Kernel-build-reports June 2016

kernel-build-reports@lists.linaro.org

16 participants
398 discussions

mainline build: 16 warnings 1 failures (mainline/v4.7-rc2-325-g45b00c9)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 45b00c9 Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v4.7-rc2-325-g45b00c9/ Runtime: 33m 6s Passed: 119 Failed: 1 Warnings: 16 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: arm64.allmodconfig ------------------------------------------------------------------------------- Errors: arm64.allmodconfig: /work/build/batch/samples/seccomp/bpf-fancy.c:13:27: fatal error: linux/seccomp.h: No such file or directory /work/build/batch/samples/seccomp/bpf-helper.h:20:50: fatal error: linux/seccomp.h: No such file or directory /work/build/batch/samples/seccomp/dropper.c:20:27: fatal error: linux/seccomp.h: No such file or directory /work/build/batch/samples/seccomp/bpf-direct.c:21:27: fatal error: linux/seccomp.h: No such file or directory Warnings: 1 drivers/block/floppy.c:1777:44: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:1779:44: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:4487:45: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:4495:45: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:810:44: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:825:43: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:826:43: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/infiniband/core/cma.c:1253:12: warning: 'src_addr_storage.sin_addr.s_addr' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 drivers/phy/phy-exynos-mipi-video.c:238:13: warning: 'val' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 drivers/staging/iio/adc/ad7606_spi.c:24:18: warning: 'data' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 fs/reiserfs/ibalance.c:1156:2: warning: 'new_insert_key' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 include/sound/control.h:219:9: warning: 'master_vol' may be used uninitialized in this function [-Wmaybe-uninitialized] 2 drivers/net/wireless/intel/iwlegacy/3945.c:1022:5: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses] 2 drivers/xen/balloon.c:154:13: warning: 'release_memory_resource' declared 'static' but never defined [-Wunused-function] Section mismatches:

8 years

mainline boot: 48 passed 9 failed (mainline/v4.7-rc2-325-g45b00c9)

by Olof's autobooter

Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.7-rc2-325-g45b00c9/ Failed boards: arndale multi_v7_nosmp_defconfig : NO BUILD bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver arm-tegra_defconfig : FAILED 1:52.61 beaver arm-multi_v7_defconfig : FAILED 2:00.97 beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:50.42 omap5uevm arm-omap2plus_defconfig : FAILED 2:10.43 omap5uevm arm-multi_v7_defconfig : FAILED 2:06.80 omap5uevm arm-multi_lpae_defconfig : FAILED 2:10.03 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-exynos_defconfig : FAILED 0:29.24 pi arm-multi_v7_defconfig : FAILED 1:50.97 pi arm-multi_lpae_defconfig : FAILED 2:14.28 pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard multi_v7_nosmp_defconfig : NO BUILD Successful boards: apc arm-vt8500_v6_v7_defconfig : passed 1:13.74 arndale arm-exynos_defconfig : passed 1:50.40 arndale arm-multi_v7_defconfig : passed 1:25.37 arndale arm-multi_lpae_defconfig : passed 1:24.17 bbb arm-omap2plus_defconfig : passed 1:39.48 bbb arm-multi_v7_defconfig : passed 1:15.60 beagleboard-x15 arm-omap2plus_defconfig : warnings 0:56.25 beagleboard-x15 arm-multi_v7_defconfig : warnings 0:59.29 beagleboard-x15 arm-multi_lpae_defconfig : warnings 0:59.40 capri arm-bcm_defconfig : passed 0:56.39 capri arm-multi_v7_defconfig : passed 0:52.41 chitra powerpc-pasemi_defconfig : passed 2:09.42 chitra powerpc-ppc64_defconfig : passed 2:02.06 colombus arm-sunxi_defconfig : passed 2:31.89 colombus arm-multi_v7_defconfig : passed 2:44.89 colombus arm-multi_lpae_defconfig : passed 2:37.30 cosmic arm-imx_v6_v7_defconfig : passed 3:20.49 cosmic arm-multi_v7_defconfig : passed 2:59.78 cubie arm-sunxi_defconfig : passed 0:51.98 cubie arm-multi_v7_defconfig : passed 0:46.68 cubie2 arm-sunxi_defconfig : passed 0:58.00 cubie2 arm-multi_v7_defconfig : passed 1:00.41 cubie2 arm-multi_lpae_defconfig : passed 1:02.93 cubox arm-multi_v7_defconfig : passed 1:06.30 cubox arm-mvebu_v7_defconfig : passed 1:18.48 dalmore arm-tegra_defconfig : warnings 1:30.12 dalmore arm-multi_v7_defconfig : warnings 1:25.12 dalmore arm-multi_lpae_defconfig : warnings 1:34.57 jetsontk1 arm-tegra_defconfig : warnings 0:52.09 jetsontk1 arm-multi_v7_defconfig : warnings 0:52.65 jetsontk1 arm-multi_lpae_defconfig : warnings 1:02.28 pandaes arm-omap2plus_defconfig : warnings 1:38.38 pandaes arm-multi_v7_defconfig : passed 1:50.03 parallella arm-multi_v7_defconfig : passed 3:04.23 pit arm-exynos_defconfig : passed 2:10.63 pit arm-multi_v7_defconfig : passed 2:18.65 pit arm-multi_lpae_defconfig : passed 2:23.25 seaboard arm-tegra_defconfig : warnings 1:02.55 seaboard arm-multi_v7_defconfig : warnings 1:03.46 seattle arm64-defconfig : passed 2:15.98 snow arm-exynos_defconfig : passed 2:06.58 snow arm-multi_v7_defconfig : passed 2:01.04 snow arm-multi_lpae_defconfig : passed 2:01.30 snowball arm-multi_v7_defconfig : passed 1:23.91 trimslice arm-tegra_defconfig : warnings 2:49.88 trimslice arm-multi_v7_defconfig : warnings 2:36.86 wandboard arm-imx_v6_v7_defconfig : passed 1:20.66 wandboard arm-multi_v7_defconfig : passed 1:15.76 Offline boards: colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:20.99 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:20.83 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 2:34.70 hummingboard arm-multi_v7_defconfig : OFFLINE 2:12.38 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:51.65 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:47.43 sama5 arm-sama5_defconfig : OFFLINE 2:21.62 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:19.23 snowball arm-u8500_defconfig : OFFLINE 1:16.80 socfpga arm-socfpga_defconfig : OFFLINE 2:18.29 socfpga arm-multi_v7_defconfig : OFFLINE 2:13.61 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board beaver-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.408101] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.415059] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.421579] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.428524] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.434108] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.441135] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.451134] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.462327] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.468949] [drm] No driver support for vblank timestamp query. [ 3.474890] drm drm: No connectors reported connected with modes [ 3.480902] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.506258] Console: switching to colour frame buffer device 128x48 [ 3.518435] drm drm: fb0: frame buffer device [ 3.533386] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.544205] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.550671] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.556080] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.563919] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.578398] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.585147] hub 1-0:1.0: USB hub found [ 3.588919] hub 1-0:1.0: 1 port detected [ 3.593835] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.599252] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.606993] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.618392] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.625057] hub 2-0:1.0: USB hub found [ 3.628824] hub 2-0:1.0: 1 port detected [ 3.637682] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.651364] vdd_sata,avdd_plle: disabling [ 3.656081] usb1_vbus: disabling [ 3.660180] Waiting for root device /dev/mmcblk0p1... [ 3.938398] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.876985] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [PYBOOT] [beaver 01:57]: Timed out waiting for "<type 'str'>": [PYBOOT] [beaver 01:58]: got exception: timeout ~$off [PYBOOT] [beaver 01:59]: Done. ======================================================================== Board beaver-arm-tegra_defconfig failure log: ------------------------------------------------- [ 6.454208] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 6.461249] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.466850] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 6.474369] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 6.484369] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 6.497285] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.503926] [drm] No driver support for vblank timestamp query. [ 6.509932] drm drm: No connectors reported connected with modes [ 6.515958] [drm] Cannot find any crtc or sizes - going 1024x768 [ 6.542989] Console: switching to colour frame buffer device 128x48 [ 6.554794] drm drm: fb0: frame buffer device [ 6.581087] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 6.590371] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 6.596844] tegra-ehci 7d004000.usb: EHCI Host Controller [ 6.602275] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 6.610250] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 6.631084] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 6.638986] hub 1-0:1.0: USB hub found [ 6.642782] hub 1-0:1.0: 1 port detected [ 6.647585] tegra-ehci 7d008000.usb: EHCI Host Controller [ 6.653027] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 6.660918] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 6.681076] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 6.688862] hub 2-0:1.0: USB hub found [ 6.692650] hub 2-0:1.0: 1 port detected [ 6.701031] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 6.719200] vdd_sata,avdd_plle: disabling [ 6.723998] usb1_vbus: disabling [ 6.727408] ALSA device list: [ 6.730365] #0: NVIDIA Tegra Beaver [ 6.734622] Waiting for root device /dev/mmcblk0p1... [ 7.011082] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 8.011332] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [PYBOOT] [beaver 01:49]: Timed out waiting for "<type 'str'>": [PYBOOT] [beaver 01:50]: got exception: timeout ~$off [PYBOOT] [beaver 01:52]: Done. ======================================================================== Board odroidu3-arm-exynos_defconfig failure log: ------------------------------------------------- [ 1.799336] Key type dns_resolver registered [ 1.803663] Registering SWP/SWPB emulation handler [ 1.811508] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.816219] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.823638] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.830793] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.837379] [drm] No driver support for vblank timestamp query. [ 1.843332] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.849710] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.854844] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.862009] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.870803] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.880533] mmc1: new DDR MMC card at address 0001 [ 1.880593] usb 1-3: New USB device found, idVendor=0424, idProduct=3503 [ 1.880600] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.891925] hub 1-3:1.0: USB hub found [ 1.898796] hub 1-3:1.0: 3 ports detected [ 1.902525] max98090 1-0010: MAX98090 REVID=0x43 [ 1.912040] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.915806] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.921733] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.927667] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.933386] max98090 1-0010: use default 2.8v micbias [ 1.939185] mmcblk1: p1 p2 [ 1.945853] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.950895] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.987186] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:20 UTC (946688420) [ 2.003860] VDD10_HDMI_1.0V: disabling [ 2.004542] vdd_g3d: disabling [ 2.005607] BUCK8_2.8V: disabling [ 2.009560] ALSA device list: [ 2.011244] #0: Odroid-U3 [ 2.014931] Waiting for root device /dev/mmcblk0p2... [PYBOOT] [odroidu3 01:47]: Timed out waiting for "<type 'str'>": [PYBOOT] [odroidu3 01:48]: got exception: timeout ~$off [PYBOOT] [odroidu3 01:49]: Done. ======================================================================== Board omap5uevm-arm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.978136] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.984665] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.992685] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.003775] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.011905] ldo9: bypassed regulator has no supply! [ 2.017029] ldo9: failed to get the current voltage(-517) [ 2.022692] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.036913] smsc95xx v1.0.4 [ 2.040984] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.064267] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.070674] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.097946] smps9: Bringing 0uV into 2100000-2100000uV [ 2.103673] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 6a:5e:89:24:00:17 [ 2.128743] ldo9: bypassed regulator has no supply! [ 2.133866] ldo9: failed to get the current voltage(-517) [ 2.139537] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.153719] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.182373] smps9: Bringing 0uV into 2100000-2100000uV [ 2.201180] ldo9: bypassed regulator has no supply! [ 2.206308] ldo9: failed to get the current voltage(-517) [ 2.211972] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.226467] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:50:03 UTC (946687803) [ 2.242390] pbias_mmc_omap5: disabling [ 2.246348] vmmcsdio_fixed: disabling [ 2.250880] Waiting for root device /dev/mmcblk1p2... [ 2.363513] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.499339] hub 1-2:1.0: USB hub found [ 2.503351] hub 1-2:1.0: 3 ports detected [ 2.509302] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.537312] smps9: Bringing 0uV into 2100000-2100000uV [ 2.556196] ldo9: bypassed regulator has no supply! [ 2.561314] ldo9: failed to get the current voltage(-517) [ 2.566983] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [PYBOOT] [omap5uevm 02:07]: Timed out waiting for "<type 'str'>": [PYBOOT] [omap5uevm 02:08]: got exception: timeout ~$off [PYBOOT] [omap5uevm 02:09]: Done. ======================================================================== Board omap5uevm-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.938199] mmc0: new high speed MMC card at address 0001 [ 1.948890] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.953791] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.960135] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.970287] smps9: Bringing 0uV into 2100000-2100000uV [ 1.978452] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.985000] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.993012] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.004069] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.011805] smsc95xx v1.0.4 [ 2.015127] ldo9: bypassed regulator has no supply! [ 2.020251] ldo9: failed to get the current voltage(-517) [ 2.025918] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.041227] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.064260] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.068085] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 7e:61:da:d8:6b:4d [ 2.082353] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.112211] smps9: Bringing 0uV into 2100000-2100000uV [ 2.130914] ldo9: bypassed regulator has no supply! [ 2.136032] ldo9: failed to get the current voltage(-517) [ 2.141703] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.156201] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:47:38 UTC (946687658) [ 2.172112] pbias_mmc_omap5: disabling [ 2.176056] vmmcsdio_fixed: disabling [ 2.180619] Waiting for root device /dev/mmcblk1p2... [ 2.293489] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.429385] hub 1-2:1.0: USB hub found [ 2.433391] hub 1-2:1.0: 3 ports detected [ 2.439265] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.467185] smps9: Bringing 0uV into 2100000-2100000uV [ 2.485880] ldo9: bypassed regulator has no supply! [ 2.490999] ldo9: failed to get the current voltage(-517) [ 2.496661] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [PYBOOT] [omap5uevm 02:02]: Timed out waiting for "<type 'str'>": [PYBOOT] [omap5uevm 02:03]: got exception: timeout ~$off [PYBOOT] [omap5uevm 02:05]: Done. ======================================================================== Board omap5uevm-arm-omap2plus_defconfig failure log: ------------------------------------------------- [ 3.897224] ldo9: bypassed regulator has no supply! [ 3.902353] ldo9: failed to get the current voltage(-517) [ 3.908023] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 3.930950] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 3.938455] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 3.945022] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 3.951331] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.958179] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 3.967762] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 3.977253] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 3.984311] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 3.990444] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 3.996737] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.003593] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.013185] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.022686] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.029724] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.069906] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 4.076202] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 4.083070] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 4.092649] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 4.102147] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 4.109184] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 4.129816] smps9: Bringing 0uV into 2100000-2100000uV [ 4.158302] ldo9: bypassed regulator has no supply! [ 4.163428] ldo9: failed to get the current voltage(-517) [ 4.169106] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.189234] hctosys: unable to open rtc device (rtc0) [ 4.194529] sr_init: No PMIC hook to init smartreflex [ 4.200030] sr_init: platform driver register failed for SR [ 4.227468] pbias_mmc_omap5: disabling [ 4.231436] vmmcsdio_fixed: disabling [ 4.237541] Waiting for root device /dev/mmcblk1p2... [PYBOOT] [omap5uevm 02:06]: Timed out waiting for "<type 'str'>": [PYBOOT] [omap5uevm 02:07]: got exception: timeout ~$off [PYBOOT] [omap5uevm 02:09]: Done. ======================================================================== Board pi-arm-exynos_defconfig failure log: ------------------------------------------------- [ 3.167089] exynos-drm exynos-drm: fb0: frame buffer device [ 3.185125] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 3.190175] input: gpio-keys as /devices/platform/gpio-keys/input/input2 [ 3.197634] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 3.219838] vdd_1v2_2: disabling [ 3.221776] TPS65090_RAILSDCDC3: disabling [ 3.225698] TPS65090_RAILSLDO1: disabling [ 3.229660] TPS65090_RAILSLDO2: disabling [ 3.234184] ALSA device list: [ 3.236618] #0: Peach-Pi-I2S-MAX98091 [ 3.241807] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 3.257239] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.263926] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 3.273056] devtmpfs: mounted [ 3.275121] Freeing unused kernel memory: 1024K (c0a00000 - c0b00000) [PYBOOT] [pi 00:26]: kernel: finished booting, starting userspace. [ 3.285142] Unhandled fault: imprecise external abort (0x1406) at 0x00000000 [ 3.290704] pgd = edbbc000 [ 3.293394] [00000000] *pgd=fb82c835 [ 3.305179] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 [ 3.305179] [ 3.312828] CPU: 0 PID: 1 Comm: init Not tainted 4.7.0-rc2-00325-g45b00c9 #1 [ 3.319852] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 3.325945] [<c010dfec>] (unwind_backtrace) from [<c010ad18>] (show_stack+0x10/0x14) [ 3.333651] [<c010ad18>] (show_stack) from [<c03269f8>] (dump_stack+0x78/0x8c) [ 3.340853] [<c03269f8>] (dump_stack) from [<c0196820>] (panic+0xd8/0x250) [ 3.347706] [<c0196820>] (panic) from [<c011e6a0>] (do_exit+0xa10/0xa34) [ 3.354383] [<c011e6a0>] (do_exit) from [<c011f27c>] (do_group_exit+0x3c/0xbc) [ 3.361585] [<c011f27c>] (do_group_exit) from [<c012875c>] (get_signal+0x220/0x5a4) [ 3.369217] [<c012875c>] (get_signal) from [<c010a460>] (do_signal+0xc4/0x418) [ 3.376418] [<c010a460>] (do_signal) from [<c010a958>] (do_work_pending+0x94/0xa4) [ 3.383965] [<c010a958>] (do_work_pending) from [<c0107714>] (slow_work_pending+0xc/0x20) [ 3.392130] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 [ 3.392130] [PYBOOT] [pi 00:27]: got exception: panic ~$off [PYBOOT] [pi 00:28]: Done. ======================================================================== Board pi-arm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.533381] isl29018 7-0044: No cache defaults, reading back from HW [ 1.539733] isl29018 7-0044: Failed to read 1: -6 [ 1.544319] isl29018 7-0044: regmap initialization fails: -6 [ 1.555206] NET: Registered protocol family 10 [ 1.559632] sit: IPv6 over IPv4 tunneling driver [ 1.563214] NET: Registered protocol family 17 [ 1.567218] can: controller area network core (rev 20120528 abi 9) [ 1.573408] NET: Registered protocol family 29 [ 1.577795] can: raw protocol (rev 20120528) [ 1.582045] can: broadcast manager protocol (rev 20120528 t) [ 1.587687] can: netlink gateway (rev 20130117) max_hops=1 [ 1.593412] Key type dns_resolver registered [ 1.597736] ThumbEE CPU extension supported. [ 1.601655] Registering SWP/SWPB emulation handler [ 1.611554] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.617033] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.623401] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.628775] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.638873] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.649227] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.654676] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.664860] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.671042] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.676420] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.686155] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.708710] Waiting for root device /dev/mmcblk0p1... [ 1.712585] mmc0: tuning execution failed: -5 [ 1.716643] mmc0: error -5 whilst initialising MMC card [ 2.583172] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597303] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.602767] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609136] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614519] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [PYBOOT] [pi 02:09]: Timed out waiting for "<type 'str'>": [PYBOOT] [pi 02:10]: got exception: timeout ~$off [PYBOOT] [pi 02:11]: Done. ======================================================================== Board pi-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.533293] isl29018 7-0044: No cache defaults, reading back from HW [ 1.539647] isl29018 7-0044: Failed to read 1: -6 [ 1.544231] isl29018 7-0044: regmap initialization fails: -6 [ 1.555125] NET: Registered protocol family 10 [ 1.559559] sit: IPv6 over IPv4 tunneling driver [ 1.563131] NET: Registered protocol family 17 [ 1.567138] can: controller area network core (rev 20120528 abi 9) [ 1.573329] NET: Registered protocol family 29 [ 1.577716] can: raw protocol (rev 20120528) [ 1.581965] can: broadcast manager protocol (rev 20120528 t) [ 1.587607] can: netlink gateway (rev 20130117) max_hops=1 [ 1.593335] Key type dns_resolver registered [ 1.597653] ThumbEE CPU extension supported. [ 1.601576] Registering SWP/SWPB emulation handler [ 1.611491] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.616972] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.623338] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.628714] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.638816] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.649156] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.654605] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.664791] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.670971] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.676350] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.686124] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.708661] Waiting for root device /dev/mmcblk0p1... [ 1.712509] mmc0: tuning execution failed: -5 [ 1.716597] mmc0: error -5 whilst initialising MMC card [ 2.583084] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597245] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.602702] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609074] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614457] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [PYBOOT] [pi 01:47]: Timed out waiting for "<type 'str'>": [PYBOOT] [pi 01:48]: got exception: timeout ~$off [PYBOOT] [pi 01:49]: Done.

8 years

mainline boot: 632 boots: 0 failed, 630 passed with 2 offline (v4.7-rc2-300-g3d0f0b6a5520)

by kernelci.org bot

mainline boot: 632 boots: 0 failed, 630 passed with 2 offline (v4.7-rc2-300-g3d0f0b6a5520) Full Boot Summary: https://kernelci.org/boot/all/job/mainline/kernel/v4.7-rc2-300-g3d0f0b6a552… Full Build Summary: https://kernelci.org/build/mainline/kernel/v4.7-rc2-300-g3d0f0b6a5520/ Tree: mainline Branch: local/master Git Describe: v4.7-rc2-300-g3d0f0b6a5520 Git Commit: 3d0f0b6a5520878305589411b8d434fe088e4f21 Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git Tested: 109 unique boards, 24 SoC families, 38 builds out of 144 Offline Platforms: arm: multi_v7_defconfig+CONFIG_EFI=y: hip04-d01: 1 offline lab multi_v7_defconfig+CONFIG_EFI=y+CONFIG_ARM_LPAE=y: hip04-d01: 1 offline lab --- For more info write to <info(a)kernelci.org>

8 years

master build: 0 failures 3 warnings (v4.7-rc2-300-g3d0f0b6)

by Build bot for Mark Brown

Tree/Branch: master Git describe: v4.7-rc2-300-g3d0f0b6 Commit: 3d0f0b6a55 Merge branch 'for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Build Time: 79 min 36 sec Passed: 9 / 9 (100.00 %) Failed: 0 / 9 ( 0.00 %) Errors: 0 Warnings: 3 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): 3 warnings 0 mismatches : arm64-allmodconfig 1 warnings 0 mismatches : arm64-defconfig ------------------------------------------------------------------------------- Warnings Summary: 3 2 ../drivers/xen/balloon.c:154:13: warning: 'release_memory_resource' declared 'static' but never defined [-Wunused-function] 1 ../fs/reiserfs/ibalance.c:1156:2: warning: 'new_insert_key' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 ../drivers/staging/iio/adc/ad7606_spi.c:24:18: warning: 'data' may be used uninitialized in this function [-Wmaybe-uninitialized] =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- arm64-allmodconfig : PASS, 0 errors, 3 warnings, 0 section mismatches Warnings: ../fs/reiserfs/ibalance.c:1156:2: warning: 'new_insert_key' may be used uninitialized in this function [-Wmaybe-uninitialized] ../drivers/staging/iio/adc/ad7606_spi.c:24:18: warning: 'data' may be used uninitialized in this function [-Wmaybe-uninitialized] ../drivers/xen/balloon.c:154:13: warning: 'release_memory_resource' declared 'static' but never defined [-Wunused-function] ------------------------------------------------------------------------------- arm64-defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: ../drivers/xen/balloon.c:154:13: warning: 'release_memory_resource' declared 'static' but never defined [-Wunused-function] ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: arm64-allnoconfig arm-multi_v5_defconfig arm-multi_v7_defconfig x86_64-defconfig arm-allmodconfig arm-allnoconfig x86_64-allnoconfig

8 years

mainline boot: 302 boots: 0 failed, 299 passed with 2 offline, 1 conflict (v4.7-rc2-283-gccf55f73a607)

by kernelci.org bot

mainline boot: 302 boots: 0 failed, 299 passed with 2 offline, 1 conflict (v4.7-rc2-283-gccf55f73a607) Full Boot Summary: https://kernelci.org/boot/all/job/mainline/kernel/v4.7-rc2-283-gccf55f73a60… Full Build Summary: https://kernelci.org/build/mainline/kernel/v4.7-rc2-283-gccf55f73a607/ Tree: mainline Branch: local/master Git Describe: v4.7-rc2-283-gccf55f73a607 Git Commit: ccf55f73a607dba0cec470e677e3fad754304220 Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git Tested: 61 unique boards, 16 SoC families, 31 builds out of 144 Offline Platforms: arm: multi_v7_defconfig+CONFIG_EFI=y: hip04-d01: 1 offline lab multi_v7_defconfig+CONFIG_EFI=y+CONFIG_ARM_LPAE=y: hip04-d01: 1 offline lab Conflicting Boot Failure Detected: (These likely are not failures as other labs are reporting PASS. Needs review.) arm: multi_v7_defconfig+CONFIG_SMP=n: imx6q-sabrelite: lab-collabora: FAIL lab-embeddedbits: PASS --- For more info write to <info(a)kernelci.org>

8 years

mainline boot: 289 boots: 1 failed, 285 passed with 2 offline, 1 conflict (v4.7-rc2-267-g33fc259a2053)

by kernelci.org bot

mainline boot: 289 boots: 1 failed, 285 passed with 2 offline, 1 conflict (v4.7-rc2-267-g33fc259a2053) Full Boot Summary: https://kernelci.org/boot/all/job/mainline/kernel/v4.7-rc2-267-g33fc259a205… Full Build Summary: https://kernelci.org/build/mainline/kernel/v4.7-rc2-267-g33fc259a2053/ Tree: mainline Branch: local/master Git Describe: v4.7-rc2-267-g33fc259a2053 Git Commit: 33fc259a2053f89d6ea0f07f534079b58899d128 Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git Tested: 57 unique boards, 16 SoC families, 31 builds out of 144 Boot Failure Detected: https://kernelci.org/boot/?v4.7-rc2-267-g33fc259a2053&fail arm: bcm2835_defconfig: bcm2836-rpi-2-b: 1 failed lab Offline Platforms: arm: multi_v7_defconfig+CONFIG_EFI=y: hip04-d01: 1 offline lab multi_v7_defconfig+CONFIG_EFI=y+CONFIG_ARM_LPAE=y: hip04-d01: 1 offline lab Conflicting Boot Failure Detected: (These likely are not failures as other labs are reporting PASS. Needs review.) arm: multi_v7_defconfig+CONFIG_SMP=n: imx6q-sabrelite: lab-collabora: FAIL lab-embeddedbits: PASS --- For more info write to <info(a)kernelci.org>

8 years

master build: 0 failures 3 warnings (v4.7-rc2-283-gccf55f7)

by Build bot for Mark Brown

Tree/Branch: master Git describe: v4.7-rc2-283-gccf55f7 Commit: ccf55f73a6 Merge tag 'powerpc-4.7-3Michael Ellerman:' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Build Time: 79 min 39 sec Passed: 9 / 9 (100.00 %) Failed: 0 / 9 ( 0.00 %) Errors: 0 Warnings: 3 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): 3 warnings 0 mismatches : arm64-allmodconfig 1 warnings 0 mismatches : arm64-defconfig ------------------------------------------------------------------------------- Warnings Summary: 3 2 ../drivers/xen/balloon.c:154:13: warning: 'release_memory_resource' declared 'static' but never defined [-Wunused-function] 1 ../fs/reiserfs/ibalance.c:1156:2: warning: 'new_insert_key' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 ../drivers/staging/iio/adc/ad7606_spi.c:24:18: warning: 'data' may be used uninitialized in this function [-Wmaybe-uninitialized] =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- arm64-allmodconfig : PASS, 0 errors, 3 warnings, 0 section mismatches Warnings: ../fs/reiserfs/ibalance.c:1156:2: warning: 'new_insert_key' may be used uninitialized in this function [-Wmaybe-uninitialized] ../drivers/staging/iio/adc/ad7606_spi.c:24:18: warning: 'data' may be used uninitialized in this function [-Wmaybe-uninitialized] ../drivers/xen/balloon.c:154:13: warning: 'release_memory_resource' declared 'static' but never defined [-Wunused-function] ------------------------------------------------------------------------------- arm64-defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: ../drivers/xen/balloon.c:154:13: warning: 'release_memory_resource' declared 'static' but never defined [-Wunused-function] ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: arm64-allnoconfig arm-multi_v5_defconfig arm-multi_v7_defconfig x86_64-defconfig arm-allmodconfig arm-allnoconfig x86_64-allnoconfig

8 years

tegra boot: 595 boots: 0 failed, 590 passed with 2 offline, 3 conflicts (v4.7-rc1-20-gf59273b16284)

by kernelci.org bot

tegra boot: 595 boots: 0 failed, 590 passed with 2 offline, 3 conflicts (v4.7-rc1-20-gf59273b16284) Full Boot Summary: https://kernelci.org/boot/all/job/tegra/kernel/v4.7-rc1-20-gf59273b16284/ Full Build Summary: https://kernelci.org/build/tegra/kernel/v4.7-rc1-20-gf59273b16284/ Tree: tegra Branch: local/for-next Git Describe: v4.7-rc1-20-gf59273b16284 Git Commit: f59273b16284e82bac2a98c313da9149b52b2e40 Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git Tested: 104 unique boards, 24 SoC families, 37 builds out of 143 Offline Platforms: arm: multi_v7_defconfig+CONFIG_EFI=y: hip04-d01: 1 offline lab multi_v7_defconfig+CONFIG_EFI=y+CONFIG_ARM_LPAE=y: hip04-d01: 1 offline lab Conflicting Boot Failures Detected: (These likely are not failures as other labs are reporting PASS. Needs review.) arm64: defconfig+CONFIG_LKDTM=y: apq8016-sbc: lab-baylibre-seattle: PASS lab-mhart: FAIL defconfig: apq8016-sbc: lab-baylibre-seattle: PASS lab-mhart: FAIL defconfig+CONFIG_RANDOMIZE_BASE=y: apq8016-sbc: lab-baylibre-seattle: PASS lab-mhart: FAIL --- For more info write to <info(a)kernelci.org>

8 years

mainline build: 20 warnings 1 failures (mainline/v4.7-rc2-300-g3d0f0b6)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 3d0f0b6 Merge branch 'for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v4.7-rc2-300-g3d0f0b6/ Runtime: 18m 39s Passed: 119 Failed: 1 Warnings: 20 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: arm64.allmodconfig ------------------------------------------------------------------------------- Errors: arm64.allmodconfig: /work/build/batch/samples/seccomp/bpf-fancy.c:13:27: fatal error: linux/seccomp.h: No such file or directory /work/build/batch/samples/seccomp/bpf-helper.h:20:50: fatal error: linux/seccomp.h: No such file or directory /work/build/batch/samples/seccomp/dropper.c:20:27: fatal error: linux/seccomp.h: No such file or directory /work/build/batch/samples/seccomp/bpf-direct.c:21:27: fatal error: linux/seccomp.h: No such file or directory Warnings: 1 drivers/block/floppy.c:1777:44: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:1779:44: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:4487:45: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:4495:45: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:810:44: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:825:43: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:826:43: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/infiniband/core/cma.c:1253:12: warning: 'src_addr_storage.sin_addr.s_addr' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 drivers/of/of_reserved_mem.c:131:180: warning: comparison of distinct pointer types lacks a cast 1 drivers/of/of_reserved_mem.c:131:182: warning: comparison of distinct pointer types lacks a cast 1 drivers/of/of_reserved_mem.c:131:364: warning: comparison of distinct pointer types lacks a cast 1 drivers/of/of_reserved_mem.c:131:368: warning: comparison of distinct pointer types lacks a cast 1 drivers/phy/phy-exynos-mipi-video.c:238:13: warning: 'val' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 drivers/staging/iio/adc/ad7606_spi.c:24:18: warning: 'data' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 fs/reiserfs/ibalance.c:1156:2: warning: 'new_insert_key' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 include/sound/control.h:219:9: warning: 'master_vol' may be used uninitialized in this function [-Wmaybe-uninitialized] 2 drivers/net/wireless/intel/iwlegacy/3945.c:1022:5: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses] 2 drivers/xen/balloon.c:154:13: warning: 'release_memory_resource' declared 'static' but never defined [-Wunused-function] Section mismatches:

8 years

mainline boot: 49 passed 9 failed (mainline/v4.7-rc2-300-g3d0f0b6)

by Olof's autobooter

Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.7-rc2-300-g3d0f0b6/ Failed boards: arndale multi_v7_nosmp_defconfig : NO BUILD bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver arm-tegra_defconfig : FAILED 1:48.57 beaver arm-multi_v7_defconfig : FAILED 1:49.69 beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:49.89 omap5uevm arm-omap2plus_defconfig : FAILED 2:06.46 omap5uevm arm-multi_v7_defconfig : FAILED 2:13.08 omap5uevm arm-multi_lpae_defconfig : FAILED 2:20.14 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-exynos_defconfig : FAILED 1:52.71 pi arm-multi_v7_defconfig : FAILED 2:01.34 pi arm-multi_lpae_defconfig : FAILED 2:08.90 pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard multi_v7_nosmp_defconfig : NO BUILD Successful boards: apc arm-vt8500_v6_v7_defconfig : passed 1:16.02 arndale arm-exynos_defconfig : passed 1:32.88 arndale arm-multi_v7_defconfig : passed 1:30.88 arndale arm-multi_lpae_defconfig : passed 1:41.96 bbb arm-omap2plus_defconfig : passed 1:40.97 bbb arm-multi_v7_defconfig : passed 1:18.78 beagleboard-x15 arm-omap2plus_defconfig : warnings 0:53.14 beagleboard-x15 arm-multi_v7_defconfig : warnings 0:51.81 beagleboard-x15 arm-multi_lpae_defconfig : warnings 0:55.23 capri arm-bcm_defconfig : passed 0:53.57 capri arm-multi_v7_defconfig : passed 0:49.66 chitra powerpc-pasemi_defconfig : passed 2:02.39 chitra powerpc-ppc64_defconfig : passed 2:01.64 colombus arm-sunxi_defconfig : passed 2:30.21 colombus arm-multi_v7_defconfig : passed 2:40.59 colombus arm-multi_lpae_defconfig : passed 2:26.39 cosmic arm-imx_v6_v7_defconfig : passed 3:23.38 cosmic arm-multi_v7_defconfig : passed 3:15.89 cubie arm-sunxi_defconfig : passed 0:51.36 cubie arm-multi_v7_defconfig : passed 0:57.83 cubie2 arm-sunxi_defconfig : passed 0:49.30 cubie2 arm-multi_v7_defconfig : passed 0:59.04 cubie2 arm-multi_lpae_defconfig : passed 0:51.56 cubox arm-multi_v7_defconfig : passed 1:08.91 cubox arm-mvebu_v7_defconfig : passed 1:06.49 dalmore arm-tegra_defconfig : warnings 1:27.75 dalmore arm-multi_v7_defconfig : warnings 1:31.88 dalmore arm-multi_lpae_defconfig : warnings 1:35.84 jetsontk1 arm-tegra_defconfig : warnings 0:52.00 jetsontk1 arm-multi_v7_defconfig : warnings 0:52.34 jetsontk1 arm-multi_lpae_defconfig : warnings 0:57.44 pandaes arm-omap2plus_defconfig : warnings 1:43.83 pandaes arm-multi_v7_defconfig : passed 1:49.02 parallella arm-multi_v7_defconfig : passed 2:48.87 pit arm-exynos_defconfig : passed 2:10.12 pit arm-multi_v7_defconfig : passed 2:23.17 pit arm-multi_lpae_defconfig : passed 2:15.48 seaboard arm-tegra_defconfig : warnings 1:06.96 seaboard arm-multi_v7_defconfig : warnings 0:59.67 seattle arm64-defconfig : passed 2:27.18 snow arm-exynos_defconfig : passed 2:11.00 snow arm-multi_v7_defconfig : passed 2:03.71 snow arm-multi_lpae_defconfig : passed 2:01.33 snowball arm-u8500_defconfig : passed 2:41.13 snowball arm-multi_v7_defconfig : passed 1:40.56 trimslice arm-tegra_defconfig : warnings 1:43.50 trimslice arm-multi_v7_defconfig : warnings 1:50.41 wandboard arm-imx_v6_v7_defconfig : passed 1:16.17 wandboard arm-multi_v7_defconfig : passed 1:22.19 Offline boards: colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:18.15 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:21.73 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 2:27.70 hummingboard arm-multi_v7_defconfig : OFFLINE 2:12.69 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:47.21 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:57.04 sama5 arm-sama5_defconfig : OFFLINE 2:23.48 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:36.58 socfpga arm-socfpga_defconfig : OFFLINE 2:19.09 socfpga arm-multi_v7_defconfig : OFFLINE 2:19.67 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board beaver-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.415039] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.421559] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.428514] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.434100] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.441103] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.451101] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.463220] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.469839] [drm] No driver support for vblank timestamp query. [ 3.475783] drm drm: No connectors reported connected with modes [ 3.481788] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.508330] Console: switching to colour frame buffer device 128x48 [ 3.520309] drm drm: fb0: frame buffer device [ 3.538673] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.549453] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.555916] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.561325] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.569160] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.583688] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.590738] hub 1-0:1.0: USB hub found [ 3.594510] hub 1-0:1.0: 1 port detected [ 3.599414] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.604830] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.612567] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.628678] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.635628] hub 2-0:1.0: USB hub found [ 3.639394] hub 2-0:1.0: 1 port detected [ 3.648081] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.661741] vdd_sata,avdd_plle: disabling [ 3.666468] usb1_vbus: disabling [ 3.670568] Waiting for root device /dev/mmcblk0p1... [ 3.948681] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.894057] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [ 70.558681] random: nonblocking pool is initialized [PYBOOT] [beaver 01:46]: Timed out waiting for "<type 'str'>": [PYBOOT] [beaver 01:47]: got exception: timeout ~$off [PYBOOT] [beaver 01:48]: Done. ======================================================================== Board beaver-arm-tegra_defconfig failure log: ------------------------------------------------- [ 6.374184] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 6.381226] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.386827] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 6.394337] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 6.404335] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 6.417258] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.423877] [drm] No driver support for vblank timestamp query. [ 6.429883] drm drm: No connectors reported connected with modes [ 6.435893] [drm] Cannot find any crtc or sizes - going 1024x768 [ 6.462981] Console: switching to colour frame buffer device 128x48 [ 6.474787] drm drm: fb0: frame buffer device [ 6.501066] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 6.510367] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 6.516846] tegra-ehci 7d004000.usb: EHCI Host Controller [ 6.522278] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 6.530246] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 6.551070] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 6.558962] hub 1-0:1.0: USB hub found [ 6.562742] hub 1-0:1.0: 1 port detected [ 6.567547] tegra-ehci 7d008000.usb: EHCI Host Controller [ 6.572970] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 6.580855] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 6.601066] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 6.608851] hub 2-0:1.0: USB hub found [ 6.612626] hub 2-0:1.0: 1 port detected [ 6.622247] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 6.640402] vdd_sata,avdd_plle: disabling [ 6.645129] usb1_vbus: disabling [ 6.648538] ALSA device list: [ 6.651549] #0: NVIDIA Tegra Beaver [ 6.655755] Waiting for root device /dev/mmcblk0p1... [ 6.931071] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 7.931261] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [PYBOOT] [beaver 01:45]: Timed out waiting for "<type 'str'>": [PYBOOT] [beaver 01:46]: got exception: timeout ~$off [PYBOOT] [beaver 01:48]: Done. ======================================================================== Board odroidu3-arm-exynos_defconfig failure log: ------------------------------------------------- [ 1.804780] Key type dns_resolver registered [ 1.809101] Registering SWP/SWPB emulation handler [ 1.817071] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.821666] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.829066] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.836219] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.842808] [drm] No driver support for vblank timestamp query. [ 1.848753] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.855135] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.860281] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.867432] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.876341] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.885667] usb 1-3: New USB device found, idVendor=0424, idProduct=3503 [ 1.885673] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.899773] hub 1-3:1.0: USB hub found [ 1.903180] max98090 1-0010: MAX98090 REVID=0x43 [ 1.903297] mmc1: new DDR MMC card at address 0001 [ 1.903322] hub 1-3:1.0: 3 ports detected [ 1.904443] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.909664] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.909850] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.910044] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.911120] mmcblk1: p1 p2 [ 1.943536] max98090 1-0010: use default 2.8v micbias [ 1.952439] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.955644] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.993039] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 2.008857] VDD10_HDMI_1.0V: disabling [ 2.009532] vdd_g3d: disabling [ 2.010604] BUCK8_2.8V: disabling [ 2.014538] ALSA device list: [ 2.016255] #0: Odroid-U3 [ 2.019867] Waiting for root device /dev/mmcblk0p2... [PYBOOT] [odroidu3 01:47]: Timed out waiting for "<type 'str'>": [PYBOOT] [odroidu3 01:48]: got exception: timeout ~$off [PYBOOT] [odroidu3 01:49]: Done. ======================================================================== Board omap5uevm-arm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.932943] smps6: Bringing 1350000uV into 1200000-1200000uV [ 1.943159] mmc0: new high speed MMC card at address 0001 [ 1.949083] smps9: Bringing 0uV into 2100000-2100000uV [ 1.954502] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.959411] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.965779] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.967994] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 56:ab:e4:38:ec:53 [ 1.986970] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.993467] ldo2: Bringing 0uV into 2800000-2800000uV [ 2.001428] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.012545] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.020797] ldo9: bypassed regulator has no supply! [ 2.025912] ldo9: failed to get the current voltage(-517) [ 2.031575] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.046883] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.069271] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.075661] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.102211] smps9: Bringing 0uV into 2100000-2100000uV [ 2.120923] ldo9: bypassed regulator has no supply! [ 2.126044] ldo9: failed to get the current voltage(-517) [ 2.131707] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.146263] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 03:07:26 UTC (946696046) [ 2.162181] pbias_mmc_omap5: disabling [ 2.166129] vmmcsdio_fixed: disabling [ 2.170662] Waiting for root device /dev/mmcblk1p2... [ 2.193508] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.329405] hub 1-2:1.0: USB hub found [ 2.333416] hub 1-2:1.0: 3 ports detected [ 2.339291] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.367226] smps9: Bringing 0uV into 2100000-2100000uV [ 2.385906] ldo9: bypassed regulator has no supply! [ 2.391025] ldo9: failed to get the current voltage(-517) [ 2.396688] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [PYBOOT] [omap5uevm 02:17]: Timed out waiting for "<type 'str'>": [PYBOOT] [omap5uevm 02:18]: got exception: timeout ~$off [PYBOOT] [omap5uevm 02:19]: Done. ======================================================================== Board omap5uevm-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.933205] smps6: Bringing 1350000uV into 1200000-1200000uV [ 1.943432] mmc0: new high speed MMC card at address 0001 [ 1.949375] smps9: Bringing 0uV into 2100000-2100000uV [ 1.954801] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.959693] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.966043] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.968051] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, b6:6f:a8:3d:de:01 [ 1.987194] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.993739] ldo2: Bringing 0uV into 2800000-2800000uV [ 2.001709] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.012801] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.020998] ldo9: bypassed regulator has no supply! [ 2.026117] ldo9: failed to get the current voltage(-517) [ 2.031783] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.047053] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.074238] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.080626] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.107238] smps9: Bringing 0uV into 2100000-2100000uV [ 2.125937] ldo9: bypassed regulator has no supply! [ 2.131056] ldo9: failed to get the current voltage(-517) [ 2.136722] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.151258] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 03:04:54 UTC (946695894) [ 2.167173] pbias_mmc_omap5: disabling [ 2.171113] vmmcsdio_fixed: disabling [ 2.175643] Waiting for root device /dev/mmcblk1p2... [ 2.193478] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.329352] hub 1-2:1.0: USB hub found [ 2.333358] hub 1-2:1.0: 3 ports detected [ 2.339229] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.367243] smps9: Bringing 0uV into 2100000-2100000uV [ 2.385932] ldo9: bypassed regulator has no supply! [ 2.391050] ldo9: failed to get the current voltage(-517) [ 2.396712] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [PYBOOT] [omap5uevm 02:10]: Timed out waiting for "<type 'str'>": [PYBOOT] [omap5uevm 02:11]: got exception: timeout ~$off [PYBOOT] [omap5uevm 02:12]: Done. ======================================================================== Board omap5uevm-arm-omap2plus_defconfig failure log: ------------------------------------------------- [ 3.907707] ldo9: bypassed regulator has no supply! [ 3.912834] ldo9: failed to get the current voltage(-517) [ 3.918499] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 3.941418] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 3.948934] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 3.955477] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 3.961806] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.968674] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 3.978268] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 3.987737] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 3.994825] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 4.000963] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 4.007256] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.014121] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.023719] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.033214] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.040252] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.058581] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 4.064869] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 4.071733] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 4.081320] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 4.090819] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 4.097853] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 4.119164] smps9: Bringing 0uV into 2100000-2100000uV [ 4.148351] ldo9: bypassed regulator has no supply! [ 4.153462] ldo9: failed to get the current voltage(-517) [ 4.159147] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.179271] hctosys: unable to open rtc device (rtc0) [ 4.184564] sr_init: No PMIC hook to init smartreflex [ 4.190071] sr_init: platform driver register failed for SR [ 4.217500] pbias_mmc_omap5: disabling [ 4.221466] vmmcsdio_fixed: disabling [ 4.227605] Waiting for root device /dev/mmcblk1p2... [PYBOOT] [omap5uevm 02:03]: Timed out waiting for "<type 'str'>": [PYBOOT] [omap5uevm 02:04]: got exception: timeout ~$off [PYBOOT] [omap5uevm 02:06]: Done. ======================================================================== Board pi-arm-exynos_defconfig failure log: ------------------------------------------------- [ 20.958283] BUG: spinlock lockup suspected on CPU#0, kworker/u16:1/80 [ 20.963235] lock: 0xee73f000, .magic: dead4ead, .owner: kworker/u16:1/80, .owner_cpu: 0 [ 20.971302] CPU: 0 PID: 80 Comm: kworker/u16:1 Tainted: G D 4.7.0-rc2-00300-g3d0f0b6 #1 [ 20.980409] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 20.986492] [<c010dfec>] (unwind_backtrace) from [<c010ad18>] (show_stack+0x10/0x14) [ 20.994207] [<c010ad18>] (show_stack) from [<c03269f8>] (dump_stack+0x78/0x8c) [ 21.001408] [<c03269f8>] (dump_stack) from [<c015994c>] (do_raw_spin_lock+0xfc/0x1d8) [ 21.009215] [<c015994c>] (do_raw_spin_lock) from [<c06d2368>] (__schedule+0x84/0x4b8) [ 21.017022] [<c06d2368>] (__schedule) from [<c06d27e8>] (schedule+0x4c/0xac) [ 21.024048] [<c06d27e8>] (schedule) from [<c011e500>] (do_exit+0x870/0xa34) [ 21.030988] [<c011e500>] (do_exit) from [<c010af54>] (die+0x238/0x2f4) [ 21.037497] [<c010af54>] (die) from [<c0114e84>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 21.045391] [<c0114e84>] (__do_kernel_fault.part.0) from [<c0110894>] (do_bad_area+0x0/0x8c) [ 21.053803] [<c0110894>] (do_bad_area) from [<c01105fc>] (do_page_fault+0x0/0x298) [ 21.061350] [<c01105fc>] (do_page_fault) from [<00000000>] ( (null)) [ 21.067768] Sending NMI to all CPUs: [ 21.071323] NMI backtrace for cpu 0 [ 21.074794] CPU: 0 PID: 80 Comm: kworker/u16:1 Tainted: G D 4.7.0-rc2-00300-g3d0f0b6 #1 [ 21.083902] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 21.089982] [<c010dfec>] (unwind_backtrace) from [<c010ad18>] (show_stack+0x10/0x14) [ 21.097699] [<c010ad18>] (show_stack) from [<c03269f8>] (dump_stack+0x78/0x8c) [ 21.104900] [<c03269f8>] (dump_stack) from [<c032a358>] (nmi_cpu_backtrace+0x78/0x7c) [ 21.112706] [<c032a358>] (nmi_cpu_backtrace) from [<c010c934>] (raise_nmi+0x60/0x64) [ 21.120426] [<c010c934>] (raise_nmi) from [<c032a2d8>] (nmi_trigger_all_cpu_backtrace+0x128/0x130) [ 21.129362] [<c032a2d8>] (nmi_trigger_all_cpu_backtrace) from [<c0159954>] (do_raw_spin_lock+0x104/0x1d8) [ 21.138905] [<c0159954>] (do_raw_spin_lock) from [<c06d2368>] (__schedule+0x84/0x4b8) [ 21.146712] [<c06d2368>] (__schedule) from [<c06d27e8>] (schedule+0x4c/0xac) [ 21.153739] [<c06d27e8>] (schedule) from [<c011e500>] (do_exit+0x870/0xa34) [ 21.160679] [<c011e500>] (do_exit) from [<c010af54>] (die+0x238/0x2f4) [ 21.167186] [<c010af54>] (die) from [<c0114e84>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 21.175080] [<c0114e84>] (__do_kernel_fault.part.0) from [<c0110894>] (do_bad_area+0x0/0x8c) [ 21.183494] [<c0110894>] (do_bad_area) from [<c01105fc>] (do_page_fault+0x0/0x298) [ 21.191040] [<c01105fc>] (do_page_fault) from [<00000000>] ( (null)) [PYBOOT] [pi 01:49]: Timed out waiting for "<type 'str'>": [PYBOOT] [pi 01:50]: got exception: timeout ~$off [PYBOOT] [pi 01:52]: Done. ======================================================================== Board pi-arm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.533399] isl29018 7-0044: No cache defaults, reading back from HW [ 1.539750] isl29018 7-0044: Failed to read 1: -6 [ 1.544335] isl29018 7-0044: regmap initialization fails: -6 [ 1.555249] NET: Registered protocol family 10 [ 1.559679] sit: IPv6 over IPv4 tunneling driver [ 1.563256] NET: Registered protocol family 17 [ 1.567260] can: controller area network core (rev 20120528 abi 9) [ 1.573451] NET: Registered protocol family 29 [ 1.577838] can: raw protocol (rev 20120528) [ 1.582087] can: broadcast manager protocol (rev 20120528 t) [ 1.587729] can: netlink gateway (rev 20130117) max_hops=1 [ 1.593452] Key type dns_resolver registered [ 1.597783] ThumbEE CPU extension supported. [ 1.601697] Registering SWP/SWPB emulation handler [ 1.611579] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.617060] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.623426] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.628801] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.638900] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.649220] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.654667] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.664851] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.671033] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.676411] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.686130] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.708752] Waiting for root device /dev/mmcblk0p1... [ 1.712641] mmc0: tuning execution failed: -5 [ 1.716694] mmc0: error -5 whilst initialising MMC card [ 2.583208] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597330] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.602791] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609160] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614544] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [PYBOOT] [pi 02:06]: Timed out waiting for "<type 'str'>": [PYBOOT] [pi 02:07]: got exception: timeout ~$off [PYBOOT] [pi 02:08]: Done. ======================================================================== Board pi-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.538805] isl29018 7-0044: No cache defaults, reading back from HW [ 1.545159] isl29018 7-0044: Failed to read 1: -6 [ 1.549744] isl29018 7-0044: regmap initialization fails: -6 [ 1.560683] NET: Registered protocol family 10 [ 1.565116] sit: IPv6 over IPv4 tunneling driver [ 1.568691] NET: Registered protocol family 17 [ 1.572694] can: controller area network core (rev 20120528 abi 9) [ 1.578885] NET: Registered protocol family 29 [ 1.583273] can: raw protocol (rev 20120528) [ 1.587522] can: broadcast manager protocol (rev 20120528 t) [ 1.593163] can: netlink gateway (rev 20130117) max_hops=1 [ 1.598890] Key type dns_resolver registered [ 1.603218] ThumbEE CPU extension supported. [ 1.607133] Registering SWP/SWPB emulation handler [ 1.617072] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.622554] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.628922] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.634296] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.644403] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.654775] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.660223] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.670409] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.676589] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.681967] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.691688] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.714409] Waiting for root device /dev/mmcblk0p1... [ 1.718290] mmc0: tuning execution failed: -5 [ 1.722345] mmc0: error -5 whilst initialising MMC card [ 2.583590] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597744] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.603199] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609573] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614956] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [PYBOOT] [pi 01:58]: Timed out waiting for "<type 'str'>": [PYBOOT] [pi 01:59]: got exception: timeout ~$off [PYBOOT] [pi 02:00]: Done.

8 years

← Newer
1
...
25
26
27
28
29
30
31
...
40
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports June 2016