Automated DT boot report for various ARM defconfigs.
Tree/Branch: next Git describe: next-20140331 Failed boot tests (console logs at the end) =========================================== ste-snowball: FAIL: multi_v7_defconfig omap4-panda-es: FAIL: multi_v7_defconfig
Full Report ===========
omap2plus_defconfig ------------------- legacy,3730xm 0 min 52.3 sec: PASS am335x-boneblack 0 min 26.0 sec: PASS omap3-beagle-xm 1 min 0.9 sec: PASS legacy,3530beagle 1 min 18.5 sec: PASS (Warnings: 1) omap4-panda 1 min 14.3 sec: PASS omap3-overo-tobi 0 min 23.6 sec: PASS (Warnings: 1) am335x-bone 0 min 27.3 sec: PASS omap3-overo-storm-tobi 0 min 22.4 sec: PASS omap5-uevm 1 min 5.8 sec: PASS (Warnings: 1) omap4-panda-es 1 min 6.6 sec: PASS legacy,3730storm 0 min 19.7 sec: PASS legacy,3530overo 0 min 21.4 sec: PASS (Warnings: 1)
multi_lpae_defconfig -------------------- omap5-uevm 1 min 43.1 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 12.3 sec: PASS
tegra_defconfig --------------- tegra30-beaver 0 min 17.3 sec: PASS
imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 18.6 sec: PASS imx6dl-wandboard,wand-solo 0 min 18.6 sec: PASS imx6q-wandboard 0 min 17.2 sec: PASS
sunxi_defconfig --------------- sun7i-a20-cubieboard2 0 min 22.8 sec: PASS sun4i-a10-cubieboard 0 min 17.8 sec: PASS
bcm_defconfig ------------- bcm28155-ap 0 min 23.4 sec: PASS
mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 0 min 22.2 sec: PASS armada-370-mirabox 0 min 20.3 sec: PASS
exynos_defconfig ---------------- exynos5250-arndale 0 min 30.6 sec: PASS
multi_v7_defconfig ------------------ qcom-apq8074-dragonboard 0 min 16.2 sec: PASS ste-snowball 0 min 53.7 sec: FAIL tegra30-beaver 0 min 19.6 sec: PASS am335x-boneblack 0 min 24.0 sec: PASS omap3-beagle-xm 0 min 49.2 sec: PASS sun7i-a20-cubieboard2 0 min 12.2 sec: PASS armada-370-mirabox 0 min 23.9 sec: PASS omap4-panda 0 min 51.9 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.4 sec: PASS sun4i-a10-cubieboard 0 min 22.6 sec: PASS bcm28155-ap 0 min 28.4 sec: PASS omap3-overo-tobi 0 min 21.9 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.3 sec: PASS am335x-bone 0 min 26.7 sec: PASS omap3-overo-storm-tobi 0 min 20.9 sec: PASS omap5-uevm 1 min 38.1 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 17.0 sec: PASS omap4-panda-es 2 min 20.3 sec: FAIL imx6dl-wandboard,wand-dual 0 min 18.6 sec: PASS
u8500_defconfig --------------- ste-snowball 0 min 31.4 sec: PASS
sama5_defconfig --------------- sama5d35ek 0 min 17.4 sec: PASS
davinci_all_defconfig --------------------- legacy,dm365evm 0 min 17.6 sec: PASS da850-evm 0 min 15.6 sec: PASS
Console logs for failures =========================
multi_v7_defconfig ------------------
ste-snowball: FAIL: last 80 lines of boot log: ----------------------------------------------
CPU: ST-Ericsson db8500 v2 (Dual ARM Cortex A9) 998.400 Mhz I2C: ready DRAM: 1 GB MMC: MCDE: startup failed sec_bridge: ISSWAPI_FLUSH_BOOT_CODE: 2 EMMC: 0, MMC: 1 In: serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 1 0 U8500 $ U8500 $ version version
U-Boot 2009.11 (sept. 19 2011 - 17:03:11) U8500 $ setenv ethaddr 6e:e6:84:36:8e:9e setenv ethaddr 6e:e6:84:36:8e:9e Can't overwrite "ethaddr" U8500 $ setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 U8500 $ setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U8500 $ if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi U8500 $ if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U8500 $ setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U8500 $ dhcp dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.159 U8500 $ setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U8500 $ if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U8500 $ tftp 0x00800000 192.168.1.2:tmp/snowball-jFSjsL/tmpZQn5d3-uImage tftp 0x00800000 192.168.1.2:tmp/snowball-jFSjsL/tmpZQn5d3-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'tmp/snowball-jFSjsL/tmpZQn5d3-uImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################################################### done Bytes transferred = 4676705 (475c61 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $ bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4676641 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 53.66 seconds. # PYBOOT: Result: FAIL
omap4-panda-es: FAIL: last 80 lines of boot log: ------------------------------------------------
[ 1.508575] usbcore: registered new interface driver net1080 [ 1.514587] usbcore: registered new interface driver cdc_subset [ 1.520843] usbcore: registered new interface driver zaurus [ 1.526794] usbcore: registered new interface driver cdc_ncm [ 1.532775] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.539642] ehci-pci: EHCI PCI platform driver [ 1.544342] ehci-platform: EHCI generic platform driver [ 1.550079] ehci-omap: OMAP-EHCI Host Controller driver [ 1.575805] ehci-omap 4a064c00.ehci: EHCI Host Controller [ 1.581512] ehci-omap 4a064c00.ehci: new USB bus registered, assigned bus number 1 [ 1.589813] ehci-omap 4a064c00.ehci: irq 109, io mem 0x4a064c00 [ 1.609283] ehci-omap 4a064c00.ehci: USB 2.0 started, EHCI 1.00 [ 1.616210] hub 1-0:1.0: USB hub found [ 1.620239] hub 1-0:1.0: 3 ports detected [ 1.624938] ehci-orion: EHCI orion driver [ 1.629333] SPEAr-ehci: EHCI SPEAr driver [ 1.633697] tegra-ehci: Tegra EHCI driver [ 1.638580] usbcore: registered new interface driver usb-storage [ 1.646728] mousedev: PS/2 mouse device common for all mice [ 1.654724] i2c /dev entries driver [ 1.659271] usbcore: registered new interface driver uvcvideo [ 1.665313] USB Video Class driver (1.1.1) [ 1.669616] gspca_main: v2.14.0 registered [ 1.676055] sdhci: Secure Digital Host Controller Interface driver [ 1.682556] sdhci: Copyright(c) Pierre Ossman [ 1.687866] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 1.694793] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.702453] omap_hsmmc 480d5000.mmc: unable to get vmmc regulator -517 [ 1.709381] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.717285] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.724182] usbcore: registered new interface driver usbhid [ 1.730041] usbhid: USB HID core driver [ 1.738037] TCP: cubic registered [ 1.741516] NET: Registered protocol family 17 [ 1.746368] Key type dns_resolver registered [ 1.751373] Power Management for TI OMAP4+ devices. [ 1.756530] Power Management for TI OMAP4. [ 1.760864] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.768249] Registering SWP/SWPB emulation handler [ 1.773986] vwl1271: 1800 mV [ 1.781036] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.791107] twl 0-0048: PIH (irq 39) nested IRQs [ 1.797454] twl_rtc rtc.15: Enabling TWL-RTC [ 1.804504] twl_rtc rtc.15: rtc core: registered rtc.15 as rtc0 [ 1.811370] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.817474] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.823577] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.829772] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.835296] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.840759] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.845764] VDAC: 1800 mV [ 1.846252] VANA: 2100 mV [ 1.853088] VCXIO: 1800 mV [ 1.856475] VUSB: 3300 mV [ 1.860015] V1V8: 1800 mV [ 1.863616] V2V1: 2100 mV [ 1.959625] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.109649] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 2.110198] hub 1-1:1.0: USB hub found [ 2.110473] hub 1-1:1.0: 5 ports detected [ 2.125488] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 2.135925] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 2.143432] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.151367] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.211669] gic_timer_retrigger: lost localtimer interrupt [ 2.321441] twl_rtc rtc.15: setting system clock to 2000-03-08 10:28:07 UTC (952511287) [ 2.343261] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.353820] mmc0: new high speed SDHC card at address 1234 [ 2.359954] mmcblk0: mmc0:1234 SA04G 3.63 GiB [ 2.366363] mmcblk0: p1 p2 [ 2.374481] omap_hsmmc 480d5000.mmc: card claims to support voltages below defined range [ 2.392944] mmc1: queuing unknown CIS tuple 0x91 (3 bytes) [ 2.399444] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.407043] mmc1: new SDIO card at address 0001 [ 2.542205] smsc95xx v1.0.4 [ 2.654449] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, ce:a6:87:65:a7:db ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 140.28 seconds. # PYBOOT: Result: FAIL