Kernel-build-reports November 2013

kernel-build-reports@lists.linaro.org

8 participants
403 discussions

mainline boot: 15 passed 0 failed (mainline/v3.12-rc7-119-g17f6ee4)

by Olof's autobooter

arndale : passed 0:50.16 bbb : passed 1:55.71 beaver : passed 0:55.14 multi-beaver : passed 0:31.20 cubie2 : passed 0:58.78 cubie : passed 0:56.89 cubox : passed 0:49.74 panda : passed 2:49.88 multi-panda : passed 2:46.28 sama5 : passed 1:48.80 snowball : passed 1:23.08 multi-snowball : passed 0:37.87 multi-trimslice : passed 0:36.15 wandboard : passed 0:57.67 multi-wandboard : passed 0:30.39 Board legend: Board : System SoC Defconfig arndale : InSignal ArndaleBoard Samsung Exynos 5250 exynos_defconfig bbb : BeagleBone Black TI Sitara AM3359 omap2plus_defconfig beaver : Nvidia Beaver Nvidia Tegra 30 tegra_defconfig multi-beaver : multi_v7_defconfig cubie : Cubieboard Allwinner A10 multi_v7_defconfig cubie2 : Cubieboard 2 Allwinner A20 multi_v7_defconfig cubox : SolidRun Cubox Marvell 88AP510 dove_defconfig multi-trimslice : CompuLab TrimSlice Nvidia Tegra 20 multi_v7_defconfig panda : TI PandaBoard ES TI OMAP4460 omap2plus_defconfig multi-panda : multi_v7_defconfig sama5 : Atmel SAMA5 devboard Atmel SAMA5D35 sama5_defconfig snowball : CALAO Snowball ST-Ericsson A9500 u8500_defconfig multi-snowball : multi_v7_defconfig wandboard : Wandboard Freescale i.MX6 Quad imx_v6_v7_defconfig multi-wandboard : multi_v7_defconfig

11 years, 2 months

mainline build: 16 warnings 0 failures (mainline/v3.12-rc7-119-g17f6ee4)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 17f6ee4 Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.12-rc7-119-g17f6ee4/ Runtime: 38m 24s Passed: 117 Failed: 0 Warnings: 16 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:589:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:599:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1092:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1166:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/cdma_hw.c:57:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/debug_hw.c:175:10: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' [-Wformat=] 1 drivers/tty/serial/imx.c:1542:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:120:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] Section mismatches:

11 years, 2 months

mainline boot: 29 pass, 2 fail (v3.12-rc7-114-g9dc8c89)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.12-rc7-114-g9dc8c89 Failed boot tests (console logs at the end) =========================================== am335x-boneblack: FAIL: omap2plus_defconfig sun4i-a10-cubieboard: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack FAIL: 0 min 41.2 sec omap3-beagle-xm PASS: 0 min 52.4 sec am335x-bone PASS: 0 min 26.1 sec omap4-panda PASS: 1 min 6.5 sec omap4-panda-es PASS: 1 min 3.0 sec omap3-tobi,3730storm PASS: 0 min 24.0 sec omap3-tobi,3530overo PASS: 0 min 21.3 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 16.8 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.3 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.1 sec imx6q-wandboard PASS: 0 min 14.6 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 22.1 sec armada-370-mirabox PASS: 0 min 19.9 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.8 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 28.2 sec tegra30-beaver PASS: 0 min 16.3 sec am335x-boneblack PASS: 0 min 34.4 sec omap3-beagle-xm PASS: 0 min 51.1 sec armada-370-mirabox PASS: 0 min 20.5 sec omap4-panda PASS: 1 min 13.0 sec omap4-panda-es PASS: 1 min 0.2 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.9 sec sun4i-a10-cubieboard FAIL: 0 min 6.9 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.3 sec am335x-bone PASS: 0 min 33.2 sec imx6q-wandboard PASS: 0 min 15.7 sec omap3-tobi,3730storm PASS: 0 min 19.4 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.6 sec omap3-tobi,3530overo PASS: 0 min 19.6 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 36.8 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.3 sec Console logs for failures ========================= omap2plus_defconfig ------------------- am335x-boneblack: FAIL: last 24 lines of boot log: -------------------------------------------------- U-Boot# dhcp dhcp link up on port 0, speed 1000, full duplex BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 BOOTP broadcast 6 BOOTP broadcast 7 BOOTP broadcast 8 BOOTP broadcast 9 BOOTP broadcast 10 dhcp Retry count exceeded; starting again using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC c8:a0:30:b4:18:a4 HOST MAC de:ad:be:af:00:00 RNDIS ready ~$off # PYBOOT: Exception: u-boot: ERROR: DHCP retry count exceeded. # PYBOOT: Time: 41.19 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ sun4i-a10-cubieboard: FAIL: last 24 lines of boot log: ------------------------------------------------------ U-Boot 2011.09-rc1 (Nov 26 2012 - 14:01:52) Allwinner Technology arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 sunxi#setenv ethaddr 2e:40:70:f0:12:08 setenv ethaddr 2e:40:70:f0:12:08 sunxi#setenv bootargs console=ttyS0,115200 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sunxi#setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sunxi#setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sunxi#if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sunxi#if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sunxi#setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sunxi#dhcp dhcp Unknown command 'dhcp' - try 'help' sunxi#~$off # PYBOOT: Exception: u-boot: does not support DHCP. Giving up. # PYBOOT: Time: 6.90 seconds. # PYBOOT: Result: FAIL

11 years, 2 months

mainline boot: 15 passed 0 failed (mainline/v3.12-rc7-114-g9dc8c89)

by Olof's autobooter

arndale : passed 0:51.31 bbb : passed 1:59.82 beaver : passed 0:49.65 multi-beaver : passed 0:33.94 cubie : passed 0:59.85 cubie2 : passed 1:03.15 cubox : passed 0:53.54 panda : passed 2:48.90 multi-panda : passed 2:45.50 sama5 : passed 1:29.80 snowball : passed 1:18.97 multi-snowball : passed 0:38.12 multi-trimslice : passed 0:42.08 wandboard : passed 1:06.28 multi-wandboard : passed 0:30.98 Board legend: Board : System SoC Defconfig arndale : InSignal ArndaleBoard Samsung Exynos 5250 exynos_defconfig bbb : BeagleBone Black TI Sitara AM3359 omap2plus_defconfig beaver : Nvidia Beaver Nvidia Tegra 30 tegra_defconfig multi-beaver : multi_v7_defconfig cubie : Cubieboard Allwinner A10 multi_v7_defconfig cubie2 : Cubieboard 2 Allwinner A20 multi_v7_defconfig cubox : SolidRun Cubox Marvell 88AP510 dove_defconfig multi-trimslice : CompuLab TrimSlice Nvidia Tegra 20 multi_v7_defconfig panda : TI PandaBoard ES TI OMAP4460 omap2plus_defconfig multi-panda : multi_v7_defconfig sama5 : Atmel SAMA5 devboard Atmel SAMA5D35 sama5_defconfig snowball : CALAO Snowball ST-Ericsson A9500 u8500_defconfig multi-snowball : multi_v7_defconfig wandboard : Wandboard Freescale i.MX6 Quad imx_v6_v7_defconfig multi-wandboard : multi_v7_defconfig

11 years, 2 months

mainline build: 16 warnings 0 failures (mainline/v3.12-rc7-114-g9dc8c89)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 9dc8c89 Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.12-rc7-114-g9dc8c89/ Runtime: 38m 10s Passed: 117 Failed: 0 Warnings: 16 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:589:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:599:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1092:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1166:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/cdma_hw.c:57:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/debug_hw.c:175:10: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' [-Wformat=] 1 drivers/tty/serial/imx.c:1542:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:120:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] Section mismatches:

11 years, 2 months

queue boot: 13 pass, 3 fail (v3.10.17-54-g0efdef4)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: queue Git describe: v3.10.17-54-g0efdef4 Failed boot tests (console logs at the end) =========================================== armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig armada-370-mirabox: FAIL: multi_v7_defconfig sun4i-a10-cubieboard: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- omap3-beagle-xm PASS: 0 min 53.8 sec am335x-bone PASS: 0 min 31.3 sec omap4-panda PASS: 1 min 4.2 sec omap4-panda-es PASS: 1 min 4.0 sec omap3-tobi,3730storm PASS: 0 min 35.6 sec omap3-tobi,3530overo PASS: 0 min 33.4 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.9 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.6 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.5 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.6 sec armada-370-mirabox PASS: 0 min 19.5 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.1 sec multi_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 FAIL: 0 min 20.2 sec armada-370-mirabox FAIL: 0 min 17.9 sec sun4i-a10-cubieboard FAIL: 1 min 8.9 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 16.4 sec Console logs for failures ========================= multi_v7_defconfig ------------------ armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------ [<c0013bcc>] (unwind_backtrace+0x0/0xf4) from [<c0011490>] (show_stack+0x10/0x14) [<c0011490>] (show_stack+0x10/0x14) from [<c0275740>] (panic+0xa0/0x1e8) [<c0275740>] (panic+0xa0/0x1e8) from [<c0326110>] (mount_block_root+0x294/0x298) [<c0326110>] (mount_block_root+0x294/0x298) from [<c03262c4>] (prepare_namespace+0x14c/0x184) [<c03262c4>] (prepare_namespace+0x14c/0x184) from [<c0325d60>] (kernel_init_freeable+0x1c8/0x1d8) [<c0325d60>] (kernel_init_freeable+0x1c8/0x1d8) from [<c02714a0>] (kernel_init+0x8/0x158) [<c02714a0>] (kernel_init+0x8/0x158) from [<c000df18>] (ret_from_fork+0x14/0x3c) CPU0: stopping CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.17-00054-g0efdef4 #1 [<c0013bcc>] (unwind_backtrace+0x0/0xf4) from [<c0011490>] (show_stack+0x10/0x14) [<c0011490>] (show_stack+0x10/0x14) from [<c001234c>] (handle_IPI+0x108/0x130) [<c001234c>] (handle_IPI+0x108/0x130) from [<c000851c>] (armada_370_xp_handle_irq+0x90/0xa8) [<c000851c>] (armada_370_xp_handle_irq+0x90/0xa8) from [<c000dac0>] (__irq_svc+0x40/0x50) Exception stack(0xc0355f70 to 0xc0355fb8) 5f60: c1d566d8 00000000 000000be 000000be 5f80: c037fa2c c035c4a8 c027cebc c0354000 c037fa2c c0354000 c0354000 c035c45c 5fa0: 0000001f c0355fb8 c000f070 c004f8e0 60000113 ffffffff [<c000dac0>] (__irq_svc+0x40/0x50) from [<c004f8e0>] (cpu_startup_entry+0xfc/0x140) [<c004f8e0>] (cpu_startup_entry+0xfc/0x140) from [<c0325a3c>] (start_kernel+0x2c4/0x2d0) [<c0325a3c>] (start_kernel+0x2c4/0x2d0) from [<00008074>] (0x8074) ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Kernel panic # PYBOOT: Time: 20.17 seconds. # PYBOOT: Result: FAIL armada-370-mirabox: FAIL: last 24 lines of boot log: ---------------------------------------------------- mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6 Registering SWP/SWPB emulation handler ../../drivers/rtc/hctosys.c: unable to open rtc device (rtc0) List of all partitions: No filesystem could mount root, tried: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.17-00054-g0efdef4 #1 [<c0013bcc>] (unwind_backtrace+0x0/0xf4) from [<c0011490>] (show_stack+0x10/0x14) [<c0011490>] (show_stack+0x10/0x14) from [<c0275740>] (panic+0xa0/0x1e8) [<c0275740>] (panic+0xa0/0x1e8) from [<c0326110>] (mount_block_root+0x294/0x298) [<c0326110>] (mount_block_root+0x294/0x298) from [<c03262c4>] (prepare_namespace+0x14c/0x184) [<c03262c4>] (prepare_namespace+0x14c/0x184) from [<c0325d60>] (kernel_init_freeable+0x1c8/0x1d8) [<c0325d60>] (kernel_init_freeable+0x1c8/0x1d8) from [<c02714a0>] (kernel_init+0x8/0x158) [<c02714a0>] (kernel_init+0x8/0x158) from [<c000df18>] (ret_from_fork+0x14/0x3c) ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Kernel panic # PYBOOT: Time: 17.89 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 24 lines of boot log: ------------------------------------------------------ ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <00000000000000e4-00000000000000e4> Trying to free nonexistent resource <00000000000000e5-00000000000000e5> Trying to free nonexistent resource <00000000000000e6-00000000000000e6> ipmi_si: Unable to find any System Interface(s) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 17) is a U6_16550A console [ttyS0] enabled usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 Registering SWP/SWPB emulation handler ../../drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 68.94 seconds. # PYBOOT: Result: FAIL

11 years, 2 months

queue boot: 5 passed 10 failed (queue/v3.10.17-54-g0efdef4)

by Olof's autobooter

arndale : passed 0:48.16 bbb : FAILED 1:14.42 beaver : passed 0:32.93 multi-beaver : FAILED 0:49.35 cubie2 : FAILED 0:52.80 cubie : FAILED 0:13.12 cubox : passed 0:51.15 panda : passed 3:00.48 multi-panda : FAILED 0:47.60 sama5 : passed 1:48.14 snowball : FAILED 1:39.88 multi-snowball : FAILED 0:43.76 multi-trimslice : FAILED 0:44.41 wandboard : FAILED 0:41.06 multi-wandboard : FAILED 0:44.04 Board legend: Board : System SoC Defconfig arndale : InSignal ArndaleBoard Samsung Exynos 5250 exynos_defconfig bbb : BeagleBone Black TI Sitara AM3359 omap2plus_defconfig beaver : Nvidia Beaver Nvidia Tegra 30 tegra_defconfig multi-beaver : multi_v7_defconfig cubie : Cubieboard Allwinner A10 multi_v7_defconfig cubie2 : Cubieboard 2 Allwinner A20 multi_v7_defconfig cubox : SolidRun Cubox Marvell 88AP510 dove_defconfig multi-trimslice : CompuLab TrimSlice Nvidia Tegra 20 multi_v7_defconfig panda : TI PandaBoard ES TI OMAP4460 omap2plus_defconfig multi-panda : multi_v7_defconfig sama5 : Atmel SAMA5 devboard Atmel SAMA5D35 sama5_defconfig snowball : CALAO Snowball ST-Ericsson A9500 u8500_defconfig multi-snowball : multi_v7_defconfig wandboard : Wandboard Freescale i.MX6 Quad imx_v6_v7_defconfig multi-wandboard : multi_v7_defconfig Last entries of failed logs below: ======================================================================== Board bbb failure log: ------------------------------------------------- Environment size: 4203/131068 bytes U-Boot# setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp' setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp' U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp U-Boot# tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.10.17-54-g0efdef4/uImage.omap tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.10.17-54-g0efdef4/uImage.omap link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.4; our IP address is 172.16.1.108 Filename '/srv/tftp/queue/v3.10.17-54-g0efdef4/uImage.omap'. Load address: 0x80000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ###### 625 KiB/s done Bytes transferred = 4019376 (3d54b0 hex) U-Boot# tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.17-54-g0efdef4/am335x-boneblack.dtb tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.17-54-g0efdef4/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.4; our IP address is 172.16.1.108 Filename '/srv/tftp/queue/v3.10.17-54-g0efdef4/am335x-boneblack.dtb'. Load address: 0x81000000 Loading: * TFTP error: 'File not found' (1) Not retrying... U-Boot# ~$off ======================================================================== Board cubie2 failure log: ------------------------------------------------- netmask=255.255.255.0 panicarg=panic=10 partition=0:1 scriptaddr=0x44000000 serverip=172.16.1.4 setargs=if test -z \\"$root\\"; then if test \\"$bootpath\\" = "boot/"; then root="/dev/mmcblk0p1 rootwait"; else root="/dev/mmcblk0p2 rootwait"; fi; fi; setenv bootargs console=${console} root=${root} loglevel=${loglevel} ${panicarg} ${extraargs} stderr=serial stdin=serial stdout=serial Environment size: 2099/131068 bytes sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.10.17-54-g0efdef4/uImage.multi-1g tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.10.17-54-g0efdef4/uImage.multi-1g Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.154 Filename '/srv/tftp/queue/v3.10.17-54-g0efdef4/uImage.multi-1g'. Load address: 0x41000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 2.7 MiB/s done Bytes transferred = 1819976 (1bc548 hex) sun7i# tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.10.17-54-g0efdef4/sun7i-a20-cubieboard2.dtb tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.10.17-54-g0efdef4/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.154 Filename '/srv/tftp/queue/v3.10.17-54-g0efdef4/sun7i-a20-cubieboard2.dtb'. Load address: 0x42000000 Loading: * TFTP error: 'File not found' (1) Not retrying... sun7i# node: cubie2 status: on ~$off ======================================================================== Board cubie failure log: ------------------------------------------------- io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver ipmi message handler version 39.2 IPMI System Interface driver. ipmi_si: Adding default-specified kcs state machine ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca2-0000000000000ca2> Trying to free nonexistent resource <0000000000000ca3-0000000000000ca3> ipmi_si: Adding default-specified smic state machine ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca9-0000000000000ca9> Trying to free nonexistent resource <0000000000000caa-0000000000000caa> Trying to free nonexistent resource <0000000000000cab-0000000000000cab> ipmi_si: Adding default-specified bt state machine ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <00000000000000e4-00000000000000e4> Trying to free nonexistent resource <00000000000000e5-00000000000000e5> Trying to free nonexistent resource <00000000000000e6-00000000000000e6> ipmi_si: Unable to find any System Interface(s) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 17) is a U6_16550A console [ttyS0] enabled usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 Registering SWP/SWPB emulation handler ../../drivers/rtc/hctosys.c: unable to open rtc device (rtc0) List of all partitions: No filesystem could mount root, tried: Kernel panic - not syncing: VFS: Unable ~$off ======================================================================== Board multi-beaver failure log: ------------------------------------------------- Using asx0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.175 Filename '/srv/tftp/queue/v3.10.17-54-g0efdef4/uImage.multi-2g'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 1.9 MiB/s done Bytes transferred = 1819976 (1bc548 hex) Tegra30 (Beaver) # tftpboot 0x83000000 172.16.1.4:/srv/tftp/queue/v3.10.17-54-g0efdef4/tegra30-beaver.dtb tftpboot 0x83000000 172.16.1.4:/srv/tftp/queue/v3.10.17-54-g0efdef4/tegra30-beaver.dtb Using asx0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.175 Filename '/srv/tftp/queue/v3.10.17-54-g0efdef4/tegra30-beaver.dtb'. Load address: 0x83000000 Loading: *#### 1.3 MiB/s done Bytes transferred = 16546 (40a2 hex) Tegra30 (Beaver) # bootm 0x82000000 - 0x83000000 bootm 0x82000000 - 0x83000000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1819912 Bytes = 1.7 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Kernel Image ... OK Loading Device Tree to 8fff8000, end 8ffff0a1 ... OK Starting kernel ... ~$off ======================================================================== Board multi-panda failure log: ------------------------------------------------- TFTP from server 172.16.1.4; our IP address is 172.16.1.182 Filename '/srv/tftp/queue/v3.10.17-54-g0efdef4/uImage.multi-2g'. Load address: 0x80000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### done Bytes transferred = 1819976 (1bc548 hex) Panda # tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.17-54-g0efdef4/omap4-panda-es.dtb tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.17-54-g0efdef4/omap4-panda-es.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.182 Filename '/srv/tftp/queue/v3.10.17-54-g0efdef4/omap4-panda-es.dtb'. Load address: 0x81000000 Loading: *#### done Bytes transferred = 17271 (4377 hex) Panda # bootm 0x80000000 - 0x81000000 bootm 0x80000000 - 0x81000000 ## Booting kernel from Legacy Image at 80000000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1819912 Bytes = 1.7 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 81000000 Booting using the fdt blob at 0x81000000 Loading Kernel Image ... OK OK reserving fdt memory region: addr=9d000000 size=3000000 Using Device Tree in place at 81000000, end 81007376 Starting kernel ... ~$off ======================================================================== Board multi-snowball failure log: ------------------------------------------------- ipaddr=172.16.1.122 serverip=172.16.1.7 bootfile=queue/v3.10.17-54-g0efdef4/uImage.multi-snowball autoboot=no Environment size: 1706/4092 bytes U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.10.17-54-g0efdef4/uImage.multi-snowball tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.10.17-54-g0efdef4/uImage.multi-snowball smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.122 Filename '/srv/tftp/queue/v3.10.17-54-g0efdef4/uImage.multi-snowball'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### done Bytes transferred = 1819976 (1bc548 hex) U8500 $ bootm 0x100000 bootm 0x100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1819912 Bytes = 1.7 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off ======================================================================== Board multi-trimslice failure log: ------------------------------------------------- *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.135 TrimSlice # setenv bootfile queue/v3.10.17-54-g0efdef4/uImage.multi-trimslice setenv bootfile queue/v3.10.17-54-g0efdef4/uImage.multi-trimslice TrimSlice # setenv autoboot no setenv autoboot no TrimSlice # printenv printenv bootdelay=5 baudrate=115200 loadaddr=0x408000 stdin=serial,usbkbd stdout=serial,lcd stderr=serial,lcd console=ttyS0,115200n8 ethact=RTL8169#0 gateway=172.16.1.1 bootcmd=none bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw autoload=no netmask=255.255.255.0 ipaddr=172.16.1.135 serverip=172.16.1.7 bootfile=queue/v3.10.17-54-g0efdef4/uImage.multi-trimslice autoboot=no Environment size: 376/65532 bytes TrimSlice # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw TrimSlice # tftpboot 0x800000 172.16.1.4:/srv/tftp/queue/v3.10.17-54-g0efdef4/uImage.multi-trimslice tftpboot 0x800000 172.16.1.4:/srv/tftp/queue/v3.10.17-54-g0efdef4/uImage.multi-trimslice Using RTL8169#0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.135 Filename '/srv/tftp/queue/v3.10.17-54-g0efdef4/uImage.multi-trimslice'. Load address: 0x800000 Loading: * TFTP error: 'File not found' (1) Not retrying... TrimSlice # ~$off ======================================================================== Board multi-wandboard failure log: ------------------------------------------------- mmcrootfstype=ext4 rootwait netargs=setenv bootargs console=${console},${baudrate} root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp netboot=echo Booting from net ...; run netargs; if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; ${get_cmd} zImage; if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if ${get_cmd} ${fdt_addr} ${fdt_file}; then bootz ${loadaddr} - ${fdt_addr}; else if test ${boot_fdt} = try; then bootz ${loadaddr}; else echo WARN: Cannot load the DT; fi; fi; else bootz ${loadaddr}; fi; netmask=255.255.255.0 script=boot.scr serverip=172.16.1.7 uimage=uImage update_sd_firmware=if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; if mmc dev ${mmcdev}; then if ${get_cmd} ${update_sd_firmware_filename}; then setexpr fw_sz ${filesize} / 0x200; setexpr fw_sz ${fw_sz} + 1; mmc write ${loadaddr} 0x2 ${fw_sz}; fi; fi update_sd_firmware_filename=u-boot.imx Environment size: 2719/8188 bytes => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.10.17-54-g0efdef4/uImage.multi-256m tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.10.17-54-g0efdef4/uImage.multi-256m Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.155 Filename '/srv/tftp/queue/v3.10.17-54-g0efdef4/uImage.multi-256m'. Load address: 0x12000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 3.7 MiB/s done Bytes transferred = 1819976 (1bc548 hex) => tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.10.17-54-g0efdef4/imx6q-wandboard.dtb tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.10.17-54-g0efdef4/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.155 Filename '/srv/tftp/queue/v3.10.17-54-g0efdef4/imx6q-wandboard.dtb'. Load address: 0x14000000 Loading: * TFTP error: 'File not found' (1) Not retrying... => node: wandboard status: on ~$off ======================================================================== Board snowball failure log: ------------------------------------------------- collisions:0 txqueuelen:1000 RX bytes:5468 (5.3 KiB) TX bytes:4364 (4.2 KiB) Interrupt:50 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) root@snowball:~# halt halt Broadcast message from root@snowball (ttyAMA2) (Sat Nov 2 04:19:30 2013): The system is going down for system halt NOW! INIT: Switching to runlevel: 0 INIT: Sending processes the TERM signal [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel 0. [....] Stopping web server: apache2 ... waiting [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Asking all remaining processes to terminate...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] All processes ended within 1 seconds...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Stopping enhanced syslogd: rsyslogd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Deconfiguring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0/08:00:08:1e:0f:44 Sending on LPF/eth0/08:00:08:1e:0f:44 Sending on Socket/fallback DHCPRELEASE on eth0 to 172.16.1.1 port 67 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [[36minfo[39;49m] Saving the system clock. [[36minfo[39;49m] Hardware Clock updated to Sat Nov 2 04:19:36 UTC 2013. [....] Deactivating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. EXT4-fs (mmcblk0p4): re-mounted. Opts: (null) [[36minfo[39;49m] Will now halt. Power~$off ======================================================================== Board wandboard failure log: ------------------------------------------------- uimage=uImage update_sd_firmware=if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; if mmc dev ${mmcdev}; then if ${get_cmd} ${update_sd_firmware_filename}; then setexpr fw_sz ${filesize} / 0x200; setexpr fw_sz ${fw_sz} + 1; mmc write ${loadaddr} 0x2 ${fw_sz}; fi; fi update_sd_firmware_filename=u-boot.imx Environment size: 2712/8188 bytes => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.10.17-54-g0efdef4/uImage.imx tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.10.17-54-g0efdef4/uImage.imx Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.155 Filename '/srv/tftp/queue/v3.10.17-54-g0efdef4/uImage.imx'. Load address: 0x12000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########################################## 3.6 MiB/s done Bytes transferred = 4204888 (402958 hex) => tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.10.17-54-g0efdef4/imx6q-wandboard.dtb tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.10.17-54-g0efdef4/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.155 Filename '/srv/tftp/queue/v3.10.17-54-g0efdef4/imx6q-wandboard.dtb'. Load address: 0x14000000 Loading: * TFTP error: 'File not found' (1) Not retrying... => ~$off

11 years, 2 months

queue build: 11 warnings 0 failures (queue/v3.10.17-54-g0efdef4)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was queue, found at: Local queue of patches applied from http://git.kernel.org/cgit/linux/kernel/git/stable/stable-queue.git Topmost commit: 0efdef4 usb: serial: option: blacklist Olivetti Olicard200 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/queue/v3.10.17-54-g0efdef4/ Runtime: 36m 8s Passed: 121 Failed: 0 Warnings: 11 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 arch/arm/mach-pxa/em-x270.c:480:18: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 arch/arm/mach-pxa/em-x270.c:484:18: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 arch/arm/mach-pxa/em-x270.c:603:19: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 drivers/clocksource/bcm_kona_timer.c:210:199: warning: comparison of distinct pointer types lacks a cast [enabled by default] 1 drivers/gpio/gpio-omap.c:1529:13: warning: 'omap_gpio_init_context' defined but not used [-Wunused-function] 1 drivers/spi/spi-pl022.c:2226:9: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 drivers/video/backlight/max8925_bl.c:177:3: warning: statement with no effect [-Wunused-value] 4 arch/arm/mm/init.c:603:2: warning: passing argument 1 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default] 4 arch/arm/mm/init.c:603:2: warning: passing argument 2 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default] 4 arch/arm/mm/init.c:731:2: warning: passing argument 1 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default] 4 arch/arm/mm/init.c:731:2: warning: passing argument 2 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default] Section mismatches:

11 years, 2 months

queue boot: 25 pass, 0 fail (v3.11.6-66-ga5e744e)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: queue Git describe: v3.11.6-66-ga5e744e Full Report =========== omap2plus_defconfig ------------------- omap3-beagle-xm PASS: 0 min 51.2 sec am335x-bone PASS: 0 min 26.4 sec omap4-panda PASS: 1 min 10.7 sec omap4-panda-es PASS: 1 min 6.2 sec omap3-tobi,3730storm PASS: 0 min 21.3 sec omap3-tobi,3530overo PASS: 0 min 21.7 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 15.4 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 15.9 sec imx6dl-wandboard,wand-solo PASS: 0 min 15.6 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.8 sec armada-370-mirabox PASS: 0 min 20.0 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 28.9 sec multi_v7_defconfig ------------------ tegra30-beaver PASS: 0 min 16.6 sec omap3-beagle-xm PASS: 0 min 50.9 sec armada-370-mirabox PASS: 0 min 20.5 sec am335x-bone PASS: 0 min 33.6 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.9 sec sun4i-a10-cubieboard PASS: 0 min 13.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.1 sec omap4-panda PASS: 1 min 4.2 sec omap4-panda-es PASS: 1 min 3.6 sec omap3-tobi,3730storm PASS: 0 min 19.6 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.3 sec omap3-tobi,3530overo PASS: 0 min 20.1 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.2 sec

11 years, 2 months

queue boot: 10 passed 5 failed (queue/v3.11.6-66-ga5e744e)

by Olof's autobooter

arndale : passed 0:50.76 bbb : FAILED 1:14.99 beaver : passed 0:33.27 multi-beaver : passed 0:29.94 cubie2 : FAILED 0:44.09 cubie : passed 0:48.03 cubox : passed 0:48.25 panda : passed 2:49.59 multi-panda : passed 2:44.92 sama5 : passed 1:35.56 snowball : passed 1:15.61 multi-snowball : FAILED 0:52.76 multi-trimslice : passed 0:43.32 wandboard : FAILED 0:50.88 multi-wandboard : FAILED 0:41.40 Board legend: Board : System SoC Defconfig arndale : InSignal ArndaleBoard Samsung Exynos 5250 exynos_defconfig bbb : BeagleBone Black TI Sitara AM3359 omap2plus_defconfig beaver : Nvidia Beaver Nvidia Tegra 30 tegra_defconfig multi-beaver : multi_v7_defconfig cubie : Cubieboard Allwinner A10 multi_v7_defconfig cubie2 : Cubieboard 2 Allwinner A20 multi_v7_defconfig cubox : SolidRun Cubox Marvell 88AP510 dove_defconfig multi-trimslice : CompuLab TrimSlice Nvidia Tegra 20 multi_v7_defconfig panda : TI PandaBoard ES TI OMAP4460 omap2plus_defconfig multi-panda : multi_v7_defconfig sama5 : Atmel SAMA5 devboard Atmel SAMA5D35 sama5_defconfig snowball : CALAO Snowball ST-Ericsson A9500 u8500_defconfig multi-snowball : multi_v7_defconfig wandboard : Wandboard Freescale i.MX6 Quad imx_v6_v7_defconfig multi-wandboard : multi_v7_defconfig Last entries of failed logs below: ======================================================================== Board bbb failure log: ------------------------------------------------- Environment size: 4202/131068 bytes U-Boot# setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp' setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp' U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp U-Boot# tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.11.6-66-ga5e744e/uImage.omap tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.11.6-66-ga5e744e/uImage.omap link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.4; our IP address is 172.16.1.108 Filename '/srv/tftp/queue/v3.11.6-66-ga5e744e/uImage.omap'. Load address: 0x80000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# #################### 625 KiB/s done Bytes transferred = 4090896 (3e6c10 hex) U-Boot# tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.11.6-66-ga5e744e/am335x-boneblack.dtb tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.11.6-66-ga5e744e/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.4; our IP address is 172.16.1.108 Filename '/srv/tftp/queue/v3.11.6-66-ga5e744e/am335x-boneblack.dtb'. Load address: 0x81000000 Loading: * TFTP error: 'File not found' (1) Not retrying... U-Boot# ~$off ======================================================================== Board cubie2 failure log: ------------------------------------------------- setargs=if test -z \\"$root\\"; then if test \\"$bootpath\\" = "boot/"; then root="/dev/mmcblk0p1 rootwait"; else root="/dev/mmcblk0p2 rootwait"; fi; fi; setenv bootargs console=${console} root=${root} loglevel=${loglevel} ${panicarg} ${extraargs} stderr=serial stdin=serial stdout=serial Environment size: 2098/131068 bytes sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.11.6-66-ga5e744e/uImage.multi-1g tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.11.6-66-ga5e744e/uImage.multi-1g Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.154 Filename '/srv/tftp/queue/v3.11.6-66-ga5e744e/uImage.multi-1g'. Load address: 0x41000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 2.7 MiB/s done Bytes transferred = 3598392 (36e838 hex) sun7i# tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.11.6-66-ga5e744e/sun7i-a20-cubieboard2.dtb tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.11.6-66-ga5e744e/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.154 Filename '/srv/tftp/queue/v3.11.6-66-ga5e744e/sun7i-a20-cubieboard2.dtb'. Load address: 0x42000000 Loading: * TFTP error: 'File not found' (1) Not retrying... sun7i# node: cubie2 status: on ~$off ======================================================================== Board multi-snowball failure log: ------------------------------------------------- Environment size: 1705/4092 bytes U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.11.6-66-ga5e744e/uImage.multi-snowball tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.11.6-66-ga5e744e/uImage.multi-snowball smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.122 Filename '/srv/tftp/queue/v3.11.6-66-ga5e744e/uImage.multi-snowball'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ###########################T ############################## done Bytes transferred = 3615114 (37298a hex) U8500 $ bootm 0x100000 bootm 0x100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3615050 Bytes = 3.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off ======================================================================== Board multi-wandboard failure log: ------------------------------------------------- script=boot.scr serverip=172.16.1.7 uimage=uImage update_sd_firmware=if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; if mmc dev ${mmcdev}; then if ${get_cmd} ${update_sd_firmware_filename}; then setexpr fw_sz ${filesize} / 0x200; setexpr fw_sz ${fw_sz} + 1; mmc write ${loadaddr} 0x2 ${fw_sz}; fi; fi update_sd_firmware_filename=u-boot.imx Environment size: 2718/8188 bytes => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.11.6-66-ga5e744e/uImage.multi-256m tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.11.6-66-ga5e744e/uImage.multi-256m Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.155 Filename '/srv/tftp/queue/v3.11.6-66-ga5e744e/uImage.multi-256m'. Load address: 0x12000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 3.7 MiB/s done Bytes transferred = 3598392 (36e838 hex) => tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.11.6-66-ga5e744e/imx6q-wandboard.dtb tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.11.6-66-ga5e744e/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.155 Filename '/srv/tftp/queue/v3.11.6-66-ga5e744e/imx6q-wandboard.dtb'. Load address: 0x14000000 Loading: * TFTP error: 'File not found' (1) Not retrying... => ~$off ======================================================================== Board wandboard failure log: ------------------------------------------------- uimage=uImage update_sd_firmware=if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; if mmc dev ${mmcdev}; then if ${get_cmd} ${update_sd_firmware_filename}; then setexpr fw_sz ${filesize} / 0x200; setexpr fw_sz ${fw_sz} + 1; mmc write ${loadaddr} 0x2 ${fw_sz}; fi; fi update_sd_firmware_filename=u-boot.imx Environment size: 2711/8188 bytes => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.11.6-66-ga5e744e/uImage.imx tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.11.6-66-ga5e744e/uImage.imx Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.155 Filename '/srv/tftp/queue/v3.11.6-66-ga5e744e/uImage.imx'. Load address: 0x12000000 Loading: *################################################################# ################################################################# #######################################################T ########## ################################################################# ################################################################# ################################################################# ###############T ################################################## ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################################# 377 KiB/s done Bytes transferred = 4304136 (41ad08 hex) => tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.11.6-66-ga5e744e/imx6q-wandboard.dtb tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.11.6-66-ga5e744e/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.155 Filename '/srv/tftp/queue/v3.11.6-66-ga5e744e/imx6q-wandboard.dtb'. Load address: 0x14000000 Loading: * TFTP error: 'File not found' (1) Not retrying... => ~$off

11 years, 2 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports November 2013