Kernel-build-reports January 2014

kernel-build-reports@lists.linaro.org

13 participants
419 discussions

arm-soc boot: 28 pass, 6 fail (v3.13-rc5-961-ga69b188)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: arm-soc Git describe: v3.13-rc5-961-ga69b188 Failed boot tests (console logs at the end) =========================================== am335x-boneblack: FAIL: multi_v7_defconfig omap3-beagle-xm: FAIL: multi_v7_defconfig omap4-panda-es: FAIL: multi_v7_defconfig am335x-bone: FAIL: multi_v7_defconfig omap3-tobi,3730storm: FAIL: multi_v7_defconfig omap3-tobi,3530overo: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 27.8 sec omap3-beagle-xm PASS: 0 min 59.9 sec am335x-bone PASS: 0 min 26.6 sec omap4-panda PASS: 1 min 7.5 sec omap4-panda-es PASS: 1 min 9.8 sec omap3-tobi,3730storm PASS: 0 min 24.0 sec omap3-tobi,3530overo PASS: 0 min 21.8 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 19.1 sec imx6dl-wandboard,wand-solo PASS: 0 min 19.3 sec imx6q-wandboard PASS: 0 min 17.7 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 12.0 sec bcm_defconfig ------------- bcm28155-ap PASS: 1 min 20.3 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.8 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 19.6 sec tegra30-beaver PASS: 0 min 24.9 sec am335x-boneblack FAIL: 0 min 30.6 sec omap3-beagle-xm FAIL: 0 min 55.2 sec sun7i-a20-cubieboard2 PASS: 0 min 13.4 sec armada-370-mirabox PASS: 0 min 21.5 sec omap4-panda PASS: 0 min 50.5 sec omap4-panda-es FAIL: 1 min 48.5 sec armada-xp-openblocks-ax3-4 PASS: 0 min 24.0 sec bcm28155-ap PASS: 1 min 4.8 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.2 sec am335x-bone FAIL: 0 min 34.5 sec imx6q-wandboard PASS: 0 min 16.6 sec omap3-tobi,3730storm FAIL: 0 min 28.3 sec imx6dl-wandboard,wand-dual PASS: 0 min 17.6 sec omap3-tobi,3530overo FAIL: 0 min 27.0 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 30.6 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.7 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 22.0 sec armada-370-mirabox PASS: 0 min 20.2 sec Console logs for failures ========================= multi_v7_defconfig ------------------ am335x-boneblack: FAIL: last 24 lines of boot log: -------------------------------------------------- done Bytes transferred = 17911 (45f7 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.176:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U-Boot# bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 9f19b000, end 9f237300 ... OK Using Device Tree in place at 81f00000, end 81f075f6 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 30.65 seconds. # PYBOOT: Result: FAIL omap3-beagle-xm: FAIL: last 24 lines of boot log: ------------------------------------------------- done Bytes transferred = 15577 (3cd9 hex) OMAP3 beagleboard.org # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none OMAP3 beagleboard.org # bootz ${loadaddr} 0x81000000 0x81f00000 bootz ${loadaddr} 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8ff63000, end 8ffff300 ... OK Loading Device Tree to 8ff5c000, end 8ff62cd8 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 55.17 seconds. # PYBOOT: Result: FAIL omap4-panda-es: FAIL: last 24 lines of boot log: ------------------------------------------------ [ 1.535583] reg-fixed-voltage wl12xx_vmmc.10: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_gpio, deferring probe [ 1.548400] platform wl12xx_vmmc.10: Driver reg-fixed-voltage requests probe deferral [ 1.556610] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c1_pins, deferring probe [ 1.568511] platform 48070000.i2c: Driver omap_i2c requests probe deferral [ 1.568542] omap_i2c 48072000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c2_pins, deferring probe [ 1.587554] platform 48072000.i2c: Driver omap_i2c requests probe deferral [ 1.587646] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c3_pins, deferring probe [ 1.606597] platform 48060000.i2c: Driver omap_i2c requests probe deferral [ 1.614105] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c4_pins, deferring probe [ 1.625610] platform 48350000.i2c: Driver omap_i2c requests probe deferral [ 1.633361] omap-dma-engine 4a056000.dma-controller: allocating channel for 62 [ 1.641021] omap-dma-engine 4a056000.dma-controller: allocating channel for 61 [ 1.648651] omap_hsmmc 4809c000.mmc: vmmc regulator missing [ 1.654510] omap-dma-engine 4a056000.dma-controller: freeing channel for 61 [ 1.661834] omap-dma-engine 4a056000.dma-controller: freeing channel for 62 [ 1.669158] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.676879] omap_hsmmc 480d5000.mmc: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_pins, deferring probe [ 1.688751] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.696563] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.696594] spear_cpufreq: Invalid cpufreq_tbl[ 1.866027] usb 1-1: new high-speed USB device number 2 using ehci-omap ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 108.51 seconds. # PYBOOT: Result: FAIL am335x-bone: FAIL: last 24 lines of boot log: --------------------------------------------- done Bytes transferred = 17315 (43a3 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.174:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U-Boot# bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8f19b000, end 8f237300 ... OK Using Device Tree in place at 81f00000, end 81f073a2 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 34.45 seconds. # PYBOOT: Result: FAIL omap3-tobi,3730storm: FAIL: last 24 lines of boot log: ------------------------------------------------------ smc911x: MAC 00:15:c9:28:f0:11 Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'tmp/3730storm-EQA3ga/omap3-tobi.dtb'. Load address: 0x81f00000 Loading: *## 2.1 MiB/s done Bytes transferred = 15191 (3b57 hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo # bootz ${loadaddr} - 0x81f00000 bootz ${loadaddr} - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Device Tree to 8fff9000, end 8ffffb56 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 28.28 seconds. # PYBOOT: Result: FAIL omap3-tobi,3530overo: FAIL: last 24 lines of boot log: ------------------------------------------------------ done Bytes transferred = 15191 (3b57 hex) Overo #printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk debug rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.151:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo # bootz ${loadaddr} 0x81000000 0x81f00000 bootz ${loadaddr} 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8ff63000, end 8ffff300 ... OK Loading Device Tree to 8ff5c000, end 8ff62b56 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 27.04 seconds. # PYBOOT: Result: FAIL

10 years, 11 months

mainline build: 11 warnings 0 failures (mainline/v3.13-rc6-131-g152b734)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 152b734 Merge tag 'gfs2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.13-rc6-131-g152b734/ Runtime: 15m 50s Passed: 119 Failed: 0 Warnings: 11 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/leds/leds-pwm.c:88:22: warning: unused variable 'node' [-Wunused-variable] 1 drivers/net/ethernet/ti/cpsw.c:2140:2: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/net/ethernet/ti/davinci_cpdma.c:182:3: warning: passing argument 3 of 'dma_alloc_attrs' from incompatible pointer type [enabled by default] 1 drivers/net/ethernet/ti/davinci_cpdma.c:222:25: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/net/ethernet/ti/davinci_cpdma.c:223:8: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 4 has type 'resource_size_t' [-Wformat=] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:123:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] 2 net/netfilter/ipvs/ip_vs_sync.c:1640:8: warning: unused variable 'ret' [-Wunused-variable] Section mismatches:

10 years, 11 months

arm-soc boot: 27 passed 2 failed (arm-soc/v3.13-rc5-961-ga69b188)

by Olof's autobooter

Failed boards: bbb multi_v7_defconfig : FAILED 1:22.62 panda multi_v7_defconfig : FAILED 1:36.16 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:16.49 arndale exynos_defconfig : passed 1:03.36 bbb omap2plus_defconfig : passed 1:31.32 beaver tegra_defconfig : passed 0:52.16 beaver multi_v7_defconfig : passed 0:51.51 capri bcm_defconfig : passed 0:42.97 capri multi_v7_defconfig : passed 0:44.73 cubie sunxi_defconfig : passed 0:47.59 cubie multi_v7_defconfig : passed 0:50.77 cubie2 sunxi_defconfig : passed 0:47.01 cubie2 multi_v7_defconfig : passed 1:00.55 cubie2 multi_lpae_defconfig : passed 0:49.83 cubox dove_defconfig : warnings 1:06.10 dalmore tegra_defconfig : passed 1:22.02 dalmore multi_v7_defconfig : passed 1:14.36 dalmore multi_lpae_defconfig : passed 1:20.56 panda omap2plus_defconfig : passed 1:17.33 sama5 sama5_defconfig : passed 1:49.56 seaboard tegra_defconfig : passed 0:59.33 seaboard multi_v7_defconfig : passed 1:04.64 snow exynos_defconfig : passed 1:20.58 snowball u8500_defconfig : passed 1:25.08 snowball multi_v7_defconfig : passed 2:11.54 trimslice tegra_defconfig : passed 0:59.39 trimslice multi_v7_defconfig : passed 1:00.20 wandboard imx_v6_v7_defconfig : passed 0:57.85 wandboard multi_v7_defconfig : passed 1:04.30 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board bbb-multi_v7_defconfig failure log: ------------------------------------------------- TFTP from server 172.16.1.3; our IP address is 172.16.1.121 Filename 'arm-soc/v3.13-rc5-961-ga69b188/multi_v7_defconfig/zImage'. Load address: 0x80200000 Loading: *###############################################node: bbb status: on ################## ################################################################# ################################################################# ################################################################# ##################################### 1.2 MiB/s done Bytes transferred = 4350584 (426278 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x81f00000 arm-soc/v3.13-rc5-961-ga69b188/multi_v7_defconfig/dtbs/am335x-boneblack.dtb tftp 0x81f00000 arm-soc/v3.13-rc5-961-ga69b188/multi_v7_defconfig/dtbs/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.3; our IP address is 172.16.1.121 Filename 'arm-soc/v3.13-rc5-961-ga69b188/multi_v7_defconfig/dtbs/am335x-boneblack.dtb'. Load address: 0x81f00000 Loading: *## 583 KiB/s done Bytes transferred = 17911 (45f7 hex) U-Boot# setenv bootargs console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk setenv bootargs console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk U-Boot# bootz 0x80200000 - 0x81f00000 bootz 0x80200000 - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f075f6 Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.415161] omap-dma-engine 4a056000.dma-controller: freeing channel for 62 [ 1.422515] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.429962] omap_hsmmc 480d5000.mmc: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_pins, deferring probe [ 1.441864] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.449523] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.456359] usbcore: registered new interface driver usbhid [ 1.462188] usbhid: USB HID core driver [ 1.469177] TCP: cubic registered [ 1.472686] NET: Registered protocol family 17 [ 1.477508] Key type dns_resolver registered [ 1.482391] Power Management for TI OMAP4+ devices. [ 1.487579] Power Management for TI OMAP4. [ 1.491882] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.499023] Registering SWP/SWPB emulation handler [ 1.504852] reg-fixed-voltage wl12xx_vmmc.10: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_gpio, deferring probe [ 1.517669] platform wl12xx_vmmc.10: Driver reg-fixed-voltage requests probe deferral [ 1.526275] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c1_pins, deferring probe [ 1.537811] platform 48070000.i2c: Driver omap_i2c requests probe deferral [ 1.545318] omap_i2c 48072000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c2_pins, deferring probe [ 1.556823] platform 48072000.i2c: Driver omap_i2c requests probe deferral [ 1.564331] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c3_pins, deferring probe [ 1.575836] platform 48060000.i2c: Driver omap_i2c requests probe deferral [ 1.583374] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c4_pins, deferring probe [ 1.594879] platform 48350000.i2c: Driver omap_i2c requests probe deferral [ 1.602111] omap-dma-engine 4a056000.dma-controller: allocating channel for 62 [ 1.610321] omap-dma-engine 4a056000.dma-controller: allocating channel for 61 [ 1.616088] omap_hsmmc 4809c000.mmc: vmmc regulator missing [ 1.621856] omap-dma-engine 4a056000.dma-controller: freeing channel for 61 [ 1.631103] omap-dma-engine 4a056000.dma-controller: freeing channel for 62 [ 1.638458] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.646118] omap_hsmmc 480d5000.mmc: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_pins, deferring probe [ 1.658081] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.665710] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.666412] spear_cpufreq: Invalid cpufreq_tbl [ 1.679260] ALSA device list: [ 1.679260] No soundcards found. [ 1.686309] omap_uart 48020000.serial: no wakeirq for uart2 [ 1.686309] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout

10 years, 11 months

arm-soc boot: 0 pass, 32 fail (v3.13-rc5-961-ga69b188)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: arm-soc Git describe: v3.13-rc5-961-ga69b188 Failed boot tests (console logs at the end) =========================================== am335x-boneblack: FAIL: omap2plus_defconfig omap3-beagle-xm: FAIL: omap2plus_defconfig am335x-bone: FAIL: omap2plus_defconfig omap4-panda: FAIL: omap2plus_defconfig omap4-panda-es: FAIL: omap2plus_defconfig omap3-tobi,3730storm: FAIL: omap2plus_defconfig omap3-tobi,3530overo: FAIL: omap2plus_defconfig tegra30-beaver: FAIL: tegra_defconfig imx6dl-wandboard,wand-dual: FAIL: imx_v6_v7_defconfig imx6dl-wandboard,wand-solo: FAIL: imx_v6_v7_defconfig imx6q-wandboard: FAIL: imx_v6_v7_defconfig sun7i-a20-cubieboard2: FAIL: sunxi_defconfig armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig armada-370-mirabox: FAIL: mvebu_defconfig exynos5250-arndale: FAIL: exynos_defconfig ste-snowball: FAIL: multi_v7_defconfig tegra30-beaver: FAIL: multi_v7_defconfig am335x-boneblack: FAIL: multi_v7_defconfig omap3-beagle-xm: FAIL: multi_v7_defconfig sun7i-a20-cubieboard2: FAIL: multi_v7_defconfig armada-370-mirabox: FAIL: multi_v7_defconfig omap4-panda: FAIL: multi_v7_defconfig omap4-panda-es: FAIL: multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig imx6dl-wandboard,wand-solo: FAIL: multi_v7_defconfig am335x-bone: FAIL: multi_v7_defconfig imx6q-wandboard: FAIL: multi_v7_defconfig omap3-tobi,3730storm: FAIL: multi_v7_defconfig imx6dl-wandboard,wand-dual: FAIL: multi_v7_defconfig omap3-tobi,3530overo: FAIL: multi_v7_defconfig ste-snowball: FAIL: u8500_defconfig sama5d35ek: FAIL: sama5_defconfig Console logs for failures ========================= omap2plus_defconfig ------------------- am335x-boneblack: FAIL: last 24 lines of boot log: -------------------------------------------------- Conmux::connect vence.lan:38436: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:38436' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.16 seconds. # PYBOOT: Result: FAIL omap3-beagle-xm: FAIL: last 24 lines of boot log: ------------------------------------------------- Conmux::connect vence.lan:54681: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:54681' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.16 seconds. # PYBOOT: Result: FAIL am335x-bone: FAIL: last 24 lines of boot log: --------------------------------------------- Conmux::connect vence.lan:55467: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:55467' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.16 seconds. # PYBOOT: Result: FAIL omap4-panda: FAIL: last 24 lines of boot log: --------------------------------------------- Conmux::connect vence.lan:59973: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:59973' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.16 seconds. # PYBOOT: Result: FAIL omap4-panda-es: FAIL: last 24 lines of boot log: ------------------------------------------------ Conmux::connect vence.lan:44882: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:44882' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.16 seconds. # PYBOOT: Result: FAIL omap3-tobi,3730storm: FAIL: last 24 lines of boot log: ------------------------------------------------------ Conmux::connect vence.lan:54032: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:54032' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.16 seconds. # PYBOOT: Result: FAIL omap3-tobi,3530overo: FAIL: last 24 lines of boot log: ------------------------------------------------------ Conmux::connect vence.lan:59825: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:59825' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.16 seconds. # PYBOOT: Result: FAIL tegra_defconfig --------------- tegra30-beaver: FAIL: last 24 lines of boot log: ------------------------------------------------ Conmux::connect vence.lan:36761: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:36761' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.16 seconds. # PYBOOT: Result: FAIL imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual: FAIL: last 24 lines of boot log: ------------------------------------------------------------ Conmux::connect vence.lan:51034: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:51034' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.16 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-solo: FAIL: last 24 lines of boot log: ------------------------------------------------------------ Conmux::connect vence.lan:33603: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:33603' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.16 seconds. # PYBOOT: Result: FAIL imx6q-wandboard: FAIL: last 24 lines of boot log: ------------------------------------------------- Conmux::connect vence.lan:35075: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:35075' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.16 seconds. # PYBOOT: Result: FAIL sunxi_defconfig --------------- sun7i-a20-cubieboard2: FAIL: last 24 lines of boot log: ------------------------------------------------------- Conmux::connect vence.lan:55719: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:55719' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.15 seconds. # PYBOOT: Result: FAIL mvebu_defconfig --------------- armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------ Conmux::connect vence.lan:46834: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:46834' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.34 seconds. # PYBOOT: Result: FAIL armada-370-mirabox: FAIL: last 24 lines of boot log: ---------------------------------------------------- Conmux::connect vence.lan:50074: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:50074' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.35 seconds. # PYBOOT: Result: FAIL exynos_defconfig ---------------- exynos5250-arndale: FAIL: last 24 lines of boot log: ---------------------------------------------------- Conmux::connect vence.lan:54387: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:54387' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.16 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ ste-snowball: FAIL: last 24 lines of boot log: ---------------------------------------------- Conmux::connect vence.lan:43582: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:43582' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.41 seconds. # PYBOOT: Result: FAIL tegra30-beaver: FAIL: last 24 lines of boot log: ------------------------------------------------ Conmux::connect vence.lan:36761: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:36761' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.16 seconds. # PYBOOT: Result: FAIL am335x-boneblack: FAIL: last 24 lines of boot log: -------------------------------------------------- Conmux::connect vence.lan:38436: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:38436' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.16 seconds. # PYBOOT: Result: FAIL omap3-beagle-xm: FAIL: last 24 lines of boot log: ------------------------------------------------- Conmux::connect vence.lan:54681: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:54681' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.16 seconds. # PYBOOT: Result: FAIL sun7i-a20-cubieboard2: FAIL: last 24 lines of boot log: ------------------------------------------------------- Conmux::connect vence.lan:55719: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:55719' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.16 seconds. # PYBOOT: Result: FAIL armada-370-mirabox: FAIL: last 24 lines of boot log: ---------------------------------------------------- Conmux::connect vence.lan:50074: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:50074' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.41 seconds. # PYBOOT: Result: FAIL omap4-panda: FAIL: last 24 lines of boot log: --------------------------------------------- Conmux::connect vence.lan:59973: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:59973' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.16 seconds. # PYBOOT: Result: FAIL omap4-panda-es: FAIL: last 24 lines of boot log: ------------------------------------------------ Conmux::connect vence.lan:44882: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:44882' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.16 seconds. # PYBOOT: Result: FAIL armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------ Conmux::connect vence.lan:46834: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:46834' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.40 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-solo: FAIL: last 24 lines of boot log: ------------------------------------------------------------ Conmux::connect vence.lan:33603: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:33603' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.16 seconds. # PYBOOT: Result: FAIL am335x-bone: FAIL: last 24 lines of boot log: --------------------------------------------- Conmux::connect vence.lan:55467: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:55467' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.16 seconds. # PYBOOT: Result: FAIL imx6q-wandboard: FAIL: last 24 lines of boot log: ------------------------------------------------- Conmux::connect vence.lan:35075: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:35075' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.16 seconds. # PYBOOT: Result: FAIL omap3-tobi,3730storm: FAIL: last 24 lines of boot log: ------------------------------------------------------ Conmux::connect vence.lan:54032: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:54032' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.16 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-dual: FAIL: last 24 lines of boot log: ------------------------------------------------------------ Conmux::connect vence.lan:51034: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:51034' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.16 seconds. # PYBOOT: Result: FAIL omap3-tobi,3530overo: FAIL: last 24 lines of boot log: ------------------------------------------------------ Conmux::connect vence.lan:59825: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:59825' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.16 seconds. # PYBOOT: Result: FAIL u8500_defconfig --------------- ste-snowball: FAIL: last 24 lines of boot log: ---------------------------------------------- Conmux::connect vence.lan:43582: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:43582' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.34 seconds. # PYBOOT: Result: FAIL sama5_defconfig --------------- sama5d35ek: FAIL: last 24 lines of boot log: -------------------------------------------- Conmux::connect vence.lan:47642: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:47642' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.29 seconds. # PYBOOT: Result: FAIL

10 years, 11 months

arm-soc boot: 27 passed 2 failed (arm-soc/v3.13-rc5-906-g909ab94)

by Olof's autobooter

Failed boards: bbb multi_v7_defconfig : FAILED 1:18.95 panda multi_v7_defconfig : FAILED 1:34.15 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:16.10 arndale exynos_defconfig : passed 1:00.64 bbb omap2plus_defconfig : passed 1:31.71 beaver tegra_defconfig : passed 0:51.73 beaver multi_v7_defconfig : passed 0:51.54 capri bcm_defconfig : passed 0:42.07 capri multi_v7_defconfig : passed 0:43.98 cubie sunxi_defconfig : passed 0:50.42 cubie multi_v7_defconfig : passed 0:55.78 cubie2 sunxi_defconfig : passed 0:52.48 cubie2 multi_v7_defconfig : passed 1:05.88 cubie2 multi_lpae_defconfig : passed 0:52.71 cubox dove_defconfig : warnings 1:10.05 dalmore tegra_defconfig : passed 1:17.78 dalmore multi_v7_defconfig : passed 1:17.28 dalmore multi_lpae_defconfig : passed 1:16.63 panda omap2plus_defconfig : passed 1:16.69 sama5 sama5_defconfig : passed 1:51.15 seaboard tegra_defconfig : passed 0:59.19 seaboard multi_v7_defconfig : passed 1:20.29 snow exynos_defconfig : passed 1:20.43 snowball u8500_defconfig : passed 1:24.22 snowball multi_v7_defconfig : passed 2:08.63 trimslice tegra_defconfig : passed 0:57.71 trimslice multi_v7_defconfig : passed 1:01.49 wandboard imx_v6_v7_defconfig : passed 1:11.54 wandboard multi_v7_defconfig : passed 1:07.50 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board bbb-multi_v7_defconfig failure log: ------------------------------------------------- TFTP from server 172.16.1.3; our IP address is 172.16.1.121 Filename 'arm-soc/v3.13-rc5-906-g909ab94/multi_v7_defconfig/zImage'. Load address: 0x80200000 Loading: *################################################################# ####################################node: bbb status: on ############################# ################################################################# ################################################################# ##################################### 1.2 MiB/s done Bytes transferred = 4350224 (426110 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x81f00000 arm-soc/v3.13-rc5-906-g909ab94/multi_v7_defconfig/dtbs/am335x-boneblack.dtb tftp 0x81f00000 arm-soc/v3.13-rc5-906-g909ab94/multi_v7_defconfig/dtbs/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.3; our IP address is 172.16.1.121 Filename 'arm-soc/v3.13-rc5-906-g909ab94/multi_v7_defconfig/dtbs/am335x-boneblack.dtb'. Load address: 0x81f00000 Loading: *## 448.2 KiB/s done Bytes transferred = 17911 (45f7 hex) U-Boot# setenv bootargs console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk setenv bootargs console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk U-Boot# bootz 0x80200000 - 0x81f00000 bootz 0x80200000 - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f075f6 Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.422424] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.429840] omap_hsmmc 480d5000.mmc: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_pins, deferring probe [ 1.441741] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.449401] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.456237] usbcore: registered new interface driver usbhid [ 1.462066] usbhid: USB HID core driver [ 1.469085] TCP: cubic registered [ 1.472564] NET: Registered protocol family 17 [ 1.477416] Key type dns_resolver registered [ 1.482299] Power Management for TI OMAP4+ devices. [ 1.487457] Power Management for TI OMAP4. [ 1.491760] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.498901] Registering SWP/SWPB emulation handler [ 1.504730] reg-fixed-voltage wl12xx_vmmc.10: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_gpio, deferring probe [ 1.517547] platform wl12xx_vmmc.10: Driver reg-fixed-voltage requests probe deferral [ 1.526184] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c1_pins, deferring probe [ 1.537689] platform 48070000.i2c: Driver omap_i2c requests probe deferral [ 1.537780] omap_i2c 48072000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c2_pins, deferring probe [ 1.556732] platform 48072000.i2c: Driver omap_i2c requests probe deferral [ 1.556823] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c3_pins, deferring probe [ 1.575744] platform 48060000.i2c: Driver omap_i2c requests probe deferral [ 1.583251] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c4_pins, deferring probe [ 1.594757] platform 48350000.i2c: Driver omap_i2c requests probe deferral [ 1.602508] omap-dma-engine 4a056000.dma-controller: allocating channel for 62 [ 1.610198] omap-dma-engine 4a056000.dma-controller: allocating channel for 61 [ 1.617797] omap_hsmmc 4809c000.mmc: vmmc regulator missing [ 1.617889] omap-dma-engine 4a056000.dma-controller: freeing channel for 61 [ 1.630981] omap-dma-engine 4a056000.dma-controller: freeing channel for 62 [ 1.638336] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.646057] omap_hsmmc 480d5000.mmc: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_pins, deferring probe [ 1.657928] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.665679] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.674377] spear_cpufreq: Invalid cpufreq_tbl [ 1.678985] ALSA device list: [ 1.682373] No soundcards found. [ 1.686401] omap_uart 48020000.serial: no wakeirq for uart2 [ 1.692352] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 1.692352] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout

10 years, 11 months

arm-soc build: 13 warnings 2 failures (arm-soc/v3.13-rc5-961-ga69b188)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was arm-soc, found at: http://git.kernel.org/cgit/linux/kernel/git/arm/arm-soc.git (for-next or to-build branch) Topmost commit: a69b188 Merge branch 'next/soc' into for-next Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/arm-soc/v3.13-rc5-961-ga69b188/ Runtime: 15m 14s Passed: 120 Failed: 2 Warnings: 13 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: koelsch_defconfig lager_defconfig ------------------------------------------------------------------------------- Errors: koelsch_defconfig: arch/arm/mach-shmobile/setup-rcar-gen2.c:21:32: fatal error: linux/clk/shmobile.h: No such file or directory lager_defconfig: arch/arm/mach-shmobile/setup-rcar-gen2.c:21:32: fatal error: linux/clk/shmobile.h: No such file or directory Warnings: 1 drivers/leds/leds-pwm.c:88:22: warning: unused variable 'node' [-Wunused-variable] 1 drivers/net/ethernet/ti/cpsw.c:2138:2: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/net/ethernet/ti/davinci_cpdma.c:182:3: warning: passing argument 3 of 'dma_alloc_attrs' from incompatible pointer type [enabled by default] 1 drivers/net/ethernet/ti/davinci_cpdma.c:222:25: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/net/ethernet/ti/davinci_cpdma.c:223:8: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 4 has type 'resource_size_t' [-Wformat=] 1 drivers/usb/host/xhci-plat.c:201:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:209:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:123:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] 2 net/netfilter/ipvs/ip_vs_sync.c:1640:8: warning: unused variable 'ret' [-Wunused-variable] Section mismatches:

10 years, 11 months

arm-soc build: 13 warnings 2 failures (arm-soc/v3.13-rc5-906-g909ab94)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was arm-soc, found at: http://git.kernel.org/cgit/linux/kernel/git/arm/arm-soc.git (for-next or to-build branch) Topmost commit: 909ab94 Merge branch 'next/drivers' into for-next Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/arm-soc/v3.13-rc5-906-g909ab94/ Runtime: 14m 24s Passed: 120 Failed: 2 Warnings: 13 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: koelsch_defconfig lager_defconfig ------------------------------------------------------------------------------- Errors: koelsch_defconfig: arch/arm/mach-shmobile/setup-rcar-gen2.c:21:32: fatal error: linux/clk/shmobile.h: No such file or directory lager_defconfig: arch/arm/mach-shmobile/setup-rcar-gen2.c:21:32: fatal error: linux/clk/shmobile.h: No such file or directory Warnings: 1 drivers/leds/leds-pwm.c:88:22: warning: unused variable 'node' [-Wunused-variable] 1 drivers/net/ethernet/ti/cpsw.c:2138:2: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/net/ethernet/ti/davinci_cpdma.c:182:3: warning: passing argument 3 of 'dma_alloc_attrs' from incompatible pointer type [enabled by default] 1 drivers/net/ethernet/ti/davinci_cpdma.c:222:25: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/net/ethernet/ti/davinci_cpdma.c:223:8: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 4 has type 'resource_size_t' [-Wformat=] 1 drivers/usb/host/xhci-plat.c:201:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:209:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:123:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] 2 net/netfilter/ipvs/ip_vs_sync.c:1640:8: warning: unused variable 'ret' [-Wunused-variable] Section mismatches:

10 years, 11 months

arm-soc boot: 0 pass, 32 fail (v3.13-rc5-881-g6e1d13f)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: arm-soc Git describe: v3.13-rc5-881-g6e1d13f Failed boot tests (console logs at the end) =========================================== am335x-boneblack: FAIL: omap2plus_defconfig omap3-beagle-xm: FAIL: omap2plus_defconfig am335x-bone: FAIL: omap2plus_defconfig omap4-panda: FAIL: omap2plus_defconfig omap4-panda-es: FAIL: omap2plus_defconfig omap3-tobi,3730storm: FAIL: omap2plus_defconfig omap3-tobi,3530overo: FAIL: omap2plus_defconfig tegra30-beaver: FAIL: tegra_defconfig imx6dl-wandboard,wand-dual: FAIL: imx_v6_v7_defconfig imx6dl-wandboard,wand-solo: FAIL: imx_v6_v7_defconfig imx6q-wandboard: FAIL: imx_v6_v7_defconfig sun7i-a20-cubieboard2: FAIL: sunxi_defconfig armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig armada-370-mirabox: FAIL: mvebu_defconfig exynos5250-arndale: FAIL: exynos_defconfig ste-snowball: FAIL: multi_v7_defconfig tegra30-beaver: FAIL: multi_v7_defconfig am335x-boneblack: FAIL: multi_v7_defconfig omap3-beagle-xm: FAIL: multi_v7_defconfig sun7i-a20-cubieboard2: FAIL: multi_v7_defconfig armada-370-mirabox: FAIL: multi_v7_defconfig omap4-panda: FAIL: multi_v7_defconfig omap4-panda-es: FAIL: multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig imx6dl-wandboard,wand-solo: FAIL: multi_v7_defconfig am335x-bone: FAIL: multi_v7_defconfig imx6q-wandboard: FAIL: multi_v7_defconfig omap3-tobi,3730storm: FAIL: multi_v7_defconfig imx6dl-wandboard,wand-dual: FAIL: multi_v7_defconfig omap3-tobi,3530overo: FAIL: multi_v7_defconfig ste-snowball: FAIL: u8500_defconfig sama5d35ek: FAIL: sama5_defconfig Console logs for failures ========================= omap2plus_defconfig ------------------- am335x-boneblack: FAIL: last 24 lines of boot log: -------------------------------------------------- Conmux::connect vence.lan:38436: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:38436' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.17 seconds. # PYBOOT: Result: FAIL omap3-beagle-xm: FAIL: last 24 lines of boot log: ------------------------------------------------- Conmux::connect vence.lan:54681: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:54681' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.17 seconds. # PYBOOT: Result: FAIL am335x-bone: FAIL: last 24 lines of boot log: --------------------------------------------- Conmux::connect vence.lan:55467: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:55467' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.16 seconds. # PYBOOT: Result: FAIL omap4-panda: FAIL: last 24 lines of boot log: --------------------------------------------- Conmux::connect vence.lan:59973: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:59973' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.15 seconds. # PYBOOT: Result: FAIL omap4-panda-es: FAIL: last 24 lines of boot log: ------------------------------------------------ Conmux::connect vence.lan:44882: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:44882' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.15 seconds. # PYBOOT: Result: FAIL omap3-tobi,3730storm: FAIL: last 24 lines of boot log: ------------------------------------------------------ Conmux::connect vence.lan:54032: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:54032' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.16 seconds. # PYBOOT: Result: FAIL omap3-tobi,3530overo: FAIL: last 24 lines of boot log: ------------------------------------------------------ Conmux::connect vence.lan:59825: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:59825' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.15 seconds. # PYBOOT: Result: FAIL tegra_defconfig --------------- tegra30-beaver: FAIL: last 24 lines of boot log: ------------------------------------------------ Conmux::connect vence.lan:36761: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:36761' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.18 seconds. # PYBOOT: Result: FAIL imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual: FAIL: last 24 lines of boot log: ------------------------------------------------------------ Conmux::connect vence.lan:51034: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:51034' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.15 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-solo: FAIL: last 24 lines of boot log: ------------------------------------------------------------ Conmux::connect vence.lan:33603: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:33603' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.16 seconds. # PYBOOT: Result: FAIL imx6q-wandboard: FAIL: last 24 lines of boot log: ------------------------------------------------- Conmux::connect vence.lan:35075: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:35075' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.15 seconds. # PYBOOT: Result: FAIL sunxi_defconfig --------------- sun7i-a20-cubieboard2: FAIL: last 24 lines of boot log: ------------------------------------------------------- Conmux::connect vence.lan:55719: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:55719' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.16 seconds. # PYBOOT: Result: FAIL mvebu_defconfig --------------- armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------ Conmux::connect vence.lan:46834: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:46834' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.34 seconds. # PYBOOT: Result: FAIL armada-370-mirabox: FAIL: last 24 lines of boot log: ---------------------------------------------------- Conmux::connect vence.lan:50074: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:50074' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.36 seconds. # PYBOOT: Result: FAIL exynos_defconfig ---------------- exynos5250-arndale: FAIL: last 24 lines of boot log: ---------------------------------------------------- Conmux::connect vence.lan:54387: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:54387' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.16 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ ste-snowball: FAIL: last 24 lines of boot log: ---------------------------------------------- Conmux::connect vence.lan:43582: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:43582' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.39 seconds. # PYBOOT: Result: FAIL tegra30-beaver: FAIL: last 24 lines of boot log: ------------------------------------------------ Conmux::connect vence.lan:36761: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:36761' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.15 seconds. # PYBOOT: Result: FAIL am335x-boneblack: FAIL: last 24 lines of boot log: -------------------------------------------------- Conmux::connect vence.lan:38436: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:38436' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.15 seconds. # PYBOOT: Result: FAIL omap3-beagle-xm: FAIL: last 24 lines of boot log: ------------------------------------------------- Conmux::connect vence.lan:54681: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:54681' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.15 seconds. # PYBOOT: Result: FAIL sun7i-a20-cubieboard2: FAIL: last 24 lines of boot log: ------------------------------------------------------- Conmux::connect vence.lan:55719: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:55719' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.16 seconds. # PYBOOT: Result: FAIL armada-370-mirabox: FAIL: last 24 lines of boot log: ---------------------------------------------------- Conmux::connect vence.lan:50074: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:50074' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.42 seconds. # PYBOOT: Result: FAIL omap4-panda: FAIL: last 24 lines of boot log: --------------------------------------------- Conmux::connect vence.lan:59973: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:59973' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.16 seconds. # PYBOOT: Result: FAIL omap4-panda-es: FAIL: last 24 lines of boot log: ------------------------------------------------ Conmux::connect vence.lan:44882: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:44882' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.15 seconds. # PYBOOT: Result: FAIL armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------ Conmux::connect vence.lan:46834: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:46834' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.40 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-solo: FAIL: last 24 lines of boot log: ------------------------------------------------------------ Conmux::connect vence.lan:33603: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:33603' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.15 seconds. # PYBOOT: Result: FAIL am335x-bone: FAIL: last 24 lines of boot log: --------------------------------------------- Conmux::connect vence.lan:55467: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:55467' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.15 seconds. # PYBOOT: Result: FAIL imx6q-wandboard: FAIL: last 24 lines of boot log: ------------------------------------------------- Conmux::connect vence.lan:35075: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:35075' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.15 seconds. # PYBOOT: Result: FAIL omap3-tobi,3730storm: FAIL: last 24 lines of boot log: ------------------------------------------------------ Conmux::connect vence.lan:54032: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:54032' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.16 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-dual: FAIL: last 24 lines of boot log: ------------------------------------------------------------ Conmux::connect vence.lan:51034: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:51034' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.16 seconds. # PYBOOT: Result: FAIL omap3-tobi,3530overo: FAIL: last 24 lines of boot log: ------------------------------------------------------ Conmux::connect vence.lan:59825: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:59825' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.17 seconds. # PYBOOT: Result: FAIL u8500_defconfig --------------- ste-snowball: FAIL: last 24 lines of boot log: ---------------------------------------------- Conmux::connect vence.lan:43582: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:43582' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.35 seconds. # PYBOOT: Result: FAIL sama5_defconfig --------------- sama5d35ek: FAIL: last 24 lines of boot log: -------------------------------------------- Conmux::connect vence.lan:47642: connect failed - IO::Socket::INET: Bad hostname 'vence.lan:47642' ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.28 seconds. # PYBOOT: Result: FAIL

10 years, 11 months

arm-soc boot: 27 passed 2 failed (arm-soc/v3.13-rc5-881-g6e1d13f)

by Olof's autobooter

Failed boards: bbb multi_v7_defconfig : FAILED 1:23.76 panda multi_v7_defconfig : FAILED 1:35.31 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:17.21 arndale exynos_defconfig : passed 1:02.01 bbb omap2plus_defconfig : passed 1:31.73 beaver tegra_defconfig : passed 0:47.82 beaver multi_v7_defconfig : passed 0:48.56 capri bcm_defconfig : passed 0:43.97 capri multi_v7_defconfig : passed 0:44.23 cubie sunxi_defconfig : passed 0:50.60 cubie multi_v7_defconfig : passed 0:56.67 cubie2 sunxi_defconfig : passed 0:52.87 cubie2 multi_v7_defconfig : passed 1:09.51 cubie2 multi_lpae_defconfig : passed 0:54.49 cubox dove_defconfig : warnings 1:02.43 dalmore tegra_defconfig : passed 1:23.43 dalmore multi_v7_defconfig : passed 1:18.78 dalmore multi_lpae_defconfig : passed 1:19.15 panda omap2plus_defconfig : passed 1:16.80 sama5 sama5_defconfig : passed 1:51.09 seaboard tegra_defconfig : passed 1:03.98 seaboard multi_v7_defconfig : passed 1:10.03 snow exynos_defconfig : passed 1:20.13 snowball u8500_defconfig : passed 1:25.67 snowball multi_v7_defconfig : passed 2:06.65 trimslice tegra_defconfig : passed 0:56.66 trimslice multi_v7_defconfig : passed 1:00.57 wandboard imx_v6_v7_defconfig : passed 0:59.52 wandboard multi_v7_defconfig : passed 1:01.03 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board bbb-multi_v7_defconfig failure log: ------------------------------------------------- TFTP from server 172.16.1.3; our IP address is 172.16.1.121 Filename 'arm-soc/v3.13-rc5-881-g6e1d13f/multi_v7_defconfig/zImage'. Load address: 0x80200000 Loading: *##################################################node: bbb status: on ############### ################################################################# ################################################################# ################################################################# ##################################### 1.2 MiB/s done Bytes transferred = 4350216 (426108 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x81f00000 arm-soc/v3.13-rc5-881-g6e1d13f/multi_v7_defconfig/dtbs/am335x-boneblack.dtb tftp 0x81f00000 arm-soc/v3.13-rc5-881-g6e1d13f/multi_v7_defconfig/dtbs/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.3; our IP address is 172.16.1.121 Filename 'arm-soc/v3.13-rc5-881-g6e1d13f/multi_v7_defconfig/dtbs/am335x-boneblack.dtb'. Load address: 0x81f00000 Loading: *## 602.5 KiB/s done Bytes transferred = 17911 (45f7 hex) U-Boot# setenv bootargs console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk setenv bootargs console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk U-Boot# bootz 0x80200000 - 0x81f00000 bootz 0x80200000 - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f075f6 Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.415039] omap-dma-engine 4a056000.dma-controller: freeing channel for 62 [ 1.422393] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.429840] omap_hsmmc 480d5000.mmc: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_pins, deferring probe [ 1.441711] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.449371] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.456207] usbcore: registered new interface driver usbhid [ 1.462066] usbhid: USB HID core driver [ 1.469024] TCP: cubic registered [ 1.472503] NET: Registered protocol family 17 [ 1.477355] Key type dns_resolver registered [ 1.482238] Power Management for TI OMAP4+ devices. [ 1.487396] Power Management for TI OMAP4. [ 1.491699] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.498840] Registering SWP/SWPB emulation handler [ 1.504730] reg-fixed-voltage wl12xx_vmmc.10: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_gpio, deferring probe [ 1.517547] platform wl12xx_vmmc.10: Driver reg-fixed-voltage requests probe deferral [ 1.525909] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c1_pins, deferring probe [ 1.537658] platform 48070000.i2c: Driver omap_i2c requests probe deferral [ 1.537658] omap_i2c 48072000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c2_pins, deferring probe [ 1.556671] platform 48072000.i2c: Driver omap_i2c requests probe deferral [ 1.556671] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c3_pins, deferring probe [ 1.575714] platform 48060000.i2c: Driver omap_i2c requests probe deferral [ 1.583221] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c4_pins, deferring probe [ 1.594726] platform 48350000.i2c: Driver omap_i2c requests probe deferral [ 1.602539] omap-dma-engine 4a056000.dma-controller: allocating channel for 62 [ 1.610137] omap-dma-engine 4a056000.dma-controller: allocating channel for 61 [ 1.617767] omap_hsmmc 4809c000.mmc: vmmc regulator missing [ 1.623626] omap-dma-engine 4a056000.dma-controller: freeing channel for 61 [ 1.630920] omap-dma-engine 4a056000.dma-controller: freeing channel for 62 [ 1.638244] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.638244] omap_hsmmc 480d5000.mmc: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_pins, deferring probe [ 1.657867] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.665649] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.674316] spear_cpufreq: Invalid cpufreq_tbl [ 1.678985] ALSA device list: [ 1.682312] No soundcards found. [ 1.685913] omap_uart 48020000.serial: no wakeirq for uart2 [ 1.692230] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout

10 years, 11 months

arm-soc build: 13 warnings 3 failures (arm-soc/v3.13-rc5-881-g6e1d13f)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was arm-soc, found at: http://git.kernel.org/cgit/linux/kernel/git/arm/arm-soc.git (for-next or to-build branch) Topmost commit: 6e1d13f Merge branch 'fixes' into for-next Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/arm-soc/v3.13-rc5-881-g6e1d13f/ Runtime: 17m 50s Passed: 119 Failed: 3 Warnings: 13 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: koelsch_defconfig lager_defconfig msm_defconfig ------------------------------------------------------------------------------- Errors: koelsch_defconfig: arch/arm/mach-shmobile/setup-rcar-gen2.c:21:32: fatal error: linux/clk/shmobile.h: No such file or directory lager_defconfig: arch/arm/mach-shmobile/setup-rcar-gen2.c:21:32: fatal error: linux/clk/shmobile.h: No such file or directory msm_defconfig: Warnings: 1 drivers/leds/leds-pwm.c:88:22: warning: unused variable 'node' [-Wunused-variable] 1 drivers/net/ethernet/ti/cpsw.c:2138:2: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/net/ethernet/ti/davinci_cpdma.c:182:3: warning: passing argument 3 of 'dma_alloc_attrs' from incompatible pointer type [enabled by default] 1 drivers/net/ethernet/ti/davinci_cpdma.c:222:25: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/net/ethernet/ti/davinci_cpdma.c:223:8: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 4 has type 'resource_size_t' [-Wformat=] 1 drivers/usb/host/xhci-plat.c:201:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:209:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:123:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] 2 net/netfilter/ipvs/ip_vs_sync.c:1640:8: warning: unused variable 'ret' [-Wunused-variable] Section mismatches:

10 years, 11 months

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports January 2014