Kernel-build-reports December 2013

kernel-build-reports@lists.linaro.org

9 participants
414 discussions

next boot: 27 pass, 5 fail (next-20131224)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: next Git describe: next-20131224 Failed boot tests (console logs at the end) =========================================== am335x-boneblack: FAIL: multi_v7_defconfig omap3-beagle-xm: FAIL: multi_v7_defconfig am335x-bone: FAIL: multi_v7_defconfig omap3-tobi,3730storm: FAIL: multi_v7_defconfig omap3-tobi,3530overo: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 28.0 sec omap3-beagle-xm PASS: 0 min 58.9 sec am335x-bone PASS: 0 min 26.8 sec omap4-panda PASS: 1 min 1.5 sec omap4-panda-es PASS: 1 min 1.3 sec omap3-tobi,3730storm PASS: 0 min 24.7 sec omap3-tobi,3530overo PASS: 0 min 22.9 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.3 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.3 sec imx6q-wandboard PASS: 0 min 16.8 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 15.3 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 22.2 sec armada-370-mirabox PASS: 0 min 20.1 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.8 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 19.9 sec tegra30-beaver PASS: 0 min 18.9 sec am335x-boneblack FAIL: 0 min 30.6 sec omap3-beagle-xm FAIL: 0 min 50.5 sec sun7i-a20-cubieboard2 PASS: 0 min 13.5 sec armada-370-mirabox PASS: 0 min 21.2 sec omap4-panda PASS: 0 min 51.2 sec omap4-panda-es PASS: 0 min 48.9 sec armada-xp-openblocks-ax3-4 PASS: 0 min 23.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.2 sec am335x-bone FAIL: 0 min 29.3 sec imx6q-wandboard PASS: 0 min 16.4 sec omap3-tobi,3730storm FAIL: 0 min 28.3 sec imx6dl-wandboard,wand-dual PASS: 0 min 17.4 sec omap3-tobi,3530overo FAIL: 0 min 30.1 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 31.2 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.6 sec Console logs for failures ========================= multi_v7_defconfig ------------------ am335x-boneblack: FAIL: last 24 lines of boot log: -------------------------------------------------- done Bytes transferred = 17911 (45f7 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.176:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U-Boot#bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 9f19b000, end 9f237300 ... OK Using Device Tree in place at 81f00000, end 81f075f6 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 30.59 seconds. # PYBOOT: Result: FAIL omap3-beagle-xm: FAIL: last 24 lines of boot log: ------------------------------------------------- done Bytes transferred = 15577 (3cd9 hex) OMAP3 beagleboard.org # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none OMAP3 beagleboard.org # bootz ${loadaddr} 0x81000000 0x81f00000 bootz ${loadaddr} 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8ff63000, end 8ffff300 ... OK Loading Device Tree to 8ff5c000, end 8ff62cd8 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 50.53 seconds. # PYBOOT: Result: FAIL am335x-bone: FAIL: last 24 lines of boot log: --------------------------------------------- done Bytes transferred = 17315 (43a3 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.174:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U-Boot# bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8f19b000, end 8f237300 ... OK Using Device Tree in place at 81f00000, end 81f073a2 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 29.28 seconds. # PYBOOT: Result: FAIL omap3-tobi,3730storm: FAIL: last 24 lines of boot log: ------------------------------------------------------ smc911x: MAC 00:15:c9:28:f0:11 Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'tmp/3730storm-xWVXrf/omap3-tobi.dtb'. Load address: 0x81f00000 Loading: *## 2.1 MiB/s done Bytes transferred = 15191 (3b57 hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo #bootz ${loadaddr} - 0x81f00000 bootz ${loadaddr} - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Device Tree to 8fff9000, end 8ffffb56 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 28.29 seconds. # PYBOOT: Result: FAIL omap3-tobi,3530overo: FAIL: last 24 lines of boot log: ------------------------------------------------------ done Bytes transferred = 15191 (3b57 hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk debug rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.151:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo # bootz ${loadaddr} 0x81000000 0x81f00000 bootz ${loadaddr} 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8ff63000, end 8ffff300 ... OK Loading Device Tree to 8ff5c000, end 8ff62b56 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 30.14 seconds. # PYBOOT: Result: FAIL

10 years, 12 months

next boot: 28 passed 3 failed (next/next-20131224)

by Olof's autobooter

Failed boards: bbb multi_v7_defconfig : FAILED 1:19.50 hummingboard multi_v7_defconfig : FAILED 0:25.50 panda multi_v7_defconfig : FAILED 1:33.77 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:14.39 arndale exynos_defconfig : passed 1:08.19 bbb omap2plus_defconfig : passed 1:37.09 beaver tegra_defconfig : passed 0:54.77 beaver multi_v7_defconfig : warnings 0:49.58 capri bcm_defconfig : passed 0:44.43 capri multi_v7_defconfig : passed 0:43.68 cubie sunxi_defconfig : passed 0:52.86 cubie multi_v7_defconfig : passed 0:58.63 cubie2 sunxi_defconfig : passed 0:50.24 cubie2 multi_v7_defconfig : warnings 0:58.13 cubie2 multi_lpae_defconfig : warnings 0:50.72 cubox dove_defconfig : passed 1:03.66 dalmore tegra_defconfig : passed 1:25.99 dalmore multi_v7_defconfig : warnings 1:18.90 dalmore multi_lpae_defconfig : warnings 1:22.81 hummingboard imx_v6_v7_defconfig : passed 1:16.35 panda omap2plus_defconfig : passed 1:15.49 sama5 sama5_defconfig : passed 1:53.31 seaboard tegra_defconfig : passed 1:03.96 seaboard multi_v7_defconfig : warnings 1:09.47 snow exynos_defconfig : passed 1:19.38 snowball u8500_defconfig : passed 1:21.61 snowball multi_v7_defconfig : passed 2:09.61 trimslice tegra_defconfig : passed 0:58.66 trimslice multi_v7_defconfig : warnings 0:57.08 wandboard imx_v6_v7_defconfig : passed 0:56.75 wandboard multi_v7_defconfig : warnings 1:11.80 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board bbb-multi_v7_defconfig failure log: ------------------------------------------------- Using cpsw device TFTP from server 172.16.1.3; our IP address is 172.16.1.112 Filename 'next/next-20131224/multi_v7_defconfig/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################### 1.2 MiB/s done Bytes transferred = 4202112 (401e80 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x81f00000 next/next-20131224/multi_v7_defconfig/dtbs/am335x-boneblack.dtb tftp 0x81f00000 next/next-20131224/multi_v7_defconfig/dtbs/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.3; our IP address is 172.16.1.112 Filename 'next/next-20131224/multi_v7_defconfig/dtbs/am335x-boneblack.dtb'. Load address: 0x81f00000 Loading: *## 1 MiB/s done Bytes transferred = 17911 (45f7 hex) U-Boot# setenv bootargs console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk setenv bootargs console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk U-Boot# bootz 0x80200000 - 0x81f00000 bootz 0x80200000 - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f075f6 Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board hummingboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.084154] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 1.090196] hub 1-0:1.0: USB hub found [ 1.093979] hub 1-0:1.0: 1 port detected [ 1.098501] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.103570] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.108492] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 1.134151] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.140144] hub 2-0:1.0: USB hub found [ 1.143925] hub 2-0:1.0: 1 port detected [ 1.148457] mousedev: PS/2 mouse device common for all mice [ 1.155428] i2c /dev entries driver [ 1.159887] sdhci: Secure Digital Host Controller Interface driver [ 1.166095] sdhci: Copyright(c) Pierre Ossman [ 1.170834] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.177014] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode [ 1.186189] mmc0: no vqmmc regulator found [ 1.234144] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 1.242033] usbcore: registered new interface driver usbhid [ 1.247638] usbhid: USB HID core driver [ 1.256409] TCP: cubic registered [ 1.259739] NET: Registered protocol family 17 [ 1.264372] Key type dns_resolver registered [ 1.269513] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.277816] spear_cpufreq: Invalid cpufreq_tbl [ 1.282248] ALSA device list: [ 1.285425] No soundcards found. [ 1.289334] VFS: Cannot open root device "mmcblk0p2" or unknown-block(0,0): error -6 [ 1.297101] Please append a correct "root=" boot option; here are the available partitions: [ 1.305471] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 1.313743] CPU: 0 PID: 1 Comm: swapper Tainted: G W 3.13.0-rc5-next-20131224 #1 [ 1.322037] [<c0013c50>] (unwind_backtrace) from [<c0010f0c>] (show_stack+0x10/0x14) [ 1.329794] [<c0010f0c>] (show_stack) from [<c05373a4>] (panic+0x8c/0x1d8) [ 1.336687] [<c05373a4>] (panic) from [<c07aaf74>] (mount_block_root+0x1a0/0x230) [ 1.344180] [<c07aaf74>] (mount_block_root) from [<c07ab10c>] (mount_root+0x108/0x110) [ 1.352105] [<c07ab10c>] (mount_root) from [<c07ab26c>] (prepare_namespace+0x158/0x1a0) [ 1.360121] [<c07ab26c>] (prepare_namespace) from [<c07aac30>] (kernel_init_freeable+0x1b4/0x1c4) [ 1.369009] [<c07aac30>] (kernel_init_freeable) from [<c0535068>] (kernel_init+0x8/0x120) [ 1.377197] [<c0535068>] (kernel_init) from [<c000e3d8>] (ret_from_fork+0x14/0x3c) ~$off # PYBOOT: Exception: panic ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.040679] platform 48072000.i2c: Driver omap_i2c requests probe deferral [ 2.048095] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c3_pins, deferring probe [ 2.059570] platform 48060000.i2c: Driver omap_i2c requests probe deferral [ 2.066833] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c4_pins, deferring probe [ 2.078430] platform 48350000.i2c: Driver omap_i2c requests probe deferral [ 2.085998] omap-dma-engine 4a056000.dma-controller: allocating channel for 62 [ 2.085998] omap-dma-engine 4a056000.dma-controller: allocating channel for 61 [ 2.101226] omap_hsmmc 4809c000.mmc: vmmc regulator missing [ 2.107086] omap-dma-engine 4a056000.dma-controller: freeing channel for 61 [ 2.114379] omap-dma-engine 4a056000.dma-controller: freeing channel for 62 [ 2.121673] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.129119] omap_hsmmc 480d5000.mmc: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_pins, deferring probe [ 2.141113] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 2.148559] leds-gpio leds.6: could not find pctldev for node /ocp/pinmux@4a100040/gpio_led_pmx, deferring probe [ 2.159362] platform leds.6: Driver leds-gpio requests probe deferral [ 2.412353] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.547973] smsc95xx v1.0.4 [ 2.612487] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, ba:2a:7f:2d:e1:1e [ 2.624603] reg-fixed-voltage wl12xx_vmmc.10: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_gpio, deferring probe [ 2.637359] platform wl12xx_vmmc.10: Driver reg-fixed-voltage requests probe deferral [ 2.645660] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c1_pins, deferring probe [ 2.657348] platform 48070000.i2c: Driver omap_i2c requests probe deferral [ 2.664611] omap_i2c 48072000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c2_pins, deferring probe [ 2.676239] platform 48072000.i2c: Driver omap_i2c requests probe deferral [ 2.683624] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c3_pins, deferring probe [ 2.695098] platform 48060000.i2c: Driver omap_i2c requests probe deferral [ 2.702484] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c4_pins, deferring probe [ 2.713958] platform 48350000.i2c: Driver omap_i2c requests probe deferral [ 2.721527] omap-dma-engine 4a056000.dma-controller: allocating channel for 62 [ 2.729156] omap-dma-engine 4a056000.dma-controller: allocating channel for 61 [ 2.736755] omap_hsmmc 4809c000.mmc: vmmc regulator missing [ 2.742584] omap-dma-engine 4a056000.dma-controller: freeing channel for 61 [ 2.749877] omap-dma-engine 4a056000.dma-controller: freeing channel for 62 [ 2.757202] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.764801] omap_hsmmc 480d5000.mmc: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_pins, deferring probe [ 2.776641] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 2.776672] leds-gpio leds.6: could not find pctldev for node /ocp/pinmux@4a100040/gpio_led_pmx, deferring probe [ 2.794860] platform leds.6: Driver leds-gpio requests probe deferral ~$off # PYBOOT: Exception: timeout

10 years, 12 months

next build: 48 warnings 4 failures (next/next-20131224)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next, found at: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch) Topmost commit: 1ba337c Add linux-next specific files for 20131224 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next/next-20131224/ Runtime: 39m 14s Passed: 118 Failed: 4 Warnings: 48 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: at91x40_defconfig efm32_defconfig mini2440_defconfig s3c2410_defconfig ------------------------------------------------------------------------------- Errors: at91x40_defconfig: kernel/built-in.o:(.data+0x4b8): undefined reference to `overcommit_ratio_handler' kernel/built-in.o:(.data+0x4dc): undefined reference to `overcommit_kbytes_handler' efm32_defconfig: kernel/built-in.o:(.data+0x498): undefined reference to `overcommit_ratio_handler' kernel/built-in.o:(.data+0x4bc): undefined reference to `overcommit_kbytes_handler' mini2440_defconfig: drivers/leds/leds-s3c24xx.c:100:2: error: implicit declaration of function 's3c_gpio_setpull' [-Werror=implicit-function-declaration] drivers/leds/leds-s3c24xx.c:100:32: error: 'S3C_GPIO_PULL_NONE' undeclared (first use in this function) s3c2410_defconfig: arch/arm/mach-s3c24xx/mach-osiris-dvs.c:76:4: error: implicit declaration of function 'S3C2410_GPB' [-Werror=implicit-function-declaration] drivers/leds/leds-s3c24xx.c:100:2: error: implicit declaration of function 's3c_gpio_setpull' [-Werror=implicit-function-declaration] drivers/leds/leds-s3c24xx.c:100:32: error: 'S3C_GPIO_PULL_NONE' undeclared (first use in this function) Warnings: 1 drivers/usb/host/xhci-plat.c:203:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:211:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 arch/arm/mach-omap2/cpuidle44xx.c:101:16: warning: array subscript is above array bounds [-Warray-bounds] 2 arch/arm/mach-omap2/cpuidle44xx.c:131:15: warning: array subscript is above array bounds [-Warray-bounds] 2 arch/arm/mach-omap2/cpuidle44xx.c:132:23: warning: array subscript is above array bounds [-Warray-bounds] 2 arch/arm/mach-omap2/cpuidle44xx.c:133:19: warning: array subscript is above array bounds [-Warray-bounds] 2 arch/arm/mach-omap2/cpuidle44xx.c:207:8: warning: array subscript is above array bounds [-Warray-bounds] 2 arch/arm/mach-omap2/cpuidle44xx.c:212:11: warning: array subscript is above array bounds [-Warray-bounds] 2 arch/arm/mach-omap2/cpuidle44xx.c:91:26: warning: array subscript is above array bounds [-Warray-bounds] 2 drivers/irqchip/irq-armada-370-xp.c:62:28: warning: 'irq_controller_lock' defined but not used [-Wunused-variable] 2 net/netfilter/ipvs/ip_vs_sync.c:1640:8: warning: unused variable 'ret' [-Wunused-variable] 4 drivers/usb/gadget/at91_udc.c:1762:3: warning: passing argument 1 of 'usb_ep_set_maxpacket_limit' from incompatible pointer type [enabled by default] 4 drivers/usb/gadget/at91_udc.c:1763:3: warning: passing argument 1 of 'usb_ep_set_maxpacket_limit' from incompatible pointer type [enabled by default] 4 drivers/usb/gadget/at91_udc.c:1764:3: warning: passing argument 1 of 'usb_ep_set_maxpacket_limit' from incompatible pointer type [enabled by default] 4 drivers/usb/gadget/at91_udc.c:1765:3: warning: passing argument 1 of 'usb_ep_set_maxpacket_limit' from incompatible pointer type [enabled by default] 4 drivers/usb/gadget/at91_udc.c:1767:3: warning: passing argument 1 of 'usb_ep_set_maxpacket_limit' from incompatible pointer type [enabled by default] 4 drivers/usb/gadget/at91_udc.c:1769:3: warning: passing argument 1 of 'usb_ep_set_maxpacket_limit' from incompatible pointer type [enabled by default] 4 drivers/usb/gadget/at91_udc.c:1770:3: warning: passing argument 1 of 'usb_ep_set_maxpacket_limit' from incompatible pointer type [enabled by default] Section mismatches:

10 years, 12 months

arm-soc boot: 27 pass, 5 fail (v3.13-rc4-521-gb7b1314)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: arm-soc Git describe: v3.13-rc4-521-gb7b1314 Failed boot tests (console logs at the end) =========================================== am335x-boneblack: FAIL: multi_v7_defconfig omap3-beagle-xm: FAIL: multi_v7_defconfig am335x-bone: FAIL: multi_v7_defconfig omap3-tobi,3730storm: FAIL: multi_v7_defconfig omap3-tobi,3530overo: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 27.8 sec omap3-beagle-xm PASS: 0 min 59.4 sec am335x-bone PASS: 0 min 26.6 sec omap4-panda PASS: 1 min 4.2 sec omap4-panda-es PASS: 1 min 14.0 sec omap3-tobi,3730storm PASS: 0 min 24.3 sec omap3-tobi,3530overo PASS: 0 min 21.7 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.1 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.3 sec imx6q-wandboard PASS: 0 min 15.3 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 12.1 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 22.0 sec armada-370-mirabox PASS: 0 min 20.2 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.9 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 17.3 sec tegra30-beaver PASS: 0 min 19.1 sec am335x-boneblack FAIL: 0 min 30.4 sec omap3-beagle-xm FAIL: 0 min 54.4 sec sun7i-a20-cubieboard2 PASS: 0 min 13.4 sec armada-370-mirabox PASS: 0 min 21.1 sec omap4-panda PASS: 0 min 54.2 sec omap4-panda-es PASS: 0 min 53.4 sec armada-xp-openblocks-ax3-4 PASS: 0 min 23.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.1 sec am335x-bone FAIL: 0 min 29.3 sec imx6q-wandboard PASS: 0 min 16.5 sec omap3-tobi,3730storm FAIL: 0 min 28.3 sec imx6dl-wandboard,wand-dual PASS: 0 min 17.2 sec omap3-tobi,3530overo FAIL: 0 min 27.1 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 27.9 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.3 sec Console logs for failures ========================= multi_v7_defconfig ------------------ am335x-boneblack: FAIL: last 24 lines of boot log: -------------------------------------------------- done Bytes transferred = 17911 (45f7 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.176:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U-Boot# bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 9f19b000, end 9f237300 ... OK Using Device Tree in place at 81f00000, end 81f075f6 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 30.44 seconds. # PYBOOT: Result: FAIL omap3-beagle-xm: FAIL: last 24 lines of boot log: ------------------------------------------------- done Bytes transferred = 15577 (3cd9 hex) OMAP3 beagleboard.org # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none OMAP3 beagleboard.org # bootz ${loadaddr} 0x81000000 0x81f00000 bootz ${loadaddr} 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8ff63000, end 8ffff300 ... OK Loading Device Tree to 8ff5c000, end 8ff62cd8 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 54.38 seconds. # PYBOOT: Result: FAIL am335x-bone: FAIL: last 24 lines of boot log: --------------------------------------------- done Bytes transferred = 17315 (43a3 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.174:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U-Boot# bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8f19b000, end 8f237300 ... OK Using Device Tree in place at 81f00000, end 81f073a2 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 29.29 seconds. # PYBOOT: Result: FAIL omap3-tobi,3730storm: FAIL: last 24 lines of boot log: ------------------------------------------------------ smc911x: MAC 00:15:c9:28:f0:11 Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'tmp/3730storm-sKwhZR/omap3-tobi.dtb'. Load address: 0x81f00000 Loading: *## 2.1 MiB/s done Bytes transferred = 15191 (3b57 hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo # bootz ${loadaddr} - 0x81f00000 bootz ${loadaddr} - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Device Tree to 8fff9000, end 8ffffb56 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 28.27 seconds. # PYBOOT: Result: FAIL omap3-tobi,3530overo: FAIL: last 24 lines of boot log: ------------------------------------------------------ done Bytes transferred = 15191 (3b57 hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk debug rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.151:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo # bootz ${loadaddr} 0x81000000 0x81f00000 bootz ${loadaddr} 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8ff63000, end 8ffff300 ... OK Loading Device Tree to 8ff5c000, end 8ff62b56 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 27.08 seconds. # PYBOOT: Result: FAIL

10 years, 12 months

arm-soc boot: 27 passed 2 failed (arm-soc/v3.13-rc4-521-gb7b1314)

by Olof's autobooter

Failed boards: bbb multi_v7_defconfig : FAILED 1:22.38 panda multi_v7_defconfig : FAILED 1:35.34 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:15.07 arndale exynos_defconfig : passed 1:45.47 bbb omap2plus_defconfig : passed 1:34.85 beaver tegra_defconfig : passed 0:53.87 beaver multi_v7_defconfig : warnings 0:48.46 capri bcm_defconfig : passed 0:43.36 capri multi_v7_defconfig : passed 0:44.09 cubie sunxi_defconfig : passed 0:53.40 cubie multi_v7_defconfig : passed 0:57.79 cubie2 sunxi_defconfig : passed 0:50.76 cubie2 multi_v7_defconfig : warnings 0:57.25 cubie2 multi_lpae_defconfig : warnings 0:50.77 cubox dove_defconfig : warnings 1:06.66 dalmore tegra_defconfig : passed 1:21.81 dalmore multi_v7_defconfig : warnings 1:23.20 dalmore multi_lpae_defconfig : warnings 1:16.48 panda omap2plus_defconfig : passed 1:14.53 sama5 sama5_defconfig : passed 1:50.93 seaboard tegra_defconfig : passed 0:59.18 seaboard multi_v7_defconfig : warnings 1:03.83 snow exynos_defconfig : passed 1:19.98 snowball u8500_defconfig : passed 1:22.81 snowball multi_v7_defconfig : passed 2:05.53 trimslice tegra_defconfig : passed 1:00.78 trimslice multi_v7_defconfig : warnings 0:56.51 wandboard imx_v6_v7_defconfig : passed 0:57.04 wandboard multi_v7_defconfig : warnings 1:11.93 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board bbb-multi_v7_defconfig failure log: ------------------------------------------------- Using cpsw device TFTP from server 172.16.1.3; our IP address is 172.16.1.112 Filename 'arm-soc/v3.13-rc4-521-gb7b1314/multi_v7_defconfig/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ####################### 1.2 MiB/s done Bytes transferred = 4152376 (3f5c38 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x81f00000 arm-soc/v3.13-rc4-521-gb7b1314/multi_v7_defconfig/dtbs/am335x-boneblack.dtb tftp 0x81f00000 arm-soc/v3.13-rc4-521-gb7b1314/multi_v7_defconfig/dtbs/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.3; our IP address is 172.16.1.112 Filename 'arm-soc/v3.13-rc4-521-gb7b1314/multi_v7_defconfig/dtbs/am335x-boneblack.dtb'. Load address: 0x81f00000 Loading: *## 545.9 KiB/s done Bytes transferred = 17911 (45f7 hex) U-Boot# setenv bootargs console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk setenv bootargs console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk U-Boot# bootz 0x80200000 - 0x81f00000 bootz 0x80200000 - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f075f6 Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.142944] platform wl12xx_vmmc.10: Driver reg-fixed-voltage requests probe deferral [ 2.151428] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c1_pins, deferring probe [ 2.163085] platform 48070000.i2c: Driver omap_i2c requests probe deferral [ 2.170562] omap_i2c 48072000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c2_pins, deferring probe [ 2.182098] platform 48072000.i2c: Driver omap_i2c requests probe deferral [ 2.189575] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c3_pins, deferring probe [ 2.201110] platform 48060000.i2c: Driver omap_i2c requests probe deferral [ 2.208587] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c4_pins, deferring probe [ 2.220123] platform 48350000.i2c: Driver omap_i2c requests probe deferral [ 2.227783] omap-dma-engine 4a056000.dma-controller: allocating channel for 62 [ 2.235473] omap-dma-engine 4a056000.dma-controller: allocating channel for 61 [ 2.243103] omap_hsmmc 4809c000.mmc: vmmc regulator missing [ 2.248962] omap-dma-engine 4a056000.dma-controller: freeing channel for 61 [ 2.256286] omap-dma-engine 4a056000.dma-controller: freeing channel for 62 [ 2.263641] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.271301] omap_hsmmc 480d5000.mmc: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_pins, deferring probe [ 2.283172] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 2.505828] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.655364] smsc95xx v1.0.4 [ 2.723449] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, fa:32:70:7c:a4:c2 [ 2.735870] reg-fixed-voltage wl12xx_vmmc.10: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_gpio, deferring probe [ 2.748596] platform wl12xx_vmmc.10: Driver reg-fixed-voltage requests probe deferral [ 2.756896] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c1_pins, deferring probe [ 2.768707] platform 48070000.i2c: Driver omap_i2c requests probe deferral [ 2.776275] omap_i2c 48072000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c2_pins, deferring probe [ 2.787811] platform 48072000.i2c: Driver omap_i2c requests probe deferral [ 2.795288] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c3_pins, deferring probe [ 2.806823] platform 48060000.i2c: Driver omap_i2c requests probe deferral [ 2.814086] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c4_pins, deferring probe [ 2.825775] platform 48350000.i2c: Driver omap_i2c requests probe deferral [ 2.833496] omap-dma-engine 4a056000.dma-controller: allocating channel for 62 [ 2.833496] omap-dma-engine 4a056000.dma-controller: allocating channel for 61 [ 2.848724] omap_hsmmc 4809c000.mmc: vmmc regulator missing [ 2.854614] omap-dma-engine 4a056000.dma-controller: freeing channel for 61 [ 2.861938] omap-dma-engine 4a056000.dma-controller: freeing channel for 62 [ 2.869262] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.876953] omap_hsmmc 480d5000.mmc: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_pins, deferring probe [ 2.888854] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral ~$off # PYBOOT: Exception: timeout

10 years, 12 months

arm-soc build: 35 warnings 0 failures (arm-soc/v3.13-rc4-521-gb7b1314)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was arm-soc, found at: http://git.kernel.org/cgit/linux/kernel/git/arm/arm-soc.git (for-next or to-build branch) Topmost commit: b7b1314 Merge branch 'next/dt' into for-next Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/arm-soc/v3.13-rc4-521-gb7b1314/ Runtime: 14m 36s Passed: 122 Failed: 0 Warnings: 35 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/leds/leds-pwm.c:88:22: warning: unused variable 'node' [-Wunused-variable] 1 drivers/net/ethernet/ti/cpsw.c:2138:2: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/net/ethernet/ti/davinci_cpdma.c:182:3: warning: passing argument 3 of 'dma_alloc_attrs' from incompatible pointer type [enabled by default] 1 drivers/net/ethernet/ti/davinci_cpdma.c:222:25: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/net/ethernet/ti/davinci_cpdma.c:223:8: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 4 has type 'resource_size_t' [-Wformat=] 1 drivers/usb/host/xhci-plat.c:201:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:209:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 arch/arm/mach-omap2/cpuidle44xx.c:101:16: warning: array subscript is above array bounds [-Warray-bounds] 2 arch/arm/mach-omap2/cpuidle44xx.c:131:15: warning: array subscript is above array bounds [-Warray-bounds] 2 arch/arm/mach-omap2/cpuidle44xx.c:132:23: warning: array subscript is above array bounds [-Warray-bounds] 2 arch/arm/mach-omap2/cpuidle44xx.c:133:19: warning: array subscript is above array bounds [-Warray-bounds] 2 arch/arm/mach-omap2/cpuidle44xx.c:207:8: warning: array subscript is above array bounds [-Warray-bounds] 2 arch/arm/mach-omap2/cpuidle44xx.c:212:11: warning: array subscript is above array bounds [-Warray-bounds] 2 arch/arm/mach-omap2/cpuidle44xx.c:91:26: warning: array subscript is above array bounds [-Warray-bounds] 2 drivers/dma/at_hdmac_regs.h:350:23: warning: 'chan2parent' defined but not used [-Wunused-function] 2 drivers/irqchip/irq-armada-370-xp.c:62:23: warning: 'irq_controller_lock' defined but not used [-Wunused-variable] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:123:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] 2 net/netfilter/ipvs/ip_vs_sync.c:1640:8: warning: unused variable 'ret' [-Wunused-variable] 4 drivers/dma/mv_xor.c:57:12: warning: 'mv_desc_get_dest_addr' defined but not used [-Wunused-function] Section mismatches:

10 years, 12 months

mainline boot: 32 pass, 0 fail (v3.13-rc5-34-gb257bab)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.13-rc5-34-gb257bab Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 27.9 sec omap3-beagle-xm PASS: 0 min 60.0 sec am335x-bone PASS: 0 min 26.6 sec omap4-panda PASS: 1 min 4.9 sec omap4-panda-es PASS: 1 min 4.4 sec omap3-tobi,3730storm PASS: 0 min 21.0 sec omap3-tobi,3530overo PASS: 0 min 21.9 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 17.0 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.3 sec imx6q-wandboard PASS: 0 min 15.4 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 15.1 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.9 sec armada-370-mirabox PASS: 0 min 20.0 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 35.9 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 28.7 sec tegra30-beaver PASS: 0 min 16.5 sec am335x-boneblack PASS: 0 min 24.7 sec omap3-beagle-xm PASS: 0 min 58.7 sec sun7i-a20-cubieboard2 PASS: 0 min 13.0 sec armada-370-mirabox PASS: 0 min 20.6 sec omap4-panda PASS: 1 min 5.1 sec omap4-panda-es PASS: 1 min 3.0 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.9 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.5 sec am335x-bone PASS: 0 min 23.4 sec imx6q-wandboard PASS: 0 min 16.8 sec omap3-tobi,3730storm PASS: 0 min 22.1 sec imx6dl-wandboard,wand-dual PASS: 0 min 17.9 sec omap3-tobi,3530overo PASS: 0 min 23.5 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 27.6 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.4 sec

10 years, 12 months

mainline boot: 29 passed 0 failed (mainline/v3.13-rc5-34-gb257bab)

by Olof's autobooter

Failed boards: Successful boards: apc vt8500_v6_v7_defconfig : passed 1:17.38 arndale exynos_defconfig : passed 1:08.91 bbb omap2plus_defconfig : passed 1:37.03 bbb multi_v7_defconfig : passed 1:15.06 beaver tegra_defconfig : passed 0:54.47 beaver multi_v7_defconfig : passed 0:40.76 capri bcm_defconfig : passed 0:42.74 capri multi_v7_defconfig : passed 0:42.24 cubie sunxi_defconfig : passed 0:53.00 cubie multi_v7_defconfig : passed 0:57.86 cubie2 sunxi_defconfig : passed 0:49.64 cubie2 multi_v7_defconfig : passed 0:58.44 cubie2 multi_lpae_defconfig : passed 0:53.44 cubox dove_defconfig : passed 1:08.32 dalmore tegra_defconfig : passed 1:24.24 dalmore multi_v7_defconfig : passed 1:04.34 dalmore multi_lpae_defconfig : passed 1:00.94 panda omap2plus_defconfig : passed 1:11.80 panda multi_v7_defconfig : passed 1:08.92 sama5 sama5_defconfig : passed 1:48.90 seaboard tegra_defconfig : passed 1:00.66 seaboard multi_v7_defconfig : passed 0:56.24 snow exynos_defconfig : passed 1:19.40 snowball u8500_defconfig : passed 1:19.75 snowball multi_v7_defconfig : passed 1:06.85 trimslice tegra_defconfig : passed 1:20.15 trimslice multi_v7_defconfig : passed 0:50.83 wandboard imx_v6_v7_defconfig : passed 0:56.60 wandboard multi_v7_defconfig : passed 0:53.15 Board legend is available at http://arm-soc.lixom.net/boards.html

10 years, 12 months

mainline build: 11 warnings 0 failures (mainline/v3.13-rc5-34-gb257bab)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: b257bab Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.13-rc5-34-gb257bab/ Runtime: 12m 39s Passed: 119 Failed: 0 Warnings: 11 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/leds/leds-pwm.c:88:22: warning: unused variable 'node' [-Wunused-variable] 1 drivers/net/ethernet/ti/cpsw.c:2138:2: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/net/ethernet/ti/davinci_cpdma.c:182:3: warning: passing argument 3 of 'dma_alloc_attrs' from incompatible pointer type [enabled by default] 1 drivers/net/ethernet/ti/davinci_cpdma.c:222:25: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/net/ethernet/ti/davinci_cpdma.c:223:8: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 4 has type 'resource_size_t' [-Wformat=] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:123:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] 2 net/netfilter/ipvs/ip_vs_sync.c:1640:8: warning: unused variable 'ret' [-Wunused-variable] Section mismatches:

10 years, 12 months

arm-soc boot: 27 pass, 5 fail (v3.13-rc4-497-g27b4a02)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: arm-soc Git describe: v3.13-rc4-497-g27b4a02 Failed boot tests (console logs at the end) =========================================== am335x-boneblack: FAIL: multi_v7_defconfig omap3-beagle-xm: FAIL: multi_v7_defconfig am335x-bone: FAIL: multi_v7_defconfig omap3-tobi,3730storm: FAIL: multi_v7_defconfig omap3-tobi,3530overo: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 27.8 sec omap3-beagle-xm PASS: 1 min 1.0 sec am335x-bone PASS: 0 min 26.6 sec omap4-panda PASS: 1 min 3.5 sec omap4-panda-es PASS: 1 min 11.2 sec omap3-tobi,3730storm PASS: 0 min 24.2 sec omap3-tobi,3530overo PASS: 0 min 21.7 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.1 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.3 sec imx6q-wandboard PASS: 0 min 16.6 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 12.0 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 22.0 sec armada-370-mirabox PASS: 0 min 20.2 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.7 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 20.3 sec tegra30-beaver PASS: 0 min 19.4 sec am335x-boneblack FAIL: 0 min 30.5 sec omap3-beagle-xm FAIL: 0 min 54.1 sec sun7i-a20-cubieboard2 PASS: 0 min 13.4 sec armada-370-mirabox PASS: 0 min 21.1 sec omap4-panda PASS: 0 min 53.7 sec omap4-panda-es PASS: 0 min 53.5 sec armada-xp-openblocks-ax3-4 PASS: 0 min 23.6 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.1 sec am335x-bone FAIL: 0 min 29.3 sec imx6q-wandboard PASS: 0 min 16.3 sec omap3-tobi,3730storm FAIL: 0 min 28.2 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.2 sec omap3-tobi,3530overo FAIL: 0 min 27.0 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 27.9 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.3 sec Console logs for failures ========================= multi_v7_defconfig ------------------ am335x-boneblack: FAIL: last 24 lines of boot log: -------------------------------------------------- done Bytes transferred = 17911 (45f7 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.176:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U-Boot# bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 9f19b000, end 9f237300 ... OK Using Device Tree in place at 81f00000, end 81f075f6 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 30.50 seconds. # PYBOOT: Result: FAIL omap3-beagle-xm: FAIL: last 24 lines of boot log: ------------------------------------------------- done Bytes transferred = 15577 (3cd9 hex) OMAP3 beagleboard.org # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none OMAP3 beagleboard.org # bootz ${loadaddr} 0x81000000 0x81f00000 bootz ${loadaddr} 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8ff63000, end 8ffff300 ... OK Loading Device Tree to 8ff5c000, end 8ff62cd8 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 54.13 seconds. # PYBOOT: Result: FAIL am335x-bone: FAIL: last 24 lines of boot log: --------------------------------------------- done Bytes transferred = 17315 (43a3 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.174:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U-Boot# bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8f19b000, end 8f237300 ... OK Using Device Tree in place at 81f00000, end 81f073a2 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 29.27 seconds. # PYBOOT: Result: FAIL omap3-tobi,3730storm: FAIL: last 24 lines of boot log: ------------------------------------------------------ smc911x: MAC 00:15:c9:28:f0:11 Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'tmp/3730storm-Ckkgot/omap3-tobi.dtb'. Load address: 0x81f00000 Loading: *## 1.8 MiB/s done Bytes transferred = 15191 (3b57 hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo # bootz ${loadaddr} - 0x81f00000 bootz ${loadaddr} - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Device Tree to 8fff9000, end 8ffffb56 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 28.24 seconds. # PYBOOT: Result: FAIL omap3-tobi,3530overo: FAIL: last 24 lines of boot log: ------------------------------------------------------ done Bytes transferred = 15191 (3b57 hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk debug rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.151:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo #bootz ${loadaddr} 0x81000000 0x81f00000 bootz ${loadaddr} 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8ff63000, end 8ffff300 ... OK Loading Device Tree to 8ff5c000, end 8ff62b56 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 27.02 seconds. # PYBOOT: Result: FAIL

10 years, 12 months

← Newer
1
...
4
5
6
7
8
9
10
...
42
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports December 2013