Failed boards:
cubie2 sunxi_defconfig : FAILED 1:21.22 cubie2 multi_v7_defconfig : FAILED 1:37.35 cubie2 multi_lpae_defconfig : FAILED 1:21.78 omap5uevm omap2plus_defconfig : FAILED 1:42.97 omap5uevm multi_v7_defconfig : FAILED 1:50.26 omap5uevm multi_lpae_defconfig : FAILED 1:43.52 snow multi_v7_defconfig : FAILED 1:13.29 snow multi_lpae_defconfig : FAILED 1:14.09 snowball u8500_defconfig : FAILED 1:46.68
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:13.37 arndale exynos_defconfig : passed 1:19.29 arndale multi_v7_defconfig : passed 1:40.84 arndale multi_lpae_defconfig : passed 1:27.13 bbb omap2plus_defconfig : passed 1:31.02 bbb multi_v7_defconfig : passed 1:27.11 beaver tegra_defconfig : passed 1:04.73 beaver multi_v7_defconfig : passed 0:57.68 capri bcm_defconfig : passed 0:38.86 capri multi_v7_defconfig : passed 0:46.71 cubie sunxi_defconfig : passed 1:15.11 cubie multi_v7_defconfig : passed 1:21.34 cubox multi_v7_defconfig : passed 1:19.71 dalmore tegra_defconfig : passed 1:33.39 dalmore multi_v7_defconfig : passed 1:20.48 dalmore multi_lpae_defconfig : passed 1:29.42 hummingboard imx_v6_v7_defconfig : passed 1:36.08 hummingboard multi_v7_defconfig : passed 1:07.42 jetson tegra_defconfig : passed 0:57.18 jetson multi_v7_defconfig : passed 0:56.34 jetson multi_lpae_defconfig : passed 1:07.88 panda omap2plus_defconfig : warnings 1:35.11 panda multi_v7_defconfig : warnings 2:05.83 sama5 sama5_defconfig : passed 1:53.99 seaboard tegra_defconfig : passed 1:01.73 seaboard multi_v7_defconfig : passed 1:22.56 snow exynos_defconfig : passed 1:19.16 snowball multi_v7_defconfig : passed 4:50.70 trimslice tegra_defconfig : passed 1:08.01 trimslice multi_v7_defconfig : passed 1:06.25 wandboard imx_v6_v7_defconfig : passed 1:09.12 wandboard multi_v7_defconfig : passed 1:05.23
Offline boards:
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board cubie2-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.329182] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.338146] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.347684] scsi0 : ahci_platform [ 1.351394] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.360137] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.365788] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.373859] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.380067] mmc0: new high speed SDHC card at address aaaa [ 1.385960] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.392237] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.397783] hub 1-0:1.0: USB hub found [ 1.402021] hub 1-0:1.0: 1 port detected [ 1.406115] mmcblk0: p1 [ 1.410420] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.416110] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.424087] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.435466] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.442418] hub 2-0:1.0: USB hub found [ 1.446264] hub 2-0:1.0: 1 port detected [ 1.451254] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.457954] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.465795] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.530314] hub 3-0:1.0: USB hub found [ 1.534166] hub 3-0:1.0: 1 port detected [ 1.539191] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.545909] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.553749] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.615287] hub 4-0:1.0: USB hub found [ 1.619130] hub 4-0:1.0: 1 port detected [ 1.623786] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14) [ 1.711355] No MAC Management Counters available [ 1.716125] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.722754] IP-Config: Failed to open eth0 [ 1.726873] IP-Config: No network devices available [ 1.731790] vcc3v0: disabling [ 1.734871] ALSA device list: [ 1.737849] No soundcards found. [ 1.741993] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.324177] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.333146] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.342706] scsi0 : ahci_platform [ 1.346424] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.355161] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.360811] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.368866] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.375075] mmc0: new high speed SDHC card at address aaaa [ 1.380957] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.387235] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.392804] hub 1-0:1.0: USB hub found [ 1.397037] hub 1-0:1.0: 1 port detected [ 1.401131] mmcblk0: p1 [ 1.405443] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.411142] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.419118] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.430473] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.437509] hub 2-0:1.0: USB hub found [ 1.441343] hub 2-0:1.0: 1 port detected [ 1.446357] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.453045] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.460886] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.525343] hub 3-0:1.0: USB hub found [ 1.529184] hub 3-0:1.0: 1 port detected [ 1.534203] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.540924] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.548763] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.610289] hub 4-0:1.0: USB hub found [ 1.614126] hub 4-0:1.0: 1 port detected [ 1.618798] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15) [ 1.706351] No MAC Management Counters available [ 1.711128] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.717746] IP-Config: Failed to open eth0 [ 1.721872] IP-Config: No network devices available [ 1.726792] vcc3v0: disabling [ 1.729871] ALSA device list: [ 1.732849] No soundcards found. [ 1.737000] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-sunxi_defconfig failure log: -------------------------------------------------
[ 0.994030] mmc0: new high speed SDHC card at address aaaa [ 0.999953] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.005957] mmcblk0: p1 [ 1.016235] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 1.023718] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.029633] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.038604] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.047497] scsi0 : ahci_platform [ 1.051144] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.059419] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.065016] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.072884] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.096162] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.103128] hub 1-0:1.0: USB hub found [ 1.106963] hub 1-0:1.0: 1 port detected [ 1.111427] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.117068] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.124910] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.146151] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.153032] hub 2-0:1.0: USB hub found [ 1.156862] hub 2-0:1.0: 1 port detected [ 1.161299] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.167978] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.175817] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.240964] hub 3-0:1.0: USB hub found [ 1.244758] hub 3-0:1.0: 1 port detected [ 1.249272] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.255907] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.263778] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.331006] hub 4-0:1.0: USB hub found [ 1.334794] hub 4-0:1.0: 1 port detected [ 1.339170] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:13 UTC (13) [ 1.426178] ata1: SATA link down (SStatus 0 SControl 300) [ 1.442468] No MAC Management Counters available [ 1.447237] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.453835] IP-Config: Failed to open eth0 [ 1.457958] IP-Config: No network devices available [ 1.462857] vcc3v0: disabling ~$off # PYBOOT: Exception: timeout
========================================================================
Board omap5uevm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 47.092612] NET: Registered protocol family 17 [ 47.092638] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.102179] mmcblk0: unknown partition table [ 47.102959] mmcblk0boot1: unknown partition table [ 47.103717] mmcblk0boot0: unknown partition table [ 47.118006] can: controller area network core (rev 20120528 abi 9) [ 47.124504] NET: Registered protocol family 29 [ 47.129156] can: raw protocol (rev 20120528) [ 47.133623] can: broadcast manager protocol (rev 20120528 t) [ 47.139548] can: netlink gateway (rev 20130117) max_hops=1 [ 47.145559] Key type dns_resolver registered [ 47.150092] omap_vc_init_channel: No PMIC info for vdd_core [ 47.155915] omap_vp_init: No PMIC info for vdd_core [ 47.161014] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.166651] omap_vp_init: No PMIC info for vdd_mm [ 47.171555] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.177289] omap_vp_init: No PMIC info for vdd_mpu [ 47.182582] ThumbEE CPU extension supported. [ 47.187055] Registering SWP/SWPB emulation handler [ 47.193253] palmas 0-0048: Irq flag is 0x00000000 [ 47.200980] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.208572] smps123: 600 <--> 1500 mV at 1060 mV [ 47.214734] smps45: 600 <--> 1310 mV at 1030 mV [ 47.221185] smps6: 1200 mV [ 47.225183] smps7: 1800 mV [ 47.229314] smps8: 600 <--> 1310 mV at 1040 mV [ 47.235041] smps9: failed to get the current voltage [ 47.240286] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.252345] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.376815] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.521823] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.527895] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.535333] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.542193] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.549913] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.563370] ALSA device list: [ 47.566465] No soundcards found. [ 47.570466] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout
========================================================================
Board omap5uevm-multi_v7_defconfig failure log: -------------------------------------------------
[ 47.537646] NET: Registered protocol family 17 [ 47.537674] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.547254] mmcblk0: unknown partition table [ 47.548027] mmcblk0boot1: unknown partition table [ 47.548797] mmcblk0boot0: unknown partition table [ 47.563029] can: controller area network core (rev 20120528 abi 9) [ 47.569528] NET: Registered protocol family 29 [ 47.574174] can: raw protocol (rev 20120528) [ 47.578643] can: broadcast manager protocol (rev 20120528 t) [ 47.584562] can: netlink gateway (rev 20130117) max_hops=1 [ 47.590573] Key type dns_resolver registered [ 47.595110] omap_vc_init_channel: No PMIC info for vdd_core [ 47.600932] omap_vp_init: No PMIC info for vdd_core [ 47.606026] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.611675] omap_vp_init: No PMIC info for vdd_mm [ 47.616583] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.622314] omap_vp_init: No PMIC info for vdd_mpu [ 47.627590] ThumbEE CPU extension supported. [ 47.632060] Registering SWP/SWPB emulation handler [ 47.638271] palmas 0-0048: Irq flag is 0x00000000 [ 47.645977] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.653547] smps123: 600 <--> 1500 mV at 1060 mV [ 47.659680] smps45: 600 <--> 1310 mV at 1030 mV [ 47.666131] smps6: 1200 mV [ 47.670129] smps7: 1800 mV [ 47.674257] smps8: 600 <--> 1310 mV at 1040 mV [ 47.679983] smps9: failed to get the current voltage [ 47.685231] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.697273] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.821886] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.966896] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.972983] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.980411] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.987262] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.994975] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.008405] ALSA device list: [ 48.011501] No soundcards found. [ 48.015502] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout
========================================================================
Board omap5uevm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.057364] usbcore: registered new interface driver usbhid [ 2.063186] usbhid: USB HID core driver [ 2.068545] oprofile: using timer interrupt. [ 2.073305] TCP: cubic registered [ 2.076806] Initializing XFRM netlink socket [ 2.081313] NET: Registered protocol family 17 [ 2.085992] NET: Registered protocol family 15 [ 2.090812] Key type dns_resolver registered [ 2.095383] omap_vc_init_channel: No PMIC info for vdd_core [ 2.101216] omap_vp_init: No PMIC info for vdd_core [ 2.106312] omap_vc_init_channel: No PMIC info for vdd_mm [ 2.111963] omap_vp_init: No PMIC info for vdd_mm [ 2.116985] omap_vc_init_channel: No PMIC info for vdd_mpu [ 2.122716] omap_vp_init: No PMIC info for vdd_mpu [ 2.128274] ThumbEE CPU extension supported. [ 2.132753] Registering SWP/SWPB emulation handler [ 2.137771] SmartReflex Class3 initialized [ 2.147130] palmas 0-0048: Irq flag is 0x00000000 [ 2.157692] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.210048] smps123: 600 <--> 1500 mV at 1060 mV [ 2.217001] smps45: 600 <--> 1310 mV at 1030 mV [ 2.224270] smps6: 1200 mV [ 2.228897] smps7: 1800 mV [ 2.233693] smps8: 600 <--> 1310 mV at 1040 mV [ 2.240123] smps9: failed to get the current voltage [ 2.246041] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.260422] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.269258] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.277194] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.283249] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.292370] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.301735] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.308698] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.317202] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.325834] sr_init: No PMIC hook to init smartreflex [ 2.331359] sr_init: platform driver register failed for SR [ 2.359491] pbias_mmc_omap5: disabling [ 2.364999] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout
========================================================================
Board snow-multi_lpae_defconfig failure log: -------------------------------------------------
[ 0.000000] DMA zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2568 pages used for memmap [ 0.000000] HighMem zone: 328704 pages, LIFO batch:31 [ 0.000000] PERCPU: Embedded 8 pages/cpu @ea79a000 s8448 r8192 d16128 u32768 [ 0.000000] pcpu-alloc: s8448 r8192 d16128 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 521744 [ 0.000000] Kernel command line: console=ttySAC3,115200 earlyprintk debug root=/dev/mmcblk0p3 rootwait [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1998952K/2093056K available (6463K kernel code, 894K rwdata, 2572K rodata, 664K init, 303K bss, 94104K reserved, 1314816K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0adb208 (9037 kB) [ 0.000000] .init : 0xc0adc000 - 0xc0b82100 ( 665 kB) [ 0.000000] .data : 0xc0b84000 - 0xc0c63840 ( 895 kB) [ 0.000000] .bss : 0xc0c63848 - 0xc0caf718 ( 304 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: failed to init: -19 [ 0.000000] Exynos5250: clock setup completed, armclk=1700000000 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000002] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 0.000006] Switching to timer-based delay loop [ 2889.571074] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 2889.571607] Console: colour dummy device 80x30 [ 2889.571618] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 2889.571626] pid_max: default: 32768 minimum: 301 [ 2889.571686] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.571692] Mountpoint-cache hash table entries: 2048 (order: 1, 81~$off # PYBOOT: Exception: timeout
========================================================================
Board snow-multi_v7_defconfig failure log: -------------------------------------------------
[ 0.000000] .init : 0xc0ad5000 - 0xc0b79100 ( 657 kB) [ 0.000000] .data : 0xc0b7a000 - 0xc0c58dc0 ( 892 kB) [ 0.000000] .bss : 0xc0c58dc8 - 0xc0ca3e18 ( 301 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: failed to init: -19 [ 0.000000] Exynos5250: clock setup completed, armclk=1700000000 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000002] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 0.000006] Switching to timer-based delay loop [ 2889.667716] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 2889.668263] Console: colour dummy device 80x30 [ 2889.668274] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 2889.668281] pid_max: default: 32768 minimum: 301 [ 2889.668343] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.668350] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.668617] CPU: Testing write buffer coherency: ok [ 2889.668726] CPU0: update cpu_power 1024 [ 2889.668732] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 2889.668828] Setting up static identity map for 0x40817448 - 0x408174e0 [ 2889.669953] CPU1: Booted secondary processor [ 2889.669985] CPU1: update cpu_power 1024 [ 2889.669988] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 2889.670033] Brought up 2 CPUs [ 2889.670041] SMP: Total of 2 processors activated. [ 2889.670045] CPU: All CPU(s) started in HYP mode. [ 2889.670048] CPU: Virtualization extensions available. [ 2889.670289] devtmpfs: initialized [ 2889.672186] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 2889.672379] pinctrl core: initialized pinctrl subsystem [ 2889.672584] regulator-dummy: no parameters [ 2889.678489] NET: Registered protocol family 16 [ 2889.679357] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 2889.680062] cpuidle: using governor ladder [ 2889.680071] cpuidle: using governor menu [ 2889.685131] exynos-audss-clk 38100~$off # PYBOOT: Exception: timeout
========================================================================
Board snowball-u8500_defconfig failure log: -------------------------------------------------
[ 3.627227] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.635162] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.647064] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.654388] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.665863] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.674377] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.686309] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.693634] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.705108] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.712921] HS USB OTG: no transceiver configured [ 3.717620] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.725463] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.733398] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.745300] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.752624] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.764099] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.772674] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.784576] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.791900] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.803375] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.811218] HS USB OTG: no transceiver configured [ 3.815917] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.823760] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.831665] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.843597] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.850921] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.862396] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.870910] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.882843] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.890136] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.901641] musb-hdrc musb-hdrc.25.auto: Error applying setting, reverse things back [ 3.909423] HS USB OTG: no transceiver configured [ 3.914154] musb-hdrc musb-hdrc.25.auto: musb_init_controller failed with status -517 [ 3.921997] platform musb-hdrc.25.auto: Driver musb-hdrc requests probe deferral [ 3.929931] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.941833] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.949157] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.960632] musb-ux500 musb-hdrc.25.auto: Error applying setting, reverse things back ~$off # PYBOOT: Exception: timeout