Failed boards:
bbb multi_v7_defconfig : FAILED 3:05.85 beaver multi_v7_defconfig : FAILED 2:57.94 capri multi_v7_defconfig : FAILED 2:57.42 cubie multi_v7_defconfig : FAILED 3:00.39 cubie2 sunxi_defconfig : FAILED 1:21.09 cubie2 multi_v7_defconfig : FAILED 3:04.32 cubie2 multi_lpae_defconfig : FAILED 2:55.47 dalmore multi_v7_defconfig : FAILED 3:09.20 dalmore multi_lpae_defconfig : FAILED 3:01.70 hummingboard multi_v7_defconfig : FAILED 1:05.20 omap5uevm multi_v7_defconfig : FAILED 3:50.28 omap5uevm multi_lpae_defconfig : FAILED 3:49.83 panda multi_v7_defconfig : FAILED 1:35.17 seaboard multi_v7_defconfig : FAILED 2:59.10 snowball multi_v7_defconfig : FAILED 1:11.84 trimslice multi_v7_defconfig : FAILED 3:09.93 wandboard multi_v7_defconfig : FAILED 1:07.27
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:13.48 arndale exynos_defconfig : passed 1:05.94 bbb omap2plus_defconfig : passed 1:38.73 beaver tegra_defconfig : passed 0:54.44 capri bcm_defconfig : passed 0:42.61 cubie sunxi_defconfig : passed 0:56.63 dalmore tegra_defconfig : passed 1:21.77 hummingboard imx_v6_v7_defconfig : passed 1:16.74 omap5uevm omap2plus_defconfig : warnings 1:01.54 panda omap2plus_defconfig : passed 1:17.05 sama5 sama5_defconfig : passed 1:49.40 seaboard tegra_defconfig : passed 1:57.01 snow exynos_defconfig : passed 1:32.22 snowball u8500_defconfig : passed 3:15.62 trimslice tegra_defconfig : passed 0:58.86 wandboard imx_v6_v7_defconfig : passed 0:59.95
Offline boards:
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board bbb-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.237166] gspca_main: v2.14.0 registered [ 1.243491] sdhci: Secure Digital Host Controller Interface driver [ 1.250024] sdhci: Copyright(c) Pierre Ossman [ 1.255780] 48060000.mmc supply vmmc_aux not found, using dummy regulator [ 1.297244] 481d8000.mmc supply vmmc_aux not found, using dummy regulator [ 1.337261] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.344115] usbcore: registered new interface driver usbhid [ 1.350016] usbhid: USB HID core driver [ 1.359074] TCP: cubic registered [ 1.362579] NET: Registered protocol family 17 [ 1.367649] Key type dns_resolver registered [ 1.373083] ThumbEE CPU extension supported. [ 1.377672] Registering SWP/SWPB emulation handler [ 1.382701] PJ4 iWMMXt coprocessor enabled. [ 1.395088] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.449920] mmc1: BKOPS_EN bit is not set [ 1.456578] mmc1: new high speed MMC card at address 0001 [ 1.463024] mmcblk0: mmc1:0001 MMC02G 1.78 GiB [ 1.468043] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 1.474444] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 1.481437] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.488109] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.495485] libphy: 4a101000.mdio: probed [ 1.499819] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver unknown [ 1.509581] Detected MACID = bc:6a:29:7a:42:a8 [ 1.515831] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.529960] ALSA device list: [ 1.533094] No soundcards found. [ 1.538022] mmcblk0: p1 p2 [ 1.543856] mmcblk0boot1: unknown partition table [ 1.550919] mmcblk0boot0: unknown partition table [ 1.558080] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 1.567854] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 1.627627] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.636205] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 1.663029] devtmpfs: mounted [ 1.667205] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) [ 1.742080] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout
========================================================================
Board beaver-multi_v7_defconfig failure log: -------------------------------------------------
[ 3.660112] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 3.666197] pci 0000:00:01.0: bridge window [mem 0x28000000-0x280fffff 64bit pref] [ 3.673941] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.681035] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.686630] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.692983] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf002e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 472 [ 3.702978] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.712525] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.719153] [drm] No driver support for vblank timestamp query. [ 3.725110] host1x drm: No connectors reported connected with modes [ 3.731366] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.749784] Console: switching to colour frame buffer device 128x48 [ 3.761734] host1x drm: fb0: frame buffer device [ 3.766439] host1x drm: registered panic notifier [ 3.771136] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.777338] platform 7d004000.usb: Driver tegra-ehci requests probe deferral [ 3.784721] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.796061] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.801459] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.809255] tegra-ehci 7d004000.usb: irq 53, io mem 0x7d004000 [ 3.833069] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.839446] hub 1-0:1.0: USB hub found [ 3.843223] hub 1-0:1.0: 1 port detected [ 3.847558] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.852953] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.860753] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.883068] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.889366] hub 2-0:1.0: USB hub found [ 3.893143] hub 2-0:1.0: 1 port detected [ 3.901009] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.913756] ALSA device list: [ 3.916722] #0: NVIDIA Tegra Beaver [ 3.922863] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 3.931785] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 3.946682] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.954809] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 3.980953] devtmpfs: mounted [ 3.984418] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) ~$off # PYBOOT: Exception: timeout
========================================================================
Board capri-multi_v7_defconfig failure log: -------------------------------------------------
[ 0.930000] mmcblk0boot0: mmc0:0001 016G4A partition 1 2.00 MiB [ 0.930000] mmcblk0boot1: mmc0:0001 016G4A partition 2 2.00 MiB [ 0.940000] mmcblk0rpmb: mmc0:0001 016G4A partition 3 256 KiB [ 0.940000] Alternate GPT is invalid, using primary GPT. [ 0.950000] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 [ 0.950000] mmcblk0boot1: unknown partition table [ 0.960000] mmcblk0boot0: unknown partition table [ 1.010000] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null) [ 1.020000] VFS: Mounted root (ext4 filesystem) readonly on device 179:8. [ 1.020000] devtmpfs: mounted [ 1.030000] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) [ 1.050000] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 1.050000] Alignment trap: not handling instruction e1923f9f at [<c07d1aec>] [ 1.050000] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 1.050000] Internal error: : 1 [#2] SMP ARM [ 1.050000] Modules linked in: [ 1.050000] CPU: 0 PID: 29042 Comm: %s [ 1.050000] Not tainted 3.14.0-11940-ge4f3054 #1 [ 1.050000] task: c09ab4a4 ti: ea838000 task.ti: 70737573 [ 1.050000] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 1.050000] LR is at __down_read_trylock+0x14/0x54 [ 1.050000] pc : [<c07d1af0>] lr : [<c027cfb4>] psr: 40000193 [ 1.050000] sp : ea839f38 ip : c0b06390 fp : ea83a020 [ 1.050000] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 1.050000] r7 : c09ab4a4 r6 : 00000017 r5 : 20736eae r4 : 20736eaa [ 1.050000] r3 : 00000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 1.050000] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1.050000] Control: 10c5387d Table: babf404a DAC: 00000015 [ 1.050000] Process %s [ 1.050000] (pid: 29042, stack limit = 0x707377c3) [ 1.050000] Stack: (0xea839f38 to 0x70739573) [ 1.050000] [<c07d1af0>] (_raw_spin_lock_irqsave) from [<c027cfb4>] (__down_read_trylock+0x14/0x54) [ 1.050000] [<c027cfb4>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c) [ 1.050000] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 1.050000] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 1.050000] ---[ end trace bb21f344bc6b0dcd ]--- [ 1.050000] Alignment trap: not handling instruction e1923f9f at [<c07d1aec>] [ 1.050000] Unhandled fault: alignment exception (0x001) at 0x20736eae ~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie-multi_v7_defconfig failure log: -------------------------------------------------
[ 0.968962] usbcore: registered new interface driver usb-storage [ 0.976081] mousedev: PS/2 mouse device common for all mice [ 0.982971] i2c /dev entries driver [ 0.988109] usbcore: registered new interface driver uvcvideo [ 0.993920] USB Video Class driver (1.1.1) [ 0.998012] gspca_main: v2.14.0 registered [ 1.004929] sdhci: Secure Digital Host Controller Interface driver [ 1.011102] sdhci: Copyright(c) Pierre Ossman [ 1.015818] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.021931] usbcore: registered new interface driver usbhid [ 1.027520] usbhid: USB HID core driver [ 1.033952] TCP: cubic registered [ 1.037276] NET: Registered protocol family 17 [ 1.041882] Key type dns_resolver registered [ 1.046306] ThumbEE CPU extension supported. [ 1.050590] Registering SWP/SWPB emulation handler [ 1.055392] PJ4 iWMMXt coprocessor enabled. [ 1.060657] ahci-5v: 5000 mV [ 1.064117] usb1-vbus: 5000 mV [ 1.067625] usb2-vbus: 5000 mV [ 1.071298] platform 1c14000.usb: Driver ehci-platform requests probe deferral [ 1.079127] platform 1c1c000.usb: Driver ehci-platform requests probe deferral [ 1.086781] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.100190] platform 1c14000.usb: Driver ehci-platform requests probe deferral [ 1.108073] platform 1c1c000.usb: Driver ehci-platform requests probe deferral [ 3.432872] sun4i-emac 1c0b000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 3.452861] Sending DHCP requests ., OK [ 3.473301] IP-Config: Got DHCP answer from 172.16.1.1, my address is 172.16.1.173 [ 3.481063] IP-Config: Complete: [ 3.484318] device=eth0, hwaddr=08:00:08:1e:2f:44, ipaddr=172.16.1.173, mask=255.255.255.0, gw=172.16.1.1 [ 3.494327] host=172.16.1.173, domain=lixom.net, nis-domain=(none) [ 3.500933] bootserver=172.16.1.7, rootserver=172.16.1.7, rootpath= [ 3.507463] nameserver0=172.16.1.1 [ 3.511586] ALSA device list: [ 3.514568] No soundcards found. [ 3.523412] VFS: Mounted root (nfs filesystem) on device 0:11. [ 3.529673] devtmpfs: mounted [ 3.533261] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) ~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_lpae_defconfig failure log: -------------------------------------------------
[ 3.919625] ., OK [ 3.950084] IP-Config: Got DHCP answer from 172.16.1.1, my address is 172.16.1.109 [ 3.957895] IP-Config: Complete: [ 3.961170] device=eth0, hwaddr=08:00:08:1e:2f:64, ipaddr=172.16.1.109, mask=255.255.255.0, gw=172.16.1.1 [ 3.971173] host=172.16.1.109, domain=lixom.net, nis-domain=(none) [ 3.977778] bootserver=172.16.1.7, rootserver=172.16.1.7, rootpath= [ 3.984308] nameserver0=172.16.1.1 [ 3.988442] ALSA device list: [ 3.991423] No soundcards found. [ 4.000561] VFS: Mounted root (nfs filesystem) on device 0:11. [ 4.006802] devtmpfs: mounted [ 4.010444] Freeing unused kernel memory: 560K (c0a74000 - c0b00000) [ 4.034148] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 4.040955] Alignment trap: not handling instruction e1923f9f at [<c07d89ac>] [ 4.048082] Unhandled fault: alignment exception (0x221) at 0x20736eae [ 4.054603] Internal error: : 221 [#2] SMP ARM [ 4.059040] Modules linked in: [ 4.062107] CPU: 0 PID: 29042 Comm: %s [ 4.062107] Not tainted 3.14.0-11940-ge4f3054 #1 [ 4.070630] task: c09b14b0 ti: ea03e000 task.ti: 70737573 [ 4.076035] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 4.081084] LR is at __down_read_trylock+0x14/0x54 [ 4.085869] pc : [<c07d89b0>] lr : [<c027dd08>] psr: 40000193 [ 4.085869] sp : ea03ffb8 ip : c0b0c3e8 fp : ea0400a0 [ 4.097327] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 4.102544] r7 : c09b14b0 r6 : 00000207 r5 : 20736eae r4 : 20736eaa [ 4.109061] r3 : 20000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 4.115582] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 4.122793] Control: 30c5387d Table: 6a3ec500 DAC: fffffffd [ 4.128529] Process %s [ 4.128529] (pid: 29042, stack limit = 0x707377c3) [ 4.135829] Stack: (0xea03ffb8 to 0x70739573) [ 4.140199] [<c07d89b0>] (_raw_spin_lock_irqsave) from [<c027dd08>] (__down_read_trylock+0x14/0x54) [ 4.149242] [<c027dd08>] (__down_read_trylock) from [<c0218010>] (do_page_fault+0x78/0x27c) [ 4.157587] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 4.163674] ---[ end trace 14769bde44fb14c2 ]--- [ 4.168288] Alignment trap: not handling instruction e1923f9f at [<c07d89ac>] [ 4.175412] Unhandled fault: alignment exception (0x221) at 0x20736eae ~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_v7_defconfig failure log: -------------------------------------------------
[ 4.939982] IP-Config: Got DHCP answer from 172.16.1.1, my address is 172.16.1.109 [ 4.947823] IP-Config: Complete: [ 4.951101] device=eth0, hwaddr=08:00:08:1e:2f:64, ipaddr=172.16.1.109, mask=255.255.255.0, gw=172.16.1.1 [ 4.961101] host=172.16.1.109, domain=lixom.net, nis-domain=(none) [ 4.967706] bootserver=172.16.1.7, rootserver=172.16.1.7, rootpath= [ 4.974235] nameserver0=172.16.1.1 [ 4.978369] ALSA device list: [ 4.981353] No soundcards found. [ 4.990412] VFS: Mounted root (nfs filesystem) on device 0:11. [ 4.996706] devtmpfs: mounted [ 5.000322] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) [ 5.024000] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 5.030813] Alignment trap: not handling instruction e1923f9f at [<c07d1aec>] [ 5.037939] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 5.044457] Internal error: : 1 [#2] SMP ARM [ 5.048721] Modules linked in: [ 5.051789] CPU: 0 PID: 29042 Comm: %s [ 5.051789] Not tainted 3.14.0-11940-ge4f3054 #1 [ 5.060313] task: c09ab4a4 ti: ea03c000 task.ti: 70737573 [ 5.065716] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 5.070765] LR is at __down_read_trylock+0x14/0x54 [ 5.075551] pc : [<c07d1af0>] lr : [<c027cfb4>] psr: 40000193 [ 5.075551] sp : ea03df18 ip : c0b06390 fp : ea03e000 [ 5.087010] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 5.092227] r7 : c09ab4a4 r6 : 00000017 r5 : 20736eae r4 : 20736eaa [ 5.098745] r3 : 20000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 5.105264] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 5.112475] Control: 10c5387d Table: 6a47806a DAC: 00000015 [ 5.118212] Process %s [ 5.118212] (pid: 29042, stack limit = 0x707377c3) [ 5.125512] Stack: (0xea03df18 to 0x70739573) [ 5.129881] [<c07d1af0>] (_raw_spin_lock_irqsave) from [<c027cfb4>] (__down_read_trylock+0x14/0x54) [ 5.138925] [<c027cfb4>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c) [ 5.147271] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 5.154921] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 5.161009] ---[ end trace 5412ee899eca5701 ]--- [ 5.165625] Alignment trap: not handling instruction e1923f9f at [<c07d1aec>] [ 5.172748] Unhandled fault: alignment exception (0x001) at 0x20736eae ~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-sunxi_defconfig failure log: -------------------------------------------------
[ 0.017727] platform ahci-5v.2: Driver reg-fixed-voltage requests probe deferral [ 0.017753] reg-fixed-voltage usb1-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 0.017765] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.017786] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.017799] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.018754] Switched to clocksource arch_sys_counter [ 0.025727] NET: Registered protocol family 2 [ 0.026190] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.026278] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.026399] TCP: Hash tables configured (established 8192 bind 8192) [ 0.026482] TCP: reno registered [ 0.026497] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.026553] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.026753] NET: Registered protocol family 1 [ 0.027139] RPC: Registered named UNIX socket transport module. [ 0.027153] RPC: Registered udp transport module. [ 0.027159] RPC: Registered tcp transport module. [ 0.027164] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.028124] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.028596] bounce pool size: 64 pages [ 0.036361] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.036378] io scheduler noop registered [ 0.036384] io scheduler deadline registered [ 0.036563] io scheduler cfq registered (default) [ 0.038204] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.079256] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.081655] console [ttyS0] disabled [ 0.101852] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.616914] console [ttyS0] enabled [ 0.621629] mousedev: PS/2 mouse device common for all mice [ 0.627453] i2c /dev entries driver [ 0.632273] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.641262] TCP: cubic registered [ 0.644583] NET: Registered protocol family 17 [ 0.649146] Registering SWP/SWPB emulation handler [ 0.654846] ahci-5v: 5000 mV [ 0.658081] usb1-vbus: 5000 mV [ 0.661484] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout
========================================================================
Board dalmore-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.746255] input: NVIDIA Tegra Dalmore Headphones as /devices/soc0/sound.5/sound/card0/input0 [ 2.759240] TCP: cubic registered [ 2.762651] NET: Registered protocol family 17 [ 2.767762] Key type dns_resolver registered [ 2.773846] ThumbEE CPU extension supported. [ 2.778169] Registering SWP/SWPB emulation handler [ 2.783031] PJ4 iWMMXt coprocessor enabled. [ 2.794095] dvdd_ts: 1800 mV [ 2.798799] usb1_vbus: 5000 mV [ 2.802144] usb1_vbus: supplied by vdd-sys-5v0 [ 2.808170] usb2_vbus: 5000 mV [ 2.811498] usb2_vbus: supplied by vdd-sys-5v0 [ 2.817479] vdd_hdmi_5v0: 5000 mV [ 2.821064] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.830772] vdd_cam_1v8_reg: 1800 mV [ 2.850705] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.857442] [drm] No driver support for vblank timestamp query. [ 2.987260] Console: switching to colour frame buffer device 240x75 [ 3.072911] host1x drm: fb0: frame buffer device [ 3.077721] host1x drm: registered panic notifier [ 3.082617] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.090309] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.102129] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.107812] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.118866] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.142415] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.151778] hub 1-0:1.0: USB hub found [ 3.155941] hub 1-0:1.0: 1 port detected [ 3.165017] input: gpio-keys.3 as /devices/soc0/gpio-keys.3/input/input1 [ 3.176077] palmas-rtc rtc.8: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.218567] ALSA device list: [ 3.221579] #0: NVIDIA Tegra Dalmore [ 3.229480] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 3.239441] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 3.278862] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.287177] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 3.302164] devtmpfs: mounted [ 3.306958] Freeing unused kernel memory: 560K (c0a74000 - c0b00000) ~$off # PYBOOT: Exception: timeout
========================================================================
Board dalmore-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.746046] input: NVIDIA Tegra Dalmore Headphones as /devices/soc0/sound.5/sound/card0/input0 [ 2.759001] TCP: cubic registered [ 2.762416] NET: Registered protocol family 17 [ 2.767483] Key type dns_resolver registered [ 2.773539] ThumbEE CPU extension supported. [ 2.777862] Registering SWP/SWPB emulation handler [ 2.782723] PJ4 iWMMXt coprocessor enabled. [ 2.793639] dvdd_ts: 1800 mV [ 2.797932] usb1_vbus: 5000 mV [ 2.801243] usb1_vbus: supplied by vdd-sys-5v0 [ 2.807084] usb2_vbus: 5000 mV [ 2.810386] usb2_vbus: supplied by vdd-sys-5v0 [ 2.816198] vdd_hdmi_5v0: 5000 mV [ 2.819760] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.829154] vdd_cam_1v8_reg: 1800 mV [ 2.846801] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.853555] [drm] No driver support for vblank timestamp query. [ 2.972808] Console: switching to colour frame buffer device 240x75 [ 3.058184] host1x drm: fb0: frame buffer device [ 3.063079] host1x drm: registered panic notifier [ 3.067870] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.075745] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.087356] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.093010] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.104040] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.122603] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.131776] hub 1-0:1.0: USB hub found [ 3.135839] hub 1-0:1.0: 1 port detected [ 3.144861] input: gpio-keys.3 as /devices/soc0/gpio-keys.3/input/input1 [ 3.155956] palmas-rtc rtc.8: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.198896] ALSA device list: [ 3.201906] #0: NVIDIA Tegra Dalmore [ 3.209638] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 3.219573] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 3.258974] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.267290] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 3.282361] devtmpfs: mounted [ 3.287052] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) ~$off # PYBOOT: Exception: timeout
========================================================================
Board hummingboard-multi_v7_defconfig failure log: -------------------------------------------------
C1 U-Boot > tftp 0x10800000 mainline/v3.14-11940-ge4f3054/multi_v7_defconfig/zImage tftp 0x10800000 mainline/v3.14-11940-ge4f3054/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.111 Filename 'mainline/v3.14-11940-ge4f3054/multi_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################################################### 2 MiB/s done Bytes transferred = 4648072 (46ec88 hex) C1 U-Boot >setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 C1 U-Boot >tftp 0x11000000 mainline/v3.14-11940-ge4f3054/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb tftp 0x11000000 mainline/v3.14-11940-ge4f3054/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.111 Filename 'mainline/v3.14-11940-ge4f3054/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb'. Load address: 0x11000000 Loading: *## 929.7 KiB/s done Bytes transferred = 25705 (6469 hex) C1 U-Boot > printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk C1 U-Boot > bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x46ec88 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 11009468
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board omap5uevm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 46.731741] smps9: 2100 mV [ 46.735549] smps10_out2: 5000 mV [ 46.739769] smps10_out1: 5000 mV [ 46.743632] ldo1: 1500 <--> 1800 mV [ 46.748231] ldo2: 2800 mV [ 46.752567] ldo3: 1500 mV [ 46.756016] ldo4: 1500 <--> 1800 mV [ 46.761262] ldo5: 1800 mV [ 46.767094] ldo6: 1200 mV [ 46.770774] ldo7: 2000 mV [ 46.775099] ldo8: 3000 mV [ 46.779296] ldo9: 1800 <--> 3000 mV at 900 mV [ 46.785450] ldoln: 1800 mV [ 46.789870] ldousb: 3250 mV [ 46.793370] REGEN1: no parameters [ 46.796924] REGEN2: no parameters [ 46.800633] regen3: no parameters [ 46.804428] SYSEN1: no parameters [ 46.807985] SYSEN2: no parameters [ 47.050395] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.057508] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.063757] 4809c000.mmc supply vmmc_aux not found, using dummy regulator [ 47.071682] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 47.110464] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.123929] ALSA device list: [ 47.127034] No soundcards found. [ 47.131083] Waiting for root device /dev/mmcblk1p2... [ 47.166959] mmc2: host does not support reading read-only switch. assuming write-enable. [ 47.177166] mmc2: new high speed SDHC card at address 0001 [ 47.183114] mmcblk1: mmc2:0001 00000 14.6 GiB [ 47.188600] mmcblk1: p1 p2 [ 47.240623] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 47.249467] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities [ 47.272007] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 47.280483] VFS: Mounted root (ext4 filesystem) readonly on device 179:50. [ 47.295046] devtmpfs: mounted [ 47.298424] Freeing unused kernel memory: 560K (c0a74000 - c0b00000) [ 47.331560] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout
========================================================================
Board omap5uevm-multi_v7_defconfig failure log: -------------------------------------------------
[ 47.616032] smps9: 2100 mV [ 47.619858] smps10_out2: 5000 mV [ 47.624061] smps10_out1: 5000 mV [ 47.627911] ldo1: 1500 <--> 1800 mV [ 47.632489] ldo2: 2800 mV [ 47.636810] ldo3: 1500 mV [ 47.640270] ldo4: 1500 <--> 1800 mV [ 47.645502] ldo5: 1800 mV [ 47.651325] ldo6: 1200 mV [ 47.655013] ldo7: 2000 mV [ 47.659361] ldo8: 3000 mV [ 47.663563] ldo9: 1800 <--> 3000 mV at 900 mV [ 47.669704] ldoln: 1800 mV [ 47.674130] ldousb: 3250 mV [ 47.677617] REGEN1: no parameters [ 47.681194] REGEN2: no parameters [ 47.684876] regen3: no parameters [ 47.688668] SYSEN1: no parameters [ 47.692228] SYSEN2: no parameters [ 47.929314] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 48.209324] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 48.215554] 4809c000.mmc supply vmmc_aux not found, using dummy regulator [ 48.223462] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 48.269395] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.282734] ALSA device list: [ 48.285831] No soundcards found. [ 48.289831] Waiting for root device /dev/mmcblk1p2... [ 48.305888] mmc2: host does not support reading read-only switch. assuming write-enable. [ 48.316091] mmc2: new high speed SDHC card at address 0001 [ 48.322051] mmcblk1: mmc2:0001 00000 14.6 GiB [ 48.327524] mmcblk1: p1 p2 [ 48.399530] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 48.408348] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities [ 48.431301] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 48.439779] VFS: Mounted root (ext4 filesystem) readonly on device 179:50. [ 48.449491] devtmpfs: mounted [ 48.452859] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) [ 48.486721] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout
========================================================================
Board panda-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.673492] Key type dns_resolver registered [ 1.678466] Power Management for TI OMAP4+ devices. [ 1.683654] Power Management for TI OMAP4. [ 1.687927] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.695098] ThumbEE CPU extension supported. [ 1.699859] Registering SWP/SWPB emulation handler [ 1.699859] PJ4 iWMMXt coprocessor enabled. [ 1.709960] vwl1271: 1800 mV [ 1.714630] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.724395] twl 0-0048: PIH (irq 39) nested IRQs [ 1.730072] twl_rtc rtc.15: Power up reset detected. [ 1.735961] twl_rtc rtc.15: Enabling TWL-RTC [ 1.742950] twl_rtc rtc.15: rtc core: registered rtc.15 as rtc0 [ 1.749908] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.755981] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.762054] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.768218] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.773742] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.779235] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.784240] VDAC: 1800 mV [ 1.784240] VANA: 2100 mV [ 1.791503] VCXIO: 1800 mV [ 1.794464] VUSB: 3300 mV [ 1.798431] V1V8: 1800 mV [ 1.802001] V2V1: 2100 mV [ 1.878997] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.031005] hub 1-1:1.0: USB hub found [ 2.035583] hub 1-1:1.0: 5 ports detected [ 2.049133] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 2.056762] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 2.065643] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 2.073120] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.079650] 4809c000.mmc supply vmmc_aux not found, using dummy regulator [ 2.088043] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.129638] 480d5000.mmc supply vmmc_aux not found, using dummy regulator [ 2.461730] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.602172] smsc95xx v1.0.4 [ 3.213623] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, 5e:2e:78:88:4d:f9 ~$off # PYBOOT: Exception: timeout
========================================================================
Board seaboard-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.525143] Unable to handle kernel paging request at virtual address 00003aa0 [ 2.525147] Unable to handle kernel paging request at virtual address 00003aa0 [ 2.525150] Unable to handle kernel paging request at virtual address 00003aa0 [ 2.525153] Unable to handle kernel paging request at virtual address 00003aa0 [ 2.525156] Unable to handle kernel paging request at virtual address 00003aa0 [ 2.525160] Unable to handle kernel paging request at virtual address 00003aa0 [ 2.525163] Unable to handle kernel paging request at virtual address 00003aa0 [ 2.701159] Alignment trap: not handling instruction e1923f9f at [<c07d1aec>] [ 2.708279] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 2.714792] Internal error: : 1 [#2] SMP ARM [ 2.719048] Modules linked in: [ 2.722104] CPU: 0 PID: 29042 Comm: %s [ 2.722104] Not tainted 3.14.0-11940-ge4f3054 #1 [ 2.730617] task: c09ab4a4 ti: ea03a000 task.ti: 70737573 [ 2.736015] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 2.741059] LR is at __down_read_trylock+0x14/0x54 [ 2.745839] pc : [<c07d1af0>] lr : [<c027cfb4>] psr: 40000193 [ 2.745839] sp : ea03bee8 ip : c0b06390 fp : ea03bfd0 [ 2.757292] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 2.762503] r7 : c09ab4a4 r6 : 00000017 r5 : 20736eae r4 : 20736eaa [ 2.769013] r3 : 00000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 2.775526] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 2.782732] Control: 10c5387d Table: 2a4c804a DAC: 00000015 [ 2.788463] Process %s [ 2.788463] (pid: 29042, stack limit = 0x707377c3) [ 2.795755] Stack: (0xea03bee8 to 0x70739573) [ 2.800114] [<c07d1af0>] (_raw_spin_lock_irqsave) from [<c027cfb4>] (__down_read_trylock+0x14/0x54) [ 2.809156] [<c027cfb4>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c) [ 2.817497] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 2.825152] [<c02083d4>] (do_DataAbort) from [<c0212258>] (__dabt_svc+0x38/0x60) [ 2.832530] Exception stack(0xea03bfd0 to 0xea03c018) [ 2.837571] bfc0: 0000017c 00000017 ea03c000 00000193 [ 2.845734] bfe0: ea03c018 c0217c58 00000017 00000000 0000017c 00404100 ea068000 ea03c0f0 [ 2.853895] c000: c0b06390 ea03c018 c02083d4 c0217c84 00000193 ffffffff [ 2.860499] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 2.866581] ---[ end trace c8b44393a3a7cf57 ]--- [ 2.871187] Alignment trap: not handling instruction e1923f9f at [<c07d1aec>] [ 2.878307] Unhandled fault: alignment exception (0x001) at 0x20736eae ~$off # PYBOOT: Exception: timeout
========================================================================
Board snowball-multi_v7_defconfig failure log: -------------------------------------------------
BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.157 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x00100000 tmp/snowball-Z7Q25s/tmpLiAzLr-uImage tftp 0x00100000 tmp/snowball-Z7Q25s/tmpLiAzLr-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.157 Filename 'tmp/snowball-Z7Q25s/tmpLiAzLr-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################ done Bytes transferred = 4689385 (478de9 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4689321 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board trimslice-multi_v7_defconfig failure log: -------------------------------------------------
[ 4.789412] (pid: 29042, stack limit = 0x707377c3) [ 4.796733] Stack: (0xea03bee8 to 0x70739573) [ 4.801140] [<c07d1af0>] (_raw_spin_lock_irqsave) from [<c027cfb4>] (__down_read_trylock+0x14/0x54) [ 4.810236] [<c027cfb4>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c) [ 4.818620] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 4.826325] [<c02083d4>] (do_DataAbort) from [<c0212258>] (__dabt_svc+0x38/0x60) [ 4.833727] Exception stack(0xea03bfd0 to 0xea03c018) [ 4.838798] bfc0: 0000017c 00000017 ea03c000 00000193 [ 4.846995] bfe0: ea03c018 c0217c58 00000017 00000000 0000017c 00404100 ea068000 ea03c0f0 [ 4.855186] c000: c0b06390 ea03c018 c02083d4 c0217c84 00000193 ffffffff [ 4.861825] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 4.867933] ---[ end trace 90e88fa2aa75114b ]--- [ 4.872564] Alignment trap: not handling instruction e1923f9f at [<c07d1aec>] [ 4.879706] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 4.890246] Unable to handle kernel paging request at virtual address fffffffe [ 4.897488] Unable to handle kernel paging request at virtual address 00003aa0 [ 4.904717] Unable to handle kernel paging request at virtual address 00003aa0 [ 4.911941] Unable to handle kernel paging request at virtual address 00003aa0 [ 4.919166] Unable to handle kernel paging request at virtual address 00003aa0 [ 4.926392] Unable to handle kernel paging request at virtual address 00003aa0 [ 4.933618] Unable to handle kernel paging request at virtual address 00003aa0 [ 4.940843] Unable to handle kernel paging request at virtual address 00003aa0 [ 4.948067] Unable to handle kernel paging request at virtual address 00003aa0 [ 4.955292] Unable to handle kernel paging request at virtual address 00003aa0 [ 4.962517] Unable to handle kernel paging request at virtual address 00003aa0 [ 4.969741] Unable to handle kernel paging request at virtual address 00003aa0 [ 4.976965] Unable to handle kernel paging request at virtual address 00003aa0 [ 4.984189] Unable to handle kernel paging request at virtual address 00003aa0 [ 4.991413] Unable to handle kernel paging request at virtual address 00003aa0 [ 4.998638] Unable to handle kernel paging request at virtual address 00003aa0 [ 5.005863] Unable to handle kernel paging request at virtual address 00003aa0 [ 5.013088] Unable to handle kernel paging request at virtual address 00003aa0 [ 5.020314] Unable to handle kernel paging request at virtual address 00003aa0 [ 5.027539] Unable to handle kernel paging request at virtual address 00003aa0 [ 5.034763] Unable to handle kernel paging request at virtual address 00003aa0 [ 5.041988] Unable to handle kernel paging request at virtual address 00003aa0 [ 5.049212] Unable to handle kernel paging request at virtual address 00003aa0 [ 5.056435] Unable to handle kernel paging request at virtual address 00003aa0 ~$off # PYBOOT: Exception: timeout
========================================================================
Board wandboard-multi_v7_defconfig failure log: -------------------------------------------------
tftp 0x10800000 mainline/v3.14-11940-ge4f3054/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.110 Filename 'mainline/v3.14-11940-ge4f3054/multi_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################################################### 6.1 MiB/s done Bytes transferred = 4648072 (46ec88 hex) => setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 => tftp 0x11000000 mainline/v3.14-11940-ge4f3054/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb tftp 0x11000node: wandboard status: on 000 mainline/v3.14-11940-ge4f3054/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.110 Filename 'mainline/v3.14-11940-ge4f3054/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb'. Load address: 0x11000000 Loading: *## 1.7 MiB/s done Bytes transferred = 29143 (71d7 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x46ec88 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100a1d6
Starting kernel ...
~$off # PYBOOT: Exception: timeout