Kernel-build-reports May 2014

kernel-build-reports@lists.linaro.org

20 participants
299 discussions

mainline build: 7 warnings 0 failures (mainline/v3.15-rc3-144-g54366a7)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 54366a7 Merge tag 'dm-3.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.15-rc3-144-g54366a7/ Runtime: 41m 19s Passed: 124 Failed: 0 Warnings: 7 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/irqchip/irq-clps711x.c:78:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1ba0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

10 years

mainline boot: 48 pass, 1 fail (v3.15-rc3-135-ge7e6d2a)

by Kevin's boot bot

Tree/Branch: mainline Git describe: v3.15-rc3-135-ge7e6d2a Failed boot tests (console logs at the end) =========================================== omap5-uevm: OFFLINE: arm-multi_v7_defconfig Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.6 sec: PASS da850-evm 0 min 15.5 sec: PASS arm-tegra_defconfig ------------------- tegra30-beaver 0 min 17.2 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 57.0 sec: PASS am335x-boneblack 0 min 43.9 sec: PASS omap3-beagle-xm 1 min 0.8 sec: PASS legacy,3530beagle 0 min 38.0 sec: PASS (Warnings: 1) omap4-panda 1 min 5.6 sec: PASS omap3-overo-tobi 0 min 23.1 sec: PASS (Warnings: 1) am335x-bone 0 min 27.5 sec: PASS omap3-overo-storm-tobi 0 min 22.0 sec: PASS omap5-uevm 1 min 3.7 sec: PASS (Warnings: 1) omap3-n900 0 min 16.4 sec: PASS (Warnings: 1) legacy,n900 0 min 16.9 sec: PASS (Warnings: 1) omap4-panda-es 1 min 17.8 sec: PASS legacy,3730storm 0 min 20.0 sec: PASS legacy,3530overo 0 min 24.4 sec: PASS (Warnings: 1) arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 18.7 sec: PASS imx6dl-wandboard,wand-solo 0 min 18.6 sec: PASS imx6q-wandboard 0 min 16.8 sec: PASS arm-multi_v7_defconfig ---------------------- qcom-apq8074-dragonboard 0 min 17.3 sec: PASS ste-snowball 1 min 18.2 sec: PASS tegra30-beaver 0 min 19.6 sec: PASS am335x-boneblack 0 min 37.8 sec: PASS omap3-beagle-xm 0 min 51.8 sec: PASS sun7i-a20-cubieboard2 0 min 12.3 sec: PASS armada-370-mirabox 0 min 22.5 sec: PASS omap4-panda 0 min 52.5 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.5 sec: PASS sun4i-a10-cubieboard 0 min 18.8 sec: PASS bcm28155-ap 0 min 26.7 sec: PASS omap3-overo-tobi 0 min 22.1 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.7 sec: PASS am335x-bone 0 min 26.8 sec: PASS omap3-overo-storm-tobi 0 min 24.1 sec: PASS omap5-uevm 0 min 31.4 sec: OFFLINE omap3-n900 0 min 16.0 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 16.7 sec: PASS omap4-panda-es 0 min 52.1 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.1 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 22.8 sec: PASS sun4i-a10-cubieboard 0 min 13.1 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 24.8 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 32.1 sec: PASS exynos5250-arndale 0 min 30.6 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 0 min 30.9 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.4 sec: PASS armada-370-mirabox 0 min 20.4 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 17.2 sec: PASS Console logs for failures ========================= arm-multi_v7_defconfig ---------------------- omap5-uevm: OFFLINE: last 80 lines of boot log: ----------------------------------------------- Connected to omap5uevm console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(omap5uevm console)> hardreset (user:khilman) Reboot omap5uevm Reboot: omap5uevm ; phidget 1 2 : ('off', 4, 'on') , sleep 4, found: 002/125 2 ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.38 seconds. # PYBOOT: Result: OFFLINE

10 years

mainline boot: 30 passed 2 failed (mainline/v3.15-rc3-135-ge7e6d2a)

by Olof's autobooter

Failed boards: cubie2 sunxi_defconfig : FAILED 1:18.92 snowball multi_v7_defconfig : FAILED 1:16.12 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:13.76 arndale exynos_defconfig : passed 1:03.52 bbb omap2plus_defconfig : passed 1:33.41 bbb multi_v7_defconfig : passed 1:23.37 beaver tegra_defconfig : passed 0:55.31 beaver multi_v7_defconfig : passed 0:50.64 capri bcm_defconfig : passed 0:43.58 capri multi_v7_defconfig : passed 0:44.44 cubie sunxi_defconfig : passed 0:57.89 cubie multi_v7_defconfig : passed 1:01.09 cubie2 multi_v7_defconfig : passed 1:24.50 cubie2 multi_lpae_defconfig : passed 1:10.11 dalmore tegra_defconfig : passed 1:19.80 dalmore multi_v7_defconfig : passed 1:17.39 dalmore multi_lpae_defconfig : passed 1:17.25 hummingboard imx_v6_v7_defconfig : passed 1:23.45 hummingboard multi_v7_defconfig : passed 1:11.73 omap5uevm multi_v7_defconfig : warnings 1:40.85 omap5uevm multi_lpae_defconfig : warnings 1:41.56 panda omap2plus_defconfig : warnings 1:19.76 panda multi_v7_defconfig : passed 1:37.62 sama5 sama5_defconfig : passed 1:54.96 seaboard tegra_defconfig : passed 1:57.47 seaboard multi_v7_defconfig : passed 1:03.96 snow exynos_defconfig : passed 1:31.90 snowball u8500_defconfig : passed 1:41.33 trimslice tegra_defconfig : passed 0:58.11 trimslice multi_v7_defconfig : passed 1:10.51 wandboard imx_v6_v7_defconfig : passed 0:57.38 wandboard multi_v7_defconfig : passed 1:01.37 Offline boards: omap5uevm omap2plus_defconfig : OFFLINE 2:18.41 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.017691] platform ahci-5v.2: Driver reg-fixed-voltage requests probe deferral [ 0.017715] reg-fixed-voltage usb1-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 0.017727] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.017749] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.017762] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.018704] Switched to clocksource arch_sys_counter [ 0.025844] NET: Registered protocol family 2 [ 0.026317] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.026407] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.026528] TCP: Hash tables configured (established 8192 bind 8192) [ 0.026614] TCP: reno registered [ 0.026627] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.026684] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.026880] NET: Registered protocol family 1 [ 0.027272] RPC: Registered named UNIX socket transport module. [ 0.027285] RPC: Registered udp transport module. [ 0.027290] RPC: Registered tcp transport module. [ 0.027296] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.028272] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.028838] bounce pool size: 64 pages [ 0.036563] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.036580] io scheduler noop registered [ 0.036586] io scheduler deadline registered [ 0.036766] io scheduler cfq registered (default) [ 0.038412] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.080701] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.083136] console [ttyS0] disabled [ 0.103335] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.618757] console [ttyS0] enabled [ 0.623478] mousedev: PS/2 mouse device common for all mice [ 0.629350] i2c /dev entries driver [ 0.634158] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.643150] TCP: cubic registered [ 0.646470] NET: Registered protocol family 17 [ 0.651031] Registering SWP/SWPB emulation handler [ 0.656752] ahci-5v: 5000 mV [ 0.660045] usb1-vbus: 5000 mV [ 0.663405] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- node: snowball status: on *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.109 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x01000000 tmp/snowball-AM6Sd8/tmpY0qteb-uImage tftp 0x01000000 tmp/snowball-AM6Sd8/tmpY0qteb-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.109 Filename 'tmp/snowball-AM6Sd8/tmpY0qteb-uImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################ done Bytes transferred = 4690513 (479251 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x01000000 bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4690449 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout

10 years

mainline build: 7 warnings 0 failures (mainline/v3.15-rc3-135-ge7e6d2a)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: e7e6d2a Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.15-rc3-135-ge7e6d2a/ Runtime: 41m 20s Passed: 124 Failed: 0 Warnings: 7 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/irqchip/irq-clps711x.c:78:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1ba0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

10 years

next boot: 29 passed 3 failed (next/next-20140502)

by Olof's autobooter

Failed boards: cubie2 sunxi_defconfig : FAILED 1:18.35 panda multi_v7_defconfig : FAILED 1:35.32 snowball multi_v7_defconfig : FAILED 1:10.97 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:15.61 arndale exynos_defconfig : passed 1:01.31 bbb omap2plus_defconfig : passed 1:32.32 bbb multi_v7_defconfig : passed 1:18.63 beaver tegra_defconfig : passed 0:51.31 beaver multi_v7_defconfig : passed 0:50.72 capri bcm_defconfig : passed 0:43.14 capri multi_v7_defconfig : passed 1:14.77 cubie sunxi_defconfig : passed 0:53.09 cubie multi_v7_defconfig : passed 1:00.96 cubie2 multi_v7_defconfig : passed 1:13.15 cubie2 multi_lpae_defconfig : passed 0:56.80 dalmore tegra_defconfig : passed 1:19.99 dalmore multi_v7_defconfig : passed 1:16.36 dalmore multi_lpae_defconfig : passed 1:19.78 hummingboard imx_v6_v7_defconfig : passed 1:27.83 hummingboard multi_v7_defconfig : passed 1:12.66 omap5uevm omap2plus_defconfig : warnings 1:11.35 omap5uevm multi_v7_defconfig : warnings 1:46.79 omap5uevm multi_lpae_defconfig : warnings 1:40.72 panda omap2plus_defconfig : warnings 1:14.15 seaboard tegra_defconfig : passed 1:03.19 seaboard multi_v7_defconfig : passed 1:05.99 snow exynos_defconfig : passed 1:29.98 snowball u8500_defconfig : passed 1:33.36 trimslice tegra_defconfig : passed 0:59.38 trimslice multi_v7_defconfig : passed 1:29.47 wandboard imx_v6_v7_defconfig : passed 0:57.08 wandboard multi_v7_defconfig : passed 0:52.67 Offline boards: sama5 sama5_defconfig : OFFLINE 1:16.20 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.018388] platform ahci-5v.2: Driver reg-fixed-voltage requests probe deferral [ 0.018411] reg-fixed-voltage usb1-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 0.018425] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.018445] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.018457] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.019506] Switched to clocksource arch_sys_counter [ 0.026767] NET: Registered protocol family 2 [ 0.027221] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.027309] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.027430] TCP: Hash tables configured (established 8192 bind 8192) [ 0.027512] TCP: reno registered [ 0.027526] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.027582] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.027801] NET: Registered protocol family 1 [ 0.028219] RPC: Registered named UNIX socket transport module. [ 0.028231] RPC: Registered udp transport module. [ 0.028237] RPC: Registered tcp transport module. [ 0.028243] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.029307] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.029985] bounce: pool size: 64 pages [ 0.037844] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.037866] io scheduler noop registered [ 0.037879] io scheduler deadline registered [ 0.038066] io scheduler cfq registered (default) [ 0.039821] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.082117] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.084576] console [ttyS0] disabled [ 0.104770] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.620129] console [ttyS0] enabled [ 0.624934] mousedev: PS/2 mouse device common for all mice [ 0.630850] i2c /dev entries driver [ 0.635707] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.644863] TCP: cubic registered [ 0.648192] NET: Registered protocol family 17 [ 0.652780] Registering SWP/SWPB emulation handler [ 0.658583] ahci-5v: 5000 mV [ 0.661879] usb1-vbus: 5000 mV [ 0.665242] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.659637] omap_hsmmc 480d5000.mmc: unable to get vmmc regulator -517 [ 1.666503] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.674407] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.681304] usbcore: registered new interface driver usbhid [ 1.687133] usbhid: USB HID core driver [ 1.695465] TCP: cubic registered [ 1.698944] NET: Registered protocol family 17 [ 1.703796] Key type dns_resolver registered [ 1.708740] Power Management for TI OMAP4+ devices. [ 1.713867] Power Management for TI OMAP4. [ 1.718139] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.725219] ThumbEE CPU extension supported. [ 1.729980] Registering SWP/SWPB emulation handler [ 1.736236] vwl1271: 1800 mV [ 1.740570] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.750335] twl 0-0048: PIH (irq 39) nested IRQs [ 1.755950] twl_rtc rtc.15: Power up reset detected. [ 1.761871] twl_rtc rtc.15: Enabling TWL-RTC [ 1.768737] twl_rtc rtc.15: rtc core: registered rtc.15 as rtc0 [ 1.775726] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.781829] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.787933] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.794006] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.799560] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.804962] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.809997] VDAC: 1800 mV [ 1.810455] VANA: 2100 mV [ 1.817291] VCXIO: 1800 mV [ 1.817291] VUSB: 3300 mV [ 1.824218] V1V8: 1800 mV [ 1.827819] V2V1: 2100 mV [ 1.833770] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 1.906555] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.057800] hub 1-1:1.0: USB hub found [ 2.062347] hub 1-1:1.0: 5 ports detected [ 2.526367] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.657470] smsc95xx v1.0.4 [ 2.725494] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, 52:f0:19:ea:24:52 ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.110 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x01000000 tmp/snowball-u9HpYv/tmprGzisd-uImage tftp 0x01000000 tmp/snowball-u9HpYv/tmprGzisd-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.110 Filename 'tmp/snowball-u9HpYv/tmprGzisd-uImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################# done Bytes transferred = 4705889 (47ce61 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $bootm 0x01000000 bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4705825 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout

10 years

mainline boot: 29 passed 3 failed (mainline/v3.15-rc3-121-gb7270cc)

by Olof's autobooter

Failed boards: cubie2 sunxi_defconfig : FAILED 1:18.91 panda multi_v7_defconfig : FAILED 1:35.04 snowball multi_v7_defconfig : FAILED 1:11.27 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:15.82 arndale exynos_defconfig : passed 1:02.83 bbb omap2plus_defconfig : passed 1:33.32 bbb multi_v7_defconfig : passed 1:23.97 beaver tegra_defconfig : passed 0:53.45 beaver multi_v7_defconfig : passed 0:54.56 capri bcm_defconfig : passed 0:43.66 capri multi_v7_defconfig : passed 0:45.36 cubie sunxi_defconfig : passed 0:57.97 cubie multi_v7_defconfig : passed 1:16.92 cubie2 multi_v7_defconfig : passed 1:10.98 cubie2 multi_lpae_defconfig : passed 1:08.38 dalmore tegra_defconfig : passed 1:29.56 dalmore multi_v7_defconfig : passed 1:17.13 dalmore multi_lpae_defconfig : passed 1:16.50 hummingboard imx_v6_v7_defconfig : passed 1:24.96 hummingboard multi_v7_defconfig : passed 1:07.33 omap5uevm omap2plus_defconfig : warnings 1:12.66 omap5uevm multi_v7_defconfig : warnings 1:43.91 omap5uevm multi_lpae_defconfig : warnings 1:39.51 panda omap2plus_defconfig : warnings 1:19.13 sama5 sama5_defconfig : passed 1:53.29 seaboard tegra_defconfig : passed 1:10.85 snow exynos_defconfig : passed 1:36.05 snowball u8500_defconfig : passed 1:36.47 trimslice tegra_defconfig : passed 0:59.40 trimslice multi_v7_defconfig : passed 1:03.53 wandboard imx_v6_v7_defconfig : passed 0:55.84 wandboard multi_v7_defconfig : passed 0:53.86 Offline boards: seaboard multi_v7_defconfig : OFFLINE 0:45.15 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.017758] platform ahci-5v.2: Driver reg-fixed-voltage requests probe deferral [ 0.017781] reg-fixed-voltage usb1-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 0.017794] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.017815] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.017828] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.018772] Switched to clocksource arch_sys_counter [ 0.025956] NET: Registered protocol family 2 [ 0.026430] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.026516] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.026637] TCP: Hash tables configured (established 8192 bind 8192) [ 0.026721] TCP: reno registered [ 0.026737] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.026792] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.026989] NET: Registered protocol family 1 [ 0.027378] RPC: Registered named UNIX socket transport module. [ 0.027392] RPC: Registered udp transport module. [ 0.027398] RPC: Registered tcp transport module. [ 0.027404] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.028376] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.028929] bounce pool size: 64 pages [ 0.036653] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.036670] io scheduler noop registered [ 0.036676] io scheduler deadline registered [ 0.036857] io scheduler cfq registered (default) [ 0.038511] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.080879] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.083354] console [ttyS0] disabled [ 0.103555] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.618976] console [ttyS0] enabled [ 0.623691] mousedev: PS/2 mouse device common for all mice [ 0.629559] i2c /dev entries driver [ 0.634377] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.643363] TCP: cubic registered [ 0.646684] NET: Registered protocol family 17 [ 0.651250] Registering SWP/SWPB emulation handler [ 0.656970] ahci-5v: 5000 mV [ 0.660249] usb1-vbus: 5000 mV [ 0.663604] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.639343] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.647247] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.654144] usbcore: registered new interface driver usbhid [ 1.660003] usbhid: USB HID core driver [ 1.668060] TCP: cubic registered [ 1.671569] NET: Registered protocol family 17 [ 1.676391] Key type dns_resolver registered [ 1.681335] Power Management for TI OMAP4+ devices. [ 1.686492] Power Management for TI OMAP4. [ 1.690795] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.697937] ThumbEE CPU extension supported. [ 1.702697] Registering SWP/SWPB emulation handler [ 1.708404] vwl1271: 1800 mV [ 1.713653] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.722839] twl 0-0048: PIH (irq 39) nested IRQs [ 1.728515] twl_rtc rtc.15: Power up reset detected. [ 1.735076] twl_rtc rtc.15: Enabling TWL-RTC [ 1.742095] twl_rtc rtc.15: rtc core: registered rtc.15 as rtc0 [ 1.748931] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.755035] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.761138] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.767181] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.772827] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.778259] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.783264] VDAC: 1800 mV [ 1.783264] VANA: 2100 mV [ 1.790557] VCXIO: 1800 mV [ 1.793548] VUSB: 3300 mV [ 1.797515] V1V8: 1800 mV [ 1.801116] V2V1: 2100 mV [ 1.898864] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.042572] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 2.051177] hub 1-1:1.0: USB hub found [ 2.055389] hub 1-1:1.0: 5 ports detected [ 2.061218] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 2.393890] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.535339] smsc95xx v1.0.4 [ 3.121643] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, 42:66:d6:c2:83:6c ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.110 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x01000000 tmp/snowball-ZpOXKz/tmpC2CqsM-uImage tftp 0x01000000 tmp/snowball-ZpOXKz/tmpC2CqsM-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.110 Filename 'tmp/snowball-ZpOXKz/tmpC2CqsM-uImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################ done Bytes transferred = 4690513 (479251 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $bootm 0x01000000 bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4690449 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout

10 years

mainline boot: 29 passed 3 failed (mainline/v3.15-rc3-116-gb5f3c61)

by Olof's autobooter

Failed boards: cubie2 sunxi_defconfig : FAILED 1:18.96 panda multi_v7_defconfig : FAILED 1:37.36 snowball multi_v7_defconfig : FAILED 1:11.13 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:11.43 arndale exynos_defconfig : passed 1:02.02 bbb omap2plus_defconfig : passed 1:32.11 bbb multi_v7_defconfig : passed 1:25.60 beaver tegra_defconfig : passed 0:51.61 beaver multi_v7_defconfig : passed 0:48.51 capri bcm_defconfig : passed 0:42.79 capri multi_v7_defconfig : passed 0:45.29 cubie sunxi_defconfig : passed 1:10.70 cubie multi_v7_defconfig : passed 1:00.04 cubie2 multi_v7_defconfig : passed 1:22.33 cubie2 multi_lpae_defconfig : passed 0:55.45 dalmore tegra_defconfig : passed 1:27.86 dalmore multi_v7_defconfig : passed 1:19.94 dalmore multi_lpae_defconfig : passed 1:20.87 hummingboard imx_v6_v7_defconfig : passed 1:22.79 hummingboard multi_v7_defconfig : passed 1:14.13 omap5uevm multi_v7_defconfig : warnings 1:41.75 omap5uevm multi_lpae_defconfig : warnings 1:41.40 panda omap2plus_defconfig : warnings 1:12.99 sama5 sama5_defconfig : passed 1:53.07 seaboard tegra_defconfig : passed 0:59.86 seaboard multi_v7_defconfig : passed 1:13.34 snow exynos_defconfig : passed 1:28.23 snowball u8500_defconfig : passed 1:31.60 trimslice tegra_defconfig : passed 0:56.70 trimslice multi_v7_defconfig : passed 1:10.79 wandboard imx_v6_v7_defconfig : passed 0:57.02 wandboard multi_v7_defconfig : passed 0:59.20 Offline boards: omap5uevm omap2plus_defconfig : OFFLINE 2:17.79 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.017685] platform ahci-5v.2: Driver reg-fixed-voltage requests probe deferral [ 0.017710] reg-fixed-voltage usb1-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 0.017723] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.017746] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.017758] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.018705] Switched to clocksource arch_sys_counter [ 0.025857] NET: Registered protocol family 2 [ 0.026321] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.026408] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.026529] TCP: Hash tables configured (established 8192 bind 8192) [ 0.026615] TCP: reno registered [ 0.026629] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.026687] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.026890] NET: Registered protocol family 1 [ 0.027280] RPC: Registered named UNIX socket transport module. [ 0.027295] RPC: Registered udp transport module. [ 0.027301] RPC: Registered tcp transport module. [ 0.027307] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.028291] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.028842] bounce pool size: 64 pages [ 0.036576] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.036594] io scheduler noop registered [ 0.036600] io scheduler deadline registered [ 0.036782] io scheduler cfq registered (default) [ 0.038435] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.080795] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.083238] console [ttyS0] disabled [ 0.103438] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.618868] console [ttyS0] enabled [ 0.623581] mousedev: PS/2 mouse device common for all mice [ 0.629466] i2c /dev entries driver [ 0.634274] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.643272] TCP: cubic registered [ 0.646592] NET: Registered protocol family 17 [ 0.651155] Registering SWP/SWPB emulation handler [ 0.656878] ahci-5v: 5000 mV [ 0.660176] usb1-vbus: 5000 mV [ 0.663533] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.632446] omap_hsmmc 480d5000.mmc: unable to get vmmc regulator -517 [ 1.639373] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.647277] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.654174] usbcore: registered new interface driver usbhid [ 1.660034] usbhid: USB HID core driver [ 1.668121] TCP: cubic registered [ 1.671630] NET: Registered protocol family 17 [ 1.676452] Key type dns_resolver registered [ 1.681427] Power Management for TI OMAP4+ devices. [ 1.686584] Power Management for TI OMAP4. [ 1.690887] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.697998] ThumbEE CPU extension supported. [ 1.702789] Registering SWP/SWPB emulation handler [ 1.708465] vwl1271: 1800 mV [ 1.713012] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.722930] twl 0-0048: PIH (irq 39) nested IRQs [ 1.728576] twl_rtc rtc.15: Power up reset detected. [ 1.734436] twl_rtc rtc.15: Enabling TWL-RTC [ 1.741241] twl_rtc rtc.15: rtc core: registered rtc.15 as rtc0 [ 1.748168] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.754272] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.760345] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.766387] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.771942] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.777374] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.782836] VDAC: 1800 mV [ 1.782836] VANA: 2100 mV [ 1.789672] VCXIO: 1800 mV [ 1.789672] VUSB: 3300 mV [ 1.796600] V1V8: 1800 mV [ 1.800170] V2V1: 2100 mV [ 1.806152] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 1.879364] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.049926] hub 1-1:1.0: USB hub found [ 2.054016] hub 1-1:1.0: 5 ports detected [ 2.399291] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.530487] smsc95xx v1.0.4 [ 2.605377] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, 6a:91:a5:96:80:c6 ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 2 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.110 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x01000000 tmp/snowball-_Gx6nK/tmprMv8Di-uImage tftp 0x01000000 tmp/snowball-_Gx6nK/tmprMv8Di-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.110 Filename 'tmp/snowball-_Gx6nK/tmprMv8Di-uImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################ done Bytes transferred = 4690513 (479251 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $bootm 0x01000000 bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4690449 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout

10 years

mainline boot: 29 passed 3 failed (mainline/v3.15-rc3-113-gba6728f)

by Olof's autobooter

Failed boards: cubie2 sunxi_defconfig : FAILED 1:21.10 panda multi_v7_defconfig : FAILED 3:09.95 snowball multi_v7_defconfig : FAILED 1:12.83 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:22.22 arndale exynos_defconfig : passed 1:07.15 bbb omap2plus_defconfig : passed 1:35.62 bbb multi_v7_defconfig : passed 1:20.59 beaver tegra_defconfig : passed 0:54.01 beaver multi_v7_defconfig : passed 0:53.66 capri bcm_defconfig : passed 0:43.61 capri multi_v7_defconfig : passed 0:45.19 cubie sunxi_defconfig : passed 1:06.66 cubie multi_v7_defconfig : passed 1:12.01 cubie2 multi_v7_defconfig : passed 1:17.09 cubie2 multi_lpae_defconfig : passed 1:03.41 dalmore tegra_defconfig : passed 1:26.83 dalmore multi_v7_defconfig : passed 1:17.05 dalmore multi_lpae_defconfig : passed 1:17.66 hummingboard imx_v6_v7_defconfig : passed 1:30.54 hummingboard multi_v7_defconfig : passed 1:07.77 omap5uevm multi_v7_defconfig : warnings 1:48.29 omap5uevm multi_lpae_defconfig : warnings 1:42.15 panda omap2plus_defconfig : warnings 1:18.59 sama5 sama5_defconfig : passed 1:58.36 seaboard tegra_defconfig : passed 2:01.01 seaboard multi_v7_defconfig : passed 1:04.85 snow exynos_defconfig : passed 1:34.24 snowball u8500_defconfig : passed 2:10.09 trimslice tegra_defconfig : passed 1:02.89 trimslice multi_v7_defconfig : passed 1:04.51 wandboard imx_v6_v7_defconfig : passed 0:59.19 wandboard multi_v7_defconfig : passed 0:55.91 Offline boards: omap5uevm omap2plus_defconfig : OFFLINE 2:09.00 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.017742] platform ahci-5v.2: Driver reg-fixed-voltage requests probe deferral [ 0.017766] reg-fixed-voltage usb1-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 0.017779] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.017799] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.017812] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.018756] Switched to clocksource arch_sys_counter [ 0.025883] NET: Registered protocol family 2 [ 0.026352] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.026439] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.026559] TCP: Hash tables configured (established 8192 bind 8192) [ 0.026645] TCP: reno registered [ 0.026659] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.026716] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.026916] NET: Registered protocol family 1 [ 0.027305] RPC: Registered named UNIX socket transport module. [ 0.027316] RPC: Registered udp transport module. [ 0.027322] RPC: Registered tcp transport module. [ 0.027328] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.028305] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.028859] bounce pool size: 64 pages [ 0.036623] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.036643] io scheduler noop registered [ 0.036649] io scheduler deadline registered [ 0.036828] io scheduler cfq registered (default) [ 0.038485] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.080784] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.083211] console [ttyS0] disabled [ 0.103411] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.618834] console [ttyS0] enabled [ 0.623568] mousedev: PS/2 mouse device common for all mice [ 0.629448] i2c /dev entries driver [ 0.634255] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.643243] TCP: cubic registered [ 0.646562] NET: Registered protocol family 17 [ 0.651126] Registering SWP/SWPB emulation handler [ 0.656849] ahci-5v: 5000 mV [ 0.660132] usb1-vbus: 5000 mV [ 0.663487] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.766693] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.772186] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.777648] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.783111] VDAC: 1800 mV [ 1.783111] VANA: 2100 mV [ 1.789947] VCXIO: 1800 mV [ 1.792907] VUSB: 3300 mV [ 1.796905] V1V8: 1800 mV [ 1.800476] V2V1: 2100 mV [ 1.899414] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.088256] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 2.095916] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 2.104797] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 2.112274] hub 1-1:1.0: USB hub found [ 2.116363] hub 1-1:1.0: 5 ports detected [ 2.121612] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.129577] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.307281] twl_rtc rtc.15: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.321197] ALSA device list: [ 2.324371] No soundcards found. [ 2.328582] Waiting for root device /dev/mmcblk0p2... [ 2.337097] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.347534] mmc0: new high speed SDHC card at address b368 [ 2.353668] mmcblk0: mmc0:b368 00000 7.51 GiB [ 2.359985] mmcblk0: p1 p2 [ 2.368072] omap_hsmmc 480d5000.mmc: card claims to support voltages below defined range [ 2.386535] mmc1: queuing unknown CIS tuple 0x91 (3 bytes) [ 2.393218] mmc1: new SDIO card at address 0001 [ 2.399230] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.440704] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 2.450164] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 2.474609] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.474609] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 2.500915] devtmpfs: mounted [ 2.504455] Freeing unused kernel memory: 556K (c0a6f000 - c0afa000) [ 2.532073] smsc95xx v1.0.4 [ 2.594482] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, f6:44:f7:b2:bc:91 INIT: version 2.88 booting ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.106 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x01000000 tmp/snowball-0Jb2pr/tmpUZzjKP-uImage tftp 0x01000000 tmp/snowball-0Jb2pr/tmpUZzjKP-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.106 Filename 'tmp/snowball-0Jb2pr/tmpUZzjKP-uImage'. Load address: 0x1000000 Loading: *#####################################T ############################ ################################################################# ################################################################# ################################################################# ############################################################ done Bytes transferred = 4690513 (479251 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x01000000 bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4690449 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout

10 years

next boot: 48 pass, 1 fail (next-20140502)

by Kevin's boot bot

Tree/Branch: next Git describe: next-20140502 Failed boot tests (console logs at the end) =========================================== ste-snowball: FAIL: arm-u8500_defconfig Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.4 sec: PASS da850-evm 0 min 15.3 sec: PASS arm-tegra_defconfig ------------------- tegra30-beaver 0 min 17.7 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 49.8 sec: PASS am335x-boneblack 0 min 44.2 sec: PASS omap3-beagle-xm 0 min 59.1 sec: PASS legacy,3530beagle 0 min 36.1 sec: PASS (Warnings: 1) omap4-panda 1 min 3.8 sec: PASS omap3-overo-tobi 0 min 23.1 sec: PASS (Warnings: 1) am335x-bone 0 min 27.4 sec: PASS omap3-overo-storm-tobi 0 min 21.6 sec: PASS omap5-uevm 1 min 7.8 sec: PASS (Warnings: 1) omap3-n900 0 min 16.2 sec: PASS (Warnings: 1) legacy,n900 0 min 16.9 sec: PASS (Warnings: 1) omap4-panda-es 1 min 3.1 sec: PASS legacy,3730storm 0 min 23.0 sec: PASS legacy,3530overo 0 min 24.2 sec: PASS (Warnings: 1) arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 19.1 sec: PASS imx6dl-wandboard,wand-solo 0 min 19.1 sec: PASS imx6q-wandboard 0 min 17.3 sec: PASS arm-multi_v7_defconfig ---------------------- qcom-apq8074-dragonboard 0 min 16.8 sec: PASS ste-snowball 1 min 25.4 sec: PASS tegra30-beaver 0 min 25.2 sec: PASS am335x-boneblack 0 min 37.8 sec: PASS omap3-beagle-xm 0 min 54.9 sec: PASS sun7i-a20-cubieboard2 0 min 12.3 sec: PASS armada-370-mirabox 0 min 22.5 sec: PASS omap4-panda 0 min 57.8 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.4 sec: PASS sun4i-a10-cubieboard 0 min 19.0 sec: PASS bcm28155-ap 0 min 26.6 sec: PASS omap3-overo-tobi 0 min 22.3 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.1 sec: PASS am335x-bone 0 min 26.8 sec: PASS omap3-overo-storm-tobi 0 min 24.2 sec: PASS omap5-uevm 1 min 36.9 sec: PASS (Warnings: 1) omap3-n900 0 min 15.9 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 17.3 sec: PASS omap4-panda-es 0 min 51.9 sec: PASS imx6dl-wandboard,wand-dual 0 min 17.9 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 22.8 sec: PASS sun4i-a10-cubieboard 0 min 12.8 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 24.1 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 32.2 sec: PASS exynos5250-arndale 0 min 31.1 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 0 min 56.8 sec: FAIL arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.8 sec: PASS armada-370-mirabox 0 min 20.6 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 17.3 sec: PASS Console logs for failures ========================= arm-u8500_defconfig ------------------- ste-snowball: FAIL: last 80 lines of boot log: ---------------------------------------------- U-Boot 2009.11 (sept. 19 2011 - 17:03:11) CPU: ST-Ericsson db8500 v2 (Dual ARM Cortex A9) 998.400 Mhz I2C: ready DRAM: 1 GB MMC: MCDE: startup failed sec_bridge: ISSWAPI_FLUSH_BOOT_CODE: 2 EMMC: 0, MMC: 1 In: serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 1 0 U8500 $ U8500 $ version version U-Boot 2009.11 (sept. 19 2011 - 17:03:11) U8500 $ setenv ethaddr 6e:e6:84:36:8e:9e setenv ethaddr 6e:e6:84:36:8e:9e Can't overwrite "ethaddr" U8500 $setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 U8500 $ setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' U8500 $ if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi U8500 $ if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U8500 $ setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U8500 $ dhcp dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.159 U8500 $ setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U8500 $ if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U8500 $ tftp 0x00800000 192.168.1.2:tmp/snowball-rVnrnH/tmpYGFuNk-uImage tftp 0x00800000 192.168.1.2:tmp/snowball-rVnrnH/tmpYGFuNk-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'tmp/snowball-rVnrnH/tmpYGFuNk-uImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ##################T ############ done Bytes transferred = 3289297 (3230d1 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 U8500 $ bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3289233 Bytes = 3.1 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 56.76 seconds. # PYBOOT: Result: FAIL

10 years

next build: 260 warnings 9 failures (next/next-20140502)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next, found at: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch) Topmost commit: b5c8d48 Add linux-next specific files for 20140502 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next/next-20140502/ Runtime: 43m 9s Passed: 115 Failed: 9 Warnings: 260 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: ape6evm_defconfig armadillo800eva_defconfig bockw_defconfig genmai_defconfig koelsch_defconfig kzm9g_defconfig lager_defconfig mackerel_defconfig marzen_defconfig ------------------------------------------------------------------------------- Errors: ape6evm_defconfig: :(.text+0x62e30): undefined reference to `cpufreq_next_valid' :(.text+0x63568): undefined reference to `cpufreq_next_valid' armadillo800eva_defconfig: :(.text+0xe4874): undefined reference to `cpufreq_next_valid' :(.text+0xe4fb0): undefined reference to `cpufreq_next_valid' bockw_defconfig: :(.text+0xcfa50): undefined reference to `cpufreq_next_valid' :(.text+0xd017c): undefined reference to `cpufreq_next_valid' genmai_defconfig: :(.text+0x9b078): undefined reference to `cpufreq_next_valid' :(.text+0x9b728): undefined reference to `cpufreq_next_valid' koelsch_defconfig: :(.text+0xa5014): undefined reference to `cpufreq_next_valid' :(.text+0xa5764): undefined reference to `cpufreq_next_valid' kzm9g_defconfig: :(.text+0xc6e70): undefined reference to `cpufreq_next_valid' :(.text+0xc75ec): undefined reference to `cpufreq_next_valid' lager_defconfig: :(.text+0xeed58): undefined reference to `cpufreq_next_valid' :(.text+0xef408): undefined reference to `cpufreq_next_valid' mackerel_defconfig: :(.text+0xd6074): undefined reference to `cpufreq_next_valid' :(.text+0xd681c): undefined reference to `cpufreq_next_valid' marzen_defconfig: drivers/sh/clk/core.c:201: undefined reference to `cpufreq_next_valid' drivers/sh/clk/core.c:572: undefined reference to `cpufreq_next_valid' Warnings: 1 arch/arm/mach-exynos/exynos.c:259:6: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 1 drivers/irqchip/irq-clps711x.c:78:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 1 drivers/pci/host/pci-mvebu.c:334:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 6 include/linux/bitops.h:48) [-Wdeprecated-declarations] 12 sound/soc/soc-core.c:1671:3: warning: passing argument 1 of 'of_node_full_name' discards 'const' qualifier from pointer target type [enabled by default] 12 sound/soc/soc-core.c:1686:4: warning: passing argument 1 of 'of_node_full_name' discards 'const' qualifier from pointer target type [enabled by default] 111 fs/direct-io.c:1011:12: warning: 'from' may be used uninitialized in this function [-Wmaybe-uninitialized] 111 fs/direct-io.c:1011:12: warning: 'to' may be used uninitialized in this function [-Wmaybe-uninitialized] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1ba0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

10 years

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports May 2014