" ERROR: Macros with multiple statements should be enclosed in a do - while loop"
Reported by checkpath.
do loop with the conditional expression set to a constant value of zero (0).This creates a loop that will execute exactly one time.This is a coding idiom that allows a multi-line macro to be used anywhere that a single statement can be used.
So, enclose `gb_loopback_stats_attrs` macro in do - while (0) to fix checkpath error
Signed-off-by: Menna Mahmoud eng.mennamahmoud.mm@gmail.com --- drivers/staging/greybus/loopback.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/greybus/loopback.c b/drivers/staging/greybus/loopback.c index 1a61fce98056..e86d50638cb5 100644 --- a/drivers/staging/greybus/loopback.c +++ b/drivers/staging/greybus/loopback.c @@ -162,10 +162,12 @@ static ssize_t name##_avg_show(struct device *dev, \ } \ static DEVICE_ATTR_RO(name##_avg)
-#define gb_loopback_stats_attrs(field) \ - gb_loopback_ro_stats_attr(field, min, u); \ - gb_loopback_ro_stats_attr(field, max, u); \ - gb_loopback_ro_avg_attr(field) +#define gb_loopback_stats_attrs(field) \ + do { \ + gb_loopback_ro_stats_attr(field, min, u); \ + gb_loopback_ro_stats_attr(field, max, u); \ + gb_loopback_ro_avg_attr(field); \ + } while (0)
#define gb_loopback_attr(field, type) \ static ssize_t field##_show(struct device *dev, \
On Sat, Mar 11, 2023 at 03:59:19PM +0200, Menna Mahmoud wrote:
" ERROR: Macros with multiple statements should be enclosed in a do - while loop"
Reported by checkpath.
do loop with the conditional expression set to a constant value of zero (0).This creates a loop that will execute exactly one time.This is a coding idiom that allows a multi-line macro to be used anywhere that a single statement can be used.
So, enclose `gb_loopback_stats_attrs` macro in do - while (0) to fix checkpath error
Signed-off-by: Menna Mahmoud eng.mennamahmoud.mm@gmail.com
This breaks the build. You need to compile the code before sending a patch.
regards, dan carpenter
On ١١/٣/٢٠٢٣ ١٦:٠٦, Dan Carpenter wrote:
On Sat, Mar 11, 2023 at 03:59:19PM +0200, Menna Mahmoud wrote:
" ERROR: Macros with multiple statements should be enclosed in a do - while loop"
Reported by checkpath.
do loop with the conditional expression set to a constant value of zero (0).This creates a loop that will execute exactly one time.This is a coding idiom that allows a multi-line macro to be used anywhere that a single statement can be used.
So, enclose `gb_loopback_stats_attrs` macro in do - while (0) to fix checkpath error
Signed-off-by: Menna Mahmoud eng.mennamahmoud.mm@gmail.com
This breaks the build. You need to compile the code before sending a patch.
regards, dan carpenter
I see, I thought building the file only enough. appreciate your feedback.
Thanks,
Menna
On Sat, 11 Mar 2023, Menna Mahmoud wrote:
On ١١/٣/٢٠٢٣ ١٦:٠٦, Dan Carpenter wrote:
On Sat, Mar 11, 2023 at 03:59:19PM +0200, Menna Mahmoud wrote:
" ERROR: Macros with multiple statements should be enclosed in a do - while loop"
Reported by checkpath.
do loop with the conditional expression set to a constant value of zero (0).This creates a loop that will execute exactly one time.This is a coding idiom that allows a multi-line macro to be used anywhere that a single statement can be used.
So, enclose `gb_loopback_stats_attrs` macro in do - while (0) to fix checkpath error
Signed-off-by: Menna Mahmoud eng.mennamahmoud.mm@gmail.com
This breaks the build. You need to compile the code before sending a patch.
regards, dan carpenter
I see, I thought building the file only enough. appreciate your feedback.
The outreachy tutorial explains how to compile everything in a subdirectory.
julia
On ١١/٣/٢٠٢٣ ١٧:٠٠, Julia Lawall wrote:
On Sat, 11 Mar 2023, Menna Mahmoud wrote:
On ١١/٣/٢٠٢٣ ١٦:٠٦, Dan Carpenter wrote:
On Sat, Mar 11, 2023 at 03:59:19PM +0200, Menna Mahmoud wrote:
" ERROR: Macros with multiple statements should be enclosed in a do - while loop"
Reported by checkpath.
do loop with the conditional expression set to a constant value of zero (0).This creates a loop that will execute exactly one time.This is a coding idiom that allows a multi-line macro to be used anywhere that a single statement can be used.
So, enclose `gb_loopback_stats_attrs` macro in do - while (0) to fix checkpath error
Signed-off-by: Menna Mahmoud eng.mennamahmoud.mm@gmail.com
This breaks the build. You need to compile the code before sending a patch.
regards, dan carpenter
I see, I thought building the file only enough. appreciate your feedback.
The outreachy tutorial explains how to compile everything in a subdirectory.
julia
Thanks Julia, I will check it.
Menna
Menna,
There is a typo in the subject line.
On Sat, 11 Mar 2023, Menna Mahmoud wrote:
" ERROR: Macros with multiple statements should be enclosed in a do - while loop"
Reported by checkpath.
do loop with the conditional expression set to a constant value of zero (0).This creates a loop that will execute exactly one time.This is a coding idiom that allows a multi-line macro to be used anywhere that a single statement can be used.
So, enclose `gb_loopback_stats_attrs` macro in do - while (0) to fix checkpath error
The log message should focus on what is done and why. The checkpatch warning text and the fact that the problem was detected using checkpatch is useful, but less, so it should come last, not first.
Here, what is done is to enclose a sequence of statements in a macro definition in a do-while loop with a test expression 0.
The reason why is to make it safe to use the sequence anywhere a single statement can be used.
A period at the end of a sentence should be followed by some whitespace before starting the next sentence.
julia
Signed-off-by: Menna Mahmoud eng.mennamahmoud.mm@gmail.com
drivers/staging/greybus/loopback.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/greybus/loopback.c b/drivers/staging/greybus/loopback.c index 1a61fce98056..e86d50638cb5 100644 --- a/drivers/staging/greybus/loopback.c +++ b/drivers/staging/greybus/loopback.c @@ -162,10 +162,12 @@ static ssize_t name##_avg_show(struct device *dev, \ } \ static DEVICE_ATTR_RO(name##_avg)
-#define gb_loopback_stats_attrs(field) \
- gb_loopback_ro_stats_attr(field, min, u); \
- gb_loopback_ro_stats_attr(field, max, u); \
- gb_loopback_ro_avg_attr(field)
+#define gb_loopback_stats_attrs(field) \
- do { \
gb_loopback_ro_stats_attr(field, min, u); \gb_loopback_ro_stats_attr(field, max, u); \gb_loopback_ro_avg_attr(field); \- } while (0)
#define gb_loopback_attr(field, type) \ static ssize_t field##_show(struct device *dev, \ -- 2.34.1
On ١١/٣/٢٠٢٣ ١٦:٣٦, Julia Lawall wrote:
Menna,
There is a typo in the subject line.
On Sat, 11 Mar 2023, Menna Mahmoud wrote:
" ERROR: Macros with multiple statements should be enclosed in a do - while loop"
Reported by checkpath.
do loop with the conditional expression set to a constant value of zero (0).This creates a loop that will execute exactly one time.This is a coding idiom that allows a multi-line macro to be used anywhere that a single statement can be used.
So, enclose `gb_loopback_stats_attrs` macro in do - while (0) to fix checkpath error
The log message should focus on what is done and why. The checkpatch warning text and the fact that the problem was detected using checkpatch is useful, but less, so it should come last, not first.
Here, what is done is to enclose a sequence of statements in a macro definition in a do-while loop with a test expression 0.
The reason why is to make it safe to use the sequence anywhere a single statement can be used.
A period at the end of a sentence should be followed by some whitespace before starting the next sentence.
julia
got it, thank you.
Menna
Signed-off-by: Menna Mahmoud eng.mennamahmoud.mm@gmail.com
drivers/staging/greybus/loopback.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/greybus/loopback.c b/drivers/staging/greybus/loopback.c index 1a61fce98056..e86d50638cb5 100644 --- a/drivers/staging/greybus/loopback.c +++ b/drivers/staging/greybus/loopback.c @@ -162,10 +162,12 @@ static ssize_t name##_avg_show(struct device *dev, \ } \ static DEVICE_ATTR_RO(name##_avg)
-#define gb_loopback_stats_attrs(field) \
- gb_loopback_ro_stats_attr(field, min, u); \
- gb_loopback_ro_stats_attr(field, max, u); \
- gb_loopback_ro_avg_attr(field)
+#define gb_loopback_stats_attrs(field) \
do { \
gb_loopback_ro_stats_attr(field, min, u); \gb_loopback_ro_stats_attr(field, max, u); \gb_loopback_ro_avg_attr(field); \} while (0)
#define gb_loopback_attr(field, type) \ static ssize_t field##_show(struct device *dev, \
-- 2.34.1
Hi Menna,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on staging/staging-testing]
url: https://github.com/intel-lab-lkp/linux/commits/Menna-Mahmoud/staging-greybus... patch link: https://lore.kernel.org/r/20230311135919.9129-1-eng.mennamahmoud.mm%40gmail.... patch subject: [PATCH] staging: greybus: eclose macro in a do - while loop config: m68k-allyesconfig (https://download.01.org/0day-ci/archive/20230311/202303112323.45L8NHi2-lkp@i...) compiler: m68k-linux-gcc (GCC) 12.1.0 reproduce (this is a W=1 build): wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross # https://github.com/intel-lab-lkp/linux/commit/a0856cd3d280813cb65e083f5a5c72... git remote add linux-review https://github.com/intel-lab-lkp/linux git fetch --no-tags linux-review Menna-Mahmoud/staging-greybus-eclose-macro-in-a-do-while-loop/20230311-220021 git checkout a0856cd3d280813cb65e083f5a5c72add1a89f15 # save the config file mkdir build_dir && cp config build_dir/.config COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=m68k olddefconfig COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=m68k SHELL=/bin/bash drivers/staging/
If you fix the issue, kindly add following tag where applicable | Reported-by: kernel test robot lkp@intel.com | Link: https://lore.kernel.org/oe-kbuild-all/202303112323.45L8NHi2-lkp@intel.com/
All errors (new ones prefixed by >>):
drivers/staging/greybus/loopback.c:166:9: error: expected identifier or '(' before 'do'
166 | do { \ | ^~ drivers/staging/greybus/loopback.c:273:1: note: in expansion of macro 'gb_loopback_stats_attrs' 273 | gb_loopback_stats_attrs(latency); | ^~~~~~~~~~~~~~~~~~~~~~~
drivers/staging/greybus/loopback.c:170:11: error: expected identifier or '(' before 'while'
170 | } while (0) | ^~~~~ drivers/staging/greybus/loopback.c:273:1: note: in expansion of macro 'gb_loopback_stats_attrs' 273 | gb_loopback_stats_attrs(latency); | ^~~~~~~~~~~~~~~~~~~~~~~
drivers/staging/greybus/loopback.c:166:9: error: expected identifier or '(' before 'do'
166 | do { \ | ^~ drivers/staging/greybus/loopback.c:275:1: note: in expansion of macro 'gb_loopback_stats_attrs' 275 | gb_loopback_stats_attrs(requests_per_second); | ^~~~~~~~~~~~~~~~~~~~~~~
drivers/staging/greybus/loopback.c:170:11: error: expected identifier or '(' before 'while'
170 | } while (0) | ^~~~~ drivers/staging/greybus/loopback.c:275:1: note: in expansion of macro 'gb_loopback_stats_attrs' 275 | gb_loopback_stats_attrs(requests_per_second); | ^~~~~~~~~~~~~~~~~~~~~~~
drivers/staging/greybus/loopback.c:166:9: error: expected identifier or '(' before 'do'
166 | do { \ | ^~ drivers/staging/greybus/loopback.c:277:1: note: in expansion of macro 'gb_loopback_stats_attrs' 277 | gb_loopback_stats_attrs(throughput); | ^~~~~~~~~~~~~~~~~~~~~~~
drivers/staging/greybus/loopback.c:170:11: error: expected identifier or '(' before 'while'
170 | } while (0) | ^~~~~ drivers/staging/greybus/loopback.c:277:1: note: in expansion of macro 'gb_loopback_stats_attrs' 277 | gb_loopback_stats_attrs(throughput); | ^~~~~~~~~~~~~~~~~~~~~~~
drivers/staging/greybus/loopback.c:166:9: error: expected identifier or '(' before 'do'
166 | do { \ | ^~ drivers/staging/greybus/loopback.c:279:1: note: in expansion of macro 'gb_loopback_stats_attrs' 279 | gb_loopback_stats_attrs(apbridge_unipro_latency); | ^~~~~~~~~~~~~~~~~~~~~~~
drivers/staging/greybus/loopback.c:170:11: error: expected identifier or '(' before 'while'
170 | } while (0) | ^~~~~ drivers/staging/greybus/loopback.c:279:1: note: in expansion of macro 'gb_loopback_stats_attrs' 279 | gb_loopback_stats_attrs(apbridge_unipro_latency); | ^~~~~~~~~~~~~~~~~~~~~~~
drivers/staging/greybus/loopback.c:166:9: error: expected identifier or '(' before 'do'
166 | do { \ | ^~ drivers/staging/greybus/loopback.c:281:1: note: in expansion of macro 'gb_loopback_stats_attrs' 281 | gb_loopback_stats_attrs(gbphy_firmware_latency); | ^~~~~~~~~~~~~~~~~~~~~~~
drivers/staging/greybus/loopback.c:170:11: error: expected identifier or '(' before 'while'
170 | } while (0) | ^~~~~ drivers/staging/greybus/loopback.c:281:1: note: in expansion of macro 'gb_loopback_stats_attrs' 281 | gb_loopback_stats_attrs(gbphy_firmware_latency); | ^~~~~~~~~~~~~~~~~~~~~~~
drivers/staging/greybus/loopback.c:319:10: error: 'dev_attr_latency_min' undeclared here (not in a function); did you mean 'dev_attr_timeout_min'?
319 | &dev_attr_latency_min.attr, | ^~~~~~~~~~~~~~~~~~~~ | dev_attr_timeout_min
drivers/staging/greybus/loopback.c:320:10: error: 'dev_attr_latency_max' undeclared here (not in a function); did you mean 'dev_attr_timeout_max'?
320 | &dev_attr_latency_max.attr, | ^~~~~~~~~~~~~~~~~~~~ | dev_attr_timeout_max
drivers/staging/greybus/loopback.c:321:10: error: 'dev_attr_latency_avg' undeclared here (not in a function)
321 | &dev_attr_latency_avg.attr, | ^~~~~~~~~~~~~~~~~~~~
drivers/staging/greybus/loopback.c:322:10: error: 'dev_attr_requests_per_second_min' undeclared here (not in a function)
322 | &dev_attr_requests_per_second_min.attr, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/staging/greybus/loopback.c:323:10: error: 'dev_attr_requests_per_second_max' undeclared here (not in a function)
323 | &dev_attr_requests_per_second_max.attr, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/staging/greybus/loopback.c:324:10: error: 'dev_attr_requests_per_second_avg' undeclared here (not in a function)
324 | &dev_attr_requests_per_second_avg.attr, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/staging/greybus/loopback.c:325:10: error: 'dev_attr_throughput_min' undeclared here (not in a function); did you mean 'dev_attr_timeout_min'?
325 | &dev_attr_throughput_min.attr, | ^~~~~~~~~~~~~~~~~~~~~~~ | dev_attr_timeout_min
drivers/staging/greybus/loopback.c:326:10: error: 'dev_attr_throughput_max' undeclared here (not in a function); did you mean 'dev_attr_timeout_max'?
326 | &dev_attr_throughput_max.attr, | ^~~~~~~~~~~~~~~~~~~~~~~ | dev_attr_timeout_max
drivers/staging/greybus/loopback.c:327:10: error: 'dev_attr_throughput_avg' undeclared here (not in a function)
327 | &dev_attr_throughput_avg.attr, | ^~~~~~~~~~~~~~~~~~~~~~~
drivers/staging/greybus/loopback.c:328:10: error: 'dev_attr_apbridge_unipro_latency_min' undeclared here (not in a function)
328 | &dev_attr_apbridge_unipro_latency_min.attr, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/staging/greybus/loopback.c:329:10: error: 'dev_attr_apbridge_unipro_latency_max' undeclared here (not in a function) 329 | &dev_attr_apbridge_unipro_latency_max.attr, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/staging/greybus/loopback.c:330:10: error: 'dev_attr_apbridge_unipro_latency_avg' undeclared here (not in a function) 330 | &dev_attr_apbridge_unipro_latency_avg.attr, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/staging/greybus/loopback.c:331:10: error: 'dev_attr_gbphy_firmware_latency_min' undeclared here (not in a function) 331 | &dev_attr_gbphy_firmware_latency_min.attr, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/staging/greybus/loopback.c:332:10: error: 'dev_attr_gbphy_firmware_latency_max' undeclared here (not in a function) 332 | &dev_attr_gbphy_firmware_latency_max.attr, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/staging/greybus/loopback.c:333:10: error: 'dev_attr_gbphy_firmware_latency_avg' undeclared here (not in a function) 333 | &dev_attr_gbphy_firmware_latency_avg.attr, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
vim +166 drivers/staging/greybus/loopback.c
164 165 #define gb_loopback_stats_attrs(field) \
166 do { \
167 gb_loopback_ro_stats_attr(field, min, u); \ 168 gb_loopback_ro_stats_attr(field, max, u); \ 169 gb_loopback_ro_avg_attr(field); \
170 } while (0)
171 172 #define gb_loopback_attr(field, type) \ 173 static ssize_t field##_show(struct device *dev, \ 174 struct device_attribute *attr, \ 175 char *buf) \ 176 { \ 177 struct gb_loopback *gb = dev_get_drvdata(dev); \ 178 return sprintf(buf, "%" #type "\n", gb->field); \ 179 } \ 180 static ssize_t field##_store(struct device *dev, \ 181 struct device_attribute *attr, \ 182 const char *buf, \ 183 size_t len) \ 184 { \ 185 int ret; \ 186 struct gb_loopback *gb = dev_get_drvdata(dev); \ 187 mutex_lock(&gb->mutex); \ 188 ret = sscanf(buf, "%"#type, &gb->field); \ 189 if (ret != 1) \ 190 len = -EINVAL; \ 191 else \ 192 gb_loopback_check_attr(gb, bundle); \ 193 mutex_unlock(&gb->mutex); \ 194 return len; \ 195 } \ 196 static DEVICE_ATTR_RW(field) 197 198 #define gb_dev_loopback_ro_attr(field, conn) \ 199 static ssize_t field##_show(struct device *dev, \ 200 struct device_attribute *attr, \ 201 char *buf) \ 202 { \ 203 struct gb_loopback *gb = dev_get_drvdata(dev); \ 204 return sprintf(buf, "%u\n", gb->field); \ 205 } \ 206 static DEVICE_ATTR_RO(field) 207 208 #define gb_dev_loopback_rw_attr(field, type) \ 209 static ssize_t field##_show(struct device *dev, \ 210 struct device_attribute *attr, \ 211 char *buf) \ 212 { \ 213 struct gb_loopback *gb = dev_get_drvdata(dev); \ 214 return sprintf(buf, "%" #type "\n", gb->field); \ 215 } \ 216 static ssize_t field##_store(struct device *dev, \ 217 struct device_attribute *attr, \ 218 const char *buf, \ 219 size_t len) \ 220 { \ 221 int ret; \ 222 struct gb_loopback *gb = dev_get_drvdata(dev); \ 223 mutex_lock(&gb->mutex); \ 224 ret = sscanf(buf, "%"#type, &gb->field); \ 225 if (ret != 1) \ 226 len = -EINVAL; \ 227 else \ 228 gb_loopback_check_attr(gb); \ 229 mutex_unlock(&gb->mutex); \ 230 return len; \ 231 } \ 232 static DEVICE_ATTR_RW(field) 233 234 static void gb_loopback_reset_stats(struct gb_loopback *gb); 235 static void gb_loopback_check_attr(struct gb_loopback *gb) 236 { 237 if (gb->us_wait > GB_LOOPBACK_US_WAIT_MAX) 238 gb->us_wait = GB_LOOPBACK_US_WAIT_MAX; 239 if (gb->size > gb_dev.size_max) 240 gb->size = gb_dev.size_max; 241 gb->requests_timedout = 0; 242 gb->requests_completed = 0; 243 gb->iteration_count = 0; 244 gb->send_count = 0; 245 gb->error = 0; 246 247 if (kfifo_depth < gb->iteration_max) { 248 dev_warn(gb->dev, 249 "cannot log bytes %u kfifo_depth %u\n", 250 gb->iteration_max, kfifo_depth); 251 } 252 kfifo_reset_out(&gb->kfifo_lat); 253 254 switch (gb->type) { 255 case GB_LOOPBACK_TYPE_PING: 256 case GB_LOOPBACK_TYPE_TRANSFER: 257 case GB_LOOPBACK_TYPE_SINK: 258 gb->jiffy_timeout = usecs_to_jiffies(gb->timeout); 259 if (!gb->jiffy_timeout) 260 gb->jiffy_timeout = GB_LOOPBACK_TIMEOUT_MIN; 261 else if (gb->jiffy_timeout > GB_LOOPBACK_TIMEOUT_MAX) 262 gb->jiffy_timeout = GB_LOOPBACK_TIMEOUT_MAX; 263 gb_loopback_reset_stats(gb); 264 wake_up(&gb->wq); 265 break; 266 default: 267 gb->type = 0; 268 break; 269 } 270 } 271 272 /* Time to send and receive one message */ 273 gb_loopback_stats_attrs(latency); 274 /* Number of requests sent per second on this cport */ 275 gb_loopback_stats_attrs(requests_per_second); 276 /* Quantity of data sent and received on this cport */ 277 gb_loopback_stats_attrs(throughput); 278 /* Latency across the UniPro link from APBridge's perspective */ 279 gb_loopback_stats_attrs(apbridge_unipro_latency); 280 /* Firmware induced overhead in the GPBridge */ 281 gb_loopback_stats_attrs(gbphy_firmware_latency); 282 283 /* Number of errors encountered during loop */ 284 gb_loopback_ro_attr(error); 285 /* Number of requests successfully completed async */ 286 gb_loopback_ro_attr(requests_completed); 287 /* Number of requests timed out async */ 288 gb_loopback_ro_attr(requests_timedout); 289 /* Timeout minimum in useconds */ 290 gb_loopback_ro_attr(timeout_min); 291 /* Timeout minimum in useconds */ 292 gb_loopback_ro_attr(timeout_max); 293 294 /* 295 * Type of loopback message to send based on protocol type definitions 296 * 0 => Don't send message 297 * 2 => Send ping message continuously (message without payload) 298 * 3 => Send transfer message continuously (message with payload, 299 * payload returned in response) 300 * 4 => Send a sink message (message with payload, no payload in response) 301 */ 302 gb_dev_loopback_rw_attr(type, d); 303 /* Size of transfer message payload: 0-4096 bytes */ 304 gb_dev_loopback_rw_attr(size, u); 305 /* Time to wait between two messages: 0-1000 ms */ 306 gb_dev_loopback_rw_attr(us_wait, d); 307 /* Maximum iterations for a given operation: 1-(2^32-1), 0 implies infinite */ 308 gb_dev_loopback_rw_attr(iteration_max, u); 309 /* The current index of the for (i = 0; i < iteration_max; i++) loop */ 310 gb_dev_loopback_ro_attr(iteration_count, false); 311 /* A flag to indicate synchronous or asynchronous operations */ 312 gb_dev_loopback_rw_attr(async, u); 313 /* Timeout of an individual asynchronous request */ 314 gb_dev_loopback_rw_attr(timeout, u); 315 /* Maximum number of in-flight operations before back-off */ 316 gb_dev_loopback_rw_attr(outstanding_operations_max, u); 317 318 static struct attribute *loopback_attrs[] = {
319 &dev_attr_latency_min.attr, 320 &dev_attr_latency_max.attr, 321 &dev_attr_latency_avg.attr, 322 &dev_attr_requests_per_second_min.attr, 323 &dev_attr_requests_per_second_max.attr, 324 &dev_attr_requests_per_second_avg.attr, 325 &dev_attr_throughput_min.attr, 326 &dev_attr_throughput_max.attr, 327 &dev_attr_throughput_avg.attr, 328 &dev_attr_apbridge_unipro_latency_min.attr, 329 &dev_attr_apbridge_unipro_latency_max.attr, 330 &dev_attr_apbridge_unipro_latency_avg.attr, 331 &dev_attr_gbphy_firmware_latency_min.attr, 332 &dev_attr_gbphy_firmware_latency_max.attr, 333 &dev_attr_gbphy_firmware_latency_avg.attr,
334 &dev_attr_type.attr, 335 &dev_attr_size.attr, 336 &dev_attr_us_wait.attr, 337 &dev_attr_iteration_count.attr, 338 &dev_attr_iteration_max.attr, 339 &dev_attr_async.attr, 340 &dev_attr_error.attr, 341 &dev_attr_requests_completed.attr, 342 &dev_attr_requests_timedout.attr, 343 &dev_attr_timeout.attr, 344 &dev_attr_outstanding_operations_max.attr, 345 &dev_attr_timeout_min.attr, 346 &dev_attr_timeout_max.attr, 347 NULL, 348 }; 349 ATTRIBUTE_GROUPS(loopback); 350
On 3/11/23 7:59 AM, Menna Mahmoud wrote:
" ERROR: Macros with multiple statements should be enclosed in a do - while loop"
Reported by checkpath.
This is also not an issue that should be "fixed."
If you look at where that macro is expanded, you see that its purpose is simply to reduce the possibility of some errors by enclosing some much-duplicated code in this macro. The expansion is at the top level of the source file, so a "do...while" loop ends up being an error.
When looking at the output of checkpatch, assume it's giving you clues about problems that one *might* like to fix. Its suggestions are most often reasonable, but in some cases (like this one) it's just not smart enough to recognize the problem that comes from following its advice.
Make sure you understand exactly what happens when you make a change. That means understanding the code, and then it means ensuring that the fix passes at least a compile test, and if possible an actual execution test.
-Alex
do loop with the conditional expression set to a constant value of zero (0).This creates a loop that will execute exactly one time.This is a coding idiom that allows a multi-line macro to be used anywhere that a single statement can be used.
So, enclose `gb_loopback_stats_attrs` macro in do - while (0) to fix checkpath error
Signed-off-by: Menna Mahmoud eng.mennamahmoud.mm@gmail.com
drivers/staging/greybus/loopback.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/greybus/loopback.c b/drivers/staging/greybus/loopback.c index 1a61fce98056..e86d50638cb5 100644 --- a/drivers/staging/greybus/loopback.c +++ b/drivers/staging/greybus/loopback.c @@ -162,10 +162,12 @@ static ssize_t name##_avg_show(struct device *dev, \ } \ static DEVICE_ATTR_RO(name##_avg) -#define gb_loopback_stats_attrs(field) \
- gb_loopback_ro_stats_attr(field, min, u); \
- gb_loopback_ro_stats_attr(field, max, u); \
- gb_loopback_ro_avg_attr(field)
+#define gb_loopback_stats_attrs(field) \
- do { \
gb_loopback_ro_stats_attr(field, min, u); \gb_loopback_ro_stats_attr(field, max, u); \gb_loopback_ro_avg_attr(field); \- } while (0)
#define gb_loopback_attr(field, type) \ static ssize_t field##_show(struct device *dev, \
On ١١/٣/٢٠٢٣ ٢١:١٠, Alex Elder wrote:
On 3/11/23 7:59 AM, Menna Mahmoud wrote:
" ERROR: Macros with multiple statements should be enclosed in a do - while loop"
Reported by checkpath.
This is also not an issue that should be "fixed."
If you look at where that macro is expanded, you see that its purpose is simply to reduce the possibility of some errors by enclosing some much-duplicated code in this macro. The expansion is at the top level of the source file, so a "do...while" loop ends up being an error.
When looking at the output of checkpatch, assume it's giving you clues about problems that one *might* like to fix. Its suggestions are most often reasonable, but in some cases (like this one) it's just not smart enough to recognize the problem that comes from following its advice.
Make sure you understand exactly what happens when you make a change. That means understanding the code, and then it means ensuring that the fix passes at least a compile test, and if possible an actual execution test.
-Alex
I see, Thanks Alex for explaining. I will check the code before making any change.
Menna
do loop with the conditional expression set to a constant value of zero (0).This creates a loop that will execute exactly one time.This is a coding idiom that allows a multi-line macro to be used anywhere that a single statement can be used.
So, enclose `gb_loopback_stats_attrs` macro in do - while (0) to fix checkpath error
Signed-off-by: Menna Mahmoud eng.mennamahmoud.mm@gmail.com
drivers/staging/greybus/loopback.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/greybus/loopback.c b/drivers/staging/greybus/loopback.c index 1a61fce98056..e86d50638cb5 100644 --- a/drivers/staging/greybus/loopback.c +++ b/drivers/staging/greybus/loopback.c @@ -162,10 +162,12 @@ static ssize_t name##_avg_show(struct device *dev, \ } \ static DEVICE_ATTR_RO(name##_avg) -#define gb_loopback_stats_attrs(field) \ - gb_loopback_ro_stats_attr(field, min, u); \ - gb_loopback_ro_stats_attr(field, max, u); \ - gb_loopback_ro_avg_attr(field) +#define gb_loopback_stats_attrs(field) \ + do { \ + gb_loopback_ro_stats_attr(field, min, u); \ + gb_loopback_ro_stats_attr(field, max, u); \ + gb_loopback_ro_avg_attr(field); \ + } while (0) #define gb_loopback_attr(field, type) \ static ssize_t field##_show(struct device *dev, \
-
Alex Elder -
Dan Carpenter -
Julia Lawall -
kernel test robot -
Menna Mahmoud