Kernel-build-reports June 2014

kernel-build-reports@lists.linaro.org

17 participants
388 discussions

mainline boot: 64 boots: 63 pass, 1 fail (v3.16-rc1-112-g894e552)

by Kevin's boot bot

Tree/Branch: mainline Git describe: v3.16-rc1-112-g894e552 Failed boot tests (console logs at the end) =========================================== ste-snowball: FAIL: arm-u8500_defconfig Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.8 sec: PASS da850-evm 0 min 15.7 sec: PASS arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 18.0 sec: PASS tegra30-beaver 0 min 24.0 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 18.0 sec: PASS armada-xp-openblocks-ax3-4 0 min 24.9 sec: PASS omap5-uevm 1 min 42.1 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 13.2 sec: PASS arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 24.3 sec: PASS armada-370-mirabox 0 min 26.0 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 40.6 sec: PASS am335x-boneblack 0 min 22.7 sec: PASS omap3-beagle-xm 0 min 48.6 sec: PASS legacy,3530beagle 0 min 27.6 sec: PASS (Warnings: 1) omap4-panda 0 min 57.1 sec: PASS (Warnings: 1) omap3-overo-tobi 0 min 23.4 sec: PASS am335x-bone 0 min 24.5 sec: PASS omap3-overo-storm-tobi 0 min 25.4 sec: PASS omap5-uevm 0 min 56.3 sec: PASS (Warnings: 1) omap3-n900 0 min 18.1 sec: PASS legacy,n900 0 min 17.1 sec: PASS (Warnings: 1) omap4-panda-es 0 min 52.7 sec: PASS (Warnings: 1) legacy,3730storm 0 min 23.0 sec: PASS legacy,3530overo 0 min 21.4 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 15.5 sec: PASS am335x-boneblack 0 min 22.5 sec: PASS sun7i-a20-cubieboard2 0 min 13.2 sec: PASS sun4i-a10-cubieboard 0 min 17.5 sec: PASS exynos5410-smdk5410 0 min 29.1 sec: PASS am335x-bone 0 min 24.2 sec: PASS tegra124-jetson-tk1 0 min 17.8 sec: PASS armada-370-mirabox 0 min 22.2 sec: PASS omap4-panda 0 min 51.0 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 14.0 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.6 sec: PASS ste-snowball 1 min 12.0 sec: PASS tegra30-beaver 0 min 22.1 sec: PASS omap3-n900 0 min 20.1 sec: PASS qcom-apq8074-dragonboard 0 min 25.6 sec: PASS bcm28155-ap 0 min 27.4 sec: PASS omap3-overo-tobi 0 min 26.4 sec: PASS omap3-overo-storm-tobi 0 min 25.7 sec: PASS omap3-beagle-xm 0 min 56.5 sec: PASS exynos5420-arndale-octa 0 min 40.4 sec: PASS armada-xp-openblocks-ax3-4 0 min 29.2 sec: PASS omap5-uevm 1 min 39.6 sec: PASS (Warnings: 1) omap4-panda-es 0 min 57.3 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 36.8 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 12.0 sec: PASS sun4i-a10-cubieboard 0 min 14.8 sec: PASS arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard 0 min 17.2 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 22.7 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 38.9 sec: PASS exynos5250-arndale 0 min 30.1 sec: PASS exynos5410-smdk5410 0 min 27.6 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 16.1 sec: PASS imx6dl-wandboard,wand-solo 0 min 16.1 sec: PASS imx6q-wandboard 0 min 14.3 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 1 min 50.6 sec: FAIL arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 27.4 sec: PASS armada-370-mirabox 0 min 23.1 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.3 sec: PASS armada-370-mirabox 0 min 20.2 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 15.8 sec: PASS (Warnings: 1) Console logs for failures ========================= arm-u8500_defconfig ------------------- ste-snowball: FAIL: last 40 lines of boot log: ---------------------------------------------- [ 3.493377] musb-hdrc musb-hdrc.20.auto: musb_init_controller failed with status -517 [ 3.501251] platform musb-hdrc.20.auto: Driver musb-hdrc requests probe deferral [ 3.509155] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.20.auto [ 3.521087] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.20.auto) status -22 [ 3.528381] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.539886] musb-ux500 musb-hdrc.20.auto: Error applying setting, reverse things back [ 3.548431] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.560363] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.567687] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.579162] musb-hdrc musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.586975] HS USB OTG: no transceiver configured [ 3.591705] musb-hdrc musb-hdrc.21.auto: musb_init_controller failed with status -517 [ 3.599548] platform musb-hdrc.21.auto: Driver musb-hdrc requests probe deferral [ 3.607452] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.619384] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.626708] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.638183] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.646728] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.658630] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.665954] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.677429] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.685272] HS USB OTG: no transceiver configured [ 3.689971] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.697814] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.705749] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.717681] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.725006] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.736480] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.744995] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.756927] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.764251] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.775726] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.783538] HS USB OTG: no transceiver configured [ 3.788238] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.796112] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.804016] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 110.62 seconds. # PYBOOT: Result: FAIL

10 years, 6 months

mainline boot: 64 boots: 63 pass, 1 fail (v3.16-rc1-110-g3d09c62)

by Kevin's boot bot

Tree/Branch: mainline Git describe: v3.16-rc1-110-g3d09c62 Failed boot tests (console logs at the end) =========================================== ste-snowball: FAIL: arm-u8500_defconfig Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.5 sec: PASS da850-evm 0 min 15.3 sec: PASS arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 17.7 sec: PASS tegra30-beaver 0 min 17.6 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 17.7 sec: PASS armada-xp-openblocks-ax3-4 0 min 24.1 sec: PASS omap5-uevm 1 min 39.3 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 13.0 sec: PASS arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 23.7 sec: PASS armada-370-mirabox 0 min 20.6 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 38.5 sec: PASS am335x-boneblack 0 min 22.3 sec: PASS omap3-beagle-xm 0 min 53.5 sec: PASS legacy,3530beagle 0 min 23.4 sec: PASS (Warnings: 1) omap4-panda 0 min 53.0 sec: PASS (Warnings: 1) omap3-overo-tobi 0 min 22.9 sec: PASS am335x-bone 0 min 24.0 sec: PASS omap3-overo-storm-tobi 0 min 25.0 sec: PASS omap5-uevm 0 min 53.0 sec: PASS (Warnings: 1) omap3-n900 0 min 17.4 sec: PASS legacy,n900 0 min 16.7 sec: PASS (Warnings: 1) omap4-panda-es 0 min 56.9 sec: PASS (Warnings: 1) legacy,3730storm 0 min 23.2 sec: PASS legacy,3530overo 0 min 21.5 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 15.3 sec: PASS am335x-boneblack 0 min 22.0 sec: PASS sun7i-a20-cubieboard2 0 min 12.9 sec: PASS sun4i-a10-cubieboard 0 min 17.6 sec: PASS exynos5410-smdk5410 0 min 28.7 sec: PASS am335x-bone 0 min 23.7 sec: PASS tegra124-jetson-tk1 0 min 17.5 sec: PASS armada-370-mirabox 0 min 22.1 sec: PASS omap4-panda 0 min 56.4 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 13.8 sec: PASS imx6dl-wandboard,wand-dual 0 min 15.3 sec: PASS ste-snowball 1 min 14.5 sec: PASS tegra30-beaver 0 min 21.4 sec: PASS omap3-n900 0 min 16.2 sec: PASS qcom-apq8074-dragonboard 0 min 19.3 sec: PASS bcm28155-ap 0 min 25.6 sec: PASS omap3-overo-tobi 0 min 22.2 sec: PASS omap3-overo-storm-tobi 0 min 24.3 sec: PASS omap3-beagle-xm 0 min 48.0 sec: PASS exynos5420-arndale-octa 0 min 39.9 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.0 sec: PASS omap5-uevm 1 min 39.6 sec: PASS (Warnings: 1) omap4-panda-es 0 min 56.3 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 31.1 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 11.9 sec: PASS sun4i-a10-cubieboard 0 min 11.6 sec: PASS arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard 0 min 18.5 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 22.0 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 39.2 sec: PASS exynos5250-arndale 0 min 30.3 sec: PASS exynos5410-smdk5410 0 min 27.4 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 15.8 sec: PASS imx6dl-wandboard,wand-solo 0 min 17.7 sec: PASS imx6q-wandboard 0 min 26.1 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 1 min 53.9 sec: FAIL arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 27.0 sec: PASS armada-370-mirabox 0 min 22.5 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.7 sec: PASS armada-370-mirabox 0 min 20.6 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 25.6 sec: PASS (Warnings: 1) Console logs for failures ========================= arm-u8500_defconfig ------------------- ste-snowball: FAIL: last 40 lines of boot log: ---------------------------------------------- [ 3.513092] platform musb-hdrc.20.auto: Driver musb-hdrc requests probe deferral [ 3.521057] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.20.auto [ 3.532989] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.20.auto) status -22 [ 3.540283] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.551757] musb-ux500 musb-hdrc.20.auto: Error applying setting, reverse things back [ 3.560363] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.572296] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.579589] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.591064] musb-hdrc musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.598876] HS USB OTG: no transceiver configured [ 3.603607] musb-hdrc musb-hdrc.21.auto: musb_init_controller failed with status -517 [ 3.611450] platform musb-hdrc.21.auto: Driver musb-hdrc requests probe deferral [ 3.619384] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.631286] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.638610] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.650085] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.658660] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.670593] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.677917] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.689392] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.697204] HS USB OTG: no transceiver configured [ 3.701934] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.709777] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.717712] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.729644] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.736968] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.748443] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.757049] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.768951] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.776275] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.787780] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.795593] HS USB OTG: no transceiver configured [ 3.800292] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.808135] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.816101] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.828033] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 113.90 seconds. # PYBOOT: Result: FAIL

10 years, 6 months

mainline boot: 27 passed 13 failed (mainline/v3.16-rc1-112-g894e552)

by Olof's autobooter

Failed boards: beaver multi_v7_defconfig : FAILED 1:27.39 capri bcm_defconfig : FAILED 1:23.83 capri multi_v7_defconfig : FAILED 1:25.28 cubox multi_v7_defconfig : FAILED 1:34.09 dalmore multi_v7_defconfig : FAILED 1:33.19 dalmore multi_lpae_defconfig : FAILED 1:31.16 hummingboard multi_v7_defconfig : FAILED 1:27.61 jetson multi_v7_defconfig : FAILED 1:28.59 jetson multi_lpae_defconfig : FAILED 1:26.41 seaboard multi_v7_defconfig : FAILED 0:39.31 snow multi_v7_defconfig : FAILED 1:13.79 snowball u8500_defconfig : FAILED 1:48.11 wandboard multi_v7_defconfig : FAILED 1:34.44 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:14.09 arndale exynos_defconfig : passed 1:15.03 arndale multi_v7_defconfig : passed 1:29.45 arndale multi_lpae_defconfig : passed 1:20.49 bbb omap2plus_defconfig : passed 1:30.29 bbb multi_v7_defconfig : passed 1:22.38 cubie sunxi_defconfig : passed 1:19.18 cubie multi_v7_defconfig : warnings 1:24.22 cubie2 sunxi_defconfig : passed 1:23.89 cubie2 multi_v7_defconfig : passed 1:29.20 cubie2 multi_lpae_defconfig : passed 1:23.41 dalmore tegra_defconfig : passed 1:26.63 hummingboard imx_v6_v7_defconfig : passed 1:13.77 jetson tegra_defconfig : passed 1:00.44 omap5uevm omap2plus_defconfig : warnings 1:01.93 omap5uevm multi_v7_defconfig : warnings 2:02.83 omap5uevm multi_lpae_defconfig : warnings 1:59.19 panda omap2plus_defconfig : warnings 1:33.14 panda multi_v7_defconfig : warnings 1:42.54 sama5 sama5_defconfig : warnings 2:01.93 seaboard tegra_defconfig : passed 1:12.49 snow exynos_defconfig : passed 1:29.56 snow multi_lpae_defconfig : passed 1:25.33 snowball multi_v7_defconfig : passed 3:26.21 trimslice tegra_defconfig : passed 1:24.31 trimslice multi_v7_defconfig : passed 1:14.16 wandboard imx_v6_v7_defconfig : passed 1:00.14 Offline boards: beaver tegra_defconfig : OFFLINE 0:37.97 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board beaver-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.567030] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.573123] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.578086] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 3.584175] pci 0000:00:01.0: bridge window [mem 0x28000000-0x280fffff 64bit pref] [ 3.591925] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.599044] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.604638] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.611020] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf001e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 472 [ 3.621015] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.631478] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.638107] [drm] No driver support for vblank timestamp query. [ 3.644057] host1x drm: No connectors reported connected with modes [ 3.650322] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.674808] Console: switching to colour frame buffer device 128x48 [ 3.686528] host1x drm: fb0: frame buffer device [ 3.691224] host1x drm: registered panic notifier [ 3.708618] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.714896] platform 7d004000.usb: Driver tegra-ehci requests probe deferral [ 3.722348] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.733836] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.739243] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.747057] tegra-ehci 7d004000.usb: irq 53, io mem 0x7d004000 [ 3.758224] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.764589] hub 1-0:1.0: USB hub found [ 3.768366] hub 1-0:1.0: 1 port detected [ 3.772739] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.778153] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.785900] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.798606] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.804913] hub 2-0:1.0: USB hub found [ 3.808684] hub 2-0:1.0: 1 port detected [ 3.816632] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.829460] usb1_vbus: disabling [ 3.832860] ALSA device list: [ 3.835859] #0: NVIDIA Tegra Beaver [ 3.840102] Waiting for root device /dev/mmcblk0p1... [ 4.118631] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.587393] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-bcm_defconfig failure log: ------------------------------------------------- [ 0.460000] iosr1: 1800 mV [ 0.460000] iosr2: at 1800 mV [ 0.470000] msr: at 1120 mV [ 0.470000] sdsr1: at 1240 mV [ 0.470000] sdsr2: at 1240 mV [ 0.480000] vsr: at 1240 mV [ 0.480000] gpldo1: at 1200 mV [ 0.480000] gpldo2: at 3300 mV [ 0.490000] gpldo3: at 1200 mV [ 0.490000] gpldo4: at 1800 mV [ 0.490000] gpldo5: at 1200 mV [ 0.500000] gpldo6: at 3300 mV [ 0.500000] : no parameters [ 0.500000] : Failed to create debugfs directory [ 0.510000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.510000] sdhci: Secure Digital Host Controller Interface driver [ 0.520000] sdhci: Copyright(c) Pierre Ossman [ 0.520000] TCP: cubic registered [ 0.520000] NET: Registered protocol family 10 [ 0.530000] sit: IPv6 over IPv4 tunneling driver [ 0.530000] NET: Registered protocol family 17 [ 0.530000] NET: Registered protocol family 15 [ 0.540000] ThumbEE CPU extension supported. [ 0.540000] gpldo6: disabling [ 0.550000] gpldo5: disabling [ 0.550000] gpldo4: disabling [ 0.550000] gpldo3: disabling [ 0.560000] gpldo2: disabling [ 0.560000] gpldo1: disabling [ 0.560000] vsr: disabling [ 0.570000] sdsr2: disabling [ 0.570000] sdsr1: disabling [ 0.570000] msr: disabling [ 0.580000] iosr2: disabling [ 0.580000] csr: disabling [ 0.580000] mmcldo2: disabling [ 0.590000] mmcldo1: disabling [ 0.590000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.545000] ehci-omap: OMAP-EHCI Host Controller driver [ 0.550000] ehci-orion: EHCI orion driver [ 0.550000] SPEAr-ehci: EHCI SPEAr driver [ 0.555000] tegra-ehci: Tegra EHCI driver [ 0.555000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.560000] ohci-pci: OHCI PCI platform driver [ 0.560000] ohci-platform: OHCI generic platform driver [ 0.565000] ohci-omap3: OHCI OMAP3 driver [ 0.565000] SPEAr-ohci: OHCI SPEAr driver [ 0.570000] usbcore: registered new interface driver usb-storage [ 0.575000] mousedev: PS/2 mouse device common for all mice [ 0.580000] i2c /dev entries driver [ 0.585000] bcm-kona-i2c 3e016000.i2c: device registered successfully [ 0.590000] bcm-kona-i2c 3e017000.i2c: device registered successfully [ 0.595000] bcm-kona-i2c 3e018000.i2c: device registered successfully [ 0.600000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.605000] usbcore: registered new interface driver uvcvideo [ 0.610000] USB Video Class driver (1.1.1) [ 0.610000] gspca_main: v2.14.0 registered [ 0.615000] sdhci: Secure Digital Host Controller Interface driver [ 0.620000] sdhci: Copyright(c) Pierre Ossman [ 0.620000] Synopsys Designware Multimedia Card Interface Driver [ 0.625000] usbcore: registered new interface driver usbhid [ 0.630000] usbhid: USB HID core driver [ 0.635000] TCP: cubic registered [ 0.635000] NET: Registered protocol family 17 [ 0.640000] can: controller area network core (rev 20120528 abi 9) [ 0.645000] NET: Registered protocol family 29 [ 0.645000] can: raw protocol (rev 20120528) [ 0.650000] can: broadcast manager protocol (rev 20120528 t) [ 0.655000] can: netlink gateway (rev 20130117) max_hops=1 [ 0.660000] Key type dns_resolver registered [ 0.660000] ThumbEE CPU extension supported. [ 0.665000] Registering SWP/SWPB emulation handler [ 0.670000] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.675000] ALSA device list: [ 0.675000] No soundcards found. [ 0.680000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubox-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.226083] hub 2-0:1.0: 1 port detected [ 1.230460] SPEAr-ehci: EHCI SPEAr driver [ 1.234569] tegra-ehci: Tegra EHCI driver [ 1.238701] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.244889] ohci-pci: OHCI PCI platform driver [ 1.249395] ohci-platform: OHCI generic platform driver [ 1.254708] ohci-omap3: OHCI OMAP3 driver [ 1.258808] SPEAr-ohci: OHCI SPEAr driver [ 1.263552] usbcore: registered new interface driver usb-storage [ 1.271106] mousedev: PS/2 mouse device common for all mice [ 1.278122] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.287438] i2c /dev entries driver [ 1.292896] usbcore: registered new interface driver uvcvideo [ 1.298643] USB Video Class driver (1.1.1) [ 1.302738] gspca_main: v2.14.0 registered [ 1.309983] orion_wdt: Initial timeout 25 sec [ 1.315490] sdhci: Secure Digital Host Controller Interface driver [ 1.321653] sdhci: Copyright(c) Pierre Ossman [ 1.326565] Synopsys Designware Multimedia Card Interface Driver [ 1.333252] usbcore: registered new interface driver usbhid [ 1.338813] usbhid: USB HID core driver [ 1.346700] TCP: cubic registered [ 1.350011] NET: Registered protocol family 17 [ 1.354482] can: controller area network core (rev 20120528 abi 9) [ 1.360724] NET: Registered protocol family 29 [ 1.365171] can: raw protocol (rev 20120528) [ 1.369422] can: broadcast manager protocol (rev 20120528 t) [ 1.375072] can: netlink gateway (rev 20130117) max_hops=1 [ 1.380947] Key type dns_resolver registered [ 1.385421] ThumbEE CPU extension supported. [ 1.389689] Registering SWP/SWPB emulation handler [ 1.394480] PJ4 iWMMXt v2 coprocessor enabled. [ 1.399184] ata1: SATA link down (SStatus 0 SControl F300) [ 1.405670] USB Power: 5000 mV [ 1.409197] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-06-19 19:39:15 UTC (1403206755) [ 1.419710] ALSA device list: [ 1.422686] No soundcards found. [ 1.426607] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.975271] i2c 0-004c: Driver lm90 requests probe deferral [ 2.982768] tegra-dsi 54300000.dsi: cannot get VDD supply [ 2.988374] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 2.998344] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.004806] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.015151] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.020797] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.030875] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.046651] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.056210] hub 1-0:1.0: USB hub found [ 3.060222] hub 1-0:1.0: 1 port detected [ 3.066719] i2c 0-004c: Driver lm90 requests probe deferral [ 3.074302] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.079932] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.089994] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.096554] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.108660] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.116957] i2c 0-004c: Driver lm90 requests probe deferral [ 3.122653] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.161727] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.161743] VDD_5V0_HDMI_CON: disabling [ 3.161775] vdd_cam_1v8_reg: disabling [ 3.162242] vdd_hdmi_5v0: disabling [ 3.162259] usb1_vbus: disabling [ 3.162277] dvdd_ts: disabling [ 3.166579] ALSA device list: [ 3.166598] #0: NVIDIA Tegra Dalmore [ 3.191795] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.194915] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.195156] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.215675] Waiting for root device /dev/mmcblk0p1... [ 3.371945] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.855459] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 3.866994] i2c 0-004c: Driver lm90 requests probe deferral [ 3.874635] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.880250] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.890194] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.896672] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.960544] i2c 0-004c: Driver lm90 requests probe deferral [ 2.968060] tegra-dsi 54300000.dsi: cannot get VDD supply [ 2.973672] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 2.983630] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.990141] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.000674] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.006315] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.015584] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.031878] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.041126] hub 1-0:1.0: USB hub found [ 3.045129] hub 1-0:1.0: 1 port detected [ 3.051400] i2c 0-004c: Driver lm90 requests probe deferral [ 3.058940] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.064587] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.074603] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.081115] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.093145] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.101432] i2c 0-004c: Driver lm90 requests probe deferral [ 3.107132] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.145368] VDD_5V0_HDMI_CON: disabling [ 3.149394] vdd_cam_1v8_reg: disabling [ 3.153641] vdd_hdmi_5v0: disabling [ 3.157312] usb1_vbus: disabling [ 3.160575] dvdd_ts: disabling [ 3.168115] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.168801] ALSA device list: [ 3.168817] #0: NVIDIA Tegra Dalmore [ 3.180577] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.183593] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.183839] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.203459] Waiting for root device /dev/mmcblk0p1... [ 3.362122] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.845668] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 3.857191] i2c 0-004c: Driver lm90 requests probe deferral [ 3.864704] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.870339] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.880178] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.886665] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board hummingboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.031663] usbcore: registered new interface driver usb-storage [ 1.042829] ci_hdrc ci_hdrc.0: doesn't support gadget [ 1.048044] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 1.052986] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 1.065401] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 1.071595] hub 1-0:1.0: USB hub found [ 1.075409] hub 1-0:1.0: 1 port detected [ 1.083092] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.088201] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.093128] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 1.105412] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.111572] hub 2-0:1.0: USB hub found [ 1.115405] hub 2-0:1.0: 1 port detected [ 1.120147] mousedev: PS/2 mouse device common for all mice [ 1.128384] i2c /dev entries driver [ 1.133084] usbcore: registered new interface driver uvcvideo [ 1.138863] USB Video Class driver (1.1.1) [ 1.142984] gspca_main: v2.14.0 registered [ 1.149736] sdhci: Secure Digital Host Controller Interface driver [ 1.155951] sdhci: Copyright(c) Pierre Ossman [ 1.161151] Synopsys Designware Multimedia Card Interface Driver [ 1.168097] usbcore: registered new interface driver usbhid [ 1.173699] usbhid: USB HID core driver [ 1.182425] TCP: cubic registered [ 1.185791] NET: Registered protocol family 17 [ 1.190262] can: controller area network core (rev 20120528 abi 9) [ 1.196521] NET: Registered protocol family 29 [ 1.200996] can: raw protocol (rev 20120528) [ 1.205278] can: broadcast manager protocol (rev 20120528 t) [ 1.210972] can: netlink gateway (rev 20130117) max_hops=1 [ 1.216869] Key type dns_resolver registered [ 1.221325] ThumbEE CPU extension supported. [ 1.225641] Registering SWP/SWPB emulation handler [ 1.231609] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.246730] ALSA device list: [ 1.249714] No soundcards found. [ 1.253826] Waiting for root device /dev/mmcblk0p2... [ 60.320525] imx-sdma 20ec000.sdma: firmware not found ~$off # PYBOOT: Exception: timeout ======================================================================== Board jetson-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.253770] hub 1-0:1.0: USB hub found [ 2.257601] hub 1-0:1.0: 1 port detected [ 2.262621] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 2.271061] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.275614] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 2.283447] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.290102] [drm] No driver support for vblank timestamp query. [ 2.296091] host1x drm: No connectors reported connected with modes [ 2.302387] [drm] Cannot find any crtc or sizes - going 1024x768 [ 2.317465] Console: switching to colour frame buffer device 128x48 [ 2.330982] host1x drm: fb0: frame buffer device [ 2.335716] host1x drm: registered panic notifier [ 2.351987] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.358558] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.363994] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.371805] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 2.386973] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.393786] hub 2-0:1.0: USB hub found [ 2.397597] hub 2-0:1.0: 1 port detected [ 2.402707] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.410086] as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:19 UTC (949363219) [ 2.428236] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.432783] +1.8V_RUN_VPP_FUSE: disabling [ 2.437206] +2.8V_RUN_CAM_AF: disabling [ 2.441390] +3.3V_RUN_TOUCH: disabling [ 2.445509] +1.05V_RUN_CAM_REAR: disabling [ 2.449752] +VDDIO_SDMMC3: disabling [ 2.453458] +1.2V_RUN_CAM_FRONT: disabling [ 2.457681] +2.8V_RUN_CAM: disabling [ 2.461370] +1.8V_RUN_CAM: disabling [ 2.465074] +1.05V_RUN: disabling [ 2.468518] +USB0_VBUS_SW: disabling [ 2.472103] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.476975] ALSA device list: [ 2.479938] #0: NVIDIA Tegra Jetson TK1 [ 2.484567] Waiting for root device /dev/mmcblk0p1... [ 2.706959] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 3.169805] asix 2-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 68:7f:74:ba:ef:28 ~$off # PYBOOT: Exception: timeout ======================================================================== Board jetson-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.238865] hub 1-0:1.0: USB hub found [ 2.242697] hub 1-0:1.0: 1 port detected [ 2.247701] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 2.256140] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.260691] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 2.268657] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.275312] [drm] No driver support for vblank timestamp query. [ 2.281303] host1x drm: No connectors reported connected with modes [ 2.287608] [drm] Cannot find any crtc or sizes - going 1024x768 [ 2.302744] Console: switching to colour frame buffer device 128x48 [ 2.316442] host1x drm: fb0: frame buffer device [ 2.321176] host1x drm: registered panic notifier [ 2.337085] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.343650] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.349089] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.356895] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 2.372071] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.378878] hub 2-0:1.0: USB hub found [ 2.382696] hub 2-0:1.0: 1 port detected [ 2.387797] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.395161] as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:21 UTC (949363221) [ 2.413159] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.417707] +1.8V_RUN_VPP_FUSE: disabling [ 2.422124] +2.8V_RUN_CAM_AF: disabling [ 2.426307] +3.3V_RUN_TOUCH: disabling [ 2.430425] +1.05V_RUN_CAM_REAR: disabling [ 2.434670] +VDDIO_SDMMC3: disabling [ 2.438375] +1.2V_RUN_CAM_FRONT: disabling [ 2.442599] +2.8V_RUN_CAM: disabling [ 2.446288] +1.8V_RUN_CAM: disabling [ 2.449992] +1.05V_RUN: disabling [ 2.453435] +USB0_VBUS_SW: disabling [ 2.457021] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.461883] ALSA device list: [ 2.464857] #0: NVIDIA Tegra Jetson TK1 [ 2.469488] Waiting for root device /dev/mmcblk0p1... [ 2.692058] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 3.154890] asix 2-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 68:7f:74:ba:ef:28 ~$off # PYBOOT: Exception: timeout ======================================================================== Board seaboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.157189] hub 3-0:1.0: USB hub found [ 2.160982] hub 3-0:1.0: 1 port detected [ 2.165924] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.172860] tps6586x-rtc tps6586x-rtc: setting system clock to 2014-06-19 19:40:21 UTC (1403206821) [ 2.185253] vdd_1v2: disabling [ 2.188492] vdd_1v5: disabling [ 2.192409] ALSA device list: [ 2.195369] #0: NVIDIA Tegra Seaboard [ 2.199826] VFS: Cannot open root device "mmcblk0p3" or unknown-block(0,0): error -6 [ 2.207586] Please append a correct "root=" boot option; here are the available partitions: [ 2.215943] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 2.224193] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.16.0-rc1-00112-g894e552 #1 [ 2.231772] [<c02160fc>] (unwind_backtrace) from [<c0211c68>] (show_stack+0x10/0x14) [ 2.239510] [<c0211c68>] (show_stack) from [<c0811c18>] (dump_stack+0x88/0x98) [ 2.246721] [<c0811c18>] (dump_stack) from [<c080ea68>] (panic+0xa0/0x218) [ 2.253590] [<c080ea68>] (panic) from [<c0ad80b0>] (mount_block_root+0x1a0/0x230) [ 2.261061] [<c0ad80b0>] (mount_block_root) from [<c0ad8248>] (mount_root+0x108/0x110) [ 2.268963] [<c0ad8248>] (mount_root) from [<c0ad83a8>] (prepare_namespace+0x158/0x1a0) [ 2.276954] [<c0ad83a8>] (prepare_namespace) from [<c0ad7d6c>] (kernel_init_freeable+0x1cc/0x1dc) [ 2.285810] [<c0ad7d6c>] (kernel_init_freeable) from [<c080cd60>] (kernel_init+0x8/0xf0) [ 2.293886] [<c080cd60>] (kernel_init) from [<c020e7b8>] (ret_from_fork+0x14/0x3c) [ 2.301444] CPU1: stopping [ 2.304147] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.16.0-rc1-00112-g894e552 #1 [ 2.311713] [<c02160fc>] (unwind_backtrace) from [<c0211c68>] (show_stack+0x10/0x14) [ 2.319446] [<c0211c68>] (show_stack) from [<c0811c18>] (dump_stack+0x88/0x98) [ 2.326656] [<c0811c18>] (dump_stack) from [<c021490c>] (handle_IPI+0x148/0x174) [ 2.334037] [<c021490c>] (handle_IPI) from [<c0208934>] (gic_handle_irq+0x64/0x68) [ 2.341592] [<c0208934>] (gic_handle_irq) from [<c02127c0>] (__irq_svc+0x40/0x50) [ 2.349056] Exception stack(0xea087f30 to 0xea087f78) [ 2.354096] 7f20: 00000000 c0bc1fb4 c0bc1fb4 0000004c [ 2.362256] 7f40: 817a8ba0 00000000 8924a098 00000000 eafb6db0 c0c9c7a8 00000000 ea479e64 [ 2.370416] 7f60: 00000015 ea087f78 c06b3000 c06b300c 60000113 ffffffff [ 2.377023] [<c02127c0>] (__irq_svc) from [<c06b300c>] (cpuidle_enter_state+0x68/0x100) [ 2.385017] [<c06b300c>] (cpuidle_enter_state) from [<c06b4b70>] (cpuidle_enter_state_coupled+0x130/0x378) [ 2.394660] [<c06b4b70>] (cpuidle_enter_state_coupled) from [<c027f4a8>] (cpu_startup_entry+0x1ec/0x210) [ 2.404124] [<c027f4a8>] (cpu_startup_entry) from [<00208a84>] (0x208a84) [ 2.410896] drm_kms_helper: panic occurred, switching back to text console [ 2.417777] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) ~$off # PYBOOT: Exception: panic ======================================================================== Board snow-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0ad619c (9017 kB) [ 0.000000] .init : 0xc0ad7000 - 0xc0b7c100 ( 661 kB) [ 0.000000] .data : 0xc0b7e000 - 0xc0c5c740 ( 890 kB) [ 0.000000] .bss : 0xc0c5c748 - 0xc0ca8788 ( 305 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: failed to init: -19 [ 0.000000] Exynos5250: clock setup completed, armclk=1700000000 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000002] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 0.000006] Switching to timer-based delay loop [ 2889.654054] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 2889.654603] Console: colour dummy device 80x30 [ 2889.654614] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 2889.654622] pid_max: default: 32768 minimum: 301 [ 2889.654682] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.654688] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.654958] CPU: Testing write buffer coherency: ok [ 2889.655070] CPU0: update cpu_capacity 1024 [ 2889.655076] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 2889.655168] Setting up static identity map for 0x40817698 - 0x40817730 [ 2889.656263] CPU1: Booted secondary processor [ 2889.656297] CPU1: update cpu_capacity 1024 [ 2889.656300] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 2889.656343] Brought up 2 CPUs [ 2889.656352] SMP: Total of 2 processors activated. [ 2889.656356] CPU: All CPU(s) started in HYP mode. [ 2889.656359] CPU: Virtualization extensions available. [ 2889.656602] devtmpfs: initialized [ 2889.658499] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 2889.658695] pinctrl~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.637115] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.645019] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.656951] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.664276] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.675750] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.684265] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.696166] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.703491] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.714996] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.722808] HS USB OTG: no transceiver configured [ 3.727508] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.735351] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.743255] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.755187] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.762512] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.773986] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.782501] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.794433] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.801727] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.813232] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.821044] HS USB OTG: no transceiver configured [ 3.825744] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.833587] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.841522] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.853424] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.860748] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.872222] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.880767] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.892669] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.899993] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.911468] musb-hdrc musb-hdrc.25.auto: Error applying setting, reverse things back [ 3.919281] HS USB OTG: no transceiver configured [ 3.923980] musb-hdrc musb-hdrc.25.auto: musb_init_controller failed with status -517 [ 3.931854] platform musb-hdrc.25.auto: Driver musb-hdrc requests probe deferral [ 3.939758] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.951690] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.958984] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.970458] musb-ux500 musb-hdrc.25.auto: Error applying setting, reverse things back ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.070077] ohci-platform: OHCI generic platform driver [ 1.075461] ohci-omap3: OHCI OMAP3 driver [ 1.079623] SPEAr-ohci: OHCI SPEAr driver [ 1.084468] usbcore: registered new interface driver usb-storage [ 1.095478] ci_hdrc ci_hdrc.0: doesn't support gadget [ 1.100556] ci_hdrc ci_hdrc.0: no supported roles [ 1.105388] 2184200.usb supply vbus not found, using dummy regulator [ 1.115484] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.120571] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.125491] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 1.137787] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.143984] hub 1-0:1.0: USB hub found [ 1.147808] hub 1-0:1.0: 1 port detected [ 1.152509] mousedev: PS/2 mouse device common for all mice [ 1.160615] i2c /dev entries driver [ 1.165256] usbcore: registered new interface driver uvcvideo [ 1.171034] USB Video Class driver (1.1.1) [ 1.175156] gspca_main: v2.14.0 registered [ 1.181831] sdhci: Secure Digital Host Controller Interface driver [ 1.188037] sdhci: Copyright(c) Pierre Ossman [ 1.193240] Synopsys Designware Multimedia Card Interface Driver [ 1.200155] usbcore: registered new interface driver usbhid [ 1.205753] usbhid: USB HID core driver [ 1.214105] TCP: cubic registered [ 1.217443] NET: Registered protocol family 17 [ 1.221938] can: controller area network core (rev 20120528 abi 9) [ 1.228198] NET: Registered protocol family 29 [ 1.232658] can: raw protocol (rev 20120528) [ 1.236959] can: broadcast manager protocol (rev 20120528 t) [ 1.242646] can: netlink gateway (rev 20130117) max_hops=1 [ 1.248542] Key type dns_resolver registered [ 1.253310] ThumbEE CPU extension supported. [ 1.257611] Registering SWP/SWPB emulation handler [ 1.263594] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.278813] ALSA device list: [ 1.281795] No soundcards found. [ 1.285787] Waiting for root device /dev/mmcblk0p2... [ 60.323390] imx-sdma 20ec000.sdma: firmware not found ~$off # PYBOOT: Exception: timeout

10 years, 6 months

mainline build: 247 warnings 0 failures (mainline/v3.16-rc1-112-g894e552)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 894e552 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.16-rc1-112-g894e552/ Runtime: 46m 0s Passed: 126 Failed: 0 Warnings: 247 Section mismatches: 18 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/clk/clk-efm32gg.c:81:189: warning: comparison of distinct pointer types lacks a cast [enabled by default] 1 drivers/mmc/host/sunxi-mmc.c:297:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/tty/serial/samsung.c:1229:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 2 arch/arm/mm/cache-l2x0.c:167:13: warning: 'l2x0_cache_sync' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:184:13: warning: 'l2x0_flush_all' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:194:13: warning: 'l2x0_disable' defined but not used [-Wunused-function] 2 buildall.arm.multi_v5_defconfig.log.passed:warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 && DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 3 arch/arm/mach-exynos/exynos.c:208:6: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 4 drivers/spi/spi-rspi.c:633:6: warning: unused variable 'ret' [-Wunused-variable] 113 fs/direct-io.c:1011:12: warning: 'from' may be used uninitialized in this function [-Wmaybe-uninitialized] 113 fs/direct-io.c:1011:12: warning: 'to' may be used uninitialized in this function [-Wmaybe-uninitialized] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2c4): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b84): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 msm_defconfig WARNING: drivers/built-in.o(.data+0x4994): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/built-in.o(.data+0x34ec): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x154): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: vmlinux.o(.data+0x256d4): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x3dda8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/built-in.o(.data+0x7438): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4090): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x85ea8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x3dd28): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/built-in.o(.data+0x73f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4050): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x85968): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/built-in.o(.data+0x70f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/built-in.o(.data+0x3544): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x160): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: vmlinux.o(.data+0x1d7b8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe()

10 years, 6 months

mainline boot: 27 passed 12 failed (mainline/v3.16-rc1-110-g3d09c62)

by Olof's autobooter

Failed boards: beaver multi_v7_defconfig : FAILED 1:27.58 capri bcm_defconfig : FAILED 1:26.04 capri multi_v7_defconfig : FAILED 1:28.69 cubox multi_v7_defconfig : FAILED 1:34.84 dalmore multi_v7_defconfig : FAILED 1:34.55 dalmore multi_lpae_defconfig : FAILED 1:37.37 hummingboard multi_v7_defconfig : FAILED 1:33.15 jetson multi_v7_defconfig : FAILED 1:27.96 jetson multi_lpae_defconfig : FAILED 1:25.76 seaboard multi_v7_defconfig : FAILED 0:33.27 snowball u8500_defconfig : FAILED 1:46.69 wandboard multi_v7_defconfig : FAILED 1:28.60 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:18.70 arndale exynos_defconfig : passed 1:19.09 arndale multi_v7_defconfig : passed 1:30.22 arndale multi_lpae_defconfig : passed 1:24.16 bbb multi_v7_defconfig : passed 1:18.17 beaver tegra_defconfig : passed 1:07.43 cubie sunxi_defconfig : passed 1:38.85 cubie multi_v7_defconfig : passed 1:39.54 cubie2 sunxi_defconfig : passed 1:20.36 cubie2 multi_v7_defconfig : passed 1:30.04 cubie2 multi_lpae_defconfig : passed 1:48.39 dalmore tegra_defconfig : passed 1:43.51 hummingboard imx_v6_v7_defconfig : passed 1:19.29 jetson tegra_defconfig : passed 1:04.97 omap5uevm omap2plus_defconfig : warnings 1:03.54 omap5uevm multi_v7_defconfig : warnings 2:04.05 omap5uevm multi_lpae_defconfig : warnings 1:53.19 panda omap2plus_defconfig : warnings 1:36.95 panda multi_v7_defconfig : warnings 1:51.05 sama5 sama5_defconfig : warnings 2:00.03 snow exynos_defconfig : passed 1:24.28 snow multi_v7_defconfig : passed 1:25.40 snow multi_lpae_defconfig : passed 1:22.02 snowball multi_v7_defconfig : passed 4:10.11 trimslice tegra_defconfig : passed 1:00.72 trimslice multi_v7_defconfig : passed 1:09.98 wandboard imx_v6_v7_defconfig : passed 1:10.48 Offline boards: bbb omap2plus_defconfig : OFFLINE 0:46.90 seaboard tegra_defconfig : OFFLINE 0:41.82 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board beaver-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.572006] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.578100] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.583062] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 3.589151] pci 0000:00:01.0: bridge window [mem 0x28000000-0x280fffff 64bit pref] [ 3.596904] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.604023] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.609619] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.616002] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf001e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 472 [ 3.625999] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.636473] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.643103] [drm] No driver support for vblank timestamp query. [ 3.649050] host1x drm: No connectors reported connected with modes [ 3.655315] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.679741] Console: switching to colour frame buffer device 128x48 [ 3.691467] host1x drm: fb0: frame buffer device [ 3.696163] host1x drm: registered panic notifier [ 3.713617] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.719889] platform 7d004000.usb: Driver tegra-ehci requests probe deferral [ 3.727343] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.738828] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.744234] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.752047] tegra-ehci 7d004000.usb: irq 53, io mem 0x7d004000 [ 3.763224] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.769587] hub 1-0:1.0: USB hub found [ 3.773364] hub 1-0:1.0: 1 port detected [ 3.777737] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.783150] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.790895] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.803604] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.809912] hub 2-0:1.0: USB hub found [ 3.813681] hub 2-0:1.0: 1 port detected [ 3.821645] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.834466] usb1_vbus: disabling [ 3.837868] ALSA device list: [ 3.840868] #0: NVIDIA Tegra Beaver [ 3.845104] Waiting for root device /dev/mmcblk0p1... [ 4.123633] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.592391] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-bcm_defconfig failure log: ------------------------------------------------- [ 0.460000] iosr1: 1800 mV [ 0.460000] iosr2: at 1800 mV [ 0.470000] msr: at 1120 mV [ 0.470000] sdsr1: at 1240 mV [ 0.470000] sdsr2: at 1240 mV [ 0.480000] vsr: at 1240 mV [ 0.480000] gpldo1: at 1200 mV [ 0.480000] gpldo2: at 3300 mV [ 0.490000] gpldo3: at 1200 mV [ 0.490000] gpldo4: at 1800 mV [ 0.490000] gpldo5: at 1200 mV [ 0.500000] gpldo6: at 1200 mV [ 0.500000] : no parameters [ 0.500000] : Failed to create debugfs directory [ 0.510000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.510000] sdhci: Secure Digital Host Controller Interface driver [ 0.520000] sdhci: Copyright(c) Pierre Ossman [ 0.520000] TCP: cubic registered [ 0.520000] NET: Registered protocol family 10 [ 0.530000] sit: IPv6 over IPv4 tunneling driver [ 0.530000] NET: Registered protocol family 17 [ 0.530000] NET: Registered protocol family 15 [ 0.540000] ThumbEE CPU extension supported. [ 0.540000] gpldo6: disabling [ 0.550000] gpldo5: disabling [ 0.550000] gpldo4: disabling [ 0.550000] gpldo3: disabling [ 0.560000] gpldo2: disabling [ 0.560000] gpldo1: disabling [ 0.560000] vsr: disabling [ 0.570000] sdsr2: disabling [ 0.570000] sdsr1: disabling [ 0.570000] msr: disabling [ 0.580000] iosr2: disabling [ 0.580000] csr: disabling [ 0.580000] mmcldo2: disabling [ 0.590000] mmcldo1: disabling [ 0.590000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.545000] ehci-omap: OMAP-EHCI Host Controller driver [ 0.550000] ehci-orion: EHCI orion driver [ 0.550000] SPEAr-ehci: EHCI SPEAr driver [ 0.555000] tegra-ehci: Tegra EHCI driver [ 0.555000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.560000] ohci-pci: OHCI PCI platform driver [ 0.560000] ohci-platform: OHCI generic platform driver [ 0.565000] ohci-omap3: OHCI OMAP3 driver [ 0.565000] SPEAr-ohci: OHCI SPEAr driver [ 0.570000] usbcore: registered new interface driver usb-storage [ 0.575000] mousedev: PS/2 mouse device common for all mice [ 0.580000] i2c /dev entries driver [ 0.585000] bcm-kona-i2c 3e016000.i2c: device registered successfully [ 0.590000] bcm-kona-i2c 3e017000.i2c: device registered successfully [ 0.595000] bcm-kona-i2c 3e018000.i2c: device registered successfully [ 0.600000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.605000] usbcore: registered new interface driver uvcvideo [ 0.610000] USB Video Class driver (1.1.1) [ 0.610000] gspca_main: v2.14.0 registered [ 0.615000] sdhci: Secure Digital Host Controller Interface driver [ 0.620000] sdhci: Copyright(c) Pierre Ossman [ 0.620000] Synopsys Designware Multimedia Card Interface Driver [ 0.625000] usbcore: registered new interface driver usbhid [ 0.630000] usbhid: USB HID core driver [ 0.635000] TCP: cubic registered [ 0.635000] NET: Registered protocol family 17 [ 0.640000] can: controller area network core (rev 20120528 abi 9) [ 0.645000] NET: Registered protocol family 29 [ 0.645000] can: raw protocol (rev 20120528) [ 0.650000] can: broadcast manager protocol (rev 20120528 t) [ 0.655000] can: netlink gateway (rev 20130117) max_hops=1 [ 0.660000] Key type dns_resolver registered [ 0.660000] ThumbEE CPU extension supported. [ 0.665000] Registering SWP/SWPB emulation handler [ 0.670000] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.675000] ALSA device list: [ 0.675000] No soundcards found. [ 0.680000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubox-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.226092] hub 2-0:1.0: 1 port detected [ 1.230471] SPEAr-ehci: EHCI SPEAr driver [ 1.234579] tegra-ehci: Tegra EHCI driver [ 1.238709] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.244889] ohci-pci: OHCI PCI platform driver [ 1.249398] ohci-platform: OHCI generic platform driver [ 1.254719] ohci-omap3: OHCI OMAP3 driver [ 1.258817] SPEAr-ohci: OHCI SPEAr driver [ 1.263563] usbcore: registered new interface driver usb-storage [ 1.271113] mousedev: PS/2 mouse device common for all mice [ 1.278132] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.287454] i2c /dev entries driver [ 1.292910] usbcore: registered new interface driver uvcvideo [ 1.298662] USB Video Class driver (1.1.1) [ 1.302763] gspca_main: v2.14.0 registered [ 1.310003] orion_wdt: Initial timeout 25 sec [ 1.315508] sdhci: Secure Digital Host Controller Interface driver [ 1.321669] sdhci: Copyright(c) Pierre Ossman [ 1.326582] Synopsys Designware Multimedia Card Interface Driver [ 1.333271] usbcore: registered new interface driver usbhid [ 1.338830] usbhid: USB HID core driver [ 1.346711] TCP: cubic registered [ 1.350019] NET: Registered protocol family 17 [ 1.354492] can: controller area network core (rev 20120528 abi 9) [ 1.360731] NET: Registered protocol family 29 [ 1.365157] can: raw protocol (rev 20120528) [ 1.369419] can: broadcast manager protocol (rev 20120528 t) [ 1.375073] can: netlink gateway (rev 20130117) max_hops=1 [ 1.380947] Key type dns_resolver registered [ 1.385421] ThumbEE CPU extension supported. [ 1.389689] Registering SWP/SWPB emulation handler [ 1.394480] PJ4 iWMMXt v2 coprocessor enabled. [ 1.399181] ata1: SATA link down (SStatus 0 SControl F300) [ 1.405681] USB Power: 5000 mV [ 1.409206] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-06-19 18:49:34 UTC (1403203774) [ 1.419720] ALSA device list: [ 1.422695] No soundcards found. [ 1.426618] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.975329] i2c 0-004c: Driver lm90 requests probe deferral [ 2.982822] tegra-dsi 54300000.dsi: cannot get VDD supply [ 2.988430] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 2.998406] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.004865] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.015228] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.020876] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.030961] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.046737] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.056297] hub 1-0:1.0: USB hub found [ 3.060313] hub 1-0:1.0: 1 port detected [ 3.066798] i2c 0-004c: Driver lm90 requests probe deferral [ 3.074353] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.079988] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.090043] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.096605] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.108710] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.117003] i2c 0-004c: Driver lm90 requests probe deferral [ 3.122705] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.161698] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.161782] VDD_5V0_HDMI_CON: disabling [ 3.161802] vdd_cam_1v8_reg: disabling [ 3.162229] vdd_hdmi_5v0: disabling [ 3.162244] usb1_vbus: disabling [ 3.162261] dvdd_ts: disabling [ 3.166562] ALSA device list: [ 3.166581] #0: NVIDIA Tegra Dalmore [ 3.191753] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.194879] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.195125] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.215798] Waiting for root device /dev/mmcblk0p1... [ 3.372028] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.855541] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 3.867073] i2c 0-004c: Driver lm90 requests probe deferral [ 3.874710] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.880325] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.890266] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.896745] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.965585] i2c 0-004c: Driver lm90 requests probe deferral [ 2.973073] tegra-dsi 54300000.dsi: cannot get VDD supply [ 2.978679] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 2.988632] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.995102] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.005497] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.011120] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.021123] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.037157] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.047010] hub 1-0:1.0: USB hub found [ 3.051004] hub 1-0:1.0: 1 port detected [ 3.057466] i2c 0-004c: Driver lm90 requests probe deferral [ 3.064998] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.070639] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.080681] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.087195] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.099292] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.107515] i2c 0-004c: Driver lm90 requests probe deferral [ 3.113228] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.151334] VDD_5V0_HDMI_CON: disabling [ 3.155358] vdd_cam_1v8_reg: disabling [ 3.159614] vdd_hdmi_5v0: disabling [ 3.163285] usb1_vbus: disabling [ 3.166549] dvdd_ts: disabling [ 3.174038] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.174714] ALSA device list: [ 3.174730] #0: NVIDIA Tegra Dalmore [ 3.186424] platfodsi requests probe deferral [ 3.191265] Waiting for root device /dev/mmcblk0p1... [ 3.193763] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.194001] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.367249] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.845954] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 3.858010] i2c 0-004c: Driver lm90 requests probe deferral [ 3.865443] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.871037] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.880672] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.887059] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board hummingboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.031703] usbcore: registered new interface driver usb-storage [ 1.042832] ci_hdrc ci_hdrc.0: doesn't support gadget [ 1.048046] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 1.052993] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 1.065393] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 1.071607] hub 1-0:1.0: USB hub found [ 1.075441] hub 1-0:1.0: 1 port detected [ 1.083129] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.088234] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.093160] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 1.105400] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.111555] hub 2-0:1.0: USB hub found [ 1.115358] hub 2-0:1.0: 1 port detected [ 1.120144] mousedev: PS/2 mouse device common for all mice [ 1.128389] i2c /dev entries driver [ 1.133079] usbcore: registered new interface driver uvcvideo [ 1.138859] USB Video Class driver (1.1.1) [ 1.142982] gspca_main: v2.14.0 registered [ 1.149717] sdhci: Secure Digital Host Controller Interface driver [ 1.155932] sdhci: Copyright(c) Pierre Ossman [ 1.161138] Synopsys Designware Multimedia Card Interface Driver [ 1.168085] usbcore: registered new interface driver usbhid [ 1.173687] usbhid: USB HID core driver [ 1.182383] TCP: cubic registered [ 1.185749] NET: Registered protocol family 17 [ 1.190221] can: controller area network core (rev 20120528 abi 9) [ 1.196481] NET: Registered protocol family 29 [ 1.200957] can: raw protocol (rev 20120528) [ 1.205239] can: broadcast manager protocol (rev 20120528 t) [ 1.210929] can: netlink gateway (rev 20130117) max_hops=1 [ 1.216816] Key type dns_resolver registered [ 1.221262] ThumbEE CPU extension supported. [ 1.225579] Registering SWP/SWPB emulation handler [ 1.231550] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.246718] ALSA device list: [ 1.249703] No soundcards found. [ 1.253819] Waiting for root device /dev/mmcblk0p2... [ 60.320516] imx-sdma 20ec000.sdma: firmware not found ~$off # PYBOOT: Exception: timeout ======================================================================== Board jetson-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.253821] hub 1-0:1.0: USB hub found [ 2.257652] hub 1-0:1.0: 1 port detected [ 2.262643] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 2.271093] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.275645] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 2.283494] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.290149] [drm] No driver support for vblank timestamp query. [ 2.296138] host1x drm: No connectors reported connected with modes [ 2.302434] [drm] Cannot find any crtc or sizes - going 1024x768 [ 2.317524] Console: switching to colour frame buffer device 128x48 [ 2.331033] host1x drm: fb0: frame buffer device [ 2.335766] host1x drm: registered panic notifier [ 2.352043] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.358614] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.364052] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.371885] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 2.387029] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.393838] hub 2-0:1.0: USB hub found [ 2.397649] hub 2-0:1.0: 1 port detected [ 2.402758] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.410151] as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:18 UTC (949363218) [ 2.428306] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.432854] +1.8V_RUN_VPP_FUSE: disabling [ 2.437275] +2.8V_RUN_CAM_AF: disabling [ 2.441458] +3.3V_RUN_TOUCH: disabling [ 2.445578] +1.05V_RUN_CAM_REAR: disabling [ 2.449823] +VDDIO_SDMMC3: disabling [ 2.453530] +1.2V_RUN_CAM_FRONT: disabling [ 2.457754] +2.8V_RUN_CAM: disabling [ 2.461443] +1.8V_RUN_CAM: disabling [ 2.465146] +1.05V_RUN: disabling [ 2.468589] +USB0_VBUS_SW: disabling [ 2.472174] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.477044] ALSA device list: [ 2.480007] #0: NVIDIA Tegra Jetson TK1 [ 2.484634] Waiting for root device /dev/mmcblk0p1... [ 2.707016] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 3.169595] asix 2-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 68:7f:74:ba:ef:28 ~$off # PYBOOT: Exception: timeout ======================================================================== Board jetson-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.248716] hub 1-0:1.0: USB hub found [ 2.252526] hub 1-0:1.0: 1 port detected [ 2.257644] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 2.266022] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.270566] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 2.278347] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.285002] [drm] No driver support for vblank timestamp query. [ 2.291002] host1x drm: No connectors reported connected with modes [ 2.297302] [drm] Cannot find any crtc or sizes - going 1024x768 [ 2.312249] Console: switching to colour frame buffer device 128x48 [ 2.325756] host1x drm: fb0: frame buffer device [ 2.330494] host1x drm: registered panic notifier [ 2.347043] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.353608] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.359047] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.366963] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 2.381942] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.388806] hub 2-0:1.0: USB hub found [ 2.392643] hub 2-0:1.0: 1 port detected [ 2.397914] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.405265] as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:21 UTC (949363221) [ 2.423486] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.428064] +1.8V_RUN_VPP_FUSE: disabling [ 2.432501] +2.8V_RUN_CAM_AF: disabling [ 2.436683] +3.3V_RUN_TOUCH: disabling [ 2.440803] +1.05V_RUN_CAM_REAR: disabling [ 2.445267] +VDDIO_SDMMC3: disabling [ 2.448995] +1.2V_RUN_CAM_FRONT: disabling [ 2.453431] +2.8V_RUN_CAM: disabling [ 2.457379] +1.8V_RUN_CAM: disabling [ 2.461302] +1.05V_RUN: disabling [ 2.464987] +USB0_VBUS_SW: disabling [ 2.468591] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.473467] ALSA device list: [ 2.476429] #0: NVIDIA Tegra Jetson TK1 [ 2.481059] Waiting for root device /dev/mmcblk0p1... [ 2.702020] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 3.164688] asix 2-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 68:7f:74:ba:ef:28 ~$off # PYBOOT: Exception: timeout ======================================================================== Board seaboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.120625] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 2.127257] hub 3-0:1.0: USB hub found [ 2.131060] hub 3-0:1.0: 1 port detected [ 2.136104] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.143059] tps6586x-rtc tps6586x-rtc: setting system clock to 2014-06-19 18:50:05 UTC (1403203805) [ 2.155688] vdd_1v2: disabling [ 2.158908] vdd_1v5: disabling [ 2.162843] ALSA device list: [ 2.165828] #0: NVIDIA Tegra Seaboard [ 2.170284] VFS: Cannot open root device "mmcblk0p3" or unknown-block(0,0): error -6 [ 2.178043] Please append a correct "root=" boot option; here are the available partitions: [ 2.186397] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 2.194648] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.16.0-rc1-00110-g3d09c62 #1 [ 2.202229] [<c02160fc>] (unwind_backtrace) from [<c0211c68>] (show_stack+0x10/0x14) [ 2.209969] [<c0211c68>] (show_stack) from [<c0811c18>] (dump_stack+0x88/0x98) [ 2.217181] [<c0811c18>] (dump_stack) from [<c080ea68>] (panic+0xa0/0x218) [ 2.224052] [<c080ea68>] (panic) from [<c0ad80b0>] (mount_block_root+0x1a0/0x230) [ 2.231525] [<c0ad80b0>] (mount_block_root) from [<c0ad8248>] (mount_root+0x108/0x110) [ 2.239429] [<c0ad8248>] (mount_root) from [<c0ad83a8>] (prepare_namespace+0x158/0x1a0) [ 2.247421] [<c0ad83a8>] (prepare_namespace) from [<c0ad7d6c>] (kernel_init_freeable+0x1cc/0x1dc) [ 2.256278] [<c0ad7d6c>] (kernel_init_freeable) from [<c080cd60>] (kernel_init+0x8/0xf0) [ 2.264356] [<c080cd60>] (kernel_init) from [<c020e7b8>] (ret_from_fork+0x14/0x3c) [ 2.271911] CPU1: stopping [ 2.274615] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.16.0-rc1-00110-g3d09c62 #1 [ 2.282182] [<c02160fc>] (unwind_backtrace) from [<c0211c68>] (show_stack+0x10/0x14) [ 2.289917] [<c0211c68>] (show_stack) from [<c0811c18>] (dump_stack+0x88/0x98) [ 2.297128] [<c0811c18>] (dump_stack) from [<c021490c>] (handle_IPI+0x148/0x174) [ 2.304510] [<c021490c>] (handle_IPI) from [<c0208934>] (gic_handle_irq+0x64/0x68) [ 2.312065] [<c0208934>] (gic_handle_irq) from [<c02127c0>] (__irq_svc+0x40/0x50) [ 2.319529] Exception stack(0xea087f68 to 0xea087fb0) [ 2.324570] 7f60: 00000000 c0bc1fb4 c0bc1fb4 0000004c 874d96a8 00000000 [ 2.332732] 7f80: 87619f90 00000000 eafb6db0 ea086000 00000000 c081f058 00000015 ea087fb0 [ 2.340890] 7fa0: c06b3000 c06b300c 60000113 ffffffff [ 2.345938] [<c02127c0>] (__irq_svc) from [<c06b300c>] (cpuidle_enter_state+0x68/0x100) [ 2.353936] [<c06b300c>] (cpuidle_enter_state) from [<c027f4a8>] (cpu_startup_entry+0x1ec/0x210) [ 2.362706] [<c027f4a8>] (cpu_startup_entry) from [<00208a84>] (0x208a84) [ 2.369479] drm_kms_helper: panic occurred, switching back to text console [ 2.376361] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) ~$off # PYBOOT: Exception: panic ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.536682] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.548583] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.555908] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.567382] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.575897] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.587829] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.595153] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.606628] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.614440] HS USB OTG: no transceiver configured [ 3.619140] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.626983] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.634918] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.646820] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.654144] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.665618] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.674163] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.686065] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.693389] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.704864] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.712677] HS USB OTG: no transceiver configured [ 3.717407] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.725250] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.733184] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.745086] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.752410] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.763885] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.772399] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.784332] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.791656] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.803131] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.810943] HS USB OTG: no transceiver configured [ 3.815643] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.823486] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.831420] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.843353] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.850646] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.862121] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.870635] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.070044] ohci-platform: OHCI generic platform driver [ 1.075431] ohci-omap3: OHCI OMAP3 driver [ 1.079594] SPEAr-ohci: OHCI SPEAr driver [ 1.084420] usbcore: registered new interface driver usb-storage [ 1.095443] ci_hdrc ci_hdrc.0: doesn't support gadget [ 1.100528] ci_hdrc ci_hdrc.0: no supported roles [ 1.105355] 2184200.usb supply vbus not found, using dummy regulator [ 1.115457] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.120544] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.125462] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 1.137730] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.143932] hub 1-0:1.0: USB hub found [ 1.147734] hub 1-0:1.0: 1 port detected [ 1.152468] mousedev: PS/2 mouse device common for all mice [ 1.160561] i2c /dev entries driver [ 1.165221] usbcore: registered new interface driver uvcvideo [ 1.170996] USB Video Class driver (1.1.1) [ 1.175119] gspca_main: v2.14.0 registered [ 1.181799] sdhci: Secure Digital Host Controller Interface driver [ 1.188007] sdhci: Copyright(c) Pierre Ossman [ 1.193209] Synopsys Designware Multimedia Card Interface Driver [ 1.200125] usbcore: registered new interface driver usbhid [ 1.205724] usbhid: USB HID core driver [ 1.214131] TCP: cubic registered [ 1.217468] NET: Registered protocol family 17 [ 1.221962] can: controller area network core (rev 20120528 abi 9) [ 1.228229] NET: Registered protocol family 29 [ 1.232690] can: raw protocol (rev 20120528) [ 1.236986] can: broadcast manager protocol (rev 20120528 t) [ 1.242674] can: netlink gateway (rev 20130117) max_hops=1 [ 1.248552] Key type dns_resolver registered [ 1.253326] ThumbEE CPU extension supported. [ 1.257627] Registering SWP/SWPB emulation handler [ 1.263543] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.278723] ALSA device list: [ 1.281707] No soundcards found. [ 1.285689] Waiting for root device /dev/mmcblk0p2... [ 60.322860] imx-sdma 20ec000.sdma: firmware not found ~$off # PYBOOT: Exception: timeout

10 years, 6 months

mainline build: 247 warnings 0 failures (mainline/v3.16-rc1-110-g3d09c62)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 3d09c62 Merge tag 'stable/for-linus-3.16-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.16-rc1-110-g3d09c62/ Runtime: 45m 46s Passed: 126 Failed: 0 Warnings: 247 Section mismatches: 18 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/clk/clk-efm32gg.c:81:189: warning: comparison of distinct pointer types lacks a cast [enabled by default] 1 drivers/mmc/host/sunxi-mmc.c:297:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/tty/serial/samsung.c:1229:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 2 arch/arm/mm/cache-l2x0.c:167:13: warning: 'l2x0_cache_sync' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:184:13: warning: 'l2x0_flush_all' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:194:13: warning: 'l2x0_disable' defined but not used [-Wunused-function] 2 buildall.arm.multi_v5_defconfig.log.passed:warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 && DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 3 arch/arm/mach-exynos/exynos.c:208:6: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 4 drivers/spi/spi-rspi.c:633:6: warning: unused variable 'ret' [-Wunused-variable] 113 fs/direct-io.c:1011:12: warning: 'from' may be used uninitialized in this function [-Wmaybe-uninitialized] 113 fs/direct-io.c:1011:12: warning: 'to' may be used uninitialized in this function [-Wmaybe-uninitialized] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2c4): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b84): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 msm_defconfig WARNING: drivers/built-in.o(.data+0x4994): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/built-in.o(.data+0x34ec): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x154): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: vmlinux.o(.data+0x256d4): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x3dda8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/built-in.o(.data+0x7438): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4090): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x85ea8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x3dd28): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/built-in.o(.data+0x73f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4050): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x85968): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/built-in.o(.data+0x70f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/built-in.o(.data+0x3544): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x160): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: vmlinux.o(.data+0x1d7b8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe()

10 years, 6 months

next boot: 64 boots: 62 pass, 2 fail (next-20140619)

by Kevin's boot bot

Tree/Branch: next Git describe: next-20140619 Failed boot tests (console logs at the end) =========================================== exynos5420-arndale-octa: FAIL: arm-exynos_defconfig ste-snowball: FAIL: arm-u8500_defconfig Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.1 sec: PASS da850-evm 0 min 15.0 sec: PASS arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 17.8 sec: PASS tegra30-beaver 0 min 17.4 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 17.8 sec: PASS armada-xp-openblocks-ax3-4 0 min 24.3 sec: PASS omap5-uevm 1 min 42.0 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 13.2 sec: PASS (Warnings: 1) arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 23.8 sec: PASS armada-370-mirabox 0 min 20.6 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 38.2 sec: PASS am335x-boneblack 0 min 22.4 sec: PASS omap3-beagle-xm 0 min 50.4 sec: PASS legacy,3530beagle 0 min 28.9 sec: PASS (Warnings: 1) omap4-panda 0 min 53.6 sec: PASS (Warnings: 1) omap3-overo-tobi 0 min 23.1 sec: PASS am335x-bone 0 min 28.9 sec: PASS omap3-overo-storm-tobi 0 min 24.3 sec: PASS omap5-uevm 0 min 58.7 sec: PASS (Warnings: 1) omap3-n900 0 min 17.4 sec: PASS legacy,n900 0 min 17.4 sec: PASS (Warnings: 2) omap4-panda-es 0 min 53.4 sec: PASS (Warnings: 1) legacy,3730storm 0 min 22.5 sec: PASS legacy,3530overo 0 min 21.0 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 15.4 sec: PASS (Warnings: 1) am335x-boneblack 0 min 22.1 sec: PASS sun7i-a20-cubieboard2 0 min 12.9 sec: PASS (Warnings: 1) sun4i-a10-cubieboard 0 min 20.5 sec: PASS exynos5410-smdk5410 0 min 29.1 sec: PASS (Warnings: 3) am335x-bone 0 min 28.6 sec: PASS tegra124-jetson-tk1 0 min 17.8 sec: PASS armada-370-mirabox 0 min 21.7 sec: PASS omap4-panda 0 min 54.4 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 14.0 sec: PASS imx6dl-wandboard,wand-dual 0 min 15.3 sec: PASS ste-snowball 1 min 11.7 sec: PASS tegra30-beaver 0 min 19.7 sec: PASS omap3-n900 0 min 16.5 sec: PASS qcom-apq8074-dragonboard 0 min 18.7 sec: PASS bcm28155-ap 0 min 27.4 sec: PASS omap3-overo-tobi 0 min 22.3 sec: PASS omap3-overo-storm-tobi 0 min 23.9 sec: PASS omap3-beagle-xm 0 min 54.3 sec: PASS exynos5420-arndale-octa 0 min 43.1 sec: PASS (Warnings: 7) armada-xp-openblocks-ax3-4 0 min 25.0 sec: PASS omap5-uevm 1 min 41.6 sec: PASS (Warnings: 1) omap4-panda-es 0 min 52.9 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 30.9 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 11.8 sec: PASS (Warnings: 1) sun4i-a10-cubieboard 0 min 11.6 sec: PASS arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard 0 min 18.4 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 22.7 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 38.4 sec: FAIL (Warnings: 7) exynos5250-arndale 0 min 30.2 sec: PASS exynos5410-smdk5410 0 min 27.7 sec: PASS (Warnings: 3) arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 15.4 sec: PASS imx6dl-wandboard,wand-solo 0 min 15.5 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 14.1 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 1 min 50.5 sec: FAIL arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 26.7 sec: PASS armada-370-mirabox 0 min 23.3 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.3 sec: PASS armada-370-mirabox 0 min 20.2 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 1 min 46.0 sec: PASS (Warnings: 1) Console logs for failures ========================= arm-exynos_defconfig -------------------- exynos5420-arndale-octa: FAIL: last 40 lines of boot log: --------------------------------------------------------- [ 17.201588] mmcblk0: p1 p2 p3 p4 [ 17.204756] Unhandled fault: external abort on non-linefetch (0x008) at 0xf00bc088 [ 17.212294] Internal error: : 8 [#2] PREEMPT SMP ARM [ 17.217231] Modules linked in: [ 17.220267] CPU: 0 PID: 6 Comm: kworker/u16:0 Tainted: G D W 3.16.0-rc1-next-20140619 #1 [ 17.229111] Workqueue: kmmcd mmc_rescan [ 17.232917] task: ef014000 ti: ef0b4000 task.ti: ef0b4000 [ 17.238295] PC is at rescan_partitions+0xb4/0x290 [ 17.242969] LR is at 0xf00bc000 [ 17.246089] pc : [<c01b0648>] lr : [<f00bc000>] psr: 20000113 [ 17.246089] sp : ef0b5c80 ip : 00000000 fp : 00000000 [ 17.257526] r10: 00000000 r9 : ed582400 r8 : ed4cc200 [ 17.262725] r7 : 00000000 r6 : eec24280 r5 : 00000000 r4 : 00000008 [ 17.269223] r3 : 00000013 r2 : 00000000 r1 : 00000000 r0 : 00000001 [ 17.275724] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 17.283002] Control: 10c5387d Table: 2000406a DAC: 00000015 [ 17.288721] Process kworker/u16:0 (pid: 6, stack limit = 0xef0b4240) [ 17.295047] Stack: (0xef0b5c80 to 0xef0b6000) [ 17.299382] 5c80: c054b37c 00000001 ef0b4000 c038b250 00000001 c0526578 ed717598 c0526448 [ 17.307528] 5ca0: eec24380 ed717468 eec24330 eec24280 00000000 ed717468 00000000 00000000 [ 17.315673] 5cc0: 00000000 eec24280 ed4cc200 eec24290 00000001 00000000 00000000 c00e3e04 [ 17.323818] 5ce0: c00e2804 00000000 00000000 00000001 eec24280 00000000 ed4cc270 ed4cc20c [ 17.331964] 5d00: 00000000 ed717380 00000003 c00e4068 c0528794 00000001 00000003 c038c6f0 [ 17.340109] 5d20: c0528794 c00e2d7c ef0b5d34 c0223228 ed4cc240 00000001 eec24280 ed4cc200 [ 17.348254] 5d40: ed4cc270 ed4cc20c 00000000 ed717380 00000003 c01ae560 c01ad3ac ed4cc200 [ 17.356400] 5d60: 00000080 0b300000 00000002 ef19e400 ef19d800 ef198800 ef198800 ef198abc [ 17.364546] 5d80: c02bccb4 ef19d800 ef198800 ef19d988 ef0b5dd6 c02bdbb8 00000056 ef19d86c [ 17.372691] 5da0: 00000003 ef19e400 ef19d800 c02be7e8 00000003 ef0b5dd6 00000008 ed5a0000 [ 17.380837] 5dc0: c046a178 ef198a98 00000000 34362e33 42694720 32310000 694b2038 c0000042 [ 17.388981] 5de0: 00000001 ef19d808 c058d0a8 00000000 c054b304 00000001 00000000 c054afb0 [ 17.397127] 5e00: ef013c00 c02b30fc c02b30e4 c0226ccc 00000000 ef19d808 c0226e7c ef19cc08 [ 17.405273] 5e20: 00000000 c02254a8 ef319698 ed555c44 ef19d808 ef19d83c c054aed0 c0226ba8 [ 17.413419] 5e40: ef19d808 ef19d808 c054aed0 c0226318 ef19d808 00000000 ef19d810 c0224980 [ 17.421564] 5e60: ef013c00 c03851c4 c047cddc ef0b5e84 00061a80 ef19d800 ef19d808 c047cd88 [ 17.429710] 5e80: 00061a80 c03b580c 00000000 c02b351c c047cd88 c045488c c047cd44 00000001 [ 17.437855] 5ea0: ef19cc00 00000000 ef19cc00 c02b5f84 00061a80 40ff8080 00000000 ef19cde~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Unhandled fault # PYBOOT: Time: 38.42 seconds. # PYBOOT: Warnings: 7 # PYBOOT: Result: FAIL arm-u8500_defconfig ------------------- ste-snowball: FAIL: last 40 lines of boot log: ---------------------------------------------- [ 3.503814] musb-hdrc musb-hdrc.20.auto: musb_init_controller failed with status -517 [ 3.511688] platform musb-hdrc.20.auto: Driver musb-hdrc requests probe deferral [ 3.519592] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.20.auto [ 3.531524] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.20.auto) status -22 [ 3.538818] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.550292] musb-ux500 musb-hdrc.20.auto: Error applying setting, reverse things back [ 3.558837] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.570770] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.578063] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.589569] musb-hdrc musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.597381] HS USB OTG: no transceiver configured [ 3.602081] musb-hdrc musb-hdrc.21.auto: musb_init_controller failed with status -517 [ 3.609924] platform musb-hdrc.21.auto: Driver musb-hdrc requests probe deferral [ 3.617858] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.629791] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.637115] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.648590] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.657104] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.669036] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.676361] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.687835] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.695678] HS USB OTG: no transceiver configured [ 3.700378] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.708221] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.716156] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.728088] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.735412] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.746887] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.755432] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.767333] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.774658] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.786132] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.793975] HS USB OTG: no transceiver configured [ 3.798675] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.806518] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.814453] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 110.52 seconds. # PYBOOT: Result: FAIL

10 years, 6 months

next boot: 38 passed 3 failed (next/next-20140619)

by Olof's autobooter

Failed boards: capri bcm_defconfig : FAILED 1:23.73 capri multi_v7_defconfig : FAILED 1:24.68 snowball u8500_defconfig : FAILED 1:47.68 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:14.55 arndale exynos_defconfig : passed 1:15.88 arndale multi_v7_defconfig : passed 1:32.84 arndale multi_lpae_defconfig : passed 1:28.05 bbb omap2plus_defconfig : passed 1:31.44 bbb multi_v7_defconfig : passed 1:23.55 beaver tegra_defconfig : passed 0:56.12 beaver multi_v7_defconfig : passed 1:02.81 cubie sunxi_defconfig : passed 1:18.97 cubie multi_v7_defconfig : passed 1:38.95 cubie2 sunxi_defconfig : warnings 1:06.85 cubie2 multi_v7_defconfig : warnings 1:14.06 cubie2 multi_lpae_defconfig : warnings 1:02.52 cubox multi_v7_defconfig : passed 1:07.95 dalmore tegra_defconfig : passed 1:31.62 dalmore multi_v7_defconfig : passed 1:28.08 dalmore multi_lpae_defconfig : passed 1:25.27 hummingboard imx_v6_v7_defconfig : warnings 1:43.88 hummingboard multi_v7_defconfig : warnings 1:21.93 jetson tegra_defconfig : passed 0:57.05 jetson multi_v7_defconfig : passed 1:00.36 jetson multi_lpae_defconfig : passed 1:02.34 omap5uevm omap2plus_defconfig : warnings 1:06.31 omap5uevm multi_v7_defconfig : warnings 2:15.59 omap5uevm multi_lpae_defconfig : warnings 2:03.16 panda omap2plus_defconfig : warnings 1:35.57 panda multi_v7_defconfig : warnings 2:00.06 sama5 sama5_defconfig : warnings 1:57.94 seaboard tegra_defconfig : passed 1:05.10 seaboard multi_v7_defconfig : passed 1:10.06 snow exynos_defconfig : passed 1:03.17 snow multi_v7_defconfig : passed 1:00.52 snow multi_lpae_defconfig : passed 1:00.14 snowball multi_v7_defconfig : passed 4:34.02 trimslice tegra_defconfig : passed 1:17.62 trimslice multi_v7_defconfig : passed 1:09.88 wandboard imx_v6_v7_defconfig : passed 1:14.48 wandboard multi_v7_defconfig : passed 1:22.74 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board capri-bcm_defconfig failure log: ------------------------------------------------- [ 0.460000] iosr1: 1800 mV [ 0.460000] iosr2: at 1800 mV [ 0.470000] msr: at 1120 mV [ 0.470000] sdsr1: at 1240 mV [ 0.470000] sdsr2: at 1240 mV [ 0.480000] vsr: at 1240 mV [ 0.480000] gpldo1: at 1200 mV [ 0.480000] gpldo2: at 3300 mV [ 0.490000] gpldo3: at 1200 mV [ 0.490000] gpldo4: at 1800 mV [ 0.490000] gpldo5: at 1200 mV [ 0.500000] gpldo6: at 3000 mV [ 0.500000] : no parameters [ 0.500000] : Failed to create debugfs directory [ 0.510000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.510000] sdhci: Secure Digital Host Controller Interface driver [ 0.520000] sdhci: Copyright(c) Pierre Ossman [ 0.520000] TCP: cubic registered [ 0.520000] NET: Registered protocol family 10 [ 0.530000] sit: IPv6 over IPv4 tunneling driver [ 0.530000] NET: Registered protocol family 17 [ 0.530000] NET: Registered protocol family 15 [ 0.540000] ThumbEE CPU extension supported. [ 0.540000] gpldo6: disabling [ 0.550000] gpldo5: disabling [ 0.550000] gpldo4: disabling [ 0.550000] gpldo3: disabling [ 0.560000] gpldo2: disabling [ 0.560000] gpldo1: disabling [ 0.560000] vsr: disabling [ 0.570000] sdsr2: disabling [ 0.570000] sdsr1: disabling [ 0.570000] msr: disabling [ 0.580000] iosr2: disabling [ 0.580000] csr: disabling [ 0.580000] mmcldo2: disabling [ 0.590000] mmcldo1: disabling [ 0.590000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.605000] usbcore: registered new interface driver uvcvideo [ 0.610000] USB Video Class driver (1.1.1) [ 0.610000] gspca_main: v2.14.0 registered [ 0.615000] sdhci: Secure Digital Host Controller Interface driver [ 0.620000] sdhci: Copyright(c) Pierre Ossman [ 0.620000] Synopsys Designware Multimedia Card Interface Driver [ 0.625000] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.650000] sdhci-kona 3f190000.sdio: Failed sdhci_add_host [ 0.665000] sdhci-kona 3f190000.sdio: Probing of sdhci-pltfm failed: -517 [ 0.670000] platform 3f190000.sdio: Driver sdhci-kona requests probe deferral [ 0.675000] sdhci-kona 3f1b0000.sdio: Got CD GPIO #14. [ 0.700000] sdhci-kona 3f1b0000.sdio: Failed sdhci_add_host [ 0.715000] sdhci-kona 3f1b0000.sdio: Probing of sdhci-pltfm failed: -517 [ 0.720000] platform 3f1b0000.sdio: Driver sdhci-kona requests probe deferral [ 0.725000] usbcore: registered new interface driver usbhid [ 0.730000] usbhid: USB HID core driver [ 0.735000] TCP: cubic registered [ 0.735000] NET: Registered protocol family 17 [ 0.740000] can: controller area network core (rev 20120528 abi 9) [ 0.745000] NET: Registered protocol family 29 [ 0.745000] can: raw protocol (rev 20120528) [ 0.750000] can: broadcast manager protocol (rev 20120528 t) [ 0.755000] can: netlink gateway (rev 20130117) max_hops=1 [ 0.760000] Key type dns_resolver registered [ 0.760000] ThumbEE CPU extension supported. [ 0.765000] Registering SWP/SWPB emulation handler [ 0.790000] sdhci-kona 3f190000.sdio: Failed sdhci_add_host [ 0.805000] sdhci-kona 3f190000.sdio: Probing of sdhci-pltfm failed: -517 [ 0.810000] platform 3f190000.sdio: Driver sdhci-kona requests probe deferral [ 0.815000] sdhci-kona 3f1b0000.sdio: Got CD GPIO #14. [ 0.840000] sdhci-kona 3f1b0000.sdio: Failed sdhci_add_host [ 0.855000] sdhci-kona 3f1b0000.sdio: Probing of sdhci-pltfm failed: -517 [ 0.860000] platform 3f1b0000.sdio: Driver sdhci-kona requests probe deferral [ 0.865000] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.870000] ALSA device list: [ 0.870000] No soundcards found. [ 0.875000] Waiting for root device /dev/mmcblk0p8... [ 41.280000] random: nonblocking pool is initialized ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.548828] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.560760] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.568054] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.579528] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.588104] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.600036] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.607360] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.618835] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.626647] HS USB OTG: no transceiver configured [ 3.631378] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.639221] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.647155] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.659057] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.666381] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.677856] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.686462] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.698394] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.705718] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.717193] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.725006] HS USB OTG: no transceiver configured [ 3.729705] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.737579] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.745513] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.757415] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.764739] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.776245] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.784820] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.796722] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.804046] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.815521] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.823364] HS USB OTG: no transceiver configured [ 3.828063] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.835906] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.843841] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.855773] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.863098] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.874572] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.883148] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto ~$off # PYBOOT: Exception: timeout

10 years, 6 months

next build: 536 warnings 0 failures (next/next-20140619)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next, found at: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch) Topmost commit: 07d0e2d Add linux-next specific files for 20140619 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next/next-20140619/ Runtime: 42m 30s Passed: 126 Failed: 0 Warnings: 536 Section mismatches: 16 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/mmc/host/sunxi-mmc.c:297:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/tty/serial/samsung.c:1229:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 include/linux/of.h:773:20: warning: comparison of distinct pointer types lacks a cast [enabled by default] 2 arch/arm/mm/cache-l2x0.c:167:13: warning: 'l2x0_cache_sync' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:184:13: warning: 'l2x0_flush_all' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:194:13: warning: 'l2x0_disable' defined but not used [-Wunused-function] 2 buildall.arm.multi_v5_defconfig.log.passed:warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 && DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) 2 buildall.arm.omap1_defconfig.log.passed:warning: (ARCH_OMAP1) selects ARCH_OMAP which has unmet direct dependencies (ARCH_MULTI_V6 || ARCH_MULTI_V7) 22 include/linux/ftrace.h:623:60: warning: unsupported argument to '__builtin_return_address' [enabled by default] 86 mm/madvise.c:145:9: warning: unused variable 'orig_pte' [-Wunused-variable] 92 arch/arm/include/asm/pgtable.h:206:50: warning: value computed is not used [-Wunused-value] 97 fs/nfs/pagelist.c:555:16: warning: unused variable 'inode' [-Wunused-variable] 113 fs/direct-io.c:1011:12: warning: 'from' may be used uninitialized in this function [-Wmaybe-uninitialized] 113 fs/direct-io.c:1011:12: warning: 'to' may be used uninitialized in this function [-Wmaybe-uninitialized] Section mismatches: 1 msm_defconfig WARNING: drivers/built-in.o(.data+0x4ae8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/built-in.o(.data+0x3640): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x154): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: vmlinux.o(.data+0x25828): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x3df00): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/built-in.o(.data+0x75c0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4090): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x86040): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x3de7c): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/built-in.o(.data+0x757c): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4050): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x85abc): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/built-in.o(.data+0x727c): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/built-in.o(.data+0x36c8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x160): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: vmlinux.o(.data+0x1d97c): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe()

10 years, 6 months

next boot: 64 boots: 59 pass, 5 fail (next-20140618)

by Kevin's boot bot

Tree/Branch: next Git describe: next-20140618 Failed boot tests (console logs at the end) =========================================== armada-xp-openblocks-ax3-4: FAIL: arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y armada-370-mirabox: FAIL: arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ste-snowball: FAIL: arm-u8500_defconfig armada-xp-openblocks-ax3-4: FAIL: arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y armada-370-mirabox: FAIL: arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.1 sec: PASS da850-evm 0 min 14.8 sec: PASS arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 17.7 sec: PASS tegra30-beaver 0 min 17.4 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 17.7 sec: PASS armada-xp-openblocks-ax3-4 0 min 24.0 sec: PASS omap5-uevm 1 min 37.5 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 13.1 sec: PASS (Warnings: 1) arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 21.9 sec: FAIL armada-370-mirabox 0 min 19.1 sec: FAIL arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 39.7 sec: PASS am335x-boneblack 0 min 22.2 sec: PASS omap3-beagle-xm 0 min 50.4 sec: PASS legacy,3530beagle 0 min 27.7 sec: PASS (Warnings: 1) omap4-panda 0 min 53.4 sec: PASS (Warnings: 1) omap3-overo-tobi 0 min 22.6 sec: PASS am335x-bone 0 min 28.9 sec: PASS omap3-overo-storm-tobi 0 min 25.0 sec: PASS omap5-uevm 0 min 58.1 sec: PASS (Warnings: 1) omap3-n900 0 min 16.8 sec: PASS legacy,n900 0 min 16.9 sec: PASS (Warnings: 2) omap4-panda-es 0 min 49.5 sec: PASS (Warnings: 1) legacy,3730storm 0 min 23.1 sec: PASS legacy,3530overo 0 min 21.2 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 15.4 sec: PASS (Warnings: 1) am335x-boneblack 0 min 22.1 sec: PASS sun7i-a20-cubieboard2 0 min 13.1 sec: PASS (Warnings: 1) sun4i-a10-cubieboard 0 min 17.5 sec: PASS exynos5410-smdk5410 0 min 30.7 sec: PASS (Warnings: 3) am335x-bone 0 min 23.6 sec: PASS tegra124-jetson-tk1 0 min 17.9 sec: PASS armada-370-mirabox 0 min 21.8 sec: PASS omap4-panda 0 min 53.8 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 14.4 sec: PASS imx6dl-wandboard,wand-dual 0 min 15.5 sec: PASS ste-snowball 1 min 11.4 sec: PASS tegra30-beaver 0 min 20.1 sec: PASS omap3-n900 0 min 16.5 sec: PASS qcom-apq8074-dragonboard 0 min 19.6 sec: PASS bcm28155-ap 0 min 26.3 sec: PASS omap3-overo-tobi 0 min 22.2 sec: PASS omap3-overo-storm-tobi 0 min 25.9 sec: PASS omap3-beagle-xm 0 min 50.1 sec: PASS exynos5420-arndale-octa 0 min 41.3 sec: PASS (Warnings: 7) armada-xp-openblocks-ax3-4 0 min 25.2 sec: PASS omap5-uevm 1 min 41.7 sec: PASS (Warnings: 1) omap4-panda-es 0 min 48.8 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 37.2 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 11.9 sec: PASS (Warnings: 1) sun4i-a10-cubieboard 0 min 11.4 sec: PASS arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard 0 min 17.2 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 23.4 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 39.9 sec: PASS (Warnings: 7) exynos5250-arndale 0 min 30.3 sec: PASS exynos5410-smdk5410 0 min 27.4 sec: PASS (Warnings: 3) arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 15.6 sec: PASS imx6dl-wandboard,wand-solo 0 min 15.8 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 14.1 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 1 min 50.6 sec: FAIL arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 23.6 sec: FAIL armada-370-mirabox 0 min 19.4 sec: FAIL arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.5 sec: PASS armada-370-mirabox 0 min 20.2 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 15.5 sec: PASS (Warnings: 1) Console logs for failures ========================= arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4: FAIL: last 40 lines of boot log: ------------------------------------------------------------ hub 2-0:1.0: 1 port detected usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice ata1: SATA link down (SStatus 0 SControl F300) ata2: SATA link down (SStatus 0 SControl F300) rtc-mv d0010300.rtc: internal RTC not ticking request_module: runaway loop modprobe binfmt-4c46 rtc-s35390a 1-0030: rtc core: registered rtc-s35390a as rtc0 orion_wdt: Initial timeout 171 sec usbcore: registered new interface driver usbhid usbhid: USB HID core driver of-flash f0000000.nor: do_map_probe() failed TCP: cubic registered input: soc:internal-regs:gpio_keys as /devices/soc/soc:internal-regs/soc:internal-regs:gpio_keys/input/input0 rtc-s35390a 1-0030: setting system clock to 2014-06-18 06:10:56 UTC (1403071856) ALSA device list: No soundcards found. Freeing unused kernel memory: 216K (c0584000 - c05ba000) Failed to execute /init (error -8) Starting init: /sbin/init exists but couldn't execute it (error -8) Starting init: /bin/sh exists but couldn't execute it (error -8) Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.16.0-rc1-next-20140618 #1 [<c0014b04>] (unwind_backtrace) from [<c0010eb0>] (show_stack+0x10/0x14) [<c0010eb0>] (show_stack) from [<c0427790>] (dump_stack+0x74/0x90) [<c0427790>] (dump_stack) from [<c00139dc>] (handle_IPI+0x134/0x170) [<c00139dc>] (handle_IPI) from [<c0008650>] (armada_370_xp_handle_irq+0xb0/0xcc) [<c0008650>] (armada_370_xp_handle_irq) from [<c0011980>] (__irq_svc+0x40/0x50) Exception stack(0xee87dfa8 to 0xee87dff0) dfa0: eefe03d8 00000000 00000cd0 00000000 ee87c000 c05c449c dfc0: c042ed88 c05f9e55 c05f9e55 562f5842 00000001 00000000 00000000 ee87dff0 dfe0: c000f168 c004eaf8 60000313 ffffffff [<c0011980>] (__irq_svc) from [<c004eaf8>] (cpu_startup_entry+0xe8/0x140) [<c004eaf8>] (cpu_startup_entry) from [<00008768>] (0x8768) ---[ end Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. ~$off # PYBOOT: Exception: userspace: failed to find root shell: Kernel panic # PYBOOT: Time: 21.91 seconds. # PYBOOT: Result: FAIL armada-370-mirabox: FAIL: last 40 lines of boot log: ---------------------------------------------------- orion-ehci d0051000.usb: EHCI Host Controller orion-ehci d0051000.usb: new USB bus registered, assigned bus number 2 orion-ehci d0051000.usb: irq 26, io mem 0xd0051000 orion-ehci d0051000.usb: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected xhci_hcd 0000:02:00.0: xHCI Host Controller xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected xhci_hcd 0000:02:00.0: xHCI Host Controller xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice rtc-mv d0010300.rtc: rtc core: registered d0010300.rtc as rtc0 request_module: runaway loop modprobe binfmt-4c46 orion_wdt: Initial timeout 229 sec usbcore: registered new interface driver usbhid usbhid: USB HID core driver TCP: cubic registered rtc-mv d0010300.rtc: setting system clock to 2014-06-17 11:54:10 UTC (1403006050) ALSA device list: No soundcards found. Freeing unused kernel memory: 216K (c0584000 - c05ba000) request_module: runaway loop modprobe binfmt-4c46 Failed to execute /init (error -8) mmc0: new high speed SDIO card at address 0001 mwifiex_sdio mmc0:0001:1: Direct firmware load failed with error -2 mwifiex_sdio mmc0:0001:1: Falling back to user helper Bluetooth: vendor=0x2df, device=0x911a, class=255, fn=2 Starting init: /sbin/init exists but couldn't execute it (error -8) Starting init: /bin/sh exists but couldn't execute it (error -8) Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. ---[ end Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. ~$off # PYBOOT: Exception: userspace: failed to find root shell: Kernel panic # PYBOOT: Time: 19.09 seconds. # PYBOOT: Result: FAIL arm-u8500_defconfig ------------------- ste-snowball: FAIL: last 40 lines of boot log: ---------------------------------------------- [ 3.503540] musb-hdrc musb-hdrc.20.auto: musb_init_controller failed with status -517 [ 3.511413] platform musb-hdrc.20.auto: Driver musb-hdrc requests probe deferral [ 3.519317] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.20.auto [ 3.531219] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.20.auto) status -22 [ 3.538543] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.550018] musb-ux500 musb-hdrc.20.auto: Error applying setting, reverse things back [ 3.558563] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.570495] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.577819] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.589294] musb-hdrc musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.597106] HS USB OTG: no transceiver configured [ 3.601837] musb-hdrc musb-hdrc.21.auto: musb_init_controller failed with status -517 [ 3.609680] platform musb-hdrc.21.auto: Driver musb-hdrc requests probe deferral [ 3.617584] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.629516] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.636840] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.648315] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.656829] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.668762] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.676086] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.687561] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.695404] HS USB OTG: no transceiver configured [ 3.700103] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.707946] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.715881] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.727783] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.735107] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.746582] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.755096] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.767028] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.774353] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.785827] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.793670] HS USB OTG: no transceiver configured [ 3.798370] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.806213] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.814147] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 110.57 seconds. # PYBOOT: Result: FAIL arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4: FAIL: last 40 lines of boot log: ------------------------------------------------------------ [ 2.517500] NET: Registered protocol family 29 [ 2.521973] can: raw protocol (rev 20120528) [ 2.526266] can: broadcast manager protocol (rev 20120528 t) [ 2.531958] can: netlink gateway (rev 20130117) max_hops=1 [ 2.537714] Key type dns_resolver registered [ 2.542068] ThumbEE CPU extension supported. [ 2.546371] Registering SWP/SWPB emulation handler [ 2.552088] input: soc:internal-regs:gpio_keys as /devices/soc/soc:internal-regs/soc:internal-regs:gpio_keys/input/input0 [ 2.563269] ../drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.570754] ALSA device list: [ 2.573730] No soundcards found. [ 2.577857] Freeing unused kernel memory: 660K (c0acb000 - c0b70000) [ 2.600397] Failed to execute /init (error -8) [ 2.613426] Starting init: /sbin/init exists but couldn't execute it (error -8) [ 2.629145] Starting init: /bin/sh exists but couldn't execute it (error -8) [ 2.636367] Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. [ 2.649530] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.16.0-rc1-next-20140618 #1 [ 2.657054] [<c0215a54>] (unwind_backtrace) from [<c021160c>] (show_stack+0x10/0x14) [ 2.664824] [<c021160c>] (show_stack) from [<c080659c>] (dump_stack+0x78/0x94) [ 2.672068] [<c080659c>] (dump_stack) from [<c08040f4>] (panic+0x90/0x21c) [ 2.678969] [<c08040f4>] (panic) from [<c0801e6c>] (kernel_init+0xc8/0xec) [ 2.685865] [<c0801e6c>] (kernel_init) from [<c020e9b8>] (ret_from_fork+0x14/0x3c) [ 2.693457] CPU1: stopping [ 2.696175] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.16.0-rc1-next-20140618 #1 [ 2.703685] [<c0215a54>] (unwind_backtrace) from [<c021160c>] (show_stack+0x10/0x14) [ 2.711453] [<c021160c>] (show_stack) from [<c080659c>] (dump_stack+0x78/0x94) [ 2.718696] [<c080659c>] (dump_stack) from [<c021429c>] (handle_IPI+0x138/0x174) [ 2.726113] [<c021429c>] (handle_IPI) from [<c02087f0>] (armada_370_xp_handle_irq+0xb0/0xcc) [ 2.734575] [<c02087f0>] (armada_370_xp_handle_irq) from [<c0212100>] (__irq_svc+0x40/0x50) [ 2.742946] Exception stack(0xea079f98 to 0xea079fe0) [ 2.748010] 9f80: ffffffed 00000000 [ 2.756209] 9fa0: ffffffed 00000000 c0b7a4c4 c0b7a458 00000000 00000000 c0b6eda8 0000004c [ 2.764409] 9fc0: 00000000 ea078000 00000000 ea079fe0 c020f4e4 c027b13c 60000313 ffffffff [ 2.772613] [<c0212100>] (__irq_svc) from [<c027b13c>] (cpu_startup_entry+0x1c8/0x208) [ 2.780553] [<c027b13c>] (cpu_startup_entry) from [<00208ac8>] (0x208ac8) [ 2.787362] ---[ end Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. ~$off # PYBOOT: Exception: userspace: failed to find root shell: Kernel panic # PYBOOT: Time: 23.61 seconds. # PYBOOT: Result: FAIL armada-370-mirabox: FAIL: last 40 lines of boot log: ---------------------------------------------------- [ 1.433806] orion_wdt: Initial timeout 229 sec [ 1.439113] sdhci: Secure Digital Host Controller Interface driver [ 1.445321] sdhci: Copyright(c) Pierre Ossman [ 1.477964] Synopsys Designware Multimedia Card Interface Driver [ 1.484374] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.490671] usbcore: registered new interface driver usbhid [ 1.496272] usbhid: USB HID core driver [ 1.502985] TCP: cubic registered [ 1.506320] NET: Registered protocol family 17 [ 1.510802] can: controller area network core (rev 20120528 abi 9) [ 1.517075] NET: Registered protocol family 29 [ 1.521555] can: raw protocol (rev 20120528) [ 1.525854] can: broadcast manager protocol (rev 20120528 t) [ 1.531542] can: netlink gateway (rev 20130117) max_hops=1 [ 1.537362] Key type dns_resolver registered [ 1.541735] ThumbEE CPU extension supported. [ 1.546038] Registering SWP/SWPB emulation handler [ 1.551881] rtc-mv d0010300.rtc: setting system clock to 2014-06-17 11:52:47 UTC (1403005967) [ 1.561071] ALSA device list: [ 1.564063] No soundcards found. [ 1.568278] Freeing unused kernel memory: 660K (c0acb000 - c0b70000) [ 1.585201] request_module: runaway loop modprobe binfmt-4c46 [ 1.601312] request_module: runaway loop modprobe binfmt-4c46 [ 1.607364] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 1.616761] Failed to execute /init (error -8) [ 1.629760] mmc0: new high speed SDIO card at address 0001 [ 1.639521] Starting init: /sbin/init exists but couldn't execute it (error -8) [ 1.656623] Starting init: /bin/sh exists but couldn't execute it (error -8) [ 1.663757] Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. [ 1.676910] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.16.0-rc1-next-20140618 #1 [ 1.684436] [<c0215a54>] (unwind_backtrace) from [<c021160c>] (show_stack+0x10/0x14) [ 1.692203] [<c021160c>] (show_stack) from [<c080659c>] (dump_stack+0x78/0x94) [ 1.699442] [<c080659c>] (dump_stack) from [<c08040f4>] (panic+0x90/0x21c) [ 1.706342] [<c08040f4>] (panic) from [<c0801e6c>] (kernel_init+0xc8/0xec) [ 1.713234] [<c0801e6c>] (kernel_init) from [<c020e9b8>] (ret_from_fork+0x14/0x3c) [ 1.720822] ---[ end Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. ~$off # PYBOOT: Exception: userspace: failed to find root shell: Kernel panic # PYBOOT: Time: 19.42 seconds. # PYBOOT: Result: FAIL

10 years, 6 months

← Newer
1
...
10
11
12
13
14
15
16
...
39
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports June 2014