Kernel-build-reports

kernel-build-reports@lists.linaro.org

1 participants
104801 discussions

linus/master boot: 27 pass, 2 fail (v3.12-rc2-160-g669fc2f)

by Kevin Hilman build bot

Automated DT boot report for various ARM defconfigs. Boot test simply checks if kernel can boot to initramfs with busybox and run some basic commands (e.g. 'cat /proc/cpuinfo'). Tree/Branch: linus/master Git describe: v3.12-rc2-160-g669fc2f Commit: 669fc2f0c7 Merge branches 'sched-urgent-for-linus', 'timers-urgent-for-linus' and 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Failed boot tests (console logs at the end) =========================================== tegra30-beaver: FAIL: arm-tegra_defconfig tegra30-beaver: FAIL: arm-multi_v7_defconfig Full Report =========== arm-tegra_defconfig ------------------- tegra30-beaver FAIL: 0 min 46.3 sec arm-omap2plus_defconfig ----------------------- am335x-boneblack PASS: 0 min 30.3 sec omap3-beagle-xm PASS: 0 min 52.5 sec am335x-bone PASS: 0 min 26.3 sec omap3-tobi,3530overo PASS: 0 min 42.5 sec omap4-panda PASS: 1 min 5.4 sec omap4-panda-es PASS: 1 min 8.1 sec omap3-tobi,3730storm PASS: 0 min 41.2 sec omap3-beagle PASS: 0 min 56.5 sec arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.4 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.5 sec imx6q-wandboard PASS: 0 min 15.0 sec arm-multi_v7_defconfig ---------------------- tegra30-beaver FAIL: 0 min 43.3 sec am335x-boneblack PASS: 0 min 34.6 sec omap3-beagle-xm PASS: 0 min 54.8 sec armada-370-mirabox PASS: 0 min 19.4 sec omap4-panda PASS: 1 min 2.9 sec omap4-panda-es PASS: 1 min 8.1 sec sun4i-a10-cubieboard PASS: 0 min 11.6 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.4 sec omap3-tobi,3530overo PASS: 0 min 40.8 sec am335x-bone PASS: 0 min 33.4 sec imx6q-wandboard PASS: 0 min 15.7 sec omap3-tobi,3730storm PASS: 0 min 40.5 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.6 sec omap3-beagle PASS: 1 min 19.7 sec arm-exynos_defconfig -------------------- exynos5250-arndale PASS: 0 min 29.9 sec arm-mvebu_defconfig ------------------- armada-370-mirabox PASS: 0 min 19.3 sec arm-sama5_defconfig ------------------- sama5d35ek PASS: 0 min 18.7 sec Console logs for failures ========================= arm-tegra_defconfig ------------------- tegra30-beaver: FAIL: last 24 lines of boot log: ------------------------------------------------ [ 3.644351] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.663573] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.670086] hub 1-0:1.0: USB hub found [ 3.673868] hub 1-0:1.0: 1 port detected [ 3.678619] tegra_rtc 7000e000.rtc: setting system clock to 1970-01-01 00:00:12 UTC (12) [ 3.686957] ALSA device list: [ 3.689915] #0: NVIDIA Tegra Beaver [ 3.693922] Freeing unused kernel memory: 232K (c0742000 - c077c000) Starting logging: OK Initializing random number generator... done. Starting network... /bin/sh: can't access tty; job control turned off / # cat /proc/cmdline cat /proc/cmdline console=ttyS0,115200n8 debug earlyprintk / # uname -r uname -r 3.12.0-rc2-00160-g669fc2f / # [ 3.993623] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.485546] asix 1-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, b8:8d:12:55:d1:b9 ~$off # PYBOOT: Exception: ERROR: Timeout waiting for command: uname -r. # PYBOOT: Time: 46.32 seconds. # PYBOOT: Result: FAIL arm-multi_v7_defconfig ---------------------- tegra30-beaver: FAIL: last 24 lines of boot log: ------------------------------------------------ [ 1.664767] mmcblk1boot1: unknown partition table [ 1.672172] mmcblk1boot0: unknown partition table [ 1.677260] platform 1.regulator: Driver reg-fixed-voltage requests probe deferral [ 1.685124] platform 2.regulator: Driver reg-fixed-voltage requests probe deferral [ 1.692823] platform 6.regulator: Driver reg-fixed-voltage requests probe deferral [ 1.700618] sys_3v3_pexs: 3300 mV [ 1.704076] reg-fixed-voltage 7.regulator: Failed to find supply vin [ 1.710464] reg-fixed-voltage 7.regulator: Failed to register regulator: -517 [ 1.717600] platform 7.regulator: Driver reg-fixed-voltage requests probe deferral [ 1.725389] tegra-hdmi 54280000.hdmi: failed to get VDD regulator [ 1.731473] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 1.821567] platform 1.regulator: Driver reg-fixed-voltage requests probe deferral [ 1.829302] platform 2.regulator: Driver reg-fixed-voltage requests probe deferral [ 1.837009] platform 6.regulator: Driver reg-fixed-voltage requests probe deferral [ 1.844765] sys_3v3_pexs: 3300 mV [ 1.848175] reg-fixed-voltage 7.regulator: Failed to find supply vin [ 1.854570] reg-fixed-voltage 7.regulator: Failed to register regulator: -517 [ 1.861693] platform 7.regulator: Driver reg-fixed-voltage requests probe deferral [ 1.869456] tegra-hdmi 54280000.hdmi: failed to get VDD regulator [ 1.875553] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: ERROR: Timeout waiting for command: cat /proc/cmdline. # PYBOOT: Time: 43.33 seconds. # PYBOOT: Result: FAIL

10 years, 8 months

mainline boot: 14 passed 0 failed (mainline/v3.12-rc2-160-g669fc2f)

by Olof's autobooter

arndale : passed 1:05.30 bbb : passed 2:01.10 beaver : passed 0:59.24 multi-beaver : passed 0:37.12 cubie2 : passed 1:05.16 cubie : passed 0:56.84 cubox : passed 0:47.59 panda : passed 0:58.81 multi-panda : passed 1:03.68 sama5 : passed 1:42.48 snowball : passed 1:18.57 multi-snowball : passed 0:43.65 multi-trimslice : passed 0:38.25 wandboard : passed 1:08.29 Board legend: Board : System SoC Defconfig arndale : InSignal ArndaleBoard Samsung Exynos 5250 exynos_defconfig bbb : BeagleBone Black TI Sitara AM3359 omap2plus_defconfig beaver : Nvidia Beaver Nvidia Tegra 30 tegra_defconfig multi-beaver : multi_v7_defconfig cubie : Cubieboard Allwinner A10 multi_v7_defconfig cubie2 : Cubieboard 2 Allwinner A20 multi_v7_defconfig cubox : SolidRun Cubox Marvell 88AP510 dove_defconfig multi-trimslice : CompuLab TrimSlice Nvidia Tegra 20 multi_v7_defconfig panda : TI PandaBoard ES TI OMAP4460 omap2plus_defconfig multi-panda : multi_v7_defconfig sama5 : Atmel SAMA5 devboard Atmel SAMA5D35 sama5_defconfig snowball : CALAO Snowball ST-Ericsson A9500 u8500_defconfig multi-snowball : multi_v7_defconfig wandboard : Wandboard Freescale i.MX6 Quad imx_v6_v7_defconfig

10 years, 8 months

mainline build: 15 warnings 0 failures (mainline/v3.12-rc2-160-g669fc2f)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 669fc2f Merge branches 'sched-urgent-for-linus', 'timers-urgent-for-linus' and 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.12-rc2-160-g669fc2f/ Runtime: 34m 13s Passed: 117 Failed: 0 Warnings: 15 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/dma/imx-dma.c:579:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:579:3: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:593:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:603:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:930:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:930:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:960:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:960:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1092:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1166:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/cdma_hw.c:57:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/debug_hw.c:175:10: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' [-Wformat=] 1 drivers/tty/serial/imx.c:1542:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] Section mismatches:

10 years, 8 months

mainline boot: 10 passed 3 failed (mainline/v3.12-rc2)

by Olof's autobooter

arndale : passed 0:50.79 bbb : passed 2:00.82 beaver : FAILED 0:43.99 multi-beaver : FAILED 0:42.36 cubie : passed 1:08.25 cubie2 : passed 1:08.94 cubox : FAILED 0:52.20 panda : passed 0:59.49 multi-panda : passed 0:49.27 sama5 : passed 1:52.51 snowball : passed 1:19.93 multi-snowball : passed 0:38.27 multi-trimslice : passed 0:40.25 Board legend: Board : System SoC Defconfig arndale : InSignal ArndaleBoard Samsung Exynos 5250 exynos_defconfig bbb : BeagleBone Black TI Sitara AM3359 omap2plus_defconfig beaver : Nvidia Beaver Nvidia Tegra 30 tegra_defconfig multi-beaver : multi_v7_defconfig cubie : Cubieboard Allwinner A10 multi_v7_defconfig cubie2 : Cubieboard 2 Allwinner A20 multi_v7_defconfig cubox : SolidRun Cubox Marvell 88AP510 dove_defconfig multi-trimslice : CompuLab TrimSlice Nvidia Tegra 20 multi_v7_defconfig panda : TI PandaBoard ES TI OMAP4460 omap2plus_defconfig multi-panda : multi_v7_defconfig sama5 : Atmel SAMA5 devboard Atmel SAMA5D35 sama5_defconfig snowball : CALAO Snowball ST-Ericsson A9500 u8500_defconfig multi-snowball : multi_v7_defconfig Last entries of failed logs below: ======================================================================== Board beaver failure log: ------------------------------------------------- board_name=beaver boot_prefixes=/ /boot/ boot_scripts=boot.scr.uimg boot.scr boot_targets=mmc1 mmc0 usb0 dhcp bootargs=console=ttyS0,115200 earlyprintk debug root=/dev/mmcblk0p1 rootwait bootcmd=for target in ${boot_targets}; do run bootcmd_${target}; done bootcmd_dhcp=run usb_init; if dhcp ${scriptaddr} boot.scr.uimg; then source ${scriptaddr}; fi bootcmd_mmc0=setenv devnum 0; run mmc_boot; bootcmd_mmc1=setenv devnum 1; run mmc_boot; bootcmd_usb0=setenv devnum 0; run usb_boot; bootdelay=2 bootfile=mainline/v3.12-rc2/uImage.tegra30 cpu=armv7 fdt_addr_r=0x82000000 initrd_high=0xffffffff kernel_addr_r=0x81000000 loadaddr=0x80408000 mmc_boot=setenv devtype mmc; if mmc dev ${devnum}; then run scan_boot; fi ramdisk_addr_r=0x82100000 rootpart=1 scan_boot=echo Scanning ${devtype} ${devnum}...; for prefix in ${boot_prefixes}; do for script in ${boot_scripts}; do run script_boot; done; done; script_boot=if load ${devtype} ${devnum}:${rootpart} ${scriptaddr} ${prefix}${script}; then echo ${script} found! Executing ...;source ${scriptaddr};fi; scriptaddr=0x90000000 soc=tegra30 stderr=serial stdin=serial stdout=serial usb_boot=setenv devtype usb; run usb_init; if usb dev ${devnum}; then run scan_boot; fi usb_init=if ${usb_need_init}; then set usb_need_init false; usb start 0; fi vendor=nvidia Environment size: 1436/8188 bytes Tegra30 (Beaver) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 earlyprintk debug root=/dev/mmcblk0p1 rootwait Tegra30 (Beaver) # tftpboot 0x82000000 172.16.1.4:/srv/tftp/mainline/v3.12-rc2/uImage.tegra30 tftpboot 0x82000000 172.16.1.4:/srv/tftp/mainline/v3.12-rc2/uImage.tegra30 No ethernet found. Tegra30 (Beaver) # (user:olof) connected ~$off ======================================================================== Board cubox failure log: ------------------------------------------------- stderr=serial passDramInitTag=yes mainlineLinux=yes enaMonExt=no pexMode=RC disL2Cache=no disL2Ecc=no sata_dma_mode=yes netbsd_en=no vxworks_en=no bootscript=boot.scr loadaddr=0x02000000 mmc_started=0 ide_started=0 usb_started=0 trydev=usb mmc ide trypart=1 2 trydir=/ /boot/ tryfs=ext4 fat bootcmd=for device_name in ${trydev} ; do for partition in ${trypart} ; do for directory in ${trydir} ;do for fstype in ${tryfs}; do echo ===> Executing ${fstype}load ${device_name} 0:${partition} ${loadaddr} ${directory}${bootscript};if itest.s $device_name -eq mmc; then if itest.s $mmc_started -ne 1; then mmcinfo; setenv mmc_started '1';fi;fi;if itest.s $device_name -eq usb; then if itest.s $usb_started -ne 1; then usb start; setenv usb_started '1';fi;fi;if itest.s $device_name -eq ide; then if itest.s $ide_started -ne 1; then ide reset; setenv ide_started '1';fi;fi;if ${fstype}load ${device_name} 0:${partition} ${loadaddr} ${directory}${bootscript}; then source ${loadaddr};fi;if itest.s $device_name -eq usb; then echo ===> Executing ${fstype}load ${device_name} 1:${partition} ${loadaddr} ${directory}${bootscript};if ${fstype}load ${device_name} 1:${partition} ${loadaddr} ${directory}${bootscript}; then source ${loadaddr};fi;fi;done;done;done;done;tftp ${loadaddr} ${bootscript};source ${loadaddr}; enaL2ExtraFeatures=yes enaCpuStream=no enaVpuPower=no enaGpuPower=yes autoload=no bootfile=mainline/v3.12-rc2/uImage.cubox autoboot=no Environment size: 3949/65532 bytes CuBox>> printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/mmcblk0p2 rootwait CuBox>> tftpboot 0x2000000 172.16.1.4:/srv/tftp/mainline/v3.12-rc2/uImage.cubox tftpboot 0x2000000 172.16.1.4:/srv/tftp/mainline/v3.12-rc2/uImage.cubox egiga0 no link Using egiga0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.183 Filename '/srv/tftp/mainline/v3.12-rc2/uImage.cubox'. Load address: 0x2000000 Loading: *T T T T T ~$off ======================================================================== Board multi-beaver failure log: ------------------------------------------------- board=beaver board_name=beaver boot_prefixes=/ /boot/ boot_scripts=boot.scr.uimg boot.scr boot_targets=mmc1 mmc0 usb0 dhcp bootargs=console=ttyS0,115200 earlyprintk debug root=/dev/mmcblk0p1 rootwait bootcmd=for target in ${boot_targets}; do run bootcmd_${target}; done bootcmd_dhcp=run usb_init; if dhcp ${scriptaddr} boot.scr.uimg; then source ${scriptaddr}; fi bootcmd_mmc0=setenv devnum 0; run mmc_boot; bootcmd_mmc1=setenv devnum 1; run mmc_boot; bootcmd_usb0=setenv devnum 0; run usb_boot; bootdelay=2 bootfile=mainline/v3.12-rc2/uImage.multi-2g cpu=armv7 fdt_addr_r=0x82000000 initrd_high=0xffffffff kernel_addr_r=0x81000000 loadaddr=0x80408000 mmc_boot=setenv devtype mmc; if mmc dev ${devnum}; then run scan_boot; fi ramdisk_addr_r=0x82100000 rootpart=1 scan_boot=echo Scanning ${devtype} ${devnum}...; for prefix in ${boot_prefixes}; do for script in ${boot_scripts}; do run script_boot; done; done; script_boot=if load ${devtype} ${devnum}:${rootpart} ${scriptaddr} ${prefix}${script}; then echo ${script} found! Executing ...;source ${scriptaddr};fi; scriptaddr=0x90000000 soc=tegra30 stderr=serial stdin=serial stdout=serial usb_boot=setenv devtype usb; run usb_init; if usb dev ${devnum}; then run scan_boot; fi usb_init=if ${usb_need_init}; then set usb_need_init false; usb start 0; fi vendor=nvidia Environment size: 1437/8188 bytes Tegra30 (Beaver) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 earlyprintk debug root=/dev/mmcblk0p1 rootwait Tegra30 (Beaver) # tftpboot 0x82000000 172.16.1.4:/srv/tftp/mainline/v3.12-rc2/uImage.multi-2g tftpboot 0x82000000 172.16.1.4:/srv/tftp/mainline/v3.12-rc2/uImage.multi-2g No ethernet found. Tegra30 (Beaver) # ~$off

10 years, 8 months

linus/master boot: 26 pass, 3 fail (v3.12-rc2-108-g6cac446)

by Kevin Hilman build bot

Automated DT boot report for various ARM defconfigs. Boot test simply checks if kernel can boot to initramfs with busybox and run some basic commands (e.g. 'cat /proc/cpuinfo'). Tree/Branch: linus/master Git describe: v3.12-rc2-108-g6cac446 Commit: 6cac446bd3 Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Failed boot tests (console logs at the end) =========================================== tegra30-beaver: FAIL: arm-tegra_defconfig omap3-beagle: FAIL: arm-multi_v7_defconfig armada-370-mirabox: FAIL: arm-mvebu_defconfig Full Report =========== arm-tegra_defconfig ------------------- tegra30-beaver FAIL: 0 min 46.3 sec arm-omap2plus_defconfig ----------------------- am335x-boneblack PASS: 0 min 30.5 sec omap3-beagle-xm PASS: 0 min 51.5 sec am335x-bone PASS: 0 min 26.3 sec omap3-tobi,3530overo PASS: 0 min 42.4 sec omap4-panda PASS: 1 min 5.5 sec omap4-panda-es PASS: 1 min 14.0 sec omap3-tobi,3730storm PASS: 0 min 41.4 sec omap3-beagle PASS: 0 min 49.3 sec arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.5 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.2 sec imx6q-wandboard PASS: 0 min 15.0 sec arm-multi_v7_defconfig ---------------------- tegra30-beaver PASS: 0 min 15.1 sec am335x-boneblack PASS: 0 min 34.6 sec omap3-beagle-xm PASS: 0 min 51.7 sec armada-370-mirabox PASS: 0 min 19.4 sec omap4-panda PASS: 1 min 1.0 sec omap4-panda-es PASS: 1 min 6.2 sec sun4i-a10-cubieboard PASS: 0 min 11.6 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.4 sec omap3-tobi,3530overo PASS: 0 min 44.0 sec am335x-bone PASS: 0 min 38.4 sec imx6q-wandboard PASS: 0 min 15.7 sec omap3-tobi,3730storm PASS: 0 min 39.8 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.7 sec omap3-beagle FAIL: 1 min 47.0 sec arm-exynos_defconfig -------------------- exynos5250-arndale PASS: 0 min 39.6 sec arm-mvebu_defconfig ------------------- armada-370-mirabox FAIL: 0 min 21.1 sec arm-sama5_defconfig ------------------- sama5d35ek PASS: 0 min 18.4 sec Console logs for failures ========================= arm-tegra_defconfig ------------------- tegra30-beaver: FAIL: last 24 lines of boot log: ------------------------------------------------ [ 3.637500] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.653508] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.660018] hub 1-0:1.0: USB hub found [ 3.663800] hub 1-0:1.0: 1 port detected [ 3.668561] tegra_rtc 7000e000.rtc: setting system clock to 1970-01-01 00:00:12 UTC (12) [ 3.676899] ALSA device list: [ 3.679857] #0: NVIDIA Tegra Beaver [ 3.683859] Freeing unused kernel memory: 232K (c0742000 - c077c000) Starting logging: OK Initializing random number generator... done. Starting network... /bin/sh: can't access tty; job control turned off / # cat /proc/cmdline cat /proc/cmdline console=ttyS0,115200n8 debug earlyprintk / # uname -r uname -r 3.12.0-rc2-00108-g6cac446 / # [ 3.983585] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.475446] asix 1-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, b8:8d:12:55:d1:b9 ~$off # PYBOOT: Exception: ERROR: Timeout waiting for command: uname -r. # PYBOOT: Time: 46.31 seconds. # PYBOOT: Result: FAIL arm-multi_v7_defconfig ---------------------- omap3-beagle: FAIL: last 24 lines of boot log: ---------------------------------------------- Waiting for Ethernet connection... done. Using asx0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'tmp/3530beagle-o80l_u/zImage'. Load address: 0x80200000 Loading: *T ########T T T T Abort OMAP3 beagleboard.org # tftp 0x80200000 tmp/3530beagle-o80l_u/zImage tftp 0x80200000 tmp/3530beagle-o80l_u/zImage EHCI timed out on TD - token=0x80008c80 EHCI timed out on TD - token=0x80008d80 ERROR: Need valid 'usbnet_devaddr' to be set at ether.c:2369/usb_eth_init() OMAP3 beagleboard.org # tftp 0x80200000 tmp/3530beagle-o80l_u/zImage <INTERRUPT> OMAP3 beagleboard.org # tftp 0x80200000 tmp/3530beagle-o80l_u/zImage EHCI timed out on TD - token=0x80008c80 EHCI timed out on TD - token=0x80008d80 ERROR: Need valid 'usbnet_devaddr' to be set at ether.c:2369/usb_eth_init() OMAP3 beagleboard.org # ~$off # PYBOOT: Exception: ERROR: Timeout loading tmp/3530beagle-o80l_u/zImage. Giving up. # PYBOOT: Time: 106.97 seconds. # PYBOOT: Result: FAIL arm-mvebu_defconfig ------------------- armada-370-mirabox: FAIL: last 24 lines of boot log: ---------------------------------------------------- Image Name: Linux Created: 2013-09-27 20:26:52 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2655641 Bytes = 2.5 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 kB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 21.12 seconds. # PYBOOT: Result: FAIL

10 years, 8 months

mainline boot: 13 passed 0 failed (mainline/v3.12-rc2-108-g6cac446)

by Olof's autobooter

arndale : passed 0:51.45 bbb : passed 1:56.99 beaver : passed 1:48.80 multi-beaver : passed 0:28.66 cubie : passed 0:59.29 cubie2 : passed 1:06.81 cubox : passed 0:50.86 panda : passed 0:52.95 multi-panda : passed 0:49.51 sama5 : passed 1:41.79 snowball : passed 1:14.89 multi-snowball : passed 0:39.08 multi-trimslice : passed 0:33.14 Board legend: Board : System SoC Defconfig arndale : InSignal ArndaleBoard Samsung Exynos 5250 exynos_defconfig bbb : BeagleBone Black TI Sitara AM3359 omap2plus_defconfig beaver : Nvidia Beaver Nvidia Tegra 30 tegra_defconfig multi-beaver : multi_v7_defconfig cubie : Cubieboard Allwinner A10 multi_v7_defconfig cubie2 : Cubieboard 2 Allwinner A20 multi_v7_defconfig cubox : SolidRun Cubox Marvell 88AP510 dove_defconfig multi-trimslice : CompuLab TrimSlice Nvidia Tegra 20 multi_v7_defconfig panda : TI PandaBoard ES TI OMAP4460 omap2plus_defconfig multi-panda : multi_v7_defconfig sama5 : Atmel SAMA5 devboard Atmel SAMA5D35 sama5_defconfig snowball : CALAO Snowball ST-Ericsson A9500 u8500_defconfig multi-snowball : multi_v7_defconfig

10 years, 8 months

mainline build: 15 warnings 0 failures (mainline/v3.12-rc2-108-g6cac446)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 6cac446 Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.12-rc2-108-g6cac446/ Runtime: 6m 56s Passed: 117 Failed: 0 Warnings: 15 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/dma/imx-dma.c:579:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:579:3: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:593:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:603:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:930:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:930:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:960:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:960:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1092:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1166:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/cdma_hw.c:57:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/debug_hw.c:175:10: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' [-Wformat=] 1 drivers/tty/serial/imx.c:1542:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] Section mismatches:

10 years, 8 months

next boot: 12 passed 1 failed (next/next-20130927)

by Olof's autobooter

arndale : passed 0:51.54 bbb : passed 1:54.06 beaver : passed 1:46.93 multi-beaver : passed 0:28.74 cubie : passed 0:53.69 cubie2 : passed 1:08.99 cubox : passed 0:49.42 panda : passed 0:53.08 multi-panda : passed 0:48.71 sama5 : FAILED 0:16.60 snowball : passed 1:16.80 multi-snowball : passed 0:38.10 multi-trimslice : passed 0:37.15 Board legend: Board : System SoC Defconfig arndale : InSignal ArndaleBoard Samsung Exynos 5250 exynos_defconfig bbb : BeagleBone Black TI Sitara AM3359 omap2plus_defconfig beaver : Nvidia Beaver Nvidia Tegra 30 tegra_defconfig multi-beaver : multi_v7_defconfig cubie : Cubieboard Allwinner A10 multi_v7_defconfig cubie2 : Cubieboard 2 Allwinner A20 multi_v7_defconfig cubox : SolidRun Cubox Marvell 88AP510 dove_defconfig multi-trimslice : CompuLab TrimSlice Nvidia Tegra 20 multi_v7_defconfig panda : TI PandaBoard ES TI OMAP4460 omap2plus_defconfig multi-panda : multi_v7_defconfig sama5 : Atmel SAMA5 devboard Atmel SAMA5D35 sama5_defconfig snowball : CALAO Snowball ST-Ericsson A9500 u8500_defconfig multi-snowball : multi_v7_defconfig Last entries of failed logs below: ======================================================================== Board sama5 failure log: ------------------------------------------------- ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-atmel: OHCI Atmel driver Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 3.12.0-rc2-next-20130927 #97 task: df853c00 ti: df854000 task.ti: df854000 PC is at ohci_init_driver+0xd8/0xfc LR is at ohci_init_driver+0x18/0xfc pc : [<c0268374>] lr : [<c02682b4>] psr: 40000113 sp : df855ec0 ip : c05426c0 fp : 00000000 r10: df854028 r9 : 0000007d r8 : c0527018 r7 : c056eb80 r6 : c056eb80 r5 : 00000000 r4 : c0542618 r3 : c026a91c r2 : c0269c3c r1 : 00000011 r0 : c0542618 Flags: nZcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 20004059 DAC: 00000015 Process swapper (pid: 1, stack limit = 0xdf854238) Stack: (0xdf855ec0 to 0xdf856000) 5ec0: 00000000 00000000 c0542618 c0527050 df854000 c05388c8 00000006 c056eb80 5ee0: c056eb80 c00087b0 df83d2c0 c00cffbc df8048c0 c0485128 df83d200 c03daf90 5f00: 00000010 0000eb80 00001480 00000001 df83d3c0 60000153 c09971b2 c03ef8c8 5f20: 0000007d c0031074 c04eda70 00000006 c09971b4 00000006 00000000 c05388c8 5f40: 00000006 c056eb80 c056eb80 c0511480 0000007d c0533058 c053304c c0511b24 5f60: 00000006 00000006 c0511480 fd6bdbff 6fbf77ff dd77fbc7 ffffabfb 00000000 5f80: c03d0600 00000000 00000000 00000000 00000000 00000000 00000000 c03d0608 5fa0: 00000000 00000000 c03d0600 c000e178 00000000 00000000 00000000 00000000 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 ebbaeffb bdff7fff [<c0268374>] (ohci_init_driver+0xd8/0xfc) from [<c0527050>] (ohci_at91_init+0x38/0x84) [<c0527050>] (ohci_at91_init+0x38/0x84) from [<c00087b0>] (do_one_initcall+0x100/0x14c) [<c00087b0>] (do_one_initcall+0x100/0x14c) from [<c0511b24>] (kernel_init_freeable+0x120/0x1c0) [<c0511b24>] (kernel_init_freeable+0x120/0x1c0) from [<c03d0608>] (kernel_init+0x8/0x158) [<c03d0608>] (kernel_init+0x8/0x158) from [<c000e178>] (ret_from_fork+0x14/0x3c) Code: e30a391c e5842050 e34c3026 e5843054 (e5953000) ---[ end trace e1a4405e8b645019 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ~$off

10 years, 8 months

next build: 17 warnings 0 failures (next/next-20130927)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next, found at: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch) Topmost commit: a0cf1ab Add linux-next specific files for 20130927 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next/next-20130927/ Runtime: 40m 20s Passed: 117 Failed: 0 Warnings: 17 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/dma/imx-dma.c:579:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:579:3: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:593:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:603:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:930:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:930:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:960:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:960:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1092:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1166:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/cdma_hw.c:57:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/debug_hw.c:175:10: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' [-Wformat=] 1 fs/nfs/fscache.c:263:21: warning: unused variable 'nfsi' [-Wunused-variable] 1 fs/nfs/fscache.c:286:20: warning: unused variable 'nfsi' [-Wunused-variable] 2 sound/soc/fsl/imx-sgtl5000.c:185:12: warning: 'imx_sgtl5000_remove' defined but not used [-Wunused-function] Section mismatches:

10 years, 8 months

queue boot: 6 passed 7 failed (queue/v3.10.13)

by Olof's autobooter

arndale : passed 0:48.52 bbb : FAILED 1:14.58 beaver : passed 0:35.43 multi-beaver : FAILED 0:42.35 cubie : FAILED 0:12.91 cubie2 : FAILED 0:53.33 cubox : passed 0:51.88 panda : passed 0:56.27 multi-panda : FAILED 0:47.08 sama5 : passed 1:46.12 snowball : passed 0:57.60 multi-snowball : FAILED 0:44.00 multi-trimslice : FAILED 0:44.38 Board legend: Board : System SoC Defconfig arndale : InSignal ArndaleBoard Samsung Exynos 5250 exynos_defconfig bbb : BeagleBone Black TI Sitara AM3359 omap2plus_defconfig beaver : Nvidia Beaver Nvidia Tegra 30 tegra_defconfig multi-beaver : multi_v7_defconfig cubie : Cubieboard Allwinner A10 multi_v7_defconfig cubie2 : Cubieboard 2 Allwinner A20 multi_v7_defconfig cubox : SolidRun Cubox Marvell 88AP510 dove_defconfig multi-trimslice : CompuLab TrimSlice Nvidia Tegra 20 multi_v7_defconfig panda : TI PandaBoard ES TI OMAP4460 omap2plus_defconfig multi-panda : multi_v7_defconfig sama5 : Atmel SAMA5 devboard Atmel SAMA5D35 sama5_defconfig snowball : CALAO Snowball ST-Ericsson A9500 u8500_defconfig multi-snowball : multi_v7_defconfig Last entries of failed logs below: ======================================================================== Board bbb failure log: ------------------------------------------------- Environment size: 4191/131068 bytes U-Boot# setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp' setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp' U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp U-Boot# tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.10.13/uImage.omap tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.10.13/uImage.omap link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.4; our IP address is 172.16.1.123 Filename '/srv/tftp/queue/v3.10.13/uImage.omap'. Load address: 0x80000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ##### 625 KiB/s done Bytes transferred = 4017280 (3d4c80 hex) U-Boot# tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.13/am335x-boneblack.dtb tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.13/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.4; our IP address is 172.16.1.123 Filename '/srv/tftp/queue/v3.10.13/am335x-boneblack.dtb'. Load address: 0x81000000 Loading: * TFTP error: 'File not found' (1) Not retrying... U-Boot# ~$off ======================================================================== Board cubie failure log: ------------------------------------------------- io scheduler deadline registered io scheduler cfq registered (default) sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver ipmi message hanode: cubie status: on ndler version 39.2 IPMI System Interface driver. ipmi_si: Adding default-specified kcs state machine ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca2-0000000000000ca2> Trying to free nonexistent resource <0000000000000ca3-0000000000000ca3> ipmi_si: Adding default-specified smic state machine ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca9-0000000000000ca9> Trying to free nonexistent resource <0000000000000caa-0000000000000caa> Trying to free nonexistent resource <0000000000000cab-0000000000000cab> ipmi_si: Adding default-specified bt state machine ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <00000000000000e4-00000000000000e4> Trying to free nonexistent resource <00000000000000e5-00000000000000e5> Trying to free nonexistent resource <00000000000000e6-00000000000000e6> ipmi_si: Unable to find any System Interface(s) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 17) is a U6_16550A console [ttyS0] enabled usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 Registering SWP/SWPB emulation handler ../../drivers/rtc/hctosys.c: unable to open rtc device (rtc0) List of all partitions: No filesystem could mount root, tried: Kernel panic - not syncing: VFS: Unable to mount r~$off ======================================================================== Board cubie2 failure log: ------------------------------------------------- netmask=255.255.255.0 panicarg=panic=10 partition=0:1 scriptaddr=0x44000000 serverip=172.16.1.4 setargs=if test -z \\"$root\\"; then if test \\"$bootpath\\" = "boot/"; then root="/dev/mmcblk0p1 rootwait"; else root="/dev/mmcblk0p2 rootwait"; fi; fi; setenv bootargs console=${console} root=${root} loglevel=${loglevel} ${panicarg} ${extraargs} stderr=serial stdin=serial stdout=serial Environment size: 2087/131068 bytes sun7i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i#tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.10.13/uImage.multi-1g tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.10.13/uImage.multi-1g Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.169 Filename '/srv/tftp/queue/v3.10.13/uImage.multi-1g'. Load address: 0x41000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 1.7 MiB/s done Bytes transferred = 1820664 (1bc7f8 hex) sun7i#tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.10.13/sun7i-a20-cubieboard2.dtb tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.10.13/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.169 Filename '/srv/tftp/queue/v3.10.13/sun7i-a20-cubieboard2.dtb'. Load address: 0x42000000 Loading: * TFTP error: 'File not found' (1) Not retrying... sun7i#node: cubie2 status: on ~$off ======================================================================== Board multi-beaver failure log: ------------------------------------------------- Using asx0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.111 Filename '/srv/tftp/queue/v3.10.13/uImage.multi-2g'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 1.9 MiB/s done Bytes transferred = 1820664 (1bc7f8 hex) Tegra30 (Beaver) # tftpboot 0x83000000 172.16.1.4:/srv/tftp/queue/v3.10.13/tegra30-beaver.dtb tftpboot 0x83000000 172.16.1.4:/srv/tftp/queue/v3.10.13/tegra30-beaver.dtb Using asx0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.111 Filename '/srv/tftp/queue/v3.10.13/tegra30-beaver.dtb'. Load address: 0x83000000 Loading: *#### 1.3 MiB/s done Bytes transferred = 16546 (40a2 hex) Tegra30 (Beaver) # bootm 0x82000000 - 0x83000000 bootm 0x82000000 - 0x83000000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1820600 Bytes = 1.7 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Kernel Image ... OK Loading Device Tree to 8fff8000, end 8ffff0a1 ... OK Starting kernel ... ~$off ======================================================================== Board multi-panda failure log: ------------------------------------------------- TFTP from server 172.16.1.4; our IP address is 172.16.1.182 Filename '/srv/tftp/queue/v3.10.13/uImage.multi-2g'. Load address: 0x80000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### done Bytes transferred = 1820664 (1bc7f8 hex) Panda # tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.13/omap4-panda-es.dtb tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.13/omap4-panda-es.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.182 Filename '/srv/tftp/queue/v3.10.13/omap4-panda-es.dtb'. Load address: 0x81000000 Loading: *#### done Bytes transferred = 17271 (4377 hex) Panda # bootm 0x80000000 - 0x81000000 bootm 0x80000000 - 0x81000000 ## Booting kernel from Legacy Image at 80000000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1820600 Bytes = 1.7 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 81000000 Booting using the fdt blob at 0x81000000 Loading Kernel Image ... OK OK reserving fdt memory region: addr=9d000000 size=3000000 Using Device Tree in place at 81000000, end 81007376 Starting kernel ... ~$off ======================================================================== Board multi-snowball failure log: ------------------------------------------------- ipaddr=172.16.1.137 serverip=172.16.1.7 bootfile=queue/v3.10.13/uImage.multi-snowball autoboot=no Environment size: 1694/4092 bytes U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.10.13/uImage.multi-snowball tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.10.13/uImage.multi-snowball smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.137 Filename '/srv/tftp/queue/v3.10.13/uImage.multi-snowball'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### done Bytes transferred = 1820664 (1bc7f8 hex) U8500 $ bootm 0x100000 bootm 0x100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1820600 Bytes = 1.7 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off ======================================================================== Board multi-trimslice failure log: ------------------------------------------------- *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.150 TrimSlice # setenv bootfile queue/v3.10.13/uImage.multi-trimslice setenv bootfile queue/v3.10.13/uImage.multi-trimslice TrimSlice # setenv autoboot no setenv autoboot no TrimSlice # printenv printenv bootdelay=5 baudrate=115200 loadaddr=0x408000 stdin=serial,usbkbd stdout=serial,lcd stderr=serial,lcd console=ttyS0,115200n8 ethact=RTL8169#0 gateway=172.16.1.1 bootcmd=none bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw autoload=no netmask=255.255.255.0 ipaddr=172.16.1.150 serverip=172.16.1.7 bootfile=queue/v3.10.13/uImage.multi-trimslice autoboot=no Environment size: 364/65532 bytes TrimSlice # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw TrimSlice # tftpboot 0x800000 172.16.1.4:/srv/tftp/queue/v3.10.13/uImage.multi-trimslice tftpboot 0x800000 172.16.1.4:/srv/tftp/queue/v3.10.13/uImage.multi-trimslice Using RTL8169#0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.150 Filename '/srv/tftp/queue/v3.10.13/uImage.multi-trimslice'. Load address: 0x800000 Loading: * TFTP error: 'File not found' (1) Not retrying... TrimSlice # ~$off

10 years, 8 months

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports