Kernel-build-reports

kernel-build-reports@lists.linaro.org

107303 discussions

next-thierry build: 19 warnings 0 failures (next-thierry/v3.12-rc4-4487-g0bcf667)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next-thierry, found at: Topmost commit: 0bcf667 Add linux-next specific files for 20131009 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next-thierry/v3.12-rc4-4487-g0bcf667/ Runtime: 40m 43s Passed: 118 Failed: 0 Warnings: 19 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 arch/arm/include/asm/irq.h:9:0: warning: "NR_IRQS" redefined [enabled by default] 1 drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:589:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:599:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1092:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1166:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/cdma_hw.c:57:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/debug_hw.c:175:10: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' [-Wformat=] 2 arch/arm/mach-s3c24xx/common.c:337:24: warning: 's3c2410_dma_resource' defined but not used [-Wunused-variable] 2 net/netfilter/ipvs/ip_vs_sync.c:1640:8: warning: unused variable 'ret' [-Wunused-variable] 3 arch/arm/mach-imx/clk-imx51-imx53.c:579:2: warning: 'return' with a value, in function returning void [enabled by default] 5 net/core/secure_seq.c:17:13: warning: 'net_secret_init' defined but not used [-Wunused-function] Section mismatches:

11 years, 2 months

queue boot: 6 passed 10 failed (queue/v3.10.15-66-g129bd6c)

by Olof's autobooter

arndale : passed 0:48.53 bbb : FAILED 1:21.74 beaver : passed 0:39.13 multi-beaver : FAILED 0:57.19 cubie2 : FAILED 0:51.20 cubie : FAILED 0:20.56 cubox : passed 0:48.17 overo : passed 3:17.41 panda : passed 0:56.26 multi-panda : FAILED 0:53.84 sama5 : passed 1:36.17 snowball : FAILED 1:32.22 multi-snowball : FAILED 0:43.48 multi-trimslice : FAILED 0:46.07 wandboard : FAILED 0:56.16 multi-wandboard : FAILED 0:45.65 Board legend: Board : System SoC Defconfig arndale : InSignal ArndaleBoard Samsung Exynos 5250 exynos_defconfig bbb : BeagleBone Black TI Sitara AM3359 omap2plus_defconfig beaver : Nvidia Beaver Nvidia Tegra 30 tegra_defconfig multi-beaver : multi_v7_defconfig cubie : Cubieboard Allwinner A10 multi_v7_defconfig cubie2 : Cubieboard 2 Allwinner A20 multi_v7_defconfig cubox : SolidRun Cubox Marvell 88AP510 dove_defconfig multi-trimslice : CompuLab TrimSlice Nvidia Tegra 20 multi_v7_defconfig overo : Gumstix Overo Fire+Tobi TI OMAP3530 omap2plus_defconfig panda : TI PandaBoard ES TI OMAP4460 omap2plus_defconfig multi-panda : multi_v7_defconfig sama5 : Atmel SAMA5 devboard Atmel SAMA5D35 sama5_defconfig snowball : CALAO Snowball ST-Ericsson A9500 u8500_defconfig multi-snowball : multi_v7_defconfig wandboard : Wandboard Freescale i.MX6 Quad imx_v6_v7_defconfig multi-wandboard : multi_v7_defconfig Last entries of failed logs below: ======================================================================== Board bbb failure log: ------------------------------------------------- Environment size: 4203/131068 bytes U-Boot# setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp' setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp' U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp U-Boot# tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.10.15-66-g129bd6c/uImage.omap tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.10.15-66-g129bd6c/uImage.omap link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.4; our IP address is 172.16.1.103 Filename '/srv/tftp/queue/v3.10.15-66-g129bd6c/uImage.omap'. Load address: 0x80000000 Loading: *################################################################# ##############################################################T ### ################################################################# ################################################################# ################################################################# ################################################################# #################################T ################################ ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ##### 240.2 KiB/s done Bytes transferred = 4018312 (3d5088 hex) U-Boot# tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.15-66-g129bd6c/am335x-boneblack.dtb tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.15-66-g129bd6c/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.4; our IP address is 172.16.1.103 Filename '/srv/tftp/queue/v3.10.15-66-g129bd6c/am335x-boneblack.dtb'. Load address: 0x81000000 Loading: * TFTP error: 'File not found' (1) Not retrying... U-Boot# ~$off ======================================================================== Board cubie2 failure log: ------------------------------------------------- netmask=255.255.255.0 panicarg=panic=10 partition=0:1 scriptaddr=0x44000000 serverip=172.16.1.4 setargs=if test -z \\"$root\\"; then if test \\"$bootpath\\" = "boot/"; then root="/dev/mmcblk0p1 rootwait"; else root="/dev/mmcblk0p2 rootwait"; fi; fi; setenv bootargs console=${console} root=${root} loglevel=${loglevel} ${panicarg} ${extraargs} stderr=serial stdin=serial stdout=serial Environment size: 2099/131068 bytes sun7i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i#tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.10.15-66-g129bd6c/uImage.multi-1g tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.10.15-66-g129bd6c/uImage.multi-1g Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.149 Filename '/srv/tftp/queue/v3.10.15-66-g129bd6c/uImage.multi-1g'. Load address: 0x41000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 1.8 MiB/s done Bytes transferred = 1819952 (1bc530 hex) sun7i#tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.10.15-66-g129bd6c/sun7i-a20-cubieboard2.dtb tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.10.15-66-g129bd6c/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.149 Filename '/srv/tftp/queue/v3.10.15-66-g129bd6c/sun7i-a20-cubieboard2.dtb'. Load address: 0x42000000 Loading: * TFTP error: 'File not found' (1) Not retrying... sun7i#node: cubie2 status: on ~$off ======================================================================== Board cubie failure log: ------------------------------------------------- io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver ipmi message handler version 39.2 IPMI System Interface driver. ipmi_si: Adding default-specified kcs state machine ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca2-0000000000000ca2> Trying to free nonexistent resource <0000000000000ca3-0000000000000ca3> ipmi_si: Adding default-specified smic state machine ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca9-0000000000000ca9> Trying to free nonexistent resource <0000000000000caa-0000000000000caa> Trying to free nonexistent resource <0000000000000cab-0000000000000cab> ipmi_si: Adding default-specified bt state machine ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <00000000000000e4-00000000000000e4> Trying to free nonexistent resource <00000000000000e5-00000000000000e5> Trying to free nonexistent resource <00000000000000e6-00000000000000e6> ipmi_si: Unable to find any System Interface(s) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 17) is a U6_16550A console [ttyS0] enabled usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 Registering SWP/SWPB emulation handler ../../drivers/rtc/hctosys.c: unable to open rtc device (rtc0) List of all partitions: No filesystem could mount root, tried: Kernel panic - not syncing: VF~$off ======================================================================== Board multi-beaver failure log: ------------------------------------------------- TFTP from server 172.16.1.4; our IP address is 172.16.1.170 Filename '/srv/tftp/queue/v3.10.15-66-g129bd6c/uImage.multi-2g'. Load address: 0x82000000 Loading: *################################################################# ###########################node: beaver status: on T ###############T ####################### ################################################################# ################################################################# ################################################################# ############################### 145.5 KiB/s done Bytes transferred = 1819952 (1bc530 hex) Tegra30 (Beaver) # tftpboot 0x83000000 172.16.1.4:/srv/tftp/queue/v3.10.15-66-g129bd6c/tegra30-beaver.dtb tftpboot 0x83000000 172.16.1.4:/srv/tftp/queue/v3.10.15-66-g129bd6c/tegra30-beaver.dtb Using asx0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.170 Filename '/srv/tftp/queue/v3.10.15-66-g129bd6c/tegra30-beaver.dtb'. Load address: 0x83000000 Loading: *#### 1.4 MiB/s done Bytes transferred = 16546 (40a2 hex) Tegra30 (Beaver) # bootm 0x82000000 - 0x83000000 bootm 0x82000000 - 0x83000000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1819888 Bytes = 1.7 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Kernel Image ... OK Loading Device Tree to 8fff8000, end 8ffff0a1 ... OK Starting kernel ... ~$off ======================================================================== Board multi-panda failure log: ------------------------------------------------- TFTP from server 172.16.1.4; our IP address is 172.16.1.182 Filename '/srv/tftp/queue/v3.10.15-66-g129bd6c/uImage.multi-2g'. Load address: 0x80000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ##################T ############# done Bytes transferred = 1819952 (1bc530 hex) Panda # tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.15-66-g129bd6c/omap4-panda-es.dtb tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.15-66-g129bd6c/omap4-panda-es.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.182 Filename '/srv/tftp/queue/v3.10.15-66-g129bd6c/omap4-panda-es.dtb'. Load address: 0x81000000 Loading: *#### done Bytes transferred = 17271 (4377 hex) Panda # bootm 0x80000000 - 0x81000000 bootm 0x80000000 - 0x81000000 ## Booting kernel from Legacy Image at 80000000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1819888 Bytes = 1.7 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 81000000 Booting using the fdt blob at 0x81000000 Loading Kernel Image ... OK OK reserving fdt memory region: addr=9d000000 size=3000000 Using Device Tree in place at 81000000, end 81007376 Starting kernel ... ~$off ======================================================================== Board multi-snowball failure log: ------------------------------------------------- ipaddr=172.16.1.117 serverip=172.16.1.7 bootfile=queue/v3.10.15-66-g129bd6c/uImage.multi-snowball autoboot=no Environment size: 1706/4092 bytes U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.10.15-66-g129bd6c/uImage.multi-snowball tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.10.15-66-g129bd6c/uImage.multi-snowball smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.117 Filename '/srv/tftp/queue/v3.10.15-66-g129bd6c/uImage.multi-snowball'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### done Bytes transferred = 1819952 (1bc530 hex) U8500 $ bootm 0x100000 bootm 0x100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1819888 Bytes = 1.7 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off ======================================================================== Board multi-trimslice failure log: ------------------------------------------------- *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.131 TrimSlice # setenv bootfile queue/v3.10.15-66-g129bd6c/uImage.multi-trimslice setenv bootfile queue/v3.10.15-66-g129bd6c/uImage.multi-trimslice TrimSlice # setenv autoboot no setenv autoboot no TrimSlice # printenv printenv bootdelay=5 baudrate=115200 loadaddr=0x408000 stdin=serial,usbkbd stdout=serial,lcd stderr=serial,lcd console=ttyS0,115200n8 ethact=RTL8169#0 gateway=172.16.1.1 bootcmd=none bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw autoload=no netmask=255.255.255.0 ipaddr=172.16.1.131 serverip=172.16.1.7 bootfile=queue/v3.10.15-66-g129bd6c/uImage.multi-trimslice autoboot=no Environment size: 376/65532 bytes TrimSlice # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw TrimSlice # tftpboot 0x800000 172.16.1.4:/srv/tftp/queue/v3.10.15-66-g129bd6c/uImage.multi-trimslice tftpboot 0x800000 172.16.1.4:/srv/tftp/queue/v3.10.15-66-g129bd6c/uImage.multi-trimslice Using RTL8169#0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.131 Filename '/srv/tftp/queue/v3.10.15-66-g129bd6c/uImage.multi-trimslice'. Load address: 0x800000 Loading: * TFTP error: 'File not found' (1) Not retrying... TrimSlice # ~$off ======================================================================== Board multi-wandboard failure log: ------------------------------------------------- mmcroot=/dev/mmcblk0p2 ro mmcrootfstype=ext4 rootwait netargs=setenv bootargs console=${console},${baudrate} root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp netboot=echo Booting from net ...; run netargs; if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; ${get_cmd} zImage; if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if ${get_cmd} ${fdt_addr} ${fdt_file}; then bootz ${loadaddr} - ${fdt_addr}; else if test ${boot_fdt} = try; then bootz ${loadaddr}; else echo WARN: Cannot load the DT; fi; fi; else bootz ${loadaddr}; fi; netmask=255.255.255.0 script=boot.scr serverip=172.16.1.7 uimage=uImage update_sd_firmware=if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; if mmc dev ${mmcdev}; then if ${get_cmd} ${update_sd_firmware_filename}; then setexpr fw_sz ${filesize} / 0x200; setexpr fw_sz ${fw_sz} + 1; mmc write ${loadaddr} 0x2 ${fw_sz}; fi; fi update_sd_firmware_filename=u-boot.imx Environment size: 2719/8188 bytes => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.10.15-66-g129bd6c/uImage.multi-256m tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.10.15-66-g129bd6c/uImage.multi-256m Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.150 Filename '/srv/tftp/queue/v3.10.15-66-g129bd6c/uImage.multi-256m'. Load address: 0x12000000 Loading: *################################################################# ################################################################# ################################################################# ##################################################T ############### ################################################################# ############################### 327.1 KiB/s done Bytes transferred = 1819952 (1bc530 hex) => tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.10.15-66-g129bd6c/imx6q-wandboard.dtb tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.10.15-66-g129bd6c/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.150 Filename '/srv/tftp/queue/v3.10.15-66-g129bd6c/imx6q-wandboard.dtb'. Load address: 0x14000000 Loading: * TFTP error: 'File not found' (1) Not retrying... => ~$off ======================================================================== Board snowball failure log: ------------------------------------------------- collisions:0 txqueuelen:1000 RX bytes:6326 (6.1 KiB) TX bytes:5084 (4.9 KiB) Interrupt:50 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) root@snowball:~# halt halt Broadcast message from root@snowball (ttyAMA2) (Wed Oct 9 12:21:57 2013): The system is going down for system halt NOW! INIT: Switching to runlevel: 0 INIT: Sending processes the TERM signal [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel 0. [....] Stopping web server: apache2 ... waiting [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Asking all remaining processes to terminate...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] All processes ended within 1 seconds...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Stopping enhanced syslogd: rsyslogd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [[36minfo[39;49m] Saving the system clock. [[36minfo[39;49m] Hardware Clock updated to Wed Oct 9 12:22:06 UTC 2013. [....] Deconfiguring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0/08:00:08:1e:0f:44 Sending on LPF/eth0/08:00:08:1e:0f:44 Sending on Socket/fallback DHCPRELEASE on eth0 to 172.16.1.1 port 67 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Deactivating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. EXT4-fs (mmcblk0p4): re-mounted. Opts: (null) [[36minfo[39;49m] Will now halt. Power do~$off ======================================================================== Board wandboard failure log: ------------------------------------------------- uimage=uImage update_sd_firmware=if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; if mmc dev ${mmcdev}; then if ${get_cmd} ${update_sd_firmware_filename}; then setexpr fw_sz ${filesize} / 0x200; setexpr fw_sz ${fw_sz} + 1; mmc write ${loadaddr} 0x2 ${fw_sz}; fi; fi update_sd_firmware_filename=u-boot.imx Environment size: 2712/8188 bytes => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.10.15-66-g129bd6c/uImage.imx tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.10.15-66-g129bd6c/uImage.imx Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.150 Filename '/srv/tftp/queue/v3.10.15-66-g129bd6c/uImage.imx'. Load address: 0x12000000 Loading: *###################################T ############################## ################################################################# ##################################################T ############### ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ##################################T ############################### ################################################################# ################################################################# ################################################################# ########################################## 255.9 KiB/s done Bytes transferred = 4204328 (402728 hex) => tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.10.15-66-g129bd6c/imx6q-wandboard.dtb tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.10.15-66-g129bd6c/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.150 Filename '/srv/tftp/queue/v3.10.15-66-g129bd6c/imx6q-wandboard.dtb'. Load address: 0x14000000 Loading: * TFTP error: 'File not found' (1) Not retrying... => ~$off

11 years, 2 months

queue build: 12 warnings 0 failures (queue/v3.10.15-66-g129bd6c)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was queue, found at: Local queue of patches applied from http://git.kernel.org/cgit/linux/kernel/git/stable/stable-queue.git Topmost commit: 129bd6c nilfs2: fix issue with race condition of competition between segments for dirty blocks Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/queue/v3.10.15-66-g129bd6c/ Runtime: 37m 30s Passed: 121 Failed: 0 Warnings: 12 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 arch/arm/mach-pxa/em-x270.c:480:18: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 arch/arm/mach-pxa/em-x270.c:484:18: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 arch/arm/mach-pxa/em-x270.c:603:19: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 drivers/clocksource/bcm_kona_timer.c:210:199: warning: comparison of distinct pointer types lacks a cast [enabled by default] 1 drivers/gpio/gpio-omap.c:1529:13: warning: 'omap_gpio_init_context' defined but not used [-Wunused-function] 1 drivers/spi/spi-pl022.c:2226:9: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 drivers/video/backlight/max8925_bl.c:177:3: warning: statement with no effect [-Wunused-value] 4 arch/arm/mm/init.c:603:2: warning: passing argument 1 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default] 4 arch/arm/mm/init.c:603:2: warning: passing argument 2 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default] 4 arch/arm/mm/init.c:731:2: warning: passing argument 1 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default] 4 arch/arm/mm/init.c:731:2: warning: passing argument 2 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default] 7 net/core/secure_seq.c:17:13: warning: 'net_secret_init' defined but not used [-Wunused-function] Section mismatches:

11 years, 2 months

queue boot: 10 passed 6 failed (queue/v3.11.4-84-ga598a2b)

by Olof's autobooter

arndale : passed 0:49.53 bbb : FAILED 1:24.28 beaver : passed 0:40.26 multi-beaver : passed 0:52.54 cubie2 : FAILED 0:46.34 cubie : passed 0:48.01 cubox : passed 0:50.09 overo : passed 1:11.28 panda : passed 0:51.20 multi-panda : passed 0:49.93 sama5 : passed 1:28.52 snowball : passed 1:00.11 multi-snowball : FAILED 0:46.06 multi-trimslice : FAILED 0:59.17 wandboard : FAILED 0:40.95 multi-wandboard : FAILED 0:40.81 Board legend: Board : System SoC Defconfig arndale : InSignal ArndaleBoard Samsung Exynos 5250 exynos_defconfig bbb : BeagleBone Black TI Sitara AM3359 omap2plus_defconfig beaver : Nvidia Beaver Nvidia Tegra 30 tegra_defconfig multi-beaver : multi_v7_defconfig cubie : Cubieboard Allwinner A10 multi_v7_defconfig cubie2 : Cubieboard 2 Allwinner A20 multi_v7_defconfig cubox : SolidRun Cubox Marvell 88AP510 dove_defconfig multi-trimslice : CompuLab TrimSlice Nvidia Tegra 20 multi_v7_defconfig overo : Gumstix Overo Fire+Tobi TI OMAP3530 omap2plus_defconfig panda : TI PandaBoard ES TI OMAP4460 omap2plus_defconfig multi-panda : multi_v7_defconfig sama5 : Atmel SAMA5 devboard Atmel SAMA5D35 sama5_defconfig snowball : CALAO Snowball ST-Ericsson A9500 u8500_defconfig multi-snowball : multi_v7_defconfig wandboard : Wandboard Freescale i.MX6 Quad imx_v6_v7_defconfig multi-wandboard : multi_v7_defconfig Last entries of failed logs below: ======================================================================== Board bbb failure log: ------------------------------------------------- Environment size: 4202/131068 bytes U-Boot# setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp' setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp' U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp U-Boot# tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.11.4-84-ga598a2b/uImage.omap tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.11.4-84-ga598a2b/uImage.omap link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.4; our IP address is 172.16.1.103 Filename '/srv/tftp/queue/v3.11.4-84-ga598a2b/uImage.omap'. Load address: 0x80000000 Loading: *################################################################# ############################################T ##################### ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# #################################################T ################ ################################################################# ################################################################# #################### 243.2 KiB/s done Bytes transferred = 4091112 (3e6ce8 hex) U-Boot# tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.11.4-84-ga598a2b/am335x-boneblack.dtb tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.11.4-84-ga598a2b/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.4; our IP address is 172.16.1.103 Filename '/srv/tftp/queue/v3.11.4-84-ga598a2b/am335x-boneblack.dtb'. Load address: 0x81000000 Loading: * TFTP error: 'File not found' (1) Not retrying... U-Boot# ~$off ======================================================================== Board cubie2 failure log: ------------------------------------------------- setargs=if test -z \\"$root\\"; then if test \\"$bootpath\\" = "boot/"; then root="/dev/mmcblk0p1 rootwait"; else root="/dev/mmcblk0p2 rootwait"; fi; fi; setenv bootargs console=${console} root=${root} loglevel=${loglevel} ${panicarg} ${extraargs} stderr=serial stdin=serial stdout=serial Environment size: 2098/131068 bytes sun7i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i#tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.11.4-84-ga598a2b/uImage.multi-1g tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.11.4-84-ga598a2b/uImage.multi-1g Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.149 Filename '/srv/tftp/queue/v3.11.4-84-ga598a2b/uImage.multi-1g'. Load address: 0x41000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# #################################################### 1.8 MiB/s done Bytes transferred = 3589928 (36c728 hex) sun7i#tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.11.4-84-ga598a2b/sun7i-a20-cubieboard2.dtb tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.11.4-84-ga598a2b/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.149 Filename '/srv/tftp/queue/v3.11.4-84-ga598a2b/sun7i-a20-cubieboard2.dtb'. Load address: 0x42000000 Loading: * TFTP error: 'File not found' (1) Not retrying... sun7i#node: cubie2 status: on ~$off ======================================================================== Board multi-snowball failure log: ------------------------------------------------- U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.11.4-84-ga598a2b/uImage.multi-snowball tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.11.4-84-ga598a2b/uImage.multi-snowball smc911x: detected LAN9221 controller node: snowball status: on smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.117 Filename '/srv/tftp/queue/v3.11.4-84-ga598a2b/uImage.multi-snowball'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ####################################################### done Bytes transferred = 3606650 (37087a hex) U8500 $ bootm 0x100000 bootm 0x100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3606586 Bytes = 3.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off ======================================================================== Board multi-trimslice failure log: ------------------------------------------------- autoboot=no Environment size: 375/65532 bytes TrimSlice # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw TrimSlice # tftpboot 0x800000 172.16.1.4:/srv/tftp/queue/v3.11.4-84-ga598a2b/uImage.multi-trimslice tftpboot 0x800000 172.16.1.4:/srv/tftp/queue/v3.11.4-84-ga598a2b/uImage.multi-trimslice Using RTL8169#0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.131 Filename '/srv/tftp/queue/v3.11.4-84-ga598a2b/uImage.multi-trimslice'. Load address: 0x800000 Loading: *#############################################################T #### ################################################################# ########################T ######################################### ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ####################################################### done Bytes transferred = 3606485 (3707d5 hex) TrimSlice # bootm 0x800000 bootm 0x800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3606421 Bytes = 3.4 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... ~$off ======================================================================== Board multi-wandboard failure log: ------------------------------------------------- serverip=172.16.1.7 uimage=uImage update_sd_firmware=if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; if mmc dev ${mmcdev}; then if ${get_cmd} ${update_sd_firmware_filename}; then setexpr fw_sz ${filesize} / 0x200; setexpr fw_sz ${fw_sz} + 1; mmc write ${loadaddr} 0x2 ${fw_sz}; fi; fi update_sd_firmware_filename=u-boot.imx Environment size: 2718/8188 bytes => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.11.4-84-ga598a2b/uImage.multi-256m tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.11.4-84-ga598a2b/uImage.multi-256m Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.150 Filename '/srv/tftp/queue/v3.11.4-84-ga598a2b/uImage.multi-256m'. Load address: 0x12000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# #################################################### 4 MiB/s done Bytes transferred = 3589928 (36c728 hex) => tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.11.4-84-ga598a2b/imx6q-wandboard.dtb tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.11.4-84-ga598a2b/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.150 Filename '/srv/tftp/queue/v3.11.4-84-ga598a2b/imx6q-wandboard.dtb'. Load address: 0x14000000 Loading: * TFTP error: 'File not found' (1) Not retrying... => node: wandboard status: on ~$off ======================================================================== Board wandboard failure log: ------------------------------------------------- update_sd_firmware=if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; if mmc dev ${mmcdev}; then if ${get_cmd} ${update_sd_firmware_filename}; then setexpr fw_sz ${filesize} / 0x200; setexpr fw_sz ${fw_sz} + 1; mmc write ${loadaddr} 0x2 ${fw_sz}; fi; fi update_sd_firmware_filename=u-boot.imx Environment size: 2711/8188 bytes => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.11.4-84-ga598a2b/uImage.imx tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.11.4-84-ga598a2b/uImage.imx Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.150 Filename '/srv/tftp/queue/v3.11.4-84-ga598a2b/uImage.imx'. Load address: 0x12000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################################# 4.1 MiB/s done Bytes transferred = 4303776 (41aba0 hex) => tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.11.4-84-ga598a2b/imx6q-wandboard.dtb tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.11.4-84-ga598a2b/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.150 Filename '/srv/tftp/queue/v3.11.4-84-ga598a2b/imx6q-wandboard.dtb'. Load address: 0x14000000 Loading: * TFTP error: 'File not found' (1) Not retrying... => node: wandboard status: on ~$off

11 years, 2 months

queue build: 11 warnings 0 failures (queue/v3.11.4-84-ga598a2b)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was queue, found at: Local queue of patches applied from http://git.kernel.org/cgit/linux/kernel/git/stable/stable-queue.git Topmost commit: a598a2b ipc: fix race with LSMs Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/queue/v3.11.4-84-ga598a2b/ Runtime: 39m 17s Passed: 119 Failed: 0 Warnings: 11 Section mismatches: 8 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 arch/arm/mach-omap2/gpmc.c:1495:4: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' [-Wformat=] 1 drivers/dma/ste_dma40.c:3228:2: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' [-Wformat=] 1 drivers/dma/ste_dma40.c:3582:3: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' [-Wformat=] 1 drivers/dma/ste_dma40.c:3582:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'resource_size_t' [-Wformat=] 1 drivers/dma/ste_dma40.c:3593:5: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'resource_size_t' [-Wformat=] 1 drivers/mmc/host/tmio_mmc_pio.c:798:19: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 drivers/spi/spi-pl022.c:2197:9: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 drivers/tty/serial/imx.c:1134:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 4 drivers/usb/host/xhci.c:3574:17: warning: unused variable 'dev' [-Wunused-variable] 4 drivers/usb/host/xhci.c:3660:17: warning: unused variable 'dev' [-Wunused-variable] 5 net/core/secure_seq.c:17:13: warning: 'net_secret_init' defined but not used [-Wunused-function] Section mismatches: 1 bcm_defconfig WARNING: drivers/built-in.o(.data+0x5a7c): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the function .init.text:sdhci_bcm_kona_probe() 1 bcm_defconfig WARNING: drivers/built-in.o(.data+0x5aa4): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the (unknown reference) .init.data:(unknown) 1 bcm_defconfig WARNING: drivers/mmc/built-in.o(.data+0x4dc): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the function .init.text:sdhci_bcm_kona_probe() 1 bcm_defconfig WARNING: drivers/mmc/built-in.o(.data+0x504): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the (unknown reference) .init.data:(unknown) 1 bcm_defconfig WARNING: drivers/mmc/host/built-in.o(.data+0x0): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the function .init.text:sdhci_bcm_kona_probe() 1 bcm_defconfig WARNING: drivers/mmc/host/built-in.o(.data+0x28): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the (unknown reference) .init.data:(unknown) 1 bcm_defconfig WARNING: vmlinux.o(.data+0xe43c): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the function .init.text:sdhci_bcm_kona_probe() 1 bcm_defconfig WARNING: vmlinux.o(.data+0xe464): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the (unknown reference) .init.data:(unknown)

11 years, 2 months

queue boot: 14 pass, 3 fail (v3.10.15-42-ga38fa72)

by Kevin Hilman build bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: queue Git describe: v3.10.15-42-ga38fa72 Failed boot tests (console logs at the end) =========================================== armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig armada-370-mirabox: FAIL: multi_v7_defconfig sun4i-a10-cubieboard: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- omap3-beagle-xm PASS: 0 min 51.9 sec am335x-bone PASS: 0 min 26.3 sec omap3-tobi,3530overo PASS: 0 min 36.7 sec omap4-panda PASS: 1 min 10.0 sec omap4-panda-es PASS: 1 min 10.9 sec omap3-tobi,3730storm PASS: 0 min 32.9 sec omap3-beagle PASS: 0 min 51.0 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 18.1 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.4 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.3 sec armada-370-mirabox PASS: 0 min 17.8 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.4 sec multi_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 FAIL: 0 min 20.0 sec armada-370-mirabox FAIL: 0 min 17.9 sec sun4i-a10-cubieboard FAIL: 1 min 8.9 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 16.4 sec Console logs for failures ========================= multi_v7_defconfig ------------------ armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------ CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.10.15-00042-ga38fa72 #1 [<c0013bcc>] (unwind_backtrace+0x0/0xf4) from [<c0011488>] (show_stack+0x10/0x14) [<c0011488>] (show_stack+0x10/0x14) from [<c0275660>] (panic+0xa0/0x1e8) [<c0275660>] (panic+0xa0/0x1e8) from [<c032610c>] (mount_block_root+0x294/0x298) [<c032610c>] (mount_block_root+0x294/0x298) from [<c03262c0>] (prepare_namespace+0x14c/0x184) [<c03262c0>] (prepare_namespace+0x14c/0x184) from [<c0325d5c>] (kernel_init_freeable+0x1c4/0x1d4) [<c0325d5c>] (kernel_init_freeable+0x1c4/0x1d4) from [<c02713c4>] (kernel_init+0x8/0x158) [<c02713c4>] (kernel_init+0x8/0x158) from [<c000df18>] (ret_from_fork+0x14/0x3c) CPU0: stopping CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.15-00042-ga38fa72 #1 [<c0013bcc>] (unwind_backtrace+0x0/0xf4) from [<c0011488>] (show_stack+0x10/0x14) [<c0011488>] (show_stack+0x10/0x14) from [<c001234c>] (handle_IPI+0x108/0x130) [<c001234c>] (handle_IPI+0x108/0x130) from [<c000851c>] (armada_370_xp_handle_irq+0x90/0xa8) [<c000851c>] (armada_370_xp_handle_irq+0x90/0xa8) from [<c000dac0>] (__irq_svc+0x40/0x50) Exception stack(0xc0355f70 to 0xc0355fb8) 5f60: c1d566d8 00000000 000000be 000000be 5f80: c037fa2c c035c4a8 c027cebc c0354000 c037fa2c c0354000 c0354000 c035c45c 5fa0: 0000001f c0355fb8 c000f070 c004f8e0 60000113 ffffffff [<c000dac0>] (__irq_svc+0x40/0x50) from [<c004f8e0>] (cpu_startup_entry+0xfc/0x140) [<c004f8e0>] (cpu_startup_entry+0xfc/0x140) from [<c0325a3c>] (start_kernel+0x2c4/0x2d0) [<c0325a3c>] (start_kernel+0x2c4/0x2d0) from [<00008074>] (0x8074) # PYBOOT: Exception: kernel: ERROR: failed to boot: Kernel panic # PYBOOT: Time: 19.96 seconds. # PYBOOT: Result: FAIL armada-370-mirabox: FAIL: last 24 lines of boot log: ---------------------------------------------------- usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6 Registering SWP/SWPB emulation handler ../../drivers/rtc/hctosys.c: unable to open rtc device (rtc0) List of all partitions: No filesystem could mount root, tried: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.15-00042-ga38fa72 #1 [<c0013bcc>] (unwind_backtrace+0x0/0xf4) from [<c0011488>] (show_stack+0x10/0x14) [<c0011488>] (show_stack+0x10/0x14) from [<c0275660>] (panic+0xa0/0x1e8) [<c0275660>] (panic+0xa0/0x1e8) from [<c032610c>] (mount_block_root+0x294/0x298) [<c032610c>] (mount_block_root+0x294/0x298) from [<c03262c0>] (prepare_namespace+0x14c/0x184) [<c03262c0>] (prepare_namespace+0x14c/0x184) from [<c0325d5c>] (kernel_init_freeable+0x1c4/0x1d4) [<c0325d5c>] (kernel_init_freeable+0x1c4/0x1d4) from [<c02713c4>] (kernel_init+0x8/0x158) [<c02713c4>] (kernel_init+0x8/0x158) from [<c000df18>] (ret_from_fork+0x14/0x3c) # PYBOOT: Exception: kernel: ERROR: failed to boot: Kernel panic # PYBOOT: Time: 17.86 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 24 lines of boot log: ------------------------------------------------------ ipmi_si: Adding default-specified bt state machine ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <00000000000000e4-00000000000000e4> Trying to free nonexistent resource <00000000000000e5-00000000000000e5> Trying to free nonexistent resource <00000000000000e6-00000000000000e6> ipmi_si: Unable to find any System Interface(s) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 17) is a U6_16550A console [ttyS0] enabled usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 Registering SWP/SWPB emulation handler ../../drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Waiting for root device /dev/mmcblk0p2... # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 68.89 seconds. # PYBOOT: Result: FAIL

11 years, 2 months

next-thierry boot: 33 pass, 0 fail (v3.12-rc4-4340-g56a7390)

by Kevin Hilman build bot

Automated DT boot report for various ARM defconfigs. Boot test simply checks if kernel can boot to initramfs with busybox and run some basic commands (e.g. 'cat /proc/cpuinfo'). Tree/Branch: next-thierry Git describe: v3.12-rc4-4340-g56a7390 Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 34.6 sec omap3-beagle-xm PASS: 0 min 51.1 sec am335x-bone PASS: 0 min 26.1 sec omap3-tobi,3530overo PASS: 0 min 21.2 sec omap4-panda PASS: 1 min 6.0 sec omap4-panda-es PASS: 1 min 6.3 sec omap3-tobi,3730storm PASS: 0 min 20.4 sec omap3-beagle PASS: 0 min 50.3 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.1 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.2 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.2 sec imx6q-wandboard PASS: 0 min 14.8 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.9 sec armada-370-mirabox PASS: 0 min 20.0 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.7 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 25.1 sec tegra30-beaver PASS: 0 min 14.2 sec am335x-boneblack PASS: 0 min 39.4 sec omap3-beagle-xm PASS: 0 min 51.7 sec armada-370-mirabox PASS: 0 min 20.6 sec omap4-panda PASS: 1 min 1.4 sec omap4-panda-es PASS: 1 min 4.0 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.6 sec sun4i-a10-cubieboard PASS: 0 min 13.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.6 sec omap3-tobi,3530overo PASS: 0 min 19.7 sec am335x-bone PASS: 0 min 33.2 sec imx6q-wandboard PASS: 0 min 16.8 sec omap3-tobi,3730storm PASS: 0 min 19.4 sec imx6dl-wandboard,wand-dual PASS: 0 min 17.9 sec omap3-beagle PASS: 0 min 48.2 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 31.4 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.3 sec

11 years, 2 months

queue boot: 25 pass, 2 fail (v3.11.4-49-g4f309b3)

by Kevin Hilman build bot

Automated DT boot report for various ARM defconfigs. Boot test simply checks if kernel can boot to initramfs with busybox and run some basic commands (e.g. 'cat /proc/cpuinfo'). Tree/Branch: queue Git describe: v3.11.4-49-g4f309b3 Failed boot tests (console logs at the end) =========================================== armada-370-mirabox: FAIL: multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- omap3-beagle-xm PASS: 0 min 52.5 sec am335x-bone PASS: 0 min 26.5 sec omap3-tobi,3530overo PASS: 0 min 42.7 sec omap4-panda PASS: 1 min 7.7 sec omap4-panda-es PASS: 1 min 7.6 sec omap3-tobi,3730storm PASS: 0 min 42.4 sec omap3-beagle PASS: 1 min 1.2 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 15.4 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 15.8 sec imx6dl-wandboard,wand-solo PASS: 0 min 15.6 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.8 sec armada-370-mirabox PASS: 0 min 18.2 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.1 sec multi_v7_defconfig ------------------ tegra30-beaver PASS: 0 min 14.3 sec omap3-beagle-xm PASS: 0 min 51.9 sec armada-370-mirabox FAIL: 0 min 19.6 sec omap4-panda PASS: 1 min 0.1 sec armada-xp-openblocks-ax3-4 FAIL: 0 min 22.4 sec sun4i-a10-cubieboard PASS: 0 min 13.8 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.2 sec omap3-tobi,3530overo PASS: 0 min 41.1 sec am335x-bone PASS: 0 min 33.6 sec omap4-panda-es PASS: 1 min 5.3 sec omap3-tobi,3730storm PASS: 0 min 43.5 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.3 sec omap3-beagle PASS: 0 min 49.9 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.4 sec Console logs for failures ========================= multi_v7_defconfig ------------------ armada-370-mirabox: FAIL: last 24 lines of boot log: ---------------------------------------------------- [ 139.326195] usbhid: USB HID core driver [ 139.330220] TCP: cubic registered [ 139.333912] NET: Registered protocol family 10 [ 139.338821] sit: IPv6 over IPv4 tunneling driver [ 139.343881] Key type dns_resolver registered [ 139.348214] VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6 [ 139.355936] Registering SWP/SWPB emulation handler [ 139.361297] ../../drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 139.368636] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6 [ 139.376134] Please append a correct "root=" boot option; here are the available partitions: [ 139.384522] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 139.392803] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.11.4-00049-g4f309b3 #1 [ 139.400067] [<c00157bc>] (unwind_backtrace+0x0/0xf4) from [<c001168c>] (show_stack+0x10/0x14) [ 139.408613] [<c001168c>] (show_stack+0x10/0x14) from [<c04b12d0>] (dump_stack+0x84/0x94) [ 139.416729] [<c04b12d0>] (dump_stack+0x84/0x94) from [<c04ae7f4>] (panic+0xa0/0x1f0) [ 139.424491] [<c04ae7f4>] (panic+0xa0/0x1f0) from [<c06470ec>] (mount_block_root+0x1a0/0x230) [ 139.432947] [<c06470ec>] (mount_block_root+0x1a0/0x230) from [<c0647284>] (mount_root+0x108/0x110) [ 139.441923] [<c0647284>] (mount_root+0x108/0x110) from [<c06473e4>] (prepare_namespace+0x158/0x1a0) [ 139.450997] [<c06473e4>] (prepare_namespace+0x158/0x1a0) from [<c0646da8>] (kernel_init_freeable+0x1c8/0x1d8) [ 139.460932] [<c0646da8>] (kernel_init_freeable+0x1c8/0x1d8) from [<c04ac350>] (kernel_init+0x8/0x158) [ 139.470172] [<c04ac350>] (kernel_init+0x8/0x158) from [<c000e2b8>] (ret_from_fork+0x14/0x3c) # PYBOOT: Exception: kernel: ERROR: failed to boot: Kernel panic # PYBOOT: Time: 19.55 seconds. # PYBOOT: Result: FAIL armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------ [ 159.417980] [<c001168c>] (show_stack+0x10/0x14) from [<c04b12d0>] (dump_stack+0x84/0x94) [ 159.426100] [<c04b12d0>] (dump_stack+0x84/0x94) from [<c04ae7f4>] (panic+0xa0/0x1f0) [ 159.433867] [<c04ae7f4>] (panic+0xa0/0x1f0) from [<c06470ec>] (mount_block_root+0x1a0/0x230) [ 159.442329] [<c06470ec>] (mount_block_root+0x1a0/0x230) from [<c0647284>] (mount_root+0x108/0x110) [ 159.451314] [<c0647284>] (mount_root+0x108/0x110) from [<c06473e4>] (prepare_namespace+0x158/0x1a0) [ 159.460390] [<c06473e4>] (prepare_namespace+0x158/0x1a0) from [<c0646da8>] (kernel_init_freeable+0x1c8/0x1d8) [ 159.470333] [<c0646da8>] (kernel_init_freeable+0x1c8/0x1d8) from [<c04ac350>] (kernel_init+0x8/0x158) [ 159.479580] [<c04ac350>] (kernel_init+0x8/0x158) from [<c000e2b8>] (ret_from_fork+0x14/0x3c) [ 159.488041] CPU1: stopping [ 159.490758] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.11.4-00049-g4f309b3 #1 [ 159.498008] [<c00157bc>] (unwind_backtrace+0x0/0xf4) from [<c001168c>] (show_stack+0x10/0x14) [ 159.506557] [<c001168c>] (show_stack+0x10/0x14) from [<c04b12d0>] (dump_stack+0x84/0x94) [ 159.514671] [<c04b12d0>] (dump_stack+0x84/0x94) from [<c0013b74>] (handle_IPI+0x10c/0x134) [ 159.522960] [<c0013b74>] (handle_IPI+0x10c/0x134) from [<c00086a4>] (armada_370_xp_handle_irq+0x90/0xa8) [ 159.532467] [<c00086a4>] (armada_370_xp_handle_irq+0x90/0xa8) from [<c0012180>] (__irq_svc+0x40/0x50) [ 159.541709] Exception stack(0xee873fa0 to 0xee873fe8) [ 159.546775] 3fa0: c22dc920 00000000 000000e6 000000e6 c074e175 c06c44c0 c04bb204 ee872000 [ 159.554975] 3fc0: c074e175 ee872000 ee872000 c06c4448 00000000 ee873fe8 c000f430 c00797d0 [ 159.563172] 3fe0: 60000113 ffffffff [ 159.566677] [<c0012180>] (__irq_svc+0x40/0x50) from [<c00797d0>] (cpu_startup_entry+0x100/0x144) [ 159.575487] [<c00797d0>] (cpu_startup_entry+0x100/0x144) from [<000088a4>] (0x88a4) # PYBOOT: Exception: kernel: ERROR: failed to boot: Kernel panic # PYBOOT: Time: 22.36 seconds. # PYBOOT: Result: FAIL

11 years, 2 months

queue boot: 5 passed 9 failed (queue/v3.10.15-42-ga38fa72)

by Olof's autobooter

arndale : passed 0:55.09 bbb : FAILED 1:11.27 beaver : passed 0:39.56 multi-beaver : FAILED 0:53.47 cubie2 : FAILED 0:54.33 cubie : FAILED 0:13.08 cubox : passed 0:52.32 panda : passed 0:59.88 multi-panda : FAILED 0:51.41 sama5 : passed 1:44.74 snowball : OFFLINE 0:30.57 multi-snowball : FAILED 0:48.83 multi-trimslice : FAILED 0:45.68 wandboard : FAILED 0:41.25 multi-wandboard : FAILED 0:40.47 Board legend: Board : System SoC Defconfig arndale : InSignal ArndaleBoard Samsung Exynos 5250 exynos_defconfig bbb : BeagleBone Black TI Sitara AM3359 omap2plus_defconfig beaver : Nvidia Beaver Nvidia Tegra 30 tegra_defconfig multi-beaver : multi_v7_defconfig cubie : Cubieboard Allwinner A10 multi_v7_defconfig cubie2 : Cubieboard 2 Allwinner A20 multi_v7_defconfig cubox : SolidRun Cubox Marvell 88AP510 dove_defconfig multi-trimslice : CompuLab TrimSlice Nvidia Tegra 20 multi_v7_defconfig panda : TI PandaBoard ES TI OMAP4460 omap2plus_defconfig multi-panda : multi_v7_defconfig sama5 : Atmel SAMA5 devboard Atmel SAMA5D35 sama5_defconfig snowball : CALAO Snowball ST-Ericsson A9500 u8500_defconfig multi-snowball : multi_v7_defconfig wandboard : Wandboard Freescale i.MX6 Quad imx_v6_v7_defconfig multi-wandboard : multi_v7_defconfig Last entries of failed logs below: ======================================================================== Board bbb failure log: ------------------------------------------------- Environment size: 4203/131068 bytes U-Boot# setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp' setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp' U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp U-Boot# tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.10.15-42-ga38fa72/uImage.omap tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.10.15-42-ga38fa72/uImage.omap link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.4; our IP address is 172.16.1.127 Filename '/srv/tftp/queue/v3.10.15-42-ga38fa72/uImage.omap'. Load address: 0x80000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ##### 625 KiB/s done Bytes transferred = 4017872 (3d4ed0 hex) U-Boot# tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.15-42-ga38fa72/am335x-boneblack.dtb tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.15-42-ga38fa72/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.4; our IP address is 172.16.1.127 Filename '/srv/tftp/queue/v3.10.15-42-ga38fa72/am335x-boneblack.dtb'. Load address: 0x81000000 Loading: * TFTP error: 'File not found' (1) Not retrying... U-Boot# ~$off ======================================================================== Board cubie2 failure log: ------------------------------------------------- netmask=255.255.255.0 panicarg=panic=10 partition=0:1 scriptaddr=0x44000000 serverip=172.16.1.4 setargs=if test -z \\"$root\\"; then if test \\"$bootpath\\" = "boot/"; then root="/dev/mmcblk0p1 rootwait"; else root="/dev/mmcblk0p2 rootwait"; fi; fi; setenv bootargs console=${console} root=${root} loglevel=${loglevel} ${panicarg} ${extraargs} stderr=serial stdin=serial stdout=serial Environment size: 2099/131068 bytes sun7i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i#tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.10.15-42-ga38fa72/uImage.multi-1g tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.10.15-42-ga38fa72/uImage.multi-1g Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.173 Filename '/srv/tftp/queue/v3.10.15-42-ga38fa72/uImage.multi-1g'. Load address: 0x41000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 1.8 MiB/s done Bytes transferred = 1819944 (1bc528 hex) sun7i#tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.10.15-42-ga38fa72/sun7i-a20-cubieboard2.dtb tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.10.15-42-ga38fa72/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.173 Filename '/srv/tftp/queue/v3.10.15-42-ga38fa72/sun7i-a20-cubieboard2.dtb'. Load address: 0x42000000 Loading: * TFTP error: 'File not found' (1) Not retrying... sun7i#node: cubie2 status: on ~$off ======================================================================== Board cubie failure log: ------------------------------------------------- io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver ipmi message handler version 39.2 IPMI System Interface driver. ipmi_si: Adding default-specified kcs state machine ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca2-0000000000000ca2> Trying to free nonexistent resource <0000000000000ca3-0000000000000ca3> ipmi_si: Adding default-specified smic state machine ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca9-0000000000000ca9> Trying to free nonexistent resource <0000000000000caa-0000000000000caa> Trying to free nonexistent resource <0000000000000cab-0000000000000cab> ipmi_si: Adding default-specified bt state machine ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <00000000000000e4-00000000000000e4> Trying to free nonexistent resource <00000000000000e5-00000000000000e5> Trying to free nonexistent resource <00000000000000e6-00000000000000e6> ipmi_si: Unable to find any System Interface(s) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 17) is a U6_16550A console [ttyS0] enabled usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 Registering SWP/SWPB emulation handler ../../drivers/rtc/hctosys.c: unable to open rtc device (rtc0) List of all partitions: No filesystem could mount root, tried: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown~$off ======================================================================== Board multi-beaver failure log: ------------------------------------------------- Using asx0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.114 Filename '/srv/tftp/queue/v3.10.15-42-ga38fa72/uImage.multi-2g'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##############################################################T ### ############################### 231.4 KiB/s done Bytes transferred = 1819944 (1bc528 hex) Tegra30 (Beaver) # tftpboot 0x83000000 172.16.1.4:/srv/tftp/queue/v3.10.15-42-ga38fa72/tegra30-beaver.dtb tftpboot 0x83000000 172.16.1.4:/srv/tftp/queue/v3.10.15-42-ga38fa72/tegra30-beaver.dtb Using asx0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.114 Filename '/srv/tftp/queue/v3.10.15-42-ga38fa72/tegra30-beaver.dtb'. Load address: 0x83000000 Loading: *#### 1.6 MiB/s done Bytes transferred = 16546 (40a2 hex) Tegra30 (Beaver) # bootm 0x82000000 - 0x83000000 bootm 0x82000000 - 0x83000000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1819880 Bytes = 1.7 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Kernel Image ... OK Loading Device Tree to 8fff8000, end 8ffff0a1 ... OK Starting kernel ... ~$off ======================================================================== Board multi-panda failure log: ------------------------------------------------- TFTP from server 172.16.1.4; our IP address is 172.16.1.182 Filename '/srv/tftp/queue/v3.10.15-42-ga38fa72/uImage.multi-2g'. Load address: 0x80000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### done Bytes transferred = 1819944 (1bc528 hex) Panda # tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.15-42-ga38fa72/omap4-panda-es.dtb tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.15-42-ga38fa72/omap4-panda-es.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.182 Filename '/srv/tftp/queue/v3.10.15-42-ga38fa72/omap4-panda-es.dtb'. Load address: 0x81000000 Loading: *#### done Bytes transferred = 17271 (4377 hex) Panda # bootm 0x80000000 - 0x81000000 bootm 0x80000000 - 0x81000000 ## Booting kernel from Legacy Image at 80000000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1819880 Bytes = 1.7 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 81000000 Booting using the fdt blob at 0x81000000 Loading Kernel Image ... OK OK reserving fdt memory region: addr=9d000000 size=3000000 Using Device Tree in place at 81000000, end 81007376 Starting kernel ... ~$off ======================================================================== Board multi-snowball failure log: ------------------------------------------------- ipaddr=172.16.1.141 serverip=172.16.1.7 bootfile=queue/v3.10.15-42-ga38fa72/uImage.multi-snowball autoboot=no Environment size: 1706/4092 bytes U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.10.15-42-ga38fa72/uImage.multi-snowball tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.10.15-42-ga38fa72/uImage.multi-snowball smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.141 Filename '/srv/tftp/queue/v3.10.15-42-ga38fa72/uImage.multi-snowball'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################T ### done Bytes transferred = 1819944 (1bc528 hex) U8500 $ bootm 0x100000 bootm 0x100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1819880 Bytes = 1.7 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off ======================================================================== Board multi-trimslice failure log: ------------------------------------------------- DHCP client bound to address 172.16.1.154 TrimSlice # node: trimslice status: on setenv bootfile queue/v3.10.15-42-ga38fa72/uImage.multi-trimslice setenv bootfile queue/v3.10.15-42-ga38fa72/uImage.multi-trimslice TrimSlice # setenv autoboot no setenv autoboot no TrimSlice # printenv printenv bootdelay=5 baudrate=115200 loadaddr=0x408000 stdin=serial,usbkbd stdout=serial,lcd stderr=serial,lcd console=ttyS0,115200n8 ethact=RTL8169#0 gateway=172.16.1.1 bootcmd=none bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw autoload=no netmask=255.255.255.0 ipaddr=172.16.1.154 serverip=172.16.1.7 bootfile=queue/v3.10.15-42-ga38fa72/uImage.multi-trimslice autoboot=no Environment size: 376/65532 bytes TrimSlice # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw TrimSlice # tftpboot 0x800000 172.16.1.4:/srv/tftp/queue/v3.10.15-42-ga38fa72/uImage.multi-trimslice tftpboot 0x800000 172.16.1.4:/srv/tftp/queue/v3.10.15-42-ga38fa72/uImage.multi-trimslice Using RTL8169#0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.154 Filename '/srv/tftp/queue/v3.10.15-42-ga38fa72/uImage.multi-trimslice'. Load address: 0x800000 Loading: * TFTP error: 'File not found' (1) Not retrying... TrimSlice # ~$off ======================================================================== Board multi-wandboard failure log: ------------------------------------------------- mmcroot=/dev/mmcblk0p2 ro mmcrootfstype=ext4 rootwait netargs=setenv bootargs console=${console},${baudrate} root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp netboot=echo Booting from net ...; run netargs; if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; ${get_cmd} zImage; if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if ${get_cmd} ${fdt_addr} ${fdt_file}; then bootz ${loadaddr} - ${fdt_addr}; else if test ${boot_fdt} = try; then bootz ${loadaddr}; else echo WARN: Cannot load the DT; fi; fi; else bootz ${loadaddr}; fi; netmask=255.255.255.0 script=boot.scr serverip=172.16.1.7 uimage=uImage update_sd_firmware=if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; if mmc dev ${mmcdev}; then if ${get_cmd} ${update_sd_firmware_filename}; then setexpr fw_sz ${filesize} / 0x200; setexpr fw_sz ${fw_sz} + 1; mmc write ${loadaddr} 0x2 ${fw_sz}; fi; fi update_sd_firmware_filename=u-boot.imx Environment size: 2719/8188 bytes => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.10.15-42-ga38fa72/uImage.multi-256m tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.10.15-42-ga38fa72/uImage.multi-256m Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.174 Filename '/srv/tftp/queue/v3.10.15-42-ga38fa72/uImage.multi-256m'. Load address: 0x12000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 4.1 MiB/s done Bytes transferred = 1819944 (1bc528 hex) => tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.10.15-42-ga38fa72/imx6q-wandboard.dtb tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.10.15-42-ga38fa72/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.174 Filename '/srv/tftp/queue/v3.10.15-42-ga38fa72/imx6q-wandboard.dtb'. Load address: 0x14000000 Loading: * TFTP error: 'File not found' (1) Not retrying... => ~$off ======================================================================== Board wandboard failure log: ------------------------------------------------- uimage=uImage update_sd_firmware=if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; if mmc dev ${mmcdev}; then if ${get_cmd} ${update_sd_firmware_filename}; then setexpr fw_sz ${filesize} / 0x200; setexpr fw_sz ${fw_sz} + 1; mmc write ${loadaddr} 0x2 ${fw_sz}; fi; fi update_sd_firmware_filename=u-boot.imx Environment size: 2712/8188 bytes => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.10.15-42-ga38fa72/uImage.imx tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.10.15-42-ga38fa72/uImage.imx Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.174 Filename '/srv/tftp/queue/v3.10.15-42-ga38fa72/uImage.imx'. Load address: 0x12000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########################################## 4.1 MiB/s done Bytes transferred = 4204392 (402768 hex) => tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.10.15-42-ga38fa72/imx6q-wandboard.dtb tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.10.15-42-ga38fa72/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.174 Filename '/srv/tftp/queue/v3.10.15-42-ga38fa72/imx6q-wandboard.dtb'. Load address: 0x14000000 Loading: * TFTP error: 'File not found' (1) Not retrying... => ~$off

11 years, 2 months

queue build: 12 warnings 0 failures (queue/v3.10.15-42-ga38fa72)

by Olof's autobuilder

11 years, 2 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports