Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.7-rc2-300-g3d0f0b6/
Failed boards:
arndale multi_v7_nosmp_defconfig : NO BUILD bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver arm-tegra_defconfig : FAILED 1:48.57 beaver arm-multi_v7_defconfig : FAILED 1:49.69 beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:49.89 omap5uevm arm-omap2plus_defconfig : FAILED 2:06.46 omap5uevm arm-multi_v7_defconfig : FAILED 2:13.08 omap5uevm arm-multi_lpae_defconfig : FAILED 2:20.14 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-exynos_defconfig : FAILED 1:52.71 pi arm-multi_v7_defconfig : FAILED 2:01.34 pi arm-multi_lpae_defconfig : FAILED 2:08.90 pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard multi_v7_nosmp_defconfig : NO BUILD
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:16.02 arndale arm-exynos_defconfig : passed 1:32.88 arndale arm-multi_v7_defconfig : passed 1:30.88 arndale arm-multi_lpae_defconfig : passed 1:41.96 bbb arm-omap2plus_defconfig : passed 1:40.97 bbb arm-multi_v7_defconfig : passed 1:18.78 beagleboard-x15 arm-omap2plus_defconfig : warnings 0:53.14 beagleboard-x15 arm-multi_v7_defconfig : warnings 0:51.81 beagleboard-x15 arm-multi_lpae_defconfig : warnings 0:55.23 capri arm-bcm_defconfig : passed 0:53.57 capri arm-multi_v7_defconfig : passed 0:49.66 chitra powerpc-pasemi_defconfig : passed 2:02.39 chitra powerpc-ppc64_defconfig : passed 2:01.64 colombus arm-sunxi_defconfig : passed 2:30.21 colombus arm-multi_v7_defconfig : passed 2:40.59 colombus arm-multi_lpae_defconfig : passed 2:26.39 cosmic arm-imx_v6_v7_defconfig : passed 3:23.38 cosmic arm-multi_v7_defconfig : passed 3:15.89 cubie arm-sunxi_defconfig : passed 0:51.36 cubie arm-multi_v7_defconfig : passed 0:57.83 cubie2 arm-sunxi_defconfig : passed 0:49.30 cubie2 arm-multi_v7_defconfig : passed 0:59.04 cubie2 arm-multi_lpae_defconfig : passed 0:51.56 cubox arm-multi_v7_defconfig : passed 1:08.91 cubox arm-mvebu_v7_defconfig : passed 1:06.49 dalmore arm-tegra_defconfig : warnings 1:27.75 dalmore arm-multi_v7_defconfig : warnings 1:31.88 dalmore arm-multi_lpae_defconfig : warnings 1:35.84 jetsontk1 arm-tegra_defconfig : warnings 0:52.00 jetsontk1 arm-multi_v7_defconfig : warnings 0:52.34 jetsontk1 arm-multi_lpae_defconfig : warnings 0:57.44 pandaes arm-omap2plus_defconfig : warnings 1:43.83 pandaes arm-multi_v7_defconfig : passed 1:49.02 parallella arm-multi_v7_defconfig : passed 2:48.87 pit arm-exynos_defconfig : passed 2:10.12 pit arm-multi_v7_defconfig : passed 2:23.17 pit arm-multi_lpae_defconfig : passed 2:15.48 seaboard arm-tegra_defconfig : warnings 1:06.96 seaboard arm-multi_v7_defconfig : warnings 0:59.67 seattle arm64-defconfig : passed 2:27.18 snow arm-exynos_defconfig : passed 2:11.00 snow arm-multi_v7_defconfig : passed 2:03.71 snow arm-multi_lpae_defconfig : passed 2:01.33 snowball arm-u8500_defconfig : passed 2:41.13 snowball arm-multi_v7_defconfig : passed 1:40.56 trimslice arm-tegra_defconfig : warnings 1:43.50 trimslice arm-multi_v7_defconfig : warnings 1:50.41 wandboard arm-imx_v6_v7_defconfig : passed 1:16.17 wandboard arm-multi_v7_defconfig : passed 1:22.19
Offline boards:
colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:18.15 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:21.73 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 2:27.70 hummingboard arm-multi_v7_defconfig : OFFLINE 2:12.69 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:47.21 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:57.04 sama5 arm-sama5_defconfig : OFFLINE 2:23.48 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:36.58 socfpga arm-socfpga_defconfig : OFFLINE 2:19.09 socfpga arm-multi_v7_defconfig : OFFLINE 2:19.67
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 3.415039] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.421559] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.428514] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.434100] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.441103] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.451101] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.463220] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.469839] [drm] No driver support for vblank timestamp query. [ 3.475783] drm drm: No connectors reported connected with modes [ 3.481788] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.508330] Console: switching to colour frame buffer device 128x48 [ 3.520309] drm drm: fb0: frame buffer device [ 3.538673] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.549453] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.555916] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.561325] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.569160] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.583688] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.590738] hub 1-0:1.0: USB hub found [ 3.594510] hub 1-0:1.0: 1 port detected [ 3.599414] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.604830] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.612567] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.628678] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.635628] hub 2-0:1.0: USB hub found [ 3.639394] hub 2-0:1.0: 1 port detected [ 3.648081] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.661741] vdd_sata,avdd_plle: disabling [ 3.666468] usb1_vbus: disabling [ 3.670568] Waiting for root device /dev/mmcblk0p1... [ 3.948681] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.894057] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [ 70.558681] random: nonblocking pool is initialized
[PYBOOT] [beaver 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:47]: got exception: timeout ~$off
[PYBOOT] [beaver 01:48]: Done.
========================================================================
Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------
[ 6.374184] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 6.381226] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.386827] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 6.394337] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 6.404335] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 6.417258] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.423877] [drm] No driver support for vblank timestamp query. [ 6.429883] drm drm: No connectors reported connected with modes [ 6.435893] [drm] Cannot find any crtc or sizes - going 1024x768 [ 6.462981] Console: switching to colour frame buffer device 128x48 [ 6.474787] drm drm: fb0: frame buffer device [ 6.501066] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 6.510367] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 6.516846] tegra-ehci 7d004000.usb: EHCI Host Controller [ 6.522278] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 6.530246] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 6.551070] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 6.558962] hub 1-0:1.0: USB hub found [ 6.562742] hub 1-0:1.0: 1 port detected [ 6.567547] tegra-ehci 7d008000.usb: EHCI Host Controller [ 6.572970] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 6.580855] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 6.601066] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 6.608851] hub 2-0:1.0: USB hub found [ 6.612626] hub 2-0:1.0: 1 port detected [ 6.622247] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 6.640402] vdd_sata,avdd_plle: disabling [ 6.645129] usb1_vbus: disabling [ 6.648538] ALSA device list: [ 6.651549] #0: NVIDIA Tegra Beaver [ 6.655755] Waiting for root device /dev/mmcblk0p1... [ 6.931071] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 7.931261] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:46]: got exception: timeout ~$off
[PYBOOT] [beaver 01:48]: Done.
========================================================================
Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.804780] Key type dns_resolver registered [ 1.809101] Registering SWP/SWPB emulation handler [ 1.817071] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.821666] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.829066] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.836219] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.842808] [drm] No driver support for vblank timestamp query. [ 1.848753] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.855135] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.860281] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.867432] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.876341] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.885667] usb 1-3: New USB device found, idVendor=0424, idProduct=3503 [ 1.885673] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.899773] hub 1-3:1.0: USB hub found [ 1.903180] max98090 1-0010: MAX98090 REVID=0x43 [ 1.903297] mmc1: new DDR MMC card at address 0001 [ 1.903322] hub 1-3:1.0: 3 ports detected [ 1.904443] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.909664] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.909850] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.910044] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.911120] mmcblk1: p1 p2 [ 1.943536] max98090 1-0010: use default 2.8v micbias [ 1.952439] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.955644] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.993039] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 2.008857] VDD10_HDMI_1.0V: disabling [ 2.009532] vdd_g3d: disabling [ 2.010604] BUCK8_2.8V: disabling [ 2.014538] ALSA device list: [ 2.016255] #0: Odroid-U3 [ 2.019867] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:47]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:48]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:49]: Done.
========================================================================
Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.932943] smps6: Bringing 1350000uV into 1200000-1200000uV [ 1.943159] mmc0: new high speed MMC card at address 0001 [ 1.949083] smps9: Bringing 0uV into 2100000-2100000uV [ 1.954502] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.959411] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.965779] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.967994] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 56:ab:e4:38:ec:53 [ 1.986970] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.993467] ldo2: Bringing 0uV into 2800000-2800000uV [ 2.001428] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.012545] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.020797] ldo9: bypassed regulator has no supply! [ 2.025912] ldo9: failed to get the current voltage(-517) [ 2.031575] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.046883] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.069271] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.075661] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.102211] smps9: Bringing 0uV into 2100000-2100000uV [ 2.120923] ldo9: bypassed regulator has no supply! [ 2.126044] ldo9: failed to get the current voltage(-517) [ 2.131707] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.146263] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 03:07:26 UTC (946696046) [ 2.162181] pbias_mmc_omap5: disabling [ 2.166129] vmmcsdio_fixed: disabling [ 2.170662] Waiting for root device /dev/mmcblk1p2... [ 2.193508] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.329405] hub 1-2:1.0: USB hub found [ 2.333416] hub 1-2:1.0: 3 ports detected [ 2.339291] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.367226] smps9: Bringing 0uV into 2100000-2100000uV [ 2.385906] ldo9: bypassed regulator has no supply! [ 2.391025] ldo9: failed to get the current voltage(-517) [ 2.396688] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:17]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:18]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:19]: Done.
========================================================================
Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.933205] smps6: Bringing 1350000uV into 1200000-1200000uV [ 1.943432] mmc0: new high speed MMC card at address 0001 [ 1.949375] smps9: Bringing 0uV into 2100000-2100000uV [ 1.954801] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.959693] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.966043] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.968051] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, b6:6f:a8:3d:de:01 [ 1.987194] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.993739] ldo2: Bringing 0uV into 2800000-2800000uV [ 2.001709] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.012801] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.020998] ldo9: bypassed regulator has no supply! [ 2.026117] ldo9: failed to get the current voltage(-517) [ 2.031783] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.047053] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.074238] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.080626] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.107238] smps9: Bringing 0uV into 2100000-2100000uV [ 2.125937] ldo9: bypassed regulator has no supply! [ 2.131056] ldo9: failed to get the current voltage(-517) [ 2.136722] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.151258] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 03:04:54 UTC (946695894) [ 2.167173] pbias_mmc_omap5: disabling [ 2.171113] vmmcsdio_fixed: disabling [ 2.175643] Waiting for root device /dev/mmcblk1p2... [ 2.193478] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.329352] hub 1-2:1.0: USB hub found [ 2.333358] hub 1-2:1.0: 3 ports detected [ 2.339229] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.367243] smps9: Bringing 0uV into 2100000-2100000uV [ 2.385932] ldo9: bypassed regulator has no supply! [ 2.391050] ldo9: failed to get the current voltage(-517) [ 2.396712] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:10]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:11]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:12]: Done.
========================================================================
Board omap5uevm-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 3.907707] ldo9: bypassed regulator has no supply! [ 3.912834] ldo9: failed to get the current voltage(-517) [ 3.918499] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 3.941418] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 3.948934] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 3.955477] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 3.961806] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.968674] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 3.978268] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 3.987737] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 3.994825] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 4.000963] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 4.007256] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.014121] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.023719] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.033214] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.040252] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.058581] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 4.064869] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 4.071733] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 4.081320] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 4.090819] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 4.097853] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 4.119164] smps9: Bringing 0uV into 2100000-2100000uV [ 4.148351] ldo9: bypassed regulator has no supply! [ 4.153462] ldo9: failed to get the current voltage(-517) [ 4.159147] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.179271] hctosys: unable to open rtc device (rtc0) [ 4.184564] sr_init: No PMIC hook to init smartreflex [ 4.190071] sr_init: platform driver register failed for SR [ 4.217500] pbias_mmc_omap5: disabling [ 4.221466] vmmcsdio_fixed: disabling [ 4.227605] Waiting for root device /dev/mmcblk1p2...
[PYBOOT] [omap5uevm 02:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:04]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:06]: Done.
========================================================================
Board pi-arm-exynos_defconfig failure log: -------------------------------------------------
[ 20.958283] BUG: spinlock lockup suspected on CPU#0, kworker/u16:1/80 [ 20.963235] lock: 0xee73f000, .magic: dead4ead, .owner: kworker/u16:1/80, .owner_cpu: 0 [ 20.971302] CPU: 0 PID: 80 Comm: kworker/u16:1 Tainted: G D 4.7.0-rc2-00300-g3d0f0b6 #1 [ 20.980409] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 20.986492] [<c010dfec>] (unwind_backtrace) from [<c010ad18>] (show_stack+0x10/0x14) [ 20.994207] [<c010ad18>] (show_stack) from [<c03269f8>] (dump_stack+0x78/0x8c) [ 21.001408] [<c03269f8>] (dump_stack) from [<c015994c>] (do_raw_spin_lock+0xfc/0x1d8) [ 21.009215] [<c015994c>] (do_raw_spin_lock) from [<c06d2368>] (__schedule+0x84/0x4b8) [ 21.017022] [<c06d2368>] (__schedule) from [<c06d27e8>] (schedule+0x4c/0xac) [ 21.024048] [<c06d27e8>] (schedule) from [<c011e500>] (do_exit+0x870/0xa34) [ 21.030988] [<c011e500>] (do_exit) from [<c010af54>] (die+0x238/0x2f4) [ 21.037497] [<c010af54>] (die) from [<c0114e84>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 21.045391] [<c0114e84>] (__do_kernel_fault.part.0) from [<c0110894>] (do_bad_area+0x0/0x8c) [ 21.053803] [<c0110894>] (do_bad_area) from [<c01105fc>] (do_page_fault+0x0/0x298) [ 21.061350] [<c01105fc>] (do_page_fault) from [<00000000>] ( (null)) [ 21.067768] Sending NMI to all CPUs: [ 21.071323] NMI backtrace for cpu 0 [ 21.074794] CPU: 0 PID: 80 Comm: kworker/u16:1 Tainted: G D 4.7.0-rc2-00300-g3d0f0b6 #1 [ 21.083902] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 21.089982] [<c010dfec>] (unwind_backtrace) from [<c010ad18>] (show_stack+0x10/0x14) [ 21.097699] [<c010ad18>] (show_stack) from [<c03269f8>] (dump_stack+0x78/0x8c) [ 21.104900] [<c03269f8>] (dump_stack) from [<c032a358>] (nmi_cpu_backtrace+0x78/0x7c) [ 21.112706] [<c032a358>] (nmi_cpu_backtrace) from [<c010c934>] (raise_nmi+0x60/0x64) [ 21.120426] [<c010c934>] (raise_nmi) from [<c032a2d8>] (nmi_trigger_all_cpu_backtrace+0x128/0x130) [ 21.129362] [<c032a2d8>] (nmi_trigger_all_cpu_backtrace) from [<c0159954>] (do_raw_spin_lock+0x104/0x1d8) [ 21.138905] [<c0159954>] (do_raw_spin_lock) from [<c06d2368>] (__schedule+0x84/0x4b8) [ 21.146712] [<c06d2368>] (__schedule) from [<c06d27e8>] (schedule+0x4c/0xac) [ 21.153739] [<c06d27e8>] (schedule) from [<c011e500>] (do_exit+0x870/0xa34) [ 21.160679] [<c011e500>] (do_exit) from [<c010af54>] (die+0x238/0x2f4) [ 21.167186] [<c010af54>] (die) from [<c0114e84>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 21.175080] [<c0114e84>] (__do_kernel_fault.part.0) from [<c0110894>] (do_bad_area+0x0/0x8c) [ 21.183494] [<c0110894>] (do_bad_area) from [<c01105fc>] (do_page_fault+0x0/0x298) [ 21.191040] [<c01105fc>] (do_page_fault) from [<00000000>] ( (null))
[PYBOOT] [pi 01:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:50]: got exception: timeout ~$off
[PYBOOT] [pi 01:52]: Done.
========================================================================
Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.533399] isl29018 7-0044: No cache defaults, reading back from HW [ 1.539750] isl29018 7-0044: Failed to read 1: -6 [ 1.544335] isl29018 7-0044: regmap initialization fails: -6 [ 1.555249] NET: Registered protocol family 10 [ 1.559679] sit: IPv6 over IPv4 tunneling driver [ 1.563256] NET: Registered protocol family 17 [ 1.567260] can: controller area network core (rev 20120528 abi 9) [ 1.573451] NET: Registered protocol family 29 [ 1.577838] can: raw protocol (rev 20120528) [ 1.582087] can: broadcast manager protocol (rev 20120528 t) [ 1.587729] can: netlink gateway (rev 20130117) max_hops=1 [ 1.593452] Key type dns_resolver registered [ 1.597783] ThumbEE CPU extension supported. [ 1.601697] Registering SWP/SWPB emulation handler [ 1.611579] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.617060] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.623426] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.628801] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.638900] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.649220] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.654667] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.664851] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.671033] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.676411] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.686130] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.708752] Waiting for root device /dev/mmcblk0p1... [ 1.712641] mmc0: tuning execution failed: -5 [ 1.716694] mmc0: error -5 whilst initialising MMC card [ 2.583208] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597330] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.602791] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609160] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614544] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 02:06]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 02:07]: got exception: timeout ~$off
[PYBOOT] [pi 02:08]: Done.
========================================================================
Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.538805] isl29018 7-0044: No cache defaults, reading back from HW [ 1.545159] isl29018 7-0044: Failed to read 1: -6 [ 1.549744] isl29018 7-0044: regmap initialization fails: -6 [ 1.560683] NET: Registered protocol family 10 [ 1.565116] sit: IPv6 over IPv4 tunneling driver [ 1.568691] NET: Registered protocol family 17 [ 1.572694] can: controller area network core (rev 20120528 abi 9) [ 1.578885] NET: Registered protocol family 29 [ 1.583273] can: raw protocol (rev 20120528) [ 1.587522] can: broadcast manager protocol (rev 20120528 t) [ 1.593163] can: netlink gateway (rev 20130117) max_hops=1 [ 1.598890] Key type dns_resolver registered [ 1.603218] ThumbEE CPU extension supported. [ 1.607133] Registering SWP/SWPB emulation handler [ 1.617072] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.622554] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.628922] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.634296] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.644403] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.654775] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.660223] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.670409] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.676589] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.681967] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.691688] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.714409] Waiting for root device /dev/mmcblk0p1... [ 1.718290] mmc0: tuning execution failed: -5 [ 1.722345] mmc0: error -5 whilst initialising MMC card [ 2.583590] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597744] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.603199] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609573] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614956] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:59]: got exception: timeout ~$off
[PYBOOT] [pi 02:00]: Done.