mainline boot: 51 passed 24 failed (mainline/v4.6-rc3-182-gb9f5dba)

Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.6-rc3-182-gb9f5dba/

Failed boards:

arndale arm-multi_v7_nosmp_defconfig : FAILED 2:39.62 bbb arm-omap2plus_defconfig : FAILED 1:54.15 bbb arm-multi_v7_defconfig : FAILED 2:03.54 bbb arm-multi_v7_nosmp_defconfig : FAILED 1:53.43 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:48.44 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:44.18 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:51.44 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 1:56.69 beaver arm-tegra_defconfig : FAILED 1:45.11 beaver arm-multi_v7_defconfig : FAILED 1:55.81 beaver arm-multi_v7_nosmp_defconfig : FAILED 1:54.67 colombus arm-multi_v7_nosmp_defconfig : FAILED 3:19.76 cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.77 cosmic arm-multi_v7_defconfig : FAILED 2:16.48 cosmic arm-multi_v7_nosmp_defconfig : FAILED 2:05.55 dalmore arm-tegra_defconfig : FAILED 1:48.81 dalmore arm-multi_v7_defconfig : FAILED 2:07.22 dalmore arm-multi_v7_nosmp_defconfig : FAILED 1:58.19 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:52.78 snow arm-multi_v7_nosmp_defconfig : FAILED 3:13.85 snowball arm-u8500_defconfig : FAILED 1:58.31 snowball arm-multi_v7_defconfig : FAILED 2:04.78 snowball arm-multi_v7_nosmp_defconfig : FAILED 2:07.00 wandboard arm-imx_v6_v7_defconfig : FAILED 2:59.02

Successful boards:

apc arm-vt8500_v6_v7_defconfig : passed 1:18.31 arndale arm-exynos_defconfig : passed 1:28.86 arndale arm-multi_v7_defconfig : passed 1:26.39 arndale arm-multi_lpae_defconfig : passed 1:19.13 capri arm-bcm_defconfig : passed 0:52.88 capri arm-multi_v7_defconfig : passed 0:52.86 capri arm-multi_v7_nosmp_defconfig : warnings 1:00.04 chitra powerpc-pasemi_defconfig : passed 2:03.02 chitra powerpc-ppc64_defconfig : passed 3:03.61 colombus arm-sunxi_defconfig : passed 2:34.29 colombus arm-multi_v7_defconfig : passed 2:46.74 colombus arm-multi_lpae_defconfig : passed 2:36.31 cubie arm-sunxi_defconfig : passed 0:57.75 cubie arm-multi_v7_defconfig : passed 1:02.16 cubie arm-multi_v7_nosmp_defconfig : passed 1:02.61 cubie2 arm-sunxi_defconfig : passed 0:48.55 cubie2 arm-multi_v7_defconfig : passed 1:00.47 cubie2 arm-multi_lpae_defconfig : passed 1:05.99 cubie2 arm-multi_v7_nosmp_defconfig : warnings 1:00.92 cubox arm-multi_v7_defconfig : passed 1:20.14 cubox arm-mvebu_v7_defconfig : passed 1:07.52 cubox arm-multi_v7_nosmp_defconfig : passed 1:21.44 hummingboard arm-imx_v6_v7_defconfig : passed 1:34.80 hummingboard arm-multi_v7_defconfig : passed 1:24.45 hummingboard arm-multi_v7_nosmp_defconfig : warnings 1:14.52 jetsontk1 arm-tegra_defconfig : passed 1:35.97 jetsontk1 arm-multi_v7_defconfig : passed 1:36.59 jetsontk1 arm-multi_lpae_defconfig : passed 1:49.48 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:34.85 pandaes arm-omap2plus_defconfig : warnings 1:45.49 pandaes arm-multi_v7_defconfig : passed 1:54.03 pandaes arm-multi_v7_nosmp_defconfig : warnings 1:41.65 pi arm-exynos_defconfig : passed 2:12.83 pi arm-multi_v7_defconfig : passed 3:44.44 pi arm-multi_lpae_defconfig : passed 2:10.15 pi arm-multi_v7_nosmp_defconfig : warnings 2:08.70 pit arm-exynos_defconfig : passed 2:13.68 pit arm-multi_v7_defconfig : passed 2:15.61 pit arm-multi_lpae_defconfig : passed 2:19.60 pit arm-multi_v7_nosmp_defconfig : warnings 2:08.75 seattle arm64-defconfig : warnings 2:19.56 snow arm-exynos_defconfig : passed 2:10.50 snow arm-multi_v7_defconfig : passed 2:05.75 snow arm-multi_lpae_defconfig : passed 1:58.95 socfpga arm-socfpga_defconfig : passed 1:15.18 socfpga arm-multi_v7_defconfig : passed 1:12.23 socfpga arm-multi_v7_nosmp_defconfig : warnings 1:29.36 trimslice arm-tegra_defconfig : passed 2:42.95 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:36.11 wandboard arm-multi_v7_defconfig : passed 1:11.39 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:20.49

Offline boards:

colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:16.59 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:16.73 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 1:26.32 dalmore arm-multi_lpae_defconfig : OFFLINE 1:05.43 omap5uevm arm-omap2plus_defconfig : OFFLINE 1:18.08 omap5uevm arm-multi_v7_defconfig : OFFLINE 1:19.33 omap5uevm arm-multi_lpae_defconfig : OFFLINE 1:37.35 omap5uevm arm-multi_v7_nosmp_defconfig : OFFLINE 1:19.18 parallella arm-multi_v7_defconfig : OFFLINE 2:34.60 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:16.17 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:48.24 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:45.74 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:56.30 sama5 arm-sama5_defconfig : OFFLINE 2:20.58 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:29.28 seaboard arm-tegra_defconfig : OFFLINE 2:22.01 seaboard arm-multi_v7_defconfig : OFFLINE 2:28.18 seaboard arm-multi_v7_nosmp_defconfig : OFFLINE 2:14.55 trimslice arm-multi_v7_defconfig : OFFLINE 2:23.87

Board legend is available at http://arm-soc.lixom.net/boards.html

Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.6.0-rc3-00182-gb9f5dba (build@brutus) (gcc version 4.9.2 (GCC) ) #1 Sat Apr 16 21:06:35 PDT 2016 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c53c7d [ 2.068471] [c1038dc0] *pgd=4100041e(bad) [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 2.085657] Modules linked in: [ 0.000000] Machine model: Insignal Arndale evaluation board based on EXYNOS5250 [ 0.000000] cma: Reserved 64 MiB at 0xbc000000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Samsung CPU ID: 0x43520010 [ 0.000000] On node 0 totalpages: 520192 [ 0.000000] free_area_init_node: node 0, pgdat c10fd420, node_mem_map eeff7000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 192512 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327680 pages, LIFO batch:31 [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at /home/build/work/batch/arch/arm/kernel/devtree.c:149 arm_dt_init_cpu_maps+0xd4/0x130 [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.6.0-rc3-00182-gb9f5dba #1 [ 0.000000] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 0.000000] [<c030e900>] (unwind_backtrace) from [<c030b474>] (show_stack+0x10/0x14) [ 0.000000] [<c030b474>] (show_stack) from [<c0335db0>] (__warn+0xe4/0xfc) [ 0.000000] [<c0335db0>] (__warn) from [<c0335e00>] (warn_slowpath_fmt+0x38/0x48) [ 0.000000] [<c0335e00>] (warn_slowpath_fmt) from [<c0f040e8>] (arm_dt_init_cpu_maps+0xd4/0x130) [ 0.000000] [<c0f040e8>] (arm_dt_init_cpu_maps) from [<c0f03424>] (setup_arch+0x7b8/0x8ec) [ 0.000000] [<c0f03424>] (setup_arch) from [<c0f00944>] (start_kernel+0x68/0x370) [ 0.000000] [<c0f00944>] (start_kernel) from [<40208078>] (0x40208078) [ 0.000000] ---[ end trace cb88537fdc8fa200 ]--- [ 0.000000] CPU: All CPU(s) started in HYP mode. [ 0.000000] CPU: Virtualization extensions available.

[PYBOOT] [arndale 02:37]: Timed out waiting for "<type 'str'>":

[PYBOOT] [arndale 02:38]: got exception: timeout ~$off

[PYBOOT] [arndale 02:39]: Done. Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.630375] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.640604] ledtrig-cpu: registered to indicate activity on CPUs [ 1.647680] usbcore: registered new interface driver usbhid [ 1.653602] usbhid: USB HID core driver [ 1.665549] NET: Registered protocol family 10 [ 1.672137] sit: IPv6 over IPv4 tunneling driver [ 1.678261] NET: Registered protocol family 17 [ 1.683037] can: controller area network core (rev 20120528 abi 9) [ 1.689686] NET: Registered protocol family 29 [ 1.694403] can: raw protocol (rev 20120528) [ 1.698921] can: broadcast manager protocol (rev 20120528 t) [ 1.704911] can: netlink gateway (rev 20130117) max_hops=1 [ 1.711667] Key type dns_resolver registered [ 1.716558] omap_voltage_late_init: Voltage driver support not added [ 1.724845] ThumbEE CPU extension supported. [ 1.729483] Registering SWP/SWPB emulation handler [ 1.772071] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.778602] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.786369] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.795098] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.803015] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.810835] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.818639] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.825972] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.834654] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 550000 KHz [ 1.842580] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz [ 1.852319] mmc1: new high speed MMC card at address 0001 [ 1.859520] hctosys: unable to open rtc device (rtc0) [ 1.872549] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.878566] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.885552] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.894403] mmcblk1: p1 p2 [ 1.900107] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [bbb 02:00]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 02:01]: got exception: timeout ~$off

[PYBOOT] [bbb 02:02]: Done. Board bbb-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.321040] sdhci: Secure Digital Host Controller Interface driver [ 1.327570] sdhci: Copyright(c) Pierre Ossman [ 1.333374] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.396190] Synopsys Designware Multimedia Card Interface Driver [ 1.403591] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.412844] ledtrig-cpu: registered to indicate activity on CPUs [ 1.419585] usbcore: registered new interface driver usbhid [ 1.425471] usbhid: USB HID core driver [ 1.435100] NET: Registered protocol family 10 [ 1.441578] sit: IPv6 over IPv4 tunneling driver [ 1.447458] NET: Registered protocol family 17 [ 1.452202] can: controller area network core (rev 20120528 abi 9) [ 1.458803] NET: Registered protocol family 29 [ 1.463499] can: raw protocol (rev 20120528) [ 1.468014] can: broadcast manager protocol (rev 20120528 t) [ 1.473995] can: netlink gateway (rev 20130117) max_hops=1 [ 1.480562] Key type dns_resolver registered [ 1.485369] omap_voltage_late_init: Voltage driver support not added [ 1.493171] ThumbEE CPU extension supported. [ 1.505753] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.513332] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.521417] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.529177] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.536873] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.544556] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.551843] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.559521] hctosys: unable to open rtc device (rtc0) [ 1.570337] Waiting for root device /dev/mmcblk0p2... [ 1.605465] mmc1: new high speed MMC card at address 0001 [ 1.611931] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.617004] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.623499] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.631937] mmcblk1: p1 p2

[PYBOOT] [bbb 01:50]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:51]: got exception: timeout ~$off

[PYBOOT] [bbb 01:52]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.053671] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.059787] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.066112] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.072986] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.082580] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.092077] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.099092] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.142447] ledtrig-cpu: registered to indicate activity on CPUs [ 2.151150] oprofile: using arm/armv7 [ 2.156310] Initializing XFRM netlink socket [ 2.161391] NET: Registered protocol family 10 [ 2.172271] sit: IPv6 over IPv4 tunneling driver [ 2.181063] NET: Registered protocol family 17 [ 2.186004] NET: Registered protocol family 15 [ 2.191258] Key type dns_resolver registered [ 2.196116] omap_voltage_late_init: Voltage driver support not added [ 2.202845] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.211308] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.221575] ThumbEE CPU extension supported. [ 2.226228] Registering SWP/SWPB emulation handler [ 2.231266] SmartReflex Class3 initialized [ 2.301040] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.308396] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.319004] mmc1: new high speed MMC card at address 0001 [ 2.331190] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.339543] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.347362] hctosys: unable to open rtc device (rtc0) [ 2.352821] sr_init: No PMIC hook to init smartreflex [ 2.358480] sr_init: platform driver register failed for SR [ 2.398994] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.406989] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.421314] mmcblk1: p1 p2 [ 2.438785] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:52]: got exception: timeout ~$off

[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.587957] sit: IPv6 over IPv4 tunneling driver [ 1.593249] NET: Registered protocol family 17 [ 1.597908] can: controller area network core (rev 20120528 abi 9) [ 1.604418] NET: Registered protocol family 29 [ 1.609078] can: raw protocol (rev 20120528) [ 1.613556] can: broadcast manager protocol (rev 20120528 t) [ 1.619493] can: netlink gateway (rev 20130117) max_hops=1 [ 1.625530] Key type dns_resolver registered [ 1.630072] omap_voltage_late_init: Voltage driver support not added [ 1.637297] Power Management for TI OMAP4+ devices. [ 1.642593] ThumbEE CPU extension supported. [ 1.647081] Registering SWP/SWPB emulation handler [ 1.653893] palmas 0-0058: Irq flag is 0x00000008 [ 1.677321] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 1.708378] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.723100] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.730163] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.755618] rtc-ds1307 2-006f: SET TIME! [ 1.761391] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.768058] rtc-ds1307 2-006f: 'wakeup-source' is set, request for an IRQ is disabled! [ 1.776358] rtc-ds1307 2-006f: 64 bytes nvram [ 1.780957] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.790014] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.826168] vdd_3v3: supplied by regen1 [ 1.863565] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.881087] aic_dvdd_fixed: disabling [ 1.885805] ldousb: disabling [ 1.889880] Waiting for root device /dev/mmcblk0p1... [ 1.907208] mmc1: new high speed MMC card at address 0001 [ 1.913167] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.918046] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.924380] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.931262] mmcblk1: p1

[PYBOOT] [beagleboard-x15 01:48]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:49]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:50]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.582906] sit: IPv6 over IPv4 tunneling driver [ 1.588205] NET: Registered protocol family 17 [ 1.592871] can: controller area network core (rev 20120528 abi 9) [ 1.599399] NET: Registered protocol family 29 [ 1.604061] can: raw protocol (rev 20120528) [ 1.608536] can: broadcast manager protocol (rev 20120528 t) [ 1.614464] can: netlink gateway (rev 20130117) max_hops=1 [ 1.620497] Key type dns_resolver registered [ 1.625056] omap_voltage_late_init: Voltage driver support not added [ 1.632267] Power Management for TI OMAP4+ devices. [ 1.637575] ThumbEE CPU extension supported. [ 1.642067] Registering SWP/SWPB emulation handler [ 1.648899] palmas 0-0058: Irq flag is 0x00000008 [ 1.672203] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 1.703185] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.717888] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.724957] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.750453] rtc-ds1307 2-006f: SET TIME! [ 1.756189] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.762851] rtc-ds1307 2-006f: 'wakeup-source' is set, request for an IRQ is disabled! [ 1.771150] rtc-ds1307 2-006f: 64 bytes nvram [ 1.775749] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.784811] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.821046] vdd_3v3: supplied by regen1 [ 1.859905] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.877425] aic_dvdd_fixed: disabling [ 1.882002] ldousb: disabling [ 1.886109] Waiting for root device /dev/mmcblk0p1... [ 1.902110] mmc1: new high speed MMC card at address 0001 [ 1.908081] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.912973] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.919316] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.926180] mmcblk1: p1

[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:43]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.458767] sit: IPv6 over IPv4 tunneling driver [ 1.463952] NET: Registered protocol family 17 [ 1.468618] can: controller area network core (rev 20120528 abi 9) [ 1.475118] NET: Registered protocol family 29 [ 1.479778] can: raw protocol (rev 20120528) [ 1.484252] can: broadcast manager protocol (rev 20120528 t) [ 1.490187] can: netlink gateway (rev 20130117) max_hops=1 [ 1.496161] Key type dns_resolver registered [ 1.500706] omap_voltage_late_init: Voltage driver support not added [ 1.507667] Power Management for TI OMAP4+ devices. [ 1.512929] ThumbEE CPU extension supported. [ 1.517512] ata1: SATA link down (SStatus 0 SControl 300) [ 1.524468] palmas 0-0058: Irq flag is 0x00000008 [ 1.549641] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 1.577382] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.590912] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.597953] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.623201] rtc-ds1307 2-006f: SET TIME! [ 1.628818] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.635487] rtc-ds1307 2-006f: 'wakeup-source' is set, request for an IRQ is disabled! [ 1.643796] rtc-ds1307 2-006f: 64 bytes nvram [ 1.648384] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.656159] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.688404] vdd_3v3: supplied by regen1 [ 1.719892] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.732767] aic_dvdd_fixed: disabling [ 1.737740] ldousb: disabling [ 1.743538] Waiting for root device /dev/mmcblk0p1... [ 1.789757] mmc1: new high speed MMC card at address 0001 [ 1.795624] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.800475] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.806760] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.813540] mmcblk1: p1

[PYBOOT] [beagleboard-x15 01:53]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:54]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:56]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.165484] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.172355] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.182752] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.187600] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.193907] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.200754] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.210351] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.219861] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.226925] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.273499] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.279800] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.286678] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.296272] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.305774] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.312817] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.318939] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.325256] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.332104] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.341694] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.351192] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.358237] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.364916] vdd_3v3: supplied by regen1 [ 2.403729] hctosys: unable to open rtc device (rtc0) [ 2.409023] sr_init: No PMIC hook to init smartreflex [ 2.414527] sr_init: platform driver register failed for SR [ 2.455284] mmc1: new high speed MMC card at address 0001 [ 2.461130] aic_dvdd_fixed: disabling [ 2.463313] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.464052] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.464679] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.474124] mmcblk1: p1 [ 2.485187] ldousb: disabling [ 2.491130] Waiting for root device /dev/mmcblk0p1...

[PYBOOT] [beagleboard-x15 01:45]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:46]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:48]: Done. Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 3.164032] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.171110] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.181109] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.190546] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.196042] vdd_1v8_gen: supplied by vdd_5v_in [ 3.203221] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.209834] [drm] No driver support for vblank timestamp query. [ 3.215772] drm drm: No connectors reported connected with modes [ 3.221777] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.248630] Console: switching to colour frame buffer device 128x48 [ 3.260551] drm drm: fb0: frame buffer device [ 3.278780] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.287367] usb3_vbus: supplied by vdd_5v_in [ 3.293783] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.300241] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.305652] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.313508] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.328791] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.336022] hub 1-0:1.0: USB hub found [ 3.339792] hub 1-0:1.0: 1 port detected [ 3.344665] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.350076] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.357818] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.373781] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.380935] hub 2-0:1.0: USB hub found [ 3.384702] hub 2-0:1.0: 1 port detected [ 3.393518] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.407120] vdd_sata,avdd_plle: disabling [ 3.411941] usb1_vbus: disabling [ 3.416069] Waiting for root device /dev/mmcblk0p1... [ 3.693787] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.637784] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [ 70.648784] random: nonblocking pool is initialized

[PYBOOT] [beaver 01:52]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:53]: got exception: timeout ~$off

[PYBOOT] [beaver 01:54]: Done. Board beaver-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 3.122749] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.128331] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.134945] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.144938] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.154099] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.159574] vdd_1v8_gen: supplied by vdd_5v_in [ 3.165224] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.171834] [drm] No driver support for vblank timestamp query. [ 3.177761] drm drm: No connectors reported connected with modes [ 3.183762] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.203087] Console: switching to colour frame buffer device 128x48 [ 3.214848] drm drm: fb0: frame buffer device [ 3.219284] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.227183] usb3_vbus: supplied by vdd_5v_in [ 3.233428] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.239876] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.245281] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.253000] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.267829] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.274196] hub 1-0:1.0: USB hub found [ 3.277959] hub 1-0:1.0: 1 port detected [ 3.282604] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.288011] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.295669] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.307826] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.314098] hub 2-0:1.0: USB hub found [ 3.317855] hub 2-0:1.0: 1 port detected [ 3.325367] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.338466] vdd_sata,avdd_plle: disabling [ 3.342854] usb1_vbus: disabling [ 3.346786] Waiting for root device /dev/mmcblk0p1... [ 3.627831] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.566374] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 01:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:52]: got exception: timeout ~$off

[PYBOOT] [beaver 01:54]: Done. Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------

[ 3.424030] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.434035] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.442912] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.448430] vdd_1v8_gen: supplied by vdd_5v_in [ 3.457336] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.463953] [drm] No driver support for vblank timestamp query. [ 3.469950] drm drm: No connectors reported connected with modes [ 3.475963] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.501788] Console: switching to colour frame buffer device 128x48 [ 3.513603] drm drm: fb0: frame buffer device [ 3.540501] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.548025] usb3_vbus: supplied by vdd_5v_in [ 3.554140] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.560606] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.566028] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.574006] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.590509] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.598236] hub 1-0:1.0: USB hub found [ 3.602020] hub 1-0:1.0: 1 port detected [ 3.606831] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.612257] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.620128] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.640505] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.648094] hub 2-0:1.0: USB hub found [ 3.651868] hub 2-0:1.0: 1 port detected [ 3.660223] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.678996] vdd_sata,avdd_plle: disabling [ 3.683528] usb1_vbus: disabling [ 3.686955] ALSA device list: [ 3.689912] #0: NVIDIA Tegra Beaver [ 3.694157] Waiting for root device /dev/mmcblk0p1... [ 3.970508] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.955923] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 01:42]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:43]: got exception: timeout ~$off

[PYBOOT] [beaver 01:44]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 41.649374] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 41.663707] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 85.107509] random: dd urandom read with 56 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/

[ 89.523395] eth0: device MAC address ca:d3:4c:67:43:06 [ 89.680127] RX IPC Checksum Offload disabled [ 89.684757] No MAC Management Counters available [ 89.690540] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/ca:d3:4c:67:43:06 Sending on LPF/eth0/ca:d3:4c:67:43:06 Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8

[PYBOOT] [colombus 03:17]: Timed out waiting for "<type 'str'>": DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5

[PYBOOT] [colombus 03:18]: got exception: timeout ~$off

[PYBOOT] [colombus 03:19]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

[ 14.472504] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.546742] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.557075] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.631320] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.641640] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.715883] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.726231] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.800703] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.811027] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.885271] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.895600] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.969797] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.980131] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.054388] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.064711] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.138905] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.149227] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.223483] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.233805] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.307987] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.318307] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.392546] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.402870] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.477106] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.487432] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.561679] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.572004] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.646243] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.656566] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.730858] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.741181] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.815416] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.825743] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:01]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 14.077035] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.151022] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.161096] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.235078] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.245156] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.319139] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.329217] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.403197] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.413276] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.487267] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.497346] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.571335] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.581400] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.655387] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.665460] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.739442] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.749511] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.823489] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.833578] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.907565] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.917640] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.991623] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.001700] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.075690] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.085761] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.159743] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.169820] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.243800] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.253881] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.327866] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.337949] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.411927] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.422008] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 02:13]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 02:14]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:15]: Done. Board cosmic-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 13.877812] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 17.951730] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 17.961784] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.035706] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.045767] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.119686] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.129741] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.203655] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.213713] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.287630] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.297689] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.371609] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.381678] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.455610] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.465677] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.539595] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.549643] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.623557] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.633617] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.707532] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.717581] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.791493] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.801547] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 62.875466] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 62.885518] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 66.959429] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 66.969484] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.043401] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.053458] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.127378] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.137440] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.211352] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.221414] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 02:02]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 02:03]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:05]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.485327] Key type dns_resolver registered [ 2.491696] ThumbEE CPU extension supported. [ 2.496114] Registering SWP/SWPB emulation handler [ 2.545297] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.551412] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.560347] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.574785] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.581627] [drm] No driver support for vblank timestamp query. [ 2.594141] mmc1: new high speed MMC card at address 0001 [ 2.603095] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.611575] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.618706] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.628582] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.639599] mmcblk1: p1 [ 2.762219] Console: switching to colour frame buffer device 240x75 [ 2.848685] drm drm: fb0: frame buffer device [ 2.864943] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.875020] usb2_vbus: supplied by vdd-sys-5v0 [ 2.885663] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.891255] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.900221] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.914931] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.925407] hub 1-0:1.0: USB hub found [ 2.929429] hub 1-0:1.0: 1 port detected [ 2.940769] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.956052] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.017921] dvdd_ts: disabling [ 3.021134] usb1_vbus: disabling [ 3.024392] vdd_cam_1v8_reg: disabling [ 3.032237] Waiting for root device /dev/mmcblk0p1... [ 3.240055] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.194226] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 61.514995] random: nonblocking pool is initialized

[PYBOOT] [dalmore 02:03]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 02:04]: got exception: timeout ~$off

[PYBOOT] [dalmore 02:06]: Done. Board dalmore-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 2.037105] can: broadcast manager protocol (rev 20120528 t) [ 2.042858] can: netlink gateway (rev 20130117) max_hops=1 [ 2.049537] Key type dns_resolver registered [ 2.054648] ThumbEE CPU extension supported. [ 2.086603] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.091521] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.101599] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.123666] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.130352] [drm] No driver support for vblank timestamp query. [ 2.293667] Console: switching to colour frame buffer device 240x75 [ 2.381180] drm drm: fb0: frame buffer device [ 2.385915] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.394078] usb2_vbus: supplied by vdd-sys-5v0 [ 2.400243] mmc1: new high speed MMC card at address 0001 [ 2.409498] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.415124] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.423211] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.428238] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.434956] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.441038] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.447437] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.454194] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.461309] mmcblk1: p1 [ 2.466262] hub 1-0:1.0: USB hub found [ 2.474659] hub 1-0:1.0: 1 port detected [ 2.482913] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.494300] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.534883] dvdd_ts: disabling [ 2.538037] usb1_vbus: disabling [ 2.541318] vdd_cam_1v8_reg: disabling [ 2.546810] Waiting for root device /dev/mmcblk0p1... [ 2.785229] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.738307] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f

[PYBOOT] [dalmore 01:55]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:56]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:57]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------

[ 2.669175] Bluetooth: RFCOMM ver 1.11 [ 2.673117] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.678511] Bluetooth: BNEP socket layer initialized [ 2.683594] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.689593] Bluetooth: HIDP socket layer initialized [ 2.696545] Key type dns_resolver registered [ 2.706126] Registering SWP/SWPB emulation handler [ 2.738604] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.745887] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.756092] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.779875] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.786680] [drm] No driver support for vblank timestamp query. [ 2.963567] Console: switching to colour frame buffer device 240x75 [ 3.050194] drm drm: fb0: frame buffer device [ 3.081687] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.088905] usb2_vbus: supplied by vdd-sys-5v0 [ 3.098251] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.104053] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.113170] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.132014] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.145532] hub 1-0:1.0: USB hub found [ 3.149596] hub 1-0:1.0: 1 port detected [ 3.163938] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.178454] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.266001] dvdd_ts: disabling [ 3.269106] usb1_vbus: disabling [ 3.272484] vdd_cam_1v8_reg: disabling [ 3.277151] ALSA device list: [ 3.280142] #0: NVIDIA Tegra Dalmore [ 3.286005] Waiting for root device /dev/mmcblk0p1... [ 3.471681] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.506393] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 63.061656] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:46]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:47]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:48]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------

[ 1.650422] dwmmc_exynos 12550000.mmc: DW MMC controller at irq 107,32 bit host data width,128 deep fifo [ 1.657980] usb 1-3: new high-speed USB device number 2 using exynos-ehci [ 1.666889] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.698022] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.699276] usbcore: registered new interface driver usbhid [ 1.704442] usbhid: USB HID core driver [ 1.713205] NET: Registered protocol family 10 [ 1.713827] sit: IPv6 over IPv4 tunneling driver [ 1.717061] NET: Registered protocol family 17 [ 1.721076] NET: Registered protocol family 15 [ 1.725527] Key type dns_resolver registered [ 1.729857] Registering SWP/SWPB emulation handler [ 1.735708] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.740267] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.768540] max98090 1-0010: MAX98090 REVID=0x43 [ 1.770802] max98090 1-0010: use default 2.8v micbias [ 1.777923] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.780923] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.786132] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.795625] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.805338] mmc1: new DDR MMC card at address 0001 [ 1.810354] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.814436] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.820087] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.829337] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.835239] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.838021] VDD10_HDMI_1.0V: disabling [ 1.838690] vdd_g3d: disabling [ 1.839333] BUCK8_2.8V: disabling [ 1.840o47] ALSA device list: [ 1.840751] #0: Odroid-U3 [ 1.857688] mmcblk1: p1 p2 [ 1.861987] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [odroidu3 01:50]: Timed out waiting for "<type 'str'>":

[PYBOOT] [odroidu3 01:51]: got exception: timeout ~$off

[PYBOOT] [odroidu3 01:52]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[....] Waiting for /dev to be fully populated...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 3.192758] EXT4-fs (mmcblk0p3): warning: mounting fs with errors, running e2fsck is recommended [ 3.201110] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 4.251671] random: dd urandom read with 56 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/

Cannot find device "eth0" Bind socket to interface: No such device Failed to bring up eth0. [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[ ok 8[?25h[?0c. [....] Starting web server: apache2apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName [?25l[?1c7[ ok 8[?25h[?0c. [....] Starting periodic command scheduler: cron[?25l[?1c7[ ok 8[?25h[?0c. [....] Starting system message bus: dbus[?25l[?1c7[ ok 8[?25h[?0c. [....] Loading cpufreq kernel modules...[?25l[?1c7[ ok 8[?25h[?0cdone (none). [....] CPUFreq Utilities: Setting ondemand CPUFreq governor...CPU0...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Starting OpenBSD Secure Shell server: sshd[?25l[?1c7[ ok 8[?25h[?0c.

[PYBOOT] [snow 03:11]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snow 03:12]: got exception: timeout ~$off

[PYBOOT] [snow 03:13]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.991210] can: controller area network core (rev 20120528 abi 9) [ 1.997436] NET: Registered protocol family 29 [ 2.001922] can: raw protocol (rev 20120528) [ 2.006195] can: broadcast manager protocol (rev 20120528 t) [ 2.011871] can: netlink gateway (rev 20130117) max_hops=1 [ 2.017913] Key type dns_resolver registered [ 2.022369] ThumbEE CPU extension supported. [ 2.026672] Registering SWP/SWPB emulation handler [ 2.028778] mmc3: new high speed MMC card at address 0001 [ 2.029296] mmcblk3: mmc3:0001 3.53 GiB [ 2.029479] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.029663] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.029846] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.032501] mmcblk3: p1 p2 p3 p4 [ 2.062744] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.069549] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.078704] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.085723] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.092712] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.099700] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.113006] db8500-esram12: disabling [ 2.116973] db8500-esram34: disabling [ 2.120910] V-CSI/DSI: disabling [ 2.124206] mmci-reg: disabling [ 2.127868] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.133850] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.140197] Waiting for root device /dev/mmcblk0p4... Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.

Disconnected.

[PYBOOT] [snowball 02:01]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 02:02]: got exception: timeout ~$off

[PYBOOT] [snowball 02:04]: Done. Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.903015] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.910552] ledtrig-cpu: registered to indicate activity on CPUs [ 1.916778] usbcore: registered new interface driver usbhid [ 1.922363] usbhid: USB HID core driver [ 1.929595] NET: Registered protocol family 10 [ 1.984924] sit: IPv6 over IPv4 tunneling driver [ 1.990081] NET: Registered protocol family 17 [ 1.994567] can: controller area network core (rev 20120528 abi 9) [ 2.000793] NET: Registered protocol family 29 [ 2.005249] can: raw protocol (rev 20120528) [ 2.009521] can: broadcast manager protocol (rev 20120528 t) [ 2.015197] can: netlink gateway (rev 20130117) max_hops=1 [ 2.021148] Key type dns_resolver registered [ 2.025604] ThumbEE CPU extension supported. [ 2.079956] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.094635] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.103759] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.110748] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.117706] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.124694] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.136474] db8500-esram12: disabling [ 2.184265] db8500-esram34: disabling [ 2.204986] V-CSI/DSI: disabling [ 2.214233] mmci-reg: disabling [ 2.217834] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.223785] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.243957] Waiting for root device /dev/mmcblk0p4... [ 3.047821] mmc3: new high speed MMC card at address 0001 [ 3.059631] mmcblk3: mmc3:0001 3.53 GiB [ 3.069793] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 3.079284] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 3.093811] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 3.100616] mmcblk3: p1 p2 p3 p4

[PYBOOT] [snowball 02:04]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 02:05]: got exception: timeout ~$off

[PYBOOT] [snowball 02:06]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------

[ 2.589324] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.600067] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.609985] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.620727] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.644927] NET: Registered protocol family 10 [ 2.650329] sit: IPv6 over IPv4 tunneling driver [ 2.655914] NET: Registered protocol family 17 [ 2.660400] NET: Registered protocol family 35 [ 2.665008] NET: Registered protocol family 37 [ 2.669616] Registering SWP/SWPB emulation handler [ 2.675964] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.682281] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.688842] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.700988] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-03-29 01:14:04 UTC (954292444) [ 2.710327] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.717498] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.724578] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.731567] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.745300] db8500-esram12: disabling [ 2.749053] db8500-esram34: disabling [ 2.753051] V-CSI/DSI: disabling [ 2.756317] mmci-reg: disabling [ 2.759643] ALSA device list: [ 2.762603] #0: MOP500-card [ 2.765960] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.771942] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.778137] Waiting for root device /dev/mmcblk0p4... cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.

Disconnected.

[PYBOOT] [snowball 01:53]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 01:54]: got exception: timeout ~$off

[PYBOOT] [snowball 01:55]: Done. Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

INIT: Id "3" respawnin[ 20.002796] mmcblk0: error -110 sending status command, aborting g too fast: disabled for 5 minutes [ 20.014221] mmcblk0: error -110 sending status command, retrying [ 20.022688] mmcblk0: error -110 sending status command, retrying [ 20.031136] mmcblk0: error -110 sending status command, aborting INIT: INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" INIT: INIT: cannot execute "/sbin/getty" INIT: I[ 20.049856] mmcblk0: error -110 sending status command, retrying d "6" respawning too fast: disabl[ 20.058612] mmcblk0: error -110 sending status command, retrying ed for 5 minutes INIT: Id "4" [ 20.067471] mmcblk0: error -110 sending status command, aborting respawning too fast: disabled for 5 minutescannot execute "/sbin/[ 20.078972] mmcblk0: error -110 sending status command, retrying getty"cannot execute "/sbin/getty[ 20.088019] mmcblk0: error -110 sending status command, retrying "

[ 20.096872] mmcblk0: error -110 sending status command, aborting [ 20.107905] mmcblk0: error -110 sending status command, retrying [ 20.116350] mmcblk0: error -110 sending status command, retrying [ 20.124778] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin[ 20.141568] mmcblk0: error -110 sending status command, retrying /getty" INIT: Id "5" respawnin[ 20.150401] mmcblk0: error -110 sending status command, retrying g too fast: disabled for 5 minute[ 20.159281] mmcblk0: error -110 sending status command, aborting s INIT: Id "1" respawning too fast: disabled for 5 minutes INIT: cannot execute "/sbin/getty" INIT: Id "2" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 52.425477] random: nonblocking pool is initialized

[PYBOOT] [wandboard 02:56]: Timed out waiting for "<type 'str'>":

[PYBOOT] [wandboard 02:57]: got exception: timeout ~$off

[PYBOOT] [wandboard 02:58]: Done.