Kernel-build-reports September 2013

kernel-build-reports@lists.linaro.org

12 participants
377 discussions

next/master boot: 23 pass, 2 fail (next-20130924)

by Kevin Hilman build bot

Automated DT boot report for various ARM defconfigs. Boot test simply checks if kernel can boot to initramfs with busybox and run some basic commands (e.g. 'cat /proc/cpuinfo'). Tree/Branch: next/master Git describe: next-20130924 Commit: f879f32601 Add linux-next specific files for 20130924 Failed boot tests (console logs at the end) =========================================== omap3-beagle: FAIL: arm-omap2plus_defconfig omap3-beagle: FAIL: arm-multi_v7_defconfig Full Report =========== arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.4 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.2 sec imx6q-wandboard PASS: 0 min 15.0 sec arm-omap2plus_defconfig ----------------------- am335x-boneblack PASS: 0 min 27.4 sec omap3-beagle-xm PASS: 0 min 51.8 sec am335x-bone PASS: 0 min 26.3 sec omap3-tobi,3530overo PASS: 0 min 42.3 sec omap4-panda PASS: 1 min 5.1 sec omap4-panda-es PASS: 1 min 14.4 sec omap3-tobi,3730storm PASS: 0 min 41.5 sec omap3-beagle FAIL: 0 min 18.6 sec arm-multi_v7_defconfig ---------------------- am335x-boneblack PASS: 0 min 31.9 sec omap3-beagle-xm PASS: 0 min 52.3 sec omap4-panda-es PASS: 1 min 11.0 sec omap4-panda PASS: 0 min 59.5 sec sun4i-a10-cubieboard PASS: 0 min 11.6 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.5 sec omap3-tobi,3530overo PASS: 0 min 40.8 sec am335x-bone PASS: 0 min 33.4 sec imx6q-wandboard PASS: 0 min 15.9 sec omap3-tobi,3730storm PASS: 0 min 40.5 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.7 sec omap3-beagle FAIL: 0 min 18.7 sec arm-exynos_defconfig -------------------- exynos5250-arndale PASS: 0 min 35.5 sec arm-sama5_defconfig ------------------- sama5d35ek PASS: 0 min 18.4 sec Console logs for failures ========================= arm-omap2plus_defconfig ----------------------- omap3-beagle: FAIL: last 24 lines of boot log: ---------------------------------------------- if test -n ${initenv}; then run initenv; fi OMAP3 beagleboard.org # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found OMAP3 beagleboard.org # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no OMAP3 beagleboard.org # dhcp dhcp ERROR: Need valid 'usbnet_devaddr' to be set at ether.c:2369/usb_eth_init() Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x8008d80 BOOTP broadcast 2 ~$off # PYBOOT: Exception: u-boot: ERROR: timed-out getting DHCP address. # PYBOOT: Time: 18.64 seconds. # PYBOOT: Result: FAIL arm-multi_v7_defconfig ---------------------- omap3-beagle: FAIL: last 24 lines of boot log: ---------------------------------------------- if test -n ${initenv}; then run initenv; fi OMAP3 beagleboard.org # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found OMAP3 beagleboard.org #setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no OMAP3 beagleboard.org # dhcp dhcp ERROR: Need valid 'usbnet_devaddr' to be set at ether.c:2369/usb_eth_init() Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 ~$off # PYBOOT: Exception: u-boot: ERROR: timed-out getting DHCP address. # PYBOOT: Time: 18.68 seconds. # PYBOOT: Result: FAIL

10 years, 8 months

next/master build: 0 failures 16 warnings (next-20130924)

by Kevin Hilman build bot

Automated build results for all ARM defconfigs. Summarizes all build errors, warnings and section mismatches followed by a per-defconfig summary. Tree/Branch: next/master Git describe: next-20130924 Commit: f879f32601 Add linux-next specific files for 20130924 Build Time: 118 min 3 sec Passed: 130 / 130 (100.00 %) Failed: 0 / 130 ( 0.00 %) Errors: 0 Warnings: 16 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): arm-spitz_defconfig: 1 warnings 0 mismatches arm-mini2440_defconfig: 1 warnings 0 mismatches arm-multi_v7_defconfig+lpae.config: 15 warnings 0 mismatches arm-iop13xx_defconfig: 1 warnings 0 mismatches arm-corgi_defconfig: 1 warnings 0 mismatches arm-iop32x_defconfig: 1 warnings 0 mismatches ------------------------------------------------------------------------------- Warnings Summary: 16 5 crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 drivers/tty/serial/imx.c:1542:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/gpu/host1x/hw/debug_hw.c:175:10: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘dma_addr_t’ [-Wformat] 1 drivers/gpu/host1x/hw/cdma_hw.c:57:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-sdma.c:1166:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-sdma.c:1092:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-dma.c:960:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 7 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-dma.c:960:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-dma.c:930:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 7 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-dma.c:930:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-dma.c:603:4: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 9 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-dma.c:593:4: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 9 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-dma.c:579:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 7 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-dma.c:579:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- arm-spitz_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] ------------------------------------------------------------------------------- arm-mini2440_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] ------------------------------------------------------------------------------- arm-multi_v7_defconfig+lpae.config : PASS, 0 errors, 15 warnings, 0 section mismatches Warnings: drivers/dma/imx-sdma.c:1092:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-sdma.c:1166:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘dma_addr_t’ [-Wformat] drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-dma.c:579:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-dma.c:579:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 7 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-dma.c:593:4: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 9 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-dma.c:603:4: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 9 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-dma.c:930:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-dma.c:930:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 7 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-dma.c:960:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-dma.c:960:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 7 has type ‘dma_addr_t’ [-Wformat] drivers/gpu/host1x/hw/cdma_hw.c:57:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘dma_addr_t’ [-Wformat] drivers/gpu/host1x/hw/debug_hw.c:175:10: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘dma_addr_t’ [-Wformat] drivers/tty/serial/imx.c:1542:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] ------------------------------------------------------------------------------- arm-iop13xx_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] ------------------------------------------------------------------------------- arm-corgi_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] ------------------------------------------------------------------------------- arm-iop32x_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: arm-realview-smp_defconfig arm-at91rm9200_defconfig arm-pcm027_defconfig arm-rmk-omap3430-ldp.config arm-bcm2835_defconfig arm-ixp4xx_defconfig arm-dove_defconfig arm-nuc950_defconfig arm-ebsa110_defconfig arm-at91sam9261_9g10_defconfig arm-omap2plus_defconfig arm-bockw_defconfig arm-hackkit_defconfig arm-cns3420vb_defconfig arm-u300_defconfig arm-bcm_defconfig arm-exynos_defconfig arm-imx_v4_v5_defconfig arm-zeus_defconfig arm-rmk-sa11x0-neponset.config arm-davinci_all_defconfig arm-badge4_defconfig arm-exynos_defconfig+lpae.config arm-nuc960_defconfig arm-shark_defconfig arm-allnoconfig arm-em_x270_defconfig arm-armadillo800eva_defconfig arm-trizeps4_defconfig arm-acs5k_defconfig arm-rmk-realview.config arm-at91sam9260_9g20_defconfig arm-lpc32xx_defconfig arm-rmk-omap4430-ldp-allnoconfig.config arm-rmk-versatile.config arm-vexpress_defconfig arm-ape6evm_defconfig arm-netx_defconfig arm-socfpga_defconfig arm-orion5x_defconfig arm-cm_x2xx_defconfig arm-da8xx_omapl_defconfig arm-omap2plus_defconfig+pm.config arm-at91x40_defconfig arm-cerfcube_defconfig arm-versatile_defconfig arm-am200epdkit_defconfig arm-rmk-omap3430-ldp-allnoconfig.config arm-simpad_defconfig arm-pxa910_defconfig arm-acs5k_tiny_defconfig arm-xcep_defconfig arm-s5pv210_defconfig arm-at91_dt_defconfig arm-palmz72_defconfig arm-ezx_defconfig arm-imote2_defconfig arm-netwinder_defconfig arm-iop33x_defconfig arm-rmk-pxa.config arm-koelsch_defconfig arm-assabet_defconfig arm-magician_defconfig arm-mainstone_defconfig arm-s5pc100_defconfig arm-lager_defconfig arm-spear3xx_defconfig arm-shannon_defconfig arm-at91sam9g45_defconfig arm-prima2_defconfig arm-jornada720_defconfig arm-s3c2410_defconfig arm-pxa255-idp_defconfig arm-h3600_defconfig arm-colibri_pxa270_defconfig arm-nhk8815_defconfig arm-nuc910_defconfig arm-viper_defconfig arm-colibri_pxa300_defconfig arm-pleb_defconfig arm-mmp2_defconfig arm-spear6xx_defconfig arm-eseries_pxa_defconfig arm-ks8695_defconfig arm-raumfeld_defconfig arm-integrator_defconfig arm-footbridge_defconfig arm-pxa168_defconfig arm-multi_v7_defconfig arm-s5p64x0_defconfig arm-rpc_defconfig arm-mxs_defconfig arm-pxa3xx_defconfig arm-omap1_defconfig arm-kzm9d_defconfig arm-rmk-vexpress-ct9x4.config arm-ep93xx_defconfig arm-keystone_defconfig arm-at91sam9rl_defconfig arm-lubbock_defconfig arm-s3c6400_defconfig arm-imx_v6_v7_defconfig arm-at91sam9263_defconfig arm-mackerel_defconfig arm-clps711x_defconfig arm-collie_defconfig arm-tegra_defconfig arm-lart_defconfig arm-marzen_defconfig arm-kzm9g_defconfig arm-tct_hammer_defconfig arm-mv78xx0_defconfig arm-realview_defconfig arm-msm_defconfig arm-u8500_defconfig arm-cm_x300_defconfig arm-h5000_defconfig arm-kirkwood_defconfig arm-mvebu_defconfig arm-lpd270_defconfig arm-rmk-omap4430-ldp.config arm-spear13xx_defconfig arm-neponset_defconfig arm-sama5_defconfig

10 years, 8 months

next boot: 12 passed 1 failed (next/next-20130924)

by Olof's autobooter

arndale : passed 0:47.60 bbb : passed 1:52.12 beaver : passed 1:45.61 multi-beaver : passed 0:31.21 cubie2 : passed 1:01.32 cubie : passed 0:53.87 cubox : passed 0:48.61 panda : passed 0:52.44 multi-panda : passed 0:49.86 sama5 : passed 1:35.77 snowball : FAILED 0:21.23 multi-snowball : passed 0:39.40 multi-trimslice : passed 0:34.96 Board legend: Board : System SoC Defconfig arndale : InSignal ArndaleBoard Samsung Exynos 5250 exynos_defconfig bbb : BeagleBone Black TI Sitara AM3359 omap2plus_defconfig beaver : Nvidia Beaver Nvidia Tegra 30 tegra_defconfig multi-beaver : multi_v7_defconfig cubie : Cubieboard Allwinner A10 multi_v7_defconfig cubie2 : Cubieboard 2 Allwinner A20 multi_v7_defconfig cubox : SolidRun Cubox Marvell 88AP510 dove_defconfig multi-trimslice : CompuLab TrimSlice Nvidia Tegra 20 multi_v7_defconfig panda : TI PandaBoard ES TI OMAP4460 omap2plus_defconfig multi-panda : multi_v7_defconfig sama5 : Atmel SAMA5 devboard Atmel SAMA5D35 sama5_defconfig snowball : CALAO Snowball ST-Ericsson A9500 u8500_defconfig multi-snowball : multi_v7_defconfig Last entries of failed logs below: ======================================================================== Board snowball failure log: ------------------------------------------------- 5e60: 00000000 c055fd64 c0520da8 c021ceb8 c021cea0 c021bcc4 00000000 c0541888 5e80: c055fd64 c05418bc 00000000 c021beb0 00000000 c055fd64 c021be24 c021a19c 5ea0: ef03265c ef1b7734 c055fd64 ef20a700 c0552100 c021b450 c04785a0 c055fd64 5ec0: 00000006 c055fd64 00000006 c0565f80 c0565f80 c021c48c 00000000 c052f594 5ee0: 00000006 c0008798 ef010900 c047b654 ef09c100 c03ae640 00000000 00000001 5f00: 000044dc c0542c5c 60000013 00000001 00000003 00000000 c0da39bd c03c1ba0 5f20: 00000069 c0036b2c c04e17b4 00000006 c0da39c8 00000006 00000000 c052f594 5f40: 00000006 c0565f80 c0565f80 c05044dc 00000069 c0526fa4 c0526f98 c0504bc4 5f60: 00000006 00000006 c05044dc 00000000 00000001 00000000 00000000 00000000 5f80: c03a2be0 00000000 00000000 00000000 00000000 00000000 00000000 c03a2be8 5fa0: 00000000 00000000 c03a2be0 c000e438 00000000 00000000 00000000 00000000 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [<c02d6818>] (snd_soc_update_bits+0x4c/0x88) from [<c02e57e0>] (ab8500_audio_setup_mics+0xc8/0x118) [<c02e57e0>] (ab8500_audio_setup_mics+0xc8/0x118) from [<c02e59f4>] (ab8500_codec_probe+0x180/0x374) [<c02e59f4>] (ab8500_codec_probe+0x180/0x374) from [<c02d8de0>] (soc_probe_codec+0x178/0x2f4) [<c02d8de0>] (soc_probe_codec+0x178/0x2f4) from [<c02d9ac8>] (snd_soc_instantiate_card+0x720/0x113c) [<c02d9ac8>] (snd_soc_instantiate_card+0x720/0x113c) from [<c02da750>] (snd_soc_register_card+0x26c/0x324) [<c02da750>] (snd_soc_register_card+0x26c/0x324) from [<c02e7ee8>] (mop500_probe+0xd0/0x118) [<c02e7ee8>] (mop500_probe+0xd0/0x118) from [<c021ceb8>] (platform_drv_probe+0x18/0x1c) [<c021ceb8>] (platform_drv_probe+0x18/0x1c) from [<c021bcc4>] (driver_probe_device+0x10c/0x228) [<c021bcc4>] (driver_probe_device+0x10c/0x228) from [<c021beb0>] (__driver_attach+0x8c/0x90) [<c021beb0>] (__driver_attach+0x8c/0x90) from [<c021a19c>] (bus_for_each_dev+0x60/0x94) [<c021a19c>] (bus_for_each_dev+0x60/0x94) from [<c021b450>] (bus_add_driver+0x1d4/0x27c) [<c021b450>] (bus_add_driver+0x1d4/0x27c) from [<c021c48c>] (driver_register+0x78/0xf8) [<c021c48c>] (driver_register+0x78/0xf8) from [<c0008798>] (do_one_initcall+0xf8/0x144) [<c0008798>] (do_one_initcall+0xf8/0x144) from [<c0504bc4>] (kernel_init_freeable+0x138/0x1d8) [<c0504bc4>] (kernel_init_freeable+0x138/0x1d8) from [<c03a2be8>] (kernel_init+0x8/0x158) [<c03a2be8>] (kernel_init+0x8/0x158) from [<c000e438>] (ret_from_fork+0x14/0x3c) Code: bad PC value ---[ end trace d131287b945de8f8 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.12.0-rc2-next-20130924 #73 [<c00153f4>] (unwind_backtrace+0x0/0xf4) from [<c0011868>] (show_stack+0x10/0x14) [<c0011868>] (show_stack+0x10/0x14) from [<c03a69a0>] (dump_stack+0x98/0xd4) [<c03a69a0>] (dump_stack+0x98/0xd4) from [<c0013870>] (handle_IPI+0x108/0x118) [<c0013870>] (handle_IPI+0x108/0x118) from [<c0008538>] (gic_handle_irq+0x58/0x5c) [<c0008538>] (gic_handl~$off

10 years, 8 months

next build: 15 warnings 0 failures (next/next-20130924)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next, found at: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch) Topmost commit: f879f32 Add linux-next specific files for 20130924 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next/next-20130924/ Runtime: 40m 59s Passed: 118 Failed: 0 Warnings: 15 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/dma/imx-dma.c:579:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:579:3: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:593:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:603:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:930:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:930:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:960:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:960:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1092:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1166:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/cdma_hw.c:57:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/debug_hw.c:175:10: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' [-Wformat=] 1 drivers/tty/serial/imx.c:1542:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] Section mismatches:

10 years, 8 months

queue boot: 5 passed 8 failed (queue/v3.10.12-52-gd765903)

by Olof's autobooter

arndale : passed 0:45.87 bbb : FAILED 1:10.51 beaver : passed 0:31.64 multi-beaver : FAILED 0:42.38 cubie2 : FAILED 0:55.87 cubie : FAILED 0:13.77 cubox : passed 0:54.60 panda : passed 0:52.05 multi-panda : FAILED 0:46.77 sama5 : passed 1:42.51 snowball : FAILED 1:38.66 multi-snowball : FAILED 0:43.86 multi-trimslice : FAILED 0:43.56 Board legend: Board : System SoC Defconfig arndale : InSignal ArndaleBoard Samsung Exynos 5250 exynos_defconfig bbb : BeagleBone Black TI Sitara AM3359 omap2plus_defconfig beaver : Nvidia Beaver Nvidia Tegra 30 tegra_defconfig multi-beaver : multi_v7_defconfig cubie : Cubieboard Allwinner A10 multi_v7_defconfig cubie2 : Cubieboard 2 Allwinner A20 multi_v7_defconfig cubox : SolidRun Cubox Marvell 88AP510 dove_defconfig multi-trimslice : CompuLab TrimSlice Nvidia Tegra 20 multi_v7_defconfig panda : TI PandaBoard ES TI OMAP4460 omap2plus_defconfig multi-panda : multi_v7_defconfig sama5 : Atmel SAMA5 devboard Atmel SAMA5D35 sama5_defconfig snowball : CALAO Snowball ST-Ericsson A9500 u8500_defconfig multi-snowball : multi_v7_defconfig Last entries of failed logs below: ======================================================================== Board bbb failure log: ------------------------------------------------- Environment size: 4203/131068 bytes U-Boot# setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp' setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp' U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp U-Boot# tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.10.12-52-gd765903/uImage.omap tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.10.12-52-gd765903/uImage.omap link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.4; our IP address is 172.16.1.121 Filename '/srv/tftp/queue/v3.10.12-52-gd765903/uImage.omap'. Load address: 0x80000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ##### 625 KiB/s done Bytes transferred = 4017432 (3d4d18 hex) U-Boot# tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.12-52-gd765903/am335x-boneblack.dtb tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.12-52-gd765903/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.4; our IP address is 172.16.1.121 Filename '/srv/tftp/queue/v3.10.12-52-gd765903/am335x-boneblack.dtb'. Load address: 0x81000000 Loading: * TFTP error: 'File not found' (1) Not retrying... U-Boot# ~$off ======================================================================== Board cubie2 failure log: ------------------------------------------------- netmask=255.255.255.0 panicarg=panic=10 partition=0:1 scriptaddr=0x44000000 serverip=172.16.1.4 setargs=if test -z \\"$root\\"; then if test \\"$bootpath\\" = "boot/"; then root="/dev/mmcblk0p1 rootwait"; else root="/dev/mmcblk0p2 rootwait"; fi; fi; setenv bootargs console=${console} root=${root} loglevel=${loglevel} ${panicarg} ${extraargs} stderr=serial stdin=serial stdout=serial Environment size: 2099/131068 bytes sun7i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i#tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.10.12-52-gd765903/uImage.multi-1g tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.10.12-52-gd765903/uImage.multi-1g Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.167 Filename '/srv/tftp/queue/v3.10.12-52-gd765903/uImage.multi-1g'. Load address: 0x41000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 1.7 MiB/s done Bytes transferred = 1820752 (1bc850 hex) sun7i#tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.10.12-52-gd765903/sun7i-a20-cubieboard2.dtb tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.10.12-52-gd765903/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.167 Filename '/srv/tftp/queue/v3.10.12-52-gd765903/sun7i-a20-cubieboard2.dtb'. Load address: 0x42000000 Loading: * TFTP error: 'File not found' (1) Not retrying... sun7i#node: cubie2 status: on ~$off ======================================================================== Board cubie failure log: ------------------------------------------------- io scheduler deadline registered io scheduler cfq registered (default) sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver ipmi message handler version 39.2 IPMI System Interface driver. ipmi_si: Adding default-specified kcs state machine ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca2-0000000000000ca2> Trying to free nonexistent resource <0000000000000ca3-0000000000000ca3> ipmi_si: Adding default-specified smic state machine ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca9-0000000000000ca9> Trying to free nonexistent resource <0000000000000caa-0000000000000caa> Trying to free nonexistent resource <0000000000000cab-0000000000000cab> ipmi_si: Adding default-specified bt state machine ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <00000000000000e4-00000000000000e4> Trying to free nonexistent resource <00000000000000e5-00000000000000e5> Trying to free nonexistent resource <00000000000000e6-00000000000000e6> ipmi_si: Unable to find any System Interface(s) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 17) is a U6_16550A console [ttyS0] enabled usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 Registering SWP/SWPB emulation handler ../../drivers/rtc/hctosys.c: unable to open rtc device (rtc0) List of all partitions: No filesystem could mount root, tried: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,255) CPU: ~$off ======================================================================== Board multi-beaver failure log: ------------------------------------------------- Using asx0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.108 Filename '/srv/tftp/queue/v3.10.12-52-gd765903/uImage.multi-2g'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 1.9 MiB/s done Bytes transferred = 1820752 (1bc850 hex) Tegra30 (Beaver) # tftpboot 0x83000000 172.16.1.4:/srv/tftp/queue/v3.10.12-52-gd765903/tegra30-beaver.dtb tftpboot 0x83000000 172.16.1.4:/srv/tftp/queue/v3.10.12-52-gd765903/tegra30-beaver.dtb Using asx0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.108 Filename '/srv/tftp/queue/v3.10.12-52-gd765903/tegra30-beaver.dtb'. Load address: 0x83000000 Loading: *#### 1.4 MiB/s done Bytes transferred = 16546 (40a2 hex) Tegra30 (Beaver) # bootm 0x82000000 - 0x83000000 bootm 0x82000000 - 0x83000000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1820688 Bytes = 1.7 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Kernel Image ... OK Loading Device Tree to 8fff8000, end 8ffff0a1 ... OK Starting kernel ... ~$off ======================================================================== Board multi-panda failure log: ------------------------------------------------- TFTP from server 172.16.1.4; our IP address is 172.16.1.182 Filename '/srv/tftp/queue/v3.10.12-52-gd765903/uImage.multi-2g'. Load address: 0x80000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### done Bytes transferred = 1820752 (1bc850 hex) Panda # tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.12-52-gd765903/omap4-panda-es.dtb tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.12-52-gd765903/omap4-panda-es.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.182 Filename '/srv/tftp/queue/v3.10.12-52-gd765903/omap4-panda-es.dtb'. Load address: 0x81000000 Loading: *#### done Bytes transferred = 17271 (4377 hex) Panda # bootm 0x80000000 - 0x81000000 bootm 0x80000000 - 0x81000000 ## Booting kernel from Legacy Image at 80000000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1820688 Bytes = 1.7 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 81000000 Booting using the fdt blob at 0x81000000 Loading Kernel Image ... OK OK reserving fdt memory region: addr=9d000000 size=3000000 Using Device Tree in place at 81000000, end 81007376 Starting kernel ... ~$off ======================================================================== Board multi-snowball failure log: ------------------------------------------------- ipaddr=172.16.1.135 serverip=172.16.1.7 bootfile=queue/v3.10.12-52-gd765903/uImage.multi-snowball autoboot=no Environment size: 1706/4092 bytes U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.10.12-52-gd765903/uImage.multi-snowball tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.10.12-52-gd765903/uImage.multi-snowball smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.135 Filename '/srv/tftp/queue/v3.10.12-52-gd765903/uImage.multi-snowball'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### done Bytes transferred = 1820752 (1bc850 hex) U8500 $ bootm 0x100000 bootm 0x100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1820688 Bytes = 1.7 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off ======================================================================== Board multi-trimslice failure log: ------------------------------------------------- *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.148 TrimSlice # setenv bootfile queue/v3.10.12-52-gd765903/uImage.multi-trimslice setenv bootfile queue/v3.10.12-52-gd765903/uImage.multi-trimslice TrimSlice # setenv autoboot no setenv autoboot no TrimSlice # printenv printenv bootdelay=5 baudrate=115200 loadaddr=0x408000 stdin=serial,usbkbd stdout=serial,lcd stderr=serial,lcd console=ttyS0,115200n8 ethact=RTL8169#0 gateway=172.16.1.1 bootcmd=none bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw autoload=no netmask=255.255.255.0 ipaddr=172.16.1.148 serverip=172.16.1.7 bootfile=queue/v3.10.12-52-gd765903/uImage.multi-trimslice autoboot=no Environment size: 376/65532 bytes TrimSlice # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw TrimSlice # tftpboot 0x800000 172.16.1.4:/srv/tftp/queue/v3.10.12-52-gd765903/uImage.multi-trimslice tftpboot 0x800000 172.16.1.4:/srv/tftp/queue/v3.10.12-52-gd765903/uImage.multi-trimslice Using RTL8169#0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.148 Filename '/srv/tftp/queue/v3.10.12-52-gd765903/uImage.multi-trimslice'. Load address: 0x800000 Loading: * TFTP error: 'File not found' (1) Not retrying... TrimSlice # ~$off ======================================================================== Board snowball failure log: ------------------------------------------------- collisions:0 txqueuelen:1000 RX bytes:5912 (5.7 KiB) TX bytes:5174 (5.0 KiB) Interrupt:50 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) root@snowball:~# halt halt Broadcast message from root@snowball (ttyAMA2) (Tue Sep 24 04:37:10 2013): The system is going down for system halt NOW! INIT: Switching to runlevel: 0 INIT: Sending processes the TERM signal [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel 0. [....] Stopping web server: apache2 ... waiting .[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Asking all remaining processes to terminate...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] All processes ended within 1 seconds...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Stopping enhanced syslogd: rsyslogd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Deconfiguring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0/08:00:08:1e:0f:44 Sending on LPF/eth0/08:00:08:1e:0f:44 Sending on Socket/fallback DHCPRELEASE on eth0 to 172.16.1.1 port 67 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [[36minfo[39;49m] Saving the system clock. [[36minfo[39;49m] Hardware Clock updated to Tue Sep 24 04:37:16 UTC 2013. [....] Deactivating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. EXT4-fs (mmcblk0p4): re-mounted. Opts: (null) [[36minfo[39;49m] Will now halt. Power do~$off

10 years, 8 months

queue build: 12 warnings 0 failures (queue/v3.10.12-52-gd765903)

by Olof's autobuilder

10 years, 8 months

queue boot: 9 passed 4 failed (queue/v3.11.1-56-g71820c1)

by Olof's autobooter

arndale : passed 0:49.29 bbb : FAILED 1:13.48 beaver : passed 0:34.98 multi-beaver : passed 0:32.70 cubie : passed 0:47.59 cubie2 : FAILED 0:52.55 cubox : passed 0:47.51 panda : passed 0:55.30 multi-panda : passed 0:49.19 sama5 : passed 1:36.61 snowball : passed 1:59.47 multi-snowball : FAILED 0:46.55 multi-trimslice : FAILED 0:45.45 Board legend: Board : System SoC Defconfig arndale : InSignal ArndaleBoard Samsung Exynos 5250 exynos_defconfig bbb : BeagleBone Black TI Sitara AM3359 omap2plus_defconfig beaver : Nvidia Beaver Nvidia Tegra 30 tegra_defconfig multi-beaver : multi_v7_defconfig cubie : Cubieboard Allwinner A10 multi_v7_defconfig cubie2 : Cubieboard 2 Allwinner A20 multi_v7_defconfig cubox : SolidRun Cubox Marvell 88AP510 dove_defconfig multi-trimslice : CompuLab TrimSlice Nvidia Tegra 20 multi_v7_defconfig panda : TI PandaBoard ES TI OMAP4460 omap2plus_defconfig multi-panda : multi_v7_defconfig sama5 : Atmel SAMA5 devboard Atmel SAMA5D35 sama5_defconfig snowball : CALAO Snowball ST-Ericsson A9500 u8500_defconfig multi-snowball : multi_v7_defconfig Last entries of failed logs below: ======================================================================== Board bbb failure log: ------------------------------------------------- Environment size: 4202/131068 bytes U-Boot# setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp' setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp' U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp U-Boot# tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.11.1-56-g71820c1/uImage.omap tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.11.1-56-g71820c1/uImage.omap link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.4; our IP address is 172.16.1.121 Filename '/srv/tftp/queue/v3.11.1-56-g71820c1/uImage.omap'. Load address: 0x80000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################### 625 KiB/s done Bytes transferred = 4090104 (3e68f8 hex) U-Boot# tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.11.1-56-g71820c1/am335x-boneblack.dtb tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.11.1-56-g71820c1/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.4; our IP address is 172.16.1.121 Filename '/srv/tftp/queue/v3.11.1-56-g71820c1/am335x-boneblack.dtb'. Load address: 0x81000000 Loading: * TFTP error: 'File not found' (1) Not retrying... U-Boot# ~$off ======================================================================== Board cubie2 failure log: ------------------------------------------------- setargs=if test -z \\"$root\\"; then if test \\"$bootpath\\" = "boot/"; then root="/dev/mmcblk0p1 rootwait"; else root="/dev/mmcblk0p2 rootwait"; fi; fi; setenv bootargs console=${console} root=${root} loglevel=${loglevel} ${panicarg} ${extraargs} stderr=serial stdin=serial stdout=serial Environment size: 2098/131068 bytes sun7i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i#tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.11.1-56-g71820c1/uImage.multi-1g tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.11.1-56-g71820c1/uImage.multi-1g Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.167 Filename '/srv/tftp/queue/v3.11.1-56-g71820c1/uImage.multi-1g'. Load address: 0x41000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################### 1.7 MiB/s done Bytes transferred = 3588728 (36c278 hex) sun7i#tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.11.1-56-g71820c1/sun7i-a20-cubieboard2.dtb tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.11.1-56-g71820c1/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.167 Filename '/srv/tftp/queue/v3.11.1-56-g71820c1/sun7i-a20-cubieboard2.dtb'. Load address: 0x42000000 Loading: * TFTP error: 'File not found' (1) Not retrying... sun7i#node: cubie2 status: on ~$off ======================================================================== Board multi-snowball failure log: ------------------------------------------------- Environment size: 1705/4092 bytes U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.11.1-56-g71820c1/uImage.multi-snowball tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.11.1-56-g71820c1/uImage.multi-snowball smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.135 Filename '/srv/tftp/queue/v3.11.1-56-g71820c1/uImage.multi-snowball'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ####################################################### done Bytes transferred = 3605450 (3703ca hex) U8500 $ bootm 0x100000 bootm 0x100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3605386 Bytes = 3.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off ======================================================================== Board multi-trimslice failure log: ------------------------------------------------- autoboot=no Environment size: 375/65532 bytes TrimSlice # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw TrimSlice # tftpboot 0x800000 172.16.1.4:/srv/tftp/queue/v3.11.1-56-g71820c1/uImage.multi-trimslice tftpboot 0x800000 172.16.1.4:/srv/tftp/queue/v3.11.1-56-g71820c1/uImage.multi-trimslice Using RTL8169#0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.148 Filename '/srv/tftp/queue/v3.11.1-56-g71820c1/uImage.multi-trimslice'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ####################################################### done Bytes transferred = 3605285 (370325 hex) TrimSlice # bootm 0x800000 bootm 0x800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3605221 Bytes = 3.4 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... ~$off

10 years, 8 months

queue build: 10 warnings 0 failures (queue/v3.11.1-56-g71820c1)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was queue, found at: Local queue of patches applied from http://git.kernel.org/cgit/linux/kernel/git/stable/stable-queue.git Topmost commit: 71820c1 sched/x86: Optimize switch_mm() for multi-threaded workloads Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/queue/v3.11.1-56-g71820c1/ Runtime: 11m 58s Passed: 119 Failed: 0 Warnings: 10 Section mismatches: 8 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 arch/arm/mach-omap2/gpmc.c:1495:4: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' [-Wformat=] 1 drivers/dma/ste_dma40.c:3228:2: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' [-Wformat=] 1 drivers/dma/ste_dma40.c:3582:3: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' [-Wformat=] 1 drivers/dma/ste_dma40.c:3582:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'resource_size_t' [-Wformat=] 1 drivers/dma/ste_dma40.c:3593:5: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'resource_size_t' [-Wformat=] 1 drivers/mmc/host/tmio_mmc_pio.c:798:19: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 drivers/spi/spi-pl022.c:2197:9: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 drivers/tty/serial/imx.c:1134:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 4 drivers/usb/host/xhci.c:3589:17: warning: unused variable 'dev' [-Wunused-variable] 4 drivers/usb/host/xhci.c:3675:17: warning: unused variable 'dev' [-Wunused-variable] Section mismatches: 1 bcm_defconfig WARNING: drivers/built-in.o(.data+0x5a7c): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the function .init.text:sdhci_bcm_kona_probe() 1 bcm_defconfig WARNING: drivers/built-in.o(.data+0x5aa4): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the (unknown reference) .init.data:(unknown) 1 bcm_defconfig WARNING: drivers/mmc/built-in.o(.data+0x4dc): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the function .init.text:sdhci_bcm_kona_probe() 1 bcm_defconfig WARNING: drivers/mmc/built-in.o(.data+0x504): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the (unknown reference) .init.data:(unknown) 1 bcm_defconfig WARNING: drivers/mmc/host/built-in.o(.data+0x0): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the function .init.text:sdhci_bcm_kona_probe() 1 bcm_defconfig WARNING: drivers/mmc/host/built-in.o(.data+0x28): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the (unknown reference) .init.data:(unknown) 1 bcm_defconfig WARNING: vmlinux.o(.data+0xe43c): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the function .init.text:sdhci_bcm_kona_probe() 1 bcm_defconfig WARNING: vmlinux.o(.data+0xe464): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the (unknown reference) .init.data:(unknown)

10 years, 8 months

queue boot: 9 passed 4 failed (queue/v3.11.1-55-g4eae5a0)

by Olof's autobooter

arndale : passed 0:51.91 bbb : FAILED 1:10.74 beaver : passed 0:32.43 multi-beaver : passed 0:30.95 cubie2 : FAILED 0:53.80 cubie : passed 0:43.01 cubox : passed 0:51.04 panda : passed 0:51.66 multi-panda : passed 0:49.06 sama5 : passed 1:39.22 snowball : passed 1:08.57 multi-snowball : FAILED 0:52.71 multi-trimslice : FAILED 0:43.39 Board legend: Board : System SoC Defconfig arndale : InSignal ArndaleBoard Samsung Exynos 5250 exynos_defconfig bbb : BeagleBone Black TI Sitara AM3359 omap2plus_defconfig beaver : Nvidia Beaver Nvidia Tegra 30 tegra_defconfig multi-beaver : multi_v7_defconfig cubie : Cubieboard Allwinner A10 multi_v7_defconfig cubie2 : Cubieboard 2 Allwinner A20 multi_v7_defconfig cubox : SolidRun Cubox Marvell 88AP510 dove_defconfig multi-trimslice : CompuLab TrimSlice Nvidia Tegra 20 multi_v7_defconfig panda : TI PandaBoard ES TI OMAP4460 omap2plus_defconfig multi-panda : multi_v7_defconfig sama5 : Atmel SAMA5 devboard Atmel SAMA5D35 sama5_defconfig snowball : CALAO Snowball ST-Ericsson A9500 u8500_defconfig multi-snowball : multi_v7_defconfig Last entries of failed logs below: ======================================================================== Board bbb failure log: ------------------------------------------------- Environment size: 4202/131068 bytes U-Boot# setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp' setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp' U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp U-Boot# tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.11.1-55-g4eae5a0/uImage.omap tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.11.1-55-g4eae5a0/uImage.omap link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.4; our IP address is 172.16.1.121 Filename '/srv/tftp/queue/v3.11.1-55-g4eae5a0/uImage.omap'. Load address: 0x80000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################### 625 KiB/s done Bytes transferred = 4090096 (3e68f0 hex) U-Boot# tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.11.1-55-g4eae5a0/am335x-boneblack.dtb tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.11.1-55-g4eae5a0/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.4; our IP address is 172.16.1.121 Filename '/srv/tftp/queue/v3.11.1-55-g4eae5a0/am335x-boneblack.dtb'. Load address: 0x81000000 Loading: * TFTP error: 'File not found' (1) Not retrying... U-Boot# ~$off ======================================================================== Board cubie2 failure log: ------------------------------------------------- setargs=if test -z \\"$root\\"; then if test \\"$bootpath\\" = "boot/"; then root="/dev/mmcblk0p1 rootwait"; else root="/dev/mmcblk0p2 rootwait"; fi; fi; setenv bootargs console=${console} root=${root} loglevel=${loglevel} ${panicarg} ${extraargs} stderr=serial stdin=serial stdout=serial Environment size: 2098/131068 bytes sun7i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i#tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.11.1-55-g4eae5a0/uImage.multi-1g tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.11.1-55-g4eae5a0/uImage.multi-1g Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.167 Filename '/srv/tftp/queue/v3.11.1-55-g4eae5a0/uImage.multi-1g'. Load address: 0x41000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################### 1.7 MiB/s done Bytes transferred = 3588728 (36c278 hex) sun7i#tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.11.1-55-g4eae5a0/sun7i-a20-cubieboard2.dtb tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.11.1-55-g4eae5a0/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.167 Filename '/srv/tftp/queue/v3.11.1-55-g4eae5a0/sun7i-a20-cubieboard2.dtb'. Load address: 0x42000000 Loading: * TFTP error: 'File not found' (1) Not retrying... sun7i#node: cubie2 status: on ~$off ======================================================================== Board multi-snowball failure log: ------------------------------------------------- Environment size: 1705/4092 bytes U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.11.1-55-g4eae5a0/uImage.multi-snowball tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.11.1-55-g4eae5a0/uImage.multi-snowball smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.135 Filename '/srv/tftp/queue/v3.11.1-55-g4eae5a0/uImage.multi-snowball'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################T ################################################# ####################################################### done Bytes transferred = 3605450 (3703ca hex) U8500 $ bootm 0x100000 bootm 0x100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3605386 Bytes = 3.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off ======================================================================== Board multi-trimslice failure log: ------------------------------------------------- Connected to trimslice console [channel connected] (~$quit to exit) ~$hardreset Command(trimslice console)> hardreset (user:build) Reset target U-Boot 2010.09-00172-g1c59bc2 (Mar 21 2011 - 10:25:36) TEGRA2 Board: TrimSlice DRAM: 1 GiB SF: Detected W25Q80BL with page size 256, total 1 MiB In: serial Out: serial Err: serial Boot: Spi Net: RTL8169#0 Hit any key to stop autoboot: 5 0 TrimSlice # version version U-Boot 2010.09-00172-g1c59bc2 (Mar 21 2011 - 10:25:36) TrimSlice # usb start usb start (Re)start USB... USB: Tegra ehci init hccr c5008100 and hcor c5008140 hc_length 64 Register 10011 NbrPorts 1 USB EHCI 1.00 scanning bus for devices... 2 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found TrimSlice # setenv autoload no setenv autoload no TrimSlice # node: trimslice status: on dhcp dhcp BOOTP broadcast 1 ~$off

10 years, 8 months

queue build: 10 warnings 0 failures (queue/v3.11.1-55-g4eae5a0)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was queue, found at: Local queue of patches applied from http://git.kernel.org/cgit/linux/kernel/git/stable/stable-queue.git Topmost commit: 4eae5a0 sched/x86: Optimize switch_mm() for multi-threaded workloads Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/queue/v3.11.1-55-g4eae5a0/ Runtime: 38m 29s Passed: 119 Failed: 0 Warnings: 10 Section mismatches: 8 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 arch/arm/mach-omap2/gpmc.c:1495:4: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' [-Wformat=] 1 drivers/dma/ste_dma40.c:3228:2: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' [-Wformat=] 1 drivers/dma/ste_dma40.c:3582:3: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' [-Wformat=] 1 drivers/dma/ste_dma40.c:3582:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'resource_size_t' [-Wformat=] 1 drivers/dma/ste_dma40.c:3593:5: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'resource_size_t' [-Wformat=] 1 drivers/mmc/host/tmio_mmc_pio.c:798:19: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 drivers/spi/spi-pl022.c:2197:9: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 drivers/tty/serial/imx.c:1134:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 4 drivers/usb/host/xhci.c:3589:17: warning: unused variable 'dev' [-Wunused-variable] 4 drivers/usb/host/xhci.c:3675:17: warning: unused variable 'dev' [-Wunused-variable] Section mismatches: 1 bcm_defconfig WARNING: drivers/built-in.o(.data+0x5a7c): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the function .init.text:sdhci_bcm_kona_probe() 1 bcm_defconfig WARNING: drivers/built-in.o(.data+0x5aa4): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the (unknown reference) .init.data:(unknown) 1 bcm_defconfig WARNING: drivers/mmc/built-in.o(.data+0x4dc): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the function .init.text:sdhci_bcm_kona_probe() 1 bcm_defconfig WARNING: drivers/mmc/built-in.o(.data+0x504): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the (unknown reference) .init.data:(unknown) 1 bcm_defconfig WARNING: drivers/mmc/host/built-in.o(.data+0x0): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the function .init.text:sdhci_bcm_kona_probe() 1 bcm_defconfig WARNING: drivers/mmc/host/built-in.o(.data+0x28): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the (unknown reference) .init.data:(unknown) 1 bcm_defconfig WARNING: vmlinux.o(.data+0xe43c): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the function .init.text:sdhci_bcm_kona_probe() 1 bcm_defconfig WARNING: vmlinux.o(.data+0xe464): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the (unknown reference) .init.data:(unknown)

10 years, 8 months

← Newer
1
...
6
7
8
9
10
11
12
...
38
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports September 2013