Kernel-build-reports January 2014

kernel-build-reports@lists.linaro.org

13 participants
419 discussions

mainline boot: 26 passed 0 failed (mainline/v3.13-9318-g30c867e)

by Olof's autobooter

Failed boards: beaver tegra_defconfig : BUILD FAILED dalmore tegra_defconfig : BUILD FAILED seaboard tegra_defconfig : BUILD FAILED trimslice tegra_defconfig : BUILD FAILED Successful boards: apc vt8500_v6_v7_defconfig : passed 1:25.14 arndale exynos_defconfig : passed 1:04.44 bbb multi_v7_defconfig : passed 1:11.02 beaver multi_v7_defconfig : passed 0:49.97 capri bcm_defconfig : passed 0:42.59 capri multi_v7_defconfig : passed 0:42.76 cubie sunxi_defconfig : passed 0:49.95 cubie multi_v7_defconfig : passed 0:51.87 cubie2 sunxi_defconfig : passed 0:50.27 cubie2 multi_v7_defconfig : passed 0:58.53 cubie2 multi_lpae_defconfig : passed 0:48.43 cubox dove_defconfig : warnings 1:11.57 dalmore multi_v7_defconfig : passed 1:04.05 dalmore multi_lpae_defconfig : passed 1:00.78 hummingboard imx_v6_v7_defconfig : passed 1:16.61 hummingboard multi_v7_defconfig : passed 0:55.24 panda omap2plus_defconfig : passed 1:19.97 panda multi_v7_defconfig : passed 1:17.67 sama5 sama5_defconfig : passed 1:57.99 seaboard multi_v7_defconfig : passed 0:53.67 snow exynos_defconfig : passed 1:23.41 snowball u8500_defconfig : passed 1:33.32 snowball multi_v7_defconfig : passed 1:05.19 trimslice multi_v7_defconfig : passed 0:46.53 wandboard imx_v6_v7_defconfig : passed 0:55.46 wandboard multi_v7_defconfig : passed 0:58.63 Board legend is available at http://arm-soc.lixom.net/boards.html

10 years, 10 months

mainline build: 5 warnings 1 failures (mainline/v3.13-9318-g30c867e)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 30c867e Merge tag 'blackfin-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.13-9318-g30c867e/ Runtime: 41m 38s Passed: 122 Failed: 1 Warnings: 5 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: tegra_defconfig ------------------------------------------------------------------------------- Errors: tegra_defconfig: drivers/gpu/drm/tegra/dc.c:1069:2: error: implicit declaration of function 'drm_debugfs_create_files' [-Werror=implicit-function-declaration] drivers/gpu/drm/tegra/dc.c:1091:2: error: implicit declaration of function 'drm_debugfs_remove_files' [-Werror=implicit-function-declaration] drivers/gpu/drm/tegra/hdmi.c:1182:2: error: implicit declaration of function 'drm_debugfs_create_files' [-Werror=implicit-function-declaration] drivers/gpu/drm/tegra/hdmi.c:1204:2: error: implicit declaration of function 'drm_debugfs_remove_files' [-Werror=implicit-function-declaration] Warnings: 1 drivers/gpu/host1x/debug.c:30:14: warning: 'host1x_debug_force_timeout_pid' defined but not used [-Wunused-variable] 1 drivers/gpu/host1x/debug.c:31:12: warning: 'host1x_debug_force_timeout_val' defined but not used [-Wunused-variable] 1 drivers/gpu/host1x/debug.c:32:12: warning: 'host1x_debug_force_timeout_channel' defined but not used [-Wunused-variable] 1 drivers/usb/host/xhci-plat.c:203:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:211:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] Section mismatches:

10 years, 10 months

mainline boot: 31 pass, 5 fail (v3.13-9240-g1329311)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.13-9240-g1329311 Failed boot tests (console logs at the end) =========================================== omap3-tobi,3730storm: FAIL: omap2plus_defconfig armada-370-mirabox: FAIL: multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig omap3-tobi,3730storm: FAIL: multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 25.6 sec omap3-beagle-xm PASS: 1 min 0.7 sec am335x-bone PASS: 0 min 27.5 sec omap4-panda PASS: 1 min 5.4 sec omap4-panda-es PASS: 1 min 14.2 sec omap3-tobi,3730storm FAIL: 1 min 20.5 sec omap3-tobi,3530overo PASS: 0 min 25.9 sec multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 PASS: 0 min 14.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.6 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.5 sec imx6q-wandboard PASS: 0 min 17.3 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 11.7 sec sun4i-a10-cubieboard PASS: 0 min 17.3 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 58.8 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 30.2 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 29.4 sec tegra30-beaver PASS: 0 min 14.3 sec am335x-boneblack PASS: 0 min 22.6 sec omap3-beagle-xm PASS: 0 min 54.1 sec sun7i-a20-cubieboard2 PASS: 0 min 14.0 sec armada-370-mirabox FAIL: 0 min 28.7 sec omap4-panda PASS: 1 min 2.7 sec omap4-panda-es PASS: 1 min 6.7 sec armada-xp-openblocks-ax3-4 FAIL: 0 min 30.3 sec sun4i-a10-cubieboard PASS: 0 min 18.0 sec bcm28155-ap PASS: 1 min 4.2 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.7 sec am335x-bone PASS: 0 min 25.2 sec imx6q-wandboard PASS: 0 min 16.6 sec omap3-tobi,3730storm FAIL: 0 min 25.6 sec imx6dl-wandboard,wand-dual PASS: 0 min 17.4 sec omap3-tobi,3530overo PASS: 0 min 20.7 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 30.7 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.5 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 FAIL: 0 min 20.1 sec armada-370-mirabox PASS: 0 min 20.3 sec Console logs for failures ========================= omap2plus_defconfig ------------------- omap3-tobi,3730storm: FAIL: last 24 lines of boot log: ------------------------------------------------------ [ 5.984558] [<c0092ed4>] (handle_level_irq) from [<c008fb68>] (generic_handle_irq+0x28/0x3c) [ 5.993469] [<c008fb68>] (generic_handle_irq) from [<c000eda8>] (handle_IRQ+0x4c/0xb4) [ 6.001831] [<c000eda8>] (handle_IRQ) from [<c00085b4>] (omap3_intc_handle_irq+0x60/0x74) [ 6.010467] [<c00085b4>] (omap3_intc_handle_irq) from [<c0548b64>] (__irq_svc+0x44/0x5c) [ 6.018981] Exception stack(0xde0efcd0 to 0xde0efd18) [ 6.024322] fcc0: de412480 01002600 fa0b4000 00000000 [ 6.032958] fce0: de0efd2c de0efd3c de412000 00008002 de4558c6 de4558c0 de0efde6 00000000 [ 6.041564] fd00: 00000000 de0efd18 c044de60 c0436eb8 20000113 ffffffff [ 6.048553] [<c0548b64>] (__irq_svc) from [<c0436eb8>] (__mmc_start_req+0x54/0x84) [ 6.056549] [<c0436eb8>] (__mmc_start_req) from [<c0437358>] (mmc_wait_for_cmd+0x58/0x88) [ 6.065185] [<c0437358>] (mmc_wait_for_cmd) from [<c0440e90>] (mmc_io_rw_direct_host+0xa4/0x13c) [ 6.074432] [<c0440e90>] (mmc_io_rw_direct_host) from [<c0441c54>] (sdio_read_cis+0x168/0x298) [ 6.083526] [<c0441c54>] (sdio_read_cis) from [<c0440138>] (mmc_sdio_init_card+0x3e0/0xaa4) [ 6.092346] [<c0440138>] (mmc_sdio_init_card) from [<c0440b04>] (mmc_attach_sdio+0x78/0x360) [ 6.101257] [<c0440b04>] (mmc_attach_sdio) from [<c0439670>] (mmc_rescan+0x260/0x2e8) [ 6.109527] [<c0439670>] (mmc_rescan) from [<c00590b8>] (process_one_work+0x1ac/0x4c4) [ 6.117889] [<c00590b8>] (process_one_work) from [<c0059f50>] (worker_thread+0x114/0x3b4) [ 6.126525] [<c0059f50>] (worker_thread) from [<c005fb44>] (kthread+0xcc/0xe8) [ 6.134155] [<c005fb44>] (kthread) from [<c000e548>] (ret_from_fork+0x14/0x2c) [ 6.141754] ---[ end trace 995ad03cf79ac362 ]--- ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 80.47 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ armada-370-mirabox: FAIL: last 24 lines of boot log: ---------------------------------------------------- Image Name: Linux Created: 2014-01-30 2:06:24 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3691058 Bytes = 3.5 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 kB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 28.74 seconds. # PYBOOT: Result: FAIL armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------ Image Name: Linux Created: 2014-01-30 2:09:26 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3695679 Bytes = 3.5 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 30.27 seconds. # PYBOOT: Result: FAIL omap3-tobi,3730storm: FAIL: last 24 lines of boot log: ------------------------------------------------------ smc911x: MAC 00:15:c9:28:f0:11 Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'tmp/3730storm-KNGtYG/omap3-tobi.dtb'. Load address: 0x81f00000 Loading: *#### 2.3 MiB/s done Bytes transferred = 56692 (dd74 hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.156:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo # bootz ${loadaddr} - 0x81f00000 bootz ${loadaddr} - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Device Tree to 8ffef000, end 8ffffd73 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 25.55 seconds. # PYBOOT: Result: FAIL mvebu_defconfig --------------- armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------ [<c04cdc40>] (kernel_init_freeable) from [<c039fa40>] (kernel_init+0x8/0x120) [<c039fa40>] (kernel_init) from [<c000e278>] (ret_from_fork+0x14/0x3c) Code: 8a000012 ebfff5a8 e2840054 f57ff05b (e1903f9f) ---[ end trace 162027c5641256d6 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.13.0-09240-g1329311 #1 [<c0014824>] (unwind_backtrace) from [<c00110d4>] (show_stack+0x10/0x14) [<c00110d4>] (show_stack) from [<c03a4268>] (dump_stack+0x80/0x90) [<c03a4268>] (dump_stack) from [<c0013be4>] (handle_IPI+0x148/0x170) [<c0013be4>] (handle_IPI) from [<c00085ac>] (armada_370_xp_handle_irq+0xac/0xb0) [<c00085ac>] (armada_370_xp_handle_irq) from [<c0011c00>] (__irq_svc+0x40/0x50) Exception stack(0xee877fa0 to 0xee877fe8) 7fa0: eefe65b8 00000000 000009a4 00000000 ee876000 c05024ac c03ab9c8 ee876000 7fc0: c052ec76 00000001 c052ec76 ee876000 00000000 ee877fe8 c000edec c0055680 7fe0: 60000113 ffffffff [<c0011c00>] (__irq_svc) from [<c0055680>] (cpu_startup_entry+0xf4/0x134) [<c0055680>] (cpu_startup_entry) from [<00008644>] (0x8644) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000054 # PYBOOT: Time: 20.06 seconds. # PYBOOT: Result: FAIL

10 years, 10 months

mainline boot: 25 passed 0 failed (mainline/v3.13-9240-g1329311)

by Olof's autobooter

Failed boards: beaver tegra_defconfig : BUILD FAILED dalmore tegra_defconfig : BUILD FAILED seaboard tegra_defconfig : BUILD FAILED trimslice tegra_defconfig : BUILD FAILED Successful boards: apc vt8500_v6_v7_defconfig : passed 1:22.52 arndale exynos_defconfig : passed 1:00.89 bbb omap2plus_defconfig : passed 1:31.94 bbb multi_v7_defconfig : passed 1:20.12 beaver multi_v7_defconfig : passed 0:44.79 capri bcm_defconfig : passed 0:42.30 capri multi_v7_defconfig : passed 0:42.69 cubie sunxi_defconfig : passed 0:47.96 cubie multi_v7_defconfig : passed 0:49.13 cubie2 sunxi_defconfig : passed 0:47.23 cubie2 multi_v7_defconfig : passed 1:00.19 cubie2 multi_lpae_defconfig : passed 0:47.98 cubox dove_defconfig : warnings 1:11.13 dalmore multi_v7_defconfig : passed 1:18.56 dalmore multi_lpae_defconfig : passed 1:00.68 panda omap2plus_defconfig : passed 1:16.73 panda multi_v7_defconfig : passed 1:12.74 sama5 sama5_defconfig : passed 1:48.52 seaboard multi_v7_defconfig : passed 0:50.41 snow exynos_defconfig : passed 1:23.58 snowball u8500_defconfig : passed 1:37.98 snowball multi_v7_defconfig : passed 1:08.12 trimslice multi_v7_defconfig : passed 0:43.61 wandboard imx_v6_v7_defconfig : passed 0:55.60 wandboard multi_v7_defconfig : passed 0:53.04 Board legend is available at http://arm-soc.lixom.net/boards.html

10 years, 10 months

mainline build: 5 warnings 1 failures (mainline/v3.13-9240-g1329311)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 1329311 Merge branch 'akpm' (patches from Andrew Morton) Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.13-9240-g1329311/ Runtime: 39m 0s Passed: 122 Failed: 1 Warnings: 5 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: tegra_defconfig ------------------------------------------------------------------------------- Errors: tegra_defconfig: drivers/gpu/drm/tegra/dc.c:1069:2: error: implicit declaration of function 'drm_debugfs_create_files' [-Werror=implicit-function-declaration] drivers/gpu/drm/tegra/dc.c:1091:2: error: implicit declaration of function 'drm_debugfs_remove_files' [-Werror=implicit-function-declaration] drivers/gpu/drm/tegra/hdmi.c:1182:2: error: implicit declaration of function 'drm_debugfs_create_files' [-Werror=implicit-function-declaration] drivers/gpu/drm/tegra/hdmi.c:1204:2: error: implicit declaration of function 'drm_debugfs_remove_files' [-Werror=implicit-function-declaration] Warnings: 1 drivers/gpu/host1x/debug.c:30:14: warning: 'host1x_debug_force_timeout_pid' defined but not used [-Wunused-variable] 1 drivers/gpu/host1x/debug.c:31:12: warning: 'host1x_debug_force_timeout_val' defined but not used [-Wunused-variable] 1 drivers/gpu/host1x/debug.c:32:12: warning: 'host1x_debug_force_timeout_channel' defined but not used [-Wunused-variable] 1 drivers/usb/host/xhci-plat.c:203:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:211:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] Section mismatches:

10 years, 10 months

queue boot: 35 pass, 0 fail (v3.12.9-5-gf7fccff)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: queue Git describe: v3.12.9-5-gf7fccff Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 24.8 sec omap3-beagle-xm PASS: 0 min 55.2 sec am335x-bone PASS: 0 min 26.7 sec omap4-panda PASS: 1 min 7.7 sec omap4-panda-es PASS: 1 min 19.8 sec omap3-tobi,3730storm PASS: 0 min 24.4 sec omap3-tobi,3530overo PASS: 0 min 22.2 sec multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 PASS: 0 min 13.3 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 16.9 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.0 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.9 sec imx6q-wandboard PASS: 0 min 16.2 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 58.9 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.7 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 28.3 sec tegra30-beaver PASS: 0 min 16.8 sec am335x-boneblack PASS: 0 min 32.0 sec omap3-beagle-xm PASS: 0 min 57.2 sec sun7i-a20-cubieboard2 PASS: 0 min 13.7 sec armada-370-mirabox PASS: 0 min 20.6 sec omap4-panda PASS: 1 min 1.7 sec omap4-panda-es PASS: 1 min 4.3 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.8 sec sun4i-a10-cubieboard PASS: 0 min 13.4 sec bcm28155-ap PASS: 0 min 59.1 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.1 sec am335x-bone PASS: 0 min 33.7 sec imx6q-wandboard PASS: 0 min 16.4 sec omap3-tobi,3730storm PASS: 0 min 23.1 sec imx6dl-wandboard,wand-dual PASS: 0 min 17.0 sec omap3-tobi,3530overo PASS: 0 min 20.2 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 36.4 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.3 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 22.1 sec armada-370-mirabox PASS: 0 min 20.1 sec

10 years, 10 months

queue boot: 24 passed 2 failed (queue/v3.12.9-5-gf7fccff)

by Olof's autobooter

Failed boards: bbb omap2plus_defconfig : FAILED 1:37.38 bbb multi_v7_defconfig : FAILED 1:32.41 Successful boards: arndale exynos_defconfig : passed 1:11.58 beaver tegra_defconfig : passed 0:56.76 beaver multi_v7_defconfig : passed 0:39.69 capri bcm_defconfig : passed 0:42.39 capri multi_v7_defconfig : passed 0:42.25 cubie multi_v7_defconfig : passed 0:58.49 cubie2 multi_v7_defconfig : passed 0:53.20 cubie2 multi_lpae_defconfig : passed 0:57.26 cubox dove_defconfig : passed 0:55.07 dalmore tegra_defconfig : passed 1:22.08 dalmore multi_v7_defconfig : passed 1:03.41 dalmore multi_lpae_defconfig : passed 1:00.95 panda omap2plus_defconfig : passed 1:15.00 panda multi_v7_defconfig : passed 1:09.45 sama5 sama5_defconfig : passed 1:57.57 seaboard tegra_defconfig : passed 1:02.80 seaboard multi_v7_defconfig : passed 0:54.91 snow exynos_defconfig : passed 1:25.26 snowball u8500_defconfig : passed 2:16.23 snowball multi_v7_defconfig : passed 0:49.92 trimslice tegra_defconfig : passed 0:59.50 trimslice multi_v7_defconfig : passed 0:47.98 wandboard imx_v6_v7_defconfig : passed 0:56.29 wandboard multi_v7_defconfig : passed 0:48.78 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board bbb-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.245225] RPC: Registered tcp transport module. [ 0.245235] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.246011] mop500-uib: failed to get adapter i2c2 [ 0.262394] NFS: Registering the id_resolver key type [ 0.262511] Key type id_resolver registered [ 0.262526] Key type id_legacy registered [ 0.262921] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.262942] io scheduler noop registered [ 0.262954] io scheduler deadline registered [ 0.263203] io scheduler cfq registered (default) [ 0.264053] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 0.342164] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.344041] Serial: IMX driver [ 0.345007] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 0.938028] console [ttyO0] enabled [ 0.942847] serial: Freescale lpuart driver [ 0.947623] [drm] Initialized drm 1.1.0 20060810 [ 0.954575] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.961518] ehci-platform: EHCI generic platform driver [ 0.967147] ehci-omap: OMAP-EHCI Host Controller driver [ 0.972778] ehci-orion: EHCI orion driver [ 0.977092] SPEAr-ehci: EHCI SPEAr driver [ 0.981445] tegra-ehci: Tegra EHCI driver [ 0.986026] usbcore: registered new interface driver usb-storage [ 0.993870] mousedev: PS/2 mouse device common for all mice [ 1.001175] sdhci: Secure Digital Host Controller Interface driver [ 1.007696] sdhci: Copyright(c) Pierre Ossman [ 1.012748] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.019707] usbcore: registered new interface driver usbhid [ 1.025630] usbhid: USB HID core driver [ 1.030118] TCP: cubic registered [ 1.034492] NET: Registered protocol family 10 [ 1.040323] sit: IPv6 over IPv4 tunneling driver [ 1.046277] Key type dns_resolver registered [ 1.051041] Registering SWP/SWPB emulation handler [ 1.058243] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.064336] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.074427] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board bbb-omap2plus_defconfig failure log: ------------------------------------------------- [ 1.825642] i2c /dev entries driver [ 1.829897] Driver for 1-wire Dallas network protocol. [ 1.842413] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 1.854912] of_get_named_gpio_flags exited with status 53 [ 1.860626] of_get_named_gpio_flags exited with status 54 [ 1.866536] of_get_named_gpio_flags exited with status 55 [ 1.872341] of_get_named_gpio_flags exited with status 56 [ 1.878068] of_get_named_gpio_flags exited with status 53 [ 1.886004] of_get_named_gpio_flags exited with status 54 [ 1.892902] of_get_named_gpio_flags exited with status 55 [ 1.899439] of_get_named_gpio_flags exited with status 56 [ 1.908259] ledtrig-cpu: registered to indicate activity on CPUs [ 1.917201] usbcore: registered new interface driver usbhid [ 1.923269] usbhid: USB HID core driver [ 1.929230] oprofile: no performance counters [ 1.937222] oprofile: using timer interrupt. [ 1.942918] TCP: cubic registered [ 1.946422] Initializing XFRM netlink socket [ 1.951056] NET: Registered protocol family 17 [ 1.955943] NET: Registered protocol family 15 [ 1.961241] Key type dns_resolver registered [ 1.965968] ThumbEE CPU extension supported. [ 1.992485] DCDC1: at 1500 mV [ 1.998675] vdd_mpu: 925 <--> 1325 mV at 1100 mV [ 2.007474] vdd_core: 925 <--> 1150 mV at 1100 mV [ 2.015401] LDO1: at 1800 mV [ 2.021265] LDO2: at 3300 mV [ 2.028488] LDO3: 1800 mV [ 2.034362] LDO4: at 3300 mV [ 2.040271] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.046969] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.121932] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 2.128375] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 2.138493] libphy: 4a101000.mdio: probed [ 2.142885] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 [ 2.153098] Random MACID = c6:fc:cc:05:1f:25 [ 2.164151] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 2.178183] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout

10 years, 10 months

queue build: 17 warnings 0 failures (queue/v3.12.9-5-gf7fccff)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was queue, found at: Local queue of patches applied from http://git.kernel.org/cgit/linux/kernel/git/stable/stable-queue.git Topmost commit: f7fccff powerpc/thp: Fix crash on mremap Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/queue/v3.12.9-5-gf7fccff/ Runtime: 34m 7s Passed: 117 Failed: 0 Warnings: 17 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:589:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:599:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1092:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1166:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/cdma_hw.c:57:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/debug_hw.c:175:10: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' [-Wformat=] 1 drivers/tty/serial/imx.c:1542:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:120:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] Section mismatches:

10 years, 10 months

next boot: 13 pass, 24 fail (next-20140129)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: next Git describe: next-20140129 Failed boot tests (console logs at the end) =========================================== omap4-panda: FAIL: omap2plus_defconfig omap4-panda-es: FAIL: omap2plus_defconfig omap3-tobi,3730storm: FAIL: omap2plus_defconfig sun7i-a20-cubieboard2: FAIL: multi_lpae_defconfig tegra30-beaver: FAIL: tegra_defconfig imx6q-wandboard: FAIL: imx_v6_v7_defconfig sun7i-a20-cubieboard2: FAIL: sunxi_defconfig sun4i-a10-cubieboard: FAIL: sunxi_defconfig exynos5250-arndale: FAIL: exynos_defconfig ste-snowball: FAIL: multi_v7_defconfig tegra30-beaver: FAIL: multi_v7_defconfig sun7i-a20-cubieboard2: FAIL: multi_v7_defconfig armada-370-mirabox: FAIL: multi_v7_defconfig omap4-panda: FAIL: multi_v7_defconfig omap4-panda-es: FAIL: multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig sun4i-a10-cubieboard: FAIL: multi_v7_defconfig bcm28155-ap: FAIL: multi_v7_defconfig imx6q-wandboard: FAIL: multi_v7_defconfig omap3-tobi,3730storm: FAIL: multi_v7_defconfig imx6dl-wandboard,wand-dual: FAIL: multi_v7_defconfig ste-snowball: FAIL: u8500_defconfig armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig armada-370-mirabox: FAIL: mvebu_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 25.7 sec omap3-beagle-xm PASS: 1 min 2.7 sec am335x-bone PASS: 0 min 27.7 sec omap4-panda FAIL: 0 min 53.2 sec omap4-panda-es FAIL: 1 min 0.2 sec omap3-tobi,3730storm FAIL: 1 min 18.2 sec omap3-tobi,3530overo PASS: 0 min 23.0 sec multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 FAIL: 0 min 19.9 sec tegra_defconfig --------------- tegra30-beaver FAIL: 0 min 12.1 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.5 sec imx6q-wandboard FAIL: 0 min 21.1 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 FAIL: 0 min 17.8 sec sun4i-a10-cubieboard FAIL: 0 min 22.1 sec bcm_defconfig ------------- bcm28155-ap PASS: 1 min 4.3 sec exynos_defconfig ---------------- exynos5250-arndale FAIL: 0 min 33.9 sec multi_v7_defconfig ------------------ ste-snowball FAIL: 0 min 30.4 sec tegra30-beaver FAIL: 0 min 24.1 sec am335x-boneblack PASS: 0 min 23.6 sec omap3-beagle-xm PASS: 0 min 44.1 sec sun7i-a20-cubieboard2 FAIL: 0 min 19.8 sec armada-370-mirabox FAIL: 0 min 31.6 sec omap4-panda FAIL: 1 min 0.5 sec omap4-panda-es FAIL: 0 min 53.5 sec armada-xp-openblocks-ax3-4 FAIL: 0 min 31.7 sec sun4i-a10-cubieboard FAIL: 0 min 19.5 sec bcm28155-ap FAIL: 16 min 18.1 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.1 sec am335x-bone PASS: 0 min 31.3 sec imx6q-wandboard FAIL: 0 min 20.4 sec omap3-tobi,3730storm FAIL: 0 min 29.5 sec imx6dl-wandboard,wand-dual FAIL: 0 min 22.4 sec omap3-tobi,3530overo PASS: 0 min 21.4 sec u8500_defconfig --------------- ste-snowball FAIL: 0 min 28.3 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.6 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 FAIL: 0 min 31.6 sec armada-370-mirabox FAIL: 0 min 31.6 sec Console logs for failures ========================= omap2plus_defconfig ------------------- omap4-panda: FAIL: last 24 lines of boot log: --------------------------------------------- 8.8 KiB/s done Bytes transferred = 50077 (c39d hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Panda #bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f0f39c Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 53.22 seconds. # PYBOOT: Result: FAIL omap4-panda-es: FAIL: last 24 lines of boot log: ------------------------------------------------ 4.9 KiB/s done Bytes transferred = 50489 (c539 hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.157:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Panda # bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f0f538 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 60.17 seconds. # PYBOOT: Result: FAIL omap3-tobi,3730storm: FAIL: last 24 lines of boot log: ------------------------------------------------------ [ 6.063446] [<c0092fbc>] (handle_level_irq) from [<c008fc50>] (generic_handle_irq+0x28/0x3c) [ 6.072326] [<c008fc50>] (generic_handle_irq) from [<c000eda8>] (handle_IRQ+0x4c/0xb4) [ 6.080688] [<c000eda8>] (handle_IRQ) from [<c00085b4>] (omap3_intc_handle_irq+0x60/0x74) [ 6.089324] [<c00085b4>] (omap3_intc_handle_irq) from [<c054c424>] (__irq_svc+0x44/0x5c) [ 6.097839] Exception stack(0xde0efcd0 to 0xde0efd18) [ 6.103179] fcc0: de312480 01003600 fa0b4000 00000000 [ 6.111816] fce0: de0efd2c de0efd3c de312000 00008002 de4b7746 de4b7740 de0efde6 00000000 [ 6.120422] fd00: 00000000 de0efd18 c044f728 c043879c 20000113 ffffffff [ 6.127410] [<c054c424>] (__irq_svc) from [<c043879c>] (__mmc_start_req+0x54/0x84) [ 6.135406] [<c043879c>] (__mmc_start_req) from [<c0438c3c>] (mmc_wait_for_cmd+0x58/0x88) [ 6.144042] [<c0438c3c>] (mmc_wait_for_cmd) from [<c0442738>] (mmc_io_rw_direct_host+0xa4/0x13c) [ 6.153289] [<c0442738>] (mmc_io_rw_direct_host) from [<c04434fc>] (sdio_read_cis+0x168/0x298) [ 6.162384] [<c04434fc>] (sdio_read_cis) from [<c04419e0>] (mmc_sdio_init_card+0x3e0/0xaa4) [ 6.171203] [<c04419e0>] (mmc_sdio_init_card) from [<c04423ac>] (mmc_attach_sdio+0x78/0x360) [ 6.180084] [<c04423ac>] (mmc_attach_sdio) from [<c043aefc>] (mmc_rescan+0x260/0x2e8) [ 6.188354] [<c043aefc>] (mmc_rescan) from [<c005917c>] (process_one_work+0x1ac/0x4c4) [ 6.196716] [<c005917c>] (process_one_work) from [<c005a014>] (worker_thread+0x114/0x3b4) [ 6.205352] [<c005a014>] (worker_thread) from [<c005fc08>] (kthread+0xcc/0xe8) [ 6.212982] [<c005fc08>] (kthread) from [<c000e548>] (ret_from_fork+0x14/0x2c) [ 6.220581] ---[ end trace b272c118119c9532 ]--- ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 78.17 seconds. # PYBOOT: Result: FAIL multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2: FAIL: last 24 lines of boot log: ------------------------------------------------------- sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x442fe0 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40ffefbb ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 19.89 seconds. # PYBOOT: Result: FAIL tegra_defconfig --------------- tegra30-beaver: FAIL: last 24 lines of boot log: ------------------------------------------------ [ 0.000000] r10: ffffffff r9 : ffffffff r8 : 3fefffc0 [ 0.000000] r7 : ffffffff r6 : 0000001c r5 : 00000040 r4 : 00000000 [ 0.000000] r3 : 00000000 r2 : 00000000 r1 : ffffffdc r0 : 3fefffc0 [ 0.000000] Flags: nzcv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel [ 0.000000] Control: 10c5387d Table: 8000404a DAC: 00000015 [ 0.000000] Process swapper (pid: 0, stack limit = 0xc07cc240) [ 0.000000] Stack: (0xc07cdef4 to 0xc07ce000) [ 0.000000] dee0: c079ca18 ffffffff c001bad8 [ 0.000000] df00: ffffffff 00000000 c06b9a2c c07dfb78 00000000 ffffffff 0000001c c079cbec [ 0.000000] df20: ffffffff c07d43f4 00080800 c0800000 ffff1000 000ae7f5 00001000 00000007 [ 0.000000] df40: 00000200 c07b7000 c07b7000 c07d43c8 c06b9a2c c07dfb78 c07d8e70 c081b680 [ 0.000000] df60: c085920c c078ffa8 ffffffff 10c5387d c07d8e70 c081b540 00000001 ffffffff [ 0.000000] df80: c07cc000 00000000 c07d43c0 00000000 00000000 c0575f70 c06b85ac c081b540 [ 0.000000] dfa0: 00000001 ffffffff c07cc000 00000000 c07d43c0 00000000 00000000 c078d838 [ 0.000000] dfc0: 00000000 00000000 00000000 00000000 00000000 c07bad78 10c5387d c07d440c [ 0.000000] dfe0: c07bad74 c07d8f80 8000406a 412fc099 00000000 80008074 00000000 00000000 [ 0.000000] Code: e3110020 18a0500c 18a0500c e3110010 (18a0500c) [ 0.000000] ---[ end trace 3406ff24bd97382e ]--- [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task! ~$off # PYBOOT: Exception: kernel: Unable to handle kernel paging request at virtual address 3fefffc0 # PYBOOT: Time: 12.11 seconds. # PYBOOT: Result: FAIL imx_v6_v7_defconfig ------------------- imx6q-wandboard: FAIL: last 24 lines of boot log: ------------------------------------------------- Bytes transferred = 25751 (6497 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 ip=192.168.1.163:192.168.1.2::255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x4e5598 ] ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 11009496 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 21.06 seconds. # PYBOOT: Result: FAIL sunxi_defconfig --------------- sun7i-a20-cubieboard2: FAIL: last 24 lines of boot log: ------------------------------------------------------- sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b0600 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40ffefbb ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 17.78 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 24 lines of boot log: ------------------------------------------------------ sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.160:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b0600 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ffa000, end 40fffa74 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 22.15 seconds. # PYBOOT: Result: FAIL exynos_defconfig ---------------- exynos5250-arndale: FAIL: last 24 lines of boot log: ---------------------------------------------------- tftp 0x407c0000 192.168.1.2:tmp/arndale-5f66Ht/exynos5250-arndale.dtb Waiting for Ethernet connection... done. Using asx0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.167 Filename 'tmp/arndale-5f66Ht/exynos5250-arndale.dtb'. Load address: 0x407c0000 Loading: *### done Bytes transferred = 33440 (82a0 hex) ARNDALE5250 # printenv bootargs printenv bootargs bootargs=console=tty0 console=ttySAC2,115200n8 rw root=/dev/mmcblk1p3 rootwait rootfstype=ext4 ip=192.168.1.167:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none ARNDALE5250 # bootz 0x40800000 - 0x407c0000 bootz 0x40800000 - 0x407c0000 ## Flattened Device Tree blob at 407c0000 Booting using the fdt blob at 0x407c0000 Using Device Tree in place at 407c0000, end 407cb29f Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 33.89 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ ste-snowball: FAIL: last 24 lines of boot log: ---------------------------------------------- ################################################################# ############################################## done Bytes transferred = 4481577 (446229 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $ bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4481513 Bytes = 4.3 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 30.39 seconds. # PYBOOT: Result: FAIL tegra30-beaver: FAIL: last 24 lines of boot log: ------------------------------------------------ Bytes transferred = 23808 (5d00 hex) Tegra30 (Beaver) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 debug earlyprintk Tegra30 (Beaver) # bootz 0x81000000 0x82000000 0x83000000 bootz 0x81000000 0x82000000 0x83000000 Kernel image @ 0x81000000 [ 0x000000 - 0x43d730 ] ## Loading init Ramdisk from Legacy Image at 82000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83008cff Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 24.05 seconds. # PYBOOT: Result: FAIL sun7i-a20-cubieboard2: FAIL: last 24 lines of boot log: ------------------------------------------------------- sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x43d730 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40ffefbb ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 19.77 seconds. # PYBOOT: Result: FAIL armada-370-mirabox: FAIL: last 24 lines of boot log: ---------------------------------------------------- Connected to mirabox console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(mirabox console)> hardreset (user:khilman) Reboot mirabox Reboot: mirabox ; ip9258 1 1 : off, sleep, on ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.65 seconds. # PYBOOT: Result: FAIL omap4-panda: FAIL: last 24 lines of boot log: --------------------------------------------- 6.8 KiB/s done Bytes transferred = 50077 (c39d hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Panda # bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f0f39c Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 60.54 seconds. # PYBOOT: Result: FAIL omap4-panda-es: FAIL: last 24 lines of boot log: ------------------------------------------------ 9.8 KiB/s done Bytes transferred = 50489 (c539 hex) Panda #printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.157:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Panda #bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f0f538 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 53.46 seconds. # PYBOOT: Result: FAIL armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------ Connected to obsax3 console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(obsax3 console)> hardreset (user:khilman) Reboot obsax3 Reboot: obsax3 ; ip9258 1 4 : off, sleep, on ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.66 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 24 lines of boot log: ------------------------------------------------------ sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.160:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x43d730 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ffa000, end 40fffa74 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 19.50 seconds. # PYBOOT: Result: FAIL bcm28155-ap: FAIL: last 24 lines of boot log: --------------------------------------------- File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/fastboot.py", line 57, in __call__ _call(self.context, command, ignore_failure, timeout) File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/fastboot.py", line 45, in _call context.run_command(cmd, failok=ignore_failure) File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/context.py", line 153, in run_command rc = subprocess.check_call(command, **output_args) File "/usr/lib/python2.7/subprocess.py", line 511, in check_call raise CalledProcessError(retcode, cmd) CalledProcessError: Command '['nice', 'sh', '-c', u'timeout 600s flock /var/lock/lava-fastboot.lck fastboot -s 1234567890 reboot']' returned non-zero exit status 124 <LAVA_DISPATCHER>2014-01-29 06:59:59 AM INFO: CriticalError <LAVA_DISPATCHER>2014-01-29 06:59:59 AM WARNING: [ACTION-E] boot_linaro_image is finished with error (Failed to boot test image.). ErrorMessage: Failed to boot test image. Lava failed at action boot_linaro_image with error:Failed to boot test image. Traceback (most recent call last): File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/job.py", line 270, in run action.run(**params) File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/actions/boot_control.py", line 109, in run raise CriticalError("Failed to boot test image.") CriticalError: Failed to boot test image. Reboot: capri ; ip9258 1 3 : ['off'] <LAVA_DISPATCHER>2014-01-29 06:59:59 AM INFO: Submitting the test result with parameters = {u'token': '<HIDDEN>', u'stream': u'/anonymous/lboot/', u'server': u'http://khilman@lava.lan/RPC2/'} <LAVA_DISPATCHER>2014-01-29 07:00:00 AM INFO: Dashboard : http://lava.lan/dashboard/permalink/bundle/43529e90eedb303b1f0105f1fa1e35f8… LBOOT: Result: FAIL LBOOT: Time: 978.10 seconds. imx6q-wandboard: FAIL: last 24 lines of boot log: ------------------------------------------------- Bytes transferred = 25751 (6497 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 ip=192.168.1.163:192.168.1.2::255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x43d730 ] ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 11009496 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 20.37 seconds. # PYBOOT: Result: FAIL omap3-tobi,3730storm: FAIL: last 24 lines of boot log: ------------------------------------------------------ smc911x: MAC 00:15:c9:28:f0:11 Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'tmp/3730storm-2Hh3yG/omap3-tobi.dtb'. Load address: 0x81f00000 Loading: *#### 2.3 MiB/s done Bytes transferred = 56692 (dd74 hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.156:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo # bootz ${loadaddr} - 0x81f00000 bootz ${loadaddr} - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Device Tree to 8ffef000, end 8ffffd73 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 29.47 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-dual: FAIL: last 24 lines of boot log: ------------------------------------------------------------ 1.4 MiB/s done Bytes transferred = 24398 (5f4e hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.165:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 11008f4d Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 22.41 seconds. # PYBOOT: Result: FAIL u8500_defconfig --------------- ste-snowball: FAIL: last 24 lines of boot log: ---------------------------------------------- ################################################################# ###### done Bytes transferred = 2939089 (2cd8d1 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $ bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2939025 Bytes = 2.8 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 28.31 seconds. # PYBOOT: Result: FAIL mvebu_defconfig --------------- armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------ Connected to obsax3 console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(obsax3 console)> hardreset (user:khilman) Reboot obsax3 Reboot: obsax3 ; ip9258 1 4 : off, sleep, on ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.57 seconds. # PYBOOT: Result: FAIL armada-370-mirabox: FAIL: last 24 lines of boot log: ---------------------------------------------------- Connected to mirabox console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(mirabox console)> hardreset (user:khilman) Reboot mirabox Reboot: mirabox ; ip9258 1 1 : off, sleep, on ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.58 seconds. # PYBOOT: Result: FAIL

10 years, 10 months

next boot: 7 passed 24 failed (next/next-20140129)

by Olof's autobooter

Failed boards: arndale exynos_defconfig : FAILED 1:25.31 beaver tegra_defconfig : FAILED 0:24.58 beaver multi_v7_defconfig : FAILED 1:02.41 capri multi_v7_defconfig : FAILED 1:02.25 cubie sunxi_defconfig : FAILED 1:02.62 cubie multi_v7_defconfig : FAILED 1:01.57 cubie2 sunxi_defconfig : FAILED 1:00.60 cubie2 multi_v7_defconfig : FAILED 1:03.81 cubie2 multi_lpae_defconfig : FAILED 0:58.88 cubox dove_defconfig : FAILED 1:11.95 dalmore tegra_defconfig : FAILED 0:28.11 dalmore multi_v7_defconfig : FAILED 1:04.21 dalmore multi_lpae_defconfig : FAILED 1:04.41 panda omap2plus_defconfig : FAILED 1:13.99 panda multi_v7_defconfig : FAILED 1:15.30 seaboard tegra_defconfig : FAILED 0:28.54 seaboard multi_v7_defconfig : FAILED 1:04.88 snow exynos_defconfig : FAILED 1:11.53 snowball u8500_defconfig : FAILED 1:20.00 snowball multi_v7_defconfig : FAILED 1:17.66 trimslice tegra_defconfig : FAILED 1:07.32 trimslice multi_v7_defconfig : FAILED 1:03.96 wandboard imx_v6_v7_defconfig : FAILED 1:01.96 wandboard multi_v7_defconfig : FAILED 1:08.74 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:14.29 bbb omap2plus_defconfig : passed 1:35.93 bbb multi_v7_defconfig : passed 1:22.74 capri bcm_defconfig : passed 0:42.27 hummingboard imx_v6_v7_defconfig : warnings 1:18.54 hummingboard multi_v7_defconfig : passed 1:01.55 sama5 sama5_defconfig : passed 1:53.88 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board arndale-exynos_defconfig failure log: ------------------------------------------------- Load address: 0x40800000 Loading: *################################################################# ################################################################# ########################################################### done Bytes transferred = 2762696 (2a27c8 hex) ARNDALE5250 # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 ARNDALE5250 # tftp 0x407c0000 next/next-20140129/exynos_defconfig/dtbs/exynos5250-arndale.dtb tftp 0x407c0000 next/next-20140129/exynos_defconfig/dtbs/exynos5250-arndale.dtb Waiting for Ethernet connection... done. Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.176 Filename 'next/next-20140129/exynos_defconfig/dtbs/exynos5250-arndale.dtb'. Load address: 0x407c0000 Loading: *### done Bytes transferred = 33440 (82a0 hex) ARNDALE5250 # printenv bootargs printenv bootargs bootargs=console=ttySAC2,115200n8 earlyprintk debug root=/dev/mmcblk0p1 rootwait rw ARNDALE5250 # bootm 0x40800000 - 0x407c0000 bootm 0x40800000 - 0x407c0000 ## Booting kernel from Legacy Image at 40800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2762632 Bytes = 2.6 MiB Load Address: 40008000 Entry Point: 40008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 407c0000 Booting using the fdt blob at 0x407c0000 Loading Kernel Image ... OK OK Loading Device Tree to 4fff4000, end 4ffff29f ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board beaver-multi_v7_defconfig failure log: ------------------------------------------------- Tegra30 (Beaver) # tftp 0x82000000 next/next-20140129/multi_v7_defconfig/zImage tftp 0x82000000 next/next-20140129/multi_v7_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.111 Filename 'next/next-20140129/multi_v7_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################################### 3 MiB/s done Bytes transferred = 4446000 (43d730 hex) Tegra30 (Beaver) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra30 (Beaver) # tftp 0x83000000 next/next-20140129/multi_v7_defconfig/dtbs/tegra30-beaver.dtb tftp 0x83000000 next/next-20140129/multi_v7_defconfig/dtbs/tegra30-beaver.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.111 Filename 'next/next-20140129/multi_v7_defconfig/dtbs/tegra30-beaver.dtb'. Load address: 0x83000000 Loading: *## 2.5 MiB/s done Bytes transferred = 23808 (5d00 hex) Tegra30 (Beaver) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 earlyprintk debug root=/dev/mmcblk0p1 rootwait Tegra30 (Beaver) #bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x43d730 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff7000, end 8ffffcff ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board beaver-tegra_defconfig failure log: ------------------------------------------------- [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] free_area_init_node: node 0, pgdat c0819dc0, node_mem_map ed7f0000 [ 0.000000] Normal zone: 1520 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2574 pages used for memmap [ 0.000000] HighMem zone: 329472 pages, LIFO batch:31 [ 0.000000] Unable to handle kernel paging request at virtual address 3fefffc0 [ 0.000000] pgd = c0004000 [ 0.000000] [3fefffc0] *pgd=00000000 [ 0.000000] Internal error: Oops: 805 [#1] PREEMPT SMP ARM [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 3.13.0-next-20140129 #1 [ 0.000000] task: c07d7da0 ti: c07cc000 task.ti: c07cc000 [ 0.000000] PC is at __memzero+0x4c/0x80 [ 0.000000] LR is at 0x0 [ 0.000000] pc : [<c01ffb0c>] lr : [<00000000>] psr: 000001d3 [ 0.000000] sp : c07cdef4 ip : 00000000 fp : 80000200 [ 0.000000] r10: ffffffff r9 : ffffffff r8 : 3fefffc0 [ 0.000000] r7 : ffffffff r6 : 0000001c r5 : 00000040 r4 : 00000000 [ 0.000000] r3 : 00000000 r2 : 00000000 r1 : ffffffdc r0 : 3fefffc0 [ 0.000000] Flags: nzcv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel [ 0.000000] Control: 10c5387d Table: 8000404a DAC: 00000015 [ 0.000000] Process swapper (pid: 0, stack limit = 0xc07cc240) [ 0.000000] Stack: (0xc07cdef4 to 0xc07ce000) [ 0.000000] dee0: c079ca18 ffffffff c001bad8 [ 0.000000] df00: ffffffff 00000000 c06b9a2c c07dfb78 00000000 ffffffff 0000001c c079cbec [ 0.000000] df20: ffffffff c07d43f4 00080800 c0800000 ffff1000 000ae7f5 00001000 00000007 [ 0.000000] df40: 00000200 c07b7000 c07b7000 c07d43c8 c06b9a2c c07dfb78 c07d8e70 c081b680 [ 0.000000] df60: c085920c c078ffa8 ffffffff 10c5387d c07d8e70 c081b540 00000001 ffffffff [ 0.000000] df80: c07cc000 00000000 c07d43c0 00000000 00000000 c0575f70 c06b85ac c081b540 [ 0.000000] dfa0: 00000001 ffffffff c07cc000 00000000 c07d43c0 00000000 00000000 c078d838 [ 0.000000] dfc0: 00000000 00000000 00000000 00000000 00000000 c07bad78 10c5387d c07d440c [ 0.000000] dfe0: c07bad74 c07d8f80 8000406a 412fc099 00000000 80008074 00000000 00000000 [ 0.000000] Code: e3110020 18a0500c 18a0500c e3110010 (18a0500c) [ 0.000000] ---[ end trace 3406ff24bd97382e ]--- [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task! ~$off # PYBOOT: Exception: panic ======================================================================== Board capri-multi_v7_defconfig failure log: ------------------------------------------------- (user:build) Load fastboot kernel GET_DESC ->STRING DESC sending 'kernel' (4341 KB)... ................................................................................ .......................................................OKAY [ 0.940s] writing 'kernel'... downloading of 4446000 bytes finished Flashing Raw Image Writing to partition 'kernel' Writing 'kernOKAY [ 0.814s] finished. total time: 1.754s el' DONE! GET_DESC ->STRING DESC sending 'device-tree' (5 KB)... OKAY [ 0.003s] dowwriting 'device-tree'... nloading of 5720 bytes finished Flashing Raw Image Writing to partition 'device-tree' Writing 'device-tree' DONOKAY [ 0.010s] finished. total time: 0.015s E! GET_DESC ->STRING DESC resuming boot... OKAY [ 0.000s] finished. total time: 0.000s MMC read: dev # 0, block # 72320, count 16384 ... 16384 blocks read: OK MMC read: dev # 0, block # 114688, count 32768 ... 32768 blocks read: OK ## Flattened Device Tree blob at 9e000000 Booting using the fdt blob at 0x9e000000 Using Device Tree in place at 9e000000, end 9e004657 Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie-multi_v7_defconfig failure log: ------------------------------------------------- tftp 0x40008000 next/next-20140129/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.154 Filename 'next/next-20140129/multi_v7_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ######################################################node: cubie status: on ########### ########################################### 2.7 MiB/s done Bytes transferred = 4446000 (43d730 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x41000000 next/next-20140129/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x41000000 next/next-20140129/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.154 Filename 'next/next-20140129/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *# 482.4 KiB/s done Bytes transferred = 10869 (2a75 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x43d730 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ffa000, end 40fffa74 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie-sunxi_defconfig failure log: ------------------------------------------------- DHCP client bound to address 172.16.1.154 sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x40008000 next/next-20140129/sunxi_defconfig/zImage tftp 0x40008000 next/next-20140129/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.154 Filename 'next/next-20140129/sunxi_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################## 2.5 MiB/s done Bytes transferred = 1771008 (1b0600 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x41000000 next/next-20140129/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x41000000 next/next-20140129/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.154 Filename 'next/next-20140129/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *# 392.6 KiB/s done Bytes transferred = 10869 (2a75 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b0600 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ffa000, end 40fffa74 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- sun7i# tftp 0x40008000 next/next-20140129/multi_lpae_defconfig/zImage tftp 0x40008000 next/next-20140129/multi_lpae_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.171 Filename 'next/next-20140129/multi_lpae_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################# 3.7 MiB/s done Bytes transferred = 4468704 (442fe0 hex) sun7i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 next/next-20140129/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 next/next-20140129/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.171 Filename 'next/next-20140129/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *# 542 KiB/s done Bytes transferred = 12220 (2fbc hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x442fe0 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40ffefbb ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- tftp 0x40008000 next/next-20140129/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.171 Filename 'next/next-20140129/multi_v7_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################################### 4 MiB/s done Bytes transferred = 4446000 (43d730 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 next/next-20140129/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 next/next-20140129/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.171 Filename 'next/next-20140129/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *# 662.1 KiB/s done Bytes transferred = 12220 (2fbc hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x43d730 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40ffefbb ... OK Starting kernel ... node: cubie2 status: on ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- DHCP client bound to address 172.16.1.171 sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x40008000 next/next-20140129/sunxi_defconfig/zImage tftp 0x40008000 next/next-20140129/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.171 Filename 'next/next-20140129/sunxi_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################## 4 MiB/s done Bytes transferred = 1771008 (1b0600 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 next/next-20140129/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 next/next-20140129/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.171 Filename 'next/next-20140129/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *# 411.1 KiB/s done Bytes transferred = 12220 (2fbc hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b0600 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40ffefbb ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubox-dove_defconfig failure log: ------------------------------------------------- CuBox>> dhcp dhcp Unknown command 'dhcp' - try 'help' CuBox>> setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 CuBox>> tftp 0x02000000 tmp/cubox-_ShTqL/tmpNth_20-uImage tftp 0x02000000 tmp/cubox-_ShTqL/tmpNth_20-uImage Using egiga0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.183 Filename 'tmp/cubox-_ShTqL/tmpNth_20-uImage'. Load address: 0x2000000 Loading: *################################################################# ################################################################# ############################################################## done Bytes transferred = 2811127 (2ae4f7 hex) CuBox>> setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait debug earlyprintk setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait debug earlyprintk CuBox>> printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait debug earlyprintk CuBox>> bootm 0x02000000 bootm 0x02000000 ## Booting kernel from Legacy Image at 02000000 ... Image Name: Linux Created: 2014-01-29 6:09:26 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2811063 Bytes = 2.7 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK Loading Kernel Image ... node: cubox status: on OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_lpae_defconfig failure log: ------------------------------------------------- Tegra114 (Dalmore) # tftp 0x82000000 next/next-20140129/multi_lpae_defconfig/zImage tftp 0x82000000 next/next-20140129/multi_lpae_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.143 Filename 'next/next-20140129/multi_lpae_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################# 2.8 MiB/s done Bytes transferred = 4468704 (442fe0 hex) Tegra114 (Dalmore) #setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x83000000 next/next-20140129/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb tftp 0x83000000 next/next-20140129/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.143 Filename 'next/next-20140129/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb'. Load address: 0x83000000 Loading: *### 1005.9 KiB/s done Bytes transferred = 34015 (84df hex) Tegra114 (Dalmore) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x442fe0 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff4000, end 8ffff4de ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_v7_defconfig failure log: ------------------------------------------------- Tegra114 (Dalmore) # tftp 0x82000000 next/next-20140129/multi_v7_defconfig/zImage tftp 0x82000000 next/next-20140129/multi_v7_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.143 Filename 'next/next-20140129/multi_v7_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################################### 2.9 MiB/s done Bytes transferred = 4446000 (43d730 hex) Tegra114 (Dalmore) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x83000000 next/next-20140129/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb tftp 0x83000000 next/next-20140129/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.143 Filename 'next/next-20140129/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb'. Load address: 0x83000000 Loading: *### 790 KiB/s done Bytes transferred = 34015 (84df hex) Tegra114 (Dalmore) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x43d730 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff4000, end 8ffff4de ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-tegra_defconfig failure log: ------------------------------------------------- [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] free_area_init_node: node 0, pgdat c0819dc0, node_mem_map ed7f0000 [ 0.000000] Normal zone: 1520 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2574 pages used for memmap [ 0.000000] HighMem zone: 329472 pages, LIFO batch:31 [ 0.000000] Unable to handle kernel paging request at virtual address 3fefffc0 [ 0.000000] pgd = c0004000 [ 0.000000] [3fefffc0] *pgd=00000000 [ 0.000000] Internal error: Oops: 805 [#1] PREEMPT SMP ARM [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 3.13.0-next-20140129 #1 [ 0.000000] task: c07d7da0 ti: c07cc000 task.ti: c07cc000 [ 0.000000] PC is at __memzero+0x4c/0x80 [ 0.000000] LR is at 0x0 [ 0.000000] pc : [<c01ffb0c>] lr : [<00000000>] psr: 000001d3 [ 0.000000] sp : c07cdef4 ip : 00000000 fp : 80000200 [ 0.000000] r10: ffffffff r9 : ffffffff r8 : 3fefffc0 [ 0.000000] r7 : ffffffff r6 : 0000001c r5 : 00000040 r4 : 00000000 [ 0.000000] r3 : 00000000 r2 : 00000000 r1 : ffffffdc r0 : 3fefffc0 [ 0.000000] Flags: nzcv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel [ 0.000000] Control: 10c5387d Table: 8000406a DAC: 00000015 [ 0.000000] Process swapper (pid: 0, stack limit = 0xc07cc240) [ 0.000000] Stack: (0xc07cdef4 to 0xc07ce000) [ 0.000000] dee0: c079ca18 ffffffff c001bad8 [ 0.000000] df00: ffffffff 00000000 c06b9a2c c07dfb78 00000000 ffffffff 0000001c c079cbec [ 0.000000] df20: ffffffff c07d43f4 00080800 c0800000 ffff1000 000ae7f5 00001000 00000007 [ 0.000000] df40: 00000200 c07b7000 c07b7000 c07d43c8 c06b9a2c c07dfb78 c07d8e70 c081b680 [ 0.000000] df60: c085920c c078ffa8 ffffffff 10c5387d c07d8e70 c081b540 00000001 ffffffff [ 0.000000] df80: c07cc000 00000000 c07d43c0 00000000 00000000 c0575f70 c06b85ac c081b540 [ 0.000000] dfa0: 00000001 ffffffff c07cc000 00000000 c07d43c0 00000000 00000000 c078d838 [ 0.000000] dfc0: 00000000 00000000 00000000 00000000 00000000 c07bad78 10c5387d c07d440c [ 0.000000] dfe0: c07bad74 c07d8f80 8000406a 412fc0f2 00000000 80008074 00000000 00000000 [ 0.000000] Code: e3110020 18a0500c 18a0500c e3110010 (18a0500c) [ 0.000000] ---[ end trace 3406ff24bd97382e ]--- [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task! ~$off # PYBOOT: Exception: panic ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- ################################################################# ################################################################# ################################################################# ########################################### done Bytes transferred = 4446064 (43d770 hex) Panda # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Panda # tftp 0x81f00000 next/next-20140129/multi_v7_defconfig/dtbs/omap4-panda-es.dtb tftp 0x81f00000 next/next-20140129/multi_v7_defconfig/dtbs/omap4-panda-es.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.182 Filename 'next/next-20140129/multi_v7_defconfig/dtbs/omap4-panda-es.dtb'. Load address: 0x81f00000 Loading: *#### done Bytes transferred = 50489 (c539 hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk Panda #bootm 0x82000000 - 0x81f00000 bootm 0x82000000 - 0x81f00000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4446000 Bytes = 4.2 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Kernel Image ... OK OK Using Device Tree in place at 81f00000, end 81f0f538 Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board panda-omap2plus_defconfig failure log: ------------------------------------------------- ################################################################# ################################################################# ################################################################# ################################# done Bytes transferred = 4286728 (416908 hex) Panda # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Panda # tftp 0x81f00000 next/next-20140129/omap2plus_defconfig/dtbs/omap4-panda-es.dtb tftp 0x81f00000 next/next-20140129/omap2plus_defconfig/dtbs/omap4-panda-es.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.182 Filename 'next/next-20140129/omap2plus_defconfig/dtbs/omap4-panda-es.dtb'. Load address: 0x81f00000 Loading: *#### done Bytes transferred = 50489 (c539 hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk Panda # bootm 0x82000000 - 0x81f00000 bootm 0x82000000 - 0x81f00000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4286664 Bytes = 4.1 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Kernel Image ... OK OK Using Device Tree in place at 81f00000, end 81f0f538 Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board seaboard-multi_v7_defconfig failure log: ------------------------------------------------- Tegra20 (SeaBoard) # tftp 0x800000 next/next-20140129/multi_v7_defconfig/zImage tftp 0x800000 next/next-20140129/multi_v7_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.101 Filename 'next/next-20140129/multi_v7_defconfig/zImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################################### 2.8 MiB/s done Bytes transferred = 4446000 (43d730 hex) Tegra20 (SeaBoard) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra20 (SeaBoard) # tftp 0x1800000 next/next-20140129/multi_v7_defconfig/dtbs/tegra20-seaboard.dtb tftp 0x1800000 next/next-20140129/multi_v7_defconfig/dtbs/tegra20-seaboard.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.101 Filename 'next/next-20140129/multi_v7_defconfig/dtbs/tegra20-seaboard.dtb'. Load address: 0x1800000 Loading: *## 467.8 KiB/s done Bytes transferred = 25391 (632f hex) Tegra20 (SeaBoard) # printenv bootargs printenv bootargs bootargs=root=/dev/mmcblk0p3 console=ttyS0,115200 debug earlyprintk Tegra20 (SeaBoard) #bootz 0x800000 - 0x1800000 bootz 0x800000 - 0x1800000 Kernel image @ 0x800000 [ 0x000000 - 0x43d730 ] ## Flattened Device Tree blob at 01800000 Booting using the fdt blob at 0x1800000 Loading Device Tree to 0fff6000, end 0ffff32e ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board seaboard-tegra_defconfig failure log: ------------------------------------------------- [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 262144 [ 0.000000] free_area_init_node: node 0, pgdat c0819dc0, node_mem_map edff0000 [ 0.000000] Normal zone: 1520 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 528 pages used for memmap [ 0.000000] HighMem zone: 67584 pages, LIFO batch:15 [ 0.000000] Unable to handle kernel paging request at virtual address ffffffc0 [ 0.000000] pgd = c0004000 [ 0.000000] [ffffffc0] *pgd=2e7f6821, *pte=00000000, *ppte=00000000 [ 0.000000] Internal error: Oops: 817 [#1] PREEMPT SMP ARM [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 3.13.0-next-20140129 #1 [ 0.000000] task: c07d7da0 ti: c07cc000 task.ti: c07cc000 [ 0.000000] PC is at __memzero+0x4c/0x80 [ 0.000000] LR is at 0x0 [ 0.000000] pc : [<c01ffb0c>] lr : [<00000000>] psr: 000001d3 [ 0.000000] sp : c07cdef4 ip : 00000000 fp : 80000200 [ 0.000000] r10: ffffffff r9 : ffffffff r8 : ffffffc0 [ 0.000000] r7 : ffffffff r6 : 0000001c r5 : 00000040 r4 : 00000000 [ 0.000000] r3 : 00000000 r2 : 00000000 r1 : ffffffdc r0 : ffffffc0 [ 0.000000] Flags: nzcv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel [ 0.000000] Control: 10c5387d Table: 0000404a DAC: 00000015 [ 0.000000] Process swapper (pid: 0, stack limit = 0xc07cc240) [ 0.000000] Stack: (0xc07cdef4 to 0xc07ce000) [ 0.000000] dee0: c079ca18 ffffffff c001bad8 [ 0.000000] df00: ffffffff 00000000 c06b9a2c c07dfb78 00000000 ffffffff 0000001c c079cbec [ 0.000000] df20: ffffffff c07d43f4 00000800 c0800000 ffff1000 0002e7f5 00001000 00000007 [ 0.000000] df40: 00000200 c07b7000 c07b7000 c07d43c8 c06b9a2c c07dfb78 c07d8e70 c081b680 [ 0.000000] df60: c085920c c078ffa8 ffffffff 10c5387d c07d8e70 c081b540 00000001 ffffffff [ 0.000000] df80: c07cc000 00000000 c07d43c0 00000000 00000000 c0575f70 c06b85ac c081b540 [ 0.000000] dfa0: 00000001 ffffffff c07cc000 00000000 c07d43c0 00000000 00000000 c078d838 [ 0.000000] dfc0: 00000000 00000000 00000000 00000000 00000000 c07bad78 10c5387d c07d440c [ 0.000000] dfe0: c07bad74 c07d8f80 0000406a 411fc090 00000000 00008074 00000000 00000000 [ 0.000000] Code: e3110020 18a0500c 18a0500c e3110010 (18a0500c) [ 0.000000] ---[ end trace 3406ff24bd97382e ]--- [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task! ~$off # PYBOOT: Exception: panic ======================================================================== Board snow-exynos_defconfig failure log: ------------------------------------------------- OK Loading Device Tree to 5fff0000, end 5ffff7f8 ... OK Starting kernel ... Timer summary in microseconds: Mark Elapsed Stage 0 0 reset 100,000 100,000 spl_start 1,681,368 1,581,368 board_init_f 1,731,191 49,823 board_init_r 1,733,396 2,205 board_init 1,864,104 130,708 board_init_done 1,946,394 82,290 id=64 1,951,815 5,421 main_loop 3,884,833 1,933,018 usb_start 8,565,476 4,680,643 tftp_start 8,565,493 17 id=80 8,565,495 2 eth_start 12,395,530 3,830,035 id=81 12,395,615 85 id=82 12,395,620 5 id=84 12,395,621 1 tftp_done 19,471,657 7,076,036 bootm_start 19,471,665 8 id=1 19,551,620 79,955 id=2 19,551,639 19 id=3 20,333,425 781,786 id=4 20,333,427 2 id=5 20,333,439 12 id=6 21,056,779 723,340 id=7 21,056,782 3 id=8 21,056,796 14 id=15 21,625,163 568,367 start_kernel Accumulated time: 154,039 lcd Stashed 27 records ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.138 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x00100000 tmp/snowball-vMsK4z/tmpxI4asV-uImage tftp 0x00100000 tmp/snowball-vMsK4z/tmpxI4asV-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.138 Filename 'tmp/snowball-vMsK4z/tmpxI4asV-uImage'. Load address: 0x100000 Loading: *#####################T ############################################ ################################################################# ################################################################# ########################T ######################################### ############################################## done Bytes transferred = 4481577 (446229 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4481513 Bytes = 4.3 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.138 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x00100000 tmp/snowball-qn5NCV/tmp7K_b9N-uImage tftp 0x00100000 tmp/snowball-qn5NCV/tmp7K_b9N-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.138 Filename 'tmp/snowball-qn5NCV/tmp7K_b9N-uImage'. Load address: 0x100000 Loading: *#############################################################node: snowball status: on #### ################################################################# ################################################################# ###### done Bytes transferred = 2939089 (2cd8d1 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2939025 Bytes = 2.8 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board trimslice-multi_v7_defconfig failure log: ------------------------------------------------- Tegra20 (TrimSlice) # tftp 0x800000 next/next-20140129/multi_v7_defconfig/zImage tftp 0x800000 next/next-20140129/multi_v7_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.129 Filename 'next/next-20140129/multi_v7_defconfig/zImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################################### 2.9 MiB/s done Bytes transferred = 4446000 (43d730 hex) Tegra20 (TrimSlice) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra20 (TrimSlice) # tftp 0x1800000 next/next-20140129/multi_v7_defconfig/dtbs/tegra20-trimslice.dtb tftp 0x1800000 next/next-20140129/multi_v7_defconfig/dtbs/tegra20-trimslice.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.129 Filename 'next/next-20140129/multi_v7_defconfig/dtbs/tegra20-trimslice.dtb'. Load address: 0x1800000 Loading: *## 940.4 KiB/s done Bytes transferred = 20236 (4f0c hex) Tegra20 (TrimSlice) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw Tegra20 (TrimSlice) # bootz 0x800000 - 0x1800000 bootz 0x800000 - 0x1800000 Kernel image @ 0x800000 [ 0x000000 - 0x43d730 ] ## Flattened Device Tree blob at 01800000 Booting using the fdt blob at 0x1800000 Loading Device Tree to 0fff8000, end 0fffff0b ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board trimslice-tegra_defconfig failure log: ------------------------------------------------- tftp 0x800000 next/next-20140129/tegra_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.129 Filename 'next/next-20140129/tegra_defconfig/zImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################### 2.8 MiB/s done Bytes transferred = 4169368 (3f9e98 hex) Tegra20 (TrimSlice) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra20 (TrimSlice) # tftp 0x1800000 next/next-20140129/tegra_defconfig/dtbs/tegra20-trimslice.dtb tftp 0x1800000 next/next-20140129/tegra_defconfig/dtbs/tegra20-trimslice.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.129 Filename 'next/next-20140129/tegra_defconfig/dtbs/tegra20-trimslice.dtb'. Load address: 0x1800000 Loading: *## 581.1 KiB/s done Bytes transferred = 20236 (4f0c hex) Tegra20 (TrimSlice) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw Tegra20 (TrimSlice) # bootz 0x800000 - 0x1800000 bootz 0x800000 - 0x1800000 Kernel image @ 0x800000 [ 0x000000 - 0x3f9e98 ] ## Flattened Device Tree blob at 01800000 Booting using the fdt blob at 0x1800000 Loading Device Tree to 0fff8000, end 0fffff0b ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-imx_v6_v7_defconfig failure log: ------------------------------------------------- tftp 0x10800000 next/next-20140129/imx_v6_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.172 Filename 'next/next-20140129/imx_v6_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ######################### 5.8 MiB/s done Bytes transferred = 5133720 (4e5598 hex) => setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 => tftp 0x11000000 next/next-20140129/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb tftp 0x11000000 next/next-20140129/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.172 Filename 'next/next-20140129/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb'. Load address: 0x11000000 Loading: *## 1.4 MiB/s done Bytes transferred = 25751 (6497 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x4e5598 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 11009496 Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-multi_v7_defconfig failure log: ------------------------------------------------- tftp 0x10800000 next/next-20140129/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.172 Filename 'next/next-20140129/multi_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################################### 6.3 MiB/s done Bytes transferred = 4446000 (43d730 hex) => setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 => tftp 0x11000000 next/next-20140129/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb tftp 0x11000000 next/next-20140129/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.172 Filename 'next/next-20140129/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb'. Load address: 0x11000000 Loading: *## 571.3 KiB/s done Bytes transferred = 25751 (6497 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => bootz 0x10800000 - 0x11000000 bootz node: wandboard status: on 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x43d730 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 11009496 Starting kernel ... ~$off # PYBOOT: Exception: timeout

10 years, 10 months

← Newer
1
2
3
4
5
6
7
8
9
...
42
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports January 2014