Tree/Branch: next Git describe: next-20140515 Failed boot tests (console logs at the end) =========================================== tegra30-beaver: FAIL: arm-tegra_defconfig sun7i-a20-cubieboard2: OFFLINE: arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y sun7i-a20-cubieboard2: FAIL: arm-multi_v7_defconfig sun4i-a10-cubieboard: FAIL: arm-multi_v7_defconfig sun7i-a20-cubieboard2: FAIL: arm-sunxi_defconfig sun4i-a10-cubieboard: FAIL: arm-sunxi_defconfig bcm28155-ap: FAIL: arm-bcm_defconfig
Full Report ===========
arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.4 sec: PASS da850-evm 0 min 15.6 sec: PASS
arm-tegra_defconfig ------------------- tegra30-beaver 0 min 41.9 sec: FAIL
arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- armada-xp-openblocks-ax3-4 0 min 26.4 sec: PASS omap5-uevm 1 min 39.5 sec: PASS sun7i-a20-cubieboard2 0 min 31.4 sec: OFFLINE
arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 18.8 sec: PASS imx6dl-wandboard,wand-solo 0 min 19.0 sec: PASS imx6q-wandboard 0 min 17.4 sec: PASS
arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 52.6 sec: PASS am335x-boneblack 0 min 25.6 sec: PASS omap3-beagle-xm 1 min 0.8 sec: PASS legacy,3530beagle 0 min 39.7 sec: PASS (Warnings: 1) omap4-panda 1 min 2.3 sec: PASS omap3-overo-tobi 0 min 23.4 sec: PASS (Warnings: 1) am335x-bone 0 min 27.4 sec: PASS omap3-overo-storm-tobi 0 min 23.1 sec: PASS omap5-uevm 1 min 5.4 sec: PASS omap3-n900 0 min 17.6 sec: PASS (Warnings: 1) legacy,n900 0 min 17.2 sec: PASS (Warnings: 1) omap4-panda-es 1 min 11.4 sec: PASS legacy,3730storm 0 min 23.2 sec: PASS legacy,3530overo 0 min 20.9 sec: PASS (Warnings: 1)
arm-multi_v7_defconfig ---------------------- qcom-apq8074-dragonboard 0 min 17.8 sec: PASS ste-snowball 1 min 22.4 sec: PASS tegra30-beaver 0 min 21.0 sec: PASS am335x-boneblack 0 min 24.1 sec: PASS omap3-beagle-xm 0 min 50.7 sec: PASS sun7i-a20-cubieboard2 0 min 40.0 sec: FAIL armada-370-mirabox 0 min 22.4 sec: PASS omap4-panda 0 min 57.2 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.4 sec: PASS sun4i-a10-cubieboard 0 min 44.6 sec: FAIL bcm28155-ap 0 min 27.9 sec: PASS omap3-overo-tobi 0 min 22.0 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.3 sec: PASS am335x-bone 0 min 26.8 sec: PASS omap3-overo-storm-tobi 0 min 21.1 sec: PASS omap5-uevm 1 min 35.6 sec: PASS omap3-n900 0 min 16.2 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 17.0 sec: PASS omap4-panda-es 0 min 58.3 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.4 sec: PASS
arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 39.1 sec: FAIL sun4i-a10-cubieboard 0 min 43.5 sec: FAIL
arm-bcm_defconfig ----------------- bcm28155-ap 0 min 44.8 sec: FAIL
arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 32.8 sec: PASS exynos5250-arndale 0 min 29.9 sec: PASS
arm-u8500_defconfig ------------------- ste-snowball 0 min 31.3 sec: PASS
arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.7 sec: PASS armada-370-mirabox 0 min 21.3 sec: PASS
arm-sama5_defconfig ------------------- sama5d35ek 0 min 17.3 sec: PASS
Console logs for failures =========================
arm-tegra_defconfig -------------------
tegra30-beaver: FAIL: last 40 lines of boot log: ------------------------------------------------
Filename 'buildroot.cpio.gz.uboot'. Load address: 0x82000000 Loading: *############################################ 2.2 MiB/s done Bytes transferred = 642602 (9ce2a hex) Tegra30 (Beaver) # tftp 0x83000000 192.168.1.2:tmp/beaver-bjDo2A/tegra30-beaver.dtb tftp 0x83000000 192.168.1.2:tmp/beaver-bjDo2A/tegra30-beaver.dtb Using asx0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.224 Filename 'tmp/beaver-bjDo2A/tegra30-beaver.dtb'. Load address: 0x83000000 Loading: *## 1.9 MiB/s done Bytes transferred = 24197 (5e85 hex) Tegra30 (Beaver) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 debug earlyprintk Tegra30 (Beaver) # bootz 0x81000000 0x82000000 0x83000000 bootz 0x81000000 0x82000000 0x83000000 Kernel image @ 0x81000000 [ 0x000000 - 0x430db8 ] ## Loading init Ramdisk from Legacy Image at 82000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83008e84
Starting kernel ...
Uncompressing Linux... done, booting the kernel. ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 41.85 seconds. # PYBOOT: Result: FAIL
arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ----------------------------------------
sun7i-a20-cubieboard2: OFFLINE: last 40 lines of boot log: ----------------------------------------------------------
Connected to cubie2 console [channel connected] (~$quit to exit) (user:khilman) is already connected
~$hardreset
Command(cubie2 console)> hardreset (user:khilman) Reboot cubie2 Reboot: cubie2 ; phidget 3 0 : off, sleep, on 0 sun7i# ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.42 seconds. # PYBOOT: Result: OFFLINE
arm-multi_v7_defconfig ----------------------
sun7i-a20-cubieboard2: FAIL: last 40 lines of boot log: -------------------------------------------------------
Filename 'buildroot.cpio.gz.uboot'. Load address: 0x43000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x42000000 192.168.1.2:tmp/cubie2-weZLri/sun7i-a20-cubieboard2.dtb tftp 0x42000000 192.168.1.2:tmp/cubie2-weZLri/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.186 Filename 'tmp/cubie2-weZLri/sun7i-a20-cubieboard2.dtb'. Load address: 0x42000000 Loading: *## 2.5 MiB/s done Bytes transferred = 18501 (4845 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.186:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 sun7i# bootz 0x41000000 0x43000000 0x42000000 bootz 0x41000000 0x43000000 0x42000000 Kernel image @ 0x41000000 [ 0x000000 - 0x47abc0 ] ## Loading init Ramdisk from Legacy Image at 43000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 42000000 Booting using the fdt blob at 0x42000000 Using Device Tree in place at 42000000, end 42007844
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 40.01 seconds. # PYBOOT: Result: FAIL
sun4i-a10-cubieboard: FAIL: last 40 lines of boot log: ------------------------------------------------------
Filename 'buildroot.cpio.gz.uboot'. Load address: 0x43000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i# tftp 0x42000000 192.168.1.2:tmp/cubie-JT5LEU/sun4i-a10-cubieboard.dtb tftp 0x42000000 192.168.1.2:tmp/cubie-JT5LEU/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-JT5LEU/sun4i-a10-cubieboard.dtb'. Load address: 0x42000000 Loading: *## 2.1 MiB/s done Bytes transferred = 15184 (3b50 hex) sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.193:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 sun4i# bootz 0x41008000 0x43000000 0x42000000 bootz 0x41008000 0x43000000 0x42000000 Kernel image @ 0x41008000 [ 0x000000 - 0x47abc0 ] ## Loading init Ramdisk from Legacy Image at 43000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 42000000 Booting using the fdt blob at 0x42000000 Loading Device Tree to 40ff9000, end 40fffb4f ... OK
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 44.63 seconds. # PYBOOT: Result: FAIL
arm-sunxi_defconfig -------------------
sun7i-a20-cubieboard2: FAIL: last 40 lines of boot log: -------------------------------------------------------
Filename 'buildroot.cpio.gz.uboot'. Load address: 0x43000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x42000000 192.168.1.2:tmp/cubie2-74251m/sun7i-a20-cubieboard2.dtb tftp 0x42000000 192.168.1.2:tmp/cubie2-74251m/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.186 Filename 'tmp/cubie2-74251m/sun7i-a20-cubieboard2.dtb'. Load address: 0x42000000 Loading: *## 2.5 MiB/s done Bytes transferred = 18501 (4845 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.186:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 sun7i#bootz 0x41000000 0x43000000 0x42000000 bootz 0x41000000 0x43000000 0x42000000 Kernel image @ 0x41000000 [ 0x000000 - 0x1c4c10 ] ## Loading init Ramdisk from Legacy Image at 43000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 42000000 Booting using the fdt blob at 0x42000000 Using Device Tree in place at 42000000, end 42007844
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 39.06 seconds. # PYBOOT: Result: FAIL
sun4i-a10-cubieboard: FAIL: last 40 lines of boot log: ------------------------------------------------------
Filename 'buildroot.cpio.gz.uboot'. Load address: 0x43000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i# tftp 0x42000000 192.168.1.2:tmp/cubie-UJgaq3/sun4i-a10-cubieboard.dtb tftp 0x42000000 192.168.1.2:tmp/cubie-UJgaq3/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-UJgaq3/sun4i-a10-cubieboard.dtb'. Load address: 0x42000000 Loading: *## 2.4 MiB/s done Bytes transferred = 15184 (3b50 hex) sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.193:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 sun4i#bootz 0x41008000 0x43000000 0x42000000 bootz 0x41008000 0x43000000 0x42000000 Kernel image @ 0x41008000 [ 0x000000 - 0x1c4c10 ] ## Loading init Ramdisk from Legacy Image at 43000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 42000000 Booting using the fdt blob at 0x42000000 Loading Device Tree to 40ff9000, end 40fffb4f ... OK
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 43.50 seconds. # PYBOOT: Result: FAIL
arm-bcm_defconfig -----------------
bcm28155-ap: FAIL: last 40 lines of boot log: ---------------------------------------------
finished. total time: 0.417s NE! GET_DESC ->STRING DESC sending 'device-tree' (7 KB)... OKAY [ 0.001s] writing 'device-tree'...
downloading of 7575 bytes finished Flashing Raw Image Writing to partition 'device-tree' Writing 'device-tree' OKAY [ 0.013s] finished. total time: 0.014s DONE! GET_DESC ->STRING unknown partition 'initrd' error: cannot determine image filename for 'initrd' DESC GET_DESC ->STRING DEresuming boot... OKAY [ 0.000s] finished. total time: 0.001s SC ['/home/khilman/bin/fastboot.py', 'capri', 'tmp/capri-sarGJq/zImage', 'tmp/capri-sarGJq/bcm28155-ap.dtb', 'None'] /home/khilman/bin/fastboot.py capri tmp/capri-sarGJq/zImage tmp/capri-sarGJq/bcm28155-ap.dtb None TFTP: download kernel (tmp/capri-sarGJq/zImage) to /tmp/kernel-02ZCL7 TFTP: download dtb (tmp/capri-sarGJq/bcm28155-ap.dtb) to /tmp/dtb-zg13Wa Deleting /tmp/kernel-02ZCL7 Deleting /tmp/dtb-zg13Wa
MMC read: dev # 0, block # 72320, count 16384 ... 16384 blocks read: OK
MMC read: dev # 0, block # 114688, count 32768 ... 32768 blocks read: OK ## Flattened Device Tree blob at 9e000000 Booting using the fdt blob at 0x9e000000 Using Device Tree in place at 9e000000, end 9e004d96
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 44.78 seconds. # PYBOOT: Result: FAIL