Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.0-624-gcb0fc55/
Failed boards:
minnowmax x86-minnowmax_defconfig : FAILED 0:48.53 snowball arm-u8500_defconfig : FAILED 2:48.59 socfpga arm-multi_v7_defconfig : FAILED 3:04.32 wandboard arm-multi_v7_defconfig : FAILED 3:05.13
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:15.71 arndale arm-exynos_defconfig : passed 1:24.26 bbb arm-omap2plus_defconfig : passed 1:35.37 bbb arm-multi_v7_defconfig : passed 1:22.53 beaver arm-tegra_defconfig : passed 0:56.12 beaver arm-multi_v7_defconfig : passed 1:00.18 capri arm-bcm_defconfig : passed 0:40.53 capri arm-multi_v7_defconfig : passed 0:43.53 chitra powerpc-pasemi_defconfig : passed 1:05.80 chitra powerpc-ppc64_defconfig : warnings 2:17.34 colombus arm-sunxi_defconfig : passed 1:00.48 colombus arm-multi_v7_defconfig : passed 1:17.86 colombus arm-multi_lpae_defconfig : passed 1:06.98 cosmic arm-imx_v6_v7_defconfig : passed 1:53.74 cosmic arm-multi_v7_defconfig : passed 1:34.94 cubie arm-sunxi_defconfig : passed 0:56.95 cubie arm-multi_v7_defconfig : passed 1:06.91 cubie2 arm-sunxi_defconfig : passed 1:00.35 cubie2 arm-multi_v7_defconfig : passed 1:04.55 cubie2 arm-multi_lpae_defconfig : passed 1:04.37 cubox arm-multi_v7_defconfig : passed 1:15.97 cubox arm-mvebu_v7_defconfig : passed 1:08.72 dalmore arm-multi_v7_defconfig : passed 1:24.51 dalmore arm-multi_lpae_defconfig : passed 1:20.06 hummingboard arm-imx_v6_v7_defconfig : passed 1:31.80 hummingboard arm-multi_v7_defconfig : passed 1:17.74 jetsontk1 arm-tegra_defconfig : passed 0:55.76 jetsontk1 arm-multi_v7_defconfig : passed 0:57.65 jetsontk1 arm-multi_lpae_defconfig : passed 1:06.64 odroidu3 arm-exynos_defconfig : passed 0:56.94 omap5uevm arm-omap2plus_defconfig : passed 1:02.22 omap5uevm arm-multi_v7_defconfig : passed 1:12.06 omap5uevm arm-multi_lpae_defconfig : passed 1:19.17 pandaes arm-omap2plus_defconfig : warnings 1:33.05 pandaes arm-multi_v7_defconfig : passed 1:35.94 pi arm-exynos_defconfig : passed 0:52.65 pi arm-multi_v7_defconfig : passed 0:54.33 pi arm-multi_lpae_defconfig : passed 1:16.65 pit arm-exynos_defconfig : passed 0:52.04 pit arm-multi_v7_defconfig : passed 0:54.67 pit arm-multi_lpae_defconfig : passed 1:01.70 rk3288evb arm-multi_v7_defconfig : passed 1:04.32 rk3288evb arm-multi_lpae_defconfig : passed 0:59.52 sama5 arm-sama5_defconfig : passed 1:18.99 seaboard arm-tegra_defconfig : passed 0:59.00 seaboard arm-multi_v7_defconfig : passed 1:05.16 snow arm-exynos_defconfig : passed 1:39.71 snowball arm-multi_v7_defconfig : passed 1:37.63 socfpga arm-socfpga_defconfig : passed 1:23.91 trimslice arm-tegra_defconfig : passed 0:53.58 trimslice arm-multi_v7_defconfig : passed 1:43.22 wandboard arm-imx_v6_v7_defconfig : passed 1:12.05
Offline boards:
arndale arm-multi_v7_defconfig : OFFLINE 1:19.66 arndale arm-multi_lpae_defconfig : OFFLINE 1:05.94 dalmore arm-tegra_defconfig : OFFLINE 2:13.48 parallella arm-multi_v7_defconfig : OFFLINE 1:25.56 snow arm-multi_v7_defconfig : OFFLINE 0:51.52 snow arm-multi_lpae_defconfig : OFFLINE 0:41.54
Board legend is available at http://arm-soc.lixom.net/boards.html
Board minnowmax-x86-minnowmax_defconfig failure log: -------------------------------------------------
Connected to minnowmax console [channel connected] (~$quit to exit)~$open
~$hardreset
Command(minnowmax console)> open console already open
Command(minnowmax console)> hardreset (user:build) Reset target node minnowmax status: off node minnowmax status: on
[PYBOOT] [minnowmax 00:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [minnowmax 00:46]: got exception: timeout ~$off
[PYBOOT] [minnowmax 00:48]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 1.275024] musb-hdrc: 28/31 max ep, 8192/262144 memory [ 1.280334] musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver [ 1.286163] musb-hdrc musb-hdrc.0.auto: new USB bus registered, assigned bus number 1 [ 1.294708] hub 1-0:1.0: USB hub found [ 1.298492] hub 1-0:1.0: 1 port detected [ 1.341491] mousedev: PS/2 mouse device common for all mice [ 1.347930] input: AB8500 POn(PowerOn) Key as /devices/soc0/soc/db8500-prcmu/ab8500-core.0/ab8500-poweron-key.0/input/input0 [ 1.371276] ab8500-rtc ab8500-rtc.0: rtc core: registered ab8500-rtc as rtc0 [ 1.378875] rtc-pl031 80154000.rtc: rtc core: registered pl031 as rtc1 [ 1.386260] db8500-thermal db8500-thermal.0: Thermal zone device registered. [ 1.393615] genirq: Flags mismatch irq 342. 00006000 (dbx500_temp_low) vs. 00006000 (dbx500_temp_low) [ 1.402923] db8500-thermal 801573c0.thermal: Failed to allocate temp low irq. [ 1.410064] db8500-thermal: probe of 801573c0.thermal failed with error -16 [ 1.417602] ux500_wdt ux500_wdt: initialized [ 1.422119] dbx500-cpufreq: Available frequencies: [ 1.426910] 200 Mhz [ 1.429168] 400 Mhz [ 1.431488] 800 Mhz [ 1.433746] 1000 Mhz [ 1.436157] cpufreq: __cpufreq_add_dev: CPU0: Running at unlisted freq: 998400 KHz [ 1.444061] cpufreq: __cpufreq_add_dev: CPU0: Unlisted initial frequency changed to: 1000000 KHz [ 1.454864] Driver 'mmcblk' needs updating - please use bus_type methods [ 1.464477] mmci-pl18x 80126000.sdi0_per1: Got CD GPIO [ 1.470520] mmci-pl18x 80126000.sdi0_per1: mmc0: PL180 manf 80 rev4 at 0x80126000 irq 402,0 (pio) [ 1.479797] mmci-pl18x 80126000.sdi0_per1: DMA channels RX dma0chan6, TX dma0chan7 [ 1.525238] mmci-pl18x 80118000.sdi1_per2: No vmmc regulator found [ 1.531524] mmci-pl18x 80118000.sdi1_per2: No vqmmc regulator found [ 1.537994] mmci-pl18x 80118000.sdi1_per2: mmc1: PL180 manf 80 rev4 at 0x80118000 irq 403,0 (pio) [ 1.546997] mmci-pl18x 80118000.sdi1_per2: DMA channels RX dma0chan8, TX dma0chan9 [ 1.603118] mmci-pl18x 80005000.sdi2_per3: No vmmc regulator found [ 1.609405] mmci-pl18x 80005000.sdi2_per3: No vqmmc regulator found [ 1.615936] mmci-pl18x 80005000.sdi2_per3: mmc2: PL180 manf 80 rev4 at 0x80005000 irq 404,0 (pio) [ 1.624938] mmci-pl18x 80005000.sdi2_per3: DMA channels RX dma0chan10, TX dma0chan11
[PYBOOT] [snowball 02:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:46]: got exception: timeout ~$off
[PYBOOT] [snowball 02:48]: Done. Board socfpga-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.200813] dw_mmc ff704000.dwmmc0: DW MMC controller at irq 30, 32 bit host data width, 1024 deep fifo [ 1.210296] dw_mmc ff704000.dwmmc0: Got CD GPIO [ 1.242392] dw_mmc ff704000.dwmmc0: 1 slots initialized [ 1.248142] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.254505] ledtrig-cpu: registered to indicate activity on CPUs [ 1.260695] usbcore: registered new interface driver usbhid [ 1.266256] usbhid: USB HID core driver [ 1.272073] usbcore: registered new interface driver snd-usb-audio [ 1.280092] TCP: cubic registered [ 1.283428] NET: Registered protocol family 17 [ 1.287880] can: controller area network core (rev 20120528 abi 9) [ 1.294106] NET: Registered protocol family 29 [ 1.298553] can: raw protocol (rev 20120528) [ 1.302819] can: broadcast manager protocol (rev 20120528 t) [ 1.308471] can: netlink gateway (rev 20130117) max_hops=1 [ 1.314281] Key type dns_resolver registered [ 1.318658] ThumbEE CPU extension supported. [ 1.322934] Registering SWP/SWPB emulation handler [ 1.329678] rtc-ds1307 0-0068: setting system clock to 2000-01-01 00:00:22 UTC (946684822) [ 1.339752] ALSA device list: [ 1.342743] No soundcards found. [ 1.346776] Waiting for root device /dev/mmcblk0p2... [ 1.375877] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 50000000Hz, actual 50000000HZ div = 2) [ 1.385733] mmc0: new high speed SDHC card at address 0002 [ 1.391529] mmcblk0: mmc0:0002 SD8GB 7.43 GiB [ 1.398510] mmcblk0: p1 p2 p3 [ 1.453916] EXT4-fs (mmcblk0p2): mounting ext3 file system using the ext4 subsystem [ 1.491721] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.499824] VFS: Mounted root (ext3 filesystem) readonly on device 179:2. [ 1.533582] devtmpfs: mounted [ 1.537133] Freeing unused kernel memory: 808K (c0d40000 [PYBOOT] [socfpga 00:31]: kernel: finished booting, starting userspace. - c0e0a000)
[PYBOOT] [socfpga 03:01]: Timed out waiting for "<type 'str'>":
[PYBOOT] [socfpga 03:02]: got exception: timeout ~$off
[PYBOOT] [socfpga 03:03]: Done. Board wandboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 3.587513] EXT4-fs (mmcblk0p2): warning: mounting fs with errors, running e2fsck is recommended [ 3.605447] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 5.951851] random: dd urandom read with 46 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
[ 6.378578] fec 2188000.ethernet eth0: Freescale FEC PHY driver [Atheros 8031 ethernet] (mii_bus:phy_addr=2188000.ethernet:01, irq=-1) Listening on LPF/eth0/00:1f:7b:b4:05:0e Sending on LPF/eth0/00:1f:7b:b4:05:0e Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 [ 10.378490] fec 2188000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPOFFER from 172.16.1.1 DHCPACK from 172.16.1.1 bound to 172.16.1.149 -- renewal in 1740 seconds. [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. INIT: Entering runlevel: 2 [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting web server: apache2 [PYBOOT] [wandboard 03:02]: Timed out waiting for "<type 'str'>":
[PYBOOT] [wandboard 03:03]: got exception: timeout ~$off
[PYBOOT] [wandboard 03:04]: Done.