arndale : passed 0:46.19 bbb : FAILED 1:12.41 beaver : passed 0:32.76 multi-beaver : FAILED 0:47.59 cubie : FAILED 0:13.63 cubie2 : FAILED 0:56.06 cubox : passed 0:55.20 panda : passed 0:52.05 multi-panda : FAILED 0:46.88 sama5 : passed 1:44.92 snowball : OFFLINE 0:30.63 multi-snowball : FAILED 0:43.55 multi-trimslice : FAILED 0:42.75
Board legend:
Board : System SoC Defconfig
arndale : InSignal ArndaleBoard Samsung Exynos 5250 exynos_defconfig bbb : BeagleBone Black TI Sitara AM3359 omap2plus_defconfig beaver : Nvidia Beaver Nvidia Tegra 30 tegra_defconfig multi-beaver : multi_v7_defconfig cubie : Cubieboard Allwinner A10 multi_v7_defconfig cubie2 : Cubieboard 2 Allwinner A20 multi_v7_defconfig cubox : SolidRun Cubox Marvell 88AP510 dove_defconfig multi-trimslice : CompuLab TrimSlice Nvidia Tegra 20 multi_v7_defconfig panda : TI PandaBoard ES TI OMAP4460 omap2plus_defconfig multi-panda : multi_v7_defconfig sama5 : Atmel SAMA5 devboard Atmel SAMA5D35 sama5_defconfig snowball : CALAO Snowball ST-Ericsson A9500 u8500_defconfig multi-snowball : multi_v7_defconfig
Last entries of failed logs below:
========================================================================
Board bbb failure log: -------------------------------------------------
Environment size: 4203/131068 bytes U-Boot# setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp' setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp' U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp U-Boot# tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.10.12-32-gf6645f8/uImage.omap tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.10.12-32-gf6645f8/uImage.omap link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.4; our IP address is 172.16.1.121 Filename '/srv/tftp/queue/v3.10.12-32-gf6645f8/uImage.omap'. Load address: 0x80000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ##### 625 KiB/s done Bytes transferred = 4017296 (3d4c90 hex) U-Boot# tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.12-32-gf6645f8/am335x-boneblack.dtb tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.12-32-gf6645f8/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.4; our IP address is 172.16.1.121 Filename '/srv/tftp/queue/v3.10.12-32-gf6645f8/am335x-boneblack.dtb'. Load address: 0x81000000 Loading: * TFTP error: 'File not found' (1) Not retrying... U-Boot# ~$off
========================================================================
Board cubie failure log: -------------------------------------------------
io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver ipmi message handler version 39.2 IPMI System Interface driver. ipmi_si: Adding default-specified kcs state machine ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca2-0000000000000ca2> Trying to free nonexistent resource <0000000000000ca3-0000000000000ca3> ipmi_si: Adding default-specified smic state machine ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca9-0000000000000ca9> Trying to free nonexistent resource <0000000000000caa-0000000000000caa> Trying to free nonexistent resource <0000000000000cab-0000000000000cab> ipmi_si: Adding default-specified bt state machine ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <00000000000000e4-00000000000000e4> Trying to free nonexistent resource <00000000000000e5-00000000000000e5> Trying to free nonexistent resource <00000000000000e6-00000000000000e6> ipmi_si: Unable to find any System Interface(s) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 17) is a U6_16550A console [ttyS0] enabled usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 Registering SWP/SWPB emulation handler ../../drivers/rtc/hctosys.c: unable to open rtc device (rtc0) List of all partitions: No filesystem could mount root, tried: Kernel panic - not syncing: VFS: Unabl~$off
========================================================================
Board cubie2 failure log: -------------------------------------------------
netmask=255.255.255.0 panicarg=panic=10 partition=0:1 scriptaddr=0x44000000 serverip=172.16.1.4 setargs=if test -z \"$root\"; then if test \"$bootpath\" = "boot/"; then root="/dev/mmcblk0p1 rootwait"; else root="/dev/mmcblk0p2 rootwait"; fi; fi; setenv bootargs console=${console} root=${root} loglevel=${loglevel} ${panicarg} ${extraargs} stderr=serial stdin=serial stdout=serial
Environment size: 2099/131068 bytes sun7i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i#tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.10.12-32-gf6645f8/uImage.multi-1g tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.10.12-32-gf6645f8/uImage.multi-1g Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.167 Filename '/srv/tftp/queue/v3.10.12-32-gf6645f8/uImage.multi-1g'. Load address: 0x41000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 1.7 MiB/s done Bytes transferred = 1820800 (1bc880 hex) sun7i#tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.10.12-32-gf6645f8/sun7i-a20-cubieboard2.dtb tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.10.12-32-gf6645f8/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.167 Filename '/srv/tftp/queue/v3.10.12-32-gf6645f8/sun7i-a20-cubieboard2.dtb'. Load address: 0x42000000 Loading: * TFTP error: 'File not found' (1) Not retrying... sun7i#node: cubie2 status: on ~$off
========================================================================
Board multi-beaver failure log: -------------------------------------------------
TFTP from server 172.16.1.4; our IP address is 172.16.1.108 Filename '/srv/tftp/queue/v3.10.12-32-gf6645f8/uImage.multi-2g'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 1.9 MiB/s done Bytes transferred = 1820800 (1bc880 hex) Tegra30 (Beaver) # tftpboot 0x83000000 172.16.1.4:/srv/tftp/queue/v3.10.12-32-gf6645f8/tegra30-beaver.dtb tftpboot 0x83000000 172.16.1.4:/srv/tftp/queue/v3.10.12-32-gf6645f8/tegra30-beaver.dtb Using asx0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.108 Filename '/srv/tftp/queue/v3.10.12-32-gf6645f8/tegra30-beaver.dtb'. Load address: 0x83000000 Loading: *#### 1.4 MiB/s done Bytes transferred = 16546 (40a2 hex) Tegra30 (Beaver) # bootm 0x82000000 - 0x83000000 bootm 0x82000000 - 0x83000000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1820736 Bytes = 1.7 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Kernel Image ... OK Loading Device Tree to 8fff8000, end 8ffff0a1 ... OK
Starting kernel ...
node: beaver status: on ~$off
========================================================================
Board multi-panda failure log: -------------------------------------------------
TFTP from server 172.16.1.4; our IP address is 172.16.1.182 Filename '/srv/tftp/queue/v3.10.12-32-gf6645f8/uImage.multi-2g'. Load address: 0x80000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### done Bytes transferred = 1820800 (1bc880 hex) Panda # tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.12-32-gf6645f8/omap4-panda-es.dtb tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.12-32-gf6645f8/omap4-panda-es.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.182 Filename '/srv/tftp/queue/v3.10.12-32-gf6645f8/omap4-panda-es.dtb'. Load address: 0x81000000 Loading: *#### done Bytes transferred = 17271 (4377 hex) Panda # bootm 0x80000000 - 0x81000000 bootm 0x80000000 - 0x81000000 ## Booting kernel from Legacy Image at 80000000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1820736 Bytes = 1.7 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 81000000 Booting using the fdt blob at 0x81000000 Loading Kernel Image ... OK OK reserving fdt memory region: addr=9d000000 size=3000000 Using Device Tree in place at 81000000, end 81007376
Starting kernel ...
~$off
========================================================================
Board multi-snowball failure log: -------------------------------------------------
ipaddr=172.16.1.135 serverip=172.16.1.7 bootfile=queue/v3.10.12-32-gf6645f8/uImage.multi-snowball autoboot=no
Environment size: 1706/4092 bytes U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.10.12-32-gf6645f8/uImage.multi-snowball tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.10.12-32-gf6645f8/uImage.multi-snowball smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.135 Filename '/srv/tftp/queue/v3.10.12-32-gf6645f8/uImage.multi-snowball'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### done Bytes transferred = 1820800 (1bc880 hex) U8500 $ bootm 0x100000 bootm 0x100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1820736 Bytes = 1.7 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK
Starting kernel ...
~$off
========================================================================
Board multi-trimslice failure log: -------------------------------------------------
*** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.148 TrimSlice # setenv bootfile queue/v3.10.12-32-gf6645f8/uImage.multi-trimslice setenv bootfile queue/v3.10.12-32-gf6645f8/uImage.multi-trimslice TrimSlice # setenv autoboot no setenv autoboot no TrimSlice # printenv printenv bootdelay=5 baudrate=115200 loadaddr=0x408000 stdin=serial,usbkbd stdout=serial,lcd stderr=serial,lcd console=ttyS0,115200n8 ethact=RTL8169#0 gateway=172.16.1.1 bootcmd=none bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw autoload=no netmask=255.255.255.0 ipaddr=172.16.1.148 serverip=172.16.1.7 bootfile=queue/v3.10.12-32-gf6645f8/uImage.multi-trimslice autoboot=no
Environment size: 376/65532 bytes TrimSlice # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw TrimSlice # tftpboot 0x800000 172.16.1.4:/srv/tftp/queue/v3.10.12-32-gf6645f8/uImage.multi-trimslice tftpboot 0x800000 172.16.1.4:/srv/tftp/queue/v3.10.12-32-gf6645f8/uImage.multi-trimslice Using RTL8169#0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.148 Filename '/srv/tftp/queue/v3.10.12-32-gf6645f8/uImage.multi-trimslice'. Load address: 0x800000 Loading: * TFTP error: 'File not found' (1) Not retrying... TrimSlice # ~$off