Kernel-build-reports April 2016

kernel-build-reports@lists.linaro.org

13 participants
510 discussions

mainline boot: 50 passed 31 failed (mainline/v4.6-rc5-71-g9453203)

by Olof's autobooter

Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.6-rc5-71-g9453203/ Failed boards: arndale arm-multi_v7_nosmp_defconfig : FAILED 2:31.59 bbb arm-omap2plus_defconfig : FAILED 1:54.17 bbb arm-multi_v7_defconfig : FAILED 1:57.41 bbb arm-multi_v7_nosmp_defconfig : FAILED 2:11.18 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:45.10 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:44.59 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:48.32 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 1:55.67 beaver arm-tegra_defconfig : FAILED 1:44.63 beaver arm-multi_v7_defconfig : FAILED 1:51.50 beaver arm-multi_v7_nosmp_defconfig : FAILED 1:56.03 colombus arm-multi_v7_nosmp_defconfig : FAILED 3:19.75 cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.40 cosmic arm-multi_v7_defconfig : FAILED 2:24.06 cosmic arm-multi_v7_nosmp_defconfig : FAILED 2:14.81 dalmore arm-tegra_defconfig : FAILED 1:48.63 dalmore arm-multi_v7_defconfig : FAILED 1:59.48 dalmore arm-multi_lpae_defconfig : FAILED 2:14.78 dalmore arm-multi_v7_nosmp_defconfig : FAILED 1:51.92 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:51.85 omap5uevm arm-multi_v7_defconfig : FAILED 0:47.97 omap5uevm arm-multi_lpae_defconfig : FAILED 0:51.76 omap5uevm arm-multi_v7_nosmp_defconfig : FAILED 2:11.08 seaboard arm-tegra_defconfig : FAILED 1:50.56 seaboard arm-multi_v7_defconfig : FAILED 1:58.37 seaboard arm-multi_v7_nosmp_defconfig : FAILED 1:54.04 snow arm-multi_v7_nosmp_defconfig : FAILED 3:13.22 snowball arm-u8500_defconfig : FAILED 1:56.26 snowball arm-multi_v7_defconfig : FAILED 2:11.32 snowball arm-multi_v7_nosmp_defconfig : FAILED 2:06.92 wandboard arm-imx_v6_v7_defconfig : FAILED 2:59.30 Successful boards: apc arm-vt8500_v6_v7_defconfig : passed 1:10.49 arndale arm-exynos_defconfig : passed 1:33.62 arndale arm-multi_v7_defconfig : passed 1:20.96 arndale arm-multi_lpae_defconfig : passed 1:53.78 capri arm-bcm_defconfig : passed 0:51.12 capri arm-multi_v7_defconfig : passed 0:54.18 capri arm-multi_v7_nosmp_defconfig : warnings 1:01.50 chitra powerpc-pasemi_defconfig : passed 2:11.09 chitra powerpc-ppc64_defconfig : passed 2:05.48 colombus arm-sunxi_defconfig : passed 2:34.90 colombus arm-multi_v7_defconfig : passed 2:42.12 colombus arm-multi_lpae_defconfig : passed 2:32.58 cubie arm-sunxi_defconfig : passed 0:51.06 cubie arm-multi_v7_defconfig : passed 0:47.23 cubie arm-multi_v7_nosmp_defconfig : passed 0:55.83 cubie2 arm-sunxi_defconfig : passed 1:02.32 cubie2 arm-multi_v7_defconfig : passed 0:51.66 cubie2 arm-multi_lpae_defconfig : passed 0:56.70 cubie2 arm-multi_v7_nosmp_defconfig : warnings 1:00.87 cubox arm-multi_v7_defconfig : passed 1:15.71 cubox arm-mvebu_v7_defconfig : passed 1:17.95 cubox arm-multi_v7_nosmp_defconfig : passed 0:59.56 hummingboard arm-imx_v6_v7_defconfig : passed 1:27.37 hummingboard arm-multi_v7_defconfig : passed 1:26.85 hummingboard arm-multi_v7_nosmp_defconfig : warnings 1:15.77 jetsontk1 arm-tegra_defconfig : passed 1:36.54 jetsontk1 arm-multi_v7_defconfig : passed 1:34.31 jetsontk1 arm-multi_lpae_defconfig : passed 1:43.31 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:38.91 omap5uevm arm-omap2plus_defconfig : passed 1:04.35 pandaes arm-omap2plus_defconfig : warnings 1:45.69 pandaes arm-multi_v7_defconfig : passed 1:47.42 pandaes arm-multi_v7_nosmp_defconfig : warnings 1:45.92 pi arm-exynos_defconfig : passed 2:18.11 pi arm-multi_v7_defconfig : passed 2:15.51 pi arm-multi_lpae_defconfig : passed 2:26.53 pi arm-multi_v7_nosmp_defconfig : warnings 2:08.58 pit arm-exynos_defconfig : passed 2:10.24 pit arm-multi_v7_defconfig : passed 2:15.25 pit arm-multi_lpae_defconfig : passed 2:12.40 pit arm-multi_v7_nosmp_defconfig : warnings 2:07.72 seattle arm64-defconfig : warnings 2:24.60 snow arm-exynos_defconfig : passed 2:11.07 snow arm-multi_v7_defconfig : passed 2:11.50 snow arm-multi_lpae_defconfig : passed 1:59.66 trimslice arm-tegra_defconfig : passed 1:33.49 trimslice arm-multi_v7_defconfig : passed 1:42.51 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:45.58 wandboard arm-multi_v7_defconfig : passed 1:14.90 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:20.67 Offline boards: colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:17.92 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:17.70 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 1:24.22 parallella arm-multi_v7_defconfig : OFFLINE 2:26.20 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:19.24 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:52.52 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:54.96 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:56.96 sama5 arm-sama5_defconfig : OFFLINE 2:20.59 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:19.21 socfpga arm-socfpga_defconfig : OFFLINE 2:19.42 socfpga arm-multi_v7_defconfig : OFFLINE 2:30.60 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:11.91 Board legend is available at http://arm-soc.lixom.net/boards.html Board arndale-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- [ 2.038266] ahci 122f0000.sata: couldn't get PHY in node sata: -517 [2926610988.568617] [ 0.000000] Booting Linux on physical CPU 0x0 [ 2.050356] [c1038dc0] *pgd=4100041e(bad) [ 0.000000] Linux version 4.6.0-rc5-00071-g9453203 (build@brutus) (gcc version 4.9.2 (GCC) ) #1 Wed Apr 27 09:31:24 PDT 2016 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c53c7d [ 2.072490] Modules linked in: [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Insignal Arndale evaluation board based on EXYNOS5250 [ 0.000000] cma: Reserved 64 MiB at 0xbc000000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Samsung CPU ID: 0x43520010 [ 0.000000] On node 0 totalpages: 520192 [ 0.000000] free_area_init_node: node 0, pgdat c10fd420, node_mem_map eeff7000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 192512 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327680 pages, LIFO batch:31 [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at /home/build/work/batch/arch/arm/kernel/devtree.c:149 arm_dt_init_cpu_maps+0xd4/0x130 [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.6.0-rc5-00071-g9453203 #1 [ 0.000000] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 0.000000] [<c030e900>] (unwind_backtrace) from [<c030b474>] (show_stack+0x10/0x14) [ 0.000000] [<c030b474>] (show_stack) from [<c0335db0>] (__warn+0xe4/0xfc) [ 0.000000] [<c0335db0>] (__warn) from [<c0335e00>] (warn_slowpath_fmt+0x38/0x48) [ 0.000000] [<c0335e00>] (warn_slowpath_fmt) from [<c0f040e8>] (arm_dt_init_cpu_maps+0xd4/0x130) [ 0.000000] [<c0f040e8>] (arm_dt_init_cpu_maps) from [<c0f03424>] (setup_arch+0x7b8/0x8ec) [ 0.000000] [<c0f03424>] (setup_arch) from [<c0f00944>] (start_kernel+0x68/0x370) [ 0.000000] [<c0f00944>] (start_kernel) from [<40208078>] (0x40208078) [ 0.000000] ---[ end trace cb88537fdc8fa200 ]--- [PYBOOT] [arndale 02:28]: Timed out waiting for "<type 'str'>": [PYBOOT] [arndale 02:29]: got exception: timeout ~$off [PYBOOT] [arndale 02:30]: Done. Board bbb-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.630610] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.640872] ledtrig-cpu: registered to indicate activity on CPUs [ 1.647950] usbcore: registered new interface driver usbhid [ 1.653874] usbhid: USB HID core driver [ 1.665911] NET: Registered protocol family 10 [ 1.672467] sit: IPv6 over IPv4 tunneling driver [ 1.678596] NET: Registered protocol family 17 [ 1.683366] can: controller area network core (rev 20120528 abi 9) [ 1.690014] NET: Registered protocol family 29 [ 1.694743] can: raw protocol (rev 20120528) [ 1.699271] can: broadcast manager protocol (rev 20120528 t) [ 1.705275] can: netlink gateway (rev 20130117) max_hops=1 [ 1.712034] Key type dns_resolver registered [ 1.716925] omap_voltage_late_init: Voltage driver support not added [ 1.725206] ThumbEE CPU extension supported. [ 1.729836] Registering SWP/SWPB emulation handler [ 1.772157] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.778698] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.786470] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.795161] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.803081] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.810909] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.818721] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.826074] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.834760] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 550000 KHz [ 1.842685] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz [ 1.852415] mmc1: new high speed MMC card at address 0001 [ 1.859630] hctosys: unable to open rtc device (rtc0) [ 1.872677] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.878725] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.885697] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.894526] mmcblk1: p1 p2 [ 1.900237] Waiting for root device /dev/mmcblk0p2... [PYBOOT] [bbb 01:54]: Timed out waiting for "<type 'str'>": [PYBOOT] [bbb 01:55]: got exception: timeout ~$off [PYBOOT] [bbb 01:56]: Done. Board bbb-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- [ 1.320318] sdhci: Secure Digital Host Controller Interface driver [ 1.326848] sdhci: Copyright(c) Pierre Ossman [ 1.332658] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.395488] Synopsys Designware Multimedia Card Interface Driver [ 1.402902] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.412155] ledtrig-cpu: registered to indicate activity on CPUs [ 1.418897] usbcore: registered new interface driver usbhid [ 1.424783] usbhid: USB HID core driver [ 1.434361] NET: Registered protocol family 10 [ 1.440835] sit: IPv6 over IPv4 tunneling driver [ 1.446710] NET: Registered protocol family 17 [ 1.451457] can: controller area network core (rev 20120528 abi 9) [ 1.458054] NET: Registered protocol family 29 [ 1.462748] can: raw protocol (rev 20120528) [ 1.467261] can: broadcast manager protocol (rev 20120528 t) [ 1.473239] can: netlink gateway (rev 20130117) max_hops=1 [ 1.479801] Key type dns_resolver registered [ 1.484607] omap_voltage_late_init: Voltage driver support not added [ 1.492407] ThumbEE CPU extension supported. [ 1.505007] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.512583] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.520652] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.528394] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.536086] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.543770] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.551058] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.558736] hctosys: unable to open rtc device (rtc0) [ 1.569539] Waiting for root device /dev/mmcblk0p2... [ 1.604742] mmc1: new high speed MMC card at address 0001 [ 1.611211] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.616289] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.622781] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.631214] mmcblk1: p1 p2 [PYBOOT] [bbb 02:08]: Timed out waiting for "<type 'str'>": [PYBOOT] [bbb 02:09]: got exception: timeout ~$off [PYBOOT] [bbb 02:10]: Done. Board bbb-arm-omap2plus_defconfig failure log: ------------------------------------------------- [ 2.050820] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.056946] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.063282] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.070166] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.079773] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.089284] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.096312] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.139545] ledtrig-cpu: registered to indicate activity on CPUs [ 2.148245] oprofile: using arm/armv7 [ 2.153410] Initializing XFRM netlink socket [ 2.158511] NET: Registered protocol family 10 [ 2.169398] sit: IPv6 over IPv4 tunneling driver [ 2.178185] NET: Registered protocol family 17 [ 2.183137] NET: Registered protocol family 15 [ 2.188388] Key type dns_resolver registered [ 2.193257] omap_voltage_late_init: Voltage driver support not added [ 2.200009] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.208487] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.218919] ThumbEE CPU extension supported. [ 2.223469] Registering SWP/SWPB emulation handler [ 2.228508] SmartReflex Class3 initialized [ 2.298103] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.305458] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.316059] mmc1: new high speed MMC card at address 0001 [ 2.328217] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.336584] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.344418] hctosys: unable to open rtc device (rtc0) [ 2.349887] sr_init: No PMIC hook to init smartreflex [ 2.355562] sr_init: platform driver register failed for SR [ 2.395963] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.403983] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.418287] mmcblk1: p1 p2 [ 2.435733] Waiting for root device /dev/mmcblk0p2... [PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>": [PYBOOT] [bbb 01:52]: got exception: timeout ~$off [PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.718079] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.725149] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.750664] rtc-ds1307 2-006f: SET TIME! [ 1.756430] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.763171] rtc-ds1307 2-006f: 64 bytes nvram [ 1.767773] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.775956] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.781731] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.789961] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.799111] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.805980] hub 1-0:1.0: USB hub found [ 1.809931] hub 1-0:1.0: 1 port detected [ 1.814319] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.820087] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.828192] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.837192] hub 2-0:1.0: USB hub found [ 1.841160] hub 2-0:1.0: 1 port detected [ 1.847188] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.881273] vdd_3v3: supplied by regen1 [ 1.917904] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.935467] aic_dvdd_fixed: disabling [ 1.940237] Waiting for root device /dev/mmcblk0p1... [ 1.962195] mmc1: new high speed MMC card at address 0001 [ 1.968160] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.973048] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.979392] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.986258] mmcblk1: p1 [ 2.120138] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.155166] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.180333] hub 2-1:1.0: USB hub found [ 2.184302] hub 2-1:1.0: 4 ports detected [ 2.276318] hub 1-1:1.0: USB hub found [ 2.280299] hub 1-1:1.0: 4 ports detected [PYBOOT] [beagleboard-x15 01:45]: Timed out waiting for "<type 'str'>": [PYBOOT] [beagleboard-x15 01:46]: got exception: timeout ~$off [PYBOOT] [beagleboard-x15 01:47]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.712462] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.719527] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.745492] rtc-ds1307 2-006f: SET TIME! [ 1.751243] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.757982] rtc-ds1307 2-006f: 64 bytes nvram [ 1.762585] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.770763] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.776540] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.784766] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.793922] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.800803] hub 1-0:1.0: USB hub found [ 1.804754] hub 1-0:1.0: 1 port detected [ 1.809137] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.814905] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.822995] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.831984] hub 2-0:1.0: USB hub found [ 1.835943] hub 2-0:1.0: 1 port detected [ 1.841947] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.876082] vdd_3v3: supplied by regen1 [ 1.915018] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.931930] aic_dvdd_fixed: disabling [ 1.936546] Waiting for root device /dev/mmcblk0p1... [ 1.967048] mmc1: new high speed MMC card at address 0001 [ 1.973015] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.977903] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.984241] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.991114] mmcblk1: p1 [ 2.114979] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.150007] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.175144] hub 2-1:1.0: USB hub found [ 2.179110] hub 2-1:1.0: 4 ports detected [ 2.271134] hub 1-1:1.0: USB hub found [ 2.275112] hub 1-1:1.0: 4 ports detected [PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>": [PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off [PYBOOT] [beagleboard-x15 01:43]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- [ 1.594974] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.602013] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.627394] rtc-ds1307 2-006f: SET TIME! [ 1.633015] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.639723] rtc-ds1307 2-006f: 64 bytes nvram [ 1.644307] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.651673] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.657441] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.665654] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.674785] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.681502] hub 1-0:1.0: USB hub found [ 1.685453] hub 1-0:1.0: 1 port detected [ 1.689768] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.695528] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.703601] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.712469] hub 2-0:1.0: USB hub found [ 1.716399] hub 2-0:1.0: 1 port detected [ 1.721645] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.757616] vdd_3v3: supplied by regen1 [ 1.788718] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.801689] aic_dvdd_fixed: disabling [ 1.807069] Waiting for root device /dev/mmcblk0p1... [ 1.853942] mmc1: new high speed MMC card at address 0001 [ 1.859811] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.864640] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.870938] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.877725] mmcblk1: p1 [ 1.996933] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.026953] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.055701] hub 2-1:1.0: USB hub found [ 2.059681] hub 2-1:1.0: 4 ports detected [ 2.151704] hub 1-1:1.0: USB hub found [ 2.155676] hub 1-1:1.0: 4 ports detected [PYBOOT] [beagleboard-x15 01:52]: Timed out waiting for "<type 'str'>": [PYBOOT] [beagleboard-x15 01:53]: got exception: timeout ~$off [PYBOOT] [beagleboard-x15 01:54]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: ------------------------------------------------- [ 2.204819] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.211696] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.222086] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.226948] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.233262] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.240111] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.249708] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.259207] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.266260] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.313623] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.319924] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.326796] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.336386] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.345883] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.352921] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.359036] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.365343] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.372192] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.381778] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.391280] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.398325] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.405004] vdd_3v3: supplied by regen1 [ 2.443659] hctosys: unable to open rtc device (rtc0) [ 2.448961] sr_init: No PMIC hook to init smartreflex [ 2.454465] sr_init: platform driver register failed for SR [ 2.495286] mmc1: new high speed MMC card at address 0001 [ 2.501924] aic_dvdd_fixed: disabling [ 2.503233] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.504009] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.504633] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.514372] mmcblk1: p1 [ 2.525975] ldousb: disabling [ 2.531958] Waiting for root device /dev/mmcblk0p1... [PYBOOT] [beagleboard-x15 01:42]: Timed out waiting for "<type 'str'>": [PYBOOT] [beagleboard-x15 01:43]: got exception: timeout ~$off [PYBOOT] [beagleboard-x15 01:44]: Done. Board beaver-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.153442] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.159025] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.166120] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.176120] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.185533] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.191041] vdd_1v8_gen: supplied by vdd_5v_in [ 3.198041] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.204661] [drm] No driver support for vblank timestamp query. [ 3.210604] drm drm: No connectors reported connected with modes [ 3.216610] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.242798] Console: switching to colour frame buffer device 128x48 [ 3.255359] drm drm: fb0: frame buffer device [ 3.273381] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.282009] usb3_vbus: supplied by vdd_5v_in [ 3.288420] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.294878] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.300287] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.308124] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.323392] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.330247] hub 1-0:1.0: USB hub found [ 3.334020] hub 1-0:1.0: 1 port detected [ 3.338919] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.344330] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.352066] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.363387] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.370141] hub 2-0:1.0: USB hub found [ 3.373909] hub 2-0:1.0: 1 port detected [ 3.384921] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.398680] vdd_sata,avdd_plle: disabling [ 3.403468] usb1_vbus: disabling [ 3.407554] Waiting for root device /dev/mmcblk0p1... [ 3.683392] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.621920] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [PYBOOT] [beaver 01:48]: Timed out waiting for "<type 'str'>": [PYBOOT] [beaver 01:49]: got exception: timeout ~$off [PYBOOT] [beaver 01:51]: Done. Board beaver-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- [ 3.122732] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.128315] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.134931] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.144924] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.154087] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.159560] vdd_1v8_gen: supplied by vdd_5v_in [ 3.165218] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.171830] [drm] No driver support for vblank timestamp query. [ 3.177759] drm drm: No connectors reported connected with modes [ 3.183761] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.203104] Console: switching to colour frame buffer device 128x48 [ 3.214900] drm drm: fb0: frame buffer device [ 3.219336] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.227246] usb3_vbus: supplied by vdd_5v_in [ 3.233491] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.239939] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.245344] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.253061] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.267816] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.274186] hub 1-0:1.0: USB hub found [ 3.277952] hub 1-0:1.0: 1 port detected [ 3.282591] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.287998] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.295657] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.307812] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.314085] hub 2-0:1.0: USB hub found [ 3.317844] hub 2-0:1.0: 1 port detected [ 3.325354] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.338435] vdd_sata,avdd_plle: disabling [ 3.342828] usb1_vbus: disabling [ 3.346756] Waiting for root device /dev/mmcblk0p1... [ 3.627818] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.566367] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [PYBOOT] [beaver 01:53]: Timed out waiting for "<type 'str'>": [PYBOOT] [beaver 01:54]: got exception: timeout ~$off [PYBOOT] [beaver 01:55]: Done. Board beaver-arm-tegra_defconfig failure log: ------------------------------------------------- [ 3.434016] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.444020] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.452906] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.458426] vdd_1v8_gen: supplied by vdd_5v_in [ 3.466931] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.473549] [drm] No driver support for vblank timestamp query. [ 3.479553] drm drm: No connectors reported connected with modes [ 3.485567] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.511506] Console: switching to colour frame buffer device 128x48 [ 3.523327] drm drm: fb0: frame buffer device [ 3.550504] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.558018] usb3_vbus: supplied by vdd_5v_in [ 3.564144] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.570614] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.576036] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.584016] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.600512] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.608227] hub 1-0:1.0: USB hub found [ 3.612008] hub 1-0:1.0: 1 port detected [ 3.616813] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.622240] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.630113] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.650506] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.658096] hub 2-0:1.0: USB hub found [ 3.661871] hub 2-0:1.0: 1 port detected [ 3.670190] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.688956] vdd_sata,avdd_plle: disabling [ 3.693488] usb1_vbus: disabling [ 3.696913] ALSA device list: [ 3.699871] #0: NVIDIA Tegra Beaver [ 3.704116] Waiting for root device /dev/mmcblk0p1... [ 3.980509] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.965907] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [PYBOOT] [beaver 01:42]: Timed out waiting for "<type 'str'>": [PYBOOT] [beaver 01:43]: got exception: timeout ~$off [PYBOOT] [beaver 01:44]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- [....] Synthesizing the initial hotplug events...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 42.070440] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 42.084762] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 85.585262] random: dd urandom read with 58 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ [ 90.002663] eth0: device MAC address 6e:2b:8c:3f:a5:cf [ 90.159577] RX IPC Checksum Offload disabled [ 90.164202] No MAC Management Counters available [ 90.169973] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/6e:2b:8c:3f:a5:cf Sending on LPF/eth0/6e:2b:8c:3f:a5:cf Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 16 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 [PYBOOT] [colombus 03:17]: Timed out waiting for "<type 'str'>": [PYBOOT] [colombus 03:18]: got exception: timeout ~$off [PYBOOT] [colombus 03:19]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: ------------------------------------------------- [ 14.493592] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.567834] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.578162] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.652357] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.662690] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.736944] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.747277] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.821467] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.831796] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.906057] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.916412] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.990714] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 39.001043] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.075312] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.085635] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.159879] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.170202] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.244454] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.254798] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.329145] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.339466] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.413718] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.424048] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.498287] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.508608] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.582801] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.593128] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.667380] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.677709] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.751907] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.762237] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.836482] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.846807] blk_update_request: I/O error, dev mmcblk0, sector 3633201 [PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>": [PYBOOT] [cosmic 01:59]: got exception: timeout ~$off [PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 14.082663] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.156648] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.166723] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.240701] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.250783] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.324761] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.334843] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.408823] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.418903] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.492891] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.502972] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.576957] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.587027] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.661010] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.671077] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.745055] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.755129] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.829117] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.839189] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.913170] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.923240] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.997226] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.007301] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.081281] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.091360] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.165338] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.175412] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.249394] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.259471] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.333454] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.343532] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.417517] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.427601] blk_update_request: I/O error, dev mmcblk0, sector 3633201 [PYBOOT] [cosmic 02:20]: Timed out waiting for "<type 'str'>": [PYBOOT] [cosmic 02:21]: got exception: timeout ~$off [PYBOOT] [cosmic 02:22]: Done. Board cosmic-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- [ 13.877589] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 17.951507] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 17.961562] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.035480] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.045534] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.119454] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.129508] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.203424] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.213481] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.287404] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.297466] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.371390] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.381455] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.455386] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.465454] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.539373] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.549422] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.623336] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.633386] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.707299] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.717351] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.791262] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.801315] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 62.875236] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 62.885290] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 66.959211] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 66.969271] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.043187] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.053244] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.127167] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.137224] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.211141] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.221200] blk_update_request: I/O error, dev mmcblk0, sector 3633201 [PYBOOT] [cosmic 02:12]: Timed out waiting for "<type 'str'>": [PYBOOT] [cosmic 02:13]: got exception: timeout ~$off [PYBOOT] [cosmic 02:14]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.490732] Key type dns_resolver registered [ 2.497121] ThumbEE CPU extension supported. [ 2.501539] Registering SWP/SWPB emulation handler [ 2.548245] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.554534] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.563023] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.579488] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.586351] [drm] No driver support for vblank timestamp query. [ 2.605043] mmc1: new high speed MMC card at address 0001 [ 2.615266] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.622338] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.629392] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.637871] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.648738] mmcblk1: p1 [ 2.768291] Console: switching to colour frame buffer device 240x75 [ 2.855642] drm drm: fb0: frame buffer device [ 2.875269] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.885354] usb2_vbus: supplied by vdd-sys-5v0 [ 2.896006] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.901610] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.910542] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.925288] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.935735] hub 1-0:1.0: USB hub found [ 2.939812] hub 1-0:1.0: 1 port detected [ 2.949709] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.963708] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.025686] dvdd_ts: disabling [ 3.028788] usb1_vbus: disabling [ 3.032142] vdd_cam_1v8_reg: disabling [ 3.039588] Waiting for root device /dev/mmcblk0p1... [ 3.250281] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.206962] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 63.800307] random: nonblocking pool is initialized [PYBOOT] [dalmore 02:11]: Timed out waiting for "<type 'str'>": [PYBOOT] [dalmore 02:12]: got exception: timeout ~$off [PYBOOT] [dalmore 02:14]: Done. Board dalmore-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.491952] Key type dns_resolver registered [ 2.498345] ThumbEE CPU extension supported. [ 2.502765] Registering SWP/SWPB emulation handler [ 2.534566] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.541640] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.551090] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.567406] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.574174] [drm] No driver support for vblank timestamp query. [ 2.595055] mmc1: new high speed MMC card at address 0001 [ 2.603971] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.610606] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.619137] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.626255] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.637768] mmcblk1: p1 [ 2.755369] Console: switching to colour frame buffer device 240x75 [ 2.843171] drm drm: fb0: frame buffer device [ 2.859097] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.869134] usb2_vbus: supplied by vdd-sys-5v0 [ 2.880679] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.886275] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.895114] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.909114] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.919609] hub 1-0:1.0: USB hub found [ 2.923630] hub 1-0:1.0: 1 port detected [ 2.933677] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.947562] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.008915] dvdd_ts: disabling [ 3.012025] usb1_vbus: disabling [ 3.015411] vdd_cam_1v8_reg: disabling [ 3.022870] Waiting for root device /dev/mmcblk0p1... [ 3.234156] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.212483] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 49.894992] random: nonblocking pool is initialized [PYBOOT] [dalmore 01:56]: Timed out waiting for "<type 'str'>": [PYBOOT] [dalmore 01:57]: got exception: timeout ~$off [PYBOOT] [dalmore 01:58]: Done. Board dalmore-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- [ 2.042168] can: broadcast manager protocol (rev 20120528 t) [ 2.047924] can: netlink gateway (rev 20130117) max_hops=1 [ 2.054597] Key type dns_resolver registered [ 2.059713] ThumbEE CPU extension supported. [ 2.090681] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.095619] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.105701] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.127870] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.134555] [drm] No driver support for vblank timestamp query. [ 2.298109] Console: switching to colour frame buffer device 240x75 [ 2.386085] drm drm: fb0: frame buffer device [ 2.390810] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.398937] usb2_vbus: supplied by vdd-sys-5v0 [ 2.407941] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.413504] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.421412] mmc1: new high speed MMC card at address 0001 [ 2.428058] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.433083] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.439806] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.445890] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.452290] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.459052] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.466236] mmcblk1: p1 [ 2.471192] hub 1-0:1.0: USB hub found [ 2.478188] hub 1-0:1.0: 1 port detected [ 2.487903] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.499280] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.540228] dvdd_ts: disabling [ 2.543317] usb1_vbus: disabling [ 2.546615] vdd_cam_1v8_reg: disabling [ 2.552084] Waiting for root device /dev/mmcblk0p1... [ 2.790375] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.742658] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [PYBOOT] [dalmore 01:49]: Timed out waiting for "<type 'str'>": [PYBOOT] [dalmore 01:50]: got exception: timeout ~$off [PYBOOT] [dalmore 01:51]: Done. Board dalmore-arm-tegra_defconfig failure log: ------------------------------------------------- [ 2.668086] Bluetooth: RFCOMM ver 1.11 [ 2.672021] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.677420] Bluetooth: BNEP socket layer initialized [ 2.682506] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.688509] Bluetooth: HIDP socket layer initialized [ 2.695464] Key type dns_resolver registered [ 2.705051] Registering SWP/SWPB emulation handler [ 2.735014] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.740150] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.749099] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.772769] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.779423] [drm] No driver support for vblank timestamp query. [ 2.955941] Console: switching to colour frame buffer device 240x75 [ 3.042401] drm drm: fb0: frame buffer device [ 3.070871] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.078157] usb2_vbus: supplied by vdd-sys-5v0 [ 3.086522] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.092382] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.101511] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.120877] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.134949] hub 1-0:1.0: USB hub found [ 3.138909] hub 1-0:1.0: 1 port detected [ 3.152964] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.169060] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.264389] dvdd_ts: disabling [ 3.267494] usb1_vbus: disabling [ 3.270885] vdd_cam_1v8_reg: disabling [ 3.275661] ALSA device list: [ 3.278665] #0: NVIDIA Tegra Dalmore [ 3.284638] Waiting for root device /dev/mmcblk0p1... [ 3.460863] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.485260] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 61.820832] random: nonblocking pool is initialized [PYBOOT] [dalmore 01:45]: Timed out waiting for "<type 'str'>": [PYBOOT] [dalmore 01:46]: got exception: timeout ~$off [PYBOOT] [dalmore 01:48]: Done. Board odroidu3-arm-exynos_defconfig failure log: ------------------------------------------------- [ 1.699232] usbcore: registered new interface driver usbhid [ 1.704384] usbhid: USB HID core driver [ 1.713254] NET: Registered protocol family 10 [ 1.713865] sit: IPv6 over IPv4 tunneling driver [ 1.717109] NET: Registered protocol family 17 [ 1.721223] NET: Registered protocol family 15 [ 1.725575] Key type dns_resolver registered [ 1.729904] Registering SWP/SWPB emulation handler [ 1.738806] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.740277] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.768514] max98090 1-0010: MAX98090 REVID=0x43 [ 1.770817] max98090 1-0010: use default 2.8v micbias [ 1.778071] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.780853] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.786700] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.795556] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.805086] usb 1-3: New USB device found, idVendor=0424, idProduct=3503 [ 1.811582] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.819086] mmc1: new DDR MMC card at address 0001 [ 1.823594] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.824382] hub 1-3:1.0: USB hub found [ 1.824557] hub 1-3:1.0: 3 ports detected [ 1.824586] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.824969] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.825460] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.825850] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.827003] mmcblk1: p1 p2 [ 1.881402] VDD10_HDMI_1.0V: disabling [ 1.882098] vdd_g3d: disabling [ 1.883178] BUCK8_2.8V: disabling [ 1.88n141] ALSA device list: [ 1.888817] #0: Odroid-U3 [ 1.892495] Waiting for root device /dev/mmcblk0p2... [PYBOOT] [odroidu3 01:49]: Timed out waiting for "<type 'str'>": [PYBOOT] [odroidu3 01:50]: got exception: timeout ~$off [PYBOOT] [odroidu3 01:51]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.054592] Code: 00000000 00000000 00000000 00000000 (00000000) [ 2.054597] ---[ end trace 3c39b1ea06f33174 ]--- [ 2.054600] Kernel panic - not syncing: Attempted to kill the idle task! [ 2.058147] CPU1: stopping [ 2.058151] CPU: 1 PID: 6 Comm: kworker/u4:0 Tainted: G D 4.6.0-rc5-00071-g9453203 #1 [ 2.058152] Hardware name: Generic OMAP5 (Flattened Device Tree) [ 2.058160] Workqueue: deferwq deferred_probe_work_func [ 2.058170] [<c0310434>] (unwind_backtrace) from [<c030badc>] (show_stack+0x10/0x14) [ 2.058178] [<c030badc>] (show_stack) from [<c058b4c0>] (dump_stack+0x98/0xac) [ 2.058185] [<c058b4c0>] (dump_stack) from [<c030ebc4>] (handle_IPI+0x16c/0x18c) [ 2.058190] [<c030ebc4>] (handle_IPI) from [<c03017ac>] (gic_handle_irq+0x90/0x94) [ 2.058194] [<c03017ac>] (gic_handle_irq) from [<c030c654>] (__irq_svc+0x54/0x70) [ 2.058196] Exception stack(0xee087cc8 to 0xee087d10) [ 2.058200] 7cc0: 00000000 0000000d 00000001 60000013 00000000 c1418914 [ 2.058204] 7ce0: 00000004 00000061 000000e7 00000000 00000000 000000e6 00000000 ee087d18 [ 2.058207] 7d00: c06dcb90 c0383448 60000013 ffffffff [ 2.058212] [<c030c654>] (__irq_svc) from [<c0383448>] (console_unlock+0x3ec/0x638) [ 2.058216] [<c0383448>] (console_unlock) from [<c038390c>] (vprintk_emit+0x278/0x4d0) [ 2.058220] [<c038390c>] (vprintk_emit) from [<c0383cc0>] (vprintk_default+0x24/0x2c) [ 2.058225] [<c0383cc0>] (vprintk_default) from [<c03c7b5c>] (printk+0x30/0x40) [ 2.058232] [<c03c7b5c>] (printk) from [<c09932d0>] (cpufreq_online+0x660/0x6f0) [ 2.058237] [<c09932d0>] (cpufreq_online) from [<c0777a74>] (subsys_interface_register+0x94/0xd8) [ 2.058243] [<c0777a74>] (subsys_interface_register) from [<c0991d58>] (cpufreq_register_driver+0x12c/0x198) [ 2.058248] [<c0991d58>] (cpufreq_register_driver) from [<c09957dc>] (dt_cpufreq_probe+0x70/0xec) [ 2.058254] [<c09957dc>] (dt_cpufreq_probe) from [<c077ac20>] (platform_drv_probe+0x4c/0xb0) [ 2.058259] [<c077ac20>] (platform_drv_probe) from [<c0779348>] (driver_probe_device+0x214/0x2c0) [ 2.058263] [<c0779348>] (driver_probe_device) from [<c0777750>] (bus_for_each_drv+0x64/0x98) [ 2.058268] [<c0777750>] (bus_for_each_drv) from [<c0779058>] (__device_attach+0xb0/0x110) [ 2.058272] [<c0779058>] (__device_attach) from [<c0778694>] (bus_probe_device+0x84/0x8c) [ 2.058277] [<c0778694>] (bus_probe_device) from [<c0778b24>] (deferred_probe_work_func+0x68/0x98) [ 2.058282] [<c0778b24>] (deferred_probe_work_func) from [<c0357880>] (process_one_work+0x138/0x348) [ 2.058287] [<c0357880>] (process_one_work) from [<c0357ac8>] (worker_thread+0x38/0x510) [ 2.058292] [<c0357ac8>] (worker_thread) from [<c035cd70>] (kthread+0xdc/0xf4) [ 2.058298] [<c035cd70>] (kthread) from [<c0307eb8>] (ret_from_fork+0x14/0x3c) [ 2.471799] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! [PYBOOT] [omap5uevm 00:49]: got exception: panic ~$off [PYBOOT] [omap5uevm 00:50]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.056140] Code: e1a00004 e8bd8038 e92d4010 e5912004 (e5923000) [ 2.056146] ---[ end trace a70909e208adc2f7 ]--- [ 2.056149] Kernel panic - not syncing: Fatal exception in interrupt [ 2.063103] CPU1: stopping [ 2.063106] CPU: 1 PID: 72 Comm: kworker/u4:1 Tainted: G D 4.6.0-rc5-00071-g9453203 #1 [ 2.063107] Hardware name: Generic OMAP5 (Flattened Device Tree) [ 2.063115] Workqueue: deferwq deferred_probe_work_func [ 2.063124] [<c0310434>] (unwind_backtrace) from [<c030badc>] (show_stack+0x10/0x14) [ 2.063134] [<c030badc>] (show_stack) from [<c058b4c0>] (dump_stack+0x98/0xac) [ 2.063140] [<c058b4c0>] (dump_stack) from [<c030ebc4>] (handle_IPI+0x16c/0x18c) [ 2.063145] [<c030ebc4>] (handle_IPI) from [<c03017ac>] (gic_handle_irq+0x90/0x94) [ 2.063149] [<c03017ac>] (gic_handle_irq) from [<c030c654>] (__irq_svc+0x54/0x70) [ 2.063151] Exception stack(0xee60bcc8 to 0xee60bd10) [ 2.063155] bcc0: 00000000 0000000d 00000001 60000013 00000000 c1418914 [ 2.063159] bce0: 00000004 00000061 000000e7 00000000 00000000 000000e6 00000000 ee60bd18 [ 2.063161] bd00: c06dcb90 c0383448 60000013 ffffffff [ 2.063166] [<c030c654>] (__irq_svc) from [<c0383448>] (console_unlock+0x3ec/0x638) [ 2.063170] [<c0383448>] (console_unlock) from [<c038390c>] (vprintk_emit+0x278/0x4d0) [ 2.063174] [<c038390c>] (vprintk_emit) from [<c0383cc0>] (vprintk_default+0x24/0x2c) [ 2.063179] [<c0383cc0>] (vprintk_default) from [<c03c7b5c>] (printk+0x30/0x40) [ 2.063185] [<c03c7b5c>] (printk) from [<c09932d0>] (cpufreq_online+0x660/0x6f0) [ 2.063189] [<c09932d0>] (cpufreq_online) from [<c0777a74>] (subsys_interface_register+0x94/0xd8) [ 2.063194] [<c0777a74>] (subsys_interface_register) from [<c0991d58>] (cpufreq_register_driver+0x12c/0x198) [ 2.063200] [<c0991d58>] (cpufreq_register_driver) from [<c09957dc>] (dt_cpufreq_probe+0x70/0xec) [ 2.063208] [<c09957dc>] (dt_cpufreq_probe) from [<c077ac20>] (platform_drv_probe+0x4c/0xb0) [ 2.063213] [<c077ac20>] (platform_drv_probe) from [<c0779348>] (driver_probe_device+0x214/0x2c0) [ 2.063217] [<c0779348>] (driver_probe_device) from [<c0777750>] (bus_for_each_drv+0x64/0x98) [ 2.063222] [<c0777750>] (bus_for_each_drv) from [<c0779058>] (__device_attach+0xb0/0x110) [ 2.063226] [<c0779058>] (__device_attach) from [<c0778694>] (bus_probe_device+0x84/0x8c) [ 2.063231] [<c0778694>] (bus_probe_device) from [<c0778b24>] (deferred_probe_work_func+0x68/0x98) [ 2.063237] [<c0778b24>] (deferred_probe_work_func) from [<c0357880>] (process_one_work+0x138/0x348) [ 2.063242] [<c0357880>] (process_one_work) from [<c0357ac8>] (worker_thread+0x38/0x510) [ 2.063247] [<c0357ac8>] (worker_thread) from [<c035cd70>] (kthread+0xdc/0xf4) [ 2.063252] [<c035cd70>] (kthread) from [<c0307eb8>] (ret_from_fork+0x14/0x3c) [ 2.684384] ---[ end Kernel panic - not syncing: Fatal exception in interrupt [PYBOOT] [omap5uevm 00:46]: got exception: panic ~$off [PYBOOT] [omap5uevm 00:47]: Done. Board omap5uevm-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- [ 1.657123] ledtrig-cpu: registered to indicate activity on CPUs [ 1.663522] usbcore: registered new interface driver usbhid [ 1.669352] usbhid: USB HID core driver [ 1.675985] NET: Registered protocol family 10 [ 1.681208] sit: IPv6 over IPv4 tunneling driver [ 1.686378] NET: Registered protocol family 17 [ 1.691035] can: controller area network core (rev 20120528 abi 9) [ 1.697527] NET: Registered protocol family 29 [ 1.702175] can: raw protocol (rev 20120528) [ 1.706646] can: broadcast manager protocol (rev 20120528 t) [ 1.712575] can: netlink gateway (rev 20130117) max_hops=1 [ 1.718528] Key type dns_resolver registered [ 1.723079] omap_vc_init_channel: No PMIC info for vdd_core [ 1.728907] omap_vp_init: No PMIC info for vdd_core [ 1.734000] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.739647] omap_vp_init: No PMIC info for vdd_mm [ 1.744562] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.750301] omap_vp_init: No PMIC info for vdd_mpu [ 1.755585] Power Management for TI OMAP4+ devices. [ 1.760785] ThumbEE CPU extension supported. [ 1.765347] usb 1-3: new high-speed USB device number 2 using ehci-omap [ 1.776851] palmas 0-0048: Irq flag is 0x00000000 [ 1.799753] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 1.809121] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.833548] mmc0: new high speed MMC card at address 0001 [ 1.839406] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.844271] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.850579] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.865635] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.888120] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 1.905203] smsc95xx v1.0.4 [ 1.923560] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 1.931485] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz [PYBOOT] [omap5uevm 02:08]: Timed out waiting for "<type 'str'>": [PYBOOT] [omap5uevm 02:09]: got exception: timeout ~$off [PYBOOT] [omap5uevm 02:10]: Done. Board seaboard-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.656643] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.671115] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.677629] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.683080] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.691028] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.733333] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.733895] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.735096] hub 3-0:1.0: USB hub found [ 1.735160] hub 3-0:1.0: 1 port detected [ 1.754621] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.760981] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.763971] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.771675] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.777847] [drm] No driver support for vblank timestamp query. [ 1.792108] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.798833] mmc2: switch to bus width 8 failed [ 1.803778] mmc0: new SDIO card at address 0001 [ 1.825014] mmc2: switch to bus width 4 failed [ 1.825034] mmc2: new high speed MMC card at address 0001 [ 1.825757] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.826058] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.826343] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.827869] mmcblk2: p3 [ 1.890749] Console: switching to colour frame buffer device 170x48 [ 1.948062] drm drm: fb0: frame buffer device [ 1.964467] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.971100] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.978095] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.991548] vdd_1v5: disabling [ 1.994625] vdd_1v2: disabling [ 2.587308] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.598711] Waiting for root device /dev/mmcblk0p3... [ 58.616430] random: nonblocking pool is initialized [PYBOOT] [seaboard 01:55]: Timed out waiting for "<type 'str'>": [PYBOOT] [seaboard 01:56]: got exception: timeout ~$off [PYBOOT] [seaboard 01:57]: Done. Board seaboard-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- [ 1.612107] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.618436] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.628361] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.634809] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.640221] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.647975] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.663161] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.669631] hub 3-0:1.0: USB hub found [ 1.673438] hub 3-0:1.0: 1 port detected [ 1.683847] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.690476] [drm] No driver support for vblank timestamp query. [ 1.721438] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.727566] mmc2: switch to bus width 8 failed [ 1.727790] mmc2: switch to bus width 4 failed [ 1.727799] mmc2: new high speed MMC card at address 0001 [ 1.728119] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.728247] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.728384] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.729346] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.729492] mmcblk2: p3 [ 1.732439] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.739430] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.760338] Console: switching to colour frame buffer device 170x48 [ 1.833445] drm drm: fb0: frame buffer device [ 1.837911] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.844326] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.851199] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.862832] vdd_1v5: disabling [ 1.865911] vdd_1v2: disabling [ 1.872718] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.881218] mmc0: new SDIO card at address 0001 [ 2.521724] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.532571] Waiting for root device /dev/mmcblk0p3... [PYBOOT] [seaboard 01:51]: Timed out waiting for "<type 'str'>": [PYBOOT] [seaboard 01:52]: got exception: timeout ~$off [PYBOOT] [seaboard 01:53]: Done. Board seaboard-arm-tegra_defconfig failure log: ------------------------------------------------- [ 1.648485] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.654497] Bluetooth: HIDP socket layer initialized [ 1.660227] Key type dns_resolver registered [ 1.665959] Registering SWP/SWPB emulation handler [ 1.682436] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.689348] VDDIO_HDMI: supplied by vdd_5v0 [ 1.693981] vdd_sys: supplied by vdd_5v0 [ 1.698051] vdd_sm2,vin_ldo*: supplied by vdd_sys [ 1.703190] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.709927] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.718378] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.726447] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.729108] mmc0: new SDIO card at address 0001 [ 1.737523] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.742965] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.750888] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.770063] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.777930] hub 3-0:1.0: USB hub found [ 1.781737] hub 3-0:1.0: 1 port detected [ 1.791987] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.798595] [drm] No driver support for vblank timestamp query. [ 1.886215] Console: switching to colour frame buffer device 170x48 [ 1.903767] drm drm: fb0: frame buffer device [ 1.930050] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.937032] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 1.944511] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.962362] vdd_1v5: disabling [ 1.965419] vdd_1v2: disabling [ 1.968576] ALSA device list: [ 1.971569] #0: NVIDIA Tegra Seaboard [ 2.270996] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.282218] Waiting for root device /dev/mmcblk0p3... [ 75.782758] random: nonblocking pool is initialized [PYBOOT] [seaboard 01:47]: Timed out waiting for "<type 'str'>": [PYBOOT] [seaboard 01:48]: got exception: timeout ~$off [PYBOOT] [seaboard 01:50]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- [....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 3.192079] EXT4-fs (mmcblk0p3): warning: mounting fs with errors, running e2fsck is recommended [ 3.200436] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 4.248139] random: dd urandom read with 76 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Cannot find device "eth0" Bind socket to interface: No such device Failed to bring up eth0. [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. INIT: Entering runlevel: 2 [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting web server: apache2apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting periodic command scheduler: cron[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Loading cpufreq kernel modules...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone (none). [....] Starting system message bus: dbus[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] CPUFreq Utilities: Setting ondemand CPUFreq governor...CPU0...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Starting OpenBSD Secure Shell server: sshd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [PYBOOT] [snow 03:10]: Timed out waiting for "<type 'str'>": [PYBOOT] [snow 03:11]: got exception: timeout ~$off [PYBOOT] [snow 03:12]: Done. Board snowball-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.958892] can: controller area network core (rev 20120528 abi 9) [ 1.965148] NET: Registered protocol family 29 [ 1.969604] can: raw protocol (rev 20120528) [ 1.973876] can: broadcast manager protocol (rev 20120528 t) [ 1.979553] can: netlink gateway (rev 20130117) max_hops=1 [ 1.985565] Key type dns_resolver registered [ 1.990081] ThumbEE CPU extension supported. [ 1.994384] Registering SWP/SWPB emulation handler [ 2.005218] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.012084] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.021301] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.028320] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.035308] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.042297] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.056274] db8500-esram12: disabling [ 2.060058] db8500-esram34: disabling [ 2.064086] V-CSI/DSI: disabling [ 2.067382] mmci-reg: disabling [ 2.071136] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.077117] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.083557] Waiting for root device /dev/mmcblk0p4... [ 2.123718] mmc3: new high speed MMC card at address 0001 [ 2.129699] mmcblk3: mmc3:0001 3.53 GiB [ 2.134002] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.139648] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.145294] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.151763] mmcblk3: p1 p2 p3 p4 Connected. cu: Got hangup signal cu: waitpid: No child processes Connected. Disconnected. [PYBOOT] [snowball 02:07]: Timed out waiting for "<type 'str'>": [PYBOOT] [snowball 02:08]: got exception: timeout ~$off [PYBOOT] [snowball 02:10]: Done. Board snowball-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- [ 1.902984] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.910522] ledtrig-cpu: registered to indicate activity on CPUs [ 1.916748] usbcore: registered new interface driver usbhid [ 1.922332] usbhid: USB HID core driver [ 1.929595] NET: Registered protocol family 10 [ 1.984954] sit: IPv6 over IPv4 tunneling driver [ 1.990112] NET: Registered protocol family 17 [ 1.994598] can: controller area network core (rev 20120528 abi 9) [ 2.000823] NET: Registered protocol family 29 [ 2.005279] can: raw protocol (rev 20120528) [ 2.009552] can: broadcast manager protocol (rev 20120528 t) [ 2.015197] can: netlink gateway (rev 20130117) max_hops=1 [ 2.021148] Key type dns_resolver registered [ 2.025604] ThumbEE CPU extension supported. [ 2.079956] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.094635] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.103759] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.110748] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.117736] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.124694] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.136444] db8500-esram12: disabling [ 2.184234] db8500-esram34: disabling [ 2.204956] V-CSI/DSI: disabling [ 2.214202] mmci-reg: disabling [ 2.217803] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.223754] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.243927] Waiting for root device /dev/mmcblk0p4... [ 3.047790] mmc3: new high speed MMC card at address 0001 [ 3.059600] mmcblk3: mmc3:0001 3.53 GiB [ 3.069732] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 3.079254] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 3.093780] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 3.100585] mmcblk3: p1 p2 p3 p4 [PYBOOT] [snowball 02:04]: Timed out waiting for "<type 'str'>": [PYBOOT] [snowball 02:05]: got exception: timeout ~$off [PYBOOT] [snowball 02:06]: Done. Board snowball-arm-u8500_defconfig failure log: ------------------------------------------------- [ 2.666442] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.677459] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.693206] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.704071] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.741363] NET: Registered protocol family 10 [ 2.759063] sit: IPv6 over IPv4 tunneling driver [ 2.766754] NET: Registered protocol family 17 [ 2.771942] NET: Registered protocol family 35 [ 2.776733] NET: Registered protocol family 37 [ 2.781372] Registering SWP/SWPB emulation handler [ 2.787719] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.794097] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.800720] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.807800] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-08 13:39:13 UTC (955201153) [ 2.820404] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.827362] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.834381] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.841430] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.855072] db8500-esram12: disabling [ 2.858917] db8500-esram34: disabling [ 2.862915] V-CSI/DSI: disabling [ 2.866180] mmci-reg: disabling [ 2.869476] ALSA device list: [ 2.872497] #0: MOP500-card [ 2.875823] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.881835] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.888031] Waiting for root device /dev/mmcblk0p4... cu: Got hangup signal Connected. cu: waitpid: No child processes Connected. Disconnected. [PYBOOT] [snowball 01:53]: Timed out waiting for "<type 'str'>": [PYBOOT] [snowball 01:54]: got exception: timeout ~$off [PYBOOT] [snowball 01:55]: Done. Board wandboard-arm-imx_v6_v7_defconfig failure log: ------------------------------------------------- "/sbin/getty" cannot execute "[ 20.147993] mmcblk0: error -110 sending status command, retrying /sbin/getty" INIT: Id "3" resp[ 20.156896] mmcblk0: error -110 sending status command, aborting awning too fast: disabled for 5 minutes INIT: cannot execute "[ 20.168509] mmcblk0: error -110 sending status command, retrying /sbin/getty" INIT: Id "S1" res[ 20.177411] mmcblk0: error -110 sending status command, retrying pawning too fast: disabled for 5 [ 20.186287] mmcblk0: error -110 sending status command, aborting minutes [ 20.197651] mmcblk0: error -110 sending status command, retrying [ 20.206084] mmcblk0: error -110 sending status command, retrying [ 20.214506] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/gett[ 20.225888] mmcblk0: error -110 sending status command, retrying y" INIT: Id "4" respawning too[ 20.234549] mmcblk0: error -110 sending status command, retrying fast: disabled for 5 minutes [ 20.243503] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" INIT: INIT: cannot execute "/sbin/getty"Id "5" respawning too fast: disabled for 5 minutes [ 20.292729] mmcblk0: error -110 sending status command, retrying [ 20.301214] mmcblk0: error -110 sending status command, retrying [ 20.309678] mmcblk0: error -110 sending status command, aborting [ 20.320751] mmcblk0: error -110 sending status command, retrying [ 20.329231] mmcblk0: error -110 sending status command, retrying [ 20.337666] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty"cannot execute "/sbin/getty" ÉId "6" respawning too fast: disabled for 5 minutes INIT: Id "1" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 50.436603] random: nonblocking pool is initialized [PYBOOT] [wandboard 02:56]: Timed out waiting for "<type 'str'>": [PYBOOT] [wandboard 02:57]: got exception: timeout ~$off [PYBOOT] [wandboard 02:58]: Done.

8 years, 8 months

tegra build: 140 builds: 3 failed, 137 passed, 3 errors, 684 warnings (tegra-for-4.7-soc-72-g33e7e7e54af3)

by kernelci.org bot

tegra build: 140 builds: 3 failed, 137 passed, 3 errors, 684 warnings (tegra-for-4.7-soc-72-g33e7e7e54af3) Full Build Summary: https://kernelci.org/build/tegra/kernel/tegra-for-4.7-soc-72-g33e7e7e54af3/ Tree: tegra Branch: local/for-next Git Describe: tegra-for-4.7-soc-72-g33e7e7e54af3 Git Commit: 33e7e7e54af3a966690ea8f2bcbb730f9808256b Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git Built: 3 unique architectures Build Failures Detected: x86: allmodconfig: FAIL allmodconfig+CONFIG_OF=n: FAIL arm: dove_defconfig: FAIL Errors and Warnings Detected: arm64: allmodconfig: 8 warnings allnoconfig: 2 warnings defconfig: 6 warnings defconfig+CONFIG_CPU_BIG_ENDIAN=y: 6 warnings defconfig+CONFIG_EXPERT=y+CONFIG_ACPI=y: 6 warnings defconfig+CONFIG_LKDTM=y: 6 warnings defconfig+CONFIG_OF_UNITTEST=y: 6 warnings defconfig+CONFIG_RANDOMIZE_BASE=y: 6 warnings tinyconfig: 3 warnings x86: allmodconfig: 1 error allmodconfig+CONFIG_OF=n: 1 error defconfig+kvm_guest: 1 warning tinyconfig: 4 warnings arm: acs5k_defconfig: 4 warnings acs5k_tiny_defconfig: 4 warnings allmodconfig: 10 warnings allnoconfig: 2 warnings am200epdkit_defconfig: 4 warnings assabet_defconfig: 4 warnings at91_dt_defconfig: 4 warnings axm55xx_defconfig: 5 warnings badge4_defconfig: 4 warnings bcm2835_defconfig: 2 warnings bcm_defconfig: 4 warnings cerfcube_defconfig: 4 warnings clps711x_defconfig: 2 warnings cm_x2xx_defconfig: 4 warnings cm_x300_defconfig: 4 warnings cns3420vb_defconfig: 4 warnings colibri_pxa270_defconfig: 4 warnings colibri_pxa300_defconfig: 4 warnings collie_defconfig: 2 warnings corgi_defconfig: 5 warnings davinci_all_defconfig: 4 warnings dove_defconfig: 1 error, 3 warnings ebsa110_defconfig: 4 warnings efm32_defconfig: 2 warnings em_x270_defconfig: 4 warnings ep93xx_defconfig: 4 warnings eseries_pxa_defconfig: 4 warnings exynos_defconfig: 4 warnings ezx_defconfig: 4 warnings footbridge_defconfig: 4 warnings h3600_defconfig: 4 warnings h5000_defconfig: 4 warnings hackkit_defconfig: 4 warnings hisi_defconfig: 2 warnings imote2_defconfig: 4 warnings imx_v4_v5_defconfig: 4 warnings imx_v6_v7_defconfig: 6 warnings integrator_defconfig: 4 warnings iop13xx_defconfig: 5 warnings iop32x_defconfig: 5 warnings iop33x_defconfig: 4 warnings ixp4xx_defconfig: 5 warnings jornada720_defconfig: 4 warnings keystone_defconfig: 4 warnings ks8695_defconfig: 4 warnings lart_defconfig: 4 warnings lpc18xx_defconfig: 2 warnings lpc32xx_defconfig: 4 warnings lpd270_defconfig: 4 warnings lubbock_defconfig: 4 warnings magician_defconfig: 4 warnings mainstone_defconfig: 4 warnings mini2440_defconfig: 6 warnings mmp2_defconfig: 4 warnings moxart_defconfig: 2 warnings multi_v5_defconfig: 4 warnings multi_v7_defconfig: 19 warnings multi_v7_defconfig+CONFIG_ARM_LPAE=y: 20 warnings multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y: 19 warnings multi_v7_defconfig+CONFIG_EFI=y: 19 warnings multi_v7_defconfig+CONFIG_EFI=y+CONFIG_ARM_LPAE=y: 20 warnings multi_v7_defconfig+CONFIG_LKDTM=y: 19 warnings multi_v7_defconfig+CONFIG_PROVE_LOCKING=y: 19 warnings multi_v7_defconfig+CONFIG_SMP=n: 19 warnings multi_v7_defconfig+CONFIG_THUMB2_KERNEL=y+CONFIG_ARM_MODULE_PLTS=y: 19 warnings mv78xx0_defconfig: 4 warnings mvebu_v5_defconfig: 4 warnings mvebu_v7_defconfig: 6 warnings mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y: 6 warnings mxs_defconfig: 4 warnings neponset_defconfig: 4 warnings netwinder_defconfig: 2 warnings netx_defconfig: 4 warnings nhk8815_defconfig: 4 warnings nuc910_defconfig: 2 warnings nuc950_defconfig: 2 warnings nuc960_defconfig: 2 warnings omap1_defconfig: 4 warnings omap2plus_defconfig: 7 warnings orion5x_defconfig: 4 warnings palmz72_defconfig: 4 warnings pcm027_defconfig: 4 warnings pleb_defconfig: 4 warnings prima2_defconfig: 4 warnings pxa168_defconfig: 4 warnings pxa255-idp_defconfig: 4 warnings pxa3xx_defconfig: 4 warnings pxa910_defconfig: 4 warnings pxa_defconfig: 6 warnings qcom_defconfig: 4 warnings raumfeld_defconfig: 4 warnings realview_defconfig: 4 warnings rpc_defconfig: 4 warnings s3c2410_defconfig: 4 warnings s3c6400_defconfig: 4 warnings s5pv210_defconfig: 4 warnings sama5_defconfig: 4 warnings shannon_defconfig: 4 warnings shmobile_defconfig: 3 warnings simpad_defconfig: 4 warnings socfpga_defconfig: 4 warnings spear13xx_defconfig: 4 warnings spear3xx_defconfig: 4 warnings spear6xx_defconfig: 4 warnings spitz_defconfig: 5 warnings stm32_defconfig: 2 warnings sunxi_defconfig: 4 warnings tct_hammer_defconfig: 4 warnings tegra_defconfig: 8 warnings tinyconfig: 4 warnings trizeps4_defconfig: 4 warnings u300_defconfig: 4 warnings u8500_defconfig: 4 warnings versatile_defconfig: 4 warnings versatile_defconfig+CONFIG_OF_UNITTEST=y: 4 warnings vexpress_defconfig: 5 warnings vf610m4_defconfig: 2 warnings viper_defconfig: 4 warnings vt8500_v6_v7_defconfig: 11 warnings xcep_defconfig: 4 warnings zeus_defconfig: 4 warnings zx_defconfig: 2 warnings Errors summary: 2 elf.c:358:32: error: 'ELF_C_READ_MMAP' undeclared (first use in this function) 1 drivers/phy/phy-core.c:848:4: error: implicit declaration of function 'of_get_next_parent' [-Werror=implicit-function-declaration] Warnings summary: 241 <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] 241 <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] 14 net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] 14 net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] 12 drivers/media/v4l2-core/v4l2-mc.c:37:69: warning: unused variable 'dtv_demod' [-Wunused-variable] 11 drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] 10 sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] 10 drivers/usb/host/xhci-tegra.c:555:6: warning: 'err' may be used uninitialized in this function [-Wuninitialized] 10 drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] 10 drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] 10 drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] 10 drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] 10 drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] 10 drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] 10 drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] 10 drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] 10 drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] 7 drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wmaybe-uninitialized] 6 arch/arm64/configs/defconfig:218:warning: override: reassigning to symbol MMC_BLOCK_MINORS 5 crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] 3 net/bridge/br_mdb.c:569:19: warning: 'pg' may be used uninitialized in this function [-Wmaybe-uninitialized] 2 drivers/tty/serial/uartlite.c:354:22: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 2 drivers/tty/serial/uartlite.c:348:21: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 2 drivers/platform/goldfish/goldfish_pipe.c:312:3: warning: 'get_user_pages8' is deprecated (declared at ../include/linux/mm.h:1294) [-Wdeprecated-declarations] 2 drivers/media/v4l2-core/v4l2-mc.c:37:55: warning: unused variable 'dtv_demod' [-Wunused-variable] 2 drivers/bus/mvebu-mbus.c:975:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'phys_addr_t' [-Wformat] 1 mm/page_alloc.c:5989:34: warning: array subscript is below array bounds [-Warray-bounds] 1 drivers/phy/phy-core.c:848:11: warning: assignment makes pointer from integer without a cast [enabled by default] 1 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c:182:1: warning: the frame size of 1064 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 crypto/wp512.c:987:1: warning: the frame size of 1112 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 .config:948:warning: override: NOHIGHMEM changes choice state 1 .config:947:warning: override: SLOB changes choice state 1 .config:945:warning: override: KERNEL_XZ changes choice state 1 .config:914:warning: override: SLOB changes choice state 1 .config:854:warning: override: SLOB changes choice state 1 .config:852:warning: override: KERNEL_XZ changes choice state ================================================================================ Detailed per-defconfig build reports: -------------------------------------------------------------------------------- acs5k_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- acs5k_tiny_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- allmodconfig (arm64) — PASS, 0 errors, 8 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] drivers/platform/goldfish/goldfish_pipe.c:312:3: warning: 'get_user_pages8' is deprecated (declared at ../include/linux/mm.h:1294) [-Wdeprecated-declarations] drivers/media/v4l2-core/v4l2-mc.c:37:55: warning: unused variable 'dtv_demod' [-Wunused-variable] drivers/tty/serial/uartlite.c:348:21: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] drivers/tty/serial/uartlite.c:354:22: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- allmodconfig (arm) — PASS, 0 errors, 10 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] crypto/wp512.c:987:1: warning: the frame size of 1112 bytes is larger than 1024 bytes [-Wframe-larger-than=] drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c:182:1: warning: the frame size of 1064 bytes is larger than 1024 bytes [-Wframe-larger-than=] drivers/media/v4l2-core/v4l2-mc.c:37:55: warning: unused variable 'dtv_demod' [-Wunused-variable] drivers/platform/goldfish/goldfish_pipe.c:312:3: warning: 'get_user_pages8' is deprecated (declared at ../include/linux/mm.h:1294) [-Wdeprecated-declarations] drivers/tty/serial/uartlite.c:348:21: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] drivers/tty/serial/uartlite.c:354:22: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- allmodconfig (x86) — FAIL, 1 error, 0 warnings, 0 section mismatches Errors: elf.c:358:32: error: 'ELF_C_READ_MMAP' undeclared (first use in this function) -------------------------------------------------------------------------------- allmodconfig+CONFIG_OF=n (x86) — FAIL, 1 error, 0 warnings, 0 section mismatches Errors: elf.c:358:32: error: 'ELF_C_READ_MMAP' undeclared (first use in this function) -------------------------------------------------------------------------------- allnoconfig (arm64) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- allnoconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- allnoconfig (x86) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- am200epdkit_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- assabet_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- at91_dt_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- axm55xx_defconfig (arm) — PASS, 0 errors, 5 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- badge4_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- bcm2835_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- bcm_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- cerfcube_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- clps711x_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- cm_x2xx_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- cm_x300_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- cns3420vb_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- colibri_pxa270_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- colibri_pxa300_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- collie_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- corgi_defconfig (arm) — PASS, 0 errors, 5 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- davinci_all_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- defconfig (arm64) — PASS, 0 errors, 6 warnings, 0 section mismatches Warnings: arch/arm64/configs/defconfig:218:warning: override: reassigning to symbol MMC_BLOCK_MINORS <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wmaybe-uninitialized] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- defconfig+CONFIG_CPU_BIG_ENDIAN=y (arm64) — PASS, 0 errors, 6 warnings, 0 section mismatches Warnings: arch/arm64/configs/defconfig:218:warning: override: reassigning to symbol MMC_BLOCK_MINORS <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wmaybe-uninitialized] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- defconfig+CONFIG_EXPERT=y+CONFIG_ACPI=y (arm64) — PASS, 0 errors, 6 warnings, 0 section mismatches Warnings: arch/arm64/configs/defconfig:218:warning: override: reassigning to symbol MMC_BLOCK_MINORS <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wmaybe-uninitialized] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- defconfig+CONFIG_LKDTM=y (arm64) — PASS, 0 errors, 6 warnings, 0 section mismatches Warnings: arch/arm64/configs/defconfig:218:warning: override: reassigning to symbol MMC_BLOCK_MINORS <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wmaybe-uninitialized] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- defconfig+CONFIG_LKDTM=y (x86) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+CONFIG_OF_UNITTEST=y (arm64) — PASS, 0 errors, 6 warnings, 0 section mismatches Warnings: arch/arm64/configs/defconfig:218:warning: override: reassigning to symbol MMC_BLOCK_MINORS <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wmaybe-uninitialized] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- defconfig+CONFIG_OF_UNITTEST=y (x86) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+CONFIG_RANDOMIZE_BASE=y (arm64) — PASS, 0 errors, 6 warnings, 0 section mismatches Warnings: arch/arm64/configs/defconfig:218:warning: override: reassigning to symbol MMC_BLOCK_MINORS <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wmaybe-uninitialized] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- defconfig+kvm_guest (x86) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wmaybe-uninitialized] -------------------------------------------------------------------------------- dove_defconfig (arm) — FAIL, 1 error, 3 warnings, 0 section mismatches Errors: drivers/phy/phy-core.c:848:4: error: implicit declaration of function 'of_get_next_parent' [-Werror=implicit-function-declaration] Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] drivers/phy/phy-core.c:848:11: warning: assignment makes pointer from integer without a cast [enabled by default] -------------------------------------------------------------------------------- ebsa110_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- efm32_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- em_x270_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- ep93xx_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- eseries_pxa_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- exynos_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- ezx_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- footbridge_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- h3600_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- h5000_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- hackkit_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- hisi_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- i386_defconfig (x86) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- imote2_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- imx_v4_v5_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- imx_v6_v7_defconfig (arm) — PASS, 0 errors, 6 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- integrator_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- iop13xx_defconfig (arm) — PASS, 0 errors, 5 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- iop32x_defconfig (arm) — PASS, 0 errors, 5 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- iop33x_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- ixp4xx_defconfig (arm) — PASS, 0 errors, 5 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] net/bridge/br_mdb.c:569:19: warning: 'pg' may be used uninitialized in this function [-Wmaybe-uninitialized] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- jornada720_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- keystone_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- ks8695_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- lart_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- lpc18xx_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- lpc32xx_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- lpd270_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- lubbock_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- magician_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- mainstone_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- mini2440_defconfig (arm) — PASS, 0 errors, 6 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] net/bridge/br_mdb.c:569:19: warning: 'pg' may be used uninitialized in this function [-Wmaybe-uninitialized] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- mmp2_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- moxart_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- multi_v5_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- multi_v7_defconfig (arm) — PASS, 0 errors, 19 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/media/v4l2-core/v4l2-mc.c:37:69: warning: unused variable 'dtv_demod' [-Wunused-variable] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] drivers/usb/host/xhci-tegra.c:555:6: warning: 'err' may be used uninitialized in this function [-Wuninitialized] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_ARM_LPAE=y (arm) — PASS, 0 errors, 20 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/bus/mvebu-mbus.c:975:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'phys_addr_t' [-Wformat] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/media/v4l2-core/v4l2-mc.c:37:69: warning: unused variable 'dtv_demod' [-Wunused-variable] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] drivers/usb/host/xhci-tegra.c:555:6: warning: 'err' may be used uninitialized in this function [-Wuninitialized] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y (arm) — PASS, 0 errors, 19 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/media/v4l2-core/v4l2-mc.c:37:69: warning: unused variable 'dtv_demod' [-Wunused-variable] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] drivers/usb/host/xhci-tegra.c:555:6: warning: 'err' may be used uninitialized in this function [-Wuninitialized] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_EFI=y (arm) — PASS, 0 errors, 19 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/media/v4l2-core/v4l2-mc.c:37:69: warning: unused variable 'dtv_demod' [-Wunused-variable] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] drivers/usb/host/xhci-tegra.c:555:6: warning: 'err' may be used uninitialized in this function [-Wuninitialized] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_EFI=y+CONFIG_ARM_LPAE=y (arm) — PASS, 0 errors, 20 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] drivers/bus/mvebu-mbus.c:975:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'phys_addr_t' [-Wformat] net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/media/v4l2-core/v4l2-mc.c:37:69: warning: unused variable 'dtv_demod' [-Wunused-variable] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] drivers/usb/host/xhci-tegra.c:555:6: warning: 'err' may be used uninitialized in this function [-Wuninitialized] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_LKDTM=y (arm) — PASS, 0 errors, 19 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/media/v4l2-core/v4l2-mc.c:37:69: warning: unused variable 'dtv_demod' [-Wunused-variable] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] drivers/usb/host/xhci-tegra.c:555:6: warning: 'err' may be used uninitialized in this function [-Wuninitialized] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_PROVE_LOCKING=y (arm) — PASS, 0 errors, 19 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/media/v4l2-core/v4l2-mc.c:37:69: warning: unused variable 'dtv_demod' [-Wunused-variable] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] drivers/usb/host/xhci-tegra.c:555:6: warning: 'err' may be used uninitialized in this function [-Wuninitialized] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_SMP=n (arm) — PASS, 0 errors, 19 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/media/v4l2-core/v4l2-mc.c:37:69: warning: unused variable 'dtv_demod' [-Wunused-variable] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] drivers/usb/host/xhci-tegra.c:555:6: warning: 'err' may be used uninitialized in this function [-Wuninitialized] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_THUMB2_KERNEL=y+CONFIG_ARM_MODULE_PLTS=y (arm) — PASS, 0 errors, 19 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/media/v4l2-core/v4l2-mc.c:37:69: warning: unused variable 'dtv_demod' [-Wunused-variable] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] drivers/usb/host/xhci-tegra.c:555:6: warning: 'err' may be used uninitialized in this function [-Wuninitialized] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- mv78xx0_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- mvebu_v5_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- mvebu_v7_defconfig (arm) — PASS, 0 errors, 6 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y (arm) — PASS, 0 errors, 6 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- mxs_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- neponset_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- netwinder_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- netx_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- nhk8815_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- nuc910_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- nuc950_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- nuc960_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- omap1_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- omap2plus_defconfig (arm) — PASS, 0 errors, 7 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/media/v4l2-core/v4l2-mc.c:37:69: warning: unused variable 'dtv_demod' [-Wunused-variable] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- orion5x_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- palmz72_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- pcm027_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- pleb_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- prima2_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- pxa168_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- pxa255-idp_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- pxa3xx_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- pxa910_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- pxa_defconfig (arm) — PASS, 0 errors, 6 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] net/bridge/br_mdb.c:569:19: warning: 'pg' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/media/v4l2-core/v4l2-mc.c:37:69: warning: unused variable 'dtv_demod' [-Wunused-variable] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- qcom_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- raumfeld_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- realview_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- rpc_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- s3c2410_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- s3c6400_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- s5pv210_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- sama5_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- shannon_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- shmobile_defconfig (arm) — PASS, 0 errors, 3 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] drivers/media/v4l2-core/v4l2-mc.c:37:69: warning: unused variable 'dtv_demod' [-Wunused-variable] -------------------------------------------------------------------------------- simpad_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- socfpga_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- spear13xx_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- spear3xx_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- spear6xx_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- spitz_defconfig (arm) — PASS, 0 errors, 5 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- stm32_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- sunxi_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- tct_hammer_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- tegra_defconfig (arm) — PASS, 0 errors, 8 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/usb/host/xhci-tegra.c:555:6: warning: 'err' may be used uninitialized in this function [-Wuninitialized] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- tinyconfig (arm64) — PASS, 0 errors, 3 warnings, 0 section mismatches Warnings: .config:914:warning: override: SLOB changes choice state <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- tinyconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: .config:852:warning: override: KERNEL_XZ changes choice state .config:854:warning: override: SLOB changes choice state <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- tinyconfig (x86) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: .config:945:warning: override: KERNEL_XZ changes choice state .config:947:warning: override: SLOB changes choice state .config:948:warning: override: NOHIGHMEM changes choice state mm/page_alloc.c:5989:34: warning: array subscript is below array bounds [-Warray-bounds] -------------------------------------------------------------------------------- trizeps4_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- u300_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- u8500_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- versatile_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- versatile_defconfig+CONFIG_OF_UNITTEST=y (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- vexpress_defconfig (arm) — PASS, 0 errors, 5 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- vf610m4_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- viper_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- vt8500_v6_v7_defconfig (arm) — PASS, 0 errors, 11 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] -------------------------------------------------------------------------------- x86_64_defconfig (x86) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- xcep_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- zeus_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- zx_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] --- For more info write to <info(a)kernelci.org>

8 years, 8 months

v3.4.112 build: 2 failures 30 warnings (v3.4.112)

by Build bot for Mark Brown

Tree/Branch: v3.4.112 Git describe: v3.4.112 Commit: 343a5fbeef Linux 3.4.112 Build Time: 0 min 4 sec Passed: 2 / 4 ( 50.00 %) Failed: 2 / 4 ( 50.00 %) Errors: 4 Warnings: 30 Section Mismatches: 0 Failed defconfigs: arm-allmodconfig arm-allnoconfig Errors: arm-allnoconfig /home/broonie/build/linux-stable/arch/arm/include/asm/div64.h:77:7: error: '__LINUX_ARM_ARCH__' undeclared (first use in this function) /home/broonie/build/linux-stable/arch/arm/include/asm/glue-cache.h:129:2: error: #error Unknown cache maintenance model /home/broonie/build/linux-stable/arch/arm/include/asm/glue-df.h:107:2: error: #error Unknown data abort handler type /home/broonie/build/linux-stable/arch/arm/include/asm/glue-pf.h:54:2: error: #error Unknown prefetch abort handler type ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): 9 warnings 0 mismatches : x86_64-allnoconfig 2 warnings 0 mismatches : arm-allmodconfig 19 warnings 0 mismatches : arm-allnoconfig 5 warnings 0 mismatches : x86_64-defconfig ------------------------------------------------------------------------------- Errors summary: 4 1 /home/broonie/build/linux-stable/arch/arm/include/asm/glue-pf.h:54:2: error: #error Unknown prefetch abort handler type 1 /home/broonie/build/linux-stable/arch/arm/include/asm/glue-df.h:107:2: error: #error Unknown data abort handler type 1 /home/broonie/build/linux-stable/arch/arm/include/asm/glue-cache.h:129:2: error: #error Unknown cache maintenance model 1 /home/broonie/build/linux-stable/arch/arm/include/asm/div64.h:77:7: error: '__LINUX_ARM_ARCH__' undeclared (first use in this function) Warnings Summary: 30 2 /home/broonie/build/linux-stable/mm/slub.c:4510:11: warning: 'x' may be used uninitialized in this function [-Wmaybe-uninitialized] 2 /home/broonie/build/linux-stable/fs/namespace.c:2390:8: warning: 'kernel_type' may be used uninitialized in this function [-Wmaybe-uninitialized] 2 /home/broonie/build/linux-stable/fs/namespace.c:2390:8: warning: 'kernel_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] 2 /home/broonie/build/linux-stable/drivers/base/topology.c:43:15: warning: unused variable 'cpu' [-Wunused-variable] 2 .config:26:warning: symbol value '' invalid for PHYS_OFFSET 1 /home/broonie/build/linux-stable/net/ipv4/sysctl_net_ipv4.c:29:12: warning: 'zero' defined but not used [-Wunused-variable] 1 /home/broonie/build/linux-stable/fs/compat_ioctl.c:611:38: warning: typedef 'SS' locally defined but not used [-Wunused-local-typedefs] 1 /home/broonie/build/linux-stable/arch/x86/kernel/quirks.c:407:21: warning: 'val' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 /home/broonie/build/linux-stable/arch/x86/kernel/quirks.c:367:4: warning: 'd' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 /home/broonie/build/linux-stable/arch/x86/kernel/quirks.c:361:4: warning: 'b' is used uninitialized in this function [-Wuninitialized] 1 /home/broonie/build/linux-stable/arch/x86/kernel/apic/io_apic.c:382:13: warning: 'io_apic_level_ack_pending' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/arch/arm/include/asm/swab.h:46:29: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable/arch/arm/include/asm/swab.h:26:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable/arch/arm/include/asm/processor.h:81:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable/arch/arm/include/asm/processor.h:103:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable/arch/arm/include/asm/irqflags.h:11:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable/arch/arm/include/asm/fpstate.h:32:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable/arch/arm/include/asm/cmpxchg.h:40:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable/arch/arm/include/asm/cmpxchg.h:33:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable/arch/arm/include/asm/cmpxchg.h:108:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable/arch/arm/include/asm/cachetype.h:33:7: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable/arch/arm/include/asm/cachetype.h:28:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable/arch/arm/include/asm/cacheflush.h:196:7: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable/arch/arm/include/asm/cacheflush.h:194:7: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable/arch/arm/include/asm/bitops.h:217:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable/arch/arm/include/asm/barrier.h:9:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable/arch/arm/include/asm/barrier.h:20:35: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable/arch/arm/include/asm/barrier.h:16:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable/arch/arm/include/asm/barrier.h:10:3: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable/arch/arm/include/asm/atomic.h:32:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- x86_64-allnoconfig : PASS, 0 errors, 9 warnings, 0 section mismatches Warnings: /home/broonie/build/linux-stable/arch/x86/kernel/quirks.c:361:4: warning: 'b' is used uninitialized in this function [-Wuninitialized] /home/broonie/build/linux-stable/arch/x86/kernel/quirks.c:367:4: warning: 'd' may be used uninitialized in this function [-Wmaybe-uninitialized] /home/broonie/build/linux-stable/arch/x86/kernel/quirks.c:407:21: warning: 'val' may be used uninitialized in this function [-Wmaybe-uninitialized] /home/broonie/build/linux-stable/fs/namespace.c:2390:8: warning: 'kernel_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] /home/broonie/build/linux-stable/fs/namespace.c:2390:8: warning: 'kernel_type' may be used uninitialized in this function [-Wmaybe-uninitialized] /home/broonie/build/linux-stable/drivers/base/topology.c:43:15: warning: unused variable 'cpu' [-Wunused-variable] /home/broonie/build/linux-stable/drivers/base/topology.c:43:15: warning: unused variable 'cpu' [-Wunused-variable] /home/broonie/build/linux-stable/arch/x86/kernel/apic/io_apic.c:382:13: warning: 'io_apic_level_ack_pending' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/mm/slub.c:4510:11: warning: 'x' may be used uninitialized in this function [-Wmaybe-uninitialized] ------------------------------------------------------------------------------- arm-allmodconfig : FAIL, 0 errors, 2 warnings, 0 section mismatches Warnings: .config:26:warning: symbol value '' invalid for PHYS_OFFSET .config:26:warning: symbol value '' invalid for PHYS_OFFSET ------------------------------------------------------------------------------- arm-allnoconfig : FAIL, 4 errors, 19 warnings, 0 section mismatches Errors: /home/broonie/build/linux-stable/arch/arm/include/asm/div64.h:77:7: error: '__LINUX_ARM_ARCH__' undeclared (first use in this function) /home/broonie/build/linux-stable/arch/arm/include/asm/glue-cache.h:129:2: error: #error Unknown cache maintenance model /home/broonie/build/linux-stable/arch/arm/include/asm/glue-df.h:107:2: error: #error Unknown data abort handler type /home/broonie/build/linux-stable/arch/arm/include/asm/glue-pf.h:54:2: error: #error Unknown prefetch abort handler type Warnings: /home/broonie/build/linux-stable/arch/arm/include/asm/irqflags.h:11:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable/arch/arm/include/asm/bitops.h:217:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable/arch/arm/include/asm/swab.h:26:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable/arch/arm/include/asm/swab.h:46:29: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable/arch/arm/include/asm/fpstate.h:32:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable/arch/arm/include/asm/barrier.h:9:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable/arch/arm/include/asm/barrier.h:10:3: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable/arch/arm/include/asm/barrier.h:16:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable/arch/arm/include/asm/barrier.h:20:35: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable/arch/arm/include/asm/processor.h:81:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable/arch/arm/include/asm/processor.h:103:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable/arch/arm/include/asm/cmpxchg.h:33:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable/arch/arm/include/asm/cmpxchg.h:40:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable/arch/arm/include/asm/cmpxchg.h:108:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable/arch/arm/include/asm/atomic.h:32:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable/arch/arm/include/asm/cachetype.h:28:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable/arch/arm/include/asm/cachetype.h:33:7: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable/arch/arm/include/asm/cacheflush.h:194:7: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable/arch/arm/include/asm/cacheflush.h:196:7: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] ------------------------------------------------------------------------------- x86_64-defconfig : PASS, 0 errors, 5 warnings, 0 section mismatches Warnings: /home/broonie/build/linux-stable/fs/namespace.c:2390:8: warning: 'kernel_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] /home/broonie/build/linux-stable/fs/namespace.c:2390:8: warning: 'kernel_type' may be used uninitialized in this function [-Wmaybe-uninitialized] /home/broonie/build/linux-stable/mm/slub.c:4510:11: warning: 'x' may be used uninitialized in this function [-Wmaybe-uninitialized] /home/broonie/build/linux-stable/fs/compat_ioctl.c:611:38: warning: typedef 'SS' locally defined but not used [-Wunused-local-typedefs] /home/broonie/build/linux-stable/net/ipv4/sysctl_net_ipv4.c:29:12: warning: 'zero' defined but not used [-Wunused-variable] ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches:

8 years, 8 months

next-20160427 build: 1 failures 15 warnings (next-20160427)

by Build bot for Mark Brown

Tree/Branch: next-20160427 Git describe: next-20160427 Commit: a9f10f32e9 Add linux-next specific files for 20160427 Build Time: 78 min 31 sec Passed: 8 / 9 ( 88.89 %) Failed: 1 / 9 ( 11.11 %) Errors: 1 Warnings: 15 Section Mismatches: 0 Failed defconfigs: arm64-allmodconfig Errors: arm64-allmodconfig ../drivers/phy/tegra/xusb-tegra210.c:1721:3: error: label 'out' used but not defined ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): 9 warnings 0 mismatches : arm64-allmodconfig 5 warnings 0 mismatches : arm-multi_v7_defconfig 11 warnings 0 mismatches : arm-allmodconfig 2 warnings 0 mismatches : arm-multi_v5_defconfig 3 warnings 0 mismatches : arm64-defconfig ------------------------------------------------------------------------------- Errors summary: 1 1 ../drivers/phy/tegra/xusb-tegra210.c:1721:3: error: label 'out' used but not defined Warnings Summary: 15 5 ../include/linux/export.h:63:25: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] 5 ../drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] 3 ../drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] 3 ../drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] 3 ../drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] 2 ../drivers/pinctrl/sh-pfc/core.c:603:17: warning: unused variable 'pfc' [-Wunused-variable] 1 ../lib/lz4/lz4hc_compress.c:514:1: warning: the frame size of 1472 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 ../include/soc/nps/common.h:162:9: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 ../include/soc/nps/common.h:148:9: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 ../drivers/phy/tegra/xusb-tegra210.c:1741:1: warning: label 'free' defined but not used [-Wunused-label] 1 ../drivers/net/ethernet/mellanox/mlx5/core/en_main.c:1304:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 ../drivers/mtd/chips/cfi_cmdset_0020.c:651:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 ../drivers/gpu/drm/omapdrm/dss/hdmi5.c:134:2: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] 1 ../drivers/gpu/drm/omapdrm/dss/hdmi4.c:117:2: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] 1 ../drivers/gpu/drm/omapdrm/dss/dsi.c:1183:2: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- arm64-allmodconfig : FAIL, 1 errors, 9 warnings, 0 section mismatches Errors: ../drivers/phy/tegra/xusb-tegra210.c:1721:3: error: label 'out' used but not defined Warnings: ../drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] ../drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../include/soc/nps/common.h:148:9: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] ../include/soc/nps/common.h:162:9: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] ../drivers/phy/tegra/xusb-tegra210.c:1741:1: warning: label 'free' defined but not used [-Wunused-label] ../drivers/pinctrl/sh-pfc/core.c:603:17: warning: unused variable 'pfc' [-Wunused-variable] ../drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../include/linux/export.h:63:25: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ------------------------------------------------------------------------------- arm-multi_v7_defconfig : PASS, 0 errors, 5 warnings, 0 section mismatches Warnings: ../drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] ../drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../include/linux/export.h:63:25: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ------------------------------------------------------------------------------- arm-allmodconfig : PASS, 0 errors, 11 warnings, 0 section mismatches Warnings: ../lib/lz4/lz4hc_compress.c:514:1: warning: the frame size of 1472 bytes is larger than 1024 bytes [-Wframe-larger-than=] ../drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] ../drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../drivers/gpu/drm/omapdrm/dss/dsi.c:1183:2: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../drivers/gpu/drm/omapdrm/dss/hdmi4.c:117:2: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../drivers/gpu/drm/omapdrm/dss/hdmi5.c:134:2: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../drivers/mtd/chips/cfi_cmdset_0020.c:651:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] ../drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../include/linux/export.h:63:25: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../drivers/net/ethernet/mellanox/mlx5/core/en_main.c:1304:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=] ------------------------------------------------------------------------------- arm-multi_v5_defconfig : PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: ../drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../include/linux/export.h:63:25: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ------------------------------------------------------------------------------- arm64-defconfig : PASS, 0 errors, 3 warnings, 0 section mismatches Warnings: ../drivers/pinctrl/sh-pfc/core.c:603:17: warning: unused variable 'pfc' [-Wunused-variable] ../drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../include/linux/export.h:63:25: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: x86_64-allnoconfig arm64-allnoconfig arm-allnoconfig x86_64-defconfig close failed in file object destructor: sys.excepthook is missing lost sys.stderr

8 years, 8 months

master build: 1 failures 15 warnings (v4.6-rc5-7104-g29fab3a)

by Build bot for Mark Brown

Tree/Branch: master Git describe: v4.6-rc5-7104-g29fab3a Commit: 29fab3a5a2 Add linux-next specific files for 20160427 Build Time: 78 min 40 sec Passed: 8 / 9 ( 88.89 %) Failed: 1 / 9 ( 11.11 %) Errors: 1 Warnings: 15 Section Mismatches: 0 Failed defconfigs: arm64-allmodconfig Errors: arm64-allmodconfig ../drivers/phy/tegra/xusb-tegra210.c:1721:3: error: label 'out' used but not defined ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): 9 warnings 0 mismatches : arm64-allmodconfig 5 warnings 0 mismatches : arm-multi_v7_defconfig 11 warnings 0 mismatches : arm-allmodconfig 2 warnings 0 mismatches : arm-multi_v5_defconfig 3 warnings 0 mismatches : arm64-defconfig ------------------------------------------------------------------------------- Errors summary: 1 1 ../drivers/phy/tegra/xusb-tegra210.c:1721:3: error: label 'out' used but not defined Warnings Summary: 15 5 ../include/linux/export.h:63:25: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] 5 ../drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] 3 ../drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] 3 ../drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] 3 ../drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] 2 ../drivers/pinctrl/sh-pfc/core.c:603:17: warning: unused variable 'pfc' [-Wunused-variable] 1 ../lib/lz4/lz4hc_compress.c:514:1: warning: the frame size of 1472 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 ../include/soc/nps/common.h:162:9: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 ../include/soc/nps/common.h:148:9: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 ../drivers/phy/tegra/xusb-tegra210.c:1741:1: warning: label 'free' defined but not used [-Wunused-label] 1 ../drivers/net/ethernet/mellanox/mlx5/core/en_main.c:1304:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 ../drivers/mtd/chips/cfi_cmdset_0020.c:651:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 ../drivers/gpu/drm/omapdrm/dss/hdmi5.c:134:2: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] 1 ../drivers/gpu/drm/omapdrm/dss/hdmi4.c:117:2: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] 1 ../drivers/gpu/drm/omapdrm/dss/dsi.c:1183:2: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- arm64-allmodconfig : FAIL, 1 errors, 9 warnings, 0 section mismatches Errors: ../drivers/phy/tegra/xusb-tegra210.c:1721:3: error: label 'out' used but not defined Warnings: ../drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] ../drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../include/soc/nps/common.h:148:9: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] ../include/soc/nps/common.h:162:9: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] ../drivers/phy/tegra/xusb-tegra210.c:1741:1: warning: label 'free' defined but not used [-Wunused-label] ../drivers/pinctrl/sh-pfc/core.c:603:17: warning: unused variable 'pfc' [-Wunused-variable] ../drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../include/linux/export.h:63:25: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ------------------------------------------------------------------------------- arm-multi_v7_defconfig : PASS, 0 errors, 5 warnings, 0 section mismatches Warnings: ../drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] ../drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../include/linux/export.h:63:25: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ------------------------------------------------------------------------------- arm-allmodconfig : PASS, 0 errors, 11 warnings, 0 section mismatches Warnings: ../lib/lz4/lz4hc_compress.c:514:1: warning: the frame size of 1472 bytes is larger than 1024 bytes [-Wframe-larger-than=] ../drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] ../drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../drivers/gpu/drm/omapdrm/dss/dsi.c:1183:2: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../drivers/gpu/drm/omapdrm/dss/hdmi4.c:117:2: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../drivers/gpu/drm/omapdrm/dss/hdmi5.c:134:2: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../drivers/mtd/chips/cfi_cmdset_0020.c:651:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] ../drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../include/linux/export.h:63:25: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../drivers/net/ethernet/mellanox/mlx5/core/en_main.c:1304:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=] ------------------------------------------------------------------------------- arm-multi_v5_defconfig : PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: ../drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../include/linux/export.h:63:25: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ------------------------------------------------------------------------------- arm64-defconfig : PASS, 0 errors, 3 warnings, 0 section mismatches Warnings: ../drivers/pinctrl/sh-pfc/core.c:603:17: warning: unused variable 'pfc' [-Wunused-variable] ../drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../include/linux/export.h:63:25: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: x86_64-allnoconfig arm64-allnoconfig arm-allnoconfig x86_64-defconfig close failed in file object destructor: sys.excepthook is missing lost sys.stderr

8 years, 8 months

next boot: 223 boots: 11 failed, 201 passed with 9 offline, 2 conflicts (next-20160427)

by kernelci.org bot

next boot: 223 boots: 11 failed, 201 passed with 9 offline, 2 conflicts (next-20160427) Full Boot Summary: https://kernelci.org/boot/all/job/next/kernel/next-20160427/ Full Build Summary: https://kernelci.org/build/next/kernel/next-20160427/ Tree: next Branch: local/master Git Describe: next-20160427 Git Commit: 29fab3a5a2a1e818385271cfe29db98438191a79 Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git Tested: 40 unique boards, 13 SoC families, 30 builds out of 141 Boot Failures Detected: https://kernelci.org/boot/?next-20160427&fail arm: multi_v7_defconfig+CONFIG_EFI=y: imx53-qsrb: 1 failed lab imx6dl-riotboard: 1 failed lab socfpga_cyclone5_socrates: 1 failed lab multi_v7_defconfig+CONFIG_PROVE_LOCKING=y: armada-388-clearfog: 1 failed lab tegra_defconfig: tegra124-jetson-tk1_rootfs:nfs: 2 failed labs multi_v7_defconfig+CONFIG_SMP=n: armada-388-clearfog: 1 failed lab armada-xp-openblocks-ax3-4: 1 failed lab multi_v7_defconfig+CONFIG_THUMB2_KERNEL=y+CONFIG_ARM_MODULE_PLTS=y: socfpga_cyclone5_socrates: 1 failed lab at91_dt_defconfig: at91sam9x25ek: 1 failed lab multi_v7_defconfig: sun7i-a20-cubieboard2_rootfs:nfs: 1 failed lab Offline Platforms: arm: multi_v7_defconfig+CONFIG_EFI=y: hip04-d01: 1 offline lab qcom-apq8064-ifc6410: 1 offline lab multi_v7_defconfig+CONFIG_EFI=y+CONFIG_ARM_LPAE=y: hip04-d01: 1 offline lab multi_v7_defconfig+CONFIG_PROVE_LOCKING=y: qcom-apq8064-ifc6410: 1 offline lab multi_v7_defconfig+CONFIG_THUMB2_KERNEL=y+CONFIG_ARM_MODULE_PLTS=y: qcom-apq8064-ifc6410: 1 offline lab qcom_defconfig: qcom-apq8064-ifc6410: 1 offline lab multi_v7_defconfig+CONFIG_LKDTM=y: qcom-apq8064-ifc6410: 1 offline lab multi_v7_defconfig: imx6q-cm-fx6_rootfs:nfs: 1 offline lab qcom-apq8064-ifc6410: 1 offline lab Conflicting Boot Failures Detected: (These likely are not failures as other labs are reporting PASS. Needs review.) arm: multi_v7_defconfig+CONFIG_EFI=y+CONFIG_ARM_LPAE=y: tegra124-jetson-tk1: lab-pengutronix: FAIL lab-mhart: PASS multi_v7_defconfig+CONFIG_PROVE_LOCKING=y: tegra124-jetson-tk1: lab-pengutronix: FAIL lab-mhart: PASS --- For more info write to <info(a)kernelci.org>

8 years, 8 months

next build: 141 builds: 4 failed, 137 passed, 4 errors, 369 warnings (next-20160427)

by kernelci.org bot

next build: 141 builds: 4 failed, 137 passed, 4 errors, 369 warnings (next-20160427) Full Build Summary: https://kernelci.org/build/next/kernel/next-20160427/ Tree: next Branch: local/master Git Describe: next-20160427 Git Commit: 29fab3a5a2a1e818385271cfe29db98438191a79 Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git Built: 3 unique architectures Build Failures Detected: arm64: allmodconfig: FAIL x86: allmodconfig: FAIL allmodconfig+CONFIG_OF=n: FAIL arm: dove_defconfig: FAIL Errors and Warnings Detected: arm64: allmodconfig: 1 error, 9 warnings defconfig: 4 warnings defconfig+CONFIG_CPU_BIG_ENDIAN=y: 4 warnings defconfig+CONFIG_EXPERT=y+CONFIG_ACPI=y: 4 warnings defconfig+CONFIG_LKDTM=y: 4 warnings defconfig+CONFIG_OF_UNITTEST=y: 4 warnings defconfig+CONFIG_RANDOMIZE_BASE=y: 4 warnings tinyconfig: 1 warning x86: allmodconfig: 1 error allmodconfig+CONFIG_OF=n: 1 error defconfig+kvm_guest: 1 warning i386_defconfig: 2 warnings tinyconfig: 4 warnings arm: allmodconfig: 57 warnings at91_dt_defconfig: 2 warnings axm55xx_defconfig: 1 warning bcm_defconfig: 2 warnings cm_x300_defconfig: 2 warnings corgi_defconfig: 1 warning davinci_all_defconfig: 3 warnings dove_defconfig: 1 error, 1 warning em_x270_defconfig: 2 warnings exynos_defconfig: 2 warnings ezx_defconfig: 2 warnings imote2_defconfig: 2 warnings imx_v4_v5_defconfig: 2 warnings imx_v6_v7_defconfig: 4 warnings iop13xx_defconfig: 1 warning iop32x_defconfig: 1 warning magician_defconfig: 2 warnings mini2440_defconfig: 1 warning mmp2_defconfig: 2 warnings mps2_defconfig: 1 warning multi_v5_defconfig: 2 warnings multi_v7_defconfig: 19 warnings multi_v7_defconfig+CONFIG_ARM_LPAE=y: 19 warnings multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y: 19 warnings multi_v7_defconfig+CONFIG_EFI=y: 19 warnings multi_v7_defconfig+CONFIG_EFI=y+CONFIG_ARM_LPAE=y: 19 warnings multi_v7_defconfig+CONFIG_LKDTM=y: 19 warnings multi_v7_defconfig+CONFIG_PROVE_LOCKING=y: 19 warnings multi_v7_defconfig+CONFIG_SMP=n: 19 warnings multi_v7_defconfig+CONFIG_THUMB2_KERNEL=y+CONFIG_ARM_MODULE_PLTS=y: 19 warnings mvebu_v5_defconfig: 2 warnings mvebu_v7_defconfig: 4 warnings mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y: 4 warnings mxs_defconfig: 2 warnings nhk8815_defconfig: 2 warnings omap1_defconfig: 2 warnings omap2plus_defconfig: 8 warnings pxa3xx_defconfig: 2 warnings pxa_defconfig: 3 warnings qcom_defconfig: 2 warnings raumfeld_defconfig: 2 warnings sama5_defconfig: 2 warnings socfpga_defconfig: 2 warnings spitz_defconfig: 1 warning sunxi_defconfig: 2 warnings tegra_defconfig: 6 warnings tinyconfig: 2 warnings u300_defconfig: 2 warnings u8500_defconfig: 2 warnings vexpress_defconfig: 3 warnings vt8500_v6_v7_defconfig: 9 warnings Errors summary: 2 elf.c:358:32: error: 'ELF_C_READ_MMAP' undeclared (first use in this function) 1 drivers/phy/tegra/xusb-tegra210.c:1721:3: error: label 'out' used but not defined 1 drivers/phy/phy-core.c:848:4: error: implicit declaration of function 'of_get_next_parent' [-Werror=implicit-function-declaration] Warnings summary: 49 drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] 46 include/linux/fs.h:2656:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] 38 drivers/regulator/core.c:2536:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] 14 net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] 14 net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] 11 drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] 11 drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] 11 drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] 11 drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] 10 sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] 10 drivers/usb/host/xhci-tegra.c:555:6: warning: 'err' may be used uninitialized in this function [-Wuninitialized] 10 drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] 10 drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] 10 drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] 10 drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] 10 drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] 10 drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] 10 drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] 10 drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] 10 drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] 8 drivers/regulator/core.c:2536:692: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] 7 drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wmaybe-uninitialized] 7 drivers/pinctrl/sh-pfc/core.c:603:17: warning: unused variable 'pfc' [-Wunused-variable] 5 crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] 2 fs/xfs/xfs_aops.c:97:15: warning: unused variable 'blockmask' [-Wunused-variable] 1 mm/page_alloc.c:6456:34: warning: array subscript is below array bounds [-Warray-bounds] 1 include/soc/nps/common.h:162:9: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 include/soc/nps/common.h:148:9: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 include/linux/export.h:63:25: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] 1 drivers/video/fbdev/omap2/omapfb/dss/hdmi5.c:134:2: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] 1 drivers/video/fbdev/omap2/omapfb/dss/hdmi4.c:117:2: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] 1 drivers/video/fbdev/omap2/omapfb/dss/dsi.c:1183:2: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] 1 drivers/phy/tegra/xusb-tegra210.c:1741:1: warning: label 'free' defined but not used [-Wunused-label] 1 drivers/phy/phy-core.c:848:11: warning: assignment makes pointer from integer without a cast [enabled by default] 1 drivers/net/ethernet/mellanox/mlx5/core/en_main.c:1304:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 drivers/gpu/drm/omapdrm/dss/hdmi5.c:134:2: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] 1 drivers/gpu/drm/omapdrm/dss/hdmi4.c:117:2: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] 1 drivers/gpu/drm/omapdrm/dss/dsi.c:1183:2: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] 1 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c:182:1: warning: the frame size of 1064 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 crypto/wp512.c:987:1: warning: the frame size of 1112 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 arch/x86/kernel/early-quirks.c:539:9: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] 1 arch/x86/kernel/early-quirks.c:539:9: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 2 has type 'phys_addr_t' [-Wformat=] 1 arch/arm/configs/omap2plus_defconfig:112:warning: symbol value 'm' invalid for RXKAD 1 arch/arm/configs/mps2_defconfig:102:warning: symbol value 'y' invalid for PRINTK_TIME 1 .config:959:warning: override: NOHIGHMEM changes choice state 1 .config:958:warning: override: SLOB changes choice state 1 .config:956:warning: override: KERNEL_XZ changes choice state 1 .config:924:warning: override: SLOB changes choice state 1 .config:863:warning: override: SLOB changes choice state 1 .config:861:warning: override: KERNEL_XZ changes choice state ================================================================================ Detailed per-defconfig build reports: -------------------------------------------------------------------------------- acs5k_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- acs5k_tiny_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- allmodconfig (arm64) — FAIL, 1 error, 9 warnings, 0 section mismatches Errors: drivers/phy/tegra/xusb-tegra210.c:1721:3: error: label 'out' used but not defined Warnings: drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] include/soc/nps/common.h:148:9: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] include/soc/nps/common.h:162:9: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] drivers/phy/tegra/xusb-tegra210.c:1741:1: warning: label 'free' defined but not used [-Wunused-label] drivers/pinctrl/sh-pfc/core.c:603:17: warning: unused variable 'pfc' [-Wunused-variable] drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] include/linux/export.h:63:25: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- allmodconfig (arm) — PASS, 0 errors, 57 warnings, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1112 bytes is larger than 1024 bytes [-Wframe-larger-than=] drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c:182:1: warning: the frame size of 1064 bytes is larger than 1024 bytes [-Wframe-larger-than=] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/omapdrm/dss/dsi.c:1183:2: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/omapdrm/dss/hdmi4.c:117:2: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/omapdrm/dss/hdmi5.c:134:2: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/net/ethernet/mellanox/mlx5/core/en_main.c:1304:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=] drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] include/linux/fs.h:2656:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] include/linux/fs.h:2656:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] include/linux/fs.h:2656:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] include/linux/fs.h:2656:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] include/linux/fs.h:2656:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] include/linux/fs.h:2656:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] include/linux/fs.h:2656:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] include/linux/fs.h:2656:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] include/linux/fs.h:2656:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] include/linux/fs.h:2656:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] include/linux/fs.h:2656:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] include/linux/fs.h:2656:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] include/linux/fs.h:2656:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] include/linux/fs.h:2656:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] include/linux/fs.h:2656:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] include/linux/fs.h:2656:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] include/linux/fs.h:2656:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] include/linux/fs.h:2656:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] include/linux/fs.h:2656:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] include/linux/fs.h:2656:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] include/linux/fs.h:2656:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] include/linux/fs.h:2656:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] include/linux/fs.h:2656:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] include/linux/fs.h:2656:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] include/linux/fs.h:2656:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] include/linux/fs.h:2656:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] include/linux/fs.h:2656:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] include/linux/fs.h:2656:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] include/linux/fs.h:2656:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] include/linux/fs.h:2656:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] include/linux/fs.h:2656:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] include/linux/fs.h:2656:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] include/linux/fs.h:2656:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] include/linux/fs.h:2656:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] include/linux/fs.h:2656:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] include/linux/fs.h:2656:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] include/linux/fs.h:2656:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] include/linux/fs.h:2656:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] include/linux/fs.h:2656:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] include/linux/fs.h:2656:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] include/linux/fs.h:2656:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] include/linux/fs.h:2656:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] include/linux/fs.h:2656:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] include/linux/fs.h:2656:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] include/linux/fs.h:2656:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] include/linux/fs.h:2656:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] -------------------------------------------------------------------------------- allmodconfig (x86) — FAIL, 1 error, 0 warnings, 0 section mismatches Errors: elf.c:358:32: error: 'ELF_C_READ_MMAP' undeclared (first use in this function) -------------------------------------------------------------------------------- allmodconfig+CONFIG_OF=n (x86) — FAIL, 1 error, 0 warnings, 0 section mismatches Errors: elf.c:358:32: error: 'ELF_C_READ_MMAP' undeclared (first use in this function) -------------------------------------------------------------------------------- allnoconfig (arm64) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- allnoconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- allnoconfig (x86) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- am200epdkit_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- assabet_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- at91_dt_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- axm55xx_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- badge4_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- bcm2835_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- bcm_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- cerfcube_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- clps711x_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- cm_x2xx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- cm_x300_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- cns3420vb_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- colibri_pxa270_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- colibri_pxa300_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- collie_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- corgi_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] -------------------------------------------------------------------------------- davinci_all_defconfig (arm) — PASS, 0 errors, 3 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:692: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] fs/xfs/xfs_aops.c:97:15: warning: unused variable 'blockmask' [-Wunused-variable] -------------------------------------------------------------------------------- defconfig (arm64) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: drivers/pinctrl/sh-pfc/core.c:603:17: warning: unused variable 'pfc' [-Wunused-variable] drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wmaybe-uninitialized] -------------------------------------------------------------------------------- defconfig+CONFIG_CPU_BIG_ENDIAN=y (arm64) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/pinctrl/sh-pfc/core.c:603:17: warning: unused variable 'pfc' [-Wunused-variable] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wmaybe-uninitialized] -------------------------------------------------------------------------------- defconfig+CONFIG_EXPERT=y+CONFIG_ACPI=y (arm64) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/pinctrl/sh-pfc/core.c:603:17: warning: unused variable 'pfc' [-Wunused-variable] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wmaybe-uninitialized] -------------------------------------------------------------------------------- defconfig+CONFIG_LKDTM=y (arm64) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: drivers/pinctrl/sh-pfc/core.c:603:17: warning: unused variable 'pfc' [-Wunused-variable] drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wmaybe-uninitialized] -------------------------------------------------------------------------------- defconfig+CONFIG_LKDTM=y (x86) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+CONFIG_OF_UNITTEST=y (arm64) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: drivers/pinctrl/sh-pfc/core.c:603:17: warning: unused variable 'pfc' [-Wunused-variable] drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wmaybe-uninitialized] -------------------------------------------------------------------------------- defconfig+CONFIG_OF_UNITTEST=y (x86) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+CONFIG_RANDOMIZE_BASE=y (arm64) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/pinctrl/sh-pfc/core.c:603:17: warning: unused variable 'pfc' [-Wunused-variable] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wmaybe-uninitialized] -------------------------------------------------------------------------------- defconfig+kvm_guest (x86) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wmaybe-uninitialized] -------------------------------------------------------------------------------- dove_defconfig (arm) — FAIL, 1 error, 1 warning, 0 section mismatches Errors: drivers/phy/phy-core.c:848:4: error: implicit declaration of function 'of_get_next_parent' [-Werror=implicit-function-declaration] Warnings: drivers/phy/phy-core.c:848:11: warning: assignment makes pointer from integer without a cast [enabled by default] -------------------------------------------------------------------------------- ebsa110_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- efm32_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- em_x270_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- ep93xx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- eseries_pxa_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- exynos_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- ezx_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:692: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- footbridge_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- h3600_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- h5000_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- hackkit_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- hisi_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- i386_defconfig (x86) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: arch/x86/kernel/early-quirks.c:539:9: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 2 has type 'phys_addr_t' [-Wformat=] arch/x86/kernel/early-quirks.c:539:9: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] -------------------------------------------------------------------------------- imote2_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:692: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- imx_v4_v5_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- imx_v6_v7_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:692: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- integrator_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- iop13xx_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] -------------------------------------------------------------------------------- iop32x_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] -------------------------------------------------------------------------------- iop33x_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- ixp4xx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- jornada720_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- keystone_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- ks8695_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- lart_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- lpc18xx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- lpc32xx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- lpd270_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- lubbock_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- magician_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- mainstone_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- mini2440_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] -------------------------------------------------------------------------------- mmp2_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- moxart_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- mps2_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: arch/arm/configs/mps2_defconfig:102:warning: symbol value 'y' invalid for PRINTK_TIME -------------------------------------------------------------------------------- multi_v5_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- multi_v7_defconfig (arm) — PASS, 0 errors, 19 warnings, 0 section mismatches Warnings: sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] drivers/usb/host/xhci-tegra.c:555:6: warning: 'err' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_ARM_LPAE=y (arm) — PASS, 0 errors, 19 warnings, 0 section mismatches Warnings: sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] drivers/usb/host/xhci-tegra.c:555:6: warning: 'err' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y (arm) — PASS, 0 errors, 19 warnings, 0 section mismatches Warnings: net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] drivers/usb/host/xhci-tegra.c:555:6: warning: 'err' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_EFI=y (arm) — PASS, 0 errors, 19 warnings, 0 section mismatches Warnings: sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] drivers/usb/host/xhci-tegra.c:555:6: warning: 'err' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_EFI=y+CONFIG_ARM_LPAE=y (arm) — PASS, 0 errors, 19 warnings, 0 section mismatches Warnings: sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] drivers/usb/host/xhci-tegra.c:555:6: warning: 'err' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_LKDTM=y (arm) — PASS, 0 errors, 19 warnings, 0 section mismatches Warnings: net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] drivers/usb/host/xhci-tegra.c:555:6: warning: 'err' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_PROVE_LOCKING=y (arm) — PASS, 0 errors, 19 warnings, 0 section mismatches Warnings: sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] drivers/usb/host/xhci-tegra.c:555:6: warning: 'err' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_SMP=n (arm) — PASS, 0 errors, 19 warnings, 0 section mismatches Warnings: sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] drivers/usb/host/xhci-tegra.c:555:6: warning: 'err' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_THUMB2_KERNEL=y+CONFIG_ARM_MODULE_PLTS=y (arm) — PASS, 0 errors, 19 warnings, 0 section mismatches Warnings: sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] drivers/usb/host/xhci-tegra.c:555:6: warning: 'err' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- mv78xx0_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- mvebu_v5_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- mvebu_v7_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- mxs_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:692: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- neponset_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- netwinder_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- netx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- nhk8815_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- nuc910_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- nuc950_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- nuc960_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- omap1_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- omap2plus_defconfig (arm) — PASS, 0 errors, 8 warnings, 0 section mismatches Warnings: arch/arm/configs/omap2plus_defconfig:112:warning: symbol value 'm' invalid for RXKAD net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:692: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/video/fbdev/omap2/omapfb/dss/hdmi4.c:117:2: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/video/fbdev/omap2/omapfb/dss/hdmi5.c:134:2: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/video/fbdev/omap2/omapfb/dss/dsi.c:1183:2: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- orion5x_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- palmz72_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- pcm027_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- pleb_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- prima2_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- pxa168_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- pxa255-idp_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- pxa3xx_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- pxa910_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- pxa_defconfig (arm) — PASS, 0 errors, 3 warnings, 0 section mismatches Warnings: fs/xfs/xfs_aops.c:97:15: warning: unused variable 'blockmask' [-Wunused-variable] drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:692: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- qcom_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:692: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- raumfeld_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- realview_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- rpc_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- s3c2410_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- s3c6400_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- s5pv210_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- sama5_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- shannon_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- shmobile_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- simpad_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- socfpga_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- spear13xx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- spear3xx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- spear6xx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- spitz_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] -------------------------------------------------------------------------------- stm32_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- sunxi_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- tct_hammer_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- tegra_defconfig (arm) — PASS, 0 errors, 6 warnings, 0 section mismatches Warnings: sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/usb/host/xhci-tegra.c:555:6: warning: 'err' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- tinyconfig (arm64) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: .config:924:warning: override: SLOB changes choice state -------------------------------------------------------------------------------- tinyconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: .config:861:warning: override: KERNEL_XZ changes choice state .config:863:warning: override: SLOB changes choice state -------------------------------------------------------------------------------- tinyconfig (x86) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: .config:956:warning: override: KERNEL_XZ changes choice state .config:958:warning: override: SLOB changes choice state .config:959:warning: override: NOHIGHMEM changes choice state mm/page_alloc.c:6456:34: warning: array subscript is below array bounds [-Warray-bounds] -------------------------------------------------------------------------------- trizeps4_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- u300_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- u8500_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- versatile_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- versatile_defconfig+CONFIG_OF_UNITTEST=y (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- vexpress_defconfig (arm) — PASS, 0 errors, 3 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2536:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/regulator/core.c:2536:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2520) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- vf610m4_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- viper_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- vt8500_v6_v7_defconfig (arm) — PASS, 0 errors, 9 warnings, 0 section mismatches Warnings: drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] -------------------------------------------------------------------------------- x86_64_defconfig (x86) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- xcep_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- zeus_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- zx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches --- For more info write to <info(a)kernelci.org>

8 years, 8 months

next build: 154 warnings 2 failures (next/next-20160427)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next, found at: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch) Topmost commit: a9f10f3 Add linux-next specific files for 20160427 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next/next-20160427/ Runtime: 58m 42s Passed: 117 Failed: 2 Warnings: 154 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: arm64.allmodconfig arm.dove_defconfig ------------------------------------------------------------------------------- Errors: arm64.allmodconfig: samples/seccomp/bpf-fancy.c:13:27: fatal error: linux/seccomp.h: No such file or directory samples/seccomp/bpf-helper.h:20:50: fatal error: linux/seccomp.h: No such file or directory samples/seccomp/dropper.c:20:27: fatal error: linux/seccomp.h: No such file or directory samples/seccomp/bpf-direct.c:21:27: fatal error: linux/seccomp.h: No such file or directory drivers/phy/tegra/xusb-tegra210.c:1721:3: error: label 'out' used but not defined arm.dove_defconfig: drivers/phy/phy-core.c:848:4: error: implicit declaration of function 'of_get_next_parent' [-Werror=implicit-function-declaration] Warnings: 1 buildall.powerpc.pasemi_defconfig.log.passed:<stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] 1 buildall.powerpc.pasemi_defconfig.log.passed:<stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] 1 buildall.powerpc.ppc64_defconfig.log.passed:<stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] 1 buildall.powerpc.ppc64_defconfig.log.passed:<stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] 1 drivers/isdn/hardware/eicon/platform.h:333:18: warning: array subscript is above array bounds [-Warray-bounds] 1 drivers/mtd/chips/cfi_cmdset_0020.c:651:1: warning: the frame size of 1040 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 drivers/net/ethernet/mellanox/mlx5/core/en_main.c:1304:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 drivers/phy/phy-core.c:848:11: warning: assignment makes pointer from integer without a cast 1 drivers/phy/tegra/xusb-tegra210.c:1741:1: warning: label 'free' defined but not used [-Wunused-label] 1 include/soc/nps/common.h:148:9: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 include/soc/nps/common.h:162:9: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 include/sound/control.h:219:2: warning: 'master_vol' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 lib/lz4/lz4hc_compress.c:514:1: warning: the frame size of 1480 bytes is larger than 1024 bytes [-Wframe-larger-than=] 2 drivers/pinctrl/sh-pfc/core.c:603:17: warning: unused variable 'pfc' [-Wunused-variable] 3 fs/xfs/xfs_aops.c:97:16: warning: unused variable 'blockmask' [-Wunused-variable] 4 drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] 5 drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] 7 include/linux/kernel.h:741:17: warning: comparison of distinct pointer types lacks a cast 16 include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] 72 drivers/regulator/core.c:2520) [-Wdeprecated-declarations] Section mismatches:

8 years, 8 months

next boot: 48 passed 33 failed (next/next-20160427)

by Olof's autobooter

Full logs are available at http://arm-soc.lixom.net/bootlogs/next/next-20160427/ Failed boards: arndale arm-multi_v7_nosmp_defconfig : FAILED 2:53.77 bbb arm-omap2plus_defconfig : FAILED 1:53.88 bbb arm-multi_v7_defconfig : FAILED 1:52.85 bbb arm-multi_v7_nosmp_defconfig : FAILED 2:08.17 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:45.91 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:46.53 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:46.42 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 1:55.54 beaver arm-tegra_defconfig : FAILED 1:47.72 beaver arm-multi_v7_defconfig : FAILED 1:46.96 beaver arm-multi_v7_nosmp_defconfig : FAILED 1:48.37 cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.24 cosmic arm-multi_v7_defconfig : FAILED 2:06.80 cosmic arm-multi_v7_nosmp_defconfig : FAILED 2:17.09 dalmore arm-tegra_defconfig : FAILED 1:54.64 dalmore arm-multi_v7_defconfig : FAILED 1:55.69 dalmore arm-multi_lpae_defconfig : FAILED 2:05.87 dalmore arm-multi_v7_nosmp_defconfig : FAILED 1:54.95 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:50.96 omap5uevm arm-omap2plus_defconfig : FAILED 2:05.09 omap5uevm arm-multi_v7_defconfig : FAILED 2:09.99 omap5uevm arm-multi_lpae_defconfig : FAILED 2:25.37 omap5uevm arm-multi_v7_nosmp_defconfig : FAILED 2:08.77 pi arm-multi_v7_defconfig : FAILED 1:58.11 pi arm-multi_lpae_defconfig : FAILED 2:06.97 seaboard arm-tegra_defconfig : FAILED 1:56.42 seaboard arm-multi_v7_defconfig : FAILED 2:07.43 seaboard arm-multi_v7_nosmp_defconfig : FAILED 1:50.66 snow arm-multi_v7_nosmp_defconfig : FAILED 0:47.69 snowball arm-u8500_defconfig : FAILED 1:56.62 snowball arm-multi_v7_defconfig : FAILED 2:21.02 snowball arm-multi_v7_nosmp_defconfig : FAILED 1:59.64 wandboard arm-imx_v6_v7_defconfig : FAILED 2:57.29 Successful boards: apc arm-vt8500_v6_v7_defconfig : passed 1:14.25 arndale arm-exynos_defconfig : passed 1:30.12 arndale arm-multi_v7_defconfig : passed 1:19.30 arndale arm-multi_lpae_defconfig : passed 1:29.13 capri arm-bcm_defconfig : passed 0:43.87 capri arm-multi_v7_defconfig : passed 1:08.34 capri arm-multi_v7_nosmp_defconfig : warnings 0:52.67 chitra powerpc-pasemi_defconfig : passed 1:58.68 chitra powerpc-ppc64_defconfig : passed 2:03.98 colombus arm-sunxi_defconfig : passed 1:03.48 colombus arm-multi_v7_defconfig : passed 1:34.75 colombus arm-multi_lpae_defconfig : passed 1:19.39 colombus arm-multi_v7_nosmp_defconfig : warnings 3:26.89 cubie arm-sunxi_defconfig : passed 1:00.74 cubie arm-multi_v7_defconfig : passed 0:51.02 cubie arm-multi_v7_nosmp_defconfig : passed 0:57.29 cubie2 arm-sunxi_defconfig : passed 0:41.74 cubie2 arm-multi_v7_defconfig : passed 0:49.16 cubie2 arm-multi_lpae_defconfig : passed 0:46.92 cubie2 arm-multi_v7_nosmp_defconfig : warnings 1:04.71 cubox arm-multi_v7_defconfig : passed 1:11.26 cubox arm-mvebu_v7_defconfig : passed 1:19.77 cubox arm-multi_v7_nosmp_defconfig : passed 1:00.99 hummingboard arm-imx_v6_v7_defconfig : passed 1:10.42 hummingboard arm-multi_v7_defconfig : passed 1:17.28 hummingboard arm-multi_v7_nosmp_defconfig : warnings 0:59.36 jetsontk1 arm-tegra_defconfig : warnings 0:50.71 jetsontk1 arm-multi_v7_defconfig : warnings 0:48.20 jetsontk1 arm-multi_lpae_defconfig : warnings 0:55.87 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:33.48 pandaes arm-omap2plus_defconfig : warnings 1:46.52 pandaes arm-multi_v7_defconfig : passed 1:45.03 pandaes arm-multi_v7_nosmp_defconfig : warnings 2:00.17 pi arm-exynos_defconfig : passed 2:12.51 pi arm-multi_v7_nosmp_defconfig : warnings 2:09.36 pit arm-exynos_defconfig : passed 2:13.11 pit arm-multi_v7_defconfig : passed 2:16.36 pit arm-multi_lpae_defconfig : passed 2:30.21 pit arm-multi_v7_nosmp_defconfig : warnings 2:09.22 seattle arm64-defconfig : passed 2:29.02 snow arm-exynos_defconfig : passed 2:05.59 snow arm-multi_v7_defconfig : passed 2:09.29 snow arm-multi_lpae_defconfig : passed 2:29.98 trimslice arm-tegra_defconfig : warnings 1:37.57 trimslice arm-multi_v7_defconfig : warnings 3:11.47 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:39.23 wandboard arm-multi_v7_defconfig : passed 0:56.09 wandboard arm-multi_v7_nosmp_defconfig : warnings 0:41.81 Offline boards: colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:18.43 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:19.67 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 1:25.48 parallella arm-multi_v7_defconfig : OFFLINE 2:41.93 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:12.34 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:55.45 rk3288evb arm-multi_lpae_defconfig : OFFLINE 1:01.58 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:48.38 sama5 arm-sama5_defconfig : OFFLINE 2:19.78 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:40.03 socfpga arm-socfpga_defconfig : OFFLINE 2:19.87 socfpga arm-multi_v7_defconfig : OFFLINE 2:21.71 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:13.89 Board legend is available at http://arm-soc.lixom.net/boards.html Board arndale-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- hdmi-en: disabling ahci 122f0000.sata: couldn't get PHY in node sata: -517 Booting Linux on physical CPU 0x0 [c103aed8] *pgd=4100041e(bad) Linux version 4.6.0-rc5-next-20160427 (build@brutus) (gcc version 4.9.2 (GCC) ) #1 Tue Apr 26 23:42:52 PDT 2016 CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c53c7d Modules linked in: CPU: div instructions available: patching division code CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Machine model: Insignal Arndale evaluation board based on EXYNOS5250 cma: Reserved 64 MiB at 0xbc000000 Memory policy: Data cache writeback Samsung CPU ID: 0x43520010 On node 0 totalpages: 520192 free_area_init_node: node 0, pgdat c10fc358, node_mem_map eeff8000 DMA zone: 1536 pages used for memmap DMA zone: 0 pages reserved DMA zone: 192512 pages, LIFO batch:31 HighMem zone: 327680 pages, LIFO batch:31 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at /home/build/work/batch/arch/arm/kernel/devtree.c:149 arm_dt_init_cpu_maps+0xd4/0x130 DT /cpu 2 nodes greater than max cores 1, capping them Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 4.6.0-rc5-next-20160427 #1 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [<c030e930>] (unwind_backtrace) from [<c030b49c>] (show_stack+0x10/0x14) [<c030b49c>] (show_stack) from [<c0335ec4>] (__warn+0xe4/0xfc) [<c0335ec4>] (__warn) from [<c0335f14>] (warn_slowpath_fmt+0x38/0x48) [<c0335f14>] (warn_slowpath_fmt) from [<c0f04138>] (arm_dt_init_cpu_maps+0xd4/0x130) [<c0f04138>] (arm_dt_init_cpu_maps) from [<c0f03424>] (setup_arch+0x7b8/0x978) [<c0f03424>] (setup_arch) from [<c0f00944>] (start_kernel+0x68/0x374) [<c0f00944>] (start_kernel) from [<40208078>] (0x40208078) ---[ end trace cb88537fdc8fa200 ]--- [PYBOOT] [arndale 02:51]: Timed out waiting for "<type 'str'>": [PYBOOT] [arndale 02:52]: got exception: timeout ~$off [PYBOOT] [arndale 02:53]: Done. Board bbb-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.559747] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.626201] Synopsys Designware Multimedia Card Interface Driver [ 1.634018] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.643895] ledtrig-cpu: registered to indicate activity on CPUs [ 1.651113] usbcore: registered new interface driver usbhid [ 1.657040] usbhid: USB HID core driver [ 1.668950] NET: Registered protocol family 10 [ 1.675474] sit: IPv6 over IPv4 tunneling driver [ 1.681598] NET: Registered protocol family 17 [ 1.686363] can: controller area network core (rev 20120528 abi 9) [ 1.693012] NET: Registered protocol family 29 [ 1.697724] can: raw protocol (rev 20120528) [ 1.702244] can: broadcast manager protocol (rev 20120528 t) [ 1.708241] can: netlink gateway (rev 20130117) max_hops=1 [ 1.715012] Key type dns_resolver registered [ 1.719876] omap_voltage_late_init: Voltage driver support not added [ 1.726836] ThumbEE CPU extension supported. [ 1.731389] Registering SWP/SWPB emulation handler [ 1.776339] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.782895] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.790641] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.799354] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.807293] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.815175] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.822985] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.830344] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.837388] hctosys: unable to open rtc device (rtc0) [ 1.850808] Waiting for root device /dev/mmcblk0p2... [ 1.856580] mmc1: new high speed MMC card at address 0001 [ 1.863371] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.868673] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.875341] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.883955] mmcblk1: p1 p2 [PYBOOT] [bbb 01:50]: Timed out waiting for "<type 'str'>": [PYBOOT] [bbb 01:51]: got exception: timeout ~$off [PYBOOT] [bbb 01:52]: Done. Board bbb-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman omap_hsmmc 48060000.mmc: Got CD GPIO Synopsys Designware Multimedia Card Interface Driver sdhci-pltfm: SDHCI platform and OF driver helper ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 Key type dns_resolver registered omap_voltage_late_init: Voltage driver support not added ThumbEE CPU extension supported. at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz hctosys: unable to open rtc device (rtc0) Waiting for root device /dev/mmcblk0p2... mmc1: new high speed MMC card at address 0001 mmcblk1: mmc1:0001 MMC02G 1.79 GiB mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB mmcblk1: p1 p2 [PYBOOT] [bbb 02:05]: Timed out waiting for "<type 'str'>": [PYBOOT] [bbb 02:06]: got exception: timeout ~$off [PYBOOT] [bbb 02:07]: Done. Board bbb-arm-omap2plus_defconfig failure log: ------------------------------------------------- [ 2.075029] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.081148] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.087475] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.094350] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.103942] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.113441] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.120455] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.163738] ledtrig-cpu: registered to indicate activity on CPUs [ 2.172435] oprofile: using arm/armv7 [ 2.177441] Initializing XFRM netlink socket [ 2.182569] NET: Registered protocol family 10 [ 2.193332] sit: IPv6 over IPv4 tunneling driver [ 2.202195] NET: Registered protocol family 17 [ 2.207128] NET: Registered protocol family 15 [ 2.212362] Key type dns_resolver registered [ 2.217207] omap_voltage_late_init: Voltage driver support not added [ 2.223947] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.232412] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.242025] ThumbEE CPU extension supported. [ 2.246654] Registering SWP/SWPB emulation handler [ 2.251674] SmartReflex Class3 initialized [ 2.325274] mmc1: new high speed MMC card at address 0001 [ 2.337381] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.344822] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.353106] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.360235] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.372419] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.379759] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.390621] hctosys: unable to open rtc device (rtc0) [ 2.396058] sr_init: No PMIC hook to init smartreflex [ 2.401739] sr_init: platform driver register failed for SR [ 2.446668] mmcblk1: p1 p2 [ 2.464920] Waiting for root device /dev/mmcblk0p2... [PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>": [PYBOOT] [bbb 01:52]: got exception: timeout ~$off [PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.185680] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 2.200459] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.207530] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.230241] rtc-ds1307 2-006f: SET TIME! [ 2.235959] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.242708] rtc-ds1307 2-006f: 64 bytes nvram [ 2.247319] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.255525] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.261303] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.269545] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.278705] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.285569] hub 1-0:1.0: USB hub found [ 2.289522] hub 1-0:1.0: 1 port detected [ 2.293924] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.299695] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.307804] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.316828] hub 2-0:1.0: USB hub found [ 2.320798] hub 2-0:1.0: 1 port detected [ 2.326902] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.391375] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.409609] aic_dvdd_fixed: disabling [ 2.414308] Waiting for root device /dev/mmcblk0p1... [ 2.441813] mmc1: new high speed MMC card at address 0001 [ 2.447843] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.452751] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.459108] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.466021] mmcblk1: p1 [ 2.599745] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.634775] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.659962] hub 2-1:1.0: USB hub found [ 2.663930] hub 2-1:1.0: 4 ports detected [ 2.755939] hub 1-1:1.0: USB hub found [ 2.759919] hub 1-1:1.0: 4 ports detected [PYBOOT] [beagleboard-x15 01:43]: Timed out waiting for "<type 'str'>": [PYBOOT] [beagleboard-x15 01:44]: got exception: timeout ~$off [PYBOOT] [beagleboard-x15 01:45]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.190614] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 2.205373] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.212441] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.235218] rtc-ds1307 2-006f: SET TIME! [ 2.240945] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.247678] rtc-ds1307 2-006f: 64 bytes nvram [ 2.252284] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.260487] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.266256] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.274485] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.283629] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.290496] hub 1-0:1.0: USB hub found [ 2.294442] hub 1-0:1.0: 1 port detected [ 2.298836] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.304607] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.312702] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.321720] hub 2-0:1.0: USB hub found [ 2.325683] hub 2-0:1.0: 1 port detected [ 2.331792] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.396349] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.414572] aic_dvdd_fixed: disabling [ 2.419262] Waiting for root device /dev/mmcblk0p1... [ 2.446785] mmc1: new high speed MMC card at address 0001 [ 2.452803] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.457698] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.464053] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.470964] mmcblk1: p1 [ 2.604725] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.639755] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.664887] hub 2-1:1.0: USB hub found [ 2.668852] hub 2-1:1.0: 4 ports detected [ 2.760837] hub 1-1:1.0: USB hub found [ 2.764821] hub 1-1:1.0: 4 ports detected [PYBOOT] [beagleboard-x15 01:43]: Timed out waiting for "<type 'str'>": [PYBOOT] [beagleboard-x15 01:44]: got exception: timeout ~$off [PYBOOT] [beagleboard-x15 01:45]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz rtc-ds1307 2-006f: SET TIME! rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 rtc-ds1307 2-006f: 64 bytes nvram omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz xhci-hcd xhci-hcd.0.auto: xHCI Host Controller xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected xhci-hcd xhci-hcd.0.auto: xHCI Host Controller xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected omap_hsmmc 4809c000.mmc: Got CD GPIO rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) aic_dvdd_fixed: disabling Waiting for root device /dev/mmcblk0p1... mmc1: new high speed MMC card at address 0001 mmcblk1: mmc1:0001 S10004 3.56 GiB mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB mmcblk1: p1 usb 1-1: new high-speed USB device number 2 using xhci-hcd usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd hub 2-1:1.0: USB hub found hub 2-1:1.0: 4 ports detected hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected [PYBOOT] [beagleboard-x15 01:52]: Timed out waiting for "<type 'str'>": [PYBOOT] [beagleboard-x15 01:53]: got exception: timeout ~$off [PYBOOT] [beagleboard-x15 01:54]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: ------------------------------------------------- [ 4.228111] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 4.234407] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.241299] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 4.251681] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 4.256541] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 4.262840] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.269698] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.279289] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.288782] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.295821] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.337329] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 4.343624] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 4.350493] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 4.360076] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 4.369564] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 4.376609] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 4.382729] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 4.389036] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 4.395877] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 4.405457] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 4.414950] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 4.421980] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 4.467538] hctosys: unable to open rtc device (rtc0) [ 4.472843] sr_init: No PMIC hook to init smartreflex [ 4.478395] sr_init: platform driver register failed for SR [ 4.525982] aic_dvdd_fixed: disabling [ 4.530210] ldousb: disabling [ 4.533460] mmc1: new high speed MMC card at address 0001 [ 4.541666] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 4.547225] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 4.554003] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 4.562524] mmcblk1: p1 [ 4.570134] Waiting for root device /dev/mmcblk0p1... [PYBOOT] [beagleboard-x15 01:43]: Timed out waiting for "<type 'str'>": [PYBOOT] [beagleboard-x15 01:44]: got exception: timeout ~$off [PYBOOT] [beagleboard-x15 01:45]: Done. Board beaver-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.293178] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.300135] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.306655] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 3.313514] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.319098] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.326195] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.336195] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.347032] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.353673] [drm] No driver support for vblank timestamp query. [ 3.359621] drm drm: No connectors reported connected with modes [ 3.365631] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.391755] Console: switching to colour frame buffer device 128x48 [ 3.403797] drm drm: fb0: frame buffer device [ 3.418843] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.429613] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.436078] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.441487] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.449318] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.463851] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.471095] hub 1-0:1.0: USB hub found [ 3.474868] hub 1-0:1.0: 1 port detected [ 3.479785] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.485196] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.492932] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.508855] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.516000] hub 2-0:1.0: USB hub found [ 3.519772] hub 2-0:1.0: 1 port detected [ 3.528209] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.541873] vdd_sata,avdd_plle: disabling [ 3.546283] usb1_vbus: disabling [ 3.550351] Waiting for root device /dev/mmcblk0p1... [ 3.833850] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.779284] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [PYBOOT] [beaver 01:44]: Timed out waiting for "<type 'str'>": [PYBOOT] [beaver 01:45]: got exception: timeout ~$off [PYBOOT] [beaver 01:46]: Done. Board beaver-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt pci 0000:01:00.0: Signaling PME through PCIe PME interrupt pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:01:00.0: enabling device (0140 -> 0143) r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] No driver support for vblank timestamp query. drm drm: No connectors reported connected with modes [drm] Cannot find any crtc or sizes - going 1024x768 Console: switching to colour frame buffer device 128x48 drm drm: fb0: frame buffer device [drm] Initialized tegra 0.0.0 20120330 on minor 0 utmi_phy_clk_enable: timeout waiting for phy to stabilize tegra-ehci 7d004000.usb: EHCI Host Controller tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected tegra-ehci 7d008000.usb: EHCI Host Controller tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) vdd_sata,avdd_plle: disabling usb1_vbus: disabling Waiting for root device /dev/mmcblk0p1... usb 2-1: new high-speed USB device number 2 using tegra-ehci asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [PYBOOT] [beaver 01:45]: Timed out waiting for "<type 'str'>": [PYBOOT] [beaver 01:46]: got exception: timeout ~$off [PYBOOT] [beaver 01:47]: Done. Board beaver-arm-tegra_defconfig failure log: ------------------------------------------------- [ 6.087037] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 6.093997] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.099602] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 6.107152] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 6.117154] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 6.130055] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.136692] [drm] No driver support for vblank timestamp query. [ 6.142688] drm drm: No connectors reported connected with modes [ 6.148712] [drm] Cannot find any crtc or sizes - going 1024x768 [ 6.174325] Console: switching to colour frame buffer device 128x48 [ 6.186122] drm drm: fb0: frame buffer device [ 6.213606] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 6.222890] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 6.229366] tegra-ehci 7d004000.usb: EHCI Host Controller [ 6.234798] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 6.242771] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 6.263605] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 6.271326] hub 1-0:1.0: USB hub found [ 6.275124] hub 1-0:1.0: 1 port detected [ 6.279941] tegra-ehci 7d008000.usb: EHCI Host Controller [ 6.285386] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 6.293255] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 6.313600] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 6.321187] hub 2-0:1.0: USB hub found [ 6.324974] hub 2-0:1.0: 1 port detected [ 6.333237] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 6.352045] vdd_sata,avdd_plle: disabling [ 6.356549] usb1_vbus: disabling [ 6.359959] ALSA device list: [ 6.362916] #0: NVIDIA Tegra Beaver [ 6.367152] Waiting for root device /dev/mmcblk0p1... [ 6.643605] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 7.629052] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [PYBOOT] [beaver 01:45]: Timed out waiting for "<type 'str'>": [PYBOOT] [beaver 01:46]: got exception: timeout ~$off [PYBOOT] [beaver 01:47]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: ------------------------------------------------- [ 14.638455] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.712486] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.722802] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.796886] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.807203] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.881235] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.891553] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.965639] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.975959] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 35.050016] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 35.060333] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 39.134421] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 39.144738] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.218816] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.229126] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.303151] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.313464] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.387541] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.397853] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.471885] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.482197] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.556284] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.566638] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.640668] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.650985] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.725067] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.735382] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.809459] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.819779] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.893816] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.904133] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.978213] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.988532] blk_update_request: I/O error, dev mmcblk0, sector 3633201 [PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>": [PYBOOT] [cosmic 01:59]: got exception: timeout ~$off [PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 14.057747] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.131727] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.141808] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.215783] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.225858] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.299832] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.309909] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.383894] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.393978] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.467965] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.478048] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.552060] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.562128] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.636110] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.646180] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.720160] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.730232] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.804211] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.814283] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.888262] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.898334] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.972312] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.982384] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.056363] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.066435] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.140411] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.150487] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.224462] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.234538] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.308518] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.318598] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.392582] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.402658] blk_update_request: I/O error, dev mmcblk0, sector 3633201 [PYBOOT] [cosmic 02:03]: Timed out waiting for "<type 'str'>": [PYBOOT] [cosmic 02:04]: got exception: timeout ~$off [PYBOOT] [cosmic 02:05]: Done. Board cosmic-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- blk_update_request: I/O error, dev mmcblk0, sector 3633185 mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633186 mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633187 mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633188 mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633189 mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633190 mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633191 mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633192 mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633193 mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633194 mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633195 mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633196 mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633197 mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633198 mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633199 mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633200 mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633201 [PYBOOT] [cosmic 02:14]: Timed out waiting for "<type 'str'>": [PYBOOT] [cosmic 02:15]: got exception: timeout ~$off [PYBOOT] [cosmic 02:16]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.785783] can: netlink gateway (rev 20130117) max_hops=1 [ 2.792733] Key type dns_resolver registered [ 2.799095] ThumbEE CPU extension supported. [ 2.803490] Registering SWP/SWPB emulation handler [ 2.826053] usb1_vbus: supplied by vdd-sys-5v0 [ 2.836461] usb2_vbus: supplied by vdd-sys-5v0 [ 2.853876] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.877340] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.884105] [drm] No driver support for vblank timestamp query. [ 2.890964] mmc1: new high speed MMC card at address 0001 [ 2.900253] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.906878] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.915344] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.923889] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.935567] mmcblk1: p1 [ 3.064775] Console: switching to colour frame buffer device 240x75 [ 3.152121] drm drm: fb0: frame buffer device [ 3.171631] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.186887] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.192477] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.201019] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.216607] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.227151] hub 1-0:1.0: USB hub found [ 3.231153] hub 1-0:1.0: 1 port detected [ 3.241865] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.256595] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.318653] dvdd_ts: disabling [ 3.321912] usb1_vbus: disabling [ 3.325173] vdd_cam_1v8_reg: disabling [ 3.332969] Waiting for root device /dev/mmcblk0p1... [ 3.541648] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.519228] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 64.762961] random: nonblocking pool is initialized [PYBOOT] [dalmore 02:03]: Timed out waiting for "<type 'str'>": [PYBOOT] [dalmore 02:04]: got exception: timeout ~$off [PYBOOT] [dalmore 02:05]: Done. Board dalmore-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.788446] can: netlink gateway (rev 20130117) max_hops=1 [ 2.795412] Key type dns_resolver registered [ 2.801865] ThumbEE CPU extension supported. [ 2.806254] Registering SWP/SWPB emulation handler [ 2.824370] usb1_vbus: supplied by vdd-sys-5v0 [ 2.834367] usb2_vbus: supplied by vdd-sys-5v0 [ 2.853230] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.874114] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.880873] [drm] No driver support for vblank timestamp query. [ 2.907455] mmc1: new high speed MMC card at address 0001 [ 2.917391] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.925464] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.935057] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.943614] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.953188] mmcblk1: p1 [ 3.058952] Console: switching to colour frame buffer device 240x75 [ 3.146444] drm drm: fb0: frame buffer device [ 3.166353] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.181530] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.187115] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.195952] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.211380] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.220714] hub 1-0:1.0: USB hub found [ 3.224750] hub 1-0:1.0: 1 port detected [ 3.235388] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.250323] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.313345] dvdd_ts: disabling [ 3.316568] usb1_vbus: disabling [ 3.319826] vdd_cam_1v8_reg: disabling [ 3.327326] Waiting for root device /dev/mmcblk0p1... [ 3.536386] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.520017] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 49.531344] random: nonblocking pool is initialized [PYBOOT] [dalmore 01:52]: Timed out waiting for "<type 'str'>": [PYBOOT] [dalmore 01:53]: got exception: timeout ~$off [PYBOOT] [dalmore 01:54]: Done. Board dalmore-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 Key type dns_resolver registered ThumbEE CPU extension supported. usb1_vbus: supplied by vdd-sys-5v0 usb2_vbus: supplied by vdd-sys-5v0 VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] No driver support for vblank timestamp query. Console: switching to colour frame buffer device 240x75 drm drm: fb0: frame buffer device [drm] Initialized tegra 0.0.0 20120330 on minor 0 tegra-ehci 7d008000.usb: EHCI Host Controller tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 mmc1: new high speed MMC card at address 0001 tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 mmcblk1: mmc1:0001 SEM32G 29.1 GiB mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 hub 1-0:1.0: USB hub found mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB hub 1-0:1.0: 1 port detected mmcblk1: p1 input: gpio-keys as /devices/soc0/gpio-keys/input/input0 palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) dvdd_ts: disabling usb1_vbus: disabling vdd_cam_1v8_reg: disabling Waiting for root device /dev/mmcblk0p1... usb 1-1: new high-speed USB device number 2 using tegra-ehci asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [PYBOOT] [dalmore 01:52]: Timed out waiting for "<type 'str'>": [PYBOOT] [dalmore 01:53]: got exception: timeout ~$off [PYBOOT] [dalmore 01:54]: Done. Board dalmore-arm-tegra_defconfig failure log: ------------------------------------------------- [ 5.465182] Bluetooth: RFCOMM socket layer initialized [ 5.470404] Bluetooth: RFCOMM ver 1.11 [ 5.474222] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.479707] Bluetooth: BNEP socket layer initialized [ 5.484761] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 5.490761] Bluetooth: HIDP socket layer initialized [ 5.497088] Key type dns_resolver registered [ 5.506577] Registering SWP/SWPB emulation handler [ 5.525257] usb1_vbus: supplied by vdd-sys-5v0 [ 5.534722] usb2_vbus: supplied by vdd-sys-5v0 [ 5.551616] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 5.580879] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 5.587684] [drm] No driver support for vblank timestamp query. [ 5.764575] Console: switching to colour frame buffer device 240x75 [ 5.851047] drm drm: fb0: frame buffer device [ 5.884816] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 5.893948] tegra-ehci 7d008000.usb: EHCI Host Controller [ 5.899806] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 5.908950] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 5.934860] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 5.948902] hub 1-0:1.0: USB hub found [ 5.952933] hub 1-0:1.0: 1 port detected [ 5.966823] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 5.980772] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 6.067828] dvdd_ts: disabling [ 6.070935] usb1_vbus: disabling [ 6.074200] vdd_cam_1v8_reg: disabling [ 6.078909] ALSA device list: [ 6.081902] #0: NVIDIA Tegra Dalmore [ 6.087802] Waiting for root device /dev/mmcblk0p1... [ 6.274856] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 7.309441] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 65.254819] random: nonblocking pool is initialized [PYBOOT] [dalmore 01:51]: Timed out waiting for "<type 'str'>": [PYBOOT] [dalmore 01:52]: got exception: timeout ~$off [PYBOOT] [dalmore 01:53]: Done. Board odroidu3-arm-exynos_defconfig failure log: ------------------------------------------------- [ 1.714688] Key type dns_resolver registered [ 1.720018] Registering SWP/SWPB emulation handler [ 1.728845] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.731591] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.738988] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.746161] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.752738] [drm] No driver support for vblank timestamp query. [ 1.758647] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.764977] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.770217] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.781682] usb 1-3: New USB device found, idVendor=0424, idProduct=3503 [ 1.782797] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.790887] hub 1-3:1.0: USB hub found [ 1.793792] hub 1-3:1.0: 3 ports detected [ 1.797696] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.801751] max98090 1-0010: MAX98090 REVID=0x43 [ 1.804010] max98090 1-0010: use default 2.8v micbias [ 1.817357] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.827070] mmc1: new DDR MMC card at address 0001 [ 1.830964] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.838465] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.843013] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.849365] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.855146] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.860960] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.867618] mmcblk1: p1 p2 [ 1.887384] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.908478] VDD10_HDMI_1.0V: disabling [ 1.909177] vdd_g3d: disabling [ 1.910244] BUCK8_2.8V: disabling [ 1.914d99] ALSA device list: [ 1.915867] #0: Odroid-U3 [ 1.919672] Waiting for root device /dev/mmcblk0p2... [PYBOOT] [odroidu3 01:48]: Timed out waiting for "<type 'str'>": [PYBOOT] [odroidu3 01:49]: got exception: timeout ~$off [PYBOOT] [odroidu3 01:50]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.857040] omap_vp_init: No PMIC info for vdd_mpu [ 1.862133] Power Management for TI OMAP4+ devices. [ 1.867356] ThumbEE CPU extension supported. [ 1.871850] Registering SWP/SWPB emulation handler [ 1.881955] palmas 0-0048: Irq flag is 0x00000000 [ 1.906277] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 1.916972] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.931747] smps6: Bringing 1350000uV into 1200000-1200000uV [ 1.941739] mmc0: new high speed MMC card at address 0001 [ 1.947740] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.952661] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.959006] smps9: Bringing 0uV into 2100000-2100000uV [ 1.964432] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.973452] ldo1: Bringing 0uV into 1500000-1500000uV [ 1.980099] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.988055] ldo4: Bringing 0uV into 1500000-1500000uV [ 1.999281] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.006923] smsc95xx v1.0.4 [ 2.010233] ldo9: failed to get the current voltage(-22) [ 2.015815] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.028890] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.039875] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.057925] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 16:9b:01:e4:f3:a1 [ 2.070434] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.076845] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.100400] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:02:37 UTC (946684957) [ 2.116151] pbias_mmc_omap5: disabling [ 2.120105] vmmcsdio_fixed: disabling [ 2.124656] Waiting for root device /dev/mmcblk1p2... [ 2.298548] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.434352] hub 1-2:1.0: USB hub found [ 2.438369] hub 1-2:1.0: 3 ports detected [ 2.444247] omap-dwc3 4a020000.omap_dwc3: vbus init failed [PYBOOT] [omap5uevm 02:22]: Timed out waiting for "<type 'str'>": [PYBOOT] [omap5uevm 02:23]: got exception: timeout ~$off [PYBOOT] [omap5uevm 02:24]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.856938] omap_vp_init: No PMIC info for vdd_mpu [ 1.862033] Power Management for TI OMAP4+ devices. [ 1.867265] ThumbEE CPU extension supported. [ 1.871760] Registering SWP/SWPB emulation handler [ 1.881891] palmas 0-0048: Irq flag is 0x00000000 [ 1.906255] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 1.917102] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.931803] smps6: Bringing 1350000uV into 1200000-1200000uV [ 1.941869] mmc0: new high speed MMC card at address 0001 [ 1.947900] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.952680] smps9: Bringing 0uV into 2100000-2100000uV [ 1.958204] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.964560] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.973317] ldo1: Bringing 0uV into 1500000-1500000uV [ 1.979952] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.987931] ldo4: Bringing 0uV into 1500000-1500000uV [ 1.999152] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.006848] smsc95xx v1.0.4 [ 2.010151] ldo9: failed to get the current voltage(-22) [ 2.015740] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.028817] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.039864] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.057838] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 42:b2:b8:0a:e7:52 [ 2.070416] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.076838] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.100388] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.116116] pbias_mmc_omap5: disabling [ 2.120067] vmmcsdio_fixed: disabling [ 2.124618] Waiting for root device /dev/mmcblk1p2... [ 2.298508] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.434391] hub 1-2:1.0: USB hub found [ 2.438408] hub 1-2:1.0: 3 ports detected [ 2.444340] omap-dwc3 4a020000.omap_dwc3: vbus init failed [PYBOOT] [omap5uevm 02:07]: Timed out waiting for "<type 'str'>": [PYBOOT] [omap5uevm 02:08]: got exception: timeout ~$off [PYBOOT] [omap5uevm 02:09]: Done. Board omap5uevm-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- Power Management for TI OMAP4+ devices. ThumbEE CPU extension supported. usb 1-3: new high-speed USB device number 2 using ehci-omap palmas 0-0048: Irq flag is 0x00000000 palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 smps6: Bringing 1350000uV into 1200000-1200000uV smps9: Bringing 0uV into 2100000-2100000uV mmc0: new high speed MMC card at address 0001 mmcblk0: mmc0:0001 SEM04G 3.69 GiB mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB ldo1: Bringing 0uV into 1500000-1500000uV ldo2: Bringing 0uV into 2800000-2800000uV ldo4: Bringing 0uV into 1500000-1500000uV ldo7: Bringing 0uV into 2000000-2000000uV ldo9: failed to get the current voltage(-22) palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz smsc95xx v1.0.4 omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz omap-dwc3 4a020000.omap_dwc3: vbus init failed palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:04:57 UTC (946685097) pbias_mmc_omap5: disabling vmmcsdio_fixed: disabling smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, fa:16:01:5a:25:08 omap-dwc3 4a020000.omap_dwc3: vbus init failed Waiting for root device /dev/mmcblk1p2... usb 1-2: new high-speed USB device number 3 using ehci-omap hub 1-2:1.0: USB hub found hub 1-2:1.0: 3 ports detected omap-dwc3 4a020000.omap_dwc3: vbus init failed [PYBOOT] [omap5uevm 02:06]: Timed out waiting for "<type 'str'>": [PYBOOT] [omap5uevm 02:07]: got exception: timeout ~$off [PYBOOT] [omap5uevm 02:08]: Done. Board omap5uevm-arm-omap2plus_defconfig failure log: ------------------------------------------------- [ 3.893762] ldo1: Bringing 0uV into 1500000-1500000uV [ 3.901760] ldo2: Bringing 0uV into 2800000-2800000uV [ 3.912019] ldo4: Bringing 0uV into 1500000-1500000uV [ 3.926726] ldo7: Bringing 0uV into 2000000-2000000uV [ 3.937229] ldo9: failed to get the current voltage(-22) [ 3.942821] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 3.962866] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 3.974456] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 3.982020] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 3.988602] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 3.994892] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.001751] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.011339] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.020834] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.027890] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 4.034002] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 4.040306] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.047142] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.056722] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.066221] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.073258] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.118221] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 4.124515] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 4.131383] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 4.140970] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 4.150460] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 4.157501] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 4.165334] hctosys: unable to open rtc device (rtc0) [ 4.170661] sr_init: No PMIC hook to init smartreflex [ 4.176138] sr_init: platform driver register failed for SR [ 4.204747] pbias_mmc_omap5: disabling [ 4.208712] vmmcsdio_fixed: disabling [ 4.214724] Waiting for root device /dev/mmcblk1p2... [PYBOOT] [omap5uevm 02:02]: Timed out waiting for "<type 'str'>": [PYBOOT] [omap5uevm 02:03]: got exception: timeout ~$off [PYBOOT] [omap5uevm 02:04]: Done. Board pi-arm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.517510] isl29018 7-0044: No cache defaults, reading back from HW [ 1.523865] isl29018 7-0044: Failed to read 1: -6 [ 1.528449] isl29018 7-0044: regmap initialization fails: -6 [ 1.538842] NET: Registered protocol family 10 [ 1.543275] sit: IPv6 over IPv4 tunneling driver [ 1.546857] NET: Registered protocol family 17 [ 1.550861] can: controller area network core (rev 20120528 abi 9) [ 1.557052] NET: Registered protocol family 29 [ 1.561439] can: raw protocol (rev 20120528) [ 1.565689] can: broadcast manager protocol (rev 20120528 t) [ 1.571330] can: netlink gateway (rev 20130117) max_hops=1 [ 1.577046] Key type dns_resolver registered [ 1.581375] ThumbEE CPU extension supported. [ 1.585280] Registering SWP/SWPB emulation handler [ 1.595143] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.600633] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.606992] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.612367] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.622439] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.632798] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.638237] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.648428] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.654608] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.659986] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.669706] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.691977] Waiting for root device /dev/mmcblk0p1... [ 1.695857] mmc0: tuning execution failed: -5 [ 1.699888] mmc0: error -5 whilst initialising MMC card [ 2.567557] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.581678] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.587139] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.593511] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.598895] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [PYBOOT] [pi 02:04]: Timed out waiting for "<type 'str'>": [PYBOOT] [pi 02:05]: got exception: timeout ~$off [PYBOOT] [pi 02:06]: Done. Board pi-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.517487] isl29018 7-0044: No cache defaults, reading back from HW [ 1.523842] isl29018 7-0044: Failed to read 1: -6 [ 1.528427] isl29018 7-0044: regmap initialization fails: -6 [ 1.538824] NET: Registered protocol family 10 [ 1.543254] sit: IPv6 over IPv4 tunneling driver [ 1.546836] NET: Registered protocol family 17 [ 1.550838] can: controller area network core (rev 20120528 abi 9) [ 1.557028] NET: Registered protocol family 29 [ 1.561416] can: raw protocol (rev 20120528) [ 1.565665] can: broadcast manager protocol (rev 20120528 t) [ 1.571307] can: netlink gateway (rev 20130117) max_hops=1 [ 1.577032] Key type dns_resolver registered [ 1.581355] ThumbEE CPU extension supported. [ 1.585256] Registering SWP/SWPB emulation handler [ 1.595144] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.600625] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.606987] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.612361] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.622430] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.632769] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.638215] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.648401] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.654585] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.659963] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.669683] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.691960] Waiting for root device /dev/mmcblk0p1... [ 1.695840] mmc0: tuning execution failed: -5 [ 1.699873] mmc0: error -5 whilst initialising MMC card [ 2.567547] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.581668] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.587124] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.593497] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.598881] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [PYBOOT] [pi 01:55]: Timed out waiting for "<type 'str'>": [PYBOOT] [pi 01:56]: got exception: timeout ~$off [PYBOOT] [pi 01:57]: Done. Board seaboard-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.911312] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.922487] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.928967] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.934406] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.942908] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.956640] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.963397] hub 3-0:1.0: USB hub found [ 1.967202] hub 3-0:1.0: 1 port detected [ 1.975237] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.981908] [drm] No driver support for vblank timestamp query. [ 2.006897] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 2.020434] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 2.023259] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 2.030399] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 2.066308] mmc2: switch to bus width 8 failed [ 2.066577] mmc2: switch to bus width 4 failed [ 2.066599] mmc2: new high speed MMC card at address 0001 [ 2.067077] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 2.067274] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 2.067454] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 2.068711] mmcblk2: p3 [ 2.071452] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 2.076262] mmc0: new SDIO card at address 0001 [ 2.083360] Console: switching to colour frame buffer device 170x48 [ 2.163687] drm drm: fb0: frame buffer device [ 2.181634] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.188234] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 2.195206] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.208587] vdd_1v5: disabling [ 2.211663] vdd_1v2: disabling [ 2.764824] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.776225] Waiting for root device /dev/mmcblk0p3... [ 58.389379] random: nonblocking pool is initialized [PYBOOT] [seaboard 02:04]: Timed out waiting for "<type 'str'>": [PYBOOT] [seaboard 02:05]: got exception: timeout ~$off [PYBOOT] [seaboard 02:06]: Done. Board seaboard-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- VDDIO_HDMI: supplied by vdd_5v0 tegra-dc 54200000.dc: failed to probe RGB output: -517 utmi_phy_clk_enable: timeout waiting for phy to stabilize tegra-ehci c5000000.usb: EHCI Host Controller tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 hub 3-0:1.0: USB hub found hub 3-0:1.0: 1 port detected [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] No driver support for vblank timestamp query. mmc2: switch to bus width 8 failed mmc2: switch to bus width 4 failed mmc2: new high speed MMC card at address 0001 mmcblk2: mmc2:0001 MMC08G 7.46 GiB mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB mmcblk2: p3 mmc0: queuing unknown CIS tuple 0x80 (50 bytes) mmc0: queuing unknown CIS tuple 0x80 (7 bytes) mmc0: queuing unknown CIS tuple 0x80 (7 bytes) mmc0: queuing unknown CIS tuple 0x80 (19 bytes) Console: switching to colour frame buffer device 170x48 drm drm: fb0: frame buffer device [drm] Initialized tegra 0.0.0 20120330 on minor 0 input: gpio-keys as /devices/soc0/gpio-keys/input/input2 tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) vdd_1v5: disabling vdd_1v2: disabling mmc0: queuing unknown CIS tuple 0x02 (1 bytes) mmc0: new SDIO card at address 0001 asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 Waiting for root device /dev/mmcblk0p3... [PYBOOT] [seaboard 01:47]: Timed out waiting for "<type 'str'>": [PYBOOT] [seaboard 01:48]: got exception: timeout ~$off [PYBOOT] [seaboard 01:50]: Done. Board seaboard-arm-tegra_defconfig failure log: ------------------------------------------------- [ 4.454698] can: raw protocol (rev 20120528) [ 4.458965] can: broadcast manager protocol (rev 20120528 t) [ 4.464695] can: netlink gateway (rev 20130117) max_hops=1 [ 4.500314] Bluetooth: RFCOMM socket layer initialized [ 4.505503] Bluetooth: RFCOMM ver 1.11 [ 4.509288] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.514718] Bluetooth: BNEP socket layer initialized [ 4.519689] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.525699] Bluetooth: HIDP socket layer initialized [ 4.531749] Key type dns_resolver registered [ 4.538195] Registering SWP/SWPB emulation handler [ 4.560189] VDDIO_HDMI: supplied by vdd_5v0 [ 4.567115] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 4.581361] tegra-ehci c5000000.usb: EHCI Host Controller [ 4.586884] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 4.595393] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 4.620002] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 4.631641] hub 3-0:1.0: USB hub found [ 4.635518] hub 3-0:1.0: 1 port detected [ 4.654418] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.661085] [drm] No driver support for vblank timestamp query. [ 4.723231] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 4.770678] Console: switching to colour frame buffer device 170x48 [ 4.819041] drm drm: fb0: frame buffer device [ 4.849934] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 4.857107] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 4.886778] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:01 UTC (1230768001) [ 4.906248] vdd_1v5: disabling [ 4.909301] vdd_1v2: disabling [ 4.912469] ALSA device list: [ 4.915429] #0: NVIDIA Tegra Seaboard [ 4.919974] Waiting for root device /dev/mmcblk0p3... [ 61.665947] random: nonblocking pool is initialized [PYBOOT] [seaboard 01:53]: Timed out waiting for "<type 'str'>": [PYBOOT] [seaboard 01:54]: got exception: timeout ~$off [PYBOOT] [seaboard 01:55]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- snow login: root root Password: root Unable to handle kernel paging request at virtual address ee770000 pgd = c0204000 [ee770000] *pgd=6e60041e(bad) Internal error: Oops: 8000000d [#1] ARM Modules linked in: CPU: 0 PID: 0 Comm: swapper Tainted: G W 4.6.0-rc5-next-20160427 #1 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) task: c1005f30 ti: c1000000 task.ti: c1000000 PC is at 0xee770000 LR is at cpu_init+0x14/0x54 pc : [<ee770000>] lr : [<c0309fa0>] psr: 000001d3 sp : c1001f50 ip : 00000000 fp : 00000000 r10: c1035b18 r9 : c1005f30 r8 : 676af4b2 r7 : 00000001 r6 : c10b4100 r5 : ee770000 r4 : c1136b8c r3 : c030d820 r2 : 00cf9974 r1 : 6e07c059 r0 : 00000000 Flags: nzcv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none Control: 10c53c7d Table: 6e07c059 DAC: 00000051 Process swapper (pid: 0, stack limit = 0xc1000218) Stack: (0xc1001f50 to 0xc1002000) 1f40: c10fdfd5 c034e090 00000000 c1035b18 1f60: c100615c c030c590 c1039780 63bee1ae 00000001 c10fdfd5 c10fdfd5 c1000000 1f80: c100212c c10b35a0 c1002134 c10fdfd5 c1001fa4 c0a962a4 ffffffff c1000000 1fa0: c1001fac c0a964a4 c10b4060 c0357edc 00000001 ffffffff 00000000 c0f00c44 1fc0: ffffffff ffffffff 00000000 c0f0068c 00000000 c0f8ba20 c11001d4 c10020b4 1fe0: c0f8ba1c c10070f8 40204059 410fc0f4 00000000 40208078 00000000 00000000 [<c0309fa0>] (cpu_init) from [<c034e090>] (atomic_notifier_call_chain+0x18/0x20) [<c034e090>] (atomic_notifier_call_chain) from [<c030c590>] (__switch_to+0x34/0x64) Code: 00000000 00000000 00000000 00000000 (ed41f738) ---[ end trace cb88537fdc8fa202 ]--- Kernel panic - not syncing: Attempted to kill the idle task! ---[ end Kernel panic - not syncing: Attempted to kill the idle task! [PYBOOT] [snow 00:46]: got exception: panic ~$off [PYBOOT] [snow 00:47]: Done. Board snowball-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.974792] can: controller area network core (rev 20120528 abi 9) [ 1.981109] NET: Registered protocol family 29 [ 1.985595] can: raw protocol (rev 20120528) [ 1.989868] can: broadcast manager protocol (rev 20120528 t) [ 1.995574] can: netlink gateway (rev 20130117) max_hops=1 [ 2.001892] Key type dns_resolver registered [ 2.006530] ThumbEE CPU extension supported. [ 2.010833] Registering SWP/SWPB emulation handler [ 2.023193] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.030395] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.039916] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.046966] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.054016] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.061035] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.078247] db8500-esram12: disabling [ 2.082061] db8500-esram34: disabling [ 2.086242] V-CSI/DSI: disabling [ 2.089630] mmci-reg: disabling [ 2.094635] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.100677] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.109313] Waiting for root device /dev/mmcblk0p4... [ 2.148925] mmc3: new high speed MMC card at address 0001 [ 2.155273] mmcblk3: mmc3:0001 3.53 GiB [ 2.159729] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.165496] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.171295] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.178192] mmcblk3: p1 p2 p3 p4 cu: Got hangup signal Connected. cu: waitpid: No child processes Connected. Disconnected. [PYBOOT] [snowball 02:18]: Timed out waiting for "<type 'str'>": [PYBOOT] [snowball 02:19]: got exception: timeout ~$off [PYBOOT] [snowball 02:20]: Done. Board snowball-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- sdhci-pltfm: SDHCI platform and OF driver helper ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 Key type dns_resolver registered ThumbEE CPU extension supported. input: gpio_keys as /devices/soc0/gpio_keys/input/input0 rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 db8500-esram12: disabling db8500-esram34: disabling V-CSI/DSI: disabling mmci-reg: disabling uart-pl011 80007000.uart: DMA channel TX dma0chan20 uart-pl011 80007000.uart: DMA channel RX dma0chan21 Waiting for root device /dev/mmcblk0p4... mmc3: new high speed MMC card at address 0001 mmcblk3: mmc3:0001 3.53 GiB mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB mmcblk3rpmb: mmc3:0001 partition 3 128 KiB mmcblk3: p1 p2 p3 p4 [PYBOOT] [snowball 01:56]: Timed out waiting for "<type 'str'>": [PYBOOT] [snowball 01:57]: got exception: timeout ~$off [PYBOOT] [snowball 01:59]: Done. Board snowball-arm-u8500_defconfig failure log: ------------------------------------------------- [ 2.692016] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.699676] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.733459] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.744476] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.759948] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.770996] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.807708] NET: Registered protocol family 10 [ 2.815490] sit: IPv6 over IPv4 tunneling driver [ 2.823059] NET: Registered protocol family 17 [ 2.827636] NET: Registered protocol family 35 [ 2.832763] NET: Registered protocol family 37 [ 2.837524] Registering SWP/SWPB emulation handler [ 2.857025] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.869506] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-08 03:50:07 UTC (955165807) [ 2.878936] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.885986] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.893005] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.899993] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.914520] db8500-esram12: disabling [ 2.918243] db8500-esram34: disabling [ 2.922241] V-CSI/DSI: disabling [ 2.925506] mmci-reg: disabling [ 2.928802] ALSA device list: [ 2.931823] #0: MOP500-card [ 2.935150] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.941131] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.947357] Waiting for root device /dev/mmcblk0p4... Connected. cu: Got hangup signal cu: waitpid: No child processes Connected. Disconnected. [PYBOOT] [snowball 01:53]: Timed out waiting for "<type 'str'>": [PYBOOT] [snowball 01:54]: got exception: timeout ~$off [PYBOOT] [snowball 01:55]: Done. Board wandboard-arm-imx_v6_v7_defconfig failure log: ------------------------------------------------- [ 20.173000] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" Id "S1" respawning too fast: disabled for 5 minutes INIT: Id "2" respawning too fast: disabled for 5 minutes INIT: Id "5" respawning too fast: disabled for 5 minutes [ 20.253469] mmcblk0: error -110 sending status command, retrying [ 20.261946] mmcblk0: error -110 sending status command, retrying [ 20.270425] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/gett[ 20.281803] mmcblk0: error -110 sending status command, retrying y" INIT: Id "1" respawning too[ 20.290486] mmcblk0: error -110 sending status command, retrying fast: disabled for 5 minutes [ 20.299358] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty"[ 20.311038] mmcblk0: error -110 sending status command, retrying INIT: Id "3" respawning too fast[ 20.321907] mmcblk0: error -110 sending status command, retrying : disabled for 5 minutes [ 20.333147] mmcblk0: error -110 sending status command, aborting [ 20.344364] mmcblk0: error -110 sending status command, retrying [ 20.352846] mmcblk0: error -110 sending status command, retrying [ 20.361318] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" INIT: Id "4" respawning too fast: disabled for 5 minutes INIT: Id "6" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 47.475005] random: nonblocking pool is initialized [PYBOOT] [wandboard 02:54]: Timed out waiting for "<type 'str'>": [PYBOOT] [wandboard 02:55]: got exception: timeout ~$off [PYBOOT] [wandboard 02:56]: Done.

8 years, 8 months

mainline boot: 236 boots: 7 failed, 221 passed with 8 offline (v4.6-rc5-69-gf28f20da704d)

by kernelci.org bot

mainline boot: 236 boots: 7 failed, 221 passed with 8 offline (v4.6-rc5-69-gf28f20da704d) Full Boot Summary: https://kernelci.org/boot/all/job/mainline/kernel/v4.6-rc5-69-gf28f20da704d/ Full Build Summary: https://kernelci.org/build/mainline/kernel/v4.6-rc5-69-gf28f20da704d/ Tree: mainline Branch: local/master Git Describe: v4.6-rc5-69-gf28f20da704d Git Commit: f28f20da704d399fb1e4d8838ffd697a357d9cc8 Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git Tested: 45 unique boards, 13 SoC families, 30 builds out of 140 Boot Failures Detected: https://kernelci.org/boot/?v4.6-rc5-69-gf28f20da704d&fail arm: multi_v7_defconfig+CONFIG_EFI=y: imx53-qsrb: 1 failed lab imx6dl-riotboard: 1 failed lab socfpga_cyclone5_socrates: 1 failed lab at91_dt_defconfig: at91sam9x25ek: 1 failed lab multi_v7_defconfig+CONFIG_SMP=n: armada-xp-openblocks-ax3-4: 1 failed lab multi_v7_defconfig+CONFIG_THUMB2_KERNEL=y+CONFIG_ARM_MODULE_PLTS=y: socfpga_cyclone5_socrates: 1 failed lab multi_v5_defconfig: imx27-phytec-phycard-s-rdk: 1 failed lab Offline Platforms: arm: multi_v7_defconfig+CONFIG_EFI=y: hip04-d01: 1 offline lab qcom-apq8064-ifc6410: 1 offline lab multi_v7_defconfig+CONFIG_EFI=y+CONFIG_ARM_LPAE=y: hip04-d01: 1 offline lab multi_v7_defconfig+CONFIG_PROVE_LOCKING=y: qcom-apq8064-ifc6410: 1 offline lab multi_v7_defconfig+CONFIG_SMP=n: qcom-apq8064-ifc6410: 1 offline lab qcom_defconfig: qcom-apq8064-ifc6410: 1 offline lab multi_v7_defconfig+CONFIG_LKDTM=y: qcom-apq8064-ifc6410: 1 offline lab multi_v7_defconfig: qcom-apq8064-ifc6410: 1 offline lab --- For more info write to <info(a)kernelci.org>

8 years, 8 months

← Newer
1
...
6
7
8
9
10
11
12
...
51
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports April 2016