Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.7-rc1-255-g5975b2c/
Failed boards:
arndale multi_v7_nosmp_defconfig : NO BUILD bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver arm-tegra_defconfig : FAILED 1:49.03 beaver arm-multi_v7_defconfig : FAILED 1:52.19 beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD chitra powerpc-pasemi_defconfig : BUILD FAILED colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:48.78 omap5uevm arm-omap2plus_defconfig : FAILED 2:07.10 omap5uevm arm-multi_v7_defconfig : FAILED 2:04.92 omap5uevm arm-multi_lpae_defconfig : FAILED 2:19.28 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-exynos_defconfig : FAILED 0:31.77 pi arm-multi_v7_defconfig : FAILED 1:50.12 pi arm-multi_lpae_defconfig : FAILED 1:58.12 pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard arm-imx_v6_v7_defconfig : FAILED 2:58.13 wandboard multi_v7_nosmp_defconfig : NO BUILD
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:20.88 arndale arm-exynos_defconfig : passed 2:35.61 arndale arm-multi_v7_defconfig : passed 1:34.23 arndale arm-multi_lpae_defconfig : passed 1:24.31 bbb arm-omap2plus_defconfig : passed 1:40.41 bbb arm-multi_v7_defconfig : passed 1:18.70 beagleboard-x15 arm-omap2plus_defconfig : warnings 0:51.34 beagleboard-x15 arm-multi_v7_defconfig : warnings 0:55.08 beagleboard-x15 arm-multi_lpae_defconfig : warnings 1:04.21 capri arm-bcm_defconfig : passed 0:54.94 capri arm-multi_v7_defconfig : passed 0:58.55 chitra powerpc-ppc64_defconfig : passed 2:11.64 colombus arm-sunxi_defconfig : passed 2:28.73 colombus arm-multi_v7_defconfig : passed 2:37.89 colombus arm-multi_lpae_defconfig : passed 2:37.58 cosmic arm-imx_v6_v7_defconfig : passed 3:27.90 cosmic arm-multi_v7_defconfig : passed 2:57.89 cubie arm-sunxi_defconfig : passed 0:50.03 cubie arm-multi_v7_defconfig : passed 0:58.16 cubie2 arm-sunxi_defconfig : passed 1:01.31 cubie2 arm-multi_v7_defconfig : passed 0:53.81 cubie2 arm-multi_lpae_defconfig : passed 1:00.80 cubox arm-multi_v7_defconfig : passed 1:16.08 cubox arm-mvebu_v7_defconfig : passed 1:12.90 dalmore arm-tegra_defconfig : warnings 1:27.68 dalmore arm-multi_v7_defconfig : warnings 1:27.67 dalmore arm-multi_lpae_defconfig : warnings 1:35.19 jetsontk1 arm-tegra_defconfig : warnings 0:54.79 jetsontk1 arm-multi_v7_defconfig : warnings 0:48.93 jetsontk1 arm-multi_lpae_defconfig : warnings 0:57.26 parallella arm-multi_v7_defconfig : passed 2:45.51 pit arm-exynos_defconfig : passed 2:15.75 pit arm-multi_v7_defconfig : passed 2:23.98 pit arm-multi_lpae_defconfig : passed 2:14.01 seaboard arm-tegra_defconfig : warnings 1:01.78 seaboard arm-multi_v7_defconfig : warnings 0:56.67 seattle arm64-defconfig : passed 2:15.21 snow arm-exynos_defconfig : passed 2:11.60 snow arm-multi_v7_defconfig : passed 2:01.25 snow arm-multi_lpae_defconfig : passed 2:00.83 snowball arm-u8500_defconfig : passed 1:19.66 snowball arm-multi_v7_defconfig : passed 2:41.22 trimslice arm-tegra_defconfig : warnings 1:40.93 trimslice arm-multi_v7_defconfig : warnings 1:51.17 wandboard arm-multi_v7_defconfig : passed 1:14.34
Offline boards:
colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:17.89 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:21.81 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 2:23.71 hummingboard arm-multi_v7_defconfig : OFFLINE 2:14.38 pandaes arm-omap2plus_defconfig : OFFLINE 2:14.10 pandaes arm-multi_v7_defconfig : OFFLINE 2:22.82 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:50.80 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:43.79 sama5 arm-sama5_defconfig : OFFLINE 2:21.83 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:28.73 socfpga arm-socfpga_defconfig : OFFLINE 2:19.59 socfpga arm-multi_v7_defconfig : OFFLINE 2:12.58
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 3.418068] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.425025] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.431544] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.438493] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.444077] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.450784] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.460783] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.471649] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.478283] [drm] No driver support for vblank timestamp query. [ 3.484233] drm drm: No connectors reported connected with modes [ 3.490244] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.516485] Console: switching to colour frame buffer device 128x48 [ 3.528471] drm drm: fb0: frame buffer device [ 3.543664] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.554504] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.560971] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.566382] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.574213] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.588672] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.595731] hub 1-0:1.0: USB hub found [ 3.599504] hub 1-0:1.0: 1 port detected [ 3.604440] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.609856] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.617597] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.628665] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.635626] hub 2-0:1.0: USB hub found [ 3.639394] hub 2-0:1.0: 1 port detected [ 3.649212] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.662941] vdd_sata,avdd_plle: disabling [ 3.667641] usb1_vbus: disabling [ 3.671740] Waiting for root device /dev/mmcblk0p1... [ 3.953671] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.895457] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:50]: got exception: timeout ~$off
[PYBOOT] [beaver 01:51]: Done.
========================================================================
Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------
[ 6.434201] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 6.441241] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.446843] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 6.454352] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 6.464351] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 6.477432] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.484072] [drm] No driver support for vblank timestamp query. [ 6.490077] drm drm: No connectors reported connected with modes [ 6.496100] [drm] Cannot find any crtc or sizes - going 1024x768 [ 6.523351] Console: switching to colour frame buffer device 128x48 [ 6.535165] drm drm: fb0: frame buffer device [ 6.561087] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 6.570367] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 6.576848] tegra-ehci 7d004000.usb: EHCI Host Controller [ 6.582280] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 6.590253] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 6.611085] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 6.618981] hub 1-0:1.0: USB hub found [ 6.622776] hub 1-0:1.0: 1 port detected [ 6.627582] tegra-ehci 7d008000.usb: EHCI Host Controller [ 6.633022] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 6.640921] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 6.661076] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 6.668850] hub 2-0:1.0: USB hub found [ 6.672641] hub 2-0:1.0: 1 port detected [ 6.681048] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 6.699304] vdd_sata,avdd_plle: disabling [ 6.704103] usb1_vbus: disabling [ 6.707510] ALSA device list: [ 6.710467] #0: NVIDIA Tegra Beaver [ 6.714711] Waiting for root device /dev/mmcblk0p1... [ 6.991083] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 7.991347] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:47]: got exception: timeout ~$off
[PYBOOT] [beaver 01:48]: Done.
========================================================================
Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.781213] NET: Registered protocol family 10 [ 1.781871] sit: IPv6 over IPv4 tunneling driver [ 1.786677] NET: Registered protocol family 17 [ 1.789927] NET: Registered protocol family 15 [ 1.794414] Key type dns_resolver registered [ 1.798738] Registering SWP/SWPB emulation handler [ 1.806573] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.811285] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.818703] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.825859] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.832443] [drm] No driver support for vblank timestamp query. [ 1.838360] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.844746] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.849907] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.857081] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.865834] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.875624] mmc1: new DDR MMC card at address 0001 [ 1.880569] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.884837] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.890667] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.896373] max98090 1-0010: MAX98090 REVID=0x43 [ 1.901152] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.907713] mmcblk1: p1 p2 [ 1.910114] max98090 1-0010: use default 2.8v micbias [ 1.920770] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.929256] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.963674] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.980392] VDD10_HDMI_1.0V: disabling [ 1.981079] vdd_g3d: disabling [ 1.982183] BUCK8_2.8V: disabling [ 1.986085] ALSA device list: [ 1.987804] #0: Odroid-U3 [ 1.991410] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:47]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:48]: Done.
========================================================================
Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.973136] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.979672] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.987705] ldo4: Bringing 0uV into 1800000-1800000uV [ 1.998793] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.006938] ldo9: bypassed regulator has no supply! [ 2.012063] ldo9: failed to get the current voltage(-517) [ 2.017732] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.031958] smsc95xx v1.0.4 [ 2.035988] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.059244] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.065661] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.086079] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 42:10:65:06:45:29 [ 2.105110] smps9: Bringing 0uV into 2100000-2100000uV [ 2.123829] ldo9: bypassed regulator has no supply! [ 2.128950] ldo9: failed to get the current voltage(-517) [ 2.134608] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.148698] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.182081] smps9: Bringing 0uV into 2100000-2100000uV [ 2.200727] ldo9: bypassed regulator has no supply! [ 2.205849] ldo9: failed to get the current voltage(-517) [ 2.211514] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.225994] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:02:31 UTC (946684951) [ 2.241881] pbias_mmc_omap5: disabling [ 2.245828] vmmcsdio_fixed: disabling [ 2.250379] Waiting for root device /dev/mmcblk1p2... [ 2.323485] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.459253] hub 1-2:1.0: USB hub found [ 2.463269] hub 1-2:1.0: 3 ports detected [ 2.469149] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.497222] smps9: Bringing 0uV into 2100000-2100000uV [ 2.515896] ldo9: bypassed regulator has no supply! [ 2.521018] ldo9: failed to get the current voltage(-517) [ 2.526682] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:14]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:15]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:17]: Done.
========================================================================
Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.938142] mmc0: new high speed MMC card at address 0001 [ 1.948966] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.953939] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.960322] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.969288] smsc95xx v1.0.4 [ 1.973417] smps9: Bringing 0uV into 2100000-2100000uV [ 1.981515] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.988050] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.996080] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.007212] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.015381] ldo9: bypassed regulator has no supply! [ 2.020504] ldo9: failed to get the current voltage(-517) [ 2.022931] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 92:35:e3:2d:dc:47 [ 2.037844] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.053180] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.079245] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.085652] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.112333] smps9: Bringing 0uV into 2100000-2100000uV [ 2.131388] ldo9: bypassed regulator has no supply! [ 2.136506] ldo9: failed to get the current voltage(-517) [ 2.142167] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.156780] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.172688] pbias_mmc_omap5: disabling [ 2.176645] vmmcsdio_fixed: disabling [ 2.181223] Waiting for root device /dev/mmcblk1p2... [ 2.263451] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.399228] hub 1-2:1.0: USB hub found [ 2.403238] hub 1-2:1.0: 3 ports detected [ 2.409185] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.437379] smps9: Bringing 0uV into 2100000-2100000uV [ 2.456360] ldo9: bypassed regulator has no supply! [ 2.461480] ldo9: failed to get the current voltage(-517) [ 2.467150] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:02]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:03]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:04]: Done.
========================================================================
Board omap5uevm-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 3.996457] ldo9: bypassed regulator has no supply! [ 4.001584] ldo9: failed to get the current voltage(-517) [ 4.007247] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.030205] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 4.037753] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 4.044316] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 4.050624] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.057466] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.067052] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.076546] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.083607] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 4.089741] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 4.096037] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.102889] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.112474] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.121969] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.128987] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.169913] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 4.176211] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 4.183080] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 4.192667] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 4.202152] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 4.209183] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 4.229636] smps9: Bringing 0uV into 2100000-2100000uV [ 4.257910] ldo9: bypassed regulator has no supply! [ 4.263034] ldo9: failed to get the current voltage(-517) [ 4.268707] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.288794] hctosys: unable to open rtc device (rtc0) [ 4.294113] sr_init: No PMIC hook to init smartreflex [ 4.299611] sr_init: platform driver register failed for SR [ 4.327122] pbias_mmc_omap5: disabling [ 4.331085] vmmcsdio_fixed: disabling [ 4.337274] Waiting for root device /dev/mmcblk1p2...
[PYBOOT] [omap5uevm 02:04]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:05]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:06]: Done.
========================================================================
Board pi-arm-exynos_defconfig failure log: -------------------------------------------------
[ 3.197096] exynos-drm exynos-drm: fb0: frame buffer device [ 3.215124] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 3.220161] input: gpio-keys as /devices/platform/gpio-keys/input/input2 [ 3.227634] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 3.249936] vdd_1v2_2: disabling [ 3.251871] TPS65090_RAILSDCDC3: disabling [ 3.255791] TPS65090_RAILSLDO1: disabling [ 3.259753] TPS65090_RAILSLDO2: disabling [ 3.264274] ALSA device list: [ 3.266711] #0: Peach-Pi-I2S-MAX98091 [ 3.271905] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 3.287419] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.294106] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 3.303031] devtmpfs: mounted [ 3.305075] Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
[PYBOOT] [pi 00:29]: kernel: finished booting, starting userspace. [ 3.314949] Unhandled fault: imprecise external abort (0x1406) at 0x00000000 [ 3.320511] pgd = edbc8000 [ 3.323201] [00000000] *pgd=fb82c835 [ 3.335177] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 [ 3.335177] [ 3.342826] CPU: 0 PID: 1 Comm: init Not tainted 4.7.0-rc1-00255-g5975b2c #1 [ 3.349850] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 3.355944] [<c010dfec>] (unwind_backtrace) from [<c010ad18>] (show_stack+0x10/0x14) [ 3.363649] [<c010ad18>] (show_stack) from [<c0326818>] (dump_stack+0x78/0x8c) [ 3.370851] [<c0326818>] (dump_stack) from [<c01966c0>] (panic+0xd8/0x250) [ 3.377704] [<c01966c0>] (panic) from [<c011e6a0>] (do_exit+0xa10/0xa34) [ 3.384380] [<c011e6a0>] (do_exit) from [<c011f27c>] (do_group_exit+0x3c/0xbc) [ 3.391582] [<c011f27c>] (do_group_exit) from [<c012875c>] (get_signal+0x220/0x5a4) [ 3.399214] [<c012875c>] (get_signal) from [<c010a460>] (do_signal+0xc4/0x418) [ 3.406415] [<c010a460>] (do_signal) from [<c010a958>] (do_work_pending+0x94/0xa4) [ 3.413962] [<c010a958>] (do_work_pending) from [<c0107714>] (slow_work_pending+0xc/0x20) [ 3.422129] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 [ 3.422129]
[PYBOOT] [pi 00:30]: got exception: panic ~$off
[PYBOOT] [pi 00:31]: Done.
========================================================================
Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.538876] isl29018 7-0044: No cache defaults, reading back from HW [ 1.545227] isl29018 7-0044: Failed to read 1: -6 [ 1.549812] isl29018 7-0044: regmap initialization fails: -6 [ 1.560742] NET: Registered protocol family 10 [ 1.565180] sit: IPv6 over IPv4 tunneling driver [ 1.568753] NET: Registered protocol family 17 [ 1.572763] can: controller area network core (rev 20120528 abi 9) [ 1.578953] NET: Registered protocol family 29 [ 1.583340] can: raw protocol (rev 20120528) [ 1.587590] can: broadcast manager protocol (rev 20120528 t) [ 1.593233] can: netlink gateway (rev 20130117) max_hops=1 [ 1.598959] Key type dns_resolver registered [ 1.603278] ThumbEE CPU extension supported. [ 1.607201] Registering SWP/SWPB emulation handler [ 1.617091] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.622567] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.628937] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.634313] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.644418] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.654764] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.660212] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.670399] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.676579] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.681957] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.691683] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.714393] Waiting for root device /dev/mmcblk0p1... [ 1.718271] mmc0: tuning execution failed: -5 [ 1.722327] mmc0: error -5 whilst initialising MMC card [ 2.583660] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597823] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.603288] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609659] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.615042] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:54]: got exception: timeout ~$off
[PYBOOT] [pi 01:55]: Done.
========================================================================
Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.533504] isl29018 7-0044: No cache defaults, reading back from HW [ 1.539854] isl29018 7-0044: Failed to read 1: -6 [ 1.544440] isl29018 7-0044: regmap initialization fails: -6 [ 1.555319] NET: Registered protocol family 10 [ 1.559751] sit: IPv6 over IPv4 tunneling driver [ 1.563321] NET: Registered protocol family 17 [ 1.567330] can: controller area network core (rev 20120528 abi 9) [ 1.573520] NET: Registered protocol family 29 [ 1.577908] can: raw protocol (rev 20120528) [ 1.582157] can: broadcast manager protocol (rev 20120528 t) [ 1.587800] can: netlink gateway (rev 20130117) max_hops=1 [ 1.593526] Key type dns_resolver registered [ 1.597850] ThumbEE CPU extension supported. [ 1.601768] Registering SWP/SWPB emulation handler [ 1.611613] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.617093] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.623461] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.628837] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.638934] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.649245] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.654693] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.664878] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.671060] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.676439] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.686160] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.708708] Waiting for root device /dev/mmcblk0p1... [ 1.712584] mmc0: tuning execution failed: -5 [ 1.716642] mmc0: error -5 whilst initialising MMC card [ 2.583296] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597400] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.602859] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609232] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614615] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:47]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:48]: got exception: timeout ~$off
[PYBOOT] [pi 01:49]: Done.
========================================================================
Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 20.114107] mmcblk0: error -110 sending status command, retrying [ 20.122630] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: Id "3" respawning too[ 20.135637] mmcblk0: error -110 sending status command, retrying fast: disabled for 5 minutes [ 20.146891] mmcblk0: error -110 sending status command, retrying [ 20.155644] mmcblk0: error -110 sending status command, aborting [ 20.168516] mmcblk0: error -110 sending status command, retrying [ 20.176977] mmcblk0: error -110 sending status command, retrying [ 20.185447] mmcblk0: error -110 sending status command, aborting [ 20.198297] mmcblk0: error -110 sending status command, retrying [ 20.206773] mmcblk0: error -110 sending status command, retrying [ 20.219284] mmcblk0: error -110 sending status command, aborting [ 20.236409] mmcblk0: error -110 sending status command, retrying [ 20.248934] mmcblk0: error -110 sending status command, retrying [ 20.261448] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" INIT: INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" Id "5" respawning too fast: disabled for 5 minutes INIT: Id "S1" respawning too fast: disabled for 5 minutes [ 20.310745] mmcblk0: error -110 sending status command, retrying [ 20.319222] mmcblk0: error -110 sending status command, retrying [ 20.327669] mmcblk0: error -110 sending status command, aborting [ 20.338663] mmcblk0: error -110 sending status command, retrying [ 20.347128] mmcblk0: error -110 sending status command, retrying [ 20.355560] mmcblk0: error -110 sending status command, aborting INIT: INIT: cannot execute "/sbin/getty"cannot execute "/sbin/getty" INIT: Id "2" respawning too fast: disabled for 5 minutes INIT: Id "6" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 51.004478] random: nonblocking pool is initialized
[PYBOOT] [wandboard 02:55]: Timed out waiting for "<type 'str'>":
[PYBOOT] [wandboard 02:56]: got exception: timeout ~$off
[PYBOOT] [wandboard 02:57]: Done.