Failed boards:
bbb multi_v7_defconfig : FAILED 3:11.70 beaver multi_v7_defconfig : FAILED 2:57.42 capri multi_v7_defconfig : FAILED 2:57.83 cubie multi_v7_defconfig : FAILED 2:57.08 cubie2 sunxi_defconfig : FAILED 1:19.14 cubie2 multi_v7_defconfig : FAILED 3:02.57 cubie2 multi_lpae_defconfig : FAILED 2:54.06 dalmore multi_v7_defconfig : FAILED 3:04.64 dalmore multi_lpae_defconfig : FAILED 3:01.94 hummingboard multi_v7_defconfig : FAILED 1:05.40 omap5uevm multi_v7_defconfig : FAILED 3:55.31 omap5uevm multi_lpae_defconfig : FAILED 3:49.15 panda multi_v7_defconfig : FAILED 3:08.56 seaboard multi_v7_defconfig : FAILED 3:02.59 snowball multi_v7_defconfig : FAILED 1:12.33 trimslice multi_v7_defconfig : FAILED 3:07.03 wandboard multi_v7_defconfig : FAILED 1:05.42
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:19.84 arndale exynos_defconfig : passed 1:03.18 bbb omap2plus_defconfig : passed 1:33.27 beaver tegra_defconfig : passed 0:50.44 capri bcm_defconfig : passed 0:43.38 cubie sunxi_defconfig : passed 0:52.67 dalmore tegra_defconfig : passed 1:18.08 hummingboard imx_v6_v7_defconfig : passed 1:17.95 omap5uevm omap2plus_defconfig : warnings 1:13.27 panda omap2plus_defconfig : warnings 1:16.44 sama5 sama5_defconfig : passed 1:50.78 seaboard tegra_defconfig : passed 0:57.74 snow exynos_defconfig : passed 1:32.22 snowball u8500_defconfig : passed 1:22.50 trimslice tegra_defconfig : passed 0:58.35 wandboard imx_v6_v7_defconfig : passed 0:55.07
Offline boards:
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board bbb-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.226501] usbcore: registered new interface driver uvcvideo [ 1.232632] USB Video Class driver (1.1.1) [ 1.236960] gspca_main: v2.14.0 registered [ 1.243290] sdhci: Secure Digital Host Controller Interface driver [ 1.249834] sdhci: Copyright(c) Pierre Ossman [ 1.327207] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.334068] usbcore: registered new interface driver usbhid [ 1.339983] usbhid: USB HID core driver [ 1.348995] TCP: cubic registered [ 1.352498] NET: Registered protocol family 17 [ 1.357611] Key type dns_resolver registered [ 1.363046] ThumbEE CPU extension supported. [ 1.367641] Registering SWP/SWPB emulation handler [ 1.372678] PJ4 iWMMXt coprocessor enabled. [ 1.384904] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.439784] mmc1: BKOPS_EN bit is not set [ 1.446463] mmc1: new high speed MMC card at address 0001 [ 1.452891] mmcblk0: mmc1:0001 MMC02G 1.78 GiB [ 1.457902] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 1.464314] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 1.471306] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.477972] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.485391] libphy: 4a101000.mdio: probed [ 1.489732] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver unknown [ 1.499496] Detected MACID = bc:6a:29:7a:42:a8 [ 1.505746] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.519819] ALSA device list: [ 1.522959] No soundcards found. [ 1.527895] mmcblk0: p1 p2 [ 1.533720] mmcblk0boot1: unknown partition table [ 1.540802] mmcblk0boot0: unknown partition table [ 1.548003] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 1.557794] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 1.617377] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.625952] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 1.652733] devtmpfs: mounted [ 1.656918] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) [ 1.731764] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout
========================================================================
Board beaver-multi_v7_defconfig failure log: -------------------------------------------------
[ 3.660260] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 3.666345] pci 0000:00:01.0: bridge window [mem 0x28000000-0x280fffff 64bit pref] [ 3.674088] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.681172] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.686763] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.693146] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf002e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 472 [ 3.703137] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.713097] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.719699] [drm] No driver support for vblank timestamp query. [ 3.725657] host1x drm: No connectors reported connected with modes [ 3.731913] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.750465] Console: switching to colour frame buffer device 128x48 [ 3.762508] host1x drm: fb0: frame buffer device [ 3.767217] host1x drm: registered panic notifier [ 3.771914] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.778112] platform 7d004000.usb: Driver tegra-ehci requests probe deferral [ 3.785494] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.796833] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.802231] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.810031] tegra-ehci 7d004000.usb: irq 53, io mem 0x7d004000 [ 3.833062] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.839433] hub 1-0:1.0: USB hub found [ 3.843210] hub 1-0:1.0: 1 port detected [ 3.847551] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.852946] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.860751] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.883060] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.889350] hub 2-0:1.0: USB hub found [ 3.893134] hub 2-0:1.0: 1 port detected [ 3.901015] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.913702] ALSA device list: [ 3.916670] #0: NVIDIA Tegra Beaver [ 3.922818] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 3.932504] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 3.948387] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.956505] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 3.982693] devtmpfs: mounted [ 3.986124] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) ~$off # PYBOOT: Exception: timeout
========================================================================
Board capri-multi_v7_defconfig failure log: -------------------------------------------------
[ 0.930000] mmcblk0boot0: mmc0:0001 016G4A partition 1 2.00 MiB [ 0.930000] mmcblk0boot1: mmc0:0001 016G4A partition 2 2.00 MiB [ 0.940000] mmcblk0rpmb: mmc0:0001 016G4A partition 3 256 KiB [ 0.940000] Alternate GPT is invalid, using primary GPT. [ 0.950000] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 [ 0.950000] mmcblk0boot1: unknown partition table [ 0.960000] mmcblk0boot0: unknown partition table [ 1.010000] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null) [ 1.020000] VFS: Mounted root (ext4 filesystem) readonly on device 179:8. [ 1.020000] devtmpfs: mounted [ 1.030000] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) [ 1.050000] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 1.050000] Alignment trap: not handling instruction e1923f9f at [<c07d2054>] [ 1.050000] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 1.050000] Internal error: : 1 [#2] SMP ARM [ 1.050000] Modules linked in: [ 1.050000] CPU: 0 PID: 29042 Comm: %s [ 1.050000] Not tainted 3.14.0-12236-g39de65a #1 [ 1.050000] task: c09ab714 ti: ea838000 task.ti: 70737573 [ 1.050000] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 1.050000] LR is at __down_read_trylock+0x14/0x54 [ 1.050000] pc : [<c07d2058>] lr : [<c027cfb4>] psr: 40000193 [ 1.050000] sp : ea839f38 ip : c0b06390 fp : ea83a020 [ 1.050000] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 1.050000] r7 : c09ab714 r6 : 00000017 r5 : 20736eae r4 : 20736eaa [ 1.050000] r3 : 00000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 1.050000] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1.050000] Control: 10c5387d Table: babf404a DAC: 00000015 [ 1.050000] Process %s [ 1.050000] (pid: 29042, stack limit = 0x707377c3) [ 1.050000] Stack: (0xea839f38 to 0x70739573) [ 1.050000] [<c07d2058>] (_raw_spin_lock_irqsave) from [<c027cfb4>] (__down_read_trylock+0x14/0x54) [ 1.050000] [<c027cfb4>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c) [ 1.050000] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 1.050000] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 1.050000] ---[ end trace 01ccce6300bf521f ]--- [ 1.050000] Alignment trap: not handling instruction e1923f9f at [<c07d2054>] [ 1.050000] Unhandled fault: alignment exception (0x001) at 0x20736eae ~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie-multi_v7_defconfig failure log: -------------------------------------------------
[ 0.968913] usbcore: registered new interface driver usb-storage [ 0.976042] mousedev: PS/2 mouse device common for all mice [ 0.982900] i2c /dev entries driver [ 0.988055] usbcore: registered new interface driver uvcvideo [ 0.993869] USB Video Class driver (1.1.1) [ 0.997961] gspca_main: v2.14.0 registered [ 1.004857] sdhci: Secure Digital Host Controller Interface driver [ 1.011030] sdhci: Copyright(c) Pierre Ossman [ 1.015750] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.021871] usbcore: registered new interface driver usbhid [ 1.027464] usbhid: USB HID core driver [ 1.033885] TCP: cubic registered [ 1.037204] NET: Registered protocol family 17 [ 1.041806] Key type dns_resolver registered [ 1.046234] ThumbEE CPU extension supported. [ 1.050519] Registering SWP/SWPB emulation handler [ 1.055324] PJ4 iWMMXt coprocessor enabled. [ 1.060590] ahci-5v: 5000 mV [ 1.064057] usb1-vbus: 5000 mV [ 1.067566] usb2-vbus: 5000 mV [ 1.071248] platform 1c14000.usb: Driver ehci-platform requests probe deferral [ 1.079078] platform 1c1c000.usb: Driver ehci-platform requests probe deferral [ 1.086735] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.100073] platform 1c14000.usb: Driver ehci-platform requests probe deferral [ 1.107962] platform 1c1c000.usb: Driver ehci-platform requests probe deferral [ 3.432853] sun4i-emac 1c0b000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 3.452838] Sending DHCP requests ., OK [ 3.473279] IP-Config: Got DHCP answer from 172.16.1.1, my address is 172.16.1.173 [ 3.481057] IP-Config: Complete: [ 3.484315] device=eth0, hwaddr=08:00:08:1e:2f:44, ipaddr=172.16.1.173, mask=255.255.255.0, gw=172.16.1.1 [ 3.494320] host=172.16.1.173, domain=lixom.net, nis-domain=(none) [ 3.500926] bootserver=172.16.1.7, rootserver=172.16.1.7, rootpath= [ 3.507458] nameserver0=172.16.1.1 [ 3.511585] ALSA device list: [ 3.514565] No soundcards found. [ 3.523312] VFS: Mounted root (nfs filesystem) on device 0:11. [ 3.529576] devtmpfs: mounted [ 3.533162] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) ~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_lpae_defconfig failure log: -------------------------------------------------
[ 3.789616] ., OK [ 3.810078] IP-Config: Got DHCP answer from 172.16.1.1, my address is 172.16.1.109 [ 3.817890] IP-Config: Complete: [ 3.821162] device=eth0, hwaddr=08:00:08:1e:2f:64, ipaddr=172.16.1.109, mask=255.255.255.0, gw=172.16.1.1 [ 3.831162] host=172.16.1.109, domain=lixom.net, nis-domain=(none) [ 3.837768] bootserver=172.16.1.7, rootserver=172.16.1.7, rootpath= [ 3.844296] nameserver0=172.16.1.1 [ 3.848429] ALSA device list: [ 3.851411] No soundcards found. [ 3.860228] VFS: Mounted root (nfs filesystem) on device 0:11. [ 3.866485] devtmpfs: mounted [ 3.870105] Freeing unused kernel memory: 560K (c0a75000 - c0b01000) [ 3.893978] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 3.900786] Alignment trap: not handling instruction e1923f9f at [<c07d8ec4>] [ 3.907914] Unhandled fault: alignment exception (0x221) at 0x20736eae [ 3.914432] Internal error: : 221 [#2] SMP ARM [ 3.918869] Modules linked in: [ 3.921937] CPU: 0 PID: 29042 Comm: %s [ 3.921937] Not tainted 3.14.0-12236-g39de65a #1 [ 3.930460] task: c09b2750 ti: ea03e000 task.ti: 70737573 [ 3.935864] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 3.940912] LR is at __down_read_trylock+0x14/0x54 [ 3.945699] pc : [<c07d8ec8>] lr : [<c027dd08>] psr: 40000193 [ 3.945699] sp : ea03ffb8 ip : c0b0e3e8 fp : ea0400a0 [ 3.957159] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 3.962376] r7 : c09b2750 r6 : 00000207 r5 : 20736eae r4 : 20736eaa [ 3.968893] r3 : 20000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 3.975412] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 3.982623] Control: 30c5387d Table: 6a3ed500 DAC: fffffffd [ 3.988360] Process %s [ 3.988360] (pid: 29042, stack limit = 0x707377c3) [ 3.995659] Stack: (0xea03ffb8 to 0x70739573) [ 4.000027] [<c07d8ec8>] (_raw_spin_lock_irqsave) from [<c027dd08>] (__down_read_trylock+0x14/0x54) [ 4.009071] [<c027dd08>] (__down_read_trylock) from [<c0218010>] (do_page_fault+0x78/0x27c) [ 4.017416] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 4.023503] ---[ end trace 689d023ed820a22b ]--- [ 4.028117] Alignment trap: not handling instruction e1923f9f at [<c07d8ec4>] [ 4.035240] Unhandled fault: alignment exception (0x221) at 0x20736eae ~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_v7_defconfig failure log: -------------------------------------------------
[ 3.429955] IP-Config: Got DHCP answer from 172.16.1.1, my address is 172.16.1.109 [ 3.437786] IP-Config: Complete: [ 3.441061] device=eth0, hwaddr=08:00:08:1e:2f:64, ipaddr=172.16.1.109, mask=255.255.255.0, gw=172.16.1.1 [ 3.451061] host=172.16.1.109, domain=lixom.net, nis-domain=(none) [ 3.457666] bootserver=172.16.1.7, rootserver=172.16.1.7, rootpath= [ 3.464194] nameserver0=172.16.1.1 [ 3.468332] ALSA device list: [ 3.471312] No soundcards found. [ 3.480232] VFS: Mounted root (nfs filesystem) on device 0:11. [ 3.486509] devtmpfs: mounted [ 3.490124] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) [ 3.513685] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 3.520495] Alignment trap: not handling instruction e1923f9f at [<c07d2054>] [ 3.527622] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 3.534141] Internal error: : 1 [#2] SMP ARM [ 3.538403] Modules linked in: [ 3.541472] CPU: 0 PID: 29042 Comm: %s [ 3.541472] Not tainted 3.14.0-12236-g39de65a #1 [ 3.549995] task: c09ab714 ti: ea03c000 task.ti: 70737573 [ 3.555401] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 3.560450] LR is at __down_read_trylock+0x14/0x54 [ 3.565236] pc : [<c07d2058>] lr : [<c027cfb4>] psr: 40000193 [ 3.565236] sp : ea03df18 ip : c0b06390 fp : ea03e000 [ 3.576696] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 3.581913] r7 : c09ab714 r6 : 00000017 r5 : 20736eae r4 : 20736eaa [ 3.588430] r3 : 20000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 3.594951] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 3.602162] Control: 10c5387d Table: 6a47006a DAC: 00000015 [ 3.607899] Process %s [ 3.607899] (pid: 29042, stack limit = 0x707377c3) [ 3.615198] Stack: (0xea03df18 to 0x70739573) [ 3.619567] [<c07d2058>] (_raw_spin_lock_irqsave) from [<c027cfb4>] (__down_read_trylock+0x14/0x54) [ 3.628611] [<c027cfb4>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c) [ 3.636958] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 3.644607] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 3.650697] ---[ end trace 8cb9206db3b7b9b8 ]--- [ 3.655311] Alignment trap: not handling instruction e1923f9f at [<c07d2054>] [ 3.662434] Unhandled fault: alignment exception (0x001) at 0x20736eae ~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-sunxi_defconfig failure log: -------------------------------------------------
[ 0.017742] platform ahci-5v.2: Driver reg-fixed-voltage requests probe deferral [ 0.017766] reg-fixed-voltage usb1-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 0.017780] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.017803] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.017816] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.018768] Switched to clocksource arch_sys_counter [ 0.025784] NET: Registered protocol family 2 [ 0.026258] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.026344] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.026466] TCP: Hash tables configured (established 8192 bind 8192) [ 0.026552] TCP: reno registered [ 0.026567] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.026623] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.026830] NET: Registered protocol family 1 [ 0.027219] RPC: Registered named UNIX socket transport module. [ 0.027232] RPC: Registered udp transport module. [ 0.027238] RPC: Registered tcp transport module. [ 0.027244] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.028221] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.028692] bounce pool size: 64 pages [ 0.036501] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.036519] io scheduler noop registered [ 0.036526] io scheduler deadline registered [ 0.036707] io scheduler cfq registered (default) [ 0.038352] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.079594] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.082002] console [ttyS0] disabled [ 0.102202] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.617262] console [ttyS0] enabled [ 0.621977] mousedev: PS/2 mouse device common for all mice [ 0.627799] i2c /dev entries driver [ 0.632658] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.641650] TCP: cubic registered [ 0.644968] NET: Registered protocol family 17 [ 0.649528] Registering SWP/SWPB emulation handler [ 0.655237] ahci-5v: 5000 mV [ 0.658471] usb1-vbus: 5000 mV [ 0.661885] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout
========================================================================
Board dalmore-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.746281] input: NVIDIA Tegra Dalmore Headphones as /devices/soc0/sound.5/sound/card0/input0 [ 2.759231] TCP: cubic registered [ 2.762643] NET: Registered protocol family 17 [ 2.767705] Key type dns_resolver registered [ 2.773749] ThumbEE CPU extension supported. [ 2.778073] Registering SWP/SWPB emulation handler [ 2.782936] PJ4 iWMMXt coprocessor enabled. [ 2.793880] dvdd_ts: 1800 mV [ 2.798132] usb1_vbus: 5000 mV [ 2.801441] usb1_vbus: supplied by vdd-sys-5v0 [ 2.807306] usb2_vbus: 5000 mV [ 2.810604] usb2_vbus: supplied by vdd-sys-5v0 [ 2.816389] vdd_hdmi_5v0: 5000 mV [ 2.819946] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.829530] vdd_cam_1v8_reg: 1800 mV [ 2.846197] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.852939] [drm] No driver support for vblank timestamp query. [ 2.973922] Console: switching to colour frame buffer device 240x75 [ 3.060680] host1x drm: fb0: frame buffer device [ 3.065503] host1x drm: registered panic notifier [ 3.070287] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.078293] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.089923] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.095586] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.107356] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.132258] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.141742] hub 1-0:1.0: USB hub found [ 3.145874] hub 1-0:1.0: 1 port detected [ 3.154890] input: gpio-keys.3 as /devices/soc0/gpio-keys.3/input/input1 [ 3.166814] palmas-rtc rtc.8: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.209873] ALSA device list: [ 3.212933] #0: NVIDIA Tegra Dalmore [ 3.220595] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 3.230983] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 3.271682] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.280099] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 3.295986] devtmpfs: mounted [ 3.300645] Freeing unused kernel memory: 560K (c0a75000 - c0b01000) ~$off # PYBOOT: Exception: timeout
========================================================================
Board dalmore-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.745692] input: NVIDIA Tegra Dalmore Headphones as /devices/soc0/sound.5/sound/card0/input0 [ 2.758619] TCP: cubic registered [ 2.761968] NET: Registered protocol family 17 [ 2.767059] Key type dns_resolver registered [ 2.773151] ThumbEE CPU extension supported. [ 2.777474] Registering SWP/SWPB emulation handler [ 2.782331] PJ4 iWMMXt coprocessor enabled. [ 2.793285] dvdd_ts: 1800 mV [ 2.797556] usb1_vbus: 5000 mV [ 2.800868] usb1_vbus: supplied by vdd-sys-5v0 [ 2.806659] usb2_vbus: 5000 mV [ 2.809976] usb2_vbus: supplied by vdd-sys-5v0 [ 2.816003] vdd_hdmi_5v0: 5000 mV [ 2.819585] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.829136] vdd_cam_1v8_reg: 1800 mV [ 2.848854] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.855553] [drm] No driver support for vblank timestamp query. [ 2.986174] Console: switching to colour frame buffer device 240x75 [ 3.073067] host1x drm: fb0: frame buffer device [ 3.077825] host1x drm: registered panic notifier [ 3.082724] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.090410] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.102020] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.107676] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.118513] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.142508] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.152023] hub 1-0:1.0: USB hub found [ 3.156095] hub 1-0:1.0: 1 port detected [ 3.165143] input: gpio-keys.3 as /devices/soc0/gpio-keys.3/input/input1 [ 3.177066] palmas-rtc rtc.8: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.220003] ALSA device list: [ 3.223086] #0: NVIDIA Tegra Dalmore [ 3.230874] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 3.241080] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 3.282266] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.290504] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 3.307206] devtmpfs: mounted [ 3.311892] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) ~$off # PYBOOT: Exception: timeout
========================================================================
Board hummingboard-multi_v7_defconfig failure log: -------------------------------------------------
C1 U-Boot > tftp 0x10800000 mainline/v3.14-12236-g39de65a/multi_v7_defconfig/zImage tftp 0x10800000 mainline/v3.14-12236-g39de65a/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.111 Filename 'mainline/v3.14-12236-g39de65a/multi_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################################################### 2 MiB/s done Bytes transferred = 4649664 (46f2c0 hex) C1 U-Boot > setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 C1 U-Boot > tftp 0x11000000 mainline/v3.14-12236-g39de65a/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb tftp 0x11000000 mainline/v3.14-12236-g39de65a/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.111 Filename 'mainline/v3.14-12236-g39de65a/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb'. Load address: 0x11000000 Loading: *## 809.6 KiB/s done Bytes transferred = 25705 (6469 hex) C1 U-Boot > printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk C1 U-Boot > bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x46f2c0 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 11009468
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board omap5uevm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 46.716570] smps8: 600 <--> 1310 mV at 1040 mV [ 46.722538] smps9: 2100 mV [ 46.726347] smps10_out2: 5000 mV [ 46.730566] smps10_out1: 5000 mV [ 46.734426] ldo1: 1500 <--> 1800 mV [ 46.739011] ldo2: 2800 mV [ 46.743347] ldo3: 1500 mV [ 46.746791] ldo4: 1500 <--> 1800 mV [ 46.752038] ldo5: 1800 mV [ 46.757862] ldo6: 1200 mV [ 46.761563] ldo7: 2000 mV [ 46.765894] ldo8: 3000 mV [ 46.770088] ldo9: 1800 <--> 3000 mV at 900 mV [ 46.776240] ldoln: 1800 mV [ 46.780662] ldousb: 3250 mV [ 46.784165] REGEN1: no parameters [ 46.787714] REGEN2: no parameters [ 46.791416] regen3: no parameters [ 46.795208] SYSEN1: no parameters [ 46.798750] SYSEN2: no parameters [ 47.041353] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.048464] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.055754] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 47.101434] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.114927] ALSA device list: [ 47.118058] No soundcards found. [ 47.122085] Waiting for root device /dev/mmcblk1p2... [ 47.157921] mmc2: host does not support reading read-only switch. assuming write-enable. [ 47.168140] mmc2: new high speed SDHC card at address 0001 [ 47.174107] mmcblk1: mmc2:0001 00000 14.6 GiB [ 47.179573] mmcblk1: p1 p2 [ 47.231580] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 47.240416] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities [ 47.262987] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 47.271463] VFS: Mounted root (ext4 filesystem) readonly on device 179:50. [ 47.286055] devtmpfs: mounted [ 47.289425] Freeing unused kernel memory: 560K (c0a75000 - c0b01000) [ 47.322552] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout
========================================================================
Board omap5uevm-multi_v7_defconfig failure log: -------------------------------------------------
[ 47.604549] smps8: 600 <--> 1310 mV at 1040 mV [ 47.610524] smps9: 2100 mV [ 47.614335] smps10_out2: 5000 mV [ 47.618544] smps10_out1: 5000 mV [ 47.622410] ldo1: 1500 <--> 1800 mV [ 47.627000] ldo2: 2800 mV [ 47.631325] ldo3: 1500 mV [ 47.634786] ldo4: 1500 <--> 1800 mV [ 47.640057] ldo5: 1800 mV [ 47.645874] ldo6: 1200 mV [ 47.649549] ldo7: 2000 mV [ 47.653871] ldo8: 3000 mV [ 47.658066] ldo9: 1800 <--> 3000 mV at 900 mV [ 47.664248] ldoln: 1800 mV [ 47.668653] ldousb: 3250 mV [ 47.672149] REGEN1: no parameters [ 47.675694] REGEN2: no parameters [ 47.679387] regen3: no parameters [ 47.683182] SYSEN1: no parameters [ 47.686740] SYSEN2: no parameters [ 47.929725] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.936804] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.944074] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 47.989812] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.003275] ALSA device list: [ 48.006405] No soundcards found. [ 48.010431] Waiting for root device /dev/mmcblk1p2... [ 48.046295] mmc2: host does not support reading read-only switch. assuming write-enable. [ 48.056506] mmc2: new high speed SDHC card at address 0001 [ 48.062471] mmcblk1: mmc2:0001 00000 14.6 GiB [ 48.067939] mmcblk1: p1 p2 [ 48.119956] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 48.128799] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities [ 48.151368] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 48.159847] VFS: Mounted root (ext4 filesystem) readonly on device 179:50. [ 48.174424] devtmpfs: mounted [ 48.177804] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) [ 48.210923] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout
========================================================================
Board panda-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.764190] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.770233] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.775756] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.781219] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.786193] VDAC: 1800 mV [ 1.786193] VANA: 2100 mV [ 1.793518] VCXIO: 1800 mV [ 1.793518] VUSB: 3300 mV [ 1.800445] V1V8: 1800 mV [ 1.803985] V2V1: 2100 mV [ 1.888946] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.042541] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 2.050598] hub 1-1:1.0: USB hub found [ 2.054840] hub 1-1:1.0: 5 ports detected [ 2.060485] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 2.070007] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 2.077789] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.085723] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.279388] twl_rtc rtc.15: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.293273] ALSA device list: [ 2.296478] No soundcards found. [ 2.300628] Waiting for root device /dev/mmcblk0p2... [ 2.305206] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.307128] mmc0: new high speed SDHC card at address b368 [ 2.320343] mmcblk0: mmc0:b368 00000 7.51 GiB [ 2.326416] mmcblk0: p1 p2 [ 2.335083] omap_hsmmc 480d5000.mmc: card claims to support voltages below defined range [ 2.353240] mmc1: queuing unknown CIS tuple 0x91 (3 bytes) [ 2.359832] mmc1: new SDIO card at address 0001 [ 2.365081] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.430480] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 2.440002] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 2.462432] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.470947] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 2.486511] devtmpfs: mounted [ 2.489685] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) [ 2.494140] smsc95xx v1.0.4 [ 2.543823] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout
========================================================================
Board seaboard-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.524633] Unable to handle kernel paging request at virtual address 00003aa0 [ 2.524637] Unable to handle kernel paging request at virtual address 00003aa0 [ 2.524640] Unable to handle kernel paging request at virtual address 00003aa0 [ 2.524643] Unable to handle kernel paging request at virtual address 00003aa0 [ 2.524647] Unable to handle kernel paging request at virtual address 00003aa0 [ 2.524650] Unable to handle kernel paging request at virtual address 00003aa0 [ 2.524653] Unable to handle kernel paging request at virtual address 00003aa0 [ 2.700634] Alignment trap: not handling instruction e1923f9f at [<c07d2054>] [ 2.707755] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 2.714267] Internal error: : 1 [#2] SMP ARM [ 2.718523] Modules linked in: [ 2.721577] CPU: 0 PID: 29042 Comm: %s [ 2.721577] Not tainted 3.14.0-12236-g39de65a #1 [ 2.730092] task: c09ab714 ti: ea03a000 task.ti: 70737573 [ 2.735491] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 2.740535] LR is at __down_read_trylock+0x14/0x54 [ 2.745316] pc : [<c07d2058>] lr : [<c027cfb4>] psr: 40000193 [ 2.745316] sp : ea03bee8 ip : c0b06390 fp : ea03bfd0 [ 2.756769] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 2.761980] r7 : c09ab714 r6 : 00000017 r5 : 20736eae r4 : 20736eaa [ 2.768491] r3 : 00000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 2.775003] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 2.782209] Control: 10c5387d Table: 2a4ac04a DAC: 00000015 [ 2.787940] Process %s [ 2.787940] (pid: 29042, stack limit = 0x707377c3) [ 2.795233] Stack: (0xea03bee8 to 0x70739573) [ 2.799591] [<c07d2058>] (_raw_spin_lock_irqsave) from [<c027cfb4>] (__down_read_trylock+0x14/0x54) [ 2.808634] [<c027cfb4>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c) [ 2.816974] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 2.824628] [<c02083d4>] (do_DataAbort) from [<c0212258>] (__dabt_svc+0x38/0x60) [ 2.832005] Exception stack(0xea03bfd0 to 0xea03c018) [ 2.837046] bfc0: 0000017c 00000017 ea03c000 00000193 [ 2.845209] bfe0: ea03c018 c0217c58 00000017 00000000 0000017c 00404100 ea068000 ea03c0f0 [ 2.853370] c000: c0b06390 ea03c018 c02083d4 c0217c84 00000193 ffffffff [ 2.859974] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 2.866055] ---[ end trace e587eca25db11308 ]--- [ 2.870662] Alignment trap: not handling instruction e1923f9f at [<c07d2054>] [ 2.877780] Unhandled fault: alignment exception (0x001) at 0x20736eae ~$off # PYBOOT: Exception: timeout
========================================================================
Board snowball-multi_v7_defconfig failure log: -------------------------------------------------
node: snowball status: on *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.157 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x00100000 tmp/snowball-kHvlZp/tmpdEImZM-uImage tftp 0x00100000 tmp/snowball-kHvlZp/tmpdEImZM-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.157 Filename 'tmp/snowball-kHvlZp/tmpdEImZM-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################ done Bytes transferred = 4690977 (479421 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4690913 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board trimslice-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.688139] tegra-ehci c5008000.usb: EHCI Host Controller [ 1.693576] tegra-ehci c5008000.usb: new USB bus registered, assigned bus number 2 [ 1.701429] tegra-ehci c5008000.usb: irq 129, io mem 0xc5008000 [ 1.720132] tegra-ehci c5008000.usb: USB 2.0 started, EHCI 1.00 [ 1.726894] hub 2-0:1.0: USB hub found [ 1.730712] hub 2-0:1.0: 1 port detected [ 1.738668] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.744105] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.751938] tegra-ehci c5000000.usb: irq 52, io mem 0xc5000000 [ 1.770132] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.776915] hub 3-0:1.0: USB hub found [ 1.780766] hub 3-0:1.0: 1 port detected [ 1.785781] input: gpio-keys.2 as /devices/soc0/gpio-keys.2/input/input0 [ 1.793148] rtc-em3027 2-0056: setting system clock to 2014-04-09 17:44:43 UTC (1397065483) [ 1.805664] ALSA device list: [ 1.808631] #0: tegra-trimslice [ 1.812640] Waiting for root device /dev/sda1... [ 2.050170] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 2.201270] hub 2-1:1.0: USB hub found [ 2.205195] hub 2-1:1.0: 4 ports detected [ 2.380285] usb 3-1: new high-speed USB device number 2 using tegra-ehci [ 2.596799] usb-storage 3-1:1.0: USB Mass Storage device detected [ 2.604201] scsi0 : usb-storage 3-1:1.0 [ 2.690531] usb 2-1.1: new high-speed USB device number 3 using tegra-ehci [ 3.153572] asix 2-1.1:1.0 eth1: register 'asix' at usb-c5008000.usb-1.1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:28:b1 [ 4.493025] scsi 0:0:0:0: Direct-Access SanDisk SSD P4 8GB 0015 PQ: 0 ANSI: 0 [ 4.504490] sd 0:0:0:0: [sda] 15649196 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 4.513371] sd 0:0:0:0: [sda] Write Protect is off [ 4.519496] sd 0:0:0:0: [sda] No Caching mode page found [ 4.524889] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 4.537790] sda: sda1 [ 4.545611] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.561693] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities [ 4.571137] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities [ 4.608943] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 4.616728] VFS: Mounted root (ext4 filesystem) on device 8:1. [ 4.637266] devtmpfs: mounted [ 4.641293] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) ~$off # PYBOOT: Exception: timeout
========================================================================
Board wandboard-multi_v7_defconfig failure log: -------------------------------------------------
tftp 0x10800000 mainline/v3.14-12236-g39de65a/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.110 Filename 'mainline/v3.14-12236-g39de65a/multi_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################################################### 6.1 MiB/s done Bytes transferred = 4649664 (46f2c0 hex) => setenv serverip 172.16.1.3 setenv servenode: wandboard status: on rip 172.16.1.3 => tftp 0x11000000 mainline/v3.14-12236-g39de65a/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb tftp 0x11000000 mainline/v3.14-12236-g39de65a/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.110 Filename 'mainline/v3.14-12236-g39de65a/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb'. Load address: 0x11000000 Loading: *## 1 MiB/s done Bytes transferred = 29143 (71d7 hex) =>printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x46f2c0 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100a1d6
Starting kernel ...
~$off # PYBOOT: Exception: timeout