Tree/Branch: arm-soc/to-build
Git describe: v3.11-rc5-429-g62cc3c2
Commit: 62cc3c2efc Merge branch 'next/soc' into for-next
arm-multi_v7_defconfig
----------------------
cubie PASS: 0 min 15.8 sec
4430panda PASS: 1 min 1.1 sec
arm-exynos_defconfig
--------------------
arndale FAIL: 0 min 0.0 sec
arm-omap2plus_defconfig
-----------------------
3530overo PASS: 0 min 24.7 sec
4460panda-es PASS: 1 min 19.0 sec
3730storm PASS: 0 min 24.5 sec
3730xm FAIL: 0 min 0.0 sec
3530beagle PASS: 1 min 5.0 sec
4430panda PASS: 1 min 4.0 sec
am335xboneb PASS: 0 min 27.6 sec
======================================================================
arm-exynos_defconfig
--------------------
arndale: FAIL: last 24 lines of boot log:
-----------------------------------------
U-Boot 2013.01.-rc1-dirty (Jun 28 2013 - 07:14:48) for ARNDALE5250
arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2
GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919
ARNDALE5250 # setenv initenv "'if test -n ${loadbootenv}; then if run loadbootenv; then run importbootenv; fi; fi;'"
setenv initenv "'if test -n ${loadbootenv}; then if run loadbootenv; then run importbootenv; fi; fi;'"
ARNDALE5250 # if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
ARNDALE5250 # if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
(Re)start USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
scanning usb for ethernet devices... 0 Ethernet Device(s) found
ARNDALE5250 # setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
ARNDALE5250 # dhcp
dhcp
No ethernet found.
ARNDALE5250 # ~$off
# PYBOOT: Exception: u-boot: ERROR: timed-out getting DHCP address.
# PYBOOT: Time: 0.00 seconds.
# PYBOOT: Result: FAIL
======================================================================
arm-omap2plus_defconfig
-----------------------
3730xm: FAIL: last 24 lines of boot log:
----------------------------------------
[ 3.692657] usb 1-2.1: New USB device found, idVendor=0424, idProduct=ec00
[ 3.699920] usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.713348] smsc95xx v1.0.4
[ 3.807830] smsc95xx 1-2.1:1.0 eth0: register 'smsc95xx' at usb-ehci-omap.0-2.1, smsc95xx USB 2.0 Ethernet, 8a:42:dc:3e:e9:12
[ 3.904754] smsc95xx 1-2.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 5.314880] smsc95xx 1-2.1:1.0 eth0: link up, 100Mbps, half-duplex, lpa 0x40A1
[ 5.351898] Sending DHCP requests ., OK
[ 8.142333] IP-Config: Got DHCP answer from 192.168.1.254, my address is 192.168.1.242
[ 8.151306] IP-Config: Complete:
[ 8.154785] device=eth0, hwaddr=8a:42:dc:3e:e9:12, ipaddr=192.168.1.242, mask=255.255.255.0, gw=192.168.1.254
[ 8.165710] host=192.168.1.242, domain=lan, nis-domain=(none)
[ 8.172241] bootserver=192.168.1.254, rootserver=192.168.1.2, rootpath=
[ 8.179443] nameserver0=192.168.1.254
[ 8.246002] VFS: Mounted root (nfs filesystem) on device 0:12.
[ 8.254669] devtmpfs: mounted
[ 8.258728] Freeing unused kernel memory: 380K (c0723000 - c0782000)
modprobe: FATAL: Could not load /lib/modules/3.11.0-rc4/modules.dep: No such file or directory
INIT: version 2.88 booting
Using makefile-style concurrent boot in runlevel S.
Starting the hotplug events dispatcher: udevd~$off
# PYBOOT: Exception: ERROR: Timeout waiting for command: if test -n ${preboot}; then run preboot; fi.
# PYBOOT: Time: 0.00 seconds.
# PYBOOT: Result: FAIL