Kernel-build-reports September 2013

kernel-build-reports@lists.linaro.org

12 participants
377 discussions

queue boot: 6 passed 7 failed (queue/v3.10.13)

by Olof's autobooter

arndale : passed 0:48.52 bbb : FAILED 1:14.58 beaver : passed 0:35.43 multi-beaver : FAILED 0:42.35 cubie : FAILED 0:12.91 cubie2 : FAILED 0:53.33 cubox : passed 0:51.88 panda : passed 0:56.27 multi-panda : FAILED 0:47.08 sama5 : passed 1:46.12 snowball : passed 0:57.60 multi-snowball : FAILED 0:44.00 multi-trimslice : FAILED 0:44.38 Board legend: Board : System SoC Defconfig arndale : InSignal ArndaleBoard Samsung Exynos 5250 exynos_defconfig bbb : BeagleBone Black TI Sitara AM3359 omap2plus_defconfig beaver : Nvidia Beaver Nvidia Tegra 30 tegra_defconfig multi-beaver : multi_v7_defconfig cubie : Cubieboard Allwinner A10 multi_v7_defconfig cubie2 : Cubieboard 2 Allwinner A20 multi_v7_defconfig cubox : SolidRun Cubox Marvell 88AP510 dove_defconfig multi-trimslice : CompuLab TrimSlice Nvidia Tegra 20 multi_v7_defconfig panda : TI PandaBoard ES TI OMAP4460 omap2plus_defconfig multi-panda : multi_v7_defconfig sama5 : Atmel SAMA5 devboard Atmel SAMA5D35 sama5_defconfig snowball : CALAO Snowball ST-Ericsson A9500 u8500_defconfig multi-snowball : multi_v7_defconfig Last entries of failed logs below: ======================================================================== Board bbb failure log: ------------------------------------------------- Environment size: 4191/131068 bytes U-Boot# setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp' setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp' U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp U-Boot# tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.10.13/uImage.omap tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.10.13/uImage.omap link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.4; our IP address is 172.16.1.123 Filename '/srv/tftp/queue/v3.10.13/uImage.omap'. Load address: 0x80000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ##### 625 KiB/s done Bytes transferred = 4017280 (3d4c80 hex) U-Boot# tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.13/am335x-boneblack.dtb tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.13/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.4; our IP address is 172.16.1.123 Filename '/srv/tftp/queue/v3.10.13/am335x-boneblack.dtb'. Load address: 0x81000000 Loading: * TFTP error: 'File not found' (1) Not retrying... U-Boot# ~$off ======================================================================== Board cubie failure log: ------------------------------------------------- io scheduler deadline registered io scheduler cfq registered (default) sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver ipmi message hanode: cubie status: on ndler version 39.2 IPMI System Interface driver. ipmi_si: Adding default-specified kcs state machine ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca2-0000000000000ca2> Trying to free nonexistent resource <0000000000000ca3-0000000000000ca3> ipmi_si: Adding default-specified smic state machine ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca9-0000000000000ca9> Trying to free nonexistent resource <0000000000000caa-0000000000000caa> Trying to free nonexistent resource <0000000000000cab-0000000000000cab> ipmi_si: Adding default-specified bt state machine ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <00000000000000e4-00000000000000e4> Trying to free nonexistent resource <00000000000000e5-00000000000000e5> Trying to free nonexistent resource <00000000000000e6-00000000000000e6> ipmi_si: Unable to find any System Interface(s) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 17) is a U6_16550A console [ttyS0] enabled usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 Registering SWP/SWPB emulation handler ../../drivers/rtc/hctosys.c: unable to open rtc device (rtc0) List of all partitions: No filesystem could mount root, tried: Kernel panic - not syncing: VFS: Unable to mount r~$off ======================================================================== Board cubie2 failure log: ------------------------------------------------- netmask=255.255.255.0 panicarg=panic=10 partition=0:1 scriptaddr=0x44000000 serverip=172.16.1.4 setargs=if test -z \\"$root\\"; then if test \\"$bootpath\\" = "boot/"; then root="/dev/mmcblk0p1 rootwait"; else root="/dev/mmcblk0p2 rootwait"; fi; fi; setenv bootargs console=${console} root=${root} loglevel=${loglevel} ${panicarg} ${extraargs} stderr=serial stdin=serial stdout=serial Environment size: 2087/131068 bytes sun7i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i#tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.10.13/uImage.multi-1g tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.10.13/uImage.multi-1g Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.169 Filename '/srv/tftp/queue/v3.10.13/uImage.multi-1g'. Load address: 0x41000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 1.7 MiB/s done Bytes transferred = 1820664 (1bc7f8 hex) sun7i#tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.10.13/sun7i-a20-cubieboard2.dtb tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.10.13/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.169 Filename '/srv/tftp/queue/v3.10.13/sun7i-a20-cubieboard2.dtb'. Load address: 0x42000000 Loading: * TFTP error: 'File not found' (1) Not retrying... sun7i#node: cubie2 status: on ~$off ======================================================================== Board multi-beaver failure log: ------------------------------------------------- Using asx0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.111 Filename '/srv/tftp/queue/v3.10.13/uImage.multi-2g'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 1.9 MiB/s done Bytes transferred = 1820664 (1bc7f8 hex) Tegra30 (Beaver) # tftpboot 0x83000000 172.16.1.4:/srv/tftp/queue/v3.10.13/tegra30-beaver.dtb tftpboot 0x83000000 172.16.1.4:/srv/tftp/queue/v3.10.13/tegra30-beaver.dtb Using asx0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.111 Filename '/srv/tftp/queue/v3.10.13/tegra30-beaver.dtb'. Load address: 0x83000000 Loading: *#### 1.3 MiB/s done Bytes transferred = 16546 (40a2 hex) Tegra30 (Beaver) # bootm 0x82000000 - 0x83000000 bootm 0x82000000 - 0x83000000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1820600 Bytes = 1.7 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Kernel Image ... OK Loading Device Tree to 8fff8000, end 8ffff0a1 ... OK Starting kernel ... ~$off ======================================================================== Board multi-panda failure log: ------------------------------------------------- TFTP from server 172.16.1.4; our IP address is 172.16.1.182 Filename '/srv/tftp/queue/v3.10.13/uImage.multi-2g'. Load address: 0x80000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### done Bytes transferred = 1820664 (1bc7f8 hex) Panda # tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.13/omap4-panda-es.dtb tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.13/omap4-panda-es.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.182 Filename '/srv/tftp/queue/v3.10.13/omap4-panda-es.dtb'. Load address: 0x81000000 Loading: *#### done Bytes transferred = 17271 (4377 hex) Panda # bootm 0x80000000 - 0x81000000 bootm 0x80000000 - 0x81000000 ## Booting kernel from Legacy Image at 80000000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1820600 Bytes = 1.7 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 81000000 Booting using the fdt blob at 0x81000000 Loading Kernel Image ... OK OK reserving fdt memory region: addr=9d000000 size=3000000 Using Device Tree in place at 81000000, end 81007376 Starting kernel ... ~$off ======================================================================== Board multi-snowball failure log: ------------------------------------------------- ipaddr=172.16.1.137 serverip=172.16.1.7 bootfile=queue/v3.10.13/uImage.multi-snowball autoboot=no Environment size: 1694/4092 bytes U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.10.13/uImage.multi-snowball tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.10.13/uImage.multi-snowball smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.137 Filename '/srv/tftp/queue/v3.10.13/uImage.multi-snowball'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### done Bytes transferred = 1820664 (1bc7f8 hex) U8500 $ bootm 0x100000 bootm 0x100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1820600 Bytes = 1.7 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off ======================================================================== Board multi-trimslice failure log: ------------------------------------------------- *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.150 TrimSlice # setenv bootfile queue/v3.10.13/uImage.multi-trimslice setenv bootfile queue/v3.10.13/uImage.multi-trimslice TrimSlice # setenv autoboot no setenv autoboot no TrimSlice # printenv printenv bootdelay=5 baudrate=115200 loadaddr=0x408000 stdin=serial,usbkbd stdout=serial,lcd stderr=serial,lcd console=ttyS0,115200n8 ethact=RTL8169#0 gateway=172.16.1.1 bootcmd=none bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw autoload=no netmask=255.255.255.0 ipaddr=172.16.1.150 serverip=172.16.1.7 bootfile=queue/v3.10.13/uImage.multi-trimslice autoboot=no Environment size: 364/65532 bytes TrimSlice # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw TrimSlice # tftpboot 0x800000 172.16.1.4:/srv/tftp/queue/v3.10.13/uImage.multi-trimslice tftpboot 0x800000 172.16.1.4:/srv/tftp/queue/v3.10.13/uImage.multi-trimslice Using RTL8169#0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.150 Filename '/srv/tftp/queue/v3.10.13/uImage.multi-trimslice'. Load address: 0x800000 Loading: * TFTP error: 'File not found' (1) Not retrying... TrimSlice # ~$off

11 years, 2 months

queue build: 12 warnings 0 failures (queue/v3.10.13)

by Olof's autobuilder

11 years, 2 months

queue boot: 9 passed 4 failed (queue/v3.11.2)

by Olof's autobooter

arndale : passed 0:51.00 bbb : FAILED 1:09.72 beaver : passed 0:34.72 multi-beaver : passed 0:31.67 cubie2 : FAILED 0:52.62 cubie : passed 0:49.58 cubox : passed 0:50.60 panda : passed 0:51.81 multi-panda : passed 0:50.65 sama5 : passed 1:40.05 snowball : passed 1:05.45 multi-snowball : FAILED 0:50.83 multi-trimslice : FAILED 0:45.40 Board legend: Board : System SoC Defconfig arndale : InSignal ArndaleBoard Samsung Exynos 5250 exynos_defconfig bbb : BeagleBone Black TI Sitara AM3359 omap2plus_defconfig beaver : Nvidia Beaver Nvidia Tegra 30 tegra_defconfig multi-beaver : multi_v7_defconfig cubie : Cubieboard Allwinner A10 multi_v7_defconfig cubie2 : Cubieboard 2 Allwinner A20 multi_v7_defconfig cubox : SolidRun Cubox Marvell 88AP510 dove_defconfig multi-trimslice : CompuLab TrimSlice Nvidia Tegra 20 multi_v7_defconfig panda : TI PandaBoard ES TI OMAP4460 omap2plus_defconfig multi-panda : multi_v7_defconfig sama5 : Atmel SAMA5 devboard Atmel SAMA5D35 sama5_defconfig snowball : CALAO Snowball ST-Ericsson A9500 u8500_defconfig multi-snowball : multi_v7_defconfig Last entries of failed logs below: ======================================================================== Board bbb failure log: ------------------------------------------------- Environment size: 4190/131068 bytes U-Boot# setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp' setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp' U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp U-Boot# tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.11.2/uImage.omap tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.11.2/uImage.omap link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.4; our IP address is 172.16.1.123 Filename '/srv/tftp/queue/v3.11.2/uImage.omap'. Load address: 0x80000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################### 625 KiB/s done Bytes transferred = 4089960 (3e6868 hex) U-Boot# tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.11.2/am335x-boneblack.dtb tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.11.2/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.4; our IP address is 172.16.1.123 Filename '/srv/tftp/queue/v3.11.2/am335x-boneblack.dtb'. Load address: 0x81000000 Loading: * TFTP error: 'File not found' (1) Not retrying... U-Boot# ~$off ======================================================================== Board cubie2 failure log: ------------------------------------------------- setargs=if test -z \\"$root\\"; then if test \\"$bootpath\\" = "boot/"; then root="/dev/mmcblk0p1 rootwait"; else root="/dev/mmcblk0p2 rootwait"; fi; fi; setenv bootargs console=${console} root=${root} loglevel=${loglevel} ${panicarg} ${extraargs} stderr=serial stdin=serial stdout=serial Environment size: 2086/131068 bytes sun7i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i#tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.11.2/uImage.multi-1g tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.11.2/uImage.multi-1g Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.169 Filename '/srv/tftp/queue/v3.11.2/uImage.multi-1g'. Load address: 0x41000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################### 1.7 MiB/s done Bytes transferred = 3588712 (36c268 hex) sun7i#tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.11.2/sun7i-a20-cubieboard2.dtb tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.11.2/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.169 Filename '/srv/tftp/queue/v3.11.2/sun7i-a20-cubieboard2.dtb'. Load address: 0x42000000 Loading: * TFTP error: 'File not found' (1) Not retrying... sun7i#node: cubie2 status: on ~$off ======================================================================== Board multi-snowball failure log: ------------------------------------------------- Environment size: 1693/4092 bytes U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.11.2/uImage.multi-snowball tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.11.2/uImage.multi-snowball smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.137 Filename '/srv/tftp/queue/v3.11.2/uImage.multi-snowball'. Load address: 0x100000 Loading: *#T ################################################################ ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ####################################################### done Bytes transferred = 3605434 (3703ba hex) U8500 $ bootm 0x100000 bootm 0x100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3605370 Bytes = 3.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off ======================================================================== Board multi-trimslice failure log: ------------------------------------------------- autoboot=no Environment size: 363/65532 bytes TrimSlice # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw TrimSlice # tftpboot 0x800000 172.16.1.4:/srv/tftp/queue/v3.11.2/uImage.multi-trimslice tftpboot 0x800000 172.16.1.4:/srv/tftp/queue/v3.11.2/uImage.multi-trimslice Using RTL8169#0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.150 Filename '/srv/tftp/queue/v3.11.2/uImage.multi-trimslice'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ####################################################### done Bytes transferred = 3605269 (370315 hex) TrimSlice # bootm 0x800000 bootm 0x800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3605205 Bytes = 3.4 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... ~$off

11 years, 2 months

queue build: 10 warnings 0 failures (queue/v3.11.2)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was queue, found at: Local queue of patches applied from http://git.kernel.org/cgit/linux/kernel/git/stable/stable-queue.git Topmost commit: a3308b5 Linux 3.11.2 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/queue/v3.11.2/ Runtime: 36m 0s Passed: 119 Failed: 0 Warnings: 10 Section mismatches: 8 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 arch/arm/mach-omap2/gpmc.c:1495:4: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' [-Wformat=] 1 drivers/dma/ste_dma40.c:3228:2: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' [-Wformat=] 1 drivers/dma/ste_dma40.c:3582:3: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' [-Wformat=] 1 drivers/dma/ste_dma40.c:3582:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'resource_size_t' [-Wformat=] 1 drivers/dma/ste_dma40.c:3593:5: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'resource_size_t' [-Wformat=] 1 drivers/mmc/host/tmio_mmc_pio.c:798:19: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 drivers/spi/spi-pl022.c:2197:9: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 drivers/tty/serial/imx.c:1134:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 4 drivers/usb/host/xhci.c:3589:17: warning: unused variable 'dev' [-Wunused-variable] 4 drivers/usb/host/xhci.c:3675:17: warning: unused variable 'dev' [-Wunused-variable] Section mismatches: 1 bcm_defconfig WARNING: drivers/built-in.o(.data+0x5a7c): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the function .init.text:sdhci_bcm_kona_probe() 1 bcm_defconfig WARNING: drivers/built-in.o(.data+0x5aa4): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the (unknown reference) .init.data:(unknown) 1 bcm_defconfig WARNING: drivers/mmc/built-in.o(.data+0x4dc): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the function .init.text:sdhci_bcm_kona_probe() 1 bcm_defconfig WARNING: drivers/mmc/built-in.o(.data+0x504): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the (unknown reference) .init.data:(unknown) 1 bcm_defconfig WARNING: drivers/mmc/host/built-in.o(.data+0x0): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the function .init.text:sdhci_bcm_kona_probe() 1 bcm_defconfig WARNING: drivers/mmc/host/built-in.o(.data+0x28): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the (unknown reference) .init.data:(unknown) 1 bcm_defconfig WARNING: vmlinux.o(.data+0xe43c): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the function .init.text:sdhci_bcm_kona_probe() 1 bcm_defconfig WARNING: vmlinux.o(.data+0xe464): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the (unknown reference) .init.data:(unknown)

11 years, 2 months

queue boot: 9 passed 4 failed (queue/v3.11.1)

by Olof's autobooter

arndale : passed 0:51.52 bbb : FAILED 1:13.16 beaver : passed 0:34.89 multi-beaver : passed 0:32.57 cubie : passed 0:50.54 cubie2 : FAILED 0:52.39 cubox : passed 0:47.47 panda : passed 0:53.37 multi-panda : passed 0:48.42 sama5 : passed 1:38.79 snowball : passed 1:05.35 multi-snowball : FAILED 0:45.63 multi-trimslice : FAILED 0:48.12 Board legend: Board : System SoC Defconfig arndale : InSignal ArndaleBoard Samsung Exynos 5250 exynos_defconfig bbb : BeagleBone Black TI Sitara AM3359 omap2plus_defconfig beaver : Nvidia Beaver Nvidia Tegra 30 tegra_defconfig multi-beaver : multi_v7_defconfig cubie : Cubieboard Allwinner A10 multi_v7_defconfig cubie2 : Cubieboard 2 Allwinner A20 multi_v7_defconfig cubox : SolidRun Cubox Marvell 88AP510 dove_defconfig multi-trimslice : CompuLab TrimSlice Nvidia Tegra 20 multi_v7_defconfig panda : TI PandaBoard ES TI OMAP4460 omap2plus_defconfig multi-panda : multi_v7_defconfig sama5 : Atmel SAMA5 devboard Atmel SAMA5D35 sama5_defconfig snowball : CALAO Snowball ST-Ericsson A9500 u8500_defconfig multi-snowball : multi_v7_defconfig Last entries of failed logs below: ======================================================================== Board bbb failure log: ------------------------------------------------- Environment size: 4190/131068 bytes U-Boot# setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp' setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp' U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp U-Boot# tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.11.1/uImage.omap tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.11.1/uImage.omap link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.4; our IP address is 172.16.1.123 Filename '/srv/tftp/queue/v3.11.1/uImage.omap'. Load address: 0x80000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################### 625 KiB/s done Bytes transferred = 4089928 (3e6848 hex) U-Boot# tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.11.1/am335x-boneblack.dtb tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.11.1/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.4; our IP address is 172.16.1.123 Filename '/srv/tftp/queue/v3.11.1/am335x-boneblack.dtb'. Load address: 0x81000000 Loading: * TFTP error: 'File not found' (1) Not retrying... U-Boot# ~$off ======================================================================== Board cubie2 failure log: ------------------------------------------------- setargs=if test -z \\"$root\\"; then if test \\"$bootpath\\" = "boot/"; then root="/dev/mmcblk0p1 rootwait"; else root="/dev/mmcblk0p2 rootwait"; fi; fi; setenv bootargs console=${console} root=${root} loglevel=${loglevel} ${panicarg} ${extraargs} stderr=serial stdin=serial stdout=serial Environment size: 2086/131068 bytes sun7i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i#tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.11.1/uImage.multi-1g tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.11.1/uImage.multi-1g Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.169 Filename '/srv/tftp/queue/v3.11.1/uImage.multi-1g'. Load address: 0x41000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################### 1.7 MiB/s done Bytes transferred = 3588456 (36c168 hex) sun7i#tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.11.1/sun7i-a20-cubieboard2.dtb tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.11.1/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.169 Filename '/srv/tftp/queue/v3.11.1/sun7i-a20-cubieboard2.dtb'. Load address: 0x42000000 Loading: * TFTP error: 'File not found' (1) Not retrying... sun7i#node: cubie2 status: on ~$off ======================================================================== Board multi-snowball failure log: ------------------------------------------------- Environment size: 1693/4092 bytes U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.11.1/uImage.multi-snowball tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.11.1/uImage.multi-snowball smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.137 Filename '/srv/tftp/queue/v3.11.1/uImage.multi-snowball'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ####################################################### done Bytes transferred = 3605178 (3702ba hex) U8500 $ bootm 0x100000 bootm 0x100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3605114 Bytes = 3.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off ======================================================================== Board multi-trimslice failure log: ------------------------------------------------- autoboot=no Environment size: 363/65532 bytes TrimSlice # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw TrimSlice # tftpboot 0x800000 172.16.1.4:/srv/tftp/queue/v3.11.1/uImage.multi-trimslice tftpboot 0x800000 172.16.1.4:/srv/tftp/queue/v3.11.1/uImage.multi-trimslice Using RTL8169#0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.150 Filename '/srv/tftp/queue/v3.11.1/uImage.multi-trimslice'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ####################################################### done Bytes transferred = 3605013 (370215 hex) TrimSlice # bootm 0x800000 bootm 0x800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3604949 Bytes = 3.4 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... ~$off

11 years, 2 months

queue build: 8 warnings 0 failures (queue/v3.11.1)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was queue, found at: Local queue of patches applied from http://git.kernel.org/cgit/linux/kernel/git/stable/stable-queue.git Topmost commit: 5c68732 Linux 3.11.1 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/queue/v3.11.1/ Runtime: 38m 37s Passed: 119 Failed: 0 Warnings: 8 Section mismatches: 8 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 arch/arm/mach-omap2/gpmc.c:1495:4: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' [-Wformat=] 1 drivers/dma/ste_dma40.c:3228:2: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' [-Wformat=] 1 drivers/dma/ste_dma40.c:3582:3: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' [-Wformat=] 1 drivers/dma/ste_dma40.c:3582:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'resource_size_t' [-Wformat=] 1 drivers/dma/ste_dma40.c:3593:5: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'resource_size_t' [-Wformat=] 1 drivers/mmc/host/tmio_mmc_pio.c:798:19: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 drivers/spi/spi-pl022.c:2197:9: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 drivers/tty/serial/imx.c:1134:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] Section mismatches: 1 bcm_defconfig WARNING: drivers/built-in.o(.data+0x5a7c): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the function .init.text:sdhci_bcm_kona_probe() 1 bcm_defconfig WARNING: drivers/built-in.o(.data+0x5aa4): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the (unknown reference) .init.data:(unknown) 1 bcm_defconfig WARNING: drivers/mmc/built-in.o(.data+0x4dc): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the function .init.text:sdhci_bcm_kona_probe() 1 bcm_defconfig WARNING: drivers/mmc/built-in.o(.data+0x504): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the (unknown reference) .init.data:(unknown) 1 bcm_defconfig WARNING: drivers/mmc/host/built-in.o(.data+0x0): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the function .init.text:sdhci_bcm_kona_probe() 1 bcm_defconfig WARNING: drivers/mmc/host/built-in.o(.data+0x28): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the (unknown reference) .init.data:(unknown) 1 bcm_defconfig WARNING: vmlinux.o(.data+0xe43c): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the function .init.text:sdhci_bcm_kona_probe() 1 bcm_defconfig WARNING: vmlinux.o(.data+0xe464): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the (unknown reference) .init.data:(unknown)

11 years, 2 months

arm-soc/for-next boot: 23 pass, 2 fail (fixes-for-linus-408-ge4f7a53)

by Kevin Hilman build bot

Automated DT boot report for various ARM defconfigs. Boot test simply checks if kernel can boot to initramfs with busybox and run some basic commands (e.g. 'cat /proc/cpuinfo'). Tree/Branch: arm-soc/for-next Git describe: fixes-for-linus-408-ge4f7a53 Commit: e4f7a53270 NEXT: ARM: add arm-soc-for-next-contents.txt Failed boot tests (console logs at the end) =========================================== omap4-panda: FAIL: arm-omap2plus_defconfig omap4-panda-es: FAIL: arm-omap2plus_defconfig Full Report =========== arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.4 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.2 sec imx6q-wandboard PASS: 0 min 15.0 sec arm-omap2plus_defconfig ----------------------- am335x-boneblack PASS: 0 min 27.2 sec omap3-beagle-xm PASS: 0 min 51.4 sec am335x-bone PASS: 0 min 26.3 sec omap3-tobi,3530overo PASS: 0 min 42.3 sec omap4-panda FAIL: 2 min 23.0 sec omap4-panda-es FAIL: 2 min 28.7 sec omap3-tobi,3730storm PASS: 0 min 41.6 sec omap3-beagle PASS: 1 min 4.7 sec arm-multi_v7_defconfig ---------------------- am335x-boneblack PASS: 0 min 31.8 sec omap3-beagle-xm PASS: 0 min 51.8 sec omap4-panda-es PASS: 1 min 5.6 sec omap4-panda PASS: 0 min 58.7 sec sun4i-a10-cubieboard PASS: 0 min 11.6 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.5 sec omap3-tobi,3530overo PASS: 0 min 41.0 sec am335x-bone PASS: 0 min 33.4 sec imx6q-wandboard PASS: 0 min 15.7 sec omap3-tobi,3730storm PASS: 0 min 40.5 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.7 sec omap3-beagle PASS: 1 min 14.3 sec arm-exynos_defconfig -------------------- exynos5250-arndale PASS: 0 min 29.9 sec arm-sama5_defconfig ------------------- sama5d35ek PASS: 0 min 18.3 sec Console logs for failures ========================= arm-omap2plus_defconfig ----------------------- omap4-panda: FAIL: last 24 lines of boot log: --------------------------------------------- [ 2.455352] omap-dma-engine 4a056000.dma-controller: allocating channel for 59 [ 2.586639] twl_rtc rtc.11: setting system clock to 2013-09-26 09:57:48 UTC (1380189468) [ 2.732757] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.743560] mmc0: new high speed SD card at address aaaa [ 2.751403] mmcblk0: mmc0:aaaa SD02G 1.84 GiB [ 2.761383] mmcblk0: p1 p2 [ 16.758087] EXT4-fs (mmcblk0p2): recovery complete [ 16.771209] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 16.779937] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 16.788787] devtmpfs: mounted [ 16.788787] Freeing unused kernel memory: 392K (c074f000 - c07b1000) [ 17.290466] init: ureadahead main process (793) terminated with status 5 * Setting sensors limits [80G [74G[ OK ] * Loading cpufreq kernel modules... [80G Last login: Tue Sep 24 15:36:00 UTC 2013 on tty1 Welcome to Linaro 13.08 (GNU/Linux 3.12.0-rc2-00408-ge4f7a53 armv7l) * Documentation: https://wiki.linaro.org/ [74G[ OK ] * CPUFreq Utilities: Setting ondemand CPUFreq governor... [80G * disabled, governor not available... [80Groot@linaro-developer:~# [74G[ OK ] ~$off # PYBOOT: Exception: userspace: ERROR: Never found root shell # PYBOOT: Time: 143.04 seconds. # PYBOOT: Result: FAIL omap4-panda-es: FAIL: last 24 lines of boot log: ------------------------------------------------ [ 20.711547] EXT4-fs (mmcblk0p2): recovery complete [ 21.590209] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 21.599365] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 21.607971] devtmpfs: mounted [ 21.611602] Freeing unused kernel memory: 392K (c074f000 - c07b1000) [ 22.135894] init: ureadahead main process (794) terminated with status 5 [ 25.708343] init: Caught segmentation fault, core dumped [ 25.721282] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000b00 [ 25.721282] [ 25.721405] CPU0: stopping [ 25.734008] CPU: 0 PID: 866 Comm: loadkeys Not tainted 3.12.0-rc2-00408-ge4f7a53 #1 [ 25.734008] [<c001bc28>] (unwind_backtrace+0x0/0xf0) from [<c0017e50>] (show_stack+0x10/0x14) [ 25.734008] [<c0017e50>] (show_stack+0x10/0x14) from [<c05076d8>] (dump_stack+0x78/0x94) [ 25.734008] [<c05076d8>] (dump_stack+0x78/0x94) from [<c00198f0>] (handle_IPI+0x10c/0x134) [ 25.734008] [<c00198f0>] (handle_IPI+0x10c/0x134) from [<c00085d4>] (gic_handle_irq+0x54/0x5c) [ 25.777740] [<c00085d4>] (gic_handle_irq+0x54/0x5c) from [<c050dd3c>] (__irq_usr+0x3c/0x60) [ 25.777740] Exception stack(0xed9b9fb0 to 0xed9b9ff8) [ 25.777740] 9fa0: ffffffe5 00011599 00000066 0000004b [ 25.777740] 9fc0: 00028cee 00000080 00000000 00000000 0001e260 00000001 0001e3ac 00000036 [ 25.777740] 9fe0: 0001e00c be82b1a0 0000cba5 0000cb98 80000130 ffffffff ~$off # PYBOOT: Exception: userspace: ERROR: Never found root shell # PYBOOT: Time: 148.65 seconds. # PYBOOT: Result: FAIL

11 years, 2 months

next/master boot: 24 pass, 1 fail (next-20130926)

by Kevin Hilman build bot

Automated DT boot report for various ARM defconfigs. Boot test simply checks if kernel can boot to initramfs with busybox and run some basic commands (e.g. 'cat /proc/cpuinfo'). Tree/Branch: next/master Git describe: next-20130926 Commit: 9acc1f56ec Add linux-next specific files for 20130926 Failed boot tests (console logs at the end) =========================================== omap4-panda-es: FAIL: arm-omap2plus_defconfig Full Report =========== arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.4 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.2 sec imx6q-wandboard PASS: 0 min 15.0 sec arm-omap2plus_defconfig ----------------------- am335x-boneblack PASS: 0 min 27.1 sec omap3-beagle-xm PASS: 0 min 52.5 sec am335x-bone PASS: 0 min 26.3 sec omap3-tobi,3530overo PASS: 0 min 42.5 sec omap4-panda PASS: 1 min 4.2 sec omap4-panda-es FAIL: 2 min 30.9 sec omap3-tobi,3730storm PASS: 0 min 44.4 sec omap3-beagle PASS: 0 min 57.3 sec arm-multi_v7_defconfig ---------------------- am335x-boneblack PASS: 0 min 31.8 sec omap3-beagle-xm PASS: 0 min 51.9 sec omap4-panda-es PASS: 1 min 11.8 sec omap4-panda PASS: 1 min 2.0 sec sun4i-a10-cubieboard PASS: 0 min 11.6 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.4 sec omap3-tobi,3530overo PASS: 0 min 40.9 sec am335x-bone PASS: 0 min 33.4 sec imx6q-wandboard PASS: 0 min 15.7 sec omap3-tobi,3730storm PASS: 0 min 40.5 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.6 sec omap3-beagle PASS: 1 min 7.4 sec arm-exynos_defconfig -------------------- exynos5250-arndale PASS: 0 min 29.7 sec arm-sama5_defconfig ------------------- sama5d35ek PASS: 0 min 18.2 sec Console logs for failures ========================= arm-omap2plus_defconfig ----------------------- omap4-panda-es: FAIL: last 24 lines of boot log: ------------------------------------------------ [ 2.222198] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.228668] omap-dma-engine 4a056000.dma-controller: allocating channel for 62 [ 2.236419] omap-dma-engine 4a056000.dma-controller: allocating channel for 61 [ 2.246978] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.303131] pinctrl-single 4a31e040.pinmux: mux offset out of range: 0x38 (0x38) [ 2.311401] pinctrl-single 4a31e040.pinmux: could not add functions for pinmux_wl12xx_pins 56x [ 2.320800] omap-dma-engine 4a056000.dma-controller: allocating channel for 60 [ 2.328674] omap-dma-engine 4a056000.dma-controller: allocating channel for 59 [ 2.461975] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.472717] mmc0: new high speed SDHC card at address 1234 [ 2.480468] mmcblk0: mmc0:1234 SA04G 3.63 GiB [ 2.490264] mmcblk0: p1 p2 [ 2.538482] twl_rtc rtc.12: setting system clock to 2000-01-29 12:18:56 UTC (949148336) [ 23.117950] EXT4-fs (mmcblk0p2): recovery complete [ 23.126922] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 23.135803] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 23.144287] devtmpfs: mounted [ 23.148468] Freeing unused kernel memory: 392K (c0753000 - c07b5000) [ 23.668945] init: ureadahead main process (795) terminated with status 5 * Setting sensors limits [80G [74G[ OK ] ~$off # PYBOOT: Exception: userspace: ERROR: Never found root shell # PYBOOT: Time: 150.91 seconds. # PYBOOT: Result: FAIL

11 years, 2 months

arm-soc boot: 13 passed 0 failed (arm-soc/v3.12-rc2-45-ge4f7a53)

by Olof's autobooter

arndale : passed 0:48.05 bbb : passed 1:49.43 beaver : passed 1:45.85 multi-beaver : passed 0:28.66 cubie2 : passed 0:58.65 cubie : passed 0:51.36 cubox : passed 0:48.98 panda : passed 0:52.68 multi-panda : passed 0:49.73 sama5 : passed 1:34.57 snowball : passed 1:13.37 multi-snowball : passed 0:38.29 multi-trimslice : passed 0:34.46 Board legend: Board : System SoC Defconfig arndale : InSignal ArndaleBoard Samsung Exynos 5250 exynos_defconfig bbb : BeagleBone Black TI Sitara AM3359 omap2plus_defconfig beaver : Nvidia Beaver Nvidia Tegra 30 tegra_defconfig multi-beaver : multi_v7_defconfig cubie : Cubieboard Allwinner A10 multi_v7_defconfig cubie2 : Cubieboard 2 Allwinner A20 multi_v7_defconfig cubox : SolidRun Cubox Marvell 88AP510 dove_defconfig multi-trimslice : CompuLab TrimSlice Nvidia Tegra 20 multi_v7_defconfig panda : TI PandaBoard ES TI OMAP4460 omap2plus_defconfig multi-panda : multi_v7_defconfig sama5 : Atmel SAMA5 devboard Atmel SAMA5D35 sama5_defconfig snowball : CALAO Snowball ST-Ericsson A9500 u8500_defconfig multi-snowball : multi_v7_defconfig

11 years, 2 months

arm-soc build: 15 warnings 0 failures (arm-soc/v3.12-rc2-45-ge4f7a53)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was arm-soc, found at: http://git.kernel.org/cgit/linux/kernel/git/arm/arm-soc.git (for-next or to-build branch) Topmost commit: e4f7a53 NEXT: ARM: add arm-soc-for-next-contents.txt Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/arm-soc/v3.12-rc2-45-ge4f7a53/ Runtime: 10m 45s Passed: 116 Failed: 0 Warnings: 15 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/dma/imx-dma.c:579:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:579:3: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:593:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:603:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:930:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:930:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:960:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:960:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1092:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1166:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/cdma_hw.c:57:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/debug_hw.c:175:10: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' [-Wformat=] 1 drivers/tty/serial/imx.c:1542:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] Section mismatches:

11 years, 2 months

← Newer
1
2
3
4
5
6
7
8
...
38
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports September 2013