Automated DT boot report for various ARM defconfigs.
Tree/Branch: queue Git describe: v3.13.9 Failed boot tests (console logs at the end) =========================================== omap5-uevm: FAIL: omap2plus_defconfig omap5-uevm: FAIL: multi_lpae_defconfig imx6dl-wandboard,wand-dual: FAIL: imx_v6_v7_defconfig imx6dl-wandboard,wand-solo: FAIL: imx_v6_v7_defconfig imx6q-wandboard: FAIL: imx_v6_v7_defconfig imx6dl-wandboard,wand-solo: FAIL: multi_v7_defconfig omap5-uevm: FAIL: multi_v7_defconfig imx6q-wandboard: OFFLINE: multi_v7_defconfig imx6dl-wandboard,wand-dual: FAIL: multi_v7_defconfig da850-evm: FAIL: davinci_all_defconfig
Full Report ===========
da8xx_omapl_defconfig --------------------- da850-evm 0 min 15.3 sec: PASS (Warnings: 1) legacy,da850evm 0 min 14.4 sec: PASS (Warnings: 1)
omap2plus_defconfig ------------------- legacy,3730xm 0 min 55.2 sec: PASS am335x-boneblack 0 min 25.5 sec: PASS omap3-beagle-xm 0 min 56.8 sec: PASS legacy,3530beagle 0 min 35.0 sec: PASS (Warnings: 1) omap4-panda 1 min 6.6 sec: PASS omap3-tobi 0 min 22.5 sec: PASS (Warnings: 1) am335x-bone 0 min 27.3 sec: PASS omap5-uevm 1 min 17.7 sec: FAIL omap4-panda-es 1 min 6.8 sec: PASS legacy,3730storm 0 min 23.9 sec: PASS legacy,3530overo 0 min 21.3 sec: PASS (Warnings: 1)
multi_lpae_defconfig -------------------- omap5-uevm 1 min 19.0 sec: FAIL sun7i-a20-cubieboard2 0 min 13.8 sec: PASS
tegra_defconfig --------------- tegra30-beaver 0 min 17.0 sec: PASS
imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 42.8 sec: FAIL imx6dl-wandboard,wand-solo 0 min 42.9 sec: FAIL imx6q-wandboard 0 min 40.9 sec: FAIL
sunxi_defconfig --------------- sun7i-a20-cubieboard2 0 min 12.5 sec: PASS sun4i-a10-cubieboard 0 min 12.6 sec: PASS
bcm_defconfig ------------- bcm28155-ap 0 min 23.0 sec: PASS
exynos_defconfig ---------------- exynos5250-arndale 0 min 30.5 sec: PASS
multi_v7_defconfig ------------------ tegra30-beaver 0 min 14.4 sec: PASS am335x-boneblack 0 min 22.5 sec: PASS omap3-beagle-xm 1 min 0.9 sec: PASS sun7i-a20-cubieboard2 0 min 13.6 sec: PASS armada-370-mirabox 0 min 20.6 sec: PASS omap4-panda 1 min 11.7 sec: PASS armada-xp-openblocks-ax3-4 0 min 22.6 sec: PASS sun4i-a10-cubieboard 0 min 21.2 sec: PASS bcm28155-ap 0 min 26.5 sec: PASS imx6dl-wandboard,wand-solo 0 min 42.1 sec: FAIL omap3-tobi 0 min 23.7 sec: PASS (Warnings: 1) am335x-bone 0 min 23.9 sec: PASS omap5-uevm 1 min 18.2 sec: FAIL imx6q-wandboard 0 min 31.4 sec: OFFLINE omap4-panda-es 1 min 1.1 sec: PASS imx6dl-wandboard,wand-dual 0 min 42.2 sec: FAIL
sama5_defconfig --------------- sama5d35ek 0 min 17.3 sec: PASS
davinci_all_defconfig --------------------- legacy,dm365evm 0 min 16.4 sec: PASS da850-evm 0 min 40.7 sec: FAIL
mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 0 min 22.0 sec: PASS armada-370-mirabox 0 min 20.0 sec: PASS
Console logs for failures =========================
omap2plus_defconfig -------------------
omap5-uevm: FAIL: last 80 lines of boot log: --------------------------------------------
(Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... found: 002/102 2 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found U-Boot# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot# dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x88008d80 BOOTP broadcast 2 DHCP client bound to address 192.168.1.200 U-Boot# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U-Boot# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U-Boot# tftp 0x82000000 192.168.1.2:tmp/omap5uevm-TTfWml/zImage tftp 0x82000000 192.168.1.2:tmp/omap5uevm-TTfWml/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.200 Filename 'tmp/omap5uevm-TTfWml/zImage'. Load address: 0x82000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ################################################################# ################################################################# ################################################################# ################################################################# ############################## 417 KiB/s done Bytes transferred = 4242976 (40be20 hex) U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.200 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *T ############################################ 86.9 KiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot# tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-TTfWml/omap5-uevm.dtb tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-TTfWml/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.200 Filename 'tmp/omap5uevm-TTfWml/omap5-uevm.dtb'. Load address: 0x80f80000 Loading: *T ## 2.9 KiB/s done Bytes transferred = 18174 (46fe hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk ip=192.168.1.200:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 U-Boot# bootz 0x82000000 0x81000000 0x80f80000 bootz 0x82000000 0x81000000 0x80f80000 Kernel image @ 0x82000000 [ 0x000000 - 0x40be20 ] ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 80f80000 Booting using the fdt blob at 0x80f80000 Using Device Tree in place at 80f80000, end 80f876fd
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 77.69 seconds. # PYBOOT: Result: FAIL
multi_lpae_defconfig --------------------
omap5-uevm: FAIL: last 80 lines of boot log: --------------------------------------------
(Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... found: 002/102 2 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found U-Boot# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot# dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x88008d80 BOOTP broadcast 2 DHCP client bound to address 192.168.1.200 U-Boot# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U-Boot# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U-Boot# tftp 0x82000000 192.168.1.2:tmp/omap5uevm-J5rkI9/zImage tftp 0x82000000 192.168.1.2:tmp/omap5uevm-J5rkI9/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.200 Filename 'tmp/omap5uevm-J5rkI9/zImage'. Load address: 0x82000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ################################################################# ################################################################# ################################################################# ####################################################### 369.1 KiB/s done Bytes transferred = 3667648 (37f6c0 hex) U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.200 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ############################################ 118.2 KiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot# tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-J5rkI9/omap5-uevm.dtb tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-J5rkI9/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.200 Filename 'tmp/omap5uevm-J5rkI9/omap5-uevm.dtb'. Load address: 0x80f80000 Loading: *T ## 2 KiB/s done Bytes transferred = 18174 (46fe hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk ip=192.168.1.200:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 U-Boot# bootz 0x82000000 0x81000000 0x80f80000 bootz 0x82000000 0x81000000 0x80f80000 Kernel image @ 0x82000000 [ 0x000000 - 0x37f6c0 ] ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 80f80000 Booting using the fdt blob at 0x80f80000 Using Device Tree in place at 80f80000, end 80f876fd
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 78.99 seconds. # PYBOOT: Result: FAIL
imx_v6_v7_defconfig -------------------
imx6dl-wandboard,wand-dual: FAIL: last 80 lines of boot log: ------------------------------------------------------------
version
U-Boot 2013.04-00012-g0b44183 (May 15 2013 - 16:00:22) arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 => setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 => setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' => if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi => if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi => setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound to address 192.168.1.156 => setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 => if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi => tftp 0x18000000 192.168.1.2:tmp/wand-dual-VBFXET/zImage tftp 0x18000000 192.168.1.2:tmp/wand-dual-VBFXET/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'tmp/wand-dual-VBFXET/zImage'. Load address: 0x18000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############# 1.5 MiB/s done Bytes transferred = 4961208 (4bb3b8 hex) => tftp 0x20000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x20000000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x20000000 Loading: *############################################ 1.5 MiB/s done Bytes transferred = 642602 (9ce2a hex) => tftp 0x1f000000 192.168.1.2:tmp/wand-dual-VBFXET/imx6dl-wandboard.dtb tftp 0x1f000000 192.168.1.2:tmp/wand-dual-VBFXET/imx6dl-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'tmp/wand-dual-VBFXET/imx6dl-wandboard.dtb'. Load address: 0x1f000000 Loading: *### 1.4 MiB/s done Bytes transferred = 32741 (7fe5 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.156:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 => bootz 0x18000000 0x20000000 0x1f000000 bootz 0x18000000 0x20000000 0x1f000000 ## Loading init Ramdisk from Legacy Image at 20000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 1f000000 Booting using the fdt blob at 0x1f000000 Using Device Tree in place at 1f000000, end 1f00afe4
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 42.75 seconds. # PYBOOT: Result: FAIL
imx6dl-wandboard,wand-solo: FAIL: last 80 lines of boot log: ------------------------------------------------------------
version
U-Boot 2013.04-00012-g0b44183-dirty (May 15 2013 - 16:16:11) arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 => setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 => setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' => if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi => if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi => setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no =>dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound to address 192.168.1.164 => setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 => if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi => tftp 0x18000000 192.168.1.2:tmp/wand-solo-GTBLxv/zImage tftp 0x18000000 192.168.1.2:tmp/wand-solo-GTBLxv/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'tmp/wand-solo-GTBLxv/zImage'. Load address: 0x18000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############# 1.5 MiB/s done Bytes transferred = 4961208 (4bb3b8 hex) => tftp 0x20000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x20000000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x20000000 Loading: *############################################ 1.5 MiB/s done Bytes transferred = 642602 (9ce2a hex) => tftp 0x1f000000 192.168.1.2:tmp/wand-solo-GTBLxv/imx6dl-wandboard.dtb tftp 0x1f000000 192.168.1.2:tmp/wand-solo-GTBLxv/imx6dl-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'tmp/wand-solo-GTBLxv/imx6dl-wandboard.dtb'. Load address: 0x1f000000 Loading: *### 1.4 MiB/s done Bytes transferred = 32741 (7fe5 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.164:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 => bootz 0x18000000 0x20000000 0x1f000000 bootz 0x18000000 0x20000000 0x1f000000 ## Loading init Ramdisk from Legacy Image at 20000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 1f000000 Booting using the fdt blob at 0x1f000000 Using Device Tree in place at 1f000000, end 1f00afe4
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 42.90 seconds. # PYBOOT: Result: FAIL
imx6q-wandboard: FAIL: last 80 lines of boot log: -------------------------------------------------
U-Boot 2013.07-00001-gc362749 (Sep 06 2013 - 07:50:29) arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 => setenv bootargs console=ttymxc0,115200 setenv bootargs console=ttymxc0,115200 => setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' => if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi => if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi => setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound to address 192.168.1.163 => setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 => if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi => tftp 0x18000000 192.168.1.2:tmp/wand-quad-roRbqK/zImage tftp 0x18000000 192.168.1.2:tmp/wand-quad-roRbqK/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.163 Filename 'tmp/wand-quad-roRbqK/zImage'. Load address: 0x18000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############# 2.7 MiB/s done Bytes transferred = 4961208 (4bb3b8 hex) =>tftp 0x20000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x20000000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.163 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x20000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) => tftp 0x1f000000 192.168.1.2:tmp/wand-quad-roRbqK/imx6q-wandboard.dtb tftp 0x1f000000 192.168.1.2:tmp/wand-quad-roRbqK/imx6q-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.163 Filename 'tmp/wand-quad-roRbqK/imx6q-wandboard.dtb'. Load address: 0x1f000000 Loading: *### 2.5 MiB/s done Bytes transferred = 34380 (864c hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 ip=192.168.1.163:192.168.1.2::255.255.255.0:::none:192.168.1.254 => bootz 0x18000000 0x20000000 0x1f000000 bootz 0x18000000 0x20000000 0x1f000000 Kernel image @ 0x18000000 [ 0x000000 - 0x4bb3b8 ] ## Loading init Ramdisk from Legacy Image at 20000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 1f000000 Booting using the fdt blob at 0x1f000000 Using Device Tree in place at 1f000000, end 1f00b64b
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 40.94 seconds. # PYBOOT: Result: FAIL
multi_v7_defconfig ------------------
imx6dl-wandboard,wand-solo: FAIL: last 80 lines of boot log: ------------------------------------------------------------
=> => version version
U-Boot 2013.04-00012-g0b44183-dirty (May 15 2013 - 16:16:11) arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 => setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 => setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' => if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi => if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi => setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound to address 192.168.1.164 => setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 => if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi => tftp 0x18000000 192.168.1.2:tmp/wand-solo-NC1Ftw/zImage tftp 0x18000000 192.168.1.2:tmp/wand-solo-NC1Ftw/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'tmp/wand-solo-NC1Ftw/zImage'. Load address: 0x18000000 Loading: *################################################################# ################################################################# ################################################################# ###################################################### 1.5 MiB/s done Bytes transferred = 3646496 (37a420 hex) => tftp 0x20000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x20000000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x20000000 Loading: *############################################ 1.5 MiB/s done Bytes transferred = 642602 (9ce2a hex) => tftp 0x1f000000 192.168.1.2:tmp/wand-solo-NC1Ftw/imx6dl-wandboard.dtb tftp 0x1f000000 192.168.1.2:tmp/wand-solo-NC1Ftw/imx6dl-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'tmp/wand-solo-NC1Ftw/imx6dl-wandboard.dtb'. Load address: 0x1f000000 Loading: *### 1.4 MiB/s done Bytes transferred = 32741 (7fe5 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.164:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 => bootz 0x18000000 0x20000000 0x1f000000 bootz 0x18000000 0x20000000 0x1f000000 ## Loading init Ramdisk from Legacy Image at 20000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 1f000000 Booting using the fdt blob at 0x1f000000 Using Device Tree in place at 1f000000, end 1f00afe4
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 42.11 seconds. # PYBOOT: Result: FAIL
omap5-uevm: FAIL: last 80 lines of boot log: --------------------------------------------
if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... found: 002/102 2 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found U-Boot# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot# dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x8008d80 BOOTP broadcast 2 DHCP client bound to address 192.168.1.200 U-Boot#setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U-Boot# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U-Boot# tftp 0x82000000 192.168.1.2:tmp/omap5uevm-hymILI/zImage tftp 0x82000000 192.168.1.2:tmp/omap5uevm-hymILI/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.200 Filename 'tmp/omap5uevm-hymILI/zImage'. Load address: 0x82000000 Loading: *EHCI timed out on TD - token=0x88008d80 T ################################################################# ################################################################# ################################################################# ###################################################### 368.2 KiB/s done Bytes transferred = 3646496 (37a420 hex) U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.200 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *T ############################################ 93.8 KiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot# tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-hymILI/omap5-uevm.dtb tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-hymILI/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.200 Filename 'tmp/omap5uevm-hymILI/omap5-uevm.dtb'. Load address: 0x80f80000 Loading: *T ## 2 KiB/s done Bytes transferred = 18174 (46fe hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk ip=192.168.1.200:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 U-Boot# bootz 0x82000000 0x81000000 0x80f80000 bootz 0x82000000 0x81000000 0x80f80000 Kernel image @ 0x82000000 [ 0x000000 - 0x37a420 ] ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 80f80000 Booting using the fdt blob at 0x80f80000 Using Device Tree in place at 80f80000, end 80f876fd
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 78.17 seconds. # PYBOOT: Result: FAIL
imx6q-wandboard: OFFLINE: last 80 lines of boot log: ----------------------------------------------------
Connected to wand-quad console [channel connected] (~$quit to exit) (user:khilman) is already connected
~$hardreset
Command(wand-quad console)> hardreset (user:khilman) Reboot wand-quad Reboot: wand-quad ; phidget 2 3 : off, sleep, on
U-Boot 2013.07-00001-gc362749 (Sep 06 2013 - 07:50:29)
CPU: Freescale i.MX6Q rev1.2 at 792 MHz Reset cause: POR Board: Wandboard DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 *** Warning - bad CRC, using default environment
In: serial 0 => ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.38 seconds. # PYBOOT: Result: OFFLINE
imx6dl-wandboard,wand-dual: FAIL: last 80 lines of boot log: ------------------------------------------------------------
=> => version version
U-Boot 2013.04-00012-g0b44183 (May 15 2013 - 16:00:22) arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 => setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 => setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' => if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi => if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi => setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound to address 192.168.1.156 => setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 => if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi => tftp 0x18000000 192.168.1.2:tmp/wand-dual-hydvF4/zImage tftp 0x18000000 192.168.1.2:tmp/wand-dual-hydvF4/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'tmp/wand-dual-hydvF4/zImage'. Load address: 0x18000000 Loading: *################################################################# ################################################################# ################################################################# ###################################################### 1.5 MiB/s done Bytes transferred = 3646496 (37a420 hex) => tftp 0x20000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x20000000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x20000000 Loading: *############################################ 1.5 MiB/s done Bytes transferred = 642602 (9ce2a hex) => tftp 0x1f000000 192.168.1.2:tmp/wand-dual-hydvF4/imx6dl-wandboard.dtb tftp 0x1f000000 192.168.1.2:tmp/wand-dual-hydvF4/imx6dl-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'tmp/wand-dual-hydvF4/imx6dl-wandboard.dtb'. Load address: 0x1f000000 Loading: *### 1.4 MiB/s done Bytes transferred = 32741 (7fe5 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.156:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 => bootz 0x18000000 0x20000000 0x1f000000 bootz 0x18000000 0x20000000 0x1f000000 ## Loading init Ramdisk from Legacy Image at 20000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 1f000000 Booting using the fdt blob at 0x1f000000 Using Device Tree in place at 1f000000, end 1f00afe4
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 42.20 seconds. # PYBOOT: Result: FAIL
davinci_all_defconfig ---------------------
da850-evm: FAIL: last 80 lines of boot log: -------------------------------------------
Starting SPI Memory Copy... Valid magicnum, 0x55424CBB, found at offset 0x00010000. DONE Jumping to entry point at 0xC1080000. MMC: davinci: 0 SF: Detected M25P64 with page size 256 Bytes, erase size 64 KiB, total 8 MiB *** Warning - bad CRC, using default environment
In: serial Out: serial Err: serial SF: Detected M25P64 with page size 256 Bytes, erase size 64 KiB, total 8 MiB Net: DaVinci-EMAC Hit any key to stop autoboot: 3 0 U-Boot > U-Boot > version version
U-Boot 2014.01-dirty (Feb 27 2014 - 15:12:48) arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.3-1ubuntu1) 4.7.3 GNU ld (GNU Binutils for Ubuntu) 2.23.52.20130913 U-Boot >setenv bootargs console=ttyS2,115200n8 debug earlyprintk setenv bootargs console=ttyS2,115200n8 debug earlyprintk U-Boot > if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi U-Boot > if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U-Boot > setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot > dhcp dhcp BOOTP broadcast 1 DHCP client bound to address 192.168.1.194 U-Boot >setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U-Boot > if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U-Boot > tftp 0xc0800000 192.168.1.2:tmp/da850evm-6EZMHd/zImage-dtb-RdQpFW tftp 0xc0800000 192.168.1.2:tmp/da850evm-6EZMHd/zImage-dtb-RdQpFW Using DaVinci-EMAC device TFTP from server 192.168.1.2; our IP address is 192.168.1.194 Filename 'tmp/da850evm-6EZMHd/zImage-dtb-RdQpFW'. Load address: 0xc0800000 Loading: *################################################################# ################################################################# ############## 1.7 MiB/s done Bytes transferred = 2108905 (202de9 hex) U-Boot > tftp 0xc0c00000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0xc0c00000 192.168.1.2:buildroot.cpio.gz.uboot Using DaVinci-EMAC device TFTP from server 192.168.1.2; our IP address is 192.168.1.194 Filename 'buildroot.cpio.gz.uboot'. Load address: 0xc0c00000 Loading: *############################################ 1.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot > printenv bootargs printenv bootargs bootargs=console=ttyS2,115200n8 debug earlyprintk U-Boot > bootz 0xc0800000 0xc0c00000 bootz 0xc0800000 0xc0c00000 Kernel image @ 0xc0800000 [ 0x000000 - 0x2013e0 ] ## Loading init Ramdisk from Legacy Image at c0c00000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 40.73 seconds. # PYBOOT: Result: FAIL