Kernel-build-reports July 2016

kernel-build-reports@lists.linaro.org

22 participants
493 discussions

mainline boot: 47 passed 17 failed (mainline/v4.7-rc7-185-gb1386ce)

by Olof's autobooter

Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.7-rc7-185-gb1386ce/ Failed boards: arndale arm-multi_v7_nosmp_defconfig : FAILED 2:45.33 beaver arm-tegra_defconfig : FAILED 1:45.33 beaver arm-multi_v7_defconfig : FAILED 1:47.69 beaver arm-multi_v7_nosmp_defconfig : FAILED 1:48.15 colombus arm-multi_v7_defconfig : FAILED 0:00.45 colombus arm-multi_v7_nosmp_defconfig : FAILED 0:00.40 cubox arm-multi_v7_defconfig : FAILED 0:00.75 cubox arm-mvebu_v7_defconfig : FAILED 0:00.92 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 0:00.92 omap5uevm arm-multi_v7_defconfig : FAILED 0:48.74 omap5uevm arm-multi_lpae_defconfig : FAILED 0:51.62 pi arm-multi_v7_defconfig : FAILED 1:51.18 pi arm-multi_lpae_defconfig : FAILED 2:11.34 snowball arm-u8500_defconfig : FAILED 2:08.56 snowball arm-multi_v7_defconfig : FAILED 0:00.60 snowball arm-multi_v7_nosmp_defconfig : FAILED 0:01.28 wandboard arm-imx_v6_v7_defconfig : FAILED 3:00.39 Successful boards: apc arm-vt8500_v6_v7_defconfig : passed 1:16.91 arndale arm-multi_lpae_defconfig : passed 1:29.41 bbb arm-omap2plus_defconfig : passed 1:44.49 bbb arm-multi_v7_defconfig : passed 1:27.63 bbb arm-multi_v7_nosmp_defconfig : passed 1:31.61 beagleboard-x15 arm-omap2plus_defconfig : warnings 0:49.63 beagleboard-x15 arm-multi_v7_defconfig : warnings 0:58.04 beagleboard-x15 arm-multi_lpae_defconfig : warnings 0:51.96 beagleboard-x15 arm-multi_v7_nosmp_defconfig : warnings 1:00.55 capri arm-bcm_defconfig : passed 1:03.47 capri arm-multi_v7_defconfig : passed 1:09.41 capri arm-multi_v7_nosmp_defconfig : warnings 0:41.69 chitra powerpc-pasemi_defconfig : passed 1:54.62 chitra powerpc-ppc64_defconfig : passed 2:02.57 colombus arm-sunxi_defconfig : passed 2:21.15 colombus arm-multi_lpae_defconfig : passed 2:30.19 cosmic arm-imx_v6_v7_defconfig : passed 3:23.68 cubie arm-sunxi_defconfig : passed 0:49.35 cubie arm-multi_v7_defconfig : passed 1:00.14 cubie arm-multi_v7_nosmp_defconfig : passed 1:04.70 cubie2 arm-sunxi_defconfig : passed 0:56.42 cubie2 arm-multi_v7_defconfig : passed 0:54.36 cubie2 arm-multi_lpae_defconfig : passed 1:04.76 cubie2 arm-multi_v7_nosmp_defconfig : warnings 1:10.77 cubox arm-multi_v7_nosmp_defconfig : passed 1:20.21 dalmore arm-tegra_defconfig : passed 1:27.84 dalmore arm-multi_v7_defconfig : passed 1:24.14 dalmore arm-multi_lpae_defconfig : passed 1:25.42 dalmore arm-multi_v7_nosmp_defconfig : warnings 1:27.73 jetsontk1 arm-tegra_defconfig : passed 0:49.62 jetsontk1 arm-multi_v7_defconfig : passed 0:49.60 jetsontk1 arm-multi_lpae_defconfig : passed 0:55.71 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 0:48.18 omap5uevm arm-omap2plus_defconfig : passed 1:10.19 omap5uevm arm-multi_v7_nosmp_defconfig : warnings 1:32.90 pandaes arm-omap2plus_defconfig : warnings 1:40.20 pandaes arm-multi_v7_nosmp_defconfig : warnings 2:01.60 parallella arm-multi_v7_defconfig : passed 2:47.41 pi arm-exynos_defconfig : passed 2:10.61 pit arm-multi_lpae_defconfig : passed 2:19.49 seattle arm64-defconfig : passed 2:20.81 snow arm-exynos_defconfig : passed 2:25.01 snow arm-multi_v7_defconfig : passed 2:01.50 trimslice arm-multi_v7_defconfig : passed 2:01.50 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:34.13 wandboard arm-multi_v7_defconfig : passed 1:32.95 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:12.91 Offline boards: arndale arm-exynos_defconfig : OFFLINE 0:58.39 arndale arm-multi_v7_defconfig : OFFLINE 0:54.00 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:15.60 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:17.82 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 1:25.82 cosmic arm-multi_v7_defconfig : OFFLINE 0:30.29 cosmic arm-multi_v7_nosmp_defconfig : OFFLINE 0:35.94 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 2:44.06 hummingboard arm-multi_v7_defconfig : OFFLINE 2:13.51 hummingboard arm-multi_v7_nosmp_defconfig : OFFLINE 2:11.89 pandaes arm-multi_v7_defconfig : OFFLINE 0:54.71 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 0:27.00 pi arm-multi_v7_nosmp_defconfig : OFFLINE 0:25.13 pit arm-exynos_defconfig : OFFLINE 1:53.40 pit arm-multi_v7_defconfig : OFFLINE 0:31.57 pit arm-multi_v7_nosmp_defconfig : OFFLINE 0:27.39 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:44.95 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:58.46 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:37.39 sama5 arm-sama5_defconfig : OFFLINE 2:16.63 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:23.00 seaboard arm-tegra_defconfig : OFFLINE 2:27.88 seaboard arm-multi_v7_defconfig : OFFLINE 2:40.94 seaboard arm-multi_v7_nosmp_defconfig : OFFLINE 2:13.14 snow arm-multi_lpae_defconfig : OFFLINE 0:34.14 snow arm-multi_v7_nosmp_defconfig : OFFLINE 0:44.05 socfpga arm-socfpga_defconfig : OFFLINE 2:26.58 socfpga arm-multi_v7_defconfig : OFFLINE 2:29.49 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:12.19 trimslice arm-tegra_defconfig : OFFLINE 2:27.22 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board arndale-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- [ 2.077303] MAIN_DC: disabling [ 2.078872] hdmi-en: disabling [ 2.082318] ahci 122f0000.sata: couldn't get PHY in node sata: -517 [ 2.089355] Unable to handle kernel paging request at virtual address c12c34a8 [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.7.0-rc7-00185-gb1386ce (build@brutus) (gcc version 6.1.0 (GCC) ) #1 Fri Jul 22 22:31:26 PDT 2016 [ 2.110899] [c12c34a8] *pgd=4120041e(bad) [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 2.128086] Modules linked in: [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Insignal Arndale evaluation board based on EXYNOS5250 [ 0.000000] cma: Reserved 64 MiB at 0xbc000000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Samsung CPU ID: 0x43520010 [ 0.000000] On node 0 totalpages: 520192 [ 0.000000] free_area_init_node: node 0, pgdat c130d194, node_mem_map eeff8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 192512 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327680 pages, LIFO batch:31 [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at /work/build/batch/arch/arm/kernel/devtree.c:149 arm_dt_init_cpu_maps+0xe4/0x148 [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.7.0-rc7-00185-gb1386ce #1 [ 0.000000] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 0.000000] [<c030e87c>] (unwind_backtrace) from [<c030b41c>] (show_stack+0x10/0x14) [ 0.000000] [<c030b41c>] (show_stack) from [<c03386dc>] (__warn+0xe4/0xfc) [ 0.000000] [<c03386dc>] (__warn) from [<c033872c>] (warn_slowpath_fmt+0x38/0x48) [ 0.000000] [<c033872c>] (warn_slowpath_fmt) from [<c1104e80>] (arm_dt_init_cpu_maps+0xe4/0x148) [ 0.000000] [<c1104e80>] (arm_dt_init_cpu_maps) from [<c1104108>] (setup_arch+0x780/0x944) [ 0.000000] [<c1104108>] (setup_arch) from [<c1100940>] (start_kernel+0x68/0x374) [PYBOOT] [arndale 02:42]: Timed out waiting for "<type 'str'>": [PYBOOT] [arndale 02:43]: got exception: timeout ~$off [PYBOOT] [arndale 02:44]: Done. ======================================================================== Board beaver-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.228077] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.235033] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.241553] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.248492] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.254074] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.261079] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.271077] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.282195] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.288830] [drm] No driver support for vblank timestamp query. [ 3.294771] drm drm: No connectors reported connected with modes [ 3.300780] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.325927] Console: switching to colour frame buffer device 128x48 [ 3.337718] drm drm: fb0: frame buffer device [ 3.358667] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.369460] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.375924] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.381335] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.389184] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.403685] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.410437] hub 1-0:1.0: USB hub found [ 3.414207] hub 1-0:1.0: 1 port detected [ 3.419122] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.424534] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.432277] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.443677] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.450355] hub 2-0:1.0: USB hub found [ 3.454121] hub 2-0:1.0: 1 port detected [ 3.463874] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.477445] vdd_sata,avdd_plle: disabling [ 3.482188] usb1_vbus: disabling [ 3.486276] Waiting for root device /dev/mmcblk0p1... [ 3.763679] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.705514] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [PYBOOT] [beaver 01:44]: Timed out waiting for "<type 'str'>": [PYBOOT] [beaver 01:45]: got exception: timeout ~$off [PYBOOT] [beaver 01:46]: Done. ======================================================================== Board beaver-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- [ 3.202733] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.209685] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.216201] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.223126] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.228707] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.235311] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.245304] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.255819] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.262434] [drm] No driver support for vblank timestamp query. [ 3.268369] drm drm: No connectors reported connected with modes [ 3.274371] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.293718] Console: switching to colour frame buffer device 128x48 [ 3.305493] drm drm: fb0: frame buffer device [ 3.309930] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.320227] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.326685] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.332090] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.339805] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.353113] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.359440] hub 1-0:1.0: USB hub found [ 3.363203] hub 1-0:1.0: 1 port detected [ 3.367925] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.373340] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.380992] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.393110] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.399363] hub 2-0:1.0: USB hub found [ 3.403122] hub 2-0:1.0: 1 port detected [ 3.410582] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.423513] vdd_sata,avdd_plle: disabling [ 3.427897] usb1_vbus: disabling [ 3.431853] Waiting for root device /dev/mmcblk0p1... [ 3.713114] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.651679] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [PYBOOT] [beaver 01:45]: Timed out waiting for "<type 'str'>": [PYBOOT] [beaver 01:46]: got exception: timeout ~$off [PYBOOT] [beaver 01:47]: Done. ======================================================================== Board beaver-arm-tegra_defconfig failure log: ------------------------------------------------- [ 6.194522] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 6.201562] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.207163] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 6.214677] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 6.224677] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 6.237988] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.244607] [drm] No driver support for vblank timestamp query. [ 6.250609] drm drm: No connectors reported connected with modes [ 6.256620] [drm] Cannot find any crtc or sizes - going 1024x768 [ 6.283572] Console: switching to colour frame buffer device 128x48 [ 6.295407] drm drm: fb0: frame buffer device [ 6.321088] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 6.330395] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 6.336871] tegra-ehci 7d004000.usb: EHCI Host Controller [ 6.342303] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 6.350274] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 6.371092] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 6.378992] hub 1-0:1.0: USB hub found [ 6.382772] hub 1-0:1.0: 1 port detected [ 6.387572] tegra-ehci 7d008000.usb: EHCI Host Controller [ 6.392996] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 6.400881] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 6.421086] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 6.428868] hub 2-0:1.0: USB hub found [ 6.432642] hub 2-0:1.0: 1 port detected [ 6.442268] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 6.460437] vdd_sata,avdd_plle: disabling [ 6.465166] usb1_vbus: disabling [ 6.468574] ALSA device list: [ 6.471584] #0: NVIDIA Tegra Beaver [ 6.475780] Waiting for root device /dev/mmcblk0p1... [ 6.751093] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 7.751931] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [PYBOOT] [beaver 01:42]: Timed out waiting for "<type 'str'>": [PYBOOT] [beaver 01:43]: got exception: timeout ~$off [PYBOOT] [beaver 01:44]: Done. ======================================================================== Board colombus-arm-multi_v7_defconfig failure log: ------------------------------------------------- ======================================================================== Board colombus-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- ======================================================================== Board cubox-arm-multi_v7_defconfig failure log: ------------------------------------------------- ======================================================================== Board cubox-arm-mvebu_v7_defconfig failure log: ------------------------------------------------- ======================================================================== Board odroidu3-arm-exynos_defconfig failure log: ------------------------------------------------- ======================================================================== Board omap5uevm-arm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.379483] [<c0b89d58>] (_raw_spin_lock_irqsave) from [<c03640c0>] (try_to_wake_up+0x28/0x2bc) [ 2.379489] [<c03640c0>] (try_to_wake_up) from [<c0385c68>] (handle_irq_event_percpu+0x74/0x14c) [ 2.379495] [<c0385c68>] (handle_irq_event_percpu) from [<c0385d84>] (handle_irq_event+0x44/0x68) [ 2.379500] [<c0385d84>] (handle_irq_event) from [<c0388fb8>] (handle_fasteoi_irq+0xb4/0x194) [ 2.379505] [<c0388fb8>] (handle_fasteoi_irq) from [<c03852e4>] (generic_handle_irq+0x24/0x34) [ 2.379509] [<c03852e4>] (generic_handle_irq) from [<c0385594>] (__handle_domain_irq+0x5c/0xb4) [ 2.379513] [<c0385594>] (__handle_domain_irq) from [<c03017a8>] (gic_handle_irq+0x54/0x98) [ 2.379517] [<c03017a8>] (gic_handle_irq) from [<c030c514>] (__irq_svc+0x54/0x70) [ 2.379519] Exception stack(0xc1301f50 to 0xc1301f98) [ 2.379521] 1f40: 00000001 00000000 ea000013 f0880000 [ 2.379525] 1f60: c1300000 c13024a4 00000000 00000000 c1214580 c1302508 c140e668 c1302510 [ 2.379528] 1f80: 60000013 c1301fa0 c032b014 c0308780 a0000013 ffffffff [ 2.379534] [<c030c514>] (__irq_svc) from [<c0308780>] (arch_cpu_idle+0x20/0x3c) [ 2.379540] [<c0308780>] (arch_cpu_idle) from [<c0379278>] (cpu_startup_entry+0x1bc/0x218) [ 2.379547] [<c0379278>] (cpu_startup_entry) from [<c1100c50>] (start_kernel+0x374/0x380) [ 2.379553] [<c1100c50>] (start_kernel) from [<8020807c>] (0x8020807c) [ 2.379557] Code: 3afffff6 e8bd8070 e30f3ec4 e34c3133 (e593200c) [ 2.379563] ---[ end trace 06cf39df5a9b46e4 ]--- [ 2.379566] Kernel panic - not syncing: Fatal exception in interrupt [ 2.379571] CPU1: stopping [ 2.379576] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 4.7.0-rc7-00185-gb1386ce #1 [ 2.379578] Hardware name: Generic OMAP5 (Flattened Device Tree) [ 2.379586] [<c031038c>] (unwind_backtrace) from [<c030b9ac>] (show_stack+0x10/0x14) [ 2.379593] [<c030b9ac>] (show_stack) from [<c0591d34>] (dump_stack+0x88/0x9c) [ 2.379599] [<c0591d34>] (dump_stack) from [<c030eb3c>] (handle_IPI+0x174/0x194) [ 2.379604] [<c030eb3c>] (handle_IPI) from [<c03017e8>] (gic_handle_irq+0x94/0x98) [ 2.379608] [<c03017e8>] (gic_handle_irq) from [<c030c514>] (__irq_svc+0x54/0x70) [ 2.379611] Exception stack(0xee09bf88 to 0xee09bfd0) [ 2.379615] bf80: 00000001 00000000 ea000013 f0880000 ee09a000 c13024a4 [ 2.379619] bfa0: 00000000 00000000 c1214580 c1302508 c140e668 c1302510 60000013 ee09bfd8 [ 2.379621] bfc0: c032b014 c0308780 a0000013 ffffffff [ 2.379628] [<c030c514>] (__irq_svc) from [<c0308780>] (arch_cpu_idle+0x20/0x3c) [ 2.379634] [<c0308780>] (arch_cpu_idle) from [<c0379278>] (cpu_startup_entry+0x1bc/0x218) [ 2.379638] [<c0379278>] (cpu_startup_entry) from [<80301c8c>] (0x80301c8c) [ 3.219273] ---[ end Kernel panic - not syncing: Fatal exception in interrupt [PYBOOT] [omap5uevm 00:48]: got exception: panic ~$off [PYBOOT] [omap5uevm 00:49]: Done. ======================================================================== Board omap5uevm-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.446556] 1f80: 60000013 c1301fa0 c032b014 c0308780 a0000013 ffffffff [ 2.453445] [<c030c514>] (__irq_svc) from [<c0308780>] (arch_cpu_idle+0x20/0x3c) [ 2.461157] [<c0308780>] (arch_cpu_idle) from [<c0379278>] (cpu_startup_entry+0x1bc/0x218) [ 2.469772] [<c0379278>] (cpu_startup_entry) from [<c1100c50>] (start_kernel+0x374/0x380) [ 2.478288] [<c1100c50>] (start_kernel) from [<8020807c>] (0x8020807c) [ 2.485087] Code: e1d220b0 e5d00001 e6ff2072 e0833110 (e1d330b0) [ 2.491437] ---[ end trace 3bddde15ccb9d70f ]--- [ 2.496247] Kernel panic - not syncing: Fatal exception in interrupt [ 2.502865] CPU1: stopping [ 2.505679] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 4.7.0-rc7-00185-gb1386ce #1 [ 2.514744] Hardware name: Generic OMAP5 (Flattened Device Tree) [ 2.521002] [<c031038c>] (unwind_backtrace) from [<c030b9ac>] (show_stack+0x10/0x14) [ 2.529079] [<c030b9ac>] (show_stack) from [<c0591d34>] (dump_stack+0x88/0x9c) [ 2.536610] [<c0591d34>] (dump_stack) from [<c030eb3c>] (handle_IPI+0x174/0x194) [ 2.544322] [<c030eb3c>] (handle_IPI) from [<c03017e8>] (gic_handle_irq+0x94/0x98) [ 2.552205] [<c03017e8>] (gic_handle_irq) from [<c030c514>] (__irq_svc+0x54/0x70) [ 2.559997] Exception stack(0xee09bf88 to 0xee09bfd0) [ 2.565261] bf80: 00000001 00000000 ea000013 f0880000 ee09a000 c13024a4 [ 2.573777] bfa0: 00000000 00000000 c1214580 c1302508 c140e668 c1302510 2ddc3000 ee09bfd8 [ 2.582302] bfc0: c032b014 c0308780 a0000013 ffffffff [ 2.587569] [<c030c514>] (__irq_svc) from [[ 2.591649] Unable to handle kernel paging request at virtual address 0000fed0 [ 2.591650] pgd = c0204000 [ 2.591653] [0000fed0] *pgd=00000000 [ 2.591656] Internal error: Oops: 5 [#2] SMP ARM [ 2.591658] Modules linked in: [ 2.591662] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 4.7.0-rc7-00185-gb1386ce #1 [ 2.591663] Hardware name: Generic OMAP5 (Flattened Device Tree) [ 2.591665] task: ee0779c0 ti: ee09a000 task.ti: ee09a000 [ 2.591669] PC is at __timer_const_udelay+0x8/0x1c [ 2.591675] LR is at wait_for_xmitr+0x5c/0xd8 [ 2.591678] pc : [<c058fc14>] lr : [<c06eecc0>] psr: 20000193 [ 2.591678] sp : ee09bd90 ip : 00000000 fp : 00000004 [ 2.591680] r10: 00000054 r9 : c133fec4 r8 : 0000270f [[ 2.591684] r3 : 0000fec4 r2 : 00000002 r1 : 0000003c r0 : c133fec4 [ 2.591687] Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none [PYBOOT] [omap5uevm 00:47]: got exception: panic ~$off [PYBOOT] [omap5uevm 00:48]: Done. ======================================================================== Board pi-arm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.539136] isl29018 7-0044: No cache defaults, reading back from HW [ 1.545489] isl29018 7-0044: Failed to read 1: -6 [ 1.550073] isl29018 7-0044: regmap initialization fails: -6 [ 1.561016] NET: Registered protocol family 10 [ 1.565453] sit: IPv6 over IPv4 tunneling driver [ 1.569030] NET: Registered protocol family 17 [ 1.573033] can: controller area network core (rev 20120528 abi 9) [ 1.579223] NET: Registered protocol family 29 [ 1.583611] can: raw protocol (rev 20120528) [ 1.587860] can: broadcast manager protocol (rev 20120528 t) [ 1.593502] can: netlink gateway (rev 20130117) max_hops=1 [ 1.599230] Key type dns_resolver registered [ 1.603554] ThumbEE CPU extension supported. [ 1.607472] Registering SWP/SWPB emulation handler [ 1.617397] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.622878] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.629243] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.634617] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.644723] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.655078] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.660526] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.670713] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.676892] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.682270] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.691995] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.714373] Waiting for root device /dev/mmcblk0p1... [ 1.718256] mmc0: tuning execution failed: -5 [ 1.722311] mmc0: error -5 whilst initialising MMC card [ 2.583917] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.598098] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.603557] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609929] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.615313] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [PYBOOT] [pi 02:07]: Timed out waiting for "<type 'str'>": [PYBOOT] [pi 02:08]: got exception: timeout ~$off [PYBOOT] [pi 02:10]: Done. ======================================================================== Board pi-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.539211] isl29018 7-0044: No cache defaults, reading back from HW [ 1.545565] isl29018 7-0044: Failed to read 1: -6 [ 1.550148] isl29018 7-0044: regmap initialization fails: -6 [ 1.561087] NET: Registered protocol family 10 [ 1.565521] sit: IPv6 over IPv4 tunneling driver [ 1.569108] NET: Registered protocol family 17 [ 1.573108] can: controller area network core (rev 20120528 abi 9) [ 1.579298] NET: Registered protocol family 29 [ 1.583686] can: raw protocol (rev 20120528) [ 1.587935] can: broadcast manager protocol (rev 20120528 t) [ 1.593577] can: netlink gateway (rev 20130117) max_hops=1 [ 1.599303] Key type dns_resolver registered [ 1.603625] ThumbEE CPU extension supported. [ 1.607547] Registering SWP/SWPB emulation handler [ 1.617453] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.622936] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.629300] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.634675] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.644773] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.655139] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.660583] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.670771] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.676950] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.682329] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.692055] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.714411] Waiting for root device /dev/mmcblk0p1... [ 1.718297] mmc0: tuning execution failed: -5 [ 1.722352] mmc0: error -5 whilst initialising MMC card [ 2.584002] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.598177] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.603642] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.610012] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.615396] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [PYBOOT] [pi 01:48]: Timed out waiting for "<type 'str'>": [PYBOOT] [pi 01:49]: got exception: timeout ~$off [PYBOOT] [pi 01:50]: Done. ======================================================================== Board snowball-arm-multi_v7_defconfig failure log: ------------------------------------------------- ======================================================================== Board snowball-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- ======================================================================== Board snowball-arm-u8500_defconfig failure log: ------------------------------------------------- /sbin/dhclient-script: line 49: echo: write error: No space left on device bound to 172.16.20.108 -- renewal in 40505 seconds. [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. INIT: Entering runlevel: 2 [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel 2. [ 27.656097] EXT4-fs error: 15 callbacks suppressed [ 27.661193] EXT4-fs error (device mmcblk3p4): ext4_lookup:1607: inode #2915: comm bootlogs: deleted inode referenced: 11957 [ 28.063018] EXT4-fs error (device mmcblk3p4): ext4_lookup:1607: inode #2915: comm bootlogs: deleted inode referenced: 11957 [ 28.416534] EXT4-fs error (device mmcblk3p4): ext4_lookup:1607: inode #2915: comm chgrp: deleted inode referenced: 11957 [ 28.767730] EXT4-fs error (device mmcblk3p4): ext4_lookup:1607: inode #2915: comm chgrp: deleted inode referenced: 11957 /etc/init.d/bootlogs: 23: /etc/init.d/bootlogs: cannot create /var/log/dmesg: Structure needs cleaning chgrp: cannot access `/var/log/dmesg': Structure needs cleaning [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting web server: apache2apache2: apr_sockaddr_info_get() failed for snowball apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting periodic command scheduler: cron[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Loading cpufreq kernel modules...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone (none). [....] Starting system message bus: dbus[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting OpenBSD Secure Shell server: sshd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] CPUFreq Utilities: Setting ondemand CPUFreq governor...CPU0...CPU1...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. Debian GNU/Linux 7.0 snowball ttyAMA2 snowball login: root root Connected. cu: Got hangup signal cu: waitpid: No child processes Connected. Disconnected. [PYBOOT] [snowball 02:05]: Timed out waiting for "<type 'str'>": [PYBOOT] [snowball 02:06]: got exception: timeout ~$off [PYBOOT] [snowball 02:07]: Done. ======================================================================== Board wandboard-arm-imx_v6_v7_defconfig failure log: ------------------------------------------------- [ 20.048685] mmcblk0: error -110 sending status command, retrying [ 20.057149] mmcblk0: error -110 sending status command, aborting INIT: INIT: cannot execute "/sbin/getty"INIT: cannot execute "/sbin/getty" INIT: cannot exec[ 20.074518] mmcblk0: error -110 sending status command, retrying ute "/sbin/getty"INIT: cannot[ 20.083267] mmcblk0: error -110 sending status command, retrying execute "/sbin/getty" INIT: I[ 20.092141] mmcblk0: error -110 sending status command, aborting d "6" respawning too fast: disabled for 5 minutes INIT: Id "1"[ 20.103622] mmcblk0: error -110 sending status command, retrying respawning too fast: disabled fo[ 20.112647] mmcblk0: error -110 sending status command, retrying r 5 minutes [ 20.121563] mmcblk0: error -110 sending status command, aborting [ 20.132676] mmcblk0: error -110 sending status command, retrying [ 20.141138] mmcblk0: error -110 sending status command, retrying [ 20.149590] mmcblk0: error -110 sending status command, aborting INIT: INIT: cannot execute "/sbin/getty" cannot execute "/sbin/getty" INIT: Id "2" respawning too fast: disabled for 5 minutes INIT: Id "4" respawning too fast: disabled for 5 minutes [ 20.251083] mmcblk0: error -110 sending status command, retrying [ 20.259547] mmcblk0: error -110 sending status command, retrying [ 20.268009] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" [ 20.302671] mmcblk0: error -110 sending status command, retrying [ 20.311141] mmcblk0: error -110 sending status command, retrying [ 20.319612] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: Id "5" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 46.974849] random: nonblocking pool is initialized [PYBOOT] [wandboard 02:57]: Timed out waiting for "<type 'str'>": [PYBOOT] [wandboard 02:58]: got exception: timeout ~$off [PYBOOT] [wandboard 02:59]: Done.

8 years, 5 months

mainline build: 12 warnings 1 failures (mainline/v4.7-rc7-145-g2321884)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 2321884 Merge tag 'm68k-for-v4.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v4.7-rc7-145-g2321884/ Runtime: 60m 52s Passed: 122 Failed: 1 Warnings: 12 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: arm64.allmodconfig ------------------------------------------------------------------------------- Errors: arm64.allmodconfig: /work/build/batch/samples/seccomp/bpf-fancy.c:13:27: fatal error: linux/seccomp.h: No such file or directory /work/build/batch/samples/seccomp/bpf-helper.h:20:50: fatal error: linux/seccomp.h: No such file or directory /work/build/batch/samples/seccomp/dropper.c:20:27: fatal error: linux/seccomp.h: No such file or directory /work/build/batch/samples/seccomp/bpf-direct.c:21:27: fatal error: linux/seccomp.h: No such file or directory Warnings: 1 drivers/block/floppy.c:1777:44: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:1779:44: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:4487:45: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:4495:45: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:810:44: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:825:43: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:826:43: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/infiniband/core/cma.c:1242:12: warning: 'src_addr_storage.sin_addr.s_addr' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 fs/reiserfs/ibalance.c:1156:2: warning: 'new_insert_key' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 include/sound/control.h:219:9: warning: 'master_vol' may be used uninitialized in this function [-Wmaybe-uninitialized] 2 drivers/net/wireless/intel/iwlegacy/3945.c:1022:5: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses] Section mismatches:

8 years, 5 months

mainline boot: 50 passed 13 failed (mainline/v4.7-rc7-145-g2321884)

by Olof's autobooter

Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.7-rc7-145-g2321884/ Failed boards: beaver arm-tegra_defconfig : FAILED 1:45.15 beaver arm-multi_v7_defconfig : FAILED 1:49.58 beaver arm-multi_v7_nosmp_defconfig : FAILED 1:48.28 colombus arm-multi_v7_defconfig : FAILED 0:00.50 colombus arm-multi_v7_nosmp_defconfig : FAILED 0:58.06 cubox arm-multi_v7_nosmp_defconfig : FAILED 0:00.81 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:54.60 omap5uevm arm-multi_v7_defconfig : FAILED 0:51.84 omap5uevm arm-multi_lpae_defconfig : FAILED 2:09.22 pi arm-multi_v7_defconfig : FAILED 1:50.33 pi arm-multi_lpae_defconfig : FAILED 2:01.26 rk3288evb arm-multi_lpae_defconfig : FAILED 0:00.54 snowball arm-multi_v7_nosmp_defconfig : FAILED 0:01.72 Successful boards: apc arm-vt8500_v6_v7_defconfig : passed 1:25.23 arndale arm-exynos_defconfig : passed 1:39.44 bbb arm-omap2plus_defconfig : passed 1:44.10 bbb arm-multi_v7_defconfig : passed 1:26.78 bbb arm-multi_v7_nosmp_defconfig : passed 1:35.53 beagleboard-x15 arm-omap2plus_defconfig : warnings 0:54.25 beagleboard-x15 arm-multi_v7_defconfig : warnings 0:53.80 beagleboard-x15 arm-multi_lpae_defconfig : warnings 0:58.70 beagleboard-x15 arm-multi_v7_nosmp_defconfig : warnings 1:05.42 capri arm-bcm_defconfig : passed 0:49.66 capri arm-multi_v7_defconfig : passed 0:57.27 capri arm-multi_v7_nosmp_defconfig : warnings 0:41.87 chitra powerpc-pasemi_defconfig : passed 2:14.58 chitra powerpc-ppc64_defconfig : passed 2:00.24 colombus arm-sunxi_defconfig : passed 2:22.01 colombus arm-multi_lpae_defconfig : passed 2:33.41 cosmic arm-imx_v6_v7_defconfig : passed 3:20.00 cosmic arm-multi_v7_defconfig : passed 3:02.05 cubie arm-sunxi_defconfig : passed 0:55.01 cubie arm-multi_v7_defconfig : passed 0:57.65 cubie arm-multi_v7_nosmp_defconfig : passed 0:48.09 cubie2 arm-sunxi_defconfig : passed 0:52.79 cubie2 arm-multi_v7_defconfig : passed 0:51.90 cubie2 arm-multi_lpae_defconfig : passed 0:51.80 cubie2 arm-multi_v7_nosmp_defconfig : warnings 1:04.79 cubox arm-multi_v7_defconfig : passed 1:04.92 dalmore arm-tegra_defconfig : passed 1:27.18 dalmore arm-multi_v7_defconfig : passed 1:22.94 dalmore arm-multi_lpae_defconfig : passed 1:38.38 dalmore arm-multi_v7_nosmp_defconfig : warnings 1:27.29 jetsontk1 arm-tegra_defconfig : passed 0:50.76 jetsontk1 arm-multi_v7_defconfig : passed 0:47.16 jetsontk1 arm-multi_lpae_defconfig : passed 0:59.97 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 0:51.93 omap5uevm arm-omap2plus_defconfig : passed 1:06.75 omap5uevm arm-multi_v7_nosmp_defconfig : warnings 1:32.34 pandaes arm-omap2plus_defconfig : warnings 1:48.42 pandaes arm-multi_v7_nosmp_defconfig : warnings 1:54.58 parallella arm-multi_v7_defconfig : passed 2:48.66 parallella arm-multi_v7_nosmp_defconfig : warnings 2:40.35 pi arm-multi_v7_nosmp_defconfig : warnings 2:11.12 seattle arm64-defconfig : passed 2:23.87 snow arm-multi_v7_defconfig : passed 2:10.12 snow arm-multi_lpae_defconfig : passed 1:59.79 trimslice arm-tegra_defconfig : passed 2:49.02 trimslice arm-multi_v7_defconfig : passed 1:37.25 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:31.97 wandboard arm-imx_v6_v7_defconfig : passed 1:13.04 wandboard arm-multi_v7_defconfig : passed 1:20.79 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:12.68 Offline boards: arndale arm-multi_v7_defconfig : OFFLINE 1:41.75 arndale arm-multi_lpae_defconfig : OFFLINE 1:16.11 arndale arm-multi_v7_nosmp_defconfig : OFFLINE 1:01.47 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:18.70 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:17.23 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 1:17.18 cosmic arm-multi_v7_nosmp_defconfig : OFFLINE 0:31.88 cubox arm-mvebu_v7_defconfig : OFFLINE 2:02.56 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 2:34.68 hummingboard arm-multi_v7_defconfig : OFFLINE 2:18.17 hummingboard arm-multi_v7_nosmp_defconfig : OFFLINE 2:13.39 pandaes arm-multi_v7_defconfig : OFFLINE 0:44.86 pi arm-exynos_defconfig : OFFLINE 0:26.85 pit arm-exynos_defconfig : OFFLINE 0:26.31 pit arm-multi_v7_defconfig : OFFLINE 0:25.25 pit arm-multi_lpae_defconfig : OFFLINE 0:24.03 pit arm-multi_v7_nosmp_defconfig : OFFLINE 0:28.95 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:56.65 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:44.35 sama5 arm-sama5_defconfig : OFFLINE 2:20.95 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:26.37 seaboard arm-tegra_defconfig : OFFLINE 2:26.08 seaboard arm-multi_v7_defconfig : OFFLINE 2:20.32 seaboard arm-multi_v7_nosmp_defconfig : OFFLINE 2:13.81 snow arm-exynos_defconfig : OFFLINE 0:31.98 snow arm-multi_v7_nosmp_defconfig : OFFLINE 0:30.12 snowball arm-u8500_defconfig : OFFLINE 0:30.02 snowball arm-multi_v7_defconfig : OFFLINE 1:55.24 socfpga arm-socfpga_defconfig : OFFLINE 2:26.92 socfpga arm-multi_v7_defconfig : OFFLINE 2:19.36 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:12.45 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board beaver-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.228111] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.235067] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.241586] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.248526] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.254109] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.261120] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.271119] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.282584] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.289200] [drm] No driver support for vblank timestamp query. [ 3.295142] drm drm: No connectors reported connected with modes [ 3.301155] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.326650] Console: switching to colour frame buffer device 128x48 [ 3.338790] drm drm: fb0: frame buffer device [ 3.353386] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.364199] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.370666] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.376075] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.383916] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.398397] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.405156] hub 1-0:1.0: USB hub found [ 3.408930] hub 1-0:1.0: 1 port detected [ 3.413860] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.419277] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.427019] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.438392] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.445057] hub 2-0:1.0: USB hub found [ 3.448827] hub 2-0:1.0: 1 port detected [ 3.457658] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.471232] vdd_sata,avdd_plle: disabling [ 3.475944] usb1_vbus: disabling [ 3.480029] Waiting for root device /dev/mmcblk0p1... [ 3.758400] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.697017] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [PYBOOT] [beaver 01:46]: Timed out waiting for "<type 'str'>": [PYBOOT] [beaver 01:47]: got exception: timeout ~$off [PYBOOT] [beaver 01:48]: Done. ======================================================================== Board beaver-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- [ 3.207723] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.214675] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.221191] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.228116] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.233697] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.240300] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.250292] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.260856] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.267470] [drm] No driver support for vblank timestamp query. [ 3.273406] drm drm: No connectors reported connected with modes [ 3.279407] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.298746] Console: switching to colour frame buffer device 128x48 [ 3.310528] drm drm: fb0: frame buffer device [ 3.314966] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.325209] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.331665] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.337070] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.344785] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.358102] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.364433] hub 1-0:1.0: USB hub found [ 3.368196] hub 1-0:1.0: 1 port detected [ 3.372906] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.378321] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.385973] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.398098] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.404359] hub 2-0:1.0: USB hub found [ 3.408116] hub 2-0:1.0: 1 port detected [ 3.415599] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.428492] vdd_sata,avdd_plle: disabling [ 3.432874] usb1_vbus: disabling [ 3.436835] Waiting for root device /dev/mmcblk0p1... [ 3.718106] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.656658] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [PYBOOT] [beaver 01:45]: Timed out waiting for "<type 'str'>": [PYBOOT] [beaver 01:46]: got exception: timeout ~$off [PYBOOT] [beaver 01:47]: Done. ======================================================================== Board beaver-arm-tegra_defconfig failure log: ------------------------------------------------- [ 6.194213] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 6.201255] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.206855] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 6.214370] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 6.224372] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 6.237364] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.243984] [drm] No driver support for vblank timestamp query. [ 6.249987] drm drm: No connectors reported connected with modes [ 6.255996] [drm] Cannot find any crtc or sizes - going 1024x768 [ 6.283115] Console: switching to colour frame buffer device 128x48 [ 6.294908] drm drm: fb0: frame buffer device [ 6.321080] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 6.330407] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 6.336883] tegra-ehci 7d004000.usb: EHCI Host Controller [ 6.342316] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 6.350286] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 6.371084] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 6.378991] hub 1-0:1.0: USB hub found [ 6.382772] hub 1-0:1.0: 1 port detected [ 6.387582] tegra-ehci 7d008000.usb: EHCI Host Controller [ 6.393005] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 6.400890] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 6.421080] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 6.428868] hub 2-0:1.0: USB hub found [ 6.432642] hub 2-0:1.0: 1 port detected [ 6.442268] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 6.460427] vdd_sata,avdd_plle: disabling [ 6.465157] usb1_vbus: disabling [ 6.468563] ALSA device list: [ 6.471572] #0: NVIDIA Tegra Beaver [ 6.475774] Waiting for root device /dev/mmcblk0p1... [ 6.751084] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 7.751949] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [PYBOOT] [beaver 01:42]: Timed out waiting for "<type 'str'>": [PYBOOT] [beaver 01:43]: got exception: timeout ~$off [PYBOOT] [beaver 01:44]: Done. ======================================================================== Board colombus-arm-multi_v7_defconfig failure log: ------------------------------------------------- ======================================================================== Board colombus-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- fifo_size = 0x200 Fastboot entered boot tIRQ: suspend mp/colombus-l6Y4r6IRQ: reset /zImagIRQ: rese3Glgnet Raddress:73, speed:3, bulk_ep_size:512, fifo_size:512 usb enter high speed SetAddress: 73 fastboot_bulk_endpoint_reset usb_base = 0x1c19000 sram_base = 0x1c00000 ccmu_base = 0x1c20000 address = 0x49 speed = 0x3 bulk_ep_size = 0x200 fifo_size = 0x200 (user:build) Load fastboot kernel creating boot image... creating boot image - 6305792 bytes downloading 'boot.img'... download FastBot:Starting download of 6 MB Downloading 0 MB ...Downloading 1 MB ...Downloading 2 MB ...Downloading 3 MB ...Downloading 3 MB ...Downloading 4 MB ...Downloading 5 MB ...OKAY [ 1.772s] booting... downloading of 6 MB finished Downloading 6 MB ...boot OKAY [ 0.002s] finished. total time: 1.777s FASTBOOT DONE Booting raw image.. ## Starting application at 0x41000800 ... [PYBOOT] [colombus 00:55]: Timed out waiting for "<type 'str'>": [PYBOOT] [colombus 00:56]: got exception: timeout ~$off [PYBOOT] [colombus 00:57]: Done. ======================================================================== Board cubox-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- ======================================================================== Board odroidu3-arm-exynos_defconfig failure log: ------------------------------------------------- [ 1.786506] NET: Registered protocol family 10 [ 1.787099] sit: IPv6 over IPv4 tunneling driver [ 1.791789] NET: Registered protocol family 17 [ 1.795062] NET: Registered protocol family 15 [ 1.799531] Key type dns_resolver registered [ 1.803860] Registering SWP/SWPB emulation handler [ 1.811786] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.816417] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.823837] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.830982] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.837562] [drm] No driver support for vblank timestamp query. [ 1.843479] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.849826] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.855029] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.862230] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.871084] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.880780] mmc1: new DDR MMC card at address 0001 [ 1.885906] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.887253] max98090 1-0010: MAX98090 REVID=0x43 [ 1.889548] max98090 1-0010: use default 2.8v micbias [ 1.903258] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.905633] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.909343] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.923444] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.924279] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.930979] mmcblk1: p1 p2 [ 1.942883] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:24 UTC (946688424) [ 1.965291] VDD10_HDMI_1.0V: disabling [ 1.966027] vdd_g3d: disabling [ 1.967103] BUCK8_2.8V: disabling [ 1.971139] ALSA device list: [ 1.972721] #0: Odroid-U3 [ 1.976616] Waiting for root device /dev/mmcblk0p2... [PYBOOT] [odroidu3 01:51]: Timed out waiting for "<type 'str'>": [PYBOOT] [odroidu3 01:52]: got exception: timeout ~$off [PYBOOT] [odroidu3 01:53]: Done. ======================================================================== Board omap5uevm-arm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.920235] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.935499] SMPS6: supplied by vsys_cobra [ 1.936711] mmc0: new high speed MMC card at address 0001 [ 1.945556] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.950423] smps6: Bringing 1350000uV into 1200000-1200000uV [ 1.956409] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.962756] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.970541] SMPS7: supplied by vsys_cobra [ 1.975475] vdds_1v8_main: supplied by smps7 [ 1.980815] SMPS8: supplied by vsys_cobra [ 1.986539] SMPS9: supplied by vsys_cobra [ 1.991038] smps9: Bringing 0uV into 2100000-2100000uV [ 1.999042] LDO1: supplied by vsys_cobra [ 2.003478] ldo1: Bringing 0uV into 1800000-1800000uV [ 2.009879] LDO2: supplied by vsys_cobra [ 2.011214] smsc95xx v1.0.4 [ 2.017216] ldo2: Bringing 0uV into 2800000-2800000uV [ 2.023604] LDO3: supplied by vdds_1v8_main [ 2.029588] LDO4: supplied by vdds_1v8_main [ 2.034300] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.040650] LDO5: supplied by vsys_cobra [ 2.046381] LDO6: supplied by vdds_1v8_main [ 2.053900] LDO7: supplied by vsys_cobra [ 2.058318] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.061489] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, f6:b6:45:0a:51:b2 [ 2.076377] LDO8: supplied by vsys_cobra [ 2.082130] LDO9: supplied by vmmcsd_fixed [ 2.088195] LDOLN: supplied by vsys_cobra [ 2.094045] LDOUSB: supplied by vsys_cobra [ 2.102984] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.127752] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.135437] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 2.143347] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz [PYBOOT] [omap5uevm 02:05]: Timed out waiting for "<type 'str'>": [PYBOOT] [omap5uevm 02:06]: got exception: timeout ~$off [PYBOOT] [omap5uevm 02:07]: Done. ======================================================================== Board omap5uevm-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.275763] 1ea0: 00000000 00000127 ee1860c0 c140e66a c0ef4c68 c0385c68 77359400 c1302510 [ 2.284278] 1ec0: 00000000 c0ef4c90 00000000 ee1860c0 ee186120 00000000 00000001 ee008000 [ 2.292782] 1ee0: fa213000 c140e668 c1302510 c0385d84 ee1860c0 c130aa28 00000000 c0388fb8 [ 2.301292] 1f00: c12134dc 00000000 00000000 c03852e4 c12134dc c0385594 c1302870 c1340638 [ 2.309801] 1f20: fa21200c c1301f50 fa212000 c03017a8 c0308780 a0000013 ffffffff c1301f84 [ 2.318316] 1f40: c1214580 c1302508 c140e668 c030c514 00000001 00000000 ea000013 f0880000 [ 2.326823] 1f60: c1300000 c13024a4 00000000 00000000 c1214580 c1302508 c140e668 c1302510 [ 2.335356] 1f80: 60000013 c1301fa0 c032b014 c0308780 a0000013 ffffffff 00000051 c030877c [ 2.343879] 1fa0: c1300000 c0379278 c1301fb4 c1301fa8 00000000 ffffffff 00000000 c1100c50 [ 2.352388] 1fc0: ffffffff ffffffff 00000000 c1100684 00000000 c11a6a30 c14105d4 c1302480 [ 2.360910] 1fe0: c11a6a2c c13076d4 8020406a 412fc0f2 00000000 8020807c 00000000 00000000 [ 2.369438] [<c03641f0>] (try_to_wake_up) from [<c0385c68>] (handle_irq_event_percpu+0x74/0x14c) [ 2.378599] [<c0385c68>] (handle_irq_event_percpu) from [<c0385d84>] (handle_irq_event+0x44/0x68) [ 2.387837] [<c0385d84>] (handle_irq_event) from [<c0388fb8>] (handle_fasteoi_irq+0xb4/0x194) [ 2.396729] [<c0388fb8>] (handle_fasteoi_irq) from [<c03852e4>] (generic_handle_irq+0x24/0x34) [ 2.405703] [<c03852e4>] (generic_handle_irq) from [<c0385594>] (__handle_domain_irq+0x5c/0xb4) [ 2.414770] [<c0385594>] (__handle_domain_irq) from [<c03017a8>] (gic_handle_irq+0x54/0x98) [ 2.423480] [<c03017a8>] (gic_handle_irq) from [<c030c514>] (__irq_svc+0x54/0x70) [ 2.431269] Exception stack(0xc1301f50 to 0xc1301f98) [ 2.436533] 1f40: 00000001 00000000 ea000013 f0880000 [ 2.445054] 1f60: c1300000 c13024a4 00000000 00000000 c1214580 c1302508 c140e668 c1302510 [ 2.453563] 1f80: 60000013 c1301fa0 c032b014 c0308780 a0000013 ffffffff [ 2.460460] [<c030c514>] (__irq_svc) from [<c0308780>] (arch_cpu_idle+0x20/0x3c) [ 2.468169] [<c0308780>] (arch_cpu_idle) from [<c0379278>] (cpu_startup_entry+0x1bc/0x218) [ 2.476787] [<c0379278>] (cpu_startup_entry) from [<c1100c50>] (start_kernel+0x374/0x380) [ 2.485299] [<c1100c50>] (start_kernel) from [<8020807c>] (0x8020807c) [ 2.492102] Code: e3c21d7f e3c1103f e59f2160 e5910010 (e7931002) [ 2.498455] ---[ end trace cc12e71e275f6e4d ]--- [ 2.503263] Kernel panic - not syncing: Fatal exception in interrupt [ 2.509871] CPU1: stopping [ 2.512686] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 4.7.0-rc7-00145-g2321884 #1 [ 2.5217[ 2.522661] Unable to handle kernel paging request at virtual address 0000fed0 [ 2.522662] pgd = c0204000 [ 2.522665] [0000fed0] *pgd=00000000 [ 2.522668] Internal error: Oops: 5 [#2] SMP ARM [ [PYBOOT] [omap5uevm 00:50]: got exception: panic ~$off [PYBOOT] [omap5uevm 00:51]: Done. ======================================================================== Board pi-arm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.539019] isl29018 7-0044: No cache defaults, reading back from HW [ 1.545373] isl29018 7-0044: Failed to read 1: -6 [ 1.549956] isl29018 7-0044: regmap initialization fails: -6 [ 1.560892] NET: Registered protocol family 10 [ 1.565333] sit: IPv6 over IPv4 tunneling driver [ 1.568914] NET: Registered protocol family 17 [ 1.572916] can: controller area network core (rev 20120528 abi 9) [ 1.579106] NET: Registered protocol family 29 [ 1.583494] can: raw protocol (rev 20120528) [ 1.587743] can: broadcast manager protocol (rev 20120528 t) [ 1.593385] can: netlink gateway (rev 20130117) max_hops=1 [ 1.599111] Key type dns_resolver registered [ 1.603437] ThumbEE CPU extension supported. [ 1.607354] Registering SWP/SWPB emulation handler [ 1.617280] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.622758] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.629125] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.634500] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.644602] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.654958] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.660401] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.670587] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.676767] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.682145] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.691872] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.714292] Waiting for root device /dev/mmcblk0p1... [ 1.718178] mmc0: tuning execution failed: -5 [ 1.722229] mmc0: error -5 whilst initialising MMC card [ 2.583810] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597987] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.603448] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609820] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.615204] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [PYBOOT] [pi 01:58]: Timed out waiting for "<type 'str'>": [PYBOOT] [pi 01:59]: got exception: timeout ~$off [PYBOOT] [pi 02:00]: Done. ======================================================================== Board pi-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.533485] isl29018 7-0044: No cache defaults, reading back from HW [ 1.539838] isl29018 7-0044: Failed to read 1: -6 [ 1.544421] isl29018 7-0044: regmap initialization fails: -6 [ 1.555310] NET: Registered protocol family 10 [ 1.559747] sit: IPv6 over IPv4 tunneling driver [ 1.563323] NET: Registered protocol family 17 [ 1.567329] can: controller area network core (rev 20120528 abi 9) [ 1.573520] NET: Registered protocol family 29 [ 1.577907] can: raw protocol (rev 20120528) [ 1.582157] can: broadcast manager protocol (rev 20120528 t) [ 1.587799] can: netlink gateway (rev 20130117) max_hops=1 [ 1.593525] Key type dns_resolver registered [ 1.597854] ThumbEE CPU extension supported. [ 1.601767] Registering SWP/SWPB emulation handler [ 1.611642] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.617119] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.623486] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.628861] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.638954] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.649290] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.654736] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.664919] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.671102] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.676481] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.686199] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.708501] Waiting for root device /dev/mmcblk0p1... [ 1.712385] mmc0: tuning execution failed: -5 [ 1.716442] mmc0: error -5 whilst initialising MMC card [ 2.583281] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597404] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.602869] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609239] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614623] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [PYBOOT] [pi 01:47]: Timed out waiting for "<type 'str'>": [PYBOOT] [pi 01:48]: got exception: timeout ~$off [PYBOOT] [pi 01:49]: Done. ======================================================================== Board rk3288evb-arm-multi_lpae_defconfig failure log: ------------------------------------------------- ======================================================================== Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

8 years, 5 months

next boot: 620 boots: 31 failed, 582 passed with 5 offline, 2 conflicts (next-20160722)

by kernelci.org bot

next boot: 620 boots: 31 failed, 582 passed with 5 offline, 2 conflicts (next-20160722) Full Boot Summary: https://kernelci.org/boot/all/job/next/kernel/next-20160722/ Full Build Summary: https://kernelci.org/build/next/kernel/next-20160722/ Tree: next Branch: local/master Git Describe: next-20160722 Git Commit: 13123042d0dbf7635f052efc2ae69fd9af624f1d Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git Tested: 110 unique boards, 25 SoC families, 36 builds out of 143 Boot Failures Detected: https://kernelci.org/boot/?next-20160722&fail arm64: defconfig+CONFIG_EXPERT=y+CONFIG_ACPI=y: armada-7040-db: 1 failed lab defconfig+CONFIG_OF_UNITTEST=y: armada-7040-db: 1 failed lab defconfig: apm-mustang-kvm-guest: 1 failed lab apm-mustang-kvm-uefi-guest: 1 failed lab armada-7040-db: 1 failed lab juno-kvm-guest: 1 failed lab juno-kvm-uefi-guest: 1 failed lab arm: mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y: armada-xp-openblocks-ax3-4: 1 failed lab multi_v7_defconfig: armada-xp-openblocks-ax3-4: 1 failed lab bcm4708-smartrg-sr400ac: 1 failed lab omap5-uevm_rootfs:mmc: 1 failed lab omap2plus_defconfig: am335x-pepper: 1 failed lab multi_v7_defconfig+CONFIG_PROVE_LOCKING=y: armada-xp-openblocks-ax3-4: 1 failed lab bcm4708-smartrg-sr400ac: 1 failed lab qcom-apq8074-dragonboard: 1 failed lab qcom-apq8084-ifc6540: 1 failed lab qcom-msm8974-sony-xperia-honami: 1 failed lab sun9i-a80-optimus: 1 failed lab multi_v7_defconfig+CONFIG_ARM_LPAE=y: armada-xp-openblocks-ax3-4: 1 failed lab omap5-uevm_rootfs:mmc: 1 failed lab multi_v7_defconfig+CONFIG_EFI=y: armada-xp-openblocks-ax3-4: 1 failed lab bcm4708-smartrg-sr400ac: 1 failed lab mvebu_v7_defconfig: armada-xp-openblocks-ax3-4: 2 failed labs multi_v7_defconfig+CONFIG_LKDTM=y: armada-xp-openblocks-ax3-4: 1 failed lab bcm4708-smartrg-sr400ac: 1 failed lab exynos5250-snow: 1 failed lab sun9i-a80-optimus: 1 failed lab multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y: armada-xp-openblocks-ax3-4: 1 failed lab multi_v7_defconfig+CONFIG_THUMB2_KERNEL=y+CONFIG_ARM_MODULE_PLTS=y: armada-xp-openblocks-ax3-4: 1 failed lab bcm4708-smartrg-sr400ac: 1 failed lab Offline Platforms: arm: multi_v7_defconfig+CONFIG_EFI=y+CONFIG_ARM_LPAE=y: hip04-d01: 1 offline lab multi_v7_defconfig+CONFIG_EFI=y: hip04-d01: 1 offline lab multi_v7_defconfig: exynos5800-peach-pi: 1 offline lab exynos_defconfig: exynos5800-peach-pi_rootfs:mmc: 1 offline lab multi_v7_defconfig+CONFIG_ARM_LPAE=y: exynos5800-peach-pi_rootfs:mmc: 1 offline lab Conflicting Boot Failures Detected: (These likely are not failures as other labs are reporting PASS. Needs review.) arm: omap2plus_defconfig: am335x-boneblack: lab-cambridge: PASS lab-baylibre-seattle: FAIL lab-baylibre: PASS exynos_defconfig: exynos5250-arndale: lab-cambridge: FAIL lab-baylibre-seattle: PASS --- For more info write to <info(a)kernelci.org>

8 years, 5 months

next build: 143 builds: 4 failed, 139 passed, 5 errors, 154 warnings (next-20160722)

by kernelci.org bot

next build: 143 builds: 4 failed, 139 passed, 5 errors, 154 warnings (next-20160722) Full Build Summary: https://kernelci.org/build/next/kernel/next-20160722/ Tree: next Branch: local/master Git Describe: next-20160722 Git Commit: 13123042d0dbf7635f052efc2ae69fd9af624f1d Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git Built: 3 unique architectures Build Failures Detected: x86: allmodconfig+CONFIG_OF=n: FAIL arm: allmodconfig: FAIL multi_v7_defconfig+CONFIG_SMP=n: FAIL rpc_defconfig: FAIL Errors and Warnings Detected: x86: allmodconfig: 18 warnings allmodconfig+CONFIG_OF=n: 2 errors, 16 warnings defconfig+CONFIG_LKDTM=y: 2 warnings defconfig+CONFIG_OF_UNITTEST=y: 2 warnings defconfig+kvm_guest: 2 warnings i386_defconfig: 2 warnings tinyconfig: 4 warnings x86_64_defconfig: 2 warnings arm64: allmodconfig: 7 warnings defconfig: 2 warnings defconfig+CONFIG_CPU_BIG_ENDIAN=y: 2 warnings defconfig+CONFIG_EXPERT=y+CONFIG_ACPI=y: 2 warnings defconfig+CONFIG_LKDTM=y: 2 warnings defconfig+CONFIG_OF_UNITTEST=y: 2 warnings defconfig+CONFIG_RANDOMIZE_BASE=y: 2 warnings tinyconfig: 2 warnings arm: allmodconfig: 1 error, 8 warnings axm55xx_defconfig: 2 warnings cm_x2xx_defconfig: 2 warnings cns3420vb_defconfig: 2 warnings dove_defconfig: 2 warnings eseries_pxa_defconfig: 2 warnings hisi_defconfig: 2 warnings imx_v4_v5_defconfig: 2 warnings imx_v6_v7_defconfig: 2 warnings iop32x_defconfig: 2 warnings ixp4xx_defconfig: 2 warnings mps2_defconfig: 1 warning multi_v5_defconfig: 2 warnings multi_v7_defconfig: 2 warnings multi_v7_defconfig+CONFIG_ARM_LPAE=y: 2 warnings multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y: 2 warnings multi_v7_defconfig+CONFIG_EFI=y: 2 warnings multi_v7_defconfig+CONFIG_EFI=y+CONFIG_ARM_LPAE=y: 2 warnings multi_v7_defconfig+CONFIG_LKDTM=y: 3 warnings multi_v7_defconfig+CONFIG_PROVE_LOCKING=y: 2 warnings multi_v7_defconfig+CONFIG_SMP=n: 1 error, 2 warnings multi_v7_defconfig+CONFIG_THUMB2_KERNEL=y+CONFIG_ARM_MODULE_PLTS=y: 2 warnings mv78xx0_defconfig: 2 warnings mvebu_v5_defconfig: 2 warnings mvebu_v7_defconfig: 2 warnings mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y: 2 warnings omap2plus_defconfig: 2 warnings orion5x_defconfig: 2 warnings pxa_defconfig: 2 warnings rpc_defconfig: 1 error, 2 warnings shmobile_defconfig: 2 warnings spear13xx_defconfig: 2 warnings sunxi_defconfig: 2 warnings tegra_defconfig: 2 warnings tinyconfig: 3 warnings trizeps4_defconfig: 2 warnings vexpress_defconfig: 2 warnings viper_defconfig: 2 warnings zeus_defconfig: 2 warnings Errors summary: 1 pm-rcar-gen2.c:(.init.text+0x740): undefined reference to `platform_can_secondary_boot' 1 fs/fat/dir.c:758:424: internal compiler error: Segmentation fault 1 drivers/pinctrl/bcm/pinctrl-nsp-mux.c:356:20: error: 'pinconf_generic_dt_node_to_map_group' undeclared here (not in a function) 1 drivers/pinctrl/bcm/pinctrl-cygnus-mux.c:739:20: error: 'pinconf_generic_dt_node_to_map_group' undeclared here (not in a function) 1 ERROR: "dax_do_io" [fs/xfs/xfs.ko] undefined! Warnings summary: 51 drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] 51 drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] 3 WARNING: modpost: missing MODULE_LICENSE() in drivers/dma/xilinx/zynqmp_dma.o 3 Documentation/watchdog/src/watchdog-test.c:94:10: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] 3 Documentation/watchdog/src/watchdog-test.c:38:10: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] 2 net/bluetooth/6lowpan.c:608:570: warning: 'addr_type' may be used uninitialized in this function [-Wmaybe-uninitialized] 2 lib/test_hash.c:234:7: warning: "HAVE_ARCH_HASH_64" is not defined [-Wundef] 2 lib/test_hash.c:229:7: warning: "HAVE_ARCH_HASH_32" is not defined [-Wundef] 2 lib/test_hash.c:224:7: warning: "HAVE_ARCH__HASH_32" is not defined [-Wundef] 2 lib/test_hash.c:146:2: warning: missing braces around initializer [-Wmissing-braces] 2 lib/test_hash.c:146:2: warning: (near initialization for 'hash_or[0]') [-Wmissing-braces] 2 drivers/net/xen-netback/hash.c:127:6: warning: 'val' may be used uninitialized in this function [-Wmaybe-uninitialized] 2 drivers/net/dsa/mv88e6xxx/chip.c:3110:7: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] 2 drivers/misc/mic/scif/scif_dma.c:118:27: warning: parameter 'ep' set but not used [-Wunused-but-set-parameter] 2 drivers/misc/lkdtm_usercopy.c:52:15: warning: 'bad_stack' may be used uninitialized in this function [-Wmaybe-uninitialized] 2 drivers/media/dvb-frontends/cxd2841er.c:3404:569: warning: 'carrier_offset' may be used uninitialized in this function [-Wmaybe-uninitialized] 2 drivers/media/dvb-frontends/cxd2841er.c:3404:552: warning: 'carrier_offset' may be used uninitialized in this function [-Wmaybe-uninitialized] 2 drivers/gpu/drm/nouveau/nvkm/subdev/top/gk104.c:95:90: warning: 'type' may be used uninitialized in this function [-Wmaybe-uninitialized] 2 drivers/gpu/drm/nouveau/nvkm/subdev/top/gk104.c:95:90: warning: 'inst' may be used uninitialized in this function [-Wmaybe-uninitialized] 2 drivers/extcon/extcon.c:418:6: warning: 'idx' may be used uninitialized in this function [-Wmaybe-uninitialized] 2 Warning: objtool: x86 instruction decoder differs from kernel 1 drivers/tty/serial/8250/8250_fintek.c:34:0: warning: "IRQ_MODE" redefined 1 arch/arm/configs/mps2_defconfig:102:warning: symbol value 'y' invalid for PRINTK_TIME 1 .config:976:warning: override: NOHIGHMEM changes choice state 1 .config:975:warning: override: SLOB changes choice state 1 .config:973:warning: override: KERNEL_XZ changes choice state 1 .config:972:warning: override: CC_OPTIMIZE_FOR_SIZE changes choice state 1 .config:950:warning: override: SLOB changes choice state 1 .config:947:warning: override: CC_OPTIMIZE_FOR_SIZE changes choice state 1 .config:878:warning: override: SLOB changes choice state 1 .config:876:warning: override: KERNEL_XZ changes choice state 1 .config:875:warning: override: CC_OPTIMIZE_FOR_SIZE changes choice state ================================================================================ Detailed per-defconfig build reports: -------------------------------------------------------------------------------- acs5k_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- acs5k_tiny_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- allmodconfig (arm) — FAIL, 1 error, 8 warnings, 0 section mismatches Errors: ERROR: "dax_do_io" [fs/xfs/xfs.ko] undefined! Warnings: drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/media/dvb-frontends/cxd2841er.c:3404:552: warning: 'carrier_offset' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/misc/lkdtm_usercopy.c:52:15: warning: 'bad_stack' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/tty/serial/8250/8250_fintek.c:34:0: warning: "IRQ_MODE" redefined Documentation/watchdog/src/watchdog-test.c:94:10: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] Documentation/watchdog/src/watchdog-test.c:38:10: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] WARNING: modpost: missing MODULE_LICENSE() in drivers/dma/xilinx/zynqmp_dma.o -------------------------------------------------------------------------------- allmodconfig (arm64) — PASS, 0 errors, 7 warnings, 0 section mismatches Warnings: drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/media/dvb-frontends/cxd2841er.c:3404:552: warning: 'carrier_offset' may be used uninitialized in this function [-Wmaybe-uninitialized] Documentation/watchdog/src/watchdog-test.c:94:10: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] Documentation/watchdog/src/watchdog-test.c:38:10: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] WARNING: modpost: missing MODULE_LICENSE() in drivers/dma/xilinx/zynqmp_dma.o WARNING: modpost: missing MODULE_LICENSE() in drivers/dma/xilinx/zynqmp_dma.o -------------------------------------------------------------------------------- allmodconfig (x86) — PASS, 0 errors, 18 warnings, 0 section mismatches Warnings: Warning: objtool: x86 instruction decoder differs from kernel drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] net/bluetooth/6lowpan.c:608:570: warning: 'addr_type' may be used uninitialized in this function [-Wmaybe-uninitialized] lib/test_hash.c:224:7: warning: "HAVE_ARCH__HASH_32" is not defined [-Wundef] lib/test_hash.c:229:7: warning: "HAVE_ARCH_HASH_32" is not defined [-Wundef] lib/test_hash.c:234:7: warning: "HAVE_ARCH_HASH_64" is not defined [-Wundef] lib/test_hash.c:146:2: warning: missing braces around initializer [-Wmissing-braces] lib/test_hash.c:146:2: warning: (near initialization for 'hash_or[0]') [-Wmissing-braces] drivers/extcon/extcon.c:418:6: warning: 'idx' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/gpu/drm/nouveau/nvkm/subdev/top/gk104.c:95:90: warning: 'inst' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/gpu/drm/nouveau/nvkm/subdev/top/gk104.c:95:90: warning: 'type' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/media/dvb-frontends/cxd2841er.c:3404:569: warning: 'carrier_offset' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/net/dsa/mv88e6xxx/chip.c:3110:7: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/misc/mic/scif/scif_dma.c:118:27: warning: parameter 'ep' set but not used [-Wunused-but-set-parameter] drivers/net/xen-netback/hash.c:127:6: warning: 'val' may be used uninitialized in this function [-Wmaybe-uninitialized] Documentation/watchdog/src/watchdog-test.c:94:10: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] Documentation/watchdog/src/watchdog-test.c:38:10: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] -------------------------------------------------------------------------------- allmodconfig+CONFIG_OF=n (x86) — FAIL, 2 errors, 16 warnings, 0 section mismatches Errors: drivers/pinctrl/bcm/pinctrl-cygnus-mux.c:739:20: error: 'pinconf_generic_dt_node_to_map_group' undeclared here (not in a function) drivers/pinctrl/bcm/pinctrl-nsp-mux.c:356:20: error: 'pinconf_generic_dt_node_to_map_group' undeclared here (not in a function) Warnings: Warning: objtool: x86 instruction decoder differs from kernel drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] net/bluetooth/6lowpan.c:608:570: warning: 'addr_type' may be used uninitialized in this function [-Wmaybe-uninitialized] lib/test_hash.c:224:7: warning: "HAVE_ARCH__HASH_32" is not defined [-Wundef] lib/test_hash.c:229:7: warning: "HAVE_ARCH_HASH_32" is not defined [-Wundef] lib/test_hash.c:234:7: warning: "HAVE_ARCH_HASH_64" is not defined [-Wundef] lib/test_hash.c:146:2: warning: missing braces around initializer [-Wmissing-braces] lib/test_hash.c:146:2: warning: (near initialization for 'hash_or[0]') [-Wmissing-braces] drivers/extcon/extcon.c:418:6: warning: 'idx' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/gpu/drm/nouveau/nvkm/subdev/top/gk104.c:95:90: warning: 'inst' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/gpu/drm/nouveau/nvkm/subdev/top/gk104.c:95:90: warning: 'type' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/misc/mic/scif/scif_dma.c:118:27: warning: parameter 'ep' set but not used [-Wunused-but-set-parameter] drivers/media/dvb-frontends/cxd2841er.c:3404:569: warning: 'carrier_offset' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/net/dsa/mv88e6xxx/chip.c:3110:7: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/net/xen-netback/hash.c:127:6: warning: 'val' may be used uninitialized in this function [-Wmaybe-uninitialized] -------------------------------------------------------------------------------- allnoconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- allnoconfig (arm64) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- allnoconfig (x86) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- am200epdkit_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- aspeed_g4_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- aspeed_g5_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- assabet_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- at91_dt_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- axm55xx_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] -------------------------------------------------------------------------------- badge4_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- bcm2835_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- cerfcube_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- clps711x_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- cm_x2xx_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] -------------------------------------------------------------------------------- cm_x300_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- cns3420vb_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] -------------------------------------------------------------------------------- colibri_pxa270_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- colibri_pxa300_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- collie_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- corgi_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- davinci_all_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig (arm64) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] -------------------------------------------------------------------------------- defconfig+CONFIG_CPU_BIG_ENDIAN=y (arm64) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] -------------------------------------------------------------------------------- defconfig+CONFIG_EXPERT=y+CONFIG_ACPI=y (arm64) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] -------------------------------------------------------------------------------- defconfig+CONFIG_LKDTM=y (arm64) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] -------------------------------------------------------------------------------- defconfig+CONFIG_LKDTM=y (x86) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] -------------------------------------------------------------------------------- defconfig+CONFIG_OF_UNITTEST=y (arm64) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] -------------------------------------------------------------------------------- defconfig+CONFIG_OF_UNITTEST=y (x86) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] -------------------------------------------------------------------------------- defconfig+CONFIG_RANDOMIZE_BASE=y (arm64) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] -------------------------------------------------------------------------------- defconfig+kvm_guest (x86) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] -------------------------------------------------------------------------------- dove_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] -------------------------------------------------------------------------------- ebsa110_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- efm32_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- em_x270_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- ep93xx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- eseries_pxa_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] -------------------------------------------------------------------------------- exynos_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- ezx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- footbridge_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- h3600_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- h5000_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- hackkit_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- hisi_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] -------------------------------------------------------------------------------- i386_defconfig (x86) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] -------------------------------------------------------------------------------- imote2_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- imx_v4_v5_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] -------------------------------------------------------------------------------- imx_v6_v7_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] -------------------------------------------------------------------------------- integrator_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- iop13xx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- iop32x_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] -------------------------------------------------------------------------------- iop33x_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- ixp4xx_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] -------------------------------------------------------------------------------- jornada720_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- keystone_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- ks8695_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- lart_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- lpc18xx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- lpc32xx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- lpd270_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- lubbock_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- magician_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- mainstone_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- mini2440_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- mmp2_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- moxart_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- mps2_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: arch/arm/configs/mps2_defconfig:102:warning: symbol value 'y' invalid for PRINTK_TIME -------------------------------------------------------------------------------- multi_v4t_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- multi_v5_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] -------------------------------------------------------------------------------- multi_v7_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_ARM_LPAE=y (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_EFI=y (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_EFI=y+CONFIG_ARM_LPAE=y (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_LKDTM=y (arm) — PASS, 0 errors, 3 warnings, 0 section mismatches Warnings: drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/misc/lkdtm_usercopy.c:52:15: warning: 'bad_stack' may be used uninitialized in this function [-Wmaybe-uninitialized] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_PROVE_LOCKING=y (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_SMP=n (arm) — FAIL, 1 error, 2 warnings, 0 section mismatches Errors: pm-rcar-gen2.c:(.init.text+0x740): undefined reference to `platform_can_secondary_boot' Warnings: drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_THUMB2_KERNEL=y+CONFIG_ARM_MODULE_PLTS=y (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] -------------------------------------------------------------------------------- mv78xx0_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] -------------------------------------------------------------------------------- mvebu_v5_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] -------------------------------------------------------------------------------- mvebu_v7_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] -------------------------------------------------------------------------------- mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] -------------------------------------------------------------------------------- mxs_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- neponset_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- netwinder_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- netx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- nhk8815_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- nuc910_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- nuc950_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- nuc960_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- omap1_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- omap2plus_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] -------------------------------------------------------------------------------- orion5x_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] -------------------------------------------------------------------------------- palmz72_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- pcm027_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- pleb_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- prima2_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- pxa168_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- pxa255-idp_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- pxa3xx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- pxa910_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- pxa_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] -------------------------------------------------------------------------------- qcom_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- raumfeld_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- realview_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- rpc_defconfig (arm) — FAIL, 1 error, 2 warnings, 0 section mismatches Errors: fs/fat/dir.c:758:424: internal compiler error: Segmentation fault Warnings: drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] -------------------------------------------------------------------------------- s3c2410_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- s3c6400_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- s5pv210_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- sama5_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- shannon_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- shmobile_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] -------------------------------------------------------------------------------- simpad_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- socfpga_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- spear13xx_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] -------------------------------------------------------------------------------- spear3xx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- spear6xx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- spitz_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- stm32_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- sunxi_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] -------------------------------------------------------------------------------- tct_hammer_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- tegra_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] -------------------------------------------------------------------------------- tinyconfig (arm) — PASS, 0 errors, 3 warnings, 0 section mismatches Warnings: .config:875:warning: override: CC_OPTIMIZE_FOR_SIZE changes choice state .config:876:warning: override: KERNEL_XZ changes choice state .config:878:warning: override: SLOB changes choice state -------------------------------------------------------------------------------- tinyconfig (arm64) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: .config:947:warning: override: CC_OPTIMIZE_FOR_SIZE changes choice state .config:950:warning: override: SLOB changes choice state -------------------------------------------------------------------------------- tinyconfig (x86) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: .config:972:warning: override: CC_OPTIMIZE_FOR_SIZE changes choice state .config:973:warning: override: KERNEL_XZ changes choice state .config:975:warning: override: SLOB changes choice state .config:976:warning: override: NOHIGHMEM changes choice state -------------------------------------------------------------------------------- trizeps4_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] -------------------------------------------------------------------------------- u300_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- u8500_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- versatile_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- versatile_defconfig+CONFIG_OF_UNITTEST=y (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- vexpress_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] -------------------------------------------------------------------------------- vf610m4_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- viper_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] -------------------------------------------------------------------------------- vt8500_v6_v7_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- x86_64_defconfig (x86) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] -------------------------------------------------------------------------------- xcep_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- zeus_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] -------------------------------------------------------------------------------- zx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches --- For more info write to <info(a)kernelci.org>

8 years, 5 months

next-20160722 build: 1 failures 5 warnings (next-20160722)

by Build bot for Mark Brown

Tree/Branch: next-20160722 Git describe: next-20160722 Commit: 13123042d0 Add linux-next specific files for 20160722 Build Time: 86 min 57 sec Passed: 8 / 9 ( 88.89 %) Failed: 1 / 9 ( 11.11 %) Errors: 1 Warnings: 5 Section Mismatches: 0 Failed defconfigs: arm-allmodconfig Errors: arm-allmodconfig ERROR: "dax_do_io" [fs/xfs/xfs.ko] undefined! ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): 3 warnings 0 mismatches : arm64-allmodconfig 2 warnings 0 mismatches : arm-multi_v5_defconfig 2 warnings 0 mismatches : arm-multi_v7_defconfig 2 warnings 0 mismatches : x86_64-defconfig 5 warnings 0 mismatches : arm-allmodconfig 2 warnings 0 mismatches : arm64-defconfig ------------------------------------------------------------------------------- Errors summary: 1 1 ERROR: "dax_do_io" [fs/xfs/xfs.ko] undefined! Warnings Summary: 5 6 ../drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] 6 ../drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] 2 ../include/linux/dynamic_debug.h:134:3: warning: 'carrier_offset' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 ../drivers/tty/serial/8250/8250_fintek.c:34:0: warning: "IRQ_MODE" redefined 1 ../drivers/misc/lkdtm_usercopy.c:52:15: warning: 'bad_stack' may be used uninitialized in this function [-Wmaybe-uninitialized] =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- arm64-allmodconfig : PASS, 0 errors, 3 warnings, 0 section mismatches Warnings: ../drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] ../drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] ../include/linux/dynamic_debug.h:134:3: warning: 'carrier_offset' may be used uninitialized in this function [-Wmaybe-uninitialized] ------------------------------------------------------------------------------- arm-multi_v5_defconfig : PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: ../drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] ../drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] ------------------------------------------------------------------------------- arm-multi_v7_defconfig : PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: ../drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] ../drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] ------------------------------------------------------------------------------- x86_64-defconfig : PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: ../drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] ../drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] ------------------------------------------------------------------------------- arm-allmodconfig : FAIL, 1 errors, 5 warnings, 0 section mismatches Errors: ERROR: "dax_do_io" [fs/xfs/xfs.ko] undefined! Warnings: ../drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] ../drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] ../drivers/misc/lkdtm_usercopy.c:52:15: warning: 'bad_stack' may be used uninitialized in this function [-Wmaybe-uninitialized] ../include/linux/dynamic_debug.h:134:3: warning: 'carrier_offset' may be used uninitialized in this function [-Wmaybe-uninitialized] ../drivers/tty/serial/8250/8250_fintek.c:34:0: warning: "IRQ_MODE" redefined ------------------------------------------------------------------------------- arm64-defconfig : PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: ../drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] ../drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: x86_64-allnoconfig arm64-allnoconfig arm-allnoconfig

8 years, 5 months

next build: 72 warnings 2 failures (next/next-20160722)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next, found at: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch) Topmost commit: 1312304 Add linux-next specific files for 20160722 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next/next-20160722/ Runtime: 8m 56s Passed: 121 Failed: 2 Warnings: 72 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: arm.allmodconfig arm.multi_v7_nosmp_defconfig ------------------------------------------------------------------------------- Errors: arm.allmodconfig: ERROR: "dax_do_io" [fs/xfs/xfs.ko] undefined! arm.multi_v7_nosmp_defconfig: pm-rcar-gen2.c:(.init.text+0x740): undefined reference to `platform_can_secondary_boot' Warnings: 1 drivers/infiniband/core/cma.c:1242:12: warning: 'src_addr_storage.sin_addr.s_addr' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 drivers/tty/serial/8250/8250_fintek.c:34:0: warning: "IRQ_MODE" redefined 2 drivers/media/dvb-frontends/cxd2841er.c:3408:40: warning: 'carrier_offset' may be used uninitialized in this function [-Wmaybe-uninitialized] 34 drivers/ata/libata-scsi.c:3637:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] 34 drivers/ata/libata-scsi.c:3702:28: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses] Section mismatches:

8 years, 5 months

next boot: 31 passed 8 failed (next/next-20160722)

by Olof's autobooter

Full logs are available at http://arm-soc.lixom.net/bootlogs/next/next-20160722/ Failed boards: arndale arm-multi_v7_nosmp_defconfig : BUILD FAILED bbb arm-multi_v7_nosmp_defconfig : BUILD FAILED beagleboard-x15 arm-multi_v7_nosmp_defconfig : BUILD FAILED beaver arm-tegra_defconfig : FAILED 1:44.08 beaver arm-multi_v7_defconfig : FAILED 1:50.42 beaver arm-multi_v7_nosmp_defconfig : BUILD FAILED capri bcm_defconfig : NO BUILD capri arm-multi_v7_nosmp_defconfig : BUILD FAILED colibri-vf61 arm-multi_v7_nosmp_defconfig : BUILD FAILED colombus arm-sunxi_defconfig : FAILED 1:05.50 colombus arm-multi_lpae_defconfig : FAILED 0:58.99 colombus arm-multi_v7_nosmp_defconfig : BUILD FAILED cosmic arm-multi_v7_nosmp_defconfig : BUILD FAILED cubie arm-multi_v7_nosmp_defconfig : BUILD FAILED cubie2 arm-multi_v7_nosmp_defconfig : BUILD FAILED cubox arm-multi_v7_nosmp_defconfig : BUILD FAILED dalmore arm-multi_v7_nosmp_defconfig : BUILD FAILED hummingboard arm-multi_v7_nosmp_defconfig : BUILD FAILED jetsontk1 arm-multi_v7_nosmp_defconfig : BUILD FAILED minnowmax minnowmax_defconfig : NO BUILD omap5uevm arm-multi_v7_defconfig : FAILED 2:06.00 omap5uevm arm-multi_lpae_defconfig : FAILED 0:55.54 omap5uevm arm-multi_v7_nosmp_defconfig : BUILD FAILED pandaes arm-multi_v7_nosmp_defconfig : BUILD FAILED parallella arm-multi_v7_nosmp_defconfig : BUILD FAILED pi arm-multi_v7_nosmp_defconfig : BUILD FAILED pit arm-multi_v7_nosmp_defconfig : BUILD FAILED rk3288evb arm-multi_lpae_defconfig : FAILED 0:01.50 rk3288evb arm-multi_v7_nosmp_defconfig : BUILD FAILED seaboard arm-multi_v7_nosmp_defconfig : BUILD FAILED snow arm-multi_v7_nosmp_defconfig : BUILD FAILED snowball arm-multi_v7_nosmp_defconfig : BUILD FAILED socfpga arm-multi_v7_nosmp_defconfig : BUILD FAILED trimslice arm-multi_v7_nosmp_defconfig : BUILD FAILED wandboard arm-imx_v6_v7_defconfig : FAILED 2:58.30 wandboard arm-multi_v7_nosmp_defconfig : BUILD FAILED Successful boards: apc arm-vt8500_v6_v7_defconfig : passed 1:16.30 arndale arm-exynos_defconfig : passed 1:29.91 arndale arm-multi_v7_defconfig : passed 1:18.29 bbb arm-omap2plus_defconfig : passed 1:44.81 bbb arm-multi_v7_defconfig : passed 1:25.92 beagleboard-x15 arm-omap2plus_defconfig : passed 0:47.14 beagleboard-x15 arm-multi_v7_defconfig : passed 0:45.15 beagleboard-x15 arm-multi_lpae_defconfig : passed 0:48.95 capri arm-multi_v7_defconfig : passed 0:55.58 chitra powerpc-pasemi_defconfig : passed 2:00.58 chitra powerpc-ppc64_defconfig : passed 2:54.76 colombus arm-multi_v7_defconfig : passed 2:53.08 cosmic arm-imx_v6_v7_defconfig : passed 3:19.25 cosmic arm-multi_v7_defconfig : passed 3:00.63 cubie arm-sunxi_defconfig : passed 0:49.06 cubie arm-multi_v7_defconfig : passed 0:49.24 cubie2 arm-sunxi_defconfig : passed 0:50.73 cubie2 arm-multi_v7_defconfig : passed 0:52.45 cubie2 arm-multi_lpae_defconfig : passed 0:53.91 cubox arm-multi_v7_defconfig : passed 1:00.96 dalmore arm-tegra_defconfig : passed 1:25.49 dalmore arm-multi_v7_defconfig : passed 1:23.97 jetsontk1 arm-tegra_defconfig : passed 0:49.35 jetsontk1 arm-multi_v7_defconfig : passed 0:46.79 jetsontk1 arm-multi_lpae_defconfig : passed 0:53.07 omap5uevm arm-omap2plus_defconfig : passed 1:06.78 pandaes arm-omap2plus_defconfig : warnings 1:52.45 parallella arm-multi_v7_defconfig : passed 2:46.18 pi arm-multi_v7_defconfig : passed 2:11.62 seattle arm64-defconfig : warnings 2:29.63 wandboard arm-multi_v7_defconfig : passed 1:19.53 Offline boards: arndale arm-multi_lpae_defconfig : OFFLINE 1:21.32 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:18.56 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:14.35 cubox arm-mvebu_v7_defconfig : OFFLINE 0:28.61 dalmore arm-multi_lpae_defconfig : OFFLINE 2:25.51 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 2:18.38 hummingboard arm-multi_v7_defconfig : OFFLINE 2:14.40 odroidu3 arm-exynos_defconfig : OFFLINE 1:53.48 pandaes arm-multi_v7_defconfig : OFFLINE 0:51.17 pi arm-exynos_defconfig : OFFLINE 0:26.44 pi arm-multi_lpae_defconfig : OFFLINE 0:32.33 pit arm-exynos_defconfig : OFFLINE 0:26.13 pit arm-multi_v7_defconfig : OFFLINE 0:24.19 pit arm-multi_lpae_defconfig : OFFLINE 0:23.65 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:50.49 sama5 arm-sama5_defconfig : OFFLINE 2:15.40 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:22.23 seaboard arm-tegra_defconfig : OFFLINE 2:19.28 seaboard arm-multi_v7_defconfig : OFFLINE 2:13.10 snow arm-exynos_defconfig : OFFLINE 0:37.10 snow arm-multi_v7_defconfig : OFFLINE 0:39.78 snow arm-multi_lpae_defconfig : OFFLINE 0:33.22 snowball arm-u8500_defconfig : OFFLINE 0:31.37 snowball arm-multi_v7_defconfig : OFFLINE 0:29.22 socfpga arm-socfpga_defconfig : OFFLINE 2:21.07 socfpga arm-multi_v7_defconfig : OFFLINE 2:11.47 trimslice arm-tegra_defconfig : OFFLINE 2:20.71 trimslice arm-multi_v7_defconfig : OFFLINE 2:20.96 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board beaver-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.285356] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.291877] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.298828] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.304412] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.311122] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.321114] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.333277] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.339892] [drm] No driver support for vblank timestamp query. [ 3.345834] drm drm: No connectors reported connected with modes [ 3.351840] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.377877] Console: switching to colour frame buffer device 128x48 [ 3.389935] drm drm: fb0: frame buffer device [ 3.408970] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.419687] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.426154] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.431568] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.439404] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.458681] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.465767] hub 1-0:1.0: USB hub found [ 3.469540] hub 1-0:1.0: 1 port detected [ 3.474472] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.479883] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.487624] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.508676] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.515665] hub 2-0:1.0: USB hub found [ 3.519432] hub 2-0:1.0: 1 port detected [ 3.528899] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.542640] vdd_sata,avdd_plle: disabling [ 3.547343] usb1_vbus: disabling [ 3.551441] Waiting for root device /dev/mmcblk0p1... [ 3.853683] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.851093] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [ 37.273680] random: nonblocking pool is initialized [PYBOOT] [beaver 01:47]: Timed out waiting for "<type 'str'>": [PYBOOT] [beaver 01:48]: got exception: timeout ~$off [PYBOOT] [beaver 01:49]: Done. ======================================================================== Board beaver-arm-tegra_defconfig failure log: ------------------------------------------------- [ 7.051334] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 7.056936] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 7.064456] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 7.074458] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 7.087131] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 7.093748] [drm] No driver support for vblank timestamp query. [ 7.099746] drm drm: No connectors reported connected with modes [ 7.105756] [drm] Cannot find any crtc or sizes - going 1024x768 [ 7.131496] Console: switching to colour frame buffer device 128x48 [ 7.143308] drm drm: fb0: frame buffer device [ 7.180843] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 7.189993] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 7.196464] tegra-ehci 7d004000.usb: EHCI Host Controller [ 7.201899] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 7.209859] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 7.240843] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 7.248470] hub 1-0:1.0: USB hub found [ 7.252253] hub 1-0:1.0: 1 port detected [ 7.257043] tegra-ehci 7d008000.usb: EHCI Host Controller [ 7.262466] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 7.270338] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 7.300841] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 7.308312] hub 2-0:1.0: USB hub found [ 7.312085] hub 2-0:1.0: 1 port detected [ 7.320298] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:03 UTC (946684803) [ 7.338537] vdd_sata,avdd_plle: disabling [ 7.343006] usb1_vbus: disabling [ 7.346397] ALSA device list: [ 7.349353] #0: NVIDIA Tegra Beaver [ 7.353598] Waiting for root device /dev/mmcblk0p1... [ 7.670841] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 8.756355] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [PYBOOT] [beaver 01:41]: Timed out waiting for "<type 'str'>": [ 80.371142] random: nonblocking pool is initialized [PYBOOT] [beaver 01:42]: got exception: timeout ~$off [PYBOOT] [beaver 01:43]: Done. ======================================================================== Board colombus-arm-multi_lpae_defconfig failure log: ------------------------------------------------- fifo_size = 0x200 Fastboot entered boot tIRQ: suspend mp/colombus-zxcfuS/zImagewGdpBIRQ: reset _IRQ: reset (user:build) Load fastboot kernel address:122, speed:3, bulk_ep_size:512, fifo_size:512 usb enter high speed SetAddress: 122 fastboot_bulk_endpoint_reset usb_base = 0x1c19000 sram_base = 0x1c00000 ccmu_base = 0x1c20000 address = 0x7a speed = 0x3 bulk_ep_size = 0x200 fifo_size = 0x200 creating boot image... creating boot image - 6486016 bytes downloading 'boot.img'... download FastBot:Starting download of 6 MB Downloading 0 MB ...Downloading 1 MB ...Downloading 2 MB ...Downloading 3 MB ...Downloading 3 MB ...Downloading 4 MB ...Downloading 5 MB ... downloading of 6 MB finished Downloading 6 MB ...boot OKAY [ 1.806s] booting... OKAY [ 0.001s] finished. total time: 1.814s FASTBOOT DONE Booting raw image.. ## Starting application at 0x41000800 ... [PYBOOT] [colombus 00:56]: Timed out waiting for "<type 'str'>": [PYBOOT] [colombus 00:57]: got exception: timeout ~$off [PYBOOT] [colombus 00:58]: Done. ======================================================================== Board colombus-arm-sunxi_defconfig failure log: ------------------------------------------------- fifo_size = 0x200 Fastboot entered boot tmp/colIRQ: suspend ombus-Jga3_w/zImagIRQ: reset el53N1IRQ: reset Raddress:118, speed:3, bulk_ep_size:512, fifo_size:512 usb enter high speed SetAddress: 118 fastboot_bulk_endpoint_reset usb_base = 0x1c19000 sram_base = 0x1c00000 ccmu_base = 0x1c20000 address = 0x76 speed = 0x3 bulk_ep_size = 0x200 fifo_size = 0x200 (user:build) Load fastboot kernel creating boot image... creating boot image - 2643968 bytes downloading 'boot.img'... download FastBot:Starting download of 2 MB Downloading 0 MB ...Downloading 0 MB ...Downloading 0 MB ...Downloading 1 MB ...Downloading 1 MB ...Downloading 1 MB ...Downloading 2 MB ...OKAY [ 0.760s] booting... OKAY [ 0.005s] finished. total time: 0.765s FASTBOOT DONE downloading of 2 MB finished Downloading 2 MB ...boot Booting raw image.. ## Starting application at 0x41000800 ... [PYBOOT] [colombus 01:02]: Timed out waiting for "<type 'str'>": [PYBOOT] [colombus 01:03]: got exception: timeout ~$off [PYBOOT] [colombus 01:05]: Done. ======================================================================== Board omap5uevm-arm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.363605] [<c037a754>] (cpu_startup_entry) from [<c1000c50>] (start_kernel+0x374/0x380) [ 2.372101] [<c1000c50>] (start_kernel) from [<8020807c>] (0x8020807c) [ 2.378881] Code: e594400c e1866005 e3540000 0a00000d (e5943000) [ 2.385212] ---[ end trace 28dc4fe1fd87bf5f ]--- [ 2.390004] Kernel panic - not syncing: Fatal exception in interrupt [ 2.396606] CPU1: stopping [ 2.399415] CPU: 1 PID:[ 2.401679] Unable to handle kernel paging request at virtual address 0000e00c [ 2.401680] pgd = c0204000 [ 2.401683] [0000e00c] *pgd=00000000 [ 2.401686] Internal error: Oops: 5 [#2] SMP ARM [ 2.401688] Modules linked in: [ 2.401692] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 4.7.0-rc7-next-20160722 #1 [ 2.401693] Hardware name: Generic OMAP5 (Flattened Device Tree) [ 2.401695] task: ee0779c0 task.stack: ee09a000 [ 2.401703] PC is at __timer_const_udelay+0x8/0x1c [ 2.401709] LR is at wait_for_xmitr+0x5c/0xd8 [ 2.401712] pc : [<c0595cf4>] lr : [<c06f7158>] psr: 20000193 [ 2.401712] sp : ee09bd88 ip : 00000000 fp : 00000004 [ 2.401714] r10: 00000062 r9 : c0f6e000 r8 : 0000270f [ 2.401716] r7 : 00000005 r6 : 00063f98 r5 : ee2f7410 r4 : 00000000 [ 2.401718] r3 : 0000e000 r2 : 00000002 r1 : 00000020 r0 : c0f6e000 [ 2.401721] Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none [ 2.401723] Control: 10c5387d Table: 8020406a DAC: 00000051 [ 2.401725] Process swapper/1 (pid: 0, stack limit = 0xee09a220) [ 2.401727] Stack: (0xee09bd88 to 0xee09c000) [ 2.401731] bd80: 00000020 ee2f7410 ee2f7410 c06f71d4 00000000 c1314c04 [ 2.401735] bda0: 00000062 c06f71e4 c1314c1f c1314c66 ee2f7410 c06d4620 ee2f7410 00000001 [ 2.401739] bdc0: 60000193 00000001 00000000 c06f72ac 00000001 c12a1ec4 c13146f0 ee09a000 [ 2.401743] bde0: c1315034 00000000 00000062 c06f71fc c13146f0 c0384728 c131c91c 00000062 [ 2.401747] be00: 00000124 00000000 00000124 00000000 000054fc c0385270 00000400 00000052 [ 2.401751] be20: 00000125 00000000 0000000f c13146f0 c1315030 00000000 60000193 c123654c [ 2.401755] be40: c0e6a1f8 00000001 ee09a000 c120243c 00000000 c1314c04 c13146f0 00000052 [ 2.401758] be60: c13146f0 c123654c c1317036 00000000 00000000 00000000 00000000 c0385830 [ 2.401762] be80: 00000000 00000000 00000000 00000000 c1317036 00000052 00000004 00000000 [ 2.401766] bea0: 60000193 00000000 00000000 c1317034 c13146f0 ee077d38 c12062e7 c0e536b8 [ 2.401770] [PYBOOT] [omap5uevm 00:53]: got exception: panic ~$off [PYBOOT] [omap5uevm 00:54]: Done. ======================================================================== Board omap5uevm-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.806950] palmas 0-0048: Irq flag is 0x00000000 [ 1.826346] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 1.837197] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.852486] SMPS6: supplied by vsys_cobra [ 1.857009] smps6: Bringing 1350000uV into 1200000-1200000uV [ 1.864637] SMPS7: supplied by vsys_cobra [ 1.869596] vdds_1v8_main: supplied by smps7 [ 1.874962] SMPS8: supplied by vsys_cobra [ 1.880734] SMPS9: supplied by vsys_cobra [ 1.885247] smps9: Bringing 0uV into 2100000-2100000uV [ 1.891083] mmc0: new high speed MMC card at address 0001 [ 1.897244] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.902149] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.908497] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.916125] LDO1: supplied by vsys_cobra [ 1.920559] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.926899] LDO2: supplied by vsys_cobra [ 1.931323] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.937696] LDO3: supplied by vdds_1v8_main [ 1.943695] LDO4: supplied by vdds_1v8_main [ 1.948378] ldo4: Bringing 0uV into 1800000-1800000uV [ 1.954732] LDO5: supplied by vsys_cobra [ 1.960458] LDO6: supplied by vdds_1v8_main [ 1.967979] LDO7: supplied by vsys_cobra [ 1.972388] ldo7: Bringing 0uV into 2000000-2000000uV [ 1.978749] LDO8: supplied by vsys_cobra [ 1.984486] LDO9: supplied by vmmcsd_fixed [ 1.990551] LDOLN: supplied by vsys_cobra [ 1.996361] LDOUSB: supplied by vsys_cobra [ 2.004645] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.024461] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.032258] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 2.040148] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz[ [PYBOOT] [omap5uevm 02:03]: Timed out waiting for "<type 'str'>": [PYBOOT] [omap5uevm 02:04]: got exception: timeout ~$off [PYBOOT] [omap5uevm 02:05]: Done. ======================================================================== Board rk3288evb-arm-multi_lpae_defconfig failure log: ------------------------------------------------- ======================================================================== Board wandboard-arm-imx_v6_v7_defconfig failure log: ------------------------------------------------- [ 22.670611] mmcblk0: error -110 sending status command, aborting INIT: [ 22.683220] mmcblk0: error -110 sending status command, retrying cannot execute "/sbin/getty"[ 22.691629] mmcblk0: error -110 sending status command, retrying INIT: cannot execute "/sbin/getty"[ 22.700292] mmcblk0: error -110 sending status command, aborting [ 22.716236] mmcblk0: error -110 sending status command, retrying [ 22.724614] mmcblk0: error -110 sending status command, retrying [ 22.732943] mmcblk0: error -110 sending status command, aborting [ 22.743974] mmcblk0: error -110 sending status command, retrying [ 22.752302] mmcblk0: error -110 sending status command, retrying [ 22.760670] mmcblk0: error -110 sending status command, aborting INIT: INIT: cannot execute "/sbin/getty"cannot execute "/sbin/getty" INIT: cannot execute "/sbi[ 22.776002] mmcblk0: error -110 sending status command, retrying n/getty" INIT: Id "S1" respawn[ 22.784739] mmcblk0: error -110 sending status command, retrying ing too fast: disabled for 5 minu[ 22.793620] mmcblk0: error -110 sending status command, aborting tes [ 22.807607] mmcblk0: error -110 sending status command, retrying [ 22.816007] mmcblk0: error -110 sending status command, retrying [ 22.824385] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: Id "3" respawning too fast: [ 22.837009] mmcblk0: error -110 sending status command, retrying disabled for 5 minutes [ 22.848186] mmcblk0: error -110 sending status command, retrying [ 22.856561] mmcblk0: error -110 sending status command, aborting INIT: INIT: cannot execute "/sbin/getty" INIT: Id "4" respawning too fast: disabled for 5 minutes INIT: Id "2" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 48.073812] random: nonblocking pool is initialized [PYBOOT] [wandboard 02:55]: Timed out waiting for "<type 'str'>": [PYBOOT] [wandboard 02:56]: got exception: timeout ~$off [PYBOOT] [wandboard 02:57]: Done.

8 years, 5 months

stable boot: 143 boots: 5 failed, 137 passed with 1 offline (v3.12.62)

by kernelci.org bot

stable boot: 143 boots: 5 failed, 137 passed with 1 offline (v3.12.62) Full Boot Summary: https://kernelci.org/boot/all/job/stable/kernel/v3.12.62/ Full Build Summary: https://kernelci.org/build/stable/kernel/v3.12.62/ Tree: stable Branch: local/linux-3.12.y Git Describe: v3.12.62 Git Commit: a656195aeaa584cd4e8c896e3a54c3bad97bdbb0 Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git Tested: 25 unique boards, 10 SoC families, 24 builds out of 140 Boot Failures Detected: https://kernelci.org/boot/?v3.12.62&fail arm64: defconfig+CONFIG_CPU_BIG_ENDIAN=y: apm-mustang: 1 failed lab arm: multi_v7_defconfig: am335x-boneblack_rootfs:nfs: 3 failed labs sun7i-a20-cubieboard2_rootfs:nfs: 1 failed lab Offline Platforms: arm: sama5_defconfig: sama5d34ek: 1 offline lab --- For more info write to <info(a)kernelci.org>

8 years, 5 months

v3.12.62 build: 0 failures 67 warnings (v3.12.62)

by Build bot for Mark Brown

Tree/Branch: v3.12.62 Git describe: v3.12.62 Commit: a656195aea Linux 3.12.62 Build Time: 30 min 38 sec Passed: 8 / 8 (100.00 %) Failed: 0 / 8 ( 0.00 %) Errors: 0 Warnings: 67 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): 35 warnings 0 mismatches : arm64-allmodconfig 1 warnings 0 mismatches : arm-multi_v7_defconfig 40 warnings 0 mismatches : arm-allmodconfig 1 warnings 0 mismatches : arm64-defconfig ------------------------------------------------------------------------------- Warnings Summary: 67 3 /home/broonie/build/linux-stable/fs/nfs/nfs4proc.c:2925:10: warning: switch condition has boolean value [-Wswitch-bool] 2 /home/broonie/build/linux-stable/include/linux/compiler-gcc.h:136:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] 2 /home/broonie/build/linux-stable/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:941:59: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] 2 /home/broonie/build/linux-stable/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:4052:42: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] 2 /home/broonie/build/linux-stable/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:4043:54: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] 2 /home/broonie/build/linux-stable/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:2629:62: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] 2 /home/broonie/build/linux-stable/drivers/net/ethernet/smsc/smc91x.c:1899:7: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 2 /home/broonie/build/linux-stable/drivers/media/dvb-frontends/stb6100.c:196:22: warning: 'sizeof' on array function parameter 'buf' will return size of 'u8 * {aka unsigned char *}' [-Wsizeof-array-argument] 2 /home/broonie/build/linux-stable/Documentation/misc-devices/mei/mei-amt-version.c:103:5: warning: 'acmd.fd' is used uninitialized in this function [-Wuninitialized] 1 /home/broonie/build/linux-stable/sound/pci/oxygen/oxygen_mixer.c:91:43: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] 1 /home/broonie/build/linux-stable/net/sunrpc/xprtrdma/verbs.c:1774:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/drivers/video/xen-fbfront.c:588:54: warning: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'long long unsigned int' [-Wformat=] 1 /home/broonie/build/linux-stable/drivers/video/omap2/displays-new/panel-sony-acx565akm.c:608:25: warning: unused variable 'ddata' [-Wunused-variable] 1 /home/broonie/build/linux-stable/drivers/video/aty/radeon_pm.c:1718:13: warning: 'radeon_reinitialize_M10' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/usb/storage/realtek_cr.c:699:13: warning: 'fw5895_init' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/usb/storage/realtek_cr.c:629:12: warning: 'config_autodelink_before_power_down' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/tty/serial/efm32-uart.c:834:20: warning: 'efm32_uart_exit' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/staging/wlan-ng/prism2fw.c:795:1: warning: the frame size of 1072 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/drivers/staging/vt6655/iwctl.c:758:1: warning: the frame size of 1280 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/drivers/staging/vt6655/device_main.c:3257:1: warning: the frame size of 1864 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/drivers/staging/sm7xxfb/sm7xxfb.c:117:19: warning: 'sm7xx_vga_setup' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/staging/rts5139/rts51x.c:204:13: warning: 'rts51x_try_to_enter_ss' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/staging/dgnc/dgnc_tty.c:613:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/drivers/staging/dgap/dgap_tty.c:664:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/drivers/staging/dgap/dgap_fep5.c:173:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/drivers/staging/dgap/dgap_fep5.c:112:1: warning: the frame size of 1040 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/drivers/staging/dgap/dgap_driver.c:982:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/drivers/staging/bcm/CmHost.c:1440:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 /home/broonie/build/linux-stable/drivers/staging/bcm/CmHost.c:1426:37: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 /home/broonie/build/linux-stable/drivers/staging/bcm/CmHost.c:1387:39: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 /home/broonie/build/linux-stable/drivers/spi/spi-pl022.c:281:31: warning: large integer implicitly truncated to unsigned type [-Woverflow] 1 /home/broonie/build/linux-stable/drivers/spi/spi-atmel.c:1461:19: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable/drivers/spi/spi-atmel.c:1336:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable/drivers/scsi/ips.c:210:2: warning: #warning "This driver has only been tested on the x86/ia64/x86_64 platforms" [-Wcpp] 1 /home/broonie/build/linux-stable/drivers/scsi/be2iscsi/be_main.c:2981:18: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] 1 /home/broonie/build/linux-stable/drivers/scsi/aic7xxx_old.c:8517:5: warning: case value '257' not in enumerated type 'ahc_chip {aka enum <anonymous>}' [-Wswitch] 1 /home/broonie/build/linux-stable/drivers/scsi/aic7xxx_old.c:8510:5: warning: case value '513' not in enumerated type 'ahc_chip {aka enum <anonymous>}' [-Wswitch] 1 /home/broonie/build/linux-stable/drivers/scsi/aic7xxx_old.c:7901:5: warning: case value '257' not in enumerated type 'ahc_chip {aka enum <anonymous>}' [-Wswitch] 1 /home/broonie/build/linux-stable/drivers/scsi/aic7xxx_old.c:7898:5: warning: case value '513' not in enumerated type 'ahc_chip {aka enum <anonymous>}' [-Wswitch] 1 /home/broonie/build/linux-stable/drivers/regulator/tps62360-regulator.c:363:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable/drivers/power/reset/xgene-reboot.c:80:17: warning: assignment from incompatible pointer type [-Wincompatible-pointer-types] 1 /home/broonie/build/linux-stable/drivers/power/pm2301_charger.c:725:4: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 /home/broonie/build/linux-stable/drivers/power/ab8500_charger.c:1559:4: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 /home/broonie/build/linux-stable/drivers/power/ab8500_charger.c:1390:4: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 /home/broonie/build/linux-stable/drivers/pinctrl/pinctrl-bcm2835.c:1060:2: warning: ignoring return value of 'gpiochip_remove', declared with attribute warn_unused_result [-Wunused-result] 1 /home/broonie/build/linux-stable/drivers/pinctrl/pinctrl-bcm2835.c:1043:3: warning: ignoring return value of 'gpiochip_remove', declared with attribute warn_unused_result [-Wunused-result] 1 /home/broonie/build/linux-stable/drivers/net/wireless/ti/wlcore/spi.c:321:1: warning: the frame size of 9728 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/drivers/net/ethernet/dec/tulip/winbond-840.c:911:2: warning: #warning Processor architecture undefined [-Wcpp] 1 /home/broonie/build/linux-stable/drivers/net/ethernet/amd/nmclan_cs.c:625:3: warning: 'pcmcia_request_exclusive_irq' is deprecated [-Wdeprecated-declarations] 1 /home/broonie/build/linux-stable/drivers/mtd/nand/gpmi-nand/gpmi-nand.c:120:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/mtd/chips/cfi_cmdset_0020.c:654:1: warning: the frame size of 1192 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/drivers/mfd/tps65217.c:173:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable/drivers/mfd/arizona-core.c:509:10: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable/drivers/media/radio/radio-shark2.c:240:13: warning: 'shark_resume_leds' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/media/radio/radio-shark.c:274:13: warning: 'shark_resume_leds' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/input/misc/xen-kbdfront.c:257:54: warning: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'long long unsigned int' [-Wformat=] 1 /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:171:2: warning: #warning Precise timer not defined for this architecture. [-Wcpp] 1 /home/broonie/build/linux-stable/drivers/iio/adc/exynos_adc.c:112:9: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable/drivers/gpio/gpio-mcp23s08.c:643:10: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable/drivers/dma/pl330.c:2317:21: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable/drivers/dma/amba-pl08x.c:1694:3: warning: format '%d' expects argument of type 'int', but argument 6 has type 'size_t {aka long unsigned int}' [-Wformat=] 1 /home/broonie/build/linux-stable/drivers/dma/amba-pl08x.c:1694:3: warning: format '%d' expects argument of type 'int', but argument 5 has type 'size_t {aka long unsigned int}' [-Wformat=] 1 /home/broonie/build/linux-stable/drivers/dma/amba-pl08x.c:1042:5: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'size_t {aka long unsigned int}' [-Wformat=] 1 /home/broonie/build/linux-stable/drivers/ata/pata_hpt366.c:383:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers] 1 /home/broonie/build/linux-stable/drivers/ata/pata_hpt366.c:380:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers] 1 /home/broonie/build/linux-stable/drivers/ata/pata_hpt366.c:377:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers] 1 /home/broonie/build/linux-stable/arch/arm/mach-cns3xxx/pcie.c:350:1: warning: the frame size of 1072 bytes is larger than 1024 bytes [-Wframe-larger-than=] =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- arm64-allmodconfig : PASS, 0 errors, 35 warnings, 0 section mismatches Warnings: /home/broonie/build/linux-stable/drivers/dma/amba-pl08x.c:1042:5: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'size_t {aka long unsigned int}' [-Wformat=] /home/broonie/build/linux-stable/drivers/dma/amba-pl08x.c:1694:3: warning: format '%d' expects argument of type 'int', but argument 5 has type 'size_t {aka long unsigned int}' [-Wformat=] /home/broonie/build/linux-stable/drivers/dma/amba-pl08x.c:1694:3: warning: format '%d' expects argument of type 'int', but argument 6 has type 'size_t {aka long unsigned int}' [-Wformat=] /home/broonie/build/linux-stable/drivers/dma/pl330.c:2317:21: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable/drivers/gpio/gpio-mcp23s08.c:643:10: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable/drivers/iio/adc/exynos_adc.c:112:9: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:171:2: warning: #warning Precise timer not defined for this architecture. [-Wcpp] /home/broonie/build/linux-stable/drivers/input/misc/xen-kbdfront.c:257:54: warning: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'long long unsigned int' [-Wformat=] /home/broonie/build/linux-stable/drivers/mfd/arizona-core.c:509:10: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable/drivers/media/dvb-frontends/stb6100.c:196:22: warning: 'sizeof' on array function parameter 'buf' will return size of 'u8 * {aka unsigned char *}' [-Wsizeof-array-argument] /home/broonie/build/linux-stable/drivers/mfd/tps65217.c:173:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable/drivers/net/ethernet/smsc/smc91x.c:1899:7: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable/drivers/power/reset/xgene-reboot.c:80:17: warning: assignment from incompatible pointer type [-Wincompatible-pointer-types] /home/broonie/build/linux-stable/drivers/media/radio/radio-shark.c:274:13: warning: 'shark_resume_leds' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/media/radio/radio-shark2.c:240:13: warning: 'shark_resume_leds' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/regulator/tps62360-regulator.c:363:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable/fs/nfs/nfs4proc.c:2925:10: warning: switch condition has boolean value [-Wswitch-bool] /home/broonie/build/linux-stable/drivers/spi/spi-atmel.c:1336:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable/drivers/spi/spi-atmel.c:1461:19: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable/drivers/spi/spi-pl022.c:281:31: warning: large integer implicitly truncated to unsigned type [-Woverflow] /home/broonie/build/linux-stable/drivers/staging/bcm/CmHost.c:1387:39: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] /home/broonie/build/linux-stable/drivers/staging/bcm/CmHost.c:1426:37: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] /home/broonie/build/linux-stable/drivers/staging/bcm/CmHost.c:1440:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] /home/broonie/build/linux-stable/drivers/net/wireless/ti/wlcore/spi.c:321:1: warning: the frame size of 9728 bytes is larger than 2048 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/include/linux/compiler-gcc.h:136:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] /home/broonie/build/linux-stable/include/linux/compiler-gcc.h:136:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] /home/broonie/build/linux-stable/drivers/video/xen-fbfront.c:588:54: warning: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'long long unsigned int' [-Wformat=] /home/broonie/build/linux-stable/drivers/usb/storage/realtek_cr.c:629:12: warning: 'config_autodelink_before_power_down' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/usb/storage/realtek_cr.c:699:13: warning: 'fw5895_init' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/staging/rts5139/rts51x.c:204:13: warning: 'rts51x_try_to_enter_ss' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:941:59: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] /home/broonie/build/linux-stable/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:2629:62: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] /home/broonie/build/linux-stable/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:4043:54: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] /home/broonie/build/linux-stable/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:4052:42: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] /home/broonie/build/linux-stable/Documentation/misc-devices/mei/mei-amt-version.c:103:5: warning: 'acmd.fd' is used uninitialized in this function [-Wuninitialized] ------------------------------------------------------------------------------- arm-multi_v7_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: /home/broonie/build/linux-stable/fs/nfs/nfs4proc.c:2925:10: warning: switch condition has boolean value [-Wswitch-bool] ------------------------------------------------------------------------------- arm-allmodconfig : PASS, 0 errors, 40 warnings, 0 section mismatches Warnings: /home/broonie/build/linux-stable/arch/arm/mach-cns3xxx/pcie.c:350:1: warning: the frame size of 1072 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/ata/pata_hpt366.c:377:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers] /home/broonie/build/linux-stable/drivers/ata/pata_hpt366.c:380:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers] /home/broonie/build/linux-stable/drivers/ata/pata_hpt366.c:383:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers] /home/broonie/build/linux-stable/sound/pci/oxygen/oxygen_mixer.c:91:43: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] /home/broonie/build/linux-stable/fs/nfs/nfs4proc.c:2925:10: warning: switch condition has boolean value [-Wswitch-bool] /home/broonie/build/linux-stable/net/sunrpc/xprtrdma/verbs.c:1774:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/media/dvb-frontends/stb6100.c:196:22: warning: 'sizeof' on array function parameter 'buf' will return size of 'u8 * {aka unsigned char *}' [-Wsizeof-array-argument] /home/broonie/build/linux-stable/drivers/mtd/chips/cfi_cmdset_0020.c:654:1: warning: the frame size of 1192 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/mtd/nand/gpmi-nand/gpmi-nand.c:120:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/net/ethernet/amd/nmclan_cs.c:625:3: warning: 'pcmcia_request_exclusive_irq' is deprecated [-Wdeprecated-declarations] /home/broonie/build/linux-stable/drivers/pinctrl/pinctrl-bcm2835.c:1060:2: warning: ignoring return value of 'gpiochip_remove', declared with attribute warn_unused_result [-Wunused-result] /home/broonie/build/linux-stable/drivers/pinctrl/pinctrl-bcm2835.c:1043:3: warning: ignoring return value of 'gpiochip_remove', declared with attribute warn_unused_result [-Wunused-result] /home/broonie/build/linux-stable/drivers/power/ab8500_charger.c:1390:4: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] /home/broonie/build/linux-stable/drivers/power/ab8500_charger.c:1559:4: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] /home/broonie/build/linux-stable/drivers/power/pm2301_charger.c:725:4: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] /home/broonie/build/linux-stable/drivers/net/ethernet/dec/tulip/winbond-840.c:911:2: warning: #warning Processor architecture undefined [-Wcpp] /home/broonie/build/linux-stable/drivers/scsi/be2iscsi/be_main.c:2981:18: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] /home/broonie/build/linux-stable/drivers/tty/serial/efm32-uart.c:834:20: warning: 'efm32_uart_exit' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/staging/dgap/dgap_driver.c:982:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/staging/dgap/dgap_fep5.c:173:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/staging/dgap/dgap_fep5.c:112:1: warning: the frame size of 1040 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/staging/dgap/dgap_tty.c:664:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/staging/dgnc/dgnc_tty.c:613:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/scsi/aic7xxx_old.c:7901:5: warning: case value '257' not in enumerated type 'ahc_chip {aka enum <anonymous>}' [-Wswitch] /home/broonie/build/linux-stable/drivers/scsi/aic7xxx_old.c:7898:5: warning: case value '513' not in enumerated type 'ahc_chip {aka enum <anonymous>}' [-Wswitch] /home/broonie/build/linux-stable/drivers/scsi/aic7xxx_old.c:8517:5: warning: case value '257' not in enumerated type 'ahc_chip {aka enum <anonymous>}' [-Wswitch] /home/broonie/build/linux-stable/drivers/scsi/aic7xxx_old.c:8510:5: warning: case value '513' not in enumerated type 'ahc_chip {aka enum <anonymous>}' [-Wswitch] /home/broonie/build/linux-stable/drivers/scsi/ips.c:210:2: warning: #warning "This driver has only been tested on the x86/ia64/x86_64 platforms" [-Wcpp] /home/broonie/build/linux-stable/drivers/video/aty/radeon_pm.c:1718:13: warning: 'radeon_reinitialize_M10' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/video/omap2/displays-new/panel-sony-acx565akm.c:608:25: warning: unused variable 'ddata' [-Wunused-variable] /home/broonie/build/linux-stable/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:941:59: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] /home/broonie/build/linux-stable/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:2629:62: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] /home/broonie/build/linux-stable/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:4043:54: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] /home/broonie/build/linux-stable/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:4052:42: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] /home/broonie/build/linux-stable/drivers/staging/sm7xxfb/sm7xxfb.c:117:19: warning: 'sm7xx_vga_setup' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/staging/vt6655/device_main.c:3257:1: warning: the frame size of 1864 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/staging/vt6655/iwctl.c:758:1: warning: the frame size of 1280 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/staging/wlan-ng/prism2fw.c:795:1: warning: the frame size of 1072 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/Documentation/misc-devices/mei/mei-amt-version.c:103:5: warning: 'acmd.fd' is used uninitialized in this function [-Wuninitialized] ------------------------------------------------------------------------------- arm64-defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: /home/broonie/build/linux-stable/drivers/net/ethernet/smsc/smc91x.c:1899:7: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: x86_64-allnoconfig arm64-allnoconfig arm-allnoconfig x86_64-defconfig

8 years, 5 months

← Newer
1
...
18
19
20
21
22
23
24
...
50
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports July 2016