Full logs are available at http://arm-soc.lixom.net/bootlogs/arm-soc/v3.19-rc3-18-g28f644c/
Failed boards:
capri arm-multi_v7_defconfig : FAILED 0:42.51 chitra powerpc-ppc64_defconfig : FAILED 0:47.05 cubie2 arm-multi_v7_defconfig : FAILED 2:36.76 minnowmax x86-minnowmax_defconfig : FAILED 0:43.16 rk3288evb arm-multi_v7_defconfig : FAILED 0:41.82 rk3288evb arm-multi_lpae_defconfig : FAILED 0:44.22 socfpga arm-multi_v7_defconfig : FAILED 1:03.93 trimslice arm-tegra_defconfig : FAILED 1:54.27 trimslice arm-multi_v7_defconfig : FAILED 2:20.22
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:13.08 arndale arm-exynos_defconfig : passed 1:22.58 arndale arm-multi_v7_defconfig : passed 1:41.21 arndale arm-multi_lpae_defconfig : passed 1:19.84 bbb arm-omap2plus_defconfig : passed 1:27.47 bbb arm-multi_v7_defconfig : passed 1:40.07 beaver arm-tegra_defconfig : passed 0:55.77 beaver arm-multi_v7_defconfig : passed 1:07.67 capri arm-bcm_defconfig : passed 0:41.54 chitra powerpc-pasemi_defconfig : passed 1:05.18 colombus arm-sunxi_defconfig : passed 0:56.34 colombus arm-multi_v7_defconfig : passed 1:28.28 colombus arm-multi_lpae_defconfig : passed 1:07.58 cosmic arm-imx_v6_v7_defconfig : passed 1:48.89 cosmic arm-multi_v7_defconfig : passed 1:31.21 cubie arm-sunxi_defconfig : passed 0:59.70 cubie arm-multi_v7_defconfig : passed 1:19.06 cubie2 arm-sunxi_defconfig : passed 0:55.06 cubie2 arm-multi_lpae_defconfig : passed 0:59.44 cubox arm-multi_v7_defconfig : passed 1:07.28 cubox arm-mvebu_v7_defconfig : passed 1:21.49 dalmore arm-tegra_defconfig : passed 1:12.95 dalmore arm-multi_v7_defconfig : passed 1:19.06 dalmore arm-multi_lpae_defconfig : passed 1:25.83 hummingboard arm-imx_v6_v7_defconfig : passed 1:32.31 hummingboard arm-multi_v7_defconfig : passed 1:24.39 jetsontk1 arm-tegra_defconfig : passed 0:52.60 jetsontk1 arm-multi_v7_defconfig : passed 1:11.71 jetsontk1 arm-multi_lpae_defconfig : passed 0:48.31 odroidu3 arm-exynos_defconfig : passed 1:06.10 omap5uevm arm-omap2plus_defconfig : passed 1:01.75 omap5uevm arm-multi_v7_defconfig : passed 1:22.55 omap5uevm arm-multi_lpae_defconfig : passed 1:33.63 pandaes arm-omap2plus_defconfig : warnings 1:43.26 pandaes arm-multi_v7_defconfig : passed 1:57.63 parallella arm-multi_v7_defconfig : passed 1:30.86 pi arm-exynos_defconfig : passed 1:01.26 pi arm-multi_v7_defconfig : passed 1:08.20 pi arm-multi_lpae_defconfig : passed 0:46.34 pit arm-exynos_defconfig : passed 1:01.82 pit arm-multi_v7_defconfig : passed 1:12.17 pit arm-multi_lpae_defconfig : passed 0:45.55 sama5 arm-sama5_defconfig : passed 1:48.83 seaboard arm-tegra_defconfig : passed 0:55.99 seaboard arm-multi_v7_defconfig : passed 1:06.80 snow arm-exynos_defconfig : passed 1:07.45 snow arm-multi_v7_defconfig : passed 1:33.86 snow arm-multi_lpae_defconfig : passed 1:10.14 snowball arm-multi_v7_defconfig : passed 3:14.86 wandboard arm-imx_v6_v7_defconfig : passed 1:11.13 wandboard arm-multi_v7_defconfig : passed 1:19.28
Offline boards:
snowball arm-u8500_defconfig : OFFLINE 1:27.07 socfpga arm-socfpga_defconfig : OFFLINE 1:45.86
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board capri-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 0.760000] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 c0c0c0c0 c0c0c0c0 [ 0.760000] [<c05c68a8>] (dev_uevent) from [<c046ef7c>] (kobject_uevent_env+0x1d4/0x4ec) [ 0.760000] [<c046ef7c>] (kobject_uevent_env) from [<c05c6348>] (device_add+0x390/0x520) [ 0.760000] [<c05c6348>] (device_add) from [<c05c6664>] (device_create_groups_vargs+0xac/0xbc) [ 0.760000] [<c05c6664>] (device_create_groups_vargs) from [<c05c6694>] (device_create_vargs+0x20/0x28) [ 0.760000] [<c05c6694>] (device_create_vargs) from [<c02d44dc>] (bdi_register+0x58/0xf0) [ 0.760000] [<c02d44dc>] (bdi_register) from [<c02d4598>] (bdi_register_dev+0x24/0x2c) [ 0.760000] [<c02d4598>] (bdi_register_dev) from [<c045df2c>] (add_disk+0x130/0x440) [ 0.760000] [<c045df2c>] (add_disk) from [<c05e2de8>] (loop_add+0x16c/0x1d8) [ 0.760000] [<c05e2de8>] (loop_add) from [<c0cb9d50>] (loop_init+0xf0/0x12c) [ 0.760000] [<c0cb9d50>] (loop_init) from [<c0208cd0>] (do_one_initcall+0x8c/0x1d4) [ 0.760000] [<c0208cd0>] (do_one_initcall) from [<c0c77db8>] (kernel_init_freeable+0x148/0x1e8) [ 0.760000] [<c0c77db8>] (kernel_init_freeable) from [<c092c9dc>] (kernel_init+0x8/0xe8) [ 0.760000] [<c092c9dc>] (kernel_init) from [<c020e8b8>] (ret_from_fork+0x14/0x3c) [ 0.760000] Code: bad PC value [ 0.765000] ---[ end trace 1cfe7f0284b8afb3 ]--- [ 0.765000] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 0.765000] [ 0.765000] CPU1: stopping [ 0.765000] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.19.0-rc3-00018-g28f644c #1 [ 0.765000] Hardware name: BCM281xx Broadcom Application Processor [ 0.765000] [<c021627c>] (unwind_backtrace) from [<c0211c90>] (show_stack+0x10/0x14) [ 0.765000] [<c0211c90>] (show_stack) from [<c092fb70>] (dump_stack+0x8c/0x9c) [ 0.765000] [<c092fb70>] (dump_stack) from [<c0214a74>] (handle_IPI+0x150/0x170) [ 0.765000] [<c0214a74>] (handle_IPI) from [<c020899c>] (gic_handle_irq+0x64/0x68) [ 0.765000] [<c020899c>] (gic_handle_irq) from [<c0212800>] (__irq_svc+0x40/0x54) [ 0.765000] Exception stack(0xea883f80 to 0xea883fc8) [ 0.765000] 3f80: ffffffed 00000000 ffffffed c021f7e0 c0d4049c c0d40500 00000000 00000000 [ 0.765000] 3fa0: ea882000 ea883fd0 c093d658 00000000 c0d41c7c ea883fc8 c020f380 c020f384 [ 0.765000] 3fc0: 60000153 ffffffff [ 0.765000] [<c0212800>] (__irq_svc) from [<c020f384>] (arch_cpu_idle+0x38/0x3c) [ 0.765000] [<c020f384>] (arch_cpu_idle) from [<c0276014>] (cpu_startup_entry+0x194/0x268) [ 0.765000] [<c0276014>] (cpu_startup_entry) from [<90208ac4>] (0x90208ac4) [ 0.765000] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 0.765000]
[PYBOOT] [capri 00:39]: got exception: panic ~$off
[PYBOOT] [capri 00:41]: Done.
========================================================================
Board chitra-powerpc-ppc64_defconfig failure log: -------------------------------------------------
PCI bus 8 slot 1/2: NEC uPD720100A USB 2.0 Host Controller (USB serial bus, interface 0x20, rev 0x04) [DEVI]Initializing Devices. SPI boot (mode 2) Configuration switch: 0x0000 Maxim MAX1238 12-channel ADC not found on SMBus channel 2 dev 0x35 Maxim MAX1238 12-channel ADC found on SMBus channel 2 dev 0x31 SIL24: 0 controllers, 0 disks found SATA unit 0: Disk, "SanDisk pSSD-S2 8GB", Capacity:7GB (lba48) MV60xx: 1 controllers, 1 disks found Initializing USB. PCI bus 8 slot 1/2: EHCI USB controller found at 80302000 USB bus 0 device 1: vendor 0000 product 0000 class 09: USB Hub PCI bus 8 slot 1/0: OHCI USB controller found at 80301000 USB bus 1 device 1: vendor 0000 product 0000 class 09: USB Hub PCI bus 8 slot 1/1: OHCI USB controller found at 80300000 USB bus 2 device 1: vendor 0000 product 0000 class 09: USB Hub CPU type 0x900102: 500MHz Total memory: 0x100000000 bytes (4096MB)
Total memory used by CFE: 0x7FECC440 - 0x80000000 (1260480) Initialized Data: 0x7FF7AA40 - 0x7FF7D430 (10736) BSS Area: 0x7FF7D430 - 0x7FF7FC00 (10192) Local Heap: 0x7FF7FC00 - 0x7FFFFC00 (524288) Stack Area: 0x7FFFFC00 - 0x80000000 (1024) Text (code) segment: 0x7FECC440 - 0x7FF6CC40 (657408) Relocation Factor: I:7FFCC440 - D:7FFCC440 [ENVI] [OFW ][UI ]max : HID0=8000000000000000, HID4=4400240000080180, HID5=0000006600000000 Requested state A4 (2000MHz) eth1: 1000BaseT FDX Device eth1: hwaddr 00-14-1E-FD-14-74, ipaddr 172.16.1.181, mask 255.255.255.0 gateway 172.16.1.1, nameserver 75.75.75.75, domain lixom.net Loader:elf Filesys:tftp Dev:eth1 File:172.16.1.3:/tmp/chitra.kernel Options:(null) Loading: 0x0000000000000000/21979904 [PYBOOT] [chitra 00:44]: Timed out waiting for "<type 'str'>":
[PYBOOT] [chitra 00:45]: got exception: timeout ~$off
[PYBOOT] [chitra 00:46]: Done.
========================================================================
Board cubie2-arm-multi_v7_defconfig failure log: -------------------------------------------------
spl: not an uImage at 1600
U-Boot 2013.10-rc2-00709-g3977e12 (Oct 18 2013 - 16:12:20) Allwinner Technology
CPU: Allwinner A20 (SUN7I) Board: Cubieboard2 I2C: ready DRAM: 1 GiB MMC: SUNXI SD/MMC: 0 In: serial Out: serial Err: serial Net: emac Hit any key to stop autoboot: 3 2 1 0 reading uEnv.txt ** Unable to read file uEnv.txt ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** reading boot.scr ** Unable to read file boot.scr ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** reading script.bin ** Unable to read file script.bin ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** sun7i# [PYBOOT] [cubie2 02:32]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cubie2 02:33]: got exception: timeout ~$off
[PYBOOT] [cubie2 02:34]: Done.
========================================================================
Board minnowmax-x86-minnowmax_defconfig failure log: -------------------------------------------------
Connected to minnowmax console [channel connected] (~$quit to exit)~$open
~$hardreset
Command(minnowmax console)> open console already open
Command(minnowmax console)> hardreset (user:build) Reset target node minnowmax status: off node minnowmax status: on
SecStartup MemoryInit Done BdsEntry
[2J[01;01H[=3h[2J[01;01H[2J[01;01H[=3h[2J[01;01H[2J[01;01H[=3h[2J[01;01H[2J[01;01H[=3h[2J[01;01H[2J[01;01H[=3h[2J[01;01H[2J[01;01H[=3h[2J[01;01H[0m[35m[40m[2J[01;01H[=3h[2J[01;01H[2J[01;01H[=3h[2J[01;01H[2J[01;01H[=3h[2J[01;01H[2J[01;01H[=3h[2J[01;01H[2J[01;01H[=3h[2J[01;01H[2J[01;01H[=3h[2J[01;01H[0m[35m[40m[2J[01;01H[0m[37m[40m..ELILO v3.14 for EFI/x86_64
[PYBOOT] [minnowmax 00:39]: Timed out waiting for "<type 'str'>": Loading kernel tmp/minnowmax.kernel... done LocateHandle GopProtocol failed. --Either no graphics head is installed, --efi console is set to serial, or, --the EFI firmware version of this machine is --older than UEFI 2.0. and does not support GOPyou can SAFELY IGNORE this error. elilo will default to text-mode. Alternatively you can now force text mode by setting config variable text_mode=1 for x86 in elilo.conf or via cmdline.
However if this is the last text output you see ensure that your kernel console command line variable matches up with the actual efi boot menu console output settings.
[PYBOOT] [minnowmax 00:40]: got exception: timeout ~$off
[PYBOOT] [minnowmax 00:42]: Done.
========================================================================
Board rk3288evb-arm-multi_lpae_defconfig failure log: -------------------------------------------------
Wrote coreboot table at: 7fbfc000, 0x214 bytes, checksum 8a5c coreboot table: 556 bytes. CBMEM ROOT 0. 7fbff000 00001000 TIME STAMP 1. 7fbfe000 00001000 COREBOOT 2. 7fbfc000 00002000 BS: BS_WRITE_TABLES times (us): entry 2 run 57632 exit 2 Loading segment from rom address 0x01100058 code (compression=1) New segment dstaddr 0x43104040 memsize 0x1036ee0 srcaddr 0x1100090 filesize 0x9674 Loading segment from rom address 0x01100074 Entry Point 0x43104041 Loading Segment: addr: 0x0000000043104040 memsz: 0x0000000001036ee0 filesz: 0x0000000000009674 lb: [0x0000000000000000, 0x0000000000013188) Post relocation: addr: 0x0000000043104040 memsz: 0x0000000001036ee0 filesz: 0x0000000000009674 using LZMA [ 0x43104040, 431146dc, 0x4413af20) <- 01100090 Clearing Segment: addr: 0x00000000431146dc memsz: 0x0000000001026844 dest 43104040, end 4413af20, bouncebuffer fffd9cf0 Loaded segments BS: BS_PAYLOAD_LOAD times (us): entry 2 run 129442 exit 2 Jumping to boot code at 43104041 entry = 43104041
Starting netboot on veyron... Initializing DWC_HCD USB controller at 0xff580000. Initializing DWC_HCD USB controller at 0xff540000. Initializing EHCI USB controller at 0xff500000. Looking for network device... done. Waiting for link... done. MAC: c0:c1:c0:4b:d7:79 Sending DHCP discover... done. Waiting for reply... [PYBOOT] [rk3288evb 00:41]: Timed out waiting for "<type 'str'>": Receive failed.
[PYBOOT] [rk3288evb 00:42]: got exception: timeout ~$off
[PYBOOT] [rk3288evb 00:43]: Done.
========================================================================
Board rk3288evb-arm-multi_v7_defconfig failure log: -------------------------------------------------
New segment dstaddr 0x43104040 memsize 0x1036ee0 srcaddr 0x1100090 filesize 0x9674 Loading segment from rom address 0x01100074 Entry Point 0x43104041 Loading Segment: addr: 0x0000000043104040 memsz: 0x0000000001036ee0 filesz: 0x0000000000009674 lb: [0x0000000000000000, 0x0000000000013188) Post relocation: addr: 0x0000000043104040 memsz: 0x0000000001036ee0 filesz: 0x0000000000009674 using LZMA [ 0x43104040, 431146dc, 0x4413af20) <- 01100090 Clearing Segment: addr: 0x00000000431146dc memsz: 0x0000000001026844 dest 43104040, end 4413af20, bouncebuffer fffd9cf0 Loaded segments BS: BS_PAYLOAD_LOAD times (us): entry 2 run 129451 exit 2 Jumping to boot code at 43104041 entry = 43104041
Starting netboot on veyron... Initializing DWC_HCD USB controller at 0xff580000. Initializing DWC_HCD USB controller at 0xff540000. Initializing EHCI USB controller at 0xff500000. Looking for network device... done. Waiting for link... done. MAC: c0:c1:c0:4b:d7:79 Sending DHCP discover... done. Waiting for reply... Receive failed. done. Sending DHCP request... done. Waiting for reply... done. My ip is 172.16.1.146 The DHCP server ip is 172.16.1.1 TFTP server IP predefined by user: 172.16.1.3 Bootfile predefined by user: /tmp/rk3288evb.kernel Sending tftp read request... done. Waiting for the transfer... ###################################################################################################################### [PYBOOT] [rk3288evb 00:38]: Timed out waiting for "<type 'str'>": ###################################################################################################################################### [PYBOOT] [rk3288evb 00:39]: got exception: timeout ~$off
[PYBOOT] [rk3288evb 00:40]: Done.
========================================================================
Board socfpga-arm-multi_v7_defconfig failure log: -------------------------------------------------
################################################################# ################################################################# ################################################################# ################################################################# # 2.3 MiB/s done Bytes transferred = 5729488 (576cd0 hex) SOCFPGA_CYCLONE5 # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 SOCFPGA_CYCLONE5 # tftp 0x3000000 tmp/socfpga-dCK47h/socfpga_cyclone5_socdk.dtb tftp 0x3000000 tmp/socfpga-dCK47h/socfpga_cyclone5_socdk.dtb Using mii0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.137 Filename 'tmp/socfpga-dCK47h/socfpga_cyclone5_socdk.dtb'. Load address: 0x3000000 Loading: *## 2.1 MiB/s done Bytes transferred = 15361 (3c01 hex) SOCFPGA_CYCLONE5 # bootz 0x1000000 - 0x3000000 ; bootm 0x1000000 - 0x3000000
[PYBOOT] [socfpga 00:26]: u-boot: jumping to kernel image bootz 0x1000000 - 0x3000000 ; bootm 0x1000000 - 0x3000000 ## Flattened Device Tree blob at 03000000 Booting using the fdt blob at 0x03000000 reserving fdt memory region: addr=0 size=1000 Loading Device Tree to 03ff9000, end 03fffc00 ... OK
Starting kernel ...
[PYBOOT] [socfpga 00:26]: u-boot: started kernel.
[PYBOOT] [socfpga 01:01]: Timed out waiting for "<type 'str'>":
[PYBOOT] [socfpga 01:02]: got exception: timeout ~$off
[PYBOOT] [socfpga 01:03]: Done.
========================================================================
Board trimslice-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.502585] sdhci-tegra c8000600.sdhci: No vmmc regulator found [ 1.508505] sdhci-tegra c8000600.sdhci: No vqmmc regulator found [ 1.514505] mmc1: Invalid maximum block size, assuming 512 bytes [ 1.550359] mmc1: SDHCI controller on c8000600.sdhci [c8000600.sdhci] using ADMA [ 1.558406] ledtrig-cpu: registered to indicate activity on CPUs [ 1.564581] usbcore: registered new interface driver usbhid [ 1.570146] usbhid: USB HID core driver [ 1.576107] usbcore: registered new interface driver snd-usb-audio [ 1.586597] tlv320aic23-codec 2-001a: Control not supported for path LLINEIN -> [NULL] -> Line Input [ 1.595733] tlv320aic23-codec 2-001a: ASoC: no dapm match for LLINEIN --> NULL --> Line Input [ 1.604252] tlv320aic23-codec 2-001a: ASoC: Failed to add route LLINEIN -> NULL -> Line Input [ 1.612768] tlv320aic23-codec 2-001a: Control not supported for path RLINEIN -> [NULL] -> Line Input [ 1.621889] tlv320aic23-codec 2-001a: ASoC: no dapm match for RLINEIN --> NULL --> Line Input [ 1.630402] tlv320aic23-codec 2-001a: ASoC: Failed to add route RLINEIN -> NULL -> Line Input [ 1.638916] tlv320aic23-codec 2-001a: Control not supported for path MICIN -> [NULL] -> Mic Input [ 1.647783] tlv320aic23-codec 2-001a: ASoC: no dapm match for MICIN --> NULL --> Mic Input [ 1.656043] tlv320aic23-codec 2-001a: ASoC: Failed to add route MICIN -> NULL -> Mic Input [ 1.664872] tegra-snd-trimslice sound: tlv320aic23-hifi <-> 70002800.i2s mapping ok [ 1.674071] TCP: cubic registered [ 1.677414] NET: Registered protocol family 17 [ 1.681878] can: controller area network core (rev 20120528 abi 9) [ 1.688113] NET: Registered protocol family 29 [ 1.692576] can: raw protocol (rev 20120528) [ 1.696858] can: broadcast manager protocol (rev 20120528 t) [ 1.702530] can: netlink gateway (rev 20130117) max_hops=1 [ 1.708310] Key type dns_resolver registered [ 1.712823] ThumbEE CPU extension supported. [ 1.717118] Registering SWP/SWPB emulation handler [ 1.726966] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 1.733927] rtc-em3027 2-0056: setting system clock to 2015-01-09 03:05:41 UTC (1420772741) [ 1.746628] ALSA device list: [ 1.749592] #0: tegra-trimslice [ 1.753489] Waiting for root device /dev/sda1...
[PYBOOT] [trimslice 02:17]: Timed out waiting for "<type 'str'>":
[PYBOOT] [trimslice 02:18]: got exception: timeout ~$off
[PYBOOT] [trimslice 02:19]: Done.
========================================================================
Board trimslice-arm-tegra_defconfig failure log: -------------------------------------------------
[ 1.685897] tlv320aic23-codec 2-001a: Control not supported for path LLINEIN -> [NULL] -> Line Input [ 1.695071] tlv320aic23-codec 2-001a: ASoC: no dapm match for LLINEIN --> NULL --> Line Input [ 1.703630] tlv320aic23-codec 2-001a: ASoC: Failed to add route LLINEIN -> NULL -> Line Input [ 1.713191] tlv320aic23-codec 2-001a: Control not supported for path RLINEIN -> [NULL] -> Line Input [ 1.722323] tlv320aic23-codec 2-001a: ASoC: no dapm match for RLINEIN --> NULL --> Line Input [ 1.731871] tlv320aic23-codec 2-001a: ASoC: Failed to add route RLINEIN -> NULL -> Line Input [ 1.740400] tlv320aic23-codec 2-001a: Control not supported for path MICIN -> [NULL] -> Mic Input [ 1.749292] tlv320aic23-codec 2-001a: ASoC: no dapm match for MICIN --> NULL --> Mic Input [ 1.757574] tlv320aic23-codec 2-001a: ASoC: Failed to add route MICIN -> NULL -> Mic Input [ 1.769631] tegra-snd-trimslice sound: tlv320aic23-hifi <-> 70002800.i2s mapping ok [ 1.781110] TCP: cubic registered [ 1.784720] NET: Registered protocol family 10 [ 1.791554] mip6: Mobile IPv6 [ 1.794523] sit: IPv6 over IPv4 tunneling driver [ 1.803156] NET: Registered protocol family 17 [ 1.807646] NET: Registered protocol family 15 [ 1.812103] can: controller area network core (rev 20120528 abi 9) [ 1.818504] NET: Registered protocol family 29 [ 1.822964] can: raw protocol (rev 20120528) [ 1.827231] can: broadcast manager protocol (rev 20120528 t) [ 1.832919] can: netlink gateway (rev 20130117) max_hops=1 [ 1.838610] Bluetooth: RFCOMM socket layer initialized [ 1.843782] Bluetooth: RFCOMM ver 1.11 [ 1.847546] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.852883] Bluetooth: BNEP socket layer initialized [ 1.857844] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.863783] Bluetooth: HIDP socket layer initialized [ 1.869844] Registering SWP/SWPB emulation handler [ 1.879443] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 1.886924] rtc-em3027 2-0056: setting system clock to 2015-01-09 03:03:49 UTC (1420772629) [ 1.906210] ALSA device list: [ 1.909205] #0: tegra-trimslice [ 1.913145] Waiting for root device /dev/sda1...
[PYBOOT] [trimslice 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [trimslice 01:52]: got exception: timeout ~$off
[PYBOOT] [trimslice 01:53]: Done.