Automated DT boot report for various ARM defconfigs.
Tree/Branch: next Git describe: next-20140228 Failed boot tests (console logs at the end) =========================================== ste-snowball: FAIL: multi_v7_defconfig da850-evm: FAIL: davinci_all_defconfig
Full Report ===========
da8xx_omapl_defconfig --------------------- da850-evm PASS: 0 min 15.4 sec
omap2plus_defconfig ------------------- legacy,3730xm PASS: 0 min 50.1 sec am335x-boneblack PASS: 0 min 25.9 sec omap3-beagle-xm PASS: 0 min 56.9 sec legacy,3530beagle PASS: 0 min 51.0 sec omap4-panda PASS: 1 min 8.0 sec omap3-overo-tobi PASS: 0 min 23.5 sec am335x-bone PASS: 0 min 27.5 sec omap3-overo-storm-tobi PASS: 0 min 22.5 sec omap5-uevm PASS: 1 min 3.5 sec omap4-panda-es PASS: 1 min 6.7 sec legacy,3730storm PASS: 0 min 23.6 sec legacy,3530overo PASS: 0 min 21.4 sec
multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 46.4 sec sun7i-a20-cubieboard2 PASS: 0 min 14.4 sec
tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.1 sec
imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.5 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.6 sec imx6q-wandboard PASS: 0 min 17.0 sec
sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 12.9 sec sun4i-a10-cubieboard PASS: 0 min 12.6 sec
bcm_defconfig ------------- bcm28155-ap PASS: 0 min 58.8 sec
mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 PASS: 0 min 22.2 sec armada-370-mirabox PASS: 0 min 20.2 sec
exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 27.9 sec
multi_v7_defconfig ------------------ qcom-apq8074-dragonboard PASS: 1 min 4.2 sec ste-snowball FAIL: 0 min 33.7 sec tegra30-beaver PASS: 0 min 17.1 sec am335x-boneblack PASS: 0 min 23.8 sec omap3-beagle-xm PASS: 0 min 46.6 sec sun7i-a20-cubieboard2 PASS: 0 min 14.5 sec armada-370-mirabox PASS: 0 min 22.3 sec omap4-panda PASS: 1 min 17.0 sec armada-xp-openblocks-ax3-4 PASS: 0 min 26.1 sec sun4i-a10-cubieboard PASS: 0 min 19.2 sec bcm28155-ap PASS: 1 min 9.3 sec omap3-overo-tobi PASS: 0 min 21.8 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.2 sec am335x-bone PASS: 0 min 26.6 sec omap3-overo-storm-tobi PASS: 0 min 24.2 sec omap5-uevm PASS: 1 min 42.8 sec imx6q-wandboard PASS: 0 min 17.6 sec omap4-panda-es PASS: 0 min 53.6 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.3 sec
u8500_defconfig --------------- ste-snowball PASS: 0 min 30.9 sec
sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.1 sec
davinci_all_defconfig --------------------- legacy,dm365evm PASS: 0 min 17.0 sec da850-evm FAIL: 0 min 21.0 sec
Console logs for failures =========================
multi_v7_defconfig ------------------
ste-snowball: FAIL: last 80 lines of boot log: ----------------------------------------------
(user:khilman) Reboot snowball Reboot: snowball ; ip9258 2 2 : ('off', 6, 'on') , sleep 6,
MCDE: startup failed sec_bridge: ISSWAPI_FLUSH_BOOT_CODE: 2 EMMC: 0, MMC: 1 In: serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 1 0
U8500 $ U8500 $ version
U8500 $ versionsetenv ethaddr 6e:e6:84:36:8e:9e
U-Boot 2009.11 (sept. 19 2011 - 17:03:11) U8500 $ setenv ethaddr 6e:e6:84:36:8e:9esetenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4
Can't overwrite "ethaddr" U8500 $ setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
U8500 $ setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'if test -n ${initenv}; then run initenv; fi
U8500 $ if test -n ${initenv}; then run initenv; fiif test -n ${preboot}; then run preboot; fi
U8500 $ if test -n ${preboot}; then run preboot; fisetenv autoload no; setenv autoboot no
U8500 $ setenv autoload no; setenv autoboot nodhcp
U8500 $ dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.159 U8500 $ setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U8500 $ if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U8500 $ tftp 0x00800000 192.168.1.2:tmp/snowball-1L1fvV/tmpOs8QC6-uImage tftp 0x00800000 192.168.1.2:tmp/snowball-1L1fvV/tmpOs8QC6-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'tmp/snowball-1L1fvV/tmpOs8QC6-uImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################################### done Bytes transferred = 4587585 (460041 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4587521 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 33.68 seconds. # PYBOOT: Result: FAIL
davinci_all_defconfig ---------------------
da850-evm: FAIL: last 80 lines of boot log: -------------------------------------------
Err: serial SF: Detected M25P64 with page size 256 Bytes, erase size 64 KiB, total 8 MiB Net: DaVinci-EMAC Hit any key to stop autoboot: 3 0 U-Boot > U-Boot > version version
U-Boot 2014.01-dirty (Feb 27 2014 - 15:12:48) arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.3-1ubuntu1) 4.7.3 GNU ld (GNU Binutils for Ubuntu) 2.23.52.20130913 U-Boot > setenv bootargs console=ttyS2,115200n8 debug earlyprintk setenv bootargs console=ttyS2,115200n8 debug earlyprintk U-Boot >if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi U-Boot > if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U-Boot >setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot > dhcp dhcp BOOTP broadcast 1 DHCP client bound to address 192.168.1.194 U-Boot >setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U-Boot > if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U-Boot > tftp 0xc0800000 192.168.1.2:tmp/da850evm-Ks80k6/zImage tftp 0xc0800000 192.168.1.2:tmp/da850evm-Ks80k6/zImage Using DaVinci-EMAC device TFTP from server 192.168.1.2; our IP address is 192.168.1.194 Filename 'tmp/da850evm-Ks80k6/zImage'. Load address: 0xc0800000 Loading: *################################################################# ################################################################# ################ 1.7 MiB/s done Bytes transferred = 2135008 (2093e0 hex) U-Boot > tftp 0xc0c00000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0xc0c00000 192.168.1.2:buildroot.cpio.gz.uboot Using DaVinci-EMAC device TFTP from server 192.168.1.2; our IP address is 192.168.1.194 Filename 'buildroot.cpio.gz.uboot'. Load address: 0xc0c00000 Loading: *############################################ 1.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot > tftp 0xc07f0000 192.168.1.2:tmp/da850evm-Ks80k6/da850-evm.dtb tftp 0xc07f0000 192.168.1.2:tmp/da850evm-Ks80k6/da850-evm.dtb Using DaVinci-EMAC device TFTP from server 192.168.1.2; our IP address is 192.168.1.194 Filename 'tmp/da850evm-Ks80k6/da850-evm.dtb'. Load address: 0xc07f0000 Loading: *# 1.1 MiB/s done Bytes transferred = 6935 (1b17 hex) U-Boot > printenv bootargs printenv bootargs bootargs=console=ttyS2,115200n8 debug earlyprintk U-Boot >bootz 0xc0800000 0xc0c00000 0xc07f0000 bootz 0xc0800000 0xc0c00000 0xc07f0000 Kernel image @ 0xc0800000 [ 0x000000 - 0x2093e0 ] ## Loading init Ramdisk from Legacy Image at c0c00000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 20.97 seconds. # PYBOOT: Result: FAIL