Tree/Branch: mainline Git describe: v3.15-11819-gc1fdb2d Failed boot tests (console logs at the end) =========================================== exynos5420-arndale-octa: FAIL: arm-exynos_defconfig ste-snowball: FAIL: arm-u8500_defconfig
Full Report ===========
arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.1 sec: PASS da850-evm 0 min 15.1 sec: PASS
arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 17.4 sec: PASS tegra30-beaver 0 min 17.4 sec: PASS
arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 17.5 sec: PASS armada-xp-openblocks-ax3-4 0 min 23.9 sec: PASS omap5-uevm 1 min 42.2 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 13.0 sec: PASS
arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 23.8 sec: PASS armada-370-mirabox 0 min 20.5 sec: PASS
arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 39.4 sec: PASS am335x-boneblack 0 min 22.0 sec: PASS omap3-beagle-xm 0 min 46.5 sec: PASS legacy,3530beagle 0 min 28.3 sec: PASS (Warnings: 1) omap4-panda 0 min 54.4 sec: PASS (Warnings: 1) omap3-overo-tobi 0 min 23.2 sec: PASS am335x-bone 0 min 28.9 sec: PASS omap3-overo-storm-tobi 0 min 22.2 sec: PASS omap5-uevm 0 min 51.5 sec: PASS (Warnings: 1) omap3-n900 0 min 17.2 sec: PASS legacy,n900 0 min 17.3 sec: PASS (Warnings: 1) omap4-panda-es 0 min 55.0 sec: PASS (Warnings: 1) legacy,3730storm 0 min 19.4 sec: PASS legacy,3530overo 0 min 20.6 sec: PASS (Warnings: 1)
arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 14.7 sec: PASS am335x-boneblack 0 min 22.1 sec: PASS sun7i-a20-cubieboard2 0 min 12.9 sec: PASS sun4i-a10-cubieboard 0 min 25.4 sec: PASS exynos5410-smdk5410 0 min 28.8 sec: PASS am335x-bone 0 min 23.7 sec: PASS tegra124-jetson-tk1 0 min 17.4 sec: PASS armada-370-mirabox 0 min 21.7 sec: PASS omap4-panda 0 min 53.9 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 13.8 sec: PASS imx6dl-wandboard,wand-dual 0 min 15.2 sec: PASS ste-snowball 1 min 14.5 sec: PASS tegra30-beaver 0 min 17.2 sec: PASS omap3-n900 0 min 16.5 sec: PASS qcom-apq8074-dragonboard 0 min 18.2 sec: PASS bcm28155-ap 0 min 25.4 sec: PASS omap3-overo-tobi 0 min 22.0 sec: PASS omap3-overo-storm-tobi 0 min 24.2 sec: PASS omap3-beagle-xm 0 min 48.4 sec: PASS exynos5420-arndale-octa 0 min 41.0 sec: PASS armada-xp-openblocks-ax3-4 0 min 24.9 sec: PASS omap5-uevm 1 min 41.5 sec: PASS (Warnings: 1) omap4-panda-es 0 min 51.3 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 31.0 sec: PASS
arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 11.9 sec: PASS sun4i-a10-cubieboard 0 min 11.5 sec: PASS
arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard 0 min 18.3 sec: PASS
arm-bcm_defconfig ----------------- bcm28155-ap 0 min 22.5 sec: PASS
arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 52.3 sec: FAIL exynos5250-arndale 0 min 30.1 sec: PASS exynos5410-smdk5410 0 min 27.3 sec: PASS
arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 15.5 sec: PASS imx6dl-wandboard,wand-solo 0 min 15.6 sec: PASS imx6q-wandboard 0 min 14.0 sec: PASS
arm-u8500_defconfig ------------------- ste-snowball 1 min 53.5 sec: FAIL
arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 26.6 sec: PASS armada-370-mirabox 0 min 22.2 sec: PASS
arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.4 sec: PASS armada-370-mirabox 0 min 20.1 sec: PASS
arm-sama5_defconfig ------------------- sama5d35ek 0 min 15.4 sec: PASS (Warnings: 1)
Console logs for failures =========================
arm-exynos_defconfig --------------------
exynos5420-arndale-octa: FAIL: last 40 lines of boot log: ---------------------------------------------------------
Loading: *################################################################# ################################################################# ############################################################### done Bytes transferred = 2823168 (2b1400 hex) ARNDALE # tftp 0x22000000 192.168.1.2:buildroot.cpio.gz tftp 0x22000000 192.168.1.2:buildroot.cpio.gz Waiting for Ethernet connection... done. Using asx0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.196 Filename 'buildroot.cpio.gz'. Load address: 0x22000000 Loading: *############################################ done Bytes transferred = 642538 (9cdea hex) ARNDALE # tftp 0x23000000 192.168.1.2:tmp/octa-9K7c11/tmpUIBub4.dtb tftp 0x23000000 192.168.1.2:tmp/octa-9K7c11/tmpUIBub4.dtb Waiting for Ethernet connection... done. Using asx0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.196 Filename 'tmp/octa-9K7c11/tmpUIBub4.dtb'. Load address: 0x23000000 Loading: *### done Bytes transferred = 32956 (80bc hex) ARNDALE # printenv bootargs printenv bootargs bootargs=console=ttySAC3,115200n8 debug earlyprintk ip=::::::none:192.168.1.254 ARNDALE # bootz 0x21000000 - 0x23000000 bootz 0x21000000 - 0x23000000 ## Flattened Device Tree blob at 23000000 Booting using the fdt blob at 0x23000000 Using Device Tree in place at 23000000, end 2300b0bb
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 52.33 seconds. # PYBOOT: Result: FAIL
arm-u8500_defconfig -------------------
ste-snowball: FAIL: last 40 lines of boot log: ----------------------------------------------
[ 3.503387] musb-hdrc musb-hdrc.20.auto: musb_init_controller failed with status -517 [ 3.511260] platform musb-hdrc.20.auto: Driver musb-hdrc requests probe deferral [ 3.519165] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.20.auto [ 3.531097] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.20.auto) status -22 [ 3.538421] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.549896] musb-ux500 musb-hdrc.20.auto: Error applying setting, reverse things back [ 3.558410] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.570343] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.577667] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.589141] musb-hdrc musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.596954] HS USB OTG: no transceiver configured [ 3.601684] musb-hdrc musb-hdrc.21.auto: musb_init_controller failed with status -517 [ 3.609527] platform musb-hdrc.21.auto: Driver musb-hdrc requests probe deferral [ 3.617462] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.629394] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.636688] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.648193] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.656707] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.668640] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.675964] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.687438] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.695251] HS USB OTG: no transceiver configured [ 3.699951] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.707824] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.715728] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.727661] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.734985] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.746459] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.754974] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.766906] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.774230] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.785705] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.793518] HS USB OTG: no transceiver configured [ 3.798217] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.806091] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.814025] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 113.47 seconds. # PYBOOT: Result: FAIL