory protection key tests example: ./run_vmtests.sh -t "hmm mmap ksm"Changes from v2: - rebase onto the mm-everyting branch in https://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm.git - integrate this functionality with new the tests
Changes from v1: - use a command line argument to pass the test categories to the script instead of an environmet variable - remove novel prints to avoid messing with extant parsers of this script - update the usage text
Signed-off-by: Joel Savitz jsavitz@redhat.com
tools/testing/selftests/vm/run_vmtests.sh | 241 +++++++++++++++------- 1 file changed, 161 insertions(+), 80 deletions(-)
diff --git a/tools/testing/selftests/vm/run_vmtests.sh b/tools/testing/selftests/vm/run_vmtests.sh index d84fe0fa15e1..fb72a1338d07 100755 --- a/tools/testing/selftests/vm/run_vmtests.sh +++ b/tools/testing/selftests/vm/run_vmtests.sh @@ -1,6 +1,6 @@ #!/bin/bash # SPDX-License-Identifier: GPL-2.0 -#please run as root +# Please run as root
# Kselftest framework requirement - SKIP code is 4. ksft_skip=4 @@ -8,15 +8,75 @@ ksft_skip=4 mnt=./huge exitcode=0
-#get huge pagesize and freepages from /proc/meminfo -while read -r name size unit; do
if [ "$name" = "HugePages_Free:" ]; thenfreepgs="$size"fiif [ "$name" = "Hugepagesize:" ]; thenhpgsize_KB="$size"+usage() {
cat <<EOF+usage: ${BASH_SOURCE[0]:-$0} [ -h | -t "<categories>"]
- -t: specify specific categories to tests to run
- -h: display this message
+The default behavior is to run all tests.
+Alternatively, specific groups tests can be run by passing a string +to the -t argument containing one or more of the following categories +separated by spaces: +- mmap
tests for mmap(2)+- gup_test
tests for gup using gup_test interface+- userfaultfd
tests for userfaultfd(2)+- compaction
a test for the patch "Allow compaction of unevictable pages"+- mlock
tests for mlock(2)+- mremap
tests for mremap(2)+- hugevm
tests for very large virtual address space+- vmalloc
vmalloc smoke tests+- hmm
hmm smoke tests+- madv_populate
test memadvise(2) MADV_POPULATE_{READ,WRITE} options+- memfd_secret
test memfd_secret(2)+- process_mrelease
test process_mrelease(2)+- ksm
ksm tests that do not require >=2 NUMA nodes+- ksm_numa
ksm tests that require >=2 NUMA nodes+- pkey
memory protection key tests+example: ./run_vmtests.sh -t "hmm mmap ksm" +EOF
exit 0+}
+while getopts "ht:" OPT; do
case ${OPT} in"h") usage ;;"t") TEST_ITEMS=${OPTARG} ;;esac+done +shift $((OPTIND -1))
+# default behavior: run all tests +TEST_ITEMS=${TEST_ITEMS:-default}
+test_selected() {
if [ "$TEST_ITEMS" == "default" ]; then# If no TEST_ITEMS are specified, run all testsreturn 0 fi-done < /proc/meminfo
echo ${TEST_ITEMS} | grep ${1} 2>&1 >/dev/nullreturn ${?}+}
+# Hugepage setup only needed for hugetlb tests +if test_selected "hugetlb"; then
# Simple hugetlbfs tests have a hardcoded minimum requirement of # huge pages totaling 256MB (262144KB) in size. The userfaultfd @@ -28,7 +88,17 @@ hpgsize_MB=$((hpgsize_KB / 1024)) half_ufd_size_MB=$((((nr_cpus * hpgsize_MB + 127) / 128) * 128)) needmem_KB=$((half_ufd_size_MB * 2 * 1024))
-#set proper nr_hugepages +# get huge pagesize and freepages from /proc/meminfo +while read -r name size unit; do
if [ "$name" = "HugePages_Free:" ]; thenfreepgs="$size"fiif [ "$name" = "Hugepagesize:" ]; thenhpgsize_KB="$size"fi+done < /proc/meminfo
+# set proper nr_hugepages if [ -n "$freepgs" ] && [ -n "$hpgsize_KB" ]; then nr_hugepgs=$(cat /proc/sys/vm/nr_hugepages) needpgs=$((needmem_KB / hpgsize_KB)) @@ -57,144 +127,155 @@ else exit 1 fi
-#filter 64bit architectures +fi # test_selected "hugetlb"
+# filter 64bit architectures ARCH64STR="arm64 ia64 mips64 parisc64 ppc64 ppc64le riscv64 s390x sh64 sparc64 x86_64" if [ -z "$ARCH" ]; then ARCH=$(uname -m 2>/dev/null | sed -e 's/aarch64.*/arm64/') fi VADDR64=0 -echo "$ARCH64STR" | grep "$ARCH" && VADDR64=1 +echo "$ARCH64STR" | grep "$ARCH" &>/dev/null && VADDR64=1
# Usage: run_test [test binary] [arbitrary test arguments...] run_test() {
local title="running $*"local sep=$(echo -n "$title" | tr "[:graph:][:space:]" -)printf "%s\n%s\n%s\n" "$sep" "$title" "$sep""$@"local ret=$?if [ $ret -eq 0 ]; thenecho "[PASS]"elif [ $ret -eq $ksft_skip ]; thenecho "[SKIP]"exitcode=$ksft_skipelseecho "[FAIL]"exitcode=1fi
if test_selected ${CATEGORY}; thenlocal title="running $*"local sep=$(echo -n "$title" | tr "[:graph:][:space:]" -)printf "%s\n%s\n%s\n" "$sep" "$title" "$sep""$@"local ret=$?if [ $ret -eq 0 ]; thenecho "[PASS]"elif [ $ret -eq $ksft_skip ]; thenecho "[SKIP]"exitcode=$ksft_skipelseecho "[FAIL]"exitcode=1fifi # test_selected}
-mkdir "$mnt" -mount -t hugetlbfs none "$mnt" +# setup only needed for hugetlb tests +if test_selected "hugetlb"; then
mkdir "$mnt"mount -t hugetlbfs none "$mnt"+fi
-run_test ./hugepage-mmap +CATEGORY="hugetlb" run_test ./hugepage-mmap
shmmax=$(cat /proc/sys/kernel/shmmax) shmall=$(cat /proc/sys/kernel/shmall) echo 268435456 > /proc/sys/kernel/shmmax echo 4194304 > /proc/sys/kernel/shmall -run_test ./hugepage-shm +CATEGORY="hugetlb" run_test ./hugepage-shm echo "$shmmax" > /proc/sys/kernel/shmmax echo "$shmall" > /proc/sys/kernel/shmall
-run_test ./map_hugetlb +CATEGORY="hugetlb" run_test ./map_hugetlb
-run_test ./hugepage-mremap "$mnt"/huge_mremap -rm -f "$mnt"/huge_mremap +CATEGORY="hugetlb" run_test ./hugepage-mremap "$mnt"/huge_mremap +test_selected "hugetlb" && rm -f "$mnt"/huge_mremap
-run_test ./hugepage-vmemmap +CATEGORY="hugetlb" run_test ./hugepage-vmemmap
-run_test ./hugetlb-madvise "$mnt"/madvise-test -rm -f "$mnt"/madvise-test +CATEGORY="hugetlb" run_test ./hugetlb-madvise "$mnt"/madvise-test +test_selected "hugetlb" && rm -f "$mnt"/madvise-test
-echo "NOTE: The above hugetlb tests provide minimal coverage. Use" -echo " https://github.com/libhugetlbfs/libhugetlbfs.git for" -echo " hugetlb regression testing." +if test_selected "hugetlb"; then
echo "NOTE: These hugetlb tests provide minimal coverage. Use"echo " https://github.com/libhugetlbfs/libhugetlbfs.git for"echo " hugetlb regression testing."+fi
-run_test ./map_fixed_noreplace +CATEGORY="mmap" run_test ./map_fixed_noreplace
# get_user_pages_fast() benchmark -run_test ./gup_test -u +CATEGORY="gup_test" run_test ./gup_test -u # pin_user_pages_fast() benchmark -run_test ./gup_test -a +CATEGORY="gup_test" run_test ./gup_test -a # Dump pages 0, 19, and 4096, using pin_user_pages: -run_test ./gup_test -ct -F 0x1 0 19 0x1000 +CATEGORY="gup_test" run_test ./gup_test -ct -F 0x1 0 19 0x1000
-run_test ./userfaultfd anon 20 16 -run_test ./userfaultfd anon:dev 20 16 +CATEGORY="userfaultfd" run_test ./userfaultfd anon 20 16 +CATEGORY="userfaultfd" run_test ./userfaultfd anon:dev 20 16 # Hugetlb tests require source and destination huge pages. Pass in half the # size ($half_ufd_size_MB), which is used for *each*. -run_test ./userfaultfd hugetlb "$half_ufd_size_MB" 32 -run_test ./userfaultfd hugetlb:dev "$half_ufd_size_MB" 32 -run_test ./userfaultfd hugetlb_shared "$half_ufd_size_MB" 32 "$mnt"/uffd-test +CATEGORY="userfaultfd" run_test ./userfaultfd hugetlb "$half_ufd_size_MB" 32 +CATEGORY="userfaultfd" run_test ./userfaultfd hugetlb:dev "$half_ufd_size_MB" 32 +CATEGORY="userfaultfd" run_test ./userfaultfd hugetlb_shared "$half_ufd_size_MB" 32 "$mnt"/uffd-test rm -f "$mnt"/uffd-test -run_test ./userfaultfd hugetlb_shared:dev "$half_ufd_size_MB" 32 "$mnt"/uffd-test +CATEGORY="userfaultfd" run_test ./userfaultfd hugetlb_shared:dev "$half_ufd_size_MB" 32 "$mnt"/uffd-test rm -f "$mnt"/uffd-test -run_test ./userfaultfd shmem 20 16 -run_test ./userfaultfd shmem:dev 20 16
-#cleanup -umount "$mnt" -rm -rf "$mnt" -echo "$nr_hugepgs" > /proc/sys/vm/nr_hugepages +CATEGORY="userfaultfd" run_test ./userfaultfd shmem 20 16 +CATEGORY="userfaultfd" run_test ./userfaultfd shmem:dev 20 16
+# cleanup (only needed when running hugetlb tests) +if test_selected "hugetlb"; then
umount "$mnt"rm -rf "$mnt"echo "$nr_hugepgs" > /proc/sys/vm/nr_hugepages+fi
-run_test ./compaction_test +CATEGORY="compaction" run_test ./compaction_test
-run_test sudo -u nobody ./on-fault-limit +CATEGORY="mlock" run_test sudo -u nobody ./on-fault-limit
-run_test ./map_populate +CATEGORY="mmap" run_test ./map_populate
-run_test ./mlock-random-test +CATEGORY="mlock" run_test ./mlock-random-test
-run_test ./mlock2-tests +CATEGORY="mlock" run_test ./mlock2-tests
-run_test ./mrelease_test +CATEGORY="process_mrelease" run_test ./mrelease_test
-run_test ./mremap_test +CATEGORY="mremap" run_test ./mremap_test
-run_test ./thuge-gen +CATEGORY="hugetlb" run_test ./thuge-gen
if [ $VADDR64 -ne 0 ]; then
run_test ./virtual_address_range
CATEGORY="hugevm" run_test ./virtual_address_range # virtual address 128TB switch test
run_test ./va_128TBswitch.sh
CATEGORY="hugevm" run_test ./va_128TBswitch.shfi # VADDR64
# vmalloc stability smoke test -run_test ./test_vmalloc.sh smoke +CATEGORY="vmalloc" run_test ./test_vmalloc.sh smoke
-run_test ./mremap_dontunmap +CATEGORY="mremap" run_test ./mremap_dontunmap
-run_test ./test_hmm.sh smoke +CATEGORY="hmm" run_test ./test_hmm.sh smoke
# MADV_POPULATE_READ and MADV_POPULATE_WRITE tests -run_test ./madv_populate +CATEGORY="madv_populate" run_test ./madv_populate
-run_test ./memfd_secret +CATEGORY="memfd_secret" run_test ./memfd_secret
# KSM MADV_MERGEABLE test with 10 identical pages -run_test ./ksm_tests -M -p 10 +CATEGORY="ksm" run_test ./ksm_tests -M -p 10 # KSM unmerge test -run_test ./ksm_tests -U +CATEGORY="ksm" run_test ./ksm_tests -U # KSM test with 10 zero pages and use_zero_pages = 0 -run_test ./ksm_tests -Z -p 10 -z 0 +CATEGORY="ksm" run_test ./ksm_tests -Z -p 10 -z 0 # KSM test with 10 zero pages and use_zero_pages = 1 -run_test ./ksm_tests -Z -p 10 -z 1 +CATEGORY="ksm" run_test ./ksm_tests -Z -p 10 -z 1 # KSM test with 2 NUMA nodes and merge_across_nodes = 1 -run_test ./ksm_tests -N -m 1 +CATEGORY="ksm_numa" run_test ./ksm_tests -N -m 1 # KSM test with 2 NUMA nodes and merge_across_nodes = 0 -run_test ./ksm_tests -N -m 0 +CATEGORY="ksm_numa" run_test ./ksm_tests -N -m 0
# protection_keys tests if [ -x ./protection_keys_32 ] then
run_test ./protection_keys_32
CATEGORY="pkey" run_test ./protection_keys_32fi
if [ -x ./protection_keys_64 ] then
run_test ./protection_keys_64
CATEGORY="pkey" run_test ./protection_keys_64fi
exit $exitcode
2.31.1
On Tue, 26 Jul 2022 06:31:29 -0400 Nico Pache npache@redhat.com wrote:
Ok thanks for pointing that out!
Andrew, would it be possible to modify the patch and make the variable name VM_SELFTEST_ITEMS?
Sure. Please send a new patch against linux-next late this week.
On 7/19/22 4:27 PM, Joel Savitz wrote:
Hello,
Sorry for the late reply.
Setting TEST_ITEMS="xx yy zz" and invoking the script has the same effect as passing -t "xx yy zz" to the script. VM_TEST_ITEMS may be a better env variable name however.
Best, Joel Savitz
When you are respoding on kernel mailing lists, please bottom post. Refer to the kernel mailing list communication guidelines.
On Fri, Jul 15, 2022 at 3:55 PM Nico Pache npache@redhat.com wrote:
Hi Andrew and Joel,
I noticed a flaw in switching to the cmdline argument over the environment variable. If you are utilizing the exerciser script (in tools/testing/selftests/run_kselftest.sh), this is not designed to pass cmdline variables to the individual TEST_PROGS. On the other hand if we utilize Env. variables we can still specify which tests we'd like to run. Our infrastructure is designed to utilize this wrapper, so we inevitably will not be able to use this the way we thought.
Would you be ok with switching back to the initial approach? If so I believe making the name more specific would be ideal, ie) VM_TEST_ITEMS.
Cheers, -- Nico
On Wed, Jul 6, 2022 at 4:55 PM Joel Savitz jsavitz@redhat.com wrote:
Our memory management kernel CI testing at Red Hat uses the VM selftests and we have run into two problems:
First, our LTP tests overlap with the VM selftests.
We want to avoid unhelpful redundancy in our testing practices.
Second, we have observed the current run_vmtests.sh to report overall failure/ambiguous results in the case that a machine lacks the necessary hardware to perform one or more of the tests. E.g. ksm tests that require more than one numa node.
We want to be able to run the vm selftests suitable to particular hardware.
Add the ability to run one or more groups of vm tests via run_vmtests.sh instead of simply all-or-none in order to solve these problems.
Preserve existing default behavior of running all tests when the script is invoked with no arguments.
Documentation of test groups is included in the patch as follows:
# ./run_vmtests.sh [ -h || --help ] usage: ./tools/testing/selftests/vm/run_vmtests.sh [ -h | -t "<categories>"] -t: specify specific categories to tests to run -h: display this message The default behavior is to run all tests. Alternatively, specific groups tests can be run by passing a string to the -t argument containing one or more of the following categories separated by spaces: - mmap tests for mmap(2) - gup_test tests for gup using gup_test interface - userfaultfd tests for userfaultfd(2) - compaction a test for the patch "Allow compaction of unevictable pages" - mlock tests for mlock(2) - mremap tests for mremap(2) - hugevm tests for very large virtual address space - vmalloc vmalloc smoke tests - hmm hmm smoke tests - madv_populate test memadvise(2) MADV_POPULATE_{READ,WRITE} options - memfd_secret test memfd_secret(2) - process_mrelease test process_mrelease(2) - ksm ksm tests that do not require >=2 NUMA nodes - ksm_numa ksm tests that require >=2 NUMA nodes - pkey memory protection key tests example: ./run_vmtests.sh -t "hmm mmap ksm"Changes from v2: - rebase onto the mm-everyting branch in https://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm.git - integrate this functionality with new the tests
Changes from v1: - use a command line argument to pass the test categories to the script instead of an environmet variable - remove novel prints to avoid messing with extant parsers of this script - update the usage text
Signed-off-by: Joel Savitz jsavitz@redhat.com
tools/testing/selftests/vm/run_vmtests.sh | 241 +++++++++++++++------- 1 file changed, 161 insertions(+), 80 deletions(-)
diff --git a/tools/testing/selftests/vm/run_vmtests.sh b/tools/testing/selftests/vm/run_vmtests.sh index d84fe0fa15e1..fb72a1338d07 100755 --- a/tools/testing/selftests/vm/run_vmtests.sh +++ b/tools/testing/selftests/vm/run_vmtests.sh @@ -1,6 +1,6 @@ #!/bin/bash # SPDX-License-Identifier: GPL-2.0 -#please run as root +# Please run as root
# Kselftest framework requirement - SKIP code is 4. ksft_skip=4 @@ -8,15 +8,75 @@ ksft_skip=4 mnt=./huge exitcode=0
-#get huge pagesize and freepages from /proc/meminfo -while read -r name size unit; do
if [ "$name" = "HugePages_Free:" ]; thenfreepgs="$size"fiif [ "$name" = "Hugepagesize:" ]; thenhpgsize_KB="$size"+usage() {
cat <<EOF+usage: ${BASH_SOURCE[0]:-$0} [ -h | -t "<categories>"]
- -t: specify specific categories to tests to run
- -h: display this message
+The default behavior is to run all tests.
+Alternatively, specific groups tests can be run by passing a string +to the -t argument containing one or more of the following categories +separated by spaces: +- mmap
tests for mmap(2)+- gup_test
tests for gup using gup_test interface+- userfaultfd
tests for userfaultfd(2)+- compaction
a test for the patch "Allow compaction of unevictable pages"+- mlock
tests for mlock(2)+- mremap
tests for mremap(2)+- hugevm
tests for very large virtual address space+- vmalloc
vmalloc smoke tests+- hmm
hmm smoke tests+- madv_populate
test memadvise(2) MADV_POPULATE_{READ,WRITE} options+- memfd_secret
test memfd_secret(2)+- process_mrelease
test process_mrelease(2)+- ksm
ksm tests that do not require >=2 NUMA nodes+- ksm_numa
ksm tests that require >=2 NUMA nodes+- pkey
memory protection key tests+example: ./run_vmtests.sh -t "hmm mmap ksm" +EOF
exit 0+}
+while getopts "ht:" OPT; do
case ${OPT} in"h") usage ;;"t") TEST_ITEMS=${OPTARG} ;;esac+done +shift $((OPTIND -1))
+# default behavior: run all tests +TEST_ITEMS=${TEST_ITEMS:-default}
+test_selected() {
if [ "$TEST_ITEMS" == "default" ]; then# If no TEST_ITEMS are specified, run all testsreturn 0 fi-done < /proc/meminfo
echo ${TEST_ITEMS} | grep ${1} 2>&1 >/dev/nullreturn ${?}+}
+# Hugepage setup only needed for hugetlb tests +if test_selected "hugetlb"; then
# Simple hugetlbfs tests have a hardcoded minimum requirement of # huge pages totaling 256MB (262144KB) in size. The userfaultfd @@ -28,7 +88,17 @@ hpgsize_MB=$((hpgsize_KB / 1024)) half_ufd_size_MB=$((((nr_cpus * hpgsize_MB + 127) / 128) * 128)) needmem_KB=$((half_ufd_size_MB * 2 * 1024))
-#set proper nr_hugepages +# get huge pagesize and freepages from /proc/meminfo +while read -r name size unit; do
if [ "$name" = "HugePages_Free:" ]; thenfreepgs="$size"fiif [ "$name" = "Hugepagesize:" ]; thenhpgsize_KB="$size"fi+done < /proc/meminfo
+# set proper nr_hugepages if [ -n "$freepgs" ] && [ -n "$hpgsize_KB" ]; then nr_hugepgs=$(cat /proc/sys/vm/nr_hugepages) needpgs=$((needmem_KB / hpgsize_KB)) @@ -57,144 +127,155 @@ else exit 1 fi
-#filter 64bit architectures +fi # test_selected "hugetlb"
+# filter 64bit architectures ARCH64STR="arm64 ia64 mips64 parisc64 ppc64 ppc64le riscv64 s390x sh64 sparc64 x86_64" if [ -z "$ARCH" ]; then ARCH=$(uname -m 2>/dev/null | sed -e 's/aarch64.*/arm64/') fi VADDR64=0 -echo "$ARCH64STR" | grep "$ARCH" && VADDR64=1 +echo "$ARCH64STR" | grep "$ARCH" &>/dev/null && VADDR64=1
# Usage: run_test [test binary] [arbitrary test arguments...] run_test() {
local title="running $*"local sep=$(echo -n "$title" | tr "[:graph:][:space:]" -)printf "%s\n%s\n%s\n" "$sep" "$title" "$sep""$@"local ret=$?if [ $ret -eq 0 ]; thenecho "[PASS]"elif [ $ret -eq $ksft_skip ]; thenecho "[SKIP]"exitcode=$ksft_skipelseecho "[FAIL]"exitcode=1fi
if test_selected ${CATEGORY}; thenlocal title="running $*"local sep=$(echo -n "$title" | tr "[:graph:][:space:]" -)printf "%s\n%s\n%s\n" "$sep" "$title" "$sep""$@"local ret=$?if [ $ret -eq 0 ]; thenecho "[PASS]"elif [ $ret -eq $ksft_skip ]; thenecho "[SKIP]"exitcode=$ksft_skipelseecho "[FAIL]"exitcode=1fifi # test_selected-mkdir "$mnt" -mount -t hugetlbfs none "$mnt" +# setup only needed for hugetlb tests +if test_selected "hugetlb"; then
mkdir "$mnt"mount -t hugetlbfs none "$mnt"+fi
-run_test ./hugepage-mmap +CATEGORY="hugetlb" run_test ./hugepage-mmap
shmmax=$(cat /proc/sys/kernel/shmmax) shmall=$(cat /proc/sys/kernel/shmall) echo 268435456 > /proc/sys/kernel/shmmax echo 4194304 > /proc/sys/kernel/shmall -run_test ./hugepage-shm +CATEGORY="hugetlb" run_test ./hugepage-shm echo "$shmmax" > /proc/sys/kernel/shmmax echo "$shmall" > /proc/sys/kernel/shmall
-run_test ./map_hugetlb +CATEGORY="hugetlb" run_test ./map_hugetlb
-run_test ./hugepage-mremap "$mnt"/huge_mremap -rm -f "$mnt"/huge_mremap +CATEGORY="hugetlb" run_test ./hugepage-mremap "$mnt"/huge_mremap +test_selected "hugetlb" && rm -f "$mnt"/huge_mremap
-run_test ./hugepage-vmemmap +CATEGORY="hugetlb" run_test ./hugepage-vmemmap
-run_test ./hugetlb-madvise "$mnt"/madvise-test -rm -f "$mnt"/madvise-test +CATEGORY="hugetlb" run_test ./hugetlb-madvise "$mnt"/madvise-test +test_selected "hugetlb" && rm -f "$mnt"/madvise-test
-echo "NOTE: The above hugetlb tests provide minimal coverage. Use" -echo " https://github.com/libhugetlbfs/libhugetlbfs.git for" -echo " hugetlb regression testing." +if test_selected "hugetlb"; then
echo "NOTE: These hugetlb tests provide minimal coverage. Use"echo " https://github.com/libhugetlbfs/libhugetlbfs.git for"echo " hugetlb regression testing."+fi
-run_test ./map_fixed_noreplace +CATEGORY="mmap" run_test ./map_fixed_noreplace
# get_user_pages_fast() benchmark -run_test ./gup_test -u +CATEGORY="gup_test" run_test ./gup_test -u # pin_user_pages_fast() benchmark -run_test ./gup_test -a +CATEGORY="gup_test" run_test ./gup_test -a # Dump pages 0, 19, and 4096, using pin_user_pages: -run_test ./gup_test -ct -F 0x1 0 19 0x1000 +CATEGORY="gup_test" run_test ./gup_test -ct -F 0x1 0 19 0x1000
-run_test ./userfaultfd anon 20 16 -run_test ./userfaultfd anon:dev 20 16 +CATEGORY="userfaultfd" run_test ./userfaultfd anon 20 16 +CATEGORY="userfaultfd" run_test ./userfaultfd anon:dev 20 16 # Hugetlb tests require source and destination huge pages. Pass in half the # size ($half_ufd_size_MB), which is used for *each*. -run_test ./userfaultfd hugetlb "$half_ufd_size_MB" 32 -run_test ./userfaultfd hugetlb:dev "$half_ufd_size_MB" 32 -run_test ./userfaultfd hugetlb_shared "$half_ufd_size_MB" 32 "$mnt"/uffd-test +CATEGORY="userfaultfd" run_test ./userfaultfd hugetlb "$half_ufd_size_MB" 32 +CATEGORY="userfaultfd" run_test ./userfaultfd hugetlb:dev "$half_ufd_size_MB" 32 +CATEGORY="userfaultfd" run_test ./userfaultfd hugetlb_shared "$half_ufd_size_MB" 32 "$mnt"/uffd-test rm -f "$mnt"/uffd-test -run_test ./userfaultfd hugetlb_shared:dev "$half_ufd_size_MB" 32 "$mnt"/uffd-test +CATEGORY="userfaultfd" run_test ./userfaultfd hugetlb_shared:dev "$half_ufd_size_MB" 32 "$mnt"/uffd-test rm -f "$mnt"/uffd-test -run_test ./userfaultfd shmem 20 16 -run_test ./userfaultfd shmem:dev 20 16
-#cleanup -umount "$mnt" -rm -rf "$mnt" -echo "$nr_hugepgs" > /proc/sys/vm/nr_hugepages +CATEGORY="userfaultfd" run_test ./userfaultfd shmem 20 16 +CATEGORY="userfaultfd" run_test ./userfaultfd shmem:dev 20 16
+# cleanup (only needed when running hugetlb tests) +if test_selected "hugetlb"; then
umount "$mnt"rm -rf "$mnt"echo "$nr_hugepgs" > /proc/sys/vm/nr_hugepages+fi
-run_test ./compaction_test +CATEGORY="compaction" run_test ./compaction_test
-run_test sudo -u nobody ./on-fault-limit +CATEGORY="mlock" run_test sudo -u nobody ./on-fault-limit
-run_test ./map_populate +CATEGORY="mmap" run_test ./map_populate
-run_test ./mlock-random-test +CATEGORY="mlock" run_test ./mlock-random-test
-run_test ./mlock2-tests +CATEGORY="mlock" run_test ./mlock2-tests
-run_test ./mrelease_test +CATEGORY="process_mrelease" run_test ./mrelease_test
-run_test ./mremap_test +CATEGORY="mremap" run_test ./mremap_test
-run_test ./thuge-gen +CATEGORY="hugetlb" run_test ./thuge-gen
if [ $VADDR64 -ne 0 ]; then
run_test ./virtual_address_range
CATEGORY="hugevm" run_test ./virtual_address_range # virtual address 128TB switch test
run_test ./va_128TBswitch.sh
CATEGORY="hugevm" run_test ./va_128TBswitch.shfi # VADDR64
# vmalloc stability smoke test
-run_test ./test_vmalloc.sh smoke +CATEGORY="vmalloc" run_test ./test_vmalloc.sh smoke
-run_test ./mremap_dontunmap +CATEGORY="mremap" run_test ./mremap_dontunmap
-run_test ./test_hmm.sh smoke +CATEGORY="hmm" run_test ./test_hmm.sh smoke
# MADV_POPULATE_READ and MADV_POPULATE_WRITE tests -run_test ./madv_populate +CATEGORY="madv_populate" run_test ./madv_populate
-run_test ./memfd_secret +CATEGORY="memfd_secret" run_test ./memfd_secret
# KSM MADV_MERGEABLE test with 10 identical pages -run_test ./ksm_tests -M -p 10 +CATEGORY="ksm" run_test ./ksm_tests -M -p 10 # KSM unmerge test -run_test ./ksm_tests -U +CATEGORY="ksm" run_test ./ksm_tests -U # KSM test with 10 zero pages and use_zero_pages = 0 -run_test ./ksm_tests -Z -p 10 -z 0 +CATEGORY="ksm" run_test ./ksm_tests -Z -p 10 -z 0 # KSM test with 10 zero pages and use_zero_pages = 1 -run_test ./ksm_tests -Z -p 10 -z 1 +CATEGORY="ksm" run_test ./ksm_tests -Z -p 10 -z 1 # KSM test with 2 NUMA nodes and merge_across_nodes = 1 -run_test ./ksm_tests -N -m 1 +CATEGORY="ksm_numa" run_test ./ksm_tests -N -m 1 # KSM test with 2 NUMA nodes and merge_across_nodes = 0 -run_test ./ksm_tests -N -m 0 +CATEGORY="ksm_numa" run_test ./ksm_tests -N -m 0
# protection_keys tests if [ -x ./protection_keys_32 ] then
run_test ./protection_keys_32
CATEGORY="pkey" run_test ./protection_keys_32fi
if [ -x ./protection_keys_64 ] then
run_test ./protection_keys_64
CATEGORY="pkey" run_test ./protection_keys_64fi
exit $exitcode
-- 2.31.1
linux-kselftest-mirror@lists.linaro.org
-
Andrew Morton -
Joel Savitz -
Nico Pache -
Shuah Khan