Hi Zeid,
On Sat, 31 Oct 2020 at 23:11, Zied Guermazi zied.guermazi@trande.de wrote:
hi,
while testing the implementation in gdb of branch tracing on arm processors using etm, I faced the the situation where a breakpoint was set, was hit and then the execution of the program was continued. While decoding generated traces, I got the address of the breakpoint (0x400552) executed twice, and then the following address (0x400554) also executed twice. the instruction at (0x400554) is a BL ( a function call) and the second execution corrupts the function history.
here is a dump of generated trace elements
trace_chan_id: 18 isa: CS_ETM_ISA_T32 start addr = 0x400552 end addr = 0x400554 instructions count = 1 last_i_type: OCSD_INSTR_OTHER last_i_subtype: OCSD_S_INSTR_NONE last instruction was executed last instruction size: 2
trace_chan_id: 18 isa: CS_ETM_ISA_T32 start addr = 0x400552 end addr = 0x400554 instructions count = 1 last_i_type: OCSD_INSTR_OTHER last_i_subtype: OCSD_S_INSTR_NONE last instruction was executed last instruction size: 2
trace_chan_id: 18 isa: CS_ETM_ISA_T32 start addr = 0x400554 end addr = 0x400558 instructions count = 1 last_i_type: OCSD_INSTR_BR last_i_subtype: OCSD_S_INSTR_BR_LINK last instruction was executed last instruction size: 4
trace_chan_id: 18 isa: CS_ETM_ISA_T32 start addr = 0x400554 end addr = 0x400558 instructions count = 1 last_i_type: OCSD_INSTR_BR last_i_subtype: OCSD_S_INSTR_BR_LINK last instruction was executed last instruction size: 4
the explanation I have for this behavior is that :
-when setting the software breakpoint, the memory content of the instruction (at 0x400552) was altered to the instruction BKPT,
-when the breakpoint was hit, the original opcode was set at (0x400552) and a BKPT was set to the next instruction address (0x400554), then the execution was continued
-when the second breakpoint (0x400554) was hit, the a BKPT opcode was set at (0x400552) and the original opcode was set at (0x400554) then the execution was continued
I am using the function "int target_read_code (CORE_ADDR memaddr, gdb_byte *myaddr, ssize_t len)" to give program memory content to the decoder. so the collected etm traces are correct, but, as memory was altered in between, the decoder is "cheated".
I need to identify the re-execution of code due to breakpoint handling, and roll back its impact on etm decoding.
is there a mean to get the actual content of program memory including patched addresses?
is there a means of getting the history of patched addresses during the debugging of a program?
what is the type and subtype of a BKPT instruction in a decoded trace elements?
I can only really comment on this question. The type / subtype information in the output from the decoder is generated from the decoder walking the memory image of the executed trace - not from the trace packets themselves. The decoder classifies instructions according to how they will affect trace flow with the "other" category being set for the majority of instructions. The categories are: other, branch, indirect branch, ISB / DSB / DMB / WFI / WFE. These are important in program flow trace (PTM 1.x, ETM 4.x) as these determine which instruction we attach the E/N atoms to. BKPT will be classified as "other", if it is seen, as it has no effect on normal program flow. It will cause an exception which has a specific trace packet format.
Regards
Mike
do you have any other idea for handling this situation?
I am attaching the source code of the program as well as the disassembled binary. the code was compiled as an application running on linux on an ARMv7 A (STM32MP157 SoC). the breakpoint was set at line 43 in the source code (line 238 in the disassembled code)
Kind Regards
Zied Guermazi
CoreSight mailing list CoreSight@lists.linaro.org https://lists.linaro.org/mailman/listinfo/coresight