Kernel-build-reports September 2014

kernel-build-reports@lists.linaro.org

27 participants
443 discussions

OMAP baseline test results for v3.17-rc7

by Paul Walmsley

Here are some basic OMAP test results for Linux v3.17-rc7. Logs and other details at: http://www.pwsan.com/omap/testlogs/test_v3.17-rc7/20140928222901/ Test summary ------------ Build: uImage: Pass ( 3/ 3): omap1_defconfig, omap1_defconfig_1510innovator_only, omap1_defconfig_5912osk_only Build: uImage+dtb: Pass (13/13): omap2plus_defconfig_am33xx_only/am335x-bone, omap2plus_defconfig/omap4-panda, omap2plus_defconfig/omap4-panda-es, omap2plus_defconfig/omap4-var-som, omap2plus_defconfig/omap3-evm-37xx, omap2plus_defconfig_n800_only_a/omap2420-n800, omap2plus_defconfig/omap2430-sdp, omap2plus_defconfig/am3517-evm, omap2plus_defconfig/omap3-beagle, omap2plus_defconfig/omap3-beagle-xm, omap2plus_defconfig/omap3-sbc-t3517, omap2plus_defconfig/omap5-uevm, omap2plus_defconfig/omap5-sbc-t54 Build: zImage: Pass (17/17): omap2plus_defconfig, omap2plus_defconfig_am33xx_only, omap2plus_defconfig_n800_only_a, omap2plus_defconfig_n800_multi_omap2xxx, omap2plus_defconfig_2430sdp_only, omap2plus_defconfig_cpupm, omap2plus_defconfig_no_pm, omap2plus_defconfig_omap2_4_only, omap2plus_defconfig_omap3_4_only, omap2plus_defconfig_omap5_only, omap2plus_defconfig_dra7xx_only, omap2plus_defconfig_am43xx_only, rmk_omap3430_ldp_oldconfig, rmk_omap3430_ldp_allnoconfig, rmk_omap4430_sdp_oldconfig, rmk_omap4430_sdp_allnoconfig, multi_v7_defconfig Boot to userspace: FAIL ( 1/17): 2430sdp skip ( 3/17): 5912osk, 4430es2panda, 3517evm Pass (13/17): am335xbonelt, am335xbone, 4460pandaes, 4460varsomom, 37xxevm, 3530es3beagle, 3530es31beagle, 3730beaglexm, 3730es12beaglexm, cmt3517, 5430es2uevm, 5430es2sbct54, 2420n800 PM: chip retention via suspend: skip ( 1/12): 4430es2panda FAIL ( 5/12): am335xbonelt, 4460varsomom, 2430sdp, 5430es2uevm, 5430es2sbct54 Pass ( 6/12): 4460pandaes, 37xxevm, 3530es3beagle, 3530es31beagle, 3730beaglexm, 3730es12beaglexm PM: chip retention via dynamic idle: skip ( 1/12): 4430es2panda FAIL ( 6/12): am335xbonelt, 4460pandaes, 4460varsomom, 2430sdp, 5430es2uevm, 5430es2sbct54 Pass ( 5/12): 37xxevm, 3530es3beagle, 3530es31beagle, 3730beaglexm, 3730es12beaglexm PM: chip off except CORE via suspend: Pass ( 1/ 1): 3730beaglexm PM: chip off except CORE via dynamic idle: Pass ( 1/ 1): 3730beaglexm PM: chip off via suspend: Pass ( 4/ 4): 37xxevm, 3530es3beagle, 3530es31beagle, 3730es12beaglexm PM: chip off via dynamic idle: Pass ( 4/ 4): 37xxevm, 3530es3beagle, 3530es31beagle, 3730es12beaglexm vmlinux object size (delta in bytes from test_v3.17-rc6 (0f33be009b89d2268e94194dc4fd01a7851b6d51)): text data bss total kernel -53 0 0 -53 omap1_defconfig +11 +32 0 +43 omap1_defconfig_1510innovator_only -21 0 0 -21 omap1_defconfig_5912osk_only +775 -8 0 +767 multi_v7_defconfig +551 0 0 +551 omap2plus_defconfig -5 0 0 -5 omap2plus_defconfig_2430sdp_only +391 0 0 +391 omap2plus_defconfig_am33xx_only +79 0 0 +79 omap2plus_defconfig_am43xx_only +551 0 0 +551 omap2plus_defconfig_cpupm +151 0 0 +151 omap2plus_defconfig_dra7xx_only -159 0 0 -159 omap2plus_defconfig_n800_multi_omap2xxx -159 +8 0 -151 omap2plus_defconfig_n800_only_a +547 0 0 +547 omap2plus_defconfig_no_pm +79 0 0 +79 omap2plus_defconfig_omap2_4_only +227 0 0 +227 omap2plus_defconfig_omap3_4_only +79 0 0 +79 omap2plus_defconfig_omap5_only +260 0 -60 +200 rmk_omap3430_ldp_allnoconfig +99 -8 0 +91 rmk_omap3430_ldp_oldconfig +48 0 +4 +52 rmk_omap4430_sdp_allnoconfig -23 -8 0 -31 rmk_omap4430_sdp_oldconfig Boot-time memory difference (delta in bytes from test_v3.17-rc6 (0f33be009b89d2268e94194dc4fd01a7851b6d51)) avail rsrvd high freed board kconfig -224768k -36352k . -404k 3517evm omap2plus_defconfig -484604k -38660k . -404k 4430es2panda omap2plus_defconfig -4k 4k . . am335xbonelt omap2plus_defconfig The 4430 Pandaboard and the 3517EVM have gone offline. These boards will require some additional investigation which probably won't happen until November. In the meantime, they've been moved to the "skip" column in the test results.

10 years, 2 months

v3.12.29 build: 2 failures 128 warnings (v3.12.29)

by Build bot for Mark Brown

Tree/Branch: v3.12.29 Git describe: v3.12.29 Commit: b45ddfa256 Linux 3.12.29 Build Time: 45 min 23 sec Passed: 6 / 8 ( 75.00 %) Failed: 2 / 8 ( 25.00 %) Errors: 33 Warnings: 128 Section Mismatches: 1 Failed defconfigs: arm-allmodconfig arm64-allmodconfig Errors: arm-allmodconfig /home/broonie/build/linux-stable/drivers/hwspinlock/omap_hwspinlock.c:158:2: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/hwmon/sht21.c:132:1: error: expected '=', ',', ';', 'asm' or '__attribute__' at end of input /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:8: error: 'struct smsc47m192_data' has no member named 'temp_' /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:4: error: expected ';' at end of input /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:4: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:4: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:4: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/hwmon/thmc50.c:416:39: error: expected '{' at end of input /home/broonie/build/linux-stable/drivers/hwmon/twl4030-madc-hwmon.c:123:1: error: expected identifier or '(' at end of input /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:137:28: error: 'struct sensor_device_attribute' has no member named 'dev_a' /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:137:2: error: expected '}' at end of input /home/broonie/build/linux-stable/drivers/hwmon/pmbus/pmbus.c:115:4: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/hwmon/pmbus/pmbus.c:115:4: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/hwmon/pmbus/pmbus.c:115:4: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/infiniband/core/mad_priv.h:36:0: error: unterminated #ifndef /home/broonie/build/linux-stable/drivers/infiniband/core/mad_rmpp.h:36:1: error: expected ':', ',', ';', '}' or '__attribute__' before 'enum' /home/broonie/build/linux-stable/drivers/infiniband/core/mad_priv.h:36:0: error: unterminated #ifndef /home/broonie/build/linux-stable/drivers/infiniband/core/agent.c:48:1: error: expected ':', ',', ';', '}' or '__attribute__' before 'struct' /home/broonie/build/linux-stable/drivers/infiniband/core/agent.c:128:3: error: missing terminating " character /home/broonie/build/linux-stable/drivers/infiniband/core/mad_priv.h:36:0: error: unterminated #ifndef /home/broonie/build/linux-stable/drivers/infiniband/core/mad_rmpp.h:36:1: error: expected ':', ',', ';', '}' or '__attribute__' before 'enum' /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:597:17: error: 'p' undeclared (first use in this function) /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:597:3: error: expected ')' at end of input /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:597:3: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:597:3: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:1148:29: error: 'stru' undeclared (first use in this function) /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:1148:7: error: expected ')' at end of input /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:1147:13: error: too few arguments to function 'kzalloc' /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:1148:7: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/infiniband/hw/amso1100/c2_cq.c:323:17: error: 'cpu_to_be6' undeclared (first use in this function) /home/broonie/build/linux-stable/drivers/infiniband/hw/amso1100/c2_cq.c:323:2: error: expected ';' at end of input /home/broonie/build/linux-stable/drivers/infiniband/hw/amso1100/c2_cq.c:323:2: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/infiniband/hw/amso1100/c2_cq.c:314:3: error: label 'bail1' used but not defined /home/broonie/build/linux-stable/drivers/infiniband/hw/amso1100/c2_cq.c:309:3: error: label 'bail0' used but not defined /home/broonie/build/linux-stable/drivers/infiniband/hw/mthca/mthca_mad.c:259:3: error: expected ';' at end of input /home/broonie/build/linux-stable/drivers/infiniband/hw/mthca/mthca_mad.c:259:3: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/infiniband/hw/mthca/mthca_mad.c:259:3: error: expected declaration or statement at end of input arm64-allmodconfig /home/broonie/build/linux-stable/drivers/hwmon/sht21.c:132:1: error: expected '=', ',', ';', 'asm' or '__attribute__' at end of input /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:8: error: 'struct smsc47m192_data' has no member named 'temp_' /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:4: error: expected ';' at end of input /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:4: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:4: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:4: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/hwmon/thmc50.c:416:39: error: expected '{' at end of input /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:137:28: error: 'struct sensor_device_attribute' has no member named 'dev_a' /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:137:2: error: expected '}' at end of input /home/broonie/build/linux-stable/drivers/hwmon/pmbus/pmbus.c:115:4: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/hwmon/pmbus/pmbus.c:115:4: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/hwmon/pmbus/pmbus.c:115:4: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:597:17: error: 'p' undeclared (first use in this function) /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:597:3: error: expected ')' at end of input /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:597:3: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:597:3: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/media/usb/b2c2/flexcop-usb.c:393:3: error: implicit declaration of function 'pci_free_consistent' [-Werror=implicit-function-declaration] /home/broonie/build/linux-stable/drivers/media/usb/b2c2/flexcop-usb.c:410:2: error: implicit declaration of function 'pci_alloc_consistent' [-Werror=implicit-function-declaration] /home/broonie/build/linux-stable/drivers/parport/parport_pc.c:67:25: fatal error: asm/parport.h: No such file or directory /home/broonie/build/linux-stable/drivers/staging/lustre/lustre/llite/lloop.c:527:78: error: duplicate case value /home/broonie/build/linux-stable/drivers/staging/lustre/lustre/llite/lloop.c:527:18: error: previously used here ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): 2 warnings 0 mismatches : x86_64-allnoconfig 87 warnings 1 mismatches : arm-allmodconfig 2 warnings 0 mismatches : arm64-defconfig 69 warnings 0 mismatches : arm64-allmodconfig 1 warnings 0 mismatches : x86_64-defconfig ------------------------------------------------------------------------------- Errors summary: 33 6 /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:4: error: expected declaration or statement at end of input 6 /home/broonie/build/linux-stable/drivers/hwmon/pmbus/pmbus.c:115:4: error: expected declaration or statement at end of input 4 /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:597:3: error: expected declaration or statement at end of input 3 /home/broonie/build/linux-stable/drivers/infiniband/core/mad_priv.h:36:0: error: unterminated #ifndef 2 /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:597:3: error: expected ')' at end of input 2 /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:597:17: error: 'p' undeclared (first use in this function) 2 /home/broonie/build/linux-stable/drivers/infiniband/hw/mthca/mthca_mad.c:259:3: error: expected declaration or statement at end of input 2 /home/broonie/build/linux-stable/drivers/infiniband/core/mad_rmpp.h:36:1: error: expected ':', ',', ';', '}' or '__attribute__' before 'enum' 2 /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:137:2: error: expected '}' at end of input 2 /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:137:28: error: 'struct sensor_device_attribute' has no member named 'dev_a' 2 /home/broonie/build/linux-stable/drivers/hwmon/thmc50.c:416:39: error: expected '{' at end of input 2 /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:8: error: 'struct smsc47m192_data' has no member named 'temp_' 2 /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:4: error: expected ';' at end of input 2 /home/broonie/build/linux-stable/drivers/hwmon/sht21.c:132:1: error: expected '=', ',', ';', 'asm' or '__attribute__' at end of input 1 /home/broonie/build/linux-stable/drivers/staging/lustre/lustre/llite/lloop.c:527:78: error: duplicate case value 1 /home/broonie/build/linux-stable/drivers/staging/lustre/lustre/llite/lloop.c:527:18: error: previously used here 1 /home/broonie/build/linux-stable/drivers/parport/parport_pc.c:67:25: fatal error: asm/parport.h: No such file or directory 1 /home/broonie/build/linux-stable/drivers/media/usb/b2c2/flexcop-usb.c:410:2: error: implicit declaration of function 'pci_alloc_consistent' [-Werror=implicit-function-declaration] 1 /home/broonie/build/linux-stable/drivers/media/usb/b2c2/flexcop-usb.c:393:3: error: implicit declaration of function 'pci_free_consistent' [-Werror=implicit-function-declaration] 1 /home/broonie/build/linux-stable/drivers/infiniband/hw/mthca/mthca_mad.c:259:3: error: expected ';' at end of input 1 /home/broonie/build/linux-stable/drivers/infiniband/hw/amso1100/c2_cq.c:323:2: error: expected declaration or statement at end of input 1 /home/broonie/build/linux-stable/drivers/infiniband/hw/amso1100/c2_cq.c:323:2: error: expected ';' at end of input 1 /home/broonie/build/linux-stable/drivers/infiniband/hw/amso1100/c2_cq.c:323:17: error: 'cpu_to_be6' undeclared (first use in this function) 1 /home/broonie/build/linux-stable/drivers/infiniband/hw/amso1100/c2_cq.c:314:3: error: label 'bail1' used but not defined 1 /home/broonie/build/linux-stable/drivers/infiniband/hw/amso1100/c2_cq.c:309:3: error: label 'bail0' used but not defined 1 /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:1148:7: error: expected declaration or statement at end of input 1 /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:1148:7: error: expected ')' at end of input 1 /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:1148:29: error: 'stru' undeclared (first use in this function) 1 /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:1147:13: error: too few arguments to function 'kzalloc' 1 /home/broonie/build/linux-stable/drivers/infiniband/core/agent.c:48:1: error: expected ':', ',', ';', '}' or '__attribute__' before 'struct' 1 /home/broonie/build/linux-stable/drivers/infiniband/core/agent.c:128:3: error: missing terminating " character 1 /home/broonie/build/linux-stable/drivers/hwspinlock/omap_hwspinlock.c:158:2: error: expected declaration or statement at end of input 1 /home/broonie/build/linux-stable/drivers/hwmon/twl4030-madc-hwmon.c:123:1: error: expected identifier or '(' at end of input Warnings Summary: 128 2 /home/broonie/build/linux-stable/net/core/secure_seq.c:30:4: warning: value computed is not used [-Wunused-value] 2 /home/broonie/build/linux-stable/drivers/net/ethernet/smsc/smc91x.c:1899:7: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 2 /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:597:3: warning: no return statement in function returning non-void [-Wreturn-type] 2 /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:583:6: warning: unused variable 'i' [-Wunused-variable] 2 /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:583:15: warning: unused variable 'v' [-Wunused-variable] 2 /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:583:12: warning: unused variable 'u' [-Wunused-variable] 2 /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:581:12: warning: 'analog_init_port' defined but not used [-Wunused-function] 2 /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:520:12: warning: 'analog_init_masks' defined but not used [-Wunused-function] 2 /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:428:12: warning: 'analog_init_device' defined but not used [-Wunused-function] 2 /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:307:13: warning: 'analog_poll' defined but not used [-Wunused-function] 2 /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:129:26: warning: 'wm831x_attributes' defined but not used [-Wunused-variable] 2 /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:126:39: warning: 'sensor_dev_attr_temp2_label' defined but not used [-Wunused-variable] 2 /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:124:39: warning: 'sensor_dev_attr_temp2_input' defined but not used [-Wunused-variable] 2 /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:118:39: warning: 'sensor_dev_attr_temp1_label' defined but not used [-Wunused-variable] 2 /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:116:39: warning: 'sensor_dev_attr_temp1_input' defined but not used [-Wunused-variable] 2 /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:114:39: warning: 'sensor_dev_attr_in8_input' defined but not used [-Wunused-variable] 2 /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:114:262: warning: 'sensor_dev_attr_in8_label' defined but not used [-Wunused-variable] 2 /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:113:39: warning: 'sensor_dev_attr_in7_input' defined but not used [-Wunused-variable] 2 /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:113:257: warning: 'sensor_dev_attr_in7_label' defined but not used [-Wunused-variable] 2 /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:112:39: warning: 'sensor_dev_attr_in6_input' defined but not used [-Wunused-variable] 2 /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:112:257: warning: 'sensor_dev_attr_in6_label' defined but not used [-Wunused-variable] 2 /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:111:39: warning: 'sensor_dev_attr_in5_input' defined but not used [-Wunused-variable] 2 /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:111:256: warning: 'sensor_dev_attr_in5_label' defined but not used [-Wunused-variable] 2 /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:110:259: warning: 'sensor_dev_attr_in4_label' defined but not used [-Wunused-variable] 2 /home/broonie/build/linux-stable/drivers/hwmon/thmc50.c:103:26: warning: 'thmc50_driver' defined but not used [-Wunused-variable] 2 /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:4: warning: no return statement in function returning non-void [-Wreturn-type] 2 /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:614:9: warning: unused variable 'config' [-Wunused-variable] 2 /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:128:26: warning: 'smsc47m192_driver' defined but not used [-Wunused-variable] 2 /home/broonie/build/linux-stable/drivers/hwmon/sht21.c:92:12: warning: 'sht21_update_measurements' defined but not used [-Wunused-function] 2 /home/broonie/build/linux-stable/drivers/hwmon/pmbus/pmbus.c:99:6: warning: unused variable 'ret' [-Wunused-variable] 2 /home/broonie/build/linux-stable/drivers/hwmon/pmbus/pmbus.c:96:12: warning: 'pmbus_identify' defined but not used [-Wunused-function] 2 /home/broonie/build/linux-stable/drivers/hwmon/pmbus/pmbus.c:33:13: warning: 'pmbus_find_sensor_groups' defined but not used [-Wunused-function] 2 /home/broonie/build/linux-stable/drivers/hwmon/pmbus/pmbus.c:115:4: warning: no return statement in function returning non-void [-Wreturn-type] 1 /home/broonie/build/linux-stable/sound/soc/fsl/imx-audmux.c:70:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable/sound/soc/fsl/imx-audmux.c:161:7: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 /home/broonie/build/linux-stable/net/sunrpc/xprtrdma/verbs.c:1774:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/net/netfilter/xt_connlimit.c:234:4: warning: value computed is not used [-Wunused-value] 1 /home/broonie/build/linux-stable/net/netfilter/nf_conntrack_core.c:674:3: warning: value computed is not used [-Wunused-value] 1 /home/broonie/build/linux-stable/drivers/video/xen-fbfront.c:589:8: warning: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'long long unsigned int' [-Wformat=] 1 /home/broonie/build/linux-stable/drivers/video/omap2/displays-new/panel-sony-acx565akm.c:608:25: warning: unused variable 'ddata' [-Wunused-variable] 1 /home/broonie/build/linux-stable/drivers/video/aty/radeon_pm.c:1718:13: warning: 'radeon_reinitialize_M10' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/usb/storage/realtek_cr.c:699:13: warning: 'fw5895_init' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/usb/storage/realtek_cr.c:629:12: warning: 'config_autodelink_before_power_down' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/tty/serial/efm32-uart.c:834:123: warning: 'efm32_uart_exit' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/staging/wlan-ng/prism2fw.c:795:1: warning: the frame size of 1072 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/drivers/staging/vt6655/iwctl.c:758:1: warning: the frame size of 1280 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/drivers/staging/vt6655/device_main.c:3257:1: warning: the frame size of 1864 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/drivers/staging/sm7xxfb/sm7xxfb.c:117:122: warning: 'sm7xx_vga_setup' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/staging/rts5139/rts51x.c:204:13: warning: 'rts51x_try_to_enter_ss' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/staging/dgnc/dgnc_tty.c:613:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/drivers/staging/dgap/dgap_tty.c:664:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/drivers/staging/dgap/dgap_fep5.c:173:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/drivers/staging/dgap/dgap_fep5.c:112:1: warning: the frame size of 1040 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/drivers/staging/dgap/dgap_driver.c:982:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/drivers/staging/bcm/CmHost.c:1440:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 /home/broonie/build/linux-stable/drivers/staging/bcm/CmHost.c:1426:37: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 /home/broonie/build/linux-stable/drivers/staging/bcm/CmHost.c:1387:39: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 /home/broonie/build/linux-stable/drivers/spi/spi-pl022.c:1423:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] 1 /home/broonie/build/linux-stable/drivers/spi/spi-gpio.c:252:8: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable/drivers/spi/spi-atmel.c:1460:18: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable/drivers/spi/spi-atmel.c:1335:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable/drivers/scsi/ips.c:210:2: warning: #warning "This driver has only been tested on the x86/ia64/x86_64 platforms" [-Wcpp] 1 /home/broonie/build/linux-stable/drivers/scsi/aic7xxx_old.c:8517:5: warning: case value '257' not in enumerated type 'ahc_chip' [-Wswitch] 1 /home/broonie/build/linux-stable/drivers/scsi/aic7xxx_old.c:8510:5: warning: case value '513' not in enumerated type 'ahc_chip' [-Wswitch] 1 /home/broonie/build/linux-stable/drivers/scsi/aic7xxx_old.c:7901:5: warning: case value '257' not in enumerated type 'ahc_chip' [-Wswitch] 1 /home/broonie/build/linux-stable/drivers/scsi/aic7xxx_old.c:7898:5: warning: case value '513' not in enumerated type 'ahc_chip' [-Wswitch] 1 /home/broonie/build/linux-stable/drivers/regulator/tps62360-regulator.c:363:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable/drivers/power/reset/xgene-reboot.c:80:17: warning: assignment from incompatible pointer type [enabled by default] 1 /home/broonie/build/linux-stable/drivers/power/pm2301_charger.c:725:4: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 /home/broonie/build/linux-stable/drivers/power/ab8500_charger.c:1559:4: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 /home/broonie/build/linux-stable/drivers/power/ab8500_charger.c:1390:4: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 /home/broonie/build/linux-stable/drivers/pinctrl/pinctrl-bcm2835.c:1060:2: warning: ignoring return value of 'gpiochip_remove', declared with attribute warn_unused_result [-Wunused-result] 1 /home/broonie/build/linux-stable/drivers/pinctrl/pinctrl-bcm2835.c:1043:3: warning: ignoring return value of 'gpiochip_remove', declared with attribute warn_unused_result [-Wunused-result] 1 /home/broonie/build/linux-stable/drivers/net/xen-netfront.c:1858:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] 1 /home/broonie/build/linux-stable/drivers/net/xen-netback/interface.c:241:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] 1 /home/broonie/build/linux-stable/drivers/net/wireless/ti/wlcore/spi.c:317:1: warning: the frame size of 9728 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/drivers/net/wireless/cw1200/sta.c:142:4: warning: value computed is not used [-Wunused-value] 1 /home/broonie/build/linux-stable/drivers/net/wireless/cw1200/scan.c:330:4: warning: value computed is not used [-Wunused-value] 1 /home/broonie/build/linux-stable/drivers/net/ethernet/dec/tulip/winbond-840.c:911:2: warning: #warning Processor architecture undefined [-Wcpp] 1 /home/broonie/build/linux-stable/drivers/net/ethernet/amd/nmclan_cs.c:625:3: warning: 'pcmcia_request_exclusive_irq' is deprecated (declared at /home/broonie/build/linux-stable/include/pcmcia/ds.h:213) [-Wdeprecated-declarations] 1 /home/broonie/build/linux-stable/drivers/mtd/nand/gpmi-nand/gpmi-nand.c:120:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/mtd/chips/cfi_cmdset_0020.c:654:1: warning: the frame size of 1192 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/drivers/misc/lkdtm.c:293:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/drivers/mfd/tps65217.c:173:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable/drivers/mfd/arizona-core.c:509:10: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable/drivers/media/usb/b2c2/flexcop-usb.c:410:21: warning: assignment makes pointer from integer without a cast [enabled by default] 1 /home/broonie/build/linux-stable/drivers/media/radio/radio-shark2.c:240:13: warning: 'shark_resume_leds' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/media/radio/radio-shark.c:274:13: warning: 'shark_resume_leds' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/isdn/hardware/mISDN/w6692.c:1181:75: warning: unsupported argument to '__builtin_return_address' 1 /home/broonie/build/linux-stable/drivers/isdn/hardware/mISDN/mISDNipac.c:759:75: warning: unsupported argument to '__builtin_return_address' 1 /home/broonie/build/linux-stable/drivers/input/misc/xen-kbdfront.c:258:8: warning: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'long long unsigned int' [-Wformat=] 1 /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:171:2: warning: #warning Precise timer not defined for this architecture. [-Wcpp] 1 /home/broonie/build/linux-stable/drivers/infiniband/hw/mthca/mthca_mad.c:259:3: warning: control reaches end of non-void function [-Wreturn-type] 1 /home/broonie/build/linux-stable/drivers/infiniband/hw/mthca/mthca_mad.c:148:13: warning: 'node_desc_override' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/infiniband/hw/mthca/mthca_mad.c:105:13: warning: 'smp_snoop' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/infiniband/hw/cxgb4/mem.c:79:25: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable/drivers/infiniband/hw/amso1100/c2_cq.c:323:2: warning: control reaches end of non-void function [-Wreturn-type] 1 /home/broonie/build/linux-stable/drivers/infiniband/hw/amso1100/c2_cq.c:291:16: warning: unused variable 'peer_pa' [-Wunused-variable] 1 /home/broonie/build/linux-stable/drivers/infiniband/hw/amso1100/c2_cq.c:290:29: warning: unused variable 'reply' [-Wunused-variable] 1 /home/broonie/build/linux-stable/drivers/infiniband/hw/amso1100/c2_cq.c:257:13: warning: 'c2_free_cq_buf' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:981:38: warning: 'class_attr_abi_version' defined but not used [-Wunused-variable] 1 /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:951:25: warning: 'umad_client' defined but not used [-Wunused-variable] 1 /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:145:25: warning: 'ib_umad_dev_ktype' defined but not used [-Wunused-variable] 1 /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:135:13: warning: 'ib_umad_remove_one' used but never defined 1 /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:1135:12: warning: unused variable 'i' [-Wunused-variable] 1 /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:1096:13: warning: 'ib_umad_kill_port' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:1006:12: warning: 'ib_umad_init_port' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/infiniband/core/agent.c:128:24: warning: missing terminating " character 1 /home/broonie/build/linux-stable/drivers/iio/adc/exynos_adc.c:112:9: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable/drivers/hwspinlock/omap_hwspinlock.c:81:12: warning: 'omap_hwspinlock_probe' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/hwspinlock/omap_hwspinlock.c:145:12: warning: 'omap_hwspinlock_remove' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/hwmon/twl4030-madc-hwmon.c:99:12: warning: 'twl4030_madc_hwmon_probe' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/hwmon/thmc50.c:94:28: warning: 'thmc50_update_device' used but never defined [enabled by default] 1 /home/broonie/build/linux-stable/drivers/hwmon/thmc50.c:94:28: warning: 'thmc50_update_device' used but never defined 1 /home/broonie/build/linux-stable/drivers/gpu/drm/radeon/ni_dpm.c:3448:31: warning: unused variable 'eg_pi' [-Wunused-variable] 1 /home/broonie/build/linux-stable/drivers/gpu/drm/radeon/cypress_dpm.c:302:31: warning: unused variable 'eg_pi' [-Wunused-variable] 1 /home/broonie/build/linux-stable/drivers/gpio/gpio-mcp23s08.c:643:10: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable/drivers/dma/pl330.c:2317:21: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable/drivers/dma/amba-pl08x.c:1693:2: warning: format '%d' expects argument of type 'int', but argument 6 has type 'size_t' [-Wformat=] 1 /home/broonie/build/linux-stable/drivers/dma/amba-pl08x.c:1693:2: warning: format '%d' expects argument of type 'int', but argument 5 has type 'size_t' [-Wformat=] 1 /home/broonie/build/linux-stable/drivers/dma/amba-pl08x.c:1041:4: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'size_t' [-Wformat=] 1 /home/broonie/build/linux-stable/drivers/char/hw_random/via-rng.c:224:26: warning: 'via_rng_cpu_id' defined but not used [-Wunused-variable] 1 /home/broonie/build/linux-stable/drivers/block/mtip32xx/mtip32xx.c:2921:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/drivers/block/mtip32xx/mtip32xx.c:2898:1: warning: the frame size of 1040 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/drivers/block/mtip32xx/mtip32xx.c:2827:1: warning: the frame size of 1080 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/drivers/base/topology.c:86:106: warning: unused variable 'cpu' [-Wunused-variable] 1 /home/broonie/build/linux-stable/drivers/base/topology.c:83:118: warning: unused variable 'cpu' [-Wunused-variable] 1 /home/broonie/build/linux-stable/arch/arm/mach-cns3xxx/pcie.c:350:1: warning: the frame size of 1072 bytes is larger than 1024 bytes [-Wframe-larger-than=] Section Mismatch Summary: 1 1 WARNING: drivers/cpuidle/built-in.o(.data+0x938): Section mismatch in reference from the variable dbx500_cpuidle_plat_driver to the function .init.text:dbx500_cpuidle_probe() =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- x86_64-allnoconfig : PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: /home/broonie/build/linux-stable/drivers/base/topology.c:83:118: warning: unused variable 'cpu' [-Wunused-variable] /home/broonie/build/linux-stable/drivers/base/topology.c:86:106: warning: unused variable 'cpu' [-Wunused-variable] ------------------------------------------------------------------------------- arm-allmodconfig : FAIL, 37 errors, 87 warnings, 1 section mismatches Errors: /home/broonie/build/linux-stable/drivers/hwspinlock/omap_hwspinlock.c:158:2: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/hwmon/sht21.c:132:1: error: expected '=', ',', ';', 'asm' or '__attribute__' at end of input /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:8: error: 'struct smsc47m192_data' has no member named 'temp_' /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:4: error: expected ';' at end of input /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:4: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:4: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:4: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/hwmon/thmc50.c:416:39: error: expected '{' at end of input /home/broonie/build/linux-stable/drivers/hwmon/twl4030-madc-hwmon.c:123:1: error: expected identifier or '(' at end of input /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:137:28: error: 'struct sensor_device_attribute' has no member named 'dev_a' /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:137:2: error: expected '}' at end of input /home/broonie/build/linux-stable/drivers/hwmon/pmbus/pmbus.c:115:4: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/hwmon/pmbus/pmbus.c:115:4: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/hwmon/pmbus/pmbus.c:115:4: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/infiniband/core/mad_priv.h:36:0: error: unterminated #ifndef /home/broonie/build/linux-stable/drivers/infiniband/core/mad_rmpp.h:36:1: error: expected ':', ',', ';', '}' or '__attribute__' before 'enum' /home/broonie/build/linux-stable/drivers/infiniband/core/mad_priv.h:36:0: error: unterminated #ifndef /home/broonie/build/linux-stable/drivers/infiniband/core/agent.c:48:1: error: expected ':', ',', ';', '}' or '__attribute__' before 'struct' /home/broonie/build/linux-stable/drivers/infiniband/core/agent.c:128:3: error: missing terminating " character /home/broonie/build/linux-stable/drivers/infiniband/core/mad_priv.h:36:0: error: unterminated #ifndef /home/broonie/build/linux-stable/drivers/infiniband/core/mad_rmpp.h:36:1: error: expected ':', ',', ';', '}' or '__attribute__' before 'enum' /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:597:17: error: 'p' undeclared (first use in this function) /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:597:3: error: expected ')' at end of input /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:597:3: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:597:3: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:1148:29: error: 'stru' undeclared (first use in this function) /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:1148:7: error: expected ')' at end of input /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:1147:13: error: too few arguments to function 'kzalloc' /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:1148:7: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/infiniband/hw/amso1100/c2_cq.c:323:17: error: 'cpu_to_be6' undeclared (first use in this function) /home/broonie/build/linux-stable/drivers/infiniband/hw/amso1100/c2_cq.c:323:2: error: expected ';' at end of input /home/broonie/build/linux-stable/drivers/infiniband/hw/amso1100/c2_cq.c:323:2: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/infiniband/hw/amso1100/c2_cq.c:314:3: error: label 'bail1' used but not defined /home/broonie/build/linux-stable/drivers/infiniband/hw/amso1100/c2_cq.c:309:3: error: label 'bail0' used but not defined /home/broonie/build/linux-stable/drivers/infiniband/hw/mthca/mthca_mad.c:259:3: error: expected ';' at end of input /home/broonie/build/linux-stable/drivers/infiniband/hw/mthca/mthca_mad.c:259:3: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/infiniband/hw/mthca/mthca_mad.c:259:3: error: expected declaration or statement at end of input Warnings: /home/broonie/build/linux-stable/arch/arm/mach-cns3xxx/pcie.c:350:1: warning: the frame size of 1072 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/block/mtip32xx/mtip32xx.c:2898:1: warning: the frame size of 1040 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/block/mtip32xx/mtip32xx.c:2921:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/block/mtip32xx/mtip32xx.c:2827:1: warning: the frame size of 1080 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/gpu/drm/radeon/cypress_dpm.c:302:31: warning: unused variable 'eg_pi' [-Wunused-variable] /home/broonie/build/linux-stable/drivers/gpu/drm/radeon/ni_dpm.c:3448:31: warning: unused variable 'eg_pi' [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwspinlock/omap_hwspinlock.c:81:12: warning: 'omap_hwspinlock_probe' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/hwspinlock/omap_hwspinlock.c:145:12: warning: 'omap_hwspinlock_remove' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/hwmon/sht21.c:92:12: warning: 'sht21_update_measurements' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:614:9: warning: unused variable 'config' [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:4: warning: no return statement in function returning non-void [-Wreturn-type] /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:128:26: warning: 'smsc47m192_driver' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/thmc50.c:94:28: warning: 'thmc50_update_device' used but never defined /home/broonie/build/linux-stable/drivers/hwmon/thmc50.c:103:26: warning: 'thmc50_driver' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/twl4030-madc-hwmon.c:99:12: warning: 'twl4030_madc_hwmon_probe' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:110:259: warning: 'sensor_dev_attr_in4_label' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:111:39: warning: 'sensor_dev_attr_in5_input' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:111:256: warning: 'sensor_dev_attr_in5_label' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:112:39: warning: 'sensor_dev_attr_in6_input' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:112:257: warning: 'sensor_dev_attr_in6_label' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:113:39: warning: 'sensor_dev_attr_in7_input' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:113:257: warning: 'sensor_dev_attr_in7_label' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:114:39: warning: 'sensor_dev_attr_in8_input' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:114:262: warning: 'sensor_dev_attr_in8_label' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:116:39: warning: 'sensor_dev_attr_temp1_input' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:118:39: warning: 'sensor_dev_attr_temp1_label' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:124:39: warning: 'sensor_dev_attr_temp2_input' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:126:39: warning: 'sensor_dev_attr_temp2_label' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:129:26: warning: 'wm831x_attributes' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/pmbus/pmbus.c:99:6: warning: unused variable 'ret' [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/pmbus/pmbus.c:115:4: warning: no return statement in function returning non-void [-Wreturn-type] /home/broonie/build/linux-stable/drivers/hwmon/pmbus/pmbus.c:33:13: warning: 'pmbus_find_sensor_groups' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/hwmon/pmbus/pmbus.c:96:12: warning: 'pmbus_identify' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/infiniband/core/agent.c:128:24: warning: missing terminating " character /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:583:15: warning: unused variable 'v' [-Wunused-variable] /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:583:12: warning: unused variable 'u' [-Wunused-variable] /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:583:6: warning: unused variable 'i' [-Wunused-variable] /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:597:3: warning: no return statement in function returning non-void [-Wreturn-type] /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:307:13: warning: 'analog_poll' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:428:12: warning: 'analog_init_device' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:520:12: warning: 'analog_init_masks' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:581:12: warning: 'analog_init_port' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:1135:12: warning: unused variable 'i' [-Wunused-variable] /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:135:13: warning: 'ib_umad_remove_one' used but never defined /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:145:25: warning: 'ib_umad_dev_ktype' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:951:25: warning: 'umad_client' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:981:38: warning: 'class_attr_abi_version' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:1006:12: warning: 'ib_umad_init_port' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:1096:13: warning: 'ib_umad_kill_port' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/infiniband/hw/amso1100/c2_cq.c:291:16: warning: unused variable 'peer_pa' [-Wunused-variable] /home/broonie/build/linux-stable/drivers/infiniband/hw/amso1100/c2_cq.c:290:29: warning: unused variable 'reply' [-Wunused-variable] /home/broonie/build/linux-stable/drivers/infiniband/hw/amso1100/c2_cq.c:257:13: warning: 'c2_free_cq_buf' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/infiniband/hw/amso1100/c2_cq.c:323:2: warning: control reaches end of non-void function [-Wreturn-type] /home/broonie/build/linux-stable/drivers/infiniband/hw/cxgb4/mem.c:79:25: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable/drivers/infiniband/hw/mthca/mthca_mad.c:105:13: warning: 'smp_snoop' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/infiniband/hw/mthca/mthca_mad.c:148:13: warning: 'node_desc_override' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/infiniband/hw/mthca/mthca_mad.c:259:3: warning: control reaches end of non-void function [-Wreturn-type] /home/broonie/build/linux-stable/drivers/isdn/hardware/mISDN/w6692.c:1181:75: warning: unsupported argument to '__builtin_return_address' /home/broonie/build/linux-stable/drivers/isdn/hardware/mISDN/mISDNipac.c:759:75: warning: unsupported argument to '__builtin_return_address' /home/broonie/build/linux-stable/net/sunrpc/xprtrdma/verbs.c:1774:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/misc/lkdtm.c:293:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/mtd/chips/cfi_cmdset_0020.c:654:1: warning: the frame size of 1192 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/mtd/nand/gpmi-nand/gpmi-nand.c:120:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/net/ethernet/amd/nmclan_cs.c:625:3: warning: 'pcmcia_request_exclusive_irq' is deprecated (declared at /home/broonie/build/linux-stable/include/pcmcia/ds.h:213) [-Wdeprecated-declarations] /home/broonie/build/linux-stable/drivers/power/ab8500_charger.c:1390:4: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] /home/broonie/build/linux-stable/drivers/power/ab8500_charger.c:1559:4: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] /home/broonie/build/linux-stable/drivers/pinctrl/pinctrl-bcm2835.c:1060:2: warning: ignoring return value of 'gpiochip_remove', declared with attribute warn_unused_result [-Wunused-result] /home/broonie/build/linux-stable/drivers/pinctrl/pinctrl-bcm2835.c:1043:3: warning: ignoring return value of 'gpiochip_remove', declared with attribute warn_unused_result [-Wunused-result] /home/broonie/build/linux-stable/drivers/power/pm2301_charger.c:725:4: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] /home/broonie/build/linux-stable/drivers/net/ethernet/dec/tulip/winbond-840.c:911:2: warning: #warning Processor architecture undefined [-Wcpp] /home/broonie/build/linux-stable/drivers/staging/dgap/dgap_driver.c:982:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/staging/dgap/dgap_fep5.c:173:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/staging/dgap/dgap_fep5.c:112:1: warning: the frame size of 1040 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/staging/dgap/dgap_tty.c:664:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/staging/dgnc/dgnc_tty.c:613:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/scsi/aic7xxx_old.c:7901:5: warning: case value '257' not in enumerated type 'ahc_chip' [-Wswitch] /home/broonie/build/linux-stable/drivers/scsi/aic7xxx_old.c:7898:5: warning: case value '513' not in enumerated type 'ahc_chip' [-Wswitch] /home/broonie/build/linux-stable/drivers/scsi/aic7xxx_old.c:8517:5: warning: case value '257' not in enumerated type 'ahc_chip' [-Wswitch] /home/broonie/build/linux-stable/drivers/scsi/aic7xxx_old.c:8510:5: warning: case value '513' not in enumerated type 'ahc_chip' [-Wswitch] /home/broonie/build/linux-stable/drivers/scsi/ips.c:210:2: warning: #warning "This driver has only been tested on the x86/ia64/x86_64 platforms" [-Wcpp] /home/broonie/build/linux-stable/drivers/tty/serial/efm32-uart.c:834:123: warning: 'efm32_uart_exit' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/video/aty/radeon_pm.c:1718:13: warning: 'radeon_reinitialize_M10' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/video/omap2/displays-new/panel-sony-acx565akm.c:608:25: warning: unused variable 'ddata' [-Wunused-variable] /home/broonie/build/linux-stable/drivers/staging/sm7xxfb/sm7xxfb.c:117:122: warning: 'sm7xx_vga_setup' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/staging/vt6655/device_main.c:3257:1: warning: the frame size of 1864 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/staging/vt6655/iwctl.c:758:1: warning: the frame size of 1280 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/staging/wlan-ng/prism2fw.c:795:1: warning: the frame size of 1072 bytes is larger than 1024 bytes [-Wframe-larger-than=] Section Mismatches: WARNING: drivers/cpuidle/built-in.o(.data+0x938): Section mismatch in reference from the variable dbx500_cpuidle_plat_driver to the function .init.text:dbx500_cpuidle_probe() ------------------------------------------------------------------------------- arm64-defconfig : PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: /home/broonie/build/linux-stable/net/core/secure_seq.c:30:4: warning: value computed is not used [-Wunused-value] /home/broonie/build/linux-stable/drivers/net/ethernet/smsc/smc91x.c:1899:7: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] ------------------------------------------------------------------------------- arm64-allmodconfig : FAIL, 21 errors, 69 warnings, 0 section mismatches Errors: /home/broonie/build/linux-stable/drivers/hwmon/sht21.c:132:1: error: expected '=', ',', ';', 'asm' or '__attribute__' at end of input /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:8: error: 'struct smsc47m192_data' has no member named 'temp_' /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:4: error: expected ';' at end of input /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:4: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:4: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:4: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/hwmon/thmc50.c:416:39: error: expected '{' at end of input /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:137:28: error: 'struct sensor_device_attribute' has no member named 'dev_a' /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:137:2: error: expected '}' at end of input /home/broonie/build/linux-stable/drivers/hwmon/pmbus/pmbus.c:115:4: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/hwmon/pmbus/pmbus.c:115:4: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/hwmon/pmbus/pmbus.c:115:4: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:597:17: error: 'p' undeclared (first use in this function) /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:597:3: error: expected ')' at end of input /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:597:3: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:597:3: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/media/usb/b2c2/flexcop-usb.c:393:3: error: implicit declaration of function 'pci_free_consistent' [-Werror=implicit-function-declaration] /home/broonie/build/linux-stable/drivers/media/usb/b2c2/flexcop-usb.c:410:2: error: implicit declaration of function 'pci_alloc_consistent' [-Werror=implicit-function-declaration] /home/broonie/build/linux-stable/drivers/parport/parport_pc.c:67:25: fatal error: asm/parport.h: No such file or directory /home/broonie/build/linux-stable/drivers/staging/lustre/lustre/llite/lloop.c:527:78: error: duplicate case value /home/broonie/build/linux-stable/drivers/staging/lustre/lustre/llite/lloop.c:527:18: error: previously used here Warnings: /home/broonie/build/linux-stable/drivers/dma/amba-pl08x.c:1041:4: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'size_t' [-Wformat=] /home/broonie/build/linux-stable/drivers/dma/amba-pl08x.c:1693:2: warning: format '%d' expects argument of type 'int', but argument 5 has type 'size_t' [-Wformat=] /home/broonie/build/linux-stable/drivers/dma/amba-pl08x.c:1693:2: warning: format '%d' expects argument of type 'int', but argument 6 has type 'size_t' [-Wformat=] /home/broonie/build/linux-stable/drivers/dma/pl330.c:2317:21: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable/sound/soc/fsl/imx-audmux.c:70:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable/sound/soc/fsl/imx-audmux.c:161:7: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] /home/broonie/build/linux-stable/drivers/gpio/gpio-mcp23s08.c:643:10: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable/net/core/secure_seq.c:30:4: warning: value computed is not used [-Wunused-value] /home/broonie/build/linux-stable/drivers/iio/adc/exynos_adc.c:112:9: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable/drivers/hwmon/sht21.c:92:12: warning: 'sht21_update_measurements' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:614:9: warning: unused variable 'config' [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:4: warning: no return statement in function returning non-void [-Wreturn-type] /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:128:26: warning: 'smsc47m192_driver' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/thmc50.c:94:28: warning: 'thmc50_update_device' used but never defined [enabled by default] /home/broonie/build/linux-stable/drivers/hwmon/thmc50.c:103:26: warning: 'thmc50_driver' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:110:259: warning: 'sensor_dev_attr_in4_label' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:111:39: warning: 'sensor_dev_attr_in5_input' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:111:256: warning: 'sensor_dev_attr_in5_label' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:112:39: warning: 'sensor_dev_attr_in6_input' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:112:257: warning: 'sensor_dev_attr_in6_label' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:113:39: warning: 'sensor_dev_attr_in7_input' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:113:257: warning: 'sensor_dev_attr_in7_label' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:114:39: warning: 'sensor_dev_attr_in8_input' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:114:262: warning: 'sensor_dev_attr_in8_label' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:116:39: warning: 'sensor_dev_attr_temp1_input' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:118:39: warning: 'sensor_dev_attr_temp1_label' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:124:39: warning: 'sensor_dev_attr_temp2_input' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:126:39: warning: 'sensor_dev_attr_temp2_label' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:129:26: warning: 'wm831x_attributes' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/pmbus/pmbus.c:99:6: warning: unused variable 'ret' [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/pmbus/pmbus.c:115:4: warning: no return statement in function returning non-void [-Wreturn-type] /home/broonie/build/linux-stable/drivers/hwmon/pmbus/pmbus.c:33:13: warning: 'pmbus_find_sensor_groups' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/hwmon/pmbus/pmbus.c:96:12: warning: 'pmbus_identify' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:171:2: warning: #warning Precise timer not defined for this architecture. [-Wcpp] /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:583:15: warning: unused variable 'v' [-Wunused-variable] /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:583:12: warning: unused variable 'u' [-Wunused-variable] /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:583:6: warning: unused variable 'i' [-Wunused-variable] /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:597:3: warning: no return statement in function returning non-void [-Wreturn-type] /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:307:13: warning: 'analog_poll' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:428:12: warning: 'analog_init_device' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:520:12: warning: 'analog_init_masks' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:581:12: warning: 'analog_init_port' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/input/misc/xen-kbdfront.c:258:8: warning: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'long long unsigned int' [-Wformat=] /home/broonie/build/linux-stable/drivers/mfd/arizona-core.c:509:10: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable/drivers/mfd/tps65217.c:173:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable/drivers/media/radio/radio-shark.c:274:13: warning: 'shark_resume_leds' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/media/radio/radio-shark2.c:240:13: warning: 'shark_resume_leds' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/net/netfilter/nf_conntrack_core.c:674:3: warning: value computed is not used [-Wunused-value] /home/broonie/build/linux-stable/drivers/media/usb/b2c2/flexcop-usb.c:410:21: warning: assignment makes pointer from integer without a cast [enabled by default] /home/broonie/build/linux-stable/net/netfilter/xt_connlimit.c:234:4: warning: value computed is not used [-Wunused-value] /home/broonie/build/linux-stable/drivers/net/ethernet/smsc/smc91x.c:1899:7: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable/drivers/power/reset/xgene-reboot.c:80:17: warning: assignment from incompatible pointer type [enabled by default] /home/broonie/build/linux-stable/drivers/regulator/tps62360-regulator.c:363:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable/drivers/spi/spi-atmel.c:1335:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable/drivers/spi/spi-atmel.c:1460:18: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable/drivers/spi/spi-gpio.c:252:8: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable/drivers/spi/spi-pl022.c:1423:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] /home/broonie/build/linux-stable/drivers/net/wireless/cw1200/sta.c:142:4: warning: value computed is not used [-Wunused-value] /home/broonie/build/linux-stable/drivers/net/wireless/cw1200/scan.c:330:4: warning: value computed is not used [-Wunused-value] /home/broonie/build/linux-stable/drivers/staging/bcm/CmHost.c:1387:39: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] /home/broonie/build/linux-stable/drivers/staging/bcm/CmHost.c:1426:37: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] /home/broonie/build/linux-stable/drivers/staging/bcm/CmHost.c:1440:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] /home/broonie/build/linux-stable/drivers/net/wireless/ti/wlcore/spi.c:317:1: warning: the frame size of 9728 bytes is larger than 2048 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/net/xen-netback/interface.c:241:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] /home/broonie/build/linux-stable/drivers/net/xen-netfront.c:1858:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] /home/broonie/build/linux-stable/drivers/staging/rts5139/rts51x.c:204:13: warning: 'rts51x_try_to_enter_ss' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/usb/storage/realtek_cr.c:629:12: warning: 'config_autodelink_before_power_down' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/usb/storage/realtek_cr.c:699:13: warning: 'fw5895_init' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/video/xen-fbfront.c:589:8: warning: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'long long unsigned int' [-Wformat=] ------------------------------------------------------------------------------- x86_64-defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: /home/broonie/build/linux-stable/drivers/char/hw_random/via-rng.c:224:26: warning: 'via_rng_cpu_id' defined but not used [-Wunused-variable] ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: arm64-allnoconfig arm-allnoconfig arm-multi_v7_defconfig

10 years, 2 months

queue boot: 24 passed 7 failed (queue/v3.12.29)

by Olof's autobooter

Full logs are available at http://arm-soc.lixom.net/bootlogs/queue/v3.12.29/ Failed boards: bbb arm-omap2plus_defconfig : FAILED 1:59.36 bbb arm-multi_v7_defconfig : FAILED 1:48.68 colombus arm-multi_v7_defconfig : FAILED 1:52.43 colombus arm-multi_lpae_defconfig : FAILED 1:50.77 omap5uevm arm-omap2plus_defconfig : FAILED 1:16.14 omap5uevm arm-multi_v7_defconfig : FAILED 1:12.14 omap5uevm arm-multi_lpae_defconfig : FAILED 1:12.31 Successful boards: arndale arm-exynos_defconfig : passed 1:18.30 beaver arm-tegra_defconfig : passed 1:02.35 beaver arm-multi_v7_defconfig : passed 0:40.54 capri arm-bcm_defconfig : passed 0:38.21 capri arm-multi_v7_defconfig : passed 0:38.09 cubie arm-multi_v7_defconfig : passed 0:58.58 cubie2 arm-multi_v7_defconfig : passed 1:04.30 cubie2 arm-multi_lpae_defconfig : passed 0:49.09 cubox arm-dove_defconfig : passed 1:37.17 dalmore arm-tegra_defconfig : passed 1:13.42 dalmore arm-multi_v7_defconfig : passed 1:36.79 dalmore arm-multi_lpae_defconfig : passed 0:54.14 pandaes arm-omap2plus_defconfig : passed 1:26.85 pandaes arm-multi_v7_defconfig : passed 1:29.51 sama5 arm-sama5_defconfig : passed 2:00.68 seaboard arm-tegra_defconfig : passed 1:00.34 seaboard arm-multi_v7_defconfig : passed 0:52.02 snow arm-exynos_defconfig : passed 1:36.77 snowball arm-u8500_defconfig : passed 2:12.67 snowball arm-multi_v7_defconfig : passed 0:56.92 trimslice arm-tegra_defconfig : passed 1:04.82 trimslice arm-multi_v7_defconfig : passed 0:44.70 wandboard arm-imx_v6_v7_defconfig : passed 0:52.15 wandboard arm-multi_v7_defconfig : passed 0:40.54 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board bbb-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.263247] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.263267] io scheduler noop registered [ 0.263278] io scheduler deadline registered [ 0.263523] io scheduler cfq registered (default) [ 0.264388] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 0.342499] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.344400] Serial: IMX driver [ 0.345362] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 0.937193] console [ttyO0] enabled [ 0.942008] serial: Freescale lpuart driver [ 0.946797] [drm] Initialized drm 1.1.0 20060810 [ 0.953730] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.960667] ehci-platform: EHCI generic platform driver [ 0.966286] ehci-omap: OMAP-EHCI Host Controller driver [ 0.971913] ehci-orion: EHCI orion driver [ 0.976226] SPEAr-ehci: EHCI SPEAr driver [ 0.980582] tegra-ehci: Tegra EHCI driver [ 0.985155] usbcore: registered new interface driver usb-storage [ 0.992991] mousedev: PS/2 mouse device common for all mice [ 1.000257] sdhci: Secure Digital Host Controller Interface driver [ 1.006777] sdhci: Copyright(c) Pierre Ossman [ 1.011796] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.018750] usbcore: registered new interface driver usbhid [ 1.024673] usbhid: USB HID core driver [ 1.029119] TCP: cubic registered [ 1.033534] NET: Registered protocol family 10 [ 1.039278] sit: IPv6 over IPv4 tunneling driver [ 1.045289] Key type dns_resolver registered [ 1.049991] Registering SWP/SWPB emulation handler [ 1.055889] regulator-dummy: disabling [ 1.061326] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.067322] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.077453] Waiting for root device /dev/mmcblk0p2... [PYBOOT] [bbb 01:46]: Timed out waiting for "<type 'str'>": [PYBOOT] [bbb 01:47]: got exception: timeout ~$off [PYBOOT] [bbb 01:48]: Done. ======================================================================== Board bbb-arm-omap2plus_defconfig failure log: ------------------------------------------------- [ 1.872179] of_get_named_gpio_flags exited with status 53 [ 1.880112] of_get_named_gpio_flags exited with status 54 [ 1.887008] of_get_named_gpio_flags exited with status 55 [ 1.893658] of_get_named_gpio_flags exited with status 56 [ 1.902731] ledtrig-cpu: registered to indicate activity on CPUs [ 1.911464] usbcore: registered new interface driver usbhid [ 1.917344] usbhid: USB HID core driver [ 1.923472] oprofile: no performance counters [ 1.931306] oprofile: using timer interrupt. [ 1.936754] TCP: cubic registered [ 1.940257] Initializing XFRM netlink socket [ 1.945071] NET: Registered protocol family 17 [ 1.949870] NET: Registered protocol family 15 [ 1.955143] Key type dns_resolver registered [ 1.959798] ThumbEE CPU extension supported. [ 1.964432] Registering SWP/SWPB emulation handler [ 1.974760] regulator-dummy: disabling [ 1.995823] DCDC1: at 1500 mV [ 2.003003] vdd_mpu: 925 <--> 1325 mV at 1100 mV [ 2.011225] vdd_core: 925 <--> 1150 mV at 1100 mV [ 2.019078] LDO1: at 1800 mV [ 2.025369] LDO2: at 3300 mV [ 2.032630] LDO3: 1800 mV [ 2.038359] LDO4: at 3300 mV [ 2.046125] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.052110] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.120947] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 2.127392] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 2.137516] libphy: 4a101000.mdio: probed [ 2.141919] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 [ 2.152138] Random MACID = de:d9:5c:61:ce:a9 [ 2.163157] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.177281] Waiting for root device /dev/mmcblk0p2... [PYBOOT] [bbb 01:56]: Timed out waiting for "<type 'str'>": [PYBOOT] [bbb 01:57]: got exception: timeout ~$off [PYBOOT] [bbb 01:58]: Done. ======================================================================== Board colombus-arm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 0.098332] Key type id_legacy registered [ 0.098570] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.098582] io scheduler noop registered [ 0.098589] io scheduler deadline registered [ 0.098715] io scheduler cfq registered (default) [ 0.100311] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.143791] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.165656] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 32, base_baud = 1500000) is a U6_16550A [ 0.708014] console [ttyS0] enabled [ 0.711770] Serial: IMX driver [ 0.715218] serial: Freescale lpuart driver [ 0.719646] [drm] Initialized drm 1.1.0 20060810 [ 0.725177] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.731721] ehci-platform: EHCI generic platform driver [ 0.736985] ehci-omap: OMAP-EHCI Host Controller driver [ 0.742254] ehci-orion: EHCI orion driver [ 0.746294] SPEAr-ehci: EHCI SPEAr driver [ 0.750350] tegra-ehci: Tegra EHCI driver [ 0.754538] usbcore: registered new interface driver usb-storage [ 0.761253] mousedev: PS/2 mouse device common for all mice [ 0.767468] sdhci: Secure Digital Host Controller Interface driver [ 0.773665] sdhci: Copyright(c) Pierre Ossman [ 0.778160] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.784316] usbcore: registered new interface driver usbhid [ 0.789897] usbhid: USB HID core driver [ 0.794001] TCP: cubic registered [ 0.797820] NET: Registered protocol family 10 [ 0.802992] sit: IPv6 over IPv4 tunneling driver [ 0.808268] Key type dns_resolver registered [ 0.812693] Registering SWP/SWPB emulation handler [ 0.817920] regulator-dummy: disabling [ 0.821870] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.830920] Waiting for root device /dev/mmcblk0p1... [PYBOOT] [colombus 01:48]: Timed out waiting for "<type 'str'>": [PYBOOT] [colombus 01:49]: got exception: timeout ~$off [PYBOOT] [colombus 01:50]: Done. ======================================================================== Board colombus-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.098216] Key type id_legacy registered [ 0.098456] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.098470] io scheduler noop registered [ 0.098476] io scheduler deadline registered [ 0.098601] io scheduler cfq registered (default) [ 0.100191] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.143776] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.165641] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 32, base_baud = 1500000) is a U6_16550A [ 0.707994] console [ttyS0] enabled [ 0.711751] Serial: IMX driver [ 0.715206] serial: Freescale lpuart driver [ 0.719637] [drm] Initialized drm 1.1.0 20060810 [ 0.725162] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.731702] ehci-platform: EHCI generic platform driver [ 0.736965] ehci-omap: OMAP-EHCI Host Controller driver [ 0.742233] ehci-orion: EHCI orion driver [ 0.746274] SPEAr-ehci: EHCI SPEAr driver [ 0.750330] tegra-ehci: Tegra EHCI driver [ 0.754517] usbcore: registered new interface driver usb-storage [ 0.761236] mousedev: PS/2 mouse device common for all mice [ 0.767443] sdhci: Secure Digital Host Controller Interface driver [ 0.773641] sdhci: Copyright(c) Pierre Ossman [ 0.778140] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.784294] usbcore: registered new interface driver usbhid [ 0.789874] usbhid: USB HID core driver [ 0.793978] TCP: cubic registered [ 0.797793] NET: Registered protocol family 10 [ 0.802967] sit: IPv6 over IPv4 tunneling driver [ 0.808251] Key type dns_resolver registered [ 0.812679] Registering SWP/SWPB emulation handler [ 0.817894] regulator-dummy: disabling [ 0.821846] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.830896] Waiting for root device /dev/mmcblk0p1... [PYBOOT] [colombus 01:49]: Timed out waiting for "<type 'str'>": [PYBOOT] [colombus 01:50]: got exception: timeout ~$off [PYBOOT] [colombus 01:52]: Done. ======================================================================== Board omap5uevm-arm-multi_lpae_defconfig failure log: ------------------------------------------------- ################################################################# ################################################################# ################################################# 543.9 KiB/s done Bytes transferred = 3572272 (368230 hex) U-Boot#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x82000000 queue/v3.12.29/arm-multi_lpae_defconfig/dtbs/omap5-uevm.dtb tftp 0x82000000 queue/v3.12.29/arm-multi_lpae_defconfig/dtbs/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.172 Filename 'queue/v3.12.29/arm-multi_lpae_defconfig/dtbs/omap5-uevm.dtb'. Load address: 0x82000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ## 2.9 KiB/s done Bytes transferred = 17789 (457d hex) U-Boot# bootz 0x81000000 - 0x82000000 ; bootm 0x81000000 - 0x82000000 [PYBOOT] [omap5uevm 00:34]: u-boot: jumping to kernel image bootz 0x81000000 - 0x82000000 ; bootm 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x368230 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Using Device Tree in place at 82000000, end 8200757c Starting kernel ... [PYBOOT] [omap5uevm 00:34]: u-boot: started kernel. [PYBOOT] [omap5uevm 01:09]: Timed out waiting for "<type 'str'>": [PYBOOT] [omap5uevm 01:10]: got exception: timeout ~$off [PYBOOT] [omap5uevm 01:11]: Done. ======================================================================== Board omap5uevm-arm-multi_v7_defconfig failure log: ------------------------------------------------- ################################################################# ################################################################# ################################################# 555.7 KiB/s done Bytes transferred = 3572272 (368230 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x82000000 queue/v3.12.29/arm-multi_v7_defconfig/dtbs/omap5-uevm.dtb tftp 0x82000000 queue/v3.12.29/arm-multi_v7_defconfig/dtbs/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.172 Filename 'queue/v3.12.29/arm-multi_v7_defconfig/dtbs/omap5-uevm.dtb'. Load address: 0x82000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ## 2.9 KiB/s done Bytes transferred = 17789 (457d hex) U-Boot# bootz 0x81000000 - 0x82000000 ; bootm 0x81000000 - 0x82000000 [PYBOOT] [omap5uevm 00:34]: u-boot: jumping to kernel image bootz 0x81000000 - 0x82000000 ; bootm 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x368230 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Using Device Tree in place at 82000000, end 8200757c Starting kernel ... [PYBOOT] [omap5uevm 00:34]: u-boot: started kernel. [PYBOOT] [omap5uevm 01:09]: Timed out waiting for "<type 'str'>": [PYBOOT] [omap5uevm 01:10]: got exception: timeout ~$off [PYBOOT] [omap5uevm 01:11]: Done. ======================================================================== Board omap5uevm-arm-omap2plus_defconfig failure log: ------------------------------------------------- ################################################################# ################################################################# ######################### 547.9 KiB/s done Bytes transferred = 4177424 (3fbe10 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x82000000 queue/v3.12.29/arm-omap2plus_defconfig/dtbs/omap5-uevm.dtb tftp 0x82000000 queue/v3.12.29/arm-omap2plus_defconfig/dtbs/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.172 Filename 'queue/v3.12.29/arm-omap2plus_defconfig/dtbs/omap5-uevm.dtb'. Load address: 0x82000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ## 2.9 KiB/s done Bytes transferred = 17789 (457d hex) U-Boot# bootz 0x81000000 - 0x82000000 ; bootm 0x81000000 - 0x82000000 [PYBOOT] [omap5uevm 00:38]: u-boot: jumping to kernel image bootz 0x81000000 - 0x82000000 ; bootm 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x3fbe10 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Using Device Tree in place at 82000000, end 8200757c Starting kernel ... [PYBOOT] [omap5uevm 00:38]: u-boot: started kernel. [PYBOOT] [omap5uevm 01:13]: Timed out waiting for "<type 'str'>": [PYBOOT] [omap5uevm 01:14]: got exception: timeout ~$off [PYBOOT] [omap5uevm 01:15]: Done.

10 years, 2 months

queue build: 83 warnings 1 failures (queue/v3.12.29)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was queue, found at: Local queue of patches applied from http://git.kernel.org/cgit/linux/kernel/git/stable/stable-queue.git Topmost commit: b45ddfa Linux 3.12.29 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/queue/v3.12.29/ Runtime: 42m 25s Passed: 121 Failed: 1 Warnings: 83 Section mismatches: 3 ------------------------------------------------------------------------------- Failed defconfigs: arm64.allmodconfig ------------------------------------------------------------------------------- Errors: arm64.allmodconfig: drivers/parport/parport_pc.c:67:25: fatal error: asm/parport.h: No such file or directory drivers/media/usb/b2c2/flexcop-usb.c:393:3: error: implicit declaration of function 'pci_free_consistent' [-Werror=implicit-function-declaration] drivers/media/usb/b2c2/flexcop-usb.c:410:2: error: implicit declaration of function 'pci_alloc_consistent' [-Werror=implicit-function-declaration] drivers/staging/lustre/include/linux/libcfs/libcfs_private.h:418:53: error: duplicate case value drivers/staging/lustre/include/linux/libcfs/libcfs_private.h:418:40: error: previously used here Warnings: 1 arch/arm/mach-cns3xxx/pcie.c:350:1: warning: the frame size of 1072 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 drivers/block/mtip32xx/mtip32xx.c:2827:1: warning: the frame size of 1080 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 drivers/block/mtip32xx/mtip32xx.c:2898:1: warning: the frame size of 1040 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 drivers/block/mtip32xx/mtip32xx.c:2921:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 drivers/dma/pl330.c:2317:21: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/gpio/gpio-mcp23s08.c:643:10: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/gpu/drm/radeon/cypress_dpm.c:302:31: warning: unused variable 'eg_pi' [-Wunused-variable] 1 drivers/gpu/drm/radeon/ni_dpm.c:3448:31: warning: unused variable 'eg_pi' [-Wunused-variable] 1 drivers/iio/adc/exynos_adc.c:112:9: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/infiniband/hw/cxgb4/mem.c:79:25: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/input/joystick/analog.c:171:2: warning: #warning Precise timer not defined for this architecture. [-Wcpp] 1 drivers/input/misc/xen-kbdfront.c:258:8: warning: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'long long unsigned int' [-Wformat=] 1 drivers/media/radio/radio-shark2.c:240:13: warning: 'shark_resume_leds' defined but not used [-Wunused-function] 1 drivers/media/radio/radio-shark.c:274:13: warning: 'shark_resume_leds' defined but not used [-Wunused-function] 1 drivers/media/usb/b2c2/flexcop-usb.c:410:21: warning: assignment makes pointer from integer without a cast 1 drivers/mfd/arizona-core.c:509:10: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/mfd/tps65217.c:173:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/misc/lkdtm.c:293:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 drivers/mtd/chips/cfi_cmdset_0020.c:654:1: warning: the frame size of 1200 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 drivers/net/ethernet/dec/tulip/winbond-840.c:911:2: warning: #warning Processor architecture undefined [-Wcpp] 1 drivers/net/wireless/ti/wlcore/spi.c:317:1: warning: the frame size of 9728 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 drivers/net/xen-netback/interface.c:241:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] 1 drivers/net/xen-netfront.c:1858:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] 1 drivers/pinctrl/pinctrl-bcm2835.c:1043:18: warning: ignoring return value of 'gpiochip_remove', declared with attribute warn_unused_result [-Wunused-result] 1 drivers/pinctrl/pinctrl-bcm2835.c:1060:17: warning: ignoring return value of 'gpiochip_remove', declared with attribute warn_unused_result [-Wunused-result] 1 drivers/power/ab8500_charger.c:1390:20: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 drivers/power/ab8500_charger.c:1559:20: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 drivers/power/pm2301_charger.c:725:20: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 drivers/power/reset/xgene-reboot.c:80:17: warning: assignment from incompatible pointer type 1 drivers/regulator/tps62360-regulator.c:363:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/scsi/3w-xxxx.c:1004:14: warning: mis-aligned access used for structure member [-fstrict-volatile-bitfields] 1 drivers/scsi/3w-xxxx.c:2145:29: warning: mis-aligned access used for structure member [-fstrict-volatile-bitfields] 1 drivers/scsi/aic7xxx_old.c:7898:5: warning: case value '513' not in enumerated type 'ahc_chip' [-Wswitch] 1 drivers/scsi/aic7xxx_old.c:7901:5: warning: case value '257' not in enumerated type 'ahc_chip' [-Wswitch] 1 drivers/scsi/aic7xxx_old.c:8510:5: warning: case value '513' not in enumerated type 'ahc_chip' [-Wswitch] 1 drivers/scsi/aic7xxx_old.c:8517:5: warning: case value '257' not in enumerated type 'ahc_chip' [-Wswitch] 1 drivers/scsi/ips.c:210:2: warning: #warning "This driver has only been tested on the x86/ia64/x86_64 platforms" [-Wcpp] 1 drivers/spi/spi-atmel.c:1335:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/spi/spi-atmel.c:1460:19: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/spi/spi-gpio.c:252:8: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/spi/spi-pl022.c:281:31: warning: large integer implicitly truncated to unsigned type [-Woverflow] 1 drivers/staging/bcm/CmHost.c:1387:39: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/staging/bcm/CmHost.c:1426:37: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/staging/bcm/CmHost.c:1440:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/staging/dgap/dgap_driver.c:982:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 drivers/staging/dgap/dgap_fep5.c:112:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 drivers/staging/dgap/dgap_fep5.c:173:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 drivers/staging/dgap/dgap_tty.c:664:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 drivers/staging/dgnc/dgnc_tty.c:613:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 drivers/staging/rts5139/rts51x.c:204:13: warning: 'rts51x_try_to_enter_ss' defined but not used [-Wunused-function] 1 drivers/staging/sm7xxfb/sm7xxfb.c:117:19: warning: 'sm7xx_vga_setup' defined but not used [-Wunused-function] 1 drivers/staging/vt6655/device_main.c:3257:1: warning: the frame size of 1864 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 drivers/staging/vt6655/iwctl.c:758:1: warning: the frame size of 1280 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 drivers/staging/wlan-ng/prism2fw.c:795:1: warning: the frame size of 1072 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 drivers/tty/serial/efm32-uart.c:834:20: warning: 'efm32_uart_exit' defined but not used [-Wunused-function] 1 drivers/usb/storage/realtek_cr.c:629:12: warning: 'config_autodelink_before_power_down' defined but not used [-Wunused-function] 1 drivers/usb/storage/realtek_cr.c:699:13: warning: 'fw5895_init' defined but not used [-Wunused-function] 1 drivers/video/aty/radeon_pm.c:1718:13: warning: 'radeon_reinitialize_M10' defined but not used [-Wunused-function] 1 drivers/video/omap2/displays-new/panel-sony-acx565akm.c:608:25: warning: unused variable 'ddata' [-Wunused-variable] 1 drivers/video/xen-fbfront.c:589:8: warning: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'long long unsigned int' [-Wformat=] 1 include/linux/dynamic_debug.h:64:16: warning: format '%d' expects argument of type 'int', but argument 5 has type 'size_t' [-Wformat=] 1 include/linux/dynamic_debug.h:64:16: warning: format '%d' expects argument of type 'int', but argument 6 has type 'size_t' [-Wformat=] 1 include/linux/dynamic_debug.h:64:16: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'size_t' [-Wformat=] 1 include/pcmcia/ds.h:213) [-Wdeprecated-declarations] 1 net/sunrpc/xprtrdma/verbs.c:1774:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 sound/soc/fsl/imx-audmux.c:161:7: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 sound/soc/fsl/imx-audmux.c:70:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 2 arch/arm64/include/asm/cmpxchg.h:74:3: warning: value computed is not used [-Wunused-value] 2 drivers/net/ethernet/smsc/smc91x.c:1899:7: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 2 include/linux/dynamic_debug.h:78:21: warning: unsupported argument to '__builtin_return_address' [enabled by default] 3 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:120:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] 3 drivers/scsi/3w-xxxx.c:1001:61: warning: mis-aligned access used for structure member [-fstrict-volatile-bitfields] 4 arch/arm64/include/asm/cmpxchg.h:162:3: warning: value computed is not used [-Wunused-value] Section mismatches: 1 allmodconfig WARNING: drivers/built-in.o(.data+0x34120): Section mismatch in reference from the variable dbx500_cpuidle_plat_driver to the function .init.text:dbx500_cpuidle_probe() 1 allmodconfig WARNING: drivers/cpuidle/built-in.o(.data+0x938): Section mismatch in reference from the variable dbx500_cpuidle_plat_driver to the function .init.text:dbx500_cpuidle_probe() 1 allmodconfig WARNING: vmlinux.o(.data+0xdc9a0): Section mismatch in reference from the variable dbx500_cpuidle_plat_driver to the function .init.text:dbx500_cpuidle_probe()

10 years, 2 months

v3.12.29 build: 8 failures 129 warnings (v3.12.29)

by Build bot for Mark Brown

Tree/Branch: v3.12.29 Git describe: v3.12.29 Commit: b45ddfa256 Linux 3.12.29 Build Time: 44 min 16 sec Passed: 0 / 8 ( 0.00 %) Failed: 8 / 8 (100.00 %) Errors: 34 Warnings: 129 Section Mismatches: 1 Failed defconfigs: arm64-allnoconfig arm64-allmodconfig arm-multi_v7_defconfig x86_64-defconfig arm-allmodconfig arm-allnoconfig x86_64-allnoconfig arm64-defconfig Errors: arm64-allnoconfig /home/broonie/build/linux-stable/drivers/input/input-mt.c:303:1: error: expected identifier or '(' at end of input arm64-allmodconfig /home/broonie/build/linux-stable/drivers/hwmon/sht21.c:132:1: error: expected '=', ',', ';', 'asm' or '__attribute__' at end of input /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:8: error: 'struct smsc47m192_data' has no member named 'temp_' /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:4: error: expected ';' at end of input /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:4: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:4: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:4: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/hwmon/thmc50.c:416:39: error: expected '{' at end of input /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:137:28: error: 'struct sensor_device_attribute' has no member named 'dev_a' /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:137:2: error: expected '}' at end of input /home/broonie/build/linux-stable/drivers/hwmon/pmbus/pmbus.c:115:4: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/hwmon/pmbus/pmbus.c:115:4: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/hwmon/pmbus/pmbus.c:115:4: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/input/input-mt.c:303:1: error: expected identifier or '(' at end of input /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:597:17: error: 'p' undeclared (first use in this function) /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:597:3: error: expected ')' at end of input /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:597:3: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:597:3: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/media/usb/b2c2/flexcop-usb.c:393:3: error: implicit declaration of function 'pci_free_consistent' [-Werror=implicit-function-declaration] /home/broonie/build/linux-stable/drivers/media/usb/b2c2/flexcop-usb.c:410:2: error: implicit declaration of function 'pci_alloc_consistent' [-Werror=implicit-function-declaration] /home/broonie/build/linux-stable/drivers/parport/parport_pc.c:67:25: fatal error: asm/parport.h: No such file or directory /home/broonie/build/linux-stable/drivers/staging/lustre/lustre/llite/lloop.c:527:78: error: duplicate case value /home/broonie/build/linux-stable/drivers/staging/lustre/lustre/llite/lloop.c:527:18: error: previously used here arm-multi_v7_defconfig /home/broonie/build/linux-stable/drivers/input/input-mt.c:303:1: error: expected identifier or '(' at end of input x86_64-defconfig /home/broonie/build/linux-stable/drivers/input/input-mt.c:303:1: error: expected identifier or '(' at end of input arm-allmodconfig /home/broonie/build/linux-stable/drivers/hwspinlock/omap_hwspinlock.c:158:2: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/hwmon/sht21.c:132:1: error: expected '=', ',', ';', 'asm' or '__attribute__' at end of input /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:8: error: 'struct smsc47m192_data' has no member named 'temp_' /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:4: error: expected ';' at end of input /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:4: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:4: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:4: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/hwmon/thmc50.c:416:39: error: expected '{' at end of input /home/broonie/build/linux-stable/drivers/hwmon/twl4030-madc-hwmon.c:123:1: error: expected identifier or '(' at end of input /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:137:28: error: 'struct sensor_device_attribute' has no member named 'dev_a' /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:137:2: error: expected '}' at end of input /home/broonie/build/linux-stable/drivers/hwmon/pmbus/pmbus.c:115:4: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/hwmon/pmbus/pmbus.c:115:4: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/hwmon/pmbus/pmbus.c:115:4: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/input/input-mt.c:303:1: error: expected identifier or '(' at end of input /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:597:17: error: 'p' undeclared (first use in this function) /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:597:3: error: expected ')' at end of input /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:597:3: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:597:3: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/infiniband/core/mad_priv.h:36:0: error: unterminated #ifndef /home/broonie/build/linux-stable/drivers/infiniband/core/mad_rmpp.h:36:1: error: expected ':', ',', ';', '}' or '__attribute__' before 'enum' /home/broonie/build/linux-stable/drivers/infiniband/core/mad_priv.h:36:0: error: unterminated #ifndef /home/broonie/build/linux-stable/drivers/infiniband/core/agent.c:48:1: error: expected ':', ',', ';', '}' or '__attribute__' before 'struct' /home/broonie/build/linux-stable/drivers/infiniband/core/agent.c:128:3: error: missing terminating " character /home/broonie/build/linux-stable/drivers/infiniband/core/mad_priv.h:36:0: error: unterminated #ifndef /home/broonie/build/linux-stable/drivers/infiniband/core/mad_rmpp.h:36:1: error: expected ':', ',', ';', '}' or '__attribute__' before 'enum' /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:1148:29: error: 'stru' undeclared (first use in this function) /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:1148:7: error: expected ')' at end of input /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:1147:13: error: too few arguments to function 'kzalloc' /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:1148:7: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/infiniband/hw/amso1100/c2_cq.c:323:17: error: 'cpu_to_be6' undeclared (first use in this function) /home/broonie/build/linux-stable/drivers/infiniband/hw/amso1100/c2_cq.c:323:2: error: expected ';' at end of input /home/broonie/build/linux-stable/drivers/infiniband/hw/amso1100/c2_cq.c:323:2: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/infiniband/hw/amso1100/c2_cq.c:314:3: error: label 'bail1' used but not defined /home/broonie/build/linux-stable/drivers/infiniband/hw/amso1100/c2_cq.c:309:3: error: label 'bail0' used but not defined /home/broonie/build/linux-stable/drivers/infiniband/hw/mthca/mthca_mad.c:259:3: error: expected ';' at end of input /home/broonie/build/linux-stable/drivers/infiniband/hw/mthca/mthca_mad.c:259:3: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/infiniband/hw/mthca/mthca_mad.c:259:3: error: expected declaration or statement at end of input arm-allnoconfig /home/broonie/build/linux-stable/drivers/input/input-mt.c:303:1: error: expected identifier or '(' at end of input x86_64-allnoconfig /home/broonie/build/linux-stable/drivers/input/input-mt.c:303:1: error: expected identifier or '(' at end of input arm64-defconfig /home/broonie/build/linux-stable/drivers/input/input-mt.c:303:1: error: expected identifier or '(' at end of input ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): 1 warnings 0 mismatches : arm64-allnoconfig 70 warnings 0 mismatches : arm64-allmodconfig 1 warnings 0 mismatches : arm-multi_v7_defconfig 2 warnings 0 mismatches : x86_64-defconfig 88 warnings 1 mismatches : arm-allmodconfig 1 warnings 0 mismatches : arm-allnoconfig 3 warnings 0 mismatches : x86_64-allnoconfig 3 warnings 0 mismatches : arm64-defconfig ------------------------------------------------------------------------------- Errors summary: 34 8 /home/broonie/build/linux-stable/drivers/input/input-mt.c:303:1: error: expected identifier or '(' at end of input 6 /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:4: error: expected declaration or statement at end of input 6 /home/broonie/build/linux-stable/drivers/hwmon/pmbus/pmbus.c:115:4: error: expected declaration or statement at end of input 4 /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:597:3: error: expected declaration or statement at end of input 3 /home/broonie/build/linux-stable/drivers/infiniband/core/mad_priv.h:36:0: error: unterminated #ifndef 2 /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:597:3: error: expected ')' at end of input 2 /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:597:17: error: 'p' undeclared (first use in this function) 2 /home/broonie/build/linux-stable/drivers/infiniband/hw/mthca/mthca_mad.c:259:3: error: expected declaration or statement at end of input 2 /home/broonie/build/linux-stable/drivers/infiniband/core/mad_rmpp.h:36:1: error: expected ':', ',', ';', '}' or '__attribute__' before 'enum' 2 /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:137:2: error: expected '}' at end of input 2 /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:137:28: error: 'struct sensor_device_attribute' has no member named 'dev_a' 2 /home/broonie/build/linux-stable/drivers/hwmon/thmc50.c:416:39: error: expected '{' at end of input 2 /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:8: error: 'struct smsc47m192_data' has no member named 'temp_' 2 /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:4: error: expected ';' at end of input 2 /home/broonie/build/linux-stable/drivers/hwmon/sht21.c:132:1: error: expected '=', ',', ';', 'asm' or '__attribute__' at end of input 1 /home/broonie/build/linux-stable/drivers/staging/lustre/lustre/llite/lloop.c:527:78: error: duplicate case value 1 /home/broonie/build/linux-stable/drivers/staging/lustre/lustre/llite/lloop.c:527:18: error: previously used here 1 /home/broonie/build/linux-stable/drivers/parport/parport_pc.c:67:25: fatal error: asm/parport.h: No such file or directory 1 /home/broonie/build/linux-stable/drivers/media/usb/b2c2/flexcop-usb.c:410:2: error: implicit declaration of function 'pci_alloc_consistent' [-Werror=implicit-function-declaration] 1 /home/broonie/build/linux-stable/drivers/media/usb/b2c2/flexcop-usb.c:393:3: error: implicit declaration of function 'pci_free_consistent' [-Werror=implicit-function-declaration] 1 /home/broonie/build/linux-stable/drivers/infiniband/hw/mthca/mthca_mad.c:259:3: error: expected ';' at end of input 1 /home/broonie/build/linux-stable/drivers/infiniband/hw/amso1100/c2_cq.c:323:2: error: expected declaration or statement at end of input 1 /home/broonie/build/linux-stable/drivers/infiniband/hw/amso1100/c2_cq.c:323:2: error: expected ';' at end of input 1 /home/broonie/build/linux-stable/drivers/infiniband/hw/amso1100/c2_cq.c:323:17: error: 'cpu_to_be6' undeclared (first use in this function) 1 /home/broonie/build/linux-stable/drivers/infiniband/hw/amso1100/c2_cq.c:314:3: error: label 'bail1' used but not defined 1 /home/broonie/build/linux-stable/drivers/infiniband/hw/amso1100/c2_cq.c:309:3: error: label 'bail0' used but not defined 1 /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:1148:7: error: expected declaration or statement at end of input 1 /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:1148:7: error: expected ')' at end of input 1 /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:1148:29: error: 'stru' undeclared (first use in this function) 1 /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:1147:13: error: too few arguments to function 'kzalloc' 1 /home/broonie/build/linux-stable/drivers/infiniband/core/agent.c:48:1: error: expected ':', ',', ';', '}' or '__attribute__' before 'struct' 1 /home/broonie/build/linux-stable/drivers/infiniband/core/agent.c:128:3: error: missing terminating " character 1 /home/broonie/build/linux-stable/drivers/hwspinlock/omap_hwspinlock.c:158:2: error: expected declaration or statement at end of input 1 /home/broonie/build/linux-stable/drivers/hwmon/twl4030-madc-hwmon.c:123:1: error: expected identifier or '(' at end of input Warnings Summary: 129 8 /home/broonie/build/linux-stable/drivers/input/input-mt.c:274:12: warning: 'adjust_dual' defined but not used [-Wunused-function] 2 /home/broonie/build/linux-stable/net/core/secure_seq.c:30:4: warning: value computed is not used [-Wunused-value] 2 /home/broonie/build/linux-stable/drivers/net/ethernet/smsc/smc91x.c:1899:7: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 2 /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:597:3: warning: no return statement in function returning non-void [-Wreturn-type] 2 /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:583:6: warning: unused variable 'i' [-Wunused-variable] 2 /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:583:15: warning: unused variable 'v' [-Wunused-variable] 2 /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:583:12: warning: unused variable 'u' [-Wunused-variable] 2 /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:581:12: warning: 'analog_init_port' defined but not used [-Wunused-function] 2 /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:520:12: warning: 'analog_init_masks' defined but not used [-Wunused-function] 2 /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:428:12: warning: 'analog_init_device' defined but not used [-Wunused-function] 2 /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:307:13: warning: 'analog_poll' defined but not used [-Wunused-function] 2 /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:129:26: warning: 'wm831x_attributes' defined but not used [-Wunused-variable] 2 /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:126:39: warning: 'sensor_dev_attr_temp2_label' defined but not used [-Wunused-variable] 2 /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:124:39: warning: 'sensor_dev_attr_temp2_input' defined but not used [-Wunused-variable] 2 /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:118:39: warning: 'sensor_dev_attr_temp1_label' defined but not used [-Wunused-variable] 2 /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:116:39: warning: 'sensor_dev_attr_temp1_input' defined but not used [-Wunused-variable] 2 /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:114:39: warning: 'sensor_dev_attr_in8_input' defined but not used [-Wunused-variable] 2 /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:114:262: warning: 'sensor_dev_attr_in8_label' defined but not used [-Wunused-variable] 2 /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:113:39: warning: 'sensor_dev_attr_in7_input' defined but not used [-Wunused-variable] 2 /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:113:257: warning: 'sensor_dev_attr_in7_label' defined but not used [-Wunused-variable] 2 /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:112:39: warning: 'sensor_dev_attr_in6_input' defined but not used [-Wunused-variable] 2 /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:112:257: warning: 'sensor_dev_attr_in6_label' defined but not used [-Wunused-variable] 2 /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:111:39: warning: 'sensor_dev_attr_in5_input' defined but not used [-Wunused-variable] 2 /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:111:256: warning: 'sensor_dev_attr_in5_label' defined but not used [-Wunused-variable] 2 /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:110:259: warning: 'sensor_dev_attr_in4_label' defined but not used [-Wunused-variable] 2 /home/broonie/build/linux-stable/drivers/hwmon/thmc50.c:103:26: warning: 'thmc50_driver' defined but not used [-Wunused-variable] 2 /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:4: warning: no return statement in function returning non-void [-Wreturn-type] 2 /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:614:9: warning: unused variable 'config' [-Wunused-variable] 2 /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:128:26: warning: 'smsc47m192_driver' defined but not used [-Wunused-variable] 2 /home/broonie/build/linux-stable/drivers/hwmon/sht21.c:92:12: warning: 'sht21_update_measurements' defined but not used [-Wunused-function] 2 /home/broonie/build/linux-stable/drivers/hwmon/pmbus/pmbus.c:99:6: warning: unused variable 'ret' [-Wunused-variable] 2 /home/broonie/build/linux-stable/drivers/hwmon/pmbus/pmbus.c:96:12: warning: 'pmbus_identify' defined but not used [-Wunused-function] 2 /home/broonie/build/linux-stable/drivers/hwmon/pmbus/pmbus.c:33:13: warning: 'pmbus_find_sensor_groups' defined but not used [-Wunused-function] 2 /home/broonie/build/linux-stable/drivers/hwmon/pmbus/pmbus.c:115:4: warning: no return statement in function returning non-void [-Wreturn-type] 1 /home/broonie/build/linux-stable/sound/soc/fsl/imx-audmux.c:70:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable/sound/soc/fsl/imx-audmux.c:161:7: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 /home/broonie/build/linux-stable/net/sunrpc/xprtrdma/verbs.c:1774:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/net/netfilter/xt_connlimit.c:234:4: warning: value computed is not used [-Wunused-value] 1 /home/broonie/build/linux-stable/net/netfilter/nf_conntrack_core.c:674:3: warning: value computed is not used [-Wunused-value] 1 /home/broonie/build/linux-stable/drivers/video/xen-fbfront.c:589:8: warning: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'long long unsigned int' [-Wformat=] 1 /home/broonie/build/linux-stable/drivers/video/omap2/displays-new/panel-sony-acx565akm.c:608:25: warning: unused variable 'ddata' [-Wunused-variable] 1 /home/broonie/build/linux-stable/drivers/video/aty/radeon_pm.c:1718:13: warning: 'radeon_reinitialize_M10' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/usb/storage/realtek_cr.c:699:13: warning: 'fw5895_init' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/usb/storage/realtek_cr.c:629:12: warning: 'config_autodelink_before_power_down' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/tty/serial/efm32-uart.c:834:123: warning: 'efm32_uart_exit' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/staging/wlan-ng/prism2fw.c:795:1: warning: the frame size of 1072 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/drivers/staging/vt6655/iwctl.c:758:1: warning: the frame size of 1280 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/drivers/staging/vt6655/device_main.c:3257:1: warning: the frame size of 1864 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/drivers/staging/sm7xxfb/sm7xxfb.c:117:122: warning: 'sm7xx_vga_setup' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/staging/rts5139/rts51x.c:204:13: warning: 'rts51x_try_to_enter_ss' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/staging/dgnc/dgnc_tty.c:613:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/drivers/staging/dgap/dgap_tty.c:664:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/drivers/staging/dgap/dgap_fep5.c:173:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/drivers/staging/dgap/dgap_fep5.c:112:1: warning: the frame size of 1040 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/drivers/staging/dgap/dgap_driver.c:982:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/drivers/staging/bcm/CmHost.c:1440:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 /home/broonie/build/linux-stable/drivers/staging/bcm/CmHost.c:1426:37: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 /home/broonie/build/linux-stable/drivers/staging/bcm/CmHost.c:1387:39: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 /home/broonie/build/linux-stable/drivers/spi/spi-pl022.c:1423:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] 1 /home/broonie/build/linux-stable/drivers/spi/spi-gpio.c:252:8: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable/drivers/spi/spi-atmel.c:1460:18: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable/drivers/spi/spi-atmel.c:1335:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable/drivers/scsi/ips.c:210:2: warning: #warning "This driver has only been tested on the x86/ia64/x86_64 platforms" [-Wcpp] 1 /home/broonie/build/linux-stable/drivers/scsi/aic7xxx_old.c:8517:5: warning: case value '257' not in enumerated type 'ahc_chip' [-Wswitch] 1 /home/broonie/build/linux-stable/drivers/scsi/aic7xxx_old.c:8510:5: warning: case value '513' not in enumerated type 'ahc_chip' [-Wswitch] 1 /home/broonie/build/linux-stable/drivers/scsi/aic7xxx_old.c:7901:5: warning: case value '257' not in enumerated type 'ahc_chip' [-Wswitch] 1 /home/broonie/build/linux-stable/drivers/scsi/aic7xxx_old.c:7898:5: warning: case value '513' not in enumerated type 'ahc_chip' [-Wswitch] 1 /home/broonie/build/linux-stable/drivers/regulator/tps62360-regulator.c:363:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable/drivers/power/reset/xgene-reboot.c:80:17: warning: assignment from incompatible pointer type [enabled by default] 1 /home/broonie/build/linux-stable/drivers/power/pm2301_charger.c:725:4: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 /home/broonie/build/linux-stable/drivers/power/ab8500_charger.c:1559:4: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 /home/broonie/build/linux-stable/drivers/power/ab8500_charger.c:1390:4: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 /home/broonie/build/linux-stable/drivers/pinctrl/pinctrl-bcm2835.c:1060:2: warning: ignoring return value of 'gpiochip_remove', declared with attribute warn_unused_result [-Wunused-result] 1 /home/broonie/build/linux-stable/drivers/pinctrl/pinctrl-bcm2835.c:1043:3: warning: ignoring return value of 'gpiochip_remove', declared with attribute warn_unused_result [-Wunused-result] 1 /home/broonie/build/linux-stable/drivers/net/xen-netfront.c:1858:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] 1 /home/broonie/build/linux-stable/drivers/net/xen-netback/interface.c:241:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] 1 /home/broonie/build/linux-stable/drivers/net/wireless/ti/wlcore/spi.c:317:1: warning: the frame size of 9728 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/drivers/net/wireless/cw1200/sta.c:142:4: warning: value computed is not used [-Wunused-value] 1 /home/broonie/build/linux-stable/drivers/net/wireless/cw1200/scan.c:330:4: warning: value computed is not used [-Wunused-value] 1 /home/broonie/build/linux-stable/drivers/net/ethernet/dec/tulip/winbond-840.c:911:2: warning: #warning Processor architecture undefined [-Wcpp] 1 /home/broonie/build/linux-stable/drivers/net/ethernet/amd/nmclan_cs.c:625:3: warning: 'pcmcia_request_exclusive_irq' is deprecated (declared at /home/broonie/build/linux-stable/include/pcmcia/ds.h:213) [-Wdeprecated-declarations] 1 /home/broonie/build/linux-stable/drivers/mtd/nand/gpmi-nand/gpmi-nand.c:120:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/mtd/chips/cfi_cmdset_0020.c:654:1: warning: the frame size of 1192 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/drivers/misc/lkdtm.c:293:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/drivers/mfd/tps65217.c:173:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable/drivers/mfd/arizona-core.c:509:10: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable/drivers/media/usb/b2c2/flexcop-usb.c:410:21: warning: assignment makes pointer from integer without a cast [enabled by default] 1 /home/broonie/build/linux-stable/drivers/media/radio/radio-shark2.c:240:13: warning: 'shark_resume_leds' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/media/radio/radio-shark.c:274:13: warning: 'shark_resume_leds' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/isdn/hardware/mISDN/w6692.c:1181:75: warning: unsupported argument to '__builtin_return_address' 1 /home/broonie/build/linux-stable/drivers/isdn/hardware/mISDN/mISDNipac.c:759:75: warning: unsupported argument to '__builtin_return_address' 1 /home/broonie/build/linux-stable/drivers/input/misc/xen-kbdfront.c:258:8: warning: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'long long unsigned int' [-Wformat=] 1 /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:171:2: warning: #warning Precise timer not defined for this architecture. [-Wcpp] 1 /home/broonie/build/linux-stable/drivers/infiniband/hw/mthca/mthca_mad.c:259:3: warning: control reaches end of non-void function [-Wreturn-type] 1 /home/broonie/build/linux-stable/drivers/infiniband/hw/mthca/mthca_mad.c:148:13: warning: 'node_desc_override' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/infiniband/hw/mthca/mthca_mad.c:105:13: warning: 'smp_snoop' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/infiniband/hw/cxgb4/mem.c:79:25: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable/drivers/infiniband/hw/amso1100/c2_cq.c:323:2: warning: control reaches end of non-void function [-Wreturn-type] 1 /home/broonie/build/linux-stable/drivers/infiniband/hw/amso1100/c2_cq.c:291:16: warning: unused variable 'peer_pa' [-Wunused-variable] 1 /home/broonie/build/linux-stable/drivers/infiniband/hw/amso1100/c2_cq.c:290:29: warning: unused variable 'reply' [-Wunused-variable] 1 /home/broonie/build/linux-stable/drivers/infiniband/hw/amso1100/c2_cq.c:257:13: warning: 'c2_free_cq_buf' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:981:38: warning: 'class_attr_abi_version' defined but not used [-Wunused-variable] 1 /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:951:25: warning: 'umad_client' defined but not used [-Wunused-variable] 1 /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:145:25: warning: 'ib_umad_dev_ktype' defined but not used [-Wunused-variable] 1 /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:135:13: warning: 'ib_umad_remove_one' used but never defined 1 /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:1135:12: warning: unused variable 'i' [-Wunused-variable] 1 /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:1096:13: warning: 'ib_umad_kill_port' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:1006:12: warning: 'ib_umad_init_port' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/infiniband/core/agent.c:128:24: warning: missing terminating " character 1 /home/broonie/build/linux-stable/drivers/iio/adc/exynos_adc.c:112:9: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable/drivers/hwspinlock/omap_hwspinlock.c:81:12: warning: 'omap_hwspinlock_probe' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/hwspinlock/omap_hwspinlock.c:145:12: warning: 'omap_hwspinlock_remove' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/hwmon/twl4030-madc-hwmon.c:99:12: warning: 'twl4030_madc_hwmon_probe' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/hwmon/thmc50.c:94:28: warning: 'thmc50_update_device' used but never defined [enabled by default] 1 /home/broonie/build/linux-stable/drivers/hwmon/thmc50.c:94:28: warning: 'thmc50_update_device' used but never defined 1 /home/broonie/build/linux-stable/drivers/gpu/drm/radeon/ni_dpm.c:3448:31: warning: unused variable 'eg_pi' [-Wunused-variable] 1 /home/broonie/build/linux-stable/drivers/gpu/drm/radeon/cypress_dpm.c:302:31: warning: unused variable 'eg_pi' [-Wunused-variable] 1 /home/broonie/build/linux-stable/drivers/gpio/gpio-mcp23s08.c:643:10: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable/drivers/dma/pl330.c:2317:21: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable/drivers/dma/amba-pl08x.c:1693:2: warning: format '%d' expects argument of type 'int', but argument 6 has type 'size_t' [-Wformat=] 1 /home/broonie/build/linux-stable/drivers/dma/amba-pl08x.c:1693:2: warning: format '%d' expects argument of type 'int', but argument 5 has type 'size_t' [-Wformat=] 1 /home/broonie/build/linux-stable/drivers/dma/amba-pl08x.c:1041:4: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'size_t' [-Wformat=] 1 /home/broonie/build/linux-stable/drivers/char/hw_random/via-rng.c:224:26: warning: 'via_rng_cpu_id' defined but not used [-Wunused-variable] 1 /home/broonie/build/linux-stable/drivers/block/mtip32xx/mtip32xx.c:2921:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/drivers/block/mtip32xx/mtip32xx.c:2898:1: warning: the frame size of 1040 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/drivers/block/mtip32xx/mtip32xx.c:2827:1: warning: the frame size of 1080 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/drivers/base/topology.c:86:106: warning: unused variable 'cpu' [-Wunused-variable] 1 /home/broonie/build/linux-stable/drivers/base/topology.c:83:118: warning: unused variable 'cpu' [-Wunused-variable] 1 /home/broonie/build/linux-stable/arch/arm/mach-cns3xxx/pcie.c:350:1: warning: the frame size of 1072 bytes is larger than 1024 bytes [-Wframe-larger-than=] Section Mismatch Summary: 1 1 WARNING: drivers/cpuidle/built-in.o(.data+0x938): Section mismatch in reference from the variable dbx500_cpuidle_plat_driver to the function .init.text:dbx500_cpuidle_probe() =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- arm64-allnoconfig : FAIL, 1 errors, 1 warnings, 0 section mismatches Errors: /home/broonie/build/linux-stable/drivers/input/input-mt.c:303:1: error: expected identifier or '(' at end of input Warnings: /home/broonie/build/linux-stable/drivers/input/input-mt.c:274:12: warning: 'adjust_dual' defined but not used [-Wunused-function] ------------------------------------------------------------------------------- arm64-allmodconfig : FAIL, 22 errors, 70 warnings, 0 section mismatches Errors: /home/broonie/build/linux-stable/drivers/hwmon/sht21.c:132:1: error: expected '=', ',', ';', 'asm' or '__attribute__' at end of input /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:8: error: 'struct smsc47m192_data' has no member named 'temp_' /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:4: error: expected ';' at end of input /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:4: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:4: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:4: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/hwmon/thmc50.c:416:39: error: expected '{' at end of input /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:137:28: error: 'struct sensor_device_attribute' has no member named 'dev_a' /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:137:2: error: expected '}' at end of input /home/broonie/build/linux-stable/drivers/hwmon/pmbus/pmbus.c:115:4: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/hwmon/pmbus/pmbus.c:115:4: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/hwmon/pmbus/pmbus.c:115:4: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/input/input-mt.c:303:1: error: expected identifier or '(' at end of input /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:597:17: error: 'p' undeclared (first use in this function) /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:597:3: error: expected ')' at end of input /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:597:3: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:597:3: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/media/usb/b2c2/flexcop-usb.c:393:3: error: implicit declaration of function 'pci_free_consistent' [-Werror=implicit-function-declaration] /home/broonie/build/linux-stable/drivers/media/usb/b2c2/flexcop-usb.c:410:2: error: implicit declaration of function 'pci_alloc_consistent' [-Werror=implicit-function-declaration] /home/broonie/build/linux-stable/drivers/parport/parport_pc.c:67:25: fatal error: asm/parport.h: No such file or directory /home/broonie/build/linux-stable/drivers/staging/lustre/lustre/llite/lloop.c:527:78: error: duplicate case value /home/broonie/build/linux-stable/drivers/staging/lustre/lustre/llite/lloop.c:527:18: error: previously used here Warnings: /home/broonie/build/linux-stable/sound/soc/fsl/imx-audmux.c:70:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable/sound/soc/fsl/imx-audmux.c:161:7: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] /home/broonie/build/linux-stable/drivers/dma/amba-pl08x.c:1041:4: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'size_t' [-Wformat=] /home/broonie/build/linux-stable/drivers/dma/amba-pl08x.c:1693:2: warning: format '%d' expects argument of type 'int', but argument 5 has type 'size_t' [-Wformat=] /home/broonie/build/linux-stable/drivers/dma/amba-pl08x.c:1693:2: warning: format '%d' expects argument of type 'int', but argument 6 has type 'size_t' [-Wformat=] /home/broonie/build/linux-stable/drivers/dma/pl330.c:2317:21: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable/drivers/gpio/gpio-mcp23s08.c:643:10: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable/net/core/secure_seq.c:30:4: warning: value computed is not used [-Wunused-value] /home/broonie/build/linux-stable/drivers/iio/adc/exynos_adc.c:112:9: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable/drivers/hwmon/sht21.c:92:12: warning: 'sht21_update_measurements' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:614:9: warning: unused variable 'config' [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:4: warning: no return statement in function returning non-void [-Wreturn-type] /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:128:26: warning: 'smsc47m192_driver' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/thmc50.c:94:28: warning: 'thmc50_update_device' used but never defined [enabled by default] /home/broonie/build/linux-stable/drivers/hwmon/thmc50.c:103:26: warning: 'thmc50_driver' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:110:259: warning: 'sensor_dev_attr_in4_label' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:111:39: warning: 'sensor_dev_attr_in5_input' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:111:256: warning: 'sensor_dev_attr_in5_label' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:112:39: warning: 'sensor_dev_attr_in6_input' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:112:257: warning: 'sensor_dev_attr_in6_label' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:113:39: warning: 'sensor_dev_attr_in7_input' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:113:257: warning: 'sensor_dev_attr_in7_label' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:114:39: warning: 'sensor_dev_attr_in8_input' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:114:262: warning: 'sensor_dev_attr_in8_label' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:116:39: warning: 'sensor_dev_attr_temp1_input' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:118:39: warning: 'sensor_dev_attr_temp1_label' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:124:39: warning: 'sensor_dev_attr_temp2_input' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:126:39: warning: 'sensor_dev_attr_temp2_label' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:129:26: warning: 'wm831x_attributes' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/pmbus/pmbus.c:99:6: warning: unused variable 'ret' [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/pmbus/pmbus.c:115:4: warning: no return statement in function returning non-void [-Wreturn-type] /home/broonie/build/linux-stable/drivers/hwmon/pmbus/pmbus.c:33:13: warning: 'pmbus_find_sensor_groups' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/hwmon/pmbus/pmbus.c:96:12: warning: 'pmbus_identify' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/input/input-mt.c:274:12: warning: 'adjust_dual' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:171:2: warning: #warning Precise timer not defined for this architecture. [-Wcpp] /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:583:15: warning: unused variable 'v' [-Wunused-variable] /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:583:12: warning: unused variable 'u' [-Wunused-variable] /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:583:6: warning: unused variable 'i' [-Wunused-variable] /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:597:3: warning: no return statement in function returning non-void [-Wreturn-type] /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:307:13: warning: 'analog_poll' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:428:12: warning: 'analog_init_device' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:520:12: warning: 'analog_init_masks' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:581:12: warning: 'analog_init_port' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/input/misc/xen-kbdfront.c:258:8: warning: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'long long unsigned int' [-Wformat=] /home/broonie/build/linux-stable/drivers/media/radio/radio-shark.c:274:13: warning: 'shark_resume_leds' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/media/radio/radio-shark2.c:240:13: warning: 'shark_resume_leds' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/media/usb/b2c2/flexcop-usb.c:410:21: warning: assignment makes pointer from integer without a cast [enabled by default] /home/broonie/build/linux-stable/net/netfilter/nf_conntrack_core.c:674:3: warning: value computed is not used [-Wunused-value] /home/broonie/build/linux-stable/drivers/mfd/arizona-core.c:509:10: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable/drivers/mfd/tps65217.c:173:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable/net/netfilter/xt_connlimit.c:234:4: warning: value computed is not used [-Wunused-value] /home/broonie/build/linux-stable/drivers/net/ethernet/smsc/smc91x.c:1899:7: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable/drivers/net/xen-netback/interface.c:241:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] /home/broonie/build/linux-stable/drivers/net/xen-netfront.c:1858:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] /home/broonie/build/linux-stable/drivers/net/wireless/cw1200/sta.c:142:4: warning: value computed is not used [-Wunused-value] /home/broonie/build/linux-stable/drivers/net/wireless/cw1200/scan.c:330:4: warning: value computed is not used [-Wunused-value] /home/broonie/build/linux-stable/drivers/power/reset/xgene-reboot.c:80:17: warning: assignment from incompatible pointer type [enabled by default] /home/broonie/build/linux-stable/drivers/net/wireless/ti/wlcore/spi.c:317:1: warning: the frame size of 9728 bytes is larger than 2048 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/regulator/tps62360-regulator.c:363:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable/drivers/spi/spi-atmel.c:1335:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable/drivers/spi/spi-atmel.c:1460:18: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable/drivers/spi/spi-gpio.c:252:8: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable/drivers/spi/spi-pl022.c:1423:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] /home/broonie/build/linux-stable/drivers/staging/bcm/CmHost.c:1387:39: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] /home/broonie/build/linux-stable/drivers/staging/bcm/CmHost.c:1426:37: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] /home/broonie/build/linux-stable/drivers/staging/bcm/CmHost.c:1440:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] /home/broonie/build/linux-stable/drivers/video/xen-fbfront.c:589:8: warning: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'long long unsigned int' [-Wformat=] /home/broonie/build/linux-stable/drivers/usb/storage/realtek_cr.c:629:12: warning: 'config_autodelink_before_power_down' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/usb/storage/realtek_cr.c:699:13: warning: 'fw5895_init' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/staging/rts5139/rts51x.c:204:13: warning: 'rts51x_try_to_enter_ss' defined but not used [-Wunused-function] ------------------------------------------------------------------------------- arm-multi_v7_defconfig : FAIL, 1 errors, 1 warnings, 0 section mismatches Errors: /home/broonie/build/linux-stable/drivers/input/input-mt.c:303:1: error: expected identifier or '(' at end of input Warnings: /home/broonie/build/linux-stable/drivers/input/input-mt.c:274:12: warning: 'adjust_dual' defined but not used [-Wunused-function] ------------------------------------------------------------------------------- x86_64-defconfig : FAIL, 1 errors, 2 warnings, 0 section mismatches Errors: /home/broonie/build/linux-stable/drivers/input/input-mt.c:303:1: error: expected identifier or '(' at end of input Warnings: /home/broonie/build/linux-stable/drivers/char/hw_random/via-rng.c:224:26: warning: 'via_rng_cpu_id' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/input/input-mt.c:274:12: warning: 'adjust_dual' defined but not used [-Wunused-function] ------------------------------------------------------------------------------- arm-allmodconfig : FAIL, 38 errors, 88 warnings, 1 section mismatches Errors: /home/broonie/build/linux-stable/drivers/hwspinlock/omap_hwspinlock.c:158:2: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/hwmon/sht21.c:132:1: error: expected '=', ',', ';', 'asm' or '__attribute__' at end of input /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:8: error: 'struct smsc47m192_data' has no member named 'temp_' /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:4: error: expected ';' at end of input /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:4: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:4: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:4: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/hwmon/thmc50.c:416:39: error: expected '{' at end of input /home/broonie/build/linux-stable/drivers/hwmon/twl4030-madc-hwmon.c:123:1: error: expected identifier or '(' at end of input /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:137:28: error: 'struct sensor_device_attribute' has no member named 'dev_a' /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:137:2: error: expected '}' at end of input /home/broonie/build/linux-stable/drivers/hwmon/pmbus/pmbus.c:115:4: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/hwmon/pmbus/pmbus.c:115:4: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/hwmon/pmbus/pmbus.c:115:4: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/input/input-mt.c:303:1: error: expected identifier or '(' at end of input /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:597:17: error: 'p' undeclared (first use in this function) /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:597:3: error: expected ')' at end of input /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:597:3: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:597:3: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/infiniband/core/mad_priv.h:36:0: error: unterminated #ifndef /home/broonie/build/linux-stable/drivers/infiniband/core/mad_rmpp.h:36:1: error: expected ':', ',', ';', '}' or '__attribute__' before 'enum' /home/broonie/build/linux-stable/drivers/infiniband/core/mad_priv.h:36:0: error: unterminated #ifndef /home/broonie/build/linux-stable/drivers/infiniband/core/agent.c:48:1: error: expected ':', ',', ';', '}' or '__attribute__' before 'struct' /home/broonie/build/linux-stable/drivers/infiniband/core/agent.c:128:3: error: missing terminating " character /home/broonie/build/linux-stable/drivers/infiniband/core/mad_priv.h:36:0: error: unterminated #ifndef /home/broonie/build/linux-stable/drivers/infiniband/core/mad_rmpp.h:36:1: error: expected ':', ',', ';', '}' or '__attribute__' before 'enum' /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:1148:29: error: 'stru' undeclared (first use in this function) /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:1148:7: error: expected ')' at end of input /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:1147:13: error: too few arguments to function 'kzalloc' /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:1148:7: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/infiniband/hw/amso1100/c2_cq.c:323:17: error: 'cpu_to_be6' undeclared (first use in this function) /home/broonie/build/linux-stable/drivers/infiniband/hw/amso1100/c2_cq.c:323:2: error: expected ';' at end of input /home/broonie/build/linux-stable/drivers/infiniband/hw/amso1100/c2_cq.c:323:2: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/infiniband/hw/amso1100/c2_cq.c:314:3: error: label 'bail1' used but not defined /home/broonie/build/linux-stable/drivers/infiniband/hw/amso1100/c2_cq.c:309:3: error: label 'bail0' used but not defined /home/broonie/build/linux-stable/drivers/infiniband/hw/mthca/mthca_mad.c:259:3: error: expected ';' at end of input /home/broonie/build/linux-stable/drivers/infiniband/hw/mthca/mthca_mad.c:259:3: error: expected declaration or statement at end of input /home/broonie/build/linux-stable/drivers/infiniband/hw/mthca/mthca_mad.c:259:3: error: expected declaration or statement at end of input Warnings: /home/broonie/build/linux-stable/arch/arm/mach-cns3xxx/pcie.c:350:1: warning: the frame size of 1072 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/block/mtip32xx/mtip32xx.c:2898:1: warning: the frame size of 1040 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/block/mtip32xx/mtip32xx.c:2921:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/block/mtip32xx/mtip32xx.c:2827:1: warning: the frame size of 1080 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/gpu/drm/radeon/cypress_dpm.c:302:31: warning: unused variable 'eg_pi' [-Wunused-variable] /home/broonie/build/linux-stable/drivers/gpu/drm/radeon/ni_dpm.c:3448:31: warning: unused variable 'eg_pi' [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwspinlock/omap_hwspinlock.c:81:12: warning: 'omap_hwspinlock_probe' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/hwspinlock/omap_hwspinlock.c:145:12: warning: 'omap_hwspinlock_remove' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/hwmon/sht21.c:92:12: warning: 'sht21_update_measurements' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:614:9: warning: unused variable 'config' [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:648:4: warning: no return statement in function returning non-void [-Wreturn-type] /home/broonie/build/linux-stable/drivers/hwmon/smsc47m192.c:128:26: warning: 'smsc47m192_driver' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/thmc50.c:94:28: warning: 'thmc50_update_device' used but never defined /home/broonie/build/linux-stable/drivers/hwmon/thmc50.c:103:26: warning: 'thmc50_driver' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/twl4030-madc-hwmon.c:99:12: warning: 'twl4030_madc_hwmon_probe' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:110:259: warning: 'sensor_dev_attr_in4_label' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:111:39: warning: 'sensor_dev_attr_in5_input' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:111:256: warning: 'sensor_dev_attr_in5_label' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:112:39: warning: 'sensor_dev_attr_in6_input' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:112:257: warning: 'sensor_dev_attr_in6_label' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:113:39: warning: 'sensor_dev_attr_in7_input' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:113:257: warning: 'sensor_dev_attr_in7_label' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:114:39: warning: 'sensor_dev_attr_in8_input' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:114:262: warning: 'sensor_dev_attr_in8_label' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:116:39: warning: 'sensor_dev_attr_temp1_input' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:118:39: warning: 'sensor_dev_attr_temp1_label' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:124:39: warning: 'sensor_dev_attr_temp2_input' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:126:39: warning: 'sensor_dev_attr_temp2_label' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/wm831x-hwmon.c:129:26: warning: 'wm831x_attributes' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/pmbus/pmbus.c:99:6: warning: unused variable 'ret' [-Wunused-variable] /home/broonie/build/linux-stable/drivers/hwmon/pmbus/pmbus.c:115:4: warning: no return statement in function returning non-void [-Wreturn-type] /home/broonie/build/linux-stable/drivers/hwmon/pmbus/pmbus.c:33:13: warning: 'pmbus_find_sensor_groups' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/hwmon/pmbus/pmbus.c:96:12: warning: 'pmbus_identify' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/input/input-mt.c:274:12: warning: 'adjust_dual' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:583:15: warning: unused variable 'v' [-Wunused-variable] /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:583:12: warning: unused variable 'u' [-Wunused-variable] /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:583:6: warning: unused variable 'i' [-Wunused-variable] /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:597:3: warning: no return statement in function returning non-void [-Wreturn-type] /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:307:13: warning: 'analog_poll' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:428:12: warning: 'analog_init_device' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:520:12: warning: 'analog_init_masks' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:581:12: warning: 'analog_init_port' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/infiniband/core/agent.c:128:24: warning: missing terminating " character /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:1135:12: warning: unused variable 'i' [-Wunused-variable] /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:135:13: warning: 'ib_umad_remove_one' used but never defined /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:145:25: warning: 'ib_umad_dev_ktype' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:951:25: warning: 'umad_client' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:981:38: warning: 'class_attr_abi_version' defined but not used [-Wunused-variable] /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:1006:12: warning: 'ib_umad_init_port' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/infiniband/core/user_mad.c:1096:13: warning: 'ib_umad_kill_port' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/infiniband/hw/amso1100/c2_cq.c:291:16: warning: unused variable 'peer_pa' [-Wunused-variable] /home/broonie/build/linux-stable/drivers/infiniband/hw/amso1100/c2_cq.c:290:29: warning: unused variable 'reply' [-Wunused-variable] /home/broonie/build/linux-stable/drivers/infiniband/hw/amso1100/c2_cq.c:257:13: warning: 'c2_free_cq_buf' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/infiniband/hw/amso1100/c2_cq.c:323:2: warning: control reaches end of non-void function [-Wreturn-type] /home/broonie/build/linux-stable/drivers/infiniband/hw/cxgb4/mem.c:79:25: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable/drivers/infiniband/hw/mthca/mthca_mad.c:105:13: warning: 'smp_snoop' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/infiniband/hw/mthca/mthca_mad.c:148:13: warning: 'node_desc_override' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/infiniband/hw/mthca/mthca_mad.c:259:3: warning: control reaches end of non-void function [-Wreturn-type] /home/broonie/build/linux-stable/drivers/isdn/hardware/mISDN/w6692.c:1181:75: warning: unsupported argument to '__builtin_return_address' /home/broonie/build/linux-stable/drivers/isdn/hardware/mISDN/mISDNipac.c:759:75: warning: unsupported argument to '__builtin_return_address' /home/broonie/build/linux-stable/net/sunrpc/xprtrdma/verbs.c:1774:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/misc/lkdtm.c:293:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/mtd/chips/cfi_cmdset_0020.c:654:1: warning: the frame size of 1192 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/mtd/nand/gpmi-nand/gpmi-nand.c:120:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/pinctrl/pinctrl-bcm2835.c:1060:2: warning: ignoring return value of 'gpiochip_remove', declared with attribute warn_unused_result [-Wunused-result] /home/broonie/build/linux-stable/drivers/pinctrl/pinctrl-bcm2835.c:1043:3: warning: ignoring return value of 'gpiochip_remove', declared with attribute warn_unused_result [-Wunused-result] /home/broonie/build/linux-stable/drivers/power/ab8500_charger.c:1390:4: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] /home/broonie/build/linux-stable/drivers/power/ab8500_charger.c:1559:4: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] /home/broonie/build/linux-stable/drivers/power/pm2301_charger.c:725:4: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] /home/broonie/build/linux-stable/drivers/net/ethernet/amd/nmclan_cs.c:625:3: warning: 'pcmcia_request_exclusive_irq' is deprecated (declared at /home/broonie/build/linux-stable/include/pcmcia/ds.h:213) [-Wdeprecated-declarations] /home/broonie/build/linux-stable/drivers/net/ethernet/dec/tulip/winbond-840.c:911:2: warning: #warning Processor architecture undefined [-Wcpp] /home/broonie/build/linux-stable/drivers/scsi/aic7xxx_old.c:7901:5: warning: case value '257' not in enumerated type 'ahc_chip' [-Wswitch] /home/broonie/build/linux-stable/drivers/scsi/aic7xxx_old.c:7898:5: warning: case value '513' not in enumerated type 'ahc_chip' [-Wswitch] /home/broonie/build/linux-stable/drivers/scsi/aic7xxx_old.c:8517:5: warning: case value '257' not in enumerated type 'ahc_chip' [-Wswitch] /home/broonie/build/linux-stable/drivers/scsi/aic7xxx_old.c:8510:5: warning: case value '513' not in enumerated type 'ahc_chip' [-Wswitch] /home/broonie/build/linux-stable/drivers/scsi/ips.c:210:2: warning: #warning "This driver has only been tested on the x86/ia64/x86_64 platforms" [-Wcpp] /home/broonie/build/linux-stable/drivers/tty/serial/efm32-uart.c:834:123: warning: 'efm32_uart_exit' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/staging/dgap/dgap_driver.c:982:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/staging/dgap/dgap_fep5.c:173:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/staging/dgap/dgap_fep5.c:112:1: warning: the frame size of 1040 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/staging/dgap/dgap_tty.c:664:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/staging/dgnc/dgnc_tty.c:613:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/video/aty/radeon_pm.c:1718:13: warning: 'radeon_reinitialize_M10' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/video/omap2/displays-new/panel-sony-acx565akm.c:608:25: warning: unused variable 'ddata' [-Wunused-variable] /home/broonie/build/linux-stable/drivers/staging/sm7xxfb/sm7xxfb.c:117:122: warning: 'sm7xx_vga_setup' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/staging/vt6655/device_main.c:3257:1: warning: the frame size of 1864 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/staging/vt6655/iwctl.c:758:1: warning: the frame size of 1280 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/staging/wlan-ng/prism2fw.c:795:1: warning: the frame size of 1072 bytes is larger than 1024 bytes [-Wframe-larger-than=] Section Mismatches: WARNING: drivers/cpuidle/built-in.o(.data+0x938): Section mismatch in reference from the variable dbx500_cpuidle_plat_driver to the function .init.text:dbx500_cpuidle_probe() ------------------------------------------------------------------------------- arm-allnoconfig : FAIL, 1 errors, 1 warnings, 0 section mismatches Errors: /home/broonie/build/linux-stable/drivers/input/input-mt.c:303:1: error: expected identifier or '(' at end of input Warnings: /home/broonie/build/linux-stable/drivers/input/input-mt.c:274:12: warning: 'adjust_dual' defined but not used [-Wunused-function] ------------------------------------------------------------------------------- x86_64-allnoconfig : FAIL, 1 errors, 3 warnings, 0 section mismatches Errors: /home/broonie/build/linux-stable/drivers/input/input-mt.c:303:1: error: expected identifier or '(' at end of input Warnings: /home/broonie/build/linux-stable/drivers/base/topology.c:83:118: warning: unused variable 'cpu' [-Wunused-variable] /home/broonie/build/linux-stable/drivers/base/topology.c:86:106: warning: unused variable 'cpu' [-Wunused-variable] /home/broonie/build/linux-stable/drivers/input/input-mt.c:274:12: warning: 'adjust_dual' defined but not used [-Wunused-function] ------------------------------------------------------------------------------- arm64-defconfig : FAIL, 1 errors, 3 warnings, 0 section mismatches Errors: /home/broonie/build/linux-stable/drivers/input/input-mt.c:303:1: error: expected identifier or '(' at end of input Warnings: /home/broonie/build/linux-stable/net/core/secure_seq.c:30:4: warning: value computed is not used [-Wunused-value] /home/broonie/build/linux-stable/drivers/input/input-mt.c:274:12: warning: 'adjust_dual' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/net/ethernet/smsc/smc91x.c:1899:7: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches:

10 years, 2 months

[PATCH] clk: gpio-gate: Ensure gpiod_ APIs are prototyped

by Mark Brown

The gpio-gate clock uses the gpiod_ APIs but does not directly include the header for them causing build failures in some configurations including ARM allnoconfig. Include the header directly. Signed-off-by: Mark Brown <broonie(a)kernel.org> --- drivers/clk/clk-gpio-gate.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/clk/clk-gpio-gate.c b/drivers/clk/clk-gpio-gate.c index 9dde88533684..08e43224fd52 100644 --- a/drivers/clk/clk-gpio-gate.c +++ b/drivers/clk/clk-gpio-gate.c @@ -13,6 +13,7 @@ #include <linux/module.h> #include <linux/slab.h> #include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/of_gpio.h> #include <linux/err.h> #include <linux/device.h> -- 2.1.1

10 years, 2 months

stable boot: 47 boots: 47 pass, 0 fail (v3.12.29)

by Kevin's boot bot

Status report database: http://status.armcloud.us/boot/all/job/stable/kernel/v3.12.29/ Tree/Branch: stable Git describe: v3.12.29 Full Report =========== arm-davinci_all_defconfig ------------------------- dm365evm,legacy 0 min 18.4 sec: PASS arm-tegra_defconfig ------------------- tegra30-beaver 0 min 18.0 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- armada-xp-openblocks-ax3-4 0 min 22.4 sec: PASS vexpress-v2p-ca15 0 min 5.2 sec: PASS sun7i-a20-cubieboard2 0 min 14.3 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 18.4 sec: PASS imx6dl-wandboard,wand-solo 0 min 18.2 sec: PASS imx6q-wandboard 0 min 16.8 sec: PASS arm-omap2plus_defconfig ----------------------- am335x-boneblack 0 min 25.5 sec: PASS omap3-beagle-xm 1 min 1.5 sec: PASS omap3-beagle-xm,legacy 0 min 53.8 sec: PASS omap4-panda 1 min 13.0 sec: PASS am335x-bone 0 min 27.1 sec: PASS omap3-beagle,legacy 0 min 45.2 sec: PASS omap3-overo-storm-tobi,legacy 0 min 26.5 sec: PASS omap4-panda-es 1 min 9.9 sec: PASS omap3-n900,legacy 0 min 53.6 sec: PASS omap3-beagle 0 min 35.8 sec: PASS omap3-overo-tobi,legacy 0 min 23.9 sec: PASS arm-multi_v7_defconfig ---------------------- ste-snowball 0 min 21.9 sec: PASS tegra30-beaver 0 min 14.7 sec: PASS am335x-boneblack 0 min 33.4 sec: PASS omap3-beagle-xm 0 min 59.9 sec: PASS sun7i-a20-cubieboard2 0 min 15.1 sec: PASS armada-370-mirabox 0 min 21.1 sec: PASS sun4i-a10-cubieboard 0 min 15.1 sec: PASS armada-xp-openblocks-ax3-4 0 min 23.2 sec: PASS vexpress-v2p-ca9 0 min 4.5 sec: PASS bcm28155-ap 0 min 25.5 sec: PASS imx6dl-wandboard,wand-solo 0 min 18.8 sec: PASS am335x-bone 0 min 35.0 sec: PASS omap3-beagle 0 min 35.7 sec: PASS omap4-panda 1 min 1.9 sec: PASS imx6q-wandboard 0 min 18.0 sec: PASS omap4-panda-es 1 min 5.3 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.7 sec: PASS zynq-zc702 0 min 18.2 sec: PASS vexpress-v2p-ca15 0 min 5.2 sec: PASS arm-vexpress_defconfig ---------------------- vexpress-v2p-ca9 0 min 4.1 sec: PASS vexpress-v2p-ca15 0 min 5.1 sec: PASS vexpress-v2p-ca9,legacy 0 min 4.1 sec: PASS arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 22.1 sec: PASS armada-370-mirabox 0 min 18.0 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 24.2 sec: PASS arm-exynos_defconfig -------------------- exynos5250-arndale 0 min 32.2 sec: PASS arm64-defconfig --------------- qemu-aarch64,legacy 0 min 5.2 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 18.4 sec: PASS

10 years, 2 months

rmk boot: 88 boots: 88 pass, 0 fail (v3.17-rc5-31-g49e3711)

by Kevin's boot bot

Status report database: http://status.armcloud.us/boot/all/job/rmk/kernel/v3.17-rc5-31-g49e3711/ Tree/Branch: rmk Git describe: v3.17-rc5-31-g49e3711 Full Report =========== arm-shmobile_defconfig ---------------------- emev2-kzm9d 0 min 26.4 sec: PASS arm-davinci_all_defconfig ------------------------- dm365evm,legacy 0 min 19.6 sec: PASS da850-evm 0 min 17.2 sec: PASS arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 23.1 sec: PASS tegra30-beaver 0 min 21.1 sec: PASS arm64-defconfig --------------- qemu-aarch64,legacy 0 min 6.0 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 22.7 sec: PASS sun7i-a20-cubieboard2 0 min 13.6 sec: PASS exynos5420-arndale-octa 0 min 46.8 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.2 sec: PASS exynos5410-smdk5410 0 min 23.0 sec: PASS exynos5800-peach-pi 0 min 36.2 sec: PASS omap5-uevm 0 min 58.0 sec: PASS (Warnings: 1) exynos5422-odroid-xu3 0 min 29.5 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 45.0 sec: PASS vexpress-v2p-ca15 0 min 5.5 sec: PASS arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 23.6 sec: PASS armada-370-mirabox 0 min 18.6 sec: PASS arm-versatile_defconfig ----------------------- versatilepb,legacy 0 min 3.9 sec: PASS arm-multi_v7_defconfig ---------------------- am335x-boneblack 0 min 25.4 sec: PASS armada-370-mirabox 0 min 19.9 sec: PASS sun4i-a10-cubieboard 0 min 20.9 sec: PASS imx6dl-wandboard,wand-solo 0 min 20.2 sec: PASS am335x-bone 0 min 28.2 sec: PASS tegra124-jetson-tk1 0 min 22.8 sec: PASS sun7i-a20-cubieboard2 0 min 13.7 sec: PASS exynos5410-smdk5410 0 min 23.1 sec: PASS omap4-panda 0 min 54.5 sec: PASS imx6q-wandboard 0 min 18.7 sec: PASS imx6dl-wandboard,wand-dual 0 min 20.1 sec: PASS vexpress-v2p-ca15 0 min 5.6 sec: PASS ste-snowball 0 min 26.4 sec: PASS tegra30-beaver 0 min 18.3 sec: PASS omap3-n900 0 min 27.7 sec: PASS qcom-apq8074-dragonboard 0 min 21.1 sec: PASS bcm28155-ap 0 min 28.3 sec: PASS exynos5800-peach-pi 0 min 38.4 sec: PASS omap3-overo-tobi 0 min 27.9 sec: PASS exynos5422-odroid-xu3 0 min 31.7 sec: PASS (Warnings: 1) omap3-overo-storm-tobi 0 min 30.7 sec: PASS omap3-beagle-xm 0 min 52.4 sec: PASS exynos5420-arndale-octa 0 min 46.8 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.4 sec: PASS vexpress-v2p-ca9 0 min 4.7 sec: PASS omap3-beagle 0 min 37.0 sec: PASS omap5-uevm 0 min 58.2 sec: PASS (Warnings: 1) omap4-panda-es 0 min 58.1 sec: PASS exynos5250-arndale 0 min 52.2 sec: PASS zynq-zc702 0 min 22.9 sec: PASS am437x-gp-evm 0 min 20.4 sec: PASS arm-vexpress_defconfig ---------------------- vexpress-v2p-ca9 0 min 4.7 sec: PASS vexpress-v2p-ca15 0 min 5.5 sec: PASS vexpress-v2p-ca9,legacy 0 min 4.5 sec: PASS arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 26.6 sec: PASS armada-370-mirabox 0 min 20.3 sec: PASS arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard 0 min 19.5 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 24.6 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 33.1 sec: PASS (Warnings: 1) exynos5422-odroid-xu3 0 min 26.9 sec: PASS (Warnings: 1) exynos5250-arndale 1 min 3.6 sec: PASS exynos5410-smdk5410 0 min 22.4 sec: PASS exynos5800-peach-pi 0 min 26.7 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 20.2 sec: PASS imx6dl-wandboard,wand-solo 0 min 20.7 sec: PASS imx6q-wandboard 0 min 20.6 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 0 min 24.5 sec: PASS arm-omap2plus_defconfig ----------------------- omap3-overo-storm-tobi,legacy 0 min 26.4 sec: PASS omap3-beagle-xm 1 min 0.5 sec: PASS omap3-n900 0 min 20.4 sec: PASS omap3-beagle-xm,legacy 0 min 56.9 sec: PASS omap4-panda 1 min 11.6 sec: PASS am437x-gp-evm 0 min 18.1 sec: PASS omap3-overo-tobi 0 min 25.7 sec: PASS am335x-bone 0 min 28.1 sec: PASS omap3-overo-storm-tobi 0 min 29.1 sec: PASS omap3-beagle,legacy 0 min 36.9 sec: PASS (Warnings: 1) am335x-boneblack 0 min 26.2 sec: PASS omap5-uevm 1 min 12.5 sec: PASS (Warnings: 1) omap4-panda-es 1 min 14.7 sec: PASS omap3-n900,legacy 0 min 48.6 sec: PASS (Warnings: 2) omap3-beagle 0 min 41.5 sec: PASS omap3-overo-tobi,legacy 0 min 24.2 sec: PASS (Warnings: 1) arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 13.4 sec: PASS sun4i-a10-cubieboard 0 min 15.4 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 23.8 sec: PASS armada-370-mirabox 0 min 21.2 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 18.4 sec: PASS at91-sama5d3_xplained 0 min 43.5 sec: PASS

10 years, 2 months

next-20140930 build: 1 failures 31 warnings (next-20140930)

by Build bot for Mark Brown

Tree/Branch: next-20140930 Git describe: next-20140930 Commit: cb4b16caa8 Add linux-next specific files for 20140930 Build Time: 65 min 31 sec Passed: 7 / 8 ( 87.50 %) Failed: 1 / 8 ( 12.50 %) Errors: 6 Warnings: 31 Section Mismatches: 0 Failed defconfigs: arm64-allnoconfig Errors: arm64-allnoconfig ../drivers/clk/clk-gpio-gate.c:36:2: error: implicit declaration of function 'gpiod_set_value' [-Werror=implicit-function-declaration] ../drivers/clk/clk-gpio-gate.c:52:2: error: implicit declaration of function 'gpiod_get_value' [-Werror=implicit-function-declaration] ../drivers/clk/clk-gpio-gate.c:79:2: error: implicit declaration of function 'gpiod_is_active_low' [-Werror=implicit-function-declaration] ../drivers/clk/clk-gpio-gate.c:85:3: error: implicit declaration of function 'desc_to_gpio' [-Werror=implicit-function-declaration] ../drivers/clk/clk-gpio-gate.c:125:2: error: implicit declaration of function 'gpiod_put' [-Werror=implicit-function-declaration] ../drivers/clk/clk-gpio-gate.c:169:2: error: implicit declaration of function 'gpio_to_desc' [-Werror=implicit-function-declaration] ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): 3 warnings 0 mismatches : arm64-allnoconfig 12 warnings 0 mismatches : arm64-allmodconfig 4 warnings 0 mismatches : arm-multi_v7_defconfig 21 warnings 0 mismatches : arm-allmodconfig 2 warnings 0 mismatches : arm-allnoconfig 1 warnings 0 mismatches : x86_64-allnoconfig 2 warnings 0 mismatches : arm64-defconfig ------------------------------------------------------------------------------- Errors summary: 6 1 ../drivers/clk/clk-gpio-gate.c:85:3: error: implicit declaration of function 'desc_to_gpio' [-Werror=implicit-function-declaration] 1 ../drivers/clk/clk-gpio-gate.c:79:2: error: implicit declaration of function 'gpiod_is_active_low' [-Werror=implicit-function-declaration] 1 ../drivers/clk/clk-gpio-gate.c:52:2: error: implicit declaration of function 'gpiod_get_value' [-Werror=implicit-function-declaration] 1 ../drivers/clk/clk-gpio-gate.c:36:2: error: implicit declaration of function 'gpiod_set_value' [-Werror=implicit-function-declaration] 1 ../drivers/clk/clk-gpio-gate.c:169:2: error: implicit declaration of function 'gpio_to_desc' [-Werror=implicit-function-declaration] 1 ../drivers/clk/clk-gpio-gate.c:125:2: error: implicit declaration of function 'gpiod_put' [-Werror=implicit-function-declaration] Warnings Summary: 31 6 ../drivers/of/of_reserved_mem.c:259:3: warning: 'return' with no value, in function returning non-void [-Wreturn-type] 6 ../drivers/of/of_reserved_mem.c:253:3: warning: 'return' with no value, in function returning non-void [-Wreturn-type] 3 warning: (VIDEO_TIMBERDALE) selects TIMB_DMA which has unmet direct dependencies (DMADEVICES && MFD_TIMBERDALE) 2 ../include/linux/dynamic_debug.h:78:3: warning: unsupported argument to '__builtin_return_address' 2 ../drivers/pinctrl/nomadik/pinctrl-abx500.c:1208:11: warning: unused variable 'err' [-Wunused-variable] 1 arch/arm/configs/multi_v7_defconfig:443:warning: override: reassigning to symbol CPU_FREQ 1 ../net/rds/iw_rdma.c:200:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 ../lib/lz4/lz4hc_compress.c:514:1: warning: the frame size of 1480 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 ../include/uapi/linux/swab.h:13:15: warning: integer overflow in expression [-Woverflow] 1 ../include/linux/kernel.h:706:17: warning: comparison of distinct pointer types lacks a cast 1 ../fs/btrfs/extent_io.c:2166:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 ../drivers/usb/renesas_usbhs/common.c:469:25: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 ../drivers/usb/gadget/udc/udc-xilinx.c:2135:191: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 ../drivers/staging/vt6655/device_main.c:2993:1: warning: the frame size of 1304 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 ../drivers/staging/rtl8192ee/pci.c:879:5: warning: format '%d' expects argument of type 'int', but argument 3 has type 'sk_buff_data_t' [-Wformat=] 1 ../drivers/staging/rtl8192ee/pci.c:879:5: warning: format '%d' expects argument of type 'int', but argument 2 has type 'sk_buff_data_t' [-Wformat=] 1 ../drivers/staging/media/omap24xx/omap24xxcam-dma.c:478:4: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement] 1 ../drivers/staging/bcm/CmHost.c:1564:3: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 ../drivers/staging/bcm/CmHost.c:1546:3: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 ../drivers/staging/bcm/CmHost.c:1503:3: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 ../drivers/scsi/ips.c:210:2: warning: #warning "This driver has only been tested on the x86/ia64/x86_64 platforms" [-Wcpp] 1 ../drivers/net/ethernet/mellanox/mlx5/core/debugfs.c:467:46: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 ../drivers/net/ethernet/mellanox/mlx5/core/debugfs.c:307:11: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 ../drivers/net/ethernet/mellanox/mlx5/core/debugfs.c:303:11: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 ../drivers/net/ethernet/dec/tulip/winbond-840.c:910:2: warning: #warning Processor architecture undefined [-Wcpp] 1 ../drivers/mtd/chips/cfi_cmdset_0020.c:651:1: warning: the frame size of 1208 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 ../drivers/clk/clk-gpio-gate.c:169:8: warning: assignment makes pointer from integer without a cast [enabled by default] 1 ../drivers/block/drbd/drbd_bitmap.c:483:0: warning: "BITS_PER_PAGE_MASK" redefined [enabled by default] 1 ../drivers/block/drbd/drbd_bitmap.c:482:0: warning: "BITS_PER_PAGE" redefined [enabled by default] 1 ../arch/x86/kernel/cpu/perf_event_intel_uncore_snb.c:193:7: warning: 'pci_dword' is used uninitialized in this function [-Wuninitialized] 1 ../arch/arm/mach-cns3xxx/pcie.c:313:1: warning: the frame size of 1080 bytes is larger than 1024 bytes [-Wframe-larger-than=] =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- arm64-allnoconfig : FAIL, 6 errors, 3 warnings, 0 section mismatches Errors: ../drivers/clk/clk-gpio-gate.c:36:2: error: implicit declaration of function 'gpiod_set_value' [-Werror=implicit-function-declaration] ../drivers/clk/clk-gpio-gate.c:52:2: error: implicit declaration of function 'gpiod_get_value' [-Werror=implicit-function-declaration] ../drivers/clk/clk-gpio-gate.c:79:2: error: implicit declaration of function 'gpiod_is_active_low' [-Werror=implicit-function-declaration] ../drivers/clk/clk-gpio-gate.c:85:3: error: implicit declaration of function 'desc_to_gpio' [-Werror=implicit-function-declaration] ../drivers/clk/clk-gpio-gate.c:125:2: error: implicit declaration of function 'gpiod_put' [-Werror=implicit-function-declaration] ../drivers/clk/clk-gpio-gate.c:169:2: error: implicit declaration of function 'gpio_to_desc' [-Werror=implicit-function-declaration] Warnings: ../drivers/clk/clk-gpio-gate.c:169:8: warning: assignment makes pointer from integer without a cast [enabled by default] ../drivers/of/of_reserved_mem.c:253:3: warning: 'return' with no value, in function returning non-void [-Wreturn-type] ../drivers/of/of_reserved_mem.c:259:3: warning: 'return' with no value, in function returning non-void [-Wreturn-type] ------------------------------------------------------------------------------- arm64-allmodconfig : PASS, 0 errors, 12 warnings, 0 section mismatches Warnings: warning: (VIDEO_TIMBERDALE) selects TIMB_DMA which has unmet direct dependencies (DMADEVICES && MFD_TIMBERDALE) warning: (VIDEO_TIMBERDALE) selects TIMB_DMA which has unmet direct dependencies (DMADEVICES && MFD_TIMBERDALE) warning: (VIDEO_TIMBERDALE) selects TIMB_DMA which has unmet direct dependencies (DMADEVICES && MFD_TIMBERDALE) ../drivers/block/drbd/drbd_bitmap.c:482:0: warning: "BITS_PER_PAGE" redefined [enabled by default] ../drivers/block/drbd/drbd_bitmap.c:483:0: warning: "BITS_PER_PAGE_MASK" redefined [enabled by default] ../drivers/of/of_reserved_mem.c:253:3: warning: 'return' with no value, in function returning non-void [-Wreturn-type] ../drivers/of/of_reserved_mem.c:259:3: warning: 'return' with no value, in function returning non-void [-Wreturn-type] ../drivers/staging/bcm/CmHost.c:1503:3: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] ../drivers/staging/bcm/CmHost.c:1546:3: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] ../drivers/staging/bcm/CmHost.c:1564:3: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] ../drivers/usb/gadget/udc/udc-xilinx.c:2135:191: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] ../drivers/usb/renesas_usbhs/common.c:469:25: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] ------------------------------------------------------------------------------- arm-multi_v7_defconfig : PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: arch/arm/configs/multi_v7_defconfig:443:warning: override: reassigning to symbol CPU_FREQ ../drivers/of/of_reserved_mem.c:253:3: warning: 'return' with no value, in function returning non-void [-Wreturn-type] ../drivers/of/of_reserved_mem.c:259:3: warning: 'return' with no value, in function returning non-void [-Wreturn-type] ../drivers/pinctrl/nomadik/pinctrl-abx500.c:1208:11: warning: unused variable 'err' [-Wunused-variable] ------------------------------------------------------------------------------- arm-allmodconfig : PASS, 0 errors, 21 warnings, 0 section mismatches Warnings: ../arch/arm/mach-cns3xxx/pcie.c:313:1: warning: the frame size of 1080 bytes is larger than 1024 bytes [-Wframe-larger-than=] ../fs/btrfs/extent_io.c:2166:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] ../lib/lz4/lz4hc_compress.c:514:1: warning: the frame size of 1480 bytes is larger than 1024 bytes [-Wframe-larger-than=] ../net/rds/iw_rdma.c:200:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=] ../include/linux/kernel.h:706:17: warning: comparison of distinct pointer types lacks a cast ../include/linux/dynamic_debug.h:78:3: warning: unsupported argument to '__builtin_return_address' ../include/linux/dynamic_debug.h:78:3: warning: unsupported argument to '__builtin_return_address' ../drivers/mtd/chips/cfi_cmdset_0020.c:651:1: warning: the frame size of 1208 bytes is larger than 1024 bytes [-Wframe-larger-than=] ../drivers/of/of_reserved_mem.c:253:3: warning: 'return' with no value, in function returning non-void [-Wreturn-type] ../drivers/of/of_reserved_mem.c:259:3: warning: 'return' with no value, in function returning non-void [-Wreturn-type] ../drivers/pinctrl/nomadik/pinctrl-abx500.c:1208:11: warning: unused variable 'err' [-Wunused-variable] ../drivers/net/ethernet/dec/tulip/winbond-840.c:910:2: warning: #warning Processor architecture undefined [-Wcpp] ../drivers/net/ethernet/mellanox/mlx5/core/debugfs.c:303:11: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] ../drivers/net/ethernet/mellanox/mlx5/core/debugfs.c:307:11: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] ../drivers/net/ethernet/mellanox/mlx5/core/debugfs.c:467:46: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] ../include/uapi/linux/swab.h:13:15: warning: integer overflow in expression [-Woverflow] ../drivers/scsi/ips.c:210:2: warning: #warning "This driver has only been tested on the x86/ia64/x86_64 platforms" [-Wcpp] ../drivers/staging/media/omap24xx/omap24xxcam-dma.c:478:4: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement] ../drivers/staging/rtl8192ee/pci.c:879:5: warning: format '%d' expects argument of type 'int', but argument 2 has type 'sk_buff_data_t' [-Wformat=] ../drivers/staging/rtl8192ee/pci.c:879:5: warning: format '%d' expects argument of type 'int', but argument 3 has type 'sk_buff_data_t' [-Wformat=] ../drivers/staging/vt6655/device_main.c:2993:1: warning: the frame size of 1304 bytes is larger than 1024 bytes [-Wframe-larger-than=] ------------------------------------------------------------------------------- arm-allnoconfig : PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: ../drivers/of/of_reserved_mem.c:253:3: warning: 'return' with no value, in function returning non-void [-Wreturn-type] ../drivers/of/of_reserved_mem.c:259:3: warning: 'return' with no value, in function returning non-void [-Wreturn-type] ------------------------------------------------------------------------------- x86_64-allnoconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: ../arch/x86/kernel/cpu/perf_event_intel_uncore_snb.c:193:7: warning: 'pci_dword' is used uninitialized in this function [-Wuninitialized] ------------------------------------------------------------------------------- arm64-defconfig : PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: ../drivers/of/of_reserved_mem.c:253:3: warning: 'return' with no value, in function returning non-void [-Wreturn-type] ../drivers/of/of_reserved_mem.c:259:3: warning: 'return' with no value, in function returning non-void [-Wreturn-type] ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: x86_64-defconfig

10 years, 2 months

next boot: 42 passed 3 failed (next/next-20140925)

by Olof's autobooter

Full logs are available at http://arm-soc.lixom.net/bootlogs/next/next-20140925/ Failed boards: beaver arm-tegra_defconfig : BUILD FAILED colombus arm-sunxi_defconfig : FAILED 1:48.51 colombus arm-multi_v7_defconfig : FAILED 1:55.21 colombus arm-multi_lpae_defconfig : FAILED 1:54.70 dalmore arm-tegra_defconfig : BUILD FAILED jetsontk1 arm-tegra_defconfig : BUILD FAILED seaboard arm-tegra_defconfig : BUILD FAILED trimslice arm-tegra_defconfig : BUILD FAILED Successful boards: apc arm-vt8500_v6_v7_defconfig : passed 1:19.89 arndale arm-exynos_defconfig : passed 1:38.34 arndale arm-multi_v7_defconfig : passed 1:21.53 arndale arm-multi_lpae_defconfig : passed 1:22.79 bbb arm-omap2plus_defconfig : passed 1:35.20 bbb arm-multi_v7_defconfig : passed 1:09.41 beaver arm-multi_v7_defconfig : passed 1:00.56 capri arm-bcm_defconfig : passed 0:42.14 capri arm-multi_v7_defconfig : passed 0:42.41 cubie arm-sunxi_defconfig : passed 1:09.52 cubie arm-multi_v7_defconfig : passed 0:58.27 cubie2 arm-sunxi_defconfig : passed 1:08.28 cubie2 arm-multi_lpae_defconfig : passed 1:02.25 cubox arm-multi_v7_defconfig : passed 1:07.93 dalmore arm-multi_v7_defconfig : passed 1:15.48 dalmore arm-multi_lpae_defconfig : passed 1:19.13 hummingboard arm-imx_v6_v7_defconfig : passed 1:23.16 hummingboard arm-multi_v7_defconfig : passed 1:08.11 jetsontk1 arm-multi_v7_defconfig : passed 0:59.24 jetsontk1 arm-multi_lpae_defconfig : passed 1:12.37 odroidu3 arm-exynos_defconfig : passed 0:52.07 omap5uevm arm-omap2plus_defconfig : warnings 1:05.61 omap5uevm arm-multi_v7_defconfig : passed 1:07.60 omap5uevm arm-multi_lpae_defconfig : passed 1:16.92 pandaes arm-omap2plus_defconfig : warnings 1:29.42 pandaes arm-multi_v7_defconfig : passed 1:53.34 pi arm-exynos_defconfig : passed 0:56.91 pi arm-multi_v7_defconfig : passed 0:50.65 pi arm-multi_lpae_defconfig : passed 0:49.24 pit arm-exynos_defconfig : passed 0:55.93 pit arm-multi_v7_defconfig : passed 0:51.24 pit arm-multi_lpae_defconfig : passed 0:50.81 sama5 arm-sama5_defconfig : passed 1:54.59 seaboard arm-multi_v7_defconfig : passed 1:25.08 snow arm-exynos_defconfig : passed 1:03.39 snow arm-multi_v7_defconfig : passed 1:02.14 snow arm-multi_lpae_defconfig : passed 0:55.84 snowball arm-u8500_defconfig : passed 2:36.49 snowball arm-multi_v7_defconfig : passed 2:11.51 trimslice arm-multi_v7_defconfig : passed 1:08.59 wandboard arm-imx_v6_v7_defconfig : passed 1:12.61 wandboard arm-multi_v7_defconfig : passed 0:53.99 Offline boards: cubie2 arm-multi_v7_defconfig : OFFLINE 1:24.04 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board colombus-arm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.465039] sunxi-mmc 1c0f000.mmc: No vqmmc regulator found [ 1.471285] sunxi-mmc 1c0f000.mmc: Got CD GPIO [ 1.506868] sunxi-mmc 1c0f000.mmc: base:0xf009a000 irq:92 [ 1.512588] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.519425] usbcore: registered new interface driver usbhid [ 1.525211] usbhid: USB HID core driver [ 1.533367] TCP: cubic registered [ 1.536820] NET: Registered protocol family 17 [ 1.541470] can: controller area network core (rev 20120528 abi 9) [ 1.547957] NET: Registered protocol family 29 [ 1.552581] can: raw protocol (rev 20120528) [ 1.557020] can: broadcast manager protocol (rev 20120528 t) [ 1.562903] can: netlink gateway (rev 20130117) max_hops=1 [ 1.569038] Key type dns_resolver registered [ 1.573638] ThumbEE CPU extension supported. [ 1.578095] Registering SWP/SWPB emulation handler [ 1.584288] usb2-vbus: 5000 mV [ 1.589119] sun6i-a31-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver [ 1.597208] ehci-platform 1c1b000.usb: EHCI Host Controller [ 1.603026] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 1 [ 1.611308] ehci-platform 1c1b000.usb: irq 106, io mem 0x01c1b000 [ 1.625943] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00 [ 1.633117] hub 1-0:1.0: USB hub found [ 1.637046] hub 1-0:1.0: 1 port detected [ 1.641844] sun6i-rtc 1f00000.rtc: setting system clock to 1970-01-01 00:00:23 UTC (23) [ 1.653419] vcc5v0: disabling [ 1.656504] vcc3v3: disabling [ 1.659608] vcc3v0: disabling [ 1.662800] ALSA device list: [ 1.665873] No soundcards found. [ 1.670296] Waiting for root device /dev/mmcblk0p1... [ 1.957847] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 42.283347] random: nonblocking pool is initialized [PYBOOT] [colombus 01:52]: Timed out waiting for "<type 'str'>": [PYBOOT] [colombus 01:53]: got exception: timeout ~$off [PYBOOT] [colombus 01:54]: Done. ======================================================================== Board colombus-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.464964] sunxi-mmc 1c0f000.mmc: No vqmmc regulator found [ 1.471206] sunxi-mmc 1c0f000.mmc: Got CD GPIO [ 1.506878] sunxi-mmc 1c0f000.mmc: base:0xf009a000 irq:92 [ 1.512585] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.519401] usbcore: registered new interface driver usbhid [ 1.525177] usbhid: USB HID core driver [ 1.533302] TCP: cubic registered [ 1.536750] NET: Registered protocol family 17 [ 1.541393] can: controller area network core (rev 20120528 abi 9) [ 1.547867] NET: Registered protocol family 29 [ 1.552483] can: raw protocol (rev 20120528) [ 1.556917] can: broadcast manager protocol (rev 20120528 t) [ 1.562792] can: netlink gateway (rev 20130117) max_hops=1 [ 1.568929] Key type dns_resolver registered [ 1.573529] ThumbEE CPU extension supported. [ 1.577975] Registering SWP/SWPB emulation handler [ 1.584261] usb2-vbus: 5000 mV [ 1.589097] sun6i-a31-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver [ 1.597193] ehci-platform 1c1b000.usb: EHCI Host Controller [ 1.603026] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 1 [ 1.611322] ehci-platform 1c1b000.usb: irq 106, io mem 0x01c1b000 [ 1.625951] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00 [ 1.633134] hub 1-0:1.0: USB hub found [ 1.637076] hub 1-0:1.0: 1 port detected [ 1.641877] sun6i-rtc 1f00000.rtc: setting system clock to 1970-01-01 00:00:23 UTC (23) [ 1.653405] vcc5v0: disabling [ 1.656490] vcc3v3: disabling [ 1.659576] vcc3v0: disabling [ 1.662766] ALSA device list: [ 1.665839] No soundcards found. [ 1.670219] Waiting for root device /dev/mmcblk0p1... [ 1.957835] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 42.485585] random: nonblocking pool is initialized [PYBOOT] [colombus 01:52]: Timed out waiting for "<type 'str'>": [PYBOOT] [colombus 01:53]: got exception: timeout ~$off [PYBOOT] [colombus 01:54]: Done. ======================================================================== Board colombus-arm-sunxi_defconfig failure log: ------------------------------------------------- [ 0.328418] sun6i-a31-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.328589] sun6i-a31-r-pinctrl 1f02c00.pinctrl: Reset controller missing [ 0.328612] platform 1f02c00.pinctrl: Driver sun6i-a31-r-pinctrl requests probe deferral [ 0.381237] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.384028] console [ttyS0] disabled [ 0.404932] dw-apb-uart 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 32, base_baud = 1500000) is a U6_16550A [ 1.075273] console [ttyS0] enabled [ 1.081213] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.087982] ehci-platform: EHCI generic platform driver [ 1.093585] ehci-platform 1c1b000.usb: EHCI Host Controller [ 1.099385] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 1 [ 1.107565] ehci-platform 1c1b000.usb: irq 106, io mem 0x01c1b000 [ 1.132690] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00 [ 1.139815] hub 1-0:1.0: USB hub found [ 1.143751] hub 1-0:1.0: 1 port detected [ 1.148273] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.154737] ohci-platform: OHCI generic platform driver [ 1.160593] sun6i-rtc 1f00000.rtc: rtc core: registered rtc-sun6i as rtc0 [ 1.167636] sun6i-rtc 1f00000.rtc: RTC enabled [ 1.172401] i2c /dev entries driver [ 1.177528] sunxi-mmc 1c0f000.mmc: No vmmc regulator found [ 1.183213] sunxi-mmc 1c0f000.mmc: No vqmmc regulator found [ 1.189222] sunxi-mmc 1c0f000.mmc: Got CD GPIO [ 1.226215] sunxi-mmc 1c0f000.mmc: base:0xf00a4000 irq:92 [ 1.232600] usbcore: registered new interface driver usbhid [ 1.238380] usbhid: USB HID core driver [ 1.243329] TCP: cubic registered [ 1.246792] NET: Registered protocol family 17 [ 1.251551] Key type dns_resolver registered [ 1.256093] Registering SWP/SWPB emulation handler [ 1.263459] sun6i-a31-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver [ 1.270957] sun6i-rtc 1f00000.rtc: setting system clock to 1970-01-01 00:00:17 UTC (17) [ 1.283361] Waiting for root device /dev/mmcblk0p1... [PYBOOT] [colombus 01:45]: Timed out waiting for "<type 'str'>": [PYBOOT] [colombus 01:46]: got exception: timeout ~$off [PYBOOT] [colombus 01:48]: Done.

10 years, 2 months

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports September 2014