Kernel-build-reports November 2013

kernel-build-reports@lists.linaro.org

8 participants
403 discussions

OMAP baseline test results for v3.13-rc1 (toolchain Debian 4.7.2-5)

by Paul Walmsley

Here are some basic OMAP test results for Linux v3.13-rc1. Logs and other details at: http://www.pwsan.com/omap/testlogs/test_v3.13-rc1/20131124230250/ Test summary ------------ Build: uImage+dtb: Pass ( 3/ 3): omap2plus_defconfig_am33xx_only/am335x-bone, omap2plus_defconfig/omap4-panda, omap2plus_defconfig/omap4-panda-es Build: zImage: Pass ( 2/ 2): omap2plus_defconfig, omap2plus_defconfig_am33xx_only Build: uImage: Pass (14/14): omap1_defconfig, omap1_defconfig_1510innovator_only, omap1_defconfig_5912osk_only, omap2plus_defconfig, omap2plus_defconfig_2430sdp_only, omap2plus_defconfig_cpupm, omap2plus_defconfig_no_pm, omap2plus_defconfig_n800_only_a, omap2plus_defconfig_n800_multi_omap2xxx, omap2plus_defconfig_omap2_4_only, omap2plus_defconfig_omap3_4_only, rmk_omap3430_ldp_allnoconfig, rmk_omap3430_ldp_oldconfig, rmk_omap4430_sdp_allnoconfig Boot to userspace: FAIL ( 1/11): 37xxevm skip ( 1/ 1): 5912osk Pass (10/11): 2430sdp, 3517evm, 3530es3beagle, 3730beaglexm, 4430es2panda, 4460pandaes, am335xbone, am335xbonelt, cmt3517, 4460varsomom PM: chip retention via suspend: FAIL ( 4/ 7): 2430sdp, 37xxevm, 4430es2panda, 4460varsomom Pass ( 3/ 7): 3530es3beagle, 3730beaglexm, 4460pandaes PM: chip retention via dynamic idle: FAIL ( 5/ 7): 2430sdp, 37xxevm, 4430es2panda, 4460pandaes, 4460varsomom Pass ( 2/ 7): 3530es3beagle, 3730beaglexm PM: chip off except CORE via suspend: Pass ( 1/ 1): 3730beaglexm PM: chip off except CORE via dynamic idle: Pass ( 1/ 1): 3730beaglexm PM: chip off via suspend: FAIL ( 4/ 5): 37xxevm, 4430es2panda, 4460pandaes, 4460varsomom Pass ( 1/ 5): 3530es3beagle PM: chip off via dynamic idle: FAIL ( 4/ 5): 37xxevm, 4430es2panda, 4460pandaes, 4460varsomom Pass ( 1/ 5): 3530es3beagle vmlinux object size (delta in bytes from test_v3.12 (5e01dc7b26d9f24f39abace5da98ccbd6a5ceb52)): text data bss total kernel -351659 +384 +4216 -347059 omap1_defconfig -354695 +296 +4216 -350183 omap1_defconfig_1510innovator_only -354491 +360 +4216 -349915 omap1_defconfig_5912osk_only -276029 -5584 +5008 -276605 omap2plus_defconfig -292693 +9808 +4656 -278229 omap2plus_defconfig_2430sdp_only -273194 -5512 +5008 -273698 omap2plus_defconfig_cpupm +88436 +10392 +4368 +103196 omap2plus_defconfig_n800_multi_omap2xxx +88404 +10408 +4368 +103180 omap2plus_defconfig_n800_only_a -273765 -4704 +5008 -273461 omap2plus_defconfig_no_pm -263629 +13912 +4944 -244773 omap2plus_defconfig_omap2_4_only -270645 -5584 +5008 -271221 omap2plus_defconfig_omap3_4_only -119620 -10124 +2856 -126888 rmk_omap3430_ldp_allnoconfig +49719 +3928 +4352 +57999 rmk_omap3430_ldp_oldconfig -115704 +1788 +5608 -108308 rmk_omap4430_sdp_allnoconfig +4738404 +250480 +443152 +5432036 rmk_omap4430_sdp_oldnoconfig Re-enabled rmk_omap4430_sdp_oldnoconfig. A significant portion of the size delta is due to switch in the toolchain used for the testbed, to the Emdebian gcc 4.7. See also the message with the subject line "OMAP baseline test results for v3.13-rc1 (toolchain CodeSourcery 2010.09-50)" for the results with the previous compiler used. Boot-time memory difference (delta in bytes from test_v3.12 (5e01dc7b26d9f24f39abace5da98ccbd6a5ceb52)) avail rsrvd high freed board kconfig -104k 104k . 4k 2420n800 omap2plus_defconfig_n800_only_a 276k -276k . -8k 2430sdp omap2plus_defconfig 276k -276k . -8k 3517evm omap2plus_defconfig 276k -276k . -8k 3530es3beagle omap2plus_defconfig 276k -276k . -8k 3730beaglexm omap2plus_defconfig -227908k -33212k . -392k 37xxevm omap2plus_defconfig 272k -272k . -8k 4430es2panda omap2plus_defconfig 268k -268k . -8k 4460pandaes omap2plus_defconfig 272k -272k . -8k 4460varsomom omap2plus_defconfig 312k -312k . 4k am335xbone omap2plus_defconfig_am33xx_only 268k -268k . -8k am335xbonelt omap2plus_defconfig_am33xx_only

11 years

queue boot: 12 pass, 2 fail (v3.10.20-80-ga3f5004)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: queue Git describe: v3.10.20-80-ga3f5004 Failed boot tests (console logs at the end) =========================================== armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig armada-370-mirabox: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- omap3-beagle-xm PASS: 0 min 53.1 sec am335x-bone PASS: 0 min 26.4 sec omap4-panda PASS: 1 min 1.3 sec omap4-panda-es PASS: 1 min 10.5 sec omap3-tobi,3730storm PASS: 0 min 33.0 sec omap3-tobi,3530overo PASS: 0 min 33.6 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.8 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.6 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.6 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.5 sec armada-370-mirabox PASS: 0 min 19.5 sec multi_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 FAIL: 0 min 20.0 sec armada-370-mirabox FAIL: 0 min 17.8 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 16.4 sec Console logs for failures ========================= multi_v7_defconfig ------------------ armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------ [<c0013bcc>] (unwind_backtrace+0x0/0xf4) from [<c0011490>] (show_stack+0x10/0x14) [<c0011490>] (show_stack+0x10/0x14) from [<c0275880>] (panic+0xa0/0x1e8) [<c0275880>] (panic+0xa0/0x1e8) from [<c0328110>] (mount_block_root+0x294/0x298) [<c0328110>] (mount_block_root+0x294/0x298) from [<c03282c4>] (prepare_namespace+0x14c/0x184) [<c03282c4>] (prepare_namespace+0x14c/0x184) from [<c0327d60>] (kernel_init_freeable+0x1c8/0x1d8) [<c0327d60>] (kernel_init_freeable+0x1c8/0x1d8) from [<c02715f0>] (kernel_init+0x8/0x158) [<c02715f0>] (kernel_init+0x8/0x158) from [<c000df18>] (ret_from_fork+0x14/0x3c) CPU0: stopping CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.20-00080-ga3f5004 #1 [<c0013bcc>] (unwind_backtrace+0x0/0xf4) from [<c0011490>] (show_stack+0x10/0x14) [<c0011490>] (show_stack+0x10/0x14) from [<c001234c>] (handle_IPI+0x108/0x130) [<c001234c>] (handle_IPI+0x108/0x130) from [<c000851c>] (armada_370_xp_handle_irq+0x90/0xa8) [<c000851c>] (armada_370_xp_handle_irq+0x90/0xa8) from [<c000dac0>] (__irq_svc+0x40/0x50) Exception stack(0xc0357f70 to 0xc0357fb8) 7f60: c1d586d8 00000000 000000c2 000000c2 7f80: c035e4a8 c0356000 c035e45c c0381a6c c027cebc c0356000 c0381a6c c0356000 7fa0: 0000001f c0357fb8 c000f070 c004f8e0 60000113 ffffffff [<c000dac0>] (__irq_svc+0x40/0x50) from [<c004f8e0>] (cpu_startup_entry+0xfc/0x140) [<c004f8e0>] (cpu_startup_entry+0xfc/0x140) from [<c0327a3c>] (start_kernel+0x2c4/0x2d0) [<c0327a3c>] (start_kernel+0x2c4/0x2d0) from [<00008074>] (0x8074) ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Kernel panic # PYBOOT: Time: 19.96 seconds. # PYBOOT: Result: FAIL armada-370-mirabox: FAIL: last 24 lines of boot log: ---------------------------------------------------- mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6 Registering SWP/SWPB emulation handler /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) List of all partitions: No filesystem could mount root, tried: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.20-00080-ga3f5004 #1 [<c0013bcc>] (unwind_backtrace+0x0/0xf4) from [<c0011490>] (show_stack+0x10/0x14) [<c0011490>] (show_stack+0x10/0x14) from [<c0275880>] (panic+0xa0/0x1e8) [<c0275880>] (panic+0xa0/0x1e8) from [<c0328110>] (mount_block_root+0x294/0x298) [<c0328110>] (mount_block_root+0x294/0x298) from [<c03282c4>] (prepare_namespace+0x14c/0x184) [<c03282c4>] (prepare_namespace+0x14c/0x184) from [<c0327d60>] (kernel_init_freeable+0x1c8/0x1d8) [<c0327d60>] (kernel_init_freeable+0x1c8/0x1d8) from [<c02715f0>] (kernel_init+0x8/0x158) [<c02715f0>] (kernel_init+0x8/0x158) from [<c000df18>] (ret_from_fork+0x14/0x3c) ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Kernel panic # PYBOOT: Time: 17.84 seconds. # PYBOOT: Result: FAIL

11 years

rmk boot: 8 passed 4 failed (rmk/v3.13-rc2-21-gfb4bdc5)

by Olof's autobooter

arndale : OFFLINE 0:30.49 bbb : passed 1:44.86 beaver : passed 0:41.63 multi-beaver : passed 0:31.83 cubie : passed 0:45.55 cubie2 : passed 0:51.07 cubox : OFFLINE 0:30.47 panda : FAILED 0:59.35 multi-panda : FAILED 2:57.10 sama5 : OFFLINE 0:30.47 snowball : passed 1:09.05 multi-snowball : FAILED 2:15.42 multi-trimslice : passed 0:39.87 wandboard : FAILED 1:43.54 multi-wandboard : passed 0:37.92 Board legend: Board : System SoC Defconfig arndale : InSignal ArndaleBoard Samsung Exynos 5250 exynos_defconfig bbb : BeagleBone Black TI Sitara AM3359 omap2plus_defconfig beaver : Nvidia Beaver Nvidia Tegra 30 tegra_defconfig multi-beaver : multi_v7_defconfig cubie : Cubieboard Allwinner A10 multi_v7_defconfig cubie2 : Cubieboard 2 Allwinner A20 multi_v7_defconfig cubox : SolidRun Cubox Marvell 88AP510 dove_defconfig multi-trimslice : CompuLab TrimSlice Nvidia Tegra 20 multi_v7_defconfig panda : TI PandaBoard ES TI OMAP4460 omap2plus_defconfig multi-panda : multi_v7_defconfig sama5 : Atmel SAMA5 devboard Atmel SAMA5D35 sama5_defconfig snowball : CALAO Snowball ST-Ericsson A9500 u8500_defconfig multi-snowball : multi_v7_defconfig wandboard : Wandboard Freescale i.MX6 Quad imx_v6_v7_defconfig multi-wandboard : multi_v7_defconfig Last entries of failed logs below: ======================================================================== Board multi-panda failure log: ------------------------------------------------- [ 1.566680] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 1.573089] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 1.579376] omap-dma-engine 4a056000.dma-controller: allocating channel for 62 [ 1.587127] omap-dma-engine 4a056000.dma-controller: allocating channel for 61 [ 1.596588] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 1.651794] twl_rtc rtc.11: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 1.661010] Waiting for root device /dev/mmcblk0p2... [ 1.699798] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 1.826477] mmc0: host does not support reading read-only switch. assuming write-enable. [ 1.836914] mmc0: new high speed SDHC card at address b368 [ 1.843139] mmcblk0: mmc0:b368 00000 7.51 GiB [ 1.849304] mmcblk0: p1 p2 [ 1.875549] hub 1-1:1.0: USB hub found [ 1.879669] hub 1-1:1.0: 5 ports detected [ 1.916656] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 1.926269] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 1.937988] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 1.945953] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 2.193939] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 5.402435] EXT4-fs (mmcblk0p2): recovery complete [ 5.877624] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 5.886230] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 5.902252] devtmpfs: mounted [ 5.905914] Freeing unused kernel memory: 468K (c0649000 - c06be000) [ 6.120666] init: Failed to create pty - disabling logging for job [ 6.128814] init: Temporary process spawn error: No space left on device [ 6.177032] init: Failed to create pty - disabling logging for job [ 6.184082] init: Temporary process spawn error: No space left on device [ 6.200958] init: Failed to create pty - disabling logging for job [ 6.200958] init: Temporary process spawn error: No space left on device [ 6.217529] init: Failed to create pty - disabling logging for job [ 6.224090] init: Temporary process spawn error: No space left on device [ 6.326934] init: ureadahead main process (59) terminated with status 5 [ 6.453002] init: Failed to create pty - disabling logging for job [ 6.453002] init: Temporary process spawn error: No space left on device [ 6.480651] init: Failed to create pty - disabling logging for job [ 6.481781] init: Temporary process spawn error: No space left on device [ 6.539276] init: Failed to create pty - disabling logging for job [ 6.546264] init: Temporary process spawn error: No space left on device ~$off ======================================================================== Board multi-snowball failure log: ------------------------------------------------- [ 18.312652] NET: Registered protocol family 35 [ 18.317565] NET: Registered protocol family 37 [ 18.322235] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 2 [ 18.330383] Registering SWP/SWPB emulation handler [ 18.343139] l2x0-prefetch: initialized. [ 18.350433] mcde_display_hdmi_init [ 18.355041] regulator_init_complete: LDO-USB: disabling [ 18.360443] regulator_init_complete: db8500-esram34: disabling [ 18.366394] regulator_init_complete: db8500-esram12: disabling [ 18.391021] ab8500-rtc ab8500-rtc.0: setting system clock to 2013-11-30 23:19:37 UTC (1385853577) [ 18.921295] net eth0: SMSC911x/921x identified at 0xe08c0000, IRQ: 300 [ 19.732818] av8100_hdmi av8100_hdmi.1: HDMI display probed [ 19.831665] av8100 0-0070: chip version:2 [ 19.931579] Sending DHCP requests .Console: switching to colour frame buffer device 160x45 [ 20.921325] av8100_hdmi av8100_hdmi.1: Framebuffer created (av8100_hdmi) [ 22.511474] .node: snowball status: on ., OK [ 30.091461] IP-Config: Got DHCP answer from 172.16.1.7, my address is 172.16.1.153 [ 30.101135] IP-Config: Complete: [ 30.104614] device=eth0, addr=172.16.1.153, mask=255.255.255.0, gw=172.16.1.1, [ 30.112213] host=172.16.1.153, domain=lixom.net, nis-domain=(none), [ 30.118957] bootserver=172.16.1.7, rootserver=172.16.1.7, rootpath= [ 30.128173] EXT3-fs (mmcblk0p3): error: couldn't mount because of unsupported optional features (240) [ 30.232574] EXT2-fs (mmcblk0p3): error: couldn't mount because of unsupported optional features (244) [ 30.723449] EXT4-fs (mmcblk0p3): warning: checktime reached, running e2fsck is recommended [ 30.735778] EXT4-fs (mmcblk0p3): recovery complete [ 30.743927] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 30.752197] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 30.759704] devtmpfs: mounted [ 30.762969] Freeing init memory: 216K Last login: Wed Sep 11 20:13:55 UTC 2013 on tty1 root Welcome to Linaro 11.09 (development branch) (GNU/Linux 2.6.38-1001-ux500 armv7l) * Documentation: https://wiki.linaro.org/ root root@linaro-nano:~# root -bash: root: command not found root@linaro-nano:~# ~$off ======================================================================== Board panda failure log: ------------------------------------------------- [ 2.258880] of_get_named_gpio_flags: can't parse gpios property [ 2.265197] of_get_named_gpio_flags: can't parse gpios property [ 2.271606] omap-dma-engine 4a056000.dma-controller: allocating channel for 62 [ 2.279418] omap-dma-engine 4a056000.dma-controller: allocating channel for 61 [ 2.290313] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.337280] twl_rtc rtc.10: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.346191] Waiting for root device /dev/mmcblk0p2... [ 2.491119] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.501739] mmc0: new high speed SDHC card at address b368 [ 2.509307] mmcblk0: mmc0:b368 00000 7.51 GiB [ 2.517517] mmcblk0: p1 p2 [ 2.575775] EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240) [ 2.587280] EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (244) [ 2.601501] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 2.609313] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 5.661743] EXT4-fs (mmcblk0p2): recovery complete [ 6.134796] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 6.134918] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 6.155609] devtmpfs: mounted [ 6.155609] Freeing unused kernel memory: 376K (c06f2000 - c0750000) [ 6.420074] init: Failed to create pty - disabling logging for job [ 6.429504] init: Temporary process spawn error: No space left on device [ 6.484832] init: Failed to create pty - disabling logging for job [ 6.491729] init: Temporary process spawn error: No space left on device [ 6.513854] init: Failed to create pty - disabling logging for job [ 6.520538] init: Temporary process spawn error: No space left on device [ 6.530761] init: Failed to create pty - disabling logging for job [ 6.538604] init: Temporary process spawn error: No space left on device [ 6.645996] init: ureadahead main process (785) terminated with status 5 [ 6.798400] init: Failed to create pty - disabling logging for job [ 6.805206] init: Temporary process spawn error: No space left on device [ 6.835723] init: Failed to create pty - disabling logging for job [ 6.835723] init: Temporary process spawn error: No space left on device [ 6.924621] init: Failed to create pty - disabling logging for job [ 6.924621] init: Temporary process spawn error: No space left on device modprobe: FATAL: Could not load /lib/modules/3.11.0-rc1-00018-g16fc5bc/modules.dep: No such file or directory modprobe: FATAL: Could not load /lib/modules/3.11.0-rc1-00018-g16fc5bc/modules.dep: No such file or directory ~$off ======================================================================== Board wandboard failure log: ------------------------------------------------- TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) sit0 Link encap:IPv6-in-IPv4 NOARP MTU:1480 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) root@wandboard:~# halt halt Broadcast message from root@wandboard (ttymxc0) (Thu Jan 1 00:00:22 1970): The system is going down for system halt NOW! INIT: Switching to runlevel: 0 INIT: Sending processes the TERM signanode wandboard status: off U-Boot 2013.07-dirty (Aug 04 2013 - 23:26:03) CPU: Freescale i.MX6Q rev1.2 at 792 MHz Reset cause: POR Board: Wandboard DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 In: serial Out: serial Err: serial Net: FEC [PRIME] Hit any key to stop autoboot: 1 0 mmc0 is current device SD/MMC found on device 0 ** File not found uEnv.txt ** Checking if uenvcmd is set ... Running default loadzimage ... ** File not found zImage ** => node: wandboard status: on node: wandboard status: on ~$off

11 years

rmk boot: 15 passed 0 failed (rmk/v3.13-rc1-14-g021af24)

by Olof's autobooter

arndale : passed 0:51.55 bbb : passed 1:55.92 beaver : passed 0:57.82 multi-beaver : passed 0:28.85 cubie : passed 0:56.65 cubie2 : passed 0:56.52 cubox : passed 0:50.77 panda : passed 2:52.77 multi-panda : passed 2:45.69 sama5 : passed 1:38.89 snowball : passed 0:54.90 multi-snowball : passed 0:37.88 multi-trimslice : passed 0:33.27 wandboard : passed 0:58.76 multi-wandboard : passed 0:34.71 Board legend: Board : System SoC Defconfig arndale : InSignal ArndaleBoard Samsung Exynos 5250 exynos_defconfig bbb : BeagleBone Black TI Sitara AM3359 omap2plus_defconfig beaver : Nvidia Beaver Nvidia Tegra 30 tegra_defconfig multi-beaver : multi_v7_defconfig cubie : Cubieboard Allwinner A10 multi_v7_defconfig cubie2 : Cubieboard 2 Allwinner A20 multi_v7_defconfig cubox : SolidRun Cubox Marvell 88AP510 dove_defconfig multi-trimslice : CompuLab TrimSlice Nvidia Tegra 20 multi_v7_defconfig panda : TI PandaBoard ES TI OMAP4460 omap2plus_defconfig multi-panda : multi_v7_defconfig sama5 : Atmel SAMA5 devboard Atmel SAMA5D35 sama5_defconfig snowball : CALAO Snowball ST-Ericsson A9500 u8500_defconfig multi-snowball : multi_v7_defconfig wandboard : Wandboard Freescale i.MX6 Quad imx_v6_v7_defconfig multi-wandboard : multi_v7_defconfig

11 years

queue boot: 12 pass, 2 fail (v3.10.21-24-g644ed47)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: queue Git describe: v3.10.21-24-g644ed47 Failed boot tests (console logs at the end) =========================================== armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig armada-370-mirabox: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- omap3-beagle-xm PASS: 0 min 51.7 sec am335x-bone PASS: 0 min 26.3 sec omap4-panda PASS: 1 min 4.7 sec omap4-panda-es PASS: 1 min 4.7 sec omap3-tobi,3730storm PASS: 0 min 36.3 sec omap3-tobi,3530overo PASS: 0 min 33.5 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 18.2 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.5 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.4 sec armada-370-mirabox PASS: 0 min 19.5 sec multi_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 FAIL: 0 min 20.0 sec armada-370-mirabox FAIL: 0 min 17.9 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 16.4 sec Console logs for failures ========================= multi_v7_defconfig ------------------ armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------ [<c0013bcc>] (unwind_backtrace+0x0/0xf4) from [<c0011490>] (show_stack+0x10/0x14) [<c0011490>] (show_stack+0x10/0x14) from [<c0275880>] (panic+0xa0/0x1e8) [<c0275880>] (panic+0xa0/0x1e8) from [<c0328110>] (mount_block_root+0x294/0x298) [<c0328110>] (mount_block_root+0x294/0x298) from [<c03282c4>] (prepare_namespace+0x14c/0x184) [<c03282c4>] (prepare_namespace+0x14c/0x184) from [<c0327d60>] (kernel_init_freeable+0x1c8/0x1d8) [<c0327d60>] (kernel_init_freeable+0x1c8/0x1d8) from [<c02715f0>] (kernel_init+0x8/0x158) [<c02715f0>] (kernel_init+0x8/0x158) from [<c000df18>] (ret_from_fork+0x14/0x3c) CPU0: stopping CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.21-00024-g644ed47 #1 [<c0013bcc>] (unwind_backtrace+0x0/0xf4) from [<c0011490>] (show_stack+0x10/0x14) [<c0011490>] (show_stack+0x10/0x14) from [<c001234c>] (handle_IPI+0x108/0x130) [<c001234c>] (handle_IPI+0x108/0x130) from [<c000851c>] (armada_370_xp_handle_irq+0x90/0xa8) [<c000851c>] (armada_370_xp_handle_irq+0x90/0xa8) from [<c000dac0>] (__irq_svc+0x40/0x50) Exception stack(0xc0357f70 to 0xc0357fb8) 7f60: c1d586d8 00000000 000000c2 000000c2 7f80: c035e4a8 c0356000 c035e45c c0381a6c c027cebc c0356000 c0381a6c c0356000 7fa0: 0000001f c0357fb8 c000f070 c004f8e0 60000113 ffffffff [<c000dac0>] (__irq_svc+0x40/0x50) from [<c004f8e0>] (cpu_startup_entry+0xfc/0x140) [<c004f8e0>] (cpu_startup_entry+0xfc/0x140) from [<c0327a3c>] (start_kernel+0x2c4/0x2d0) [<c0327a3c>] (start_kernel+0x2c4/0x2d0) from [<00008074>] (0x8074) ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Kernel panic # PYBOOT: Time: 19.96 seconds. # PYBOOT: Result: FAIL armada-370-mirabox: FAIL: last 24 lines of boot log: ---------------------------------------------------- mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6 Registering SWP/SWPB emulation handler /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) List of all partitions: No filesystem could mount root, tried: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.21-00024-g644ed47 #1 [<c0013bcc>] (unwind_backtrace+0x0/0xf4) from [<c0011490>] (show_stack+0x10/0x14) [<c0011490>] (show_stack+0x10/0x14) from [<c0275880>] (panic+0xa0/0x1e8) [<c0275880>] (panic+0xa0/0x1e8) from [<c0328110>] (mount_block_root+0x294/0x298) [<c0328110>] (mount_block_root+0x294/0x298) from [<c03282c4>] (prepare_namespace+0x14c/0x184) [<c03282c4>] (prepare_namespace+0x14c/0x184) from [<c0327d60>] (kernel_init_freeable+0x1c8/0x1d8) [<c0327d60>] (kernel_init_freeable+0x1c8/0x1d8) from [<c02715f0>] (kernel_init+0x8/0x158) [<c02715f0>] (kernel_init+0x8/0x158) from [<c000df18>] (ret_from_fork+0x14/0x3c) ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Kernel panic # PYBOOT: Time: 17.95 seconds. # PYBOOT: Result: FAIL

11 years

queue boot: 6 passed 9 failed (queue/v3.10.21-24-g644ed47)

by Olof's autobooter

arndale : passed 0:48.64 bbb : FAILED 1:14.25 beaver : passed 0:34.17 multi-beaver : FAILED 0:49.77 cubie : FAILED 0:12.77 cubie2 : FAILED 0:53.66 cubox : passed 0:51.78 panda : passed 2:51.20 multi-panda : FAILED 0:47.12 sama5 : passed 1:36.46 snowball : passed 0:50.18 multi-snowball : FAILED 0:43.57 multi-trimslice : FAILED 0:38.92 wandboard : FAILED 0:43.64 multi-wandboard : FAILED 0:41.14 Board legend: Board : System SoC Defconfig arndale : InSignal ArndaleBoard Samsung Exynos 5250 exynos_defconfig bbb : BeagleBone Black TI Sitara AM3359 omap2plus_defconfig beaver : Nvidia Beaver Nvidia Tegra 30 tegra_defconfig multi-beaver : multi_v7_defconfig cubie : Cubieboard Allwinner A10 multi_v7_defconfig cubie2 : Cubieboard 2 Allwinner A20 multi_v7_defconfig cubox : SolidRun Cubox Marvell 88AP510 dove_defconfig multi-trimslice : CompuLab TrimSlice Nvidia Tegra 20 multi_v7_defconfig panda : TI PandaBoard ES TI OMAP4460 omap2plus_defconfig multi-panda : multi_v7_defconfig sama5 : Atmel SAMA5 devboard Atmel SAMA5D35 sama5_defconfig snowball : CALAO Snowball ST-Ericsson A9500 u8500_defconfig multi-snowball : multi_v7_defconfig wandboard : Wandboard Freescale i.MX6 Quad imx_v6_v7_defconfig multi-wandboard : multi_v7_defconfig Last entries of failed logs below: ======================================================================== Board bbb failure log: ------------------------------------------------- Environment size: 4203/131068 bytes U-Boot# setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp' setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp' U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp U-Boot# tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.10.21-24-g644ed47/uImage.omap tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.10.21-24-g644ed47/uImage.omap link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.4; our IP address is 172.16.1.110 Filename '/srv/tftp/queue/v3.10.21-24-g644ed47/uImage.omap'. Load address: 0x80000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ###### 625 KiB/s done Bytes transferred = 4019968 (3d5700 hex) U-Boot# tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.21-24-g644ed47/am335x-boneblack.dtb tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.21-24-g644ed47/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.4; our IP address is 172.16.1.110 Filename '/srv/tftp/queue/v3.10.21-24-g644ed47/am335x-boneblack.dtb'. Load address: 0x81000000 Loading: * TFTP error: 'File not found' (1) Not retrying... U-Boot# ~$off ======================================================================== Board cubie failure log: ------------------------------------------------- io scheduler deadline registered io scheduler cfq registered (default) sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver ipmi message handler version 39.2 IPMI System Interface driver. ipmi_si: Adding default-specified kcs state machine ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca2-0000000000000ca2> Trying to free nonexistent resource <0000000000000ca3-0000000000000ca3> ipmi_si: Adding default-specified smic state machine ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca9-0000000000000ca9> Trying to free nonexistent resource <0000000000000caa-0000000000000caa> Trying to free nonexistent resource <0000000000000cab-0000000000000cab> ipmi_si: Adding default-specified bt state machine ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <00000000000000e4-00000000000000e4> Trying to free nonexistent resource <00000000000000e5-00000000000000e5> Trying to free nonexistent resource <00000000000000e6-00000000000000e6> ipmi_si: Unable to find any System Interface(s) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 17) is a U6_16550A console [ttynode: cubie status: on S0] enabled usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 Registering SWP/SWPB emulation handler /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) List of all partitions: No filesystem could mount root, tried: Kernel panic - not s~$off ======================================================================== Board cubie2 failure log: ------------------------------------------------- netmask=255.255.255.0 panicarg=panic=10 partition=0:1 scriptaddr=0x44000000 serverip=172.16.1.4 setargs=if test -z \\"$root\\"; then if test \\"$bootpath\\" = "boot/"; then root="/dev/mmcblk0p1 rootwait"; else root="/dev/mmcblk0p2 rootwait"; fi; fi; setenv bootargs console=${console} root=${root} loglevel=${loglevel} ${panicarg} ${extraargs} stderr=serial stdin=serial stdout=serial Environment size: 2099/131068 bytes sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.10.21-24-g644ed47/uImage.multi-1g tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.10.21-24-g644ed47/uImage.multi-1g Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.156 Filename '/srv/tftp/queue/v3.10.21-24-g644ed47/uImage.multi-1g'. Load address: 0x41000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 2.7 MiB/s done Bytes transferred = 1820736 (1bc840 hex) sun7i# tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.10.21-24-g644ed47/sun7i-a20-cubieboard2.dtb tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.10.21-24-g644ed47/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.156 Filename '/srv/tftp/queue/v3.10.21-24-g644ed47/sun7i-a20-cubieboard2.dtb'. Load address: 0x42000000 Loading: * TFTP error: 'File not found' (1) Not retrying... sun7i# node: cubie2 status: on ~$off ======================================================================== Board multi-beaver failure log: ------------------------------------------------- Using asx0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.177 Filename '/srv/tftp/queue/v3.10.21-24-g644ed47/uImage.multi-2g'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 1.9 MiB/s done Bytes transferred = 1820736 (1bc840 hex) Tegra30 (Beaver) # tftpboot 0x83000000 172.16.1.4:/srv/tftp/queue/v3.10.21-24-g644ed47/tegra30-beaver.dtb tftpboot 0x83000000 172.16.1.4:/srv/tftp/queue/v3.10.21-24-g644ed47/tegra30-beaver.dtb Using asx0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.177 Filename '/srv/tftp/queue/v3.10.21-24-g644ed47/tegra30-beaver.dtb'. Load address: 0x83000000 Loading: *#### 1.4 MiB/s done Bytes transferred = 16546 (40a2 hex) Tegra30 (Beaver) # bootm 0x82000000 - 0x83000000 bootm 0x82000000 - 0x83000000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1820672 Bytes = 1.7 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Kernel Image ... OK Loading Device Tree to 8fff8000, end 8ffff0a1 ... OK Starting kernel ... ~$off ======================================================================== Board multi-panda failure log: ------------------------------------------------- TFTP from server 172.16.1.4; our IP address is 172.16.1.182 Filename '/srv/tftp/queue/v3.10.21-24-g644ed47/uImage.multi-2g'. Load address: 0x80000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### done Bytes transferred = 1820736 (1bc840 hex) Panda # tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.21-24-g644ed47/omap4-panda-es.dtb tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.21-24-g644ed47/omap4-panda-es.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.182 Filename '/srv/tftp/queue/v3.10.21-24-g644ed47/omap4-panda-es.dtb'. Load address: 0x81000000 Loading: *#### done Bytes transferred = 17271 (4377 hex) Panda # bootm 0x80000000 - 0x81000000 bootm 0x80000000 - 0x81000000 ## Booting kernel from Legacy Image at 80000000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1820672 Bytes = 1.7 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 81000000 Booting using the fdt blob at 0x81000000 Loading Kernel Image ... OK OK reserving fdt memory region: addr=9d000000 size=3000000 Using Device Tree in place at 81000000, end 81007376 Starting kernel ... ~$off ======================================================================== Board multi-snowball failure log: ------------------------------------------------- ipaddr=172.16.1.124 serverip=172.16.1.7 bootfile=queue/v3.10.21-24-g644ed47/uImage.multi-snowball autoboot=no Environment size: 1706/4092 bytes U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.10.21-24-g644ed47/uImage.multi-snowball tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.10.21-24-g644ed47/uImage.multi-snowball smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.124 Filename '/srv/tftp/queue/v3.10.21-24-g644ed47/uImage.multi-snowball'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### done Bytes transferred = 1820736 (1bc840 hex) U8500 $ bootm 0x100000 bootm 0x100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1820672 Bytes = 1.7 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off ======================================================================== Board multi-trimslice failure log: ------------------------------------------------- *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.137 TrimSlice # setenv bootfile queue/v3.10.21-24-g644ed47/uImage.multi-trimslice setenv bootfile queue/v3.10.21-24-g644ed47/uImage.multi-trimslice TrimSlice # setenv autoboot no setenv autoboot no TrimSlice # printenv printenv bootdelay=5 baudrate=115200 loadaddr=0x408000 stdin=serial,usbkbd stdout=serial,lcd stderr=serial,lcd console=ttyS0,115200n8 ethact=RTL8169#0 gateway=172.16.1.1 bootcmd=none bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw autoload=no netmask=255.255.255.0 ipaddr=172.16.1.137 serverip=172.16.1.7 bootfile=queue/v3.10.21-24-g644ed47/uImage.multi-trimslice autoboot=no Environment size: 376/65532 bytes TrimSlice # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw TrimSlice # tftpboot 0x800000 172.16.1.4:/srv/tftp/queue/v3.10.21-24-g644ed47/uImage.multi-trimslice tftpboot 0x800000 172.16.1.4:/srv/tftp/queue/v3.10.21-24-g644ed47/uImage.multi-trimslice Using RTL8169#0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.137 Filename '/srv/tftp/queue/v3.10.21-24-g644ed47/uImage.multi-trimslice'. Load address: 0x800000 Loading: * TFTP error: 'File not found' (1) Not retrying... TrimSlice # ~$off ======================================================================== Board multi-wandboard failure log: ------------------------------------------------- mmcroot=/dev/mmcblk0p2 ro mmcrootfstype=ext4 rootwait netargs=setenv bootargs console=${console},${baudrate} root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp netboot=echo Booting from net ...; run netargs; if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; ${get_cmd} zImage; if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if ${get_cmd} ${fdt_addr} ${fdt_file}; then bootz ${loadaddr} - ${fdt_addr}; else if test ${boot_fdt} = try; then bootz ${loadaddr}; else echo WARN: Cannot load the DT; fi; fi; else bootz ${loadaddr}; fi; netmask=255.255.255.0 script=boot.scr serverip=172.16.1.7 uimage=uImage update_sd_firmware=if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; if mmc dev ${mmcdev}; then if ${get_cmd} ${update_sd_firmware_filename}; then setexpr fw_sz ${filesize} / 0x200; setexpr fw_sz ${fw_sz} + 1; mmc write ${loadaddr} 0x2 ${fw_sz}; fi; fi update_sd_firmware_filename=u-boot.imx Environment size: 2719/8188 bytes => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.10.21-24-g644ed47/uImage.multi-256m tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.10.21-24-g644ed47/uImage.multi-256m Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.157 Filename '/srv/tftp/queue/v3.10.21-24-g644ed47/uImage.multi-256m'. Load address: 0x12000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 3.6 MiB/s done Bytes transferred = 1820736 (1bc840 hex) => tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.10.21-24-g644ed47/imx6q-wandboard.dtb tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.10.21-24-g644ed47/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.157 Filename '/srv/tftp/queue/v3.10.21-24-g644ed47/imx6q-wandboard.dtb'. Load address: 0x14000000 Loading: * TFTP error: 'File not found' (1) Not retrying... => ~$off ======================================================================== Board wandboard failure log: ------------------------------------------------- update_sd_firmware=if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; if mmc dev ${mmcdev}; then if ${get_cmd} ${update_sd_firmware_filename}; then setexpr fw_sz ${filesize} / 0x200; setexpr fw_sz ${fw_sz} + 1; mmc write ${loadaddr} 0x2 ${fw_sz}; fi; fi update_sd_firmware_filename=u-boot.imx Environment size: 2712/8188 bytes => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.10.21-24-g644ed47/uImage.imx tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.10.21-24-g644ed47/uImage.imx Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.157 Filename '/srv/tftp/queue/v3.10.21-24-g644ed47/uImage.imx'. Load address: 0x12000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########################################## 3.7 MiB/s done Bytes transferred = 4205000 (4029c8 hex) => tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.10.21-24-g644ed47/imx6q-wandboard.dtb tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.10.21-24-g644ed47/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.157 Filename '/srv/tftp/queue/v3.10.21-24-g644ed47/imx6q-wandboard.dtb'. Load address: 0x14000000 Loading: * TFTP error: 'File not found' (1) Not retrying... => node: wandboard status: on ~$off

11 years

queue build: 23 warnings 0 failures (queue/v3.10.21-24-g644ed47)

by Olof's autobuilder

11 years

queue boot: 23 pass, 0 fail (v3.11.10)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: queue Git describe: v3.11.10 Full Report =========== omap2plus_defconfig ------------------- omap3-beagle-xm PASS: 0 min 51.7 sec am335x-bone PASS: 0 min 26.5 sec omap4-panda PASS: 1 min 5.5 sec omap4-panda-es PASS: 1 min 5.7 sec omap3-tobi,3730storm PASS: 0 min 24.4 sec omap3-tobi,3530overo PASS: 0 min 21.7 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 15.7 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 15.9 sec imx6dl-wandboard,wand-solo PASS: 0 min 15.7 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.9 sec armada-370-mirabox PASS: 0 min 19.9 sec multi_v7_defconfig ------------------ tegra30-beaver PASS: 0 min 17.2 sec omap3-beagle-xm PASS: 0 min 50.7 sec armada-370-mirabox PASS: 0 min 20.5 sec am335x-bone PASS: 0 min 33.6 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.1 sec omap4-panda PASS: 1 min 3.3 sec omap4-panda-es PASS: 1 min 3.8 sec omap3-tobi,3730storm PASS: 0 min 22.7 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.3 sec omap3-tobi,3530overo PASS: 0 min 20.2 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.3 sec

11 years

queue boot: 10 passed 5 failed (queue/v3.11.10)

by Olof's autobooter

arndale : passed 0:50.59 bbb : FAILED 1:13.42 beaver : passed 0:33.93 multi-beaver : passed 0:29.15 cubie2 : FAILED 0:48.77 cubie : passed 0:47.64 cubox : passed 0:48.45 panda : passed 2:48.78 multi-panda : passed 2:45.87 sama5 : passed 1:31.89 snowball : passed 1:10.42 multi-snowball : FAILED 0:47.13 multi-trimslice : passed 0:43.72 wandboard : FAILED 0:41.05 multi-wandboard : FAILED 0:40.67 Board legend: Board : System SoC Defconfig arndale : InSignal ArndaleBoard Samsung Exynos 5250 exynos_defconfig bbb : BeagleBone Black TI Sitara AM3359 omap2plus_defconfig beaver : Nvidia Beaver Nvidia Tegra 30 tegra_defconfig multi-beaver : multi_v7_defconfig cubie : Cubieboard Allwinner A10 multi_v7_defconfig cubie2 : Cubieboard 2 Allwinner A20 multi_v7_defconfig cubox : SolidRun Cubox Marvell 88AP510 dove_defconfig multi-trimslice : CompuLab TrimSlice Nvidia Tegra 20 multi_v7_defconfig panda : TI PandaBoard ES TI OMAP4460 omap2plus_defconfig multi-panda : multi_v7_defconfig sama5 : Atmel SAMA5 devboard Atmel SAMA5D35 sama5_defconfig snowball : CALAO Snowball ST-Ericsson A9500 u8500_defconfig multi-snowball : multi_v7_defconfig wandboard : Wandboard Freescale i.MX6 Quad imx_v6_v7_defconfig multi-wandboard : multi_v7_defconfig Last entries of failed logs below: ======================================================================== Board bbb failure log: ------------------------------------------------- Environment size: 4191/131068 bytes U-Boot# setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp' setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp' U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp U-Boot# tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.11.10/uImage.omap tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.11.10/uImage.omap link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.4; our IP address is 172.16.1.110 Filename '/srv/tftp/queue/v3.11.10/uImage.omap'. Load address: 0x80000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# #################### 625 KiB/s done Bytes transferred = 4091872 (3e6fe0 hex) U-Boot# tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.11.10/am335x-boneblack.dtb tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.11.10/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.4; our IP address is 172.16.1.110 Filename '/srv/tftp/queue/v3.11.10/am335x-boneblack.dtb'. Load address: 0x81000000 Loading: * TFTP error: 'File not found' (1) Not retrying... U-Boot# ~$off ======================================================================== Board cubie2 failure log: ------------------------------------------------- setargs=if test -z \\"$root\\"; then if test \\"$bootpath\\" = "boot/"; then root="/dev/mmcblk0p1 rootwait"; else root="/dev/mmcblk0p2 rootwait"; fi; fi; setenv bootargs console=${console} root=${root} loglevel=${loglevel} ${panicarg} ${extraargs} stderr=serial stdin=serial stdout=serial Environment size: 2087/131068 bytes sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.11.10/uImage.multi-1g tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.11.10/uImage.multi-1g Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.156 Filename '/srv/tftp/queue/v3.11.10/uImage.multi-1g'. Load address: 0x41000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 2.8 MiB/s done Bytes transferred = 3598976 (36ea80 hex) sun7i# tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.11.10/sun7i-a20-cubieboard2.dtb tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.11.10/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.156 Filename '/srv/tftp/queue/v3.11.10/sun7i-a20-cubieboard2.dtb'. Load address: 0x42000000 Loading: * TFTP error: 'File not found' (1) Not retrying... sun7i# node: cubie2 status: on ~$off ======================================================================== Board multi-snowball failure log: ------------------------------------------------- Environment size: 1694/4092 bytes U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.11.10/uImage.multi-snowball tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.11.10/uImage.multi-snowball smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.124 Filename '/srv/tftp/queue/v3.11.10/uImage.multi-snowball'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ######################################################### done Bytes transferred = 3615698 (372bd2 hex) U8500 $ bootm 0x100000 bootm 0x100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3615634 Bytes = 3.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off ======================================================================== Board multi-wandboard failure log: ------------------------------------------------- script=boot.scr serverip=172.16.1.7 uimage=uImage update_sd_firmware=if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; if mmc dev ${mmcdev}; then if ${get_cmd} ${update_sd_firmware_filename}; then setexpr fw_sz ${filesize} / 0x200; setexpr fw_sz ${fw_sz} + 1; mmc write ${loadaddr} 0x2 ${fw_sz}; fi; fi update_sd_firmware_filename=u-boot.imx Environment size: 2707/8188 bytes => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.11.10/uImage.multi-256m tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.11.10/uImage.multi-256m Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.157 Filename '/srv/tftp/queue/v3.11.10/uImage.multi-256m'. Load address: 0x12000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 3.6 MiB/s done Bytes transferred = 3598976 (36ea80 hex) => tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.11.10/imx6q-wandboard.dtb tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.11.10/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.157 Filename '/srv/tftp/queue/v3.11.10/imx6q-wandboard.dtb'. Load address: 0x14000000 Loading: * TFTP error: 'File not found' (1) Not retrying... => ~$off ======================================================================== Board wandboard failure log: ------------------------------------------------- uimage=uImage update_sd_firmware=if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; if mmc dev ${mmcdev}; then if ${get_cmd} ${update_sd_firmware_filename}; then setexpr fw_sz ${filesize} / 0x200; setexpr fw_sz ${fw_sz} + 1; mmc write ${loadaddr} 0x2 ${fw_sz}; fi; fi update_sd_firmware_filename=u-boot.imx Environment size: 2700/8188 bytes => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.11.10/uImage.imx tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.11.10/uImage.imx Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.157 Filename '/srv/tftp/queue/v3.11.10/uImage.imx'. Load address: 0x12000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################################# 3.6 MiB/s done Bytes transferred = 4304624 (41aef0 hex) => tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.11.10/imx6q-wandboard.dtb tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.11.10/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.157 Filename '/srv/tftp/queue/v3.11.10/imx6q-wandboard.dtb'. Load address: 0x14000000 Loading: * TFTP error: 'File not found' (1) Not retrying... => ~$off

11 years

queue build: 16 warnings 0 failures (queue/v3.11.10)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was queue, found at: Local queue of patches applied from http://git.kernel.org/cgit/linux/kernel/git/stable/stable-queue.git Topmost commit: 5ee54f3 Linux 3.11.10 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/queue/v3.11.10/ Runtime: 33m 28s Passed: 119 Failed: 0 Warnings: 16 Section mismatches: 8 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 arch/arm/mach-omap2/gpmc.c:1495:4: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' [-Wformat=] 1 drivers/dma/ste_dma40.c:3228:2: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' [-Wformat=] 1 drivers/dma/ste_dma40.c:3582:3: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' [-Wformat=] 1 drivers/dma/ste_dma40.c:3582:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'resource_size_t' [-Wformat=] 1 drivers/dma/ste_dma40.c:3593:5: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'resource_size_t' [-Wformat=] 1 drivers/mmc/host/tmio_mmc_pio.c:798:19: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 drivers/spi/spi-pl022.c:2197:9: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 drivers/tty/serial/imx.c:1134:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 4 drivers/usb/host/xhci.c:3574:17: warning: unused variable 'dev' [-Wunused-variable] 4 drivers/usb/host/xhci.c:3660:17: warning: unused variable 'dev' [-Wunused-variable] Section mismatches: 1 bcm_defconfig WARNING: drivers/built-in.o(.data+0x5a7c): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the function .init.text:sdhci_bcm_kona_probe() 1 bcm_defconfig WARNING: drivers/built-in.o(.data+0x5aa4): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the (unknown reference) .init.data:(unknown) 1 bcm_defconfig WARNING: drivers/mmc/built-in.o(.data+0x4dc): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the function .init.text:sdhci_bcm_kona_probe() 1 bcm_defconfig WARNING: drivers/mmc/built-in.o(.data+0x504): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the (unknown reference) .init.data:(unknown) 1 bcm_defconfig WARNING: drivers/mmc/host/built-in.o(.data+0x0): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the function .init.text:sdhci_bcm_kona_probe() 1 bcm_defconfig WARNING: drivers/mmc/host/built-in.o(.data+0x28): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the (unknown reference) .init.data:(unknown) 1 bcm_defconfig WARNING: vmlinux.o(.data+0xe43c): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the function .init.text:sdhci_bcm_kona_probe() 1 bcm_defconfig WARNING: vmlinux.o(.data+0xe464): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the (unknown reference) .init.data:(unknown)

11 years

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports November 2013