Full logs are available at http://arm-soc.lixom.net/bootlogs/arm-soc/v3.18-1786-gd6ad369/
Failed boards:
apc arm-vt8500_v6_v7_defconfig : FAILED 4:50.38 colombus arm-sunxi_defconfig : FAILED 4:31.74 cubox arm-multi_v7_defconfig : FAILED 4:46.27 rk3288evb arm-multi_v7_defconfig : FAILED 1:56.99 rk3288evb arm-multi_lpae_defconfig : FAILED 1:47.50 sama5 arm-sama5_defconfig : FAILED 5:03.88 snow arm-multi_lpae_defconfig : FAILED 2:06.49 wandboard arm-imx_v6_v7_defconfig : FAILED 5:08.12
Successful boards:
arndale arm-exynos_defconfig : passed 5:27.60 arndale arm-multi_lpae_defconfig : passed 1:19.34 beaver arm-tegra_defconfig : passed 1:12.78 chitra powerpc-pasemi_defconfig : passed 0:51.81 chitra powerpc-ppc64_defconfig : passed 1:02.11 colombus arm-multi_lpae_defconfig : passed 1:11.04 cosmic arm-multi_v7_defconfig : passed 1:30.47 cubie arm-sunxi_defconfig : passed 1:02.97 cubie2 arm-sunxi_defconfig : passed 0:58.81 cubie2 arm-multi_lpae_defconfig : passed 1:03.73 cubox arm-mvebu_v7_defconfig : passed 1:49.60 dalmore arm-tegra_defconfig : passed 1:10.71 dalmore arm-multi_lpae_defconfig : passed 1:48.50 hummingboard arm-multi_v7_defconfig : passed 1:54.57 jetsontk1 arm-tegra_defconfig : passed 0:58.42 jetsontk1 arm-multi_lpae_defconfig : passed 0:57.37 minnowmax x86-minnowmax_defconfig : passed 1:17.55 omap5uevm arm-omap2plus_defconfig : passed 1:04.44 omap5uevm arm-multi_lpae_defconfig : passed 1:15.56 pandaes arm-omap2plus_defconfig : warnings 5:35.65 pandaes arm-multi_v7_defconfig : passed 2:29.80 pi arm-multi_v7_defconfig : passed 0:47.01 pi arm-multi_lpae_defconfig : passed 0:44.20 pit arm-multi_v7_defconfig : passed 0:52.91 seaboard arm-tegra_defconfig : passed 5:00.60 snow arm-multi_v7_defconfig : passed 1:10.50 snowball arm-multi_v7_defconfig : passed 2:39.23 socfpga arm-multi_v7_defconfig : passed 1:07.33 trimslice arm-tegra_defconfig : passed 4:56.51 trimslice arm-multi_v7_defconfig : passed 0:59.02 wandboard arm-multi_v7_defconfig : passed 1:47.38
Offline boards:
arndale arm-multi_v7_defconfig : OFFLINE 1:32.25 bbb arm-omap2plus_defconfig : OFFLINE 5:20.73 bbb arm-multi_v7_defconfig : OFFLINE 1:29.96 beaver arm-multi_v7_defconfig : OFFLINE 1:31.16 capri arm-bcm_defconfig : OFFLINE 4:26.85 capri arm-multi_v7_defconfig : OFFLINE 1:30.22 colombus arm-multi_v7_defconfig : OFFLINE 1:29.92 cosmic arm-imx_v6_v7_defconfig : OFFLINE 1:31.64 cubie arm-multi_v7_defconfig : OFFLINE 1:32.18 cubie2 arm-multi_v7_defconfig : OFFLINE 1:31.04 dalmore arm-multi_v7_defconfig : OFFLINE 1:32.26 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 5:50.42 jetsontk1 arm-multi_v7_defconfig : OFFLINE 1:30.74 odroidu3 arm-exynos_defconfig : OFFLINE 1:29.78 omap5uevm arm-multi_v7_defconfig : OFFLINE 4:56.23 parallella arm-multi_v7_defconfig : OFFLINE 1:32.64 pi arm-exynos_defconfig : OFFLINE 5:36.39 pit arm-exynos_defconfig : OFFLINE 4:55.12 pit arm-multi_lpae_defconfig : OFFLINE 1:28.89 seaboard arm-multi_v7_defconfig : OFFLINE 1:28.28 snow arm-exynos_defconfig : OFFLINE 4:23.15 snowball arm-u8500_defconfig : OFFLINE 5:20.64 socfpga arm-socfpga_defconfig : OFFLINE 1:27.43
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board apc-arm-vt8500_v6_v7_defconfig failure log: -------------------------------------------------
[ 0.800000] wmt-sdhc d800a000.sdhc: Initial signal voltage of 3.3v [ 0.830000] mmc0: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0 [ 0.850000] wmt-sdhc d800a000.sdhc: WMT SDHC Controller initialized [ 0.850000] usbcore: registered new interface driver usbhid [ 0.860000] usbhid: USB HID core driver [ 0.860000] TCP: cubic registered [ 0.860000] NET: Registered protocol family 10 [ 0.870000] sit: IPv6 over IPv4 tunneling driver [ 0.870000] Key type dns_resolver registered [ 0.880000] mmc0: clock 0Hz busmode 2 powermode 0 cs 0 Vdd 0 width 0 timing 0 [ 0.880000] vt8500-rtc d8100000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (9466[ 0.890000] Waiting for root device /dev/sda1... [ 1.030000] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 1.180000] usb-storage 1-1:1.0: USB Mass Storage device detected [ 1.190000] scsi host0: usb-storage 1-1:1.0 [ 2.230000] scsi 0:0:0:0: Direct-Access Patriot Memory PMAP PQ: 0 ANSI: 0 CCS [ 4.790000] sd 0:0:0:0: [sda] 15646720 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 4.800000] sd 0:0:0:0: [sda] Write Protect is off [ 4.800000] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00 [ 4.810000] sd 0:0:0:0: [sda] No Caching mode page found [ 4.820000] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 4.870000] sda: sda1 [ 4.880000] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 4.890000] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 5.200000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 5.210000] VFS: Mounted root (ext3 filesystem) on device 8:1. [ 5.230000] devtmpfs: mounted [ 5.230000] Freeing unused kernel memory: 144K (c0442000 - c0466000)
[PYBOOT] [apc 00:36]: kernel: finished booting, starting userspace. version 2[[36minfo[39;49m] Using makefile-style concurrent boot in runlevel S. [....] Starting the hotplug events dispatcher: udevd[ 7.260000] udevd[143]: starting version 175 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Synthesizing the initial hotplug events...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone.
[PYBOOT] [apc 03:06]: Timed out waiting for "<type 'str'>":
[PYBOOT] [apc 03:07]: got exception: timeout ~$off
[PYBOOT] [apc 04:49]: Done.
========================================================================
Board colombus-arm-sunxi_defconfig failure log: -------------------------------------------------
bulk_ep_size = 0x200 fifo_size = 0x200 Fastboot entered mp/colIRQ: suspend ombus-NqU25yIRQ: reset /zImageoNH1GIRQ: reset _address:88, speed:3, bulk_ep_size:512, fifo_size:512 usb enter high speed SetAddress: 88 fastboot_bulk_endpoint_reset usb_base = 0x1c19000 sram_base = 0x1c00000 ccmu_base = 0x1c20000 address = 0x58 speed = 0x3 bulk_ep_size = 0x200 fifo_size = 0x200
(user:build) Load fastboot kernel creating boot image... creating boot image - 2656256 bytes downloading 'boot.img'... download FastBot:Starting download of 2 MB Downloading 0 MB ...Downloading 0 MB ...Downloading 0 MB ...Downloading 1 MB ...Downloading 1 MB ...Downloading 1 MB ...Downloading 2 MB ...OKAY [ 0.821s] booting... OKAY [ 0.005s] finished. total time: 0.827s
downloading of 2 MB finished Downloading 2 MB ...boot Booting raw image.. ## Starting application at 0x41000800 ...
[PYBOOT] [colombus 00:54]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 00:55]: got exception: timeout ~$off
[PYBOOT] [colombus 04:30]: Done.
========================================================================
Board cubox-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.481010] ThumbEE CPU extension supported. [ 1.485295] Registering SWP/SWPB emulation handler [ 1.490084] PJ4 iWMMXt v2 coprocessor enabled. [ 1.500214] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-12-17 11:11:02 UTC (1418814662) [ 1.510864] ALSA device list: [ 1.513849] No soundcards found. [ 1.517784] Waiting for root device /dev/mmcblk0p2... [ 1.663012] mmc0: new high speed SDHC card at address e624 [ 1.668857] mmcblk0: mmc0:e624 SU04G 3.69 GiB [ 1.682987] mmcblk0: p1 p2 [ 1.737150] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 1.745893] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 1.771240] EXT4-fs (mmcblk0p2): warning: maximal mount count reached, running e2fsck is recommended [ 1.797338] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.805434] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 1.817144] devtmpfs: mounted [ 1.820759] Freeing unused kernel memory: 740K (c0c530 [PYBOOT] [cubox 00:31]: kernel: finished booting, starting userspace. 00 - c0d0c000) INIT: version 2.88 booting [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel S. [....] Starting the hotplug events dispatcher: udevd[ 2.627877] udevd[161]: starting version 175 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Synthesizing the initial hotplug events...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 4.695108] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone.
[PYBOOT] [cubox 03:01]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cubox 03:02]: got exception: timeout ~$off
[PYBOOT] [cubox 04:44]: Done.
========================================================================
Board rk3288evb-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.106335] USB Video Class driver (1.1.1) [ 1.110428] gspca_main: v2.14.0 registered [ 1.118932] Driver 'mmcblk' needs updating - please use bus_type methods [ 1.126144] sdhci: Secure Digital Host Controller Interface driver [ 1.132377] sdhci: Copyright(c) Pierre Ossman [ 1.139791] Synopsys Designware Multimedia Card Interface Driver [ 1.148989] dwmmc_rockchip ff0c0000.dwmmc: IDMAC supports 32-bit address mode. [ 1.156661] dwmmc_rockchip ff0c0000.dwmmc: Using internal DMA controller. [ 1.163569] dwmmc_rockchip ff0c0000.dwmmc: Version ID is 270a [ 1.169456] dwmmc_rockchip ff0c0000.dwmmc: DW MMC controller at irq 64, 32 bit host data width, 256 deep fifo [ 1.179543] dwmmc_rockchip ff0c0000.dwmmc: No vmmc regulator found [ 1.185798] dwmmc_rockchip ff0c0000.dwmmc: No vqmmc regulator found [ 1.206134] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 1.226016] dwmmc_rockchip ff0c0000.dwmmc: 1 slots initialized [ 1.232184] dwmmc_rockchip ff0f0000.dwmmc: IDMAC supports 32-bit address mode. [ 1.239451] dwmmc_rockchip ff0f0000.dwmmc: Using internal DMA controller. [ 1.246244] dwmmc_rockchip ff0f0000.dwmmc: Version ID is 270a [ 1.252003] dwmmc_rockchip ff0f0000.dwmmc: DW MMC controller at irq 67, 32 bit host data width, 256 deep fifo [ 1.261925] dwmmc_rockchip ff0f0000.dwmmc: No vmmc regulator found [ 1.268103] dwmmc_rockchip ff0f0000.dwmmc: No vqmmc regulator found [ 1.271491] mmc0: card lacks mandatory switch function, performance might suffer [ 1.271512] mmc_host mmc0: Bus speed (slot 0) = 24750000Hz (slot req 25000000Hz, actual 24750000HZ div = 0) [ 1.271563] mmc0: new SD card at address b368 [ 1.271811] mmcblk0: mmc0:b368 SMI-S 1.00 GiB [ 1.272657] mmcblk0: unknown partition table [ 1.315999] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 1.335989] dwmmc_rockchip ff0f0000.dwmmc: 1 slots initialized [ 1.342004] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.348133] ledtrig-cpu: registered to indicate activity on CPUs [ 1.354248] usbcore: registered new interface driver usbhid [ 1.359814] usbhid: USB HID core driver [ 1.364708] usbcore: registered new interface driver snd-usb-audio [ 1.372011] TCP: cubic registered [ 1.37 [PYBOOT] [rk3288evb 01:44]: Timed out waiting for "<type 'str'>":
[PYBOOT] [rk3288evb 01:45]: got exception: timeout ~$off
[PYBOOT] [rk3288evb 01:46]: Done.
========================================================================
Board rk3288evb-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.324705] usbcore: registered new interface driver usbhid [ 1.330271] usbhid: USB HID core driver [ 1.335345] usbcore: registered new interface driver snd-usb-audio [ 1.342795] TCP: cubic registered [ 1.346121] NET: Registered protocol family 17 [ 1.350572] can: controller area network core (rev 20120528 abi 9) [ 1.356784] NET: Registered protocol family 29 [ 1.361231] can: raw protocol (rev 20120528) [ 1.365497] can: broadcast manager protocol (rev 20120528 t) [ 1.365989] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 1.378112] can: netlink gateway (rev 20130117) max_hops=1 [ 1.379909] mmc_host mmc0: Bus speed (slot 0) = 49500000Hz (slot req 50000000Hz, actual 49500000HZ div = 0) [ 1.379946] mmc0: new high speed SDHC card at address b368 [ 1.380148] mmcblk0: mmc0:b368 00000 7.51 GiB [ 1.381575] mmcblk0: p1 p2 p3 [ 1.406530] Key type dns_resolver registered [ 1.410873] ThumbEE CPU extension supported. [ 1.415157] Registering SWP/SWPB emulation handler [ 1.421135] backlight supply power not found, using dummy regulator [ 1.423619] mmc1: BKOPS_EN bit is not set [ 1.424979] mmc_host mmc1: Bus speed (slot 0) = 49500000Hz (slot req 52000000Hz, actual 49500000HZ div = 0) [ 1.425237] mmc1: new high speed MMC card at address 0001 [ 1.425784] mmcblk1: mmc1:0001 M8G1GC 7.28 GiB [ 1.425965] mmcblk1boot0: mmc1:0001 M8G1GC partition 1 4.00 MiB [ 1.426170] mmcblk1boot1: mmc1:0001 M8G1GC partition 2 4.00 MiB [ 1.431031] mmcblk1: p1 [ 1.465585] pwm-backlight backlight: unable to request PWM, trying legacy API [ 1.472751] pwm-backlight backlight: unable to request legacy PWM [ 1.478955] platform backlight: Driver pwm-backlight requests probe deferral [ 1.487395] backlight supply power not found, using dummy regulator [ 1.493764] pwm-backlight backlight: unable to request PWM, trying legacy API [ 1.500923] pwm-backlight backlight: unable to request legacy PWM [ 1.507123] platform backlight: Driver pwm-backlight requests probe deferral [ 1.516370] input: gpio-keys as /devices/gpio-keys/inpu [PYBOOT] [rk3288evb 01:54]: Timed out waiting for "<type 'str'>":
[PYBOOT] [rk3288evb 01:55]: got exception: timeout ~$off
[PYBOOT] [rk3288evb 01:56]: Done.
========================================================================
Board sama5-arm-sama5_defconfig failure log: -------------------------------------------------
iio iio:device0: Resolution used: 12 bits iio iio:device0: ADC Touch screen is disabled. TCP: cubic registered NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 input: gpio_keys as /devices/gpio_keys/input/input0 at91_rtc fffffeb0.rtc: setting system clock to 2007-01-01 00:00:15 UTC (1167609615) ALSA device list: No soundcards found. Waiting for root device /dev/mmcblk0p1... mmc1: host does not support reading read-only switch, assuming write-enable mmc1: new high speed SDHC card at address 2ff5 mmcblk0: mmc1:2ff5 SD04G 3.69 GiB mmcblk0: p1 EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (mmcblk0p1): mounting ext2 file system using the ext4 subsystem EXT4-fs (mmcblk0p1): warning: mounting unchecked fs, running e2fsck is recommended EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (null) VFS: Mounted root (ext2 filesystem) on device 179:1. devtmpfs: mounted Freeing unused kernel memory: 188K [PYBOOT] [sama5 00:25]: kernel: finished booting, starting userspace. (c05db000 - c060a000) INIT: version 2.88 booting [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel S. [....] CONFIG_SYSFS_DEPRECATED must not be selected ...[?25l[?1c7[1G[[33mwarn[39;49m8[?25h[?0c [33m(warning).[39;49m [....] Booting will continue in 30 seconds but many things will be broken ...[?25l[?1c7[1G[[33mwarn[39;49m8[?25h[?0c [33m(warning).[39;49m
[PYBOOT] [sama5 02:55]: Timed out waiting for "<type 'str'>":
[PYBOOT] [sama5 02:56]: got exception: timeout ~$off
[PYBOOT] [sama5 02:57]: Done.
========================================================================
Board snow-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.565826] dwmmc_exynos 12230000.mmc: 1 slots initialized [ 1.566764] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.568830] ledtrig-cpu: registered to indicate activity on CPUs [ 1.569071] usbcore: registered new interface driver usbhid [ 1.569073] usbhid: USB HID core driver [ 1.577044] usbcore: registered new interface driver snd-usb-audio [ 1.581357] TCP: cubic registered [ 1.581369] NET: Registered protocol family 17 [ 1.581392] can: controller area network core (rev 20120528 abi 9) [ 1.581476] NET: Registered protocol family 29 [ 1.581489] can: raw protocol (rev 20120528) [ 1.581498] can: broadcast manager protocol (rev 20120528 t) [ 1.581515] can: netlink gateway (rev 20130117) max_hops=1 [ 1.582026] Key type dns_resolver registered [ 1.582308] ThumbEE CPU extension supported. [ 1.582329] Registering SWP/SWPB emulation handler [ 1.584418] platform backlight: Driver pwm-backlight requests probe deferral [ 1.586353] input: gpio-keys as /devices/gpio-keys/input/input0 [ 1.586441] gsc-power-domain: Power-off latency exceeded, new value 1261666 ns [ 1.586455] mfc-power-domain: Power-off latency exceeded, new value 1336000 ns [ 1.587311] platform backlight: Driver pwm-backlight requests probe deferral [ 1.696798] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:32 UTC (946688432) [ 1.706705] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 1.716363] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1) [ 1.725087] P5.0V_USB3CON: disabling [ 1.725095] vbat-supply: disabling [ 1.732465] mmc0: new DDR MMC card at address 0001 [ 1.737033] mmcblk0: mmc0:0001 SEM16G 14.6 GiB [ 1.741391] mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB [ 1.747289] mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB [ 1.753191] mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB [ 1.762285] mmcblk0: p2 p3 [ 1.764982] platform backlight: Driver pwm-backlight requests probe deferral
[PYBOOT] [snow 02:02]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snow 02:03]: got exception: timeout ~$off
[PYBOOT] [snow 02:05]: Done.
========================================================================
Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
CPU variant : 0x2 CPU part : 0xc09 CPU revision : 10
processor : 1 model name : ARMv7 Processor rev 10 (v7l) Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpd32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x2 CPU part : 0xc09 CPU revision : 10
processor : 2 model name : ARMv7 Processor rev 10 (v7l) Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpd32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x2 CPU part : 0xc09 CPU revision : 10
processor : 3 model name : ARMv7 Processor rev 10 (v7l) Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpd32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x2 CPU part : 0xc09 CPU revision : 10
Hardware : Freescale i.MX6 Quad/DualLite (Device Tree) Revision : 0000 Serial : 0000000000000000 root@wandboard:~# ip -f inet -o addr
[PYBOOT] [wandboard 01:30]: got exception: ERROR: Timeout waiting for command: ip -f inet -o addr. ~$off
[PYBOOT] [wandboard 05:06]: Done.