CoreSight January 2024

coresight@lists.linaro.org

9 participants
31 discussions

[PATCH V4 00/11] coresight: Move remaining AMBA ACPI devices into platform driver

by Anshuman Khandual

This moves remaining AMBA ACPI devices into respective platform drivers for enabling ACPI based power management support. This series applies on kernel v6.8-rc1 release. This series has been built, and boot tested on a DT based coresight platform. Although this still requires some more testing on ACPI based coresight platforms. https://git.gitlab.arm.com/linux-arm/linux-anshuman.git (amba_other_acpi_migration_v4) Cc: Lorenzo Pieralisi <lpieralisi(a)kernel.org> Cc: Sudeep Holla <sudeep.holla(a)arm.com> Cc: Suzuki K Poulose <suzuki.poulose(a)arm.com> Cc: Mike Leach <mike.leach(a)linaro.org> Cc: James Clark <james.clark(a)arm.com> Cc: Maxime Coquelin <mcoquelin.stm32(a)gmail.com> Cc: Alexandre Torgue <alexandre.torgue(a)foss.st.com> Cc: linux-acpi(a)vger.kernel.org Cc: linux-arm-kernel(a)lists.infradead.org Cc: linux-kernel(a)vger.kernel.org Cc: coresight(a)lists.linaro.org Cc: linux-stm32(a)st-md-mailman.stormreply.com Changes in V4: - Fixed PM imbalance in etm4_probe() error path with pm_runtime_disable() - Restored back the pm_runtime_disable() on platform probe error paths in replicator, funnel, catu, tpiu, tmc and stm devices - Dropped dev_caps argument from __tmc_probe() - Changed xxxx_platform_remove() for platform_driver->remove_new() callback Changes in V3: https://lore.kernel.org/all/20231208053939.42901-1-anshuman.khandual@arm.co… - Split coresight_init_driver/remove_driver() helpers into a separate patch - Added 'drvdata->pclk' comments in replicator, funnel, tpiu, tmc, and stm devices - Updated funnel, and replicator drivers to use these new helpers - Check for drvdata instead of drvdata->pclk in suspend and resume paths in catu, tmc and debug devices - Added patch to extract device name from AMBA pid based table lookup for stm - Added patch to extract device properties from AMBA pid based table look for tmc - Dropped pm_runtime_put() from common __probe() functions - Handled pm_runtime_put() in AMBA driver in success path - Handled pm_runtime_put() in platform driver in both success and error paths Changes in V2: https://lore.kernel.org/all/20231201062053.1268492-1-anshuman.khandual@arm.… - Dropped redundant devm_ioremap_resource() hunk from tmc_platform_probe() - Defined coresight_[init|remove]_driver() for both AMBA/platform drivers - Changed catu, tmc, tpiu, stm and debug coresight drivers to use the new helpers avoiding build issues arising from module_amba_driver(), and module_platform_driver() being on the same file Changes in V1: https://lore.kernel.org/all/20231027072943.3418997-1-anshuman.khandual@arm.… - Replaced all IS_ERR() instances with IS_ERR_OR_NULL() as per Suzuki Changes in RFC: https://lore.kernel.org/all/20230921042040.1334641-1-anshuman.khandual@arm.… Anshuman Khandual (11): coresight: etm4x: Fix unbalanced pm_runtime_enable() coresight: stm: Extract device name from AMBA pid based table lookup coresight: tmc: Extract device properties from AMBA pid based table lookup coresight: Add helpers registering/removing both AMBA and platform drivers coresight: replicator: Move ACPI support from AMBA driver to platform driver coresight: funnel: Move ACPI support from AMBA driver to platform driver coresight: catu: Move ACPI support from AMBA driver to platform driver coresight: tpiu: Move ACPI support from AMBA driver to platform driver coresight: tmc: Move ACPI support from AMBA driver to platform driver coresight: stm: Move ACPI support from AMBA driver to platform driver coresight: debug: Move ACPI support from AMBA driver to platform driver drivers/acpi/arm64/amba.c | 8 - drivers/hwtracing/coresight/coresight-catu.c | 142 +++++++++++++--- drivers/hwtracing/coresight/coresight-catu.h | 1 + drivers/hwtracing/coresight/coresight-core.c | 29 ++++ .../hwtracing/coresight/coresight-cpu-debug.c | 141 ++++++++++++++-- .../coresight/coresight-etm4x-core.c | 3 + .../hwtracing/coresight/coresight-funnel.c | 86 +++++----- drivers/hwtracing/coresight/coresight-priv.h | 10 ++ .../coresight/coresight-replicator.c | 81 ++++----- drivers/hwtracing/coresight/coresight-stm.c | 117 +++++++++++-- .../hwtracing/coresight/coresight-tmc-core.c | 158 +++++++++++++++--- drivers/hwtracing/coresight/coresight-tmc.h | 2 + drivers/hwtracing/coresight/coresight-tpiu.c | 102 +++++++++-- include/linux/coresight.h | 7 + 14 files changed, 726 insertions(+), 161 deletions(-) -- 2.25.1

2 months

[PATCH v2 00/12] coresight: Separate sysfs and Perf usage and some other cleanups

by James Clark

Changes since V1: * Clarify further "the selected sink" in _coresight_build_path() * Move etm4x's mode to coresight device which was missing from V1 * Use explicit initialisers in coresight_dev_type * Create functions for handling mode changes I've been finding it quite difficult to reason about some of the state and functions in coresight-core.c because they have generic names when they are actually only relevant to the sysfs usage of Coresight rather than usage through Perf. This is probably because sysfs came first and Perf was added later. This has caused a couple of issues where these things have been used in the wrong context, for example the first commit is a fixup. To fix this I've mainly just moved all of the sysfs stuff to the sysfs file and removed the 'enable' state, which was just for sysfs. While doing the refactor it became obvious that refcnt didn't need to be atomic either, so that can be simplified along with some other comment clarifications and simplifications. Hopefully it's also a step towards to removing all of the duplicate refcnt and mode tracking code from the individual devices. That tracking pretty much always results in a one-shot enable/disable and fixes the mode to either sysfs or Perf, and there is no reason that can't exist in the core layer outside of the devices. I tried to finish that in this set, but there turned out to be some complexities, so I cut it short at a point where I can be sure that there are no behavioral changes. James Clark (12): coresight: Fix issue where a source device's helpers aren't disabled coresight: Make language around "activated" sinks consistent coresight: Remove ops callback checks coresight: Move mode to struct coresight_device coresight: Remove the 'enable' field. coresight: Move all sysfs code to sysfs file coresight: Remove atomic type from refcnt coresight: Remove unused stubs coresight: Add explicit member initializers to coresight_dev_type coresight: Add helper for atomically taking the device coresight: Add a helper for getting csdev->mode coresight: Add helper for setting csdev->mode drivers/hwtracing/coresight/coresight-core.c | 494 +----------------- drivers/hwtracing/coresight/coresight-etb10.c | 29 +- .../hwtracing/coresight/coresight-etm-perf.c | 2 +- drivers/hwtracing/coresight/coresight-etm.h | 2 - .../coresight/coresight-etm3x-core.c | 23 +- .../coresight/coresight-etm3x-sysfs.c | 4 +- .../coresight/coresight-etm4x-core.c | 26 +- drivers/hwtracing/coresight/coresight-etm4x.h | 1 - drivers/hwtracing/coresight/coresight-priv.h | 9 +- drivers/hwtracing/coresight/coresight-stm.c | 30 +- drivers/hwtracing/coresight/coresight-sysfs.c | 391 ++++++++++++++ .../hwtracing/coresight/coresight-tmc-core.c | 2 +- .../hwtracing/coresight/coresight-tmc-etf.c | 46 +- .../hwtracing/coresight/coresight-tmc-etr.c | 33 +- drivers/hwtracing/coresight/coresight-tmc.h | 2 - drivers/hwtracing/coresight/coresight-tpda.c | 13 +- drivers/hwtracing/coresight/coresight-tpiu.c | 14 +- drivers/hwtracing/coresight/ultrasoc-smb.c | 22 +- drivers/hwtracing/coresight/ultrasoc-smb.h | 2 - include/linux/coresight.h | 146 ++---- 20 files changed, 606 insertions(+), 685 deletions(-) -- 2.34.1

2 months, 2 weeks

[PATCH v3 0/4] coresight: Make current W=1 warnings default

by James Clark

Changes since v2: * Split code and Makefile changes * Add a fix for a comment warning in etm3x * Add some sparse checker fixes in coresight-cfg-afdo.c * Fix the 0 instead of NULL warnings reported by kernel test robot James Clark (4): coresight: Fix uninitialized struct warnings coresight: etm3x: Fix build warning coresight: Fix undeclared variable warnings from sparse checker coresight: Make current W=1 warnings default drivers/hwtracing/coresight/Makefile | 20 +++++++++++++++++++ .../hwtracing/coresight/coresight-cfg-afdo.c | 1 + .../hwtracing/coresight/coresight-cti-core.c | 2 +- drivers/hwtracing/coresight/coresight-etb10.c | 2 +- .../coresight/coresight-etm3x-core.c | 4 ++-- .../coresight/coresight-etm4x-core.c | 2 +- .../hwtracing/coresight/coresight-funnel.c | 4 ++-- .../coresight/coresight-replicator.c | 2 +- drivers/hwtracing/coresight/coresight-stm.c | 2 +- .../hwtracing/coresight/coresight-tmc-core.c | 2 +- drivers/hwtracing/coresight/coresight-tpda.c | 2 +- drivers/hwtracing/coresight/coresight-tpdm.c | 2 +- drivers/hwtracing/coresight/coresight-tpiu.c | 2 +- drivers/hwtracing/coresight/ultrasoc-smb.c | 2 +- 14 files changed, 35 insertions(+), 14 deletions(-) -- 2.34.1

2 months, 2 weeks

[PATCH] coresight: etm4x: Set skip_power_up in etm4_init_arch_data function

by Mao Jinlong

skip_power_up is used in etm4_init_arch_data when set lpoverride. So need to set the value of it before calling using it. Signed-off-by: Mao Jinlong <quic_jinlmao(a)quicinc.com> --- drivers/hwtracing/coresight/coresight-etm4x-core.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c index c5ea808ea662..8afc07d1dd23 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x-core.c +++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c @@ -1200,6 +1200,7 @@ static void etm4_init_arch_data(void *info) struct etm4_init_arg *init_arg = info; struct etmv4_drvdata *drvdata; struct csdev_access *csa; + struct device *dev = init_arg->dev; int i; drvdata = dev_get_drvdata(init_arg->dev); @@ -1213,6 +1214,10 @@ static void etm4_init_arch_data(void *info) if (!etm4_init_csdev_access(drvdata, csa)) return; + if (!csa->io_mem || + fwnode_property_present(dev_fwnode(dev), "qcom,skip-power-up")) + drvdata->skip_power_up = true; + /* Detect the support for OS Lock before we actually use it */ etm_detect_os_lock(drvdata, csa); @@ -2040,11 +2045,6 @@ static int etm4_add_coresight_dev(struct etm4_init_arg *init_arg) if (!drvdata->arch) return -EINVAL; - /* TRCPDCR is not accessible with system instructions. */ - if (!desc.access.io_mem || - fwnode_property_present(dev_fwnode(dev), "qcom,skip-power-up")) - drvdata->skip_power_up = true; - major = ETM_ARCH_MAJOR_VERSION(drvdata->arch); minor = ETM_ARCH_MINOR_VERSION(drvdata->arch); -- 2.41.0

2 months, 2 weeks

[PATCH v4 2/7] arm64: KVM: Use shared area to pass PMU event state to hypervisor

by James Clark

Currently the state of the PMU events is copied into the VCPU struct before every VCPU run. This isn't scalable if more data for other features needs to be added too. So make a writable area that's shared between the host and the hypervisor to store this state. Normal per-cpu constructs can't be used because although the framework exists for the host to write to the hypervisor's per-cpu structs, this only works until the protection is enabled. And for the other way around, no framework exists for the hypervisor to access the host's size and layout of per-cpu data. Instead of making a new framework for the hypervisor to access the host's per-cpu data that would only be used once, just define the new shared area as an array with NR_CPUS elements. This also reduces the amount of sharing that needs to be done, because unlike this array, the per-cpu data isn't contiguous. Signed-off-by: James Clark <james.clark(a)arm.com> --- arch/arm64/include/asm/kvm_host.h | 8 ++++++++ arch/arm64/kernel/image-vars.h | 1 + arch/arm64/kvm/arm.c | 16 ++++++++++++++-- arch/arm64/kvm/hyp/nvhe/setup.c | 11 +++++++++++ arch/arm64/kvm/hyp/nvhe/switch.c | 9 +++++++-- arch/arm64/kvm/pmu.c | 4 +--- include/kvm/arm_pmu.h | 17 ----------------- 7 files changed, 42 insertions(+), 24 deletions(-) diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h index 824f29f04916..93d38ad257ed 100644 --- a/arch/arm64/include/asm/kvm_host.h +++ b/arch/arm64/include/asm/kvm_host.h @@ -466,6 +466,14 @@ struct kvm_cpu_context { struct kvm_vcpu *__hyp_running_vcpu; }; +struct kvm_host_global_state { + struct kvm_pmu_events { + u32 events_host; + u32 events_guest; + } pmu_events; +} ____cacheline_aligned; +extern struct kvm_host_global_state kvm_host_global_state[NR_CPUS]; + struct kvm_host_data { struct kvm_cpu_context host_ctxt; }; diff --git a/arch/arm64/kernel/image-vars.h b/arch/arm64/kernel/image-vars.h index 119ca121b5f8..1a9dbb02bb4a 100644 --- a/arch/arm64/kernel/image-vars.h +++ b/arch/arm64/kernel/image-vars.h @@ -59,6 +59,7 @@ KVM_NVHE_ALIAS(alt_cb_patch_nops); /* Global kernel state accessed by nVHE hyp code. */ KVM_NVHE_ALIAS(kvm_vgic_global_state); +KVM_NVHE_ALIAS(kvm_host_global_state); /* Kernel symbols used to call panic() from nVHE hyp code (via ERET). */ KVM_NVHE_ALIAS(nvhe_hyp_panic_handler); diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c index 4796104c4471..bd6b2eda5f4f 100644 --- a/arch/arm64/kvm/arm.c +++ b/arch/arm64/kvm/arm.c @@ -47,6 +47,20 @@ static enum kvm_mode kvm_mode = KVM_MODE_DEFAULT; +/* + * Host state that isn't associated with any VCPU, but will affect any VCPU + * running on a host CPU in the future. This remains writable from the host and + * readable in the hyp. + * + * PER_CPU constructs aren't compatible between the hypervisor and the host so + * just define it as a NR_CPUS array. DECLARE_KVM_NVHE_PER_CPU works in both + * places, but not after the hypervisor protection is initialised. After that, + * kvm_arm_hyp_percpu_base isn't accessible from the host, so even if the + * kvm_host_global_state struct was shared with the host, the per-cpu offset + * can't be calculated without sharing even more data with the host. + */ +struct kvm_host_global_state kvm_host_global_state[NR_CPUS]; + DECLARE_KVM_HYP_PER_CPU(unsigned long, kvm_hyp_vector); DEFINE_PER_CPU(unsigned long, kvm_arm_hyp_stack_page); @@ -1016,8 +1030,6 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu) kvm_vgic_flush_hwstate(vcpu); - kvm_pmu_update_vcpu_events(vcpu); - /* * Ensure we set mode to IN_GUEST_MODE after we disable * interrupts and before the final VCPU requests check. diff --git a/arch/arm64/kvm/hyp/nvhe/setup.c b/arch/arm64/kvm/hyp/nvhe/setup.c index b5452e58c49a..3e45cc10ba96 100644 --- a/arch/arm64/kvm/hyp/nvhe/setup.c +++ b/arch/arm64/kvm/hyp/nvhe/setup.c @@ -159,6 +159,17 @@ static int recreate_hyp_mappings(phys_addr_t phys, unsigned long size, if (ret) return ret; + /* + * Similar to kvm_vgic_global_state, but this one remains writable by + * the host rather than read-only. Used to store per-cpu state about the + * host that isn't associated with any particular VCPU. + */ + prot = pkvm_mkstate(KVM_PGTABLE_PROT_RW, PKVM_PAGE_SHARED_OWNED); + ret = pkvm_create_mappings(&kvm_host_global_state, + &kvm_host_global_state + 1, prot); + if (ret) + return ret; + ret = create_hyp_debug_uart_mapping(); if (ret) return ret; diff --git a/arch/arm64/kvm/hyp/nvhe/switch.c b/arch/arm64/kvm/hyp/nvhe/switch.c index c50f8459e4fc..89147a9dc38c 100644 --- a/arch/arm64/kvm/hyp/nvhe/switch.c +++ b/arch/arm64/kvm/hyp/nvhe/switch.c @@ -130,13 +130,18 @@ static void __hyp_vgic_restore_state(struct kvm_vcpu *vcpu) } } +static struct kvm_pmu_events *kvm_nvhe_get_pmu_events(struct kvm_vcpu *vcpu) +{ + return &kvm_host_global_state[vcpu->cpu].pmu_events; +} + /* * Disable host events, enable guest events */ #ifdef CONFIG_HW_PERF_EVENTS static bool __pmu_switch_to_guest(struct kvm_vcpu *vcpu) { - struct kvm_pmu_events *pmu = &vcpu->arch.pmu.events; + struct kvm_pmu_events *pmu = kvm_nvhe_get_pmu_events(vcpu); if (pmu->events_host) write_sysreg(pmu->events_host, pmcntenclr_el0); @@ -152,7 +157,7 @@ static bool __pmu_switch_to_guest(struct kvm_vcpu *vcpu) */ static void __pmu_switch_to_host(struct kvm_vcpu *vcpu) { - struct kvm_pmu_events *pmu = &vcpu->arch.pmu.events; + struct kvm_pmu_events *pmu = kvm_nvhe_get_pmu_events(vcpu); if (pmu->events_guest) write_sysreg(pmu->events_guest, pmcntenclr_el0); diff --git a/arch/arm64/kvm/pmu.c b/arch/arm64/kvm/pmu.c index a243934c5568..136d5c6c1916 100644 --- a/arch/arm64/kvm/pmu.c +++ b/arch/arm64/kvm/pmu.c @@ -6,8 +6,6 @@ #include <linux/kvm_host.h> #include <linux/perf_event.h> -static DEFINE_PER_CPU(struct kvm_pmu_events, kvm_pmu_events); - /* * Given the perf event attributes and system type, determine * if we are going to need to switch counters at guest entry/exit. @@ -28,7 +26,7 @@ static bool kvm_pmu_switch_needed(struct perf_event_attr *attr) struct kvm_pmu_events *kvm_get_pmu_events(void) { - return this_cpu_ptr(&kvm_pmu_events); + return &kvm_host_global_state[smp_processor_id()].pmu_events; } /* diff --git a/include/kvm/arm_pmu.h b/include/kvm/arm_pmu.h index 4b9d8fb393a8..71a835970ab5 100644 --- a/include/kvm/arm_pmu.h +++ b/include/kvm/arm_pmu.h @@ -18,14 +18,8 @@ struct kvm_pmc { struct perf_event *perf_event; }; -struct kvm_pmu_events { - u32 events_host; - u32 events_guest; -}; - struct kvm_pmu { struct irq_work overflow_work; - struct kvm_pmu_events events; struct kvm_pmc pmc[ARMV8_PMU_MAX_COUNTERS]; int irq_num; bool created; @@ -79,17 +73,6 @@ void kvm_vcpu_pmu_resync_el0(void); #define kvm_vcpu_has_pmu(vcpu) \ (vcpu_has_feature(vcpu, KVM_ARM_VCPU_PMU_V3)) -/* - * Updates the vcpu's view of the pmu events for this cpu. - * Must be called before every vcpu run after disabling interrupts, to ensure - * that an interrupt cannot fire and update the structure. - */ -#define kvm_pmu_update_vcpu_events(vcpu) \ - do { \ - if (!has_vhe() && kvm_vcpu_has_pmu(vcpu)) \ - vcpu->arch.pmu.events = *kvm_get_pmu_events(); \ - } while (0) - /* * Evaluates as true when emulating PMUv3p5, and false otherwise. */ -- 2.34.1

2 months, 3 weeks

[PATCH v5 00/10] Add support to configure TPDM CMB subunit

by Tao Zhang

Introduction of TPDM CMB(Continuous Multi Bit) subunit CMB subunit is responsible for creating a dataset element, and is also optionally responsible for packing it to fit multiple elements on a single ATB transfer if possible in the configuration. The TPDM Core Datapath requests timestamps be stored by the TPDA and then delivering ATB sized data (depending on ATB width and element size, this could be smaller or larger than a dataset element) to the ATB Mast FSM. The CMB makes trace elements in two modes. In �continuous� mode, every valid data cycle creates an element. In �trace on change� mode, when valid data changes on the bus, a trace element is created. In continuous mode, all cycles where this condition is true create trace elements. In trace on change mode, a data element is only when the previously sampled input is different from the current sampled input. The CMB subunit must be configured prior to enablement. This series adds support for TPDM to configure the configure CMB subunit. Once this series patches are applied properly, the new tpdm nodes for should be observed at the tpdm path /sys/bus/coresight/devices/tpdm* which supports CMB subunit. e.g. root@qemuarm64:/sys/devices/platform/soc@0/684c000.tpdm/tpdm0# ls -l -rw-r--r-- 1 root root 4096 Jan 1 00:00 cmb_mode drwxr-xr-x 2 root root 0 Jan 1 00:00 cmb_msr drwxr-xr-x 2 root root 0 Jan 1 00:00 cmb_patt drwxr-xr-x 2 root root 0 Jan 1 00:00 cmb_trig_patt -rw-r--r-- 1 root root 4096 Jan 1 00:00 cmb_trig_ts -rw-r--r-- 1 root root 4096 Jan 1 00:00 cmb_ts_all drwxr-xr-x 2 root root 0 Jan 1 00:00 connections drwxr-xr-x 2 root root 0 Jan 1 00:00 dsb_edge drwxr-xr-x 2 root root 0 Jan 1 00:00 dsb_msr drwxr-xr-x 2 root root 0 Jan 1 00:00 dsb_patt drwxr-xr-x 2 root root 0 Jan 1 00:00 dsb_trig_patt -rw-r--r-- 1 root root 4096 Jan 1 00:00 enable_source --w------- 1 root root 4096 Jan 1 00:00 integration_test drwxr-xr-x 2 root root 0 Ja? 1 00:00 power --w------- 1 root root 4096 Jan 1 00:00 reset_dataset lrwxrwxrwx 1 root root 0 Apr 5 2021 subsystem -> ../../../../../bus/coresight -rw-r--r-- 1 root root 4096 Apr 5 2021 uevent -r--r--r-- 1 root root 4096 Jan 1 00:00 waiting_for_supplier We can use the commands are similar to the below to configure the TPDMs which support CMB subunit. Enable coresight sink first. echo 1 > /sys/bus/coresight/devices/tmc_etf0/enable_sink echo 1 > /sys/bus/coresight/devices/tpdm0/reset_dataset echo 1 > /sys/bus/coresight/devices/tpdm0/cmb_mode echo 1 > /sys/bus/coresight/devices/tpdm0/cmb_patt/enable_ts echo 0xFFFFFFFF > /sys/bus/coresight/devices/tpdm0/cmb_patt/tpmr0 echo 0 > /sys/bus/coresight/devices/tpdm0/cmb_trig_ts echo 0xFFFFFFFF > /sys/bus/coresight/devices/tpdm0/cmb_trig_patt/xpr1 echo 1 > /sys/bus/coresight/devices/tpdm0/enable_source codelinaro link: https://git.codelinaro.org/clo/linux-kernel/coresight/-/commits/tpdm-cmb-v5 Changes in V5: 1. Return directly to refine the process of "tpdm_enable_dsb" and "tpdm_disable_dsb" if the TPDM does not support DSB dataset. -- Suzuki K Poulose 2. Change the new property name from "qcom,cmb-element-size" to "qcom,cmb-element-bits". And update the property name to the new tpdm example which supports the CMB dataset. -- Krzysztof 3. Drop unnecessary () around the drvdata member access in patch#5. -- Suzuki K Poulose 4. Replace the error code "-EEXIST" with the port number in detecting multiple TPDMs on one input port. In patch#5. -- Suzuki K Poulose 5. Due to the modification of the new property name, the searched property name was changed from "qcom,cmb-element-size" to "qcom,cmb-element-bits". In patch#5. 6. Replace the judgement "tpdm_has_cmb_dataset(drvdata)" with "drvdata->cmb" in the function "tpdm_reset_datasets". In patch#6. -- Suzuki K Poulose 7. Drop unnecessary () around kstrtoul() in the function "cmb_mode_store". In patch#6. -- Suzuki K Poulose 8. Update the date and the kernel version in the Document. -- Suzuki K Poulose 9. Initialize the return value to "-EINVAL" and remove the unnecessary code in the function "enable_ts_show". In patch#8. -- Suzuki K Poulose 10. Replace spin lock/unlock with guard(spinlock). In patch#8. -- Suzuki K Poulose 11. Drop _rw from the macro "tpdm_patt_enable_ts_rw". In patch#8. -- Suzuki K Poulose Changes in V4: 1. Replace spin lock/unlock to avoid forgetting to unlock when the function exits. -- Suzuki K Poulose 2. Move the helper "tpdm_has_dsb_dataset" to the header file. -- Suzuki K Poulose 3. Fix the incorrect property of the sample in the documents. -- James Clark 4. Clear the dsb/cmb element size directly in the clear helper. -- Suzuki K Poulose 5. Correct the comment of "tpdm_read_element_size". -- Suzuki K Poulose 6. Call the helper "tpdm_has_dsb/cmb_dataset" in TPDA driver to check what dataset the TPDM supports. -- Suzuki K Poulose 7. Refine the dsb/cmb dataset support check in enable/disable functions. -- Suzuki K Poulose 8. Get rid of redundant code in function "set_cmb_tier". -- Suzuki K Poulose 9. Since one SysFs file should follow "one value", use "dev_ext_attribute" to instead of the previous "enable_ts" Sysfs file approach. -- Suzuki K Poulose 10. Change the kernel version to 6.9 for the MSR related SysFs file. -- James Clark 11. Refine the function "tpdm_simple_dataset_store". -- Suzuki K Poulose Changes in V3: 1. Add 8-bit support to the description in the TPDM devicetree document. -- Rob Herring 2. Change how the result is produced in "tpdm_read_element_size". -- James Clark 3. Calling "tpdm_clear_element_size" at the beginning of "tpda_enable_port". -- James Clark 4. Use "dsb_esize" and "cmb_esize" to determine whether multiple TPDMs are detected on a TPDA input port in "tpda_get_element_size". -- James Clark 5. Modify the judgment logic in "tpda_enable_port". -- James Clark 6. Add more description of "cmb_mode" to TPDM SysFS document. -- James Clark Changes in V2: 1. Optimizate and modify this patch series based on the patch series "Add support to configure TPDM CMB subunit". 2. Modify the functions that read the element size of DSB/CMB in TPDA driver. Tao Zhang (10): coresight-tpdm: Optimize the store function of tpdm simple dataset coresight-tpdm: Optimize the useage of tpdm_has_dsb_dataset dt-bindings: arm: qcom,coresight-tpdm: Add support for CMB element size coresight-tpdm: Add CMB dataset support coresight-tpda: Add support to configure CMB element coresight-tpdm: Add support to configure CMB coresight-tpdm: Add pattern registers support for CMB coresight-tpdm: Add timestamp control register support for the CMB dt-bindings: arm: qcom,coresight-tpdm: Add support for TPDM CMB MSR register coresight-tpdm: Add msr register support for CMB .../testing/sysfs-bus-coresight-devices-tpdm | 87 ++++ .../bindings/arm/qcom,coresight-tpdm.yaml | 35 ++ drivers/hwtracing/coresight/coresight-tpda.c | 123 +++-- drivers/hwtracing/coresight/coresight-tpda.h | 6 + drivers/hwtracing/coresight/coresight-tpdm.c | 455 ++++++++++++++++-- drivers/hwtracing/coresight/coresight-tpdm.h | 113 +++++ 6 files changed, 727 insertions(+), 92 deletions(-) -- 2.17.1

2 months, 3 weeks

[PATCH v3 0/2] coresight: core: Add device name support

by Mao Jinlong

With current design, the name of the non-cpu bounded coresight component is the device type with the number. And with 'ls' command we can get the register address of the component. But from these information, we can't know what the HW or system the component belongs to. Add device-name in DT to support it. cti_sys0 -> ../../../devices/platform/soc(a)0/138f0000.cti/cti_sys0 cti_sys1 -> ../../../devices/platform/soc(a)0/13900000.cti/cti_sys1 tpdm0 -> ../../../devices/platform/soc(a)0/10b0d000.tpdm/tpdm0 tpdm1 -> ../../../devices/platform/soc(a)0/10c28000.tpdm/tpdm1 tpdm2 -> ../../../devices/platform/soc(a)0/10c29000.tpdm/tpdm2 Change since V2: 1. Fix the error in coresight core. drivers/hwtracing/coresight/coresight-core.c:1775:7: error: assigning to 'char *' from 'const char *' discards qualifiers 2. Fix the warning when run dtbinding check. Documentation/devicetree/bindings/arm/arm,coresight-cpu-debug.yaml: device-name: missing type definition Change since V1: 1. Change coresight-name to device name. 2. Add the device-name in coresight dt bindings. Mao Jinlong (2): coresight: core: Add device name support dt-bindings: arm: Add device-name in the coresight components .../bindings/arm/arm,coresight-catu.yaml | 6 +++ .../bindings/arm/arm,coresight-cpu-debug.yaml | 6 +++ .../bindings/arm/arm,coresight-cti.yaml | 6 +++ .../arm/arm,coresight-dummy-sink.yaml | 6 +++ .../arm/arm,coresight-dummy-source.yaml | 6 +++ .../arm/arm,coresight-dynamic-funnel.yaml | 6 +++ .../arm/arm,coresight-dynamic-replicator.yaml | 6 +++ .../bindings/arm/arm,coresight-etb10.yaml | 6 +++ .../bindings/arm/arm,coresight-etm.yaml | 6 +++ .../arm/arm,coresight-static-funnel.yaml | 6 +++ .../arm/arm,coresight-static-replicator.yaml | 6 +++ .../bindings/arm/arm,coresight-stm.yaml | 6 +++ .../bindings/arm/arm,coresight-tmc.yaml | 6 +++ .../bindings/arm/arm,coresight-tpiu.yaml | 6 +++ .../bindings/arm/qcom,coresight-tpda.yaml | 6 +++ .../bindings/arm/qcom,coresight-tpdm.yaml | 6 +++ drivers/hwtracing/coresight/coresight-core.c | 37 ++++++++++--------- .../hwtracing/coresight/coresight-platform.c | 31 ++++++++++++++++ include/linux/coresight.h | 3 +- 19 files changed, 149 insertions(+), 18 deletions(-) -- 2.41.0

2 months, 3 weeks

[PATCH v4 00/10] Add support to configure TPDM CMB subunit

by Tao Zhang

Introduction of TPDM CMB(Continuous Multi Bit) subunit CMB subunit is responsible for creating a dataset element, and is also optionally responsible for packing it to fit multiple elements on a single ATB transfer if possible in the configuration. The TPDM Core Datapath requests timestamps be stored by the TPDA and then delivering ATB sized data (depending on ATB width and element size, this could be smaller or larger than a dataset element) to the ATB Mast FSM. The CMB makes trace elements in two modes. In �continuous� mode, every valid data cycle creates an element. In �trace on change� mode, when valid data changes on the bus, a trace element is created. In continuous mode, all cycles where this condition is true create trace elements. In trace on change mode, a data element is only when the previously sampled input is different from the current sampled input. The CMB subunit must be configured prior to enablement. This series adds support for TPDM to configure the configure CMB subunit. Once this series patches are applied properly, the new tpdm nodes for should be observed at the tpdm path /sys/bus/coresight/devices/tpdm* which supports CMB subunit. e.g. root@qemuarm64:/sys/devices/platform/soc@0/684c000.tpdm/tpdm0# ls -l -rw-r--r-- 1 root root 4096 Jan 1 00:00 cmb_mode drwxr-xr-x 2 root root 0 Jan 1 00:00 cmb_msr drwxr-xr-x 2 root root 0 Jan 1 00:00 cmb_patt drwxr-xr-x 2 root root 0 Jan 1 00:00 cmb_trig_patt -rw-r--r-- 1 root root 4096 Jan 1 00:00 cmb_trig_ts -rw-r--r-- 1 root root 4096 Jan 1 00:00 cmb_ts_all drwxr-xr-x 2 root root 0 Jan 1 00:00 connections drwxr-xr-x 2 root root 0 Jan 1 00:00 dsb_edge drwxr-xr-x 2 root root 0 Jan 1 00:00 dsb_msr drwxr-xr-x 2 root root 0 Jan 1 00:00 dsb_patt drwxr-xr-x 2 root root 0 Jan 1 00:00 dsb_trig_patt -rw-r--r-- 1 root root 4096 Jan 1 00:00 enable_source --w------- 1 root root 4096 Jan 1 00:00 integration_test drwxr-xr-x 2 root root 0 Ja? 1 00:00 power --w------- 1 root root 4096 Jan 1 00:00 reset_dataset lrwxrwxrwx 1 root root 0 Apr 5 2021 subsystem -> ../../../../../bus/coresight -rw-r--r-- 1 root root 4096 Apr 5 2021 uevent -r--r--r-- 1 root root 4096 Jan 1 00:00 waiting_for_supplier We can use the commands are similar to the below to configure the TPDMs which support CMB subunit. Enable coresight sink first. echo 1 > /sys/bus/coresight/devices/tmc_etf0/enable_sink echo 1 > /sys/bus/coresight/devices/tpdm0/reset_dataset echo 1 > /sys/bus/coresight/devices/tpdm0/cmb_mode echo 1 > /sys/bus/coresight/devices/tpdm0/cmb_patt/enable_ts echo 0xFFFFFFFF > /sys/bus/coresight/devices/tpdm0/cmb_patt/tpmr0 echo 0 > /sys/bus/coresight/devices/tpdm0/cmb_trig_ts echo 0xFFFFFFFF > /sys/bus/coresight/devices/tpdm0/cmb_trig_patt/xpr1 echo 1 > /sys/bus/coresight/devices/tpdm0/enable_source codelinaro link: https://git.codelinaro.org/clo/linux-kernel/coresight/-/commits/tpdm-cmb-v4 Changes in V4: 1. Replace spin lock/unlock to avoid forgetting to unlock when the function exits. -- Suzuki K Poulose 2. Move the helper "tpdm_has_dsb_dataset" to the header file. -- Suzuki K Poulose 3. Fix the incorrect property of the sample in the documents. -- James Clark 4. Clear the dsb/cmb element size directly in the clear helper. -- Suzuki K Poulose 5. Correct the comment of "tpdm_read_element_size". -- Suzuki K Poulose 6. Call the helper "tpdm_has_dsb/cmb_dataset" in TPDA driver to check what dataset the TPDM supports. -- Suzuki K Poulose 7. Refine the dsb/cmb dataset support check in enable/disable functions. -- Suzuki K Poulose 8. Get rid of redundant code in function "set_cmb_tier". -- Suzuki K Poulose 9. Since one SysFs file should follow "one value", use "dev_ext_attribute" to instead of the previous "enable_ts" Sysfs file approach. -- Suzuki K Poulose 10. Change the kernel version to 6.9 for the MSR related SysFs file. -- James Clark 11. Refine the function "tpdm_simple_dataset_store". -- Suzuki K Poulose Changes in V3: 1. Add 8-bit support to the description in the TPDM devicetree document. -- Rob Herring 2. Change how the result is produced in "tpdm_read_element_size". -- James Clark 3. Calling "tpdm_clear_element_size" at the beginning of "tpda_enable_port". -- James Clark 4. Use "dsb_esize" and "cmb_esize" to determine whether multiple TPDMs are detected on a TPDA input port in "tpda_get_element_size". -- James Clark 5. Modify the judgment logic in "tpda_enable_port". -- James Clark 6. Add more description of "cmb_mode" to TPDM SysFS document. -- James Clark Changes in V2: 1. Optimizate and modify this patch series based on the patch series "Add support to configure TPDM CMB subunit". 2. Modify the functions that read the element size of DSB/CMB in TPDA driver. Tao Zhang (10): coresight-tpdm: Optimize the store function of tpdm simple dataset coresight-tpdm: Optimize the useage of tpdm_has_dsb_dataset dt-bindings: arm: Add support for CMB element size coresight-tpdm: Add CMB dataset support coresight-tpda: Add support to configure CMB element coresight-tpdm: Add support to configure CMB coresight-tpdm: Add pattern registers support for CMB coresight-tpdm: Add timestamp control register support for the CMB dt-bindings: arm: Add support for TPDM CMB MSR register coresight-tpdm: Add msr register support for CMB .../testing/sysfs-bus-coresight-devices-tpdm | 87 +++ .../bindings/arm/qcom,coresight-tpdm.yaml | 37 ++ drivers/hwtracing/coresight/coresight-tpda.c | 123 +++-- drivers/hwtracing/coresight/coresight-tpda.h | 6 + drivers/hwtracing/coresight/coresight-tpdm.c | 508 +++++++++++++++--- drivers/hwtracing/coresight/coresight-tpdm.h | 113 ++++ 6 files changed, 757 insertions(+), 117 deletions(-) -- 2.17.1

3 months

Re: [PATCH v4 03/10] dt-bindings: arm: Add support for CMB element size

by Tao Zhang

On 1/22/2024 4:42 PM, Krzysztof Kozlowski wrote: > On 19/01/2024 04:22, Tao Zhang wrote: >> Add property "qcom,cmb-elem-size" to support CMB(Continuous >> Multi-Bit) element for TPDM. The associated aggregator will read >> this size before it is enabled. CMB element size currently only >> supports 32-bit and 64-bit. >> >> Signed-off-by: Tao Zhang<quic_taozha(a)quicinc.com> >> Signed-off-by: Mao Jinlong<quic_jinlmao(a)quicinc.com> >> --- >> .../bindings/arm/qcom,coresight-tpdm.yaml | 27 +++++++++++++++++++ >> 1 file changed, 27 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml >> index 61ddc3b5b247..507a5f887097 100644 >> --- a/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml >> +++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml >> @@ -52,6 +52,15 @@ properties: >> $ref: /schemas/types.yaml#/definitions/uint8 >> enum: [32, 64] >> >> + qcom,cmb-element-size: >> + description: >> + Specifies the CMB(Continuous Multi-Bit) element size supported by >> + the monitor. The associated aggregator will read this size before it >> + is enabled. CMB element size currently only supports 8-bit, 32-bit >> + and 64-bit. >> + $ref: /schemas/types.yaml#/definitions/uint8 >> + enum: [8, 32, 64] > Is this in bits? If so, then qcom,cmb-element-bits or something similar. > I don't quite get what is "an element" here, but I assume you do, so you > will come with reasonable name. Yes, the unit of this element size is bit. This element size can be understood as that a CMB data set consists of values that are all N-bit binary vectors where N is 8, 32, or 64 bits. How about if we use "qcom,cmb-element-bits" here instead of "qcom,cmb-element-size"? > >> + >> qcom,dsb-msrs-num: >> description: >> Specifies the number of DSB(Discrete Single Bit) MSR(mux select register) >> @@ -110,4 +119,22 @@ examples: >> }; >> }; >> >> + tpdm@6c29000 { > You should explain why you need new example, so reviewers will not have > to go back to previous discussions to ask the same question over and > over again. Sure, I will add the explanation to the comments of the next commit. > >> + compatible = "qcom,coresight-tpdm", "arm,primecell"; >> + reg = <0x06c29000 0x1000>; >> + >> + qcom,cmb-element-size = /bits/ 8 <64>; >> + >> + clocks = <&aoss_qmp>; >> + clock-names = "apb_pclk"; >> + >> + out-ports { >> + port { >> + tpdm_ipcc_out_funnel_center: endpoint { >> + remote-endpoint = >> + <&funnel_center_in_tpdm_ipcc>; > Drop unneeded wrapping / line break. Sure, I will update in the next patch series. Best, Tao > > Best regards, > Krzysztof >

3 months

Re: [PATCH v4 03/10] dt-bindings: arm: Add support for CMB element size

by Tao Zhang

On 1/22/2024 4:42 PM, Krzysztof Kozlowski wrote: > On 19/01/2024 04:22, Tao Zhang wrote: >> Add property "qcom,cmb-elem-size" to support CMB(Continuous >> Multi-Bit) element for TPDM. The associated aggregator will read >> this size before it is enabled. CMB element size currently only >> supports 32-bit and 64-bit. >> >> Signed-off-by: Tao Zhang<quic_taozha(a)quicinc.com> >> Signed-off-by: Mao Jinlong<quic_jinlmao(a)quicinc.com> >> --- >> .../bindings/arm/qcom,coresight-tpdm.yaml | 27 +++++++++++++++++++ >> 1 file changed, 27 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml >> index 61ddc3b5b247..507a5f887097 100644 >> --- a/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml >> +++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml >> @@ -52,6 +52,15 @@ properties: >> $ref: /schemas/types.yaml#/definitions/uint8 >> enum: [32, 64] >> >> + qcom,cmb-element-size: >> + description: >> + Specifies the CMB(Continuous Multi-Bit) element size supported by >> + the monitor. The associated aggregator will read this size before it >> + is enabled. CMB element size currently only supports 8-bit, 32-bit >> + and 64-bit. >> + $ref: /schemas/types.yaml#/definitions/uint8 >> + enum: [8, 32, 64] > Is this in bits? If so, then qcom,cmb-element-bits or something similar. > I don't quite get what is "an element" here, but I assume you do, so you > will come with reasonable name. > > https://github.com/devicetree-org/dt-schema/blob/main/dtschema/schemas/prop… Yes, the unit of this element size is bit. This element size can be understood as that a CMB data set consists of values that are all N-bit binary vectors where N is 8, 32, or 64 bits. How about if we use "qcom,cmb-element-bits" here instead of "qcom,cmb-element-size"? > >> + >> qcom,dsb-msrs-num: >> description: >> Specifies the number of DSB(Discrete Single Bit) MSR(mux select register) >> @@ -110,4 +119,22 @@ examples: >> }; >> }; >> >> + tpdm@6c29000 { > You should explain why you need new example, so reviewers will not have > to go back to previous discussions to ask the same question over and > over again. Sure, I will add the explanation to the comments of the next commit. > >> + compatible = "qcom,coresight-tpdm", "arm,primecell"; >> + reg = <0x06c29000 0x1000>; >> + >> + qcom,cmb-element-size = /bits/ 8 <64>; >> + >> + clocks = <&aoss_qmp>; >> + clock-names = "apb_pclk"; >> + >> + out-ports { >> + port { >> + tpdm_ipcc_out_funnel_center: endpoint { >> + remote-endpoint = >> + <&funnel_center_in_tpdm_ipcc>; > Drop unneeded wrapping / line break. Sure, I will update in the next patch series. Best, Tao > > Best regards, > Krzysztof >

3 months

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

CoreSight January 2024