Add new document covering CTI / CTM usage in CoreSight.
Add section in coresight.rst introducing CTI and CTM modules with link
to new document.
Signed-off-by: Mike Leach <mike.leach(a)linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose(a)arm.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier(a)linaro.org>
---
.../trace/coresight/coresight-ect.rst | 211 ++++++++++++++++++
Documentation/trace/coresight/coresight.rst | 13 ++
2 files changed, 224 insertions(+)
create mode 100644 Documentation/trace/coresight/coresight-ect.rst
diff --git a/Documentation/trace/coresight/coresight-ect.rst b/Documentation/trace/coresight/coresight-ect.rst
new file mode 100644
index 000000000000..3e06588f24fa
--- /dev/null
+++ b/Documentation/trace/coresight/coresight-ect.rst
@@ -0,0 +1,211 @@
+=============================================
+CoreSight Embedded Cross Trigger (CTI & CTM).
+=============================================
+
+ :Author: Mike Leach <mike.leach(a)linaro.org>
+ :Date: November 2019
+
+Hardware Description
+--------------------
+
+The CoreSight Cross Trigger Interface (CTI) is a hardware device that takes
+individual input and output hardware signals known as triggers to and from
+devices and interconnects them via the Cross Trigger Matrix (CTM) to other
+devices via numbered channels, in order to propagate events between devices.
+
+e.g.::
+
+ 0000000 in_trigs :::::::
+ 0 C 0----------->: : +======>(other CTI channel IO)
+ 0 P 0<-----------: : v
+ 0 U 0 out_trigs : : Channels ***** :::::::
+ 0000000 : CTI :<=========>*CTM*<====>: CTI :---+
+ ####### in_trigs : : (id 0-3) ***** ::::::: v
+ # ETM #----------->: : ^ #######
+ # #<-----------: : +---# ETR #
+ ####### out_trigs ::::::: #######
+
+The CTI driver enables the programming of the CTI to attach triggers to
+channels. When an input trigger becomes active, the attached channel will
+become active. Any output trigger attached to that channel will also
+become active. The active channel is propagated to other CTIs via the CTM,
+activating connected output triggers there, unless filtered by the CTI
+channel gate.
+
+It is also possible to activate a channel using system software directly
+programming registers in the CTI.
+
+The CTIs are registered by the system to be associated with CPUs and/or other
+CoreSight devices on the trace data path. When these devices are enabled the
+attached CTIs will also be enabled. By default/on power up the CTIs have
+no programmed trigger/channel attachments, so will not affect the system
+until explicitly programmed.
+
+The hardware trigger connections between CTIs and devices is implementation
+defined, unless the CPU/ETM combination is a v8 architecture, in which case
+the connections have an architecturally defined standard layout.
+
+The hardware trigger signals can also be connected to non-CoreSight devices
+(e.g. UART), or be propagated off chip as hardware IO lines.
+
+All the CTI devices are associated with a CTM. On many systems there will be a
+single effective CTM (one CTM, or multiple CTMs all interconnected), but it is
+possible that systems can have nets of CTIs+CTM that are not interconnected by
+a CTM to each other. On these systems a CTM index is declared to associate
+CTI devices that are interconnected via a given CTM.
+
+Sysfs files and directories
+---------------------------
+
+The CTI devices appear on the existing CoreSight bus alongside the other
+CoreSight devices::
+
+ >$ ls /sys/bus/coresight/devices
+ cti_cpu0 cti_cpu2 cti_sys0 etm0 etm2 funnel0 replicator0 tmc_etr0
+ cti_cpu1 cti_cpu3 cti_sys1 etm1 etm3 funnel1 tmc_etf0 tpiu0
+
+The ``cti_cpu<N>`` named CTIs are associated with a CPU, and any ETM used by
+that core. the ``cti_sys<N>`` CTIs are general system infrastructure CTIs that
+can be associated with other CoreSight devices, or other system hardware
+capable of generating or using trigger signals.::
+
+ >$ ls /sys/bus/coresight/devices/etm0/cti_cpu0
+ channels ctmid enable nr_trigger_cons mgmt power regs subsystem
+ triggers0 triggers1 uevent
+
+*Key file items are:-*
+ * ``enable``: enables/disables the CTI.
+ * ``ctmid`` : associated CTM - only relevant if system has multiple CTI+CTM
+ clusters that are not interconnected.
+ * ``nr_trigger_cons`` : total connections - triggers<N> directories.
+
+*Sub-directories:-*
+ * ``triggers<N>``: contains list of triggers for an individual connection.
+ * ``channels``: Contains the channel API - CTI main programming interface.
+ * ``regs``: Gives access to the raw programmable CTI regs.
+ * ``mgmt``: the standard CoreSight management registers.
+
+
+triggers<N> directories
+~~~~~~~~~~~~~~~~~~~~~~~
+
+Individual trigger connection information. This describes trigger signals for
+CoreSight and non-CoreSight connections.
+
+Each triggers directory has a set of parameters describing the triggers for
+the connection.
+
+ * ``name`` : name of connection
+ * ``in_signals`` : input trigger signal indexes used in this connection.
+ * ``in_types`` : functional types for in signals.
+ * ``out_signals`` : output trigger signals for this connection.
+ * ``out_types`` : functional types for out signals.
+
+e.g::
+
+ >$ ls ./cti_cpu0/triggers0/
+ in_signals in_types name out_signals out_types
+ >$ cat ./cti_cpu0/triggers0/name
+ cpu0
+ >$ cat ./cti_cpu0/triggers0/out_signals
+ 0-2
+ >$ cat ./cti_cpu0/triggers0/out_types
+ pe_edbgreq pe_dbgrestart pe_ctiirq
+ >$ cat ./cti_cpu0/triggers0/in_signals
+ 0-1
+ >$ cat ./cti_cpu0/triggers0/in_types
+ pe_dbgtrigger pe_pmuirq
+
+If a connection has zero signals in either the 'in' or 'out' triggers then
+those parameters will be omitted.
+
+Channels API Directory
+~~~~~~~~~~~~~~~~~~~~~~
+
+This provides an easy way to attach triggers to channels, without needing
+the multiple register operations that are required if manipulating the
+'regs' sub-dir elements directly.
+
+A number of files provide this API::
+
+ >$ ls ./cti_sys0/channels/
+ chan_clear chan_inuse chan_xtrigs_view trigin_detach
+ chan_free chan_pulse chan_xtrigs_view_sel trigout_attach
+ chan_gate_disable chan_set trig_filter_enable trigout_detach
+ chan_gate_enable chan_xtrigs_reset trigin_attach trigout_filtered
+
+Most access to these elements take the form::
+
+ echo <chan> [<trigger>] > /<device_path>/<operation>
+
+where the optional <trigger> is only needed for trigXX_attach | detach
+operations.
+
+e.g.::
+
+ >$ echo 0 1 > ./cti_sys0/channels/trigout_attach
+ >$ echo 0 > ./cti_sys0/channels/chan_set
+
+Attaches trigout(1) to channel(0), then activates channel(0) generating a
+set state on cti_sys0.trigout(1)
+
+
+*API operations*
+
+ * ``trigin_attach, trigout_attach``: Attach a channel to a trigger signal.
+ * ``trigin_detach, trigout_detach``: Detach a channel from a trigger signal.
+ * ``chan_set``: Set the channel - the set state will be propagated around
+ the CTM to other connected devices.
+ * ``chan_clear``: Clear the channel.
+ * ``chan_pulse``: Set the channel for a single CoreSight clock cycle.
+ * ``chan_gate_enable``: Write operation sets the CTI gate to propagate
+ (enable) the channel to other devices. This operation takes a channel
+ number. CTI gate is enabled for all channels by default at power up. Read
+ to list the currently enabled channels on the gate.
+ * ``chan_gate_disable``: Write channel number to disable gate for that
+ channel.
+ * ``chan_inuse``: Show the current channels attached to any signal
+ * ``chan_free``: Show channels with no attached signals.
+ * ``chan_xtrig_view``: write a channel number to select a channel to view,
+ read to show the cross triggers programmed for the selected channel.
+ * ``trig_filter_enable``: Defaults to enabled, disable to allow potentially
+ dangerous output signals to be set.
+ * ``trigout_filtered``: Trigger out signals that are prevented from being
+ set if filtering ``trig_filter_enable`` is enabled. One use is to prevent
+ accidental ``EDBGREQ`` signals stopping a core.
+ * ``chan_xtrigs_reset``: Write 1 to clear all channel / trigger programming.
+ Resets device hardware to default state.
+
+
+The example below attaches input trigger index 1 to channel 2, and output
+trigger index 6 to the same channel. It then examines the state of the
+channel / trigger connections using the appropriate sysfs attributes.
+
+The settings mean that if either input trigger 1, or channel 2 go active then
+trigger out 6 will go active. We then enable the CTI, and use the software
+channel control to activate channel 2. We see the active channel on the
+``choutstatus`` register and the active signal on the ``trigoutstatus``
+register. Finally clearing the channel removes this.
+
+e.g.::
+
+ .../cti_sys0/channels# echo 2 1 > trigin_attach
+ .../cti_sys0/channels# echo 2 6 > trigout_attach
+ .../cti_sys0/channels# cat chan_free
+ 0-1,3
+ .../cti_sys0/channels# cat chan_inuse
+ 2
+ .../cti_sys0/channels# echo 2 > chan_xtrigs_view
+ .../cti_sys0/channels# cat chan_xtrigs_view
+ [2] IN: 1 OUT: 6
+ .../cti_sys0/# echo 1 > enable
+ .../cti_sys0/channels# echo 2 > chan_set
+ .../cti_sys0/channels# cat ../regs/choutstatus
+ 0x4
+ .../cti_sys0/channels# cat ../regs/trigoutstatus
+ 0x40
+ .../cti_sys0/channels# echo 2 > chan_clear
+ .../cti_sys0/channels# cat ../regs/trigoutstatus
+ 0x0
+ .../cti_sys0/channels# cat ../regs/choutstatus
+ 0x0
diff --git a/Documentation/trace/coresight/coresight.rst b/Documentation/trace/coresight/coresight.rst
index a566719f8e7e..108600ee1e12 100644
--- a/Documentation/trace/coresight/coresight.rst
+++ b/Documentation/trace/coresight/coresight.rst
@@ -491,8 +491,21 @@ interface provided for that purpose by the generic STM API::
Details on how to use the generic STM API can be found here:- :doc:`../stm` [#second]_.
+The CTI & CTM Modules
+---------------------
+
+The CTI (Cross Trigger Interface) provides a set of trigger signals between
+individual CTIs and components, and can propagate these between all CTIs via
+channels on the CTM (Cross Trigger Matrix).
+
+A separate documentation file is provided to explain the use of these devices.
+(:doc:`coresight-ect`) [#fourth]_.
+
+
.. [#first] Documentation/ABI/testing/sysfs-bus-coresight-devices-stm
.. [#second] Documentation/trace/stm.rst
.. [#third] https://github.com/Linaro/perf-opencsd
+
+.. [#fourth] Documentation/trace/coresight/coresight-ect.rst
--
2.17.1
Bonjour,
Je vous écris concernant la gestion des voitures de société.
Grâce aux riches fonctionnalités de l'outil GPS, qui surveille chaque voiture en continu, vous pouvez enregistrer la position, l'heure et le kilométrage des voitures en temps réel.
En conséquence, les coûts d'entretien de la flotte de l'entreprise sont réduits de 20% et le temps de trajet ou la planification de la livraison sont considérablement réduits. 49 000 entreprises coopérant avec nous sont à l'origine du succès de nos solutions.
Si le sujet vous semble intéressant, merci de me contacter.
Veuillez recevoir mes plus cordiales salutations.
Nathalie Benoit
Gestionnaire de service à la clientèle
n.benoit(a)megasuccess.eu
Adds new coresight-cti.yaml file describing the bindings required to define
CTI in the device trees.
Adds an include file to dt-bindings/arm to define constants describing
common signal functionality used in CoreSight and generic usage.
Signed-off-by: Mike Leach <mike.leach(a)linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier(a)linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose(a)arm.com>
---
.../bindings/arm/coresight-cti.yaml | 326 ++++++++++++++++++
.../devicetree/bindings/arm/coresight.txt | 7 +
MAINTAINERS | 2 +
include/dt-bindings/arm/coresight-cti-dt.h | 37 ++
4 files changed, 372 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/coresight-cti.yaml
create mode 100644 include/dt-bindings/arm/coresight-cti-dt.h
diff --git a/Documentation/devicetree/bindings/arm/coresight-cti.yaml b/Documentation/devicetree/bindings/arm/coresight-cti.yaml
new file mode 100644
index 000000000000..e4d28cee5dfd
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/coresight-cti.yaml
@@ -0,0 +1,326 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+# Copyright 2019 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/coresight-cti.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Coresight Cross Trigger Interface (CTI) device.
+
+description: |
+ The CoreSight Embedded Cross Trigger (ECT) consists of CTI devices connected
+ to one or more CoreSight components and/or a CPU, with CTIs interconnected in
+ a star topology via the Cross Trigger Matrix (CTM), which is not programmable.
+ The ECT components are not part of the trace generation data path and are thus
+ not part of the CoreSight graph described in the general CoreSight bindings
+ file coresight.txt.
+
+ The CTI component properties define the connections between the individual
+ CTI and the components it is directly connected to, consisting of input and
+ output hardware trigger signals. CTIs can have a maximum number of input and
+ output hardware trigger signals (8 each for v1 CTI, 32 each for v2 CTI). The
+ number is defined at design time, the maximum of each defined in the DEVID
+ register.
+
+ CTIs are interconnected in a star topology via the CTM, using a number of
+ programmable channels, usually 4, but again implementation defined and
+ described in the DEVID register. The star topology is not required to be
+ described in the bindings as the actual connections are software
+ programmable.
+
+ In general the connections between CTI and components via the trigger signals
+ are implementation defined, except when the CTI is connected to an ARM v8
+ architecture core and optional ETM.
+
+ In this case the ARM v8 architecture defines the required signal connections
+ between CTI and the CPU core and ETM if present. In the case of a v8
+ architecturally connected CTI an additional compatible string is used to
+ indicate this feature (arm,coresight-cti-v8-arch).
+
+ When CTI trigger connection information is unavailable then a minimal driver
+ binding can be declared with no explicit trigger signals. This will result
+ the driver detecting the maximum available triggers and channels from the
+ DEVID register and make them all available for use as a single default
+ connection. Any user / client application will require additional information
+ on the connections between the CTI and other components for correct operation.
+ This information might be found by enabling the Integration Test registers in
+ the driver (set CONFIG_CORESIGHT_CTI_INTEGRATION_TEST in Kernel
+ configuration). These registers may be used to explore the trigger connections
+ between CTI and other CoreSight components.
+
+ Certain triggers between CoreSight devices and the CTI have specific types
+ and usages. These can be defined along with the signal indexes with the
+ constants defined in <dt-bindings/arm/coresight-cti-dt.h>
+
+ For example a CTI connected to a core will usually have a DBGREQ signal. This
+ is defined in the binding as type PE_EDBGREQ. These types will appear in an
+ optional array alongside the signal indexes. Omitting types will default all
+ signals to GEN_IO.
+
+ Note that some hardware trigger signals can be connected to non-CoreSight
+ components (e.g. UART etc) depending on hardware implementation.
+
+maintainers:
+ - Mike Leach <mike.leach(a)linaro.org>
+
+allOf:
+ - $ref: /schemas/arm/primecell.yaml#
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - arm,coresight-cti
+ required:
+ - compatible
+
+properties:
+ $nodename:
+ pattern: "^cti(@[0-9a-f]+)$"
+ compatible:
+ oneOf:
+ - items:
+ - const: arm,coresight-cti
+ - const: arm,primecell
+ - items:
+ - const: arm,coresight-cti-v8-arch
+ - const: arm,coresight-cti
+ - const: arm,primecell
+
+ reg:
+ maxItems: 1
+
+ cpu:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Handle to cpu this device is associated with. This must appear in the
+ base cti node if compatible string arm,coresight-cti-v8-arch is used,
+ or may appear in a trig-conns child node when appropriate.
+
+ arm,cti-ctm-id:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Defines the CTM this CTI is connected to, in large systems with multiple
+ separate CTI/CTM nets. Typically multi-socket systems where the CTM is
+ propagated between sockets.
+
+ arm,cs-dev-assoc:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ defines a phandle reference to an associated CoreSight trace device.
+ When the associated trace device is enabled, then the respective CTI
+ will be enabled. Use in a trig-conns node, or in CTI base node when
+ compatible string arm,coresight-cti-v8-arch used. If the associated
+ device has not been registered then the node name will be stored as
+ the connection name for later resolution. If the associated device is
+ not a CoreSight device or not registered then the node name will remain
+ the connection name and automatic enabling will not occur.
+
+patternProperties:
+ '^trig-conns@([0-9]+)$':
+ type: object
+ description:
+ A trigger connections child node which describes the trigger signals
+ between this CTI and another hardware device. This device may be a CPU,
+ CoreSight device, any other hardware device or simple external IO lines.
+ The connection may have both input and output triggers, or only one or the
+ other.
+
+ properties:
+
+ arm,trig-in-sigs:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 32
+ description:
+ List of CTI trigger in signal numbers in use by a trig-conns node.
+
+ arm,trig-in-types:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 32
+ description:
+ List of constants representing the types for the CTI trigger in
+ signals. Types in this array match to the corresponding signal in the
+ arm,trig-in-sigs array. If the -types array is smaller, or omitted
+ completely, then the types will default to GEN_IO.
+
+ arm,trig-out-sigs:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 32
+ description:
+ List of CTI trigger out signal numbers in use by a trig-conns node.
+
+ arm,trig-out-types:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 32
+ description:
+ List of constants representing the types for the CTI trigger out
+ signals. Types in this array match to the corresponding signal
+ in the arm,trig-out-sigs array. If the "-types" array is smaller,
+ or omitted completely, then the types will default to GEN_IO.
+
+ arm,trig-filters:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 32
+ description:
+ List of CTI trigger out signals that will be blocked from becoming
+ active, unless filtering is disabled on the driver.
+
+ arm,trig-conn-name:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/string
+ description:
+ Defines a connection name that will be displayed, if the cpu or
+ arm,cs-dev-assoc properties are not being used in this connection.
+ Principle use for CTI that are connected to non-CoreSight devices, or
+ external IO.
+
+ anyOf:
+ - required:
+ - arm,trig-in-sigs
+ - required:
+ - arm,trig-out-sigs
+ oneOf:
+ - required:
+ - arm,trig-conn-name
+ - required:
+ - cpu
+ - required:
+ - arm,cs-dev-assoc
+ required:
+ - reg
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+
+if:
+ properties:
+ compatible:
+ contains:
+ const: arm,coresight-cti-v8-arch
+
+then:
+ required:
+ - cpu
+
+examples:
+ # minimum CTI definition. DEVID register used to set number of triggers.
+ - |
+ cti@20020000 {
+ compatible = "arm,coresight-cti", "arm,primecell";
+ reg = <0x20020000 0x1000>;
+
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ };
+ # v8 architecturally defined CTI - CPU + ETM connections generated by the
+ # driver according to the v8 architecture specification.
+ - |
+ cti@859000 {
+ compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+ "arm,primecell";
+ reg = <0x859000 0x1000>;
+
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+
+ cpu = <&CPU1>;
+ arm,cs-dev-assoc = <&etm1>;
+ };
+ # Implementation defined CTI - CPU + ETM connections explicitly defined..
+ # Shows use of type constants from dt-bindings/arm/coresight-cti-dt.h
+ - |
+ #include <dt-bindings/arm/coresight-cti-dt.h>
+
+ cti@858000 {
+ compatible = "arm,coresight-cti", "arm,primecell";
+ reg = <0x858000 0x1000>;
+
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+
+ arm,cti-ctm-id = <1>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ trig-conns@0 {
+ reg = <0>;
+ arm,trig-in-sigs = <4 5 6 7>;
+ arm,trig-in-types = <ETM_EXTOUT
+ ETM_EXTOUT
+ ETM_EXTOUT
+ ETM_EXTOUT>;
+ arm,trig-out-sigs = <4 5 6 7>;
+ arm,trig-out-types = <ETM_EXTIN
+ ETM_EXTIN
+ ETM_EXTIN
+ ETM_EXTIN>;
+ arm,cs-dev-assoc = <&etm0>;
+ };
+
+ trig-conns@1 {
+ reg = <1>;
+ cpu = <&CPU0>;
+ arm,trig-in-sigs = <0 1>;
+ arm,trig-in-types = <PE_DBGTRIGGER
+ PE_PMUIRQ>;
+ arm,trig-out-sigs=<0 1 2 >;
+ arm,trig-out-types = <PE_EDBGREQ
+ PE_DBGRESTART
+ PE_CTIIRQ>;
+
+ arm,trig-filters = <0>;
+ };
+ };
+ # Implementation defined CTI - non CoreSight component connections.
+ - |
+ cti@20110000 {
+ compatible = "arm,coresight-cti", "arm,primecell";
+ reg = <0 0x20110000 0 0x1000>;
+
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ trig-conns@0 {
+ reg = <0>;
+ arm,trig-in-sigs=<0>;
+ arm,trig-in-types=<GEN_INTREQ>;
+ arm,trig-out-sigs=<0>;
+ arm,trig-out-types=<GEN_HALTREQ>;
+ arm,trig-conn-name = "sys_profiler";
+ };
+
+ trig-conns@1 {
+ reg = <1>;
+ arm,trig-out-sigs=<2 3>;
+ arm,trig-out-types=<GEN_HALTREQ GEN_RESTARTREQ>;
+ arm,trig-conn-name = "watchdog";
+ };
+
+ trig-conns@2 {
+ reg = <2>;
+ arm,trig-in-sigs=<1 6>;
+ arm,trig-in-types=<GEN_HALTREQ GEN_RESTARTREQ>;
+ arm,trig-conn-name = "g_counter";
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt
index d02c42d21f2f..846f6daae71b 100644
--- a/Documentation/devicetree/bindings/arm/coresight.txt
+++ b/Documentation/devicetree/bindings/arm/coresight.txt
@@ -45,6 +45,10 @@ its hardware characteristcs.
- Coresight Address Translation Unit (CATU)
"arm,coresight-catu", "arm,primecell";
+ - Coresight Cross Trigger Interface (CTI):
+ "arm,coresight-cti", "arm,primecell";
+ See coresight-cti.yaml for full CTI definitions.
+
* reg: physical base address and length of the register
set(s) of the component.
@@ -72,6 +76,9 @@ its hardware characteristcs.
* reg-names: the only acceptable values are "stm-base" and
"stm-stimulus-base", each corresponding to the areas defined in "reg".
+* Required properties for Coresight Cross Trigger Interface (CTI)
+ See coresight-cti.yaml for full CTI definitions.
+
* Required properties for devices that don't show up on the AMBA bus, such as
non-configurable replicators and non-configurable funnels:
diff --git a/MAINTAINERS b/MAINTAINERS
index bd5847e802de..77f5d28fa84b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1645,9 +1645,11 @@ R: Suzuki K Poulose <suzuki.poulose(a)arm.com>
L: linux-arm-kernel(a)lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: drivers/hwtracing/coresight/*
+F: include/dt-bindings/arm/coresight-cti-dt.h
F: Documentation/trace/coresight/*
F: Documentation/devicetree/bindings/arm/coresight.txt
F: Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt
+F: Documentation/devicetree/bindings/arm/coresight-cti.yaml
F: Documentation/ABI/testing/sysfs-bus-coresight-devices-*
F: tools/perf/arch/arm/util/pmu.c
F: tools/perf/arch/arm/util/auxtrace.c
diff --git a/include/dt-bindings/arm/coresight-cti-dt.h b/include/dt-bindings/arm/coresight-cti-dt.h
new file mode 100644
index 000000000000..61e7bdf8ea6e
--- /dev/null
+++ b/include/dt-bindings/arm/coresight-cti-dt.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This header provides constants for the defined trigger signal
+ * types on CoreSight CTI.
+ */
+
+#ifndef _DT_BINDINGS_ARM_CORESIGHT_CTI_DT_H
+#define _DT_BINDINGS_ARM_CORESIGHT_CTI_DT_H
+
+#define GEN_IO 0
+#define GEN_INTREQ 1
+#define GEN_INTACK 2
+#define GEN_HALTREQ 3
+#define GEN_RESTARTREQ 4
+#define PE_EDBGREQ 5
+#define PE_DBGRESTART 6
+#define PE_CTIIRQ 7
+#define PE_PMUIRQ 8
+#define PE_DBGTRIGGER 9
+#define ETM_EXTOUT 10
+#define ETM_EXTIN 11
+#define SNK_FULL 12
+#define SNK_ACQCOMP 13
+#define SNK_FLUSHCOMP 14
+#define SNK_FLUSHIN 15
+#define SNK_TRIGIN 16
+#define STM_ASYNCOUT 17
+#define STM_TOUT_SPTE 18
+#define STM_TOUT_SW 19
+#define STM_TOUT_HETE 20
+#define STM_HWEVENT 21
+#define ELA_TSTART 22
+#define ELA_TSTOP 23
+#define ELA_DBGREQ 24
+#define CTI_TRIG_MAX 25
+
+#endif /*_DT_BINDINGS_ARM_CORESIGHT_CTI_DT_H */
--
2.17.1
