Kernel-build-reports March 2017

kernel-build-reports@lists.linaro.org

27 participants
428 discussions

v4.1.39-rt47 build: 1 failures 46 warnings (v4.1.39-rt47)

by Build bot for Mark Brown

Tree/Branch: v4.1.39-rt47 Git describe: v4.1.39-rt47 Commit: 88627797be Linux 4.1.39-rt47 Build Time: 64 min 0 sec Passed: 8 / 9 ( 88.89 %) Failed: 1 / 9 ( 11.11 %) Errors: 1 Warnings: 46 Section Mismatches: 1 Failed defconfigs: arm-allmodconfig Errors: arm-allmodconfig ERROR: "handle_bad_irq" [drivers/gpio/gpio-omap.ko] undefined! ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): 36 warnings 3 mismatches : arm64-allmodconfig 4 warnings 0 mismatches : arm-multi_v5_defconfig 5 warnings 0 mismatches : arm-multi_v7_defconfig 3 warnings 0 mismatches : x86_64-defconfig 31 warnings 0 mismatches : arm-allmodconfig 2 warnings 0 mismatches : arm64-defconfig ------------------------------------------------------------------------------- Errors summary: 1 1 ERROR: "handle_bad_irq" [drivers/gpio/gpio-omap.ko] undefined! Warnings Summary: 46 8 ../include/linux/kernel.h:729:17: warning: comparison of distinct pointer types lacks a cast 6 ../net/ipv6/ip6_offload.c:261:25: warning: 'sit_gro_receive' defined but not used [-Wunused-function] 6 ../net/core/dev.c:2930:1: warning: no return statement in function returning non-void [-Wreturn-type] 6 ../arch/arm/include/asm/kmap_types.h:7:0: warning: "KM_TYPE_NR" redefined 4 ../include/linux/blkdev.h:625:26: warning: switch condition has boolean value [-Wswitch-bool] 2 ../sound/pci/oxygen/oxygen_mixer.c:91:43: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] 2 ../drivers/scsi/qla2xxx/qla_target.c:3086:6: warning: format '%llu' expects argument of type 'long long unsigned int', but argument 8 has type 'uint32_t {aka unsigned int}' [-Wformat=] 2 ../drivers/scsi/qla2xxx/qla_target.c:3083:17: warning: unused variable 'se_cmd' [-Wunused-variable] 2 ../drivers/scsi/ips.c:210:2: warning: #warning "This driver has only been tested on the x86/ia64/x86_64 platforms" [-Wcpp] 2 ../drivers/scsi/be2iscsi/be_main.c:3168:18: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] 2 ../drivers/media/platform/s3c-camif/camif-capture.c:134:10: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] 2 ../drivers/media/platform/s3c-camif/camif-capture.c:118:10: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] 2 ../drivers/ata/pata_hpt366.c:382:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers] 2 ../drivers/ata/pata_hpt366.c:379:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers] 2 ../drivers/ata/pata_hpt366.c:376:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers] 1 ../net/caif/cfpkt_skbuff.c:286:3: warning: this 'else' clause does not guard... [-Wmisleading-indentation] 1 ../include/trace/ftrace.h:28:0: warning: "TRACE_SYSTEM_STRING" redefined 1 ../include/linux/spinlock.h:256:3: warning: 'flags' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 ../drivers/usb/renesas_usbhs/common.c:492:25: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 ../drivers/staging/rtl8723au/core/rtw_wlan_util.c:525:2: warning: this 'else' clause does not guard... [-Wmisleading-indentation] 1 ../drivers/staging/iio/adc/ad7192.c:238:3: warning: this 'else' clause does not guard... [-Wmisleading-indentation] 1 ../drivers/scsi/megaraid/megaraid_sas_fusion.c:1723:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 1 ../drivers/scsi/bfa/bfa_ioc.c:3673:4: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 1 ../drivers/scsi/bfa/bfa_ioc.c:3665:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 1 ../drivers/rtc/rtc-pcf8563.c:444:5: warning: 'alm_pending' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 ../drivers/rtc/rtc-armada38x.c:91:22: warning: unused variable 'flags' [-Wunused-variable] 1 ../drivers/net/wireless/iwlegacy/3945.c:1022:5: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses] 1 ../drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c:1478:8: warning: 'skb' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 ../drivers/net/ethernet/dec/tulip/winbond-840.c:910:2: warning: #warning Processor architecture undefined [-Wcpp] 1 ../drivers/net/ethernet/dec/tulip/uli526x.c:1086:4: warning: this 'else' clause does not guard... [-Wmisleading-indentation] 1 ../drivers/net/ethernet/dec/tulip/tulip_core.c:101:2: warning: #warning Processor architecture undefined! [-Wcpp] 1 ../drivers/mtd/mtd_blkdevs.c:100:2: warning: switch condition has boolean value [-Wswitch-bool] 1 ../drivers/mmc/host/sh_mmcif.c:402:4: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 ../drivers/mmc/host/sh_mmcif.c:401:4: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 ../drivers/media/platform/coda/./trace.h:12:0: warning: "TRACE_SYSTEM_STRING" redefined 1 ../drivers/media/platform/am437x/am437x-vpfe.c:1723:27: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 ../drivers/infiniband/hw/qib/qib_qp.c:44:0: warning: "BITS_PER_PAGE" redefined 1 ../drivers/infiniband/hw/cxgb4/mem.c:147:20: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 ../drivers/gpu/drm/nouveau/nvkm/engine/gr/ctxgm204.c:975:1: warning: the frame size of 1192 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 ../drivers/gpio/gpio-74xx-mmio.c:132:16: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 ../drivers/block/drbd/drbd_bitmap.c:483:0: warning: "BITS_PER_PAGE_MASK" redefined 1 ../drivers/block/drbd/drbd_bitmap.c:482:0: warning: "BITS_PER_PAGE" redefined 1 ../drivers/atm/iphase.c:1176:12: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 1 ../arch/x86/kernel/cpu/mcheck/therm_throt.c:389:3: warning: right shift count >= width of type 1 ../arch/arm/mach-cns3xxx/pcie.c:266:1: warning: the frame size of 1088 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 ../arch/arm/include/asm/cmpxchg.h:207:3: warning: value computed is not used [-Wunused-value] Section Mismatch Summary: 1 3 WARNING: drivers/staging/fsl-mc/bus/mc-bus-driver.o(.init.text+0x164): Section mismatch in reference from the function init_module() to the function .exit.text:dprc_driver_exit() =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- arm64-allmodconfig : PASS, 0 errors, 36 warnings, 3 section mismatches Warnings: ../drivers/ata/pata_hpt366.c:376:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers] ../drivers/ata/pata_hpt366.c:379:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers] ../drivers/ata/pata_hpt366.c:382:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers] ../drivers/atm/iphase.c:1176:12: warning: this 'if' clause does not guard... [-Wmisleading-indentation] ../net/caif/cfpkt_skbuff.c:286:3: warning: this 'else' clause does not guard... [-Wmisleading-indentation] ../net/core/dev.c:2930:1: warning: no return statement in function returning non-void [-Wreturn-type] ../sound/pci/oxygen/oxygen_mixer.c:91:43: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] ../drivers/block/drbd/drbd_bitmap.c:482:0: warning: "BITS_PER_PAGE" redefined ../drivers/block/drbd/drbd_bitmap.c:483:0: warning: "BITS_PER_PAGE_MASK" redefined ../drivers/gpio/gpio-74xx-mmio.c:132:16: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] ../net/ipv6/ip6_offload.c:261:25: warning: 'sit_gro_receive' defined but not used [-Wunused-function] ../drivers/infiniband/hw/qib/qib_qp.c:44:0: warning: "BITS_PER_PAGE" redefined ../drivers/mmc/host/sh_mmcif.c:401:4: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] ../drivers/mmc/host/sh_mmcif.c:402:4: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] ../drivers/mtd/mtd_blkdevs.c:100:2: warning: switch condition has boolean value [-Wswitch-bool] ../drivers/scsi/be2iscsi/be_main.c:3168:18: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] ../drivers/scsi/bfa/bfa_ioc.c:3665:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation] ../drivers/scsi/bfa/bfa_ioc.c:3673:4: warning: this 'if' clause does not guard... [-Wmisleading-indentation] ../drivers/net/ethernet/dec/tulip/winbond-840.c:910:2: warning: #warning Processor architecture undefined [-Wcpp] ../drivers/net/ethernet/dec/tulip/tulip_core.c:101:2: warning: #warning Processor architecture undefined! [-Wcpp] ../drivers/net/ethernet/dec/tulip/uli526x.c:1086:4: warning: this 'else' clause does not guard... [-Wmisleading-indentation] ../drivers/media/platform/am437x/am437x-vpfe.c:1723:27: warning: self-comparison always evaluates to true [-Wtautological-compare] ../drivers/staging/iio/adc/ad7192.c:238:3: warning: this 'else' clause does not guard... [-Wmisleading-indentation] ../drivers/media/platform/s3c-camif/camif-capture.c:118:10: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] ../drivers/media/platform/s3c-camif/camif-capture.c:134:10: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] ../drivers/scsi/megaraid/megaraid_sas_fusion.c:1723:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation] ../drivers/scsi/qla2xxx/qla_target.c:3086:6: warning: format '%llu' expects argument of type 'long long unsigned int', but argument 8 has type 'uint32_t {aka unsigned int}' [-Wformat=] ../drivers/scsi/qla2xxx/qla_target.c:3083:17: warning: unused variable 'se_cmd' [-Wunused-variable] ../drivers/scsi/ips.c:210:2: warning: #warning "This driver has only been tested on the x86/ia64/x86_64 platforms" [-Wcpp] ../drivers/net/wireless/iwlegacy/3945.c:1022:5: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses] ../drivers/staging/rtl8723au/core/rtw_wlan_util.c:525:2: warning: this 'else' clause does not guard... [-Wmisleading-indentation] ../include/linux/kernel.h:729:17: warning: comparison of distinct pointer types lacks a cast ../include/linux/kernel.h:729:17: warning: comparison of distinct pointer types lacks a cast ../include/linux/kernel.h:729:17: warning: comparison of distinct pointer types lacks a cast ../include/linux/kernel.h:729:17: warning: comparison of distinct pointer types lacks a cast ../drivers/usb/renesas_usbhs/common.c:492:25: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] Section Mismatches: WARNING: drivers/staging/fsl-mc/bus/mc-bus-driver.o(.init.text+0x164): Section mismatch in reference from the function init_module() to the function .exit.text:dprc_driver_exit() WARNING: drivers/staging/fsl-mc/bus/mc-bus-driver.o(.init.text+0x164): Section mismatch in reference from the function init_module() to the function .exit.text:dprc_driver_exit() WARNING: drivers/staging/fsl-mc/bus/mc-bus-driver.o(.init.text+0x164): Section mismatch in reference from the function init_module() to the function .exit.text:dprc_driver_exit() ------------------------------------------------------------------------------- arm-multi_v5_defconfig : PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: ../net/core/dev.c:2930:1: warning: no return statement in function returning non-void [-Wreturn-type] ../include/linux/blkdev.h:625:26: warning: switch condition has boolean value [-Wswitch-bool] ../net/ipv6/ip6_offload.c:261:25: warning: 'sit_gro_receive' defined but not used [-Wunused-function] ../drivers/rtc/rtc-pcf8563.c:444:5: warning: 'alm_pending' may be used uninitialized in this function [-Wmaybe-uninitialized] ------------------------------------------------------------------------------- arm-multi_v7_defconfig : PASS, 0 errors, 5 warnings, 0 section mismatches Warnings: ../net/core/dev.c:2930:1: warning: no return statement in function returning non-void [-Wreturn-type] ../net/ipv6/ip6_offload.c:261:25: warning: 'sit_gro_receive' defined but not used [-Wunused-function] ../include/linux/blkdev.h:625:26: warning: switch condition has boolean value [-Wswitch-bool] ../drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c:1478:8: warning: 'skb' may be used uninitialized in this function [-Wmaybe-uninitialized] ../include/linux/spinlock.h:256:3: warning: 'flags' may be used uninitialized in this function [-Wmaybe-uninitialized] ------------------------------------------------------------------------------- x86_64-defconfig : PASS, 0 errors, 3 warnings, 0 section mismatches Warnings: ../arch/x86/kernel/cpu/mcheck/therm_throt.c:389:3: warning: right shift count >= width of type ../net/core/dev.c:2930:1: warning: no return statement in function returning non-void [-Wreturn-type] ../net/ipv6/ip6_offload.c:261:25: warning: 'sit_gro_receive' defined but not used [-Wunused-function] ------------------------------------------------------------------------------- arm-allmodconfig : FAIL, 1 errors, 31 warnings, 0 section mismatches Errors: ERROR: "handle_bad_irq" [drivers/gpio/gpio-omap.ko] undefined! Warnings: ../arch/arm/mach-cns3xxx/pcie.c:266:1: warning: the frame size of 1088 bytes is larger than 1024 bytes [-Wframe-larger-than=] ../drivers/ata/pata_hpt366.c:376:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers] ../drivers/ata/pata_hpt366.c:379:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers] ../drivers/ata/pata_hpt366.c:382:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers] ../arch/arm/include/asm/cmpxchg.h:207:3: warning: value computed is not used [-Wunused-value] ../net/core/dev.c:2930:1: warning: no return statement in function returning non-void [-Wreturn-type] ../include/linux/blkdev.h:625:26: warning: switch condition has boolean value [-Wswitch-bool] ../sound/pci/oxygen/oxygen_mixer.c:91:43: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] ../net/ipv6/ip6_offload.c:261:25: warning: 'sit_gro_receive' defined but not used [-Wunused-function] ../drivers/gpu/drm/nouveau/nvkm/engine/gr/ctxgm204.c:975:1: warning: the frame size of 1192 bytes is larger than 1024 bytes [-Wframe-larger-than=] ../drivers/infiniband/hw/cxgb4/mem.c:147:20: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] ../arch/arm/include/asm/kmap_types.h:7:0: warning: "KM_TYPE_NR" redefined ../include/linux/blkdev.h:625:26: warning: switch condition has boolean value [-Wswitch-bool] ../include/trace/ftrace.h:28:0: warning: "TRACE_SYSTEM_STRING" redefined ../drivers/media/platform/coda/./trace.h:12:0: warning: "TRACE_SYSTEM_STRING" redefined ../drivers/media/platform/s3c-camif/camif-capture.c:118:10: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] ../drivers/media/platform/s3c-camif/camif-capture.c:134:10: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] ../drivers/rtc/rtc-armada38x.c:91:22: warning: unused variable 'flags' [-Wunused-variable] ../arch/arm/include/asm/kmap_types.h:7:0: warning: "KM_TYPE_NR" redefined ../arch/arm/include/asm/kmap_types.h:7:0: warning: "KM_TYPE_NR" redefined ../arch/arm/include/asm/kmap_types.h:7:0: warning: "KM_TYPE_NR" redefined ../arch/arm/include/asm/kmap_types.h:7:0: warning: "KM_TYPE_NR" redefined ../arch/arm/include/asm/kmap_types.h:7:0: warning: "KM_TYPE_NR" redefined ../drivers/scsi/be2iscsi/be_main.c:3168:18: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] ../drivers/scsi/qla2xxx/qla_target.c:3086:6: warning: format '%llu' expects argument of type 'long long unsigned int', but argument 8 has type 'uint32_t {aka unsigned int}' [-Wformat=] ../drivers/scsi/qla2xxx/qla_target.c:3083:17: warning: unused variable 'se_cmd' [-Wunused-variable] ../drivers/scsi/ips.c:210:2: warning: #warning "This driver has only been tested on the x86/ia64/x86_64 platforms" [-Wcpp] ../include/linux/kernel.h:729:17: warning: comparison of distinct pointer types lacks a cast ../include/linux/kernel.h:729:17: warning: comparison of distinct pointer types lacks a cast ../include/linux/kernel.h:729:17: warning: comparison of distinct pointer types lacks a cast ../include/linux/kernel.h:729:17: warning: comparison of distinct pointer types lacks a cast ------------------------------------------------------------------------------- arm64-defconfig : PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: ../net/core/dev.c:2930:1: warning: no return statement in function returning non-void [-Wreturn-type] ../net/ipv6/ip6_offload.c:261:25: warning: 'sit_gro_receive' defined but not used [-Wunused-function] ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: x86_64-allnoconfig arm64-allnoconfig arm-allnoconfig

7 years, 9 months

master build: 0 failures 3 warnings (v4.11-rc2-235-gd528ae0)

by Build bot for Mark Brown

Tree/Branch: master Git describe: v4.11-rc2-235-gd528ae0 Commit: d528ae0d3d Merge branch 'akpm' (patches from Andrew) Build Time: 184 min 40 sec Passed: 10 / 10 (100.00 %) Failed: 0 / 10 ( 0.00 %) Errors: 0 Warnings: 3 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): 1 warnings 0 mismatches : arm64-allnoconfig 2 warnings 0 mismatches : arm64-allmodconfig 2 warnings 0 mismatches : arm-multi_v5_defconfig 2 warnings 0 mismatches : arm-multi_v7_defconfig 4 warnings 0 mismatches : arm-allmodconfig 1 warnings 0 mismatches : arm-allnoconfig 1 warnings 0 mismatches : arm-multi_v4t_defconfig 2 warnings 0 mismatches : arm64-defconfig ------------------------------------------------------------------------------- Warnings Summary: 3 13 <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] 1 ../include/linux/device.h:1478:15: warning: passing argument 1 of 'platform_driver_unregister' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] 1 ../include/linux/device.h:1473:20: warning: passing argument 1 of '__platform_driver_register' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- arm64-allnoconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] ------------------------------------------------------------------------------- arm64-allmodconfig : PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] ------------------------------------------------------------------------------- arm-multi_v5_defconfig : PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] ------------------------------------------------------------------------------- arm-multi_v7_defconfig : PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] ------------------------------------------------------------------------------- arm-allmodconfig : PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] ../include/linux/device.h:1473:20: warning: passing argument 1 of '__platform_driver_register' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] ../include/linux/device.h:1478:15: warning: passing argument 1 of 'platform_driver_unregister' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] ------------------------------------------------------------------------------- arm-allnoconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] ------------------------------------------------------------------------------- arm-multi_v4t_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] ------------------------------------------------------------------------------- arm64-defconfig : PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: x86_64-allnoconfig x86_64-defconfig

7 years, 9 months

v4.4.53-rt66 build: 0 failures 0 warnings (v4.4.53-rt66)

by Build bot for Mark Brown

Tree/Branch: v4.4.53-rt66 Git describe: v4.4.53-rt66 Commit: 9b77e859b2 Linux 4.4.53-rt66 Build Time: 152 min 18 sec Passed: 9 / 9 (100.00 %) Failed: 0 / 9 ( 0.00 %) Errors: 0 Warnings: 0 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): ------------------------------------------------------------------------------- =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: arm64-allnoconfig arm64-allmodconfig arm-multi_v5_defconfig arm-multi_v7_defconfig x86_64-defconfig arm-allmodconfig arm-allnoconfig x86_64-allnoconfig arm64-defconfig close failed in file object destructor: sys.excepthook is missing lost sys.stderr

7 years, 9 months

stable build: 37 builds: 10 failed, 27 passed, 1408 errors, 210 warnings (v3.16.42)

by kernelci.org bot

stable build: 37 builds: 10 failed, 27 passed, 1408 errors, 210 warnings (v3.16.42) Full Build Summary: https://kernelci.org/build/stable/kernel/v3.16.42/ Tree: stable Branch: local/linux-3.16.y Git Describe: v3.16.42 Git Commit: 65be6fa1da9eb665ae50b2d52bc450e64cbc4ec0 Git URL: http://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git Built: 4 unique architectures Build Failures Detected: mips: gcc version 6.3.0 (GCC) allnoconfig: FAIL gpr_defconfig: FAIL rb532_defconfig: FAIL rt305x_defconfig: FAIL sb1250_swarm_defconfig: FAIL sead3_defconfig: FAIL tb0219_defconfig: FAIL tb0226_defconfig: FAIL tb0287_defconfig: FAIL workpad_defconfig: FAIL Errors and Warnings Detected: arm64: gcc version 5.3.1 20160412 (Linaro GCC 5.3-2016.05) defconfig: 5 warnings defconfig+CONFIG_LKDTM=y: 5 warnings arm: gcc version 5.3.1 20160412 (Linaro GCC 5.3-2016.05) at91sam9g45_defconfig: 2 warnings at91x40_defconfig: 3 warnings badge4_defconfig: 3 warnings cm_x300_defconfig: 4 warnings colibri_pxa270_defconfig: 4 warnings collie_defconfig: 3 warnings davinci_all_defconfig: 3 warnings h5000_defconfig: 3 warnings hi3xxx_defconfig: 3 warnings iop32x_defconfig: 3 warnings keystone_defconfig: 3 warnings mackerel_defconfig: 4 warnings multi_v7_defconfig+CONFIG_EFI=y+CONFIG_ARM_LPAE=y: 7 warnings mvebu_v7_defconfig: 2 warnings nhk8815_defconfig: 3 warnings nuc910_defconfig: 3 warnings nuc950_defconfig: 3 warnings s3c2410_defconfig: 3 warnings spear6xx_defconfig: 3 warnings u300_defconfig: 2 warnings versatile_defconfig: 3 warnings versatile_defconfig+CONFIG_OF_UNITTEST=y: 3 warnings mips: gcc version 6.3.0 (GCC) allnoconfig: 96 errors, 3 warnings gpr_defconfig: 112 errors, 6 warnings rb532_defconfig: 112 errors, 4 warnings rt305x_defconfig: 224 errors, 4 warnings sb1250_swarm_defconfig: 256 errors, 10 warnings sead3_defconfig: 224 errors, 4 warnings tb0219_defconfig: 96 errors, 3 warnings tb0226_defconfig: 96 errors, 4 warnings tb0287_defconfig: 96 errors, 4 warnings workpad_defconfig: 96 errors, 4 warnings x86: gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) allmodconfig+CONFIG_OF=n: 77 warnings allnoconfig: 2 warnings x86_64_defconfig: 5 warnings Errors summary: 9 arch/mips/kernel/r4k_fpu.S:83: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f30,272+240($4)' 9 arch/mips/kernel/r4k_fpu.S:82: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f28,272+224($4)' 9 arch/mips/kernel/r4k_fpu.S:81: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f26,272+208($4)' 9 arch/mips/kernel/r4k_fpu.S:80: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f24,272+192($4)' 9 arch/mips/kernel/r4k_fpu.S:79: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f22,272+176($4)' 9 arch/mips/kernel/r4k_fpu.S:78: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f20,272+160($4)' 9 arch/mips/kernel/r4k_fpu.S:77: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f18,272+144($4)' 9 arch/mips/kernel/r4k_fpu.S:76: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f16,272+128($4)' 9 arch/mips/kernel/r4k_fpu.S:75: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f14,272+112($4)' 9 arch/mips/kernel/r4k_fpu.S:74: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f12,272+96($4)' 9 arch/mips/kernel/r4k_fpu.S:73: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f10,272+80($4)' 9 arch/mips/kernel/r4k_fpu.S:72: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f8,272+64($4)' 9 arch/mips/kernel/r4k_fpu.S:71: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f6,272+48($4)' 9 arch/mips/kernel/r4k_fpu.S:70: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f4,272+32($4)' 9 arch/mips/kernel/r4k_fpu.S:69: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f2,272+16($4)' 9 arch/mips/kernel/r4k_fpu.S:68: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f0,272+0($4)' 9 arch/mips/kernel/r4k_fpu.S:193: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f30,272+240($4)' 9 arch/mips/kernel/r4k_fpu.S:192: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f28,272+224($4)' 9 arch/mips/kernel/r4k_fpu.S:191: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f26,272+208($4)' 9 arch/mips/kernel/r4k_fpu.S:190: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f24,272+192($4)' 9 arch/mips/kernel/r4k_fpu.S:189: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f22,272+176($4)' 9 arch/mips/kernel/r4k_fpu.S:188: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f20,272+160($4)' 9 arch/mips/kernel/r4k_fpu.S:187: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f18,272+144($4)' 9 arch/mips/kernel/r4k_fpu.S:186: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f16,272+128($4)' 9 arch/mips/kernel/r4k_fpu.S:185: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f14,272+112($4)' 9 arch/mips/kernel/r4k_fpu.S:184: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f12,272+96($4)' 9 arch/mips/kernel/r4k_fpu.S:183: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f10,272+80($4)' 9 arch/mips/kernel/r4k_fpu.S:182: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f8,272+64($4)' 9 arch/mips/kernel/r4k_fpu.S:181: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f6,272+48($4)' 9 arch/mips/kernel/r4k_fpu.S:180: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f4,272+32($4)' 9 arch/mips/kernel/r4k_fpu.S:179: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f2,272+16($4)' 9 arch/mips/kernel/r4k_fpu.S:178: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f0,272+0($4)' 5 arch/mips/kernel/r4k_switch.S:283: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f30' 5 arch/mips/kernel/r4k_switch.S:282: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f28' 5 arch/mips/kernel/r4k_switch.S:281: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f26' 5 arch/mips/kernel/r4k_switch.S:280: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f24' 5 arch/mips/kernel/r4k_switch.S:279: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f22' 5 arch/mips/kernel/r4k_switch.S:278: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f20' 5 arch/mips/kernel/r4k_switch.S:277: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f18' 5 arch/mips/kernel/r4k_switch.S:276: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f16' 5 arch/mips/kernel/r4k_switch.S:275: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f14' 5 arch/mips/kernel/r4k_switch.S:274: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f12' 5 arch/mips/kernel/r4k_switch.S:273: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f10' 5 arch/mips/kernel/r4k_switch.S:272: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f8' 5 arch/mips/kernel/r4k_switch.S:271: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f6' 5 arch/mips/kernel/r4k_switch.S:270: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f4' 5 arch/mips/kernel/r4k_switch.S:269: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f2' 5 arch/mips/kernel/r4k_switch.S:268: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f0' 4 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f8,728($4)' 4 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f6,712($4)' 4 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f4,696($4)' 4 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f30,904($4)' 4 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f28,888($4)' 4 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f26,872($4)' 4 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f24,856($4)' 4 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f22,840($4)' 4 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f20,824($4)' 4 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f2,680($4)' 4 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f18,808($4)' 4 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f16,792($4)' 4 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f14,776($4)' 4 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f12,760($4)' 4 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f10,744($4)' 4 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f0,664($4)' 4 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f8,728($4)' 4 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f6,712($4)' 4 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f4,696($4)' 4 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f30,904($4)' 4 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f28,888($4)' 4 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f26,872($4)' 4 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f24,856($4)' 4 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f22,840($4)' 4 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f20,824($4)' 4 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f2,680($4)' 4 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f18,808($4)' 4 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f16,792($4)' 4 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f14,776($4)' 4 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f12,760($4)' 4 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f10,744($4)' 4 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f0,664($4)' 4 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f8,728($4)' 4 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f6,712($4)' 4 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f4,696($4)' 4 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f30,904($4)' 4 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f28,888($4)' 4 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f26,872($4)' 4 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f24,856($4)' 4 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f22,840($4)' 4 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f20,824($4)' 4 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f2,680($4)' 4 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f18,808($4)' 4 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f16,792($4)' 4 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f14,776($4)' 4 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f12,760($4)' 4 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f10,744($4)' 4 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f0,664($4)' 2 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f9,808($4)' 2 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f7,776($4)' 2 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f5,744($4)' 2 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f31,1160($4)' 2 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f3,712($4)' 2 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f29,1128($4)' 2 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f27,1096($4)' 2 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f25,1064($4)' 2 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f23,1032($4)' 2 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f21,1000($4)' 2 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f19,968($4)' 2 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f17,936($4)' 2 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f15,904($4)' 2 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f13,872($4)' 2 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f11,840($4)' 2 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f1,680($4)' 2 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f8,792($4)' 2 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f6,760($4)' 2 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f4,728($4)' 2 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f30,1144($4)' 2 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f28,1112($4)' 2 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f26,1080($4)' 2 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f24,1048($4)' 2 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f22,1016($4)' 2 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f20,984($4)' 2 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f2,696($4)' 2 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f18,952($4)' 2 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f16,920($4)' 2 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f14,888($4)' 2 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f12,856($4)' 2 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f10,824($4)' 2 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f0,664($4)' 2 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f8,728($4)' 2 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f6,712($4)' 2 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f4,696($4)' 2 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f30,904($4)' 2 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f28,888($4)' 2 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f26,872($4)' 2 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f24,856($4)' 2 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f22,840($4)' 2 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f20,824($4)' 2 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f2,680($4)' 2 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f18,808($4)' 2 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f16,792($4)' 2 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f14,776($4)' 2 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f12,760($4)' 2 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f10,744($4)' 2 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f0,664($4)' 2 arch/mips/kernel/r4k_switch.S:263: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f31' 2 arch/mips/kernel/r4k_switch.S:262: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f30' 2 arch/mips/kernel/r4k_switch.S:261: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f29' 2 arch/mips/kernel/r4k_switch.S:260: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f28' 2 arch/mips/kernel/r4k_switch.S:259: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f27' 2 arch/mips/kernel/r4k_switch.S:258: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f26' 2 arch/mips/kernel/r4k_switch.S:257: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f25' 2 arch/mips/kernel/r4k_switch.S:256: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f24' 2 arch/mips/kernel/r4k_switch.S:255: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f23' 2 arch/mips/kernel/r4k_switch.S:254: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f22' 2 arch/mips/kernel/r4k_switch.S:253: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f21' 2 arch/mips/kernel/r4k_switch.S:252: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f20' 2 arch/mips/kernel/r4k_switch.S:251: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f19' 2 arch/mips/kernel/r4k_switch.S:250: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f18' 2 arch/mips/kernel/r4k_switch.S:249: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f17' 2 arch/mips/kernel/r4k_switch.S:248: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f16' 2 arch/mips/kernel/r4k_switch.S:247: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f15' 2 arch/mips/kernel/r4k_switch.S:246: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f14' 2 arch/mips/kernel/r4k_switch.S:245: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f13' 2 arch/mips/kernel/r4k_switch.S:244: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f12' 2 arch/mips/kernel/r4k_switch.S:243: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f11' 2 arch/mips/kernel/r4k_switch.S:242: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f10' 2 arch/mips/kernel/r4k_switch.S:241: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f9' 2 arch/mips/kernel/r4k_switch.S:240: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f8' 2 arch/mips/kernel/r4k_switch.S:239: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f7' 2 arch/mips/kernel/r4k_switch.S:238: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f6' 2 arch/mips/kernel/r4k_switch.S:237: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f5' 2 arch/mips/kernel/r4k_switch.S:236: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f4' 2 arch/mips/kernel/r4k_switch.S:235: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f3' 2 arch/mips/kernel/r4k_switch.S:234: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f2' 2 arch/mips/kernel/r4k_switch.S:233: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f1' 2 arch/mips/kernel/r4k_switch.S:232: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f0' 2 arch/mips/kernel/r4k_switch.S:224: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f31' 2 arch/mips/kernel/r4k_switch.S:224: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f31' 2 arch/mips/kernel/r4k_switch.S:223: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f30' 2 arch/mips/kernel/r4k_switch.S:223: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f30' 2 arch/mips/kernel/r4k_switch.S:222: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f29' 2 arch/mips/kernel/r4k_switch.S:222: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f29' 2 arch/mips/kernel/r4k_switch.S:221: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f28' 2 arch/mips/kernel/r4k_switch.S:221: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f28' 2 arch/mips/kernel/r4k_switch.S:220: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f27' 2 arch/mips/kernel/r4k_switch.S:220: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f27' 2 arch/mips/kernel/r4k_switch.S:219: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f26' 2 arch/mips/kernel/r4k_switch.S:219: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f26' 2 arch/mips/kernel/r4k_switch.S:218: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f25' 2 arch/mips/kernel/r4k_switch.S:218: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f25' 2 arch/mips/kernel/r4k_switch.S:217: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f24' 2 arch/mips/kernel/r4k_switch.S:217: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f24' 2 arch/mips/kernel/r4k_switch.S:216: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f23' 2 arch/mips/kernel/r4k_switch.S:216: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f23' 2 arch/mips/kernel/r4k_switch.S:215: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f22' 2 arch/mips/kernel/r4k_switch.S:215: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f22' 2 arch/mips/kernel/r4k_switch.S:214: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f21' 2 arch/mips/kernel/r4k_switch.S:214: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f21' 2 arch/mips/kernel/r4k_switch.S:213: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f20' 2 arch/mips/kernel/r4k_switch.S:213: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f20' 2 arch/mips/kernel/r4k_switch.S:212: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f19' 2 arch/mips/kernel/r4k_switch.S:212: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f19' 2 arch/mips/kernel/r4k_switch.S:211: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f18' 2 arch/mips/kernel/r4k_switch.S:211: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f18' 2 arch/mips/kernel/r4k_switch.S:210: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f17' 2 arch/mips/kernel/r4k_switch.S:210: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f17' 2 arch/mips/kernel/r4k_switch.S:209: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f16' 2 arch/mips/kernel/r4k_switch.S:209: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f16' 2 arch/mips/kernel/r4k_switch.S:208: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f15' 2 arch/mips/kernel/r4k_switch.S:208: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f15' 2 arch/mips/kernel/r4k_switch.S:207: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f14' 2 arch/mips/kernel/r4k_switch.S:207: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f14' 2 arch/mips/kernel/r4k_switch.S:206: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f13' 2 arch/mips/kernel/r4k_switch.S:206: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f13' 2 arch/mips/kernel/r4k_switch.S:205: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f12' 2 arch/mips/kernel/r4k_switch.S:205: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f12' 2 arch/mips/kernel/r4k_switch.S:204: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f11' 2 arch/mips/kernel/r4k_switch.S:204: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f11' 2 arch/mips/kernel/r4k_switch.S:203: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f10' 2 arch/mips/kernel/r4k_switch.S:203: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f10' 2 arch/mips/kernel/r4k_switch.S:202: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f9' 2 arch/mips/kernel/r4k_switch.S:202: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f9' 2 arch/mips/kernel/r4k_switch.S:201: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f8' 2 arch/mips/kernel/r4k_switch.S:201: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f8' 2 arch/mips/kernel/r4k_switch.S:200: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f7' 2 arch/mips/kernel/r4k_switch.S:200: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f7' 2 arch/mips/kernel/r4k_switch.S:199: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f6' 2 arch/mips/kernel/r4k_switch.S:199: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f6' 2 arch/mips/kernel/r4k_switch.S:198: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f5' 2 arch/mips/kernel/r4k_switch.S:198: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f5' 2 arch/mips/kernel/r4k_switch.S:197: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f4' 2 arch/mips/kernel/r4k_switch.S:197: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f4' 2 arch/mips/kernel/r4k_switch.S:196: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f3' 2 arch/mips/kernel/r4k_switch.S:196: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f3' 2 arch/mips/kernel/r4k_switch.S:195: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f2' 2 arch/mips/kernel/r4k_switch.S:195: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f2' 2 arch/mips/kernel/r4k_switch.S:194: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f1' 2 arch/mips/kernel/r4k_switch.S:194: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f1' 2 arch/mips/kernel/r4k_switch.S:193: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f0' 2 arch/mips/kernel/r4k_switch.S:193: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f0' 2 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f9,808($4)' 2 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f7,776($4)' 2 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f5,744($4)' 2 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f31,1160($4)' 2 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f3,712($4)' 2 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f29,1128($4)' 2 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f27,1096($4)' 2 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f25,1064($4)' 2 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f23,1032($4)' 2 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f21,1000($4)' 2 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f19,968($4)' 2 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f17,936($4)' 2 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f15,904($4)' 2 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f13,872($4)' 2 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f11,840($4)' 2 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f1,680($4)' 2 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ldc1 $f8,792($4)' 2 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ldc1 $f6,760($4)' 2 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ldc1 $f4,728($4)' 2 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ldc1 $f30,1144($4)' 2 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ldc1 $f28,1112($4)' 2 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ldc1 $f26,1080($4)' 2 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ldc1 $f24,1048($4)' 2 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ldc1 $f22,1016($4)' 2 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ldc1 $f20,984($4)' 2 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ldc1 $f2,696($4)' 2 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ldc1 $f18,952($4)' 2 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ldc1 $f16,920($4)' 2 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ldc1 $f14,888($4)' 2 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ldc1 $f12,856($4)' 2 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ldc1 $f10,824($4)' 2 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ldc1 $f0,664($4)' 2 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32 (mips32) `ldc1 $f8,728($4)' 2 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32 (mips32) `ldc1 $f6,712($4)' 2 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32 (mips32) `ldc1 $f4,696($4)' 2 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32 (mips32) `ldc1 $f30,904($4)' 2 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32 (mips32) `ldc1 $f28,888($4)' 2 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32 (mips32) `ldc1 $f26,872($4)' 2 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32 (mips32) `ldc1 $f24,856($4)' 2 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32 (mips32) `ldc1 $f22,840($4)' 2 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32 (mips32) `ldc1 $f20,824($4)' 2 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32 (mips32) `ldc1 $f2,680($4)' 2 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32 (mips32) `ldc1 $f18,808($4)' 2 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32 (mips32) `ldc1 $f16,792($4)' 2 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32 (mips32) `ldc1 $f14,776($4)' 2 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32 (mips32) `ldc1 $f12,760($4)' 2 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32 (mips32) `ldc1 $f10,744($4)' 2 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32 (mips32) `ldc1 $f0,664($4)' 2 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f9,808($4)' 2 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f7,776($4)' 2 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f5,744($4)' 2 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f31,1160($4)' 2 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f3,712($4)' 2 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f29,1128($4)' 2 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f27,1096($4)' 2 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f25,1064($4)' 2 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f23,1032($4)' 2 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f21,1000($4)' 2 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f19,968($4)' 2 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f17,936($4)' 2 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f15,904($4)' 2 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f13,872($4)' 2 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f11,840($4)' 2 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f1,680($4)' 2 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f8,792($4)' 2 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f6,760($4)' 2 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f4,728($4)' 2 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f30,1144($4)' 2 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f28,1112($4)' 2 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f26,1080($4)' 2 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f24,1048($4)' 2 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f22,1016($4)' 2 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f20,984($4)' 2 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f2,696($4)' 2 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f18,952($4)' 2 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f16,920($4)' 2 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f14,888($4)' 2 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f12,856($4)' 2 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f10,824($4)' 2 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f0,664($4)' 2 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f8,728($4)' 2 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f6,712($4)' 2 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f4,696($4)' 2 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f30,904($4)' 2 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f28,888($4)' 2 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f26,872($4)' 2 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f24,856($4)' 2 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f22,840($4)' 2 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f20,824($4)' 2 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f2,680($4)' 2 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f18,808($4)' 2 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f16,792($4)' 2 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f14,776($4)' 2 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f12,760($4)' 2 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f10,744($4)' 2 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f0,664($4)' 2 arch/mips/kernel/r4k_fpu.S:63: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f31,272+248($4)' 2 arch/mips/kernel/r4k_fpu.S:62: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f29,272+232($4)' 2 arch/mips/kernel/r4k_fpu.S:61: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f27,272+216($4)' 2 arch/mips/kernel/r4k_fpu.S:60: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f25,272+200($4)' 2 arch/mips/kernel/r4k_fpu.S:59: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f23,272+184($4)' 2 arch/mips/kernel/r4k_fpu.S:58: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f21,272+168($4)' 2 arch/mips/kernel/r4k_fpu.S:57: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f19,272+152($4)' 2 arch/mips/kernel/r4k_fpu.S:56: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f17,272+136($4)' 2 arch/mips/kernel/r4k_fpu.S:55: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f15,272+120($4)' 2 arch/mips/kernel/r4k_fpu.S:54: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f13,272+104($4)' 2 arch/mips/kernel/r4k_fpu.S:53: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f11,272+88($4)' 2 arch/mips/kernel/r4k_fpu.S:52: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f9,272+72($4)' 2 arch/mips/kernel/r4k_fpu.S:51: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f7,272+56($4)' 2 arch/mips/kernel/r4k_fpu.S:50: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f5,272+40($4)' 2 arch/mips/kernel/r4k_fpu.S:49: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f3,272+24($4)' 2 arch/mips/kernel/r4k_fpu.S:48: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f1,272+8($4)' 2 arch/mips/kernel/r4k_fpu.S:175: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f31,272+248($4)' 2 arch/mips/kernel/r4k_fpu.S:174: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f29,272+232($4)' 2 arch/mips/kernel/r4k_fpu.S:173: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f27,272+216($4)' 2 arch/mips/kernel/r4k_fpu.S:172: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f25,272+200($4)' 2 arch/mips/kernel/r4k_fpu.S:171: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f23,272+184($4)' 2 arch/mips/kernel/r4k_fpu.S:170: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f21,272+168($4)' 2 arch/mips/kernel/r4k_fpu.S:169: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f19,272+152($4)' 2 arch/mips/kernel/r4k_fpu.S:168: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f17,272+136($4)' 2 arch/mips/kernel/r4k_fpu.S:167: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f15,272+120($4)' 2 arch/mips/kernel/r4k_fpu.S:166: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f13,272+104($4)' 2 arch/mips/kernel/r4k_fpu.S:165: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f11,272+88($4)' 2 arch/mips/kernel/r4k_fpu.S:164: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f9,272+72($4)' 2 arch/mips/kernel/r4k_fpu.S:163: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f7,272+56($4)' 2 arch/mips/kernel/r4k_fpu.S:162: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f5,272+40($4)' 2 arch/mips/kernel/r4k_fpu.S:161: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f3,272+24($4)' 2 arch/mips/kernel/r4k_fpu.S:160: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f1,272+8($4)' 1 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f8,1256($4)' 1 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f6,1240($4)' 1 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f4,1224($4)' 1 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f30,1432($4)' 1 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f28,1416($4)' 1 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f26,1400($4)' 1 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f24,1384($4)' 1 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f22,1368($4)' 1 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f20,1352($4)' 1 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f2,1208($4)' 1 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f18,1336($4)' 1 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f16,1320($4)' 1 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f14,1304($4)' 1 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f12,1288($4)' 1 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f10,1272($4)' 1 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f0,1192($4)' 1 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f8,720($4)' 1 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f6,704($4)' 1 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f4,688($4)' 1 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f30,896($4)' 1 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f28,880($4)' 1 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f26,864($4)' 1 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f24,848($4)' 1 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f22,832($4)' 1 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f20,816($4)' 1 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f2,672($4)' 1 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f18,800($4)' 1 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f16,784($4)' 1 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f14,768($4)' 1 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f12,752($4)' 1 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f10,736($4)' 1 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f0,656($4)' 1 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f9,1264($4)' 1 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f7,1248($4)' 1 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f5,1232($4)' 1 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f31,1440($4)' 1 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f3,1216($4)' 1 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f29,1424($4)' 1 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f27,1408($4)' 1 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f25,1392($4)' 1 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f23,1376($4)' 1 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f21,1360($4)' 1 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f19,1344($4)' 1 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f17,1328($4)' 1 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f15,1312($4)' 1 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f13,1296($4)' 1 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f11,1280($4)' 1 arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f1,1200($4)' 1 arch/mips/kernel/r4k_switch.S:283: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $13,$f30' 1 arch/mips/kernel/r4k_switch.S:282: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $13,$f28' 1 arch/mips/kernel/r4k_switch.S:281: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $13,$f26' 1 arch/mips/kernel/r4k_switch.S:280: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $13,$f24' 1 arch/mips/kernel/r4k_switch.S:279: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $13,$f22' 1 arch/mips/kernel/r4k_switch.S:278: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $13,$f20' 1 arch/mips/kernel/r4k_switch.S:277: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $13,$f18' 1 arch/mips/kernel/r4k_switch.S:276: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $13,$f16' 1 arch/mips/kernel/r4k_switch.S:275: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $13,$f14' 1 arch/mips/kernel/r4k_switch.S:274: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $13,$f12' 1 arch/mips/kernel/r4k_switch.S:273: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $13,$f10' 1 arch/mips/kernel/r4k_switch.S:272: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $13,$f8' 1 arch/mips/kernel/r4k_switch.S:271: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $13,$f6' 1 arch/mips/kernel/r4k_switch.S:270: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $13,$f4' 1 arch/mips/kernel/r4k_switch.S:269: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $13,$f2' 1 arch/mips/kernel/r4k_switch.S:268: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $13,$f0' 1 arch/mips/kernel/r4k_switch.S:188: Error: opcode not supported on this processor: sb1 (mips64) `dmtc1 $13,$f31' 1 arch/mips/kernel/r4k_switch.S:187: Error: opcode not supported on this processor: sb1 (mips64) `dmtc1 $13,$f29' 1 arch/mips/kernel/r4k_switch.S:186: Error: opcode not supported on this processor: sb1 (mips64) `dmtc1 $13,$f27' 1 arch/mips/kernel/r4k_switch.S:185: Error: opcode not supported on this processor: sb1 (mips64) `dmtc1 $13,$f25' 1 arch/mips/kernel/r4k_switch.S:184: Error: opcode not supported on this processor: sb1 (mips64) `dmtc1 $13,$f23' 1 arch/mips/kernel/r4k_switch.S:183: Error: opcode not supported on this processor: sb1 (mips64) `dmtc1 $13,$f21' 1 arch/mips/kernel/r4k_switch.S:182: Error: opcode not supported on this processor: sb1 (mips64) `dmtc1 $13,$f19' 1 arch/mips/kernel/r4k_switch.S:181: Error: opcode not supported on this processor: sb1 (mips64) `dmtc1 $13,$f17' 1 arch/mips/kernel/r4k_switch.S:180: Error: opcode not supported on this processor: sb1 (mips64) `dmtc1 $13,$f15' 1 arch/mips/kernel/r4k_switch.S:179: Error: opcode not supported on this processor: sb1 (mips64) `dmtc1 $13,$f13' 1 arch/mips/kernel/r4k_switch.S:178: Error: opcode not supported on this processor: sb1 (mips64) `dmtc1 $13,$f11' 1 arch/mips/kernel/r4k_switch.S:177: Error: opcode not supported on this processor: sb1 (mips64) `dmtc1 $13,$f9' 1 arch/mips/kernel/r4k_switch.S:176: Error: opcode not supported on this processor: sb1 (mips64) `dmtc1 $13,$f7' 1 arch/mips/kernel/r4k_switch.S:175: Error: opcode not supported on this processor: sb1 (mips64) `dmtc1 $13,$f5' 1 arch/mips/kernel/r4k_switch.S:174: Error: opcode not supported on this processor: sb1 (mips64) `dmtc1 $13,$f3' 1 arch/mips/kernel/r4k_switch.S:173: Error: opcode not supported on this processor: sb1 (mips64) `dmtc1 $13,$f1' 1 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: sb1 (mips64) `ldc1 $f8,1256($4)' 1 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: sb1 (mips64) `ldc1 $f6,1240($4)' 1 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: sb1 (mips64) `ldc1 $f4,1224($4)' 1 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: sb1 (mips64) `ldc1 $f30,1432($4)' 1 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: sb1 (mips64) `ldc1 $f28,1416($4)' 1 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: sb1 (mips64) `ldc1 $f26,1400($4)' 1 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: sb1 (mips64) `ldc1 $f24,1384($4)' 1 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: sb1 (mips64) `ldc1 $f22,1368($4)' 1 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: sb1 (mips64) `ldc1 $f20,1352($4)' 1 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: sb1 (mips64) `ldc1 $f2,1208($4)' 1 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: sb1 (mips64) `ldc1 $f18,1336($4)' 1 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: sb1 (mips64) `ldc1 $f16,1320($4)' 1 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: sb1 (mips64) `ldc1 $f14,1304($4)' 1 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: sb1 (mips64) `ldc1 $f12,1288($4)' 1 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: sb1 (mips64) `ldc1 $f10,1272($4)' 1 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: sb1 (mips64) `ldc1 $f0,1192($4)' 1 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: r4600 (mips3) `ldc1 $f8,720($4)' 1 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: r4600 (mips3) `ldc1 $f6,704($4)' 1 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: r4600 (mips3) `ldc1 $f4,688($4)' 1 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: r4600 (mips3) `ldc1 $f30,896($4)' 1 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: r4600 (mips3) `ldc1 $f28,880($4)' 1 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: r4600 (mips3) `ldc1 $f26,864($4)' 1 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: r4600 (mips3) `ldc1 $f24,848($4)' 1 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: r4600 (mips3) `ldc1 $f22,832($4)' 1 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: r4600 (mips3) `ldc1 $f20,816($4)' 1 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: r4600 (mips3) `ldc1 $f2,672($4)' 1 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: r4600 (mips3) `ldc1 $f18,800($4)' 1 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: r4600 (mips3) `ldc1 $f16,784($4)' 1 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: r4600 (mips3) `ldc1 $f14,768($4)' 1 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: r4600 (mips3) `ldc1 $f12,752($4)' 1 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: r4600 (mips3) `ldc1 $f10,736($4)' 1 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: r4600 (mips3) `ldc1 $f0,656($4)' 1 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f9,1264($4)' 1 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f7,1248($4)' 1 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f5,1232($4)' 1 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f31,1440($4)' 1 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f3,1216($4)' 1 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f29,1424($4)' 1 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f27,1408($4)' 1 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f25,1392($4)' 1 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f23,1376($4)' 1 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f21,1360($4)' 1 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f19,1344($4)' 1 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f17,1328($4)' 1 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f15,1312($4)' 1 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f13,1296($4)' 1 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f11,1280($4)' 1 arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f1,1200($4)' 1 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f8,1256($4)' 1 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f6,1240($4)' 1 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f4,1224($4)' 1 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f30,1432($4)' 1 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f28,1416($4)' 1 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f26,1400($4)' 1 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f24,1384($4)' 1 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f22,1368($4)' 1 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f20,1352($4)' 1 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f2,1208($4)' 1 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f18,1336($4)' 1 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f16,1320($4)' 1 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f14,1304($4)' 1 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f12,1288($4)' 1 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f10,1272($4)' 1 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f0,1192($4)' 1 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f8,720($4)' 1 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f6,704($4)' 1 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f4,688($4)' 1 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f30,896($4)' 1 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f28,880($4)' 1 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f26,864($4)' 1 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f24,848($4)' 1 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f22,832($4)' 1 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f20,816($4)' 1 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f2,672($4)' 1 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f18,800($4)' 1 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f16,784($4)' 1 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f14,768($4)' 1 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f12,752($4)' 1 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f10,736($4)' 1 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f0,656($4)' 1 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f9,1264($4)' 1 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f7,1248($4)' 1 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f5,1232($4)' 1 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f31,1440($4)' 1 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f3,1216($4)' 1 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f29,1424($4)' 1 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f27,1408($4)' 1 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f25,1392($4)' 1 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f23,1376($4)' 1 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f21,1360($4)' 1 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f19,1344($4)' 1 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f17,1328($4)' 1 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f15,1312($4)' 1 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f13,1296($4)' 1 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f11,1280($4)' 1 arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f1,1200($4)' 1 arch/mips/kernel/r4k_fpu.S:83: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f30,256+240($4)' 1 arch/mips/kernel/r4k_fpu.S:82: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f28,256+224($4)' 1 arch/mips/kernel/r4k_fpu.S:81: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f26,256+208($4)' 1 arch/mips/kernel/r4k_fpu.S:80: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f24,256+192($4)' 1 arch/mips/kernel/r4k_fpu.S:79: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f22,256+176($4)' 1 arch/mips/kernel/r4k_fpu.S:78: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f20,256+160($4)' 1 arch/mips/kernel/r4k_fpu.S:77: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f18,256+144($4)' 1 arch/mips/kernel/r4k_fpu.S:76: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f16,256+128($4)' 1 arch/mips/kernel/r4k_fpu.S:75: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f14,256+112($4)' 1 arch/mips/kernel/r4k_fpu.S:74: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f12,256+96($4)' 1 arch/mips/kernel/r4k_fpu.S:73: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f10,256+80($4)' 1 arch/mips/kernel/r4k_fpu.S:72: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f8,256+64($4)' 1 arch/mips/kernel/r4k_fpu.S:71: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f6,256+48($4)' 1 arch/mips/kernel/r4k_fpu.S:70: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f4,256+32($4)' 1 arch/mips/kernel/r4k_fpu.S:69: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f2,256+16($4)' 1 arch/mips/kernel/r4k_fpu.S:68: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f0,256+0($4)' 1 arch/mips/kernel/r4k_fpu.S:63: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f31,256+248($4)' 1 arch/mips/kernel/r4k_fpu.S:62: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f29,256+232($4)' 1 arch/mips/kernel/r4k_fpu.S:61: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f27,256+216($4)' 1 arch/mips/kernel/r4k_fpu.S:60: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f25,256+200($4)' 1 arch/mips/kernel/r4k_fpu.S:59: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f23,256+184($4)' 1 arch/mips/kernel/r4k_fpu.S:58: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f21,256+168($4)' 1 arch/mips/kernel/r4k_fpu.S:57: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f19,256+152($4)' 1 arch/mips/kernel/r4k_fpu.S:56: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f17,256+136($4)' 1 arch/mips/kernel/r4k_fpu.S:55: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f15,256+120($4)' 1 arch/mips/kernel/r4k_fpu.S:54: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f13,256+104($4)' 1 arch/mips/kernel/r4k_fpu.S:53: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f11,256+88($4)' 1 arch/mips/kernel/r4k_fpu.S:52: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f9,256+72($4)' 1 arch/mips/kernel/r4k_fpu.S:51: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f7,256+56($4)' 1 arch/mips/kernel/r4k_fpu.S:50: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f5,256+40($4)' 1 arch/mips/kernel/r4k_fpu.S:49: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f3,256+24($4)' 1 arch/mips/kernel/r4k_fpu.S:48: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f1,256+8($4)' 1 arch/mips/kernel/r4k_fpu.S:241: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f30,272+240($4)' 1 arch/mips/kernel/r4k_fpu.S:240: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f28,272+224($4)' 1 arch/mips/kernel/r4k_fpu.S:239: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f26,272+208($4)' 1 arch/mips/kernel/r4k_fpu.S:238: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f24,272+192($4)' 1 arch/mips/kernel/r4k_fpu.S:237: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f22,272+176($4)' 1 arch/mips/kernel/r4k_fpu.S:236: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f20,272+160($4)' 1 arch/mips/kernel/r4k_fpu.S:235: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f18,272+144($4)' 1 arch/mips/kernel/r4k_fpu.S:234: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f16,272+128($4)' 1 arch/mips/kernel/r4k_fpu.S:233: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f14,272+112($4)' 1 arch/mips/kernel/r4k_fpu.S:232: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f12,272+96($4)' 1 arch/mips/kernel/r4k_fpu.S:231: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f10,272+80($4)' 1 arch/mips/kernel/r4k_fpu.S:230: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f8,272+64($4)' 1 arch/mips/kernel/r4k_fpu.S:229: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f6,272+48($4)' 1 arch/mips/kernel/r4k_fpu.S:228: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f4,272+32($4)' 1 arch/mips/kernel/r4k_fpu.S:227: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f2,272+16($4)' 1 arch/mips/kernel/r4k_fpu.S:226: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f0,272+0($4)' 1 arch/mips/kernel/r4k_fpu.S:224: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f31,272+248($4)' 1 arch/mips/kernel/r4k_fpu.S:223: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f29,272+232($4)' 1 arch/mips/kernel/r4k_fpu.S:222: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f27,272+216($4)' 1 arch/mips/kernel/r4k_fpu.S:221: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f25,272+200($4)' 1 arch/mips/kernel/r4k_fpu.S:220: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f23,272+184($4)' 1 arch/mips/kernel/r4k_fpu.S:219: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f21,272+168($4)' 1 arch/mips/kernel/r4k_fpu.S:218: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f19,272+152($4)' 1 arch/mips/kernel/r4k_fpu.S:217: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f17,272+136($4)' 1 arch/mips/kernel/r4k_fpu.S:216: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f15,272+120($4)' 1 arch/mips/kernel/r4k_fpu.S:215: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f13,272+104($4)' 1 arch/mips/kernel/r4k_fpu.S:214: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f11,272+88($4)' 1 arch/mips/kernel/r4k_fpu.S:213: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f9,272+72($4)' 1 arch/mips/kernel/r4k_fpu.S:212: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f7,272+56($4)' 1 arch/mips/kernel/r4k_fpu.S:211: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f5,272+40($4)' 1 arch/mips/kernel/r4k_fpu.S:210: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f3,272+24($4)' 1 arch/mips/kernel/r4k_fpu.S:209: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f1,272+8($4)' 1 arch/mips/kernel/r4k_fpu.S:193: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f30,256+240($4)' 1 arch/mips/kernel/r4k_fpu.S:192: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f28,256+224($4)' 1 arch/mips/kernel/r4k_fpu.S:191: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f26,256+208($4)' 1 arch/mips/kernel/r4k_fpu.S:190: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f24,256+192($4)' 1 arch/mips/kernel/r4k_fpu.S:189: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f22,256+176($4)' 1 arch/mips/kernel/r4k_fpu.S:188: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f20,256+160($4)' 1 arch/mips/kernel/r4k_fpu.S:187: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f18,256+144($4)' 1 arch/mips/kernel/r4k_fpu.S:186: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f16,256+128($4)' 1 arch/mips/kernel/r4k_fpu.S:185: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f14,256+112($4)' 1 arch/mips/kernel/r4k_fpu.S:184: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f12,256+96($4)' 1 arch/mips/kernel/r4k_fpu.S:183: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f10,256+80($4)' 1 arch/mips/kernel/r4k_fpu.S:182: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f8,256+64($4)' 1 arch/mips/kernel/r4k_fpu.S:181: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f6,256+48($4)' 1 arch/mips/kernel/r4k_fpu.S:180: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f4,256+32($4)' 1 arch/mips/kernel/r4k_fpu.S:179: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f2,256+16($4)' 1 arch/mips/kernel/r4k_fpu.S:178: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f0,256+0($4)' 1 arch/mips/kernel/r4k_fpu.S:175: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f31,256+248($4)' 1 arch/mips/kernel/r4k_fpu.S:174: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f29,256+232($4)' 1 arch/mips/kernel/r4k_fpu.S:173: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f27,256+216($4)' 1 arch/mips/kernel/r4k_fpu.S:172: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f25,256+200($4)' 1 arch/mips/kernel/r4k_fpu.S:171: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f23,256+184($4)' 1 arch/mips/kernel/r4k_fpu.S:170: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f21,256+168($4)' 1 arch/mips/kernel/r4k_fpu.S:169: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f19,256+152($4)' 1 arch/mips/kernel/r4k_fpu.S:168: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f17,256+136($4)' 1 arch/mips/kernel/r4k_fpu.S:167: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f15,256+120($4)' 1 arch/mips/kernel/r4k_fpu.S:166: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f13,256+104($4)' 1 arch/mips/kernel/r4k_fpu.S:165: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f11,256+88($4)' 1 arch/mips/kernel/r4k_fpu.S:164: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f9,256+72($4)' 1 arch/mips/kernel/r4k_fpu.S:163: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f7,256+56($4)' 1 arch/mips/kernel/r4k_fpu.S:162: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f5,256+40($4)' 1 arch/mips/kernel/r4k_fpu.S:161: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f3,256+24($4)' 1 arch/mips/kernel/r4k_fpu.S:160: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f1,256+8($4)' 1 arch/mips/kernel/r4k_fpu.S:133: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f30,272+240($4)' 1 arch/mips/kernel/r4k_fpu.S:132: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f28,272+224($4)' 1 arch/mips/kernel/r4k_fpu.S:131: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f26,272+208($4)' 1 arch/mips/kernel/r4k_fpu.S:130: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f24,272+192($4)' 1 arch/mips/kernel/r4k_fpu.S:129: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f22,272+176($4)' 1 arch/mips/kernel/r4k_fpu.S:128: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f20,272+160($4)' 1 arch/mips/kernel/r4k_fpu.S:127: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f18,272+144($4)' 1 arch/mips/kernel/r4k_fpu.S:126: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f16,272+128($4)' 1 arch/mips/kernel/r4k_fpu.S:125: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f14,272+112($4)' 1 arch/mips/kernel/r4k_fpu.S:124: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f12,272+96($4)' 1 arch/mips/kernel/r4k_fpu.S:123: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f10,272+80($4)' 1 arch/mips/kernel/r4k_fpu.S:122: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f8,272+64($4)' 1 arch/mips/kernel/r4k_fpu.S:121: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f6,272+48($4)' 1 arch/mips/kernel/r4k_fpu.S:120: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f4,272+32($4)' 1 arch/mips/kernel/r4k_fpu.S:119: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f2,272+16($4)' 1 arch/mips/kernel/r4k_fpu.S:118: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f0,272+0($4)' 1 arch/mips/kernel/r4k_fpu.S:115: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f31,272+248($4)' 1 arch/mips/kernel/r4k_fpu.S:114: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f29,272+232($4)' 1 arch/mips/kernel/r4k_fpu.S:113: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f27,272+216($4)' 1 arch/mips/kernel/r4k_fpu.S:112: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f25,272+200($4)' 1 arch/mips/kernel/r4k_fpu.S:111: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f23,272+184($4)' 1 arch/mips/kernel/r4k_fpu.S:110: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f21,272+168($4)' 1 arch/mips/kernel/r4k_fpu.S:109: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f19,272+152($4)' 1 arch/mips/kernel/r4k_fpu.S:108: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f17,272+136($4)' 1 arch/mips/kernel/r4k_fpu.S:107: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f15,272+120($4)' 1 arch/mips/kernel/r4k_fpu.S:106: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f13,272+104($4)' 1 arch/mips/kernel/r4k_fpu.S:105: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f11,272+88($4)' 1 arch/mips/kernel/r4k_fpu.S:104: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f9,272+72($4)' 1 arch/mips/kernel/r4k_fpu.S:103: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f7,272+56($4)' 1 arch/mips/kernel/r4k_fpu.S:102: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f5,272+40($4)' 1 arch/mips/kernel/r4k_fpu.S:101: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f3,272+24($4)' 1 arch/mips/kernel/r4k_fpu.S:100: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f1,272+8($4)' Warnings summary: 30 fs/namespace.c:2787:6: warning: 'kernel_type' may be used uninitialized in this function [-Wmaybe-uninitialized] 30 fs/namespace.c:2787:6: warning: 'kernel_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] 20 include/linux/blkdev.h:623:26: warning: switch condition has boolean value [-Wswitch-bool] 9 mm/page_alloc.c:5328:34: warning: array subscript is below array bounds [-Warray-bounds] 7 fs/nfs/nfs4proc.c:3005:10: warning: switch condition has boolean value [-Wswitch-bool] 4 ipc/sem.c:377:6: warning: '___p1' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 fs/namespace.c:2787:8: warning: 'kernel_type' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 fs/namespace.c:2787:8: warning: 'kernel_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/mtd/mtd_blkdevs.c:100:2: warning: switch condition has boolean value [-Wswitch-bool] 4 arch/x86/include/asm/spinlock.h:99:3: warning: implicit declaration of function '__ticket_lock_spinning' [-Wimplicit-function-declaration] 4 arch/x86/include/asm/spinlock.h:142:3: warning: implicit declaration of function '__ticket_unlock_kick' [-Wimplicit-function-declaration] 3 drivers/iio/industrialio-core.c:408:23: warning: format '%u' expects argument of type 'unsigned int', but argument 4 has type 'long int' [-Wformat=] 2 drivers/scsi/scsi_tgt_if.c:289:36: warning: passing argument 1 of 'virt_to_phys' makes pointer from integer without a cast [-Wint-conversion] 2 drivers/net/ethernet/amd/nmclan_cs.c:624:3: warning: 'pcmcia_request_exclusive_irq' is deprecated [-Wdeprecated-declarations] 2 drivers/hid/hid-input.c:1122:67: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] 2 arch/x86/include/asm/pgtable_64.h:184:26: warning: suggest parentheses around assignment used as truth value [-Wparentheses] 2 arch/arm64/include/asm/pgtable.h:40:28: warning: suggest parentheses around assignment used as truth value [-Wparentheses] 1 sound/soc/fsl/imx-audmux.c:70:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 sound/soc/fsl/imx-audmux.c:162:7: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 sound/soc/fsl/fsl_sai.c:337:7: warning: large integer implicitly truncated to unsigned type [-Woverflow] 1 sound/soc/codecs/adau1977.c:971:20: warning: large integer implicitly truncated to unsigned type [-Woverflow] 1 sound/pci/oxygen/oxygen_mixer.c:91:43: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] 1 net/netfilter/nft_reject.c:59:2: warning: enumeration value 'NFT_REJECT_TCP_RST' not handled in switch [-Wswitch] 1 net/netfilter/nft_ct.c:64:2: warning: enumeration value 'NFT_CT_STATE' not handled in switch [-Wswitch] 1 net/netfilter/nft_ct.c:64:2: warning: enumeration value 'NFT_CT_SRC' not handled in switch [-Wswitch] 1 net/netfilter/nft_ct.c:64:2: warning: enumeration value 'NFT_CT_PROTO_SRC' not handled in switch [-Wswitch] 1 net/netfilter/nft_ct.c:64:2: warning: enumeration value 'NFT_CT_PROTO_DST' not handled in switch [-Wswitch] 1 net/netfilter/nft_ct.c:64:2: warning: enumeration value 'NFT_CT_PROTOCOL' not handled in switch [-Wswitch] 1 net/netfilter/nft_ct.c:64:2: warning: enumeration value 'NFT_CT_L3PROTOCOL' not handled in switch [-Wswitch] 1 net/netfilter/nft_ct.c:64:2: warning: enumeration value 'NFT_CT_DST' not handled in switch [-Wswitch] 1 net/netfilter/nft_ct.c:49:2: warning: enumeration value 'NFT_CT_STATUS' not handled in switch [-Wswitch] 1 net/netfilter/nft_ct.c:49:2: warning: enumeration value 'NFT_CT_SRC' not handled in switch [-Wswitch] 1 net/netfilter/nft_ct.c:49:2: warning: enumeration value 'NFT_CT_SECMARK' not handled in switch [-Wswitch] 1 net/netfilter/nft_ct.c:49:2: warning: enumeration value 'NFT_CT_PROTO_SRC' not handled in switch [-Wswitch] 1 net/netfilter/nft_ct.c:49:2: warning: enumeration value 'NFT_CT_PROTO_DST' not handled in switch [-Wswitch] 1 net/netfilter/nft_ct.c:49:2: warning: enumeration value 'NFT_CT_PROTOCOL' not handled in switch [-Wswitch] 1 net/netfilter/nft_ct.c:49:2: warning: enumeration value 'NFT_CT_MARK' not handled in switch [-Wswitch] 1 net/netfilter/nft_ct.c:49:2: warning: enumeration value 'NFT_CT_LABELS' not handled in switch [-Wswitch] 1 net/netfilter/nft_ct.c:49:2: warning: enumeration value 'NFT_CT_L3PROTOCOL' not handled in switch [-Wswitch] 1 net/netfilter/nft_ct.c:49:2: warning: enumeration value 'NFT_CT_HELPER' not handled in switch [-Wswitch] 1 net/netfilter/nft_ct.c:49:2: warning: enumeration value 'NFT_CT_EXPIRATION' not handled in switch [-Wswitch] 1 net/netfilter/nft_ct.c:49:2: warning: enumeration value 'NFT_CT_DST' not handled in switch [-Wswitch] 1 net/netfilter/nft_ct.c:49:2: warning: enumeration value 'NFT_CT_DIRECTION' not handled in switch [-Wswitch] 1 net/netfilter/nft_ct.c:166:2: warning: enumeration value 'NFT_CT_STATUS' not handled in switch [-Wswitch] 1 net/netfilter/nft_ct.c:166:2: warning: enumeration value 'NFT_CT_STATE' not handled in switch [-Wswitch] 1 net/netfilter/nft_ct.c:166:2: warning: enumeration value 'NFT_CT_SRC' not handled in switch [-Wswitch] 1 net/netfilter/nft_ct.c:166:2: warning: enumeration value 'NFT_CT_SECMARK' not handled in switch [-Wswitch] 1 net/netfilter/nft_ct.c:166:2: warning: enumeration value 'NFT_CT_PROTO_SRC' not handled in switch [-Wswitch] 1 net/netfilter/nft_ct.c:166:2: warning: enumeration value 'NFT_CT_PROTO_DST' not handled in switch [-Wswitch] 1 net/netfilter/nft_ct.c:166:2: warning: enumeration value 'NFT_CT_PROTOCOL' not handled in switch [-Wswitch] 1 net/netfilter/nft_ct.c:166:2: warning: enumeration value 'NFT_CT_LABELS' not handled in switch [-Wswitch] 1 net/netfilter/nft_ct.c:166:2: warning: enumeration value 'NFT_CT_L3PROTOCOL' not handled in switch [-Wswitch] 1 net/netfilter/nft_ct.c:166:2: warning: enumeration value 'NFT_CT_HELPER' not handled in switch [-Wswitch] 1 net/netfilter/nft_ct.c:166:2: warning: enumeration value 'NFT_CT_EXPIRATION' not handled in switch [-Wswitch] 1 net/netfilter/nft_ct.c:166:2: warning: enumeration value 'NFT_CT_DST' not handled in switch [-Wswitch] 1 net/netfilter/nft_ct.c:166:2: warning: enumeration value 'NFT_CT_DIRECTION' not handled in switch [-Wswitch] 1 net/netfilter/nft_ct.c:123:2: warning: enumeration value 'NFT_CT_STATUS' not handled in switch [-Wswitch] 1 net/netfilter/nft_ct.c:123:2: warning: enumeration value 'NFT_CT_STATE' not handled in switch [-Wswitch] 1 net/netfilter/nft_ct.c:123:2: warning: enumeration value 'NFT_CT_SECMARK' not handled in switch [-Wswitch] 1 net/netfilter/nft_ct.c:123:2: warning: enumeration value 'NFT_CT_MARK' not handled in switch [-Wswitch] 1 net/netfilter/nft_ct.c:123:2: warning: enumeration value 'NFT_CT_LABELS' not handled in switch [-Wswitch] 1 net/netfilter/nft_ct.c:123:2: warning: enumeration value 'NFT_CT_HELPER' not handled in switch [-Wswitch] 1 net/netfilter/nft_ct.c:123:2: warning: enumeration value 'NFT_CT_EXPIRATION' not handled in switch [-Wswitch] 1 net/netfilter/nft_ct.c:123:2: warning: enumeration value 'NFT_CT_DIRECTION' not handled in switch [-Wswitch] 1 net/netfilter/nft_compat.c:298:9: warning: switch condition has boolean value [-Wswitch-bool] 1 drivers/tty/serial/samsung.c:1234:6: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t {aka long long unsigned int}' [-Wformat=] 1 drivers/staging/bcm/CmHost.c:1563:3: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/staging/bcm/CmHost.c:1545:3: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/staging/bcm/CmHost.c:1502:3: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/spi/spi-atmel.c:1257:19: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/spi/spi-atmel.c:1022:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/scsi/be2iscsi/be_main.c:3156:18: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] 1 drivers/scsi/advansys.c:71:2: warning: #warning this driver is still not properly converted to the DMA API [-Wcpp] 1 drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c:1450:8: warning: 'skb' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 drivers/net/ethernet/intel/i40e/i40e_debugfs.c:836:1: warning: the frame size of 8192 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 drivers/mmc/host/sunxi-mmc.c:297:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/message/i2o/i2o_config.c:893:19: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/gpio/gpio-sch311x.c:286:3: warning: ignoring return value of 'gpiochip_remove', declared with attribute warn_unused_result [-Wunused-result] 1 drivers/atm/iphase.c:1176:12: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 1 drivers/ata/pata_hpt366.c:382:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers] 1 drivers/ata/pata_hpt366.c:379:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers] 1 drivers/ata/pata_hpt366.c:376:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers] 1 crypto/wp512.c:987:1: warning: the frame size of 1112 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 block/compat_ioctl.c:201:18: warning: 'udata' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 arch/mips/ralink/prom.c:64:2: warning: 'argv' is used uninitialized in this function [-Wuninitialized] 1 arch/mips/ralink/prom.c:64:2: warning: 'argc' is used uninitialized in this function [-Wuninitialized] 1 arch/mips/include/asm/uaccess.h:452:2: warning: 'size' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 arch/mips/include/asm/uaccess.h:452:2: warning: 'n' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 arch/mips/include/asm/uaccess.h:452:2: warning: 'length' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 arch/mips/include/asm/compat.h:208:24: warning: 'rtdev' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 arch/mips/include/asm/compat.h:208:24: warning: 'palp' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 arch/mips/include/asm/compat.h:208:24: warning: 'handler' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 arch/mips/include/asm/compat.h:208:24: warning: 'fp' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 .../drivers/message/i2o/i2o_config.c:953:10: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] Section mismatches summary: 1 WARNING: vmlinux.o(.text.unlikely+0x1b31): Section mismatch in reference from the function cpumask_empty.constprop.3() to the variable .init.data:nmi_ipi_mask 1 WARNING: arch/x86/kernel/built-in.o(.text.unlikely+0x1752): Section mismatch in reference from the function cpumask_empty.constprop.3() to the variable .init.data:nmi_ipi_mask 1 WARNING: arch/x86/built-in.o(.text.unlikely+0x1a6a): Section mismatch in reference from the function cpumask_empty.constprop.3() to the variable .init.data:nmi_ipi_mask ================================================================================ Detailed per-defconfig build reports: -------------------------------------------------------------------------------- allmodconfig+CONFIG_OF=n (x86) — PASS, 0 errors, 77 warnings, 0 section mismatches Warnings: include/linux/blkdev.h:623:26: warning: switch condition has boolean value [-Wswitch-bool] drivers/ata/pata_hpt366.c:376:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers] drivers/ata/pata_hpt366.c:379:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers] drivers/ata/pata_hpt366.c:382:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers] arch/x86/include/asm/pgtable_64.h:184:26: warning: suggest parentheses around assignment used as truth value [-Wparentheses] sound/soc/fsl/fsl_sai.c:337:7: warning: large integer implicitly truncated to unsigned type [-Woverflow] sound/soc/codecs/adau1977.c:971:20: warning: large integer implicitly truncated to unsigned type [-Woverflow] drivers/hid/hid-input.c:1122:67: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] sound/soc/fsl/imx-audmux.c:70:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] sound/soc/fsl/imx-audmux.c:162:7: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] drivers/gpio/gpio-sch311x.c:286:3: warning: ignoring return value of 'gpiochip_remove', declared with attribute warn_unused_result [-Wunused-result] sound/pci/oxygen/oxygen_mixer.c:91:43: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] drivers/iio/industrialio-core.c:408:23: warning: format '%u' expects argument of type 'unsigned int', but argument 4 has type 'long int' [-Wformat=] drivers/message/i2o/i2o_config.c:893:19: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] .../drivers/message/i2o/i2o_config.c:953:10: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] net/netfilter/nft_compat.c:298:9: warning: switch condition has boolean value [-Wswitch-bool] net/netfilter/nft_ct.c:49:2: warning: enumeration value 'NFT_CT_DIRECTION' not handled in switch [-Wswitch] net/netfilter/nft_ct.c:49:2: warning: enumeration value 'NFT_CT_STATUS' not handled in switch [-Wswitch] net/netfilter/nft_ct.c:49:2: warning: enumeration value 'NFT_CT_MARK' not handled in switch [-Wswitch] net/netfilter/nft_ct.c:49:2: warning: enumeration value 'NFT_CT_SECMARK' not handled in switch [-Wswitch] net/netfilter/nft_ct.c:49:2: warning: enumeration value 'NFT_CT_EXPIRATION' not handled in switch [-Wswitch] net/netfilter/nft_ct.c:49:2: warning: enumeration value 'NFT_CT_HELPER' not handled in switch [-Wswitch] net/netfilter/nft_ct.c:49:2: warning: enumeration value 'NFT_CT_L3PROTOCOL' not handled in switch [-Wswitch] net/netfilter/nft_ct.c:49:2: warning: enumeration value 'NFT_CT_SRC' not handled in switch [-Wswitch] net/netfilter/nft_ct.c:49:2: warning: enumeration value 'NFT_CT_DST' not handled in switch [-Wswitch] net/netfilter/nft_ct.c:49:2: warning: enumeration value 'NFT_CT_PROTOCOL' not handled in switch [-Wswitch] net/netfilter/nft_ct.c:49:2: warning: enumeration value 'NFT_CT_PROTO_SRC' not handled in switch [-Wswitch] net/netfilter/nft_ct.c:49:2: warning: enumeration value 'NFT_CT_PROTO_DST' not handled in switch [-Wswitch] net/netfilter/nft_ct.c:49:2: warning: enumeration value 'NFT_CT_LABELS' not handled in switch [-Wswitch] net/netfilter/nft_ct.c:64:2: warning: enumeration value 'NFT_CT_STATE' not handled in switch [-Wswitch] net/netfilter/nft_ct.c:64:2: warning: enumeration value 'NFT_CT_L3PROTOCOL' not handled in switch [-Wswitch] net/netfilter/nft_ct.c:64:2: warning: enumeration value 'NFT_CT_SRC' not handled in switch [-Wswitch] net/netfilter/nft_ct.c:64:2: warning: enumeration value 'NFT_CT_DST' not handled in switch [-Wswitch] net/netfilter/nft_ct.c:64:2: warning: enumeration value 'NFT_CT_PROTOCOL' not handled in switch [-Wswitch] net/netfilter/nft_ct.c:64:2: warning: enumeration value 'NFT_CT_PROTO_SRC' not handled in switch [-Wswitch] net/netfilter/nft_ct.c:64:2: warning: enumeration value 'NFT_CT_PROTO_DST' not handled in switch [-Wswitch] net/netfilter/nft_ct.c:123:2: warning: enumeration value 'NFT_CT_STATE' not handled in switch [-Wswitch] net/netfilter/nft_ct.c:123:2: warning: enumeration value 'NFT_CT_DIRECTION' not handled in switch [-Wswitch] net/netfilter/nft_ct.c:123:2: warning: enumeration value 'NFT_CT_STATUS' not handled in switch [-Wswitch] net/netfilter/nft_ct.c:123:2: warning: enumeration value 'NFT_CT_MARK' not handled in switch [-Wswitch] net/netfilter/nft_ct.c:123:2: warning: enumeration value 'NFT_CT_SECMARK' not handled in switch [-Wswitch] net/netfilter/nft_ct.c:123:2: warning: enumeration value 'NFT_CT_EXPIRATION' not handled in switch [-Wswitch] net/netfilter/nft_ct.c:123:2: warning: enumeration value 'NFT_CT_HELPER' not handled in switch [-Wswitch] net/netfilter/nft_ct.c:123:2: warning: enumeration value 'NFT_CT_LABELS' not handled in switch [-Wswitch] net/netfilter/nft_ct.c:166:2: warning: enumeration value 'NFT_CT_STATE' not handled in switch [-Wswitch] net/netfilter/nft_ct.c:166:2: warning: enumeration value 'NFT_CT_DIRECTION' not handled in switch [-Wswitch] net/netfilter/nft_ct.c:166:2: warning: enumeration value 'NFT_CT_STATUS' not handled in switch [-Wswitch] net/netfilter/nft_ct.c:166:2: warning: enumeration value 'NFT_CT_SECMARK' not handled in switch [-Wswitch] net/netfilter/nft_ct.c:166:2: warning: enumeration value 'NFT_CT_EXPIRATION' not handled in switch [-Wswitch] net/netfilter/nft_ct.c:166:2: warning: enumeration value 'NFT_CT_HELPER' not handled in switch [-Wswitch] net/netfilter/nft_ct.c:166:2: warning: enumeration value 'NFT_CT_L3PROTOCOL' not handled in switch [-Wswitch] net/netfilter/nft_ct.c:166:2: warning: enumeration value 'NFT_CT_SRC' not handled in switch [-Wswitch] net/netfilter/nft_ct.c:166:2: warning: enumeration value 'NFT_CT_DST' not handled in switch [-Wswitch] net/netfilter/nft_ct.c:166:2: warning: enumeration value 'NFT_CT_PROTOCOL' not handled in switch [-Wswitch] net/netfilter/nft_ct.c:166:2: warning: enumeration value 'NFT_CT_PROTO_SRC' not handled in switch [-Wswitch] net/netfilter/nft_ct.c:166:2: warning: enumeration value 'NFT_CT_PROTO_DST' not handled in switch [-Wswitch] net/netfilter/nft_ct.c:166:2: warning: enumeration value 'NFT_CT_LABELS' not handled in switch [-Wswitch] net/netfilter/nft_reject.c:59:2: warning: enumeration value 'NFT_REJECT_TCP_RST' not handled in switch [-Wswitch] drivers/net/ethernet/amd/nmclan_cs.c:624:3: warning: 'pcmcia_request_exclusive_irq' is deprecated [-Wdeprecated-declarations] fs/nfs/nfs4proc.c:3005:10: warning: switch condition has boolean value [-Wswitch-bool] include/linux/blkdev.h:623:26: warning: switch condition has boolean value [-Wswitch-bool] drivers/spi/spi-atmel.c:1022:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] drivers/spi/spi-atmel.c:1257:19: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] drivers/staging/bcm/CmHost.c:1502:3: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] drivers/staging/bcm/CmHost.c:1545:3: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] drivers/staging/bcm/CmHost.c:1563:3: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] drivers/net/ethernet/intel/i40e/i40e_debugfs.c:836:1: warning: the frame size of 8192 bytes is larger than 2048 bytes [-Wframe-larger-than=] drivers/scsi/be2iscsi/be_main.c:3156:18: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] drivers/scsi/advansys.c:71:2: warning: #warning this driver is still not properly converted to the DMA API [-Wcpp] arch/x86/include/asm/spinlock.h:99:3: warning: implicit declaration of function '__ticket_lock_spinning' [-Wimplicit-function-declaration] arch/x86/include/asm/spinlock.h:142:3: warning: implicit declaration of function '__ticket_unlock_kick' [-Wimplicit-function-declaration] arch/x86/include/asm/spinlock.h:99:3: warning: implicit declaration of function '__ticket_lock_spinning' [-Wimplicit-function-declaration] arch/x86/include/asm/spinlock.h:142:3: warning: implicit declaration of function '__ticket_unlock_kick' [-Wimplicit-function-declaration] arch/x86/include/asm/spinlock.h:99:3: warning: implicit declaration of function '__ticket_lock_spinning' [-Wimplicit-function-declaration] arch/x86/include/asm/spinlock.h:99:3: warning: implicit declaration of function '__ticket_lock_spinning' [-Wimplicit-function-declaration] arch/x86/include/asm/spinlock.h:142:3: warning: implicit declaration of function '__ticket_unlock_kick' [-Wimplicit-function-declaration] arch/x86/include/asm/spinlock.h:142:3: warning: implicit declaration of function '__ticket_unlock_kick' [-Wimplicit-function-declaration] Section mismatches: WARNING: arch/x86/kernel/built-in.o(.text.unlikely+0x1752): Section mismatch in reference from the function cpumask_empty.constprop.3() to the variable .init.data:nmi_ipi_mask WARNING: arch/x86/built-in.o(.text.unlikely+0x1a6a): Section mismatch in reference from the function cpumask_empty.constprop.3() to the variable .init.data:nmi_ipi_mask WARNING: vmlinux.o(.text.unlikely+0x1b31): Section mismatch in reference from the function cpumask_empty.constprop.3() to the variable .init.data:nmi_ipi_mask -------------------------------------------------------------------------------- allnoconfig (mips) — FAIL, 96 errors, 3 warnings, 0 section mismatches Errors: arch/mips/kernel/r4k_fpu.S:68: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f0,272+0($4)' arch/mips/kernel/r4k_fpu.S:69: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f2,272+16($4)' arch/mips/kernel/r4k_fpu.S:70: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f4,272+32($4)' arch/mips/kernel/r4k_fpu.S:71: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f6,272+48($4)' arch/mips/kernel/r4k_fpu.S:72: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f8,272+64($4)' arch/mips/kernel/r4k_fpu.S:73: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f10,272+80($4)' arch/mips/kernel/r4k_fpu.S:74: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f12,272+96($4)' arch/mips/kernel/r4k_fpu.S:75: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f14,272+112($4)' arch/mips/kernel/r4k_fpu.S:76: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f16,272+128($4)' arch/mips/kernel/r4k_fpu.S:77: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f18,272+144($4)' arch/mips/kernel/r4k_fpu.S:78: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f20,272+160($4)' arch/mips/kernel/r4k_fpu.S:79: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f22,272+176($4)' arch/mips/kernel/r4k_fpu.S:80: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f24,272+192($4)' arch/mips/kernel/r4k_fpu.S:81: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f26,272+208($4)' arch/mips/kernel/r4k_fpu.S:82: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f28,272+224($4)' arch/mips/kernel/r4k_fpu.S:83: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f30,272+240($4)' arch/mips/kernel/r4k_fpu.S:178: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f0,272+0($4)' arch/mips/kernel/r4k_fpu.S:179: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f2,272+16($4)' arch/mips/kernel/r4k_fpu.S:180: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f4,272+32($4)' arch/mips/kernel/r4k_fpu.S:181: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f6,272+48($4)' arch/mips/kernel/r4k_fpu.S:182: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f8,272+64($4)' arch/mips/kernel/r4k_fpu.S:183: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f10,272+80($4)' arch/mips/kernel/r4k_fpu.S:184: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f12,272+96($4)' arch/mips/kernel/r4k_fpu.S:185: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f14,272+112($4)' arch/mips/kernel/r4k_fpu.S:186: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f16,272+128($4)' arch/mips/kernel/r4k_fpu.S:187: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f18,272+144($4)' arch/mips/kernel/r4k_fpu.S:188: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f20,272+160($4)' arch/mips/kernel/r4k_fpu.S:189: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f22,272+176($4)' arch/mips/kernel/r4k_fpu.S:190: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f24,272+192($4)' arch/mips/kernel/r4k_fpu.S:191: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f26,272+208($4)' arch/mips/kernel/r4k_fpu.S:192: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f28,272+224($4)' arch/mips/kernel/r4k_fpu.S:193: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f30,272+240($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f0,656($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f2,672($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f4,688($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f6,704($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f8,720($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f10,736($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f12,752($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f14,768($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f16,784($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f18,800($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f20,816($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f22,832($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f24,848($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f26,864($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f28,880($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f30,896($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f0,656($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f2,672($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f4,688($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f6,704($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f8,720($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f10,736($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f12,752($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f14,768($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f16,784($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f18,800($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f20,816($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f22,832($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f24,848($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f26,864($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f28,880($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: r4600 (mips3) `sdc1 $f30,896($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: r4600 (mips3) `ldc1 $f0,656($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: r4600 (mips3) `ldc1 $f2,672($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: r4600 (mips3) `ldc1 $f4,688($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: r4600 (mips3) `ldc1 $f6,704($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: r4600 (mips3) `ldc1 $f8,720($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: r4600 (mips3) `ldc1 $f10,736($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: r4600 (mips3) `ldc1 $f12,752($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: r4600 (mips3) `ldc1 $f14,768($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: r4600 (mips3) `ldc1 $f16,784($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: r4600 (mips3) `ldc1 $f18,800($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: r4600 (mips3) `ldc1 $f20,816($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: r4600 (mips3) `ldc1 $f22,832($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: r4600 (mips3) `ldc1 $f24,848($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: r4600 (mips3) `ldc1 $f26,864($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: r4600 (mips3) `ldc1 $f28,880($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: r4600 (mips3) `ldc1 $f30,896($4)' arch/mips/kernel/r4k_switch.S:268: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f0' arch/mips/kernel/r4k_switch.S:269: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f2' arch/mips/kernel/r4k_switch.S:270: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f4' arch/mips/kernel/r4k_switch.S:271: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f6' arch/mips/kernel/r4k_switch.S:272: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f8' arch/mips/kernel/r4k_switch.S:273: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f10' arch/mips/kernel/r4k_switch.S:274: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f12' arch/mips/kernel/r4k_switch.S:275: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f14' arch/mips/kernel/r4k_switch.S:276: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f16' arch/mips/kernel/r4k_switch.S:277: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f18' arch/mips/kernel/r4k_switch.S:278: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f20' arch/mips/kernel/r4k_switch.S:279: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f22' arch/mips/kernel/r4k_switch.S:280: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f24' arch/mips/kernel/r4k_switch.S:281: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f26' arch/mips/kernel/r4k_switch.S:282: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f28' arch/mips/kernel/r4k_switch.S:283: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f30' Warnings: mm/page_alloc.c:5328:34: warning: array subscript is below array bounds [-Warray-bounds] fs/namespace.c:2787:6: warning: 'kernel_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] fs/namespace.c:2787:6: warning: 'kernel_type' may be used uninitialized in this function [-Wmaybe-uninitialized] -------------------------------------------------------------------------------- allnoconfig (x86) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: fs/namespace.c:2787:6: warning: 'kernel_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] fs/namespace.c:2787:6: warning: 'kernel_type' may be used uninitialized in this function [-Wmaybe-uninitialized] -------------------------------------------------------------------------------- at91sam9g45_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/iio/industrialio-core.c:408:23: warning: format '%u' expects argument of type 'unsigned int', but argument 4 has type 'long int' [-Wformat=] include/linux/blkdev.h:623:26: warning: switch condition has boolean value [-Wswitch-bool] -------------------------------------------------------------------------------- at91x40_defconfig (arm) — PASS, 0 errors, 3 warnings, 0 section mismatches Warnings: fs/namespace.c:2787:6: warning: 'kernel_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] fs/namespace.c:2787:6: warning: 'kernel_type' may be used uninitialized in this function [-Wmaybe-uninitialized] include/linux/blkdev.h:623:26: warning: switch condition has boolean value [-Wswitch-bool] -------------------------------------------------------------------------------- badge4_defconfig (arm) — PASS, 0 errors, 3 warnings, 0 section mismatches Warnings: fs/namespace.c:2787:6: warning: 'kernel_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] fs/namespace.c:2787:6: warning: 'kernel_type' may be used uninitialized in this function [-Wmaybe-uninitialized] include/linux/blkdev.h:623:26: warning: switch condition has boolean value [-Wswitch-bool] -------------------------------------------------------------------------------- cm_x300_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: fs/namespace.c:2787:6: warning: 'kernel_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] fs/namespace.c:2787:6: warning: 'kernel_type' may be used uninitialized in this function [-Wmaybe-uninitialized] include/linux/blkdev.h:623:26: warning: switch condition has boolean value [-Wswitch-bool] fs/nfs/nfs4proc.c:3005:10: warning: switch condition has boolean value [-Wswitch-bool] -------------------------------------------------------------------------------- colibri_pxa270_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: fs/namespace.c:2787:6: warning: 'kernel_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] fs/namespace.c:2787:6: warning: 'kernel_type' may be used uninitialized in this function [-Wmaybe-uninitialized] include/linux/blkdev.h:623:26: warning: switch condition has boolean value [-Wswitch-bool] fs/nfs/nfs4proc.c:3005:10: warning: switch condition has boolean value [-Wswitch-bool] -------------------------------------------------------------------------------- collie_defconfig (arm) — PASS, 0 errors, 3 warnings, 0 section mismatches Warnings: fs/namespace.c:2787:6: warning: 'kernel_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] fs/namespace.c:2787:6: warning: 'kernel_type' may be used uninitialized in this function [-Wmaybe-uninitialized] include/linux/blkdev.h:623:26: warning: switch condition has boolean value [-Wswitch-bool] -------------------------------------------------------------------------------- davinci_all_defconfig (arm) — PASS, 0 errors, 3 warnings, 0 section mismatches Warnings: fs/namespace.c:2787:6: warning: 'kernel_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] fs/namespace.c:2787:6: warning: 'kernel_type' may be used uninitialized in this function [-Wmaybe-uninitialized] include/linux/blkdev.h:623:26: warning: switch condition has boolean value [-Wswitch-bool] -------------------------------------------------------------------------------- defconfig (arm64) — PASS, 0 errors, 5 warnings, 0 section mismatches Warnings: ipc/sem.c:377:6: warning: '___p1' may be used uninitialized in this function [-Wmaybe-uninitialized] ipc/sem.c:377:6: warning: '___p1' may be used uninitialized in this function [-Wmaybe-uninitialized] arch/arm64/include/asm/pgtable.h:40:28: warning: suggest parentheses around assignment used as truth value [-Wparentheses] fs/namespace.c:2787:8: warning: 'kernel_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] fs/namespace.c:2787:8: warning: 'kernel_type' may be used uninitialized in this function [-Wmaybe-uninitialized] -------------------------------------------------------------------------------- defconfig+CONFIG_LKDTM=y (arm64) — PASS, 0 errors, 5 warnings, 0 section mismatches Warnings: ipc/sem.c:377:6: warning: '___p1' may be used uninitialized in this function [-Wmaybe-uninitialized] ipc/sem.c:377:6: warning: '___p1' may be used uninitialized in this function [-Wmaybe-uninitialized] fs/namespace.c:2787:8: warning: 'kernel_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] fs/namespace.c:2787:8: warning: 'kernel_type' may be used uninitialized in this function [-Wmaybe-uninitialized] arch/arm64/include/asm/pgtable.h:40:28: warning: suggest parentheses around assignment used as truth value [-Wparentheses] -------------------------------------------------------------------------------- gpr_defconfig (mips) — FAIL, 112 errors, 6 warnings, 0 section mismatches Errors: arch/mips/kernel/r4k_fpu.S:68: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f0,272+0($4)' arch/mips/kernel/r4k_fpu.S:69: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f2,272+16($4)' arch/mips/kernel/r4k_fpu.S:70: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f4,272+32($4)' arch/mips/kernel/r4k_fpu.S:71: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f6,272+48($4)' arch/mips/kernel/r4k_fpu.S:72: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f8,272+64($4)' arch/mips/kernel/r4k_fpu.S:73: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f10,272+80($4)' arch/mips/kernel/r4k_fpu.S:74: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f12,272+96($4)' arch/mips/kernel/r4k_fpu.S:75: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f14,272+112($4)' arch/mips/kernel/r4k_fpu.S:76: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f16,272+128($4)' arch/mips/kernel/r4k_fpu.S:77: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f18,272+144($4)' arch/mips/kernel/r4k_fpu.S:78: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f20,272+160($4)' arch/mips/kernel/r4k_fpu.S:79: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f22,272+176($4)' arch/mips/kernel/r4k_fpu.S:80: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f24,272+192($4)' arch/mips/kernel/r4k_fpu.S:81: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f26,272+208($4)' arch/mips/kernel/r4k_fpu.S:82: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f28,272+224($4)' arch/mips/kernel/r4k_fpu.S:83: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f30,272+240($4)' arch/mips/kernel/r4k_fpu.S:178: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f0,272+0($4)' arch/mips/kernel/r4k_fpu.S:179: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f2,272+16($4)' arch/mips/kernel/r4k_fpu.S:180: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f4,272+32($4)' arch/mips/kernel/r4k_fpu.S:181: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f6,272+48($4)' arch/mips/kernel/r4k_fpu.S:182: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f8,272+64($4)' arch/mips/kernel/r4k_fpu.S:183: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f10,272+80($4)' arch/mips/kernel/r4k_fpu.S:184: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f12,272+96($4)' arch/mips/kernel/r4k_fpu.S:185: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f14,272+112($4)' arch/mips/kernel/r4k_fpu.S:186: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f16,272+128($4)' arch/mips/kernel/r4k_fpu.S:187: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f18,272+144($4)' arch/mips/kernel/r4k_fpu.S:188: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f20,272+160($4)' arch/mips/kernel/r4k_fpu.S:189: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f22,272+176($4)' arch/mips/kernel/r4k_fpu.S:190: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f24,272+192($4)' arch/mips/kernel/r4k_fpu.S:191: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f26,272+208($4)' arch/mips/kernel/r4k_fpu.S:192: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f28,272+224($4)' arch/mips/kernel/r4k_fpu.S:193: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f30,272+240($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f0,664($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f2,680($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f4,696($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f6,712($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f8,728($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f10,744($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f12,760($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f14,776($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f16,792($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f18,808($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f20,824($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f22,840($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f24,856($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f26,872($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f28,888($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f30,904($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f0,664($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f2,680($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f4,696($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f6,712($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f8,728($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f10,744($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f12,760($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f14,776($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f16,792($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f18,808($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f20,824($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f22,840($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f24,856($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f26,872($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f28,888($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f30,904($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32 (mips32) `ldc1 $f0,664($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32 (mips32) `ldc1 $f2,680($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32 (mips32) `ldc1 $f4,696($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32 (mips32) `ldc1 $f6,712($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32 (mips32) `ldc1 $f8,728($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32 (mips32) `ldc1 $f10,744($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32 (mips32) `ldc1 $f12,760($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32 (mips32) `ldc1 $f14,776($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32 (mips32) `ldc1 $f16,792($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32 (mips32) `ldc1 $f18,808($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32 (mips32) `ldc1 $f20,824($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32 (mips32) `ldc1 $f22,840($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32 (mips32) `ldc1 $f24,856($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32 (mips32) `ldc1 $f26,872($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32 (mips32) `ldc1 $f28,888($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32 (mips32) `ldc1 $f30,904($4)' arch/mips/kernel/r4k_switch.S:193: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f0' arch/mips/kernel/r4k_switch.S:194: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f1' arch/mips/kernel/r4k_switch.S:195: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f2' arch/mips/kernel/r4k_switch.S:196: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f3' arch/mips/kernel/r4k_switch.S:197: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f4' arch/mips/kernel/r4k_switch.S:198: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f5' arch/mips/kernel/r4k_switch.S:199: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f6' arch/mips/kernel/r4k_switch.S:200: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f7' arch/mips/kernel/r4k_switch.S:201: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f8' arch/mips/kernel/r4k_switch.S:202: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f9' arch/mips/kernel/r4k_switch.S:203: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f10' arch/mips/kernel/r4k_switch.S:204: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f11' arch/mips/kernel/r4k_switch.S:205: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f12' arch/mips/kernel/r4k_switch.S:206: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f13' arch/mips/kernel/r4k_switch.S:207: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f14' arch/mips/kernel/r4k_switch.S:208: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f15' arch/mips/kernel/r4k_switch.S:209: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f16' arch/mips/kernel/r4k_switch.S:210: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f17' arch/mips/kernel/r4k_switch.S:211: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f18' arch/mips/kernel/r4k_switch.S:212: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f19' arch/mips/kernel/r4k_switch.S:213: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f20' arch/mips/kernel/r4k_switch.S:214: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f21' arch/mips/kernel/r4k_switch.S:215: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f22' arch/mips/kernel/r4k_switch.S:216: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f23' arch/mips/kernel/r4k_switch.S:217: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f24' arch/mips/kernel/r4k_switch.S:218: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f25' arch/mips/kernel/r4k_switch.S:219: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f26' arch/mips/kernel/r4k_switch.S:220: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f27' arch/mips/kernel/r4k_switch.S:221: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f28' arch/mips/kernel/r4k_switch.S:222: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f29' arch/mips/kernel/r4k_switch.S:223: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f30' arch/mips/kernel/r4k_switch.S:224: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f31' Warnings: mm/page_alloc.c:5328:34: warning: array subscript is below array bounds [-Warray-bounds] fs/namespace.c:2787:6: warning: 'kernel_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] fs/namespace.c:2787:6: warning: 'kernel_type' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/atm/iphase.c:1176:12: warning: this 'if' clause does not guard... [-Wmisleading-indentation] crypto/wp512.c:987:1: warning: the frame size of 1112 bytes is larger than 1024 bytes [-Wframe-larger-than=] drivers/mtd/mtd_blkdevs.c:100:2: warning: switch condition has boolean value [-Wswitch-bool] -------------------------------------------------------------------------------- h5000_defconfig (arm) — PASS, 0 errors, 3 warnings, 0 section mismatches Warnings: fs/namespace.c:2787:6: warning: 'kernel_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] fs/namespace.c:2787:6: warning: 'kernel_type' may be used uninitialized in this function [-Wmaybe-uninitialized] include/linux/blkdev.h:623:26: warning: switch condition has boolean value [-Wswitch-bool] -------------------------------------------------------------------------------- hi3xxx_defconfig (arm) — PASS, 0 errors, 3 warnings, 0 section mismatches Warnings: fs/namespace.c:2787:6: warning: 'kernel_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] fs/namespace.c:2787:6: warning: 'kernel_type' may be used uninitialized in this function [-Wmaybe-uninitialized] fs/nfs/nfs4proc.c:3005:10: warning: switch condition has boolean value [-Wswitch-bool] -------------------------------------------------------------------------------- iop32x_defconfig (arm) — PASS, 0 errors, 3 warnings, 0 section mismatches Warnings: fs/namespace.c:2787:6: warning: 'kernel_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] fs/namespace.c:2787:6: warning: 'kernel_type' may be used uninitialized in this function [-Wmaybe-uninitialized] include/linux/blkdev.h:623:26: warning: switch condition has boolean value [-Wswitch-bool] -------------------------------------------------------------------------------- keystone_defconfig (arm) — PASS, 0 errors, 3 warnings, 0 section mismatches Warnings: fs/namespace.c:2787:6: warning: 'kernel_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] fs/namespace.c:2787:6: warning: 'kernel_type' may be used uninitialized in this function [-Wmaybe-uninitialized] include/linux/blkdev.h:623:26: warning: switch condition has boolean value [-Wswitch-bool] -------------------------------------------------------------------------------- mackerel_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: fs/namespace.c:2787:6: warning: 'kernel_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] fs/namespace.c:2787:6: warning: 'kernel_type' may be used uninitialized in this function [-Wmaybe-uninitialized] include/linux/blkdev.h:623:26: warning: switch condition has boolean value [-Wswitch-bool] fs/nfs/nfs4proc.c:3005:10: warning: switch condition has boolean value [-Wswitch-bool] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_EFI=y+CONFIG_ARM_LPAE=y (arm) — PASS, 0 errors, 7 warnings, 0 section mismatches Warnings: fs/namespace.c:2787:6: warning: 'kernel_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] fs/namespace.c:2787:6: warning: 'kernel_type' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/iio/industrialio-core.c:408:23: warning: format '%u' expects argument of type 'unsigned int', but argument 4 has type 'long int' [-Wformat=] drivers/mmc/host/sunxi-mmc.c:297:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c:1450:8: warning: 'skb' may be used uninitialized in this function [-Wmaybe-uninitialized] fs/nfs/nfs4proc.c:3005:10: warning: switch condition has boolean value [-Wswitch-bool] drivers/tty/serial/samsung.c:1234:6: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t {aka long long unsigned int}' [-Wformat=] -------------------------------------------------------------------------------- mvebu_v7_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: fs/namespace.c:2787:6: warning: 'kernel_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] fs/namespace.c:2787:6: warning: 'kernel_type' may be used uninitialized in this function [-Wmaybe-uninitialized] -------------------------------------------------------------------------------- nhk8815_defconfig (arm) — PASS, 0 errors, 3 warnings, 0 section mismatches Warnings: fs/namespace.c:2787:6: warning: 'kernel_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] fs/namespace.c:2787:6: warning: 'kernel_type' may be used uninitialized in this function [-Wmaybe-uninitialized] include/linux/blkdev.h:623:26: warning: switch condition has boolean value [-Wswitch-bool] -------------------------------------------------------------------------------- nuc910_defconfig (arm) — PASS, 0 errors, 3 warnings, 0 section mismatches Warnings: fs/namespace.c:2787:6: warning: 'kernel_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] fs/namespace.c:2787:6: warning: 'kernel_type' may be used uninitialized in this function [-Wmaybe-uninitialized] include/linux/blkdev.h:623:26: warning: switch condition has boolean value [-Wswitch-bool] -------------------------------------------------------------------------------- nuc950_defconfig (arm) — PASS, 0 errors, 3 warnings, 0 section mismatches Warnings: fs/namespace.c:2787:6: warning: 'kernel_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] fs/namespace.c:2787:6: warning: 'kernel_type' may be used uninitialized in this function [-Wmaybe-uninitialized] include/linux/blkdev.h:623:26: warning: switch condition has boolean value [-Wswitch-bool] -------------------------------------------------------------------------------- rb532_defconfig (mips) — FAIL, 112 errors, 4 warnings, 0 section mismatches Errors: arch/mips/kernel/r4k_fpu.S:68: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f0,272+0($4)' arch/mips/kernel/r4k_fpu.S:69: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f2,272+16($4)' arch/mips/kernel/r4k_fpu.S:70: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f4,272+32($4)' arch/mips/kernel/r4k_fpu.S:71: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f6,272+48($4)' arch/mips/kernel/r4k_fpu.S:72: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f8,272+64($4)' arch/mips/kernel/r4k_fpu.S:73: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f10,272+80($4)' arch/mips/kernel/r4k_fpu.S:74: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f12,272+96($4)' arch/mips/kernel/r4k_fpu.S:75: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f14,272+112($4)' arch/mips/kernel/r4k_fpu.S:76: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f16,272+128($4)' arch/mips/kernel/r4k_fpu.S:77: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f18,272+144($4)' arch/mips/kernel/r4k_fpu.S:78: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f20,272+160($4)' arch/mips/kernel/r4k_fpu.S:79: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f22,272+176($4)' arch/mips/kernel/r4k_fpu.S:80: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f24,272+192($4)' arch/mips/kernel/r4k_fpu.S:81: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f26,272+208($4)' arch/mips/kernel/r4k_fpu.S:82: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f28,272+224($4)' arch/mips/kernel/r4k_fpu.S:83: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f30,272+240($4)' arch/mips/kernel/r4k_fpu.S:178: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f0,272+0($4)' arch/mips/kernel/r4k_fpu.S:179: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f2,272+16($4)' arch/mips/kernel/r4k_fpu.S:180: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f4,272+32($4)' arch/mips/kernel/r4k_fpu.S:181: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f6,272+48($4)' arch/mips/kernel/r4k_fpu.S:182: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f8,272+64($4)' arch/mips/kernel/r4k_fpu.S:183: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f10,272+80($4)' arch/mips/kernel/r4k_fpu.S:184: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f12,272+96($4)' arch/mips/kernel/r4k_fpu.S:185: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f14,272+112($4)' arch/mips/kernel/r4k_fpu.S:186: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f16,272+128($4)' arch/mips/kernel/r4k_fpu.S:187: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f18,272+144($4)' arch/mips/kernel/r4k_fpu.S:188: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f20,272+160($4)' arch/mips/kernel/r4k_fpu.S:189: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f22,272+176($4)' arch/mips/kernel/r4k_fpu.S:190: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f24,272+192($4)' arch/mips/kernel/r4k_fpu.S:191: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f26,272+208($4)' arch/mips/kernel/r4k_fpu.S:192: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f28,272+224($4)' arch/mips/kernel/r4k_fpu.S:193: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f30,272+240($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f0,664($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f2,680($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f4,696($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f6,712($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f8,728($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f10,744($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f12,760($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f14,776($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f16,792($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f18,808($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f20,824($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f22,840($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f24,856($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f26,872($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f28,888($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f30,904($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f0,664($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f2,680($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f4,696($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f6,712($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f8,728($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f10,744($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f12,760($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f14,776($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f16,792($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f18,808($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f20,824($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f22,840($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f24,856($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f26,872($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f28,888($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32 (mips32) `sdc1 $f30,904($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32 (mips32) `ldc1 $f0,664($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32 (mips32) `ldc1 $f2,680($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32 (mips32) `ldc1 $f4,696($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32 (mips32) `ldc1 $f6,712($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32 (mips32) `ldc1 $f8,728($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32 (mips32) `ldc1 $f10,744($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32 (mips32) `ldc1 $f12,760($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32 (mips32) `ldc1 $f14,776($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32 (mips32) `ldc1 $f16,792($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32 (mips32) `ldc1 $f18,808($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32 (mips32) `ldc1 $f20,824($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32 (mips32) `ldc1 $f22,840($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32 (mips32) `ldc1 $f24,856($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32 (mips32) `ldc1 $f26,872($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32 (mips32) `ldc1 $f28,888($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32 (mips32) `ldc1 $f30,904($4)' arch/mips/kernel/r4k_switch.S:193: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f0' arch/mips/kernel/r4k_switch.S:194: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f1' arch/mips/kernel/r4k_switch.S:195: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f2' arch/mips/kernel/r4k_switch.S:196: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f3' arch/mips/kernel/r4k_switch.S:197: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f4' arch/mips/kernel/r4k_switch.S:198: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f5' arch/mips/kernel/r4k_switch.S:199: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f6' arch/mips/kernel/r4k_switch.S:200: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f7' arch/mips/kernel/r4k_switch.S:201: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f8' arch/mips/kernel/r4k_switch.S:202: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f9' arch/mips/kernel/r4k_switch.S:203: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f10' arch/mips/kernel/r4k_switch.S:204: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f11' arch/mips/kernel/r4k_switch.S:205: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f12' arch/mips/kernel/r4k_switch.S:206: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f13' arch/mips/kernel/r4k_switch.S:207: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f14' arch/mips/kernel/r4k_switch.S:208: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f15' arch/mips/kernel/r4k_switch.S:209: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f16' arch/mips/kernel/r4k_switch.S:210: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f17' arch/mips/kernel/r4k_switch.S:211: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f18' arch/mips/kernel/r4k_switch.S:212: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f19' arch/mips/kernel/r4k_switch.S:213: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f20' arch/mips/kernel/r4k_switch.S:214: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f21' arch/mips/kernel/r4k_switch.S:215: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f22' arch/mips/kernel/r4k_switch.S:216: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f23' arch/mips/kernel/r4k_switch.S:217: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f24' arch/mips/kernel/r4k_switch.S:218: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f25' arch/mips/kernel/r4k_switch.S:219: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f26' arch/mips/kernel/r4k_switch.S:220: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f27' arch/mips/kernel/r4k_switch.S:221: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f28' arch/mips/kernel/r4k_switch.S:222: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f29' arch/mips/kernel/r4k_switch.S:223: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f30' arch/mips/kernel/r4k_switch.S:224: Error: opcode not supported on this processor: mips32 (mips32) `mtc1 $9,$f31' Warnings: mm/page_alloc.c:5328:34: warning: array subscript is below array bounds [-Warray-bounds] fs/namespace.c:2787:6: warning: 'kernel_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] fs/namespace.c:2787:6: warning: 'kernel_type' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/mtd/mtd_blkdevs.c:100:2: warning: switch condition has boolean value [-Wswitch-bool] -------------------------------------------------------------------------------- rt305x_defconfig (mips) — FAIL, 224 errors, 4 warnings, 0 section mismatches Errors: arch/mips/kernel/r4k_fpu.S:48: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f1,272+8($4)' arch/mips/kernel/r4k_fpu.S:49: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f3,272+24($4)' arch/mips/kernel/r4k_fpu.S:50: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f5,272+40($4)' arch/mips/kernel/r4k_fpu.S:51: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f7,272+56($4)' arch/mips/kernel/r4k_fpu.S:52: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f9,272+72($4)' arch/mips/kernel/r4k_fpu.S:53: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f11,272+88($4)' arch/mips/kernel/r4k_fpu.S:54: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f13,272+104($4)' arch/mips/kernel/r4k_fpu.S:55: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f15,272+120($4)' arch/mips/kernel/r4k_fpu.S:56: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f17,272+136($4)' arch/mips/kernel/r4k_fpu.S:57: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f19,272+152($4)' arch/mips/kernel/r4k_fpu.S:58: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f21,272+168($4)' arch/mips/kernel/r4k_fpu.S:59: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f23,272+184($4)' arch/mips/kernel/r4k_fpu.S:60: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f25,272+200($4)' arch/mips/kernel/r4k_fpu.S:61: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f27,272+216($4)' arch/mips/kernel/r4k_fpu.S:62: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f29,272+232($4)' arch/mips/kernel/r4k_fpu.S:63: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f31,272+248($4)' arch/mips/kernel/r4k_fpu.S:68: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f0,272+0($4)' arch/mips/kernel/r4k_fpu.S:69: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f2,272+16($4)' arch/mips/kernel/r4k_fpu.S:70: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f4,272+32($4)' arch/mips/kernel/r4k_fpu.S:71: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f6,272+48($4)' arch/mips/kernel/r4k_fpu.S:72: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f8,272+64($4)' arch/mips/kernel/r4k_fpu.S:73: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f10,272+80($4)' arch/mips/kernel/r4k_fpu.S:74: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f12,272+96($4)' arch/mips/kernel/r4k_fpu.S:75: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f14,272+112($4)' arch/mips/kernel/r4k_fpu.S:76: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f16,272+128($4)' arch/mips/kernel/r4k_fpu.S:77: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f18,272+144($4)' arch/mips/kernel/r4k_fpu.S:78: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f20,272+160($4)' arch/mips/kernel/r4k_fpu.S:79: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f22,272+176($4)' arch/mips/kernel/r4k_fpu.S:80: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f24,272+192($4)' arch/mips/kernel/r4k_fpu.S:81: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f26,272+208($4)' arch/mips/kernel/r4k_fpu.S:82: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f28,272+224($4)' arch/mips/kernel/r4k_fpu.S:83: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f30,272+240($4)' arch/mips/kernel/r4k_fpu.S:160: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f1,272+8($4)' arch/mips/kernel/r4k_fpu.S:161: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f3,272+24($4)' arch/mips/kernel/r4k_fpu.S:162: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f5,272+40($4)' arch/mips/kernel/r4k_fpu.S:163: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f7,272+56($4)' arch/mips/kernel/r4k_fpu.S:164: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f9,272+72($4)' arch/mips/kernel/r4k_fpu.S:165: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f11,272+88($4)' arch/mips/kernel/r4k_fpu.S:166: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f13,272+104($4)' arch/mips/kernel/r4k_fpu.S:167: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f15,272+120($4)' arch/mips/kernel/r4k_fpu.S:168: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f17,272+136($4)' arch/mips/kernel/r4k_fpu.S:169: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f19,272+152($4)' arch/mips/kernel/r4k_fpu.S:170: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f21,272+168($4)' arch/mips/kernel/r4k_fpu.S:171: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f23,272+184($4)' arch/mips/kernel/r4k_fpu.S:172: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f25,272+200($4)' arch/mips/kernel/r4k_fpu.S:173: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f27,272+216($4)' arch/mips/kernel/r4k_fpu.S:174: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f29,272+232($4)' arch/mips/kernel/r4k_fpu.S:175: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f31,272+248($4)' arch/mips/kernel/r4k_fpu.S:178: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f0,272+0($4)' arch/mips/kernel/r4k_fpu.S:179: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f2,272+16($4)' arch/mips/kernel/r4k_fpu.S:180: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f4,272+32($4)' arch/mips/kernel/r4k_fpu.S:181: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f6,272+48($4)' arch/mips/kernel/r4k_fpu.S:182: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f8,272+64($4)' arch/mips/kernel/r4k_fpu.S:183: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f10,272+80($4)' arch/mips/kernel/r4k_fpu.S:184: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f12,272+96($4)' arch/mips/kernel/r4k_fpu.S:185: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f14,272+112($4)' arch/mips/kernel/r4k_fpu.S:186: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f16,272+128($4)' arch/mips/kernel/r4k_fpu.S:187: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f18,272+144($4)' arch/mips/kernel/r4k_fpu.S:188: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f20,272+160($4)' arch/mips/kernel/r4k_fpu.S:189: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f22,272+176($4)' arch/mips/kernel/r4k_fpu.S:190: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f24,272+192($4)' arch/mips/kernel/r4k_fpu.S:191: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f26,272+208($4)' arch/mips/kernel/r4k_fpu.S:192: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f28,272+224($4)' arch/mips/kernel/r4k_fpu.S:193: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f30,272+240($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f1,680($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f3,712($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f5,744($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f7,776($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f9,808($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f11,840($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f13,872($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f15,904($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f17,936($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f19,968($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f21,1000($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f23,1032($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f25,1064($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f27,1096($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f29,1128($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f31,1160($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f0,664($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f2,696($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f4,728($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f6,760($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f8,792($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f10,824($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f12,856($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f14,888($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f16,920($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f18,952($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f20,984($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f22,1016($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f24,1048($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f26,1080($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f28,1112($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f30,1144($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f1,680($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f3,712($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f5,744($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f7,776($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f9,808($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f11,840($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f13,872($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f15,904($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f17,936($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f19,968($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f21,1000($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f23,1032($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f25,1064($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f27,1096($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f29,1128($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f31,1160($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f0,664($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f2,696($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f4,728($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f6,760($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f8,792($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f10,824($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f12,856($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f14,888($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f16,920($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f18,952($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f20,984($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f22,1016($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f24,1048($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f26,1080($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f28,1112($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f30,1144($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f1,680($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f3,712($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f5,744($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f7,776($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f9,808($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f11,840($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f13,872($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f15,904($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f17,936($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f19,968($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f21,1000($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f23,1032($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f25,1064($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f27,1096($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f29,1128($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f31,1160($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ldc1 $f0,664($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ldc1 $f2,696($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ldc1 $f4,728($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ldc1 $f6,760($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ldc1 $f8,792($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ldc1 $f10,824($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ldc1 $f12,856($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ldc1 $f14,888($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ldc1 $f16,920($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ldc1 $f18,952($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ldc1 $f20,984($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ldc1 $f22,1016($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ldc1 $f24,1048($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ldc1 $f26,1080($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ldc1 $f28,1112($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ldc1 $f30,1144($4)' arch/mips/kernel/r4k_switch.S:193: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f0' arch/mips/kernel/r4k_switch.S:194: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f1' arch/mips/kernel/r4k_switch.S:195: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f2' arch/mips/kernel/r4k_switch.S:196: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f3' arch/mips/kernel/r4k_switch.S:197: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f4' arch/mips/kernel/r4k_switch.S:198: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f5' arch/mips/kernel/r4k_switch.S:199: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f6' arch/mips/kernel/r4k_switch.S:200: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f7' arch/mips/kernel/r4k_switch.S:201: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f8' arch/mips/kernel/r4k_switch.S:202: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f9' arch/mips/kernel/r4k_switch.S:203: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f10' arch/mips/kernel/r4k_switch.S:204: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f11' arch/mips/kernel/r4k_switch.S:205: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f12' arch/mips/kernel/r4k_switch.S:206: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f13' arch/mips/kernel/r4k_switch.S:207: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f14' arch/mips/kernel/r4k_switch.S:208: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f15' arch/mips/kernel/r4k_switch.S:209: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f16' arch/mips/kernel/r4k_switch.S:210: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f17' arch/mips/kernel/r4k_switch.S:211: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f18' arch/mips/kernel/r4k_switch.S:212: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f19' arch/mips/kernel/r4k_switch.S:213: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f20' arch/mips/kernel/r4k_switch.S:214: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f21' arch/mips/kernel/r4k_switch.S:215: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f22' arch/mips/kernel/r4k_switch.S:216: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f23' arch/mips/kernel/r4k_switch.S:217: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f24' arch/mips/kernel/r4k_switch.S:218: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f25' arch/mips/kernel/r4k_switch.S:219: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f26' arch/mips/kernel/r4k_switch.S:220: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f27' arch/mips/kernel/r4k_switch.S:221: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f28' arch/mips/kernel/r4k_switch.S:222: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f29' arch/mips/kernel/r4k_switch.S:223: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f30' arch/mips/kernel/r4k_switch.S:224: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f31' arch/mips/kernel/r4k_switch.S:232: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f0' arch/mips/kernel/r4k_switch.S:233: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f1' arch/mips/kernel/r4k_switch.S:234: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f2' arch/mips/kernel/r4k_switch.S:235: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f3' arch/mips/kernel/r4k_switch.S:236: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f4' arch/mips/kernel/r4k_switch.S:237: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f5' arch/mips/kernel/r4k_switch.S:238: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f6' arch/mips/kernel/r4k_switch.S:239: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f7' arch/mips/kernel/r4k_switch.S:240: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f8' arch/mips/kernel/r4k_switch.S:241: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f9' arch/mips/kernel/r4k_switch.S:242: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f10' arch/mips/kernel/r4k_switch.S:243: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f11' arch/mips/kernel/r4k_switch.S:244: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f12' arch/mips/kernel/r4k_switch.S:245: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f13' arch/mips/kernel/r4k_switch.S:246: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f14' arch/mips/kernel/r4k_switch.S:247: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f15' arch/mips/kernel/r4k_switch.S:248: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f16' arch/mips/kernel/r4k_switch.S:249: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f17' arch/mips/kernel/r4k_switch.S:250: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f18' arch/mips/kernel/r4k_switch.S:251: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f19' arch/mips/kernel/r4k_switch.S:252: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f20' arch/mips/kernel/r4k_switch.S:253: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f21' arch/mips/kernel/r4k_switch.S:254: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f22' arch/mips/kernel/r4k_switch.S:255: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f23' arch/mips/kernel/r4k_switch.S:256: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f24' arch/mips/kernel/r4k_switch.S:257: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f25' arch/mips/kernel/r4k_switch.S:258: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f26' arch/mips/kernel/r4k_switch.S:259: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f27' arch/mips/kernel/r4k_switch.S:260: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f28' arch/mips/kernel/r4k_switch.S:261: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f29' arch/mips/kernel/r4k_switch.S:262: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f30' arch/mips/kernel/r4k_switch.S:263: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f31' Warnings: arch/mips/ralink/prom.c:64:2: warning: 'argc' is used uninitialized in this function [-Wuninitialized] arch/mips/ralink/prom.c:64:2: warning: 'argv' is used uninitialized in this function [-Wuninitialized] mm/page_alloc.c:5328:34: warning: array subscript is below array bounds [-Warray-bounds] drivers/mtd/mtd_blkdevs.c:100:2: warning: switch condition has boolean value [-Wswitch-bool] -------------------------------------------------------------------------------- s3c2410_defconfig (arm) — PASS, 0 errors, 3 warnings, 0 section mismatches Warnings: fs/namespace.c:2787:6: warning: 'kernel_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] fs/namespace.c:2787:6: warning: 'kernel_type' may be used uninitialized in this function [-Wmaybe-uninitialized] include/linux/blkdev.h:623:26: warning: switch condition has boolean value [-Wswitch-bool] -------------------------------------------------------------------------------- sb1250_swarm_defconfig (mips) — FAIL, 256 errors, 10 warnings, 0 section mismatches Errors: arch/mips/kernel/r4k_fpu.S:48: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f1,256+8($4)' arch/mips/kernel/r4k_fpu.S:49: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f3,256+24($4)' arch/mips/kernel/r4k_fpu.S:50: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f5,256+40($4)' arch/mips/kernel/r4k_fpu.S:51: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f7,256+56($4)' arch/mips/kernel/r4k_fpu.S:52: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f9,256+72($4)' arch/mips/kernel/r4k_fpu.S:53: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f11,256+88($4)' arch/mips/kernel/r4k_fpu.S:54: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f13,256+104($4)' arch/mips/kernel/r4k_fpu.S:55: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f15,256+120($4)' arch/mips/kernel/r4k_fpu.S:56: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f17,256+136($4)' arch/mips/kernel/r4k_fpu.S:57: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f19,256+152($4)' arch/mips/kernel/r4k_fpu.S:58: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f21,256+168($4)' arch/mips/kernel/r4k_fpu.S:59: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f23,256+184($4)' arch/mips/kernel/r4k_fpu.S:60: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f25,256+200($4)' arch/mips/kernel/r4k_fpu.S:61: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f27,256+216($4)' arch/mips/kernel/r4k_fpu.S:62: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f29,256+232($4)' arch/mips/kernel/r4k_fpu.S:63: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f31,256+248($4)' arch/mips/kernel/r4k_fpu.S:68: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f0,256+0($4)' arch/mips/kernel/r4k_fpu.S:69: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f2,256+16($4)' arch/mips/kernel/r4k_fpu.S:70: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f4,256+32($4)' arch/mips/kernel/r4k_fpu.S:71: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f6,256+48($4)' arch/mips/kernel/r4k_fpu.S:72: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f8,256+64($4)' arch/mips/kernel/r4k_fpu.S:73: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f10,256+80($4)' arch/mips/kernel/r4k_fpu.S:74: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f12,256+96($4)' arch/mips/kernel/r4k_fpu.S:75: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f14,256+112($4)' arch/mips/kernel/r4k_fpu.S:76: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f16,256+128($4)' arch/mips/kernel/r4k_fpu.S:77: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f18,256+144($4)' arch/mips/kernel/r4k_fpu.S:78: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f20,256+160($4)' arch/mips/kernel/r4k_fpu.S:79: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f22,256+176($4)' arch/mips/kernel/r4k_fpu.S:80: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f24,256+192($4)' arch/mips/kernel/r4k_fpu.S:81: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f26,256+208($4)' arch/mips/kernel/r4k_fpu.S:82: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f28,256+224($4)' arch/mips/kernel/r4k_fpu.S:83: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f30,256+240($4)' arch/mips/kernel/r4k_fpu.S:100: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f1,272+8($4)' arch/mips/kernel/r4k_fpu.S:101: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f3,272+24($4)' arch/mips/kernel/r4k_fpu.S:102: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f5,272+40($4)' arch/mips/kernel/r4k_fpu.S:103: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f7,272+56($4)' arch/mips/kernel/r4k_fpu.S:104: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f9,272+72($4)' arch/mips/kernel/r4k_fpu.S:105: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f11,272+88($4)' arch/mips/kernel/r4k_fpu.S:106: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f13,272+104($4)' arch/mips/kernel/r4k_fpu.S:107: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f15,272+120($4)' arch/mips/kernel/r4k_fpu.S:108: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f17,272+136($4)' arch/mips/kernel/r4k_fpu.S:109: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f19,272+152($4)' arch/mips/kernel/r4k_fpu.S:110: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f21,272+168($4)' arch/mips/kernel/r4k_fpu.S:111: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f23,272+184($4)' arch/mips/kernel/r4k_fpu.S:112: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f25,272+200($4)' arch/mips/kernel/r4k_fpu.S:113: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f27,272+216($4)' arch/mips/kernel/r4k_fpu.S:114: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f29,272+232($4)' arch/mips/kernel/r4k_fpu.S:115: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f31,272+248($4)' arch/mips/kernel/r4k_fpu.S:118: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f0,272+0($4)' arch/mips/kernel/r4k_fpu.S:119: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f2,272+16($4)' arch/mips/kernel/r4k_fpu.S:120: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f4,272+32($4)' arch/mips/kernel/r4k_fpu.S:121: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f6,272+48($4)' arch/mips/kernel/r4k_fpu.S:122: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f8,272+64($4)' arch/mips/kernel/r4k_fpu.S:123: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f10,272+80($4)' arch/mips/kernel/r4k_fpu.S:124: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f12,272+96($4)' arch/mips/kernel/r4k_fpu.S:125: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f14,272+112($4)' arch/mips/kernel/r4k_fpu.S:126: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f16,272+128($4)' arch/mips/kernel/r4k_fpu.S:127: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f18,272+144($4)' arch/mips/kernel/r4k_fpu.S:128: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f20,272+160($4)' arch/mips/kernel/r4k_fpu.S:129: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f22,272+176($4)' arch/mips/kernel/r4k_fpu.S:130: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f24,272+192($4)' arch/mips/kernel/r4k_fpu.S:131: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f26,272+208($4)' arch/mips/kernel/r4k_fpu.S:132: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f28,272+224($4)' arch/mips/kernel/r4k_fpu.S:133: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f30,272+240($4)' arch/mips/kernel/r4k_fpu.S:160: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f1,256+8($4)' arch/mips/kernel/r4k_fpu.S:161: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f3,256+24($4)' arch/mips/kernel/r4k_fpu.S:162: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f5,256+40($4)' arch/mips/kernel/r4k_fpu.S:163: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f7,256+56($4)' arch/mips/kernel/r4k_fpu.S:164: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f9,256+72($4)' arch/mips/kernel/r4k_fpu.S:165: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f11,256+88($4)' arch/mips/kernel/r4k_fpu.S:166: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f13,256+104($4)' arch/mips/kernel/r4k_fpu.S:167: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f15,256+120($4)' arch/mips/kernel/r4k_fpu.S:168: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f17,256+136($4)' arch/mips/kernel/r4k_fpu.S:169: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f19,256+152($4)' arch/mips/kernel/r4k_fpu.S:170: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f21,256+168($4)' arch/mips/kernel/r4k_fpu.S:171: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f23,256+184($4)' arch/mips/kernel/r4k_fpu.S:172: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f25,256+200($4)' arch/mips/kernel/r4k_fpu.S:173: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f27,256+216($4)' arch/mips/kernel/r4k_fpu.S:174: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f29,256+232($4)' arch/mips/kernel/r4k_fpu.S:175: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f31,256+248($4)' arch/mips/kernel/r4k_fpu.S:178: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f0,256+0($4)' arch/mips/kernel/r4k_fpu.S:179: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f2,256+16($4)' arch/mips/kernel/r4k_fpu.S:180: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f4,256+32($4)' arch/mips/kernel/r4k_fpu.S:181: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f6,256+48($4)' arch/mips/kernel/r4k_fpu.S:182: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f8,256+64($4)' arch/mips/kernel/r4k_fpu.S:183: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f10,256+80($4)' arch/mips/kernel/r4k_fpu.S:184: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f12,256+96($4)' arch/mips/kernel/r4k_fpu.S:185: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f14,256+112($4)' arch/mips/kernel/r4k_fpu.S:186: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f16,256+128($4)' arch/mips/kernel/r4k_fpu.S:187: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f18,256+144($4)' arch/mips/kernel/r4k_fpu.S:188: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f20,256+160($4)' arch/mips/kernel/r4k_fpu.S:189: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f22,256+176($4)' arch/mips/kernel/r4k_fpu.S:190: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f24,256+192($4)' arch/mips/kernel/r4k_fpu.S:191: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f26,256+208($4)' arch/mips/kernel/r4k_fpu.S:192: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f28,256+224($4)' arch/mips/kernel/r4k_fpu.S:193: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f30,256+240($4)' arch/mips/kernel/r4k_fpu.S:209: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f1,272+8($4)' arch/mips/kernel/r4k_fpu.S:210: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f3,272+24($4)' arch/mips/kernel/r4k_fpu.S:211: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f5,272+40($4)' arch/mips/kernel/r4k_fpu.S:212: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f7,272+56($4)' arch/mips/kernel/r4k_fpu.S:213: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f9,272+72($4)' arch/mips/kernel/r4k_fpu.S:214: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f11,272+88($4)' arch/mips/kernel/r4k_fpu.S:215: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f13,272+104($4)' arch/mips/kernel/r4k_fpu.S:216: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f15,272+120($4)' arch/mips/kernel/r4k_fpu.S:217: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f17,272+136($4)' arch/mips/kernel/r4k_fpu.S:218: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f19,272+152($4)' arch/mips/kernel/r4k_fpu.S:219: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f21,272+168($4)' arch/mips/kernel/r4k_fpu.S:220: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f23,272+184($4)' arch/mips/kernel/r4k_fpu.S:221: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f25,272+200($4)' arch/mips/kernel/r4k_fpu.S:222: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f27,272+216($4)' arch/mips/kernel/r4k_fpu.S:223: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f29,272+232($4)' arch/mips/kernel/r4k_fpu.S:224: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f31,272+248($4)' arch/mips/kernel/r4k_fpu.S:226: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f0,272+0($4)' arch/mips/kernel/r4k_fpu.S:227: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f2,272+16($4)' arch/mips/kernel/r4k_fpu.S:228: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f4,272+32($4)' arch/mips/kernel/r4k_fpu.S:229: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f6,272+48($4)' arch/mips/kernel/r4k_fpu.S:230: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f8,272+64($4)' arch/mips/kernel/r4k_fpu.S:231: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f10,272+80($4)' arch/mips/kernel/r4k_fpu.S:232: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f12,272+96($4)' arch/mips/kernel/r4k_fpu.S:233: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f14,272+112($4)' arch/mips/kernel/r4k_fpu.S:234: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f16,272+128($4)' arch/mips/kernel/r4k_fpu.S:235: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f18,272+144($4)' arch/mips/kernel/r4k_fpu.S:236: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f20,272+160($4)' arch/mips/kernel/r4k_fpu.S:237: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f22,272+176($4)' arch/mips/kernel/r4k_fpu.S:238: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f24,272+192($4)' arch/mips/kernel/r4k_fpu.S:239: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f26,272+208($4)' arch/mips/kernel/r4k_fpu.S:240: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f28,272+224($4)' arch/mips/kernel/r4k_fpu.S:241: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f30,272+240($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f1,1200($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f3,1216($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f5,1232($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f7,1248($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f9,1264($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f11,1280($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f13,1296($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f15,1312($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f17,1328($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f19,1344($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f21,1360($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f23,1376($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f25,1392($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f27,1408($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f29,1424($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f31,1440($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f0,1192($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f2,1208($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f4,1224($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f6,1240($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f8,1256($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f10,1272($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f12,1288($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f14,1304($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f16,1320($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f18,1336($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f20,1352($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f22,1368($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f24,1384($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f26,1400($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f28,1416($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f30,1432($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f1,1200($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f3,1216($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f5,1232($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f7,1248($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f9,1264($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f11,1280($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f13,1296($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f15,1312($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f17,1328($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f19,1344($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f21,1360($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f23,1376($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f25,1392($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f27,1408($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f29,1424($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f31,1440($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f0,1192($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f2,1208($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f4,1224($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f6,1240($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f8,1256($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f10,1272($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f12,1288($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f14,1304($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f16,1320($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f18,1336($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f20,1352($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f22,1368($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f24,1384($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f26,1400($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f28,1416($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: sb1 (mips64) `sdc1 $f30,1432($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f1,1200($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f3,1216($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f5,1232($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f7,1248($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f9,1264($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f11,1280($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f13,1296($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f15,1312($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f17,1328($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f19,1344($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f21,1360($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f23,1376($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f25,1392($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f27,1408($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f29,1424($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f31,1440($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: sb1 (mips64) `ldc1 $f0,1192($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: sb1 (mips64) `ldc1 $f2,1208($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: sb1 (mips64) `ldc1 $f4,1224($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: sb1 (mips64) `ldc1 $f6,1240($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: sb1 (mips64) `ldc1 $f8,1256($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: sb1 (mips64) `ldc1 $f10,1272($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: sb1 (mips64) `ldc1 $f12,1288($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: sb1 (mips64) `ldc1 $f14,1304($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: sb1 (mips64) `ldc1 $f16,1320($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: sb1 (mips64) `ldc1 $f18,1336($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: sb1 (mips64) `ldc1 $f20,1352($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: sb1 (mips64) `ldc1 $f22,1368($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: sb1 (mips64) `ldc1 $f24,1384($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: sb1 (mips64) `ldc1 $f26,1400($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: sb1 (mips64) `ldc1 $f28,1416($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: sb1 (mips64) `ldc1 $f30,1432($4)' arch/mips/kernel/r4k_switch.S:173: Error: opcode not supported on this processor: sb1 (mips64) `dmtc1 $13,$f1' arch/mips/kernel/r4k_switch.S:174: Error: opcode not supported on this processor: sb1 (mips64) `dmtc1 $13,$f3' arch/mips/kernel/r4k_switch.S:175: Error: opcode not supported on this processor: sb1 (mips64) `dmtc1 $13,$f5' arch/mips/kernel/r4k_switch.S:176: Error: opcode not supported on this processor: sb1 (mips64) `dmtc1 $13,$f7' arch/mips/kernel/r4k_switch.S:177: Error: opcode not supported on this processor: sb1 (mips64) `dmtc1 $13,$f9' arch/mips/kernel/r4k_switch.S:178: Error: opcode not supported on this processor: sb1 (mips64) `dmtc1 $13,$f11' arch/mips/kernel/r4k_switch.S:179: Error: opcode not supported on this processor: sb1 (mips64) `dmtc1 $13,$f13' arch/mips/kernel/r4k_switch.S:180: Error: opcode not supported on this processor: sb1 (mips64) `dmtc1 $13,$f15' arch/mips/kernel/r4k_switch.S:181: Error: opcode not supported on this processor: sb1 (mips64) `dmtc1 $13,$f17' arch/mips/kernel/r4k_switch.S:182: Error: opcode not supported on this processor: sb1 (mips64) `dmtc1 $13,$f19' arch/mips/kernel/r4k_switch.S:183: Error: opcode not supported on this processor: sb1 (mips64) `dmtc1 $13,$f21' arch/mips/kernel/r4k_switch.S:184: Error: opcode not supported on this processor: sb1 (mips64) `dmtc1 $13,$f23' arch/mips/kernel/r4k_switch.S:185: Error: opcode not supported on this processor: sb1 (mips64) `dmtc1 $13,$f25' arch/mips/kernel/r4k_switch.S:186: Error: opcode not supported on this processor: sb1 (mips64) `dmtc1 $13,$f27' arch/mips/kernel/r4k_switch.S:187: Error: opcode not supported on this processor: sb1 (mips64) `dmtc1 $13,$f29' arch/mips/kernel/r4k_switch.S:188: Error: opcode not supported on this processor: sb1 (mips64) `dmtc1 $13,$f31' arch/mips/kernel/r4k_switch.S:268: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $13,$f0' arch/mips/kernel/r4k_switch.S:269: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $13,$f2' arch/mips/kernel/r4k_switch.S:270: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $13,$f4' arch/mips/kernel/r4k_switch.S:271: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $13,$f6' arch/mips/kernel/r4k_switch.S:272: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $13,$f8' arch/mips/kernel/r4k_switch.S:273: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $13,$f10' arch/mips/kernel/r4k_switch.S:274: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $13,$f12' arch/mips/kernel/r4k_switch.S:275: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $13,$f14' arch/mips/kernel/r4k_switch.S:276: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $13,$f16' arch/mips/kernel/r4k_switch.S:277: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $13,$f18' arch/mips/kernel/r4k_switch.S:278: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $13,$f20' arch/mips/kernel/r4k_switch.S:279: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $13,$f22' arch/mips/kernel/r4k_switch.S:280: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $13,$f24' arch/mips/kernel/r4k_switch.S:281: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $13,$f26' arch/mips/kernel/r4k_switch.S:282: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $13,$f28' arch/mips/kernel/r4k_switch.S:283: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $13,$f30' Warnings: fs/namespace.c:2787:8: warning: 'kernel_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] fs/namespace.c:2787:8: warning: 'kernel_type' may be used uninitialized in this function [-Wmaybe-uninitialized] arch/mips/include/asm/compat.h:208:24: warning: 'handler' may be used uninitialized in this function [-Wmaybe-uninitialized] arch/mips/include/asm/compat.h:208:24: warning: 'rtdev' may be used uninitialized in this function [-Wmaybe-uninitialized] block/compat_ioctl.c:201:18: warning: 'udata' may be used uninitialized in this function [-Wmaybe-uninitialized] arch/mips/include/asm/uaccess.h:452:2: warning: 'n' may be used uninitialized in this function [-Wmaybe-uninitialized] arch/mips/include/asm/uaccess.h:452:2: warning: 'length' may be used uninitialized in this function [-Wmaybe-uninitialized] arch/mips/include/asm/compat.h:208:24: warning: 'palp' may be used uninitialized in this function [-Wmaybe-uninitialized] arch/mips/include/asm/uaccess.h:452:2: warning: 'size' may be used uninitialized in this function [-Wmaybe-uninitialized] arch/mips/include/asm/compat.h:208:24: warning: 'fp' may be used uninitialized in this function [-Wmaybe-uninitialized] -------------------------------------------------------------------------------- sead3_defconfig (mips) — FAIL, 224 errors, 4 warnings, 0 section mismatches Errors: arch/mips/kernel/r4k_fpu.S:48: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f1,272+8($4)' arch/mips/kernel/r4k_fpu.S:49: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f3,272+24($4)' arch/mips/kernel/r4k_fpu.S:50: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f5,272+40($4)' arch/mips/kernel/r4k_fpu.S:51: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f7,272+56($4)' arch/mips/kernel/r4k_fpu.S:52: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f9,272+72($4)' arch/mips/kernel/r4k_fpu.S:53: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f11,272+88($4)' arch/mips/kernel/r4k_fpu.S:54: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f13,272+104($4)' arch/mips/kernel/r4k_fpu.S:55: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f15,272+120($4)' arch/mips/kernel/r4k_fpu.S:56: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f17,272+136($4)' arch/mips/kernel/r4k_fpu.S:57: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f19,272+152($4)' arch/mips/kernel/r4k_fpu.S:58: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f21,272+168($4)' arch/mips/kernel/r4k_fpu.S:59: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f23,272+184($4)' arch/mips/kernel/r4k_fpu.S:60: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f25,272+200($4)' arch/mips/kernel/r4k_fpu.S:61: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f27,272+216($4)' arch/mips/kernel/r4k_fpu.S:62: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f29,272+232($4)' arch/mips/kernel/r4k_fpu.S:63: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f31,272+248($4)' arch/mips/kernel/r4k_fpu.S:68: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f0,272+0($4)' arch/mips/kernel/r4k_fpu.S:69: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f2,272+16($4)' arch/mips/kernel/r4k_fpu.S:70: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f4,272+32($4)' arch/mips/kernel/r4k_fpu.S:71: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f6,272+48($4)' arch/mips/kernel/r4k_fpu.S:72: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f8,272+64($4)' arch/mips/kernel/r4k_fpu.S:73: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f10,272+80($4)' arch/mips/kernel/r4k_fpu.S:74: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f12,272+96($4)' arch/mips/kernel/r4k_fpu.S:75: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f14,272+112($4)' arch/mips/kernel/r4k_fpu.S:76: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f16,272+128($4)' arch/mips/kernel/r4k_fpu.S:77: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f18,272+144($4)' arch/mips/kernel/r4k_fpu.S:78: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f20,272+160($4)' arch/mips/kernel/r4k_fpu.S:79: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f22,272+176($4)' arch/mips/kernel/r4k_fpu.S:80: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f24,272+192($4)' arch/mips/kernel/r4k_fpu.S:81: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f26,272+208($4)' arch/mips/kernel/r4k_fpu.S:82: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f28,272+224($4)' arch/mips/kernel/r4k_fpu.S:83: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f30,272+240($4)' arch/mips/kernel/r4k_fpu.S:160: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f1,272+8($4)' arch/mips/kernel/r4k_fpu.S:161: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f3,272+24($4)' arch/mips/kernel/r4k_fpu.S:162: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f5,272+40($4)' arch/mips/kernel/r4k_fpu.S:163: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f7,272+56($4)' arch/mips/kernel/r4k_fpu.S:164: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f9,272+72($4)' arch/mips/kernel/r4k_fpu.S:165: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f11,272+88($4)' arch/mips/kernel/r4k_fpu.S:166: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f13,272+104($4)' arch/mips/kernel/r4k_fpu.S:167: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f15,272+120($4)' arch/mips/kernel/r4k_fpu.S:168: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f17,272+136($4)' arch/mips/kernel/r4k_fpu.S:169: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f19,272+152($4)' arch/mips/kernel/r4k_fpu.S:170: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f21,272+168($4)' arch/mips/kernel/r4k_fpu.S:171: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f23,272+184($4)' arch/mips/kernel/r4k_fpu.S:172: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f25,272+200($4)' arch/mips/kernel/r4k_fpu.S:173: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f27,272+216($4)' arch/mips/kernel/r4k_fpu.S:174: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f29,272+232($4)' arch/mips/kernel/r4k_fpu.S:175: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f31,272+248($4)' arch/mips/kernel/r4k_fpu.S:178: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f0,272+0($4)' arch/mips/kernel/r4k_fpu.S:179: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f2,272+16($4)' arch/mips/kernel/r4k_fpu.S:180: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f4,272+32($4)' arch/mips/kernel/r4k_fpu.S:181: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f6,272+48($4)' arch/mips/kernel/r4k_fpu.S:182: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f8,272+64($4)' arch/mips/kernel/r4k_fpu.S:183: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f10,272+80($4)' arch/mips/kernel/r4k_fpu.S:184: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f12,272+96($4)' arch/mips/kernel/r4k_fpu.S:185: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f14,272+112($4)' arch/mips/kernel/r4k_fpu.S:186: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f16,272+128($4)' arch/mips/kernel/r4k_fpu.S:187: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f18,272+144($4)' arch/mips/kernel/r4k_fpu.S:188: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f20,272+160($4)' arch/mips/kernel/r4k_fpu.S:189: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f22,272+176($4)' arch/mips/kernel/r4k_fpu.S:190: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f24,272+192($4)' arch/mips/kernel/r4k_fpu.S:191: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f26,272+208($4)' arch/mips/kernel/r4k_fpu.S:192: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f28,272+224($4)' arch/mips/kernel/r4k_fpu.S:193: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f30,272+240($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f1,680($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f3,712($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f5,744($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f7,776($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f9,808($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f11,840($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f13,872($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f15,904($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f17,936($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f19,968($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f21,1000($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f23,1032($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f25,1064($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f27,1096($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f29,1128($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f31,1160($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f0,664($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f2,696($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f4,728($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f6,760($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f8,792($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f10,824($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f12,856($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f14,888($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f16,920($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f18,952($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f20,984($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f22,1016($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f24,1048($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f26,1080($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f28,1112($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f30,1144($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f1,680($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f3,712($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f5,744($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f7,776($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f9,808($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f11,840($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f13,872($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f15,904($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f17,936($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f19,968($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f21,1000($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f23,1032($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f25,1064($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f27,1096($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f29,1128($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips64r2 (mips64r2) `sdc1 $f31,1160($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f0,664($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f2,696($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f4,728($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f6,760($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f8,792($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f10,824($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f12,856($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f14,888($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f16,920($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f18,952($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f20,984($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f22,1016($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f24,1048($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f26,1080($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f28,1112($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: mips32r2 (mips32r2) `sdc1 $f30,1144($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f1,680($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f3,712($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f5,744($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f7,776($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f9,808($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f11,840($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f13,872($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f15,904($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f17,936($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f19,968($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f21,1000($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f23,1032($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f25,1064($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f27,1096($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f29,1128($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f31,1160($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ldc1 $f0,664($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ldc1 $f2,696($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ldc1 $f4,728($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ldc1 $f6,760($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ldc1 $f8,792($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ldc1 $f10,824($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ldc1 $f12,856($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ldc1 $f14,888($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ldc1 $f16,920($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ldc1 $f18,952($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ldc1 $f20,984($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ldc1 $f22,1016($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ldc1 $f24,1048($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ldc1 $f26,1080($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ldc1 $f28,1112($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ldc1 $f30,1144($4)' arch/mips/kernel/r4k_switch.S:193: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f0' arch/mips/kernel/r4k_switch.S:194: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f1' arch/mips/kernel/r4k_switch.S:195: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f2' arch/mips/kernel/r4k_switch.S:196: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f3' arch/mips/kernel/r4k_switch.S:197: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f4' arch/mips/kernel/r4k_switch.S:198: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f5' arch/mips/kernel/r4k_switch.S:199: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f6' arch/mips/kernel/r4k_switch.S:200: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f7' arch/mips/kernel/r4k_switch.S:201: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f8' arch/mips/kernel/r4k_switch.S:202: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f9' arch/mips/kernel/r4k_switch.S:203: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f10' arch/mips/kernel/r4k_switch.S:204: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f11' arch/mips/kernel/r4k_switch.S:205: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f12' arch/mips/kernel/r4k_switch.S:206: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f13' arch/mips/kernel/r4k_switch.S:207: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f14' arch/mips/kernel/r4k_switch.S:208: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f15' arch/mips/kernel/r4k_switch.S:209: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f16' arch/mips/kernel/r4k_switch.S:210: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f17' arch/mips/kernel/r4k_switch.S:211: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f18' arch/mips/kernel/r4k_switch.S:212: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f19' arch/mips/kernel/r4k_switch.S:213: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f20' arch/mips/kernel/r4k_switch.S:214: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f21' arch/mips/kernel/r4k_switch.S:215: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f22' arch/mips/kernel/r4k_switch.S:216: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f23' arch/mips/kernel/r4k_switch.S:217: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f24' arch/mips/kernel/r4k_switch.S:218: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f25' arch/mips/kernel/r4k_switch.S:219: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f26' arch/mips/kernel/r4k_switch.S:220: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f27' arch/mips/kernel/r4k_switch.S:221: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f28' arch/mips/kernel/r4k_switch.S:222: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f29' arch/mips/kernel/r4k_switch.S:223: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f30' arch/mips/kernel/r4k_switch.S:224: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f31' arch/mips/kernel/r4k_switch.S:232: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f0' arch/mips/kernel/r4k_switch.S:233: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f1' arch/mips/kernel/r4k_switch.S:234: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f2' arch/mips/kernel/r4k_switch.S:235: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f3' arch/mips/kernel/r4k_switch.S:236: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f4' arch/mips/kernel/r4k_switch.S:237: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f5' arch/mips/kernel/r4k_switch.S:238: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f6' arch/mips/kernel/r4k_switch.S:239: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f7' arch/mips/kernel/r4k_switch.S:240: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f8' arch/mips/kernel/r4k_switch.S:241: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f9' arch/mips/kernel/r4k_switch.S:242: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f10' arch/mips/kernel/r4k_switch.S:243: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f11' arch/mips/kernel/r4k_switch.S:244: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f12' arch/mips/kernel/r4k_switch.S:245: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f13' arch/mips/kernel/r4k_switch.S:246: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f14' arch/mips/kernel/r4k_switch.S:247: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f15' arch/mips/kernel/r4k_switch.S:248: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f16' arch/mips/kernel/r4k_switch.S:249: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f17' arch/mips/kernel/r4k_switch.S:250: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f18' arch/mips/kernel/r4k_switch.S:251: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f19' arch/mips/kernel/r4k_switch.S:252: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f20' arch/mips/kernel/r4k_switch.S:253: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f21' arch/mips/kernel/r4k_switch.S:254: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f22' arch/mips/kernel/r4k_switch.S:255: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f23' arch/mips/kernel/r4k_switch.S:256: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f24' arch/mips/kernel/r4k_switch.S:257: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f25' arch/mips/kernel/r4k_switch.S:258: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f26' arch/mips/kernel/r4k_switch.S:259: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f27' arch/mips/kernel/r4k_switch.S:260: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f28' arch/mips/kernel/r4k_switch.S:261: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f29' arch/mips/kernel/r4k_switch.S:262: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f30' arch/mips/kernel/r4k_switch.S:263: Error: opcode not supported on this processor: mips64r2 (mips64r2) `mthc1 $9,$f31' Warnings: mm/page_alloc.c:5328:34: warning: array subscript is below array bounds [-Warray-bounds] fs/namespace.c:2787:6: warning: 'kernel_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] fs/namespace.c:2787:6: warning: 'kernel_type' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/mtd/mtd_blkdevs.c:100:2: warning: switch condition has boolean value [-Wswitch-bool] -------------------------------------------------------------------------------- spear6xx_defconfig (arm) — PASS, 0 errors, 3 warnings, 0 section mismatches Warnings: fs/namespace.c:2787:6: warning: 'kernel_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] fs/namespace.c:2787:6: warning: 'kernel_type' may be used uninitialized in this function [-Wmaybe-uninitialized] include/linux/blkdev.h:623:26: warning: switch condition has boolean value [-Wswitch-bool] -------------------------------------------------------------------------------- tb0219_defconfig (mips) — FAIL, 96 errors, 3 warnings, 0 section mismatches Errors: arch/mips/kernel/r4k_fpu.S:68: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f0,272+0($4)' arch/mips/kernel/r4k_fpu.S:69: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f2,272+16($4)' arch/mips/kernel/r4k_fpu.S:70: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f4,272+32($4)' arch/mips/kernel/r4k_fpu.S:71: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f6,272+48($4)' arch/mips/kernel/r4k_fpu.S:72: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f8,272+64($4)' arch/mips/kernel/r4k_fpu.S:73: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f10,272+80($4)' arch/mips/kernel/r4k_fpu.S:74: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f12,272+96($4)' arch/mips/kernel/r4k_fpu.S:75: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f14,272+112($4)' arch/mips/kernel/r4k_fpu.S:76: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f16,272+128($4)' arch/mips/kernel/r4k_fpu.S:77: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f18,272+144($4)' arch/mips/kernel/r4k_fpu.S:78: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f20,272+160($4)' arch/mips/kernel/r4k_fpu.S:79: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f22,272+176($4)' arch/mips/kernel/r4k_fpu.S:80: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f24,272+192($4)' arch/mips/kernel/r4k_fpu.S:81: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f26,272+208($4)' arch/mips/kernel/r4k_fpu.S:82: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f28,272+224($4)' arch/mips/kernel/r4k_fpu.S:83: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f30,272+240($4)' arch/mips/kernel/r4k_fpu.S:178: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f0,272+0($4)' arch/mips/kernel/r4k_fpu.S:179: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f2,272+16($4)' arch/mips/kernel/r4k_fpu.S:180: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f4,272+32($4)' arch/mips/kernel/r4k_fpu.S:181: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f6,272+48($4)' arch/mips/kernel/r4k_fpu.S:182: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f8,272+64($4)' arch/mips/kernel/r4k_fpu.S:183: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f10,272+80($4)' arch/mips/kernel/r4k_fpu.S:184: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f12,272+96($4)' arch/mips/kernel/r4k_fpu.S:185: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f14,272+112($4)' arch/mips/kernel/r4k_fpu.S:186: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f16,272+128($4)' arch/mips/kernel/r4k_fpu.S:187: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f18,272+144($4)' arch/mips/kernel/r4k_fpu.S:188: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f20,272+160($4)' arch/mips/kernel/r4k_fpu.S:189: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f22,272+176($4)' arch/mips/kernel/r4k_fpu.S:190: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f24,272+192($4)' arch/mips/kernel/r4k_fpu.S:191: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f26,272+208($4)' arch/mips/kernel/r4k_fpu.S:192: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f28,272+224($4)' arch/mips/kernel/r4k_fpu.S:193: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f30,272+240($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f0,664($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f2,680($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f4,696($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f6,712($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f8,728($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f10,744($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f12,760($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f14,776($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f16,792($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f18,808($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f20,824($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f22,840($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f24,856($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f26,872($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f28,888($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f30,904($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f0,664($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f2,680($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f4,696($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f6,712($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f8,728($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f10,744($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f12,760($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f14,776($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f16,792($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f18,808($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f20,824($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f22,840($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f24,856($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f26,872($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f28,888($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f30,904($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f0,664($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f2,680($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f4,696($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f6,712($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f8,728($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f10,744($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f12,760($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f14,776($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f16,792($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f18,808($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f20,824($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f22,840($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f24,856($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f26,872($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f28,888($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f30,904($4)' arch/mips/kernel/r4k_switch.S:268: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f0' arch/mips/kernel/r4k_switch.S:269: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f2' arch/mips/kernel/r4k_switch.S:270: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f4' arch/mips/kernel/r4k_switch.S:271: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f6' arch/mips/kernel/r4k_switch.S:272: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f8' arch/mips/kernel/r4k_switch.S:273: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f10' arch/mips/kernel/r4k_switch.S:274: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f12' arch/mips/kernel/r4k_switch.S:275: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f14' arch/mips/kernel/r4k_switch.S:276: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f16' arch/mips/kernel/r4k_switch.S:277: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f18' arch/mips/kernel/r4k_switch.S:278: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f20' arch/mips/kernel/r4k_switch.S:279: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f22' arch/mips/kernel/r4k_switch.S:280: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f24' arch/mips/kernel/r4k_switch.S:281: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f26' arch/mips/kernel/r4k_switch.S:282: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f28' arch/mips/kernel/r4k_switch.S:283: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f30' Warnings: mm/page_alloc.c:5328:34: warning: array subscript is below array bounds [-Warray-bounds] fs/namespace.c:2787:6: warning: 'kernel_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] fs/namespace.c:2787:6: warning: 'kernel_type' may be used uninitialized in this function [-Wmaybe-uninitialized] -------------------------------------------------------------------------------- tb0226_defconfig (mips) — FAIL, 96 errors, 4 warnings, 0 section mismatches Errors: arch/mips/kernel/r4k_fpu.S:68: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f0,272+0($4)' arch/mips/kernel/r4k_fpu.S:69: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f2,272+16($4)' arch/mips/kernel/r4k_fpu.S:70: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f4,272+32($4)' arch/mips/kernel/r4k_fpu.S:71: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f6,272+48($4)' arch/mips/kernel/r4k_fpu.S:72: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f8,272+64($4)' arch/mips/kernel/r4k_fpu.S:73: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f10,272+80($4)' arch/mips/kernel/r4k_fpu.S:74: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f12,272+96($4)' arch/mips/kernel/r4k_fpu.S:75: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f14,272+112($4)' arch/mips/kernel/r4k_fpu.S:76: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f16,272+128($4)' arch/mips/kernel/r4k_fpu.S:77: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f18,272+144($4)' arch/mips/kernel/r4k_fpu.S:78: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f20,272+160($4)' arch/mips/kernel/r4k_fpu.S:79: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f22,272+176($4)' arch/mips/kernel/r4k_fpu.S:80: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f24,272+192($4)' arch/mips/kernel/r4k_fpu.S:81: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f26,272+208($4)' arch/mips/kernel/r4k_fpu.S:82: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f28,272+224($4)' arch/mips/kernel/r4k_fpu.S:83: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f30,272+240($4)' arch/mips/kernel/r4k_fpu.S:178: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f0,272+0($4)' arch/mips/kernel/r4k_fpu.S:179: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f2,272+16($4)' arch/mips/kernel/r4k_fpu.S:180: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f4,272+32($4)' arch/mips/kernel/r4k_fpu.S:181: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f6,272+48($4)' arch/mips/kernel/r4k_fpu.S:182: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f8,272+64($4)' arch/mips/kernel/r4k_fpu.S:183: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f10,272+80($4)' arch/mips/kernel/r4k_fpu.S:184: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f12,272+96($4)' arch/mips/kernel/r4k_fpu.S:185: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f14,272+112($4)' arch/mips/kernel/r4k_fpu.S:186: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f16,272+128($4)' arch/mips/kernel/r4k_fpu.S:187: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f18,272+144($4)' arch/mips/kernel/r4k_fpu.S:188: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f20,272+160($4)' arch/mips/kernel/r4k_fpu.S:189: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f22,272+176($4)' arch/mips/kernel/r4k_fpu.S:190: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f24,272+192($4)' arch/mips/kernel/r4k_fpu.S:191: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f26,272+208($4)' arch/mips/kernel/r4k_fpu.S:192: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f28,272+224($4)' arch/mips/kernel/r4k_fpu.S:193: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f30,272+240($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f0,664($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f2,680($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f4,696($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f6,712($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f8,728($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f10,744($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f12,760($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f14,776($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f16,792($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f18,808($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f20,824($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f22,840($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f24,856($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f26,872($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f28,888($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f30,904($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f0,664($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f2,680($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f4,696($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f6,712($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f8,728($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f10,744($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f12,760($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f14,776($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f16,792($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f18,808($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f20,824($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f22,840($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f24,856($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f26,872($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f28,888($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f30,904($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f0,664($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f2,680($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f4,696($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f6,712($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f8,728($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f10,744($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f12,760($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f14,776($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f16,792($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f18,808($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f20,824($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f22,840($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f24,856($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f26,872($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f28,888($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f30,904($4)' arch/mips/kernel/r4k_switch.S:268: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f0' arch/mips/kernel/r4k_switch.S:269: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f2' arch/mips/kernel/r4k_switch.S:270: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f4' arch/mips/kernel/r4k_switch.S:271: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f6' arch/mips/kernel/r4k_switch.S:272: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f8' arch/mips/kernel/r4k_switch.S:273: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f10' arch/mips/kernel/r4k_switch.S:274: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f12' arch/mips/kernel/r4k_switch.S:275: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f14' arch/mips/kernel/r4k_switch.S:276: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f16' arch/mips/kernel/r4k_switch.S:277: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f18' arch/mips/kernel/r4k_switch.S:278: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f20' arch/mips/kernel/r4k_switch.S:279: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f22' arch/mips/kernel/r4k_switch.S:280: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f24' arch/mips/kernel/r4k_switch.S:281: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f26' arch/mips/kernel/r4k_switch.S:282: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f28' arch/mips/kernel/r4k_switch.S:283: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f30' Warnings: mm/page_alloc.c:5328:34: warning: array subscript is below array bounds [-Warray-bounds] fs/namespace.c:2787:6: warning: 'kernel_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] fs/namespace.c:2787:6: warning: 'kernel_type' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/scsi/scsi_tgt_if.c:289:36: warning: passing argument 1 of 'virt_to_phys' makes pointer from integer without a cast [-Wint-conversion] -------------------------------------------------------------------------------- tb0287_defconfig (mips) — FAIL, 96 errors, 4 warnings, 0 section mismatches Errors: arch/mips/kernel/r4k_fpu.S:68: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f0,272+0($4)' arch/mips/kernel/r4k_fpu.S:69: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f2,272+16($4)' arch/mips/kernel/r4k_fpu.S:70: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f4,272+32($4)' arch/mips/kernel/r4k_fpu.S:71: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f6,272+48($4)' arch/mips/kernel/r4k_fpu.S:72: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f8,272+64($4)' arch/mips/kernel/r4k_fpu.S:73: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f10,272+80($4)' arch/mips/kernel/r4k_fpu.S:74: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f12,272+96($4)' arch/mips/kernel/r4k_fpu.S:75: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f14,272+112($4)' arch/mips/kernel/r4k_fpu.S:76: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f16,272+128($4)' arch/mips/kernel/r4k_fpu.S:77: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f18,272+144($4)' arch/mips/kernel/r4k_fpu.S:78: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f20,272+160($4)' arch/mips/kernel/r4k_fpu.S:79: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f22,272+176($4)' arch/mips/kernel/r4k_fpu.S:80: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f24,272+192($4)' arch/mips/kernel/r4k_fpu.S:81: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f26,272+208($4)' arch/mips/kernel/r4k_fpu.S:82: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f28,272+224($4)' arch/mips/kernel/r4k_fpu.S:83: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f30,272+240($4)' arch/mips/kernel/r4k_fpu.S:178: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f0,272+0($4)' arch/mips/kernel/r4k_fpu.S:179: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f2,272+16($4)' arch/mips/kernel/r4k_fpu.S:180: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f4,272+32($4)' arch/mips/kernel/r4k_fpu.S:181: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f6,272+48($4)' arch/mips/kernel/r4k_fpu.S:182: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f8,272+64($4)' arch/mips/kernel/r4k_fpu.S:183: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f10,272+80($4)' arch/mips/kernel/r4k_fpu.S:184: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f12,272+96($4)' arch/mips/kernel/r4k_fpu.S:185: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f14,272+112($4)' arch/mips/kernel/r4k_fpu.S:186: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f16,272+128($4)' arch/mips/kernel/r4k_fpu.S:187: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f18,272+144($4)' arch/mips/kernel/r4k_fpu.S:188: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f20,272+160($4)' arch/mips/kernel/r4k_fpu.S:189: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f22,272+176($4)' arch/mips/kernel/r4k_fpu.S:190: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f24,272+192($4)' arch/mips/kernel/r4k_fpu.S:191: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f26,272+208($4)' arch/mips/kernel/r4k_fpu.S:192: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f28,272+224($4)' arch/mips/kernel/r4k_fpu.S:193: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f30,272+240($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f0,664($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f2,680($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f4,696($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f6,712($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f8,728($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f10,744($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f12,760($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f14,776($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f16,792($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f18,808($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f20,824($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f22,840($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f24,856($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f26,872($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f28,888($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f30,904($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f0,664($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f2,680($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f4,696($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f6,712($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f8,728($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f10,744($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f12,760($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f14,776($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f16,792($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f18,808($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f20,824($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f22,840($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f24,856($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f26,872($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f28,888($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f30,904($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f0,664($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f2,680($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f4,696($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f6,712($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f8,728($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f10,744($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f12,760($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f14,776($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f16,792($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f18,808($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f20,824($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f22,840($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f24,856($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f26,872($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f28,888($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f30,904($4)' arch/mips/kernel/r4k_switch.S:268: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f0' arch/mips/kernel/r4k_switch.S:269: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f2' arch/mips/kernel/r4k_switch.S:270: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f4' arch/mips/kernel/r4k_switch.S:271: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f6' arch/mips/kernel/r4k_switch.S:272: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f8' arch/mips/kernel/r4k_switch.S:273: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f10' arch/mips/kernel/r4k_switch.S:274: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f12' arch/mips/kernel/r4k_switch.S:275: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f14' arch/mips/kernel/r4k_switch.S:276: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f16' arch/mips/kernel/r4k_switch.S:277: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f18' arch/mips/kernel/r4k_switch.S:278: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f20' arch/mips/kernel/r4k_switch.S:279: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f22' arch/mips/kernel/r4k_switch.S:280: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f24' arch/mips/kernel/r4k_switch.S:281: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f26' arch/mips/kernel/r4k_switch.S:282: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f28' arch/mips/kernel/r4k_switch.S:283: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f30' Warnings: mm/page_alloc.c:5328:34: warning: array subscript is below array bounds [-Warray-bounds] fs/namespace.c:2787:6: warning: 'kernel_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] fs/namespace.c:2787:6: warning: 'kernel_type' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/scsi/scsi_tgt_if.c:289:36: warning: passing argument 1 of 'virt_to_phys' makes pointer from integer without a cast [-Wint-conversion] -------------------------------------------------------------------------------- u300_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: fs/namespace.c:2787:6: warning: 'kernel_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] fs/namespace.c:2787:6: warning: 'kernel_type' may be used uninitialized in this function [-Wmaybe-uninitialized] -------------------------------------------------------------------------------- versatile_defconfig (arm) — PASS, 0 errors, 3 warnings, 0 section mismatches Warnings: fs/namespace.c:2787:6: warning: 'kernel_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] fs/namespace.c:2787:6: warning: 'kernel_type' may be used uninitialized in this function [-Wmaybe-uninitialized] include/linux/blkdev.h:623:26: warning: switch condition has boolean value [-Wswitch-bool] -------------------------------------------------------------------------------- versatile_defconfig+CONFIG_OF_UNITTEST=y (arm) — PASS, 0 errors, 3 warnings, 0 section mismatches Warnings: fs/namespace.c:2787:6: warning: 'kernel_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] fs/namespace.c:2787:6: warning: 'kernel_type' may be used uninitialized in this function [-Wmaybe-uninitialized] include/linux/blkdev.h:623:26: warning: switch condition has boolean value [-Wswitch-bool] -------------------------------------------------------------------------------- workpad_defconfig (mips) — FAIL, 96 errors, 4 warnings, 0 section mismatches Errors: arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f0,664($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f2,680($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f4,696($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f6,712($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f8,728($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f10,744($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f12,760($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f14,776($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f16,792($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f18,808($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f20,824($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f22,840($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f24,856($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f26,872($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f28,888($4)' arch/mips/kernel/r4k_switch.S:72: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f30,904($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f0,664($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f2,680($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f4,696($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f6,712($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f8,728($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f10,744($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f12,760($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f14,776($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f16,792($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f18,808($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f20,824($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f22,840($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f24,856($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f26,872($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f28,888($4)' arch/mips/kernel/r4k_switch.S:112: Error: opcode not supported on this processor: vr4100 (mips3) `sdc1 $f30,904($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f0,664($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f2,680($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f4,696($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f6,712($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f8,728($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f10,744($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f12,760($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f14,776($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f16,792($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f18,808($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f20,824($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f22,840($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f24,856($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f26,872($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f28,888($4)' arch/mips/kernel/r4k_switch.S:123: Error: opcode not supported on this processor: vr4100 (mips3) `ldc1 $f30,904($4)' arch/mips/kernel/r4k_switch.S:268: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f0' arch/mips/kernel/r4k_switch.S:269: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f2' arch/mips/kernel/r4k_switch.S:270: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f4' arch/mips/kernel/r4k_switch.S:271: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f6' arch/mips/kernel/r4k_switch.S:272: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f8' arch/mips/kernel/r4k_switch.S:273: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f10' arch/mips/kernel/r4k_switch.S:274: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f12' arch/mips/kernel/r4k_switch.S:275: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f14' arch/mips/kernel/r4k_switch.S:276: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f16' arch/mips/kernel/r4k_switch.S:277: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f18' arch/mips/kernel/r4k_switch.S:278: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f20' arch/mips/kernel/r4k_switch.S:279: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f22' arch/mips/kernel/r4k_switch.S:280: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f24' arch/mips/kernel/r4k_switch.S:281: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f26' arch/mips/kernel/r4k_switch.S:282: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f28' arch/mips/kernel/r4k_switch.S:283: Error: opcode not supported on this processor: mips3 (mips3) `dmtc1 $9,$f30' arch/mips/kernel/r4k_fpu.S:68: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f0,272+0($4)' arch/mips/kernel/r4k_fpu.S:69: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f2,272+16($4)' arch/mips/kernel/r4k_fpu.S:70: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f4,272+32($4)' arch/mips/kernel/r4k_fpu.S:71: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f6,272+48($4)' arch/mips/kernel/r4k_fpu.S:72: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f8,272+64($4)' arch/mips/kernel/r4k_fpu.S:73: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f10,272+80($4)' arch/mips/kernel/r4k_fpu.S:74: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f12,272+96($4)' arch/mips/kernel/r4k_fpu.S:75: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f14,272+112($4)' arch/mips/kernel/r4k_fpu.S:76: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f16,272+128($4)' arch/mips/kernel/r4k_fpu.S:77: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f18,272+144($4)' arch/mips/kernel/r4k_fpu.S:78: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f20,272+160($4)' arch/mips/kernel/r4k_fpu.S:79: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f22,272+176($4)' arch/mips/kernel/r4k_fpu.S:80: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f24,272+192($4)' arch/mips/kernel/r4k_fpu.S:81: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f26,272+208($4)' arch/mips/kernel/r4k_fpu.S:82: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f28,272+224($4)' arch/mips/kernel/r4k_fpu.S:83: Error: opcode not supported on this processor: mips3 (mips3) `sdc1 $f30,272+240($4)' arch/mips/kernel/r4k_fpu.S:178: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f0,272+0($4)' arch/mips/kernel/r4k_fpu.S:179: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f2,272+16($4)' arch/mips/kernel/r4k_fpu.S:180: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f4,272+32($4)' arch/mips/kernel/r4k_fpu.S:181: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f6,272+48($4)' arch/mips/kernel/r4k_fpu.S:182: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f8,272+64($4)' arch/mips/kernel/r4k_fpu.S:183: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f10,272+80($4)' arch/mips/kernel/r4k_fpu.S:184: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f12,272+96($4)' arch/mips/kernel/r4k_fpu.S:185: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f14,272+112($4)' arch/mips/kernel/r4k_fpu.S:186: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f16,272+128($4)' arch/mips/kernel/r4k_fpu.S:187: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f18,272+144($4)' arch/mips/kernel/r4k_fpu.S:188: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f20,272+160($4)' arch/mips/kernel/r4k_fpu.S:189: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f22,272+176($4)' arch/mips/kernel/r4k_fpu.S:190: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f24,272+192($4)' arch/mips/kernel/r4k_fpu.S:191: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f26,272+208($4)' arch/mips/kernel/r4k_fpu.S:192: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f28,272+224($4)' arch/mips/kernel/r4k_fpu.S:193: Error: opcode not supported on this processor: mips3 (mips3) `ldc1 $f30,272+240($4)' Warnings: mm/page_alloc.c:5328:34: warning: array subscript is below array bounds [-Warray-bounds] fs/namespace.c:2787:6: warning: 'kernel_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] fs/namespace.c:2787:6: warning: 'kernel_type' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/net/ethernet/amd/nmclan_cs.c:624:3: warning: 'pcmcia_request_exclusive_irq' is deprecated [-Wdeprecated-declarations] -------------------------------------------------------------------------------- x86_64_defconfig (x86) — PASS, 0 errors, 5 warnings, 0 section mismatches Warnings: fs/namespace.c:2787:8: warning: 'kernel_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] fs/namespace.c:2787:8: warning: 'kernel_type' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/hid/hid-input.c:1122:67: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] arch/x86/include/asm/pgtable_64.h:184:26: warning: suggest parentheses around assignment used as truth value [-Wparentheses] fs/nfs/nfs4proc.c:3005:10: warning: switch condition has boolean value [-Wswitch-bool] --- For more info write to <info(a)kernelci.org>

7 years, 9 months

mainline boot: 553 boots: 11 failed, 513 passed with 28 offline, 1 conflict (v4.11-rc2-235-gd528ae0d3dfe)

by kernelci.org bot

mainline boot: 553 boots: 11 failed, 513 passed with 28 offline, 1 conflict (v4.11-rc2-235-gd528ae0d3dfe) Full Boot Summary: https://kernelci.org/boot/all/job/mainline/kernel/v4.11-rc2-235-gd528ae0d3d… Full Build Summary: https://kernelci.org/build/mainline/kernel/v4.11-rc2-235-gd528ae0d3dfe/ Tree: mainline Branch: local/master Git Describe: v4.11-rc2-235-gd528ae0d3dfe Git Commit: d528ae0d3dfedea553812c957a6ed1e87feeed8a Git URL: http://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git Tested: 106 unique boards, 25 SoC families, 33 builds out of 208 Boot Regressions Detected: arm: multi_v7_defconfig: hisi-x5hd2-dkb: lab-cambridge: new failure (last pass: v4.11-rc2-24-gfb5fe0fd626c) hisi-x5hd2-dkb_rootfs:nfs: lab-cambridge: failing since 1 day (last pass: v4.11-rc2-24-gfb5fe0fd626c - first fail: v4.11-rc2-228-gd11507e19724) multi_v7_defconfig+CONFIG_EFI=y: hisi-x5hd2-dkb: lab-cambridge: failing since 1 day (last pass: v4.11-rc2-24-gfb5fe0fd626c - first fail: v4.11-rc2-228-gd11507e19724) multi_v7_defconfig+CONFIG_LKDTM=y: hisi-x5hd2-dkb: lab-cambridge: failing since 1 day (last pass: v4.11-rc1-335-g56b24d1bbcff - first fail: v4.11-rc2-228-gd11507e19724) multi_v7_defconfig+CONFIG_PROVE_LOCKING=y: exynos5422-odroidxu3: lab-collabora: failing since 3 days (last pass: v4.11-rc1-315-g106e4da60209 - first fail: v4.11-rc2-1-gce70df089143) hisi-x5hd2-dkb: lab-cambridge: failing since 1 day (last pass: v4.11-rc2-24-gfb5fe0fd626c - first fail: v4.11-rc2-228-gd11507e19724) multi_v7_defconfig+CONFIG_SMP=n: hisi-x5hd2-dkb: lab-cambridge: new failure (last pass: v4.11-rc2-1-gce70df089143) multi_v7_defconfig+CONFIG_THUMB2_KERNEL=y+CONFIG_ARM_MODULE_PLTS=y: hisi-x5hd2-dkb: lab-cambridge: new failure (last pass: v4.11-rc2-24-gfb5fe0fd626c) arm64: defconfig+CONFIG_RANDOMIZE_BASE=y: armada-3720-db: lab-free-electrons: failing since 61 days (last pass: v4.8-rc7-42-g7d1e04231461 - first fail: v4.10-rc3-205-gc79d47f14fba) Boot Failures Detected: arm64: defconfig+CONFIG_KASAN=y apm-mustang: 1 failed lab armada-3720-db: 1 failed lab defconfig+CONFIG_RANDOMIZE_BASE=y armada-3720-db: 1 failed lab arm: multi_v7_defconfig+CONFIG_SMP=n armada-388-gp: 1 failed lab hisi-x5hd2-dkb: 1 failed lab multi_v7_defconfig+CONFIG_PROVE_LOCKING=y hisi-x5hd2-dkb: 1 failed lab multi_v7_defconfig+CONFIG_THUMB2_KERNEL=y+CONFIG_ARM_MODULE_PLTS=y hisi-x5hd2-dkb: 1 failed lab multi_v7_defconfig hisi-x5hd2-dkb: 1 failed lab hisi-x5hd2-dkb_rootfs:nfs: 1 failed lab multi_v7_defconfig+CONFIG_EFI=y hisi-x5hd2-dkb: 1 failed lab multi_v7_defconfig+CONFIG_LKDTM=y hisi-x5hd2-dkb: 1 failed lab Offline Platforms: arm: multi_v7_defconfig+CONFIG_SMP=n: hip04-d01: 1 offline lab multi_v7_defconfig+CONFIG_PROVE_LOCKING=y: armada-xp-openblocks-ax3-4: 1 offline lab hip04-d01: 1 offline lab tegra30-beaver: 1 offline lab zynq-zc702: 1 offline lab multi_v7_defconfig+CONFIG_THUMB2_KERNEL=y+CONFIG_ARM_MODULE_PLTS=y: armada-xp-openblocks-ax3-4: 1 offline lab hip04-d01: 1 offline lab tegra30-beaver: 1 offline lab zynq-zc702: 1 offline lab multi_v7_defconfig: armada-xp-openblocks-ax3-4: 1 offline lab hip04-d01: 1 offline lab tegra30-beaver: 1 offline lab zynq-zc702: 1 offline lab multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y: armada-xp-openblocks-ax3-4: 1 offline lab multi_v7_defconfig+CONFIG_EFI=y: armada-xp-openblocks-ax3-4: 1 offline lab hip04-d01: 1 offline lab tegra30-beaver: 1 offline lab zynq-zc702: 1 offline lab multi_v7_defconfig+CONFIG_LKDTM=y: armada-xp-openblocks-ax3-4: 1 offline lab hip04-d01: 1 offline lab tegra30-beaver: 1 offline lab zynq-zc702: 1 offline lab multi_v7_defconfig+CONFIG_ARM_LPAE=y: armada-xp-openblocks-ax3-4: 1 offline lab hip04-d01: 1 offline lab mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y: armada-xp-openblocks-ax3-4: 1 offline lab tegra_defconfig: tegra30-beaver: 1 offline lab mvebu_v7_defconfig: armada-xp-openblocks-ax3-4: 1 offline lab multi_v7_defconfig+CONFIG_EFI=y+CONFIG_ARM_LPAE=y: hip04-d01: 1 offline lab Conflicting Boot Failure Detected: (These likely are not failures as other labs are reporting PASS. Needs review.) arm: multi_v7_defconfig+CONFIG_PROVE_LOCKING=y: exynos5422-odroidxu3: lab-baylibre-seattle: PASS lab-collabora: FAIL --- For more info write to <info(a)kernelci.org>

7 years, 9 months

mainline build: 4 warnings 0 failures (mainline/v4.11-rc2-235-gd528ae0)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: d528ae0 Merge branch 'akpm' (patches from Andrew) Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v4.11-rc2-235-gd528ae0/ Runtime: 86m 43s Passed: 125 Failed: 0 Warnings: 4 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/media/platform/coda/imx-vdoa.c:333:571: warning: passing argument 1 of 'platform_driver_unregister' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] 1 drivers/media/platform/coda/imx-vdoa.c:333:625: warning: passing argument 1 of 'platform_driver_unregister' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] 2 drivers/media/platform/coda/imx-vdoa.c:333:181: warning: passing argument 1 of '__platform_driver_register' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] New syscalls: arm64 statx arm statx powerpc statx No section mismatches

7 years, 9 months

stable boot: 38 boots: 0 failed, 21 passed with 17 offline (v3.12.72)

by kernelci.org bot

stable boot: 38 boots: 0 failed, 21 passed with 17 offline (v3.12.72) Full Boot Summary: https://kernelci.org/boot/all/job/stable/kernel/v3.12.72/ Full Build Summary: https://kernelci.org/build/stable/kernel/v3.12.72/ Tree: stable Branch: local/linux-3.12.y Git Describe: v3.12.72 Git Commit: 7a7a4d0abbf2630eabbcb833ee54b716ec33568b Git URL: http://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git Tested: 25 unique boards, 10 SoC families, 6 builds out of 25 Offline Platforms: arm: multi_v7_defconfig+CONFIG_SMP=n: am335x-boneblack: 2 offline labs imx6q-sabrelite: 1 offline lab omap4-panda: 1 offline lab vexpress-v2p-ca15-tc1: 1 offline lab vexpress-v2p-ca15_a7: 1 offline lab vexpress-v2p-ca9: 1 offline lab multi_v7_defconfig+CONFIG_EFI=y: am335x-boneblack: 2 offline labs armada-xp-openblocks-ax3-4: 1 offline lab imx6q-sabrelite: 1 offline lab omap4-panda: 1 offline lab tegra30-beaver: 1 offline lab vexpress-v2p-ca15-tc1: 1 offline lab vexpress-v2p-ca15_a7: 1 offline lab vexpress-v2p-ca9: 1 offline lab zynq-zc702: 1 offline lab --- For more info write to <info(a)kernelci.org>

7 years, 9 months

v3.12.71-rt96 build: 1 failures 186 warnings (v3.12.71-rt96)

by Build bot for Mark Brown

Tree/Branch: v3.12.71-rt96 Git describe: v3.12.71-rt96 Commit: 94721a2e2b Linux 3.12.71-rt96 Build Time: 46 min 6 sec Passed: 7 / 8 ( 87.50 %) Failed: 1 / 8 ( 12.50 %) Errors: 9 Warnings: 186 Section Mismatches: 0 Failed defconfigs: arm64-allmodconfig Errors: arm64-allmodconfig /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl330_ids_device_table' isn't known /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__nmk_i2c_ids_device_table' isn't known /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__amba_kmi_idtable_device_table' isn't known /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__mmci_ids_device_table' isn't known /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl030_ids_device_table' isn't known /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl031_ids_device_table' isn't known /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl022_ids_device_table' isn't known /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl010_ids_device_table' isn't known /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl011_ids_device_table' isn't known ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): 5 warnings 0 mismatches : arm64-allnoconfig 152 warnings 0 mismatches : arm64-allmodconfig 2 warnings 0 mismatches : arm-multi_v7_defconfig 2 warnings 0 mismatches : x86_64-defconfig 38 warnings 0 mismatches : arm-allmodconfig 1 warnings 0 mismatches : arm-allnoconfig 1 warnings 0 mismatches : x86_64-allnoconfig 14 warnings 0 mismatches : arm64-defconfig ------------------------------------------------------------------------------- Errors summary: 9 1 /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl330_ids_device_table' isn't known 1 /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl031_ids_device_table' isn't known 1 /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl030_ids_device_table' isn't known 1 /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl022_ids_device_table' isn't known 1 /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl011_ids_device_table' isn't known 1 /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl010_ids_device_table' isn't known 1 /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__nmk_i2c_ids_device_table' isn't known 1 /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__mmci_ids_device_table' isn't known 1 /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__amba_kmi_idtable_device_table' isn't known Warnings Summary: 186 8 /home/broonie/build/linux-stable-rt/mm/slub.c:1310:6: warning: unused variable 'idx' [-Wunused-variable] 3 /home/broonie/build/linux-stable-rt/mm/swap.c:50:30: warning: 'swapvec_lock' defined but not used [-Wunused-const-variable=] 3 /home/broonie/build/linux-stable-rt/mm/swap.c:49:30: warning: 'rotate_lock' defined but not used [-Wunused-const-variable=] 3 /home/broonie/build/linux-stable-rt/lib/radix-tree.c:97:30: warning: 'radix_tree_preloads_lock' defined but not used [-Wunused-const-variable=] 3 /home/broonie/build/linux-stable-rt/kernel/workqueue.c:333:30: warning: 'pendingb_lock' defined but not used [-Wunused-const-variable=] 2 /home/broonie/build/linux-stable-rt/net/ipv4/tcp_ipv4.c:576:30: warning: 'tcp_sk_lock' defined but not used [-Wunused-const-variable=] 2 /home/broonie/build/linux-stable-rt/net/ipv4/ping.c:1146:36: warning: 'ping_v4_seq_ops' defined but not used [-Wunused-const-variable=] 2 /home/broonie/build/linux-stable-rt/net/ipv4/icmp.c:208:30: warning: 'icmp_sk_lock' defined but not used [-Wunused-const-variable=] 2 /home/broonie/build/linux-stable-rt/net/core/skbuff.c:358:30: warning: 'netdev_alloc_lock' defined but not used [-Wunused-const-variable=] 2 /home/broonie/build/linux-stable-rt/net/core/net-sysfs.c:30:19: warning: 'fmt_long_hex' defined but not used [-Wunused-const-variable=] 2 /home/broonie/build/linux-stable-rt/kernel/cpu.c:468:13: warning: 'cpu_notify_nofail' defined but not used [-Wunused-function] 2 /home/broonie/build/linux-stable-rt/kernel/cgroup.c:1276:5: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses] 2 /home/broonie/build/linux-stable-rt/include/linux/compiler-gcc.h:136:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] 2 /home/broonie/build/linux-stable-rt/fs/nfs/nfs4proc.c:2925:10: warning: switch condition has boolean value [-Wswitch-bool] 2 /home/broonie/build/linux-stable-rt/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:941:59: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] 2 /home/broonie/build/linux-stable-rt/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:4052:42: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] 2 /home/broonie/build/linux-stable-rt/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:4043:54: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] 2 /home/broonie/build/linux-stable-rt/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:2629:62: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] 2 /home/broonie/build/linux-stable-rt/drivers/net/ethernet/smsc/smc91x.c:1899:7: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable-rt/sound/soc/codecs/wm8991.c:526:38: warning: 'wm8991_dapm_rxvoice_controls' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/sound/soc/codecs/wm8991.c:126:27: warning: 'out_omix_tlv' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/sound/soc/codecs/wm8991.c:106:27: warning: 'rec_mix_tlv' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/sound/soc/codecs/wm8990.c:527:38: warning: 'wm8990_dapm_rxvoice_controls' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/sound/soc/codecs/wm8990.c:126:35: warning: 'out_omix_tlv' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/sound/soc/codecs/wm8990.c:118:35: warning: 'rec_mix_tlv' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/sound/soc/codecs/wm8988.c:273:30: warning: 'wm8988_rline_enum' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/sound/soc/codecs/wm8974.c:202:38: warning: 'wm8974_mic_boost_controls' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/sound/soc/codecs/wm8974.c:198:38: warning: 'wm8974_aux_boost_controls' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/sound/soc/codecs/wm8900.c:451:38: warning: 'wm8900_dapm_routput2_control' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/sound/soc/codecs/wm8900.c:448:38: warning: 'wm8900_dapm_loutput2_control' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/sound/soc/codecs/wm8737.c:116:30: warning: 'high_3d' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/sound/soc/codecs/tlv320aic23.c:56:30: warning: 'tlv320aic23_rec_src' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/sound/soc/codecs/ml26124.c:71:35: warning: 'ngth' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/sound/soc/codecs/max98090.c:876:30: warning: 'max98090_pa2en_enum' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/sound/soc/codecs/max98090.c:872:30: warning: 'max98090_pa1en_enum' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/sound/soc/codecs/max98090.c:389:35: warning: 'max98090_alc_tlv' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/sound/soc/codecs/max98090.c:387:35: warning: 'max98090_sidetone_tlv' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/sound/soc/codecs/cs42l73.c:383:38: warning: 'xsp_output_mux' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/sound/soc/codecs/cs42l73.c:380:38: warning: 'vsp_output_mux' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/sound/pci/ac97/ac97_codec.c:613:38: warning: 'snd_ac97_controls_master_mono' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/net/wireless/nl80211.c:393:1: warning: 'nl80211_wowlan_tcp_policy' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/net/wireless/nl80211.c:380:1: warning: 'nl80211_wowlan_policy' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/net/sunrpc/xprtrdma/verbs.c:1774:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable-rt/net/sched/sch_choke.c:589:37: warning: 'choke_class_ops' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/net/netfilter/xt_recent.c:103:37: warning: 'recent_old_fops' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/net/mac80211/debugfs_sta.c:35:37: warning: 'sta_aid_ops' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/net/mac80211/debugfs.c:70:23: warning: 'rate_ctrl_alg_ops' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/net/ipv4/arp.c:152:31: warning: 'arp_broken_ops' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/net/dcb/dcbnl.c:183:32: warning: 'dcbnl_ieee_app' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/kernel/modsign_pubkey.c:28:31: warning: 'annoy_ccache' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/fs/ncpfs/dir.c:860:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 1 /home/broonie/build/linux-stable-rt/fs/fscache/object.c:34:25: warning: 'fscache_osm_CREATE_OBJECT' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/fs/cifs/netmisc.c:133:40: warning: 'mapping_table_ERRHRD' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/fs/cifs/cifsacl.c:43:30: warning: 'sid_user' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/fs/afs/cmservice.c:78:35: warning: 'afs_SRXCBProbeUuid' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/video/xen-fbfront.c:588:57: warning: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'long long unsigned int' [-Wformat=] 1 /home/broonie/build/linux-stable-rt/drivers/video/omap2/displays-new/panel-sony-acx565akm.c:608:25: warning: unused variable 'ddata' [-Wunused-variable] 1 /home/broonie/build/linux-stable-rt/drivers/video/backlight/s6e63m0.c:331:29: warning: 'seq_elvss_off' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/video/backlight/s6e63m0.c:317:29: warning: 'seq_acl_off' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/video/backlight/lms501kf03.c:96:28: warning: 'seq_up_dn' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/video/backlight/lms501kf03.c:100:28: warning: 'seq_sleep_in' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:92:29: warning: 'seq_swreset' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:414:29: warning: 'seq_el_on' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:402:29: warning: 'seq_els_en' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:390:29: warning: 'seq_gls_en' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:378:29: warning: 'seq_sd_amp_en' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:366:29: warning: 'seq_gam_amp_en' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:356:29: warning: 'seq_vbl_amp_en' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:346:29: warning: 'seq_vbh_amp_en' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:334:29: warning: 'seq_vint_amp_en' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:324:29: warning: 'seq_vmos_amp_en' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:314:29: warning: 'seq_vgl_amp_en' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:304:29: warning: 'seq_vgh_amp_en' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:294:29: warning: 'seq_vreg1_amp_en' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:284:29: warning: 'seq_vl3_en' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:274:29: warning: 'seq_vci1_2nd_en' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:264:29: warning: 'seq_vl2_en' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:254:29: warning: 'seq_vl1_en' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:244:29: warning: 'seq_vci1_1st_en' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:212:29: warning: 'seq_pwr_ctrl' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:187:29: warning: 'seq_apon' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/video/aty/radeon_pm.c:1718:13: warning: 'radeon_reinitialize_M10' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable-rt/drivers/usb/storage/realtek_cr.c:699:13: warning: 'fw5895_init' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable-rt/drivers/usb/storage/realtek_cr.c:629:12: warning: 'config_autodelink_before_power_down' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable-rt/drivers/usb/serial/garmin_gps.c:205:28: warning: 'PRIVATE_REQ' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/usb/serial/garmin_gps.c:199:28: warning: 'GARMIN_STOP_PVT_REQ' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/usb/serial/garmin_gps.c:197:28: warning: 'GARMIN_START_PVT_REQ' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/usb/serial/garmin_gps.c:195:28: warning: 'GARMIN_APP_LAYER_REPLY' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/usb/gadget/nokia.c:45:19: warning: 'product_nokia' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/usb/gadget/mv_udc_core.c:62:19: warning: 'driver_desc' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/usb/gadget/mv_u3d_core.c:39:19: warning: 'driver_desc' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/usb/gadget/gmidi.c:47:19: warning: 'shortname' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/tty/serial/efm32-uart.c:834:20: warning: 'efm32_uart_exit' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable-rt/drivers/thermal/x86_pkg_temp_thermal.c:414:1: warning: no return statement in function returning non-void [-Wreturn-type] 1 /home/broonie/build/linux-stable-rt/drivers/staging/wlan-ng/prism2fw.c:795:1: warning: the frame size of 1072 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable-rt/drivers/staging/vt6656/usbpipe.c:174:5: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 1 /home/broonie/build/linux-stable-rt/drivers/staging/vt6656/usbpipe.c:115:5: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 1 /home/broonie/build/linux-stable-rt/drivers/staging/vt6656/mib.c:385:4: warning: this 'else' clause does not guard... [-Wmisleading-indentation] 1 /home/broonie/build/linux-stable-rt/drivers/staging/vt6656/main_usb.c:1210:7: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 1 /home/broonie/build/linux-stable-rt/drivers/staging/vt6656/iwctl.c:1825:25: warning: 'iwctl_private_handler' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/staging/vt6656/bssdb.c:506:5: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 1 /home/broonie/build/linux-stable-rt/drivers/staging/vt6655/iwctl.c:758:1: warning: the frame size of 1280 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable-rt/drivers/staging/vt6655/device_main.c:3257:1: warning: the frame size of 1864 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable-rt/drivers/staging/sm7xxfb/sm7xxfb.c:117:19: warning: 'sm7xx_vga_setup' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable-rt/drivers/staging/rts5139/rts51x.c:204:13: warning: 'rts51x_try_to_enter_ss' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable-rt/drivers/staging/rtl8712/rtl871x_ioctl_linux.c:69:27: warning: 'iw_operation_mode' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/staging/rtl8712/ieee80211.c:78:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 1 /home/broonie/build/linux-stable-rt/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c:2190:42: warning: array subscript is above array bounds [-Warray-bounds] 1 /home/broonie/build/linux-stable-rt/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c:2188:45: warning: iteration 14 invokes undefined behavior [-Waggressive-loop-optimizations] 1 /home/broonie/build/linux-stable-rt/drivers/staging/frontier/tranzport.c:276:2: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 1 /home/broonie/build/linux-stable-rt/drivers/staging/dgnc/dgnc_tty.c:613:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable-rt/drivers/staging/dgap/dgap_tty.c:664:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable-rt/drivers/staging/dgap/dgap_fep5.c:173:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable-rt/drivers/staging/dgap/dgap_fep5.c:112:1: warning: the frame size of 1040 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable-rt/drivers/staging/dgap/dgap_driver.c:982:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable-rt/drivers/staging/bcm/CmHost.c:1440:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 /home/broonie/build/linux-stable-rt/drivers/staging/bcm/CmHost.c:1426:37: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 /home/broonie/build/linux-stable-rt/drivers/staging/bcm/CmHost.c:1387:39: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 /home/broonie/build/linux-stable-rt/drivers/spi/spi-pl022.c:281:31: warning: large integer implicitly truncated to unsigned type [-Woverflow] 1 /home/broonie/build/linux-stable-rt/drivers/spi/spi-atmel.c:1461:19: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable-rt/drivers/spi/spi-atmel.c:1336:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable-rt/drivers/scsi/ips.c:210:2: warning: #warning "This driver has only been tested on the x86/ia64/x86_64 platforms" [-Wcpp] 1 /home/broonie/build/linux-stable-rt/drivers/scsi/aic7xxx_old.c:8517:5: warning: case value '257' not in enumerated type 'ahc_chip {aka enum <anonymous>}' [-Wswitch] 1 /home/broonie/build/linux-stable-rt/drivers/scsi/aic7xxx_old.c:8510:5: warning: case value '513' not in enumerated type 'ahc_chip {aka enum <anonymous>}' [-Wswitch] 1 /home/broonie/build/linux-stable-rt/drivers/scsi/aic7xxx_old.c:7901:5: warning: case value '257' not in enumerated type 'ahc_chip {aka enum <anonymous>}' [-Wswitch] 1 /home/broonie/build/linux-stable-rt/drivers/scsi/aic7xxx_old.c:7898:5: warning: case value '513' not in enumerated type 'ahc_chip {aka enum <anonymous>}' [-Wswitch] 1 /home/broonie/build/linux-stable-rt/drivers/regulator/tps62360-regulator.c:363:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable-rt/drivers/regulator/pcap-regulator.c:93:27: warning: 'SW3_table' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/power/reset/xgene-reboot.c:80:17: warning: assignment from incompatible pointer type [-Wincompatible-pointer-types] 1 /home/broonie/build/linux-stable-rt/drivers/power/pm2301_charger.c:725:4: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 /home/broonie/build/linux-stable-rt/drivers/power/ab8500_charger.c:1559:4: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 /home/broonie/build/linux-stable-rt/drivers/power/ab8500_charger.c:1390:4: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 /home/broonie/build/linux-stable-rt/drivers/pinctrl/pinctrl-bcm2835.c:1060:2: warning: ignoring return value of 'gpiochip_remove', declared with attribute warn_unused_result [-Wunused-result] 1 /home/broonie/build/linux-stable-rt/drivers/pinctrl/pinctrl-bcm2835.c:1043:3: warning: ignoring return value of 'gpiochip_remove', declared with attribute warn_unused_result [-Wunused-result] 1 /home/broonie/build/linux-stable-rt/drivers/net/wireless/ti/wlcore/spi.c:321:1: warning: the frame size of 9728 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable-rt/drivers/net/wireless/rtlwifi/efuse.c:38:31: warning: 'RTL8712_SDIO_EFUSE_TABLE' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/net/wireless/rtlwifi/efuse.c:34:17: warning: 'MAX_PGPKT_SIZE' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/net/wireless/rtl818x/rtl8187/rtl8225.c:520:17: warning: 'rtl8225z2_tx_power_ofdm' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/net/wireless/libertas_tf/main.c:30:19: warning: 'lbtf_driver_version' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_n.c:9298:18: warning: 'papd_cal_scalars_tbl_core1_rev3' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_n.c:9231:18: warning: 'papd_comp_epsilon_tbl_core1_rev3' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_n.c:9164:18: warning: 'papd_cal_scalars_tbl_core0_rev3' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_n.c:9097:18: warning: 'papd_comp_epsilon_tbl_core0_rev3' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c:1521:33: warning: 'dot11lcnphytbl_rx_gain_info_rev1' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c:483:19: warning: 'retry_limit' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c:36:19: warning: 'brcmf_version' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/net/usb/usbnet.c:85:19: warning: 'driver_name' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/net/usb/r815x.c:197:33: warning: 'r8152_info' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/net/ethernet/dec/tulip/winbond-840.c:911:2: warning: #warning Processor architecture undefined [-Wcpp] 1 /home/broonie/build/linux-stable-rt/drivers/net/ethernet/amd/nmclan_cs.c:625:3: warning: 'pcmcia_request_exclusive_irq' is deprecated [-Wdeprecated-declarations] 1 /home/broonie/build/linux-stable-rt/drivers/mtd/nand/gpmi-nand/gpmi-nand.c:120:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable-rt/drivers/mtd/chips/cfi_cmdset_0020.c:654:1: warning: the frame size of 1192 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable-rt/drivers/misc/bh1770glc.c:184:17: warning: 'prox_curr_ma' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/misc/apds990x.c:191:17: warning: 'ir_currents' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/mfd/tps65217.c:173:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable-rt/drivers/mfd/arizona-core.c:509:10: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable-rt/drivers/media/usb/usbvision/usbvision-core.c:94:18: warning: 'min_imgheight' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/media/usb/usbvision/usbvision-core.c:93:18: warning: 'min_imgwidth' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/media/usb/usbvision/usbvision-core.c:92:18: warning: 'max_imgheight' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/media/usb/usbvision/usbvision-core.c:91:18: warning: 'max_imgwidth' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/media/usb/gspca/ov519.c:375:37: warning: 'ovfx2_cif_mode' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/media/usb/gspca/ov519.c:363:37: warning: 'ovfx2_vga_mode' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/media/tuners/r820t.c:349:18: warning: 'r820t_mixer_gain_steps' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/media/tuners/r820t.c:345:18: warning: 'r820t_lna_gain_steps' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/media/radio/radio-shark2.c:240:13: warning: 'shark_resume_leds' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable-rt/drivers/media/radio/radio-shark.c:274:13: warning: 'shark_resume_leds' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable-rt/drivers/media/dvb-frontends/drxk_hard.c:2223:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 1 /home/broonie/build/linux-stable-rt/drivers/media/dvb-frontends/drxd_hard.c:2695:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 1 /home/broonie/build/linux-stable-rt/drivers/media/dvb-frontends/drxd_hard.c:2635:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 1 /home/broonie/build/linux-stable-rt/drivers/media/dvb-frontends/dib0090.c:852:18: warning: 'rf_ramp_pwm_sband' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/media/dvb-frontends/dib0090.c:800:18: warning: 'bb_ramp_pwm_boost' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/input/misc/xen-kbdfront.c:257:57: warning: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'long long unsigned int' [-Wformat=] 1 /home/broonie/build/linux-stable-rt/drivers/input/joystick/analog.c:171:2: warning: #warning Precise timer not defined for this architecture. [-Wcpp] 1 /home/broonie/build/linux-stable-rt/drivers/iio/adc/exynos_adc.c:112:9: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable-rt/drivers/iio/adc/ad7793.c:449:37: warning: 'ad7797_attribute_group' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/hwmon/nct6775.c:580:18: warning: 'NCT6106_REG_TOLERANCE_H' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/gpio/gpio-mcp23s08.c:643:10: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable-rt/drivers/dma/pl330.c:2317:21: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable-rt/drivers/dma/amba-pl08x.c:1694:3: warning: format '%d' expects argument of type 'int', but argument 6 has type 'size_t {aka long unsigned int}' [-Wformat=] 1 /home/broonie/build/linux-stable-rt/drivers/dma/amba-pl08x.c:1694:3: warning: format '%d' expects argument of type 'int', but argument 5 has type 'size_t {aka long unsigned int}' [-Wformat=] 1 /home/broonie/build/linux-stable-rt/drivers/dma/amba-pl08x.c:1042:5: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'size_t {aka long unsigned int}' [-Wformat=] 1 /home/broonie/build/linux-stable-rt/drivers/ata/pata_hpt366.c:383:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers] 1 /home/broonie/build/linux-stable-rt/drivers/ata/pata_hpt366.c:380:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers] 1 /home/broonie/build/linux-stable-rt/drivers/ata/pata_hpt366.c:377:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers] 1 /home/broonie/build/linux-stable-rt/arch/arm/mach-cns3xxx/pcie.c:350:1: warning: the frame size of 1072 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable-rt/Documentation/misc-devices/mei/mei-amt-version.c:103:5: warning: 'acmd.fd' is used uninitialized in this function [-Wuninitialized] =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- arm64-allnoconfig : PASS, 0 errors, 5 warnings, 0 section mismatches Warnings: /home/broonie/build/linux-stable-rt/mm/swap.c:50:30: warning: 'swapvec_lock' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/mm/swap.c:49:30: warning: 'rotate_lock' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/kernel/workqueue.c:333:30: warning: 'pendingb_lock' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/mm/slub.c:1310:6: warning: unused variable 'idx' [-Wunused-variable] /home/broonie/build/linux-stable-rt/lib/radix-tree.c:97:30: warning: 'radix_tree_preloads_lock' defined but not used [-Wunused-const-variable=] ------------------------------------------------------------------------------- arm64-allmodconfig : FAIL, 9 errors, 152 warnings, 0 section mismatches Errors: /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl330_ids_device_table' isn't known /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__nmk_i2c_ids_device_table' isn't known /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__amba_kmi_idtable_device_table' isn't known /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__mmci_ids_device_table' isn't known /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl030_ids_device_table' isn't known /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl031_ids_device_table' isn't known /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl022_ids_device_table' isn't known /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl010_ids_device_table' isn't known /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl011_ids_device_table' isn't known Warnings: /home/broonie/build/linux-stable-rt/kernel/cpu.c:468:13: warning: 'cpu_notify_nofail' defined but not used [-Wunused-function] /home/broonie/build/linux-stable-rt/mm/swap.c:50:30: warning: 'swapvec_lock' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/mm/swap.c:49:30: warning: 'rotate_lock' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/kernel/workqueue.c:333:30: warning: 'pendingb_lock' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/mm/slub.c:1310:6: warning: unused variable 'idx' [-Wunused-variable] /home/broonie/build/linux-stable-rt/fs/afs/cmservice.c:78:35: warning: 'afs_SRXCBProbeUuid' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/kernel/modsign_pubkey.c:28:31: warning: 'annoy_ccache' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/kernel/cgroup.c:1276:5: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses] /home/broonie/build/linux-stable-rt/sound/pci/ac97/ac97_codec.c:613:38: warning: 'snd_ac97_controls_master_mono' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/sound/soc/codecs/cs42l73.c:383:38: warning: 'xsp_output_mux' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/sound/soc/codecs/cs42l73.c:380:38: warning: 'vsp_output_mux' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/sound/soc/codecs/max98090.c:876:30: warning: 'max98090_pa2en_enum' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/sound/soc/codecs/max98090.c:872:30: warning: 'max98090_pa1en_enum' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/sound/soc/codecs/max98090.c:389:35: warning: 'max98090_alc_tlv' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/sound/soc/codecs/max98090.c:387:35: warning: 'max98090_sidetone_tlv' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/sound/soc/codecs/ml26124.c:71:35: warning: 'ngth' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/sound/soc/codecs/tlv320aic23.c:56:30: warning: 'tlv320aic23_rec_src' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/dma/amba-pl08x.c:1042:5: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'size_t {aka long unsigned int}' [-Wformat=] /home/broonie/build/linux-stable-rt/drivers/dma/amba-pl08x.c:1694:3: warning: format '%d' expects argument of type 'int', but argument 5 has type 'size_t {aka long unsigned int}' [-Wformat=] /home/broonie/build/linux-stable-rt/drivers/dma/amba-pl08x.c:1694:3: warning: format '%d' expects argument of type 'int', but argument 6 has type 'size_t {aka long unsigned int}' [-Wformat=] /home/broonie/build/linux-stable-rt/drivers/dma/pl330.c:2317:21: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable-rt/drivers/gpio/gpio-mcp23s08.c:643:10: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable-rt/sound/soc/codecs/wm8737.c:116:30: warning: 'high_3d' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/fs/cifs/netmisc.c:133:40: warning: 'mapping_table_ERRHRD' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/sound/soc/codecs/wm8900.c:451:38: warning: 'wm8900_dapm_routput2_control' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/sound/soc/codecs/wm8900.c:448:38: warning: 'wm8900_dapm_loutput2_control' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/sound/soc/codecs/wm8974.c:202:38: warning: 'wm8974_mic_boost_controls' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/sound/soc/codecs/wm8974.c:198:38: warning: 'wm8974_aux_boost_controls' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/fs/cifs/cifsacl.c:43:30: warning: 'sid_user' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/sound/soc/codecs/wm8988.c:273:30: warning: 'wm8988_rline_enum' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/sound/soc/codecs/wm8990.c:527:38: warning: 'wm8990_dapm_rxvoice_controls' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/sound/soc/codecs/wm8990.c:126:35: warning: 'out_omix_tlv' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/sound/soc/codecs/wm8990.c:118:35: warning: 'rec_mix_tlv' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/sound/soc/codecs/wm8991.c:526:38: warning: 'wm8991_dapm_rxvoice_controls' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/sound/soc/codecs/wm8991.c:126:27: warning: 'out_omix_tlv' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/sound/soc/codecs/wm8991.c:106:27: warning: 'rec_mix_tlv' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/net/core/skbuff.c:358:30: warning: 'netdev_alloc_lock' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/iio/adc/exynos_adc.c:112:9: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable-rt/drivers/iio/adc/ad7793.c:449:37: warning: 'ad7797_attribute_group' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/input/joystick/analog.c:171:2: warning: #warning Precise timer not defined for this architecture. [-Wcpp] /home/broonie/build/linux-stable-rt/drivers/hwmon/nct6775.c:580:18: warning: 'NCT6106_REG_TOLERANCE_H' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/fs/fscache/object.c:34:25: warning: 'fscache_osm_CREATE_OBJECT' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/net/core/net-sysfs.c:30:19: warning: 'fmt_long_hex' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/input/misc/xen-kbdfront.c:257:57: warning: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'long long unsigned int' [-Wformat=] /home/broonie/build/linux-stable-rt/net/dcb/dcbnl.c:183:32: warning: 'dcbnl_ieee_app' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/fs/ncpfs/dir.c:860:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation] /home/broonie/build/linux-stable-rt/net/ipv4/tcp_ipv4.c:576:30: warning: 'tcp_sk_lock' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/net/ipv4/icmp.c:208:30: warning: 'icmp_sk_lock' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/net/ipv4/ping.c:1146:36: warning: 'ping_v4_seq_ops' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/media/dvb-frontends/drxd_hard.c:2635:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation] /home/broonie/build/linux-stable-rt/drivers/media/dvb-frontends/drxd_hard.c:2695:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation] /home/broonie/build/linux-stable-rt/drivers/media/dvb-frontends/drxk_hard.c:2223:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation] /home/broonie/build/linux-stable-rt/drivers/media/dvb-frontends/dib0090.c:852:18: warning: 'rf_ramp_pwm_sband' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/media/dvb-frontends/dib0090.c:800:18: warning: 'bb_ramp_pwm_boost' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/media/radio/radio-shark.c:274:13: warning: 'shark_resume_leds' defined but not used [-Wunused-function] /home/broonie/build/linux-stable-rt/drivers/media/radio/radio-shark2.c:240:13: warning: 'shark_resume_leds' defined but not used [-Wunused-function] /home/broonie/build/linux-stable-rt/drivers/media/tuners/r820t.c:349:18: warning: 'r820t_mixer_gain_steps' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/media/tuners/r820t.c:345:18: warning: 'r820t_lna_gain_steps' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/lib/radix-tree.c:97:30: warning: 'radix_tree_preloads_lock' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/net/mac80211/debugfs.c:70:23: warning: 'rate_ctrl_alg_ops' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/net/mac80211/debugfs_sta.c:35:37: warning: 'sta_aid_ops' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/mfd/arizona-core.c:509:10: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable-rt/drivers/mfd/tps65217.c:173:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable-rt/drivers/media/usb/gspca/ov519.c:375:37: warning: 'ovfx2_cif_mode' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/media/usb/gspca/ov519.c:363:37: warning: 'ovfx2_vga_mode' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/misc/bh1770glc.c:184:17: warning: 'prox_curr_ma' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/misc/apds990x.c:191:17: warning: 'ir_currents' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/media/usb/usbvision/usbvision-core.c:94:18: warning: 'min_imgheight' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/media/usb/usbvision/usbvision-core.c:93:18: warning: 'min_imgwidth' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/media/usb/usbvision/usbvision-core.c:92:18: warning: 'max_imgheight' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/media/usb/usbvision/usbvision-core.c:91:18: warning: 'max_imgwidth' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/net/netfilter/xt_recent.c:103:37: warning: 'recent_old_fops' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/power/reset/xgene-reboot.c:80:17: warning: assignment from incompatible pointer type [-Wincompatible-pointer-types] /home/broonie/build/linux-stable-rt/net/sched/sch_choke.c:589:37: warning: 'choke_class_ops' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/regulator/pcap-regulator.c:93:27: warning: 'SW3_table' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/regulator/tps62360-regulator.c:363:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable-rt/drivers/net/ethernet/smsc/smc91x.c:1899:7: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable-rt/drivers/spi/spi-atmel.c:1336:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable-rt/drivers/spi/spi-atmel.c:1461:19: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable-rt/drivers/spi/spi-pl022.c:281:31: warning: large integer implicitly truncated to unsigned type [-Woverflow] /home/broonie/build/linux-stable-rt/drivers/staging/bcm/CmHost.c:1387:39: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] /home/broonie/build/linux-stable-rt/drivers/staging/bcm/CmHost.c:1426:37: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] /home/broonie/build/linux-stable-rt/drivers/staging/bcm/CmHost.c:1440:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] /home/broonie/build/linux-stable-rt/net/wireless/nl80211.c:393:1: warning: 'nl80211_wowlan_tcp_policy' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/net/wireless/nl80211.c:380:1: warning: 'nl80211_wowlan_policy' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/net/usb/r815x.c:197:33: warning: 'r8152_info' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/net/usb/usbnet.c:85:19: warning: 'driver_name' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/staging/frontier/tranzport.c:276:2: warning: this 'if' clause does not guard... [-Wmisleading-indentation] /home/broonie/build/linux-stable-rt/include/linux/compiler-gcc.h:136:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:414:29: warning: 'seq_el_on' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:402:29: warning: 'seq_els_en' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:390:29: warning: 'seq_gls_en' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:378:29: warning: 'seq_sd_amp_en' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:366:29: warning: 'seq_gam_amp_en' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:356:29: warning: 'seq_vbl_amp_en' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:346:29: warning: 'seq_vbh_amp_en' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:334:29: warning: 'seq_vint_amp_en' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:324:29: warning: 'seq_vmos_amp_en' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:314:29: warning: 'seq_vgl_amp_en' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:304:29: warning: 'seq_vgh_amp_en' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:294:29: warning: 'seq_vreg1_amp_en' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:284:29: warning: 'seq_vl3_en' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:274:29: warning: 'seq_vci1_2nd_en' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:264:29: warning: 'seq_vl2_en' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:254:29: warning: 'seq_vl1_en' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:244:29: warning: 'seq_vci1_1st_en' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:212:29: warning: 'seq_pwr_ctrl' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:187:29: warning: 'seq_apon' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:92:29: warning: 'seq_swreset' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/video/backlight/lms501kf03.c:100:28: warning: 'seq_sleep_in' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/video/backlight/lms501kf03.c:96:28: warning: 'seq_up_dn' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/video/backlight/s6e63m0.c:331:29: warning: 'seq_elvss_off' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/video/backlight/s6e63m0.c:317:29: warning: 'seq_acl_off' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c:2188:45: warning: iteration 14 invokes undefined behavior [-Waggressive-loop-optimizations] /home/broonie/build/linux-stable-rt/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c:2190:42: warning: array subscript is above array bounds [-Warray-bounds] /home/broonie/build/linux-stable-rt/drivers/usb/gadget/gmidi.c:47:19: warning: 'shortname' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:941:59: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] /home/broonie/build/linux-stable-rt/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:2629:62: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] /home/broonie/build/linux-stable-rt/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:4043:54: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] /home/broonie/build/linux-stable-rt/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:4052:42: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] /home/broonie/build/linux-stable-rt/drivers/usb/gadget/nokia.c:45:19: warning: 'product_nokia' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/video/xen-fbfront.c:588:57: warning: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'long long unsigned int' [-Wformat=] /home/broonie/build/linux-stable-rt/drivers/usb/gadget/mv_udc_core.c:62:19: warning: 'driver_desc' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/staging/rtl8712/rtl871x_ioctl_linux.c:69:27: warning: 'iw_operation_mode' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/staging/rtl8712/ieee80211.c:78:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation] /home/broonie/build/linux-stable-rt/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c:36:19: warning: 'brcmf_version' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/usb/gadget/mv_u3d_core.c:39:19: warning: 'driver_desc' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c:483:19: warning: 'retry_limit' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/staging/rts5139/rts51x.c:204:13: warning: 'rts51x_try_to_enter_ss' defined but not used [-Wunused-function] /home/broonie/build/linux-stable-rt/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c:1521:33: warning: 'dot11lcnphytbl_rx_gain_info_rev1' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_n.c:9298:18: warning: 'papd_cal_scalars_tbl_core1_rev3' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_n.c:9231:18: warning: 'papd_comp_epsilon_tbl_core1_rev3' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_n.c:9164:18: warning: 'papd_cal_scalars_tbl_core0_rev3' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_n.c:9097:18: warning: 'papd_comp_epsilon_tbl_core0_rev3' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/usb/storage/realtek_cr.c:699:13: warning: 'fw5895_init' defined but not used [-Wunused-function] /home/broonie/build/linux-stable-rt/drivers/usb/storage/realtek_cr.c:629:12: warning: 'config_autodelink_before_power_down' defined but not used [-Wunused-function] /home/broonie/build/linux-stable-rt/drivers/staging/vt6656/main_usb.c:1210:7: warning: this 'if' clause does not guard... [-Wmisleading-indentation] /home/broonie/build/linux-stable-rt/drivers/usb/serial/garmin_gps.c:205:28: warning: 'PRIVATE_REQ' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/usb/serial/garmin_gps.c:199:28: warning: 'GARMIN_STOP_PVT_REQ' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/usb/serial/garmin_gps.c:197:28: warning: 'GARMIN_START_PVT_REQ' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/usb/serial/garmin_gps.c:195:28: warning: 'GARMIN_APP_LAYER_REPLY' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/staging/vt6656/bssdb.c:506:5: warning: this 'if' clause does not guard... [-Wmisleading-indentation] /home/broonie/build/linux-stable-rt/drivers/staging/vt6656/mib.c:385:4: warning: this 'else' clause does not guard... [-Wmisleading-indentation] /home/broonie/build/linux-stable-rt/drivers/staging/vt6656/iwctl.c:1825:25: warning: 'iwctl_private_handler' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/staging/vt6656/usbpipe.c:115:5: warning: this 'if' clause does not guard... [-Wmisleading-indentation] /home/broonie/build/linux-stable-rt/drivers/staging/vt6656/usbpipe.c:174:5: warning: this 'if' clause does not guard... [-Wmisleading-indentation] /home/broonie/build/linux-stable-rt/drivers/net/wireless/libertas_tf/main.c:30:19: warning: 'lbtf_driver_version' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/net/wireless/rtl818x/rtl8187/rtl8225.c:520:17: warning: 'rtl8225z2_tx_power_ofdm' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/net/wireless/rtlwifi/efuse.c:38:31: warning: 'RTL8712_SDIO_EFUSE_TABLE' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/net/wireless/rtlwifi/efuse.c:34:17: warning: 'MAX_PGPKT_SIZE' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/include/linux/compiler-gcc.h:136:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] /home/broonie/build/linux-stable-rt/drivers/net/wireless/ti/wlcore/spi.c:321:1: warning: the frame size of 9728 bytes is larger than 2048 bytes [-Wframe-larger-than=] ------------------------------------------------------------------------------- arm-multi_v7_defconfig : PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: /home/broonie/build/linux-stable-rt/mm/slub.c:1310:6: warning: unused variable 'idx' [-Wunused-variable] /home/broonie/build/linux-stable-rt/fs/nfs/nfs4proc.c:2925:10: warning: switch condition has boolean value [-Wswitch-bool] ------------------------------------------------------------------------------- x86_64-defconfig : PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: /home/broonie/build/linux-stable-rt/mm/slub.c:1310:6: warning: unused variable 'idx' [-Wunused-variable] /home/broonie/build/linux-stable-rt/drivers/thermal/x86_pkg_temp_thermal.c:414:1: warning: no return statement in function returning non-void [-Wreturn-type] ------------------------------------------------------------------------------- arm-allmodconfig : PASS, 0 errors, 38 warnings, 0 section mismatches Warnings: /home/broonie/build/linux-stable-rt/arch/arm/mach-cns3xxx/pcie.c:350:1: warning: the frame size of 1072 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable-rt/mm/slub.c:1310:6: warning: unused variable 'idx' [-Wunused-variable] /home/broonie/build/linux-stable-rt/drivers/ata/pata_hpt366.c:377:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers] /home/broonie/build/linux-stable-rt/drivers/ata/pata_hpt366.c:380:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers] /home/broonie/build/linux-stable-rt/drivers/ata/pata_hpt366.c:383:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers] /home/broonie/build/linux-stable-rt/fs/nfs/nfs4proc.c:2925:10: warning: switch condition has boolean value [-Wswitch-bool] /home/broonie/build/linux-stable-rt/net/sunrpc/xprtrdma/verbs.c:1774:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable-rt/drivers/mtd/chips/cfi_cmdset_0020.c:654:1: warning: the frame size of 1192 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable-rt/drivers/mtd/nand/gpmi-nand/gpmi-nand.c:120:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] /home/broonie/build/linux-stable-rt/drivers/pinctrl/pinctrl-bcm2835.c:1060:2: warning: ignoring return value of 'gpiochip_remove', declared with attribute warn_unused_result [-Wunused-result] /home/broonie/build/linux-stable-rt/drivers/pinctrl/pinctrl-bcm2835.c:1043:3: warning: ignoring return value of 'gpiochip_remove', declared with attribute warn_unused_result [-Wunused-result] /home/broonie/build/linux-stable-rt/drivers/power/ab8500_charger.c:1390:4: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] /home/broonie/build/linux-stable-rt/drivers/power/ab8500_charger.c:1559:4: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] /home/broonie/build/linux-stable-rt/drivers/net/ethernet/amd/nmclan_cs.c:625:3: warning: 'pcmcia_request_exclusive_irq' is deprecated [-Wdeprecated-declarations] /home/broonie/build/linux-stable-rt/drivers/power/pm2301_charger.c:725:4: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] /home/broonie/build/linux-stable-rt/drivers/net/ethernet/dec/tulip/winbond-840.c:911:2: warning: #warning Processor architecture undefined [-Wcpp] /home/broonie/build/linux-stable-rt/drivers/tty/serial/efm32-uart.c:834:20: warning: 'efm32_uart_exit' defined but not used [-Wunused-function] /home/broonie/build/linux-stable-rt/drivers/staging/dgap/dgap_driver.c:982:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable-rt/drivers/staging/dgap/dgap_fep5.c:173:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable-rt/drivers/staging/dgap/dgap_fep5.c:112:1: warning: the frame size of 1040 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable-rt/drivers/staging/dgap/dgap_tty.c:664:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable-rt/drivers/staging/dgnc/dgnc_tty.c:613:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable-rt/drivers/video/aty/radeon_pm.c:1718:13: warning: 'radeon_reinitialize_M10' defined but not used [-Wunused-function] /home/broonie/build/linux-stable-rt/drivers/scsi/aic7xxx_old.c:7901:5: warning: case value '257' not in enumerated type 'ahc_chip {aka enum <anonymous>}' [-Wswitch] /home/broonie/build/linux-stable-rt/drivers/scsi/aic7xxx_old.c:7898:5: warning: case value '513' not in enumerated type 'ahc_chip {aka enum <anonymous>}' [-Wswitch] /home/broonie/build/linux-stable-rt/drivers/scsi/aic7xxx_old.c:8517:5: warning: case value '257' not in enumerated type 'ahc_chip {aka enum <anonymous>}' [-Wswitch] /home/broonie/build/linux-stable-rt/drivers/scsi/aic7xxx_old.c:8510:5: warning: case value '513' not in enumerated type 'ahc_chip {aka enum <anonymous>}' [-Wswitch] /home/broonie/build/linux-stable-rt/drivers/scsi/ips.c:210:2: warning: #warning "This driver has only been tested on the x86/ia64/x86_64 platforms" [-Wcpp] /home/broonie/build/linux-stable-rt/drivers/video/omap2/displays-new/panel-sony-acx565akm.c:608:25: warning: unused variable 'ddata' [-Wunused-variable] /home/broonie/build/linux-stable-rt/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:941:59: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] /home/broonie/build/linux-stable-rt/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:2629:62: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] /home/broonie/build/linux-stable-rt/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:4043:54: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] /home/broonie/build/linux-stable-rt/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:4052:42: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] /home/broonie/build/linux-stable-rt/drivers/staging/sm7xxfb/sm7xxfb.c:117:19: warning: 'sm7xx_vga_setup' defined but not used [-Wunused-function] /home/broonie/build/linux-stable-rt/drivers/staging/vt6655/device_main.c:3257:1: warning: the frame size of 1864 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable-rt/drivers/staging/wlan-ng/prism2fw.c:795:1: warning: the frame size of 1072 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable-rt/drivers/staging/vt6655/iwctl.c:758:1: warning: the frame size of 1280 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable-rt/Documentation/misc-devices/mei/mei-amt-version.c:103:5: warning: 'acmd.fd' is used uninitialized in this function [-Wuninitialized] ------------------------------------------------------------------------------- arm-allnoconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: /home/broonie/build/linux-stable-rt/mm/slub.c:1310:6: warning: unused variable 'idx' [-Wunused-variable] ------------------------------------------------------------------------------- x86_64-allnoconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: /home/broonie/build/linux-stable-rt/mm/slub.c:1310:6: warning: unused variable 'idx' [-Wunused-variable] ------------------------------------------------------------------------------- arm64-defconfig : PASS, 0 errors, 14 warnings, 0 section mismatches Warnings: /home/broonie/build/linux-stable-rt/kernel/cpu.c:468:13: warning: 'cpu_notify_nofail' defined but not used [-Wunused-function] /home/broonie/build/linux-stable-rt/mm/swap.c:50:30: warning: 'swapvec_lock' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/mm/swap.c:49:30: warning: 'rotate_lock' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/kernel/workqueue.c:333:30: warning: 'pendingb_lock' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/net/core/skbuff.c:358:30: warning: 'netdev_alloc_lock' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/mm/slub.c:1310:6: warning: unused variable 'idx' [-Wunused-variable] /home/broonie/build/linux-stable-rt/net/core/net-sysfs.c:30:19: warning: 'fmt_long_hex' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/net/ethernet/smsc/smc91x.c:1899:7: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable-rt/kernel/cgroup.c:1276:5: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses] /home/broonie/build/linux-stable-rt/lib/radix-tree.c:97:30: warning: 'radix_tree_preloads_lock' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/net/ipv4/tcp_ipv4.c:576:30: warning: 'tcp_sk_lock' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/net/ipv4/arp.c:152:31: warning: 'arp_broken_ops' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/net/ipv4/icmp.c:208:30: warning: 'icmp_sk_lock' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/net/ipv4/ping.c:1146:36: warning: 'ping_v4_seq_ops' defined but not used [-Wunused-const-variable=] ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches:

7 years, 9 months

master build: 0 failures 3 warnings (v4.11-rc2-228-gd11507e)

by Build bot for Mark Brown

Tree/Branch: master Git describe: v4.11-rc2-228-gd11507e Commit: d11507e197 Merge tag 'xfs-4.11-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux Build Time: 176 min 33 sec Passed: 10 / 10 (100.00 %) Failed: 0 / 10 ( 0.00 %) Errors: 0 Warnings: 3 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): 1 warnings 0 mismatches : arm64-allnoconfig 2 warnings 0 mismatches : arm64-allmodconfig 2 warnings 0 mismatches : arm-multi_v5_defconfig 2 warnings 0 mismatches : arm-multi_v7_defconfig 4 warnings 0 mismatches : arm-allmodconfig 1 warnings 0 mismatches : arm-allnoconfig 1 warnings 0 mismatches : arm-multi_v4t_defconfig 2 warnings 0 mismatches : arm64-defconfig ------------------------------------------------------------------------------- Warnings Summary: 3 13 <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] 1 ../include/linux/device.h:1479:15: warning: passing argument 1 of 'platform_driver_unregister' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] 1 ../include/linux/device.h:1474:20: warning: passing argument 1 of '__platform_driver_register' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- arm64-allnoconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] ------------------------------------------------------------------------------- arm64-allmodconfig : PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] ------------------------------------------------------------------------------- arm-multi_v5_defconfig : PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] ------------------------------------------------------------------------------- arm-multi_v7_defconfig : PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] ------------------------------------------------------------------------------- arm-allmodconfig : PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] ../include/linux/device.h:1474:20: warning: passing argument 1 of '__platform_driver_register' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] ../include/linux/device.h:1479:15: warning: passing argument 1 of 'platform_driver_unregister' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] ------------------------------------------------------------------------------- arm-allnoconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] ------------------------------------------------------------------------------- arm-multi_v4t_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] ------------------------------------------------------------------------------- arm64-defconfig : PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: x86_64-allnoconfig x86_64-defconfig

7 years, 9 months

mainline build: 208 builds: 1 failed, 207 passed, 422 warnings (v4.11-rc2-235-gd528ae0d3dfe)

by kernelci.org bot

mainline build: 208 builds: 1 failed, 207 passed, 422 warnings (v4.11-rc2-235-gd528ae0d3dfe) Full Build Summary: https://kernelci.org/build/mainline/kernel/v4.11-rc2-235-gd528ae0d3dfe/ Tree: mainline Branch: local/master Git Describe: v4.11-rc2-235-gd528ae0d3dfe Git Commit: d528ae0d3dfedea553812c957a6ed1e87feeed8a Git URL: http://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git Built: 4 unique architectures Build Failure Detected: x86: gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) allmodconfig+CONFIG_OF=n: FAIL Warnings Detected: arm64: gcc version 5.3.1 20160412 (Linaro GCC 5.3-2016.05) allmodconfig: 2 warnings allnoconfig: 1 warning defconfig: 2 warnings defconfig+CONFIG_CPU_BIG_ENDIAN=y: 2 warnings defconfig+CONFIG_EXPERT=y+CONFIG_ACPI=y: 2 warnings defconfig+CONFIG_KASAN=y: 6 warnings defconfig+CONFIG_LKDTM=y: 2 warnings defconfig+CONFIG_OF_UNITTEST=y: 2 warnings defconfig+CONFIG_RANDOMIZE_BASE=y: 2 warnings tinyconfig: 1 warning arm: gcc version 5.3.1 20160412 (Linaro GCC 5.3-2016.05) acs5k_defconfig: 2 warnings acs5k_tiny_defconfig: 2 warnings allmodconfig: 4 warnings allnoconfig: 1 warning am200epdkit_defconfig: 2 warnings aspeed_g4_defconfig: 2 warnings aspeed_g5_defconfig: 2 warnings assabet_defconfig: 2 warnings at91_dt_defconfig: 2 warnings axm55xx_defconfig: 2 warnings badge4_defconfig: 2 warnings bcm2835_defconfig: 1 warning cerfcube_defconfig: 2 warnings clps711x_defconfig: 1 warning cm_x2xx_defconfig: 2 warnings cm_x300_defconfig: 2 warnings cns3420vb_defconfig: 2 warnings colibri_pxa270_defconfig: 2 warnings colibri_pxa300_defconfig: 2 warnings collie_defconfig: 1 warning corgi_defconfig: 2 warnings davinci_all_defconfig: 2 warnings dove_defconfig: 2 warnings ebsa110_defconfig: 2 warnings efm32_defconfig: 1 warning em_x270_defconfig: 2 warnings ep93xx_defconfig: 2 warnings eseries_pxa_defconfig: 2 warnings exynos_defconfig: 2 warnings ezx_defconfig: 2 warnings footbridge_defconfig: 2 warnings h3600_defconfig: 2 warnings h5000_defconfig: 2 warnings hackkit_defconfig: 2 warnings hisi_defconfig: 1 warning imote2_defconfig: 2 warnings imx_v4_v5_defconfig: 2 warnings imx_v6_v7_defconfig: 4 warnings integrator_defconfig: 2 warnings iop13xx_defconfig: 2 warnings iop32x_defconfig: 2 warnings iop33x_defconfig: 2 warnings ixp4xx_defconfig: 2 warnings jornada720_defconfig: 2 warnings keystone_defconfig: 2 warnings ks8695_defconfig: 2 warnings lart_defconfig: 2 warnings lpc18xx_defconfig: 1 warning lpc32xx_defconfig: 2 warnings lpd270_defconfig: 2 warnings lubbock_defconfig: 2 warnings magician_defconfig: 2 warnings mainstone_defconfig: 2 warnings mini2440_defconfig: 2 warnings mmp2_defconfig: 2 warnings moxart_defconfig: 1 warning mps2_defconfig: 1 warning multi_v4t_defconfig: 1 warning multi_v5_defconfig: 2 warnings multi_v7_defconfig: 2 warnings multi_v7_defconfig+CONFIG_ARM_LPAE=y: 2 warnings multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y: 2 warnings multi_v7_defconfig+CONFIG_EFI=y: 2 warnings multi_v7_defconfig+CONFIG_EFI=y+CONFIG_ARM_LPAE=y: 2 warnings multi_v7_defconfig+CONFIG_LKDTM=y: 2 warnings multi_v7_defconfig+CONFIG_PROVE_LOCKING=y: 2 warnings multi_v7_defconfig+CONFIG_SMP=n: 2 warnings multi_v7_defconfig+CONFIG_THUMB2_KERNEL=y+CONFIG_ARM_MODULE_PLTS=y: 2 warnings mv78xx0_defconfig: 2 warnings mvebu_v5_defconfig: 2 warnings mvebu_v7_defconfig: 2 warnings mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y: 2 warnings mxs_defconfig: 2 warnings neponset_defconfig: 2 warnings netwinder_defconfig: 1 warning netx_defconfig: 2 warnings nhk8815_defconfig: 2 warnings nuc910_defconfig: 1 warning nuc950_defconfig: 1 warning nuc960_defconfig: 1 warning omap1_defconfig: 2 warnings omap2plus_defconfig: 2 warnings orion5x_defconfig: 2 warnings palmz72_defconfig: 2 warnings pcm027_defconfig: 2 warnings pleb_defconfig: 2 warnings prima2_defconfig: 2 warnings pxa168_defconfig: 2 warnings pxa255-idp_defconfig: 2 warnings pxa3xx_defconfig: 2 warnings pxa910_defconfig: 2 warnings pxa_defconfig: 2 warnings qcom_defconfig: 2 warnings raumfeld_defconfig: 2 warnings realview_defconfig: 2 warnings rpc_defconfig: 2 warnings s3c2410_defconfig: 2 warnings s3c6400_defconfig: 2 warnings s5pv210_defconfig: 2 warnings sama5_defconfig: 2 warnings shannon_defconfig: 2 warnings shmobile_defconfig: 1 warning simpad_defconfig: 2 warnings socfpga_defconfig: 2 warnings spear13xx_defconfig: 2 warnings spear3xx_defconfig: 2 warnings spear6xx_defconfig: 2 warnings spitz_defconfig: 2 warnings stm32_defconfig: 1 warning sunxi_defconfig: 2 warnings tango4_defconfig: 2 warnings tct_hammer_defconfig: 2 warnings tegra_defconfig: 2 warnings tinyconfig: 1 warning trizeps4_defconfig: 2 warnings u300_defconfig: 2 warnings u8500_defconfig: 2 warnings versatile_defconfig: 2 warnings versatile_defconfig+CONFIG_OF_UNITTEST=y: 2 warnings vexpress_defconfig: 2 warnings vf610m4_defconfig: 1 warning viper_defconfig: 2 warnings vt8500_v6_v7_defconfig: 1 warning xcep_defconfig: 2 warnings zeus_defconfig: 2 warnings zx_defconfig: 1 warning mips: gcc version 6.3.0 (GCC) allnoconfig: 1 warning ar7_defconfig: 2 warnings ath25_defconfig: 2 warnings ath79_defconfig: 2 warnings bcm47xx_defconfig: 2 warnings bcm63xx_defconfig: 1 warning bigsur_defconfig: 6 warnings bmips_be_defconfig: 1 warning bmips_stb_defconfig: 1 warning capcella_defconfig: 2 warnings cavium_octeon_defconfig: 6 warnings ci20_defconfig: 1 warning cobalt_defconfig: 2 warnings db1xxx_defconfig: 1 warning decstation_defconfig: 2 warnings defconfig+CONFIG_LKDTM=y: 2 warnings e55_defconfig: 2 warnings fuloong2e_defconfig: 6 warnings generic_defconfig: 3 warnings gpr_defconfig: 2 warnings ip22_defconfig: 2 warnings ip27_defconfig: 6 warnings ip28_defconfig: 6 warnings ip32_defconfig: 6 warnings jazz_defconfig: 2 warnings jmr3927_defconfig: 1 warning lasat_defconfig: 1 warning lemote2f_defconfig: 6 warnings loongson1b_defconfig: 2 warnings loongson1c_defconfig: 2 warnings loongson3_defconfig: 6 warnings malta_defconfig: 2 warnings malta_kvm_defconfig: 2 warnings malta_kvm_guest_defconfig: 2 warnings malta_qemu_32r6_defconfig: 2 warnings maltaaprp_defconfig: 2 warnings maltasmvp_defconfig: 2 warnings maltasmvp_eva_defconfig: 2 warnings maltaup_defconfig: 2 warnings maltaup_xpa_defconfig: 2 warnings markeins_defconfig: 2 warnings mips_paravirt_defconfig: 6 warnings mpc30x_defconfig: 2 warnings msp71xx_defconfig: 2 warnings mtx1_defconfig: 2 warnings nlm_xlp_defconfig: 6 warnings nlm_xlr_defconfig: 2 warnings pic32mzda_defconfig: 2 warnings pistachio_defconfig: 2 warnings pnx8335_stb225_defconfig: 2 warnings qi_lb60_defconfig: 2 warnings rb532_defconfig: 2 warnings rbtx49xx_defconfig: 2 warnings rm200_defconfig: 2 warnings rt305x_defconfig: 2 warnings sb1250_swarm_defconfig: 4 warnings tb0219_defconfig: 2 warnings tb0226_defconfig: 2 warnings tb0287_defconfig: 2 warnings tinyconfig: 1 warning workpad_defconfig: 2 warnings xilfpga_defconfig: 1 warning xway_defconfig: 2 warnings x86: gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) defconfig+CONFIG_KASAN=y: 5 warnings Warnings summary: 409 <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] 2 include/linux/device.h:1478:15: warning: passing argument 1 of 'platform_driver_unregister' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] 2 include/linux/device.h:1473:20: warning: passing argument 1 of '__platform_driver_register' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] 1 net/wireless/nl80211.c:5743:1: warning: the frame size of 2064 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 net/wireless/nl80211.c:4443:1: warning: the frame size of 2240 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 net/wireless/nl80211.c:4443:1: warning: the frame size of 2232 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 net/wireless/nl80211.c:1904:1: warning: the frame size of 3840 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 net/wireless/nl80211.c:1904:1: warning: the frame size of 3784 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 net/wireless/nl80211.c:1415:1: warning: the frame size of 2232 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 net/wireless/nl80211.c:1415:1: warning: the frame size of 2208 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 net/bridge/br_netlink.c:1339:1: warning: the frame size of 2544 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 drivers/tty/vt/keyboard.c:1472:1: warning: the frame size of 2344 bytes is larger than 2048 bytes [-Wframe-larger-than=] ================================================================================ Detailed per-defconfig build reports: -------------------------------------------------------------------------------- acs5k_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- acs5k_tiny_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- allmodconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] include/linux/device.h:1473:20: warning: passing argument 1 of '__platform_driver_register' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] include/linux/device.h:1478:15: warning: passing argument 1 of 'platform_driver_unregister' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- allmodconfig (arm64) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- allmodconfig (x86) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- allmodconfig+CONFIG_OF=n (x86) — FAIL, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- allnoconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- allnoconfig (arm64) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- allnoconfig (mips) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- allnoconfig (x86) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- am200epdkit_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- ar7_defconfig (mips) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- aspeed_g4_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- aspeed_g5_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- assabet_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- at91_dt_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- ath25_defconfig (mips) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- ath79_defconfig (mips) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- axm55xx_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- badge4_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- bcm2835_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- bcm47xx_defconfig (mips) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- bcm63xx_defconfig (mips) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- bigsur_defconfig (mips) — PASS, 0 errors, 6 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- bmips_be_defconfig (mips) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- bmips_stb_defconfig (mips) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- capcella_defconfig (mips) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- cavium_octeon_defconfig (mips) — PASS, 0 errors, 6 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- cerfcube_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- ci20_defconfig (mips) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- clps711x_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- cm_x2xx_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- cm_x300_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- cns3420vb_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- cobalt_defconfig (mips) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- colibri_pxa270_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- colibri_pxa300_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- collie_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- corgi_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- davinci_all_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- db1xxx_defconfig (mips) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- decstation_defconfig (mips) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- defconfig (arm64) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- defconfig+CONFIG_CPU_BIG_ENDIAN=y (arm64) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- defconfig+CONFIG_EXPERT=y+CONFIG_ACPI=y (arm64) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- defconfig+CONFIG_KASAN=y (arm64) — PASS, 0 errors, 6 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] net/bridge/br_netlink.c:1339:1: warning: the frame size of 2544 bytes is larger than 2048 bytes [-Wframe-larger-than=] net/wireless/nl80211.c:1415:1: warning: the frame size of 2208 bytes is larger than 2048 bytes [-Wframe-larger-than=] net/wireless/nl80211.c:1904:1: warning: the frame size of 3840 bytes is larger than 2048 bytes [-Wframe-larger-than=] net/wireless/nl80211.c:4443:1: warning: the frame size of 2240 bytes is larger than 2048 bytes [-Wframe-larger-than=] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- defconfig+CONFIG_KASAN=y (x86) — PASS, 0 errors, 5 warnings, 0 section mismatches Warnings: net/wireless/nl80211.c:1415:1: warning: the frame size of 2232 bytes is larger than 2048 bytes [-Wframe-larger-than=] net/wireless/nl80211.c:4443:1: warning: the frame size of 2232 bytes is larger than 2048 bytes [-Wframe-larger-than=] net/wireless/nl80211.c:5743:1: warning: the frame size of 2064 bytes is larger than 2048 bytes [-Wframe-larger-than=] net/wireless/nl80211.c:1904:1: warning: the frame size of 3784 bytes is larger than 2048 bytes [-Wframe-larger-than=] drivers/tty/vt/keyboard.c:1472:1: warning: the frame size of 2344 bytes is larger than 2048 bytes [-Wframe-larger-than=] -------------------------------------------------------------------------------- defconfig+CONFIG_LKDTM=y (arm64) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- defconfig+CONFIG_LKDTM=y (mips) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- defconfig+CONFIG_LKDTM=y (x86) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+CONFIG_OF_UNITTEST=y (arm64) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- defconfig+CONFIG_OF_UNITTEST=y (x86) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+CONFIG_RANDOMIZE_BASE=y (arm64) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- dove_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- e55_defconfig (mips) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- ebsa110_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- efm32_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- em_x270_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- ep93xx_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- eseries_pxa_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- exynos_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- ezx_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- footbridge_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- fuloong2e_defconfig (mips) — PASS, 0 errors, 6 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- generic_defconfig (mips) — PASS, 0 errors, 3 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- gpr_defconfig (mips) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- h3600_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- h5000_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- hackkit_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- hisi_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- i386_defconfig (x86) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- imote2_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- imx_v4_v5_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- imx_v6_v7_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] include/linux/device.h:1473:20: warning: passing argument 1 of '__platform_driver_register' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] include/linux/device.h:1478:15: warning: passing argument 1 of 'platform_driver_unregister' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- integrator_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- iop13xx_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- iop32x_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- iop33x_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- ip22_defconfig (mips) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- ip27_defconfig (mips) — PASS, 0 errors, 6 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- ip28_defconfig (mips) — PASS, 0 errors, 6 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- ip32_defconfig (mips) — PASS, 0 errors, 6 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- ixp4xx_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- jazz_defconfig (mips) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- jmr3927_defconfig (mips) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- jornada720_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- keystone_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- ks8695_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- lart_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- lasat_defconfig (mips) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- lemote2f_defconfig (mips) — PASS, 0 errors, 6 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- loongson1b_defconfig (mips) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- loongson1c_defconfig (mips) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- loongson3_defconfig (mips) — PASS, 0 errors, 6 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- lpc18xx_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- lpc32xx_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- lpd270_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- lubbock_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- magician_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- mainstone_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- malta_defconfig (mips) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- malta_kvm_defconfig (mips) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- malta_kvm_guest_defconfig (mips) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- malta_qemu_32r6_defconfig (mips) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- maltaaprp_defconfig (mips) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- maltasmvp_defconfig (mips) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- maltasmvp_eva_defconfig (mips) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- maltaup_defconfig (mips) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- maltaup_xpa_defconfig (mips) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- markeins_defconfig (mips) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- mini2440_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- mips_paravirt_defconfig (mips) — PASS, 0 errors, 6 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- mmp2_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- moxart_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- mpc30x_defconfig (mips) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- mps2_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- msp71xx_defconfig (mips) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- mtx1_defconfig (mips) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- multi_v4t_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- multi_v5_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- multi_v7_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_ARM_LPAE=y (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_EFI=y (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_EFI=y+CONFIG_ARM_LPAE=y (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_LKDTM=y (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_PROVE_LOCKING=y (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_SMP=n (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_THUMB2_KERNEL=y+CONFIG_ARM_MODULE_PLTS=y (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- mv78xx0_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- mvebu_v5_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- mvebu_v7_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- mxs_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- neponset_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- netwinder_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- netx_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- nhk8815_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- nlm_xlp_defconfig (mips) — PASS, 0 errors, 6 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- nlm_xlr_defconfig (mips) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- nuc910_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- nuc950_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- nuc960_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- omap1_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- omap2plus_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- orion5x_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- palmz72_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- pcm027_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- pic32mzda_defconfig (mips) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- pistachio_defconfig (mips) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- pleb_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- pnx8335_stb225_defconfig (mips) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- prima2_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- pxa168_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- pxa255-idp_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- pxa3xx_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- pxa910_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- pxa_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- qcom_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- qi_lb60_defconfig (mips) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- raumfeld_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- rb532_defconfig (mips) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- rbtx49xx_defconfig (mips) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- realview_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- rm200_defconfig (mips) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- rpc_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- rt305x_defconfig (mips) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- s3c2410_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- s3c6400_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- s5pv210_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- sama5_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- sb1250_swarm_defconfig (mips) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- shannon_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- shmobile_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- simpad_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- socfpga_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- spear13xx_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- spear3xx_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- spear6xx_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- spitz_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- stm32_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- sunxi_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- tango4_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- tb0219_defconfig (mips) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- tb0226_defconfig (mips) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- tb0287_defconfig (mips) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- tct_hammer_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- tegra_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- tinyconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- tinyconfig (arm64) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- tinyconfig (mips) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- tinyconfig (x86) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- trizeps4_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- u300_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- u8500_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- versatile_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- versatile_defconfig+CONFIG_OF_UNITTEST=y (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- vexpress_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- vf610m4_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- viper_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- vt8500_v6_v7_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- workpad_defconfig (mips) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- x86_64_defconfig (x86) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- xcep_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- xilfpga_defconfig (mips) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- xway_defconfig (mips) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- zeus_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] -------------------------------------------------------------------------------- zx_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: <stdin>:1325:2: warning: #warning syscall statx not implemented [-Wcpp] --- For more info write to <info(a)kernelci.org>

7 years, 9 months

← Newer
1
...
17
18
19
20
21
22
23
...
43
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports March 2017