Kernel-build-reports June 2014

kernel-build-reports@lists.linaro.org

17 participants
388 discussions

mainline boot: 64 boots: 63 pass, 1 fail (v3.16-rc2-201-gf40ede3)

by Kevin's boot bot

Full logs here: http://armcloud.us/kernel-ci/mainline/v3.16-rc2-201-gf40ede3 Tree/Branch: mainline Git describe: v3.16-rc2-201-gf40ede3 Failed boot tests ================= ste-snowball: FAIL: arm-u8500_defconfig http://armcloud.us/kernel-ci/mainline/v3.16-rc2-201-gf40ede3/arm-u8500_defc… Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 18.5 sec: PASS da850-evm 0 min 16.5 sec: PASS arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 18.7 sec: PASS tegra30-beaver 0 min 18.1 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 18.5 sec: PASS armada-xp-openblocks-ax3-4 0 min 24.6 sec: PASS omap5-uevm 1 min 37.4 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 13.4 sec: PASS arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 24.0 sec: PASS armada-370-mirabox 0 min 20.9 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 41.5 sec: PASS am335x-boneblack 0 min 22.9 sec: PASS omap3-beagle-xm 0 min 45.5 sec: PASS legacy,3530beagle 0 min 24.1 sec: PASS (Warnings: 1) omap4-panda 0 min 56.1 sec: PASS (Warnings: 1) omap3-overo-tobi 0 min 24.0 sec: PASS am335x-bone 0 min 29.8 sec: PASS omap3-overo-storm-tobi 0 min 22.1 sec: PASS omap5-uevm 0 min 57.6 sec: PASS (Warnings: 1) omap3-n900 0 min 18.0 sec: PASS legacy,n900 0 min 17.8 sec: PASS (Warnings: 1) omap4-panda-es 0 min 58.1 sec: PASS (Warnings: 1) legacy,3730storm 0 min 22.9 sec: PASS legacy,3530overo 0 min 22.3 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 16.3 sec: PASS am335x-boneblack 0 min 22.6 sec: PASS sun7i-a20-cubieboard2 0 min 13.5 sec: PASS sun4i-a10-cubieboard 0 min 13.3 sec: PASS exynos5410-smdk5410 0 min 29.5 sec: PASS am335x-bone 0 min 24.3 sec: PASS tegra124-jetson-tk1 0 min 18.5 sec: PASS armada-370-mirabox 0 min 22.3 sec: PASS omap4-panda 0 min 57.7 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 14.5 sec: PASS imx6dl-wandboard,wand-dual 0 min 16.2 sec: PASS ste-snowball 1 min 19.4 sec: PASS tegra30-beaver 0 min 18.2 sec: PASS omap3-n900 0 min 16.6 sec: PASS qcom-apq8074-dragonboard 0 min 18.8 sec: PASS bcm28155-ap 0 min 27.1 sec: PASS omap3-overo-tobi 0 min 23.1 sec: PASS omap3-overo-storm-tobi 0 min 21.5 sec: PASS omap3-beagle-xm 0 min 50.3 sec: PASS exynos5420-arndale-octa 0 min 40.1 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.5 sec: PASS omap5-uevm 1 min 46.3 sec: PASS (Warnings: 1) omap4-panda-es 0 min 56.7 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 32.1 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 12.1 sec: PASS sun4i-a10-cubieboard 0 min 11.7 sec: PASS arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard 0 min 18.1 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 23.6 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 39.3 sec: PASS exynos5250-arndale 0 min 30.4 sec: PASS exynos5410-smdk5410 0 min 27.8 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 16.2 sec: PASS imx6dl-wandboard,wand-solo 0 min 16.6 sec: PASS imx6q-wandboard 0 min 14.9 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 1 min 53.5 sec: FAIL arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 27.0 sec: PASS armada-370-mirabox 0 min 22.9 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.7 sec: PASS armada-370-mirabox 0 min 20.6 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 16.0 sec: PASS (Warnings: 1)

10 years, 5 months

mainline boot: 41 passed 3 failed (mainline/v3.16-rc2-201-gf40ede3)

by Olof's autobooter

Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v3.16-rc2-201-gf40ede3/ Failed boards: capri bcm_defconfig : FAILED 1:44.55 snow multi_lpae_defconfig : FAILED 1:22.23 snowball u8500_defconfig : FAILED 2:03.17 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:14.31 arndale exynos_defconfig : passed 1:18.10 arndale multi_v7_defconfig : passed 1:33.39 arndale multi_lpae_defconfig : passed 1:26.52 bbb omap2plus_defconfig : passed 1:32.72 bbb multi_v7_defconfig : passed 1:21.86 beaver tegra_defconfig : passed 1:04.58 beaver multi_v7_defconfig : passed 0:54.31 capri multi_v7_defconfig : passed 0:40.49 colombus sunxi_defconfig : passed 1:03.69 colombus multi_v7_defconfig : passed 1:02.62 colombus multi_lpae_defconfig : passed 1:03.01 cubie sunxi_defconfig : passed 1:25.11 cubie multi_v7_defconfig : passed 1:22.48 cubie2 sunxi_defconfig : passed 1:17.41 cubie2 multi_v7_defconfig : passed 1:36.10 cubie2 multi_lpae_defconfig : passed 1:03.22 cubox multi_v7_defconfig : passed 1:01.78 dalmore tegra_defconfig : passed 1:19.91 dalmore multi_v7_defconfig : passed 1:20.32 dalmore multi_lpae_defconfig : passed 1:36.84 hummingboard imx_v6_v7_defconfig : passed 1:25.01 hummingboard multi_v7_defconfig : passed 1:18.42 jetsontk1 tegra_defconfig : passed 1:03.29 jetsontk1 multi_v7_defconfig : passed 0:57.83 jetsontk1 multi_lpae_defconfig : passed 0:55.63 omap5uevm omap2plus_defconfig : warnings 1:03.84 omap5uevm multi_v7_defconfig : warnings 2:12.66 omap5uevm multi_lpae_defconfig : warnings 1:56.98 panda omap2plus_defconfig : warnings 1:37.46 panda multi_v7_defconfig : warnings 1:43.54 sama5 sama5_defconfig : warnings 1:53.06 seaboard tegra_defconfig : passed 1:00.22 seaboard multi_v7_defconfig : passed 1:11.25 snow exynos_defconfig : passed 0:56.04 snow multi_v7_defconfig : passed 0:55.87 snowball multi_v7_defconfig : passed 4:42.25 trimslice tegra_defconfig : passed 1:03.53 trimslice multi_v7_defconfig : passed 1:13.17 wandboard imx_v6_v7_defconfig : passed 1:08.95 wandboard multi_v7_defconfig : passed 1:10.92 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board capri-bcm_defconfig failure log: ------------------------------------------------- [ 0.480000] vsr: at 1240 mV [ 0.480000] gpldo1: at 1200 mV [ 0.480000] gpldo2: at 3300 mV [ 0.490000] gpldo3: at 1200 mV [ 0.490000] gpldo4: at 1800 mV [ 0.490000] gpldo5: at 1200 mV [ 0.500000] gpldo6: at 2900 mV [ 0.500000] : no parameters [ 0.500000] : Failed to create debugfs directory [ 0.510000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.510000] sdhci: Secure Digital Host Controller Interface driver [ 0.520000] sdhci: Copyright(c) Pierre Ossman [ 0.520000] TCP: cubic registered [ 0.520000] NET: Registered protocol family 10 [ 0.530000] sit: IPv6 over IPv4 tunneling driver [ 0.530000] NET: Registered protocol family 17 [ 0.530000] NET: Registered protocol family 15 [ 0.540000] ThumbEE CPU extension supported. [ 0.540000] gpldo6: disabling [ 0.550000] gpldo5: disabling [ 0.550000] gpldo4: disabling [ 0.550000] gpldo3: disabling [ 0.560000] gpldo2: disabling [ 0.560000] gpldo1: disabling [ 0.560000] vsr: disabling [ 0.570000] sdsr2: disabling [ 0.570000] sdsr1: disabling [ 0.570000] msr: disabling [ 0.580000] iosr2: disabling [ 0.580000] csr: disabling [ 0.580000] mmcldo2: disabling [ 0.590000] mmcldo1: disabling [ 0.590000] Waiting for root device /dev/mmcblk0p8... [PYBOOT] [capri 01:41]: Timed out waiting for "<type 'str'>": [PYBOOT] [capri 01:42]: got exception: timeout ~$off [PYBOOT] [capri 01:44]: Done. ======================================================================== Board snow-multi_lpae_defconfig failure log: ------------------------------------------------- [ 37.321164] cpufreq: __target_index: Failed to change cpu frequency: -22 [ 37.505332] exynos-cpufreq exynos-cpufreq: failed to set cpu voltage to 925000 [ 37.511170] cpufreq: __target_index: Failed to change cpu frequency: -22 [ 37.715326] exynos-cpufreq exynos-cpufreq: failed to set cpu voltage to 925000 [ 37.721164] cpufreq: __target_index: Failed to change cpu frequency: -22 [ 37.815353] exynos-cpufreq exynos-cpufreq: failed to set cpu voltage to 937500 [ 37.821169] cpufreq: __target_index: Failed to change cpu frequency: -22 [ 37.915297] exynos-cpufreq exynos-cpufreq: failed to set cpu voltage to 950000 [ 37.921081] cpufreq: __target_index: Failed to change cpu frequency: -22 [ 38.115247] exynos-cpufreq exynos-cpufreq: failed to set cpu voltage to 925000 [ 38.121089] cpufreq: __target_index: Failed to change cpu frequency: -22 [ 38.315339] exynos-cpufreq exynos-cpufreq: failed to set cpu voltage to 925000 [ 38.321180] cpufreq: __target_index: Failed to change cpu frequency: -22 [ 38.515340] exynos-cpufreq exynos-cpufreq: failed to set cpu voltage to 925000 [ 38.521195] cpufreq: __target_index: Failed to change cpu frequency: -22 [ 38.715348] exynos-cpufreq exynos-cpufreq: failed to set cpu voltage to 925000 [ 38.721187] cpufreq: __target_index: Failed to change cpu frequency: -22 [ 38.850425] exynos-cpufreq exynos-cpufreq: failed to set cpu voltage to 937500 [ 38.856243] cpufreq: __target_index: Failed to change cpu frequency: -22 [ 38.915302] exynos-cpufreq exynos-cpufreq: failed to set cpu voltage to 975000 [ 38.921078] cpufreq: __target_index: Failed to change cpu frequency: -22 [ 39.115269] exynos-cpufreq exynos-cpufreq: failed to set cpu voltage to 925000 [ 39.121112] cpufreq: __target_index: Failed to change cpu frequency: -22 [ 39.315329] exynos-cpufreq exynos-cpufreq: failed to set cpu voltage to 925000 [ 39.321177] cpufreq: __target_index: Failed to change cpu frequency: -22 [ 39.515337] exynos-cpufreq exynos-cpufreq: failed to set cpu voltage to 925000 [ 39.521188] cpufreq: __target_index: Failed to change cpu frequency: -22 [ 39.715335] exynos-cpufreq exynos-cpufreq: failed to set cpu voltage to 925000 [ 39.721177] cpufreq: __target_index: Failed to change cpu frequency: -22 [ 39.890370] exynos-cpufreq exynos-cpufreq: failed to set cpu voltage to 925000 [ 39.896224] cpufreq: __target_index: Failed to change cpu frequency: -22 [ 40.115322] exynos-cpufreq exynos-cpufreq: failed to set cpu voltage to 925000 [ 40.121169] cpufreq: __target_index: Failed to change cpu frequency: -22 [ 40.315330] exynos-cpufreq exynos-cpufreq: failed to set cpu voltage to 925000 [ 40.321172] cpufreq: __target_index: Failed to change cpu frequency: -22 [PYBOOT] [snow 01:20]: got exception: ERROR: Timeout waiting for command: dmesg -l err | awk '{ print "[ERR] " $0 }'. ~$off [PYBOOT] [snow 01:21]: Done. ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.590240] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.597564] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.609039] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.616851] HS USB OTG: no transceiver configured [ 3.621582] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.629425] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.637329] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.649261] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.656585] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.668060] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.676666] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.688568] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.695892] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.707366] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.715179] HS USB OTG: no transceiver configured [ 3.719909] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.727752] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.735687] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.747619] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.754943] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.766418] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.774993] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.786926] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.794250] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.805725] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.813537] HS USB OTG: no transceiver configured [ 3.818237] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.826110] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.834045] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.845947] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.853271] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.864746] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.873321] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [PYBOOT] [snowball 02:00]: Timed out waiting for "<type 'str'>": [PYBOOT] [snowball 02:01]: got exception: timeout ~$off [PYBOOT] [snowball 02:02]: Done.

10 years, 5 months

mainline build: 243 warnings 0 failures (mainline/v3.16-rc2-201-gf40ede3)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: f40ede3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.16-rc2-201-gf40ede3/ Runtime: 45m 44s Passed: 126 Failed: 0 Warnings: 243 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/clk/clk-efm32gg.c:81:189: warning: comparison of distinct pointer types lacks a cast [enabled by default] 1 drivers/mmc/host/sunxi-mmc.c:297:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/tty/serial/samsung.c:1229:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 2 arch/arm/mm/cache-l2x0.c:167:13: warning: 'l2x0_cache_sync' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:184:13: warning: 'l2x0_flush_all' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:194:13: warning: 'l2x0_disable' defined but not used [-Wunused-function] 2 buildall.arm.multi_v5_defconfig.log.passed:warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 && DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) 2 buildall.arm.omap1_defconfig.log.passed:warning: (ARCH_OMAP1) selects ARCH_OMAP which has unmet direct dependencies (ARCH_MULTI_V6 || ARCH_MULTI_V7) 4 drivers/spi/spi-rspi.c:633:6: warning: unused variable 'ret' [-Wunused-variable] 113 fs/direct-io.c:1011:12: warning: 'from' may be used uninitialized in this function [-Wmaybe-uninitialized] 113 fs/direct-io.c:1011:12: warning: 'to' may be used uninitialized in this function [-Wmaybe-uninitialized] Section mismatches:

10 years, 5 months

mainline boot: 64 boots: 61 pass, 3 fail (v3.16-rc2-117-gec71fea)

by Kevin's boot bot

Full logs here: http://armcloud.us/kernel-ci/mainline/v3.16-rc2-117-gec71fea Tree/Branch: mainline Git describe: v3.16-rc2-117-gec71fea Failed boot tests ================= exynos5420-arndale-octa: FAIL: arm-multi_v7_defconfig http://armcloud.us/kernel-ci/mainline/v3.16-rc2-117-gec71fea/arm-multi_v7_d… exynos5420-arndale-octa: FAIL: arm-exynos_defconfig http://armcloud.us/kernel-ci/mainline/v3.16-rc2-117-gec71fea/arm-exynos_def… ste-snowball: FAIL: arm-u8500_defconfig http://armcloud.us/kernel-ci/mainline/v3.16-rc2-117-gec71fea/arm-u8500_defc… Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 21.9 sec: PASS da850-evm 0 min 16.9 sec: PASS arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 18.7 sec: PASS tegra30-beaver 0 min 24.9 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 18.8 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.1 sec: PASS omap5-uevm 1 min 38.8 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 13.8 sec: PASS arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 25.8 sec: PASS armada-370-mirabox 0 min 22.4 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 45.6 sec: PASS am335x-boneblack 0 min 23.6 sec: PASS omap3-beagle-xm 0 min 51.6 sec: PASS legacy,3530beagle 0 min 23.6 sec: PASS (Warnings: 1) omap4-panda 0 min 56.4 sec: PASS (Warnings: 1) omap3-overo-tobi 0 min 24.1 sec: PASS am335x-bone 0 min 25.3 sec: PASS omap3-overo-storm-tobi 0 min 25.3 sec: PASS omap5-uevm 0 min 55.0 sec: PASS (Warnings: 1) omap3-n900 0 min 18.5 sec: PASS legacy,n900 0 min 17.2 sec: PASS (Warnings: 1) omap4-panda-es 0 min 54.0 sec: PASS (Warnings: 1) legacy,3730storm 0 min 24.0 sec: PASS legacy,3530overo 0 min 22.5 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 15.9 sec: PASS am335x-boneblack 0 min 28.3 sec: PASS sun7i-a20-cubieboard2 0 min 13.7 sec: PASS sun4i-a10-cubieboard 0 min 16.3 sec: PASS exynos5410-smdk5410 0 min 29.5 sec: PASS am335x-bone 0 min 24.9 sec: PASS tegra124-jetson-tk1 0 min 18.8 sec: PASS armada-370-mirabox 0 min 22.7 sec: PASS omap4-panda 0 min 56.1 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 14.7 sec: PASS imx6dl-wandboard,wand-dual 0 min 17.7 sec: PASS ste-snowball 1 min 15.3 sec: PASS tegra30-beaver 0 min 21.4 sec: PASS omap3-n900 0 min 16.3 sec: PASS qcom-apq8074-dragonboard 0 min 20.5 sec: PASS bcm28155-ap 0 min 30.6 sec: PASS omap3-overo-tobi 0 min 26.2 sec: PASS omap3-overo-storm-tobi 0 min 22.0 sec: PASS omap3-beagle-xm 0 min 52.0 sec: PASS exynos5420-arndale-octa 1 min 9.8 sec: FAIL armada-xp-openblocks-ax3-4 0 min 26.1 sec: PASS omap5-uevm 1 min 42.2 sec: PASS (Warnings: 1) omap4-panda-es 0 min 50.3 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 32.7 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 12.2 sec: PASS sun4i-a10-cubieboard 0 min 12.2 sec: PASS arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard 0 min 18.2 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 23.3 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 37.7 sec: FAIL exynos5250-arndale 0 min 30.8 sec: PASS exynos5410-smdk5410 0 min 28.4 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 16.9 sec: PASS imx6dl-wandboard,wand-solo 0 min 17.1 sec: PASS imx6q-wandboard 0 min 15.2 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 1 min 53.7 sec: FAIL arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 28.0 sec: PASS armada-370-mirabox 0 min 23.6 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 23.2 sec: PASS armada-370-mirabox 0 min 20.8 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 16.3 sec: PASS (Warnings: 1)

10 years, 5 months

mainline boot: 41 passed 3 failed (mainline/v3.16-rc2-117-gec71fea)

by Olof's autobooter

Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v3.16-rc2-117-gec71fea/ Failed boards: capri bcm_defconfig : FAILED 1:45.41 colombus sunxi_defconfig : FAILED 1:06.90 snowball u8500_defconfig : FAILED 2:04.96 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:16.63 arndale exynos_defconfig : passed 1:14.28 arndale multi_v7_defconfig : passed 1:32.25 arndale multi_lpae_defconfig : passed 1:21.76 bbb omap2plus_defconfig : passed 1:31.02 bbb multi_v7_defconfig : passed 1:26.71 beaver tegra_defconfig : passed 1:12.72 beaver multi_v7_defconfig : passed 1:03.31 capri multi_v7_defconfig : passed 0:41.82 colombus multi_v7_defconfig : passed 1:00.71 colombus multi_lpae_defconfig : passed 1:01.09 cubie sunxi_defconfig : passed 1:21.66 cubie multi_v7_defconfig : passed 1:44.99 cubie2 sunxi_defconfig : passed 1:24.68 cubie2 multi_v7_defconfig : warnings 1:30.16 cubie2 multi_lpae_defconfig : passed 1:22.91 cubox multi_v7_defconfig : passed 1:10.96 dalmore tegra_defconfig : passed 1:30.82 dalmore multi_v7_defconfig : passed 1:28.14 dalmore multi_lpae_defconfig : passed 1:21.74 hummingboard imx_v6_v7_defconfig : passed 1:21.04 hummingboard multi_v7_defconfig : passed 1:11.59 jetsontk1 tegra_defconfig : passed 0:55.31 jetsontk1 multi_v7_defconfig : passed 0:59.54 jetsontk1 multi_lpae_defconfig : passed 1:04.25 omap5uevm omap2plus_defconfig : warnings 1:05.00 omap5uevm multi_v7_defconfig : warnings 2:03.18 omap5uevm multi_lpae_defconfig : warnings 1:51.81 panda omap2plus_defconfig : warnings 1:28.82 panda multi_v7_defconfig : warnings 1:55.35 sama5 sama5_defconfig : warnings 1:54.80 seaboard tegra_defconfig : passed 1:05.16 seaboard multi_v7_defconfig : passed 1:07.61 snow exynos_defconfig : passed 1:01.06 snow multi_v7_defconfig : passed 0:55.79 snow multi_lpae_defconfig : passed 0:58.31 snowball multi_v7_defconfig : passed 3:28.71 trimslice tegra_defconfig : passed 1:05.86 trimslice multi_v7_defconfig : passed 1:21.50 wandboard imx_v6_v7_defconfig : passed 1:09.92 wandboard multi_v7_defconfig : passed 1:13.34 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board capri-bcm_defconfig failure log: ------------------------------------------------- [ 0.480000] vsr: at 1240 mV [ 0.480000] gpldo1: at 1200 mV [ 0.480000] gpldo2: at 3300 mV [ 0.490000] gpldo3: at 1200 mV [ 0.490000] gpldo4: at 1800 mV [ 0.490000] gpldo5: at 1200 mV [ 0.500000] gpldo6: at 3000 mV [ 0.500000] : no parameters [ 0.500000] : Failed to create debugfs directory [ 0.510000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.510000] sdhci: Secure Digital Host Controller Interface driver [ 0.520000] sdhci: Copyright(c) Pierre Ossman [ 0.520000] TCP: cubic registered [ 0.520000] NET: Registered protocol family 10 [ 0.530000] sit: IPv6 over IPv4 tunneling driver [ 0.530000] NET: Registered protocol family 17 [ 0.530000] NET: Registered protocol family 15 [ 0.540000] ThumbEE CPU extension supported. [ 0.540000] gpldo6: disabling [ 0.550000] gpldo5: disabling [ 0.550000] gpldo4: disabling [ 0.550000] gpldo3: disabling [ 0.560000] gpldo2: disabling [ 0.560000] gpldo1: disabling [ 0.560000] vsr: disabling [ 0.570000] sdsr2: disabling [ 0.570000] sdsr1: disabling [ 0.570000] msr: disabling [ 0.580000] iosr2: disabling [ 0.580000] csr: disabling [ 0.580000] mmcldo2: disabling [ 0.590000] mmcldo1: disabling [ 0.590000] Waiting for root device /dev/mmcblk0p8... [PYBOOT] [capri 01:42]: Timed out waiting for "<type 'str'>": [PYBOOT] [capri 01:43]: got exception: timeout ~$off [PYBOOT] [capri 01:44]: Done. ======================================================================== Board colombus-sunxi_defconfig failure log: ------------------------------------------------- fastboot_bulk_endpoint_reset usb_base = 0x1c19000 sram_base = 0x1c00000 ccmu_base = 0x1c20000 address = 0x0 speed = 0x0 bulk_ep_size = 0x200 fifo_size = 0x200 Fastboot entered boot tIRQ: suspend mp/colombus-FHHMLuIRQ: reset /zImagIRQ: reset eratxIaddress:95, speed:3, bulk_ep_size:512, fifo_size:512 usb enter high speed SetAddress: 95 sfastboot_bulk_endpoint_reset usb_base = 0x1c19000 sram_base = 0x1c00000 ccmu_base = 0x1c20000 address = 0x5f speed = 0x3 bulk_ep_size = 0x200 fifo_size = 0x200 (user:build) Load fastboot kernel creating boot image... creating boot image - 2596864 bytes downloading 'boot.img'... OKAY [ 0.659s] booting... FAILED (remote: boot command not supported) finished. total time: 0.667s node: colombus status: on [PYBOOT] [colombus 01:04]: Timed out waiting for "<type 'str'>": [PYBOOT] [colombus 01:05]: got exception: timeout ~$off [PYBOOT] [colombus 01:06]: Done. ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.589996] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.597320] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.608795] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.616607] HS USB OTG: no transceiver configured [ 3.621337] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.629180] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.637084] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.649017] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.656341] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.667816] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.676391] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.688323] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.695648] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.707122] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.714935] HS USB OTG: no transceiver configured [ 3.719635] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.727508] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.735443] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.747375] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.754699] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.766174] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.774749] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.786682] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.794006] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.805480] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.813293] HS USB OTG: no transceiver configured [ 3.818023] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.825866] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.833801] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.845703] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.853027] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.864501] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.873107] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [PYBOOT] [snowball 02:02]: Timed out waiting for "<type 'str'>": [PYBOOT] [snowball 02:03]: got exception: timeout ~$off [PYBOOT] [snowball 02:04]: Done.

10 years, 5 months

mainline build: 243 warnings 0 failures (mainline/v3.16-rc2-117-gec71fea)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: ec71fea Merge tag 'nfs-for-3.16-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.16-rc2-117-gec71fea/ Runtime: 45m 45s Passed: 126 Failed: 0 Warnings: 243 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/clk/clk-efm32gg.c:81:189: warning: comparison of distinct pointer types lacks a cast [enabled by default] 1 drivers/mmc/host/sunxi-mmc.c:297:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/tty/serial/samsung.c:1229:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 2 arch/arm/mm/cache-l2x0.c:167:13: warning: 'l2x0_cache_sync' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:184:13: warning: 'l2x0_flush_all' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:194:13: warning: 'l2x0_disable' defined but not used [-Wunused-function] 2 buildall.arm.multi_v5_defconfig.log.passed:warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 && DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) 2 buildall.arm.omap1_defconfig.log.passed:warning: (ARCH_OMAP1) selects ARCH_OMAP which has unmet direct dependencies (ARCH_MULTI_V6 || ARCH_MULTI_V7) 4 drivers/spi/spi-rspi.c:633:6: warning: unused variable 'ret' [-Wunused-variable] 113 fs/direct-io.c:1011:12: warning: 'from' may be used uninitialized in this function [-Wmaybe-uninitialized] 113 fs/direct-io.c:1011:12: warning: 'to' may be used uninitialized in this function [-Wmaybe-uninitialized] Section mismatches:

10 years, 5 months

queue boot: 24 passed 7 failed (queue/v3.12.23)

by Olof's autobooter

Full logs are available at http://arm-soc.lixom.net/bootlogs/queue/v3.12.23/ Failed boards: bbb omap2plus_defconfig : FAILED 1:55.91 bbb multi_v7_defconfig : FAILED 1:49.29 colombus multi_v7_defconfig : FAILED 1:50.77 colombus multi_lpae_defconfig : FAILED 1:46.93 omap5uevm omap2plus_defconfig : FAILED 1:19.06 omap5uevm multi_v7_defconfig : FAILED 1:16.80 omap5uevm multi_lpae_defconfig : FAILED 1:19.65 Successful boards: arndale exynos_defconfig : passed 1:16.48 beaver tegra_defconfig : passed 0:59.08 beaver multi_v7_defconfig : passed 0:42.65 capri bcm_defconfig : passed 0:38.38 capri multi_v7_defconfig : passed 0:38.35 cubie multi_v7_defconfig : passed 1:25.81 cubie2 multi_v7_defconfig : passed 1:06.14 cubie2 multi_lpae_defconfig : passed 1:15.12 cubox dove_defconfig : passed 0:59.52 dalmore tegra_defconfig : passed 1:32.11 dalmore multi_v7_defconfig : passed 1:04.60 dalmore multi_lpae_defconfig : passed 1:03.89 panda omap2plus_defconfig : passed 1:39.32 panda multi_v7_defconfig : passed 1:22.93 sama5 sama5_defconfig : passed 1:58.41 seaboard tegra_defconfig : passed 1:01.09 seaboard multi_v7_defconfig : passed 0:53.47 snow exynos_defconfig : passed 1:25.72 snowball u8500_defconfig : passed 3:07.92 snowball multi_v7_defconfig : passed 0:55.76 trimslice tegra_defconfig : passed 1:00.70 trimslice multi_v7_defconfig : passed 0:49.29 wandboard imx_v6_v7_defconfig : passed 1:08.66 wandboard multi_v7_defconfig : passed 0:47.87 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board bbb-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.262495] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.262514] io scheduler noop registered [ 0.262526] io scheduler deadline registered [ 0.262770] io scheduler cfq registered (default) [ 0.263631] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 0.341561] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.343451] Serial: IMX driver [ 0.344424] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 0.936184] console [ttyO0] enabled [ 0.941018] serial: Freescale lpuart driver [ 0.945805] [drm] Initialized drm 1.1.0 20060810 [ 0.952741] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.959628] ehci-platform: EHCI generic platform driver [ 0.965297] ehci-omap: OMAP-EHCI Host Controller driver [ 0.970926] ehci-orion: EHCI orion driver [ 0.975240] SPEAr-ehci: EHCI SPEAr driver [ 0.979561] tegra-ehci: Tegra EHCI driver [ 0.984166] usbcore: registered new interface driver usb-storage [ 0.991987] mousedev: PS/2 mouse device common for all mice [ 0.999164] sdhci: Secure Digital Host Controller Interface driver [ 1.005760] sdhci: Copyright(c) Pierre Ossman [ 1.010797] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.017744] usbcore: registered new interface driver usbhid [ 1.023663] usbhid: USB HID core driver [ 1.028109] TCP: cubic registered [ 1.032512] NET: Registered protocol family 10 [ 1.038242] sit: IPv6 over IPv4 tunneling driver [ 1.044234] Key type dns_resolver registered [ 1.048935] Registering SWP/SWPB emulation handler [ 1.054832] regulator-dummy: disabling [ 1.060312] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.066306] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.076411] Waiting for root device /dev/mmcblk0p2... [PYBOOT] [bbb 01:46]: Timed out waiting for "<type 'str'>": [PYBOOT] [bbb 01:47]: got exception: timeout ~$off [PYBOOT] [bbb 01:48]: Done. ======================================================================== Board bbb-omap2plus_defconfig failure log: ------------------------------------------------- [ 1.884004] of_get_named_gpio_flags exited with status 53 [ 1.891966] of_get_named_gpio_flags exited with status 54 [ 1.898867] of_get_named_gpio_flags exited with status 55 [ 1.905516] of_get_named_gpio_flags exited with status 56 [ 1.914234] ledtrig-cpu: registered to indicate activity on CPUs [ 1.923282] usbcore: registered new interface driver usbhid [ 1.929369] usbhid: USB HID core driver [ 1.935570] oprofile: no performance counters [ 1.943256] oprofile: using timer interrupt. [ 1.948874] TCP: cubic registered [ 1.952384] Initializing XFRM netlink socket [ 1.957130] NET: Registered protocol family 17 [ 1.961937] NET: Registered protocol family 15 [ 1.967223] Key type dns_resolver registered [ 1.971883] ThumbEE CPU extension supported. [ 1.976778] Registering SWP/SWPB emulation handler [ 1.986813] regulator-dummy: disabling [ 2.007946] DCDC1: at 1500 mV [ 2.014204] vdd_mpu: 925 <--> 1325 mV at 1100 mV [ 2.022461] vdd_core: 925 <--> 1150 mV at 1100 mV [ 2.030781] LDO1: at 1800 mV [ 2.036979] LDO2: at 3300 mV [ 2.043947] LDO3: 1800 mV [ 2.051554] LDO4: at 3300 mV [ 2.057824] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.063560] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.135188] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 2.141633] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 2.151785] libphy: 4a101000.mdio: probed [ 2.156181] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 [ 2.166395] Random MACID = 3e:9e:b7:f0:84:df [ 2.177407] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.191528] Waiting for root device /dev/mmcblk0p2... [PYBOOT] [bbb 01:53]: Timed out waiting for "<type 'str'>": [PYBOOT] [bbb 01:54]: got exception: timeout ~$off [PYBOOT] [bbb 01:55]: Done. ======================================================================== Board colombus-multi_lpae_defconfig failure log: ------------------------------------------------- [ 0.097978] Key type id_legacy registered [ 0.098223] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.098235] io scheduler noop registered [ 0.098241] io scheduler deadline registered [ 0.098367] io scheduler cfq registered (default) [ 0.099959] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.143255] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.165132] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 32, base_baud = 1500000) is a U6_16550A [ 0.707466] console [ttyS0] enabled [ 0.711228] Serial: IMX driver [ 0.714674] serial: Freescale lpuart driver [ 0.719060] [drm] Initialized drm 1.1.0 20060810 [ 0.724644] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.731183] ehci-platform: EHCI generic platform driver [ 0.736448] ehci-omap: OMAP-EHCI Host Controller driver [ 0.741716] ehci-orion: EHCI orion driver [ 0.745757] SPEAr-ehci: EHCI SPEAr driver [ 0.749812] tegra-ehci: Tegra EHCI driver [ 0.754001] usbcore: registered new interface driver usb-storage [ 0.760727] mousedev: PS/2 mouse device common for all mice [ 0.766931] sdhci: Secure Digital Host Controller Interface driver [ 0.773124] sdhci: Copyright(c) Pierre Ossman [ 0.777619] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.783781] usbcore: registered new interface driver usbhid [ 0.789359] usbhid: USB HID core driver [ 0.793590] TCP: cubic registered [ 0.797377] NET: Registered protocol family 10 [ 0.802544] sit: IPv6 over IPv4 tunneling driver [ 0.807833] Key type dns_resolver registered [ 0.812255] Registering SWP/SWPB emulation handler [ 0.817498] regulator-dummy: disabling [ 0.821448] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.830495] Waiting for root device /dev/mmcblk0p1... [PYBOOT] [colombus 01:44]: Timed out waiting for "<type 'str'>": [PYBOOT] [colombus 01:45]: got exception: timeout ~$off [PYBOOT] [colombus 01:46]: Done. ======================================================================== Board colombus-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.097974] Key type id_legacy registered [ 0.098213] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.098224] io scheduler noop registered [ 0.098230] io scheduler deadline registered [ 0.098354] io scheduler cfq registered (default) [ 0.099929] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.143416] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.165271] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 32, base_baud = 1500000) is a U6_16550A [ 0.707578] console [ttyS0] enabled [ 0.711345] Serial: IMX driver [ 0.714796] serial: Freescale lpuart driver [ 0.719219] [drm] Initialized drm 1.1.0 20060810 [ 0.724765] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.731309] ehci-platform: EHCI generic platform driver [ 0.736572] ehci-omap: OMAP-EHCI Host Controller driver [ 0.741841] ehci-orion: EHCI orion driver [ 0.745883] SPEAr-ehci: EHCI SPEAr driver [ 0.749938] tegra-ehci: Tegra EHCI driver [ 0.754128] usbcore: registered new interface driver usb-storage [ 0.760853] mousedev: PS/2 mouse device common for all mice [ 0.767069] sdhci: Secure Digital Host Controller Interface driver [ 0.773263] sdhci: Copyright(c) Pierre Ossman [ 0.777759] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.783922] usbcore: registered new interface driver usbhid [ 0.789501] usbhid: USB HID core driver [ 0.793602] TCP: cubic registered [ 0.797424] NET: Registered protocol family 10 [ 0.802586] sit: IPv6 over IPv4 tunneling driver [ 0.807866] Key type dns_resolver registered [ 0.812291] Registering SWP/SWPB emulation handler [ 0.817517] regulator-dummy: disabling [ 0.821473] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.830526] Waiting for root device /dev/mmcblk0p1... [PYBOOT] [colombus 01:48]: Timed out waiting for "<type 'str'>": [PYBOOT] [colombus 01:49]: got exception: timeout ~$off [PYBOOT] [colombus 01:50]: Done. ======================================================================== Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- T ################################################################# ################################################################# ################################################################# ################################################## 546.9 KiB/s done Bytes transferred = 3585936 (36b790 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x82000000 queue/v3.12.23/multi_lpae_defconfig/dtbs/omap5-uevm.dtb tftp 0x82000000 queue/v3.12.23/multi_lpae_defconfig/dtbs/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.112 Filename 'queue/v3.12.23/multi_lpae_defconfig/dtbs/omap5-uevm.dtb'. Load address: 0x82000000 Loading: *T ## 2 KiB/s done Bytes transferred = 17789 (457d hex) U-Boot# bootz 0x81000000 - 0x82000000 ; bootm 0x81000000 - 0x82000000 [PYBOOT] [omap5uevm 00:41]: u-boot: jumping to kernel image bootz 0x81000000 - 0x82000000 ; bootm 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x36b790 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Using Device Tree in place at 82000000, end 8200757c Starting kernel ... [PYBOOT] [omap5uevm 00:42]: u-boot: started kernel. [PYBOOT] [omap5uevm 01:17]: Timed out waiting for "<type 'str'>": [PYBOOT] [omap5uevm 01:18]: got exception: timeout ~$off [PYBOOT] [omap5uevm 01:19]: Done. ======================================================================== Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- ################################################################# ################################################################# ################################################# 495.1 KiB/s done Bytes transferred = 3570768 (367c50 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x82000000 queue/v3.12.23/multi_v7_defconfig/dtbs/omap5-uevm.dtb tftp 0x82000000 queue/v3.12.23/multi_v7_defconfig/dtbs/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.112 Filename 'queue/v3.12.23/multi_v7_defconfig/dtbs/omap5-uevm.dtb'. Load address: 0x82000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ## 2.9 KiB/s done Bytes transferred = 17789 (457d hex) U-Boot# bootz 0x81000000 - 0x82000000 ; bootm 0x81000000 - 0x82000000 [PYBOOT] [omap5uevm 00:38]: u-boot: jumping to kernel image bootz 0x81000000 - 0x82000000 ; bootm 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x367c50 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Using Device Tree in place at 82000000, end 8200757c Starting kernel ... [PYBOOT] [omap5uevm 00:39]: u-boot: started kernel. [PYBOOT] [omap5uevm 01:14]: Timed out waiting for "<type 'str'>": [PYBOOT] [omap5uevm 01:15]: got exception: timeout ~$off [PYBOOT] [omap5uevm 01:16]: Done. ======================================================================== Board omap5uevm-omap2plus_defconfig failure log: ------------------------------------------------- ################################################################# ################################################################# ######################### 620.1 KiB/s done Bytes transferred = 4173448 (3fae88 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot#tftp 0x82000000 queue/v3.12.23/omap2plus_defconfig/dtbs/omap5-uevm.dtb tftp 0x82000000 queue/v3.12.23/omap2plus_defconfig/dtbs/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.112 Filename 'queue/v3.12.23/omap2plus_defconfig/dtbs/omap5-uevm.dtb'. Load address: 0x82000000 Loading: *EHCI timed out on TD - token=0x88008d80 T ## 2.9 KiB/s done Bytes transferred = 17789 (457d hex) U-Boot# bootz 0x81000000 - 0x82000000 ; bootm 0x81000000 - 0x82000000 [PYBOOT] [omap5uevm 00:41]: u-boot: jumping to kernel image bootz 0x81000000 - 0x82000000 ; bootm 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x3fae88 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Using Device Tree in place at 82000000, end 8200757c Starting kernel ... [PYBOOT] [omap5uevm 00:41]: u-boot: started kernel. [PYBOOT] [omap5uevm 01:16]: Timed out waiting for "<type 'str'>": [PYBOOT] [omap5uevm 01:17]: got exception: timeout ~$off [PYBOOT] [omap5uevm 01:18]: Done.

10 years, 5 months

queue build: 17 warnings 0 failures (queue/v3.12.23)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was queue, found at: Local queue of patches applied from http://git.kernel.org/cgit/linux/kernel/git/stable/stable-queue.git Topmost commit: 85ee5c0 Linux 3.12.23 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/queue/v3.12.23/ Runtime: 34m 28s Passed: 117 Failed: 0 Warnings: 17 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:589:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:599:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1092:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1166:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/cdma_hw.c:57:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/debug_hw.c:175:10: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' [-Wformat=] 1 drivers/tty/serial/imx.c:1542:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:120:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] Section mismatches:

10 years, 5 months

mainline boot: 64 boots: 62 pass, 2 fail (v3.16-rc2-110-g456febd)

by Kevin's boot bot

Full logs here: http://armcloud.us/kernel-ci/mainline/v3.16-rc2-110-g456febd Tree/Branch: mainline Git describe: v3.16-rc2-110-g456febd Failed boot tests ================= exynos5420-arndale-octa: FAIL: arm-exynos_defconfig http://armcloud.us/kernel-ci/mainline/v3.16-rc2-110-g456febd/arm-exynos_def… ste-snowball: FAIL: arm-u8500_defconfig http://armcloud.us/kernel-ci/mainline/v3.16-rc2-110-g456febd/arm-u8500_defc… Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 18.3 sec: PASS da850-evm 0 min 16.4 sec: PASS arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 18.5 sec: PASS tegra30-beaver 0 min 18.3 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 18.5 sec: PASS armada-xp-openblocks-ax3-4 0 min 24.5 sec: PASS omap5-uevm 1 min 43.1 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 13.5 sec: PASS arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 24.4 sec: PASS armada-370-mirabox 0 min 21.1 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 41.0 sec: PASS am335x-boneblack 0 min 23.0 sec: PASS omap3-beagle-xm 0 min 52.0 sec: PASS legacy,3530beagle 0 min 35.0 sec: PASS (Warnings: 1) omap4-panda 0 min 55.2 sec: PASS (Warnings: 1) omap3-overo-tobi 0 min 24.1 sec: PASS am335x-bone 0 min 24.8 sec: PASS omap3-overo-storm-tobi 0 min 23.2 sec: PASS omap5-uevm 0 min 57.4 sec: PASS (Warnings: 1) omap3-n900 0 min 17.7 sec: PASS legacy,n900 0 min 16.7 sec: PASS (Warnings: 1) omap4-panda-es 0 min 56.5 sec: PASS (Warnings: 1) legacy,3730storm 0 min 20.6 sec: PASS legacy,3530overo 0 min 22.1 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 16.1 sec: PASS am335x-boneblack 0 min 22.6 sec: PASS sun7i-a20-cubieboard2 0 min 13.1 sec: PASS sun4i-a10-cubieboard 0 min 17.9 sec: PASS exynos5410-smdk5410 0 min 31.6 sec: PASS am335x-bone 0 min 24.4 sec: PASS tegra124-jetson-tk1 0 min 21.0 sec: PASS armada-370-mirabox 0 min 22.3 sec: PASS omap4-panda 0 min 55.8 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 14.5 sec: PASS imx6dl-wandboard,wand-dual 0 min 15.7 sec: PASS ste-snowball 1 min 16.3 sec: PASS tegra30-beaver 0 min 25.1 sec: PASS omap3-n900 0 min 17.0 sec: PASS qcom-apq8074-dragonboard 0 min 20.2 sec: PASS bcm28155-ap 0 min 27.3 sec: PASS omap3-overo-tobi 0 min 22.9 sec: PASS omap3-overo-storm-tobi 0 min 25.2 sec: PASS omap3-beagle-xm 0 min 57.1 sec: PASS exynos5420-arndale-octa 0 min 40.5 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.4 sec: PASS omap5-uevm 1 min 35.7 sec: PASS (Warnings: 1) omap4-panda-es 0 min 49.2 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 37.3 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 11.8 sec: PASS sun4i-a10-cubieboard 0 min 12.0 sec: PASS arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard 0 min 18.4 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 23.5 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 37.7 sec: FAIL exynos5250-arndale 0 min 30.5 sec: PASS exynos5410-smdk5410 0 min 27.9 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 16.1 sec: PASS imx6dl-wandboard,wand-solo 0 min 16.2 sec: PASS imx6q-wandboard 0 min 15.0 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 1 min 50.4 sec: FAIL arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 27.0 sec: PASS armada-370-mirabox 0 min 23.1 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.7 sec: PASS armada-370-mirabox 0 min 20.6 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 16.1 sec: PASS (Warnings: 1)

10 years, 5 months

mainline boot: 40 passed 2 failed (mainline/v3.16-rc2-110-g456febd)

by Olof's autobooter

Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v3.16-rc2-110-g456febd/ Failed boards: capri bcm_defconfig : FAILED 1:43.90 snowball u8500_defconfig : FAILED 2:09.75 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:12.64 arndale exynos_defconfig : passed 1:15.99 arndale multi_v7_defconfig : passed 1:33.40 arndale multi_lpae_defconfig : passed 1:23.65 bbb omap2plus_defconfig : passed 1:29.18 bbb multi_v7_defconfig : passed 1:24.71 beaver tegra_defconfig : passed 1:07.36 beaver multi_v7_defconfig : passed 0:58.89 capri multi_v7_defconfig : passed 0:44.15 colombus sunxi_defconfig : passed 1:00.43 cubie sunxi_defconfig : passed 1:35.56 cubie multi_v7_defconfig : passed 1:34.03 cubie2 sunxi_defconfig : passed 1:24.42 cubie2 multi_v7_defconfig : passed 1:25.48 cubie2 multi_lpae_defconfig : passed 1:15.25 cubox multi_v7_defconfig : passed 1:07.32 dalmore tegra_defconfig : passed 1:33.78 dalmore multi_v7_defconfig : passed 1:24.16 dalmore multi_lpae_defconfig : passed 1:24.57 hummingboard imx_v6_v7_defconfig : passed 1:17.92 hummingboard multi_v7_defconfig : passed 1:11.82 jetsontk1 tegra_defconfig : passed 1:05.05 jetsontk1 multi_v7_defconfig : passed 0:55.60 jetsontk1 multi_lpae_defconfig : passed 0:58.51 omap5uevm omap2plus_defconfig : warnings 1:01.28 omap5uevm multi_v7_defconfig : warnings 1:53.89 omap5uevm multi_lpae_defconfig : warnings 2:04.81 panda omap2plus_defconfig : warnings 1:23.01 panda multi_v7_defconfig : warnings 1:43.20 sama5 sama5_defconfig : warnings 1:49.65 seaboard tegra_defconfig : passed 1:05.29 seaboard multi_v7_defconfig : passed 1:17.71 snow exynos_defconfig : passed 0:56.77 snow multi_v7_defconfig : passed 0:58.74 snow multi_lpae_defconfig : passed 0:54.59 snowball multi_v7_defconfig : passed 3:15.71 trimslice tegra_defconfig : passed 1:06.83 trimslice multi_v7_defconfig : passed 1:12.68 wandboard imx_v6_v7_defconfig : passed 1:17.98 wandboard multi_v7_defconfig : passed 1:11.52 Offline boards: colombus multi_v7_defconfig : OFFLINE 0:39.07 colombus multi_lpae_defconfig : OFFLINE 0:36.71 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board capri-bcm_defconfig failure log: ------------------------------------------------- [ 0.480000] vsr: at 1240 mV [ 0.480000] gpldo1: at 1200 mV [ 0.480000] gpldo2: at 3300 mV [ 0.490000] gpldo3: at 1200 mV [ 0.490000] gpldo4: at 1800 mV [ 0.490000] gpldo5: at 1200 mV [ 0.500000] gpldo6: at 3300 mV [ 0.500000] : no parameters [ 0.500000] : Failed to create debugfs directory [ 0.510000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.510000] sdhci: Secure Digital Host Controller Interface driver [ 0.520000] sdhci: Copyright(c) Pierre Ossman [ 0.520000] TCP: cubic registered [ 0.520000] NET: Registered protocol family 10 [ 0.530000] sit: IPv6 over IPv4 tunneling driver [ 0.530000] NET: Registered protocol family 17 [ 0.530000] NET: Registered protocol family 15 [ 0.540000] ThumbEE CPU extension supported. [ 0.540000] gpldo6: disabling [ 0.550000] gpldo5: disabling [ 0.550000] gpldo4: disabling [ 0.550000] gpldo3: disabling [ 0.560000] gpldo2: disabling [ 0.560000] gpldo1: disabling [ 0.560000] vsr: disabling [ 0.570000] sdsr2: disabling [ 0.570000] sdsr1: disabling [ 0.570000] msr: disabling [ 0.580000] iosr2: disabling [ 0.580000] csr: disabling [ 0.580000] mmcldo2: disabling [ 0.590000] mmcldo1: disabling [ 0.590000] Waiting for root device /dev/mmcblk0p8... [PYBOOT] [capri 01:41]: Timed out waiting for "<type 'str'>": [PYBOOT] [capri 01:42]: got exception: timeout ~$off [PYBOOT] [capri 01:43]: Done. ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.590332] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.597625] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.609130] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.616943] HS USB OTG: no transceiver configured [ 3.621673] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.629486] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.637420] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.649353] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.656677] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.668151] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.676727] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.688659] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.695983] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.707458] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.715270] HS USB OTG: no transceiver configured [ 3.719970] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.727813] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.735748] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.747680] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.755004] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.766479] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.775054] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.786987] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.794311] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.805786] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.813598] HS USB OTG: no transceiver configured [ 3.818328] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.826171] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.834106] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.846038] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.853332] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.864807] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.873382] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [PYBOOT] [snowball 02:07]: Timed out waiting for "<type 'str'>": [PYBOOT] [snowball 02:08]: got exception: timeout ~$off [PYBOOT] [snowball 02:09]: Done.

10 years, 5 months

← Newer
1
2
3
4
5
6
7
8
9
...
39
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports June 2014