Kernel-build-reports January 2014

kernel-build-reports@lists.linaro.org

13 participants
419 discussions

mainline build: 11 warnings 0 failures (mainline/v3.13-rc8-27-g2e67c56)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 2e67c56 Merge branch 'akpm' (incoming from Andrew) Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.13-rc8-27-g2e67c56/ Runtime: 12m 43s Passed: 119 Failed: 0 Warnings: 11 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/leds/leds-pwm.c:88:22: warning: unused variable 'node' [-Wunused-variable] 1 drivers/net/ethernet/ti/cpsw.c:2140:2: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/net/ethernet/ti/davinci_cpdma.c:182:3: warning: passing argument 3 of 'dma_alloc_attrs' from incompatible pointer type [enabled by default] 1 drivers/net/ethernet/ti/davinci_cpdma.c:222:25: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/net/ethernet/ti/davinci_cpdma.c:223:8: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 4 has type 'resource_size_t' [-Wformat=] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:123:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] 2 net/netfilter/ipvs/ip_vs_sync.c:1640:8: warning: unused variable 'ret' [-Wunused-variable] Section mismatches:

10 years, 11 months

mainline boot: 28 passed 0 failed (mainline/v3.13-rc8-20-g1a60864)

by Olof's autobooter

Failed boards: Successful boards: apc vt8500_v6_v7_defconfig : passed 1:11.79 arndale exynos_defconfig : passed 0:59.30 bbb omap2plus_defconfig : passed 1:31.56 bbb multi_v7_defconfig : passed 1:21.44 beaver tegra_defconfig : passed 0:52.21 beaver multi_v7_defconfig : passed 0:43.05 capri bcm_defconfig : passed 0:42.97 capri multi_v7_defconfig : passed 0:42.36 cubie sunxi_defconfig : passed 0:50.32 cubie multi_v7_defconfig : passed 0:57.76 cubie2 sunxi_defconfig : passed 0:52.97 cubie2 multi_v7_defconfig : passed 1:06.43 cubie2 multi_lpae_defconfig : passed 0:50.85 cubox dove_defconfig : passed 1:00.67 dalmore tegra_defconfig : passed 1:22.05 dalmore multi_v7_defconfig : passed 1:03.92 dalmore multi_lpae_defconfig : passed 1:00.96 panda omap2plus_defconfig : passed 1:16.59 panda multi_v7_defconfig : passed 1:06.09 sama5 sama5_defconfig : passed 1:52.28 seaboard tegra_defconfig : passed 1:00.59 seaboard multi_v7_defconfig : passed 0:56.99 snow exynos_defconfig : passed 1:17.70 snowball u8500_defconfig : passed 1:24.32 snowball multi_v7_defconfig : passed 1:05.28 trimslice multi_v7_defconfig : passed 0:53.06 wandboard imx_v6_v7_defconfig : passed 0:59.19 wandboard multi_v7_defconfig : passed 0:51.80 Board legend is available at http://arm-soc.lixom.net/boards.html

10 years, 11 months

mainline build: 11 warnings 0 failures (mainline/v3.13-rc8-20-g1a60864)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 1a60864 Merge tag 'md/3.13-fixes' of git://neil.brown.name/md Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.13-rc8-20-g1a60864/ Runtime: 15m 53s Passed: 119 Failed: 0 Warnings: 11 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/leds/leds-pwm.c:88:22: warning: unused variable 'node' [-Wunused-variable] 1 drivers/net/ethernet/ti/cpsw.c:2140:2: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/net/ethernet/ti/davinci_cpdma.c:182:3: warning: passing argument 3 of 'dma_alloc_attrs' from incompatible pointer type [enabled by default] 1 drivers/net/ethernet/ti/davinci_cpdma.c:222:25: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/net/ethernet/ti/davinci_cpdma.c:223:8: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 4 has type 'resource_size_t' [-Wformat=] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:123:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] 2 net/netfilter/ipvs/ip_vs_sync.c:1640:8: warning: unused variable 'ret' [-Wunused-variable] Section mismatches:

10 years, 11 months

next boot: 29 passed 2 failed (next/next-20140115)

by Olof's autobooter

Failed boards: hummingboard multi_v7_defconfig : FAILED 0:25.88 panda multi_v7_defconfig : FAILED 1:32.64 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:17.49 arndale exynos_defconfig : passed 1:06.54 bbb omap2plus_defconfig : passed 1:36.45 bbb multi_v7_defconfig : passed 1:20.66 beaver tegra_defconfig : passed 0:58.12 beaver multi_v7_defconfig : passed 0:49.57 capri bcm_defconfig : passed 0:42.60 capri multi_v7_defconfig : passed 0:42.33 cubie sunxi_defconfig : passed 0:50.37 cubie multi_v7_defconfig : passed 0:50.79 cubie2 sunxi_defconfig : passed 0:49.82 cubie2 multi_v7_defconfig : passed 1:02.56 cubie2 multi_lpae_defconfig : passed 0:51.89 cubox dove_defconfig : passed 1:06.15 dalmore tegra_defconfig : passed 1:17.40 dalmore multi_v7_defconfig : passed 1:18.50 dalmore multi_lpae_defconfig : passed 1:18.67 hummingboard imx_v6_v7_defconfig : warnings 1:17.36 panda omap2plus_defconfig : passed 1:15.41 sama5 sama5_defconfig : passed 1:53.48 seaboard tegra_defconfig : passed 1:02.36 seaboard multi_v7_defconfig : passed 1:04.16 snow exynos_defconfig : passed 1:20.52 snowball u8500_defconfig : passed 1:25.13 snowball multi_v7_defconfig : passed 2:04.54 trimslice tegra_defconfig : passed 0:54.94 trimslice multi_v7_defconfig : passed 1:05.68 wandboard imx_v6_v7_defconfig : warnings 0:56.07 wandboard multi_v7_defconfig : passed 1:01.78 Board legend is available at http://arm-soc.lixom.net/boards.html Board hummingboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.085151] hub 1-0:1.0: 1 port detected [ 1.089802] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.094874] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.099822] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 1.125131] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.131284] hub 2-0:1.0: USB hub found [ 1.135080] hub 2-0:1.0: 1 port detected [ 1.139764] mousedev: PS/2 mouse device common for all mice [ 1.147039] i2c /dev entries driver [ 1.151824] sdhci: Secure Digital Host Controller Interface driver [ 1.158054] sdhci: Copyright(c) Pierre Ossman [ 1.162904] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.169123] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode [ 1.178306] mmc0: no vqmmc regulator found [ 1.225141] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 1.233183] usbcore: registered new interface driver usbhid [ 1.238795] usbhid: USB HID core driver [ 1.249109] TCP: cubic registered [ 1.252466] NET: Registered protocol family 17 [ 1.257129] Key type dns_resolver registered [ 1.261516] Registering SWP/SWPB emulation handler [ 1.271452] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.279767] spear_cpufreq: Invalid cpufreq_tbl [ 1.290600] ALSA device list: [ 1.293777] No soundcards found. [ 1.297950] VFS: Cannot open root device "mmcblk0p2" or unknown-block(0,0): error -6 [ 1.305732] Please append a correct "root=" boot option; here are the available partitions: [ 1.314096] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 1.322370] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.13.0-rc8-next-20140115 #1 [ 1.329889] [<c001584c>] (unwind_backtrace) from [<c00113fc>] (show_stack+0x10/0x14) [ 1.337649] [<c00113fc>] (show_stack) from [<c05884b4>] (dump_stack+0x84/0x94) [ 1.344881] [<c05884b4>] (dump_stack) from [<c05854d4>] (panic+0xa0/0x1f4) [ 1.351773] [<c05854d4>] (panic) from [<c0808048>] (mount_block_root+0x1a0/0x230) [ 1.359267] [<c0808048>] (mount_block_root) from [<c08081e0>] (mount_root+0x108/0x110) [ 1.367194] [<c08081e0>] (mount_root) from [<c0808340>] (prepare_namespace+0x158/0x1a0) [ 1.375208] [<c0808340>] (prepare_namespace) from [<c0807d04>] (kernel_init_freeable+0x1cc/0x1dc) [ 1.384091] [<c0807d04>] (kernel_init_freeable) from [<c0582950>] (kernel_init+0x8/0x120) [ 1.392281] [<c0582950>] (kernel_init) from [<c000e578>] (ret_from_fork+0x14/0x3c) ~$off # PYBOOT: Exception: panic Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.456237] omap_hsmmc 4809c000.mmc: vmmc regulator missing [ 1.462127] omap-dma-engine 4a056000.dma-controller: freeing channel for 61 [ 1.469421] omap-dma-engine 4a056000.dma-controller: freeing channel for 62 [ 1.476776] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.484374] omap-dma-engine 4a056000.dma-controller: allocating channel for 60 [ 1.491973] omap-dma-engine 4a056000.dma-controller: allocating channel for 59 [ 1.499603] omap_hsmmc 480d5000.mmc: vmmc regulator missing [ 1.505462] omap-dma-engine 4a056000.dma-controller: freeing channel for 59 [ 1.512786] omap-dma-engine 4a056000.dma-controller: freeing channel for 60 [ 1.520141] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.527770] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.534942] usbcore: registered new interface driver usbhid [ 1.540802] usbhid: USB HID core driver [ 1.548156] TCP: cubic registered [ 1.551666] NET: Registered protocol family 17 [ 1.556488] Key type dns_resolver registered [ 1.561401] Power Management for TI OMAP4+ devices. [ 1.566558] Power Management for TI OMAP4. [ 1.570861] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.578002] Registering SWP/SWPB emulation handler [ 1.584289] vwl1271: 1800 mV [ 1.588500] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.598266] twl 0-0048: PIH (irq 39) nested IRQs [ 1.604034] twl_rtc rtc.11: Power up reset detected. [ 1.609954] twl_rtc rtc.11: Enabling TWL-RTC [ 1.616882] twl_rtc rtc.11: rtc core: registered rtc.11 as rtc0 [ 1.623748] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.629760] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.635742] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.641723] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.647216] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.652557] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.657562] VDAC: 1800 mV [ 1.657562] VANA: 2100 mV [ 1.664642] VCXIO: 1800 mV [ 1.667602] VUSB: 3300 mV [ 1.671447] V1V8: 1800 mV [ 1.674957] V2V1: 2100 mV ~$off # PYBOOT: Exception: timeout

10 years, 11 months

next build: 6 warnings 3 failures (next/next-20140115)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next, found at: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch) Topmost commit: 82fab9c Add linux-next specific files for 20140115 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next/next-20140115/ Runtime: 38m 59s Passed: 120 Failed: 3 Warnings: 6 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: s5p64x0_defconfig s5pc100_defconfig s5pv210_defconfig ------------------------------------------------------------------------------- Errors: s5p64x0_defconfig: arch/arm/Kconfig:1965:error: recursive dependency detected! arch/arm/plat-samsung/pm-gpio.c:22:31: fatal error: mach/gpio-samsung.h: No such file or directory drivers/gpio/gpio-samsung.c:35:31: fatal error: mach/gpio-samsung.h: No such file or directory s5pc100_defconfig: arch/arm/Kconfig:1965:error: recursive dependency detected! drivers/gpio/gpio-samsung.c:35:31: fatal error: mach/gpio-samsung.h: No such file or directory s5pv210_defconfig: arch/arm/Kconfig:1965:error: recursive dependency detected! arch/arm/plat-samsung/pm-gpio.c:22:31: fatal error: mach/gpio-samsung.h: No such file or directory drivers/gpio/gpio-samsung.c:35:31: fatal error: mach/gpio-samsung.h: No such file or directory Warnings: 1 drivers/usb/host/xhci-plat.c:203:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:211:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) Section mismatches:

10 years, 11 months

arm-soc boot: 31 pass, 1 fail (v3.13-rc5-1169-gfb54a12)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: arm-soc Git describe: v3.13-rc5-1169-gfb54a12 Failed boot tests (console logs at the end) =========================================== omap4-panda-es: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 24.9 sec omap3-beagle-xm PASS: 0 min 54.0 sec am335x-bone PASS: 0 min 26.8 sec omap4-panda PASS: 1 min 10.2 sec omap4-panda-es PASS: 1 min 6.6 sec omap3-tobi,3730storm PASS: 0 min 20.9 sec omap3-tobi,3530overo PASS: 0 min 21.8 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 17.0 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.5 sec imx6q-wandboard PASS: 0 min 16.9 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 12.1 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 22.0 sec armada-370-mirabox PASS: 0 min 20.3 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.9 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 20.4 sec tegra30-beaver PASS: 0 min 23.4 sec am335x-boneblack PASS: 0 min 22.6 sec omap3-beagle-xm PASS: 0 min 44.1 sec sun7i-a20-cubieboard2 PASS: 0 min 13.5 sec armada-370-mirabox PASS: 0 min 21.6 sec omap4-panda PASS: 0 min 52.6 sec omap4-panda-es FAIL: 1 min 48.2 sec armada-xp-openblocks-ax3-4 PASS: 0 min 23.8 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.2 sec am335x-bone PASS: 0 min 24.3 sec imx6q-wandboard PASS: 0 min 16.6 sec omap3-tobi,3730storm PASS: 0 min 24.8 sec imx6dl-wandboard,wand-dual PASS: 0 min 17.6 sec omap3-tobi,3530overo PASS: 0 min 20.8 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 28.3 sec sama5_defconfig --------------- sama5d35ek PASS: 2 min 0.7 sec Console logs for failures ========================= multi_v7_defconfig ------------------ omap4-panda-es: FAIL: last 24 lines of boot log: ------------------------------------------------ [ 1.624114] Registering SWP/SWPB emulation handler [ 1.629974] vwl1271: 1800 mV [ 1.636840] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.646392] twl 0-0048: PIH (irq 39) nested IRQs [ 1.652648] twl_rtc rtc.11: Enabling TWL-RTC [ 1.659515] twl_rtc rtc.11: rtc core: registered rtc.11 as rtc0 [ 1.666320] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.672332] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.678344] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.684326] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.689788] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.695098] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.700134] VDAC: 1800 mV [ 1.700134] VANA: 2100 mV [ 1.707153] VCXIO: 1800 mV [ 1.707153] VUSB: 3300 mV [ 1.713928] V1V8: 1800 mV [ 1.717407] V2V1: 2100 mV [ 1.724609] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 1.816497] usb 1-1: new high-speed USB device number 2 using ehci-omap ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 108.16 seconds. # PYBOOT: Result: FAIL

10 years, 11 months

arm-soc boot: 28 passed 1 failed (arm-soc/v3.13-rc5-1169-gfb54a12)

by Olof's autobooter

Failed boards: panda multi_v7_defconfig : FAILED 1:36.54 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:16.10 arndale exynos_defconfig : passed 1:00.41 bbb omap2plus_defconfig : passed 1:31.81 bbb multi_v7_defconfig : passed 1:24.21 beaver tegra_defconfig : passed 0:52.61 beaver multi_v7_defconfig : passed 0:49.09 capri bcm_defconfig : passed 0:42.31 capri multi_v7_defconfig : passed 0:44.60 cubie sunxi_defconfig : passed 0:48.38 cubie multi_v7_defconfig : passed 0:50.76 cubie2 sunxi_defconfig : passed 0:47.15 cubie2 multi_v7_defconfig : passed 0:57.59 cubie2 multi_lpae_defconfig : passed 0:49.72 cubox dove_defconfig : warnings 1:06.19 dalmore tegra_defconfig : passed 1:22.27 dalmore multi_v7_defconfig : passed 1:15.27 dalmore multi_lpae_defconfig : passed 1:19.68 panda omap2plus_defconfig : passed 1:17.44 sama5 sama5_defconfig : passed 1:50.80 seaboard tegra_defconfig : passed 1:00.68 seaboard multi_v7_defconfig : passed 1:23.41 snow exynos_defconfig : passed 1:18.30 snowball u8500_defconfig : passed 1:27.16 snowball multi_v7_defconfig : passed 2:05.86 trimslice tegra_defconfig : passed 1:01.49 trimslice multi_v7_defconfig : passed 0:59.69 wandboard imx_v6_v7_defconfig : passed 0:53.28 wandboard multi_v7_defconfig : passed 1:05.58 Board legend is available at http://arm-soc.lixom.net/boards.html Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.428131] omap-dma-engine 4a056000.dma-controller: freeing channel for 61 [ 1.435455] omap-dma-engine 4a056000.dma-controller: freeing channel for 62 [ 1.442810] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.450378] omap-dma-engine 4a056000.dma-controller: allocating channel for 60 [ 1.458007] omap-dma-engine 4a056000.dma-controller: allocating channel for 59 [ 1.465637] omap_hsmmc 480d5000.mmc: vmmc regulator missing [ 1.471527] omap-dma-engine 4a056000.dma-controller: freeing channel for 59 [ 1.478851] omap-dma-engine 4a056000.dma-controller: freeing channel for 60 [ 1.486206] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.493865] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.500701] usbcore: registered new interface driver usbhid [ 1.506561] usbhid: USB HID core driver [ 1.513580] TCP: cubic registered [ 1.517089] NET: Registered protocol family 17 [ 1.521911] Key type dns_resolver registered [ 1.526794] Power Management for TI OMAP4+ devices. [ 1.531951] Power Management for TI OMAP4. [ 1.536285] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.543609] Registering SWP/SWPB emulation handler [ 1.549285] vwl1271: 1800 mV [ 1.553527] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.563415] twl 0-0048: PIH (irq 39) nested IRQs [ 1.569030] twl_rtc rtc.11: Power up reset detected. [ 1.574859] twl_rtc rtc.11: Enabling TWL-RTC [ 1.581573] twl_rtc rtc.11: rtc core: registered rtc.11 as rtc0 [ 1.588531] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.594482] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.600494] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.606506] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.611938] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.617279] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.622283] VDAC: 1800 mV [ 1.622283] VANA: 2100 mV [ 1.629302] VCXIO: 1800 mV [ 1.632598] VUSB: 3300 mV [ 1.636077] V1V8: 1800 mV [ 1.639556] V2V1: 2100 mV [ 1.645172] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz ~$off # PYBOOT: Exception: timeout

10 years, 11 months

arm-soc build: 55 warnings 0 failures (arm-soc/v3.13-rc5-1169-gfb54a12)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was arm-soc, found at: http://git.kernel.org/cgit/linux/kernel/git/arm/arm-soc.git (for-next or to-build branch) Topmost commit: fb54a12 Merge branch 'next/dt' into for-next Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/arm-soc/v3.13-rc5-1169-gfb54a12/ Runtime: 17m 4s Passed: 123 Failed: 0 Warnings: 55 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/leds/leds-pwm.c:88:22: warning: unused variable 'node' [-Wunused-variable] 1 drivers/net/ethernet/ti/cpsw.c:2138:2: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/net/ethernet/ti/davinci_cpdma.c:182:3: warning: passing argument 3 of 'dma_alloc_attrs' from incompatible pointer type [enabled by default] 1 drivers/net/ethernet/ti/davinci_cpdma.c:222:25: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/net/ethernet/ti/davinci_cpdma.c:223:8: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 4 has type 'resource_size_t' [-Wformat=] 1 drivers/usb/host/xhci-plat.c:201:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:209:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:123:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] 2 net/netfilter/ipvs/ip_vs_sync.c:1640:8: warning: unused variable 'ret' [-Wunused-variable] 21 drivers/pinctrl/pinconf.c:299:28: warning: unused variable 'ops' [-Wunused-variable] 21 drivers/pinctrl/pinconf.c:346:28: warning: unused variable 'ops' [-Wunused-variable] Section mismatches:

10 years, 11 months

arm-soc boot: 28 passed 1 failed (arm-soc/v3.13-rc5-1141-g2311347)

by Olof's autobooter

Failed boards: panda multi_v7_defconfig : FAILED 1:33.67 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:14.77 arndale exynos_defconfig : passed 1:22.29 bbb omap2plus_defconfig : passed 1:36.41 bbb multi_v7_defconfig : passed 1:21.82 beaver tegra_defconfig : passed 0:54.32 beaver multi_v7_defconfig : passed 0:50.23 capri bcm_defconfig : passed 0:44.32 capri multi_v7_defconfig : passed 0:44.53 cubie sunxi_defconfig : passed 0:50.50 cubie multi_v7_defconfig : passed 0:51.81 cubie2 sunxi_defconfig : passed 0:50.14 cubie2 multi_v7_defconfig : passed 0:56.71 cubie2 multi_lpae_defconfig : passed 0:50.01 cubox dove_defconfig : warnings 1:06.32 dalmore tegra_defconfig : passed 1:21.67 dalmore multi_v7_defconfig : passed 1:16.38 dalmore multi_lpae_defconfig : passed 1:17.61 panda omap2plus_defconfig : passed 1:15.91 sama5 sama5_defconfig : passed 1:49.59 seaboard tegra_defconfig : passed 1:02.93 seaboard multi_v7_defconfig : passed 1:06.36 snow exynos_defconfig : passed 1:18.52 snowball u8500_defconfig : passed 1:23.94 snowball multi_v7_defconfig : passed 2:05.55 trimslice tegra_defconfig : passed 0:54.68 trimslice multi_v7_defconfig : passed 1:02.83 wandboard imx_v6_v7_defconfig : passed 0:59.16 wandboard multi_v7_defconfig : passed 0:58.78 Board legend is available at http://arm-soc.lixom.net/boards.html Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.428375] omap-dma-engine 4a056000.dma-controller: freeing channel for 61 [ 1.435668] omap-dma-engine 4a056000.dma-controller: freeing channel for 62 [ 1.443023] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.450622] omap-dma-engine 4a056000.dma-controller: allocating channel for 60 [ 1.458251] omap-dma-engine 4a056000.dma-controller: allocating channel for 59 [ 1.465850] omap_hsmmc 480d5000.mmc: vmmc regulator missing [ 1.471740] omap-dma-engine 4a056000.dma-controller: freeing channel for 59 [ 1.479064] omap-dma-engine 4a056000.dma-controller: freeing channel for 60 [ 1.486419] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.494110] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.500946] usbcore: registered new interface driver usbhid [ 1.506805] usbhid: USB HID core driver [ 1.513824] TCP: cubic registered [ 1.517333] NET: Registered protocol family 17 [ 1.522186] Key type dns_resolver registered [ 1.527099] Power Management for TI OMAP4+ devices. [ 1.532257] Power Management for TI OMAP4. [ 1.536590] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.543914] Registering SWP/SWPB emulation handler [ 1.549835] vwl1271: 1800 mV [ 1.553833] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.563659] twl 0-0048: PIH (irq 39) nested IRQs [ 1.569274] twl_rtc rtc.11: Power up reset detected. [ 1.575164] twl_rtc rtc.11: Enabling TWL-RTC [ 1.582153] twl_rtc rtc.11: rtc core: registered rtc.11 as rtc0 [ 1.588928] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.594940] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.600952] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.607055] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.612457] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.617828] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.622802] VDAC: 1800 mV [ 1.626373] VANA: 2100 mV [ 1.629821] VCXIO: 1800 mV [ 1.632812] VUSB: 3300 mV [ 1.636627] V1V8: 1800 mV [ 1.640106] V2V1: 2100 mV [ 1.746215] usb 1-1: new high-speed USB device number 2 using ehci-omap ~$off # PYBOOT: Exception: timeout

10 years, 11 months

arm-soc build: 55 warnings 0 failures (arm-soc/v3.13-rc5-1141-g2311347)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was arm-soc, found at: http://git.kernel.org/cgit/linux/kernel/git/arm/arm-soc.git (for-next or to-build branch) Topmost commit: 2311347 Merge branch 'next/cleanup' into for-next Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/arm-soc/v3.13-rc5-1141-g2311347/ Runtime: 15m 15s Passed: 123 Failed: 0 Warnings: 55 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/leds/leds-pwm.c:88:22: warning: unused variable 'node' [-Wunused-variable] 1 drivers/net/ethernet/ti/cpsw.c:2138:2: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/net/ethernet/ti/davinci_cpdma.c:182:3: warning: passing argument 3 of 'dma_alloc_attrs' from incompatible pointer type [enabled by default] 1 drivers/net/ethernet/ti/davinci_cpdma.c:222:25: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/net/ethernet/ti/davinci_cpdma.c:223:8: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 4 has type 'resource_size_t' [-Wformat=] 1 drivers/usb/host/xhci-plat.c:201:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:209:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:123:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] 2 net/netfilter/ipvs/ip_vs_sync.c:1640:8: warning: unused variable 'ret' [-Wunused-variable] 21 drivers/pinctrl/pinconf.c:299:28: warning: unused variable 'ops' [-Wunused-variable] 21 drivers/pinctrl/pinconf.c:346:28: warning: unused variable 'ops' [-Wunused-variable] Section mismatches:

10 years, 11 months

← Newer
1
...
23
24
25
26
27
28
29
...
42
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports January 2014