stable-rc boot: 43 passed 17 failed (stable-rc/v3.18.35)

Full logs are available at http://arm-soc.lixom.net/bootlogs/stable-rc/v3.18.35/

Failed boards:

arndale arm-multi_v7_nosmp_defconfig : BUILD FAILED bbb arm-omap2plus_defconfig : FAILED 1:51.35 bbb arm-multi_v7_defconfig : FAILED 1:56.67 bbb arm-multi_v7_nosmp_defconfig : BUILD FAILED beagleboard-x15 arm-omap2plus_defconfig : NO DTB beagleboard-x15 arm-multi_v7_defconfig : NO DTB beagleboard-x15 arm-multi_lpae_defconfig : NO DTB beagleboard-x15 arm-multi_v7_nosmp_defconfig : BUILD FAILED beaver arm-tegra_defconfig : FAILED 1:43.39 beaver arm-multi_v7_defconfig : FAILED 1:48.66 beaver arm-multi_v7_nosmp_defconfig : BUILD FAILED capri arm-multi_v7_nosmp_defconfig : BUILD FAILED chitra powerpc-pasemi_defconfig : BUILD FAILED colibri-vf61 arm-multi_v7_nosmp_defconfig : BUILD FAILED colombus arm-multi_v7_nosmp_defconfig : BUILD FAILED cosmic arm-multi_v7_nosmp_defconfig : BUILD FAILED cubie arm-multi_v7_nosmp_defconfig : BUILD FAILED cubie2 arm-multi_v7_nosmp_defconfig : BUILD FAILED cubox arm-multi_v7_nosmp_defconfig : BUILD FAILED dalmore arm-tegra_defconfig : FAILED 1:47.90 dalmore arm-multi_v7_defconfig : FAILED 1:53.57 dalmore arm-multi_lpae_defconfig : FAILED 2:11.01 dalmore arm-multi_v7_nosmp_defconfig : BUILD FAILED hummingboard arm-imx_v6_v7_defconfig : FAILED 1:45.38 hummingboard arm-multi_v7_defconfig : FAILED 1:44.75 hummingboard arm-multi_v7_nosmp_defconfig : BUILD FAILED jetsontk1 arm-multi_v7_nosmp_defconfig : BUILD FAILED jetsontx1 arm64-defconfig : NO DTB jetsontx1 arm64-nosmp_defconfig : NO DTB odroidu3 arm-exynos_defconfig : FAILED 0:28.56 odroidu3 arm-multi_v7_defconfig : FAILED 1:12.02 omap5uevm arm-multi_v7_nosmp_defconfig : BUILD FAILED pandaes arm-multi_v7_nosmp_defconfig : BUILD FAILED parallella arm-multi_v7_nosmp_defconfig : BUILD FAILED pi arm-multi_v7_nosmp_defconfig : BUILD FAILED pit arm-multi_v7_nosmp_defconfig : BUILD FAILED rk3288evb arm-multi_v7_nosmp_defconfig : BUILD FAILED seaboard arm-tegra_defconfig : FAILED 2:04.84 seaboard arm-multi_v7_defconfig : FAILED 2:07.34 seaboard arm-multi_v7_nosmp_defconfig : BUILD FAILED seattle arm64-defconfig : FAILED 3:13.17 seattle arm64-nosmp_defconfig : FAILED 3:03.83 snow arm-multi_v7_nosmp_defconfig : BUILD FAILED snowball arm-u8500_defconfig : FAILED 2:02.77 snowball arm-multi_v7_defconfig : FAILED 2:23.61 snowball arm-multi_v7_nosmp_defconfig : BUILD FAILED socfpga arm-multi_v7_nosmp_defconfig : BUILD FAILED trimslice arm-multi_v7_nosmp_defconfig : BUILD FAILED wandboard arm-multi_v7_nosmp_defconfig : BUILD FAILED

Successful boards:

apc arm-vt8500_v6_v7_defconfig : passed 1:24.79 arndale arm-exynos_defconfig : passed 1:28.30 arndale arm-multi_v7_defconfig : passed 1:16.38 arndale arm-multi_lpae_defconfig : passed 2:19.03 capri arm-multi_v7_defconfig : passed 0:44.14 chitra powerpc-ppc64_defconfig : passed 2:33.28 colombus arm-sunxi_defconfig : passed 1:01.01 colombus arm-multi_v7_defconfig : passed 1:33.11 colombus arm-multi_lpae_defconfig : passed 1:06.29 cosmic arm-imx_v6_v7_defconfig : passed 3:10.06 cosmic arm-multi_v7_defconfig : passed 3:10.18 cubie arm-sunxi_defconfig : passed 0:51.10 cubie arm-multi_v7_defconfig : passed 1:04.60 cubie2 arm-sunxi_defconfig : passed 0:55.71 cubie2 arm-multi_v7_defconfig : passed 1:02.30 cubie2 arm-multi_lpae_defconfig : passed 0:53.86 cubox arm-multi_v7_defconfig : passed 1:16.70 cubox arm-mvebu_v7_defconfig : passed 1:25.05 jetsontk1 arm-tegra_defconfig : passed 1:36.55 jetsontk1 arm-multi_v7_defconfig : passed 1:38.70 jetsontk1 arm-multi_lpae_defconfig : passed 1:36.05 minnowmax x86-minnowmax_defconfig : passed 1:50.83 omap5uevm arm-omap2plus_defconfig : passed 1:01.54 omap5uevm arm-multi_v7_defconfig : passed 1:11.02 omap5uevm arm-multi_lpae_defconfig : passed 1:14.47 pandaes arm-omap2plus_defconfig : warnings 1:48.60 pandaes arm-multi_v7_defconfig : passed 1:46.31 parallella arm-multi_v7_defconfig : passed 2:42.10 pi arm-exynos_defconfig : passed 1:30.30 pi arm-multi_v7_defconfig : passed 0:55.72 pi arm-multi_lpae_defconfig : passed 0:52.34 pit arm-exynos_defconfig : passed 1:32.79 pit arm-multi_v7_defconfig : passed 0:59.81 pit arm-multi_lpae_defconfig : passed 0:52.06 snow arm-exynos_defconfig : passed 1:06.39 snow arm-multi_v7_defconfig : passed 1:39.06 snow arm-multi_lpae_defconfig : passed 1:07.06 socfpga arm-socfpga_defconfig : passed 1:21.32 socfpga arm-multi_v7_defconfig : passed 1:42.59 trimslice arm-tegra_defconfig : passed 1:46.48 trimslice arm-multi_v7_defconfig : passed 1:51.15 wandboard arm-imx_v6_v7_defconfig : passed 1:16.89 wandboard arm-multi_v7_defconfig : passed 0:59.16

Offline boards:

colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:16.82 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:24.71 rk3288evb arm-multi_v7_defconfig : OFFLINE 1:06.32 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:41.29 sama5 arm-sama5_defconfig : OFFLINE 2:15.30 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:32.08

Board legend is available at http://arm-soc.lixom.net/boards.html

Last entries of failed logs below:

========================================================================

Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.427361] usbcore: registered new interface driver usbhid [ 1.433251] usbhid: USB HID core driver [ 1.444744] TCP: cubic registered [ 1.448263] NET: Registered protocol family 17 [ 1.453019] can: controller area network core (rev 20120528 abi 9) [ 1.459668] NET: Registered protocol family 29 [ 1.464375] can: raw protocol (rev 20120528) [ 1.468866] can: broadcast manager protocol (rev 20120528 t) [ 1.474877] can: netlink gateway (rev 20130117) max_hops=1 [ 1.481375] Key type dns_resolver registered [ 1.486214] omap_voltage_late_init: Voltage driver support not added [ 1.493679] platform cpufreq-dt.0: Driver cpufreq-dt requests probe deferral [ 1.501477] ThumbEE CPU extension supported. [ 1.506054] Registering SWP/SWPB emulation handler [ 1.515467] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.522086] platform cpufreq-dt.0: Driver cpufreq-dt requests probe deferral [ 1.582209] mmc1: BKOPS_EN bit is not set [ 1.586506] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 1.592947] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 1.600405] libphy: 4a101000.mdio: probed [ 1.604693] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver unknown [ 1.614725] cpsw 4a100000.ethernet: Detected MACID = bc:6a:29:7a:42:a8 [ 1.623481] /work/build/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.638060] ALSA device list: [ 1.641286] No soundcards found. [ 1.646496] platform cpufreq-dt.0: Driver cpufreq-dt requests probe deferral [ 1.654652] Waiting for root device /dev/mmcblk1p2... [ 1.660572] mmc1: new high speed MMC card at address 0001 [ 1.667088] mmcblk0: mmc1:0001 MMC02G 1.78 GiB [ 1.672155] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.678624] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.687094] mmcblk0: p1 p2 [ 1.693571] platform cpufreq-dt.0: Driver cpufreq-dt requests probe deferral

[PYBOOT] [bbb 01:53]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:54]: got exception: timeout ~$off

[PYBOOT] [bbb 01:55]: Done.

========================================================================

Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 1.988253] omap_voltage_late_init: Voltage driver support not added [ 1.994996] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.003518] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.013004] platform cpufreq-dt.0: Driver cpufreq-dt requests probe deferral [ 2.021503] ThumbEE CPU extension supported. [ 2.026050] Registering SWP/SWPB emulation handler [ 2.031163] SmartReflex Class3 initialized [ 2.062341] vdds_dpr: at 1500 mV [ 2.070582] vdd_mpu: 925 <--> 1325 mV at 1100 mV [ 2.078652] vdd_core: 925 <--> 1150 mV at 1100 mV [ 2.090213] vio,vrtc,vdds: at 1800 mV [ 2.096831] vdd_3v3aux: at 3300 mV [ 2.103893] vdd_1v8: 1800 mV [ 2.110539] vdd_3v3a: at 3300 mV [ 2.116545] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.122406] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.130234] mmc1: BKOPS_EN bit is not set [ 2.138576] cpufreq: __cpufreq_add_dev: CPU0: Running at unlisted freq: 550000 KHz [ 2.148750] mmc1: new high speed MMC card at address 0001 [ 2.158432] mmcblk0: mmc1:0001 MMC02G 1.78 GiB [ 2.165149] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.172555] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.186982] cpufreq: __cpufreq_add_dev: CPU0: Unlisted initial frequency changed to: 600000 KHz [ 2.199428] mmcblk0: p1 p2 [ 2.279752] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 2.286165] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 2.295808] libphy: 4a101000.mdio: probed [ 2.300168] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 [ 2.311437] cpsw 4a100000.ethernet: Detected MACID = bc:6a:29:7a:42:a8 [ 2.322298] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 2.331393] sr_init: No PMIC hook to init smartreflex [ 2.336948] sr_init: platform driver register failed for SR [ 2.372675] Waiting for root device /dev/mmcblk1p2...

[PYBOOT] [bbb 01:48]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:49]: got exception: timeout ~$off

[PYBOOT] [bbb 01:50]: Done.

========================================================================

Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 3.739296] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf00d2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 473 [ 3.749291] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.760006] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.766622] [drm] No driver support for vblank timestamp query. [ 3.772548] host1x drm: No connectors reported connected with modes [ 3.778813] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.802406] Console: switching to colour frame buffer device 128x48 [ 3.814190] host1x drm: fb0: frame buffer device [ 3.818891] host1x drm: registered panic notifier [ 3.838637] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.844975] platform 7d004000.usb: Driver tegra-ehci requests probe deferral [ 3.852488] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.862981] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.869439] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.874846] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.882706] tegra-ehci 7d004000.usb: irq 53, io mem 0x7d004000 [ 3.898331] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.905028] hub 1-0:1.0: USB hub found [ 3.908807] hub 1-0:1.0: 1 port detected [ 3.913258] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.918669] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.926777] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.938628] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.944937] hub 2-0:1.0: USB hub found [ 3.948706] hub 2-0:1.0: 1 port detected [ 3.956537] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.970095] vdd_sata,avdd_plle: disabling [ 3.974532] usb1_vbus: disabling [ 3.977927] ALSA device list: [ 3.980903] #0: NVIDIA Tegra Beaver [ 3.985129] Waiting for root device /dev/mmcblk1p1... [ 4.258638] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 5.208961] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 01:46]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:47]: got exception: timeout ~$off

[PYBOOT] [beaver 01:48]: Done.

========================================================================

Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------

[ 3.621822] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf00d2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 473 [ 3.631824] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.643292] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.649953] [drm] No driver support for vblank timestamp query. [ 3.655899] host1x drm: No connectors reported connected with modes [ 3.662155] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.685808] Console: switching to colour frame buffer device 128x48 [ 3.697582] host1x drm: fb0: frame buffer device [ 3.702272] host1x drm: registered panic notifier [ 3.734983] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.740979] platform 7d004000.usb: Driver tegra-ehci requests probe deferral [ 3.748224] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.758285] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.764742] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.770158] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.778084] tegra-ehci 7d004000.usb: irq 53, io mem 0x7d004000 [ 3.794674] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.801661] hub 1-0:1.0: USB hub found [ 3.805455] hub 1-0:1.0: 1 port detected [ 3.810074] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.815514] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.823368] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.844673] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.851574] hub 2-0:1.0: USB hub found [ 3.855363] hub 2-0:1.0: 1 port detected [ 3.863442] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.881902] vdd_sata,avdd_plle: disabling [ 3.886371] usb1_vbus: disabling [ 3.889771] ALSA device list: [ 3.892729] #0: NVIDIA Tegra Beaver [ 3.896890] Waiting for root device /dev/mmcblk1p1... [ 4.174982] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 5.177590] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 01:40]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:41]: got exception: timeout ~$off

[PYBOOT] [beaver 01:43]: Done.

========================================================================

Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 3.104699] usb1_vbus: 5000 mV [ 3.108014] usb1_vbus: supplied by vdd-sys-5v0 [ 3.114781] usb2_vbus: 5000 mV [ 3.118140] usb2_vbus: supplied by vdd-sys-5v0 [ 3.125745] vdd_hdmi_5v0: 5000 mV [ 3.129464] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 3.141706] vdd_cam_1v8_reg: 1800 mV [ 3.147055] VDD_5V0_HDMI_CON: 5000 mV [ 3.151057] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 3.175229] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.181970] [drm] No driver support for vblank timestamp query. [ 3.326080] Console: switching to colour frame buffer device 240x75 [ 3.411542] host1x drm: fb0: frame buffer device [ 3.416349] host1x drm: registered panic notifier [ 3.433819] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.442148] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.454781] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.460348] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.469616] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.483903] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.493649] hub 1-0:1.0: USB hub found [ 3.497641] hub 1-0:1.0: 1 port detected [ 3.507012] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.519887] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.584168] dvdd_ts: disabling [ 3.587266] usb1_vbus: disabling [ 3.590598] vdd_hdmi_5v0: disabling [ 3.594149] vdd_cam_1v8_reg: disabling [ 3.598913] ALSA device list: [ 3.601928] #0: NVIDIA Tegra Dalmore [ 3.608041] Waiting for root device /dev/mmcblk1p1... [ 3.808776] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.785855] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f

[PYBOOT] [dalmore 02:08]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 02:09]: got exception: timeout ~$off

[PYBOOT] [dalmore 02:10]: Done.

========================================================================

Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 3.104888] usb1_vbus: 5000 mV [ 3.108205] usb1_vbus: supplied by vdd-sys-5v0 [ 3.114465] usb2_vbus: 5000 mV [ 3.117768] usb2_vbus: supplied by vdd-sys-5v0 [ 3.125322] vdd_hdmi_5v0: 5000 mV [ 3.129043] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 3.141196] vdd_cam_1v8_reg: 1800 mV [ 3.146470] VDD_5V0_HDMI_CON: 5000 mV [ 3.150473] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 3.172508] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.179273] [drm] No driver support for vblank timestamp query. [ 3.322123] Console: switching to colour frame buffer device 240x75 [ 3.407576] host1x drm: fb0: frame buffer device [ 3.412351] host1x drm: registered panic notifier [ 3.429110] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.437422] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.450052] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.455613] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.464838] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.479061] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.488366] hub 1-0:1.0: USB hub found [ 3.492395] hub 1-0:1.0: 1 port detected [ 3.501954] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.514718] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.575961] dvdd_ts: disabling [ 3.579141] usb1_vbus: disabling [ 3.582402] vdd_hdmi_5v0: disabling [ 3.585957] vdd_cam_1v8_reg: disabling [ 3.590648] ALSA device list: [ 3.593710] #0: NVIDIA Tegra Dalmore [ 3.599813] Waiting for root device /dev/mmcblk1p1... [ 3.804074] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.785644] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f

[PYBOOT] [dalmore 01:50]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:51]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:52]: Done.

========================================================================

Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------

[ 2.984393] usb1_vbus: 5000 mV [ 2.987958] usb1_vbus: supplied by vdd-sys-5v0 [ 2.995041] usb2_vbus: 5000 mV [ 2.998639] usb2_vbus: supplied by vdd-sys-5v0 [ 3.005642] vdd_hdmi_5v0: 5000 mV [ 3.009442] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 3.017419] vdd_cam_1v8_reg: 1800 mV [ 3.023473] VDD_5V0_HDMI_CON: 5000 mV [ 3.027583] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 3.050913] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.057560] [drm] No driver support for vblank timestamp query. [ 3.201761] Console: switching to colour frame buffer device 240x75 [ 3.288272] host1x drm: fb0: frame buffer device [ 3.293186] host1x drm: registered panic notifier [ 3.318774] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.325795] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.335814] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.341478] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.350425] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.368698] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.382008] hub 1-0:1.0: USB hub found [ 3.385984] hub 1-0:1.0: 1 port detected [ 3.399383] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.413940] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.507149] dvdd_ts: disabling [ 3.510352] usb1_vbus: disabling [ 3.513616] vdd_hdmi_5v0: disabling [ 3.517130] vdd_cam_1v8_reg: disabling [ 3.521843] ALSA device list: [ 3.524837] #0: NVIDIA Tegra Dalmore [ 3.530373] Waiting for root device /dev/mmcblk1p1... [ 3.708784] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.742250] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f

[PYBOOT] [dalmore 01:45]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:46]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:47]: Done.

========================================================================

Board hummingboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

[ 1.428671] usbhid: USB HID core driver [ 1.456358] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.463050] [drm] No driver support for vblank timestamp query. [ 1.469773] imx-drm display-subsystem: bound imx-ipuv3-crtc.0 (ops ipu_crtc_ops) [ 1.482843] imx-drm display-subsystem: bound imx-ipuv3-crtc.1 (ops ipu_crtc_ops) [ 1.491077] imx-hdmi 120000.hdmi: Detected HDMI controller 0x13:0x1a:0xa0:0xc1 [ 1.498662] imx-drm display-subsystem: bound 120000.hdmi (ops hdmi_ops) [ 1.505846] imx-drm display-subsystem: No connectors reported connected with modes [ 1.513547] [drm] Cannot find any crtc or sizes - going 1024x768 [ 1.531619] Console: switching to colour frame buffer device 128x48 [ 1.543050] imx-drm display-subsystem: fb0: frame buffer device [ 1.549106] imx-drm display-subsystem: registered panic notifier [ 1.555233] [drm] Initialized imx-drm 1.0.0 20120507 on minor 0 [ 1.565100] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.592025] mmc0: new high speed SDHC card at address b368 [ 1.599445] imx-spdif sound-spdif: snd-soc-dummy-dai <-> 2004000.spdif mapping ok [ 1.607078] mmcblk0: mmc0:b368 00000 7.51 GiB [ 1.615525] mmcblk0: p1 p2 [ 1.625519] TCP: cubic registered [ 1.630386] NET: Registered protocol family 10 [ 1.638783] sit: IPv6 over IPv4 tunneling driver [ 1.645460] NET: Registered protocol family 17 [ 1.649965] can: controller area network core (rev 20120528 abi 9) [ 1.656357] NET: Registered protocol family 29 [ 1.660985] can: raw protocol (rev 20120528) [ 1.665365] can: broadcast manager protocol (rev 20120528 t) [ 1.671105] can: netlink gateway (rev 20130117) max_hops=1 [ 1.677276] Key type dns_resolver registered [ 1.686367] Registering SWP/SWPB emulation handler [ 1.694930] snvs_rtc 20cc034.snvs-rtc-lp: setting system clock to 1970-01-01 00:00:00 UTC (0) [ 1.742808] ALSA device list: [ 1.745800] #0: On-board SPDIF [ 1.750510] Waiting for root device /dev/mmcblk1p2...

[PYBOOT] [hummingboard 01:42]: Timed out waiting for "<type 'str'>":

[PYBOOT] [hummingboard 01:43]: got exception: timeout ~$off

[PYBOOT] [hummingboard 01:44]: Done.

========================================================================

Board hummingboard-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.135058] mousedev: PS/2 mouse device common for all mice [ 1.143660] i2c /dev entries driver [ 1.148579] usbcore: registered new interface driver uvcvideo [ 1.154361] USB Video Class driver (1.1.1) [ 1.158484] gspca_main: v2.14.0 registered [ 1.166181] sdhci: Secure Digital Host Controller Interface driver [ 1.172393] sdhci: Copyright(c) Pierre Ossman [ 1.177735] Synopsys Designware Multimedia Card Interface Driver [ 1.184578] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.190996] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode [ 1.200459] sdhci-esdhc-imx 2194000.usdhc: No vqmmc regulator found [ 1.240415] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 1.248987] ledtrig-cpu: registered to indicate activity on CPUs [ 1.255285] usbcore: registered new interface driver usbhid [ 1.260881] usbhid: USB HID core driver [ 1.273029] TCP: cubic registered [ 1.276427] NET: Registered protocol family 17 [ 1.280931] can: controller area network core (rev 20120528 abi 9) [ 1.287196] NET: Registered protocol family 29 [ 1.291679] can: raw protocol (rev 20120528) [ 1.295979] can: broadcast manager protocol (rev 20120528 t) [ 1.301675] can: netlink gateway (rev 20130117) max_hops=1 [ 1.307574] Key type dns_resolver registered [ 1.312015] ThumbEE CPU extension supported. [ 1.316336] Registering SWP/SWPB emulation handler [ 1.324541] /work/build/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.342545] ALSA device list: [ 1.345571] No soundcards found. [ 1.349661] Waiting for root device /dev/mmcblk1p2... [ 1.397872] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.411915] mmc0: new high speed SDHC card at address b368 [ 1.417791] mmcblk0: mmc0:b368 00000 7.51 GiB [ 1.423700] mmcblk0: p1 p2

[PYBOOT] [hummingboard 01:42]: Timed out waiting for "<type 'str'>":

[PYBOOT] [hummingboard 01:43]: got exception: timeout ~$off

[PYBOOT] [hummingboard 01:44]: Done.

========================================================================

Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------

[ 1.911417] bfa0: 00000002 c052f884 000009e2 c001afe0 ee0ba000 c061c4e4 c0438474 c0547304 [ 1.919568] bfc0: c065a721 c0526d88 00000000 00000000 c0623800 ee0bbfe8 c000f098 c000f09c [ 1.927717] bfe0: 60000153 ffffffff [ 1.931194] [<c0011e80>] (__irq_svc) from [<c000f09c>] (arch_cpu_idle+0x38/0x3c) [ 1.938567] [<c000f09c>] (arch_cpu_idle) from [<c004f1cc>] (cpu_startup_entry+0x114/0x16c) [ 1.946802] [<c004f1cc>] (cpu_startup_entry) from [<40008744>] (0x40008744) [ 1.953740] CPU3: stopping [ 1.956429] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 3.18.35 #1 [ 1.962423] [<c0014254>] (unwind_backtrace) from [<c00113c0>] (show_stack+0x10/0x14) [ 1.970137] [<c00113c0>] (show_stack) from [<c042ec8c>] (dump_stack+0x7c/0x90) [ 1.977331] [<c042ec8c>] (dump_stack) from [<c0013520>] (handle_IPI+0x17c/0x18c) [ 1.984700] [<c0013520>] (handle_IPI) from [<c00086b0>] (gic_handle_irq+0x68/0x6c) [ 1.992248] [<c00086b0>] (gic_handle_irq) from [<c0011e80>] (__irq_svc+0x40/0x74) [ 1.999701] Exception stack(0xee0bdfa0 to 0xee0bdfe8) [ 2.004734] dfa0: 00000003 c052f884 00000db2 c001afe0 ee0bc000 c061c4e4 c0438474 c0547304 [ 2.012886] dfc0: c065a721 c0526d88 00000000 00000000 c0623800 ee0bdfe8 c000f098 c000f09c [ 2.021035] dfe0: 60000153 ffffffff [ 2.024512] [<c0011e80>] (__irq_svc) from [<c000f09c>] (arch_cpu_idle+0x38/0x3c) [ 2.031883] [<c000f09c>] (arch_cpu_idle) from [<c004f1cc>] (cpu_startup_entry+0x114/0x16c) [ 2.040120] [<c004f1cc>] (cpu_startup_entry) from [<40008744>] (0x40008744) [ 2.047059] CPU1: stopping [ 2.049748] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.18.35 #1 [ 2.055742] [<c0014254>] (unwind_backtrace) from [<c00113c0>] (show_stack+0x10/0x14) [ 2.063455] [<c00113c0>] (show_stack) from [<c042ec8c>] (dump_stack+0x7c/0x90) [ 2.070649] [<c042ec8c>] (dump_stack) from [<c0013520>] (handle_IPI+0x17c/0x18c) [ 2.078019] [<c0013520>] (handle_IPI) from [<c00086b0>] (gic_handle_irq+0x68/0x6c) [ 2.085566] [<c00086b0>] (gic_handle_irq) from [<c0011e80>] (__irq_svc+0x40/0x74) [ 2.093019] Exception stack(0xee0b9fa0 to 0xee0b9fe8) [ 2.098053] 9fa0: 00000001 c052f884 000013a2 c001afe0 ee0b8000 c061c4e4 c0438474 c0547304 [ 2.106204] 9fc0: c065a721 c0526d88 00000000 00000000 ee04a028 ee0b9fe8 c000f098 c000f09c [ 2.114354] 9fe0: 60000153 ffffffff [ 2.117830] [<c0011e80>] (__irq_svc) from [<c000f09c>] (arch_cpu_idle+0x38/0x3c) [ 2.125200] [<c000f09c>] (arch_cpu_idle) from [<c004f1cc>] (cpu_startup_entry+0x114/0x16c) [ 2.133439] [<c004f1cc>] (cpu_startup_entry) from [<40008744>] (0x40008744) [ 2.140382] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)

[PYBOOT] [odroidu3 00:26]: got exception: panic ~$off

[PYBOOT] [odroidu3 00:27]: Done.

========================================================================

Board odroidu3-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.424347] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 3.18.35 #1 [ 1.424367] [<c0216144>] (unwind_backtrace) from [<c0211b50>] (show_stack+0x10/0x14) [ 1.424378] [<c0211b50>] (show_stack) from [<c089db0c>] (dump_stack+0x8c/0xa0) [ 1.424388] [<c089db0c>] (dump_stack) from [<c0214968>] (handle_IPI+0x150/0x170) [ 1.424396] [<c0214968>] (handle_IPI) from [<c0208938>] (gic_handle_irq+0x68/0x6c) [ 1.424403] [<c0208938>] (gic_handle_irq) from [<c0212640>] (__irq_svc+0x40/0x54) [ 1.424407] Exception stack(0xed8b9f80 to 0xed8b9fc8) [ 1.424414] 9f80: ffffffed 00000000 ffffffed c021f680 ed8b8000 c0c5a498 c0c5a4fc 00000000 [ 1.424421] 9fa0: 00000000 00000000 00000000 c08aba58 c0c9f0c0 ed8b9fc8 c020f254 c020f258 [ 1.424424] 9fc0: 60000153 ffffffff [ 1.424433] [<c0212640>] (__irq_svc) from [<c020f258>] (arch_cpu_idle+0x38/0x3c) [ 1.424441] [<c020f258>] (arch_cpu_idle) from [<c02766f0>] (cpu_startup_entry+0x218/0x28c) [ 1.424449] [<c02766f0>] (cpu_startup_entry) from [<40208a64>] (0x40208a64) [ 1.430639] CPU0: stopping [ 1.430646] CPU: 0 PID: 53 Comm: kworker/0:1 Not tainted 3.18.35 #1 [ 1.430668] Workqueue: pm genpd_power_off_work_fn [ 1.430686] [<c0216144>] (unwind_backtrace) from [<c0211b50>] (show_stack+0x10/0x14) [ 1.430698] [<c0211b50>] (show_stack) from [<c089db0c>] (dump_stack+0x8c/0xa0) [ 1.430708] [<c089db0c>] (dump_stack) from [<c0214968>] (handle_IPI+0x150/0x170) [ 1.430716] [<c0214968>] (handle_IPI) from [<c0208938>] (gic_handle_irq+0x68/0x6c) [ 1.430723] [<c0208938>] (gic_handle_irq) from [<c0212640>] (__irq_svc+0x40/0x54) [ 1.430727] Exception stack(0xedccbd98 to 0xedccbde0) [ 1.430732] bd80: c0ce8498 0000000a [ 1.430738] bda0: 003f0000 60000153 c0d4bc3c c0d470d8 00000004 00000000 00000000 00000006 [ 1.430744] bdc0: 00000000 000000d4 00000001 edccbde0 c0ce8920 c027eee8 60000153 ffffffff [ 1.430760] [<c0212640>] (__irq_svc) from [<c027eee8>] (console_unlock+0x310/0x4a0) [ 1.430770] [<c027eee8>] (console_unlock) from [<c027f310>] (vprintk_emit+0x298/0x4bc) [ 1.430778] [<c027f310>] (vprintk_emit) from [<c089c718>] (printk+0x34/0x44) [ 1.430790] [<c089c718>] (printk) from [<c057a4d0>] (pm_genpd_poweroff+0x394/0x41c) [ 1.430801] [<c057a4d0>] (pm_genpd_poweroff) from [<c057a574>] (genpd_power_off_work_fn+0x1c/0x28) [ 1.430815] [<c057a574>] (genpd_power_off_work_fn) from [<c025b74c>] (process_one_work+0x1f8/0x3e4) [ 1.430825] [<c025b74c>] (process_one_work) from [<c025c2dc>] (worker_thread+0x5c/0x588) [ 1.430839] [<c025c2dc>] (worker_thread) from [<c0260504>] (kthread+0xd0/0xe8) [ 1.430850] [<c0260504>] (kthread) from [<c020e780>] (ret_from_fork+0x14/0x34) [ 1.868091] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)

[PYBOOT] [odroidu3 01:10]: got exception: panic ~$off

[PYBOOT] [odroidu3 01:11]: Done.

========================================================================

Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.051068] tegra-ehci c5004000.usb: new USB bus registered, assigned bus number 1 [ 2.058870] tegra-ehci c5004000.usb: irq 53, io mem 0xc5004000 [ 2.070499] tegra-ehci c5004000.usb: USB 2.0 started, EHCI 1.00 [ 2.077356] hub 1-0:1.0: USB hub found [ 2.081176] hub 1-0:1.0: 1 port detected [ 2.088817] tegra-ehci c5008000.usb: EHCI Host Controller [ 2.094266] tegra-ehci c5008000.usb: new USB bus registered, assigned bus number 2 [ 2.102070] tegra-ehci c5008000.usb: irq 129, io mem 0xc5008000 [ 2.115500] tegra-ehci c5008000.usb: USB 2.0 started, EHCI 1.00 [ 2.122254] hub 2-0:1.0: USB hub found [ 2.126063] hub 2-0:1.0: 1 port detected [ 2.132737] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.139365] [drm] No driver support for vblank timestamp query. [ 2.220104] Console: switching to colour frame buffer device 170x48 [ 2.243233] host1x drm: fb0: frame buffer device [ 2.247951] host1x drm: registered panic notifier [ 2.265499] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.273749] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 2.280229] tegra-ehci c5000000.usb: EHCI Host Controller [ 2.285660] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 2.293703] tegra-ehci c5000000.usb: irq 52, io mem 0xc5000000 [ 2.305497] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 2.312301] hub 3-0:1.0: USB hub found [ 2.316509] hub 3-0:1.0: 1 port detected [ 2.322221] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.329444] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.345847] vdd_1v5: disabling [ 2.348906] vdd_1v2: disabling [ 2.352156] ALSA device list: [ 2.355123] #0: NVIDIA Tegra Seaboard [ 2.359799] Waiting for root device /dev/mmcblk2p3... [ 2.450516] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 3.493324] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60

[PYBOOT] [seaboard 02:04]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 02:05]: got exception: timeout ~$off

[PYBOOT] [seaboard 02:06]: Done.

========================================================================

Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------

[ 1.960617] tegra-ehci c5004000.usb: new USB bus registered, assigned bus number 1 [ 1.968451] tegra-ehci c5004000.usb: irq 53, io mem 0xc5004000 [ 1.984563] tegra-ehci c5004000.usb: USB 2.0 started, EHCI 1.00 [ 1.992253] hub 1-0:1.0: USB hub found [ 1.996087] hub 1-0:1.0: 1 port detected [ 2.003725] tegra-ehci c5008000.usb: EHCI Host Controller [ 2.009201] tegra-ehci c5008000.usb: new USB bus registered, assigned bus number 2 [ 2.017071] tegra-ehci c5008000.usb: irq 129, io mem 0xc5008000 [ 2.034556] tegra-ehci c5008000.usb: USB 2.0 started, EHCI 1.00 [ 2.042176] hub 2-0:1.0: USB hub found [ 2.045996] hub 2-0:1.0: 1 port detected [ 2.053993] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.060641] [drm] No driver support for vblank timestamp query. [ 2.144214] Console: switching to colour frame buffer device 170x48 [ 2.163089] host1x drm: fb0: frame buffer device [ 2.167797] host1x drm: registered panic notifier [ 2.194567] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.201998] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 2.208468] tegra-ehci c5000000.usb: EHCI Host Controller [ 2.213904] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 2.221855] tegra-ehci c5000000.usb: irq 52, io mem 0xc5000000 [ 2.245068] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 2.253289] hub 3-0:1.0: USB hub found [ 2.257138] hub 3-0:1.0: 1 port detected [ 2.263933] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.271665] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:01 UTC (1230768001) [ 2.304746] vdd_1v5: disabling [ 2.307799] vdd_1v2: disabling [ 2.310990] ALSA device list: [ 2.313952] #0: NVIDIA Tegra Seaboard [ 2.318439] Waiting for root device /dev/mmcblk2p3... [ 2.364576] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 3.425001] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60

[PYBOOT] [seaboard 02:01]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 02:02]: got exception: timeout ~$off

[PYBOOT] [seaboard 02:03]: Done.

========================================================================

Board seattle-arm64-defconfig failure log: -------------------------------------------------

Station IP address is 172.16.20.134

Server IP address is 172.16.20.2 NBP filename is grubaa64.efi NBP filesize is 841728 Bytes

...

Checking Media Presence...... Media Present......

Downloading NBP file...

Succeed to download NBP file.  Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists possible device or file completions.

grub> [PYBOOT] [seattle 01:33]: grub: taking control.

[PYBOOT] [seattle 01:33]: before linux load linux stable-rc/v3.18.35/arm64-defconfig/Image root=/dev/sda5 rootwait ro linux stable-rc/v3.18.35/arm64-defconfig/Image root=/dev/sda5 rootwait ro  grub> [PYBOOT] [seattle 01:48]: after linux load

grub> [PYBOOT] [seattle 01:50]: before dtb load

[PYBOOT] [seattle 01:50]: after dtb load boot boot EFI stub: Booting Linux Kernel...

[PYBOOT] [seattle 03:10]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seattle 03:11]: got exception: timeout ~$off

[PYBOOT] [seattle 03:12]: Done.

========================================================================

Board seattle-arm64-nosmp_defconfig failure log: -------------------------------------------------

Server IP address is 172.16.20.2 NBP filename is grubaa64.efi NBP filesize is 841728 Bytes

...

Checking Media Presence...... Media Present......

Downloading NBP file...

Succeed to download NBP file.  Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists possible device or file completions.

grub> [PYBOOT] [seattle 01:15]: grub: taking control.

[PYBOOT] [seattle 01:15]: before linux load linux stable-rc/v3.18.35/arm64-nosmp_defconfig/Image root=/dev/sda5 rootwait ro linux stable-rc/v3.18.35/arm64-nosmp_defconfig/Image root=/dev/sda5 rootw a it ro grub> [PYBOOT] [seattle 01:39]: after linux load

grub> [PYBOOT] [seattle 01:40]: before dtb load

[PYBOOT] [seattle 01:40]: after dtb load boot boot EFI stub: Booting Linux Kernel...

[PYBOOT] [seattle 03:01]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seattle 03:02]: got exception: timeout ~$off

[PYBOOT] [seattle 03:03]: Done.

========================================================================

Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.964935] mmci-pl18x 80114000.sdi4_per2: DMA channels RX dma0chan24, TX dma0chan25 [ 2.001098] sdhci: Secure Digital Host Controller Interface driver [ 2.007324] sdhci: Copyright(c) Pierre Ossman [ 2.013671] Synopsys Designware Multimedia Card Interface Driver [ 2.021453] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.030364] ledtrig-cpu: registered to indicate activity on CPUs [ 2.036834] usbcore: registered new interface driver usbhid [ 2.042449] usbhid: USB HID core driver [ 2.056396] TCP: cubic registered [ 2.059753] NET: Registered protocol family 17 [ 2.064300] can: controller area network core (rev 20120528 abi 9) [ 2.070587] NET: Registered protocol family 29 [ 2.075073] can: raw protocol (rev 20120528) [ 2.079345] can: broadcast manager protocol (rev 20120528 t) [ 2.085021] can: netlink gateway (rev 20130117) max_hops=1 [ 2.091003] Key type dns_resolver registered [ 2.095428] ThumbEE CPU extension supported. [ 2.099731] Registering SWP/SWPB emulation handler [ 2.106536] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.113098] mmc3: new high speed MMC card at address 0001 [ 2.118927] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.121002] mmcblk0: mmc3:0001 3.53 GiB [ 2.121124] mmcblk0boot0: mmc3:0001 partition 1 2.00 MiB [ 2.121246] mmcblk0boot1: mmc3:0001 partition 2 2.00 MiB [ 2.121337] mmcblk0rpmb: mmc3:0001 partition 3 128 KiB [ 2.131927] mmcblk0: p1 p2 p3 p4 [ 2.155395] db8500-esram12: disabling [ 2.159149] db8500-esram34: disabling [ 2.163085] V-CSI/DSI: disabling [ 2.166351] mmci-reg: disabling [ 2.169677] ALSA device list: [ 2.172668] No soundcards found. [ 2.176544] Waiting for root device /dev/mmcblk3p4...

[PYBOOT] [snowball 02:21]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 02:22]: got exception: timeout ~$off

[PYBOOT] [snowball 02:23]: Done.

========================================================================

Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------

[ 2.081146] nmk-i2c 80128000.i2c: write to slave 0x18 timed out [ 2.087127] nmk-i2c 80128000.i2c: no ack received after address transmission [ 2.291168] nmk-i2c 80128000.i2c: write to slave 0x18 timed out [ 2.297119] nmk-i2c 80128000.i2c: no ack received after address transmission [ 2.501068] nmk-i2c 80128000.i2c: write to slave 0x18 timed out [ 2.507141] nmk-i2c 80128000.i2c: no ack received after address transmission [ 2.514312] iio iio:device0: failed to read Who-Am-I register. [ 2.520538] st-accel-i2c: probe of 2-0018 failed with error -110 [ 2.537902] iio iio:device0: registered gyroscope l3g4200d [ 2.545715] iio iio:device1: DRDY on INT1 not available. [ 2.551300] st-magn-i2c: probe of 2-001e failed with error -22 [ 2.559051] iio iio:device1: DRDY on INT1 not available. [ 2.564636] st-press-i2c: probe of 2-005c failed with error -22 [ 2.577758] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.587860] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.610717] TCP: cubic registered [ 2.614074] NET: Registered protocol family 17 [ 2.618591] NET: Registered protocol family 35 [ 2.623138] NET: Registered protocol family 37 [ 2.627685] Registering SWP/SWPB emulation handler [ 2.634552] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.646972] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-01-31 22:38:41 UTC (949358321) [ 2.656219] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.663299] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.670318] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.677429] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.691528] db8500-esram12: disabling [ 2.695251] db8500-esram34: disabling [ 2.699157] V-CSI/DSI: disabling [ 2.702484] mmci-reg: disabling [ 2.705780] ALSA device list: [ 2.708740] #0: MOP500-card [ 2.712158] Waiting for root device /dev/mmcblk3p4...

[PYBOOT] [snowball 01:59]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 02:00]: got exception: timeout ~$off

[PYBOOT] [snowball 02:01]: Done.