Kernel-build-reports March 2014

kernel-build-reports@lists.linaro.org

15 participants
336 discussions

next boot: 26 passed 7 failed (next/next-20140313)

by Olof's autobooter

Failed boards: cubie sunxi_defconfig : FAILED 1:02.87 cubie multi_v7_defconfig : FAILED 1:01.99 cubie2 sunxi_defconfig : FAILED 1:00.76 cubie2 multi_v7_defconfig : FAILED 0:59.91 cubie2 multi_lpae_defconfig : FAILED 0:58.95 cubox dove_defconfig : BUILD FAILED snow exynos_defconfig : FAILED 2:05.41 snowball multi_v7_defconfig : FAILED 1:14.11 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:14.54 arndale exynos_defconfig : warnings 1:10.51 bbb omap2plus_defconfig : passed 1:37.75 bbb multi_v7_defconfig : passed 1:22.79 beaver tegra_defconfig : warnings 0:57.14 beaver multi_v7_defconfig : passed 0:51.47 capri bcm_defconfig : passed 0:45.14 capri multi_v7_defconfig : passed 0:44.49 dalmore tegra_defconfig : warnings 1:20.62 dalmore multi_v7_defconfig : passed 1:20.60 dalmore multi_lpae_defconfig : passed 1:15.69 hummingboard imx_v6_v7_defconfig : passed 1:20.58 hummingboard multi_v7_defconfig : passed 1:05.32 omap5uevm omap2plus_defconfig : warnings 1:13.98 omap5uevm multi_v7_defconfig : warnings 1:36.37 omap5uevm multi_lpae_defconfig : warnings 1:35.94 panda omap2plus_defconfig : warnings 1:16.06 panda multi_v7_defconfig : passed 1:21.75 sama5 sama5_defconfig : passed 1:53.72 seaboard tegra_defconfig : warnings 1:07.78 seaboard multi_v7_defconfig : passed 1:12.48 snowball u8500_defconfig : passed 2:18.72 trimslice tegra_defconfig : warnings 1:01.04 trimslice multi_v7_defconfig : passed 0:59.60 wandboard imx_v6_v7_defconfig : warnings 0:54.12 wandboard multi_v7_defconfig : passed 0:57.67 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie-multi_v7_defconfig failure log: ------------------------------------------------- sun4i#tftp 0x40008000 next/next-20140313/multi_v7_defconfig/zImage tftp 0x40008000 next/next-20140313/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'next/next-20140313/multi_v7_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################### 2.7 MiB/s done Bytes transferred = 4558248 (458da8 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x41000000 next/next-20140313/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x41000000 next/next-20140313/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'next/next-20140313/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *# 439.5 KiB/s done Bytes transferred = 12614 (3146 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x458da8 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fff145 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie-sunxi_defconfig failure log: ------------------------------------------------- DHCP client bound to address 172.16.1.140 sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x40008000 next/next-20140313/sunxi_defconfig/zImage tftp 0x40008000 next/next-20140313/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'next/next-20140313/sunxi_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ########################################################## 2.8 MiB/s done Bytes transferred = 1793056 (1b5c20 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x41000000 next/next-20140313/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x41000000 next/next-20140313/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'next/next-20140313/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *# 2.4 MiB/s done Bytes transferred = 12614 (3146 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b5c20 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fff145 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- sun7i# tftp 0x40008000 next/next-20140313/multi_lpae_defconfig/zImage tftp 0x40008000 next/next-20140313/multi_lpae_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'next/next-20140313/multi_lpae_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 3.6 MiB/s done Bytes transferred = 4583152 (45eef0 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 next/next-20140313/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 next/next-20140313/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'next/next-20140313/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 761.7 KiB/s done Bytes transferred = 15603 (3cf3 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x45eef0 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffcf2 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- tftp 0x40008000 next/next-20140313/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'next/next-20140313/multi_v7_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################### 3.9 MiB/s done Bytes transferred = 4558248 (458da8 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 next/next-20140313/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 next/next-20140313/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'next/next-20140313/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 543.9 KiB/s done Bytes transferred = 15603 (3cf3 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x458da8 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffcf2 ... OK Starting kernel ... node: cubie2 status: on ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- DHCP client bound to address 172.16.1.156 sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x40008000 next/next-20140313/sunxi_defconfig/zImage tftp 0x40008000 next/next-20140313/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'next/next-20140313/sunxi_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ########################################################## 3.6 MiB/s done Bytes transferred = 1793056 (1b5c20 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 next/next-20140313/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 next/next-20140313/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'next/next-20140313/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 3 MiB/s done Bytes transferred = 15603 (3cf3 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b5c20 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffcf2 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board snow-exynos_defconfig failure log: ------------------------------------------------- nux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 2925.520099] JBD2: Spotted dirty metadata buffer (dev = mmcblk0p3, blocknr = 0). There's a risk of filesystem corruption in case of system crash. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0/48:f8:b3:2b:2b:68 Sending on LPF/eth0/48:f8:b3:2b:2b:68 Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 [ 2926.500918] asix 1-1:1.0 eth0: link down [ 2928.165669] asix 1-1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPACK from 172.16.1.1 bound to 172.16.1.185 -- renewal in 2963 seconds. [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. INIT: Entering runlevel: 2 [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting web server: apache2apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting periodic command scheduler: cron[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting system message bus: dbus[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Loading cpufreq kernel modules...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone (none). [....] Starting OpenBSD Secure Shell server: sshd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] CPUFreq Utilities: Setting ondemand CPUFreq governor...disabled, governor not available...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. Debian GNU/Linux 7.0 snow ttySAC3 snow login: [ 2962.840947] EXT4-fs error (device mmcblk0p3): ext4_mb_generate_buddy:756: group 3, 25739 clusters in bitmap, 25761 in gd; block bitmap corrupt. [ 2962.856188] EXT4-fs error (device mmcblk0p3): ext4_mb_generate_buddy:756: group 2, 1390 clusters in bitmap, 1392 in gd; block bitmap corrupt. ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.124 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x00100000 tmp/snowball-9G7XrL/tmpuGcodt-uImage tftp 0x00100000 tmp/snowball-9G7XrL/tmpuGcodt-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.124 Filename 'tmp/snowball-9G7XrL/tmpuGcodt-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ###################################################### done Bytes transferred = 4599561 (462f09 hex) U8500 $printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4599497 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout

10 years, 3 months

next build: 77 warnings 7 failures (next/next-20140313)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next, found at: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch) Topmost commit: af911c6 Add linux-next specific files for 20140313 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next/next-20140313/ Runtime: 42m 23s Passed: 118 Failed: 7 Warnings: 77 Section mismatches: 38 ------------------------------------------------------------------------------- Failed defconfigs: dove_defconfig kirkwood_defconfig multi_v5_defconfig mv78xx0_defconfig mvebu_v5_defconfig mvebu_v7_defconfig orion5x_defconfig ------------------------------------------------------------------------------- Errors: dove_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:913: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:893: undefined reference to `reset_control_assert' kirkwood_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:913: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:893: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:760: undefined reference to `devm_reset_control_get' drivers/i2c/busses/i2c-mv64xxx.c:767: undefined reference to `reset_control_deassert' multi_v5_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:913: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:893: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:760: undefined reference to `devm_reset_control_get' drivers/i2c/busses/i2c-mv64xxx.c:767: undefined reference to `reset_control_deassert' mv78xx0_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:913: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:893: undefined reference to `reset_control_assert' mvebu_v5_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:913: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:893: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:760: undefined reference to `devm_reset_control_get' drivers/i2c/busses/i2c-mv64xxx.c:767: undefined reference to `reset_control_deassert' mvebu_v7_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:913: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:893: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:760: undefined reference to `devm_reset_control_get' drivers/i2c/busses/i2c-mv64xxx.c:767: undefined reference to `reset_control_deassert' orion5x_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:913: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:893: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:760: undefined reference to `devm_reset_control_get' drivers/i2c/busses/i2c-mv64xxx.c:767: undefined reference to `reset_control_deassert' Warnings: 1 drivers/irqchip/irq-bcm2835.c:201:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 1 drivers/irqchip/irq-bcm2835.c:99:9: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 1 drivers/irqchip/irq-clps711x.c:78:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 1 drivers/irqchip/irq-moxart.c:48:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 3 drivers/irqchip/irq-mmp.c:199:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 3 drivers/irqchip/irq-mmp.c:212:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 3 drivers/irqchip/irq-orion.c:35:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 3 drivers/irqchip/irq-sirfsoc.c:51:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 3 drivers/irqchip/irq-sun4i.c:140:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 3 drivers/irqchip/irq-sun4i.c:39:70: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 3 drivers/irqchip/irq-vt8500.c:183:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 5 drivers/irqchip/irq-armada-370-xp.c:415:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 13 drivers/irqchip/irq-vic.c:244:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 28 drivers/irqchip/irq-gic.c:283:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1ba0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x5232c): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x523f0): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x524b4): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 multi_lpae_defconfig WARNING: drivers/clk/built-in.o(.data+0xbc94): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 multi_lpae_defconfig WARNING: drivers/clk/built-in.o(.data+0xbd58): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 multi_lpae_defconfig WARNING: drivers/clk/built-in.o(.data+0xbe1c): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 multi_lpae_defconfig WARNING: drivers/clk/socfpga/built-in.o(.data+0x184): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 multi_lpae_defconfig WARNING: drivers/clk/socfpga/built-in.o(.data+0x248): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 multi_lpae_defconfig WARNING: drivers/clk/socfpga/built-in.o(.data+0xc0): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x998ec): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x999b0): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x99a74): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x51eec): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x51fb0): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x52074): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 multi_v7_defconfig WARNING: drivers/clk/built-in.o(.data+0xbc94): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 multi_v7_defconfig WARNING: drivers/clk/built-in.o(.data+0xbd58): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 multi_v7_defconfig WARNING: drivers/clk/built-in.o(.data+0xbe1c): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 multi_v7_defconfig WARNING: drivers/clk/socfpga/built-in.o(.data+0x184): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 multi_v7_defconfig WARNING: drivers/clk/socfpga/built-in.o(.data+0x248): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 multi_v7_defconfig WARNING: drivers/clk/socfpga/built-in.o(.data+0xc0): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x98f6c): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x99030): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x990f4): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 socfpga_defconfig WARNING: drivers/built-in.o(.data+0x8570): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 socfpga_defconfig WARNING: drivers/built-in.o(.data+0x8634): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 socfpga_defconfig WARNING: drivers/built-in.o(.data+0x86f8): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 socfpga_defconfig WARNING: drivers/clk/built-in.o(.data+0x164): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 socfpga_defconfig WARNING: drivers/clk/built-in.o(.data+0x228): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 socfpga_defconfig WARNING: drivers/clk/built-in.o(.data+0x2ec): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 socfpga_defconfig WARNING: drivers/clk/socfpga/built-in.o(.data+0x184): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 socfpga_defconfig WARNING: drivers/clk/socfpga/built-in.o(.data+0x248): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 socfpga_defconfig WARNING: drivers/clk/socfpga/built-in.o(.data+0xc0): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 socfpga_defconfig WARNING: vmlinux.o(.data+0x15d18): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 socfpga_defconfig WARNING: vmlinux.o(.data+0x15ddc): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 socfpga_defconfig WARNING: vmlinux.o(.data+0x15ea0): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init()

10 years, 3 months

mainline boot: 47 pass, 0 fail (v3.14-rc6-41-gac9dc67)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-rc6-41-gac9dc67 Full Report =========== da8xx_omapl_defconfig --------------------- da850-evm PASS: 0 min 15.8 sec omap2plus_defconfig ------------------- legacy,3730xm PASS: 0 min 55.0 sec am335x-boneblack PASS: 0 min 26.0 sec omap3-beagle-xm PASS: 1 min 0.8 sec legacy,3530beagle PASS: 1 min 4.4 sec omap4-panda PASS: 1 min 12.5 sec omap3-overo-tobi PASS: 0 min 23.3 sec am335x-bone PASS: 0 min 27.8 sec omap3-overo-storm-tobi PASS: 0 min 22.4 sec omap5-uevm PASS: 1 min 6.4 sec omap4-panda-es PASS: 1 min 7.3 sec legacy,3730storm PASS: 0 min 23.8 sec legacy,3530overo PASS: 0 min 24.9 sec multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 44.3 sec sun7i-a20-cubieboard2 PASS: 0 min 14.6 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 22.1 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 19.0 sec imx6dl-wandboard,wand-solo PASS: 0 min 19.0 sec imx6q-wandboard PASS: 0 min 17.5 sec msm_defconfig ------------- qcom-apq8074-dragonboard PASS: 1 min 4.3 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 54.6 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 13.1 sec sun4i-a10-cubieboard PASS: 0 min 16.1 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.8 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 21.0 sec tegra30-beaver PASS: 0 min 17.0 sec am335x-boneblack PASS: 0 min 23.8 sec omap3-beagle-xm PASS: 0 min 48.0 sec sun7i-a20-cubieboard2 PASS: 0 min 14.6 sec armada-370-mirabox PASS: 0 min 22.1 sec omap4-panda PASS: 0 min 51.9 sec armada-xp-openblocks-ax3-4 PASS: 0 min 25.0 sec sun4i-a10-cubieboard PASS: 0 min 14.5 sec bcm28155-ap PASS: 1 min 14.8 sec omap3-overo-tobi PASS: 0 min 21.8 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.3 sec am335x-bone PASS: 0 min 26.4 sec omap3-overo-storm-tobi PASS: 0 min 21.1 sec omap5-uevm PASS: 1 min 49.5 sec imx6q-wandboard PASS: 0 min 18.3 sec omap4-panda-es PASS: 0 min 56.6 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.8 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 33.5 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.2 sec davinci_all_defconfig --------------------- legacy,dm365evm PASS: 0 min 16.1 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.9 sec armada-370-mirabox PASS: 0 min 20.1 sec

10 years, 3 months

next boot: 0 pass, 42 fail (next-20140312)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: next Git describe: next-20140312 Failed boot tests (console logs at the end) =========================================== da850-evm: FAIL: da8xx_omapl_defconfig legacy,3730xm: FAIL: omap2plus_defconfig am335x-boneblack: FAIL: omap2plus_defconfig omap3-beagle-xm: FAIL: omap2plus_defconfig legacy,3530beagle: FAIL: omap2plus_defconfig omap4-panda: FAIL: omap2plus_defconfig omap3-overo-tobi: FAIL: omap2plus_defconfig am335x-bone: FAIL: omap2plus_defconfig omap3-overo-storm-tobi: FAIL: omap2plus_defconfig omap5-uevm: FAIL: omap2plus_defconfig omap4-panda-es: FAIL: omap2plus_defconfig legacy,3730storm: FAIL: omap2plus_defconfig legacy,3530overo: FAIL: omap2plus_defconfig omap5-uevm: FAIL: multi_lpae_defconfig sun7i-a20-cubieboard2: FAIL: multi_lpae_defconfig tegra30-beaver: FAIL: tegra_defconfig imx6dl-wandboard,wand-dual: FAIL: imx_v6_v7_defconfig imx6dl-wandboard,wand-solo: FAIL: imx_v6_v7_defconfig imx6q-wandboard: FAIL: imx_v6_v7_defconfig sun7i-a20-cubieboard2: FAIL: sunxi_defconfig sun4i-a10-cubieboard: FAIL: sunxi_defconfig exynos5250-arndale: FAIL: exynos_defconfig ste-snowball: FAIL: multi_v7_defconfig tegra30-beaver: FAIL: multi_v7_defconfig am335x-boneblack: FAIL: multi_v7_defconfig omap3-beagle-xm: FAIL: multi_v7_defconfig sun7i-a20-cubieboard2: FAIL: multi_v7_defconfig armada-370-mirabox: FAIL: multi_v7_defconfig omap4-panda: FAIL: multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig sun4i-a10-cubieboard: FAIL: multi_v7_defconfig omap3-overo-tobi: FAIL: multi_v7_defconfig imx6dl-wandboard,wand-solo: FAIL: multi_v7_defconfig am335x-bone: FAIL: multi_v7_defconfig omap3-overo-storm-tobi: FAIL: multi_v7_defconfig omap5-uevm: FAIL: multi_v7_defconfig imx6q-wandboard: FAIL: multi_v7_defconfig omap4-panda-es: FAIL: multi_v7_defconfig imx6dl-wandboard,wand-dual: FAIL: multi_v7_defconfig ste-snowball: FAIL: u8500_defconfig sama5d35ek: FAIL: sama5_defconfig legacy,dm365evm: FAIL: davinci_all_defconfig Console logs for failures ========================= da8xx_omapl_defconfig --------------------- da850-evm: FAIL: last 80 lines of boot log: ------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL omap2plus_defconfig ------------------- legacy,3730xm: FAIL: last 80 lines of boot log: ----------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL am335x-boneblack: FAIL: last 80 lines of boot log: -------------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL omap3-beagle-xm: FAIL: last 80 lines of boot log: ------------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL legacy,3530beagle: FAIL: last 80 lines of boot log: --------------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.86 seconds. # PYBOOT: Result: FAIL omap4-panda: FAIL: last 80 lines of boot log: --------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.86 seconds. # PYBOOT: Result: FAIL omap3-overo-tobi: FAIL: last 80 lines of boot log: -------------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL am335x-bone: FAIL: last 80 lines of boot log: --------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL omap3-overo-storm-tobi: FAIL: last 80 lines of boot log: -------------------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL omap5-uevm: FAIL: last 80 lines of boot log: -------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL omap4-panda-es: FAIL: last 80 lines of boot log: ------------------------------------------------ Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL legacy,3730storm: FAIL: last 80 lines of boot log: -------------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL legacy,3530overo: FAIL: last 80 lines of boot log: -------------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL multi_lpae_defconfig -------------------- omap5-uevm: FAIL: last 80 lines of boot log: -------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.80 seconds. # PYBOOT: Result: FAIL sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL tegra_defconfig --------------- tegra30-beaver: FAIL: last 80 lines of boot log: ------------------------------------------------ Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.80 seconds. # PYBOOT: Result: FAIL imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual: FAIL: last 80 lines of boot log: ------------------------------------------------------------ Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-solo: FAIL: last 80 lines of boot log: ------------------------------------------------------------ Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL imx6q-wandboard: FAIL: last 80 lines of boot log: ------------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL sunxi_defconfig --------------- sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 80 lines of boot log: ------------------------------------------------------ Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.86 seconds. # PYBOOT: Result: FAIL exynos_defconfig ---------------- exynos5250-arndale: FAIL: last 80 lines of boot log: ---------------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ ste-snowball: FAIL: last 80 lines of boot log: ---------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL tegra30-beaver: FAIL: last 80 lines of boot log: ------------------------------------------------ Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL am335x-boneblack: FAIL: last 80 lines of boot log: -------------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.86 seconds. # PYBOOT: Result: FAIL omap3-beagle-xm: FAIL: last 80 lines of boot log: ------------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL armada-370-mirabox: FAIL: last 80 lines of boot log: ---------------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.99 seconds. # PYBOOT: Result: FAIL omap4-panda: FAIL: last 80 lines of boot log: --------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------ Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 80 lines of boot log: ------------------------------------------------------ Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL omap3-overo-tobi: FAIL: last 80 lines of boot log: -------------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-solo: FAIL: last 80 lines of boot log: ------------------------------------------------------------ Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL am335x-bone: FAIL: last 80 lines of boot log: --------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL omap3-overo-storm-tobi: FAIL: last 80 lines of boot log: -------------------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL omap5-uevm: FAIL: last 80 lines of boot log: -------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL imx6q-wandboard: FAIL: last 80 lines of boot log: ------------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL omap4-panda-es: FAIL: last 80 lines of boot log: ------------------------------------------------ Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-dual: FAIL: last 80 lines of boot log: ------------------------------------------------------------ Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL u8500_defconfig --------------- ste-snowball: FAIL: last 80 lines of boot log: ---------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL sama5_defconfig --------------- sama5d35ek: FAIL: last 80 lines of boot log: -------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL davinci_all_defconfig --------------------- legacy,dm365evm: FAIL: last 80 lines of boot log: ------------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL

10 years, 3 months

next boot: 26 passed 7 failed (next/next-20140312)

by Olof's autobooter

Failed boards: cubie sunxi_defconfig : FAILED 0:59.82 cubie multi_v7_defconfig : FAILED 1:04.20 cubie2 sunxi_defconfig : FAILED 0:57.82 cubie2 multi_v7_defconfig : FAILED 1:02.15 cubie2 multi_lpae_defconfig : FAILED 0:59.02 cubox dove_defconfig : BUILD FAILED snow exynos_defconfig : FAILED 2:04.63 snowball multi_v7_defconfig : FAILED 1:12.29 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:14.31 arndale exynos_defconfig : warnings 1:02.80 bbb omap2plus_defconfig : passed 1:32.42 bbb multi_v7_defconfig : passed 1:23.60 beaver tegra_defconfig : warnings 0:52.71 beaver multi_v7_defconfig : passed 0:51.61 capri bcm_defconfig : passed 0:42.00 capri multi_v7_defconfig : passed 0:43.61 dalmore tegra_defconfig : warnings 1:17.88 dalmore multi_v7_defconfig : passed 1:14.49 dalmore multi_lpae_defconfig : passed 1:15.92 hummingboard imx_v6_v7_defconfig : passed 1:21.18 hummingboard multi_v7_defconfig : passed 1:06.92 omap5uevm omap2plus_defconfig : warnings 1:11.04 omap5uevm multi_v7_defconfig : warnings 1:35.86 omap5uevm multi_lpae_defconfig : warnings 1:34.18 panda omap2plus_defconfig : warnings 1:13.97 panda multi_v7_defconfig : passed 1:23.56 sama5 sama5_defconfig : passed 1:50.07 seaboard tegra_defconfig : warnings 1:01.02 seaboard multi_v7_defconfig : passed 1:09.83 snowball u8500_defconfig : passed 1:23.49 trimslice tegra_defconfig : warnings 0:57.30 trimslice multi_v7_defconfig : passed 0:58.11 wandboard imx_v6_v7_defconfig : warnings 0:55.51 wandboard multi_v7_defconfig : passed 0:59.21 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie-multi_v7_defconfig failure log: ------------------------------------------------- sun4i#tftp 0x40008000 next/next-20140312/multi_v7_defconfig/zImage tftp 0x40008000 next/next-20140312/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'next/next-20140312/multi_v7_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################### 2.7 MiB/s done Bytes transferred = 4563296 (45a160 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x41000000 next/next-20140312/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x41000000 next/next-20140312/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'next/next-20140312/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *# 410.2 KiB/s done Bytes transferred = 12614 (3146 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x45a160 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fff145 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie-sunxi_defconfig failure log: ------------------------------------------------- DHCP client bound to address 172.16.1.140 sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x40008000 next/next-20140312/sunxi_defconfig/zImage tftp 0x40008000 next/next-20140312/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'next/next-20140312/sunxi_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ########################################################## 2.7 MiB/s done Bytes transferred = 1792992 (1b5be0 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x41000000 next/next-20140312/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x41000000 next/next-20140312/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'next/next-20140312/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *# 2.4 MiB/s done Bytes transferred = 12614 (3146 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b5be0 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fff145 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- tftp 0x40008000 next/next-20140312/multi_lpae_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'next/next-20140312/multi_lpae_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 3.8 MiB/s done Bytes transferred = 4587688 (4600a8 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 next/next-20140312/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000node: cubie2 status: on 000 next/next-20140312/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'next/next-20140312/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 543.9 KiB/s done Bytes transferred = 15603 (3cf3 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x4600a8 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffcf2 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- tftp 0x40008000 next/next-20140312/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'next/next-20140312/multi_v7_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################### 3.7 MiB/s done Bytes transferred = 4563296 (45a160 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 next/next-20140312/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000node: cubie2 status: on 000 next/next-20140312/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'next/next-20140312/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 3 MiB/s done Bytes transferred = 15603 (3cf3 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x45a160 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffcf2 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1node: cubie2 status: on .3 sun7i# tftp 0x40008000 next/next-20140312/sunxi_defconfig/zImage tftp 0x40008000 next/next-20140312/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'next/next-20140312/sunxi_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ########################################################## 3.9 MiB/s done Bytes transferred = 1792992 (1b5be0 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 next/next-20140312/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 next/next-20140312/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'next/next-20140312/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 216.8 KiB/s done Bytes transferred = 15603 (3cf3 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b5be0 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffcf2 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board snow-exynos_defconfig failure log: ------------------------------------------------- [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0/48:f8:b3:2b:2b:68 Sending on LPF/eth0/48:f8:b3:2b:2b:68 Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6 [ 2926.160028] asix 1-1:1.0 eth0: link down [ 2927.824781] asix 1-1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPOFFER from 172.16.1.1 DHCPACK from 172.16.1.1 bound to 172.16.1.185 -- renewal in 3170 seconds. [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. INIT: Entering runlevel: 2 [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting web server: apache2apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting periodic command scheduler: cron[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Loading cpufreq kernel modules...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone (none). [....] Starting system message bus: dbus[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting OpenBSD Secure Shell server: sshd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] CPUFreq Utilities: Setting ondemand CPUFreq governor...disabled, governor not available...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. Debian GNU/Linux 7.0 snow ttySAC3 snow login: ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.124 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x00100000 tmp/snowball-X3Hqxi/tmpT7xwLj-uImage tftp 0x00100000 tmp/snowball-X3Hqxi/tmpT7xwLj-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.124 Filename 'tmp/snowball-X3Hqxi/tmpT7xwLj-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ###################################################### done Bytes transferred = 4604609 (4642c1 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4604545 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout

10 years, 3 months

next build: 79 warnings 7 failures (next/next-20140312)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next, found at: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch) Topmost commit: 7b06bda Add linux-next specific files for 20140312 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next/next-20140312/ Runtime: 45m 3s Passed: 118 Failed: 7 Warnings: 79 Section mismatches: 38 ------------------------------------------------------------------------------- Failed defconfigs: dove_defconfig kirkwood_defconfig multi_v5_defconfig mv78xx0_defconfig mvebu_v5_defconfig mvebu_v7_defconfig orion5x_defconfig ------------------------------------------------------------------------------- Errors: dove_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:913: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:893: undefined reference to `reset_control_assert' kirkwood_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:913: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:893: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:760: undefined reference to `devm_reset_control_get' drivers/i2c/busses/i2c-mv64xxx.c:767: undefined reference to `reset_control_deassert' multi_v5_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:913: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:893: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:760: undefined reference to `devm_reset_control_get' drivers/i2c/busses/i2c-mv64xxx.c:767: undefined reference to `reset_control_deassert' mv78xx0_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:913: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:893: undefined reference to `reset_control_assert' mvebu_v5_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:913: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:893: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:760: undefined reference to `devm_reset_control_get' drivers/i2c/busses/i2c-mv64xxx.c:767: undefined reference to `reset_control_deassert' mvebu_v7_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:913: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:893: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:760: undefined reference to `devm_reset_control_get' drivers/i2c/busses/i2c-mv64xxx.c:767: undefined reference to `reset_control_deassert' orion5x_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:913: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:893: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:760: undefined reference to `devm_reset_control_get' drivers/i2c/busses/i2c-mv64xxx.c:767: undefined reference to `reset_control_deassert' Warnings: 1 drivers/irqchip/irq-bcm2835.c:201:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 1 drivers/irqchip/irq-bcm2835.c:99:9: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 1 drivers/irqchip/irq-clps711x.c:78:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 1 drivers/irqchip/irq-moxart.c:48:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 1 fs/namei.c:2575:2: warning: passing argument 1 of 'locks_verify_locked' from incompatible pointer type [enabled by default] 1 mm/nommu.c:1007:4: warning: passing argument 1 of 'locks_verify_locked' from incompatible pointer type [enabled by default] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 3 drivers/irqchip/irq-mmp.c:199:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 3 drivers/irqchip/irq-mmp.c:212:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 3 drivers/irqchip/irq-orion.c:35:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 3 drivers/irqchip/irq-sirfsoc.c:51:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 3 drivers/irqchip/irq-sun4i.c:140:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 3 drivers/irqchip/irq-sun4i.c:39:70: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 3 drivers/irqchip/irq-vt8500.c:183:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 5 drivers/irqchip/irq-armada-370-xp.c:415:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 13 drivers/irqchip/irq-vic.c:244:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 28 drivers/irqchip/irq-gic.c:283:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1ba0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x5116c): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x51230): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x512f4): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 multi_lpae_defconfig WARNING: drivers/clk/built-in.o(.data+0xbc94): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 multi_lpae_defconfig WARNING: drivers/clk/built-in.o(.data+0xbd58): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 multi_lpae_defconfig WARNING: drivers/clk/built-in.o(.data+0xbe1c): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 multi_lpae_defconfig WARNING: drivers/clk/socfpga/built-in.o(.data+0x184): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 multi_lpae_defconfig WARNING: drivers/clk/socfpga/built-in.o(.data+0x248): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 multi_lpae_defconfig WARNING: drivers/clk/socfpga/built-in.o(.data+0xc0): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x9872c): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x987f0): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x988b4): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x50cec): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x50db0): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x50e74): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 multi_v7_defconfig WARNING: drivers/clk/built-in.o(.data+0xbc94): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 multi_v7_defconfig WARNING: drivers/clk/built-in.o(.data+0xbd58): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 multi_v7_defconfig WARNING: drivers/clk/built-in.o(.data+0xbe1c): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 multi_v7_defconfig WARNING: drivers/clk/socfpga/built-in.o(.data+0x184): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 multi_v7_defconfig WARNING: drivers/clk/socfpga/built-in.o(.data+0x248): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 multi_v7_defconfig WARNING: drivers/clk/socfpga/built-in.o(.data+0xc0): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x97d6c): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x97e30): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x97ef4): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 socfpga_defconfig WARNING: drivers/built-in.o(.data+0x8570): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 socfpga_defconfig WARNING: drivers/built-in.o(.data+0x8634): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 socfpga_defconfig WARNING: drivers/built-in.o(.data+0x86f8): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 socfpga_defconfig WARNING: drivers/clk/built-in.o(.data+0x164): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 socfpga_defconfig WARNING: drivers/clk/built-in.o(.data+0x228): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 socfpga_defconfig WARNING: drivers/clk/built-in.o(.data+0x2ec): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 socfpga_defconfig WARNING: drivers/clk/socfpga/built-in.o(.data+0x184): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 socfpga_defconfig WARNING: drivers/clk/socfpga/built-in.o(.data+0x248): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 socfpga_defconfig WARNING: drivers/clk/socfpga/built-in.o(.data+0xc0): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 socfpga_defconfig WARNING: vmlinux.o(.data+0x15d18): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 socfpga_defconfig WARNING: vmlinux.o(.data+0x15ddc): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 socfpga_defconfig WARNING: vmlinux.o(.data+0x15ea0): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init()

10 years, 3 months

mainline boot: 0 pass, 44 fail (v3.14-rc6-41-gac9dc67)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-rc6-41-gac9dc67 Failed boot tests (console logs at the end) =========================================== da850-evm: FAIL: da8xx_omapl_defconfig legacy,3730xm: FAIL: omap2plus_defconfig am335x-boneblack: FAIL: omap2plus_defconfig omap3-beagle-xm: FAIL: omap2plus_defconfig legacy,3530beagle: FAIL: omap2plus_defconfig omap4-panda: FAIL: omap2plus_defconfig omap3-overo-tobi: FAIL: omap2plus_defconfig am335x-bone: FAIL: omap2plus_defconfig omap3-overo-storm-tobi: FAIL: omap2plus_defconfig omap5-uevm: FAIL: omap2plus_defconfig omap4-panda-es: FAIL: omap2plus_defconfig legacy,3730storm: FAIL: omap2plus_defconfig legacy,3530overo: FAIL: omap2plus_defconfig omap5-uevm: FAIL: multi_lpae_defconfig sun7i-a20-cubieboard2: FAIL: multi_lpae_defconfig tegra30-beaver: FAIL: tegra_defconfig imx6dl-wandboard,wand-dual: FAIL: imx_v6_v7_defconfig imx6dl-wandboard,wand-solo: FAIL: imx_v6_v7_defconfig imx6q-wandboard: FAIL: imx_v6_v7_defconfig sun7i-a20-cubieboard2: FAIL: sunxi_defconfig sun4i-a10-cubieboard: FAIL: sunxi_defconfig armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig armada-370-mirabox: FAIL: mvebu_defconfig exynos5250-arndale: FAIL: exynos_defconfig ste-snowball: FAIL: multi_v7_defconfig tegra30-beaver: FAIL: multi_v7_defconfig am335x-boneblack: FAIL: multi_v7_defconfig omap3-beagle-xm: FAIL: multi_v7_defconfig sun7i-a20-cubieboard2: FAIL: multi_v7_defconfig armada-370-mirabox: FAIL: multi_v7_defconfig omap4-panda: FAIL: multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig sun4i-a10-cubieboard: FAIL: multi_v7_defconfig omap3-overo-tobi: FAIL: multi_v7_defconfig imx6dl-wandboard,wand-solo: FAIL: multi_v7_defconfig am335x-bone: FAIL: multi_v7_defconfig omap3-overo-storm-tobi: FAIL: multi_v7_defconfig omap5-uevm: FAIL: multi_v7_defconfig imx6q-wandboard: FAIL: multi_v7_defconfig omap4-panda-es: FAIL: multi_v7_defconfig imx6dl-wandboard,wand-dual: FAIL: multi_v7_defconfig ste-snowball: FAIL: u8500_defconfig sama5d35ek: FAIL: sama5_defconfig legacy,dm365evm: FAIL: davinci_all_defconfig Console logs for failures ========================= da8xx_omapl_defconfig --------------------- da850-evm: FAIL: last 80 lines of boot log: ------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.86 seconds. # PYBOOT: Result: FAIL omap2plus_defconfig ------------------- legacy,3730xm: FAIL: last 80 lines of boot log: ----------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.86 seconds. # PYBOOT: Result: FAIL am335x-boneblack: FAIL: last 80 lines of boot log: -------------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL omap3-beagle-xm: FAIL: last 80 lines of boot log: ------------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL legacy,3530beagle: FAIL: last 80 lines of boot log: --------------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.86 seconds. # PYBOOT: Result: FAIL omap4-panda: FAIL: last 80 lines of boot log: --------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL omap3-overo-tobi: FAIL: last 80 lines of boot log: -------------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.86 seconds. # PYBOOT: Result: FAIL am335x-bone: FAIL: last 80 lines of boot log: --------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL omap3-overo-storm-tobi: FAIL: last 80 lines of boot log: -------------------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL omap5-uevm: FAIL: last 80 lines of boot log: -------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL omap4-panda-es: FAIL: last 80 lines of boot log: ------------------------------------------------ Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL legacy,3730storm: FAIL: last 80 lines of boot log: -------------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.86 seconds. # PYBOOT: Result: FAIL legacy,3530overo: FAIL: last 80 lines of boot log: -------------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL multi_lpae_defconfig -------------------- omap5-uevm: FAIL: last 80 lines of boot log: -------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.87 seconds. # PYBOOT: Result: FAIL sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL tegra_defconfig --------------- tegra30-beaver: FAIL: last 80 lines of boot log: ------------------------------------------------ Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual: FAIL: last 80 lines of boot log: ------------------------------------------------------------ Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-solo: FAIL: last 80 lines of boot log: ------------------------------------------------------------ Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL imx6q-wandboard: FAIL: last 80 lines of boot log: ------------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL sunxi_defconfig --------------- sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.86 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 80 lines of boot log: ------------------------------------------------------ Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.86 seconds. # PYBOOT: Result: FAIL mvebu_defconfig --------------- armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------ Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.86 seconds. # PYBOOT: Result: FAIL armada-370-mirabox: FAIL: last 80 lines of boot log: ---------------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.86 seconds. # PYBOOT: Result: FAIL exynos_defconfig ---------------- exynos5250-arndale: FAIL: last 80 lines of boot log: ---------------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.86 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ ste-snowball: FAIL: last 80 lines of boot log: ---------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL tegra30-beaver: FAIL: last 80 lines of boot log: ------------------------------------------------ Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.86 seconds. # PYBOOT: Result: FAIL am335x-boneblack: FAIL: last 80 lines of boot log: -------------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.82 seconds. # PYBOOT: Result: FAIL omap3-beagle-xm: FAIL: last 80 lines of boot log: ------------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL armada-370-mirabox: FAIL: last 80 lines of boot log: ---------------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 3.00 seconds. # PYBOOT: Result: FAIL omap4-panda: FAIL: last 80 lines of boot log: --------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------ Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.86 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 80 lines of boot log: ------------------------------------------------------ Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL omap3-overo-tobi: FAIL: last 80 lines of boot log: -------------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-solo: FAIL: last 80 lines of boot log: ------------------------------------------------------------ Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL am335x-bone: FAIL: last 80 lines of boot log: --------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.86 seconds. # PYBOOT: Result: FAIL omap3-overo-storm-tobi: FAIL: last 80 lines of boot log: -------------------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.86 seconds. # PYBOOT: Result: FAIL omap5-uevm: FAIL: last 80 lines of boot log: -------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL imx6q-wandboard: FAIL: last 80 lines of boot log: ------------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL omap4-panda-es: FAIL: last 80 lines of boot log: ------------------------------------------------ Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.86 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-dual: FAIL: last 80 lines of boot log: ------------------------------------------------------------ Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.86 seconds. # PYBOOT: Result: FAIL u8500_defconfig --------------- ste-snowball: FAIL: last 80 lines of boot log: ---------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL sama5_defconfig --------------- sama5d35ek: FAIL: last 80 lines of boot log: -------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL davinci_all_defconfig --------------------- legacy,dm365evm: FAIL: last 80 lines of boot log: ------------------------------------------------- Conmux::connect: registry not available - IO::Socket::INET: connect: No route to host ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 2.85 seconds. # PYBOOT: Result: FAIL

10 years, 3 months

mainline boot: 33 passed 0 failed (mainline/v3.14-rc6-41-gac9dc67)

by Olof's autobooter

Failed boards: Successful boards: apc vt8500_v6_v7_defconfig : passed 1:19.19 arndale exynos_defconfig : passed 1:07.52 bbb omap2plus_defconfig : passed 1:36.94 bbb multi_v7_defconfig : passed 1:25.11 beaver tegra_defconfig : passed 0:54.02 beaver multi_v7_defconfig : passed 0:52.52 capri bcm_defconfig : passed 0:43.61 capri multi_v7_defconfig : passed 0:44.25 cubie sunxi_defconfig : passed 0:51.06 cubie multi_v7_defconfig : passed 0:51.76 cubie2 sunxi_defconfig : passed 0:50.11 cubie2 multi_v7_defconfig : passed 1:01.30 cubie2 multi_lpae_defconfig : passed 0:56.25 cubox dove_defconfig : passed 1:13.19 dalmore tegra_defconfig : passed 1:20.63 dalmore multi_v7_defconfig : passed 1:18.40 dalmore multi_lpae_defconfig : passed 1:19.65 hummingboard imx_v6_v7_defconfig : passed 1:19.03 hummingboard multi_v7_defconfig : passed 1:09.90 omap5uevm multi_v7_defconfig : warnings 1:39.14 omap5uevm multi_lpae_defconfig : warnings 1:36.96 panda omap2plus_defconfig : passed 1:20.51 panda multi_v7_defconfig : passed 1:33.70 sama5 sama5_defconfig : passed 1:58.92 seaboard tegra_defconfig : passed 1:00.57 seaboard multi_v7_defconfig : passed 1:05.62 snow exynos_defconfig : passed 1:24.17 snowball u8500_defconfig : passed 1:54.01 snowball multi_v7_defconfig : passed 2:52.50 trimslice tegra_defconfig : passed 0:57.98 trimslice multi_v7_defconfig : passed 1:12.23 wandboard imx_v6_v7_defconfig : passed 0:58.18 wandboard multi_v7_defconfig : passed 1:11.62 Offline boards: omap5uevm omap2plus_defconfig : OFFLINE 2:16.58 Board legend is available at http://arm-soc.lixom.net/boards.html

10 years, 3 months

mainline build: 7 warnings 0 failures (mainline/v3.14-rc6-41-gac9dc67)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: ac9dc67 Merge tag 'pci-v3.14-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.14-rc6-41-gac9dc67/ Runtime: 32m 3s Passed: 123 Failed: 0 Warnings: 7 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/staging/imx-drm/imx-drm-core.c:87:25: warning: unused variable 'imxdrm' [-Wunused-variable] 1 drivers/usb/host/xhci-plat.c:203:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:211:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) Section mismatches:

10 years, 3 months

next boot: 37 pass, 8 fail (next-20140311)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: next Git describe: next-20140311 Failed boot tests (console logs at the end) =========================================== sun7i-a20-cubieboard2: FAIL: multi_lpae_defconfig sun7i-a20-cubieboard2: FAIL: sunxi_defconfig sun4i-a10-cubieboard: FAIL: sunxi_defconfig ste-snowball: FAIL: multi_v7_defconfig sun7i-a20-cubieboard2: FAIL: multi_v7_defconfig sun4i-a10-cubieboard: FAIL: multi_v7_defconfig omap5-uevm: FAIL: multi_v7_defconfig legacy,dm365evm: FAIL: davinci_all_defconfig Full Report =========== da8xx_omapl_defconfig --------------------- da850-evm PASS: 0 min 15.7 sec omap2plus_defconfig ------------------- legacy,3730xm PASS: 0 min 48.5 sec am335x-boneblack PASS: 0 min 25.9 sec omap3-beagle-xm PASS: 1 min 0.7 sec legacy,3530beagle PASS: 0 min 39.0 sec omap4-panda PASS: 1 min 3.8 sec omap3-overo-tobi PASS: 0 min 23.0 sec am335x-bone PASS: 0 min 27.4 sec omap3-overo-storm-tobi PASS: 0 min 24.4 sec omap5-uevm PASS: 0 min 57.0 sec omap4-panda-es PASS: 1 min 5.8 sec legacy,3730storm PASS: 0 min 20.1 sec legacy,3530overo PASS: 0 min 21.0 sec multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 52.7 sec sun7i-a20-cubieboard2 FAIL: 0 min 19.5 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.1 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.5 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.4 sec imx6q-wandboard PASS: 0 min 17.2 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 FAIL: 0 min 17.8 sec sun4i-a10-cubieboard FAIL: 0 min 18.5 sec bcm_defconfig ------------- bcm28155-ap PASS: 1 min 14.5 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.1 sec multi_v7_defconfig ------------------ qcom-apq8074-dragonboard PASS: 1 min 4.2 sec ste-snowball FAIL: 0 min 33.4 sec tegra30-beaver PASS: 0 min 20.0 sec am335x-boneblack PASS: 0 min 23.9 sec omap3-beagle-xm PASS: 0 min 51.1 sec sun7i-a20-cubieboard2 FAIL: 0 min 31.4 sec armada-370-mirabox PASS: 0 min 22.2 sec omap4-panda PASS: 1 min 2.3 sec armada-xp-openblocks-ax3-4 PASS: 0 min 25.1 sec sun4i-a10-cubieboard FAIL: 0 min 19.8 sec bcm28155-ap PASS: 1 min 14.7 sec omap3-overo-tobi PASS: 0 min 21.9 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.7 sec am335x-bone PASS: 0 min 26.6 sec omap3-overo-storm-tobi PASS: 0 min 24.1 sec omap5-uevm FAIL: 0 min 31.4 sec imx6q-wandboard PASS: 0 min 16.9 sec omap4-panda-es PASS: 0 min 52.9 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.2 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 33.4 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.0 sec davinci_all_defconfig --------------------- legacy,dm365evm FAIL: 0 min 31.4 sec Console logs for failures ========================= multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- setenv ethaddr 22:71:81:DA:53:EA sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i#if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.153 sun7i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun7i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-4Eb_Xb/zImage tftp 0x40008000 192.168.1.2:tmp/cubie2-4Eb_Xb/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-4Eb_Xb/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 2.7 MiB/s done Bytes transferred = 4587328 (45ff40 hex) sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-4Eb_Xb/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-4Eb_Xb/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-4Eb_Xb/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 2.1 MiB/s done Bytes transferred = 15599 (3cef hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x45ff40 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffcee ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 19.54 seconds. # PYBOOT: Result: FAIL sunxi_defconfig --------------- sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 sun7i# setenv ethaddr 22:71:81:DA:53:EA setenv ethaddr 22:71:81:DA:53:EA sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i#setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i#if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.153 sun7i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun7i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun7i#tftp 0x40008000 192.168.1.2:tmp/cubie2-kMFJnU/zImage tftp 0x40008000 192.168.1.2:tmp/cubie2-kMFJnU/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-kMFJnU/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################### 2.7 MiB/s done Bytes transferred = 1789360 (1b4db0 hex) sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-kMFJnU/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-kMFJnU/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-kMFJnU/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 2.5 MiB/s done Bytes transferred = 15599 (3cef hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i#bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b4db0 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffcee ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 17.75 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 80 lines of boot log: ------------------------------------------------------ arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 sun4i# setenv ethaddr 2e:40:70:f0:12:08 setenv ethaddr 2e:40:70:f0:12:08 sun4i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun4i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun4i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun4i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun4i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun4i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun4i#dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.193 sun4i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun4i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun4i# tftp 0x40008000 192.168.1.2:tmp/cubie-z5Nvdu/zImage tftp 0x40008000 192.168.1.2:tmp/cubie-z5Nvdu/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-z5Nvdu/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################### 2.7 MiB/s done Bytes transferred = 1789360 (1b4db0 hex) sun4i#tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i# tftp 0x41000000 192.168.1.2:tmp/cubie-z5Nvdu/sun4i-a10-cubieboard.dtb tftp 0x41000000 192.168.1.2:tmp/cubie-z5Nvdu/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-z5Nvdu/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *# 2.4 MiB/s done Bytes transferred = 12610 (3142 hex) sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.193:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b4db0 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fff141 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 18.48 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ ste-snowball: FAIL: last 80 lines of boot log: ---------------------------------------------- (user:khilman) Reboot snowball Reboot: snowball ; ip9258 2 2 : ('off', 6, 'on') , sleep 6, MCDE: startup failed sec_bridge: ISSWAPI_FLUSH_BOOT_CODE: 2 EMMC: 0, MMC: 1 In: serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 1 0 U8500 $ U8500 $ version U8500 $ versionsetenv ethaddr 6e:e6:84:36:8e:9e U-Boot 2009.11 (sept. 19 2011 - 17:03:11) U8500 $ setenv ethaddr 6e:e6:84:36:8e:9esetenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 Can't overwrite "ethaddr" U8500 $ setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U8500 $ setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'if test -n ${initenv}; then run initenv; fi U8500 $ if test -n ${initenv}; then run initenv; fiif test -n ${preboot}; then run preboot; fi U8500 $ if test -n ${preboot}; then run preboot; fisetenv autoload no; setenv autoboot no U8500 $ setenv autoload no; setenv autoboot nodhcp U8500 $ dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.159 U8500 $ setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U8500 $ if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U8500 $ tftp 0x00800000 192.168.1.2:tmp/snowball-Mjznkk/tmpDdFFA7-uImage tftp 0x00800000 192.168.1.2:tmp/snowball-Mjznkk/tmpDdFFA7-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'tmp/snowball-Mjznkk/tmpDdFFA7-uImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ###################################################### done Bytes transferred = 4603993 (464059 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $ bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4603929 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 33.38 seconds. # PYBOOT: Result: FAIL sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- Connected to cubie2 console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(cubie2 console)> hardreset (user:khilman) Reboot cubie2 Reboot: cubie2 ; phidget 3 0 : off, sleep, on 0 sun7i# ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.41 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 80 lines of boot log: ------------------------------------------------------ setenv ethaddr 2e:40:70:f0:12:08 sun4i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun4i#setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun4i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun4i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun4i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun4i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun4i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.193 sun4i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun4i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun4i# tftp 0x40008000 192.168.1.2:tmp/cubie-mBq_F5/zImage tftp 0x40008000 192.168.1.2:tmp/cubie-mBq_F5/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-mBq_F5/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################### 2.7 MiB/s done Bytes transferred = 4562680 (459ef8 hex) sun4i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i# tftp 0x41000000 192.168.1.2:tmp/cubie-mBq_F5/sun4i-a10-cubieboard.dtb tftp 0x41000000 192.168.1.2:tmp/cubie-mBq_F5/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-mBq_F5/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *# 2.4 MiB/s done Bytes transferred = 12610 (3142 hex) sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.193:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x459ef8 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fff141 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 19.75 seconds. # PYBOOT: Result: FAIL omap5-uevm: FAIL: last 80 lines of boot log: -------------------------------------------- Connected to omap5uevm console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(omap5uevm console)> hardreset (user:khilman) Reboot omap5uevm Reboot: omap5uevm ; phidget 1 2 : ('off', 4, 'on') , sleep 4, found: 002/014 2 ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.37 seconds. # PYBOOT: Result: FAIL davinci_all_defconfig --------------------- legacy,dm365evm: FAIL: last 80 lines of boot log: ------------------------------------------------- Connected to dm365evm console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(dm365evm console)> hardreset (user:khilman) Reboot dm365evm Reboot: dm365evm ; phidget 4 1 : ('off', 4, 'on') , sleep 4, ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.36 seconds. # PYBOOT: Result: FAIL

10 years, 3 months

← Newer
1
...
17
18
19
20
21
22
23
...
34
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports March 2014