Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.6/
Failed boards:
arndale multi_v7_nosmp_defconfig : NO BUILD bbb arm-omap2plus_defconfig : FAILED 1:53.79 bbb arm-multi_v7_defconfig : FAILED 2:07.92 bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:47.48 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:42.73 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:52.79 beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD chitra powerpc-pasemi_defconfig : BUILD FAILED colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.75 cosmic arm-multi_v7_defconfig : FAILED 2:17.53 cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore arm-tegra_defconfig : FAILED 1:47.68 dalmore arm-multi_v7_defconfig : FAILED 2:15.57 dalmore arm-multi_lpae_defconfig : FAILED 2:00.35 dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:52.74 omap5uevm arm-multi_v7_defconfig : FAILED 2:13.48 omap5uevm arm-multi_lpae_defconfig : FAILED 0:51.68 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-multi_v7_defconfig : FAILED 1:59.60 pi arm-multi_lpae_defconfig : FAILED 1:50.81 pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard arm-tegra_defconfig : FAILED 1:49.48 seaboard arm-multi_v7_defconfig : FAILED 1:50.81 seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball arm-u8500_defconfig : FAILED 1:57.85 snowball arm-multi_v7_defconfig : FAILED 2:07.38 snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard multi_v7_nosmp_defconfig : NO BUILD
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:08.32 arndale arm-exynos_defconfig : passed 1:32.44 arndale arm-multi_v7_defconfig : passed 1:24.73 arndale arm-multi_lpae_defconfig : passed 1:22.14 capri arm-bcm_defconfig : passed 0:54.93 capri arm-multi_v7_defconfig : passed 0:55.44 chitra powerpc-ppc64_defconfig : passed 2:03.33 colombus arm-sunxi_defconfig : passed 2:32.21 colombus arm-multi_v7_defconfig : passed 2:32.18 colombus arm-multi_lpae_defconfig : passed 2:27.08 cubie arm-sunxi_defconfig : passed 0:52.02 cubie arm-multi_v7_defconfig : passed 0:49.57 cubie2 arm-sunxi_defconfig : passed 0:50.96 cubie2 arm-multi_v7_defconfig : passed 0:55.95 cubie2 arm-multi_lpae_defconfig : passed 0:58.24 cubox arm-multi_v7_defconfig : passed 1:14.22 cubox arm-mvebu_v7_defconfig : passed 1:08.75 hummingboard arm-imx_v6_v7_defconfig : passed 1:29.38 hummingboard arm-multi_v7_defconfig : passed 1:21.77 jetsontk1 arm-tegra_defconfig : passed 2:10.59 jetsontk1 arm-multi_v7_defconfig : passed 1:42.16 jetsontk1 arm-multi_lpae_defconfig : passed 1:30.89 omap5uevm arm-omap2plus_defconfig : passed 1:03.72 pandaes arm-omap2plus_defconfig : warnings 1:41.24 pandaes arm-multi_v7_defconfig : passed 1:45.72 pi arm-exynos_defconfig : passed 2:12.42 pit arm-exynos_defconfig : passed 2:11.57 pit arm-multi_v7_defconfig : passed 2:15.60 pit arm-multi_lpae_defconfig : passed 2:21.01 seattle arm64-defconfig : warnings 2:19.98 snow arm-exynos_defconfig : passed 2:05.42 snow arm-multi_v7_defconfig : passed 2:00.16 snow arm-multi_lpae_defconfig : passed 1:59.03 trimslice arm-tegra_defconfig : passed 1:31.48 wandboard arm-imx_v6_v7_defconfig : passed 1:17.22 wandboard arm-multi_v7_defconfig : passed 1:19.72
Offline boards:
beaver arm-tegra_defconfig : OFFLINE 2:11.13 beaver arm-multi_v7_defconfig : OFFLINE 2:20.56 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 2:12.16 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 2:26.86 parallella arm-multi_v7_defconfig : OFFLINE 2:20.84 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:49.00 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:59.40 sama5 arm-sama5_defconfig : OFFLINE 2:22.66 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:13.52 socfpga arm-socfpga_defconfig : OFFLINE 2:16.36 socfpga arm-multi_v7_defconfig : OFFLINE 2:17.70 trimslice arm-multi_v7_defconfig : OFFLINE 2:23.01
Board legend is available at http://arm-soc.lixom.net/boards.html
Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.626761] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.637081] ledtrig-cpu: registered to indicate activity on CPUs [ 1.644168] usbcore: registered new interface driver usbhid [ 1.650083] usbhid: USB HID core driver [ 1.662117] NET: Registered protocol family 10 [ 1.668701] sit: IPv6 over IPv4 tunneling driver [ 1.674851] NET: Registered protocol family 17 [ 1.679621] can: controller area network core (rev 20120528 abi 9) [ 1.686256] NET: Registered protocol family 29 [ 1.690976] can: raw protocol (rev 20120528) [ 1.695498] can: broadcast manager protocol (rev 20120528 t) [ 1.701495] can: netlink gateway (rev 20130117) max_hops=1 [ 1.708241] Key type dns_resolver registered [ 1.713141] omap_voltage_late_init: Voltage driver support not added [ 1.721418] ThumbEE CPU extension supported. [ 1.726052] Registering SWP/SWPB emulation handler [ 1.768222] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.774756] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.782531] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.791222] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.799135] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.806954] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.814780] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.822134] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.830801] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 550000 KHz [ 1.838711] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz [ 1.848436] mmc1: new high speed MMC card at address 0001 [ 1.855681] hctosys: unable to open rtc device (rtc0) [ 1.868701] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.874719] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.881780] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.890724] mmcblk1: p1 p2 [ 1.896453] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 02:05]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 02:06]: got exception: timeout ~$off
[PYBOOT] [bbb 02:07]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.057922] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.064058] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.070403] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.077297] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.086918] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.096445] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.103482] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.146643] ledtrig-cpu: registered to indicate activity on CPUs [ 2.155368] oprofile: using arm/armv7 [ 2.160467] Initializing XFRM netlink socket [ 2.165552] NET: Registered protocol family 10 [ 2.176301] sit: IPv6 over IPv4 tunneling driver [ 2.185063] NET: Registered protocol family 17 [ 2.189999] NET: Registered protocol family 15 [ 2.195242] Key type dns_resolver registered [ 2.200164] omap_voltage_late_init: Voltage driver support not added [ 2.206923] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.215415] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.225688] ThumbEE CPU extension supported. [ 2.230335] Registering SWP/SWPB emulation handler [ 2.235367] SmartReflex Class3 initialized [ 2.307610] mmc1: new high speed MMC card at address 0001 [ 2.319791] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.329929] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.341538] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.348850] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.356616] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.370872] mmcblk1: p1 p2 [ 2.378982] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.387318] hctosys: unable to open rtc device (rtc0) [ 2.392634] sr_init: No PMIC hook to init smartreflex [ 2.398397] sr_init: platform driver register failed for SR [ 2.452416] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:52]: got exception: timeout ~$off
[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.717572] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.724656] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.750743] rtc-ds1307 2-006f: SET TIME! [ 1.756501] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.763253] rtc-ds1307 2-006f: 64 bytes nvram [ 1.767872] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.776070] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.781864] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.790113] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.799291] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.806173] hub 1-0:1.0: USB hub found [ 1.810132] hub 1-0:1.0: 1 port detected [ 1.814540] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.820319] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.828438] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.837463] hub 2-0:1.0: USB hub found [ 1.841435] hub 2-0:1.0: 1 port detected [ 1.847467] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.881363] vdd_3v3: supplied by regen1 [ 1.919748] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.936683] aic_dvdd_fixed: disabling [ 1.941279] Waiting for root device /dev/mmcblk0p1... [ 1.968343] mmc1: new high speed MMC card at address 0001 [ 1.974324] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.979207] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.985547] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.992405] mmcblk1: p1 [ 2.120246] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.155271] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.180549] hub 2-1:1.0: USB hub found [ 2.184529] hub 2-1:1.0: 4 ports detected [ 2.276572] hub 1-1:1.0: USB hub found [ 2.280561] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:50]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:51]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:52]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.718090] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.725171] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.750734] rtc-ds1307 2-006f: SET TIME! [ 1.756548] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.763302] rtc-ds1307 2-006f: 64 bytes nvram [ 1.767913] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.776129] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.781914] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.790155] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.799317] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.806202] hub 1-0:1.0: USB hub found [ 1.810151] hub 1-0:1.0: 1 port detected [ 1.814555] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.820337] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.828449] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.837459] hub 2-0:1.0: USB hub found [ 1.841430] hub 2-0:1.0: 1 port detected [ 1.847448] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.881336] vdd_3v3: supplied by regen1 [ 1.920763] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.938415] aic_dvdd_fixed: disabling [ 1.943171] Waiting for root device /dev/mmcblk0p1... [ 1.962290] mmc1: new high speed MMC card at address 0001 [ 1.968260] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.973149] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.979488] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.986350] mmcblk1: p1 [ 2.120222] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.155250] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.180554] hub 2-1:1.0: USB hub found [ 2.184530] hub 2-1:1.0: 4 ports detected [ 2.276576] hub 1-1:1.0: USB hub found [ 2.280565] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:40]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:41]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:42]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.174190] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.181055] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.191449] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.196320] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.202613] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.209480] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.219079] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.228577] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.235643] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.283767] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.290070] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.296939] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.306536] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.316041] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.323094] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.329212] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.335529] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.342377] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.351967] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.361465] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.368505] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.375200] vdd_3v3: supplied by regen1 [ 2.413993] hctosys: unable to open rtc device (rtc0) [ 2.419310] sr_init: No PMIC hook to init smartreflex [ 2.424862] sr_init: platform driver register failed for SR [ 2.473073] aic_dvdd_fixed: disabling [ 2.477270] ldousb: disabling [ 2.480488] mmc1: new high speed MMC card at address 0001 [ 2.488545] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.493990] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.500839] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.509262] mmcblk1: p1 [ 2.516548] Waiting for root device /dev/mmcblk0p1...
[PYBOOT] [beagleboard-x15 01:44]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:45]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:47]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 14.458234] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.532483] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.542804] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.617052] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.627370] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.701621] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.711949] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.786140] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.796464] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.870708] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.881029] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.955217] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.965538] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.039802] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.050161] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.124458] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.134777] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.209016] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.219329] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.293510] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.303856] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.378186] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.388507] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.462742] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.473062] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.547308] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.557634] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.631877] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.642194] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.716438] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.726756] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.800995] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.811320] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 14.084703] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.158690] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.168763] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.242744] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.252824] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.326803] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.336884] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.410916] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.420981] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.494964] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.505048] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.579037] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.589102] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.663090] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.673163] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.747151] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.757222] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.831211] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.841297] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.915289] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.925358] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.999347] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.009420] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.083402] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.093478] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.167459] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.177540] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.251517] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.261590] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.335575] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.345650] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.419629] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.429711] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:14]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:15]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:16]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.497254] Key type dns_resolver registered [ 2.503692] ThumbEE CPU extension supported. [ 2.508109] Registering SWP/SWPB emulation handler [ 2.534176] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.541222] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.552701] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.568954] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.575728] [drm] No driver support for vblank timestamp query. [ 2.596433] mmc1: new high speed MMC card at address 0001 [ 2.606265] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.612867] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.620028] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.629116] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.639711] mmcblk1: p1 [ 2.756194] Console: switching to colour frame buffer device 240x75 [ 2.843490] drm drm: fb0: frame buffer device [ 2.859734] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.869821] usb2_vbus: supplied by vdd-sys-5v0 [ 2.881552] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.887142] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.896024] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.909748] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.920263] hub 1-0:1.0: USB hub found [ 2.924280] hub 1-0:1.0: 1 port detected [ 2.934533] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.948276] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.010694] dvdd_ts: disabling [ 3.013795] usb1_vbus: disabling [ 3.017168] vdd_cam_1v8_reg: disabling [ 3.024641] Waiting for root device /dev/mmcblk0p1... [ 3.234744] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.213050] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 49.946594] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:57]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:58]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:59]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.495173] Key type dns_resolver registered [ 2.501630] ThumbEE CPU extension supported. [ 2.506048] Registering SWP/SWPB emulation handler [ 2.554805] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.561112] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.569640] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.585882] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.592715] [drm] No driver support for vblank timestamp query. [ 2.611382] mmc1: new high speed MMC card at address 0001 [ 2.620415] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.627581] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.636111] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.644577] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.655241] mmcblk1: p1 [ 2.773523] Console: switching to colour frame buffer device 240x75 [ 2.860440] drm drm: fb0: frame buffer device [ 2.879549] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.889688] usb2_vbus: supplied by vdd-sys-5v0 [ 2.900421] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.906011] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.914942] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.929564] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.939981] hub 1-0:1.0: USB hub found [ 2.944052] hub 1-0:1.0: 1 port detected [ 2.954959] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.969026] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.031074] dvdd_ts: disabling [ 3.034290] usb1_vbus: disabling [ 3.037551] vdd_cam_1v8_reg: disabling [ 3.045018] Waiting for root device /dev/mmcblk0p1... [ 3.254567] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.211307] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 61.857147] random: nonblocking pool is initialized
[PYBOOT] [dalmore 02:11]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 02:12]: got exception: timeout ~$off
[PYBOOT] [dalmore 02:13]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------
[ 2.816970] Bluetooth: RFCOMM ver 1.11 [ 2.820916] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.826310] Bluetooth: BNEP socket layer initialized [ 2.831398] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.837396] Bluetooth: HIDP socket layer initialized [ 2.844386] Key type dns_resolver registered [ 2.853985] Registering SWP/SWPB emulation handler [ 2.882458] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.887699] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.894902] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.916670] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.923454] [drm] No driver support for vblank timestamp query. [ 3.099808] Console: switching to colour frame buffer device 240x75 [ 3.187070] drm drm: fb0: frame buffer device [ 3.219205] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.226432] usb2_vbus: supplied by vdd-sys-5v0 [ 3.234929] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.240741] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.249861] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.269316] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.283334] hub 1-0:1.0: USB hub found [ 3.287360] hub 1-0:1.0: 1 port detected [ 3.301452] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.317538] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.414782] dvdd_ts: disabling [ 3.417888] usb1_vbus: disabling [ 3.421271] vdd_cam_1v8_reg: disabling [ 3.425948] ALSA device list: [ 3.429012] #0: NVIDIA Tegra Dalmore [ 3.434909] Waiting for root device /dev/mmcblk0p1... [ 3.609314] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.632743] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 62.582811] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:44]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:45]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:47]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.718826] dwmmc_exynos 12550000.mmc: DW MMC controller at irq 107,32 bit host data width,128 deep fifo [ 1.728544] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.732391] usb 1-3: new high-speed USB device number 2 using exynos-ehci [ 1.767420] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.768615] usbcore: registered new interface driver usbhid [ 1.773839] usbhid: USB HID core driver [ 1.782509] NET: Registered protocol family 10 [ 1.788103] sit: IPv6 over IPv4 tunneling driver [ 1.788584] NET: Registered protocol family 17 [ 1.791514] NET: Registered protocol family 15 [ 1.795996] Key type dns_resolver registered [ 1.802387] Registering SWP/SWPB emulation handler [ 1.806078] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.810725] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.842949] max98090 1-0010: MAX98090 REVID=0x43 [ 1.845211] max98090 1-0010: use default 2.8v micbias [ 1.847587] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.857007] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.866977] mmc1: new DDR MMC card at address 0001 [ 1.868632] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.880314] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.884218] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.893913] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.894775] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.905764] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.907450] mmcblk1: p1 p2 [ 1.922521] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:20 UTC (946688420) [ 1.948735] VDD10_HDMI_1.0V: disabling [ 1.949480] vdd_g3d: disabling [ 1.950544] BUCK8_2.8V: disabling [ 1.95471n] ALSA device list: [ 1.956127] #0: Odroid-U3 [ 1.960173] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:50]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:51]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 3.119086] [<c030b90c>] (dump_backtrace_entry) from [<c0310394>] (unwind_backtrace+0x78/0xf4) [ 3.128104] [<c0310394>] (unwind_backtrace) from [<c030bc70>] (die+0x304/0x474) [ 3.135756] [<c030bc70>] (die) from [<c031cb9c>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 3.144040] [<c031cb9c>] (__do_kernel_fault.part.0) from [<c0317c10>] (do_page_fault+0x370/0x384) [ 3.153334] [<c0317c10>] (do_page_fault) from [<c03012c8>] (do_DataAbort+0x3c/0xb8) [ 3.161343] [<c03012c8>] (do_DataAbort) from [<c030c420>] (__dabt_svc+0x40/0x60) [ 3.169085] Exception stack(0xc1301d78 to 0xc1301dc0) [ 3.174368] 1d60: 0000010e 00000000 [ 3.182923] 1d80: c1205020 00000000 c1205014 2ddc5000 2ddc5000 ffffffe0 2ddc5000 00000000 [ 3.191479] 1da0: eefca014 00000000 00000000 c1301dc8 c1301dc8 c03c0840 a0000193 ffffffff [ 3.200037] [<c030c420>] (__dabt_svc) from [<c03c0840>] (perf_event_task_tick+0x5c/0x264) [ 3.208597] [<c03c0840>] (perf_event_task_tick) from [<c0364844>] (scheduler_tick+0x90/0xe8) [ 3.217425] [<c0364844>] (scheduler_tick) from [<c0393f98>] (update_process_times+0x58/0x64) [ 3.226263] [<c0393f98>] (update_process_times) from [<c03a4de8>] (tick_sched_timer+0x48/0x8c) [ 3.235280] [<c03a4de8>] (tick_sched_timer) from [<c0394cd8>] (__hrtimer_run_queues+0x128/0x1bc) [ 3.244482] [<c0394cd8>] (__hrtimer_run_queues) from [<c0394f28>] (hrtimer_interrupt+0xa8/0x208) [ 3.253675] [<c0394f28>] (hrtimer_interrupt) from [<c09dd878>] (arch_timer_handler_virt+0x28/0x30) [ 3.263055] [<c09dd878>] (arch_timer_handler_virt) from [<c0387d20>] (handle_percpu_devid_irq+0x6c/0x84) [ 3.272976] [<c0387d20>] (handle_percpu_devid_irq) from [<c0383a34>] (generic_handle_irq+0x24/0x34) [ 3.282438] [<c0383a34>] (generic_handle_irq) from [<c0383ce4>] (__handle_domain_irq+0x5c/0xb4) [ 3.291554] [<c0383ce4>] (__handle_domain_irq) from [<c0301798>] (gic_handle_irq+0x54/0x94) [ 3.300289] [<c0301798>] (gic_handle_irq) from [<c030c494>] (__irq_svc+0x54/0x70) [ 3.308121] Exception stack(0xc1301f50 to 0xc1301f98) [ 3.313408] 1f40: 00000001 00000000 ea000013 f0880000 [ 3.321974] 1f60: c1300000 c13024a4 00000000 00000000 c12075c0 c1302504 c140dee8 c130250c [ 3.330531] 1f80: 60000013 c1301fa0 c032af10 c0308740 a0000013 ffffffff [ 3.337455] [<c030c494>] (__irq_svc) from [<c0308740>] (arch_cpu_idle+0x20/0x3c) [ 3.345207] [<c0308740>] (arch_cpu_idle) from [<c03781b0>] (cpu_startup_entry+0x1bc/0x218) [ 3.353864] [<c03781b0>] (cpu_startup_entry) from [<c1100c4c>] (start_kernel+0x370/0x37c) [ 3.362425] [<c1100c4c>] (start_kernel) from [<8020807c>] (0x8020807c) [ 3.369259] Code: e5935000 e1a04007 ea000005 e08c30a3 (e796e103) [ 3.375636] ---[ end trace bafedb8a1cfb2157 ]--- [ 3.380470] Kernel panic - not syncing: Fatal exception in interrupt [ 4.364073] SMP: failed to stop secondary CPUs [ 4.368716] ---[ end Kernel panic - not syncing: Fatal exception in interrupt
[PYBOOT] [omap5uevm 00:49]: got exception: panic ~$off
[PYBOOT] [omap5uevm 00:51]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.738337] 3e00: ee0c6750 00000001 00000000 c2009c40 ee6f1c10 00000000 ee6f6580 ee6f620c [ 2.746906] 3e20: ee6f65c0 ee189240 ee6f6380 c05c58a8 ee6f6200 c143b968 024080c0 c0f09abc [ 2.755471] 3e40: c1341ea4 c1341edc ee19da10 ee19da10 ee6f61d0 ee19da10 c13c4f5c ee5aba00 [ 2.764035] 3e60: 0000000f ee00b000 ee0b4380 c05c59fc ee19da10 ee6f6190 c144fcfc c0798b08 [ 2.772601] 3e80: ee19da10 c144fcf4 c144fcfc c077b350 00000000 ee603ec8 c077b63c 00000001 [ 2.781171] 3ea0: ee5aba00 00000000 ee00b000 c07798f4 ee03fb70 ee0cbcb8 ee19da10 ee19da44 [ 2.789735] 3ec0: c13a29c0 c077b1ec ee19da10 00000001 2ddd1000 ee19da10 ee19da10 c13a29c0 [ 2.798300] 3ee0: c13a27e0 c077a6d0 ee19da10 c13a27c0 c13a27c0 c077ab5c c13a27f4 ee0b4380 [ 2.806854] 3f00: ee00b000 00000000 ee5aba00 c0356718 c1302100 ee00b018 ee00b000 ee0b4398 [ 2.815415] 3f20: 00000088 c1302100 ee00b018 ee602000 ee00b000 c0357384 ee059300 ee0b4380 [ 2.823976] 3f40: c035734c 00000000 ee059300 ee0b4380 c035734c 00000000 00000000 00000000 [ 2.832538] 3f60: 00000000 c035c148 00000001 00000000 2200a840 ee0b4380 00000000 00000000 [ 2.841104] 3f80: ee603f80 ee603f80 00000001 00010001 ee603f90 ee603f90 ee059300 ee059300 [ 2.849669] 3fa0: c035c06c 00000000 00000000 c0307d38 00000000 00000000 00000000 00000000 [ 2.858231] 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.866797] 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 40100400 531c6490 [ 2.875355] [<c035c570>] (kthread_data) from [<c0357968>] (wq_worker_sleeping+0x8/0xd0) [ 2.883739] [<c0357968>] (wq_worker_sleeping) from [<c0b528c4>] (__schedule+0x380/0x590) [ 2.892221] [<c0b528c4>] (__schedule) from [<c0b52b18>] (schedule+0x44/0x9c) [ 2.899603] [<c0b52b18>] (schedule) from [<c034386c>] (do_exit+0x678/0xa18) [ 2.906889] [<c034386c>] (do_exit) from [<c030bd7c>] (die+0x410/0x474) [ 2.913730] [<c030bd7c>] (die) from [<c031cb9c>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 2.922025] [<c031cb9c>] (__do_kernel_fault.part.0) from [<c0317c10>] (do_page_fault+0x370/0x384) [ 2.931319] [<c0317c10>] (do_page_fault) from [<c030137c>] (do_PrefetchAbort+0x38/0x9c) [ 2.939710] [<c030137c>] (do_PrefetchAbort) from [<c030c58c>] (__pabt_svc+0x4c/0x80) [ 2.947812] Exception stack(0xee603d88 to 0xee603dd0) [ 2.953102] 3d80: ee374810 00000005 0000006d c05d2064 00000005 ee369980 [ 2.961664] 3da0: 00000005 eefe6d44 0000000e ee6f65c0 ee6f1c10 00000000 ed809160 ee603dd8 [ 2.970224] 3dc0: c05d2070 0000006c 20000033 ffffffff [ 2.975508] [<c030c58c>] (__pabt_svc) from [<0000006c>] (0x6c) [ 2.981615] Code: ebff8888 e1a00006 e8bd81f0 e59032f8 (e5130014) [ 2.987999] ---[ end trace b8de22b39dac0376 ]--- [ 2.992835] Fixing recursive fault but reboot is needed!
[PYBOOT] [omap5uevm 02:10]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:11]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:12]: Done. Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.523213] isl29018 7-0044: No cache defaults, reading back from HW [ 1.529560] isl29018 7-0044: Failed to read 1: -6 [ 1.534146] isl29018 7-0044: regmap initialization fails: -6 [ 1.544382] NET: Registered protocol family 10 [ 1.548827] sit: IPv6 over IPv4 tunneling driver [ 1.552413] NET: Registered protocol family 17 [ 1.556414] can: controller area network core (rev 20120528 abi 9) [ 1.562602] NET: Registered protocol family 29 [ 1.566993] can: raw protocol (rev 20120528) [ 1.571242] can: broadcast manager protocol (rev 20120528 t) [ 1.576884] can: netlink gateway (rev 20130117) max_hops=1 [ 1.582609] Key type dns_resolver registered [ 1.586928] ThumbEE CPU extension supported. [ 1.590831] Registering SWP/SWPB emulation handler [ 1.600034] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.605514] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.611880] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.617258] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.627334] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.633291] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.646752] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.652484] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.658589] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.663966] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.673706] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.695784] Waiting for root device /dev/mmcblk0p1... [ 1.699633] mmc0: tuning execution failed: -5 [ 1.703719] mmc0: error -5 whilst initialising MMC card [ 2.572982] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.586282] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.591742] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.598116] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.603500] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:48]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:49]: got exception: timeout ~$off
[PYBOOT] [pi 01:50]: Done. Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.523559] isl29018 7-0044: No cache defaults, reading back from HW [ 1.529906] isl29018 7-0044: Failed to read 1: -6 [ 1.534490] isl29018 7-0044: regmap initialization fails: -6 [ 1.544753] NET: Registered protocol family 10 [ 1.549198] sit: IPv6 over IPv4 tunneling driver [ 1.552786] NET: Registered protocol family 17 [ 1.556785] can: controller area network core (rev 20120528 abi 9) [ 1.562973] NET: Registered protocol family 29 [ 1.567363] can: raw protocol (rev 20120528) [ 1.571612] can: broadcast manager protocol (rev 20120528 t) [ 1.577254] can: netlink gateway (rev 20130117) max_hops=1 [ 1.582978] Key type dns_resolver registered [ 1.587301] ThumbEE CPU extension supported. [ 1.591201] Registering SWP/SWPB emulation handler [ 1.600424] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.605905] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.612268] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.617646] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.627723] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.633679] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.647146] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.652882] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.658986] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.664362] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.674105] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.696372] Waiting for root device /dev/mmcblk0p1... [ 1.700185] mmc0: tuning execution failed: -5 [ 1.704308] mmc0: error -5 whilst initialising MMC card [ 2.573361] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.586659] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.592121] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.598494] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.603878] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:55]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:56]: got exception: timeout ~$off
[PYBOOT] [pi 01:58]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.652178] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.662669] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.669144] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.674561] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.682975] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.693853] mmc2: switch to bus width 8 failed [ 1.698587] mmc2: switch to bus width 4 failed [ 1.703076] mmc2: new high speed MMC card at address 0001 [ 1.703716] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.715809] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.717987] hub 3-0:1.0: USB hub found [ 1.718034] hub 3-0:1.0: 1 port detected [ 1.728425] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.736061] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.742697] [drm] No driver support for vblank timestamp query. [ 1.748970] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.756280] mmcblk2: p3 [ 1.790316] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.798292] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.801198] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.808543] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.828019] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.833753] mmc0: new SDIO card at address 0001 [ 1.858604] Console: switching to colour frame buffer device 170x48 [ 1.913832] drm drm: fb0: frame buffer device [ 1.928661] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.935478] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.942550] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.956746] vdd_1v5: disabling [ 1.959829] vdd_1v2: disabling [ 2.587030] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.598480] Waiting for root device /dev/mmcblk0p3... [ 58.486649] random: nonblocking pool is initialized
[PYBOOT] [seaboard 01:47]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:48]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:50]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------
[ 1.733939] Bluetooth: RFCOMM ver 1.11 [ 1.737745] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.743100] Bluetooth: BNEP socket layer initialized [ 1.748066] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.754021] Bluetooth: HIDP socket layer initialized [ 1.759531] Key type dns_resolver registered [ 1.764860] Registering SWP/SWPB emulation handler [ 1.779483] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.786196] VDDIO_HDMI: supplied by vdd_5v0 [ 1.790704] vdd_sys: supplied by vdd_5v0 [ 1.794708] vdd_sm2,vin_ldo*: supplied by vdd_sys [ 1.799720] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.806279] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.816695] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.823754] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.829208] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.837140] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.858370] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.866429] hub 3-0:1.0: USB hub found [ 1.870257] hub 3-0:1.0: 1 port detected [ 1.880979] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.887580] [drm] No driver support for vblank timestamp query. [ 1.967399] Console: switching to colour frame buffer device 170x48 [ 1.987314] drm drm: fb0: frame buffer device [ 2.018374] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.025473] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.033060] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.052744] vdd_1v5: disabling [ 2.055805] vdd_1v2: disabling [ 2.059014] ALSA device list: [ 2.061974] #0: NVIDIA Tegra Seaboard [ 2.408675] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.419878] Waiting for root device /dev/mmcblk0p3...
[PYBOOT] [seaboard 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:47]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:48]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.891998] ledtrig-cpu: registered to indicate activity on CPUs [ 2.899475] usbcore: registered new interface driver usbhid [ 2.905151] usbhid: USB HID core driver [ 2.928497] NET: Registered protocol family 10 [ 2.935607] sit: IPv6 over IPv4 tunneling driver [ 2.940856] NET: Registered protocol family 17 [ 2.945343] can: controller area network core (rev 20120528 abi 9) [ 2.951599] NET: Registered protocol family 29 [ 2.956054] can: raw protocol (rev 20120528) [ 2.960327] can: broadcast manager protocol (rev 20120528 t) [ 2.966003] can: netlink gateway (rev 20130117) max_hops=1 [ 2.972015] Key type dns_resolver registered [ 2.976470] ThumbEE CPU extension supported. [ 2.980773] Registering SWP/SWPB emulation handler [ 2.991455] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.998291] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.007476] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 3.014495] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 3.021484] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 3.028472] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 3.041473] db8500-esram12: disabling [ 3.045379] db8500-esram34: disabling [ 3.049346] V-CSI/DSI: disabling [ 3.052612] mmci-reg: disabling [ 3.056396] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 3.062408] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 3.071960] Waiting for root device /dev/mmcblk0p4... [ 3.104217] mmc3: new high speed MMC card at address 0001 [ 3.110595] mmcblk3: mmc3:0001 3.53 GiB [ 3.115020] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 3.120819] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 3.126617] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 3.133514] mmcblk3: p1 p2 p3 p4
[PYBOOT] [snowball 02:04]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:05]: got exception: timeout ~$off
[PYBOOT] [snowball 02:06]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 2.648742] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.659484] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.669464] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.680175] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.702941] NET: Registered protocol family 10 [ 2.708221] sit: IPv6 over IPv4 tunneling driver [ 2.713653] NET: Registered protocol family 17 [ 2.718139] NET: Registered protocol family 35 [ 2.722686] NET: Registered protocol family 37 [ 2.727264] Registering SWP/SWPB emulation handler [ 2.733489] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.739624] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.746307] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.753662] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-26 19:59:01 UTC (956779141) [ 2.762939] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.769958] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.776947] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.783935] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.797485] db8500-esram12: disabling [ 2.801300] db8500-esram34: disabling [ 2.805206] V-CSI/DSI: disabling [ 2.808471] mmci-reg: disabling [ 2.811798] ALSA device list: [ 2.814788] #0: MOP500-card [ 2.818115] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.824127] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.830322] Waiting for root device /dev/mmcblk0p4... Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 01:55]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:56]: got exception: timeout ~$off
[PYBOOT] [snowball 01:57]: Done.