Kernel-build-reports April 2014

kernel-build-reports@lists.linaro.org

20 participants
319 discussions

mainline boot: 31 passed 2 failed (mainline/v3.15-rc2-69-g1aae31c)

by Olof's autobooter

Failed boards: cubie2 sunxi_defconfig : FAILED 1:18.90 snowball multi_v7_defconfig : FAILED 1:08.32 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:14.01 arndale exynos_defconfig : passed 1:00.03 bbb omap2plus_defconfig : passed 1:33.20 bbb multi_v7_defconfig : passed 1:23.38 beaver tegra_defconfig : passed 0:59.17 beaver multi_v7_defconfig : passed 0:49.30 capri bcm_defconfig : passed 0:43.48 capri multi_v7_defconfig : passed 0:45.49 cubie sunxi_defconfig : passed 0:56.40 cubie multi_v7_defconfig : passed 1:04.98 cubie2 multi_v7_defconfig : passed 1:07.47 cubie2 multi_lpae_defconfig : passed 1:20.32 dalmore tegra_defconfig : passed 1:20.44 dalmore multi_v7_defconfig : passed 1:15.60 dalmore multi_lpae_defconfig : passed 1:16.67 hummingboard imx_v6_v7_defconfig : passed 1:14.04 hummingboard multi_v7_defconfig : passed 1:05.72 omap5uevm omap2plus_defconfig : warnings 1:05.75 omap5uevm multi_v7_defconfig : warnings 1:43.08 omap5uevm multi_lpae_defconfig : warnings 1:38.62 panda omap2plus_defconfig : warnings 1:12.95 panda multi_v7_defconfig : passed 1:18.20 sama5 sama5_defconfig : passed 1:58.18 seaboard tegra_defconfig : passed 0:56.92 seaboard multi_v7_defconfig : passed 1:10.45 snow exynos_defconfig : passed 1:28.11 snowball u8500_defconfig : passed 2:07.39 trimslice tegra_defconfig : passed 0:59.00 trimslice multi_v7_defconfig : passed 1:01.50 wandboard imx_v6_v7_defconfig : passed 0:53.59 wandboard multi_v7_defconfig : passed 0:52.29 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.017667] platform ahci-5v.2: Driver reg-fixed-voltage requests probe deferral [ 0.017690] reg-fixed-voltage usb1-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 0.017703] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.017724] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.017736] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.018673] Switched to clocksource arch_sys_counter [ 0.025817] NET: Registered protocol family 2 [ 0.026278] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.026368] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.026489] TCP: Hash tables configured (established 8192 bind 8192) [ 0.026576] TCP: reno registered [ 0.026592] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.026648] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.026847] NET: Registered protocol family 1 [ 0.027241] RPC: Registered named UNIX socket transport module. [ 0.027254] RPC: Registered udp transport module. [ 0.027260] RPC: Registered tcp transport module. [ 0.027266] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.028223] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.028778] bounce pool size: 64 pages [ 0.036495] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.036512] io scheduler noop registered [ 0.036519] io scheduler deadline registered [ 0.036699] io scheduler cfq registered (default) [ 0.038345] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.080265] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.082676] console [ttyS0] disabled [ 0.102872] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.618368] console [ttyS0] enabled [ 0.623080] mousedev: PS/2 mouse device common for all mice [ 0.628951] i2c /dev entries driver [ 0.633742] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.642730] TCP: cubic registered [ 0.646047] NET: Registered protocol family 17 [ 0.650607] Registering SWP/SWPB emulation handler [ 0.656324] ahci-5v: 5000 mV [ 0.659610] usb1-vbus: 5000 mV [ 0.662967] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.165 U8500 $setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x01000000 tmpBqUoeU-uImage tftp 0x01000000 tmpBqUoeU-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.165 Filename 'tmpBqUoeU-uImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################ done Bytes transferred = 4690289 (479171 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x01000000 bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4690225 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout

10 years, 8 months

mainline build: 135 warnings 0 failures (mainline/v3.15-rc2-69-g1aae31c)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 1aae31c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.15-rc2-69-g1aae31c/ Runtime: 40m 57s Passed: 124 Failed: 0 Warnings: 135 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 buildall.arm.acs5k_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.acs5k_tiny_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.am200epdkit_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.ape6evm_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.armadillo800eva_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.assabet_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.at91_dt_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.at91rm9200_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.at91sam9260_9g20_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.at91sam9261_9g10_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.at91sam9263_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.at91sam9g45_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.at91sam9rl_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.at91x40_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.badge4_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.bcm2835_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.bcm_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.bockw_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.cerfcube_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.clps711x_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.cm_x2xx_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.cm_x300_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.cns3420vb_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.colibri_pxa270_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.colibri_pxa300_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.collie_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.corgi_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.davinci_all_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.dove_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.ebsa110_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.efm32_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.em_x270_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.ep93xx_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.eseries_pxa_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.exynos_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.ezx_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.footbridge_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.genmai_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.h3600_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.h5000_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.hackkit_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.hi3xxx_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.imote2_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.imx_v4_v5_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.imx_v6_v7_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.integrator_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.iop13xx_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.iop32x_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.iop33x_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.ixp4xx_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.jornada720_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.keystone_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.kirkwood_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.koelsch_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.ks8695_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.kzm9g_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.lager_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.lart_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.lpc32xx_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.lpd270_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.lubbock_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.mackerel_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.magician_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.mainstone_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.marzen_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.mini2440_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.mmp2_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.moxart_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.msm_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.multi_lpae_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.multi_v5_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.multi_v7_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.mv78xx0_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.mvebu_v5_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.mvebu_v7_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.mxs_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.neponset_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.netwinder_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.netx_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.nhk8815_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.nuc910_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.nuc950_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.nuc960_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.omap1_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.omap2plus_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.orion5x_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.palmz72_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.pcm027_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.pleb_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.prima2_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.pxa168_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.pxa255-idp_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.pxa3xx_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.pxa910_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.raumfeld_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.realview_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.realview-smp_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.rpc_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.s3c2410_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.s3c6400_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.s5p64x0_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.s5pc100_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.s5pv210_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.sama5_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.shannon_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.shmobile_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.simpad_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.socfpga_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.spear13xx_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.spear3xx_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.spear6xx_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.spitz_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.sunxi_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.tct_hammer_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.tegra_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.trizeps4_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.u300_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.u8500_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.versatile_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.vexpress_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.viper_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.vt8500_v6_v7_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.xcep_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.zeus_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 drivers/irqchip/irq-clps711x.c:78:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1ba0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

10 years, 8 months

next boot: 5 passed 28 failed (next/next-20140423)

by Olof's autobooter

Failed boards: apc vt8500_v6_v7_defconfig : FAILED 3:06.29 arndale exynos_defconfig : FAILED 0:48.96 bbb omap2plus_defconfig : FAILED 0:39.05 bbb multi_v7_defconfig : FAILED 0:31.67 beaver tegra_defconfig : FAILED 3:05.26 beaver multi_v7_defconfig : FAILED 3:04.76 capri bcm_defconfig : FAILED 2:56.67 capri multi_v7_defconfig : FAILED 2:56.89 cubie2 sunxi_defconfig : FAILED 1:21.17 dalmore tegra_defconfig : FAILED 3:04.87 dalmore multi_v7_defconfig : FAILED 3:01.93 dalmore multi_lpae_defconfig : FAILED 3:02.41 hummingboard imx_v6_v7_defconfig : FAILED 2:57.85 hummingboard multi_v7_defconfig : FAILED 2:55.24 omap5uevm omap2plus_defconfig : FAILED 3:17.20 omap5uevm multi_v7_defconfig : FAILED 3:50.24 omap5uevm multi_lpae_defconfig : FAILED 3:48.53 panda omap2plus_defconfig : FAILED 3:05.48 panda multi_v7_defconfig : FAILED 3:06.45 sama5 sama5_defconfig : FAILED 0:37.33 seaboard multi_v7_defconfig : FAILED 3:01.60 snow exynos_defconfig : FAILED 3:31.90 snowball u8500_defconfig : FAILED 0:34.84 snowball multi_v7_defconfig : FAILED 1:05.34 trimslice tegra_defconfig : FAILED 0:36.85 trimslice multi_v7_defconfig : FAILED 0:33.81 wandboard imx_v6_v7_defconfig : FAILED 2:55.22 wandboard multi_v7_defconfig : FAILED 2:54.03 Successful boards: cubie sunxi_defconfig : passed 1:12.19 cubie multi_v7_defconfig : passed 1:23.79 cubie2 multi_v7_defconfig : passed 1:16.94 cubie2 multi_lpae_defconfig : passed 1:11.92 seaboard tegra_defconfig : passed 1:02.40 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Board apc-vt8500_v6_v7_defconfig failure log: ------------------------------------------------- [ 4.720000] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 4.780000] sda: sda1 [ 4.790000] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 4.800000] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 5.100000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 5.100000] VFS: Mounted root (ext3 filesystem) on device 8:1. [ 5.120000] devtmpfs: mounted [ 5.120000] Freeing unused kernel memory: 136K (c0425000 - c0447000) version 2[ 5.310000] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 5.310000] pgd = c7b2c000 [ 5.320000] [00000000] *pgd=07b1e831, *pte=00000000, *ppte=00000000 [ 5.320000] Internal error: Oops: 80000007 [#1] ARM [ 5.320000] CPU: 0 PID: 33 Comm: init Not tainted 3.15.0-rc2-next-20140423 #1 [ 5.320000] task: c795ea40 ti: c7b28000 task.ti: c7b28000 [ 5.320000] PC is at 0x0 [ 5.320000] LR is at do_sync_write+0x7c/0xa4 [ 5.320000] pc : [<00000000>] lr : [<c0092dd4>] psr: a0000013 [ 5.320000] sp : c7b29f00 ip : 00000000 fp : 00000002 [ 5.320000] r10: 00000000 r9 : beaa257c r8 : 00000180 [ 5.320000] r7 : 00000180 r6 : c7b29f80 r5 : 00000000 r4 : 00000000 [ 5.320000] r3 : 00000000 r2 : 00000001 r1 : c7b29f08 r0 : c7b29f10 [ 5.320000] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 5.320000] Control: 00c5387d Table: 07b2c008 DAC: 00000015 [ 5.320000] Process init (pid: 33, stack limit = 0xc7b28238) [ 5.320000] Stack: (0xc7b29f00 to 0xc7b2a000) [ 5.320000] 9f00: 00000000 00000000 beaa257c 00000180 c7b30000 00000000 00000000 00000000 [ 5.320000] 9f20: c795ea40 00000000 00000000 00000000 00000000 00000000 00000180 00000000 [ 5.320000] 9f40: 00000000 00000000 c7b30000 beaa257c c7b29f80 c0093044 c7b30000 00000002 [ 5.320000] 9f60: c7b30000 00000000 00000000 c7b30000 c7b30000 00000180 beaa257c c00931e8 [ 5.320000] 9f80: 00000000 00000000 00000002 b6f13000 000002d0 00002fb8 00000004 c000e244 [ 5.320000] 9fa0: c7b28000 c000e0c0 b6f13000 000002d0 00000003 beaa257c 00000180 00000000 [ 5.320000] 9fc0: b6f13000 000002d0 00002fb8 00000004 beaa257c 00000000 beaa2514 00000002 [ 5.320000] 9fe0: 00000000 beaa2258 b6ee63c0 b6ee6250 60000010 00000003 edecbedb 87d3dfbd [ 5.320000] [<c0092dd4>] (do_sync_write) from [<c0093044>] (vfs_write+0xa4/0x174) [ 5.320000] [<c0093044>] (vfs_write) from [<c00931e8>] (SyS_write+0x40/0x94) [ 5.320000] [<c00931e8>] (SyS_write) from [<c000e0c0>] (ret_fast_syscall+0x0/0x30) [ 5.320000] Code: bad PC value [ 5.490000] ---[ end trace 0806fd2970b168d4 ]--- ~$off # PYBOOT: Exception: timeout Board arndale-exynos_defconfig failure log: ------------------------------------------------- [ 3.500512] r7 : ee00e800 r6 : ee06bf80 r5 : 00000000 r4 : 00000000 [ 3.507022] r3 : 00000000 r2 : 00000001 r1 : ee06bf00 r0 : ee06bf08 [ 3.513532] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 3.520649] Control: 10c5387d Table: 6daf406a DAC: 00000015 [ 3.526378] Process init (pid: 1, stack limit = 0xee06a240) [ 3.531933] Stack: (0xee06bef8 to 0xee06c000) [ 3.536274] bee0: 00000000 00000000 [ 3.544435] bf00: beace82c 00000180 ed903200 00000000 00000000 00000000 ee00e800 00000000 [ 3.552593] bf20: 00000000 00000000 00000000 00000000 00000180 00000000 00000000 00000000 [ 3.560753] bf40: ed903200 ed903200 beace82c ee06bf80 00000180 c00b8f2c ed903200 00000002 [ 3.568911] bf60: ed903200 00000000 00000000 ed903200 ed903200 00000180 beace82c c00b94f4 [ 3.577071] bf80: 00000000 00000000 00000002 00000000 b6f082d0 beace82c 00000004 c000e624 [ 3.585230] bfa0: ee06a000 c000e4a0 00000000 b6f082d0 00000000 beace82c 00000180 b6f082d0 [ 3.593390] bfc0: 00000000 b6f082d0 beace82c 00000004 00000000 b6f0afc0 ffffffff 00000001 [ 3.601548] bfe0: 00000004 beace520 b6edcbf7 b6e3df96 60000030 00000000 ffce7f3f ffffdfff [ 3.609714] [<c00b85b0>] (do_sync_write) from [<c00b8f2c>] (vfs_write+0xa4/0x174) [ 3.617176] [<c00b8f2c>] (vfs_write) from [<c00b94f4>] (SyS_write+0x40/0x94) [ 3.624209] [<c00b94f4>] (SyS_write) from [<c000e4a0>] (ret_fast_syscall+0x0/0x30) [ 3.631757] Code: bad PC value [ 3.634861] ---[ end trace 298cc51ebb45345d ]--- [ 3.639685] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 3.639685] [ 3.648509] CPU1: stopping [ 3.651200] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.15.0-rc2-next-20140423 #1 [ 3.659716] [<c0014164>] (unwind_backtrace) from [<c0011418>] (show_stack+0x10/0x14) [ 3.667438] [<c0011418>] (show_stack) from [<c0390234>] (dump_stack+0x80/0xc0) [ 3.674639] [<c0390234>] (dump_stack) from [<c001340c>] (handle_IPI+0x17c/0x18c) [ 3.682014] [<c001340c>] (handle_IPI) from [<c0008588>] (gic_handle_irq+0x64/0x68) [ 3.689569] [<c0008588>] (gic_handle_irq) from [<c0011f80>] (__irq_svc+0x40/0x70) [ 3.697026] Exception stack(0xee099f98 to 0xee099fe0) [ 3.702062] 9f80: 00000001 c045b85c [ 3.710223] 9fa0: 0000083a 00000000 c051c480 c0398a98 ee098000 c054f319 c054f319 ee098000 [ 3.718382] 9fc0: 00000001 ee098000 00000001 ee099fe0 c000f0a4 c000f0a8 60000013 ffffffff [ 3.726546] [<c0011f80>] (__irq_svc) from [<c000f0a8>] (arch_cpu_idle+0x2c/0x30) [ 3.733925] [<c000f0a8>] (arch_cpu_idle) from [<c0050340>] (cpu_startup_entry+0x114/0x160) [ 3.742167] [<c0050340>] (cpu_startup_entry) from [<40008624>] (0x40008624) [ 3.749112] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 3.749112] ~$off # PYBOOT: Exception: panic Board bbb-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.210462] Code: bad PC value [ 2.213741] ---[ end trace ea478c935a288bf9 ]--- [ 2.223682] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 2.232289] pgd = db3c0000 [ 2.235134] [00000000] *pgd=9b3bb831, *pte=00000000, *ppte=00000000 [ 2.241776] Internal error: Oops: 80000007 [#2] SMP ARM [ 2.247264] Modules linked in: [ 2.250486] CPU: 0 PID: 1 Comm: init Tainted: G D 3.15.0-rc2-next-20140423 #1 [ 2.258988] task: db05a000 ti: db05c000 task.ti: db05c000 [ 2.264661] PC is at 0x0 [ 2.267332] LR is at do_sync_write+0x80/0xa8 [ 2.271820] pc : [<00000000>] lr : [<c02e1888>] psr: a0000013 [ 2.271820] sp : db05def8 ip : 00000000 fp : 00000001 [ 2.283881] r10: 00000000 r9 : bea1982c r8 : 00000180 [ 2.289369] r7 : db05a000 r6 : db05df80 r5 : 00000000 r4 : 00000000 [ 2.296226] r3 : 00000000 r2 : 00000001 r1 : db05df00 r0 : db05df08 [ 2.303087] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 2.310584] Control: 10c5387d Table: 9b3c0019 DAC: 00000015 [ 2.316620] Process init (pid: 1, stack limit = 0xdb05c250) [ 2.322474] Stack: (0xdb05def8 to 0xdb05e000) [ 2.327053] dee0: 00000000 00000000 [ 2.335651] df00: bea1982c 00000180 db3bf000 00000000 00000000 00000000 db05a000 00000000 [ 2.344248] df20: 00000000 00000000 00000000 00000000 00000180 00000000 00000000 00000000 [ 2.352846] df40: db3bf000 db3bf000 bea1982c db05df80 00000180 c02e2200 db3bf000 00000002 [ 2.361443] df60: db3bf000 00000000 00000000 db3bf000 db3bf000 00000180 bea1982c c02e27c8 [ 2.370040] df80: 00000000 00000000 00000002 00000000 b6f7b2d0 bea1982c 00000004 c020e824 [ 2.378638] dfa0: db05c000 c020e6a0 00000000 b6f7b2d0 00000000 bea1982c 00000180 b6f7b2d0 [ 2.387236] dfc0: 00000000 b6f7b2d0 bea1982c 00000004 00000000 b6f7dfc0 ffffffff 00000001 [ 2.395834] dfe0: 00000004 bea19520 b6f4fbf7 b6eb0f96 60000030 00000000 77a6fef5 2f7f77ed [ 2.404446] [<c02e1888>] (do_sync_write) from [<c02e2200>] (vfs_write+0xa4/0x174) [ 2.412316] [<c02e2200>] (vfs_write) from [<c02e27c8>] (SyS_write+0x40/0x94) [ 2.419737] [<c02e27c8>] (SyS_write) from [<c020e6a0>] (ret_fast_syscall+0x0/0x30) [ 2.427698] Code: bad PC value [ 2.430956] ---[ end trace ea478c935a288bfa ]--- [ 2.436321] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.436321] [ 2.445931] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.445931] ~$off # PYBOOT: Exception: panic Board bbb-omap2plus_defconfig failure log: ------------------------------------------------- [ 3.375324] [<c011b778>] (SyS_write) from [<c000e5a0>] (ret_fast_syscall+0x0/0x48) [ 3.383259] Code: bad PC value [ 3.386553] ---[ end trace 82129d5339bf0248 ]--- [ 3.398600] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 3.407199] pgd = de0f4000 [ 3.410038] [00000000] *pgd=9e554831, *pte=00000000, *ppte=00000000 [ 3.416689] Internal error: Oops: 80000007 [#2] SMP ARM [ 3.422162] Modules linked in: [ 3.425378] CPU: 0 PID: 1 Comm: init Tainted: G D 3.15.0-rc2-next-20140423 #1 [ 3.433847] task: de044b00 ti: de046000 task.ti: de046000 [ 3.439499] PC is at 0x0 [ 3.442169] LR is at do_sync_write+0x7c/0xa4 [ 3.446643] pc : [<00000000>] lr : [<c011a79c>] psr: a0000013 [ 3.446643] sp : de047f00 ip : 00000000 fp : 00000001 [ 3.458652] r10: 00000000 r9 : bec7082c r8 : 00000180 [ 3.464120] r7 : 00000180 r6 : de047f80 r5 : 00000000 r4 : 00000000 [ 3.470951] r3 : 00000000 r2 : 00000001 r1 : de047f08 r0 : de047f10 [ 3.477785] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 3.485252] Control: 10c5387d Table: 9e0f4019 DAC: 00000015 [ 3.491265] Process init (pid: 1, stack limit = 0xde046248) [ 3.497097] Stack: (0xde047f00 to 0xde048000) [ 3.501666] 7f00: 00000000 00000000 bec7082c 00000180 de0ec6c0 00000000 00000000 00000000 [ 3.510229] 7f20: de044b00 00000000 00000000 00000000 00000000 00000000 00000180 00000000 [ 3.518792] 7f40: 00000000 00000000 de0ec6c0 bec7082c de047f80 c011b1b8 de0ec6c0 00000002 [ 3.527353] 7f60: de0ec6c0 00000000 00000000 de0ec6c0 de0ec6c0 00000180 bec7082c c011b778 [ 3.535916] 7f80: 00000000 00000000 bec7082c 00000000 b6f022d0 bec7082c 00000004 c000e764 [ 3.544478] 7fa0: de046000 c000e5a0 00000000 b6f022d0 00000000 bec7082c 00000180 b6f022d0 [ 3.553041] 7fc0: 00000000 b6f022d0 bec7082c 00000004 00000000 b6f04fc0 ffffffff 00000001 [ 3.561603] 7fe0: 00000004 bec70520 b6ed6bf7 b6e37f96 60000030 00000000 a53cffdf 7ddd69f9 [ 3.570183] [<c011a79c>] (do_sync_write) from [<c011b1b8>] (vfs_write+0xa4/0x174) [ 3.578024] [<c011b1b8>] (vfs_write) from [<c011b778>] (SyS_write+0x40/0x94) [ 3.585417] [<c011b778>] (SyS_write) from [<c000e5a0>] (ret_fast_syscall+0x0/0x48) [ 3.593351] Code: bad PC value [ 3.596640] ---[ end trace 82129d5339bf0249 ]--- [ 3.602331] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 3.602331] [ 3.611919] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 3.611919] ~$off # PYBOOT: Exception: panic Board beaver-multi_v7_defconfig failure log: ------------------------------------------------- [....] Checking file systems...[ 7.243744] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 7.251824] pgd = e89c8000 [ 7.254596] [00000000] *pgd=ff12a831 [ 7.258170] Internal error: Oops: 80000007 [#1] SMP ARM [ 7.263379] Modules linked in: [ 7.266432] CPU: 2 PID: 1032 Comm: logsave Not tainted 3.15.0-rc2-next-20140423 #1 [ 7.273985] task: e8838f00 ti: e88ac000 task.ti: e88ac000 [ 7.279370] PC is at 0x0 [ 7.281899] LR is at do_sync_write+0x80/0xa8 [ 7.286157] pc : [<00000000>] lr : [<c02e1888>] psr: a0000013 [ 7.286157] sp : e88adef8 ip : 00000000 fp : bea1bf2b [ 7.297610] r10: 00000000 r9 : 00009104 r8 : 00000007 [ 7.302821] r7 : e8838f00 r6 : e88adf80 r5 : 00000000 r4 : 00000000 [ 7.309331] r3 : 00000000 r2 : 00000001 r1 : e88adf00 r0 : e88adf08 [ 7.315844] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 7.322961] Control: 10c5387d Table: a89c804a DAC: 00000015 [ 7.328692] Process logsave (pid: 1032, stack limit = 0xe88ac250) [ 7.334771] Stack: (0xe88adef8 to 0xe88ae000) [ 7.339115] dee0: 00000000 00000000 [ 7.347275] df00: 00009104 00000007 e9d5b9c0 00000000 00000000 00000000 e8838f00 00000000 [ 7.355435] df20: 00000000 00000000 00000000 00000000 00000007 00000000 00000000 00000000 [ 7.363599] df40: e9d5b9c0 e9d5b9c0 00009104 e88adf80 00000007 c02e2200 e91c6cf8 00000020 [ 7.371758] df60: 00000000 00000000 00000000 e9d5b9c0 e9d5b9c0 00000007 00009104 c02e27c8 [ 7.379918] df80: 00000000 00000000 e88ac000 00000007 00009104 00000000 00000004 c020e824 [ 7.388079] dfa0: e88ac000 c020e6a0 00000007 00009104 00000003 00009104 00000007 00000066 [ 7.396240] dfc0: 00000007 00009104 00000000 00000004 bea1be14 00000003 00000039 bea1bf2b [ 7.404401] dfe0: 00000003 bea1bb88 00008ead b6f44b9c 40000010 00000003 00000000 00000000 [ 7.412569] [<c02e1888>] (do_sync_write) from [<c02e2200>] (vfs_write+0xa4/0x174) [ 7.420038] [<c02e2200>] (vfs_write) from [<c02e27c8>] (SyS_write+0x40/0x94) [ 7.427083] [<c02e27c8>] (SyS_write) from [<c020e6a0>] (ret_fast_syscall+0x0/0x30) [ 7.434638] Code: bad PC value [ 7.437705] ---[ end trace 46dbc25db1657911 ]--- Segmentation fault [?25l[?1c7[1G[[31mFAIL[39;49m8[?25h[?0c[31mfailed (code 139).[39;49m [....] File system check failed. A log is being saved in /var/log/fsck/checkfs if that location is writable. Please repair the file system manually. ...[?25l[?1c7[1G[[31mFAIL[39;49m8[?25h[?0c [31mfailed![39;49m [....] A maintenance shell will now be started. CONTROL-D will terminate this shell and resume system boot. ...[?25l[?1c7[1G[[33mwarn[39;49m8[?25h[?0c [33m(warning).[39;49m Give root password for maintenance (or type Control-D to continue): [ 12.065692] random: nonblocking pool is initialized ~$off # PYBOOT: Exception: timeout Board beaver-tegra_defconfig failure log: ------------------------------------------------- [....] Checking file systems...[ 7.546839] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 7.554919] pgd = e94ec000 [ 7.557803] [00000000] *pgd=a99b1831, *pte=00000000, *ppte=00000000 [ 7.564078] Internal error: Oops: 80000007 [#1] PREEMPT SMP ARM [ 7.569980] Modules linked in: [ 7.573031] CPU: 2 PID: 1063 Comm: logsave Not tainted 3.15.0-rc2-next-20140423 #1 [ 7.580581] task: e9992e40 ti: e9418000 task.ti: e9418000 [ 7.585966] PC is at 0x0 [ 7.588496] LR is at do_sync_write+0x80/0xa8 [ 7.592752] pc : [<00000000>] lr : [<c00da604>] psr: a0000013 [ 7.592752] sp : e9419ef8 ip : 00000000 fp : beb43f2b [ 7.604201] r10: 00000000 r9 : 00009104 r8 : 00000007 [ 7.609410] r7 : e9992e40 r6 : e9419f80 r5 : 00000000 r4 : 00000000 [ 7.615918] r3 : 00000000 r2 : 00000001 r1 : e9419f00 r0 : e9419f08 [ 7.622428] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 7.629543] Control: 10c5387d Table: a94ec04a DAC: 00000015 [ 7.635271] Process logsave (pid: 1063, stack limit = 0xe9418240) [ 7.641347] Stack: (0xe9419ef8 to 0xe941a000) [ 7.645690] 9ee0: 00000000 00000000 [ 7.653846] 9f00: 00009104 00000007 e9ac1880 00000000 00000000 00000000 e9992e40 00000000 [ 7.662003] 9f20: 00000000 00000000 00000000 00000000 00000007 00000000 00000000 00000000 [ 7.670161] 9f40: e9ac1880 e9ac1880 00009104 e9419f80 00000007 c00daf84 e9ac1888 00000003 [ 7.678319] 9f60: e9d9eaf8 00000000 00000000 e9ac1880 e9ac1880 00000007 00009104 c00db54c [ 7.686476] 9f80: 00000000 00000000 e9418000 00000007 00009104 00000000 00000004 c000e7e4 [ 7.694633] 9fa0: e9418000 c000e660 00000007 00009104 00000003 00009104 00000007 00000066 [ 7.702789] 9fc0: 00000007 00009104 00000000 00000004 beb43e14 00000003 00000039 beb43f2b [ 7.710947] 9fe0: 00000003 beb43b88 00008ead b6f7cb9c 40000010 00000003 00000000 00000000 [ 7.719115] [<c00da604>] (do_sync_write) from [<c00daf84>] (vfs_write+0xa4/0x174) [ 7.726593] [<c00daf84>] (vfs_write) from [<c00db54c>] (SyS_write+0x40/0x94) [ 7.733653] [<c00db54c>] (SyS_write) from [<c000e660>] (ret_fast_syscall+0x0/0x30) [ 7.741228] Code: bad PC value [ 7.744968] ---[ end trace 98e2283be23a1104 ]--- Segmentation fault [?25l[?1c7[1G[[31mFAIL[39;49m8[?25h[?0c[31mfailed (code 139).[39;49m [....] File system check failed. A log is being saved in /var/log/fsck/checkfs if that location is writable. Please repair the file system manually. ...[?25l[?1c7[1G[[31mFAIL[39;49m8[?25h[?0c [31mfailed![39;49m [....] A maintenance shell will now be started. CONTROL-D will terminate this shell and resume system boot. ...[?25l[?1c7[1G[[33mwarn[39;49m8[?25h[?0c [33m(warning).[39;49m Give root password for maintenance (or type Control-D to continue): [ 12.030281] random: nonblocking pool is initialized ~$off # PYBOOT: Exception: timeout Board capri-bcm_defconfig failure log: ------------------------------------------------- [....] Checking file systems...[ 3.170000] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 3.180000] pgd = ee560000 [ 3.180000] [00000000] *pgd=be45b831, *pte=00000000, *ppte=00000000 [ 3.180000] Internal error: Oops: 80000007 [#1] PREEMPT ARM [ 3.180000] Modules linked in: [ 3.180000] CPU: 0 PID: 973 Comm: logsave Not tainted 3.15.0-rc2-next-20140423 #1 [ 3.180000] task: ee48ea80 ti: ee42a000 task.ti: ee42a000 [ 3.180000] PC is at 0x0 [ 3.180000] LR is at do_sync_write+0x80/0xa8 [ 3.180000] pc : [<00000000>] lr : [<c00a5c50>] psr: a0000013 [ 3.180000] sp : ee42bef8 ip : 00000000 fp : bea9ef2b [ 3.180000] r10: 00000000 r9 : 00009104 r8 : 00000007 [ 3.180000] r7 : ee48ea80 r6 : ee42bf80 r5 : 00000000 r4 : 00000000 [ 3.180000] r3 : 00000000 r2 : 00000001 r1 : ee42bf00 r0 : ee42bf08 [ 3.180000] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 3.180000] Control: 10c53c7d Table: be560059 DAC: 00000015 [ 3.180000] Process logsave (pid: 973, stack limit = 0xee42a240) [ 3.180000] Stack: (0xee42bef8 to 0xee42c000) [ 3.180000] bee0: 00000000 00000000 [ 3.180000] bf00: 00009104 00000007 ee444cc0 00000000 00000000 00000000 ee48ea80 00000000 [ 3.180000] bf20: 00000000 00000000 00000000 00000000 00000007 00000000 00000000 00000000 [ 3.180000] bf40: ee42bf80 ee444cc0 00009104 ee42bf80 00000007 c00a662c ee91efd8 00000020 [ 3.180000] bf60: 00000000 00000000 00000000 ee444cc0 ee444cc0 00000007 00009104 c00a6bf4 [ 3.180000] bf80: 00000000 00000000 ee42a000 00000007 00009104 00000000 00000004 c000e404 [ 3.180000] bfa0: ee42a000 c000e280 00000007 00009104 00000003 00009104 00000007 00000066 [ 3.180000] bfc0: 00000007 00009104 00000000 00000004 bea9ee14 00000003 00000039 bea9ef2b [ 3.180000] bfe0: 00000003 bea9eb88 00008ead b6f13b9c 40000010 00000003 bf7fd821 bf7fdc21 [ 3.180000] [<c00a5c50>] (do_sync_write) from [<c00a662c>] (vfs_write+0xa4/0x174) [ 3.180000] [<c00a662c>] (vfs_write) from [<c00a6bf4>] (SyS_write+0x40/0x94) [ 3.180000] [<c00a6bf4>] (SyS_write) from [<c000e280>] (ret_fast_syscall+0x0/0x30) [ 3.180000] Code: bad PC value [ 3.190000] ---[ end trace d22c1b809a21f6ce ]--- Segmentation fault [?25l[?1c7[1G[[31mFAIL[39;49m8[?25h[?0c[31mfailed (code 139).[39;49m [....] File system check failed. A log is being saved in /var/log/fsck/checkfs if that location is writable. Please repair the file system manually. ...[?25l[?1c7[1G[[31mFAIL[39;49m8[?25h[?0c [31mfailed![39;49m [....] A maintenance shell will now be started. CONTROL-D will terminate this shell and resume system boot. ...[?25l[?1c7[1G[[33mwarn[39;49m8[?25h[?0c [33m(warning).[39;49m Give root password for maintenance (or type Control-D to continue): [ 12.840000] random: nonblocking pool is initialized ~$off # PYBOOT: Exception: timeout Board capri-multi_v7_defconfig failure log: ------------------------------------------------- [....] Checking file systems...[ 3.910000] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 3.910000] pgd = e9874000 [ 3.920000] [00000000] *pgd=baf27831, *pte=00000000, *ppte=00000000 [ 3.920000] Internal error: Oops: 80000007 [#1] SMP ARM [ 3.920000] Modules linked in: [ 3.920000] CPU: 0 PID: 988 Comm: logsave Not tainted 3.15.0-rc2-next-20140423 #1 [ 3.920000] task: eac6b2c0 ti: e9856000 task.ti: e9856000 [ 3.920000] PC is at 0x0 [ 3.920000] LR is at do_sync_write+0x80/0xa8 [ 3.920000] pc : [<00000000>] lr : [<c02e1888>] psr: a0000013 [ 3.920000] sp : e9857ef8 ip : 00000000 fp : be9abf2b [ 3.920000] r10: 00000000 r9 : 00009104 r8 : 00000007 [ 3.920000] r7 : eac6b2c0 r6 : e9857f80 r5 : 00000000 r4 : 00000000 [ 3.920000] r3 : 00000000 r2 : 00000001 r1 : e9857f00 r0 : e9857f08 [ 3.920000] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 3.920000] Control: 10c5387d Table: b987404a DAC: 00000015 [ 3.920000] Process logsave (pid: 988, stack limit = 0xe9856250) [ 3.920000] Stack: (0xe9857ef8 to 0xe9858000) [ 3.920000] 7ee0: 00000000 00000000 [ 3.920000] 7f00: 00009104 00000007 eac64180 00000000 00000000 00000000 eac6b2c0 00000000 [ 3.920000] 7f20: 00000000 00000000 00000000 00000000 00000007 00000000 00000000 00000000 [ 3.920000] 7f40: eac64180 eac64180 00009104 e9857f80 00000007 c02e2200 ea277460 00000020 [ 3.920000] 7f60: 00000000 00000000 00000000 eac64180 eac64180 00000007 00009104 c02e27c8 [ 3.920000] 7f80: 00000000 00000000 e9856000 00000007 00009104 00000000 00000004 c020e824 [ 3.920000] 7fa0: e9856000 c020e6a0 00000007 00009104 00000003 00009104 00000007 00000066 [ 3.920000] 7fc0: 00000007 00009104 00000000 00000004 be9abe14 00000003 00000039 be9abf2b [ 3.920000] 7fe0: 00000003 be9abb88 00008ead b6f7ab9c 40000010 00000003 c0c0c0c0 c0c0c0c0 [ 3.920000] [<c02e1888>] (do_sync_write) from [<c02e2200>] (vfs_write+0xa4/0x174) [ 3.920000] [<c02e2200>] (vfs_write) from [<c02e27c8>] (SyS_write+0x40/0x94) [ 3.920000] [<c02e27c8>] (SyS_write) from [<c020e6a0>] (ret_fast_syscall+0x0/0x30) [ 3.920000] Code: bad PC value [ 3.930000] ---[ end trace 062a6ade4e1b14e3 ]--- Segmentation fault [?25l[?1c7[1G[[31mFAIL[39;49m8[?25h[?0c[31mfailed (code 139).[39;49m [....] File system check failed. A log is being saved in /var/log/fsck/checkfs if that location is writable. Please repair the file system manually. ...[?25l[?1c7[1G[[31mFAIL[39;49m8[?25h[?0c [31mfailed![39;49m [....] A maintenance shell will now be started. CONTROL-D will terminate this shell and resume system boot. ...[?25l[?1c7[1G[[33mwarn[39;49m8[?25h[?0c [33m(warning).[39;49m Give root password for maintenance (or type Control-D to continue): [ 95.200000] random: nonblocking pool is initialized ~$off # PYBOOT: Exception: timeout Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.018132] platform ahci-5v.2: Driver reg-fixed-voltage requests probe deferral [ 0.018155] reg-fixed-voltage usb1-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 0.018168] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.018188] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.018201] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.019242] Switched to clocksource arch_sys_counter [ 0.026492] NET: Registered protocol family 2 [ 0.026953] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.027041] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.027163] TCP: Hash tables configured (established 8192 bind 8192) [ 0.027244] TCP: reno registered [ 0.027261] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.027316] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.027535] NET: Registered protocol family 1 [ 0.027939] RPC: Registered named UNIX socket transport module. [ 0.027953] RPC: Registered udp transport module. [ 0.027959] RPC: Registered tcp transport module. [ 0.027966] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.029021] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.029673] bounce: pool size: 64 pages [ 0.037520] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.037544] io scheduler noop registered [ 0.037556] io scheduler deadline registered [ 0.037744] io scheduler cfq registered (default) [ 0.039474] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.081546] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.083973] console [ttyS0] disabled [ 0.104160] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.619560] console [ttyS0] enabled [ 0.624322] mousedev: PS/2 mouse device common for all mice [ 0.630229] i2c /dev entries driver [ 0.635058] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.644215] TCP: cubic registered [ 0.647542] NET: Registered protocol family 17 [ 0.652132] Registering SWP/SWPB emulation handler [ 0.657911] ahci-5v: 5000 mV [ 0.661208] usb1-vbus: 5000 mV [ 0.664575] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout Board dalmore-multi_lpae_defconfig failure log: ------------------------------------------------- [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...[ 15.312115] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 15.320425] pgd = e9f14d00 [ 15.323164] [00000000] *pgd=a8a31003, *pmd=ff059003 [ 15.328241] Internal error: Oops: 80000207 [#1] SMP ARM [ 15.333488] Modules linked in: [ 15.336635] CPU: 1 PID: 1044 Comm: logsave Not tainted 3.15.0-rc2-next-20140423 #1 [ 15.344243] task: e9a3b480 ti: e8896000 task.ti: e8896000 [ 15.349680] PC is at 0x0 [ 15.352257] LR is at do_sync_write+0x80/0xa8 [ 15.356574] pc : [<00000000>] lr : [<c02e5030>] psr: a0000013 [ 15.356574] sp : e8897ef8 ip : 00000000 fp : be92ef2b [ 15.368088] r10: 00000000 r9 : 00009104 r8 : 00000007 [ 15.373338] r7 : e9a3b480 r6 : e8897f80 r5 : 00000000 r4 : 00000000 [ 15.379899] r3 : 00000000 r2 : 00000001 r1 : e8897f00 r0 : e8897f08 [ 15.386469] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 15.393644] Control: 30c5387d Table: a9f14d00 DAC: 55555555 [ 15.399421] Process logsave (pid: 1044, stack limit = 0xe8896250) [ 15.405554] Stack: (0xe8897ef8 to 0xe8898000) [ 15.409942] 7ee0: 00000000 00000000 [ 15.418167] 7f00: 00009104 00000007 e9f5e9c0 00000000 00000000 00000000 e9a3b480 00000000 [ 15.426394] 7f20: 00000000 00000000 00000000 00000000 00000007 00000000 00000000 00000000 [ 15.434626] 7f40: e9f5e9c0 e9f5e9c0 00009104 e8897f80 00000007 c02e59a8 e9355bb0 00000020 [ 15.442833] 7f60: 00000000 00000000 00000000 e9f5e9c0 e9f5e9c0 00000007 00009104 c02e5f70 [ 15.451055] 7f80: 00000000 00000000 e8896000 00000007 00009104 00000000 00000004 c020e864 [ 15.459284] 7fa0: e8896000 c020e6e0 00000007 00009104 00000003 00009104 00000007 00000066 [ 15.467512] 7fc0: 00000007 00009104 00000000 00000004 be92ee14 00000003 00000039 be92ef2b [ 15.475743] 7fe0: 00000003 be92eb88 00008ead b6ecfb9c 40000010 00000003 ffffffff ffffffff [ 15.483999] [<c02e5030>] (do_sync_write) from [<c02e59a8>] (vfs_write+0xa4/0x174) [ 15.491546] [<c02e59a8>] (vfs_write) from [<c02e5f70>] (SyS_write+0x40/0x94) [ 15.498686] [<c02e5f70>] (SyS_write) from [<c020e6e0>] (ret_fast_syscall+0x0/0x30) [ 15.506314] Code: bad PC value [ 15.509539] ---[ end trace 401efd67fd38385f ]--- Segmentation fault [?25l[?1c7[1G[[31mFAIL[39;49m8[?25h[?0c[31mfailed (code 139).[39;49m [....] File system check failed. A log is being saved in /var/log/fsck/checkfs if that location is writable. Please repair the file system manually. ...[?25l[?1c7[1G[[31mFAIL[39;49m8[?25h[?0c [31mfailed![39;49m [....] A maintenance shell will now be started. CONTROL-D will terminate this shell and resume system boot. ...[?25l[?1c7[1G[[33mwarn[39;49m8[?25h[?0c [33m(warning).[39;49m Give root password for maintenance (or type Control-D to continue): ~$off # PYBOOT: Exception: timeout Board dalmore-multi_v7_defconfig failure log: ------------------------------------------------- [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...[ 15.100408] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 15.108663] pgd = e88a8000 [ 15.111397] [00000000] *pgd=ff054831 [ 15.115132] Internal error: Oops: 80000007 [#1] SMP ARM [ 15.120376] Modules linked in: [ 15.123517] CPU: 3 PID: 1038 Comm: logsave Not tainted 3.15.0-rc2-next-20140423 #1 [ 15.131120] task: e9e712c0 ti: e9eb0000 task.ti: e9eb0000 [ 15.136561] PC is at 0x0 [ 15.139142] LR is at do_sync_write+0x80/0xa8 [ 15.143462] pc : [<00000000>] lr : [<c02e1888>] psr: a0000013 [ 15.143462] sp : e9eb1ef8 ip : 00000000 fp : bea61f2b [ 15.154976] r10: 00000000 r9 : 00009104 r8 : 00000007 [ 15.160223] r7 : e9e712c0 r6 : e9eb1f80 r5 : 00000000 r4 : 00000000 [ 15.166781] r3 : 00000000 r2 : 00000001 r1 : e9eb1f00 r0 : e9eb1f08 [ 15.173346] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 15.180525] Control: 10c5387d Table: a88a806a DAC: 00000015 [ 15.186318] Process logsave (pid: 1038, stack limit = 0xe9eb0250) [ 15.192432] Stack: (0xe9eb1ef8 to 0xe9eb2000) [ 15.196831] 1ee0: 00000000 00000000 [ 15.205058] 1f00: 00009104 00000007 e9e47900 00000000 00000000 00000000 e9e712c0 00000000 [ 15.213273] 1f20: 00000000 00000000 00000000 00000000 00000007 00000000 00000000 00000000 [ 15.221506] 1f40: e9e47900 e9e47900 00009104 e9eb1f80 00000007 c02e2200 e91f51d0 00000020 [ 15.229733] 1f60: 00000000 00000000 00000000 e9e47900 e9e47900 00000007 00009104 c02e27c8 [ 15.237961] 1f80: 00000000 00000000 e9eb0000 00000007 00009104 00000000 00000004 c020e824 [ 15.246188] 1fa0: e9eb0000 c020e6a0 00000007 00009104 00000003 00009104 00000007 00000066 [ 15.254415] 1fc0: 00000007 00009104 00000000 00000004 bea61e14 00000003 00000039 bea61f2b [ 15.262621] 1fe0: 00000003 bea61b88 00008ead b6f18b9c 40000010 00000003 00000000 00000000 [ 15.270880] [<c02e1888>] (do_sync_write) from [<c02e2200>] (vfs_write+0xa4/0x174) [ 15.278443] [<c02e2200>] (vfs_write) from [<c02e27c8>] (SyS_write+0x40/0x94) [ 15.285584] [<c02e27c8>] (SyS_write) from [<c020e6a0>] (ret_fast_syscall+0x0/0x30) [ 15.293214] Code: bad PC value [ 15.296413] ---[ end trace a23c03f4204e5127 ]--- Segmentation fault [?25l[?1c7[1G[[31mFAIL[39;49m8[?25h[?0c[31mfailed (code 139).[39;49m [....] File system check failed. A log is being saved in /var/log/fsck/checkfs if that location is writable. Please repair the file system manually. ...[?25l[?1c7[1G[[31mFAIL[39;49m8[?25h[?0c [31mfailed![39;49m [....] A maintenance shell will now be started. CONTROL-D will terminate this shell and resume system boot. ...[?25l[?1c7[1G[[33mwarn[39;49m8[?25h[?0c [33m(warning).[39;49m Give root password for maintenance (or type Control-D to continue): ~$off # PYBOOT: Exception: timeout Board dalmore-tegra_defconfig failure log: ------------------------------------------------- [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...[ 16.515660] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 16.524088] pgd = ea2e4000 [ 16.526853] [00000000] *pgd=a9b12831, *pte=00000000, *ppte=00000000 [ 16.533245] Internal error: Oops: 80000007 [#1] PREEMPT SMP ARM [ 16.539194] Modules linked in: [ 16.542327] CPU: 3 PID: 1163 Comm: logsave Not tainted 3.15.0-rc2-next-20140423 #1 [ 16.549940] task: e94077c0 ti: e9628000 task.ti: e9628000 [ 16.555389] PC is at 0x0 [ 16.557970] LR is at do_sync_write+0x80/0xa8 [ 16.562270] pc : [<00000000>] lr : [<c00da604>] psr: a0000013 [ 16.562270] sp : e9629ef8 ip : 00000000 fp : be926f2b [ 16.573778] r10: 00000000 r9 : 00009104 r8 : 00000007 [ 16.579046] r7 : e94077c0 r6 : e9629f80 r5 : 00000000 r4 : 00000000 [ 16.585615] r3 : 00000000 r2 : 00000001 r1 : e9629f00 r0 : e9629f08 [ 16.592169] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 16.599342] Control: 10c5387d Table: aa2e406a DAC: 00000015 [ 16.605139] Process logsave (pid: 1163, stack limit = 0xe9628240) [ 16.611257] Stack: (0xe9629ef8 to 0xe962a000) [ 16.615659] 9ee0: 00000000 00000000 [ 16.623875] 9f00: 00009104 00000007 e9a3b100 00000000 00000000 00000000 e94077c0 00000000 [ 16.632099] 9f20: 00000000 00000000 00000000 00000000 00000007 00000000 00000000 00000000 [ 16.640328] 9f40: e9a3b100 e9a3b100 00009104 e9629f80 00000007 c00daf84 e9a3b108 00000003 [ 16.648559] 9f60: e9e0ab38 00000000 00000000 e9a3b100 e9a3b100 00000007 00009104 c00db54c [ 16.656787] 9f80: 00000000 00000000 e9628000 00000007 00009104 00000000 00000004 c000e7e4 [ 16.665008] 9fa0: e9628000 c000e660 00000007 00009104 00000003 00009104 00000007 00000066 [ 16.673233] 9fc0: 00000007 00009104 00000000 00000004 be926e14 00000003 00000039 be926f2b [ 16.681454] 9fe0: 00000003 be926b88 00008ead b6f66b9c 40000010 00000003 00000000 00000000 [ 16.689719] [<c00da604>] (do_sync_write) from [<c00daf84>] (vfs_write+0xa4/0x174) [ 16.697284] [<c00daf84>] (vfs_write) from [<c00db54c>] (SyS_write+0x40/0x94) [ 16.704404] [<c00db54c>] (SyS_write) from [<c000e660>] (ret_fast_syscall+0x0/0x30) [ 16.712025] Code: bad PC value [ 16.715318] ---[ end trace 390facc022f29c42 ]--- Segmentation fault [?25l[?1c7[1G[[31mFAIL[39;49m8[?25h[?0c[31mfailed (code 139).[39;49m [....] File system check failed. A log is being saved in /var/log/fsck/checkfs if that location is writable. Please repair the file system manually. ...[?25l[?1c7[1G[[31mFAIL[39;49m8[?25h[?0c [31mfailed![39;49m [....] A maintenance shell will now be started. CONTROL-D will terminate this shell and resume system boot. ...[?25l[?1c7[1G[[33mwarn[39;49m8[?25h[?0c [33m(warning).[39;49m Give root password for maintenance (or type Control-D to continue): ~$off # PYBOOT: Exception: timeout Board hummingboard-imx_v6_v7_defconfig failure log: ------------------------------------------------- Internal error: Oops: 80000007 [#2] SMP ARM Modules linked in: CPU: 0 PID: 1100 Comm: logsave Tainted: G D 3.15.0-rc2-next-20140423 #1 task: 9d019d40 ti: 9ddda000 task.ti: 9ddda000 PC is at 0x0 LR is at do_sync_write+0x84/0xac pc : [<00000000>] lr : [<800e4f28>] psr: a0000013 sp : 9dddbee0 ip : 00000000 fp : 9dddbf44 r10: 00000000 r9 : 00009104 r8 : 00000007 r7 : 00000007 r6 : 9dddbf78 r5 : 00000000 r4 : 00000000 r3 : 00000000 r2 : 00000001 r1 : 9dddbee8 r0 : 9dddbef0 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: 2dfa8059 DAC: 00000015 Process logsave (pid: 1100, stack limit = 0x9ddda240) Stack: (0x9dddbee0 to 0x9dddc000) bee0: 00000000 00000000 00009104 00000007 9dfedc80 00000000 00000000 00000000 bf00: 9d019d40 00000000 00000000 00000000 00000000 00000000 00000007 00000000 bf20: 00000000 00000000 00000007 9dfedc80 00009104 9dddbf78 9dddbf74 9dddbf48 bf40: 800e5980 800e4eb0 00000066 00000007 00000000 00000000 9dfedc80 9dfedc80 bf60: 00000007 00009104 9dddbfa4 9dddbf78 800e5f64 800e58e0 00000000 00000000 bf80: 00000007 00009104 00000000 00000004 8000eb84 9ddda000 00000000 9dddbfa8 bfa0: 8000e9c0 800e5f2c 00000007 00009104 00000003 00009104 00000007 00000066 bfc0: 00000007 00009104 00000000 00000004 7ea6ee14 00000003 00000039 7ea6ef2b bfe0: 00000003 7ea6eb88 00008ead 76ed2b9c 40000010 00000003 00000000 00000000 Backtrace: [<800e4ea4>] (do_sync_write) from [<800e5980>] (vfs_write+0xac/0x17c) r6:9dddbf78 r5:00009104 r4:9dfedc80 [<800e58d4>] (vfs_write) from [<800e5f64>] (SyS_write+0x44/0x98) r9:00009104 r8:00000007 r7:9dfedc80 r6:9dfedc80 r5:00000000 r4:00000000 [<800e5f20>] (SyS_write) from [<8000e9c0>] (ret_fast_syscall+0x0/0x48) r9:9ddda000 r8:8000eb84 r7:00000004 r6:00000000 r5:00009104 r4:00000007 Code: bad PC value ---[ end trace 37a46bce68761cd0 ]--- Segmentation fault [?25l[?1c7[1G[[31mFAIL[39;49m8[?25h[?0c[31mfailed (code 139).[39;49m [....] File system check failed. A log is being saved in /var/log/fsck/checkfs if that location is writable. Please repair the file system manually. ...[?25l[?1c7[1G[[31mFAIL[39;49m8[?25h[?0c [31mfailed![39;49m [....] A maintenance shell will now be started. CONTROL-D will terminate this shell and resume system boot. ...[?25l[?1c7[1G[[33mwarn[39;49m8[?25h[?0c [33m(warning).[39;49m Give root password for maintenance (or type Control-D to continue): ~$off # PYBOOT: Exception: timeout Board hummingboard-multi_v7_defconfig failure log: ------------------------------------------------- [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...[ 8.170616] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 8.178781] pgd = db61c000 [ 8.181495] [00000000] *pgd=2b43d831, *pte=00000000, *ppte=00000000 [ 8.187843] Internal error: Oops: 80000007 [#2] SMP ARM [ 8.193071] Modules linked in: [ 8.196150] CPU: 0 PID: 1071 Comm: logsave Tainted: G D 3.15.0-rc2-next-20140423 #1 [ 8.204766] task: da077840 ti: db740000 task.ti: db740000 [ 8.210170] PC is at 0x0 [ 8.212715] LR is at do_sync_write+0x80/0xa8 [ 8.216991] pc : [<00000000>] lr : [<c02e1888>] psr: a0000013 [ 8.216991] sp : db741ef8 ip : 00000000 fp : bef29f2b [ 8.228470] r10: 00000000 r9 : 00009104 r8 : 00000007 [ 8.233698] r7 : da077840 r6 : db741f80 r5 : 00000000 r4 : 00000000 [ 8.240227] r3 : 00000000 r2 : 00000001 r1 : db741f00 r0 : db741f08 [ 8.246759] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 8.253897] Control: 10c5387d Table: 2b61c059 DAC: 00000015 [ 8.259645] Process logsave (pid: 1071, stack limit = 0xdb740250) [ 8.265742] Stack: (0xdb741ef8 to 0xdb742000) [ 8.270105] 1ee0: 00000000 00000000 [ 8.278289] 1f00: 00009104 00000007 db51d000 00000000 00000000 00000000 da077840 00000000 [ 8.286472] 1f20: 00000000 00000000 00000000 00000000 00000007 00000000 00000000 00000000 [ 8.294656] 1f40: db51d000 db51d000 00009104 db741f80 00000007 c02e2200 dab26f70 00000020 [ 8.302838] 1f60: 00000000 00000000 00000000 db51d000 db51d000 00000007 00009104 c02e27c8 [ 8.311021] 1f80: 00000000 00000000 db740000 00000007 00009104 00000000 00000004 c020e824 [ 8.319204] 1fa0: db740000 c020e6a0 00000007 00009104 00000003 00009104 00000007 00000066 [ 8.327386] 1fc0: 00000007 00009104 00000000 00000004 bef29e14 00000003 00000039 bef29f2b [ 8.335569] 1fe0: 00000003 bef29b88 00008ead b6ea6b9c 40000010 00000003 e59f114c eb00b99b [ 8.343762] [<c02e1888>] (do_sync_write) from [<c02e2200>] (vfs_write+0xa4/0x174) [ 8.351254] [<c02e2200>] (vfs_write) from [<c02e27c8>] (SyS_write+0x40/0x94) [ 8.358317] [<c02e27c8>] (SyS_write) from [<c020e6a0>] (ret_fast_syscall+0x0/0x30) [ 8.365894] Code: bad PC value [ 8.369000] ---[ end trace 955b87b5d87edf78 ]--- Segmentation fault [?25l[?1c7[1G[[31mFAIL[39;49m8[?25h[?0c[31mfailed (code 139).[39;49m [....] File system check failed. A log is being saved in /var/log/fsck/checkfs if that location is writable. Please repair the file system manually. ...[?25l[?1c7[1G[[31mFAIL[39;49m8[?25h[?0c [31mfailed![39;49m [....] A maintenance shell will now be started. CONTROL-D will terminate this shell and resume system boot. ...[?25l[?1c7[1G[[33mwarn[39;49m8[?25h[?0c [33m(warning).[39;49m Give root password for maintenance (or type Control-D to continue): ~$off # PYBOOT: Exception: timeout Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...[ 50.018399] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 50.026890] pgd = e9da9a40 [ 50.029712] [00000000] *pgd=a8dc8003, *pmd=a9e9a003, *pte=00000000 [ 50.036194] Internal error: Oops: 80000207 [#1] SMP ARM [ 50.041641] Modules linked in: [ 50.044829] CPU: 0 PID: 1168 Comm: logsave Tainted: G W 3.15.0-rc2-next-20140423 #1 [ 50.053819] task: e8c88f00 ti: e8e50000 task.ti: e8e50000 [ 50.059446] PC is at 0x0 [ 50.062092] LR is at do_sync_write+0x80/0xa8 [ 50.066542] pc : [<00000000>] lr : [<c02e5030>] psr: a0000013 [ 50.066542] sp : e8e51ef8 ip : 00000000 fp : befebf2b [ 50.078531] r10: 00000000 r9 : 00009104 r8 : 00000007 [ 50.083981] r7 : e8c88f00 r6 : e8e51f80 r5 : 00000000 r4 : 00000000 [ 50.090791] r3 : 00000000 r2 : 00000001 r1 : e8e51f00 r0 : e8e51f08 [ 50.097601] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 50.105053] Control: 30c5387d Table: a9da9a40 DAC: fffffffd [ 50.111059] Process logsave (pid: 1168, stack limit = 0xe8e50250) [ 50.117422] Stack: (0xe8e51ef8 to 0xe8e52000) [ 50.121958] 1ee0: 00000000 00000000 [ 50.130488] 1f00: 00009104 00000007 e9de6840 00000000 00000000 00000000 e8c88f00 00000000 [ 50.139026] 1f20: 00000000 00000000 00000000 00000000 00000007 00000000 00000000 00000000 [ 50.147554] 1f40: e9de6840 e9de6840 00009104 e8e51f80 00000007 c02e59a8 e9342318 00000020 [ 50.156091] 1f60: 00000000 00000000 00000000 e9de6840 e9de6840 00000007 00009104 c02e5f70 [ 50.164623] 1f80: 00000000 00000000 e8e50000 00000007 00009104 00000000 00000004 c020e864 [ 50.173162] 1fa0: e8e50000 c020e6e0 00000007 00009104 00000003 00009104 00000007 00000066 [ 50.181703] 1fc0: 00000007 00009104 00000000 00000004 befebe14 00000003 00000039 befebf2b [ 50.190249] 1fe0: 00000003 befebb88 00008ead b6e9eb9c 40000010 00000003 00000000 00000000 [ 50.198796] [<c02e5030>] (do_sync_write) from [<c02e59a8>] (vfs_write+0xa4/0x174) [ 50.206606] [<c02e59a8>] (vfs_write) from [<c02e5f70>] (SyS_write+0x40/0x94) [ 50.213967] [<c02e5f70>] (SyS_write) from [<c020e6e0>] (ret_fast_syscall+0x0/0x30) [ 50.221872] Code: bad PC value [ 50.225081] ---[ end trace ea60d82d1d2e03ee ]--- Segmentation fault [?25l[?1c7[1G[[31mFAIL[39;49m8[?25h[?0c[31mfailed (code 139).[39;49m [....] File system check failed. A log is being saved in /var/log/fsck/checkfs if that location is writable. Please repair the file system manually. ...[?25l[?1c7[1G[[31mFAIL[39;49m8[?25h[?0c [31mfailed![39;49m [....] A maintenance shell will now be started. CONTROL-D will terminate this shell and resume system boot. ...[?25l[?1c7[1G[[33mwarn[39;49m8[?25h[?0c [33m(warning).[39;49m Give root password for maintenance (or type Control-D to continue): ~$off # PYBOOT: Exception: timeout Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...[ 50.875446] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 50.883969] pgd = e8f74000 [ 50.886789] [00000000] *pgd=fe23d831 [ 50.890521] Internal error: Oops: 80000007 [#1] SMP ARM [ 50.895971] Modules linked in: [ 50.899162] CPU: 0 PID: 1167 Comm: logsave Tainted: G W 3.15.0-rc2-next-20140423 #1 [ 50.908153] task: e8ae8b40 ti: e8f9a000 task.ti: e8f9a000 [ 50.913789] PC is at 0x0 [ 50.916434] LR is at do_sync_write+0x80/0xa8 [ 50.920892] pc : [<00000000>] lr : [<c02e1888>] psr: a0000013 [ 50.920892] sp : e8f9bef8 ip : 00000000 fp : becc5f2b [ 50.932878] r10: 00000000 r9 : 00009104 r8 : 00000007 [ 50.938336] r7 : e8ae8b40 r6 : e8f9bf80 r5 : 00000000 r4 : 00000000 [ 50.945147] r3 : 00000000 r2 : 00000001 r1 : e8f9bf00 r0 : e8f9bf08 [ 50.951964] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 50.959404] Control: 10c5387d Table: a8f7406a DAC: 00000015 [ 50.965395] Process logsave (pid: 1167, stack limit = 0xe8f9a250) [ 50.971755] Stack: (0xe8f9bef8 to 0xe8f9c000) [ 50.976302] bee0: 00000000 00000000 [ 50.984847] bf00: 00009104 00000007 e9e46000 00000000 00000000 00000000 e8ae8b40 00000000 [ 50.993375] bf20: 00000000 00000000 00000000 00000000 00000007 00000000 00000000 00000000 [ 51.001915] bf40: e9e46000 e9e46000 00009104 e8f9bf80 00000007 c02e2200 e932b460 00000020 [ 51.010450] bf60: 00000000 00000000 00000000 e9e46000 e9e46000 00000007 00009104 c02e27c8 [ 51.018982] bf80: 00000000 00000000 e8f9a000 00000007 00009104 00000000 00000004 c020e824 [ 51.027515] bfa0: e8f9a000 c020e6a0 00000007 00009104 00000003 00009104 00000007 00000066 [ 51.036052] bfc0: 00000007 00009104 00000000 00000004 becc5e14 00000003 00000039 becc5f2b [ 51.044592] bfe0: 00000003 becc5b88 00008ead b6f46b9c 40000010 00000003 ab7de821 ab7dec21 [ 51.053128] [<c02e1888>] (do_sync_write) from [<c02e2200>] (vfs_write+0xa4/0x174) [ 51.060938] [<c02e2200>] (vfs_write) from [<c02e27c8>] (SyS_write+0x40/0x94) [ 51.068303] [<c02e27c8>] (SyS_write) from [<c020e6a0>] (ret_fast_syscall+0x0/0x30) [ 51.076207] Code: bad PC value [ 51.079417] ---[ end trace d1c76e1832746bc2 ]--- Segmentation fault [?25l[?1c7[1G[[31mFAIL[39;49m8[?25h[?0c[31mfailed (code 139).[39;49m [....] File system check failed. A log is being saved in /var/log/fsck/checkfs if that location is writable. Please repair the file system manually. ...[?25l[?1c7[1G[[31mFAIL[39;49m8[?25h[?0c [31mfailed![39;49m [....] A maintenance shell will now be started. CONTROL-D will terminate this shell and resume system boot. ...[?25l[?1c7[1G[[33mwarn[39;49m8[?25h[?0c [33m(warning).[39;49m Give root password for maintenance (or type Control-D to continue): ~$off # PYBOOT: Exception: timeout Board omap5uevm-omap2plus_defconfig failure log: ------------------------------------------------- [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...[ 6.268139] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 6.276720] pgd = ebae4000 [ 6.279543] [00000000] *pgd=abba7831, *pte=00000000, *ppte=00000000 [ 6.286125] Internal error: Oops: 80000007 [#1] SMP ARM [ 6.291578] Modules linked in: [ 6.294772] CPU: 0 PID: 1774 Comm: logsave Tainted: G W 3.15.0-rc2-next-20140423 #1 [ 6.303758] task: ecf6b140 ti: ebb9e000 task.ti: ebb9e000 [ 6.309391] PC is at 0x0 [ 6.312037] LR is at do_sync_write+0x7c/0xa4 [ 6.316492] pc : [<00000000>] lr : [<c011a79c>] psr: a0000013 [ 6.316492] sp : ebb9ff00 ip : 00000000 fp : beab9f2b [ 6.328476] r10: 00000000 r9 : 00009104 r8 : 00000007 [ 6.333931] r7 : 00000007 r6 : ebb9ff80 r5 : 00000000 r4 : 00000000 [ 6.340741] r3 : 00000000 r2 : 00000001 r1 : ebb9ff08 r0 : ebb9ff10 [ 6.347556] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 6.355011] Control: 10c5387d Table: abae406a DAC: 00000015 [ 6.361011] Process logsave (pid: 1774, stack limit = 0xebb9e248) [ 6.367372] Stack: (0xebb9ff00 to 0xebba0000) [ 6.371917] ff00: 00000000 00000000 00009104 00000007 ebb1ab80 00000000 00000000 00000000 [ 6.380451] ff20: ecf6b140 00000000 00000000 00000000 00000000 00000000 00000007 00000000 [ 6.388985] ff40: 00000000 00000000 ebb1ab80 00009104 ebb9ff80 c011b1b8 ebb1ab88 00000003 [ 6.397515] ff60: ebb9e038 00000000 00000000 ebb1ab80 ebb1ab80 00000007 00009104 c011b778 [ 6.406055] ff80: 00000000 00000000 00000000 00000007 00009104 00000000 00000004 c000e764 [ 6.414597] ffa0: ebb9e000 c000e5a0 00000007 00009104 00000003 00009104 00000007 00000066 [ 6.423130] ffc0: 00000007 00009104 00000000 00000004 beab9e14 00000003 00000039 beab9f2b [ 6.431665] ffe0: 00000003 beab9b88 00008ead b6f37b9c 40000010 00000003 00000000 00000000 [ 6.440204] [<c011a79c>] (do_sync_write) from [<c011b1b8>] (vfs_write+0xa4/0x174) [ 6.448019] [<c011b1b8>] (vfs_write) from [<c011b778>] (SyS_write+0x40/0x94) [ 6.455375] [<c011b778>] (SyS_write) from [<c000e5a0>] (ret_fast_syscall+0x0/0x48) [ 6.463284] Code: bad PC value [ 6.466496] ---[ end trace 1f8edc84b3b612cf ]--- Segmentation fault [?25l[?1c7[1G[[31mFAIL[39;49m8[?25h[?0c[31mfailed (code 139).[39;49m [....] File system check failed. A log is being saved in /var/log/fsck/checkfs if that location is writable. Please repair the file system manually. ...[?25l[?1c7[1G[[31mFAIL[39;49m8[?25h[?0c [31mfailed![39;49m [....] A maintenance shell will now be started. CONTROL-D will terminate this shell and resume system boot. ...[?25l[?1c7[1G[[33mwarn[39;49m8[?25h[?0c [33m(warning).[39;49m Give root password for maintenance (or type Control-D to continue): ~$off # PYBOOT: Exception: timeout Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [....] Checking file systems...[ 7.827606] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 7.836212] pgd = e933c000 [ 7.836242] [00000000] *pgd=aa7df831, *pte=00000000, *ppte=00000000 [ 7.836242] Internal error: Oops: 80000007 [#1] SMP ARM [ 7.846191] Modules linked in: [ 7.846191] CPU: 1 PID: 1095 Comm: logsave Not tainted 3.15.0-rc2-next-20140423 #1 [ 7.862274] task: e9230b40 ti: e91fe000 task.ti: e91fe000 [ 7.866088] PC is at 0x0 [ 7.869903] LR is at do_sync_write+0x80/0xa8 [ 7.875061] pc : [<00000000>] lr : [<c02e1888>] psr: a0000013 [ 7.875061] sp : e91ffef8 ip : 00000000 fp : beb97f2b [ 7.886138] r10: 00000000 r9 : 00009104 r8 : 00000007 [ 7.887115] r7 : e9230b40 r6 : e91fff80 r5 : 00000000 r4 : 00000000 [ 7.899414] r3 : 00000000 r2 : 00000001 r1 : e91fff00 r0 : e91fff08 [ 7.906249] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 7.913024] Control: 10c5387d Table: a933c04a DAC: 00000015 [ 7.919769] Process logsave (pid: 1095, stack limit = 0xe91fe250) [ 7.919769] Stack: (0xe91ffef8 to 0xe9200000) [ 7.930725] fee0: 00000000 00000000 [ 7.939300] ff00: 00009104 00000007 ea589e40 00000000 00000000 00000000 e9230b40 00000000 [ 7.946258] ff20: 00000000 00000000 00000000 00000000 00000007 00000000 00000000 00000000 [ 7.956268] ff40: ea589e40 ea589e40 00009104 e91fff80 00000007 c02e2200 e9b0fbc8 00000020 [ 7.959747] ff60: 00000000 00000000 00000000 ea589e40 ea589e40 00000007 00009104 c02e27c8 [ 7.972747] ff80: 00000000 00000000 e91fe000 00000007 00009104 00000000 00000004 c020e824 [ 7.979766] ffa0: e91fe000 c020e6a0 00000007 00009104 00000003 00009104 00000007 00000066 [ 7.986267] ffc0: 00000007 00009104 00000000 00000004 beb97e14 00000003 00000039 beb97f2b [ 7.996246] ffe0: 00000003 beb97b88 00008ead b6f0bb9c 40000010 00000003 00000000 00000000 [ 8.007904] [<c02e1888>] (do_sync_write) from [<c02e2200>] (vfs_write+0xa4/0x174) [ 8.015747] [<c02e2200>] (vfs_write) from [<c02e27c8>] (SyS_write+0x40/0x94) [ 8.016784] [<c02e27c8>] (SyS_write) from [<c020e6a0>] (ret_fast_syscall+0x0/0x30) [ 8.026245] Code: bad PC value [ 8.034301] ---[ end trace 48fa9d81cefc5a2d ]--- Segmentation fault [?25l[?1c7[1G[[31mFAIL[39;49m8[?25h[?0c[31mfailed (code 139).[39;49m [....] File system check failed. A log is being saved in /var/log/fsck/checkfs if that location is writable. Please repair the file system manually. ...[?25l[?1c7[1G[[31mFAIL[39;49m8[?25h[?0c [31mfailed![39;49m [....] A maintenance shell will now be started. CONTROL-D will terminate this shell and resume system boot. ...[?25l[?1c7[1G[[33mwarn[39;49m8[?25h[?0c [33m(warning).[39;49m Give root password for maintenance (or type Control-D to continue): [ 13.006622] gic_timer_retrigger: lost localtimer interrupt ~$off # PYBOOT: Exception: timeout Board panda-omap2plus_defconfig failure log: ------------------------------------------------- [ 8.304473] random: nonblocking pool is initialized [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...[ 9.622985] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 9.632446] pgd = ed524000 [ 9.632507] [00000000] *pgd=ac120831, *pte=00000000, *ppte=00000000 [ 9.641754] Internal error: Oops: 80000007 [#1] SMP ARM [ 9.642272] Modules linked in: [ 9.650726] CPU: 0 PID: 1799 Comm: logsave Tainted: G W 3.15.0-rc2-next-20140423 #1 [ 9.659088] task: ed7dd440 ti: ec2a4000 task.ti: ec2a4000 [ 9.659088] PC is at 0x0 [ 9.668090] LR is at do_sync_write+0x7c/0xa4 [ 9.668090] pc : [<00000000>] lr : [<c011a79c>] psr: a0000113 [ 9.668090] sp : ec2a5f00 ip : 00000000 fp : bedf4f2b [ 9.668090] r10: 00000000 r9 : 00009104 r8 : 00000007 [ 9.690093] r7 : 00000007 r6 : ec2a5f80 r5 : 00000000 r4 : 00000000 [ 9.690093] r3 : 00000000 r2 : 00000001 r1 : ec2a5f08 r0 : ec2a5f10 [ 9.703796] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 9.710906] Control: 10c5387d Table: ad52404a DAC: 00000015 [ 9.717315] Process logsave (pid: 1799, stack limit = 0xec2a4248) [ 9.717437] Stack: (0xec2a5f00 to 0xec2a6000) [ 9.727539] 5f00: 00000000 00000000 00009104 00000007 ed74b800 00000000 00000000 00000000 [ 9.727539] 5f20: ed7dd440 00000000 00000000 00000000 00000000 00000000 00000007 00000000 [ 9.737335] 5f40: 00000000 00000000 ed74b800 00009104 ec2a5f80 c011b1b8 ed74b808 00000003 [ 9.750976] 5f60: ec2a4038 00000000 00000000 ed74b800 ed74b800 00000007 00009104 c011b778 [ 9.757507] 5f80: 00000000 00000000 00000000 00000007 00009104 00000000 00000004 c000e764 [ 9.767333] 5fa0: ec2a4000 c000e5a0 00000007 00009104 00000003 00009104 00000007 00000066 [ 9.777404] 5fc0: 00000007 00009104 00000000 00000004 bedf4e14 00000003 00000039 bedf4f2b [ 9.787414] 5fe0: 00000003 bedf4b88 00008ead b6f3eb9c 40000110 00000003 00000000 00000000 [ 9.788360] [<c011a79c>] (do_sync_write) from [<c011b1b8>] (vfs_write+0xa4/0x174) [ 9.797393] [<c011b1b8>] (vfs_write) from [<c011b778>] (SyS_write+0x40/0x94) [ 9.797393] [<c011b778>] (SyS_write) from [<c000e5a0>] (ret_fast_syscall+0x0/0x48) [ 9.817260] Code: bad PC value [ 9.823425] ---[ end trace 7b9b6a8f2ceb5bdf ]--- Segmentation fault [?25l[?1c7[1G[[31mFAIL[39;49m8[?25h[?0c[31mfailed (code 139).[39;49m [....] File system check failed. A log is being saved in /var/log/fsck/checkfs if that location is writable. Please repair the file system manually. ...[?25l[?1c7[1G[[31mFAIL[39;49m8[?25h[?0c [31mfailed![39;49m [....] A maintenance shell will now be started. CONTROL-D will terminate this shell and resume system boot. ...[?25l[?1c7[1G[[33mwarn[39;49m8[?25h[?0c [33m(warning).[39;49m Give root password for maintenance (or type Control-D to continue): ~$off # PYBOOT: Exception: timeout Board sama5-sama5_defconfig failure log: ------------------------------------------------- Code: bad PC value ---[ end trace 40e58e11978132c9 ]--- Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = df73c000 [00000000] *pgd=3f720831, *pte=00000000, *ppte=00000000 Internal error: Oops: 80000007 [#2] ARM Modules linked in: CPU: 0 PID: 1 Comm: init Tainted: G D 3.15.0-rc2-next-20140423 #1 task: df43ba40 ti: df43c000 task.ti: df43c000 PC is at 0x0 LR is at do_sync_write+0x80/0xa8 pc : [<00000000>] lr : [<c008ac24>] psr: a0000013 sp : df43def8 ip : 00000000 fp : 00000001 r10: 00000000 r9 : bee4383c r8 : 00000180 r7 : df43ba40 r6 : df43df80 r5 : 00000000 r4 : 00000000 r3 : 00000000 r2 : 00000001 r1 : df43df00 r0 : df43df08 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c53c7d Table: 3f73c059 DAC: 00000015 Process init (pid: 1, stack limit = 0xdf43c238) Stack: (0xdf43def8 to 0xdf43e000) dee0: 00000000 00000000 df00: bee4383c 00000180 df531c40 00000000 00000000 00000000 df43ba40 00000000 df20: 00000000 00000000 00000000 00000000 00000180 00000000 00000000 00000000 df40: df43df80 df531c40 bee4383c df43df80 00000180 c008b540 df531c40 00000002 df60: df531c40 00000000 00000000 df531c40 df531c40 00000180 bee4383c c008bb08 df80: 00000000 00000000 00000002 00000000 b6f152d0 bee4383c 00000004 c000e404 dfa0: df43c000 c000e280 00000000 b6f152d0 00000000 bee4383c 00000180 b6f152d0 dfc0: 00000000 b6f152d0 bee4383c 00000004 00000000 b6f17fc0 ffffffff 00000001 dfe0: 00000004 bee43530 b6ee9bf7 b6e4af96 60000030 00000000 6bbaeffb 35fd7d7d [<c008ac24>] (do_sync_write) from [<c008b540>] (vfs_write+0xa4/0x174) [<c008b540>] (vfs_write) from [<c008bb08>] (SyS_write+0x40/0x94) [<c008bb08>] (SyS_write) from [<c000e280>] (ret_fast_syscall+0x0/0x30) Code: bad PC value ---[ end trace 40e58e11978132ca ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ~$off # PYBOOT: Exception: panic Board seaboard-multi_v7_defconfig failure log: ------------------------------------------------- [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...[ 6.896327] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 6.904404] pgd = e90bc000 [ 6.907178] [00000000] *pgd=3f842831 [ 6.910754] Internal error: Oops: 80000007 [#1] SMP ARM [ 6.915964] Modules linked in: [ 6.919018] CPU: 1 PID: 1021 Comm: logsave Not tainted 3.15.0-rc2-next-20140423 #1 [ 6.926570] task: ea647c00 ti: ea78e000 task.ti: ea78e000 [ 6.931955] PC is at 0x0 [ 6.934486] LR is at do_sync_write+0x80/0xa8 [ 6.938746] pc : [<00000000>] lr : [<c02e1888>] psr: a0000013 [ 6.938746] sp : ea78fef8 ip : 00000000 fp : bed3df2b [ 6.950199] r10: 00000000 r9 : 00009104 r8 : 00000007 [ 6.955409] r7 : ea647c00 r6 : ea78ff80 r5 : 00000000 r4 : 00000000 [ 6.961920] r3 : 00000000 r2 : 00000001 r1 : ea78ff00 r0 : ea78ff08 [ 6.968432] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 6.975549] Control: 10c5387d Table: 290bc04a DAC: 00000015 [ 6.981280] Process logsave (pid: 1021, stack limit = 0xea78e250) [ 6.987357] Stack: (0xea78fef8 to 0xea790000) [ 6.991702] fee0: 00000000 00000000 [ 6.999863] ff00: 00009104 00000007 ea6dc0c0 00000000 00000000 00000000 ea647c00 00000000 [ 7.008023] ff20: 00000000 00000000 00000000 00000000 00000007 00000000 00000000 00000000 [ 7.016184] ff40: ea6dc0c0 ea6dc0c0 00009104 ea78ff80 00000007 c02e2200 e9b456c0 00000020 [ 7.024345] ff60: 00000000 00000000 00000000 ea6dc0c0 ea6dc0c0 00000007 00009104 c02e27c8 [ 7.032505] ff80: 00000000 00000000 ea78e000 00000007 00009104 00000000 00000004 c020e824 [ 7.040666] ffa0: ea78e000 c020e6a0 00000007 00009104 00000003 00009104 00000007 00000066 [ 7.048826] ffc0: 00000007 00009104 00000000 00000004 bed3de14 00000003 00000039 bed3df2b [ 7.056987] ffe0: 00000003 bed3db88 00008ead b6f82b9c 40000010 00000003 2b7de821 2b7dec21 [ 7.065157] [<c02e1888>] (do_sync_write) from [<c02e2200>] (vfs_write+0xa4/0x174) [ 7.072628] [<c02e2200>] (vfs_write) from [<c02e27c8>] (SyS_write+0x40/0x94) [ 7.079671] [<c02e27c8>] (SyS_write) from [<c020e6a0>] (ret_fast_syscall+0x0/0x30) [ 7.087225] Code: bad PC value [ 7.090300] ---[ end trace e74f2f7070c180d8 ]--- Segmentation fault [?25l[?1c7[1G[[31mFAIL[39;49m8[?25h[?0c[31mfailed (code 139).[39;49m [....] File system check failed. A log is being saved in /var/log/fsck/checkfs if that location is writable. Please repair the file system manually. ...[?25l[?1c7[1G[[31mFAIL[39;49m8[?25h[?0c [31mfailed![39;49m [....] A maintenance shell will now be started. CONTROL-D will terminate this shell and resume system boot. ...[?25l[?1c7[1G[[33mwarn[39;49m8[?25h[?0c [33m(warning).[39;49m Give root password for maintenance (or type Control-D to continue): ~$off # PYBOOT: Exception: timeout Board snow-exynos_defconfig failure log: ------------------------------------------------- [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...[ 2924.691421] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 2924.698228] pgd = ed0c4000 [ 2924.700722] [00000000] *pgd=6d7e6831, *pte=00000000, *ppte=00000000 [ 2924.706975] Internal error: Oops: 80000007 [#1] PREEMPT SMP ARM [ 2924.712874] Modules linked in: [ 2924.715915] CPU: 0 PID: 2285 Comm: logsave Not tainted 3.15.0-rc2-next-20140423 #1 [ 2924.723464] task: ed0bc000 ti: ed0d4000 task.ti: ed0d4000 [ 2924.728846] PC is at 0x0 [ 2924.731367] LR is at do_sync_write+0x80/0xa8 [ 2924.735617] pc : [<00000000>] lr : [<c00b85b0>] psr: a0000013 [ 2924.735617] sp : ed0d5ef8 ip : 00000000 fp : beb60f2b [ 2924.747073] r10: 00000000 r9 : 00009104 r8 : 00000007 [ 2924.752282] r7 : ed0bc000 r6 : ed0d5f80 r5 : 00000000 r4 : 00000000 [ 2924.758791] r3 : 00000000 r2 : 00000001 r1 : ed0d5f00 r0 : ed0d5f08 [ 2924.765303] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 2924.772419] Control: 10c5387d Table: 6d0c406a DAC: 00000015 [ 2924.778148] Process logsave (pid: 2285, stack limit = 0xed0d4240) [ 2924.784224] Stack: (0xed0d5ef8 to 0xed0d6000) [ 2924.788564] 5ee0: 00000000 00000000 [ 2924.796725] 5f00: 00009104 00000007 edaf9300 00000000 00000000 00000000 ed0bc000 00000000 [ 2924.804883] 5f20: 00000000 00000000 00000000 00000000 00000007 00000000 00000000 00000000 [ 2924.813043] 5f40: edaf9300 edaf9300 00009104 ed0d5f80 00000007 c00b8f2c 00000020 00000000 [ 2924.821202] 5f60: beb60f2b 00000000 00000000 edaf9300 edaf9300 00000007 00009104 c00b94f4 [ 2924.829361] 5f80: 00000000 00000000 ed0d4000 00000007 00009104 00000000 00000004 c000e624 [ 2924.837520] 5fa0: ed0d4000 c000e4a0 00000007 00009104 00000003 00009104 00000007 00000066 [ 2924.845682] 5fc0: 00000007 00009104 00000000 00000004 beb60e14 00000003 00000039 beb60f2b [ 2924.853841] 5fe0: 00000003 beb60b88 00008ead b6f0bb9c 40000010 00000003 00000000 00000000 [ 2924.862005] [<c00b85b0>] (do_sync_write) from [<c00b8f2c>] (vfs_write+0xa4/0x174) [ 2924.869464] [<c00b8f2c>] (vfs_write) from [<c00b94f4>] (SyS_write+0x40/0x94) [ 2924.876497] [<c00b94f4>] (SyS_write) from [<c000e4a0>] (ret_fast_syscall+0x0/0x30) [ 2924.884046] Code: bad PC value [ 2924.887103] ---[ end trace cafd54927df1231e ]--- Segmentation fault [?25l[?1c7[1G[[31mFAIL[39;49m8[?25h[?0c[31mfailed (code 139).[39;49m [....] File system check failed. A log is being saved in /var/log/fsck/checkfs if that location is writable. Please repair the file system manually. ...[?25l[?1c7[1G[[31mFAIL[39;49m8[?25h[?0c [31mfailed![39;49m [....] A maintenance shell will now be started. CONTROL-D will terminate this shell and resume system boot. ...[?25l[?1c7[1G[[33mwarn[39;49m8[?25h[?0c [33m(warning).[39;49m Give root password for maintenance (or type Control-D to continue): ~$off # PYBOOT: Exception: timeout Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.165 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x01000000 tmpMfrcKG-uImage tftp 0x01000000 tmpMfrcKG-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.165 Filename 'tmpMfrcKG-uImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################# done Bytes transferred = 4697729 (47ae81 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x01000000 bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4697665 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 4.378356] r7 : ee85c000 r6 : ee84ff80 r5 : 00000000 r4 : 00000000 [ 4.384887] r3 : 00000000 r2 : 00000001 r1 : ee84ff00 r0 : ee84ff08 [ 4.391387] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 4.398529] Control: 10c5787d Table: 2e11c04a DAC: 00000015 [ 4.404266] Process init (pid: 1, stack limit = 0xee84e240) [ 4.409820] Stack: (0xee84fef8 to 0xee850000) [ 4.414184] fee0: 00000000 00000000 [ 4.422363] ff00: bec4282c 00000180 ee8b3540 00000000 00000000 00000000 ee85c000 00000000 [ 4.430511] ff20: 00000000 00000000 00000000 00000000 00000180 00000000 00000000 00000000 [ 4.438690] ff40: ee8b3540 ee8b3540 bec4282c ee84ff80 00000180 c00acccc ee8b3540 00000002 [ 4.446868] ff60: ee8b3540 00000000 00000000 ee8b3540 ee8b3540 00000180 bec4282c c00ad294 [ 4.455017] ff80: 00000000 00000000 00000002 00000000 b6f492d0 bec4282c 00000004 c000e664 [ 4.463195] ffa0: ee84e000 c000e4e0 00000000 b6f492d0 00000000 bec4282c 00000180 b6f492d0 [ 4.471374] ffc0: 00000000 b6f492d0 bec4282c 00000004 00000000 b6f4bfc0 ffffffff 00000001 [ 4.479522] ffe0: 00000004 bec42520 b6f1dbf7 b6e7ef96 60000030 00000000 efffffbf 6f9fffff [ 4.487701] [<c00ac350>] (do_sync_write) from [<c00acccc>] (vfs_write+0xa4/0x174) [ 4.495178] [<c00acccc>] (vfs_write) from [<c00ad294>] (SyS_write+0x40/0x94) [ 4.502258] [<c00ad294>] (SyS_write) from [<c000e4e0>] (ret_fast_syscall+0x0/0x30) [ 4.509796] Code: bad PC value [ 4.512908] ---[ end trace 8eb51d7ed51a501c ]--- [ 4.517730] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 4.517730] [ 4.526885] CPU0: stopping [ 4.529571] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G D 3.15.0-rc2-next-20140423 #1 [ 4.538116] [<c0014670>] (unwind_backtrace) from [<c001143c>] (show_stack+0x10/0x14) [ 4.545867] [<c001143c>] (show_stack) from [<c03c7fe4>] (dump_stack+0x9c/0xd4) [ 4.553070] [<c03c7fe4>] (dump_stack) from [<c0013514>] (handle_IPI+0x144/0x158) [ 4.560485] [<c0013514>] (handle_IPI) from [<c0008580>] (gic_handle_irq+0x58/0x5c) [ 4.568054] [<c0008580>] (gic_handle_irq) from [<c0011f80>] (__irq_svc+0x40/0x70) [ 4.575531] Exception stack(0xc0567f30 to 0xc0567f78) [ 4.580566] 7f20: c0567f78 00000004 0a32bc44 00000001 [ 4.588745] 7f40: 09d7773e 00000001 eefb9de8 c058bc04 00000001 c0563de0 eefb9dec c0566000 [ 4.596893] 7f60: 00000010 c0567f78 c0060aac c0296bb0 60000013 ffffffff [ 4.603515] [<c0011f80>] (__irq_svc) from [<c0296bb0>] (cpuidle_enter_state+0x50/0xe0) [ 4.611450] [<c0296bb0>] (cpuidle_enter_state) from [<c004ecfc>] (cpu_startup_entry+0x1fc/0x22c) [ 4.620239] [<c004ecfc>] (cpu_startup_entry) from [<c0537b98>] (start_kernel+0x358/0x364) [ 4.628387] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 4.628387] ~$off # PYBOOT: Exception: panic Board trimslice-multi_v7_defconfig failure log: ------------------------------------------------- [ 6.079505] [<c04daa3c>] (drm_fb_helper_restore_fbdev_mode) from [<c04daa9c>] (drm_fb_helper_force_kernel_mode+0x40/0x68) [ 6.090440] [<c04daa9c>] (drm_fb_helper_force_kernel_mode) from [<c04dbc48>] (drm_fb_helper_panic+0x30/0x34) [ 6.100247] [<c04dbc48>] (drm_fb_helper_panic) from [<c02643d4>] (notifier_call_chain+0x44/0x84) [ 6.109014] [<c02643d4>] (notifier_call_chain) from [<c0264450>] (atomic_notifier_call_chain+0x1c/0x24) [ 6.118386] [<c0264450>] (atomic_notifier_call_chain) from [<c07ccea8>] (panic+0xcc/0x218) [ 6.126633] [<c07ccea8>] (panic) from [<c0246cd8>] (complete_and_exit+0x0/0x1c) [ 6.133924] [<c0246cd8>] (complete_and_exit) from [<00000001>] (0x1) [ 6.140259] ---[ end trace c97c13abe5a18941 ]--- [ 6.144860] ------------[ cut here ]------------ [ 6.149466] WARNING: CPU: 0 PID: 1 at /home/build/work/batch/drivers/gpu/drm/drm_crtc_helper.c:115 drm_helper_crtc_in_use+0x78/0x7c() [ 6.161433] Modules linked in: [ 6.164482] CPU: 0 PID: 1 Comm: init Tainted: G D W 3.15.0-rc2-next-20140423 #1 [ 6.172558] [<c0215c6c>] (unwind_backtrace) from [<c0211828>] (show_stack+0x10/0x14) [ 6.180285] [<c0211828>] (show_stack) from [<c07d005c>] (dump_stack+0x88/0x98) [ 6.187493] [<c07d005c>] (dump_stack) from [<c024563c>] (warn_slowpath_common+0x6c/0x88) [ 6.195568] [<c024563c>] (warn_slowpath_common) from [<c02456f4>] (warn_slowpath_null+0x1c/0x24) [ 6.204336] [<c02456f4>] (warn_slowpath_null) from [<c04d8108>] (drm_helper_crtc_in_use+0x78/0x7c) [ 6.213277] [<c04d8108>] (drm_helper_crtc_in_use) from [<c04d81b0>] (__drm_helper_disable_unused_functions+0xa4/0xf8) [ 6.223864] [<c04d81b0>] (__drm_helper_disable_unused_functions) from [<c04d8a54>] (drm_crtc_helper_set_config+0xf0/0x9e0) [ 6.234886] [<c04d8a54>] (drm_crtc_helper_set_config) from [<c04e9b7c>] (drm_mode_set_config_internal+0x58/0xe4) [ 6.245040] [<c04e9b7c>] (drm_mode_set_config_internal) from [<c04daa3c>] (drm_fb_helper_restore_fbdev_mode+0xb0/0xd0) [ 6.255715] [<c04daa3c>] (drm_fb_helper_restore_fbdev_mode) from [<c04daa9c>] (drm_fb_helper_force_kernel_mode+0x40/0x68) [ 6.266649] [<c04daa9c>] (drm_fb_helper_force_kernel_mode) from [<c04dbc48>] (drm_fb_helper_panic+0x30/0x34) [ 6.276456] [<c04dbc48>] (drm_fb_helper_panic) from [<c02643d4>] (notifier_call_chain+0x44/0x84) [ 6.285222] [<c02643d4>] (notifier_call_chain) from [<c0264450>] (atomic_notifier_call_chain+0x1c/0x24) [ 6.294595] [<c0264450>] (atomic_notifier_call_chain) from [<c07ccea8>] (panic+0xcc/0x218) [ 6.302841] [<c07ccea8>] (panic) from [<c0246cd8>] (complete_and_exit+0x0/0x1c) [ 6.310132] [<c0246cd8>] (complete_and_exit) from [<00000001>] (0x1) [ 6.316467] ---[ end trace c97c13abe5a18942 ]--- [ 6.321072] ------------[ cut here ]------------ [ 6.325679] WARNING: CPU: 0 PID: 1 at /home/build/work/batch/drivers/gpu/drm/drm_crtc_helper.c:115 drm_helper_crtc_in_use+0x78/0x7c() [ 6.337647] Modules linked in: [ 6.340696] CPU: 0 PID: 1 Comm: init Tainted: G D W 3.15.0-rc2-next-20140423 #1 [ 6.348771] [<c0215c6c>] (unwind_backtrace) from [<c0211828>] (show_stack+0x10/0x14) [ 6.356498] [<c0211828>] (show_stack) from [<c07d005c>] (dump_stack+0x88/0x98) [ 6.363706] [<c07d005c>] (dump_stack) from [<c024563c>] (warn_slowpath_common+0x6c/0x88) [ 6.371781] [<c024563c>] (warn_slowpath_common) from [<c02456f4>] (warn_slowpath_null+0x1c/0x24) [ 6.380549] [<c02456f4>] (warn_slowpath_null) from [<c04d8108>] (drm_helper_crtc_in_use+0x78/0x7c) [ 6.389490] [<c04d8108>] (drm_helper_crtc_in_use) from [<c04d81b0>] (__drm_helper_disable~$off # PYBOOT: Exception: panic Board trimslice-tegra_defconfig failure log: ------------------------------------------------- [ 6.211271] [<c0026820>] (warn_slowpath_null) from [<c02975bc>] (drm_helper_encoder_in_use+0x6c/0x70) [ 6.220481] [<c02975bc>] (drm_helper_encoder_in_use) from [<c029769c>] (__drm_helper_disable_unused_functions+0x60/0xf8) [ 6.231339] [<c029769c>] (__drm_helper_disable_unused_functions) from [<c0297f84>] (drm_crtc_helper_set_config+0xf0/0x9e0) [ 6.242370] [<c0297f84>] (drm_crtc_helper_set_config) from [<c02a9064>] (drm_mode_set_config_internal+0x58/0xe4) [ 6.252534] [<c02a9064>] (drm_mode_set_config_internal) from [<c0299f6c>] (drm_fb_helper_restore_fbdev_mode+0xb0/0xd0) [ 6.263219] [<c0299f6c>] (drm_fb_helper_restore_fbdev_mode) from [<c0299fcc>] (drm_fb_helper_force_kernel_mode+0x40/0x68) [ 6.274162] [<c0299fcc>] (drm_fb_helper_force_kernel_mode) from [<c029b178>] (drm_fb_helper_panic+0x30/0x34) [ 6.283982] [<c029b178>] (drm_fb_helper_panic) from [<c0044d70>] (notifier_call_chain+0x44/0x84) [ 6.292759] [<c0044d70>] (notifier_call_chain) from [<c0044ff4>] (atomic_notifier_call_chain+0x34/0x48) [ 6.302143] [<c0044ff4>] (atomic_notifier_call_chain) from [<c05abb94>] (panic+0xcc/0x210) [ 6.310400] [<c05abb94>] (panic) from [<c0027e00>] (complete_and_exit+0x0/0x1c) [ 6.317699] [<c0027e00>] (complete_and_exit) from [<00000001>] (0x1) [ 6.324039] ---[ end trace cb27f8449e980582 ]--- [ 6.328644] ------------[ cut here ]------------ [ 6.333260] WARNING: CPU: 1 PID: 1 at /home/build/work/batch/drivers/gpu/drm/drm_crtc_helper.c:115 drm_helper_crtc_in_use+0x78/0x7c() [ 6.345230] Modules linked in: [ 6.348284] CPU: 1 PID: 1 Comm: init Tainted: G D W 3.15.0-rc2-next-20140423 #1 [ 6.356369] [<c0015dcc>] (unwind_backtrace) from [<c00119c4>] (show_stack+0x10/0x14) [ 6.364106] [<c00119c4>] (show_stack) from [<c05ae5b4>] (dump_stack+0xa0/0xd8) [ 6.371323] [<c05ae5b4>] (dump_stack) from [<c0026768>] (warn_slowpath_common+0x6c/0x88) [ 6.379404] [<c0026768>] (warn_slowpath_common) from [<c0026820>] (warn_slowpath_null+0x1c/0x24) [ 6.388181] [<c0026820>] (warn_slowpath_null) from [<c0297638>] (drm_helper_crtc_in_use+0x78/0x7c) [ 6.397131] [<c0297638>] (drm_helper_crtc_in_use) from [<c02976e0>] (__drm_helper_disable_unused_functions+0xa4/0xf8) [ 6.407729] [<c02976e0>] (__drm_helper_disable_unused_functions) from [<c0297f84>] (drm_crtc_helper_set_config+0xf0/0x9e0) [ 6.418760] [<c0297f84>] (drm_crtc_helper_set_config) from [<c02a9064>] (drm_mode_set_config_internal+0x58/0xe4) [ 6.428925] [<c02a9064>] (drm_mode_set_config_internal) from [<c0299f6c>] (drm_fb_helper_restore_fbdev_mode+0xb0/0xd0) [ 6.439609] [<c0299f6c>] (drm_fb_helper_restore_fbdev_mode) from [<c0299fcc>] (drm_fb_helper_force_kernel_mode+0x40/0x68) [ 6.450553] [<c0299fcc>] (drm_fb_helper_force_kernel_mode) from [<c029b178>] (drm_fb_helper_panic+0x30/0x34) [ 6.460373] [<c029b178>] (drm_fb_helper_panic) from [<c0044d70>] (notifier_call_chain+0x44/0x84) [ 6.469151] [<c0044d70>] (notifier_call_chain) from [<c0044ff4>] (atomic_notifier_call_chain+0x34/0x48) [ 6.478533] [<c0044ff4>] (atomic_notifier_call_chain) from [<c05abb94>] (panic+0xcc/0x210) [ 6.486790] [<c05abb94>] (panic) from [<c0027e00>] (complete_and_exit+0x0/0x1c) [ 6.494090] [<c0027e00>] (complete_and_exit) from [<00000001>] (0x1) [ 6.500429] ---[ end trace cb27f8449e980583 ]--- [ 6.505041] ------------[ cut here ]------------ [ 6.509657] WARNING: CPU: 1 PID: 1 at /home/build/work/batch/drivers/gpu/drm/drm_crtc_helper.c:115 drm_helper_crtc_in_use+0x78/0x7c() [ 6.521628] Modules linked in: [ 6.524683] CPU: 1 PID: 1 Comm: init Tainted: G D W 3.15.0-rc2-next-20140423 #1 [ 6.532769] [<c0015dcc>] (unwind_back~$off # PYBOOT: Exception: panic Board wandboard-imx_v6_v7_defconfig failure log: ------------------------------------------------- Internal error: Oops: 80000007 [#2] SMP ARM Modules linked in: CPU: 1 PID: 1056 Comm: logsave Tainted: G D 3.15.0-rc2-next-20140423 #1 task: ec70b0c0 ti: ecb0e000 task.ti: ecb0e000 PC is at 0x0 LR is at do_sync_write+0x84/0xac pc : [<00000000>] lr : [<800e4f28>] psr: a0000013 sp : ecb0fee0 ip : 00000000 fp : ecb0ff44 r10: 00000000 r9 : 00009104 r8 : 00000007 r7 : 00000007 r6 : ecb0ff78 r5 : 00000000 r4 : 00000000 r3 : 00000000 r2 : 00000001 r1 : ecb0fee8 r0 : ecb0fef0 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: 7c73c04a DAC: 00000015 Process logsave (pid: 1056, stack limit = 0xecb0e240) Stack: (0xecb0fee0 to 0xecb10000) fee0: 00000000 00000000 00009104 00000007 ec617540 00000000 00000000 00000000 ff00: ec70b0c0 00000000 00000000 00000000 00000000 00000000 00000007 00000000 ff20: 00000000 00000000 00000007 ec617540 00009104 ecb0ff78 ecb0ff74 ecb0ff48 ff40: 800e5980 800e4eb0 00000066 00000007 00000000 00000000 ec617540 ec617540 ff60: 00000007 00009104 ecb0ffa4 ecb0ff78 800e5f64 800e58e0 00000000 00000000 ff80: 00000007 00009104 00000000 00000004 8000eb84 ecb0e000 00000000 ecb0ffa8 ffa0: 8000e9c0 800e5f2c 00000007 00009104 00000003 00009104 00000007 00000066 ffc0: 00000007 00009104 00000000 00000004 7e96de14 00000003 00000039 7e96df2b ffe0: 00000003 7e96db88 00008ead 76ee0b9c 40000010 00000003 00000000 00000000 Backtrace: [<800e4ea4>] (do_sync_write) from [<800e5980>] (vfs_write+0xac/0x17c) r6:ecb0ff78 r5:00009104 r4:ec617540 [<800e58d4>] (vfs_write) from [<800e5f64>] (SyS_write+0x44/0x98) r9:00009104 r8:00000007 r7:ec617540 r6:ec617540 r5:00000000 r4:00000000 [<800e5f20>] (SyS_write) from [<8000e9c0>] (ret_fast_syscall+0x0/0x48) r9:ecb0e000 r8:8000eb84 r7:00000004 r6:00000000 r5:00009104 r4:00000007 Code: bad PC value ---[ end trace b95c1ee51706d0d1 ]--- Segmentation fault [?25l[?1c7[1G[[31mFAIL[39;49m8[?25h[?0c[31mfailed (code 139).[39;49m [....] File system check failed. A log is being saved in /var/log/fsck/checkfs if that location is writable. Please repair the file system manually. ...[?25l[?1c7[1G[[31mFAIL[39;49m8[?25h[?0c [31mfailed![39;49m [....] A maintenance shell will now be started. CONTROL-D will terminate this shell and resume system boot. ...[?25l[?1c7[1G[[33mwarn[39;49m8[?25h[?0c [33m(warning).[39;49m Give root password for maintenance (or type Control-D to continue): ~$off # PYBOOT: Exception: timeout Board wandboard-multi_v7_defconfig failure log: ------------------------------------------------- [....] Checking file systems...[ 4.872749] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 4.880918] pgd = e89ac000 [ 4.883630] [00000000] *pgd=8f82d831 [ 4.887230] Internal error: Oops: 80000007 [#1] SMP ARM [ 4.892458] Modules linked in: [ 4.895535] CPU: 3 PID: 1056 Comm: logsave Not tainted 3.15.0-rc2-next-20140423 #1 [ 4.903110] task: e88bcb40 ti: e89b0000 task.ti: e89b0000 [ 4.908513] PC is at 0x0 [ 4.911058] LR is at do_sync_write+0x80/0xa8 [ 4.915333] pc : [<00000000>] lr : [<c02e1888>] psr: a0000013 [ 4.915333] sp : e89b1ef8 ip : 00000000 fp : beb4cf2b [ 4.926812] r10: 00000000 r9 : 00009104 r8 : 00000007 [ 4.932039] r7 : e88bcb40 r6 : e89b1f80 r5 : 00000000 r4 : 00000000 [ 4.938567] r3 : 00000000 r2 : 00000001 r1 : e89b1f00 r0 : e89b1f08 [ 4.945099] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 4.952237] Control: 10c5387d Table: 389ac04a DAC: 00000015 [ 4.957986] Process logsave (pid: 1056, stack limit = 0xe89b0250) [ 4.964083] Stack: (0xe89b1ef8 to 0xe89b2000) [ 4.968444] 1ee0: 00000000 00000000 [ 4.976627] 1f00: 00009104 00000007 e9ea6480 00000000 00000000 00000000 e88bcb40 00000000 [ 4.984808] 1f20: 00000000 00000000 00000000 00000000 00000007 00000000 00000000 00000000 [ 4.992991] 1f40: e9ea6480 e9ea6480 00009104 e89b1f80 00000007 c02e2200 e9173460 00000020 [ 5.001174] 1f60: 00000000 00000000 00000000 e9ea6480 e9ea6480 00000007 00009104 c02e27c8 [ 5.009357] 1f80: 00000000 00000000 e89b0000 00000007 00009104 00000000 00000004 c020e824 [ 5.017539] 1fa0: e89b0000 c020e6a0 00000007 00009104 00000003 00009104 00000007 00000066 [ 5.025722] 1fc0: 00000007 00009104 00000000 00000004 beb4ce14 00000003 00000039 beb4cf2b [ 5.033904] 1fe0: 00000003 beb4cb88 00008ead b6f1ab9c 40000010 00000003 ffffffff ffffffff [ 5.042097] [<c02e1888>] (do_sync_write) from [<c02e2200>] (vfs_write+0xa4/0x174) [ 5.049590] [<c02e2200>] (vfs_write) from [<c02e27c8>] (SyS_write+0x40/0x94) [ 5.056654] [<c02e27c8>] (SyS_write) from [<c020e6a0>] (ret_fast_syscall+0x0/0x30) [ 5.064230] Code: bad PC value [ 5.067323] ---[ end trace 12fc40045c298357 ]--- Segmentation fault [?25l[?1c7[1G[[31mFAIL[39;49m8[?25h[?0c[31mfailed (code 139).[39;49m [....] File system check failed. A log is being saved in /var/log/fsck/checkfs if that location is writable. Please repair the file system manually. ...[?25l[?1c7[1G[[31mFAIL[39;49m8[?25h[?0c [31mfailed![39;49m [....] A maintenance shell will now be started. CONTROL-D will terminate this shell and resume system boot. ...[?25l[?1c7[1G[[33mwarn[39;49m8[?25h[?0c [33m(warning).[39;49m [ 5.288195] random: nonblocking pool is initialized Give root password for maintenance (or type Control-D to continue): ~$off # PYBOOT: Exception: timeout

10 years, 8 months

next build: 129031 warnings 0 failures (next/next-20140423)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next, found at: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch) Topmost commit: c5169f6 Add linux-next specific files for 20140423 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next/next-20140423/ Runtime: 41m 48s Passed: 124 Failed: 0 Warnings: 129031 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 buildall.arm.acs5k_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.acs5k_tiny_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.am200epdkit_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.ape6evm_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.armadillo800eva_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.assabet_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.at91_dt_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.at91rm9200_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.at91sam9260_9g20_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.at91sam9261_9g10_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.at91sam9263_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.at91sam9g45_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.at91sam9rl_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.at91x40_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.badge4_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.bcm2835_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.bcm_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.bockw_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.cerfcube_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.clps711x_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.cm_x2xx_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.cm_x300_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.cns3420vb_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.colibri_pxa270_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.colibri_pxa300_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.collie_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.corgi_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.davinci_all_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.dove_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.ebsa110_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.efm32_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.em_x270_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.ep93xx_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.eseries_pxa_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.exynos_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.ezx_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.footbridge_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.genmai_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.h3600_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.h5000_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.hackkit_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.hi3xxx_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.imote2_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.imx_v4_v5_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.imx_v6_v7_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.integrator_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.iop13xx_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.iop32x_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.iop33x_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.ixp4xx_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.jornada720_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.keystone_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.kirkwood_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.koelsch_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.ks8695_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.kzm9g_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.lager_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.lart_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.lpc32xx_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.lpd270_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.lubbock_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.mackerel_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.magician_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.mainstone_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.marzen_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.mini2440_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.mmp2_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.moxart_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.msm_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.multi_lpae_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.multi_v5_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.multi_v7_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.mv78xx0_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.mvebu_v5_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.mvebu_v7_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.mxs_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.neponset_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.netwinder_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.netx_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.nhk8815_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.nuc910_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.nuc950_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.nuc960_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.omap1_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.omap2plus_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.orion5x_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.palmz72_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.pcm027_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.pleb_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.prima2_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.pxa168_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.pxa255-idp_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.pxa3xx_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.pxa910_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.raumfeld_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.realview_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.realview-smp_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.rpc_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.s3c2410_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.s3c6400_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.s5p64x0_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.s5pc100_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.s5pv210_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.sama5_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.shannon_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.shmobile_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.simpad_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.socfpga_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.spear13xx_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.spear3xx_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.spear6xx_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.spitz_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.sunxi_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.tct_hammer_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.tegra_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.trizeps4_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.u300_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.u8500_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.versatile_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.vexpress_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.viper_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.vt8500_v6_v7_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.xcep_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.zeus_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 drivers/irqchip/irq-clps711x.c:78:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 1 drivers/pci/host/pci-mvebu.c:334:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 111 fs/direct-io.c:1011:12: warning: 'from' may be used uninitialized in this function [-Wmaybe-uninitialized] 111 fs/direct-io.c:1011:12: warning: 'to' may be used uninitialized in this function [-Wmaybe-uninitialized] 128678 arch/arm/include/asm/memory.h:297:0: warning: "virt_to_pfn" redefined [enabled by default] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1ba0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

10 years, 8 months

next boot: 47 pass, 4 fail (next-20140422)

by Kevin's boot bot

Tree/Branch: next Git describe: next-20140422 Failed boot tests (console logs at the end) =========================================== legacy,3730xm: FAIL: omap2plus_defconfig omap5-uevm: FAIL: omap2plus_defconfig legacy,3530overo: FAIL: omap2plus_defconfig exynos5420-arndale-octa: FAIL: exynos_defconfig Full Report =========== omap2plus_defconfig ------------------- legacy,3730xm 2 min 52.2 sec: FAIL am335x-boneblack 0 min 44.3 sec: PASS omap3-beagle-xm 0 min 58.1 sec: PASS legacy,3530beagle 0 min 35.0 sec: PASS (Warnings: 1) omap4-panda 1 min 18.4 sec: PASS omap3-overo-tobi 0 min 23.2 sec: PASS (Warnings: 1) am335x-bone 0 min 27.6 sec: PASS omap3-overo-storm-tobi 0 min 24.8 sec: PASS omap5-uevm 1 min 11.2 sec: FAIL omap3-n900 0 min 43.5 sec: PASS (Warnings: 1) legacy,n900 0 min 43.4 sec: PASS (Warnings: 1) omap4-panda-es 1 min 21.8 sec: PASS legacy,3730storm 0 min 23.1 sec: PASS legacy,3530overo 0 min 20.3 sec: FAIL (Warnings: 1) multi_lpae_defconfig -------------------- omap5-uevm 1 min 34.9 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 12.4 sec: PASS tegra_defconfig --------------- tegra30-beaver 0 min 17.5 sec: PASS imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 18.7 sec: PASS imx6dl-wandboard,wand-solo 0 min 18.9 sec: PASS imx6q-wandboard 0 min 17.3 sec: PASS sunxi_defconfig --------------- sun7i-a20-cubieboard2 0 min 22.4 sec: PASS sun4i-a10-cubieboard 0 min 17.7 sec: PASS bcm_defconfig ------------- bcm28155-ap 0 min 23.2 sec: PASS mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 0 min 22.2 sec: PASS armada-370-mirabox 0 min 20.3 sec: PASS exynos_defconfig ---------------- exynos5420-arndale-octa 0 min 38.2 sec: FAIL exynos5250-arndale 0 min 30.3 sec: PASS multi_v7_defconfig ------------------ qcom-apq8074-dragonboard 0 min 16.4 sec: PASS ste-snowball 1 min 20.7 sec: PASS tegra30-beaver 0 min 17.1 sec: PASS am335x-boneblack 0 min 38.3 sec: PASS omap3-beagle-xm 0 min 46.1 sec: PASS sun7i-a20-cubieboard2 0 min 12.4 sec: PASS armada-370-mirabox 0 min 19.6 sec: PASS omap4-panda 0 min 55.0 sec: PASS armada-xp-openblocks-ax3-4 0 min 26.7 sec: PASS sun4i-a10-cubieboard 0 min 17.4 sec: PASS bcm28155-ap 0 min 27.7 sec: PASS omap3-overo-tobi 0 min 22.5 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.3 sec: PASS am335x-bone 0 min 26.7 sec: PASS omap3-overo-storm-tobi 0 min 23.9 sec: PASS omap5-uevm 1 min 36.9 sec: PASS (Warnings: 1) omap3-n900 0 min 39.8 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 17.2 sec: PASS omap4-panda-es 0 min 50.6 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.3 sec: PASS u8500_defconfig --------------- ste-snowball 0 min 31.0 sec: PASS sama5_defconfig --------------- sama5d35ek 0 min 17.3 sec: PASS davinci_all_defconfig --------------------- legacy,dm365evm 0 min 17.5 sec: PASS da850-evm 0 min 15.7 sec: PASS Console logs for failures ========================= omap2plus_defconfig ------------------- legacy,3730xm: FAIL: last 80 lines of boot log: ----------------------------------------------- [ 0.854461] Key type id_resolver registered [ 0.854492] Key type id_legacy registered [ 0.854675] jffs2: version 2.2. (NAND) (SUMMARY) B) 2001-2006 Red Hat, Inc. [ 0.855590] msgmni has been set to 979 [ 0.862762] io scheduler noop registered [ 0.862823] io scheduler deadline registered [ 0.862915] io scheduler cfq registered (default) [ 0.867523] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.876220] omap_uart omap_uart.0: no wakeirq for uart0 [ 0.878021] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 0.880218] omap_uart omap_uart.1: no wakeirq for uart0 [ 0.881378] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1 [ 0.882873] omap_uart omap_uart.2: no wakeirq for uart0 [ 0.883728] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a OMAP UART2 [ 1.619354] console [ttyO2] enabled [ 1.625732] omap_uart omap_uart.3: no wakeirq for uart0 [ 1.632293] omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 96, base_baud = 3000000) is a OMAP UART3 [ 1.682739] brd: module loaded [ 1.708679] loop: module loaded [ 1.731109] twl 1-0048: PIH (irq 23) chaining IRQs 338..346 [ 1.737609] twl 1-0048: power (irq 343) chaining IRQs 346..353 [ 1.749114] twl4030_gpio twl4030_gpio: gpio (irq 338) chaining IRQs 354..371 [ 1.763580] platform usb_phy_gen_xceiv.2: Driver usb_phy_gen_xceiv requests probe deferral [ 1.778625] hsusb2_vcc: at 3300 mV [ 1.786254] vdd_mpu_iva: 600 <--> 1450 mV normal [ 1.793823] vdd_core: 600 <--> 1450 mV normal [ 1.801544] VMMC1: 1850 <--> 3150 mV at 3150 mV normal standby [ 1.811859] VDAC: 1800 mV normal standby [ 1.818817] VDVI: 1800 mV normal standby [ 1.826904] VSIM: 1800 <--> 3000 mV at 1800 mV normal standby [ 1.841491] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.860382] usbcore: registered new interface driver asix [ 1.866363] usbcore: registered new interface driver ax88179_178a [ 1.872894] usbcore: registered new interface driver cdc_ether [ 1.879302] usbcore: registered new interface driver smsc95xx [ 1.885528] usbcore: registered new interface driver net1080 [ 1.891601] usbcore: registered new interface driver cdc_subset [ 1.898010] usbcore: registered new interface driver zaurus [ 1.904174] usbcore: registered new interface driver cdc_ncm [ 1.911651] usbcore: registered new interface driver cdc_wdm [ 1.917907] usbcore: registered new interface driver usb-storage [ 1.924468] usbcore: registered new interface driver usbtest [ 1.939544] mousedev: PS/2 mouse device common for all mice [ 1.952545] input: twl4030_pwrbutton as /devices/platform/omap_i2c.1/i2c-1/1-004b/twl4030_pwrbutton/input/input0 [ 1.971130] twl_rtc twl_rtc: Power up reset detected. [ 1.978454] twl_rtc twl_rtc: Enabling TWL-RTC [ 1.991790] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0 [ 2.001312] i2c /dev entries driver [ 2.008056] Driver for 1-wire Dallas network protocol. [ 2.020385] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec [ 2.408294] ledtrig-cpu: registered to indicate activity on CPUs [ 2.415466] usbcore: registered new interface driver usbhid [ 2.421295] usbhid: USB HID core driver [ 2.426788] oprofile: using arm/armv7 [ 2.431427] TCP: cubic registered [ 2.434936] Initializing XFRM netlink socket [ 2.439636] NET: Registered protocol family 17 [ 2.444396] NET: Registered protocol family 15 [ 2.449554] Key type dns_resolver registered [ 2.469543] ThumbEE CPU extension supported. [ 2.474121] Registering SWP/SWPB emulation handler [ 2.493530] VDVI: incomplete constraints, leaving on [ 2.500579] VDAC: incomplete constraints, leaving on [ 2.505981] hsusb2_vcc: incomplete constraints, leaving on [ 2.518554] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 2.529388] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.615051] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.626770] mmc0: new high speed SDHC card at address 1234 [ 2.636322] mmcblk0: mmc0:1234 SA04G 3.63 GiB [ 2.649536] mmcblk0: p1 p2 [ 14.756835] EXT4-fs (mmcblk0p2): recovery complete [ 14.762451] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 14.771179] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 14.782043] devtmpfs: mounted [ 14.786254] Freeing unused kernel memory: 388K (c07a3000 - c0804000) [ 113.016174] random: nonblocking pool is initialized ~$off # PYBOOT: Exception: userspace: ERROR: Never found root shell # PYBOOT: Time: 172.19 seconds. # PYBOOT: Result: FAIL omap5-uevm: FAIL: last 80 lines of boot log: -------------------------------------------- U-Boot# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... found: 002/033 2 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found U-Boot# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot# dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.200 U-Boot# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U-Boot# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U-Boot# tftp 0x82000000 192.168.1.2:tmp/omap5uevm-HPfgCa/zImage tftp 0x82000000 192.168.1.2:tmp/omap5uevm-HPfgCa/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.200 Filename 'tmp/omap5uevm-HPfgCa/zImage'. Load address: 0x82000000 Loading: *T ################################################################# ################################################################# ################################################################# ################################################################# ################################### 608.4 KiB/s done Bytes transferred = 4317152 (41dfe0 hex) U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.200 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *T ############################################ 111.3 KiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot# tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-HPfgCa/omap5-uevm.dtb tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-HPfgCa/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.200 Filename 'tmp/omap5uevm-HPfgCa/omap5-uevm.dtb'. Load address: 0x80f80000 Loading: *T #### 7.8 KiB/s done Bytes transferred = 44972 (afac hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk ip=192.168.1.200:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 U-Boot# bootz 0x82000000 0x81000000 0x80f80000 bootz 0x82000000 0x81000000 0x80f80000 Kernel image @ 0x82000000 [ 0x000000 - 0x41dfe0 ] ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 80f80000 Booting using the fdt blob at 0x80f80000 Using Device Tree in place at 80f80000, end 80f8dfab Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 71.17 seconds. # PYBOOT: Result: FAIL legacy,3530overo: FAIL: last 80 lines of boot log: -------------------------------------------------- [ 2.112182] twl 1-0048: PIH (irq 23) chaining IRQs 338..346 [ 2.118713] twl 1-0048: power (irq 343) chaining IRQs 346..353 [ 2.130645] twl4030_gpio twl4030_gpio: gpio (irq 338) chaining IRQs 354..371 [ 2.139221] gpiochip_find_base: found new base at 492 [ 2.145629] gpiochip_add: registered GPIOs 492 to 511 on device: twl4030 [ 2.156646] vdd_mpu_iva: 600 <--> 1450 mV normal [ 2.165466] vdd_core: 600 <--> 1450 mV normal [ 2.173828] VMMC1: 1850 <--> 3150 mV at 3150 mV normal standby [ 2.184387] VDAC: 1800 mV normal standby [ 2.191406] VDVI: 1800 mV normal standby [ 2.203826] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.382659] libphy: smsc911x-mdio: probed [ 2.460845] smsc911x smsc911x.0 eth0: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=smsc911x-0:01, irq=-1) [ 2.472137] smsc911x smsc911x.0 eth0: MAC Address: 2e:9e:5e:9e:2a:4a [ 2.482421] usbcore: registered new interface driver asix [ 2.488311] usbcore: registered new interface driver ax88179_178a [ 2.495086] usbcore: registered new interface driver cdc_ether [ 2.501556] usbcore: registered new interface driver smsc95xx [ 2.507812] usbcore: registered new interface driver net1080 [ 2.514007] usbcore: registered new interface driver cdc_subset [ 2.520507] usbcore: registered new interface driver zaurus [ 2.526702] usbcore: registered new interface driver cdc_ncm [ 2.534667] usbcore: registered new interface driver cdc_wdm [ 2.541076] usbcore: registered new interface driver usb-storage [ 2.547668] usbcore: registered new interface driver usbtest [ 2.556915] mousedev: PS/2 mouse device common for all mice [ 2.567871] ads7846 spi1.0: touchscreen, irq 228 [ 2.575683] input: ADS7846 Touchscreen as /devices/platform/omap2_mcspi.1/spi_master/spi1/spi1.0/input/input0 [ 2.592895] input: twl4030_pwrbutton as /devices/platform/omap_i2c.1/i2c-1/1-004b/twl4030_pwrbutton/input/input1 [ 2.608551] twl_rtc twl_rtc: Power up reset detected. [ 2.614776] twl_rtc twl_rtc: Enabling TWL-RTC [ 2.629364] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0 [ 2.639221] i2c /dev entries driver [ 2.647216] Driver for 1-wire Dallas network protocol. [ 2.658416] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec [ 3.041229] omap_hsmmc omap_hsmmc.1: unable to get vmmc regulator -517 [ 3.048675] platform omap_hsmmc.1: Driver omap_hsmmc requests probe deferral [ 3.067108] ledtrig-cpu: registered to indicate activity on CPUs [ 3.074462] usbcore: registered new interface driver usbhid [ 3.080383] usbhid: USB HID core driver [ 3.086090] oprofile: using arm/armv7 [ 3.091033] TCP: cubic registered [ 3.094543] Initializing XFRM netlink socket [ 3.099182] NET: Registered protocol family 17 [ 3.104064] NET: Registered protocol family 15 [ 3.109252] Key type dns_resolver registered [ 3.141632] ThumbEE CPU extension supported. [ 3.146179] Registering SWP/SWPB emulation handler [ 3.161346] VDVI: incomplete constraints, leaving on [ 3.167236] VDAC: incomplete constraints, leaving on [ 3.175292] omap_hsmmc omap_hsmmc.1: unable to get vmmc regulator -517 [ 3.182708] platform omap_hsmmc.1: Driver omap_hsmmc requests probe deferral [ 3.195281] input: gpio-keys as /devices/platform/gpio-keys/input/input2 [ 3.207672] omap_hsmmc omap_hsmmc.1: unable to get vmmc regulator -517 [ 3.214965] platform omap_hsmmc.1: Driver omap_hsmmc requests probe deferral [ 3.225280] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:14 UTC (946684814) [ 3.410247] smsc911x smsc911x.0 eth0: SMSC911x/921x identified at 0xe087c000, IRQ: 290 [ 3.431213] IP-Config: Complete: [ 3.434600] device=eth0, hwaddr=2e:9e:5e:9e:2a:4a, ipaddr=192.168.1.155, mask=255.255.255.0, gw=192.168.1.254 [ 3.445587] host=192.168.1.155, domain=, nis-domain=(none) [ 3.451843] bootserver=192.168.1.2, rootserver=192.168.1.2, rootpath= [ 3.458862] nameserver0=192.168.1.254 [ 3.468688] Waiting for root device /dev/mmcblk0p2... [ 3.490997] mmc0: host does not support reading read-only switch. assuming write-enable. [ 3.506500] mmc0: new high speed SDHC card at address aaaa [ 3.516693] mmcblk0: mmc0:aaaa SU04G 3.69 GiB [ 3.537384] mmcblk0: p1 p2 [ 3.547332] omap_hsmmc omap_hsmmc.1: unable to get vmmc regulator -517 [ 3.554656] platform omap_hsmmc.1: Driver omap_hsmmc requests probe deferral [ 3.623046] EXT4-fs (mmcblk0p2): recovery complete [ 3.628875] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 3.637664] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 3.649719] devtmpfs: error mounting -2 [ 3.655181] Freeing unused kernel memory: 388K (c07a3000 - c0804000) [ 3.662841] Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. ~$off # PYBOOT: Exception: userspace: failed to find root shell: Kernel panic # PYBOOT: Time: 20.29 seconds. # PYBOOT: Warnings: 1 # PYBOOT: Result: FAIL exynos_defconfig ---------------- exynos5420-arndale-octa: FAIL: last 80 lines of boot log: --------------------------------------------------------- Connected to octa console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(octa console)> hardreset (user:khilman) Reboot octa 0 Reboot: octa ; phidget 3 6 : off, sleep, on U-Boot 2012.07-00001-g02b1decad082 (Feb 24 2014 - 14:16:18) for ARNDALE OCTA CPU: Exynos5420 Rev2.0 [Samsung SOC on SMP Platform Base on ARM CortexA15] APLL = 800MHz, KPLL = 600MHz MPLL = 532MHz, BPLL = 800MHz Board: ARNDALE OCTA DRAM: 2 GiB WARNING: Caches not enabled TrustZone Enabled BSP BL1 version: Checking Boot Mode ... SDMMC MMC: S5P_MSHC2: 0, S5P_MSHC0: 1 MMC Device 0: 7.4 GiB MMC Device 1: 3.6 GiB MMC Device 2: MMC Device 2 not found there are pending interrupts 0x00000001 In: serial Out: serial Err: serial Net: No ethernet found. (Re)start USB... USB: Register 1313 NbrPorts 3 USB EHCI 1.00 scanning bus for devices... The request port(2) is not configured The request port(2) is not configured 3 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Hit any key to stop autoboot: 1 0 ** Unable to use mmc 0:2 for fatload ** ** Unable to use mmc 0:2 for fatload ** ARNDALE # ~$off # PYBOOT: Exception: Timeout exceeded in read_nonblocking(). <pexpect.spawn object at 0x1bd8f90> version: 2.3 ($Revision: 399 $) command: /usr/bin/conmux-console args: ['/usr/bin/conmux-console', 'vence/octa'] searcher: searcher_re: 0: re.compile("ARNDALE #") buffer (last 100 chars): before (last 100 chars): after: <class 'pexpect.TIMEOUT'> match: None match_index: None exitstatus: None flag_eof: False pid: 30870 child_fd: 4 closed: False timeout: 30 delimiter: <class 'pexpect.EOF'> logfile: <open file 'boot-exynos5420-arndale-octa.log', mode 'w' at 0x7fc9d8cf9b70> logfile_read: None logfile_send: None maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 0.1 delayafterterminate: 0.1 # PYBOOT: Time: 38.22 seconds. # PYBOOT: Result: FAIL

10 years, 8 months

mainline boot: 47 pass, 3 fail (v3.15-rc2-42-g4d0fa8a)

by Kevin's boot bot

Tree/Branch: mainline Git describe: v3.15-rc2-42-g4d0fa8a Failed boot tests (console logs at the end) =========================================== legacy,3730xm: FAIL: omap2plus_defconfig omap3-beagle-xm: FAIL: omap2plus_defconfig omap4-panda-es: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- legacy,3730xm 1 min 3.7 sec: FAIL am335x-boneblack 0 min 43.8 sec: PASS omap3-beagle-xm 1 min 16.7 sec: FAIL legacy,3530beagle 0 min 36.0 sec: PASS (Warnings: 1) omap4-panda 1 min 6.8 sec: PASS omap3-overo-tobi 0 min 23.6 sec: PASS (Warnings: 1) am335x-bone 0 min 32.7 sec: PASS omap3-overo-storm-tobi 0 min 21.6 sec: PASS omap5-uevm 1 min 7.5 sec: PASS (Warnings: 1) omap3-n900 0 min 49.5 sec: PASS (Warnings: 1) legacy,n900 0 min 42.6 sec: PASS (Warnings: 1) omap4-panda-es 1 min 16.5 sec: PASS legacy,3730storm 0 min 22.6 sec: PASS legacy,3530overo 0 min 21.0 sec: PASS (Warnings: 1) multi_lpae_defconfig -------------------- omap5-uevm 1 min 37.2 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 12.5 sec: PASS tegra_defconfig --------------- tegra30-beaver 0 min 17.3 sec: PASS imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 18.6 sec: PASS imx6dl-wandboard,wand-solo 0 min 19.2 sec: PASS imx6q-wandboard 0 min 17.2 sec: PASS sunxi_defconfig --------------- sun7i-a20-cubieboard2 0 min 22.7 sec: PASS sun4i-a10-cubieboard 0 min 12.8 sec: PASS bcm_defconfig ------------- bcm28155-ap 0 min 22.9 sec: PASS mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 0 min 22.1 sec: PASS armada-370-mirabox 0 min 20.2 sec: PASS exynos_defconfig ---------------- exynos5250-arndale 0 min 30.7 sec: PASS multi_v7_defconfig ------------------ qcom-apq8074-dragonboard 0 min 17.0 sec: PASS ste-snowball 1 min 20.4 sec: PASS tegra30-beaver 0 min 17.1 sec: PASS am335x-boneblack 0 min 37.5 sec: PASS omap3-beagle-xm 0 min 58.6 sec: PASS sun7i-a20-cubieboard2 0 min 12.2 sec: PASS armada-370-mirabox 0 min 22.3 sec: PASS omap4-panda 0 min 53.6 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.2 sec: PASS sun4i-a10-cubieboard 0 min 19.4 sec: PASS bcm28155-ap 0 min 27.6 sec: PASS omap3-overo-tobi 0 min 22.1 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.3 sec: PASS am335x-bone 0 min 26.9 sec: PASS omap3-overo-storm-tobi 0 min 23.8 sec: PASS omap5-uevm 1 min 41.8 sec: PASS (Warnings: 1) omap3-n900 0 min 35.9 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 16.8 sec: PASS omap4-panda-es 2 min 23.1 sec: FAIL imx6dl-wandboard,wand-dual 0 min 18.4 sec: PASS u8500_defconfig --------------- ste-snowball 0 min 31.9 sec: PASS sama5_defconfig --------------- sama5d35ek 0 min 17.0 sec: PASS davinci_all_defconfig --------------------- legacy,dm365evm 0 min 17.4 sec: PASS da850-evm 0 min 15.8 sec: PASS Console logs for failures ========================= omap2plus_defconfig ------------------- legacy,3730xm: FAIL: last 80 lines of boot log: ----------------------------------------------- version U-Boot 2013.04 (Jan 17 2014 - 10:48:29) arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.3-1ubuntu1) 4.7.3 GNU ld (GNU Binutils for Ubuntu) 2.23.2 OMAP3 beagleboard.org #setenv usbethaddr 2a:45:34:6d:b4:5d setenv usbethaddr 2a:45:34:6d:b4:5d OMAP3 beagleboard.org # setenv preboot "dcache off; usb start" # For USB net setenv preboot "dcache off; usb start" # For USB net OMAP3 beagleboard.org # setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 OMAP3 beagleboard.org # setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' OMAP3 beagleboard.org # if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi OMAP3 beagleboard.org # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found OMAP3 beagleboard.org #setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no OMAP3 beagleboard.org # dhcp dhcp ERROR: Need valid 'usbnet_devaddr' to be set at ether.c:2369/usb_eth_init() Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.190 OMAP3 beagleboard.org #setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 OMAP3 beagleboard.org #if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi OMAP3 beagleboard.org #tftp 0x80200000 192.168.1.2:tmp/3730xm-LA5Wgc/zImage tftp 0x80200000 192.168.1.2:tmp/3730xm-LA5Wgc/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'tmp/3730xm-LA5Wgc/zImage'. Load address: 0x80200000 Loading: *T ################################################################# ################################################################# ################################################################# ################################################################# ################################# 434.6 KiB/s done Bytes transferred = 4299416 (419a98 hex) OMAP3 beagleboard.org # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *T ############################################ 103.5 KiB/s done Bytes transferred = 642602 (9ce2a hex) OMAP3 beagleboard.org # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.190:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 OMAP3 beagleboard.org #bootz 0x80200000 0x81000000 bootz 0x80200000 0x81000000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 63.69 seconds. # PYBOOT: Result: FAIL omap3-beagle-xm: FAIL: last 80 lines of boot log: ------------------------------------------------- scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found OMAP3 beagleboard.org # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no OMAP3 beagleboard.org # dhcp dhcp ERROR: Need valid 'usbnet_devaddr' to be set at ether.c:2369/usb_eth_init() Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x8008d80 BOOTP broadcast 2 DHCP client bound to address 192.168.1.190 OMAP3 beagleboard.org #setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 OMAP3 beagleboard.org # if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi OMAP3 beagleboard.org # tftp 0x80200000 192.168.1.2:tmp/3730xm-IvjfBZ/zImage tftp 0x80200000 192.168.1.2:tmp/3730xm-IvjfBZ/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'tmp/3730xm-IvjfBZ/zImage'. Load address: 0x80200000 Loading: *EHCI timed out on TD - token=0x8008d80 T ################################################################# ################################################################# ################################################################# ################################################################# ################################# 409.2 KiB/s done Bytes transferred = 4299416 (419a98 hex) OMAP3 beagleboard.org # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x88008d80 T ############################################ 109.4 KiB/s done Bytes transferred = 642602 (9ce2a hex) OMAP3 beagleboard.org # tftp 0x81f00000 192.168.1.2:tmp/3730xm-IvjfBZ/omap3-beagle-xm.dtb tftp 0x81f00000 192.168.1.2:tmp/3730xm-IvjfBZ/omap3-beagle-xm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'tmp/3730xm-IvjfBZ/omap3-beagle-xm.dtb'. Load address: 0x81f00000 Loading: *EHCI timed out on TD - token=0x8008d80 T ##### 5.9 KiB/s done Bytes transferred = 60981 (ee35 hex) OMAP3 beagleboard.org # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.190:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 OMAP3 beagleboard.org # bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8ff63000, end 8ffffdea ... OK Loading Device Tree to 8ff51000, end 8ff62e34 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 76.67 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ omap4-panda-es: FAIL: last 80 lines of boot log: ------------------------------------------------ [ 1.431457] 4806e000.serial: ttyO3 at MMIO 0x4806e000 (irq = 102, base_baud = 3000000) is a OMAP UART3 [ 1.441711] STMicroelectronics ASC driver initialized [ 1.447875] serial: Freescale lpuart driver [ 1.452484] [drm] Initialized drm 1.1.0 20060810 [ 1.462677] loop: module loaded [ 1.472076] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.479919] usbcore: registered new interface driver pegasus [ 1.485931] usbcore: registered new interface driver asix [ 1.491668] usbcore: registered new interface driver ax88179_178a [ 1.498107] usbcore: registered new interface driver cdc_ether [ 1.504302] usbcore: registered new interface driver smsc75xx [ 1.510406] usbcore: registered new interface driver smsc95xx [ 1.516479] usbcore: registered new interface driver net1080 [ 1.522460] usbcore: registered new interface driver cdc_subset [ 1.528717] usbcore: registered new interface driver zaurus [ 1.534667] usbcore: registered new interface driver cdc_ncm [ 1.540649] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.547485] ehci-pci: EHCI PCI platform driver [ 1.552215] ehci-platform: EHCI generic platform driver [ 1.557922] ehci-omap: OMAP-EHCI Host Controller driver [ 1.583679] ehci-omap 4a064c00.ehci: EHCI Host Controller [ 1.589385] ehci-omap 4a064c00.ehci: new USB bus registered, assigned bus number 1 [ 1.597686] ehci-omap 4a064c00.ehci: irq 109, io mem 0x4a064c00 [ 1.619018] ehci-omap 4a064c00.ehci: USB 2.0 started, EHCI 1.00 [ 1.625946] hub 1-0:1.0: USB hub found [ 1.629943] hub 1-0:1.0: 3 ports detected [ 1.634643] ehci-orion: EHCI orion driver [ 1.639068] SPEAr-ehci: EHCI SPEAr driver [ 1.643432] tegra-ehci: Tegra EHCI driver [ 1.648315] usbcore: registered new interface driver usb-storage [ 1.656433] mousedev: PS/2 mouse device common for all mice [ 1.664367] i2c /dev entries driver [ 1.668853] usbcore: registered new interface driver uvcvideo [ 1.674926] USB Video Class driver (1.1.1) [ 1.679260] gspca_main: v2.14.0 registered [ 1.685638] sdhci: Secure Digital Host Controller Interface driver [ 1.692138] sdhci: Copyright(c) Pierre Ossman [ 1.697448] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 1.704376] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.712066] omap_hsmmc 480d5000.mmc: unable to get vmmc regulator -517 [ 1.718963] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.726867] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.733734] usbcore: registered new interface driver usbhid [ 1.739593] usbhid: USB HID core driver [ 1.747558] TCP: cubic registered [ 1.751068] NET: Registered protocol family 17 [ 1.755920] Key type dns_resolver registered [ 1.760925] Power Management for TI OMAP4+ devices. [ 1.766082] Power Management for TI OMAP4. [ 1.770416] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.777801] ThumbEE CPU extension supported. [ 1.782287] Registering SWP/SWPB emulation handler [ 1.787994] vwl1271: 1800 mV [ 1.796539] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.805755] twl 0-0048: PIH (irq 39) nested IRQs [ 1.812072] twl_rtc rtc.15: Enabling TWL-RTC [ 1.819091] twl_rtc rtc.15: rtc core: registered rtc.15 as rtc0 [ 1.825927] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.832031] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.838073] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.844146] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.849731] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.855194] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.860198] VDAC: 1800 mV [ 1.863922] VANA: 2100 mV [ 1.867492] VCXIO: 1800 mV [ 1.867492] VUSB: 3300 mV [ 1.874420] V1V8: 1800 mV [ 1.877990] V2V1: 2100 mV [ 1.885650] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 1.959075] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.110656] hub 1-1:1.0: USB hub found [ 2.115234] hub 1-1:1.0: 5 ports detected [ 2.499206] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.663970] smsc95xx v1.0.4 [ 2.737579] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, d2:f6:17:4e:a7:1a ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 143.10 seconds. # PYBOOT: Result: FAIL

10 years, 8 months

next boot: 30 passed 2 failed (next/next-20140422)

by Olof's autobooter

Failed boards: cubie2 sunxi_defconfig : FAILED 1:18.27 snowball multi_v7_defconfig : FAILED 1:19.92 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:10.90 arndale exynos_defconfig : passed 1:00.33 bbb omap2plus_defconfig : passed 1:33.39 bbb multi_v7_defconfig : passed 1:16.68 beaver tegra_defconfig : passed 0:50.01 beaver multi_v7_defconfig : passed 0:51.81 capri bcm_defconfig : passed 0:42.21 capri multi_v7_defconfig : passed 0:44.68 cubie sunxi_defconfig : passed 1:03.83 cubie multi_v7_defconfig : passed 1:09.62 cubie2 multi_v7_defconfig : passed 1:15.36 cubie2 multi_lpae_defconfig : passed 1:16.01 dalmore tegra_defconfig : passed 1:21.91 dalmore multi_v7_defconfig : passed 1:18.40 dalmore multi_lpae_defconfig : passed 1:45.61 hummingboard imx_v6_v7_defconfig : passed 1:19.28 hummingboard multi_v7_defconfig : passed 1:08.09 omap5uevm omap2plus_defconfig : warnings 1:05.25 omap5uevm multi_v7_defconfig : warnings 1:44.48 omap5uevm multi_lpae_defconfig : warnings 1:41.80 panda omap2plus_defconfig : warnings 1:16.07 panda multi_v7_defconfig : passed 1:27.75 sama5 sama5_defconfig : passed 1:50.93 seaboard multi_v7_defconfig : passed 1:07.39 snow exynos_defconfig : passed 1:27.03 snowball u8500_defconfig : passed 1:17.43 trimslice tegra_defconfig : passed 1:02.72 trimslice multi_v7_defconfig : passed 0:59.45 wandboard imx_v6_v7_defconfig : passed 0:59.02 wandboard multi_v7_defconfig : passed 0:48.33 Offline boards: seaboard tegra_defconfig : OFFLINE 0:46.72 Board legend is available at http://arm-soc.lixom.net/boards.html Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.018208] platform ahci-5v.2: Driver reg-fixed-voltage requests probe deferral [ 0.018235] reg-fixed-voltage usb1-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 0.018248] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.018268] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.018280] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.019320] Switched to clocksource arch_sys_counter [ 0.026484] NET: Registered protocol family 2 [ 0.026947] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.027035] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.027156] TCP: Hash tables configured (established 8192 bind 8192) [ 0.027238] TCP: reno registered [ 0.027252] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.027309] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.027523] NET: Registered protocol family 1 [ 0.027932] RPC: Registered named UNIX socket transport module. [ 0.027945] RPC: Registered udp transport module. [ 0.027951] RPC: Registered tcp transport module. [ 0.027957] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.029016] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.029670] bounce pool size: 64 pages [ 0.037570] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.037593] io scheduler noop registered [ 0.037604] io scheduler deadline registered [ 0.037793] io scheduler cfq registered (default) [ 0.039539] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.080835] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.083291] console [ttyS0] disabled [ 0.103488] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.618823] console [ttyS0] enabled [ 0.623607] mousedev: PS/2 mouse device common for all mice [ 0.629518] i2c /dev entries driver [ 0.634366] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.643501] TCP: cubic registered [ 0.646829] NET: Registered protocol family 17 [ 0.651409] Registering SWP/SWPB emulation handler [ 0.657189] ahci-5v: 5000 mV [ 0.660488] usb1-vbus: 5000 mV [ 0.663856] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 2 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.165 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $tftp 0x01000000 tmpj_LYzJ-uImage tftp 0x01000000 tmpj_LYzJ-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.165 Filename 'tmpj_LYzJ-uImage'. Load address: 0x1000000 Loading: *################################################################T # ################################################################# ################################################################# ################################################################# ############################################################ done Bytes transferred = 4695241 (47a4c9 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $bootm 0x01000000 bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4695177 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout

10 years, 8 months

next build: 128585 warnings 1 failures (next/next-20140422)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next, found at: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch) Topmost commit: d67b8fc Add linux-next specific files for 20140422 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next/next-20140422/ Runtime: 42m 7s Passed: 123 Failed: 1 Warnings: 128585 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: omap2plus_defconfig ------------------------------------------------------------------------------- Errors: omap2plus_defconfig: ERROR: "devm_snd_soc_register_platform" [sound/soc/omap/snd-soc-omap.ko] undefined! Warnings: 1 buildall.arm.acs5k_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.acs5k_tiny_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.am200epdkit_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.ape6evm_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.armadillo800eva_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.assabet_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.at91_dt_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.at91rm9200_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.at91sam9260_9g20_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.at91sam9261_9g10_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.at91sam9263_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.at91sam9g45_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.at91sam9rl_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.at91x40_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.badge4_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.bcm2835_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.bcm_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.bockw_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.cerfcube_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.clps711x_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.cm_x2xx_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.cm_x300_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.cns3420vb_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.colibri_pxa270_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.colibri_pxa300_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.collie_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.corgi_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.davinci_all_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.dove_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.ebsa110_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.efm32_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.em_x270_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.ep93xx_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.eseries_pxa_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.exynos_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.ezx_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.footbridge_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.genmai_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.h3600_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.h5000_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.hackkit_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.hi3xxx_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.imote2_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.imx_v4_v5_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.imx_v6_v7_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.integrator_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.iop13xx_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.iop32x_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.iop33x_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.ixp4xx_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.jornada720_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.keystone_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.kirkwood_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.koelsch_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.ks8695_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.kzm9g_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.lager_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.lart_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.lpc32xx_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.lpd270_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.lubbock_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.mackerel_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.magician_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.mainstone_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.marzen_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.mini2440_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.mmp2_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.moxart_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.msm_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.multi_lpae_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.multi_v5_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.multi_v7_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.mv78xx0_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.mvebu_v5_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.mvebu_v7_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.mxs_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.neponset_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.netwinder_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.netx_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.nhk8815_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.nuc910_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.nuc950_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.nuc960_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.omap1_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.omap2plus_defconfig.log.failed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.orion5x_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.palmz72_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.pcm027_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.pleb_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.prima2_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.pxa168_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.pxa255-idp_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.pxa3xx_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.pxa910_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.raumfeld_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.realview_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.realview-smp_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.rpc_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.s3c2410_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.s3c6400_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.s5p64x0_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.s5pc100_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.s5pv210_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.sama5_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.shannon_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.shmobile_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.simpad_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.socfpga_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.spear13xx_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.spear3xx_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.spear6xx_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.spitz_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.sunxi_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.tct_hammer_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.tegra_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.trizeps4_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.u300_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.u8500_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.versatile_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.vexpress_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.viper_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.vt8500_v6_v7_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.xcep_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 buildall.arm.zeus_defconfig.log.passed:<stdin>:1232:2: warning: #warning syscall renameat2 not implemented [-Wcpp] 1 drivers/irqchip/irq-clps711x.c:78:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 1 drivers/pci/host/pci-mvebu.c:334:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 128454 arch/arm/include/asm/memory.h:297:0: warning: "virt_to_pfn" redefined [enabled by default] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1ba0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

10 years, 8 months

mainline boot: 31 passed 2 failed (mainline/v3.15-rc2-42-g4d0fa8a)

by Olof's autobooter

Failed boards: cubie2 sunxi_defconfig : FAILED 1:21.73 snowball multi_v7_defconfig : FAILED 1:08.00 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:14.64 arndale exynos_defconfig : passed 1:09.16 bbb omap2plus_defconfig : passed 1:38.00 bbb multi_v7_defconfig : passed 1:19.15 beaver tegra_defconfig : passed 0:55.17 beaver multi_v7_defconfig : passed 0:49.21 capri bcm_defconfig : passed 0:46.02 capri multi_v7_defconfig : passed 0:44.50 cubie sunxi_defconfig : passed 1:00.85 cubie multi_v7_defconfig : passed 1:01.76 cubie2 multi_v7_defconfig : passed 1:07.87 cubie2 multi_lpae_defconfig : passed 1:01.74 dalmore tegra_defconfig : passed 1:39.46 dalmore multi_v7_defconfig : passed 1:16.13 dalmore multi_lpae_defconfig : passed 1:16.02 hummingboard imx_v6_v7_defconfig : passed 1:19.68 hummingboard multi_v7_defconfig : passed 1:07.03 omap5uevm omap2plus_defconfig : warnings 1:31.23 omap5uevm multi_v7_defconfig : warnings 1:44.27 omap5uevm multi_lpae_defconfig : warnings 1:40.73 panda omap2plus_defconfig : warnings 1:15.30 panda multi_v7_defconfig : passed 2:14.78 sama5 sama5_defconfig : passed 1:53.80 seaboard tegra_defconfig : passed 1:04.38 seaboard multi_v7_defconfig : passed 1:11.69 snow exynos_defconfig : passed 1:28.15 snowball u8500_defconfig : passed 2:03.13 trimslice tegra_defconfig : passed 1:01.83 trimslice multi_v7_defconfig : passed 1:03.39 wandboard imx_v6_v7_defconfig : passed 0:58.03 wandboard multi_v7_defconfig : passed 0:49.31 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.017737] platform ahci-5v.2: Driver reg-fixed-voltage requests probe deferral [ 0.017760] reg-fixed-voltage usb1-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 0.017773] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.017795] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.017807] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.018753] Switched to clocksource arch_sys_counter [ 0.025873] NET: Registered protocol family 2 [ 0.026340] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.026426] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.026547] TCP: Hash tables configured (established 8192 bind 8192) [ 0.026631] TCP: reno registered [ 0.026647] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.026702] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.026905] NET: Registered protocol family 1 [ 0.027305] RPC: Registered named UNIX socket transport module. [ 0.027318] RPC: Registered udp transport module. [ 0.027324] RPC: Registered tcp transport module. [ 0.027330] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.028295] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.028839] bounce pool size: 64 pages [ 0.036602] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.036624] io scheduler noop registered [ 0.036630] io scheduler deadline registered [ 0.036809] io scheduler cfq registered (default) [ 0.038466] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.080462] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.082868] console [ttyS0] disabled [ 0.103062] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.618557] console [ttyS0] enabled [ 0.623280] mousedev: PS/2 mouse device common for all mice [ 0.629162] i2c /dev entries driver [ 0.633955] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.642951] TCP: cubic registered [ 0.646273] NET: Registered protocol family 17 [ 0.650836] Registering SWP/SWPB emulation handler [ 0.656575] ahci-5v: 5000 mV [ 0.659861] usb1-vbus: 5000 mV [ 0.663220] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.165 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x01000000 tmphzZhMZ-uImage tftp 0x01000000 tmphzZhMZ-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.165 Filename 'tmphzZhMZ-uImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################ done Bytes transferred = 4691073 (479481 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x01000000 bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4691009 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout

10 years, 8 months

Tegra baseline test results for v3.15-rc2

by Paul Walmsley

Here are some basic Tegra test results for Linux v3.15-rc2. Logs and other details at: http://nvt.pwsan.com/pub/linux/testlogs/test_v3.15-rc2/20140420113108/ Test summary ------------ Build: zImage: Pass: ( 2/ 2): multi_v7_defconfig, tegra_defconfig Boot to userspace: multi_v7_defconfig: Pass: ( 2/ 2): tegra114-dalmore-a04, tegra30-beaver Boot to userspace: tegra_defconfig: Pass: ( 2/ 2): tegra114-dalmore-a04, tegra30-beaver vmlinux object size (delta in bytes from test_v3.15-rc1 (c9eaa447e77efe77b7fa4c953bd62de8297fd6c5)): text data bss total kernel +713 +72 0 +785 multi_v7_defconfig +349 -16 0 +333 tegra_defconfig Boot-time memory difference (delta in bytes from test_v3.15-rc1 (c9eaa447e77efe77b7fa4c953bd62de8297fd6c5)) avail rsrvd high freed board kconfig dtb -4k 4k . . tegra114-dalmore-a04 multi_v7_defconfig tegra114-dalmore . . . . tegra114-dalmore-a04 tegra_defconfig tegra114-dalmore -4k 4k . . tegra30-beaver multi_v7_defconfig tegra30-beaver . . . . tegra30-beaver tegra_defconfig tegra30-beaver

10 years, 8 months

← Newer
1
...
4
5
6
7
8
9
10
...
32
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports April 2014