Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.6-1482-g7f427d3/
Failed boards:
arndale multi_v7_nosmp_defconfig : NO BUILD bbb arm-omap2plus_defconfig : FAILED 1:54.37 bbb arm-multi_v7_defconfig : FAILED 2:00.56 bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:46.62 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:46.46 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:46.89 beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD chitra powerpc-pasemi_defconfig : BUILD FAILED colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.13 cosmic arm-multi_v7_defconfig : FAILED 2:12.52 cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore arm-tegra_defconfig : FAILED 1:49.35 dalmore arm-multi_v7_defconfig : FAILED 1:59.50 dalmore arm-multi_lpae_defconfig : FAILED 2:09.10 dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:48.21 omap5uevm arm-omap2plus_defconfig : FAILED 2:04.37 omap5uevm arm-multi_v7_defconfig : FAILED 2:06.54 omap5uevm arm-multi_lpae_defconfig : FAILED 2:07.39 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-multi_v7_defconfig : FAILED 1:55.52 pi arm-multi_lpae_defconfig : FAILED 1:56.56 pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball arm-u8500_defconfig : FAILED 1:55.46 snowball arm-multi_v7_defconfig : FAILED 3:20.17 snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard arm-imx_v6_v7_defconfig : FAILED 2:57.78 wandboard multi_v7_nosmp_defconfig : NO BUILD
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:13.09 arndale arm-exynos_defconfig : passed 1:31.08 arndale arm-multi_v7_defconfig : passed 1:26.19 arndale arm-multi_lpae_defconfig : passed 1:29.97 capri arm-bcm_defconfig : passed 0:49.09 capri arm-multi_v7_defconfig : passed 0:45.50 chitra powerpc-ppc64_defconfig : passed 2:05.32 colombus arm-sunxi_defconfig : passed 2:22.19 colombus arm-multi_v7_defconfig : passed 2:37.46 colombus arm-multi_lpae_defconfig : passed 2:32.37 cubie arm-sunxi_defconfig : passed 0:51.45 cubie arm-multi_v7_defconfig : passed 0:53.44 cubie2 arm-sunxi_defconfig : passed 0:49.51 cubie2 arm-multi_v7_defconfig : passed 0:56.52 cubie2 arm-multi_lpae_defconfig : passed 0:59.08 cubox arm-multi_v7_defconfig : passed 1:22.73 cubox arm-mvebu_v7_defconfig : passed 1:00.86 hummingboard arm-imx_v6_v7_defconfig : passed 1:23.57 hummingboard arm-multi_v7_defconfig : passed 1:20.72 jetsontk1 arm-tegra_defconfig : passed 1:32.33 jetsontk1 arm-multi_v7_defconfig : passed 1:35.07 jetsontk1 arm-multi_lpae_defconfig : passed 1:50.78 pandaes arm-omap2plus_defconfig : warnings 1:30.96 pandaes arm-multi_v7_defconfig : passed 1:44.43 pi arm-exynos_defconfig : passed 2:10.93 pit arm-exynos_defconfig : passed 2:13.30 pit arm-multi_v7_defconfig : passed 2:11.64 pit arm-multi_lpae_defconfig : passed 2:19.30 seattle arm64-defconfig : warnings 2:32.72 snow arm-exynos_defconfig : passed 2:06.78 snow arm-multi_v7_defconfig : passed 2:00.72 snow arm-multi_lpae_defconfig : passed 1:59.55 trimslice arm-tegra_defconfig : passed 2:40.88 trimslice arm-multi_v7_defconfig : passed 1:40.37 wandboard arm-multi_v7_defconfig : passed 1:24.60
Offline boards:
beaver arm-tegra_defconfig : OFFLINE 2:12.71 beaver arm-multi_v7_defconfig : OFFLINE 2:18.72 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 2:14.02 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 2:18.95 parallella arm-multi_v7_defconfig : OFFLINE 2:31.96 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:45.89 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:45.03 sama5 arm-sama5_defconfig : OFFLINE 2:25.60 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:15.19 seaboard arm-tegra_defconfig : OFFLINE 2:16.13 seaboard arm-multi_v7_defconfig : OFFLINE 2:18.47 socfpga arm-socfpga_defconfig : OFFLINE 2:17.56 socfpga arm-multi_v7_defconfig : OFFLINE 2:17.11
Board legend is available at http://arm-soc.lixom.net/boards.html
Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.558084] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.623815] Synopsys Designware Multimedia Card Interface Driver [ 1.631678] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.641849] ledtrig-cpu: registered to indicate activity on CPUs [ 1.648922] usbcore: registered new interface driver usbhid [ 1.654848] usbhid: USB HID core driver [ 1.666817] NET: Registered protocol family 10 [ 1.673381] sit: IPv6 over IPv4 tunneling driver [ 1.679524] NET: Registered protocol family 17 [ 1.684291] can: controller area network core (rev 20120528 abi 9) [ 1.690930] NET: Registered protocol family 29 [ 1.695650] can: raw protocol (rev 20120528) [ 1.700171] can: broadcast manager protocol (rev 20120528 t) [ 1.706174] can: netlink gateway (rev 20130117) max_hops=1 [ 1.712920] Key type dns_resolver registered [ 1.717809] omap_voltage_late_init: Voltage driver support not added [ 1.724782] ThumbEE CPU extension supported. [ 1.729346] Registering SWP/SWPB emulation handler [ 1.773883] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.780443] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.788170] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.796856] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.804778] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.812652] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.820471] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.827820] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.834931] hctosys: unable to open rtc device (rtc0) [ 1.848326] Waiting for root device /dev/mmcblk0p2... [ 1.854081] mmc1: new high speed MMC card at address 0001 [ 1.860865] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.866155] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.872817] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.881417] mmcblk1: p1 p2
[PYBOOT] [bbb 01:57]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:58]: got exception: timeout ~$off
[PYBOOT] [bbb 02:00]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.062839] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.068968] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.075305] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.082191] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.091799] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.101313] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.108340] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.151567] ledtrig-cpu: registered to indicate activity on CPUs [ 2.160313] oprofile: using arm/armv7 [ 2.165444] Initializing XFRM netlink socket [ 2.170552] NET: Registered protocol family 10 [ 2.181563] sit: IPv6 over IPv4 tunneling driver [ 2.190463] NET: Registered protocol family 17 [ 2.195412] NET: Registered protocol family 15 [ 2.200662] Key type dns_resolver registered [ 2.205543] omap_voltage_late_init: Voltage driver support not added [ 2.212294] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.220845] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.230443] ThumbEE CPU extension supported. [ 2.235092] Registering SWP/SWPB emulation handler [ 2.240140] SmartReflex Class3 initialized [ 2.310393] mmc1: new high speed MMC card at address 0001 [ 2.323537] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.333192] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.344322] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.360139] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.367545] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.379649] mmcblk1: p1 p2 [ 2.387890] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.405580] hctosys: unable to open rtc device (rtc0) [ 2.411095] sr_init: No PMIC hook to init smartreflex [ 2.416784] sr_init: platform driver register failed for SR [ 2.461758] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:52]: got exception: timeout ~$off
[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.726256] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.740950] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.748030] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.770639] rtc-ds1307 2-006f: SET TIME! [ 1.776412] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.783168] rtc-ds1307 2-006f: 64 bytes nvram [ 1.787778] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.795981] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.801771] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.810027] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.819199] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.826066] hub 1-0:1.0: USB hub found [ 1.830020] hub 1-0:1.0: 1 port detected [ 1.834425] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.840207] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.848317] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.857334] hub 2-0:1.0: USB hub found [ 1.861307] hub 2-0:1.0: 1 port detected [ 1.867331] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.931682] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.949738] aic_dvdd_fixed: disabling [ 1.954478] Waiting for root device /dev/mmcblk0p1... [ 1.987230] mmc1: new high speed MMC card at address 0001 [ 1.993260] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.998181] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.004542] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.011479] mmcblk1: p1 [ 2.140146] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.175173] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.200452] hub 2-1:1.0: USB hub found [ 2.204419] hub 2-1:1.0: 4 ports detected [ 2.296457] hub 1-1:1.0: USB hub found [ 2.300444] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:44]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:45]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:46]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.725843] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.740529] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.747605] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.770608] rtc-ds1307 2-006f: SET TIME! [ 1.776347] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.783096] rtc-ds1307 2-006f: 64 bytes nvram [ 1.787702] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.795900] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.801689] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.809941] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.819102] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.825972] hub 1-0:1.0: USB hub found [ 1.829927] hub 1-0:1.0: 1 port detected [ 1.834325] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.840107] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.848217] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.857229] hub 2-0:1.0: USB hub found [ 1.861191] hub 2-0:1.0: 1 port detected [ 1.867236] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.931629] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.949224] aic_dvdd_fixed: disabling [ 1.953967] Waiting for root device /dev/mmcblk0p1... [ 1.977192] mmc1: new high speed MMC card at address 0001 [ 1.983218] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.988130] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.994486] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.001385] mmcblk1: p1 [ 2.140113] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.175143] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.200346] hub 2-1:1.0: USB hub found [ 2.204317] hub 2-1:1.0: 4 ports detected [ 2.296351] hub 1-1:1.0: USB hub found [ 2.300341] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:43]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:44]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:45]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.217392] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.223693] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.230589] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.240985] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.245852] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.252147] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.259008] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.268606] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.278112] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.285174] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.335622] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.341918] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.348789] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.358380] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.367873] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.374926] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.381043] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.387354] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.394191] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.403787] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.413284] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.420320] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.465757] hctosys: unable to open rtc device (rtc0) [ 2.471050] sr_init: No PMIC hook to init smartreflex [ 2.476565] sr_init: platform driver register failed for SR [ 2.522823] aic_dvdd_fixed: disabling [ 2.527057] ldousb: disabling [ 2.536444] Waiting for root device /dev/mmcblk0p1... [ 2.587289] mmc1: new high speed MMC card at address 0001 [ 2.595267] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.600622] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.607506] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.615953] mmcblk1: p1
[PYBOOT] [beagleboard-x15 01:43]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:44]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:46]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 14.458573] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.532800] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.543127] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.617350] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.627668] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.701896] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.712218] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.786439] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.796764] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.870935] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.881266] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.955482] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.965808] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.040003] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.050362] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.124586] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.134909] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.209072] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.219393] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.293622] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.303946] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.378182] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.388530] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.462754] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.473080] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.547305] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.557626] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.631847] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.642170] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.716394] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.726716] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.800876] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.811200] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 14.075601] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.149584] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.159662] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.233642] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.243722] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.317702] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.327782] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.401765] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.411842] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.485826] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.495913] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.569894] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.579965] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.653952] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.664027] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.738017] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.748086] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.822071] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.832145] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.906128] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.916206] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.990250] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.000318] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.074298] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.084377] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.158361] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.168437] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.242415] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.252489] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.326480] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.336557] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.410542] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.420627] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:09]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:10]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:11]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.620981] can: netlink gateway (rev 20130117) max_hops=1 [ 2.628116] Key type dns_resolver registered [ 2.634575] ThumbEE CPU extension supported. [ 2.639013] Registering SWP/SWPB emulation handler [ 2.656162] usb1_vbus: supplied by vdd-sys-5v0 [ 2.681698] usb2_vbus: supplied by vdd-sys-5v0 [ 2.695227] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.717748] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.724506] [drm] No driver support for vblank timestamp query. [ 2.742493] mmc1: new high speed MMC card at address 0001 [ 2.750166] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.757242] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.765726] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.774416] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.785195] mmcblk1: p1 [ 2.903489] Console: switching to colour frame buffer device 240x75 [ 2.989996] drm drm: fb0: frame buffer device [ 3.012349] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.027315] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.032908] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.041831] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.057388] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.067709] hub 1-0:1.0: USB hub found [ 3.071808] hub 1-0:1.0: 1 port detected [ 3.081821] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.095589] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.157656] dvdd_ts: disabling [ 3.160756] usb1_vbus: disabling [ 3.164116] vdd_cam_1v8_reg: disabling [ 3.171458] Waiting for root device /dev/mmcblk0p1... [ 3.382431] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.344207] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 58.755156] random: nonblocking pool is initialized
[PYBOOT] [dalmore 02:06]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 02:07]: got exception: timeout ~$off
[PYBOOT] [dalmore 02:08]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.623468] can: netlink gateway (rev 20130117) max_hops=1 [ 2.630532] Key type dns_resolver registered [ 2.636995] ThumbEE CPU extension supported. [ 2.641428] Registering SWP/SWPB emulation handler [ 2.654874] usb1_vbus: supplied by vdd-sys-5v0 [ 2.662547] usb2_vbus: supplied by vdd-sys-5v0 [ 2.681489] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.702422] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.709194] [drm] No driver support for vblank timestamp query. [ 2.729580] mmc1: new high speed MMC card at address 0001 [ 2.738752] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.745985] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.753165] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.761758] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.771492] mmcblk1: p1 [ 2.886262] Console: switching to colour frame buffer device 240x75 [ 2.973021] drm drm: fb0: frame buffer device [ 2.988301] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.002848] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.008534] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.017212] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.033431] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.043782] hub 1-0:1.0: USB hub found [ 3.047779] hub 1-0:1.0: 1 port detected [ 3.058516] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.073229] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.135058] dvdd_ts: disabling [ 3.138305] usb1_vbus: disabling [ 3.141567] vdd_cam_1v8_reg: disabling [ 3.149095] Waiting for root device /dev/mmcblk0p1... [ 3.363741] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.342004] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 64.885142] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:57]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:58]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------
[ 2.908785] Bluetooth: RFCOMM socket layer initialized [ 2.914002] Bluetooth: RFCOMM ver 1.11 [ 2.918185] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.923583] Bluetooth: BNEP socket layer initialized [ 2.928693] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.934693] Bluetooth: HIDP socket layer initialized [ 2.941410] Key type dns_resolver registered [ 2.950982] Registering SWP/SWPB emulation handler [ 2.969381] usb1_vbus: supplied by vdd-sys-5v0 [ 2.978891] usb2_vbus: supplied by vdd-sys-5v0 [ 2.994551] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 3.021831] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.028673] [drm] No driver support for vblank timestamp query. [ 3.206713] Console: switching to colour frame buffer device 240x75 [ 3.293901] drm drm: fb0: frame buffer device [ 3.327881] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.337153] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.343000] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.353416] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.377888] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.391998] hub 1-0:1.0: USB hub found [ 3.396021] hub 1-0:1.0: 1 port detected [ 3.410121] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.425366] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.515188] dvdd_ts: disabling [ 3.518423] usb1_vbus: disabling [ 3.521703] vdd_cam_1v8_reg: disabling [ 3.526361] ALSA device list: [ 3.529456] #0: NVIDIA Tegra Dalmore [ 3.535252] Waiting for root device /dev/mmcblk0p1... [ 3.717889] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.752304] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 48.087844] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:47]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:48]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.826099] dwmmc_exynos 12550000.mmc: DW MMC controller at irq 107,32 bit host data width,128 deep fifo [ 1.835727] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.867899] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.869090] usbcore: registered new interface driver usbhid [ 1.873301] usbhid: USB HID core driver [ 1.884069] NET: Registered protocol family 10 [ 1.884690] sit: IPv6 over IPv4 tunneling driver [ 1.887966] NET: Registered protocol family 17 [ 1.891925] NET: Registered protocol family 15 [ 1.896402] Key type dns_resolver registered [ 1.900715] Registering SWP/SWPB emulation handler [ 1.911549] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.911657] s3c-rtc 10070000.rtc: warning: invalid RTC value so initializing it [ 1.918950] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.948434] max98090 1-0010: MAX98090 REVID=0x43 [ 1.950689] max98090 1-0010: use default 2.8v micbias [ 1.953349] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.962346] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.972218] mmc1: new DDR MMC card at address 0001 [ 1.980998] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.983317] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.987641] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.993559] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.994254] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.006118] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 2.012573] mmcblk1: p1 p2 [ 2.044171] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 2.060510] VDD10_HDMI_1.0V: disabling [ 2.061196] vdd_g3d: disabling [ 2.062271] BUCK8_2.8V: disabling [ 2.0n6241] ALSA device list: [ 2.067919] #0: Odroid-U3 [ 2.071519] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:46]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:47]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.968492] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.975037] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.983063] ldo4: Bringing 0uV into 1800000-1800000uV [ 1.994152] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.002343] ldo9: bypassed regulator has no supply! [ 2.007455] ldo9: failed to get the current voltage(-517) [ 2.013123] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.027320] smsc95xx v1.0.4 [ 2.031328] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.055080] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.061465] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.078802] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 0a:be:53:a8:d7:11 [ 2.097767] smps9: Bringing 0uV into 2100000-2100000uV [ 2.116514] ldo9: bypassed regulator has no supply! [ 2.121630] ldo9: failed to get the current voltage(-517) [ 2.127299] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.141305] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.172940] smps9: Bringing 0uV into 2100000-2100000uV [ 2.191648] ldo9: bypassed regulator has no supply! [ 2.196762] ldo9: failed to get the current voltage(-517) [ 2.202427] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.216905] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:02:21 UTC (946684941) [ 2.232569] pbias_mmc_omap5: disabling [ 2.236522] vmmcsdio_fixed: disabling [ 2.241089] Waiting for root device /dev/mmcblk1p2... [ 2.319330] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.455104] hub 1-2:1.0: USB hub found [ 2.459121] hub 1-2:1.0: 3 ports detected [ 2.464840] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.493134] smps9: Bringing 0uV into 2100000-2100000uV [ 2.511943] ldo9: bypassed regulator has no supply! [ 2.517075] ldo9: failed to get the current voltage(-517) [ 2.522748] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:04]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:05]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:06]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.897753] palmas 0-0048: Irq flag is 0x00000000 [ 1.917199] smsc95xx v1.0.4 [ 1.926948] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 1.937761] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.952383] smps6: Bringing 1350000uV into 1200000-1200000uV [ 1.962680] smps9: Bringing 0uV into 2100000-2100000uV [ 1.968864] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, da:7f:2a:39:ff:e4 [ 1.982470] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.989006] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.997055] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.008128] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.016305] ldo9: bypassed regulator has no supply! [ 2.021425] ldo9: failed to get the current voltage(-517) [ 2.027089] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.042194] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.065073] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.071436] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.098262] smps9: Bringing 0uV into 2100000-2100000uV [ 2.117230] ldo9: bypassed regulator has no supply! [ 2.122343] ldo9: failed to get the current voltage(-517) [ 2.128014] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.142533] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.158110] pbias_mmc_omap5: disabling [ 2.162051] vmmcsdio_fixed: disabling [ 2.166590] Waiting for root device /dev/mmcblk1p2... [ 2.214326] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.350155] hub 1-2:1.0: USB hub found [ 2.354173] hub 1-2:1.0: 3 ports detected [ 2.360083] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.388183] smps9: Bringing 0uV into 2100000-2100000uV [ 2.407187] ldo9: bypassed regulator has no supply! [ 2.412309] ldo9: failed to get the current voltage(-517) [ 2.417974] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:04]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:05]: Done. Board omap5uevm-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.408919] ldo9: bypassed regulator has no supply! [ 2.414054] ldo9: failed to get the current voltage(-517) [ 2.419720] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.442565] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.450093] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.456687] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.462989] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.469866] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.479463] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.488964] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.496030] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.502154] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.508471] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.515326] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.524921] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.534410] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.541436] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.584687] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 2.590988] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 2.597859] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 2.607451] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 2.616947] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 2.623982] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 2.645541] smps9: Bringing 0uV into 2100000-2100000uV [ 2.675123] ldo9: bypassed regulator has no supply! [ 2.680234] ldo9: failed to get the current voltage(-517) [ 2.685918] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.706012] hctosys: unable to open rtc device (rtc0) [ 2.711316] sr_init: No PMIC hook to init smartreflex [ 2.716835] sr_init: platform driver register failed for SR [ 2.745393] pbias_mmc_omap5: disabling [ 2.749335] vmmcsdio_fixed: disabling [ 2.755485] Waiting for root device /dev/mmcblk1p2...
[PYBOOT] [omap5uevm 02:01]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:02]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:03]: Done. Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.527981] isl29018 7-0044: No cache defaults, reading back from HW [ 1.534324] isl29018 7-0044: Failed to read 1: -6 [ 1.538910] isl29018 7-0044: regmap initialization fails: -6 [ 1.549180] NET: Registered protocol family 10 [ 1.553624] sit: IPv6 over IPv4 tunneling driver [ 1.557209] NET: Registered protocol family 17 [ 1.561212] can: controller area network core (rev 20120528 abi 9) [ 1.567399] NET: Registered protocol family 29 [ 1.571791] can: raw protocol (rev 20120528) [ 1.576040] can: broadcast manager protocol (rev 20120528 t) [ 1.581681] can: netlink gateway (rev 20130117) max_hops=1 [ 1.587409] Key type dns_resolver registered [ 1.591731] ThumbEE CPU extension supported. [ 1.595631] Registering SWP/SWPB emulation handler [ 1.605459] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.610950] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.617307] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.622681] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.632766] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.642974] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.648416] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.658603] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.664782] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.670161] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.679880] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.702167] Waiting for root device /dev/mmcblk0p1... [ 1.706051] mmc0: tuning execution failed: -5 [ 1.710079] mmc0: error -5 whilst initialising MMC card [ 2.572797] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.586792] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.592256] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.598629] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.604012] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:54]: got exception: timeout ~$off
[PYBOOT] [pi 01:56]: Done. Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.522499] isl29018 7-0044: No cache defaults, reading back from HW [ 1.528843] isl29018 7-0044: Failed to read 1: -6 [ 1.533426] isl29018 7-0044: regmap initialization fails: -6 [ 1.543664] NET: Registered protocol family 10 [ 1.548112] sit: IPv6 over IPv4 tunneling driver [ 1.551694] NET: Registered protocol family 17 [ 1.555694] can: controller area network core (rev 20120528 abi 9) [ 1.561880] NET: Registered protocol family 29 [ 1.566273] can: raw protocol (rev 20120528) [ 1.570521] can: broadcast manager protocol (rev 20120528 t) [ 1.576164] can: netlink gateway (rev 20130117) max_hops=1 [ 1.581886] Key type dns_resolver registered [ 1.586214] ThumbEE CPU extension supported. [ 1.590113] Registering SWP/SWPB emulation handler [ 1.599899] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.605386] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.611745] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.617120] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.627200] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.637381] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.642830] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.653016] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.659195] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.664573] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.674294] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.696350] Waiting for root device /dev/mmcblk0p1... [ 1.700196] mmc0: tuning execution failed: -5 [ 1.704290] mmc0: error -5 whilst initialising MMC card [ 2.572328] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.586309] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.591768] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.598142] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.603525] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:53]: got exception: timeout ~$off
[PYBOOT] [pi 01:54]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.937072] ledtrig-cpu: registered to indicate activity on CPUs [ 1.943542] usbcore: registered new interface driver usbhid [ 1.949127] usbhid: USB HID core driver [ 1.958557] NET: Registered protocol family 10 [ 1.964111] sit: IPv6 over IPv4 tunneling driver [ 1.969451] NET: Registered protocol family 17 [ 1.973907] can: controller area network core (rev 20120528 abi 9) [ 1.980163] NET: Registered protocol family 29 [ 1.984619] can: raw protocol (rev 20120528) [ 1.988922] can: broadcast manager protocol (rev 20120528 t) [ 1.994598] can: netlink gateway (rev 20130117) max_hops=1 [ 2.000640] Key type dns_resolver registered [ 2.005157] ThumbEE CPU extension supported. [ 2.009460] Registering SWP/SWPB emulation handler [ 2.020324] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.027160] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.036437] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.043426] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.050415] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.057403] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.071380] db8500-esram12: disabling [ 2.075164] db8500-esram34: disabling [ 2.079162] V-CSI/DSI: disabling [ 2.082458] mmci-reg: disabling [ 2.086212] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.092224] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.098632] Waiting for root device /dev/mmcblk0p4... [ 2.138549] mmc3: new high speed MMC card at address 0001 [ 2.144531] mmcblk3: mmc3:0001 3.53 GiB [ 2.148773] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.154388] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.160003] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.166503] mmcblk3: p1 p2 p3 p4
[PYBOOT] [snowball 03:17]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 03:18]: got exception: timeout ~$off
[PYBOOT] [snowball 03:19]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 2.646881] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.656768] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.667510] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.691619] NET: Registered protocol family 10 [ 2.697052] sit: IPv6 over IPv4 tunneling driver [ 2.702606] NET: Registered protocol family 17 [ 2.707092] NET: Registered protocol family 35 [ 2.711669] NET: Registered protocol family 37 [ 2.716217] Registering SWP/SWPB emulation handler [ 2.722656] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.728820] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.735534] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.742675] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-28 16:29:23 UTC (956939363) [ 2.751922] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.758911] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.765899] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.772888] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.786346] db8500-esram12: disabling [ 2.790100] db8500-esram34: disabling [ 2.794006] V-CSI/DSI: disabling [ 2.797271] mmci-reg: disabling [ 2.800598] ALSA device list: [ 2.803558] #0: MOP500-card [ 2.806884] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.812866] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.819061] Waiting for root device /dev/mmcblk0p4... [ 65.300170] random: nonblocking pool is initialized cu: Got hangup signal Connected. cu: waitpid: No child processes
[PYBOOT] [snowball 01:52]: Timed out waiting for "<type 'str'>": Connected.
Disconnected.
[PYBOOT] [snowball 01:53]: got exception: timeout ~$off
[PYBOOT] [snowball 01:54]: Done. Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
INIT: cannot execute "/sbin[ 20.028962] mmcblk0: error -110 sending status command, retrying /getty" INIT: cannot execute "[ 20.040223] mmcblk0: error -110 sending status command, retrying /sbin/getty" INIT: Id "5" resp[ 20.049094] mmcblk0: error -110 sending status command, aborting awning too fast: disabled for 5 minutes [ 20.060598] mmcblk0: error -110 sending status command, retrying [ 20.069077] mmcblk0: error -110 sending status command, retrying [ 20.077530] mmcblk0: error -110 sending status command, aborting [ 20.088580] mmcblk0: error -110 sending status command, retrying [ 20.096995] mmcblk0: error -110 sending status command, retrying [ 20.105497] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/gett[ 20.116719] mmcblk0: error -110 sending status command, retrying y" [ 20.125444] mmcblk0: error -110 sending status command, retrying [ 20.133864] mmcblk0: error -110 sending status command, aborting INIT: INIT: cannot execute "/sbin/gett[ 20.145306] mmcblk0: error -110 sending status command, retrying y"cannot execute "/sbin/getty" [ 20.154026] mmcblk0: error -110 sending status command, retrying
INIT: Id "4" respawning too f[ 20.162950] mmcblk0: error -110 sending status command, aborting ast: disabled for 5 minutes [ 20.174424] mmcblk0: error -110 sending status command, retrying [ 20.182875] mmcblk0: error -110 sending status command, retrying [ 20.191315] mmcblk0: error -110 sending status command, aborting INIT: INIT: cannot execute "/sbin/getty"cannot execute "/sbin/getty"
INIT: cannot execute "/sbin/getty"INIT: Id "6" respawning too fast: disabled for 5 minutes INIT: Id "S1" respawning too fast: disabled for 5 minutes INIT: Id "3" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 57.975286] random: nonblocking pool is initialized
[PYBOOT] [wandboard 02:55]: Timed out waiting for "<type 'str'>":
[PYBOOT] [wandboard 02:56]: got exception: timeout ~$off
[PYBOOT] [wandboard 02:57]: Done.